Merge branch 'fix/d1-master-statusbadge-enum-drift' (D-1 master, 5 audit findings)

Five audit findings, all category cat-d or cat-f, all rooted in two
frontend files. The dashboard silently lied:

  cat-d-359e92c20cbf [P1, primary] — Agent: 'Stale' dead key + 'Degraded'
                                     neutral fallthrough
  cat-d-9f4c8e4a91f1 [P2]          — Notification: 'dead' missing
  cat-d-1447e04732e7 [P3]          — Cert: 'PendingIssuance' dead key
  cat-f-cert_detail_page_key_render_fallback [P2] — render-site reads
                                                    cert.key_algorithm directly
  cat-f-ae0d06b6588f [P2]          — Certificate TS phantom fields (root cause)

Pre-D-1, agents in the only Go AgentStatus that means 'needs operator
attention' (Degraded) rendered as default neutral grey because StatusBadge
mapped 'Stale' (a key Go has never emitted) to yellow. Dead-letter
notifications visually equated with 'read' (operator-acknowledged). The
Certificate badge map carried a 'PendingIssuance' key no Go enum emits.
CertificateDetailPage's Key Algorithm and Key Size rows always rendered
'—' even when the data was a single fetch away — the lookup went through
cert.key_algorithm / cert.key_size directly, both phantom Certificate TS
fields. Trim the TS type so the missing-data case is explicit; fix the
render site to use latestVersion?.field; pin the contract with a 38-case
Vitest property test that walks every Go enum.

StatusBadge (web/src/components/StatusBadge.tsx)
- Drop 'Stale' (Agent dead key) + 'PendingIssuance' (Cert dead key).
- Add 'Degraded' (Agent → badge-warning) + 'dead' (Notification → badge-danger).
- Add leading docblock naming Go-side source-of-truth file for every
  status family and pointing at the property test as regression vector.

Property test (web/src/components/StatusBadge.test.tsx — 38 cases)
- Iterates every Go-emitted enum value (AgentStatus, CertificateStatus,
  JobStatus, NotificationStatus, DiscoveryStatus, HealthStatus) plus the
  two frontend-synthesized Enabled/Disabled labels, asserts every value
  gets a non-default class (or an explicit 'badge badge-neutral' for the
  five intentionally-neutral terminal values: Archived, Cancelled,
  Dismissed, read, unknown).
- Negative assertions: 'Stale' and 'PendingIssuance' must fall through
  to the dictionary default — re-adding either key surfaces here.
- Specific UX-correctness assertions: 'dead' → badge-danger,
  'Degraded' → badge-warning.
- Unknown-status fallthrough preserves label text.

Certificate TS trim (web/src/api/types.ts)
- Drop serial_number?, fingerprint_sha256?, key_algorithm?, key_size?,
  issued_at? from Certificate. Go's ManagedCertificate has never carried
  these — they live on CertificateVersion. Post-trim a cert.X access for
  any of the five fields is a TS compile error.
- Leading docblock cross-references the closure rationale and the
  latestVersion fallback pattern.

Render-site fix (web/src/pages/CertificateDetailPage.tsx)
- Key Algorithm / Key Size rows now read latestVersion?.key_algorithm /
  latestVersion?.key_size, mirroring the existing latestVersion fallback
  used a few lines above for serial_number / fingerprint_sha256.
- The same edit also tightened the serial / fingerprint / issued_at
  derivations to drop the now-impossible 'cert.X || latestVersion?.X'
  cert-side leg (cert.serial_number is a TS error post-trim).

Type-test regression (web/src/api/types.test.ts)
- Certificate literal construction pinned post-trim — adding any of the
  five fields back makes the literal an excess-property TS error.
- Sibling CertificateVersion literal pinning the trimmed fields still
  live on the version envelope (so the CertificateDetailPage fallback
  path can't break).

OpenAPI (api/openapi.yaml)
- ManagedCertificate schema unchanged — was already correct (no phantom
  fields). Added a leading comment cross-referencing the D-5 closure for
  future readers.

CI guardrail (.github/workflows/ci.yml)
- 'Forbidden StatusBadge dead-key + Certificate phantom-field regression
  guard (D-1)'. Two grep blocks: catches Stale/PendingIssuance map
  literals in StatusBadge.tsx; uses an awk-scoped window over the
  'export interface Certificate {' block in types.ts to catch the five
  phantom fields reappearing while explicitly excluding CertificateVersion
  (which legitimately carries them). Comments + test files exempt.

Verification
- Backend build/vet/test -short -race all clean across handler/router/
  middleware packages.
- Frontend tsc --noEmit clean.
- Vitest 256 → 296 tests (+40: 38 from new StatusBadge test, 2 from D-5
  Certificate trim regression in types.test.ts).
- OpenAPI YAML parses (87 paths).
- Both CI guardrail patterns clear on the post-fix tree; both fire
  against synthetic regression patterns (re-add Stale → fires; re-add
  serial_number? to Certificate → fires).

Out of scope (deferred)
- diff-05x06-* type drifts for Agent/DeploymentTarget/Notification/
  DiscoveredCertificate/Issuer TS interfaces. Per-type field-by-field
  Go ↔ TS diff is codegen-shaped, not edit-shaped — warrants its own
  D-2 master prompt. Noted in CHANGELOG follow-ups section.

.env.example

@@ -13,22 +13,43 @@ POSTGRES_PASSWORD=change-me-in-production
 # Certctl Server
 # All server vars use the CERTCTL_ prefix (see internal/config/config.go)
 # ==============================================================================
-CERTCTL_DATABASE_URL=postgres://certctl:certctl@postgres:5432/certctl?sslmode=disable
+# IMPORTANT: keep the password segment of CERTCTL_DATABASE_URL in sync with
+# POSTGRES_PASSWORD above. If you deploy via `deploy/docker-compose.yml`,
+# this value is *overridden* by the compose file's
+# `postgres://certctl:${POSTGRES_PASSWORD:-certctl}@postgres:5432/...`
+# interpolation — but if you run the binary directly with this .env loaded
+# (e.g. `set -a; source .env; ./certctl-server`), update *both* lines.
+# Background: editing POSTGRES_PASSWORD after the postgres data directory
+# has been initialized once does NOT rotate the password — initdb only
+# seeds pg_authid on first boot of an empty volume. See docs/quickstart.md
+# "Warning" callout and `internal/repository/postgres/db.go::wrapPingError`
+# for the SQLSTATE 28P01 diagnostic that fires when the two drift.
+CERTCTL_DATABASE_URL=postgres://certctl:change-me-in-production@postgres:5432/certctl?sslmode=disable
 CERTCTL_SERVER_HOST=0.0.0.0
 CERTCTL_SERVER_PORT=8443
 CERTCTL_LOG_LEVEL=info
 CERTCTL_LOG_FORMAT=json
 
-# Auth type: "api-key", "jwt", or "none" (for demo/development)
+# Auth type: "api-key" (production) or "none" (demo/development).
+# For JWT/OIDC, run an authenticating gateway in front of certctl
+# (oauth2-proxy / Envoy ext_authz / Traefik ForwardAuth / Pomerium) and
+# set CERTCTL_AUTH_TYPE=none on the upstream — see
+# docs/architecture.md "Authenticating-gateway pattern". G-1 removed
+# the in-process "jwt" option (no JWT middleware shipped — silent auth
+# downgrade); see docs/upgrade-to-v2-jwt-removal.md if you previously
+# set CERTCTL_AUTH_TYPE=jwt.
 CERTCTL_AUTH_TYPE=none
-# Required when CERTCTL_AUTH_TYPE is "api-key" or "jwt"
+# Required when CERTCTL_AUTH_TYPE is "api-key".
 # Generate with: openssl rand -base64 32
 # CERTCTL_AUTH_SECRET=change-me-in-production
 
 # ==============================================================================
 # Certctl Agent
 # ==============================================================================
-CERTCTL_SERVER_URL=http://localhost:8443
+# HTTPS-only as of v2.2 (TLS 1.3 pinned). Agents reject http:// URLs at
+# startup. Use the docker-compose self-signed bootstrap CA bundle from
+# `deploy/test/certs/ca.crt` or supply your own via CERTCTL_SERVER_CA_BUNDLE_PATH.
+CERTCTL_SERVER_URL=https://localhost:8443
 CERTCTL_API_KEY=change-me-in-production
 CERTCTL_AGENT_NAME=local-agent
 

.github/workflows/ci.yml

@@ -44,6 +44,306 @@ jobs:
       - name: Run govulncheck
         run: govulncheck ./...
 
