Add a W13 durable MRF evidence runner that emits measured G07, G08, and P4 JSON artifacts and release descriptors through the existing scanner/heal bundle gate.
The runner now executes the ignored MRF replay evidence test with an exact full test path, validates raw artifact kinds and gate decisions, prepares Linux tmpfs-backed ENOSPC roots for G08, and documents the Linux/long-soak boundaries.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(sse): resolve bucket default encryption per request
PUT and the POST-object/extract path resolved a bucket's default
encryption with a hard-coded "no explicit SSE-C" flag, so the default was
layered onto a request that already carried an SSE-C header triple and
then tripped that request's own mutual-exclusion check. Every bucket with
default encryption refused SSE-C single PUTs with 400 InvalidArgument,
while CreateMultipartUpload on the same bucket succeeded because it
resolves SSE elsewhere. Both call sites now derive the flag from the
request headers, as COPY already did.
The bucket default's KMS key id was also inherited independently of the
effective algorithm, so an explicit AES256 request against an aws:kms
default bucket produced a self-contradictory algorithm/key-id pair and
was rejected. The key id is now inherited only when the effective
algorithm is aws:kms, matching the storage-layer resolver.
Refs backlog#2368 B1, B2.
* fix(sse): refuse SSE-KMS without a running KMS service
A write requesting aws:kms on a node with no KMS service fell back to the
node-local SSE-S3 provider: the data key was wrapped with
RUSTFS_SSE_S3_MASTER_KEY while the object metadata still recorded
aws:kms and the requested KMS key id. The stored object claimed a KMS
protection it never had, under a key that was never consulted, and no
signal distinguished it from a genuine SSE-KMS object.
The managed-encryption path now asks the resolved DEK provider whether it
wraps with a node-local master key and refuses SSE-KMS in that case:
InvalidRequest when KMS was never configured, ServiceUnavailable when a
configured service is not running. The check sits after the per-key
authorization gate so an unauthorized caller still receives AccessDenied
whatever the KMS runtime state is, and asks the provider rather than a
parallel availability signal because the provider is what actually wraps
the key. A missing master key no longer answers an SSE-KMS request with
an SSE-S3-worded configuration error.
The SSE-S3 local fallback is unchanged.
Refs backlog#2368 B4.
* fix(ecstore): restore and archive tiers in stored coordinates
Multipart restore addressed the remote tier in plaintext coordinates
while the copy-back reads the stored representation. Each part received a
misaligned slice of the remote object whose length still satisfied the
range, the hash reader and the completion size check, so the restore
reported success and silently replaced the object's bytes. Encrypted and
compressed multipart objects were both affected. Restore now accumulates
stored part sizes, passes the stored length to the hash reader alongside
the plaintext length, and validates against the stored size.
The copy-back digests stored bytes, so its computed MD5 is not the
object's public ETag. Restore now preserves the object ETag on both the
single-part and multipart paths, and gives each restored part its own
recorded part ETag rather than the object-level value.
Transition also handed the tier the object's SSE headers and its
RustFS-wrapped data key as request headers. Any S3 target rejected an
SSE-C archive outright, an SSE-KMS archive asked the target to encrypt a
second time under a key id it does not own, and the wrapped DEK left the
cluster. The archive request now strips every SSE header and encryption
marker with the predicate the replication path already uses; the local
xl.meta keeps all of it, so read-through and restore are unaffected.
Objects restored by an affected release are not detected or repaired
retroactively and must be re-restored from the tier.
Refs backlog#2368 B3, B5; backlog#2369 P7.1.
* fix(rio): lock the v1 nonce layout within a segment
Decrypting a v1 segment tried three historical nonce layouts per frame,
independently for every frame. The last of them exists for streams
written before 1.0.0-alpha.91, which reused a segment's part nonce for
every block in it; because block zero's derived nonce equals that base
nonce, a frame encrypted at index zero authenticated at any position. An
attacker able to rewrite the underlying shards could replay it and have
the forged plaintext returned with 200 and an unchanged length. Shard
integrity uses a keyed-hash-free checksum, which such an attacker can
recompute, so it is not a barrier.
A segment now locks onto whichever layout decoded its first non-zero-index
frame and rejects any later frame needing a different one. That leaves one
residual shape: a stream built purely from repeats of frame zero has no
later frame to disagree. New RUSTFS_ENCRYPTION_LEGACY_NONCE_FALLBACK
(default true, so pre-alpha.91 objects keep decrypting) drops the third
layout entirely when set to false, which closes it. Turning it off refuses
pre-alpha.91 objects, so migrate them first by rewriting in place.
Refs backlog#2369 P2.
