GNU sed defaults to block-buffered stdout when stdout is a pipe
(GitHub Actions runner). Accumulates 4-64KB before flushing, so
test output appeared in sporadic batches unaligned to test
boundaries. -u flag forces line-buffered output so each go test -v
line surfaces in the Actions UI as it is produced.
Side effect: none. No process count change, no SSH session change,
no test execution change. Pure output flushing on the runner host.
Pull the on.push branch trigger so the workflow only fires from
workflow_dispatch — matches the e2e-ddil.yml Phase-1 pattern. Push
trigger lifts again once the single-node Go port (mulga-siv-89) is
green end-to-end and run-e2e.sh is retired.
A cancelled run on the single-runner ci-single host has been leaving
orphan tofu/terraform procs (and stale tfstate locks) behind, which
caused the next push's tofu destroy to hang for 45m+ and saturate the
runner host until sshd refused new connections.
- Add `concurrency: e2e-go-${ref}, cancel-in-progress: true` so a new
push to feat/e2e-go-harness cancels the in-flight run instead of
stacking on the same self-hosted runner.
- New `Reap Orphan Procs` step at job start: SIGTERM then SIGKILL any
lingering `tofu`/`terraform` from the runner user, and unlink any
stale `.terraform.tfstate.lock.info`.
- Harden `Teardown`: drop `set -e` (scrub-env must always run as the
libvirt-level fallback), reap orphans before destroy, and wrap
`tofu destroy` in `timeout 600` so a wedged provider can't pin the
job to its 45m timeout.
Two display bugs spotted on the previous run:
1. Phase banners came out white instead of bold-cyan because the test
binary runs over SSH on the tofu VM, where neither GITHUB_ACTIONS
nor a TTY is present, so harness.log.go init() disables ANSI escapes.
Fix: export GITHUB_ACTIONS=true and FORCE_COLOR=1 in the remote env
so the helper keeps emitting color codes.
2. Every t.Logf line still rendered as
lb_test.go:61: instance type: t3.nano
(4-space indent + `<file>:<line>:` prefix) because t.Helper()
bubbles file:line to the call site. Fix: pipe the test binary's
stdout through `sed -E 's/^[[:space:]]+([a-zA-Z0-9_]+_test\.go:[0-9]+: )?//'`
so the display strips both. Tee to the artifact log happens BEFORE
the sed so raw output is preserved for triage; only the live UI
sees the cleaned form.
Pretty up the live Actions log without flooding it. Three changes:
1. .github/scripts/ci-fmt.sh — sourceable bash helpers (banner, ok, bad,
warn, note, quiet_run) using ANSI colors that the Actions UI renders.
2. e2e-go.yml + e2e-ddil.yml — tofu phases switch back to quiet redirect
into $TOFU_LOG (the previous tee'd version regressed live noise vs
the original silent redirect). Each phase now prints one colored
ok/✗ line; on failure the tail of $TOFU_LOG dumps inside a single
collapsed group, so the live log stays scannable but the failing tail
is one click away.
3. junit-report render.py — compact summary: short status icons (✅/❌)
in a single column, no separate err column, single-line failure list
(truncated to 120 chars) instead of <details> blocks that wrap badly
on narrow screens.
Per-suite test runs still wrap in ::group:: with an inline cyan banner
so pass output collapses and the suite name is obvious when expanded.
Add a reusable composite action (.github/actions/junit-report) that parses
a glob of JUnit XML files, writes a totals table + collapsible per-failure
details into $GITHUB_STEP_SUMMARY, and emits one ::error annotation per
failed/errored test case so failures surface in the run header instead of
being buried in step logs.
Apply the action to both e2e-go.yml and e2e-ddil.yml (e2e-ddil gotestsum
now also emits --junitfile so the action has input).
Same workflows also wrap noisy phases (tofu apply/destroy, scrub-env,
tar-over-ssh, per-suite test runs, cluster-log collection) in
::group::/::endgroup:: markers so the Actions UI collapses the chatter
by default and the human can expand only the failing phase. Tofu output
still tees to $TOFU_LOG so the artifact bundle is unchanged.
Future workflows (multinode, baremetal) can adopt the same pattern via
the README in .github/actions/junit-report.
Replaces the source-tree + go + gotestsum payload that the e2e-go.yml
workflow previously shipped to the tofu CI VM with self-contained
test binaries built on the runner via `go test -c`. testdata for the
LB suite is already //go:embed'd into the binaries, so the bundle on
the VM is just `<suite>.test` files (cert: 14M, lb: 17M uncompressed).
Workflow changes
- actions/setup-go on runner.
- New step builds binaries via `make e2e-build SUITES_BUILD=...`.
- Install go-junit-report on runner; convert each VM-side test log to
junit-<suite>.xml after artifact pull so "Publish test summary" still
parses JUnit XML.
- Drop "Install Go + gotestsum on VM" entirely (saves ~60s + network).
- Drop source-shipping rsync/tar (saves ~30s + a lot of bandwidth).
- VM step runs `./<suite>.test -test.v -test.timeout=30m` directly.
Makefile changes
- New `e2e-build` target compiles each `SUITES_BUILD` entry into
`BIN_DIR/<suite>.test` via `go test -c -tags=e2e`. `clean` also
removes BIN_DIR.
Closes mulga-siv-80.
bootstrap-install.sh ships a minimal binary VM with no rsync; the
ship-source and collect-artifacts steps failed with
'rsync: command not found'. Stream a tarball over ssh instead — same
exclude list, no extra dependency on the VM.
Single-node tofu VM only has the spx binary + bash test bundle at
~/e2e-tests; the Go e2e workflow was running 'make -C tests/e2e e2e-cert'
from $HOME/Development/mulga/spinifex which doesn't exist, producing:
make: *** No rule to make target 'e2e-cert'. Stop.
Add a checkout of the spinifex repo on the runner and rsync it (minus
.git, build/, bin/, node_modules) to the VM as
~/Development/mulga/spinifex before installing Go + gotestsum.
Interim solution; mulga-siv-80 tracks replacing the rsync with shipping
pre-built test binaries from the runner.
gotestsum v1.12.0 pins golang.org/x/tools v0.19.0 which fails to compile
under Go 1.26 with:
invalid array length -delta * delta (constant -256 of type int64)
Switching to @latest pulls a newer x/tools that builds clean.
The tofu-provisioned VM ships with the spx binary and bash test scripts
but no go toolchain, so the prior workflow's "Install gotestsum on VM"
step failed with `bash: line 2: go: command not found`. Add a curl-based
Go 1.26.3 install (matching go.mod) ahead of the gotestsum install and
update the test step's PATH so make e2e-* runs the freshly-installed
go binary.
Standalone workflow runs the new Go-based E2E harness on the existing
ci-single self-hosted runner — provisions a tofu VM, bootstraps spinifex,
installs gotestsum, runs each requested suite via the e2e Makefile, and
uploads per-test artifacts + JUnit XML + JSON streams as a build artifact.
Test summary parses the JUnit and emits ::error file=...:: annotations so
failures surface in the PR diff.
Gated to the feat/e2e-go-harness branch + workflow_dispatch so it doesn't
interfere with the existing e2e.yml while the Go conversion lands.
tests/e2e/Makefile gains a GOTESTSUM=1 opt-in: when set, the e2e target
runs gotestsum with --junitfile and --jsonfile rooted in ARTIFACT_DIR
under a suite-tagged filename derived from the first PKG component.
* feat(vm): direct-boot foundations + config/input extensions + image build pipeline
vm package (mulga-siv-62):
- Add KernelImage, Initrd, KernelCmdline, FwCfg/FwCfgEntry to vm.Config
- Emit -kernel/-initrd/-append/-fw_cfg args when fields set
- Relax drive invariant: accept kernel image in place of drives
- Add devices.go: IsMMIO predicate, NetDevice/BlkDevice/RngDevice helpers
- Refactor lifecycle.go + network_helpers.go call sites to use helpers
- shutdown.go: os.Remove fw_cfg tmpfiles after QEMU exits
- Add devices_test.go, microvm_test.go; extend vm_test.go
config/input extensions (mulga-siv-63):
- Add MicrovmConfig{ELBv2Enabled, ImagePath} to DaemonConfig
- ImagePath falls back to /usr/share/spinifex/microvm when empty
- Add commented [microvm] section to spinifex.toml template
- Add DirectBoot bool + NICs []NICConfig to SystemInstanceInput
image build pipeline (mulga-siv-64):
- scripts/build-microvm-image.sh: Alpine chroot build producing vmlinuz + initramfs.cpio.gz
- build/microvm/init.sh: fw_cfg-driven PID 1 init (mounts, modprobe, NIC config, lb-agent-env, ca-cert)
- build/microvm/inittab: BusyBox init with lb-agent respawn
- make build-microvm-image target
- setup.sh: install microvm/* to /usr/share/spinifex/microvm/
- .gitignore: exclude built vmlinuz + initramfs.cpio.gz artifacts
* feat(daemon): direct-boot launch path for microvm system instances
When SystemInstanceInput.DirectBoot=true:
- Skip GetAMIConfig and GenerateVolumes
- Build vm.Config directly (no buildBaseVMConfig, no PCIe root ports)
- MachineType=microvm,x-option-roms=off,pic=off,pit=off,rtc=on,acpi=on,isa-serial=on
- Resolve kernel/initrd from Microvm.ImagePath config field
- Serialise NICs to three fw_cfg tmpfiles (netcfg, lb-agent-env, ca-cert)
- Validate exactly one NICConfig.IsDefault=true before writing netcfg blob
- Shutdown path cleans up tmpfiles via existing Config.FwCfg iteration
PC-machine path (DirectBoot=false) unchanged.
