* CI: add Windows Integration Tests for .NET
see https://github.com/sshnet/SSH.NET/pull/1702#issuecomment-3342506642
* fix podman setup with Windows and .NET
* debug
* x
* x
* x
* revert
* Run Windows .NET tests in separate job
so they run in parallel and we avoid the Common_CreateMoreChannelsThanMaxSessions test failure.
* fix coverlet artifacts
* fix missing PermitTTY in RemoteSshdConfig Reset
this fixes a test failure in Common_CreateMoreChannelsThanMaxSessions
when running the tests multiple times against the same SSH server
instance.
see https://github.com/sshnet/SSH.NET/pull/1704#issuecomment-3343210311
* speed up Windows tests
turns out this is caused by DNS resolution taking about
2 seconds on every new connection...
* add windows integration tests to Publish needs:
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
Co-authored-by: Robert Hague <rh@johnstreetcapital.com>
* Fix SftpFileAttributes file type detection
To get the file type, S_IFMT should be used as the mask. Instead it was using each file
type as the mask. It meant that e.g. a symbolic link would also show as a regular file
and a character device.
Also allow setting and retrieving the setuid/setgid/sticky bits
* fix build
The message loop currently sits in a call to Poll until the socket has data to read or
it is closed. This is unnecessary - it can equally just sit in the call to Receive.
The call to Poll in Session.IsConnected is also unnecessary - we can instead just call
Socket.Connected. This only returns the connection state as of the last operation, but
we are always performing operations in the message loop (or else we are not connected),
so it should work equally well while being cheaper.
Lastly, when shutting down the socket, shut down both sides rather than just the sending
side (SocketShutdown.Both rather than SocketShutdown.Send) - at this point we do not care
about reading anything else. This makes it (more) certain that we will break out of the
Receive call in the message loop, as has been noted in #355 for whatever remaining issues
still exist there.
* Use BCL Curve25519 when possible
* Update KeyExchangeMLKem768X25519Sha256 and KeyExchangeSNtruP761X25519Sha512
* Split Start and Finish methods for inheritance
* Some refactor
* Update src/Renci.SshNet/Security/KeyExchangeEC.BclImpl.cs
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* revert
* Create dedicated KeyExchangeECCurve25519 BclImpl
* cleanup
* minor code refactor
* integration test
* Revert "integration test"
This reverts commit 326962664c.
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Bump actions/checkout from 4 to 5
* Bump actions/upload-pages-artifact from 3 to 4
* Bump actions/download-artifact from 4 to 5
* Bump the dependencies group with 5 updates
* fix
* fix locally failing portforwarding tests
port already in use
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
When the key exchange produces less key material than is needed for the cipher or hmac
algorithms, there is an iterative procedure to produce more.
For example, a SHA-1 key exchange algorithm produces 20 bytes of key material.
A SHA-256 hmac uses a 32 byte key, so one iteration of the procedure produces another
20 bytes of key material for a total of 40 which is sufficient for the hmac key.
The library works correctly in such cases of one iteration, but the logic is wrong if
more than one iteration is needed. In #1660, the connection uses a SHA-1 kex algorithm
with a SHA-512 hmac (64 byte key), requiring 3 iterations of the extension procedure and
resulting in an error upon connection.
This change fixes the logic to use the output of the previous iteration per the spec.
closes#1660
SftpClient.CreateText does not truncate the file if it exists, contrary to
System.IO.File.CreateText which does. It is documented, but seems pretty
unintuitive and more like a mistake than a concious decision.
I considered leaving this 14 year old behaviour as it is, but turns out other
people have hit it as well (it also affects WriteAll{Bytes/Text/Lines}).
* Bump the dependencies group with 4 updates
Bumps BouncyCastle.Cryptography from 2.6.1 to 2.6.2
Bumps Meziantou.Analyzer from 2.0.205 to 2.0.210
Bumps MSTest from 3.9.3 to 3.10.0
Bumps SonarAnalyzer.CSharp from 10.13.0.120203 to 10.15.0.120848
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
The recently added UploadFileAsync effectively calls stream.CopyToAsync(SftpFileStream).
This is slower than the sync UploadFile (by about 4x in a local test) because the sync
version sends multiple write requests concurrently, without waiting for each response
in turn like the stream-based version does.
This change adapts the sync code for async and uses it to bring the performance of
UploadFileAsync in line with that of UploadFile.
* Refactor logging to allow a loggerfactory per session specified in the ConnectionInfo.
This commit introduces an `ILoggerFactory` to various classes, replacing the static logger factory with an instance-based approach for more flexible and session-specific logging. These changes improve the logging framework's flexibility and maintainability and allow unit testing of logging.
* Improvements bases on feedback. Fixed tests. Added documentation.
* Update src/Renci.SshNet/ConnectionInfo.cs
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Bump the dependencies group with 5 updates
Signed-off-by: dependabot[bot] <support@github.com>
* seal types not publicly instantiable (ma0053)
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Fixes spelling errors in comments, private members, and public members in test projects
* Adds en-GB as spell checker option; reverts notable cases of American English
* convert file UTF-16 LE BOM -> UTF-8
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
The library currently allocates 4 bytes (and some) for every 1 byte of file
downloaded(*). It could be 0. This takes it to 3.
(*)
1. Array allocated for read of encrypted packet from socket
2. Array for decrypted packet
3. Array for channel data (removed in this change)
4. Array for sftp data packet
The sftp packet stream runs within but independently of the channel data stream,
meaning a channel data packet can contain multiple sftp packets, or an sftp packet
can be split across multiple channel data packets.
Normally the packets are sized such there is a 1-to-1 relationship for efficiency.
When this doesn't happen the library falls back to buffering via a List<byte>,
which is not so efficient. This change uses an array-based buffer instead.
In a sample download which hit this fallback I see about a 20% reduction in memory
allocated.
The library currently does not check for matching host key algorithms until needed
at the end of the key exchange, in contrast to other algorithm types which are checked
beforehand. This leads to confusing or uninformative errors, normally from the server
(correctly) closing the connection.
This change moves that check alongside the rest of them, and also improves the error
messages that arise from no matching algorithms.
* Added GetAttributesAsync to SftpClient
* Adding integration tests + unit test
* Address warnings in test classes.
---------
Co-authored-by: William Decker <william.decker@syndigo.com>
Where beneficial, add additional overrides from the base Stream class. Namely the Span
variants and for PipeStream, the WriteAsync variants (see comments).
The change also adds an internal type borrowed from the runtime repo for easier buffer
management, which could also be used elsewhere.
Wireshark can already helpfully dissect the initial SSH handshake. When given the
session keys, it can also dissect the encrypted traffic for inspection/debugging.
This adds a helper in Debug mode to write out that information in the format
Wireshark requires.
Usage is to set `SshNetLoggingConfiguration.WiresharkKeyLogFilePath` before connecting, and supply the same value to Wireshark in Edit -> Preferences -> Protocols
-> SSH -> "Key log filename".
The description of the format is at https://wiki.wireshark.org/SSH#key-log-format
Marius Thesing