* fix(kms): reload a service that failed to start
POST /rustfs/admin/v3/kms/reload short-circuited whenever the persisted
configuration matched the in-memory one byte for byte. A node whose KMS
failed to start keeps that configuration and sits in Error, so the
documented recovery call returned "reloaded successfully" while leaving
the node down. Peers reached the same path through the reload broadcast,
so a cluster that lost Vault during a rolling restart had no working
recovery route other than the node-local start endpoint. Reload now
short-circuits only for a service that is actually running, and otherwise
reconfigures, which starts a service that is not running.
The AWS backend also advertised key-version enumeration through
kms/status, which its own documentation says it cannot do; the capability
and its golden snapshot now say false.
Refs backlog#2369 P1, P7.3.
* docs: record the SSE and KMS changes for 1.0.0
The Unreleased changelog section carried no entry for any encryption work
merged since 1.0.0-rc.5, including three items with operational impact:
the config-secret variable whose absence persists secrets in cleartext
with only a warning, the v2 frame write switch and its rolling-upgrade
constraint, and per-key authorization making a public bucket incompatible
with SSE-KMS objects. Adds those plus this batch, including the SSE-KMS
refusal as a breaking change with both routes out.
Also corrects four places where documentation contradicted the code: the
cleanup register still called encrypted range seek opt-in after its
default flipped, the Helm README claimed vault_mount_path only applies to
Transit while the template also feeds the KV2 mount, the disaster-recovery
drill listed bundle contents for backends whose export is refused with
501, and the Chinese README capability table predated most of the feature
set. Documents the SSE-S3 local master key as a first-class operational
mode with its rotation dead end, and what the v1 frame layout does and
does not authenticate.
Refs backlog#2369 P5.
* fix(kms): classify data-path KMS failures by what the caller can do
Only "key not found" and a backend outage were classified; every other
KMS failure that reached the S3 data path fell through to
500 InternalError with a generic message. A disabled or pending-deletion
key, a denied KMS grant, an encryption-context mismatch, an unsupported
algorithm, a credential or timeout failure, and a capability the
configured backend does not have all looked identical to a server fault.
SDKs therefore applied exponential backoff to configuration errors no
retry can fix, and monitoring counted every one of them against the
server's own error rate.
Unusable-key and request-side failures now answer 400, a denied grant
403, transient backend failures 503, and a missing backend capability
501. Damaged, unreadable, or unknown-format key material keeps its 500:
it is a server-side integrity fault, and existing tests pin it.
The classifier is deliberately separate from the admin lifecycle
mapping, which answers 404 for a missing key because there a key id is
the resource being addressed; on the data path it arrives inside a
request header or a bucket default. Messages either name what the caller
asked for or stay generic, with deployment-side detail left on the error
source the way the storage-IO mapping already does.
Refs backlog#2368 B6.
* fix(kms): track and renew static Vault tokens
Token authentication hard-coded "this token carries no lease", so the
renewal task never started, the remaining-TTL gauge was never published,
and nothing looked wrong. `vault token create` grants a 768-hour TTL by
default, so a cluster that had been healthy for a month turned every KMS
call into a 403 and could not recover without a restart or a
reconfigure. Production configuration validation only rejects the
literal dev-token, so an ordinary expiring token reaches a whole cluster.
The source now reads `auth/token/lookup-self` at login and adopts what
Vault reports. A token with no expiry behaves exactly as before. An
expiring renewable one is picked up by the existing renewal loop and
renewed at half TTL like every other auth method. An expiring
non-renewable one warns with its remaining lifetime and publishes the
gauge, so the fail-closed window is visible before it arrives.
The probe never fails the login: a policy that omits lookup-self, or a
Vault that is briefly unreachable, warns and falls back to exactly the
previous behaviour rather than taking down a deployment that works
today. The scripted Vault test double answers the lookup out of band so
existing scripts keep describing only the protocol under test.
Refs backlog#2369 P3.
* feat(sse): report SSE-C requests that arrive without TLS
An SSE-C request carries the customer's AES key in a request header, so
AWS S3 and MinIO both refuse one that did not arrive over TLS. RustFS
accepted them on any transport: a plaintext hop hands the key to anyone
on the path, and since the object cannot be read without that same key,
the exposure lasts as long as the object does.
Refusing outright is the correct end state but not a safe default to
adopt inside a release window, because the project's own s3-tests and
e2e lanes and most staging deployments speak plain HTTP. This release
reports instead: each such request increments
rustfs_ssec_plaintext_requests_total and logs one warning per process, so
an operator can confirm nothing would break before the default flips.
RUSTFS_SSE_C_REQUIRE_TLS=true opts into the AWS 400 now.