Closes mulga-siv-65
* feat(elbv2): wire microvm.elbv2_enabled flag into ELBv2 service
When ELBv2Enabled=true:
- Drop lbVMUserData cloud-config; emit KEY=value LBAgentEnv blob instead
- Set SystemInstanceInput.DirectBoot=true; omit ImageID
- Populate NICs []NICConfig (index 0=primary ENI IsDefault, 1=mgmt, 2+=extra ENIs)
- Validate exactly one IsDefault NIC at service layer
When ELBv2Enabled=false: existing PC-machine path unchanged.
Adds buildLBAgentEnv, buildMicrovmNICs, subnetCIDRForIP, subnetGatewayIP helpers.
Tests in arn_test.go cover both flag-on and flag-off paths.
Closes mulga-siv-66
* test(daemon,vm): add unit tests for direct-boot helpers to meet diff coverage threshold
* feat(daemon): Phase 1 perf instrumentation + e2e runner microvm flag
- Log t1→t2 boot timing via slog on the direct-boot path
- measureQEMURSSMiB helper reads /proc/<pid>/status (tested)
- Gate constants: phase1BootGateMs=500, phase1RSSGateMiB=25
- run-lb-e2e.sh: --microvm flag, dual-path CI annotation, density test note
Closes mulga-siv-67
* fix(build): remove busybox-initscripts — not in Alpine 3.20, not needed
* fix(microvm): end-to-end fixes for direct-boot LB path
Serial output was silent (x-option-roms=off suppresses BIOS serial init);
fixed by removing it from the machine string and using -serial chardev:console0
to attach to the machine-created ISA serial device instead of adding a
duplicate isa-serial device (which would create ttyS1 while kernel uses ttyS0).
virtio-net interfaces were invisible to the kernel because QEMU's
auto-kernel-cmdline does not append virtio_mmio.device= params when -append
is used. Fixed by generating explicit virtio_mmio.device=0x200@0xfebNNNNN:N
params for each NIC in KernelCmdline, and modprobing virtio_mmio + virtio_net
in init.sh.
sys.micro bumped to 512 MiB — 128 MiB caused kernel OOM during initramfs
decompression (~68 MiB uncompressed).
BusyBox init ::respawn: entries do not source or export env files; fixed
inittab to use set -a; . /etc/conf.d/lb-agent; set +a before exec.
wireLBAgentConfig was documented as reading the CA cert but never set
elbv2Service.CACert; lb-agent TLS handshakes to AWSGW failed with
x509: certificate signed by unknown authority. Fixed by reading
d.config.NATS.CACert (same local CA that signs the AWSGW server cert)
and assigning to elbv2Service.CACert so writeFwCfgBlobs writes a
non-empty cacert blob into fw_cfg.
Adds vm_test TestExecute_MicrovmFileChardev and updates lifecycle_test
to assert SerialSocket is intentionally empty on direct-boot VMs.
* fix(build): auto-detect docker/podman when apk unavailable for microvm image build
* fix(build): create /dev/console and /dev/null as proper device nodes in initramfs
tar extraction without root silently demotes device files to 0-byte regular
files (mknod requires CAP_MKNOD). The kernel opens /dev/console when wiring
init's stdio to the serial console; a regular file there causes all init output
to be silently discarded to RAM — the VM appears stuck at 'Run /init as init
process' with no subsequent console output and lb-agent never heartbeats.
Fix: after rootfs population, wipe /dev and recreate console (c 5 1) and
null (c 1 3) via sudo mknod. devtmpfs provides all other devices at runtime
once init.sh mounts it.
* fix(microvm): fix mgmt NIC routing for all LB schemes
Two bugs prevented lb-agent from reaching the AWSGW via the mgmt interface:
1. RouteDst/RouteVia swapped — resolveMgmtRoute returns (gateway, target) but
buildMicrovmNICs assigned them as (Dst=gateway, Via=target), producing
'ip route add 10.15.8.1 via 192.168.1.33' instead of the correct
'ip route add 192.168.1.33 via 10.15.8.1'.
2. NIC[1] MAC and CIDR never filled — the daemon allocates mgmt IP/MAC
after buildMicrovmNICs returns, but didn't inject them into input.NICs[1]
before calling writeFwCfgBlobs, leaving NIC1_MAC= empty in the netcfg
blob and skipping interface setup in init.sh entirely.
Also extends mgmt routing to internet-facing scheme in the microvm path:
VPC SNAT is not reliable across all VPC topologies for control-plane
heartbeats; mgmt is always a direct L2 path to the host.
* feat(microvm): Phase 2 kernel stripping + boot optimisation
- cpu: switch to host,-pmu (disable PMU — not needed in microvm guest)
- machine type: make isa-serial configurable via microvm.isa_serial config
field; default true (on) preserves console log path
- build: strip unused kernel modules (USB, IDE, ATA, GPU, media, input,
HID, bluetooth, staging, sound, wireless) from initramfs before cpio
- build: add Phase 2 artifact size gate — fail if vmlinuz + initramfs.cpio.gz
exceeds MICROVM_ARTIFACT_MAX_MiB (default 50 MiB); override via env var
during development
- perf: add phase2BootGateMs=300 and phase2ArtifactGateMiB=50 constants
with canary tests to catch unintentional gate changes
- tests: cover buildMicrovmNICs nil-VPC and extra-ENI paths
- tests: cover microvmMachineType nil/true/false branches
* fix(build): use find-based virtio+fw_cfg module keep-list in initramfs strip
The directory-only keep-list (drivers/virtio, drivers/firmware) missed
virtio_net.ko which lives in drivers/net/, virtio_blk in drivers/block/,
and virtio-rng in drivers/char/hw_random/. Switch to find-based approach:
collect all virtio*.ko* and *fw_cfg*.ko* regardless of subdirectory, then
restore them into their original relative paths under kernel/.
Artifacts now: 42 MiB (vmlinuz 11 MiB + initramfs 31 MiB), gate passes.
* fix(build): keep failover modules in initramfs strip
virtio_net depends on net_failover/failover for live-migration support.
Stripping them left virtio_net with unresolved symbols
(net_failover_create/destroy), so the module failed to load and the
guest came up with only lo. init.sh then skipped every NIC ("no
interface found for MAC ..."), leaving lb-agent with no network path
to AWSGW and the LB stuck in provisioning.
Add *failover*.ko* to the keep-list. Image size unchanged at 42 MiB
(under the 50 MiB Phase 2 gate). ELBv2 e2e now reaches active and
2/2 targets healthy for both ALB and NLB internal LBs.
* fix(daemon): restore slog default after viperblock.New mutates it
viperblock.New unconditionally calls vb.SetDebug, which calls
slog.SetDefault with a TextHandler at LevelError — globally silencing
every slog.Info and slog.Warn in the caller process for the rest of
its life. Discovered while validating microvm Phase 2 (mulga-siv-68):
the daemon stopped emitting Info logs the moment the first customer
VM with volumes launched, hiding direct-boot timing,
LaunchSystemInstance completed, and CreateLoadBalancer completed
lines that we need for boot-time tuning.
Workaround in newViperblock: re-install an Info-level TextHandler on
os.Stderr after each viperblock.New call. Also drop the three explicit
vb.SetDebug(false) calls in prepareRootVolume / prepareEFIVolume /
prepareCloudInitVolume — they were no-ops (viperblock.New already
runs SetDebug internally) and each one re-triggered the global
mutation we are trying to undo.
Proper fix is in viperblock itself — tracked as mulga-siv-70: SetDebug
should not call slog.SetDefault. Until then, this restore call is the
shortest path to getting the daemon's observability back so we can
measure t1_to_t2_ms and tune Phase 2.
Preflight note: golangci-lint not available on this dev host, so the
project preflight target cannot run end-to-end. Verified with
go vet ./spinifex/handlers/ec2/instance/... (clean) and
go test ./spinifex/handlers/ec2/instance/... (pass).
* perf(microvm): hit Phase 2 boot/memory gates
t1→t2 hypervisor: 3224 ms → 264 ms (12×). 128 MiB guest now boots
cleanly without OOM, reverting the temporary 512 MiB bump.