+      - name: Forbidden auth-type literal regression guard (G-1)
+        # G-1 closed the JWT silent auth downgrade by removing "jwt" from the
+        # accepted CERTCTL_AUTH_TYPE values. This step grep-fails the build
+        # if "jwt" reappears in any of the *additive* auth-type surfaces:
+        # the validAuthTypes / ValidAuthTypes() set, the OpenAPI enum, the
+        # helm chart's allowed-types list, or the .env.example default.
+        # Comment lines and the dedicated rejection branch in config.go
+        # (`c.Auth.Type == "jwt"`) are intentionally exempt — those are the
+        # G-1 fix itself, not a regression.
+        #
+        # Connector packages (internal/connector/) are exempt because the
+        # Google OAuth2 service-account JWT and step-ca provisioner one-
+        # time-token JWT are external-protocol uses, unrelated to certctl's
+        # own auth shape. Test files (_test.go) are exempt so negative
+        # tests can pass the literal.
+        #
+        # See docs/upgrade-to-v2-jwt-removal.md for the closure rationale,
+        # or internal/config/config.go::ValidAuthTypes for the allowed set.
+        run: |
+          set -e
+
+          # Scoped patterns that indicate "jwt" being added back to an
+          # allowed-set surface. Each catches a regression shape we've
+          # actually seen in pre-G-1 code:
+          #   - Go map/slice literal:  "jwt": true   or   "jwt",
+          #   - Go switch case:        case "jwt"
+          #   - YAML enum:             enum: [..., jwt, ...]   or   - jwt
+          #   - .env conditional:      AUTH_TYPE.*"jwt"|=jwt$
+          BAD=$(grep -rnEH \
+              -e '"jwt"\s*:\s*true' \
+              -e '"jwt"\s*,' \
+              -e 'case\s+"jwt"' \
+              -e 'enum:.*\bjwt\b' \
+              -e '^\s*-\s*jwt\s*$' \
+              -e 'AUTH_TYPE\s*=\s*jwt\s*$' \
+              -e 'AUTH_TYPE\s*=\s*jwt\s*#' \
+              -e 'auth\.type\s*=\s*jwt\s*$' \
+              -e 'AuthType\("jwt"\)' \
+              internal/config/ \
+              internal/api/ \
+              cmd/ \
+              api/openapi.yaml \
+              .env.example \
+              deploy/.env.example \
+              deploy/helm/certctl/values.yaml \
+              deploy/helm/certctl/templates/ \
+              2>/dev/null \
+              | grep -v '_test.go' \
+              | grep -vE '^\s*[^:]+:[0-9]+:\s*(//|#)' \
+              | grep -v 'is no longer accepted' \
+              || true)
+          if [ -n "$BAD" ]; then
+            echo "G-1 regression: \"jwt\" reappeared in an allowed-set surface:"
+            echo "$BAD"
+            echo ""
+            echo "Allowed surface for 'jwt' literals: comment lines, the"
+            echo "dedicated rejection branch in internal/config/config.go,"
+            echo "and connector packages (Google OAuth2, step-ca)."
+            echo "See docs/upgrade-to-v2-jwt-removal.md and"
+            echo "internal/config/config.go::ValidAuthTypes()."
+            exit 1
+          fi
+
+      - name: Forbidden api_key_hash JSON-shape regression guard (G-2)
+        # G-2 closed cat-s5-apikey_leak by tagging Agent.APIKeyHash
+        # `json:"-"` and adding a defense-in-depth Agent.MarshalJSON that
+        # zeroes the field on the marshal-time copy. This step grep-fails
+        # the build if `api_key_hash` reappears in any of the *additive*
+        # JSON-emitting surfaces: a Go struct json tag in internal/domain/,
+        # an OpenAPI Agent schema property, a TypeScript field declaration
+        # in web/src/, or an enum-list / discriminator in handler
+        # production code.
+        #
+        # Repository, migration, seed, service, integration-test, and
+        # unit-test files are exempt — those are server-internal use
+        # sites (the DB column stays, the in-memory struct field stays,
+        # the auth-lookup path stays). Comment lines are exempt so the
+        # G-2 closure rationale can stay in the source.
+        #
+        # See coverage-gap-audit-2026-04-24-v5/unified-audit.md
+        # cat-s5-apikey_leak for the closure rationale, or
+        # internal/domain/connector.go::Agent::MarshalJSON for the
+        # redaction enforcement.
+        run: |
+          set -e
+
+          # Scoped patterns that indicate api_key_hash being added back
+          # to a JSON-emitting surface. Each catches a regression shape
+          # that pre-G-2 actually shipped or that a future refactor
+          # could plausibly introduce:
+          #   - Go struct tag:           `json:"api_key_hash"`
+          #   - Frontend interface:      api_key_hash[?]: string
+          #   - OpenAPI schema property: api_key_hash:   (column-aligned)
+          #   - YAML enum / array:       - api_key_hash
+          BAD=$(grep -rnEH \
+              -e 'json:"api_key_hash[",]' \
+              -e '^\s*api_key_hash\??\s*:' \
+              -e '^\s*-\s*api_key_hash\s*$' \
+              internal/domain/ \
+              internal/api/ \
+              cmd/ \
+              api/openapi.yaml \
+              web/src/ \
+              2>/dev/null \
+              | grep -v '_test.go' \
+              | grep -vE '^\s*[^:]+:[0-9]+:\s*(//|#)' \
+              || true)
+          if [ -n "$BAD" ]; then
+            echo "G-2 regression: api_key_hash reappeared in a JSON-emitting surface:"
+            echo "$BAD"
+            echo ""
+            echo "Allowed surface for api_key_hash literals: comment lines,"
+            echo "the database column (migrations/), the in-memory struct"
+            echo "field tagged \`json:\"-\"\`, and the repository / service"
+            echo "use sites. See internal/domain/connector.go::Agent and"
+            echo "coverage-gap-audit-2026-04-24-v5/unified-audit.md"
+            echo "cat-s5-apikey_leak for the closure rationale."
+            exit 1
+          fi
+
+      - name: Forbidden plaintext HEALTHCHECK regression guard (U-2)
+        # U-2 closed cat-u-healthcheck_protocol_mismatch by switching the
+        # published image's HEALTHCHECK from `curl -f http://localhost:
+        # 8443/health` (always failed against the HTTPS-only listener) to
+        # `curl -fsk https://localhost:8443/health`. This step grep-fails
+        # the build if any Dockerfile in the repo carries the pre-U-2
+        # plaintext shape — either explicitly (`http://localhost:8443/
+        # health` in a HEALTHCHECK) or via the looser pattern of any
+        # HEALTHCHECK that targets `http://` against the certctl server
+        # port.
+        #
+        # Comment lines and the docs/upgrade-to-tls.md:182 expected-to-
+        # fail invariant ("plaintext is gone, expect Connection refused")
+        # are intentionally exempt — we DO want the upgrade-doc string
+        # `http://localhost:8443/health` to remain there, since it
+        # documents what operators should test for to confirm plaintext
+        # is dead. The guardrail is scoped to Dockerfile* only, so docs
+        # are out of its reach.
+        #
+        # See coverage-gap-audit-2026-04-24-v5/unified-audit.md
+        # cat-u-healthcheck_protocol_mismatch for the closure rationale,
+        # or deploy/test/healthcheck_test.go for the binary-image
+        # contract the runtime test pins.
+        run: |
+          set -e
+
+          # Patterns that catch the actual regression shapes:
+          #   - HEALTHCHECK directive carrying any http:// (even if the
+          #     port differs, no plaintext probe should ship).
+          #   - The exact pre-U-2 string for grep-friendliness.
+          BAD=$(grep -rnEH \
+              -e 'HEALTHCHECK.*http://' \
+              -e 'curl[^|&;]*-f[^|&;]*http://localhost:8443/health' \
+              Dockerfile Dockerfile.agent Dockerfile.* 2>/dev/null \
+              | grep -vE '^\s*[^:]+:[0-9]+:\s*#' \
+              || true)
+          if [ -n "$BAD" ]; then
+            echo "U-2 regression: plaintext HEALTHCHECK reappeared in a Dockerfile:"
+            echo "$BAD"
+            echo ""
+            echo "Allowed: HTTPS HEALTHCHECK with -k (acceptable for"
+            echo "localhost-to-localhost), or non-HTTP probe shapes"
+            echo "(pgrep, /proc check). See Dockerfile / Dockerfile.agent"
+            echo "for the post-U-2 reference shape and"
+            echo "coverage-gap-audit-2026-04-24-v5/unified-audit.md"
+            echo "cat-u-healthcheck_protocol_mismatch for rationale."
+            exit 1
+          fi
+
+      - name: Forbidden migration mount in compose initdb (U-3)
+        # U-3 closed cat-u-seed_initdb_schema_drift (GitHub #10) by
+        # eliminating the dual-source-of-truth between
+        # `migrations/*.up.sql` mounted into postgres
+        # `/docker-entrypoint-initdb.d/` and the same files re-applied at
+        # runtime by `RunMigrations`. Pre-U-3 every new migration that
+        # the seed depended on (000013 added `policy_rules.severity`,
+        # 000017 renames `retry_interval_seconds`, etc.) had to be added
+        # by hand to the compose mount list; missing the update crashed
+        # initdb on first boot, postgres flagged unhealthy, and the
+        # whole stack failed to start from a fresh clone. Post-U-3 the
+        # server is the single source of truth — `RunMigrations` +
+        # `RunSeed` apply everything at boot.
+        #
+        # This step grep-fails the build if any compose file under
+        # `deploy/` re-introduces a `migrations/.*\.sql` mount into
+        # `/docker-entrypoint-initdb.d`. Comments are exempt so the
+        # post-fix rationale block in the compose files (which
+        # documents WHY the mounts were removed) doesn't trip the guard.
+        # The demo overlay's `seed_demo.sql` is the explicit exception:
+        # it is tolerated only when it lives behind the
+        # CERTCTL_DEMO_SEED env var (post-U-3 demo path) — bare initdb
+        # mounts are NOT tolerated. The grep matches all compose
+        # mount-list shapes (`-` indented, `volumes:` indented, both),
+        # so any future drift surfaces here before the operator hits it
+        # on a fresh clone.
+        #
+        # See coverage-gap-audit-2026-04-24-v5/unified-audit.md
+        # cat-u-seed_initdb_schema_drift for the closure rationale, or
+        # internal/repository/postgres/db.go::RunSeed for the runtime
+        # contract.
+        run: |
+          set -e
+
+          BAD=$(grep -rnEH \
+              -e 'migrations/.*\.sql:.*docker-entrypoint-initdb' \
+              -e 'seed.*\.sql:.*docker-entrypoint-initdb' \
+              deploy/docker-compose.yml \
+              deploy/docker-compose.test.yml \
+              deploy/docker-compose.demo.yml \
+              2>/dev/null \
+              | grep -vE '^\s*[^:]+:[0-9]+:\s*#' \
+              || true)
+          if [ -n "$BAD" ]; then
+            echo "U-3 regression: migration/seed mount into postgres initdb reappeared:"
+            echo "$BAD"
+            echo ""
+            echo "The post-U-3 contract is: postgres comes up with an empty"
+            echo "schema and the server applies migrations + seed at boot via"
+            echo "internal/repository/postgres.RunMigrations + RunSeed. Demo"
+            echo "data lives behind CERTCTL_DEMO_SEED=true (RunDemoSeed),"
+            echo "not an initdb mount. See"
+            echo "coverage-gap-audit-2026-04-24-v5/unified-audit.md"
+            echo "cat-u-seed_initdb_schema_drift for the closure rationale."
+            exit 1
+          fi
+
+      - name: Forbidden StatusBadge dead-key + Certificate phantom-field regression guard (D-1)
+        # D-1 master closed cat-d-359e92c20cbf (Agent: 'Stale' dead key,
+        # 'Degraded' missing), cat-d-9f4c8e4a91f1 (Notification: 'dead'
+        # missing), cat-d-1447e04732e7 (Cert: 'PendingIssuance' dead
+        # key), cat-f-cert_detail_page_key_render_fallback (render-site
+        # uses cert.X directly), and cat-f-ae0d06b6588f (Certificate
+        # TS phantom fields). This step grep-fails the build if either
+        # half of the closure is reverted:
+        #
+        #   1. The dead StatusBadge keys ('Stale' for Agent, 'PendingIssuance'
+        #      for Cert) reappearing as map literals, OR
+        #   2. The five phantom Certificate TS fields (serial_number,
+        #      fingerprint_sha256, key_algorithm, key_size, issued_at)
+        #      reappearing on the `Certificate` interface in types.ts
+        #      (CertificateVersion legitimately carries them and is
+        #      explicitly excluded by the awk pre-filter below).
+        #
+        # Comments are exempt so the closure prose in StatusBadge.tsx +
+        # types.ts can stay. Test files are exempt so negative tests
+        # asserting the dead keys fall through to neutral keep working.
+        #
+        # See coverage-gap-audit-2026-04-24-v5/unified-audit.md
+        # cat-d-* / cat-f-* for the closure rationale, or
+        # web/src/components/StatusBadge.test.tsx for the live
+        # enum-coverage contract.
+        run: |
+          set -e
+
+          BAD_BADGE=$(grep -nE "^\s*(Stale|PendingIssuance)\s*:\s*'badge-" \
+              web/src/components/StatusBadge.tsx 2>/dev/null \
+              | grep -v '\.test\.' \
+              | grep -vE '^\s*[^:]+:[0-9]+:\s*//' \
+              || true)
+          if [ -n "$BAD_BADGE" ]; then
+            echo "D-1 regression: dead StatusBadge key reappeared:"
+            echo "$BAD_BADGE"
+            echo ""
+            echo "Allowed surface: comment lines naming the removed key in"
+            echo "the file's preamble. The Go-side AgentStatus values are"
+            echo "Online/Offline/Degraded (no Stale); CertificateStatus values"
+            echo "are Pending/Active/... (no PendingIssuance). See"
+            echo "web/src/components/StatusBadge.test.tsx for the contract."
+            exit 1
+          fi
+
+          # Certificate TS phantom-field check. Scoped to the
+          # `export interface Certificate {` block in web/src/api/types.ts
+          # — CertificateVersion legitimately declares these fields and
+          # must NOT trip the guardrail. The awk window opens on the
+          # exact `Certificate {` header (not `CertificateVersion {`,
+          # not `CertificateProfile {`) and closes at the first `}`,
+          # then the grep matches a phantom-field declaration anywhere
+          # in that window.
+          BAD_TS=$(awk '
+            /^export interface Certificate \{/ { flag=1; next }
+            flag && /^\}/                     { flag=0 }
+            flag                              { print FILENAME":"NR":"$0 }
+          ' web/src/api/types.ts \
+            | grep -E '\b(serial_number|fingerprint_sha256|key_algorithm|key_size|issued_at)\??\s*:' \
+            || true)
+          if [ -n "$BAD_TS" ]; then
+            echo "D-1 regression: Certificate TS interface re-added a phantom field:"
+            echo "$BAD_TS"
+            echo ""
+            echo "These fields live on CertificateVersion, not ManagedCertificate."
+            echo "The Go-side ManagedCertificate has never carried them; the"
+            echo "TS optional declarations were silently undefined on every"
+            echo "list response. Render-site consumers (e.g. CertificateDetailPage)"
+            echo "use latestVersion?.field as the canonical access path."
+            echo "See coverage-gap-audit-2026-04-24-v5/unified-audit.md"
+            echo "cat-f-ae0d06b6588f for the closure rationale."
+            exit 1
+          fi
+
       - name: Race Detection
         run: go test -race ./internal/service/... ./internal/api/handler/... ./internal/api/middleware/... ./internal/scheduler/... ./internal/connector/... ./internal/crypto/... ./internal/domain/... ./internal/validation/... ./internal/tlsprobe/... -count=1 -timeout 300s
 
@@ -148,8 +448,34 @@ jobs:
         with:
           version: '3.13.0'
 
+      # HTTPS-Everywhere (v2.0.47): the chart fails render when no TLS source is
+      # configured. Every lint/template invocation below must pick exactly one
+      # provisioning mode — see deploy/helm/certctl/templates/_helpers.tpl
+      # (certctl.tls.required) and docs/tls.md.
       - name: Lint Helm Chart
-        run: helm lint deploy/helm/certctl/
+        run: |
+          helm lint deploy/helm/certctl/ \
+            --set server.tls.existingSecret=certctl-tls-ci
 
-      - name: Template Helm Chart
-        run: helm template certctl deploy/helm/certctl/ > /dev/null
+      - name: Template Helm Chart (existingSecret mode)
+        run: |
+          helm template certctl deploy/helm/certctl/ \
+            --set server.tls.existingSecret=certctl-tls-ci \
+            > /dev/null
+
+      - name: Template Helm Chart (cert-manager mode)
+        run: |
+          helm template certctl deploy/helm/certctl/ \
+            --set server.tls.certManager.enabled=true \
+            --set server.tls.certManager.issuerRef.name=letsencrypt-prod \
+            > /dev/null
+
+      - name: Template Helm Chart (guard fails without TLS)
+        run: |
+          # Inverse test: the chart MUST refuse to render when no TLS source is
+          # configured. If this ever renders successfully, the fail-loud guard
+          # in certctl.tls.required has regressed.
+          if helm template certctl deploy/helm/certctl/ > /dev/null 2>&1; then
+            echo "::error::Helm chart rendered without a TLS source — fail-loud guard regressed"
+            exit 1
+          fi

.github/workflows/release.yml

@@ -79,10 +79,14 @@ jobs:
           OUTPUT_NAME: ${{ steps.build.outputs.output_name }}
         run: |
           set -euo pipefail
+          # Cosign v3.0 (shipped by cosign-installer@v4.1.1 default
+          # cosign-release=v3.0.5) removed --output-signature/--output-certificate
+          # on sign-blob. The replacement is --bundle, which emits a unified
+          # Sigstore bundle (signature + cert chain + Rekor inclusion proof) as
+          # a single .sigstore.json artefact. M-11.
           cosign sign-blob \
             --yes \
-            --output-signature "dist/${OUTPUT_NAME}.sig" \
-            --output-certificate "dist/${OUTPUT_NAME}.pem" \
+            --bundle "dist/${OUTPUT_NAME}.sigstore.json" \
             "dist/${OUTPUT_NAME}"
 
       - name: Compute SHA-256 sidecar
@@ -100,8 +104,7 @@ jobs:
           name: binary-${{ steps.build.outputs.output_name }}
           path: |
             dist/${{ steps.build.outputs.output_name }}
-            dist/${{ steps.build.outputs.output_name }}.sig
-            dist/${{ steps.build.outputs.output_name }}.pem
+            dist/${{ steps.build.outputs.output_name }}.sigstore.json
             dist/${{ steps.build.outputs.output_name }}.sbom.spdx.json
             dist/${{ steps.build.outputs.output_name }}.sha256
           if-no-files-found: error
@@ -138,7 +141,7 @@ jobs:
           : > checksums.txt
           for f in certctl-*; do
             case "$f" in
-              *.sig|*.pem|*.sbom.spdx.json|*.sha256|checksums.txt)
+              *.sigstore.json|*.sbom.spdx.json|*.sha256|checksums.txt)
                 continue ;;
             esac
             sha256sum "$f" >> checksums.txt
@@ -156,10 +159,11 @@ jobs:
         run: |
           set -euo pipefail
           cd artifacts
+          # Cosign v3.0 --bundle replaces the removed v2 flag pair
+          # --output-signature / --output-certificate. See M-11.
           cosign sign-blob \
             --yes \
-            --output-signature checksums.txt.sig \
-            --output-certificate checksums.txt.pem \
+            --bundle checksums.txt.sigstore.json \
             checksums.txt
 
       - name: Upload artefacts to GitHub Release
@@ -169,8 +173,7 @@ jobs:
           files: |
             artifacts/certctl-*
             artifacts/checksums.txt
-            artifacts/checksums.txt.sig
-            artifacts/checksums.txt.pem
+            artifacts/checksums.txt.sigstore.json
 
   # ----------------------------------------------------------------------
   # provenance-binaries (M-3): SLSA Level 3 provenance for every binary.
@@ -402,15 +405,15 @@ jobs:
 
             ```bash
             cosign verify-blob \
-              --certificate checksums.txt.pem \
-              --signature checksums.txt.sig \
+              --bundle checksums.txt.sigstore.json \
               --certificate-identity-regexp '^https://github\.com/shankar0123/certctl/\.github/workflows/release\.yml@refs/tags/' \
               --certificate-oidc-issuer 'https://token.actions.githubusercontent.com' \
               checksums.txt
             ```
 
             Replace `checksums.txt` with any individual binary name to verify that
-            artefact directly (each binary ships with its own `.sig` + `.pem` sidecar).
+            artefact directly (each binary ships with its own `.sigstore.json`
+            bundle, e.g. `cosign verify-blob --bundle certctl-agent-linux-amd64.sigstore.json …`).
 