The verdict is per connection rather than per deployment: the layer is
built with whether this listener terminated TLS, and additionally accepts
an https protocol forwarded by a proxy the trusted-proxy configuration
already vetted. It sits beside the rate limiter, after the layer that
makes a forwarded protocol trustworthy and after the request context, so
a rejection can echo the request id.
Refs backlog#2369 P7.2.
* fix(kms): say what a node-local backend means for a cluster
The Local backend keeps key material on each node's own disk and
generates its Argon2id salt per node, so two nodes derive different keys
from the same master_key and an object encrypted on one node cannot be
decrypted on another. Behind a load balancer that surfaces as
intermittent 500s on reads that succeeded moments earlier, with nothing
tying the symptom to the cause: the only signal was a generic
"development, testing and demos only" positioning warning that says
nothing about what actually breaks.
Configuring or reconfiguring Local while the deployment is distributed
now logs a dedicated event and appends the consequence to the configure
response, so the operator who made the change sees it. The product
decision to warn rather than refuse is unchanged.
Refs backlog#2369 P7.4.
* docs: record the remaining SSE and KMS changes for 1.0.0
Adds changelog entries for the KMS data-path status classification, the
Vault static-token lease probe, the SSE-C plaintext-transport report and
its switch, and the node-local backend warning.
Documents two things the backend security guide never stated: that SSE-C
belongs on a secure transport, with the counter and switch to plan the
change around, and that the Local backend cannot be shared by a
multi-node deployment because each node derives different keys from the
same master key.
Refs backlog#2368 B6; backlog#2369 P3, P5, P7.2, P7.4.
* fix(kms): report an unreadable key store as an outage on the S3 path
A backend now distinguishes a key store it could not read from a key
that is genuinely absent, but the S3 boundary collapsed the first one
back onto 500 InternalError through the fallthrough for integrity
faults. The distinction was therefore invisible to the client: a
temporary key-directory outage looked exactly like a permanently damaged
key record, and neither the status nor the metric said the request was
worth retrying.
An unreadable key store joins the retryable class and answers 503, next
to a backend error and a credential failure. Damaged, unreadable or
unknown-format key material keeps its 500.
Refs backlog#2368 B6; builds on rustfs/rustfs#7470.
chore(deps): update Crossbeam, Redis, DER, and ipnet
Refresh the shared concurrency, Redis client, DER decoding and IP network dependencies while retaining existing feature selections and the hotpath pin.
Co-authored-by: heihutu <heihutu@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Stop task completion and legacy notices from discharging scanner retry hints. Preserve existing hints and their retry due time across admission observations, bound retry scheduling, and synchronize changed batches once even on cancellation.
Exercise the production MRF consumer, manager, event channel and scanner ledger. Document producer durability gaps without enabling successor activation or garbage collection.
Co-authored-by: heihutu <heihutu@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* feat(ecstore): add a native azure blob odm source backend
* feat(ecstore): add a native gcs odm source backend and one backend contract
* fix(ecstore): refuse an empty azure account key at client build
* fix(ecstore): probe gcs sources with the listing permission
* fix(app): drop a redundant match guard on the sse config lookup
* fix(ecstore): drop stale rename commit duplicates from local.rs
* test(ecstore): use the sanctioned placeholder key in the gcs fixture
Add `tee_reader` / `tee_reader_with_options` in `rustfs-rio`: a
`TeePrimary` that drives the source and a `TeeSecondary` that observes
an identical copy of every chunk through a byte-bounded queue. The
primary returns `Pending` when the queue is full, so both sides advance
at the pace of the slowest consumer; it is meant for small objects only.
Termination: source EOF and errors propagate to the secondary with the
same `io::ErrorKind`; dropping the secondary turns the primary into a
pass-through; dropping the primary early fails the secondary with
`BrokenPipe` by default, or hands the remaining source to a background
drain task bounded by `max_drain_bytes` when
`TeeOptions::drain_on_primary_drop` is set. `TeeSecondary::into_stream`
exposes the queued `Bytes` chunks without an extra copy.
Includes a proptest equivalence test, backpressure, error, drop,
drain-limit and cancel-safety tests, and a criterion bench comparing
tee throughput against a direct read (64 MiB in 1 MiB chunks).
Update the workspace s3s pin and refresh the lockfile with cargo update/upgrade.
Remove the unused lifecycle url dependency reported by cargo shear.
Tighten the s3s footprint ratchet to the current observed baseline.
Update the s3s git dependency to 6e7b41252c7ba218a90886f58d297716ddf68acf.
This pulls the upstream SelectRequest XML alias compatibility fix while keeping the RustFS s3s compatibility boundary intact.