Root causes:
1. build-microvm-image.sh staged the entire chroot into the cpio
without dropping /boot, embedding a duplicate vmlinuz, Alpine's
stock initramfs-virt, System.map, and a "boot → ." symlink loop
(~25 MiB). Decompression peak exceeded 128 MiB. Strip /boot after
the kernel is copied out, before the cpio. Initramfs drops from
31 MiB → 11 MiB (53 MiB → 28 MiB uncompressed); total artifact
42 MiB → 22 MiB.
2. vm/lifecycle.go burned 3 s of fixed sleep on every direct-boot
launch: 2 s nbdkit pre-exec wait (no nbdkit on direct-boot) and
1 s post-fork settle (QEMU binds QMP within ~10 ms when there is
no firmware, ROM, or block layer). Both extracted to
directBoot-aware helpers — nbdkitPreExecWait collapses to 0, and
qemuStartSettleWait to 50 ms.
3. KernelCmdline only carried `console=ttyS0 virtio_mmio.device=…`.
Added boot-time perf flags: quiet loglevel=3 (silence printk over
115200-baud isa-serial), mitigations=off (KVM guest on trusted
host, single-tenant LB workload), tsc=reliable, no_timer_check,
reboot=t, i8042.{nopnp,noaux,nokbd} (microvm has no PS/2).
4. init.sh dropped modprobe virtio_mmio (built-in:
CONFIG_VIRTIO_MMIO=y) and tightened polling: fw_cfg/iface waits go
from 10 × 200 ms (up to 2 s) to 5 × 20 ms (up to 100 ms).
Phase 2 gates:
- t1→t2 ≤ 300 ms ✅ 264 ms / 281 ms
- artifact ≤ 50 MiB ✅ 22 MiB (gate already in build script)
- ELBv2 e2e green ✅ 32/33 (pre-existing client-VM failure,
unrelated to microvm path)
* build(microvm): wire build into deploy + distro + release pipeline
Adds install-microvm Makefile target (with grouped-target staleness
detection on vmlinuz/initramfs.cpio.gz), wires it into dev-install.sh
and reset-dev-env.sh, makes 'make deploy' reinstall artifacts when
present, and makes 'make distro-amd64' stage build/microvm/* into the
release tarball staging dir. arm64 distro stays unchanged (no aarch64
microvm artifact yet — Phase 4).
Release workflow gains a setup-go step and a 'make build-microvm-image'
step before 'make distro-amd64' on the amd64 runner so the resulting
tarball includes the kernel + initramfs without a manual copy.
Precursor for the Phase 3 PC-machine LB removal (mulga-siv-69).
Closes mulga-siv-71.
* build(ansible): include microvm artifacts in build role tarball
Adds a build-microvm-image task to the ansible build role and stages
build/microvm/* into the role's release tarball so the install role's
setup.sh run picks them up via INSTALL_SPINIFEX_TARBALL. Skipped
gracefully when the build script is absent (older branches without
direct-boot LB wiring).
* feat(config): enable microvm direct-boot LB path by default
Uncomments the [nodes.<node>.daemon.microvm] section in the generated
spinifex.toml template and sets elbv2_enabled = true so all new
clusters bring up ELBv2 LBs via the direct-boot microvm path. Operators
can opt back to the legacy PC-machine path by flipping the flag to
false in the rendered config.
Required for end-to-end CI on this branch to exercise the direct-boot
path. Existing clusters' configs are unchanged (the template only
affects fresh 'spx admin init' renders).
* fix(microvm): bootstrap apk.static when no host rootfs tool exists
Self-hosted CI runners and the GitHub-hosted ubuntu-24.04 image often
have none of apk, docker, or podman installed. apk-tools is not in the
Debian 13 (trixie) repositories. Without one of these the rootfs build
fails up front with 'no rootfs build tool available'.
When all three are absent, fetch apk-tools-static from the configured
Alpine mirror, extract it to a tempdir, and prepend it to PATH so the
existing native-apk strategy below picks it up transparently. Requires
only curl + tar, both of which are present on every CI runner that can
already check out source.
No-op when apk, docker, or podman is already present.
Unblocks https://github.com/mulgadc/spinifex/actions/runs/25988830244
* revert: drop apk.static bootstrap in build-microvm-image
Reverts 0bd76b7. Self-hosted runners will get docker.io installed
out of band; existing Strategy 2 (docker run alpine:3.20) handles
the rootfs build without host sudo or unsigned package install.
* docs(workbook): drop lb-alpine import for microvm direct-boot LB
LBs now launch via direct-boot QEMU microvm using kernel + initramfs
bundled at /usr/share/spinifex/microvm/, so the legacy lb-alpine system
AMI import is no longer required.
* fix(daemon): own tap devices by daemon user so QEMU can attach without CAP_NET_ADMIN
When the daemon runs non-root (production: User=spinifex-daemon), child
QEMU processes inherit that uid but lack CAP_NET_ADMIN. The kernel's tun
attach check then requires the tap owner uid to match the caller's euid.
Without the `user` flag, `ip tuntap add` defaults to root:root and qemu's
TUNSETIFF fails with EPERM ("could not configure /dev/net/tun: Operation
not permitted").
Surfaced by the e2e-nightly cell-17 microvm LB launch on the ci-pseudo
runner where the kernel enforces strictly; legacy EC2 launches on
ci-single runners happened to attach successfully despite the same code
path. Adding `user $current group $gid` to `ip tuntap add` ensures the
tap is owned by whatever uid the daemon (and its qemu children) run as.
Root daemons skip the flag — they have CAP_NET_ADMIN ambient.
* fix(e2e): redirect lb probe chatter to stderr so stalls are visible
test_http_from / test_tcp_from echoed progress to stdout, which the
callers captured into *_OK vars via $(...). Result: 6+ minute retry
loops ran silently in CI, and the "$ok" comparison never matched
"true" because the captured value contained the full multi-line
chatter. Reachability pass/fail counters were also lost in the
subshell.
Redirect helper output to stderr, leave only the true/false flag on
stdout, and move pass/fail to the caller so they actually count.
* fix(microvm): don't /32 AdvertiseIP via mgmt for internet-facing single-node
buildMicrovmNICs overrode resolveMgmtRoute's deliberate empty return
for the single-node internet-facing case by falling back to
(MgmtBridgeIP, AdvertiseIP). That installed a /32 route to AdvertiseIP
via the mgmt NIC inside the LB microvm. On single-node where the
AWSGW host IP equals the WAN client IP, the /32 also catches reply
traffic for inbound HTTP/TCP to the LB's floating IP — replies leave
via the mgmt NIC with src=data-NIC IP, the host kernel drops the
asymmetric flow, and same-chassis ingress hangs.
resolveMgmtRoute already encodes the correct policy:
- multi-node any scheme → explicit MgmtRoute{Gateway,Target}
- single-node internal → fallback to (MgmtBridgeIP, AdvertiseIP)
- single-node internet-facing → empty (reach AWSGW via VPC SNAT)
Honor it. Matches the legacy lbVMUserData path, whose own comment
flagged the stolen-WAN-return-path symptom this introduced.
Test covers all three branches.
* feat(ansible): dev-deploy playbook for in-place artifact swap
Fills the gap between ansible-dev-install (skips when already installed)
and ansible-dev-reset (full teardown + reinstall + smoketest). Mirrors
Makefile `deploy` target: rebuild + replace binaries and microvm
artifacts on a running node, restart spinifex.target, wait for awsgw.
Skips setup.sh (no user/dir/systemd-unit changes) and smoketest so
iteration is fast. Use ansible-dev-reset when changing systemd units,
helper scripts, logrotate, or setup.sh itself.
Adds:
- roles/deploy/tasks/main.yml — install spx + nbdkit plugin + microvm
artifacts, with plugindir auto-detection via `nbdkit --dump-config`.
- playbooks/dev-deploy.yml — chains build + deploy roles.
- Makefile ansible-dev-deploy target.
- README playbook table + "when to use which" guidance.
* chore(microvm): remove legacy LB Alpine image build pipeline
Phase 3 microvm removal — strip the PC-machine LB image build
artifacts that direct-boot no longer needs. The microvm initramfs
already carries lb-agent + HAProxy via build-microvm-image, so the
lb.conf manifest, lb-setup.sh chroot script, build-lb-image target,
dev-install / reset-dev-env import steps, and ansible LB-image tasks
all become dead.
build-system-image stays — other manifests (e.g. GPU images) still
use it.
* refactor(microvm): remove legacy PC-machine LB boot path
Phase 3 — direct-boot becomes the only ELBv2 LB launch path.
- Drop SystemInstanceInput.DirectBoot / ImageID / UserData (every LB
caller set DirectBoot=true; legacy cloud-init userdata is gone).
- Drop ELBv2ServiceImpl.lbVMUserData, systemAMI* fields, SetSystemAMIFunc,
getSystemAMI, and the lazy-AMI wiring in daemon.startCluster.
- Collapse CreateLoadBalancer to a single direct-boot launch input.
- Collapse daemon.LaunchSystemInstance: drop AMI validation, ImageID
on RunInstancesInput, UserData base64 encode, GenerateVolumes branch.
buildDirectBootConfig hardcodes /usr/share/spinifex/microvm and
isa-serial=on (microvmMachineType no longer takes a flag).