             **3. Verify SLSA Level 3 provenance (binaries):**
 

.gitignore

@@ -63,12 +63,28 @@ certctl-cli
 /server
 /agent
 /cli
+/mcp-server
 
 # Private strategy docs
-strategy.md
 SECURITY_REMEDIATION.md
 
 # OS
 .DS_Store
 Thumbs.db
-mcp-server
+
+# Local Go build/module caches (session-scoped, never committed)
+/.gocache/
+/.gomodcache/
+/.gopath/
+/.gomodcache-gopath/
+
+# Design scratch files (session-scoped)
+/.i004-design.md
+/.i005-design.md
+
+# HTTPS-Everywhere (M-007) Phase 6: the docker-compose.test.yml tls-init
+# container writes ca.crt / server.crt / server.key into this directory so
+# the host-side integration_test.go binary can pin the CA via
+# CERTCTL_TEST_CA_BUNDLE=./certs/ca.crt. Material is regenerated on every
+# `docker compose up` and never belongs in git.
+/deploy/test/certs/

CHANGELOG.md

@@ -0,0 +1,177 @@
+# Changelog
+
+All notable changes to certctl are documented in this file. Dates use ISO 8601. Versions follow [Semantic Versioning](https://semver.org/).
+
+## [unreleased] — 2026-04-25
+
+### D-1: StatusBadge enum drift + Certificate phantom fields — closed end-to-end
+
+> The dashboard silently lied in five places. Agents in the `Degraded` state (the only Go-side AgentStatus that means "needs operator attention") rendered as default neutral grey because StatusBadge mapped `Stale` (a key Go has never emitted) to yellow and let the real `Degraded` value fall through to the dictionary default. Dead-letter notifications (`status: 'dead'`, retries exhausted) rendered as default neutral, visually equated with `read` (operator-acknowledged). The Certificate badge map carried a `PendingIssuance` key that no Go enum value ever emits — dead key, latent confusion vector. CertificateDetailPage's Key Algorithm and Key Size rows always rendered `—` even when the data was a single fetch away, because the lookup went through `cert.key_algorithm` directly — and the underlying `Certificate` TypeScript interface declared five optional fields (`serial_number`, `fingerprint_sha256`, `key_algorithm`, `key_size`, `issued_at`) that Go's `ManagedCertificate` has never carried (those values live on `CertificateVersion`). Five findings, two files, one frontend rebuild. Pre-D-1 the only reason this didn't trip a regression suite was that the regression suite never asserted "every Go-emitted enum value gets a non-default StatusBadge class" — D-1 fixes the visual lies and adds a 38-case Vitest property test that walks every Go enum and pins the contract.
+
+### Breaking Changes
+
+- **`Certificate` TypeScript interface no longer declares `serial_number?`, `fingerprint_sha256?`, `key_algorithm?`, `key_size?`, or `issued_at?`.** The Go `ManagedCertificate` (`internal/domain/certificate.go`) has never emitted these fields on list responses; they live on `CertificateVersion` and are reachable via `getCertificateVersions(id)`. Pre-D-5 (the cat-f phantom-fields finding) the optional declarations made `cert.X` always-undefined on lists, and downstream consumers silently rendered `—` for every cert. Post-D-5 a `cert.X` access for any of the five fields is a TypeScript compile error, forcing every consumer to acknowledge the version-fallback pattern. The OpenAPI `ManagedCertificate` schema was already correct — only the TS type was drifted.
+- **StatusBadge no longer maps `Stale` (Agent) or `PendingIssuance` (Certificate).** Both were dead keys — no Go enum value emits them. Operators with custom CSS hooked off `.badge-warning` for `Stale` will see the same color come back via the new `Degraded` mapping (same class), but JS/TS code that switches on the literal `'Stale'` will need to switch on `'Degraded'` instead. The `PendingIssuance` deletion has no documented downstream consumer.
+
+### Added
+
+- **`web/src/components/StatusBadge.tsx`: `Degraded` (Agent) → `badge-warning` and `dead` (Notification) → `badge-danger`.** First mappings restore the color contract for the two real Go-side values that previously fell through to the dictionary default. The `Degraded` mapping cross-references `internal/domain/connector.go::AgentStatusDegraded`; the `dead` mapping cross-references `internal/domain/notification.go::NotificationStatusDead`.
+- **`web/src/components/StatusBadge.test.tsx`: 38-case Vitest property test.** Iterates every Go-side enum value (`AgentStatus`, `CertificateStatus`, `JobStatus`, `NotificationStatus`, `DiscoveryStatus`, `HealthStatus`) plus the two frontend-synthesized `Enabled`/`Disabled` labels, asserts every value gets a non-default class (or, for the five intentionally-neutral terminal values like `Archived`/`Cancelled`/`read`, an explicit `badge badge-neutral`). Includes negative assertions on the deleted `Stale` and `PendingIssuance` keys (must fall through to neutral) and specific UX-correctness assertions on the operator-attention semantics (`dead` → danger, `Degraded` → warning).
+- **`web/src/api/types.test.ts`: D-5 Certificate phantom-fields trim regression.** A `Certificate` literal construction pinned post-trim, plus a sibling `CertificateVersion` literal pinning that the trimmed fields still live on the version envelope. The `tsc --noEmit` gate in CI is the primary enforcement; the test is the documentation of intent.
+- **CI regression guardrail in `.github/workflows/ci.yml` (`Forbidden StatusBadge dead-key + Certificate phantom-field regression guard (D-1)`).** Two grep blocks: (1) catches `Stale: 'badge-...'` or `PendingIssuance: 'badge-...'` in `web/src/components/StatusBadge.tsx`; (2) uses an awk-scoped window over the `export interface Certificate {` block in `web/src/api/types.ts` to catch any of the five phantom fields reappearing — explicitly excludes the `CertificateVersion` block which legitimately carries them. Verified locally on the post-fix tree (passes) and against synthetic regressions (each fires the guardrail).
+
+### Changed
+
+- **`web/src/pages/CertificateDetailPage.tsx`: Key Algorithm and Key Size rows now read from `latestVersion?.key_algorithm` / `latestVersion?.key_size`.** Mirrors the existing `latestVersion` fallback used for `serial_number` and `fingerprint_sha256` earlier in the same file. Pre-D-4 these rows accessed `cert.key_algorithm` and `cert.key_size` directly — both phantom fields per D-5 — so the rows always rendered `—`. The same file's `serial_number` / `fingerprint_sha256` / `issued_at` derivations were also simplified to drop the now-impossible `cert.X || latestVersion?.X` cert-side leg.
+- **`web/src/components/StatusBadge.tsx` adds a leading docblock** naming the Go-side source-of-truth file for every status family it maps (`AgentStatus`, `CertificateStatus`, `JobStatus`, `NotificationStatus`, `DiscoveryStatus`, `HealthStatus`) and pointing at the property test as the regression vector for future enum changes.
+- **`api/openapi.yaml::ManagedCertificate`** gets a leading comment cross-referencing the D-5 closure and explaining why per-issuance fields legitimately don't appear here (they live on `CertificateVersion`). Schema property list unchanged — the OpenAPI spec was already correct.
+
+### Closed audit findings
+
+- `cat-d-359e92c20cbf` (P1 primary) — Agent: `Stale` dead key + `Degraded` neutral fallthrough
+- `cat-d-9f4c8e4a91f1` (P2) — Notification: `dead` missing
+- `cat-d-1447e04732e7` (P3) — Certificate: `PendingIssuance` dead key
+- `cat-f-cert_detail_page_key_render_fallback` (P2) — render-site uses `cert.key_algorithm` directly
+- `cat-f-ae0d06b6588f` (P2) — Certificate TS phantom fields (root cause)
+
+### Known follow-ups (deferred from D-1 scope)
+
+The audit's broader type-drift cluster (`diff-05x06-7cdf4e78ae24` Agent TS, `diff-05x06-2044a46f4dd0` DeploymentTarget TS, `diff-05x06-caba9eb3620e` Notification TS, `diff-05x06-85ab6b98a2f7` DiscoveredCertificate TS, `diff-05x06-97fab8783a5c` Issuer TS) is out of D-1 scope. Recon for those is per-type field-by-field diff Go ↔ TS — codegen-shaped, not edit-shaped — and warrants its own D-2 master prompt.
+
+### U-3: GitHub #10 reopened — fresh-clone first-up postgres init failure (P1) — closed end-to-end
+
+> Operator `mikeakasully` cloned v2.0.50 fresh, ran the canonical quickstart `docker compose -f deploy/docker-compose.yml up -d --build`, and postgres reported `unhealthy` indefinitely; dependent containers (certctl-server, certctl-agent) never started. Root cause: the deploy compose stack mounted both a hand-curated subset of `migrations/*.up.sql` and `seed.sql` into postgres `/docker-entrypoint-initdb.d/`. Postgres applied them at initdb time. Once `seed.sql` referenced columns added by migrations *after* the mounted cutoff (e.g., `policy_rules.severity` from migration 000013, which the mount list never included), initdb crashed mid-seed and the container loop wedged. Two sources of truth — the mount list and the in-tree migration ladder — diverged the moment a seed-touching migration shipped, and the only thing that fixed it was hand-editing the compose file every release. The U-3 closure removes the dual source: postgres now boots empty and the server applies the entire migration ladder + seed at startup via `RunMigrations` + `RunSeed`. Same pattern Helm has used since day one. Bundled with four ride-along audit findings whose fixes are in adjacent code (column rename, missing column, dropped orphan columns, new build-identity endpoint) so operators take the schema-change pain only once.
+
+### Breaking Changes
+
+- **`deploy/docker-compose.yml` postgres no longer initdb-mounts the migration files or `seed.sql`.** Operators running on a populated `postgres_data` volume from a pre-U-3 release see no behavioral change (the schema is already in place; `RunMigrations` is `IF NOT EXISTS` and `RunSeed` is `ON CONFLICT DO NOTHING`). Operators running on a *fresh* clone now rely on the server to apply both — which is the bug fix. There is no rollback path other than re-introducing the dual-source-of-truth hazard. See `internal/repository/postgres/db.go::RunSeed` for the runtime contract.
+- **`migrations/000017_db_coupling_cleanup.up.sql` renames `renewal_policies.retry_interval_minutes` → `retry_interval_seconds`.** The column always held seconds; the column name lied (`cat-o-retry_interval_unit_mismatch`). Operators running raw SQL against the old name need to update their queries. The Go layer (`internal/repository/postgres/renewal_policy.go`) is updated in lockstep so the in-tree code path is unaffected.
+- **`migrations/000017_db_coupling_cleanup.up.sql` drops `network_scan_targets.health_check_enabled` and `network_scan_targets.health_check_interval_seconds`.** These columns were declared by a long-ago migration but never wired into Go code (`cat-o-health_check_column_orphans`) — schema noise that confused operators reading raw SQL. Anyone with custom dashboards selecting those columns will break.
+- **The compose demo overlay (`deploy/docker-compose.demo.yml`) no longer initdb-mounts `seed_demo.sql`.** It now sets `CERTCTL_DEMO_SEED=true` and the server applies the demo seed at boot via `RunDemoSeed` after baseline migrations + seed.sql are in place. Same single-source-of-truth pattern as the production path.
+
+### Added
+
+- **Migration `000017_db_coupling_cleanup`** (up + down). Bundles three schema changes in idempotent SQL: (1) rename `renewal_policies.retry_interval_minutes` → `retry_interval_seconds` (DO $$ guard so re-application is safe), (2) add `notification_events.created_at TIMESTAMPTZ NOT NULL DEFAULT NOW()`, (3) drop the orphan `network_scan_targets.health_check_*` columns. Reduces operator-visible "schema-change releases" from four to one.
+- **`internal/repository/postgres.RunSeed`** — runtime equivalent of the deleted initdb mount for `seed.sql`. Called from `cmd/server/main.go` immediately after `RunMigrations`. Idempotent (every INSERT in the shipped seed uses `ON CONFLICT (id) DO NOTHING`); missing-file is a no-op so operators with custom packaging that strips the seed don't break.
+- **`internal/repository/postgres.RunDemoSeed`** + **`config.DatabaseConfig.DemoSeed`** + **`CERTCTL_DEMO_SEED` env var.** Replaces the deleted `seed_demo.sql` initdb mount. The compose demo overlay sets `CERTCTL_DEMO_SEED=true` and the server applies the demo seed after baseline. Same idempotency contract as the baseline path. Default-off so a vanilla deploy never lands fake-history rows.
+- **`GET /api/v1/version` endpoint** + **`internal/api/handler.VersionHandler`**. Returns `{version, commit, modified, build_time, go_version}` from `runtime/debug.ReadBuildInfo()` with ldflags-supplied `Version` taking priority. Wired through the no-auth dispatch in `cmd/server/main.go` so probes and rollout systems can read build identity without Bearer credentials. Audit middleware excludes the path so rollout polls don't dominate the audit trail. Closes `cat-u-no_version_endpoint`.
+- **`notification_events.created_at` column** is now populated by `NotificationRepository.Create` (with a `time.Now()` fallback when the caller leaves it zero) and read back by `scanNotification`. Pre-U-3 the JSON API serialised `0001-01-01T00:00:00Z` — closes `cat-o-notification_created_at_dead_field`.
+- **Five regression tests** for the U-3 contract: `TestRunSeed_AppliesIdempotently`, `TestRunSeed_MissingFileIsNoOp`, `TestRunDemoSeed_AppliesIdempotently`, `TestMigration000017_RetryIntervalRename`, `TestMigration000017_NotificationCreatedAt`, `TestMigration000017_HealthCheckOrphansDropped`, plus `TestNotificationRepository_CreatedAt_IsPersisted` / `TestNotificationRepository_CreatedAt_DefaultsToNow` for the round-trip. All testcontainers-gated (skipped under `-short`). Three handler-layer unit tests pin `/api/v1/version` (`TestVersion_ReturnsBuildInfo`, `TestVersion_RejectsNonGet`, `TestVersion_LdflagsOverride`).
+- **CI regression guardrail** in `.github/workflows/ci.yml` (`Forbidden migration mount in compose initdb (U-3)`) — grep-fails the build if any `migrations/.*\.sql` or `seed.*\.sql` file is re-mounted into `/docker-entrypoint-initdb.d` in any compose file. Catches future drift before a fresh-clone operator hits it.
+
+### Changed
+
+- **`deploy/docker-compose.yml`** + **`deploy/docker-compose.test.yml`** — postgres `volumes:` no longer mount migrations or seed files; postgres healthcheck gains `start_period: 30s`; certctl-server healthcheck gains `start_period: 30s` to absorb the runtime migration + seed application window on first boot.
+- **`deploy/docker-compose.demo.yml`** — replaces the `seed_demo.sql` initdb mount with the `CERTCTL_DEMO_SEED=true` env var on `certctl-server`.
+- **`migrations/seed.sql`** — `INSERT INTO renewal_policies` updated to use the new `retry_interval_seconds` column name (lockstep with migration 000017).
+- **`internal/repository/postgres/renewal_policy.go`** — column references updated to `retry_interval_seconds` across SELECT, INSERT, and UPDATE sites (lockstep with migration 000017).
+
+### Closed audit findings
+
+- `cat-u-seed_initdb_schema_drift` (P1, primary U-3 finding)
+- `cat-o-retry_interval_unit_mismatch` (P1)
+- `cat-o-notification_created_at_dead_field` (P2)
+- `cat-o-health_check_column_orphans` (P1)
+- `cat-u-no_version_endpoint` (P2)
+
+### G-1: JWT silent auth downgrade — closed end-to-end
+
+> Pre-G-1 the config validator accepted `CERTCTL_AUTH_TYPE=jwt` and the startup log faithfully echoed `"authentication enabled" "type"="jwt"`. Reasonable people read that and concluded JWT was on. It wasn't. The auth-middleware wiring at `cmd/server/main.go` unconditionally routed every request through the api-key bearer middleware regardless of `cfg.Auth.Type`. So `CERTCTL_AUTH_TYPE=jwt` quietly compared incoming `Authorization: Bearer <something>` against whatever string the operator put in `CERTCTL_AUTH_SECRET` — real JWT clients got 401, and operators who treated `CERTCTL_AUTH_SECRET` as a *signing* secret (because they thought they were configuring JWT) had effectively handed an attacker an api-key. A security finding masquerading as a config option. We chose to remove the option rather than ship JWT middleware — the audit-recommended structural fix that closes the hazard. Operators who actually need JWT/OIDC front certctl with an authenticating gateway (oauth2-proxy / Envoy `ext_authz` / Traefik `ForwardAuth` / Pomerium / Authelia) and run the upstream certctl with `CERTCTL_AUTH_TYPE=none`. The same pattern works on docker-compose and Helm.