Co-authored-by: heihutu <heihutu@gmail.com>
chacha20 0.10.1 was yanked on crates.io today, which fails the Cargo Deny gate (error[yanked]) on every branch. cargo update -p chacha20 to 0.10.2; no API change, all dependents are semver-compatible.
Verification: cargo check -p rustfs-crypto; the Cargo Deny job on this PR is the authoritative gate.
* Revert "perf(ecstore): use AHashMap for FileInfo metadata fields (#6738)"
This reverts commit 13a2ae212e.
* fix(filemeta): restore standard HashMap metadata (#6742)
Remove the direct ahash dependency added for FileInfo metadata and revert the affected filemeta/ecstore call sites back to std::collections::HashMap.
Co-authored-by: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
Remove unused direct dependency declarations found by cargo-shear and delete the unlinked ecstore mimalloc diagnostics file.
Keep feature-forwarding dependencies explicit with package-local cargo-shear ignores so hotpath feature propagation remains intact.
Co-authored-by: heihutu <heihutu@gmail.com>
Every consumer now imports rustfs-heal-contracts / rustfs-scanner-contracts
directly and rg 'rustfs_common::(metrics|heal_channel|last_minute)' reports
zero hits, so the backlog#1843 re-export shims and the transitional
rustfs-common -> contracts dependency edges can go. rustfs-common no longer
recompiles on scanner/heal type changes. Doc references to the moved files
follow the new paths.
* refactor(ecstore): drop the client shim, import rustfs-s3-client directly
Completes the migration window opened by the rustfs-s3-client extraction (rustfs/backlog#1842 PR3): every consumer now imports the client crate directly and the crate::client shim is deleted.
- All in-crate crate::client:: paths (tier warm backends, tier core, lifecycle tier_sweeper, replication storage boundary, set_disk) now import rustfs_s3_client::* directly; crates/ecstore/src/client/mod.rs and the lib.rs mod client declaration are gone.
- The two server-side modules historically misfiled under client/ move to their real homes: object_api_utils.rs to crates/ecstore/src/object_api/ (it builds engine-side object readers/writers), and object_handlers_common.rs to crates/ecstore/src/bucket/lifecycle/ (it is the lifecycle noncurrent-version cleanup helper). The latter now routes its replication calls through the lifecycle replication_sink boundary (schedule_delete wrapper and the sink's ReplicationObjectBridge re-export), as the lifecycle guard requires.
- The ecstore public facade drops api::client: object_api_utils is exposed as api::object_api_utils, and the rustfs crate takes admin_handler_utils (AdminError) from rustfs-s3-client directly (new dependency).
- Guard updates: the migration guard no longer pins mod client in ecstore's lib.rs or the admin_handler_utils facade module (it pins the new api::object_api_utils facade instead), and the module-lint register follows object_api_utils.rs to its new path.
Verification: cargo check -p rustfs-ecstore --all-targets and -p rustfs; cargo fmt --all; tier/transition/lifecycle-focused nextest (626 passed) and the decommission/rebalance/heal families in a filtered run (603 passed; the full-suite parallel run only fails on this machine's known decommission/rebalance baseline flakes, which pass in filtered reruns and fail identically on pristine origin/main); layer/migration/s3s/logging/error-format/doc-path guard scripts all pass.
* docs(architecture): record the S3 client extraction and reword invariant 4 (#6669)
Closes the documentation step of rustfs/backlog#1842. ARCHITECTURE.md invariant 4 now states the serving-vs-consuming distinction the adversarial ruling asked for: ecstore must not serve HTTP/S3 wire types, while consuming remote S3 endpoints is a legitimate engine capability that lives in the extracted rustfs-s3-client crate. The violation note is updated from the pre-extraction snapshot (58 files, embedded client) to the current ratcheted state (shrink-only S3S_ECSTORE_FILES_BASELINE in scripts/check_s3s_footprint.sh, object_lock converted first), and the crate map gains s3-client. ecstore-module-split-plan.md gets the client-directory entry the plan was missing: a Current Shape row and a completed-extraction section describing the pure-move + shim + direct-import sequence and the re-homing of the two misfiled server-side modules.
* chore(deps): refresh s3s and related dependencies
Update the RustFS s3s git dependency to the requested f4dedc905 revision and keep the resolved dependency refresh from Cargo.
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(api): adapt s3s upload stream error mapping
Detect the s3s upload stream SHA256 mismatch through the error chain without relying on the removed crate-root re-export.
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(auth): preserve SigV2 S3 compatibility
Keep RustFS S3 service configuration explicit after the s3s default disables SigV2.
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
houseme