- Drop MicrovmConfig from config.DaemonConfig and the
[daemon.microvm] section from the spinifex.toml template.
- Prune dead tests (lbVMUserData_*, PCMachine_Unchanged, AMI resolver
paths) and refresh stale comments that still mentioned lbVMUserData.
ARM hosts have no LB launch path until Phase 4 adds direct-boot on
virt — CreateLoadBalancer on aarch64 fails naturally at QEMU exec.
* docs: drop lb-alpine catalog entry from cluster setup guide
LB system instances no longer use an AMI — direct-boot microvm
artifacts ship in the spinifex package.
* feat(ui): remove LB image import banner + LB-AMI gating
Direct-boot microvm artifacts ship in the spinifex package, so the
LB system AMI no longer exists — the "Load balancer image not imported"
banner and the Create-button disable on the LB list / wizard pages
can never fire. Strip:
- lb-image-missing-banner.tsx component
- hasLbImage / isLbImage / LB_IMAGE_NAME / LB_MANAGED_BY_VALUE from
system-managed.ts (isSystemManagedImage stays — still used by the
EC2 Images pages to hide system AMIs)
- Banner gating + ec2ImagesQueryOptions imports from the LB list and
wizard pages
- The corresponding tests that asserted the banner appears
* revert: restore lb.conf + lb-setup.sh for mulga install pipeline
Phase 3 microvm removal (commit 6313d74) deleted these too early — the
mulga install/iso artifact builders (scripts/tofu-cluster/build-install
-artifacts.sh, scripts/tofu-iso/build-iso-artifacts.sh) still invoke
scripts/build-system-image.sh scripts/images/lb.conf, breaking e2e with
"ERROR: Manifest not found: scripts/images/lb.conf".
Restore both files verbatim so the legacy pipeline keeps building until
the mulga-side migration to microvm-only artifacts lands post-merge.
GIT_BRANCH was hardcoded to dev, so workflow_dispatch runs ignored the
ref chosen in the UI. Use github.ref_name for dispatch (and any non-cron
trigger), keep dev as the explicit target for scheduled cron runs.
Add a step before the E2E run that ensures the Ubuntu 24.04 noble cloud
image is cached at BM_ISO_CACHE. Downloads from ubuntu.com if missing,
prints cached size if present. Passes path via BM_UBUNTU_IMAGE to
bm-bootstrap.sh which SCPs it to the node for --file import.
* test(ddil): flip Scenarios A/B/C to real assertions
Replaces the t.Skip stubs landed in #204 with the assertions described in
docs/development/improvements/ddil-e2e-test-harness.md §3:
- A NATSKill — KillNATS on node3, assert ModeStandalone within 30s,
/local/instances still serves on the isolated node, majority /health
on node1+node2 stays up, witness counters on all three nodes keep
advancing, snapshot survives reconnect.
- B DaemonRestartWithoutNATS — KillNATS + RestartDaemonOnly, assert
ModeStandalone within 30s of restart, recovered instances present
with live QEMU PIDs, cluster rejoin after StartNATS. Strict pre/post
PID equality dropped — see file comment; recovery + a non-zero PID
give the same regression coverage without coupling to the daemon
unit's KillMode.
- C CleanPartition — PartitionNode peer-IP DROP, majority daemons keep
serving /health and /local/instances, isolated node3 reports
ModeStandalone with /local/* responsive, witness counter on the
partitioned side keeps advancing, heal converges and snapshot is
preserved.
Supporting changes:
- harness/daemon_client.go — daemonPort 8443→4432; 8443 is predastore,
the deployed daemon ClusterManager binds [nodes.<id>.daemon].host.
The Phase-1 stub used a placeholder that would have blocked any
/local/* assertion against the real cluster.
- harness/witness.go — export WitnessVM.Terminate so scenarios can
clean up their counter VMs from t.Cleanup.
- scenarios/main_test.go — requireLiveCluster + launchWitnesses
helpers to keep the three flipped scenarios tight.
- TEST_COVERAGE.md — A/B/C status flipped SKIPPED → ENABLED;
TestCoverageDrift continues to enforce alignment with the package.
Validation: built with -tags=e2e, dry-run scenarios pass, coverage
drift passes, preflight clean. workflow_dispatch e2e-ddil.yml against
tofu cluster is the next step.
* fix(ddil): countDropRules — single iptables -S call + filter
Phase 1's countDropRules ran `iptables -S INPUT -S OUTPUT` to grep DROPs
across both chains, but iptables -S takes a single optional chain — the
second -S errors to stderr, the combined SSH buffer poisons the grep
input, and Atoi fails ("ip" is what we saw on tofu-cluster). Hit by
TestHarnessSmoke and every flipped scenario (A/B/C) via AssertCleanState.
Switch to one `iptables -S` (lists every chain in iptables-save format),
filter for INPUT/OUTPUT lines, count `-j DROP`. `2>/dev/null` silences
sudo/iptables stderr so a noisy MOTD or warning cannot leak into stdin.
Error path now also surfaces the raw SSH output for the next time this
breaks somewhere unexpected.
* ci(e2e-ddil): export spinifex AWS creds for witness SDK
The witness EC2 client (harness/witness.go NewWitness) calls
session.NewSession with no static credentials, so the AWS SDK falls
through its default chain — env vars → shared profile → IAM role —
and on the CI runner none of those exist. Result on the live cluster:
"NoCredentialProviders: no valid providers in chain. Deprecated."
launches every Scenario A/B/C attempt straight to t.Fatal at
launchWitnesses.
spx admin init writes [spinifex] aws_access_key_id /
aws_secret_access_key to the operator's ~/.aws/credentials on node1
during bootstrap. Pull them over SSH and export as
AWS_ACCESS_KEY_ID / AWS_SECRET_ACCESS_KEY so the SDK's env-var step
resolves before it gets to the empty profile/IAM checks. Hard-fail
the step if either field is missing — better than silently watching
every scenario t.Fatal on the same line.
* fix(ddil): CI green-up — instance-type discovery, gotestsum, EC2 envelope
Three fixes to take the DDIL E2E suite from "scenarios flipped" to actually
green on the tofu cluster. mulga-siv-56.
1. Witness auto-discovers the smallest registered instance type
(DescribeInstanceTypes, sort by memory then vCPUs). The hard-coded
t2.micro default returned InvalidInstanceType on every Scenario A/B/C
launch because the cluster doesn't register that type. DDIL_WITNESS_-
INSTANCE_TYPE stays as an operator override.
2. e2e-ddil.yml uses gotestsum so the Actions UI shows per-test PASS/FAIL/
SKIP lines instead of a JSON wall. results.json artifact preserved for
future flake-rate dashboarding.
3. GenerateEC2ErrorResponse emits the real EC2 query-API envelope
<Response><Errors><Error>... instead of the IAM-shaped <ErrorResponse>.
aws-sdk-go v1's ec2query handler rejects the latter with
SerializationError and drops the code, leaving Go callers without an
awserr.Code() to inspect. New SDK round-trip test in gateway_test.go
guards the regression.
* ci(e2e-ddil): install gotestsum from prebuilt tarball
`go install gotest.tools/gotestsum@v1.12.0` failed on the self-hosted
runner because v1.12.0 pulls golang.org/x/tools v0.19.0, whose
tokeninternal static-assert pegs a narrow Go window (~1.22). Both older
and newer runner Go versions trip `invalid array length -delta * delta`.
A prebuilt linux_amd64 binary sidesteps toolchain coupling entirely
without changing the gotestsum version pin.
* ci(e2e-ddil): collect cluster logs on failure
Witness `findHost` is currently failing with "could not locate QEMU host
for i-XXX across 3 nodes" — daemon reports running but no QEMU fork is
visible on any node. Cluster gets destroyed during teardown, so logs
have to be pulled before that runs.
Adds a failure-only step that ssh's each node and bundles
journalctl spinifex-*, process listings, and state dirs into the
ddil-results artifact for offline triage.
* fix(ddil): support tap-mode QEMU networking in witness harness
findHost no longer extracts hostfwd port — production launches go through
auto-allocated ENI on the OVS bridge and emit `-netdev tap,...`, never
hostfwd. Witness was timing out across all 3 nodes.
Discover guest IP via DescribeInstances.PrivateIpAddress (populated by
PrepareRunInstances on ENI auto-create) and tunnel SSH through the host
node to guestIP:22. Host routes to the tap bridge subnet, so the relay
works without runner-side bridge routing.
WitnessVM.SSHPort → WitnessVM.GuestIP. hostfwdPortRE removed.
Closes mulga-siv-57.
* fix(ddil): SSH witness via public IP, drop unreachable tunnel path
tofu-cluster bootstraps with --external-mode=pool which forces
dev_networking=false → no QEMU hostfwd dev NIC and no host route to the
ENI's PrivateIpAddress (tap on OVS br-int, 172.31.0.0/16 invisible to
host kernel). Previous tunnel-via-host fix could find the host but
couldn't dial the guest.