+
+### Breaking Changes
+
+- **`CERTCTL_AUTH_TYPE=jwt` is no longer accepted.** Pre-G-1 the value was silently downgraded to api-key middleware. Post-G-1 the server fails at startup with a dedicated diagnostic naming the authenticating-gateway pattern. Operators with this in their env block must either switch to `api-key` (if they were de facto using api-key auth all along — same Bearer token continues to work) or switch to `none` and front certctl with an oauth2-proxy / Envoy / Traefik / Pomerium gateway. See [`docs/upgrade-to-v2-jwt-removal.md`](docs/upgrade-to-v2-jwt-removal.md).
+- **Helm chart `server.auth.type=jwt` now fails at `helm install` / `helm upgrade` template time.** New `certctl.validateAuthType` template helper runs on every template that depends on `.Values.server.auth.type` (`server-deployment.yaml`, `server-configmap.yaml`, `server-secret.yaml`) and fails the render with a pointer at the gateway-fronting pattern.
+- **OpenAPI spec `auth_type` enum no longer includes `jwt`.** API consumers checking `/api/v1/auth/info` against the spec will see a smaller enum.
+
+### Removed
+
+- Documented references to JWT in the certctl auth surface (config docblocks, middleware/health-handler comments, `.env.example`, `docs/architecture.md` middleware-stack bullet). Connector-level JWT references (Google OAuth2 service-account JWT in `internal/connector/discovery/gcpsm/`, `internal/connector/issuer/googlecas/`; step-ca's provisioner one-time-token JWT in `internal/connector/issuer/stepca/`) are unrelated and untouched — those are external-protocol uses, not certctl's own auth shape.
+
+### Added
+
+- **`config.AuthType` typed alias** with `AuthTypeAPIKey` / `AuthTypeNone` exported constants. Single source of truth for the allowed set across the validator, the runtime defense-in-depth switch in `main.go`, and the helm chart's `validateAuthType` helper.
+- **`config.ValidAuthTypes()`** helper returning the complete allowed set; pinned by a property test (`TestValidAuthTypesDoesNotContainJWT`) that fails the build if `"jwt"` is ever re-added to the slice.
+- **Defense-in-depth runtime guard** in `cmd/server/main.go` immediately after `config.Load()` — a `switch config.AuthType(cfg.Auth.Type)` that exits 1 if the validator was bypassed (test harness, alt config loader, env-var rebinding).
+- **`certctl.validateAuthType` Helm template helper** mirroring the existing `certctl.tls.required` pattern. Fails template render on any `server.auth.type` outside `{api-key, none}`.
+- **`docs/architecture.md` "Authenticating-gateway pattern (JWT, OIDC, mTLS)"** section explaining the design rationale for the narrow in-process auth surface and listing oauth2-proxy / Envoy `ext_authz` / Traefik `ForwardAuth` / Pomerium / Authelia / Caddy `forward_auth` / Apache `mod_auth_openidc` / nginx `auth_request` as the standard fronting options.
+- **`docs/upgrade-to-v2-jwt-removal.md`** migration guide. Same shape as `docs/upgrade-to-tls.md`. Walks through the dedicated startup error, both recovery paths (`api-key` vs gateway-fronting), a complete docker-compose oauth2-proxy walkthrough, Traefik ForwardAuth and Envoy `ext_authz` patterns, and rollback posture.
+- **`deploy/helm/certctl/README.md`** "JWT / OIDC via authenticating gateway" section with a Kubernetes-flavored oauth2-proxy + certctl walkthrough.
+- **CI regression guardrail** in `.github/workflows/ci.yml` (`Forbidden auth-type literal regression guard (G-1)`) — grep-fails the build if `"jwt"` appears as an auth-type literal in production code or spec. Connector packages exempt (legitimate external-protocol uses).
+- **Negative test coverage** in `internal/config/config_test.go`: `TestValidate_JWTAuth_RejectedDedicated` (two table rows pinning that the dedicated G-1 error fires regardless of whether `Secret` is set), `TestValidAuthTypesDoesNotContainJWT` (property-level guard), `TestValidAuthTypesIsExactly_APIKey_None` (allowed-set contract), `TestValidate_GenericInvalidAuthType` (pins that other invalid values still surface the generic invalid-auth-type error, so the dedicated G-1 path doesn't accidentally swallow non-jwt typos).
+
+### Changed
+
+- `internal/api/middleware/middleware.go::AuthConfig.Type` field comment now references the typed `config.AuthType` constants instead of an inline string enumeration.
+- `internal/api/handler/health.go::HealthHandler.AuthType` field comment same treatment.
+- `internal/api/handler/health_test.go` — the prior `TestAuthInfo_ReturnsAuthType_JWT` (which asserted the handler echoed `"jwt"`, baking the silent-downgrade lie into the regression suite) is removed; the pre-existing `TestAuthInfo_ReturnsAuthType_APIKey` continues to cover the api-key happy path.
+- Auth-disabled startup log in `main.go` now points operators at the authenticating-gateway pattern explicitly.
+
+### U-2: Dockerfile HEALTHCHECK protocol mismatch — closed end-to-end
+
+> Pre-U-2 the published `ghcr.io/shankar0123/certctl-server` image shipped with `HEALTHCHECK CMD curl -f http://localhost:8443/health`. The server has been HTTPS-only since the v2.2 HTTPS-Everywhere milestone (`cmd/server/main.go::ListenAndServeTLS`, no plaintext fallback, TLS 1.3 pinned), so the probe failed every interval and Docker marked the container `unhealthy` indefinitely. Operators inside docker-compose / Helm / the example stacks were unaffected — compose overrides the HEALTHCHECK with `--cacert + https://`, Helm uses explicit `httpGet` probes that ignore Docker's HEALTHCHECK, and every example compose file overrides with `curl -sfk https://localhost:8443/health`. But anyone running bare `docker run` / Docker Swarm / Nomad / ECS — exactly the "I just pulled the published image" path — saw permanent `unhealthy` status and (depending on orchestrator policy) a restart-loop. Recon for U-2 also surfaced two adjacent bugs from the same v2.2 milestone gap: the Helm chart's `readinessProbe.httpGet.path` pointed at `/readyz`, a route the server doesn't register (only `/health` and `/ready` are wired and bypass the auth middleware), so K8s readiness probes were getting 404/auth-rejection and pods stayed `NotReady`; and the agent image had no HEALTHCHECK at all (the compose override called `pgrep -f certctl-agent` against an image that didn't ship `procps` — latent always-fail). All three are closed in this commit.
+
+### Fixed
+
+- **`Dockerfile` HEALTHCHECK now speaks HTTPS.** Bare `docker run` / Swarm / Nomad / ECS users no longer see `unhealthy` forever. The probe uses `curl -fsk https://localhost:8443/health` — `-k` (insecure) is acceptable because the probe is localhost-to-localhost: the same process serving the cert is being probed; the probe never traverses a network. Compose / Helm / examples already perform full cert-chain validation and are unaffected.
+- **Helm `server.readinessProbe.httpGet.path` corrected from `/readyz` to `/ready`.** The `/readyz` path was never registered as a no-auth route (see `internal/api/router/router.go:81` and `cmd/server/main.go:920`), so K8s readiness probes received 401 (api-key auth rejection) or 404 (when auth was disabled). Pods previously failed to report Ready under most realistic Helm deployments. Liveness probe path (`/health`) was already correct and is unchanged.
+- **`docs/connectors.md` curl examples** (15 sites) updated from `http://localhost:8443/...` to `https://localhost:8443/...` with a one-time `--cacert "$CA"` extraction note matching the existing pattern in `docs/quickstart.md`. Pre-U-2 these examples silently failed against the HTTPS listener.
+
+### Added
+
+- **`Dockerfile.agent` HEALTHCHECK** — `pgrep -f certctl-agent` process-presence check (the agent has no HTTP listener; presence is the right primitive). Bare-`docker run` agents now report health-status the same way compose-managed ones do. Also adds `procps` to the runtime image so `pgrep` is actually available — pre-U-2 the docker-compose override at `deploy/docker-compose.yml:173` called `pgrep -f certctl-agent` against an image that lacked it (latent always-fail; container was reported unhealthy in compose too, just rarely noticed because nothing acted on the signal).
+- **`deploy/test/healthcheck_test.go`** (`//go:build integration`) — image-level integration tests. `TestPublishedServerImage_HealthcheckSpecUsesHTTPS` builds the server image, inspects `Config.Healthcheck.Test` via `docker inspect`, and asserts the array contains `https://localhost:8443/health` and `-k`, and does NOT contain `http://localhost:8443/health` (negative regression contract). `TestPublishedAgentImage_HealthcheckSpecExists` builds the agent image and asserts the HEALTHCHECK uses `pgrep` against `certctl-agent`. Both tests `t.Skip` cleanly when docker isn't available (sandbox / CI without docker-in-docker). A third runtime test (`TestPublishedServerImage_HealthcheckTransitionsToHealthy`) is a `t.Skip` placeholder until the harness wires a sidecar postgres for image-level smoke — documented honestly so the next refactor adopts it instead of rediscovering the gap.
+- **CI regression guardrail** in `.github/workflows/ci.yml` (`Forbidden plaintext HEALTHCHECK regression guard (U-2)`) — grep-fails the build if any `Dockerfile*` carries `HEALTHCHECK.*http://` or `curl -f http://localhost:8443/health`. Comments exempt; the `docs/upgrade-to-tls.md:182` post-cutover invariant string (which deliberately documents the expected-failure shape) is out of the guardrail's scope because the guardrail only scans Dockerfiles.
+
+### Changed
+
+- `Dockerfile` final-stage HEALTHCHECK lines now carry a long-form docblock explaining the `-k` design choice, the published-image vs compose vs Helm vs examples coverage matrix, and cross-references to the audit closure + the integration test.
+- `Dockerfile.agent` runtime stage adds `procps` to the apk install so the new HEALTHCHECK and the existing compose override both have a working `pgrep`.
+- `deploy/helm/certctl/values.yaml` server probes block now carries an explanatory comment naming the registered probe routes (`/health`, `/ready`) and the U-2 closure rationale for the `/readyz` → `/ready` correction.
+
+## [2.2.0] — 2026-04-19
+
+### HTTPS Everywhere — The Irony
+
+> certctl manages other teams' certificates. Until v2.2, it didn't terminate TLS on its own control plane. We treated the server as an internal service sitting behind whatever TLS-terminating infrastructure the operator already owned — reverse proxies, Kubernetes Ingress controllers, service mesh sidecars. Working through an EST coverage-gap audit surfaced this as a credibility problem we wanted to fix head-on: a cert-lifecycle product should ship with HTTPS by default. This release flips that. Self-signed bootstrap for docker-compose demos, operator-supplied Secret for Helm (with optional cert-manager integration), and a one-step cutover with no backward-compat bridge. Out-of-date agents will fail at the TLS handshake layer on upgrade; the upgrade guide walks operators through the roll.
+
+### Breaking Changes
+
+- **HTTPS-only control plane. The plaintext HTTP listener is gone.** There is no `CERTCTL_TLS_ENABLED=false` escape hatch and no `:8080` fallback. Operators who were running certctl behind their own TLS terminator must either (a) continue doing so and let the downstream TLS terminator talk to certctl's HTTPS listener, or (b) bring their own cert/key and terminate on certctl directly. Either path requires config changes — see `docs/upgrade-to-tls.md` for a one-step cutover.
+- **Agents reject `CERTCTL_SERVER_URL=http://...` at startup.** This is a pre-flight config validation failure with a fail-loud diagnostic pointing at `docs/upgrade-to-tls.md`. Not a TCP-refused, not a TLS-handshake-error — the agent will not even attempt the network call. Every agent deployment must be reconfigured before upgrading the server.
+- **CLI and MCP clients require `https://` URLs.** Same pre-flight rejection of plaintext schemes.
+- **TLS 1.2 is not supported. TLS 1.3 only.** The server's `tls.Config.MinVersion` is pinned to `tls.VersionTLS13`. Any client still negotiating TLS 1.2 will fail at the handshake. Modern curl, Go stdlib, browsers, and Kubernetes tooling all default to 1.3-capable; legacy clients may need an upgrade.
+- **Helm chart requires a TLS source.** `helm install` without one of `server.tls.existingSecret`, `server.tls.certManager.enabled`, or (for eval only) `server.tls.selfSigned.enabled` fails at template time with a diagnostic pointing at `docs/tls.md`. There is no default-to-plaintext path.
+
+### Added
+
+- **Self-signed bootstrap for Docker Compose demos.** A `certctl-tls-init` init container runs before the server on first boot, generates a SAN-valid self-signed cert into `deploy/test/certs/`, and exits. The server mounts the resulting cert/key. Every curl in the demo stack pins against `./deploy/test/certs/ca.crt` with `--cacert`.
+- **Helm chart TLS provisioning — three modes.** Operator-supplied Secret (`server.tls.existingSecret`), cert-manager integration (`server.tls.certManager.enabled` with issuer selection), or self-signed (`server.tls.selfSigned.enabled` — eval only, not supported for production). Chart templates enforce exactly one is active.
+- **Hot-reload of TLS cert/key on `SIGHUP`.** Overwrite the cert/key on disk, send `SIGHUP` to the server PID, watch the `slog.Info("tls.reload", ...)` log line, and new TLS connections use the new cert. Failure during reload is logged and does not crash the server; the previous cert remains in use.
+- **Agent CA-bundle env vars.** `CERTCTL_SERVER_CA_BUNDLE_PATH` points at a PEM file the agent's HTTP client will trust. `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY` disables verification (development only — the agent logs a loud warning at startup). `install-agent.sh` writes both as commented template lines into the generated `agent.env`.
+- **Integration test suite runs over HTTPS.** `go test -tags=integration ./deploy/test/...` stands up the full Compose stack, extracts the self-signed CA bundle, and exercises every certctl API over `https://localhost:8443`. All 34 subtests green.
+- **`docs/tls.md`** — cert provisioning patterns: bring-your-own Secret, cert-manager, self-signed bootstrap, SAN requirements, rotation workflows, SIGHUP reload semantics, troubleshooting.
+- **`docs/upgrade-to-tls.md`** — one-step cutover guide for existing v2.1 operators. Walks through the agent fleet roll, Helm upgrade sequencing, downgrade-is-not-supported warnings, and cert-provisioning decision tree.
+
+### Changed
+
+- `cmd/server/main.go` now calls `http.Server.ListenAndServeTLS(certFile, keyFile)`. The plaintext `ListenAndServe` code path is deleted — `grep -rn "ListenAndServe[^T]" cmd/ internal/` returns zero hits.
+- All documentation curls (`docs/testing-guide.md`, `docs/quickstart.md`, `deploy/helm/INSTALLATION.md`, `deploy/helm/DEPLOYMENT_GUIDE.md`, `deploy/ENVIRONMENTS.md`, `docs/openapi.md`, migration guides, example READMEs) use `https://localhost:8443` and `--cacert` against the demo stack's bundle.
+- OpenAPI spec (`api/openapi.yaml`) `servers` blocks default to `https://localhost:8443`.
+
+### Security
+
+- TLS 1.3 pinned via `tls.Config.MinVersion = tls.VersionTLS13`.
+- Plaintext HTTP listener removed entirely — no port 8080, no `Upgrade-Insecure-Requests`, no HSTS-required redirect dance. There is only one port: 8443, TLS 1.3.
+- `grep -rn "http://" cmd/ internal/` returns zero hits outside test fixtures and the agent-side URL-scheme rejection error message.
+
+### Upgrade Notes
+
+Read `docs/upgrade-to-tls.md` before upgrading. The short version:
+
+1. Pick a TLS source — bring-your-own cert, cert-manager, or self-signed bootstrap.
+2. Upgrade the server with TLS configured. First boot over HTTPS.
+3. Roll the agent fleet: set `CERTCTL_SERVER_URL=https://...` and, if using a private CA, `CERTCTL_SERVER_CA_BUNDLE_PATH`. Old agents will fail loud at startup — expected.
+4. Roll CLI/MCP clients the same way.
+
+There is no backward-compat bridge. There is no dual-listener mode. The cutover is one step.

Dockerfile

@@ -76,7 +76,34 @@ USER certctl
 
 EXPOSE 8443
 
+# Image-level HEALTHCHECK for bare `docker run` / Docker Swarm / Nomad / ECS.
+#
+# U-2 (P1, cat-u-healthcheck_protocol_mismatch): pre-U-2 this probe used
+# `curl -f http://localhost:8443/health`, which always failed against the
+# HTTPS-only listener (HTTPS-Everywhere milestone, v2.2 / tag v2.0.47 —
+# `cmd/server/main.go::ListenAndServeTLS`, no plaintext fallback, TLS 1.3
+# pinned). Operators outside docker-compose / Helm saw permanent
+# `unhealthy` status and a restart-loop the first time they pulled the
+# image. The compose stack overrides this HEALTHCHECK with `--cacert` to
+# the bootstrap CA bundle (deploy/docker-compose.yml:126); the Helm chart
+# uses explicit `httpGet` probes with `scheme: HTTPS` and ignores Docker's
+# HEALTHCHECK; every example compose file in `examples/*/docker-compose.yml`
+# overrides with `curl -sfk https://localhost:8443/health`. This image-
+# level probe is for the bare-`docker run` consumer ONLY.
+#
+# `-k` (insecure) is acceptable here because the probe is localhost-to-
+# localhost: the same process serving the cert is being probed; the probe
+# never traverses a network. Pinning a `--cacert` is not viable for the
+# published image because the bootstrap cert is per-deploy (generated into
+# the `certs` named volume on first up; operator-supplied via Helm's
+# `existingSecret` or cert-manager). Compose / Helm / examples already
+# perform full cert-chain validation and are unaffected.
+#
+# CI grep guardrail at .github/workflows/ci.yml ("Forbidden plaintext
+# HEALTHCHECK regression guard (U-2)") blocks reintroduction of the
+# `http://` shape. Image-level integration test in
+# deploy/test/healthcheck_test.go pins the contract end-to-end.
 HEALTHCHECK --interval=10s --timeout=5s --start-period=5s --retries=5 \
-    CMD curl -f http://localhost:8443/health || exit 1
+    CMD curl -fsk https://localhost:8443/health || exit 1
 
 ENTRYPOINT ["/app/server"]

Dockerfile.agent

@@ -36,7 +36,14 @@ RUN CGO_ENABLED=0 GOOS=linux GOARCH=${TARGETARCH} go build \
 # Stage 2: Runtime
 FROM alpine:3.19
 
-RUN apk add --no-cache ca-certificates curl
+# U-2: `procps` ships pgrep, which the HEALTHCHECK below uses to verify the
+# agent process is alive. Pre-U-2 the deploy/docker-compose.yml agent
+# HEALTHCHECK called `pgrep -f certctl-agent` against this image but
+# pgrep wasn't installed — the compose probe was a latent always-fail.
+# Adding procps here fixes both the new image-level HEALTHCHECK and the
+# pre-existing compose override. Adds ~250KB to the image; acceptable for
+# observability parity with the server image.
+RUN apk add --no-cache ca-certificates curl procps
 
 RUN addgroup -g 1000 certctl && \
     adduser -D -u 1000 -G certctl certctl
@@ -51,4 +58,19 @@ RUN mkdir -p /var/lib/certctl/keys && \
 
 USER certctl
 
+# Image-level HEALTHCHECK for bare `docker run` / Docker Swarm / Nomad / ECS.
+#
+# U-2 (P1, cat-u-healthcheck_protocol_mismatch — adjacent fix): the agent
+# has no HTTP listener (it polls the server via outbound HTTPS), so a
+# process-presence check is the correct primitive. Pre-U-2 the agent image
+# shipped with no HEALTHCHECK at all, so bare-`docker run` operators got
+# zero health signal and orchestrators that key off Docker's HEALTHCHECK
+# (Swarm, Nomad, ECS) saw the container reported as `none`. The compose
+# override at deploy/docker-compose.yml:173 used the same `pgrep -f
+# certctl-agent` shape; we mirror it here so the published image has
+# parity with the compose stack and the override on docker-compose.yml
+# becomes redundant-but-correct rather than load-bearing.
+HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
+    CMD pgrep -f certctl-agent > /dev/null || exit 1
+
 ENTRYPOINT ["/app/agent"]

README.md

@@ -197,7 +197,7 @@ cd certctl
 docker compose -f deploy/docker-compose.yml up -d --build
 ```
 
-Wait ~30 seconds, then open **http://localhost:8443** in your browser. The onboarding wizard walks you through connecting a CA, deploying an agent, and issuing your first certificate.
+Wait ~30 seconds, then open **https://localhost:8443** in your browser. (The shipped `docker-compose.yml` self-signs a cert via the `certctl-tls-init` init container on first boot — accept the browser warning for the demo, or feed the generated `ca.crt` to your client.) The onboarding wizard walks you through connecting a CA, deploying an agent, and issuing your first certificate.
 
 **Want a pre-populated demo instead?** Add the demo override to see 32 certificates across 10 issuers, 8 agents, and 180 days of realistic history:
 
@@ -208,10 +208,12 @@ docker compose -f deploy/docker-compose.yml -f deploy/docker-compose.demo.yml up
 The `deploy/` directory has four compose files: `docker-compose.yml` (base platform), `docker-compose.demo.yml` (demo data overlay), `docker-compose.dev.yml` (PgAdmin + debug logging), and `docker-compose.test.yml` (standalone integration tests with real CA backends). See the [Docker Compose Environments Guide](deploy/ENVIRONMENTS.md) for a service-by-service walkthrough, or the [Quick Start](docs/quickstart.md#docker-compose-environments) for a summary.
 
 ```bash
-curl http://localhost:8443/health
+curl --cacert $(docker compose -f deploy/docker-compose.yml exec -T certctl-server cat /etc/certctl/tls/ca.crt) https://localhost:8443/health
 # {"status":"healthy"}
 ```
 
+The control plane is HTTPS-only (TLS 1.3, no plaintext listener). See [`docs/tls.md`](docs/tls.md) for cert provisioning patterns and [`docs/upgrade-to-tls.md`](docs/upgrade-to-tls.md) if you're upgrading from a pre-v2.2 release.
+
 ### Agent Install (One-Liner)
 
 ```bash
@@ -260,15 +262,17 @@ sha256sum -c checksums.txt
 
 ```bash
 cosign verify-blob \
-  --certificate checksums.txt.pem \
-  --signature checksums.txt.sig \
+  --bundle checksums.txt.sigstore.json \
   --certificate-identity-regexp '^https://github\.com/shankar0123/certctl/\.github/workflows/release\.yml@refs/tags/' \
   --certificate-oidc-issuer 'https://token.actions.githubusercontent.com' \
   checksums.txt
 ```
 
-Every individual binary has its own `.sig` + `.pem` sidecar; swap
-`checksums.txt` for any binary name to verify it directly.
+Every individual binary ships with its own `.sigstore.json` bundle
+(unified Sigstore bundle containing signature, certificate chain, and
+Rekor inclusion proof). Swap `checksums.txt` for any binary name and
+point `--bundle` at the matching `<binary>.sigstore.json` to verify it
+directly.
 
 **3. Verify SLSA Level 3 provenance on a binary:**
 
@@ -324,8 +328,9 @@ Each directory contains a `docker-compose.yml` and a `README.md` explaining the
 go install github.com/shankar0123/certctl/cmd/cli@latest
 
 # Configure
-export CERTCTL_SERVER_URL=http://localhost:8443
+export CERTCTL_SERVER_URL=https://localhost:8443
 export CERTCTL_API_KEY=your-api-key
+export CERTCTL_SERVER_CA_BUNDLE_PATH=/path/to/ca.crt   # or --ca-bundle on the CLI; --insecure for dev self-signed
 
 # Usage
 certctl-cli certs list                    # List all certificates
@@ -345,11 +350,14 @@ certctl ships a standalone MCP (Model Context Protocol) server that exposes all
 ```bash
 # Install and run
 go install github.com/shankar0123/certctl/cmd/mcp-server@latest
-export CERTCTL_SERVER_URL=http://localhost:8443
+export CERTCTL_SERVER_URL=https://localhost:8443
 export CERTCTL_API_KEY=your-api-key
+export CERTCTL_SERVER_CA_BUNDLE_PATH=/path/to/ca.crt   # required for self-signed bootstrap
 mcp-server
 ```
 