Switch to the path shell e2e already uses: default subnet has
MapPublicIpOnLaunch=true, daemon auto-allocates an EIP from the external
pool, and the runner reaches that IP via the same WAN subnet as the
cluster nodes. No host relay required, survives Scenario C (partition
only DROPs peer cluster IPs, not the runner's source IP).
Workflow now scp's ~/.ssh/spinifex-key from the primary node (the
counterpart to the public material bootstrap-install.sh imports) and
exports DDIL_GUEST_SSH_KEY so the harness can auth as ubuntu against
cloud-init's authorized_keys.
WitnessVM.GuestIP → WitnessVM.PublicIP. hostSigner / dialHost removed.
Continues mulga-siv-57.
* fix(ddil): tunnel guest SSH through host node
EIP from MapPublicIpOnLaunch sits on the cluster's external pool subnet,
which is OVN-routed — reachable from any cluster node, not from the
off-cluster runner sitting on the DDIL_NODES WAN subnet.
Restore the host-jump pattern: SSH the hosting node (already known from
findHost), dial publicIP:22 over that connection, run a guest SSH
handshake over the tunnel. Symmetric with how shell e2e reaches guests
from inside a node.
Continues mulga-siv-57.
* fix(ddil): wait for witness sshd before baseline read
Previous run reached the guest EIP via the host tunnel but hit
'Connection refused' — sshd hadn't bound yet. waitForRunning only
checks EC2 state, which flips on QEMU start, not cloud-init completion.
The OVN dnat_and_snat rule for the auto-allocated EIP is also written
asynchronously, so the tunnel can land before either layer is ready.
awaitGuestSSH polls the host-tunnelled SSH handshake to publicIP:22 for
up to 90s, retrying on transient transport errors (refused/reset/EOF/
timeout/no-route) and failing fast on auth errors so a bad key surfaces
immediately. Called once after resolvePublicIP, before the baseline
counter read.
Continues mulga-siv-57.
* fix(ddil): case-insensitive transient SSH error match
awaitGuestSSH's retry matcher used lowercase substrings, but x/crypto/ssh
emits "ssh: rejected: connect failed (Connection refused)" with capital
C — strings.Contains returned false and the helper bailed on first
attempt instead of polling. Last run failed in 49s, not the 90s budget.
Lowercase the error before matching, and add "connect failed" as the
canonical signal for "jump host dial through tunnel failed".
Continues mulga-siv-57.
* fix(ddil): default guest SSH user to ec2-user
Shell E2E SSHes the same ami-ubuntu-* images as ec2-user
(tests/e2e/run-multinode-e2e.sh:650). DDIL harness defaulted to ubuntu
and hit 'unable to authenticate, attempted methods [none publickey]' —
authorized_keys is provisioned under the AMI default account, which is
ec2-user, not ubuntu.
Continues mulga-siv-57.
* fix(ddil): wait for witness-counter.service to seed /var/lib/counter
awaitGuestSSH passed at sshd-up, but cloud-init's runcmd that enables
witness-counter.service runs in the final cloud-init stage — after sshd
binds. Baseline read landed in the window where sshd accepts but
ExecStartPre hasn't created /var/lib/counter:
cat: /var/lib/counter: No such file or directory
Collapse awaitGuestSSH + readCounter into awaitBaseline that polls the
full path (tunnel + SSH handshake + cat) and retries on the transport
errors plus "no such file or directory". Single 2-minute budget covers
cloud-init final stage on tofu-cluster hardware.
Continues mulga-siv-57.
* fix(systemd): drop Wants=spinifex-nats from daemon unit
Wants= reactivates a stopped unit on `systemctl restart`, so a deliberately
killed spinifex-nats was getting pulled back up the moment the daemon
restarted — masking the DDIL Tier 1 standalone-startup path and breaking
the Scenario B assertion (mulga-siv-58). Cold-boot coverage stays intact:
spinifex.target's Wants= activates every spinifex unit on boot. After=
remains for ordering and is non-blocking when NATS is absent.
scripts/test-ddil-phase1.sh hit the same trap and worked around it with a
runtime drop-in plus sentinel file; the fix here makes that workaround
unnecessary for any caller that restarts the daemon while NATS is stopped.
* feat(daemon): peer-health probe drives standalone mode on partition
Mode() is now derived from two atomic signals — natsConnected (NATS client
TCP link, flipped by the existing disconnect/reconnect callbacks) and
peersReachable (any peer daemon's /health responded in the most recent
probe cycle). Reports cluster iff both are up; standalone otherwise.
The peer-health probe is the missing signal for DDIL Scenario C: an iptables
DROP between peer IPs blocks NATS cluster-routing traffic but leaves each
node's local NATS client TCP connection healthy, so nats.Conn.IsConnected()
keeps returning true and onNATSDisconnect never fires. The probe dials each
peer's /health over the cluster network with a 2s timeout on a 2s ticker;
worst-case detection of total partition is ~6s on a 3-node cluster, well
inside the 30s Scenario C budget. Single-node clusters keep peersReachable
permanently true (nothing to probe) so the derived mode flips to cluster as
soon as the local NATS connect succeeds.
The probe runs from startLocal so the partition signal exists even before
(or in the absence of) a successful NATS connect. It does not touch NATS or
JetStream, so the §1e Tier 1 invariant asserted by
assertNoClusterServicesInitialised is unaffected.
Tests:
- TestMode_RequiresBothSignals — every nats×peers combination.
- TestProbePeersOnce_FlipsOnHealthChange — deterministic probe-only test.
- TestProbePeerHealth_RejectsBadAddr — fails closed on missing addresses.
- TestMonitorPeerReachability_EndToEnd — ticker-driven false→true.
Closes mulga-siv-58.
* fix(daemon): peer probe falls back to local daemon port
`spx admin init` only renders `[nodes.<self>.daemon]` in spinifex.toml;
remote-node blocks carry just `host = "<ip>"` with no daemon sub-table.
So `peer.Daemon.Host` was always empty in a deployed cluster and the
probe failed closed, leaving peersReachable permanently false.
Tofu-cluster run 25665158964 surfaced this as a Scenario A regression:
after StartNATS, natsConnected flipped true on reconnect but Mode()
stayed standalone because the derived signal required peersReachable.
`a_nats_kill_test.go:75: node3 did not return to cluster mode … (still
reporting another mode)`.
Add peerDaemonPort(p) that prefers an explicit peer Daemon.Host port
when present and otherwise reuses the local daemon's port (clusters are
symmetric — every node binds the same port the template renders). New
TestPeerDaemonPort_FallbackToSelf covers both branches plus the no-port-
available case; TestProbePeerHealth_RejectsBadAddr is updated to clear
self config so it still asserts the fail-closed path.
* fix(daemon): SIGTERM preserves VMs + KillMode=process on the unit
DDIL Scenario B asserts that `systemctl restart spinifex-daemon`
preserves every guest VM so the new daemon can reattach via the
persisted local state file. The previous setupShutdown SIGTERM handler
called vmMgr.StopAll(), gracefully QMP-powering-down every guest before
the daemon exited — ~90s wall-clock and zero surviving QEMU on the
other side. CI run 25666369604 surfaced this as
`recovered instance i-... has no live QEMU PID`.
Two changes restore the Tier 1 contract:
- setupShutdown no longer calls StopAll. It still flips d.shuttingDown
so crash/restart handlers bail out, persists state, unsubscribes from
NATS, and exits. VMs are only stopped when coordinated cluster
shutdown drains them — handleShutdownDrain still calls StopAll and
flips the flag before the SIGTERM path runs. Operator-visible
behaviour change: `systemctl stop spinifex-daemon` leaves guest VMs
running. To stop VMs, use the cluster-shutdown topics or terminate
via the AWS API.
- The systemd unit gains `KillMode=process` so systemd only signals the
daemon's main PID. With the default control-group mode, QEMU
children were killed when systemd tore down the daemon's cgroup —
defeating the SIGTERM change above. `TimeoutStopSec=15` bounds the
new fast-exit grace window.
Also nil-guards natsConn.Close in the shutdown path: when a daemon
restarts while NATS is unreachable (Scenario B), natsConn is nil and
the close would panic.
Mulga-siv-58 (reopened).
* fix(vm): QEMU stdout/stderr to shared log file (SIGPIPE survives daemon restart)
QEMU stdout/stderr were piped to daemon-side scanner goroutines.
When the daemon exits (e.g. `systemctl restart spinifex-daemon`),
the pipe read ends close; QEMU's next write triggers SIGPIPE and
the guest dies — defeating DDIL Scenario B's "daemon restart
preserves running instances" guarantee.
Open `<runtimeDir>/qemu.log` and assign it to cmd.Stdout/cmd.Stderr
instead. The FD is dup'd into QEMU at fork, so closing it on the
daemon side after Start() leaves QEMU writing into the file
indefinitely. POSIX O_APPEND makes concurrent QEMU writes
interleave atomically per line, so a single shared log is safe and
avoids per-instance clutter in RuntimeDir.