+The MCP server is env-vars-only — there are no CLI flags for TLS. If you must bypass verification for local development against a self-signed cert, set `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true`. Never set that in production.
+
 **Claude Desktop** (`claude_desktop_config.json`):
 ```json
 {
@@ -357,8 +365,9 @@ mcp-server
     "certctl": {
       "command": "mcp-server",
       "env": {
-        "CERTCTL_SERVER_URL": "http://localhost:8443",
-        "CERTCTL_API_KEY": "your-api-key"
+        "CERTCTL_SERVER_URL": "https://localhost:8443",
+        "CERTCTL_API_KEY": "your-api-key",
+        "CERTCTL_SERVER_CA_BUNDLE_PATH": "/path/to/ca.crt"
       }
     }
   }

api/openapi.yaml

@@ -17,10 +17,8 @@ info:
     url: https://github.com/shankar0123/certctl/blob/master/LICENSE
 
 servers:
-  - url: http://localhost:8080
-    description: Local development
-  - url: http://localhost:8443
-    description: Docker Compose demo
+  - url: https://localhost:8443
+    description: Docker Compose demo (self-signed cert; pin with ./deploy/test/certs/ca.crt)
 
 security:
   - bearerAuth: []
@@ -29,7 +27,11 @@ tags:
   - name: Certificates
     description: Certificate lifecycle — CRUD, versions, renewal, deployment, revocation
   - name: CRL & OCSP
-    description: Certificate revocation list and OCSP responder
+    description: |
+      Certificate revocation list (RFC 5280) and OCSP responder (RFC 6960).
+      Served unauthenticated under `/.well-known/pki/*` (RFC 8615) so
+      relying parties can retrieve revocation status without a certctl
+      API key.
   - name: Issuers
     description: CA issuer connector management (Local CA, ACME, step-ca)
   - name: Targets
@@ -40,6 +42,8 @@ tags:
     description: Job queue — issuance, renewal, deployment, validation
   - name: Policies
     description: Policy rules and violation tracking
+  - name: RenewalPolicies
+    description: Lifecycle renewal policies (distinct from compliance policy rules above)
   - name: Profiles
     description: Certificate enrollment profiles with crypto constraints
   - name: Teams
@@ -128,7 +132,14 @@ paths:
                 properties:
                   auth_type:
                     type: string
-                    enum: [api-key, jwt, none]
+                    # G-1 (P1): "jwt" removed from this enum after the silent
+                    # auth downgrade was identified — no JWT middleware ships
+                    # with certctl. Operators who need JWT/OIDC front certctl
+                    # with an authenticating gateway (oauth2-proxy / Envoy /
+                    # Traefik / Pomerium) and set CERTCTL_AUTH_TYPE=none
+                    # upstream. See docs/architecture.md "Authenticating-
+                    # gateway pattern".
+                    enum: [api-key, none]
                   required:
                     type: boolean
 
@@ -152,6 +163,50 @@ paths:
         "401":
           description: Unauthorized
 
+  /api/v1/version:
+    get:
+      tags: [Health]
+      summary: Build identity (version, commit, Go runtime)
+      description: |
+        Returns the running server's build identity. Served without
+        auth so rollout systems and blackbox probes can read it without
+        Bearer credentials. U-3 ride-along (cat-u-no_version_endpoint).
+        Excluded from audit logging because rollout polling would
+        otherwise dominate the audit trail.
+
+        The Version field follows a fallback ladder: ldflags-supplied
+        value > VCS commit SHA > "dev". Commit / Modified / BuildTime
+        come from runtime/debug.BuildInfo (Go 1.18+ stamps these on
+        every module-tracked build). GoVersion is runtime.Version().
+      security: []
+      operationId: getVersion
+      responses:
+        "200":
+          description: Build identity
+          content:
+            application/json:
+              schema:
+                type: object
+                required: [version, commit, modified, build_time, go_version]
+                properties:
+                  version:
+                    type: string
+                    description: Release tag (ldflags-supplied) or VCS SHA fallback or "dev"
+                    example: v2.0.51
+                  commit:
+                    type: string
+                    description: Git SHA from runtime/debug.BuildInfo (vcs.revision); empty when not VCS-tracked
+                  modified:
+                    type: boolean
+                    description: True when build had uncommitted changes (vcs.modified)
+                  build_time:
+                    type: string
+                    description: RFC 3339 build timestamp (vcs.time); empty when not VCS-tracked
+                  go_version:
+                    type: string
+                    description: Go toolchain version that compiled the binary (runtime.Version())
+                    example: go1.25.9
+
   # ─── Certificates ────────────────────────────────────────────────────
   /api/v1/certificates:
     get:
@@ -493,50 +548,28 @@ paths:
         "500":
           $ref: "#/components/responses/InternalError"
 
-  # ─── CRL & OCSP ─────────────────────────────────────────────────────
-  /api/v1/crl:
+  # ─── PKI (CRL & OCSP, RFC 5280 / 6960 / 8615) ──────────────────────
+  #
+  # Relying parties (browsers, OpenSSL clients, OCSP stapling sidecars,
+  # mTLS clients) cannot present a certctl Bearer token, so these two
+  # endpoints are unauthenticated and live under the RFC 8615
+  # `.well-known` namespace. They were previously mounted at
+  # /api/v1/crl/{issuer_id} and /api/v1/ocsp/{issuer_id}/{serial}; those
+  # paths were removed in M-006.
+  #
+  # The non-standard JSON CRL endpoint (GET /api/v1/crl) was also
+  # removed — RFC 5280 defines only the DER wire format.
+  /.well-known/pki/crl/{issuer_id}:
     get:
       tags: [CRL & OCSP]
-      summary: Get JSON CRL
-      description: Returns all revoked certificates in JSON format.
-      operationId: getCRL
-      responses:
-        "200":
-          description: JSON CRL
-          content:
-            application/json:
-              schema:
-                type: object
-                properties:
-                  version:
-                    type: integer
-                    example: 1
-                  entries:
-                    type: array
-                    items:
-                      type: object
-                      properties:
-                        serial_number:
-                          type: string
-                        revocation_date:
-                          type: string
-                          format: date-time
-                        revocation_reason:
-                          type: string
-                  total:
-                    type: integer
-                  generated_at:
-                    type: string
-                    format: date-time
-        "500":
-          $ref: "#/components/responses/InternalError"
-
-  /api/v1/crl/{issuer_id}:
-    get:
-      tags: [CRL & OCSP]
-      summary: Get DER-encoded X.509 CRL
-      description: Returns a proper DER-encoded CRL signed by the issuing CA. 24-hour validity.
+      summary: Get DER-encoded X.509 CRL (RFC 5280)
+      description: |
+        Returns a DER-encoded CRL signed by the issuing CA (RFC 5280 §5),
+        served unauthenticated per RFC 8615 `.well-known` semantics so
+        relying parties can retrieve it without a certctl API key.
+        Validity is 24 hours.
       operationId: getDERCRL
+      security: []
       parameters:
         - name: issuer_id
           in: path
@@ -560,12 +593,17 @@ paths:
         "501":
           description: Issuer does not support CRL generation
 
-  /api/v1/ocsp/{issuer_id}/{serial}:
+  /.well-known/pki/ocsp/{issuer_id}/{serial}:
     get:
       tags: [CRL & OCSP]
-      summary: OCSP responder
-      description: Returns signed OCSP response (good/revoked/unknown) for the given serial number.
+      summary: OCSP responder (RFC 6960)
+      description: |
+        Returns a signed OCSP response (good/revoked/unknown) for the
+        given serial number per RFC 6960 §2.1, served unauthenticated
+        per RFC 8615 so relying parties and OCSP stapling sidecars can
+        query revocation status without a certctl API key.
       operationId: handleOCSP
+      security: []
       parameters:
         - name: issuer_id
           in: path
@@ -893,6 +931,40 @@ paths:
         "500":
           $ref: "#/components/responses/InternalError"
 
+  /api/v1/agents/retired:
+    get:
+      tags: [Agents]
+      summary: List retired agents
+      description: |
+        I-004: opt-in listing of soft-retired agents. The default
+        `GET /api/v1/agents` endpoint filters retired rows out; this is the
+        dedicated surface for reading them back (e.g., the operator UI's
+        "Retired" tab, audit and forensics workflows). Pagination defaults
+        match the default agent listing (page=1, per_page=50, max 500). Go
+        1.22's enhanced ServeMux routes `/agents/retired` to this handler
+        via the literal-beats-pattern-var precedence rule, so the sibling
+        `/agents/{id}` route does not shadow it.
+      operationId: listRetiredAgents
+      parameters:
+        - $ref: "#/components/parameters/page"
+        - $ref: "#/components/parameters/per_page"
+      responses:
+        "200":
+          description: Paginated list of retired agents
+          content:
+            application/json:
+              schema:
+                allOf:
+                  - $ref: "#/components/schemas/PaginationEnvelope"
+                  - type: object
+                    properties:
+                      data:
+                        type: array
+                        items:
+                          $ref: "#/components/schemas/Agent"
+        "500":
+          $ref: "#/components/responses/InternalError"
+
   /api/v1/agents/{id}:
     get:
       tags: [Agents]
@@ -913,12 +985,116 @@ paths:
           $ref: "#/components/responses/NotFound"
         "500":
           $ref: "#/components/responses/InternalError"
+    delete:
+      tags: [Agents]
+      summary: Soft-retire agent
+      description: |
+        I-004: soft-retirement. The agent row is preserved (so its audit
+        trail and historical job links remain intact) and `retired_at` is
+        stamped. A retired agent receives `410 Gone` on subsequent
+        heartbeats so it can shut down cleanly.
+
+        Behavior matrix:
+
+        | Scenario | Query | Status | Body |
+        | --- | --- | --- | --- |
+        | Clean retire (no active dependencies) | none | `200` | `RetireAgentResponse` with `cascade=false`, zero counts |
+        | Blocked by active targets/certs/jobs | none | `409` | `BlockedByDependenciesResponse` with per-bucket counts |
+        | Force-cascade retire | `force=true&reason=...` | `200` | `RetireAgentResponse` with `cascade=true`, pre-cascade counts |
+        | Idempotent re-retire | either | `204` | (empty — downstream consumers break on stray bodies) |
+        | `force=true` without reason | `force=true` | `400` | ErrorResponse (ErrForceReasonRequired) |
+        | Reserved sentinel agent | any | `403` | ErrorResponse (ErrAgentIsSentinel) |
+        | Unknown agent id | any | `404` | ErrorResponse |
+
+        Sentinel agents are the four reserved identities backing non-agent
+        discovery subsystems (`server-scanner`, `cloud-aws-sm`,
+        `cloud-azure-kv`, `cloud-gcp-sm`). Retiring them would orphan the
+        scanner or a cloud secret-manager source, so the handler refuses
+        unconditionally — even with `force=true`.
+      operationId: retireAgent
+      parameters:
+        - $ref: "#/components/parameters/resourceId"
+        - name: force
+          in: query
+          required: false
+          schema:
+            type: boolean
+            default: false
+          description: |
+            Cascade-retire active downstream targets, certificates, and
+            jobs. When `true`, a non-empty `reason` is required. A
+            malformed value (anything strconv.ParseBool rejects) is
+            silently treated as `false` so a typoed query can never
+            accidentally enable the cascade.
+        - name: reason
+          in: query
+          required: false
+          schema:
+            type: string
+          description: |
+            Human-readable reason recorded on the retired row and in the
+            immutable audit trail. Required (non-empty after trimming)
+            when `force=true`.
+      responses:
+        "200":
+          description: |
+            Agent retired (clean retire or successful force-cascade). Body
+            is `RetireAgentResponse`.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/RetireAgentResponse"
+        "204":
+          description: |
+            Idempotent retire — the agent was already retired. Response
+            body is empty (the 200-path shape does not apply, and
+            downstream clients that tee responses into dashboards would
+            break on spurious bodies).
+        "400":
+          description: |
+            `force=true` was sent without a non-empty `reason`
+            (ErrForceReasonRequired).
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ErrorResponse"
+        "403":
+          description: |
+            Agent is a reserved sentinel and cannot be retired even with
+            `?force=true` (ErrAgentIsSentinel).
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ErrorResponse"
+        "404":
+          $ref: "#/components/responses/NotFound"
+        "409":
+          description: |
+            Blocked by active downstream dependencies. Body carries
+            per-bucket counts so the operator UI can show the user which
+            dependency is holding up the retire. Re-run with
+            `?force=true&reason=...` to cascade.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/BlockedByDependenciesResponse"
+        "405":
+          description: Method not allowed (only DELETE, GET are routed to this path)
+        "500":
+          $ref: "#/components/responses/InternalError"
 
   /api/v1/agents/{id}/heartbeat:
     post:
       tags: [Agents]
       summary: Agent heartbeat
-      description: Reports agent liveness and metadata (OS, architecture, IP, version).
+      description: |
+        Reports agent liveness and metadata (OS, architecture, IP, version).
+
+        I-004: a retired agent still polling the heartbeat endpoint receives
+        `410 Gone` so `cmd/agent` detects the terminal signal and shuts down
+        cleanly instead of looping forever against a decommissioned identity.
+        The retired-agent check runs before any "not found" string match so
+        it can never be masked by a sibling error branch.
       operationId: agentHeartbeat
       parameters:
         - $ref: "#/components/parameters/resourceId"
@@ -949,6 +1125,14 @@ paths:
           $ref: "#/components/responses/BadRequest"
         "404":
           $ref: "#/components/responses/NotFound"
+        "410":
+          description: |
+            I-004: the agent has been soft-retired. The agent process should
+            treat this as a terminal signal and shut down cleanly.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ErrorResponse"
         "500":
           $ref: "#/components/responses/InternalError"
 
@@ -1397,6 +1581,137 @@ paths:
         "500":
           $ref: "#/components/responses/InternalError"
 
+  # ─── Renewal Policies ────────────────────────────────────────────────
+  # G-1: lifecycle policies (rp-* ids, table renewal_policies). DISTINCT from
+  # /api/v1/policies above, which returns compliance rules (pol-* ids, table
+  # policy_rules). `managed_certificates.renewal_policy_id` FK points at
+  # renewal_policies(id) — populating that dropdown from /api/v1/policies
+  # caused 23503 FK violations; hence this endpoint.
+  /api/v1/renewal-policies:
+    get:
+      tags: [RenewalPolicies]
+      summary: List renewal policies
+      operationId: listRenewalPolicies
+      parameters:
+        - $ref: "#/components/parameters/page"
+        - $ref: "#/components/parameters/per_page"
+      responses:
+        "200":
+          description: Paginated list of renewal policies
+          content:
+            application/json:
+              schema:
+                allOf:
+                  - $ref: "#/components/schemas/PaginationEnvelope"
+                  - type: object
+                    properties:
+                      data:
+                        type: array
+                        items:
+                          $ref: "#/components/schemas/RenewalPolicy"
+        "500":
+          $ref: "#/components/responses/InternalError"
+    post:
+      tags: [RenewalPolicies]
+      summary: Create renewal policy
+      operationId: createRenewalPolicy
+      requestBody:
+        required: true
+        content:
+          application/json:
+            schema:
+              $ref: "#/components/schemas/RenewalPolicyCreateRequest"
+      responses:
+        "201":
+          description: Renewal policy created
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/RenewalPolicy"
+        "400":
+          $ref: "#/components/responses/BadRequest"
+        "409":
+          description: Duplicate policy name
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/Error"
+        "500":
+          $ref: "#/components/responses/InternalError"
+
+  /api/v1/renewal-policies/{id}:
+    get:
+      tags: [RenewalPolicies]
+      summary: Get renewal policy
+      operationId: getRenewalPolicy
+      parameters:
+        - $ref: "#/components/parameters/resourceId"
+      responses:
+        "200":
+          description: Renewal policy details
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/RenewalPolicy"
+        "400":
+          $ref: "#/components/responses/BadRequest"
+        "404":
+          $ref: "#/components/responses/NotFound"
+        "500":
+          $ref: "#/components/responses/InternalError"
+    put:
+      tags: [RenewalPolicies]
+      summary: Update renewal policy
+      operationId: updateRenewalPolicy
+      parameters:
+        - $ref: "#/components/parameters/resourceId"
+      requestBody:
+        required: true
+        content:
+          application/json:
+            schema:
+              $ref: "#/components/schemas/RenewalPolicyUpdateRequest"
+      responses:
+        "200":
+          description: Renewal policy updated
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/RenewalPolicy"
+        "400":
+          $ref: "#/components/responses/BadRequest"
+        "404":
+          $ref: "#/components/responses/NotFound"
+        "409":
+          description: Duplicate policy name
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/Error"
+        "500":
+          $ref: "#/components/responses/InternalError"
+    delete:
+      tags: [RenewalPolicies]
+      summary: Delete renewal policy
+      operationId: deleteRenewalPolicy
+      parameters:
+        - $ref: "#/components/parameters/resourceId"
+      responses:
+        "204":
+          description: Renewal policy deleted
+        "400":
+          $ref: "#/components/responses/BadRequest"
+        "404":
+          $ref: "#/components/responses/NotFound"
+        "409":
+          description: Policy in use by one or more certificates (FK restrict)
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/Error"
+        "500":
+          $ref: "#/components/responses/InternalError"
+
   # ─── Profiles ────────────────────────────────────────────────────────
   /api/v1/profiles:
     get:
@@ -1904,6 +2219,16 @@ paths:
       parameters:
         - $ref: "#/components/parameters/page"
         - $ref: "#/components/parameters/per_page"
+        - name: status
+          in: query
+          required: false
+          description: |
+            Filter by lifecycle status. I-005: `dead` powers the Dead letter
+            tab on the GUI; empty/omitted returns the default all-statuses
+            listing to preserve pre-I-005 behavior.
+          schema:
+            type: string
+            enum: [pending, sent, failed, dead, read]
       responses:
         "200":
           description: Paginated list of notifications
@@ -1961,6 +2286,36 @@ paths:
         "500":
           $ref: "#/components/responses/InternalError"
 
+  /api/v1/notifications/{id}/requeue:
+    post:
+      tags: [Notifications]
+      summary: Requeue a dead notification
+      description: |
+        I-005: flip a notification from the `dead` dead-letter queue back to
+        `pending` so the retry sweep (default 2 minutes) picks it up on its
+        next tick. Used by operators after fixing the underlying delivery
+        failure (SMTP config, webhook endpoint, etc.). Clears `next_retry_at`
+        and resets the `retry_count` budget; `last_error` is preserved for
+        audit continuity.
+      operationId: requeueNotification
+      parameters:
+        - $ref: "#/components/parameters/resourceId"
+      responses:
+        "200":
+          description: Requeued
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/StatusResponse"
+        "400":
+          $ref: "#/components/responses/BadRequest"
+        "404":
+          $ref: "#/components/responses/NotFound"
+        "405":
+          description: Method not allowed (POST only)
+        "500":
+          $ref: "#/components/responses/InternalError"
+
   # ─── Stats ───────────────────────────────────────────────────────────
   /api/v1/stats/summary:
     get:
@@ -3137,6 +3492,15 @@ components:
         - Archived
 
     ManagedCertificate:
+      # D-5 (cat-f-ae0d06b6588f, master): per-issuance fields
+      # (serial_number, fingerprint_sha256, key_algorithm, key_size,
+      # issued_at) are intentionally NOT declared here. They live on
+      # CertificateVersion (per-issuance evidence) and are fetched via
+      # /api/v1/certificates/{id}/versions. ManagedCertificate is the
+      # management envelope; CertificateVersion is the issuance record.
+      # Pre-D-5 the TS Certificate interface had them as optional and
+      # the dashboard's Key Algorithm / Key Size rows always rendered
+      # '—' as a result. The TS trim restores parity with this schema.
       type: object
       properties:
         id:
@@ -3326,6 +3690,7 @@ components:
 
     DeploymentTarget:
       type: object
+      required: [name, type, agent_id]
       properties:
         id:
           type: string
@@ -3335,6 +3700,12 @@ components:
           $ref: "#/components/schemas/TargetType"
         agent_id:
           type: string
+          description: |
+            ID of the agent that manages this target. Required because
+            deployment_targets.agent_id is a NOT NULL foreign key to agents(id)
+            (migration 000001). Empty or nonexistent agent IDs are rejected
+            with HTTP 400 by the service layer (see C-002 in the coverage-gap
+            audit).
         config:
           type: object
           description: Target-specific configuration (varies by type)
@@ -3369,8 +3740,18 @@ components:
         registered_at:
           type: string
           format: date-time
-        api_key_hash:
-          type: string
+        # G-2 (P1): the `api_key_hash` field was REMOVED from this
+        # schema after cat-s5-apikey_leak audit closure. The DB column
+        # still exists (migrations/000001_initial_schema.up.sql) and
+        # the server still populates the in-memory struct for the
+        # auth-lookup path (repository.AgentRepository::GetByAPIKey),
+        # but the JSON wire shape no longer carries it — see
+        # internal/domain/connector.go::Agent::APIKeyHash + MarshalJSON
+        # for the redaction enforcement and docs/architecture.md ER
+        # diagram for the database-vs-API distinction. Do NOT re-add
+        # the field here without first removing the JSON-shape redaction
+        # in the domain package; the CI guardrail at
+        # .github/workflows/ci.yml will block re-introduction either way.
         os:
           type: string
         architecture:
@@ -3379,6 +3760,85 @@ components:
           type: string
         version:
           type: string
+        retired_at:
+          type: string
+          format: date-time
+          nullable: true
+          description: |
+            I-004: soft-retirement timestamp. `null` (or field absent) means the
+            agent is active. A non-null value is the canonical "retired" state —
+            the operational `status` column is preserved at retirement time as
+            the last-seen value, but `retired_at` is the source of truth for
+            filtering agents out of active listings.
+        retired_reason:
+          type: string
+          nullable: true
+          description: |
+            I-004: human-readable reason captured at retirement time. Only set
+            when the agent was retired via `?force=true&reason=...` cascade; a
+            default soft-retire leaves this field null.
+
+    AgentDependencyCounts:
+      type: object
+      description: |
+        I-004: preflight counts of active downstream rows that would be
+        orphaned by retiring an agent. Returned in the 409
+        `blocked_by_dependencies` body so the operator UI can tell the user
+        which bucket is blocking the retire, and also in the 200 response
+        body on a successful `?force=true` cascade as a snapshot of what
+        was cascaded.
+      properties:
+        active_targets:
+          type: integer
+          description: Deployment targets with this agent assigned and retired_at IS NULL
+        active_certificates:
+          type: integer
+          description: Certificates currently deployed via one of this agent's active targets
+        pending_jobs:
+          type: integer
+          description: Jobs with agent_id=this in status Pending, AwaitingCSR, AwaitingApproval, or Running
+
+    RetireAgentResponse:
+      type: object
+      description: |
+        I-004: response body for a successful retire on DELETE /api/v1/agents/{id}.
+        Returned on both clean retires (cascade=false, zero counts) and
+        force-cascade retires (cascade=true, counts snapshot of the
+        pre-cascade dependency state). The 204 idempotent-retire path does
+        NOT emit this body — re-retiring an already-retired agent returns
+        an empty response.
+      properties:
+        retired_at:
+          type: string
+          format: date-time
+        already_retired:
+          type: boolean
+          description: |
+            Always false on the 200 response — the already-retired path
+            returns 204 No Content with no body. Surfaced in the schema
+            only so downstream consumers have a complete field map.
+        cascade:
+          type: boolean
+          description: True when the retire was invoked with ?force=true
+        counts:
+          $ref: "#/components/schemas/AgentDependencyCounts"
+
+    BlockedByDependenciesResponse:
+      type: object
+      description: |
+        I-004: 409 response body for a retire request blocked by active
+        downstream dependencies. Returned when `force=true` is not set and
+        any of the three counts is non-zero. The operator UI renders these
+        counts so the human can retire or reassign the blocking rows
+        before re-running the retire, or tick the force checkbox to cascade.
+      properties:
+        error:
+          type: string
+          example: blocked_by_dependencies
+        message:
+          type: string
+        counts:
+          $ref: "#/components/schemas/AgentDependencyCounts"
 
     WorkItem:
       type: object
@@ -3461,6 +3921,7 @@ components:
         - RequiredMetadata
         - AllowedEnvironments
         - RenewalLeadTime
+        - CertificateLifetime
 
     PolicySeverity:
       type: string
@@ -3480,6 +3941,9 @@ components:
           description: Policy-specific configuration (varies by type)
         enabled:
           type: boolean
+        severity:
+          $ref: "#/components/schemas/PolicySeverity"
+          description: Severity level applied to violations of this rule. Defaults to Warning on create when omitted.
         created_at:
           type: string
           format: date-time
@@ -3504,6 +3968,132 @@ components:
           type: string
           format: date-time
 
+    # ─── Renewal Policies ─────────────────────────────────────────────
+    # G-1: renewal_policies table — lifecycle policies, referenced by
+    # managed_certificates.renewal_policy_id ON DELETE RESTRICT. Distinct
+    # from PolicyRule above (compliance rules, table policy_rules).
+    RenewalPolicy:
+      type: object
+      required:
+        - id
+        - name
+        - renewal_window_days
+        - auto_renew
+        - max_retries
+        - retry_interval_seconds
+        - alert_thresholds_days
+        - created_at
+        - updated_at
+      properties:
+        id:
+          type: string
+          description: Human-readable ID, prefixed `rp-` (e.g., `rp-default`).
+        name:
+          type: string
+          description: Unique display name (UNIQUE in DB).
+        renewal_window_days:
+          type: integer
+          minimum: 1
+          maximum: 365
+          description: Days before expiry to trigger renewal.
+        auto_renew:
+          type: boolean
+          description: Whether renewal is triggered automatically by the scheduler.
+        max_retries:
+          type: integer
+          minimum: 0
+          maximum: 10
+          description: Maximum renewal retry attempts on failure.
+        retry_interval_seconds:
+          type: integer
+          minimum: 60
+          maximum: 86400
+          description: Seconds to wait between retry attempts.
+        alert_thresholds_days:
+          type: array
+          items:
+            type: integer
+            minimum: 0
+            maximum: 365
+          description: Days-before-expiry thresholds at which to emit alerts.
+        certificate_profile_id:
+          type: string
+          nullable: true
+          description: Optional certificate profile binding. Read-only at this endpoint; UI does not currently edit this field.
+        created_at:
+          type: string
+          format: date-time
+        updated_at:
+          type: string
+          format: date-time
+
+    RenewalPolicyCreateRequest:
+      type: object
+      required:
+        - name
+      properties:
+        id:
+          type: string
+          description: Optional human-readable ID. Auto-generated from name when omitted.
+        name:
+          type: string
+          minLength: 1
+          maxLength: 255
+        renewal_window_days:
+          type: integer
+          minimum: 1
+          maximum: 365
+          default: 30
+        auto_renew:
+          type: boolean
+          default: true
+        max_retries:
+          type: integer
+          minimum: 0
+          maximum: 10
+          description: Required. Not defaulted — 0 is a valid operator choice.
+        retry_interval_seconds:
+          type: integer
+          minimum: 60
+          maximum: 86400
+          default: 3600
+        alert_thresholds_days:
+          type: array
+          items:
+            type: integer
+            minimum: 0
+            maximum: 365
+          default: [30, 14, 7, 0]
+
+    RenewalPolicyUpdateRequest:
+      type: object
+      description: Partial update. Omitted fields are left unchanged.
+      properties:
+        name:
+          type: string
+          minLength: 1
+          maxLength: 255
+        renewal_window_days:
+          type: integer
+          minimum: 1
+          maximum: 365
+        auto_renew:
+          type: boolean
+        max_retries:
+          type: integer
+          minimum: 0
+          maximum: 10
+        retry_interval_seconds:
+          type: integer
+          minimum: 60
+          maximum: 86400
+        alert_thresholds_days:
+          type: array
+          items:
+            type: integer
+            minimum: 0
+            maximum: 365
+
     # ─── Profiles ────────────────────────────────────────────────────
     CertificateProfile:
       type: object
@@ -3682,8 +4272,32 @@ components:
           format: date-time
         status:
           type: string
+          enum: [pending, sent, failed, dead, read]
+          description: |
+            Notification lifecycle status. I-005 adds `dead` for notifications
+            that exhausted their 5-attempt retry budget and were moved to the
+            dead-letter queue; operators triage these in the GUI's Dead letter
+            tab and use POST /notifications/{id}/requeue to resurrect them.
         error:
           type: string
+        retry_count:
+          type: integer
+          description: |
+            Number of delivery attempts made. I-005 retry-sweep field; caps
+            at max_attempts=5 before the notification transitions to `dead`.
+        next_retry_at:
+          type: string