Trade-off: QEMU lines no longer land in journalctl -u
spinifex-daemon. Operators inspect <runtimeDir>/qemu.log directly
(path logged at instance start under the qemu_log field).
mulga-siv-58 (DDIL Scenario B iteration 4)
* fix(daemon): pin XDG_RUNTIME_DIR=/run/spinifex; revert SIGPIPE workaround
Root cause of Scenario B's "no live QEMU PID" was not SIGPIPE — QEMU
ignores SIGPIPE (SIG_IGN set early in QEMU init). It was systemd's
`PrivateTmp=yes` on the daemon unit combined with `utils.pidPath()`
falling through to `os.TempDir()` (=/tmp):
- spinifex-daemon HOME=/var/lib/spinifex/spinifex, so
`$HOME/spinifex` (=/var/lib/spinifex/spinifex/spinifex) does not
exist and pidPath() returns /tmp.
- Every daemon start gets a fresh private /tmp namespace. QEMU stays
in the OLD namespace after the daemon dies (mount namespaces aren't
changed by reparenting). The new daemon's /tmp is empty.
- `/local/instances` reads `<pidPath>/<id>.pid`; in the new namespace
the file doesn't exist, so PID=0.
Fix: set `Environment=XDG_RUNTIME_DIR=/run/spinifex` on the daemon
unit. /run/spinifex is host-wide tmpfs (declared via tmpfiles.d,
already in ReadWritePaths) and survives daemon restart. pidPath()
short-circuits on XDG_RUNTIME_DIR, so QEMU pidfiles, QMP sockets, and
RuntimeDir() all resolve to the stable path. Both daemon incarnations
and QEMU children see the same files.
Revert iteration 4's pipe→file QEMU log change (commit 8a9a6f9f).
SIGPIPE was never killing QEMU, and the file-redirect dropped QEMU
lines from `journalctl -u spinifex-daemon` for no gain.
mulga-siv-58 (DDIL Scenario B iteration 5)
* feat(daemon): siv-60 heal reconcile — phase 1 (probe-heal trigger) (#211)
* feat(daemon): wire reconcileOnHeal on peer-probe heal edge (siv-60 phase 1)
Scenario C heal triggered zero resync: the local NATS client stayed
connected to its loopback server throughout the partition, so
onNATSReconnect never fired. The peer-probe false→true transition was
the only heal signal but had no resync action wired to it.
Adds reconcileOnHeal, called from both edges and coalesced via a
reconciling atomic.Bool so the two callbacks landing on the same heal
don't double-push. For phase 1 the body is the existing WriteState
(re-asserts our per-node row in the instance-state KV). Phase 2 will
extend it to pull KV → merge → push for the stopped/terminated buckets
and re-fire per-node bootstrap.
Plan: docs/development/feature/ddil-heal-reconcile.md
* feat(daemon): siv-60 phase 2 — idempotent default-VPC bootstrap re-fire on heal
Calls ensureDefaultVPCInfrastructure() from reconcileOnHeal after the
WriteState push. Idempotent: each branch (default VPC lookup, IGW
attach, default-SG create, default route insert) checks for existing
infrastructure before creating. Covers the failure mode where
startCluster ran during partition and the initial creates returned
errors against an unreachable NATS — without a heal-time retry the
cluster would be stuck without a default VPC until the next daemon
restart.
Scope note: the bead's "pull KV → merge → push" assumed the daemon
cached peer-node running state, stopped instances, terminated
instances, and VPC/IGW/SG state locally. The codebase audit (see plan
doc) confirms it doesn't — every consumer reads its KV bucket fresh
per request, and vmMgr only tracks VMs running on this node. The
bootstrap re-fire is the one heal-time action that has a real
in-memory target. Watchdog sweep is unnecessary because
vm.Manager.CrashHandler is event-driven from cmd.Wait().
* fix(daemon): drop ensureDefaultVPCInfrastructure from reconcileOnHeal (siv-60 follow-up) (#212)
* fix(daemon): drop ensureDefaultVPCInfrastructure from reconcileOnHeal
DDIL Scenario C regressed at the witness-SSH step after siv-60
landed in #211. Root cause: the first peer-probe tick on multi-node
startup flips peersReachable false→true (its zero value is false), so
reconcileOnHeal fires concurrently with startCluster's own
ensureDefaultVPCInfrastructure call. The Describe→Create→Attach
sequence is not cluster-wide singleton, so multiple daemons + double
calls per daemon raced and produced duplicate IGW attachments,
corrupting default-VPC routing — which broke the witness VM's tunnel
SSH path once Scenario C's partition was installed.
Phase 1 (the heal trigger + coalescing) is the meaningful fix and
stays. Phase 2's bootstrap re-fire needs leader election or a
debounce against the startup-time path before being re-introduced;
leaving an inline NOTE so the next attempt has the context.
Failed run: actions/runs/25706585637 (Scenario C, attempts 1+2).
Last green DDIL run: 25671044714 (pre-merge, SHA 40e3d847).
* fix(daemon): init peersReachable=true to suppress startup heal edge
DDIL Scenario C kept flaking at attempt-1 even after dropping the
bootstrap re-fire. Remaining trigger: peersReachable starts as the
zero value (false) on multi-node clusters, and the first probePeersOnce
tick flips it false→true. That counts as a "heal" edge under siv-60
phase 1, so reconcileOnHeal fires at boot — concurrent with
startCluster's bootstrap — perturbing timing in a way that the
harness's Scenario C exposes (witness sshd handshake EOF mid-test).
Initialise peersReachable optimistically. Mode() also requires
natsConnected (starts false), so the optimistic peer init can never
falsely report cluster mode — but it does eliminate the spurious
startup edge. Real partition→heal transitions still fire the trigger
exactly as designed: true→false on partition, false→true on heal.
---------
Co-authored-by: Julian Sommer <115516918+juliansommer@users.noreply.github.com>
Separate from normal e2e. Checks out spinifex, checks out mulga scripts
(sparse: iso-builder + baremetal), builds spx + test tar via
bm-build-artifacts.sh, builds PXE artifacts (squashfs/initrd/vmlinuz)
via iso-builder with persistent cache on banksia, then runs
run-baremetal-e2e.sh against the single bare-metal node.
* feat: add GPU discovery package (mulga-992)
Adds spinifex/gpu package with sysfs-based GPU enumeration, IOMMU group
member lookup, and a PCI device ID model table. Vendor-specific enrichment
via nvidia-smi is attempted opportunistically and falls back to the built-in
table when unavailable. All discovery and IOMMU logic is covered by unit tests
using mock sysfs trees.
* feat: add VFIO bind/unbind and GPU pool manager (mulga-993)
Adds gpu.BindVFIO/UnbindVFIO using sysfs driver_override for per-device
driver switching, and gpu.Manager which owns the claim/release lifecycle
for the GPU pool including full IOMMU group binding, rollback on partial
failure, and marking entries unavailable when rebind fails after VM
termination.
* feat: add G5 instance type generator with GPU model support (mulga-994)
- Add GPUModel type, NVIDIAa10g constant, and GPUModelForVendorDevice lookup
- Add generateGPUTypes to emit g5.* types with GpuInfo populated
- Add IsGPUType helper for consumers filtering GPU-capable types
- Update DetectAndGenerate to accept gpuModels []GPUModel parameter
* feat: integrate GPU passthrough into daemon lifecycle (mulga-995)
- Add gpu_passthrough config flag; discover GPUs and build manager at startup
- Gate g5 instance types on GPU pool availability via canAllocateCount
- Claim GPU (VFIO bind) in LaunchInstance; inject vfio-pci QEMU device
- Release GPU (VFIO unbind, rebind to host driver) in stopInstance
- Re-claim GPU on daemon restart when QEMU process is still alive
- Add UseUEFI / OVMF support for x86_64 VMs (optional, falls back to SeaBIOS)
- Fix Claim to use stored OriginalDriver when device is already vfio-pci bound
* feat: add GPU fields to NodeStatus and spx top nodes (mulga-996)
- Add TotalGPUs/AllocGPUs to NodeStatusResponse (zero on non-GPU nodes)
- Populate from gpuManager in handleNodeStatus
- Show GPU (used/total) column in spx top nodes; "-" when no GPUs present
* feat: Ubuntu 24.04 GPU AMI build pipeline (mulga-997)
Extends build-system-image.sh to support Ubuntu alongside Alpine.
Key differences handled: partition table (parted resizepart p1),
bind mounts for DKMS (/proc /sys /dev), apt vs apk, systemctl vs
rc-update. DISTRO defaults to "alpine" for backward compatibility.
Adds ubuntu-gpu.conf manifest and ubuntu-gpu-setup.sh chroot script
that installs nvidia-headless-550-server with DKMS pre-built against
a pinned linux-image-generic kernel, blacklists nouveau, and prevents
unattended-upgrades from invalidating the pre-built module.
* Fixed GPU passthrough and added test script
* feat: always-probe GPU at startup, surface capability in NodeStatusResponse
- Add gpuProbeResult struct and probeGPU() which runs at daemon startup
regardless of gpu_passthrough config. Checks sysfs for GPUs, IOMMU
groups, and vfio_pci module presence.
- Store gpuProbe on Daemon struct; split NewDaemon into probe (always)
and activate (opt-in) phases.
- Populate GPUCapable, GPUPassthrough, GPUModels on NodeStatusResponse
so operators can see hardware state before enabling passthrough.
- Update 'spx top' GPU column: '-' = no hardware, '0/N*' = capable but
passthrough not active, 'used/total' = passthrough active.
* feat: SIGHUP hot-reload for GPU passthrough config (mulga-1001)
- Export GenerateGPUTypes for use by the reload path
- Add ResourceManager.reloadGPUTypes: mutates instanceTypes map in-place
(preserves references held by instanceService) and updates NATS
subscriptions without full daemon restart
- Separate SIGHUP from SIGTERM/SIGINT: setupReload() listens for SIGHUP
in a context-aware loop; setupShutdown no longer intercepts SIGHUP
- Add reloadConfig() + applyGPUConfig(): re-reads spinifex.toml on signal,
handles false→true (re-probe + activate) and true→false (refuse if
instances running, otherwise deactivate) transitions
* feat: spx admin gpu status/enable/disable commands (mulga-1000)
- admin.SetGPUPassthrough: Go implementation of the idempotent TOML write
(replaces the inline Python heredoc in spx-test-gpu.sh)
- spx admin gpu status: shows GPU hardware, IOMMU/vfio state, passthrough
activation, and advertised g5 instance types via NATS NodeStatusResponse
- spx admin gpu enable: checks prerequisites, writes TOML, sends SIGHUP,
polls until daemon confirms GPUPassthrough=true
- spx admin gpu disable: refuses while GPU instances are running, otherwise
writes TOML, sends SIGHUP, polls until confirmed
- spx-test-gpu.sh: replace Python TOML heredoc with spx admin gpu enable
* fixed admin
* fix: filter Intel iGPU from passthrough pool, use lspci for consumer GPU names
Discover() now skips non-NVIDIA/AMD vendors so Intel iGPUs never enter
the passthrough pool. enrichFromLspci() uses the system PCI ID database
via lspci -vmm to populate the model name for any card not in the
hardcoded table, without needing nvidia-smi or driver tools.
* fix: grant CAP_SYS_ADMIN and vfio device access to spinifex-daemon
GPU passthrough requires writing to /sys/bus/pci/drivers/vfio-pci/unbind
on instance stop. The kernel gates this on CAP_SYS_ADMIN regardless of
file permissions. QEMU subprocesses also need char-vfio rw access to
open /dev/vfio/N for the passed-through device.
* fixing gpu bining permissions
* working state of gpu passthrough on phyiscal box
* installer grub image fixes
* made gpu-passthrough more user facing
* fixed banner
* fixed banner
* banner fix
* gpu passthrough docs
* preflight tweak
* vpcd fixes to set br-wan to promisc for public IP DHCP processes
* fixed vpcd br-wan promisc and veth pair
* ssh keygen fix
* fixes after running /review-branch
* feat: re-wire GPU claim and device injection after vm.Manager refactor
GPU passthrough claim (VFIO bind) and QEMU device injection were lost
when dev's vm.Manager refactor (#185/#186) moved StartInstance/
CreateQMPClient into vm/lifecycle.go. Re-add both in their correct
new homes:
- daemon_handlers_instance.go: claim GPU before vmMgr.Run() in both
RunInstances and StartStoppedInstance handlers; release on failure
- vm/lifecycle.go startQEMU(): inject vfio-pci device with x-vga flag
derived from instance.GPUXVGAEnabled when GPUPCIAddress is set
* fix: Create spinifex user ~/.ssh and keys in firstboot
---------
Co-authored-by: Ben Duncan <5178243+benduncan@users.noreply.github.com>
Co-authored-by: Julian Sommer <115516918+juliansommer@users.noreply.github.com>
Scheduled runs were using github.ref_name, which equals the default branch
(main) — so the nightly was testing main. Hardcode GIT_BRANCH=dev so the
build-install-artifacts.sh + tofu provisioning target dev's HEAD instead.
GitHub always loads scheduled-workflow files from the default branch, so
this change must stay in sync on main for the schedule to use it.
- workflows: add 'dev' to push/PR triggers (spinifex.yml, ui.yml, e2e.yml)
- workflows: drop "Resolve Mulga Branch" fallback step; mulga is single-branch
so checkout@v6 uses the default branch implicitly
- dependabot: route gomod/github-actions/npm PRs to dev
- diff-coverage.sh: pick origin/dev as base for feat branches, origin/main for dev
- iac/proxmox-template: default git_branch to dev for cluster builds
Refs docs/development/improvements/reintroduce-dev-branch.md
* preflight tweak
* fix: pin gateway LRP to link-local, end intra-cluster ARP collision
Every VPC's IGW gateway-LRP claimed pool.GatewayIP || pool.RangeStart on
attach. Multi-VPC clusters all GARP'd the same .160 with three different
deterministic MACs on the shared br-ext localnet, flapping the upstream
ARP cache and dropping 100% of inbound traffic to dnat_and_snat external
IPs (mulga-siv-26).
handleIGWAttach and reconcileIGW now unconditionally set the gateway
router port to 169.254.0.1/30. The default route's OutputPort already
pins the LRP, so the WAN nexthop need not be on-subnet. Pool IPs stay
allocated only for per-VM dnat_and_snat external addresses, which are
unique by construction.
Self-heal: RetrofitAllGatewayPortNetworks runs at startup and rewrites
stale Networks in place via the new UpdateLogicalRouterPort path. Needed
because Reconcile gates IGW work on "ext switch missing", so a cluster
shipped with the buggy CIDR never re-enters reconcileIGW.
Regression guards: TestTopologyHandler_IGWAttach_MultiVPC_NoIPCollision
and TestReconcileIGW_RewritesStaleGatewayPortNetworks. Existing tests
updated to assert link-local and OutputPort=&gwPortName. Log field
gateway_ip renamed to lrp_network to signal the semantic shift.
* fix: rewrite utils.HashMAC to SHA-256 / 46-bit output
The old 24-bit rolling hash with literal class prefix had birthday-paradox
collision probability of 1% at ~580 ids and 50% at 4096 — well within the
range of a single deployment's resource population (LRPs, ENIs, dev/mgmt
NICs). On a shared L2 segment, two clusters could trivially produce
duplicate MACs, breaking neighbour discovery and DHCP.
Switch HashMAC to SHA-256 across the entire input, taking the low 6 bytes
and forcing the IEEE 802 reserved bits (bit0=0 unicast, bit1=1 LAA) on the
first octet. Output entropy goes from 24 bits to 46 bits — 1% collision
boundary moves from ~580 to ~1.2M ids.
Drop the redundant prefix arg: it was no longer the literal output prefix
under the new scheme, just folded into the hash input. Class disambiguation
moves to the caller, where it's explicit. Three of four callers had nothing
to disambiguate (eni-, subnet-, gw-vpc- ids are already unique); dev and
mgmt NICs share instance.ID and now compose "dev:" / "mgmt:" tags.
Also consolidate vpcd.generateMAC, which was a local duplicate of the
broken algorithm rather than a HashMAC wrapper, into a HashMAC delegation.
Plan: docs/development/bugs/vpcd-mac-collisions-shared-l2.md
Bead: mulga-siv-27
* fix: pin HashMAC first octet to 0x02
Previous impl forced only the IEEE 802 reserved bits (bit0=0 unicast,
bit1=1 LAA) on the first octet, leaving the upper 6 bits hash-derived.
Technically valid LAA unicast, but produced MACs like 4a:.. and fe:..
that visually encroach on vendor OUI space and tripped CI/ops checks
expecting all generated MACs to start with 02:.
Pin byte 0 to literal 0x02; hash bytes 1-5 from sha256[0:5]. Output
entropy drops from 46 to 40 bits — birthday-paradox 1% collision at
~150k ids, still 256x the old 24-bit bound (~580).
* chore(e2e): dump cross-chassis OVN state on guest SSH failure
Adds chassis registrations, port_binding claims, gateway_chassis rows,
ovs-vsctl topology, Geneve tunnel state, and br-int tunnel flows to
dump_guest_ssh_diagnostics so we can pinpoint where the cross-chassis
dataplane stalls (cr-gw chassis vs remote chassis with the VM bound).
* fix: gate vpcd startup reconcile behind NATS KV leader election
N vpcds in a multi-node cluster all hit Get-then-Create on Logical_Router
with no atomicity, producing duplicate rows that ovn-nbctl rejects with
"Multiple logical routers named '...'. Use a UUID."
Add AcquireReconcileLeader using NATS KV CAS (kv.Create on a single key
in spinifex-vpcd-reconcile bucket). Only the elected vpcd runs Reconcile,
ReconcileFromKV, and the two retrofit passes — others Subscribe and rely
on the vpcd-workers queue group for runtime events. MaxAge=60s on the
bucket caps recovery time when a leader crashes mid-reconcile.
Falls through (elected=true) when KV is unavailable so first-boot does
not deadlock on a missing JetStream.
mulga-siv-29
* fix(elbv2): force mgmt host route for internal-scheme LBs (mulga-siv-30)
Single-node CI e2e Phase 3b ALB internal hangs in 'provisioning' for 270s
because the lb-agent inside the ALB VM has no return path to AWSGW.
The gateway-URL decision tree in daemon.wireLBAgentConfig picks advertiseIP
for single-node and deliberately skips adding the /32 mgmt host route — the
WAN-return-path concern in the comment is real but applies only to
internet-facing LBs, which have an EIP and an OVN dnat_and_snat pair that
gives reply traffic a way home. Internal LBs have no EIP / no SNAT, so when
the agent dials advertiseIP the reply targets the VM's private subnet IP from
the host's WAN with no route back.
Make lbVMUserData scheme-aware. New helper resolveMgmtRoute returns the
existing (MgmtRouteGateway, MgmtRouteTarget) when set (multi-node case) and
falls back to (MgmtBridgeIP, AdvertiseIP) when scheme is internal — only
internal LBs need the /32 route, so internet-facing single-node still gets
no bootcmd and the host-initiated WAN path stays clean.
Daemon now exposes MgmtBridgeIP and AdvertiseIP unconditionally so the
fallback has the inputs it needs.
* fix(daemon): stub sudoCommand in TestSetupComputeNode_ValidatesArgs (mulga-siv-31)
The test was calling real SetupComputeNode("chassis-test", ...) which shelled
out via sudoCommand to set external_ids:system-id=chassis-test on the host's
live OVS. On a dev box with OVS installed this overwrote the persistent UUID
(owned by openvswitch-switch and re-applied only on reboot), so vpcd's
discoverChassis filtered out the legitimate SBDB chassis row as 'stale local'
and crashlooped — taking out all VPC ops including ALB ENI provisioning.
Bind sudoCommand to a var so tests can swap it. Stub it in the test to return
exec.Command("/bin/false") and assert SetupComputeNode returns an error. The
test's intent (signature + error-path coverage) is preserved; nothing on the
host is touched.
* chore(vpcd): log DHCP Acquire concurrency + duration (mulga-siv-32)
Diagnostics-only change to surface whether nightly e2e cell-3 / cell-8
DORA timeouts correlate with concurrent Acquire calls on the same
bridge. Tracks per-bridge in-flight count and wallclock duration of each
Acquire; logs WARN on failure with both fields, DEBUG on success.
No behavioural change.
* ci(e2e-nightly): dump cluster journals on failure (mulga-siv-32)
run-multinode-e2e.sh dumps node journals via its own EXIT trap, but
run-cert-e2e.sh / run-lb-e2e.sh / reboot-e2e do not. When those scripts
fail the cluster is destroyed in Teardown without surfacing any daemon
logs, blocking root-cause analysis.
Add a workflow step that runs after the test scripts but before
Teardown when a previous step failed, ssh'ing to each node and pulling
the last 200 lines of every spinifex-* unit. Best-effort: skips
gracefully when inventory or nodes are unreachable.
Diagnostic-only; no behavioural change to the test path.
* fix(setup): mask dhcpcd.service to stop it racing vpcd's DHCP client (mulga-siv-32)
Debian 13 (Trixie) auto-enables a standalone dhcpcd.service when
dhcpcd-base is installed. It binds br-wan and races vpcd's in-process
nclient4 client for upstream OFFERs, draining the lab DHCP pool with
duplicate leases and causing intermittent DORA timeouts in the e2e
public-IP path (worst on cell-8 real-multi/dhcp/debian-13).
The ISO installer already masks the unit at install time
(cmd/installer/install/install.go:316). The binary install path used by
e2e nightly missed it, so debian hosts installed via setup.sh ran with
both DHCP clients live. Mirror the ISO mask here.
Ubuntu hosts are unaffected (dhcpcd-base does not auto-enable
dhcpcd.service on Noble).
* ci(e2e-nightly): also dump dhcpcd.service state on failure (mulga-siv-32)
Confirms or rules out the dhcpcd-vs-vpcd race hypothesis. Pulls the
dhcpcd.service journal alongside the spinifex-* units, plus
systemctl is-enabled / is-active and the DHCP client port (UDP 68)
listener so we can see directly whether dhcpcd is running and bound
to br-wan when an Acquire times out.
---------
Co-authored-by: Ben Duncan <5178243+benduncan@users.noreply.github.com>
* feat: scaffold DDIL E2E harness (cluster, SSH, daemon client)
Phase 1 of the DDIL E2E test harness (mulga-siv-5.1). Adds the
tests/e2e/ddil/ package tree with the three harness primitives required
by every sibling scenario/fault bead:
- harness/cluster.go — Cluster, Node, ClusterFromEnv, NodeFromEnv
- harness/ssh.go — typed SSH transport backed by golang.org/x/crypto/ssh,
interface so dry-run and tests can stub it
- harness/daemon_client.go — thin HTTPS wrapper over /local/status,
/local/instances (placeholder types until daemon-local-autonomy lands),
plus /health for scaffolding validation
Also adds doc.go and README.md (run instructions + env-var contract). All
harness files carry //go:build e2e so default builds skip them.
Plan: docs/development/improvements/ddil-e2e-test-harness.md §0, §1.
* feat: add DDIL harness fault injection and link profiles
Phase 2 of the DDIL E2E test harness (mulga-siv-5.2). Adds the fault
injection and netem primitives consumed by Scenarios A–F:
- harness/fault.go — PartitionNode (per-peer iptables DROP with
orchestrator-SSH sanity check), HealNode, KillNATS, StartNATS,
RestartDaemonOnly, WaitForMode (polls /local/status for typed
DaemonMode enum)
- harness/netem.go — ApplyNetem (tc qdisc replace, idempotent),
ClearNetem (idempotent clear)
- harness/profiles.go — LinkProfile struct plus LAN, WAN, LTEDegraded,
SATCOM, HFData, Flapping constants (unvalidated approximations per
plan §2 table; validation tracking lives in TEST_COVERAGE.md)
All files carry //go:build e2e. Flapping profile is defined but
ApplyNetem rejects it — flap orchestration lands with the scenarios
that need it.
Plan: docs/development/improvements/ddil-e2e-test-harness.md §1, §2.
* feat: add DDIL harness witness VM helpers
LaunchWitnessVM launches a counter VM via the cluster's AWS gateway,
locates its QEMU host via ps, and captures a baseline counter reading.
ReadCounter/AssertProgressed tunnel SSH through the host's QEMU
hostfwd port to verify the workload progressed across a fault. README
documents the new DDIL_WITNESS_* and DDIL_GUEST_SSH_* env vars.
* feat: add DDIL harness snapshot and state assertions
TakeSnapshot / AssertPreserved compare /local/instances pre and post
fault, failing if IDs disappear or a running/pending instance regresses
to a terminal state. LocalStateRevision / AssertMonotonic read the
local state file revision from /local/status so scenarios can detect
the daemon rewinding its persisted state.
* feat: add DDIL harness reset, retry, and quarantine
ResetAllNodes brings every node back to a clean baseline (iptables -F,
tc netem clear on any interface carrying one, spinifex-nats and
spinifex-daemon started) then waits for cluster health — daemon /health
200 plus NATS routez peer count matching len(nodes)-1, mirroring the
shell suite's verify_nats_cluster predicate.
AssertCleanState is a pre-scenario baseline check that recovers a dirty
state via ResetAllNodes instead of failing outright, since a dirty
baseline usually means a previous scenario's cleanup was skipped.
Run wraps each scenario with quarantine handling (DDIL_QUARANTINED
skip) and a single reset-and-retry on failure. First-attempt failures
are not hidden; the retry is a diagnostic aid rather than a flake mask.
bd: mulga-siv-5.5
* feat: DDIL scenarios skeleton (6x t.Skip + TestMain + coverage drift)
Phase 1 of mulga-siv-5 (DDIL E2E harness): all six scenarios land as
TestScenario<L>_... stubs that t.Skipf on their hardening-epic dependency.
TestMain installs a SIGINT/SIGTERM trap that ResetAllNodes before
exiting; DDIL_DRY_RUN=1 short-circuits cluster setup and logs the planned
scenarios. TestCoverageDrift AST-parses sibling *_test.go files and
reconciles them against the DDIL table in TEST_COVERAGE.md so Phase 2/3
flips cannot silently diverge doc from code. TestHarnessSmoke covers the
AssertCleanState + ResetAllNodes round trip for the "full run on real
cluster" acceptance bullet.
* feat: add DDIL E2E CI workflow (workflow_dispatch only)
Phase 1 CI wiring for mulga-siv-5. Mirrors e2e_real_multi's
provision/bootstrap/teardown shape against the same ci-multi runner and
tofu-cluster, but runs the Go harness on the runner (outside the
cluster) so its SSH path survives the peer-traffic iptables rules that
Scenario C installs on a cluster node. Triggers are workflow_dispatch
only — nightly cron and on-main-merge come in mulga-siv-5.8 once ≥4
scenarios are asserting. results.json (go test -json) uploads as an
artifact so flake-rate visibility can be built on gh run view +
structured output, per the design doc.
joshsiv-mulga