+          format: date-time
+          description: |
+            When the next retry attempt is scheduled. I-005 retry-sweep field;
+            null for `sent`, `dead`, and `read` statuses. Backoff follows
+            `min(2^retry_count * 1m, 1h)`.
+        last_error:
+          type: string
+          description: |
+            Most recent transient delivery error (SMTP failure, webhook 5xx,
+            etc.). I-005 retry-sweep field; surfaced on the Dead letter tab
+            so operators can triage without chasing server logs.
         created_at:
           type: string
           format: date-time

cmd/agent/agent_test.go

@@ -7,6 +7,7 @@ import (
 	"crypto/elliptic"
 	"crypto/rand"
 	"crypto/rsa"
+	"crypto/tls"
 	"crypto/x509"
 	"crypto/x509/pkix"
 	"encoding/json"
@@ -72,7 +73,7 @@ func TestAgent_Heartbeat_Success(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Should not panic
 	agent.sendHeartbeat(context.Background())
@@ -93,7 +94,7 @@ func TestAgent_Heartbeat_ServerError(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Should increment consecutive failures
 	failureBefore := agent.consecutiveFailures
@@ -115,7 +116,7 @@ func TestAgent_Heartbeat_ConnectionError(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Should fail due to connection error
 	agent.sendHeartbeat(context.Background())
@@ -150,7 +151,7 @@ func TestAgent_PollWork_NoWork(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Should not panic
 	agent.pollForWork(context.Background())
@@ -195,7 +196,7 @@ func TestAgent_PollWork_Success(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Should not panic; work items are processed in separate gorines in real usage
 	agent.pollForWork(context.Background())
@@ -285,7 +286,7 @@ func TestParsePEMFile(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Parse the file
 	entries := agent.parsePEMFile(certPath)
@@ -336,7 +337,7 @@ func TestParsePEMFile_MultipleCerts(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	entries := agent.parsePEMFile(certPath)
 
@@ -362,7 +363,7 @@ func TestParseDERFile(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	entry, err := agent.parseDERFile(derPath)
 	if err != nil {
@@ -397,7 +398,7 @@ func TestParseDERFile_Invalid(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	_, err := agent.parseDERFile(derPath)
 	if err == nil {
@@ -439,7 +440,7 @@ func TestScanDirectory(t *testing.T) {
 		DiscoveryDirs: []string{tmpdir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Simulate directory walk manually (as runDiscoveryScan does)
 	var certs []discoveredCertEntry
@@ -474,7 +475,7 @@ func TestCreateTargetConnector_NGINX(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	configJSON := json.RawMessage(`{"cert_path":"/etc/nginx/cert.pem"}`)
 	connector, err := agent.createTargetConnector("NGINX", configJSON)
@@ -496,7 +497,7 @@ func TestCreateTargetConnector_Unsupported(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	_, err := agent.createTargetConnector("UnsupportedType", nil)
 
@@ -530,7 +531,7 @@ func TestFetchCertificate_Success(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	certPEM, err := agent.fetchCertificate(context.Background(), "mc-001")
 	if err != nil {
@@ -556,7 +557,7 @@ func TestFetchCertificate_NotFound(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	_, err := agent.fetchCertificate(context.Background(), "mc-nonexistent")
 	if err == nil {
@@ -592,7 +593,7 @@ func TestReportJobStatus_Success(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	err := agent.reportJobStatus(context.Background(), "j-001", "Completed", "")
 	if err != nil {
@@ -624,7 +625,7 @@ func TestReportJobStatus_WithError(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	err := agent.reportJobStatus(context.Background(), "j-001", "Failed", "deployment failed")
 	if err != nil {
@@ -658,7 +659,7 @@ func TestMakeRequest_Success(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	resp, err := agent.makeRequest(context.Background(), http.MethodPost, "/test", map[string]string{"key": "value"})
 	if err != nil {
@@ -680,7 +681,7 @@ func TestMakeRequest_InvalidURL(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	_, err := agent.makeRequest(context.Background(), http.MethodGet, "/test", nil)
 	if err == nil {
@@ -765,7 +766,7 @@ func TestNewAgent(t *testing.T) {
 	}
 
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	if agent.config != cfg {
 		t.Error("config not set correctly")
@@ -791,7 +792,7 @@ func TestNewAgent_WithLogger(t *testing.T) {
 		Hostname:  "test-host",
 	}
 
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	if agent.logger != logger {
 		t.Error("logger not set correctly")
@@ -954,7 +955,7 @@ func TestCreateTargetConnector_AllSupportedTypes(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	for _, tt := range tests {
 		t.Run(tt.name, func(t *testing.T) {
@@ -1007,7 +1008,7 @@ func TestCreateTargetConnector_InvalidJSON(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	invalidJSON := json.RawMessage("{invalid json}")
 
@@ -1031,7 +1032,7 @@ func TestCreateTargetConnector_UnknownType(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	_, err := agent.createTargetConnector("MagicBox", nil)
 
@@ -1061,7 +1062,7 @@ func TestCreateTargetConnector_EmptyConfig(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	for _, typeName := range tests {
 		t.Run(typeName, func(t *testing.T) {
@@ -1137,7 +1138,7 @@ func TestRunDiscoveryScan_ValidCerts(t *testing.T) {
 		DiscoveryDirs: []string{tmpDir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Run discovery scan
 	agent.runDiscoveryScan(context.Background())
@@ -1165,7 +1166,7 @@ func TestRunDiscoveryScan_NoCertificates(t *testing.T) {
 		DiscoveryDirs: []string{tmpDir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Run discovery scan - should complete without error even with empty directory
 	agent.runDiscoveryScan(context.Background())
@@ -1222,7 +1223,7 @@ func TestRunDiscoveryScan_MultipleCerts(t *testing.T) {
 		DiscoveryDirs: []string{tmpDir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Run discovery scan
 	agent.runDiscoveryScan(context.Background())
@@ -1273,7 +1274,7 @@ func TestRunDiscoveryScan_DERCertificate(t *testing.T) {
 		DiscoveryDirs: []string{tmpDir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Run discovery scan
 	agent.runDiscoveryScan(context.Background())
@@ -1331,7 +1332,7 @@ func TestRunDiscoveryScan_Subdirectories(t *testing.T) {
 		DiscoveryDirs: []string{tmpDir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Run discovery scan - should recursively find certs in subdirs
 	agent.runDiscoveryScan(context.Background())
@@ -1369,7 +1370,7 @@ func TestRunDiscoveryScan_ServerError(t *testing.T) {
 		DiscoveryDirs: []string{tmpDir},
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	// Should handle server error gracefully without panicking
 	agent.runDiscoveryScan(context.Background())
@@ -1396,7 +1397,7 @@ func TestDiscoveredCertEntry_ValidFields(t *testing.T) {
 		Hostname:  "test-host",
 	}
 	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
-	agent := NewAgent(cfg, logger)
+	agent, _ := NewAgent(cfg, logger)
 
 	entries := agent.parsePEMFile(certPath)
 
@@ -1447,3 +1448,244 @@ func TestDiscoveredCertEntry_ValidFields(t *testing.T) {
 		t.Error("PEMData should not be empty")
 	}
 }
+
+// ---------------------------------------------------------------------------
+// HTTPS-Everywhere milestone (v2.2, §3.2 / §7) — Phase 5 client-side tests.
+//
+// These tests pin the agent's pre-flight HTTPS-scheme guard and the TLS
+// configuration surface (CA bundle loading + TLS 1.3 round-trip) so that
+// regressions surface at unit-test time, not at the first heartbeat of a
+// production rollout. Matches the same contract asserted by the sibling
+// binaries cmd/cli/main_test.go and cmd/mcp-server/main_test.go — the three
+// must stay in lock-step because all three are HTTPS-only clients of the
+// same control plane.
+// ---------------------------------------------------------------------------
+
+// TestValidateHTTPSScheme pins the pre-flight URL-scheme guard that the
+// HTTPS-Everywhere milestone requires on the agent binary startup path. The
+// agent's diagnostic is distinct from the CLI/MCP variants because it names
+// CERTCTL_SERVER_URL (the only input channel — no --server flag on the
+// agent). Every case here mirrors the dispatch arms in cmd/agent/main.go:
+// validateHTTPSScheme; drifting the error-message substrings is what this
+// test is here to catch.
+func TestValidateHTTPSScheme(t *testing.T) {
+	tests := []struct {
+		name       string
+		serverURL  string
+		wantErr    bool
+		wantErrSub string
+	}{
+		{
+			name:      "https URL passes",
+			serverURL: "https://certctl-server:8443",
+			wantErr:   false,
+		},
+		{
+			name:      "https URL with path passes",
+			serverURL: "https://certctl.example.com/api/v1",
+			wantErr:   false,
+		},
+		{
+			name:      "uppercase HTTPS scheme passes (url.Parse lowercases)",
+			serverURL: "HTTPS://certctl-server:8443",
+			wantErr:   false,
+		},
+		{
+			name:       "empty URL rejected names CERTCTL_SERVER_URL",
+			serverURL:  "",
+			wantErr:    true,
+			wantErrSub: "CERTCTL_SERVER_URL is empty",
+		},
+		{
+			name:       "plaintext http rejected",
+			serverURL:  "http://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "plaintext http://",
+		},
+		{
+			name:       "bare host missing scheme falls through to unsupported",
+			serverURL:  "localhost:8443",
+			wantErr:    true,
+			// url.Parse treats "localhost:8443" as scheme=localhost,
+			// opaque=8443 — exercises the default arm (unsupported scheme)
+			// rather than the empty-scheme arm. Both are fail-closed, which
+			// is what we care about.
+			wantErrSub: "unsupported scheme",
+		},
+		{
+			name:       "path-only URL rejected",
+			serverURL:  "//certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "missing a scheme",
+		},
+		{
+			name:       "unsupported scheme rejected",
+			serverURL:  "ftp://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "unsupported scheme",
+		},
+		{
+			name:       "ws scheme rejected",
+			serverURL:  "ws://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "unsupported scheme",
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			err := validateHTTPSScheme(tt.serverURL)
+			if (err != nil) != tt.wantErr {
+				t.Fatalf("validateHTTPSScheme(%q) err=%v wantErr=%v", tt.serverURL, err, tt.wantErr)
+			}
+			if tt.wantErr && tt.wantErrSub != "" && !strings.Contains(err.Error(), tt.wantErrSub) {
+				t.Errorf("validateHTTPSScheme(%q) err=%q must contain %q so operators see the right diagnostic",
+					tt.serverURL, err.Error(), tt.wantErrSub)
+			}
+		})
+	}
+}
+
+// writeTestCABundle PEM-encodes a cert's DER bytes and writes the result to a
+// tmp file inside dir. Used by CA-bundle tests so each case owns a distinct
+// file path (matters for the "missing file" case which must point at a path
+// that provably does not exist). Returns the path.
+func writeTestCABundle(t *testing.T, dir string, certDER []byte, filename string) string {
+	t.Helper()
+	pemBytes := pem.EncodeToMemory(&pem.Block{Type: "CERTIFICATE", Bytes: certDER})
+	path := filepath.Join(dir, filename)
+	if err := os.WriteFile(path, pemBytes, 0644); err != nil {
+		t.Fatalf("writing CA bundle %q: %v", path, err)
+	}
+	return path
+}
+
+// TestNewAgent_CABundle_Success confirms that a well-formed PEM bundle gets
+// parsed into an x509.CertPool and wired onto the agent's HTTP client
+// transport. This is the happy path the docs/tls.md "Private CA signed
+// server cert" section depends on.
+func TestNewAgent_CABundle_Success(t *testing.T) {
+	cert, err := generateTestCertWithCN("test.certctl.local")
+	if err != nil {
+		t.Fatalf("generateTestCertWithCN: %v", err)
+	}
+	bundlePath := writeTestCABundle(t, t.TempDir(), cert.Raw, "ca-bundle.pem")
+
+	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
+	agent, err := NewAgent(&AgentConfig{
+		ServerURL:    "https://certctl-server:8443",
+		APIKey:       "test-key",
+		AgentID:      "a-test",
+		Hostname:     "test-host",
+		CABundlePath: bundlePath,
+	}, logger)
+	if err != nil {
+		t.Fatalf("NewAgent with valid CA bundle err=%v want nil", err)
+	}
+
+	transport, ok := agent.client.Transport.(*http.Transport)
+	if !ok {
+		t.Fatalf("agent.client.Transport is %T; want *http.Transport", agent.client.Transport)
+	}
+	if transport.TLSClientConfig == nil {
+		t.Fatal("TLSClientConfig is nil; HTTPS-everywhere milestone requires a non-nil TLS config")
+	}
+	if transport.TLSClientConfig.MinVersion != tls.VersionTLS13 {
+		t.Errorf("MinVersion=%x want TLS 1.3 (%x) per §2.3 of the milestone spec",
+			transport.TLSClientConfig.MinVersion, tls.VersionTLS13)
+	}
+	if transport.TLSClientConfig.RootCAs == nil {
+		t.Error("RootCAs is nil; the configured CA bundle was silently dropped")
+	}
+}
+
+// TestNewAgent_CABundle_MissingFile pins the fail-loud behavior when the
+// operator points CERTCTL_SERVER_CA_BUNDLE_PATH at a path that does not
+// exist. Falling back to system roots here would mask a misconfiguration as
+// a much harder-to-debug TLS handshake failure downstream.
+func TestNewAgent_CABundle_MissingFile(t *testing.T) {
+	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
+	missingPath := filepath.Join(t.TempDir(), "does-not-exist.pem")
+	_, err := NewAgent(&AgentConfig{
+		ServerURL:    "https://certctl-server:8443",
+		APIKey:       "test-key",
+		AgentID:      "a-test",
+		Hostname:     "test-host",
+		CABundlePath: missingPath,
+	}, logger)
+	if err == nil {
+		t.Fatal("NewAgent err=nil for missing CA bundle path; must fail loud at startup")
+	}
+	if !strings.Contains(err.Error(), "reading CA bundle") {
+		t.Errorf("err=%q must contain \"reading CA bundle\" so operators can trace the cause", err.Error())
+	}
+}
+
+// TestNewAgent_CABundle_EmptyPEM covers the "file exists but contains no
+// valid certs" case (garbage, wrong-format, stripped PEM). AppendCertsFromPEM
+// returns false in this case; NewAgent must translate that into a fail-loud
+// startup error rather than quietly carry on with an empty pool.
+func TestNewAgent_CABundle_EmptyPEM(t *testing.T) {
+	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
+	bundlePath := filepath.Join(t.TempDir(), "empty.pem")
+	if err := os.WriteFile(bundlePath, []byte("not a pem-encoded certificate, just garbage\n"), 0644); err != nil {
+		t.Fatalf("writing garbage bundle: %v", err)
+	}
+	_, err := NewAgent(&AgentConfig{
+		ServerURL:    "https://certctl-server:8443",
+		APIKey:       "test-key",
+		AgentID:      "a-test",
+		Hostname:     "test-host",
+		CABundlePath: bundlePath,
+	}, logger)
+	if err == nil {
+		t.Fatal("NewAgent err=nil for empty-PEM CA bundle; must fail loud at startup")
+	}
+	if !strings.Contains(err.Error(), "no valid PEM-encoded certificates") {
+		t.Errorf("err=%q must contain \"no valid PEM-encoded certificates\" so operators see why the bundle was rejected", err.Error())
+	}
+}
+
+// TestNewAgent_TLSRoundTrip is the end-to-end integration-style check: spin
+// up an httptest.NewTLSServer (which presents a self-signed cert over TLS
+// 1.3), feed that cert into the agent as a CA bundle, and confirm the agent
+// successfully completes a heartbeat round-trip over HTTPS. This proves that
+// (a) the CA pool is actually being consulted during verification and (b)
+// the TLS 1.3 MinVersion doesn't break against httptest's default
+// negotiation. Equivalent to the "TLS handshake succeeds against a
+// self-signed control plane" integration gate, but runs in-process with no
+// Docker dependency.
+func TestNewAgent_TLSRoundTrip(t *testing.T) {
+	var heartbeatHit int
+	server := httptest.NewTLSServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		if r.URL.Path == "/api/v1/agents/a-tls-test/heartbeat" && r.Method == http.MethodPost {
+			heartbeatHit++
+			w.WriteHeader(http.StatusOK)
+			return
+		}
+		w.WriteHeader(http.StatusNotFound)
+	}))
+	defer server.Close()
+
+	// server.Certificate() returns the *x509.Certificate httptest presents;
+	// PEM-encode its DER bytes so NewAgent's AppendCertsFromPEM can ingest it.
+	bundlePath := writeTestCABundle(t, t.TempDir(), server.Certificate().Raw, "httptest-ca.pem")
+
+	logger := slog.New(slog.NewTextHandler(io.Discard, nil))
+	agent, err := NewAgent(&AgentConfig{
+		ServerURL:    server.URL,
+		APIKey:       "test-key",
+		AgentID:      "a-tls-test",
+		Hostname:     "tls-test-host",
+		CABundlePath: bundlePath,
+	}, logger)
+	if err != nil {
+		t.Fatalf("NewAgent with httptest CA bundle err=%v want nil", err)
+	}
+
+	agent.sendHeartbeat(context.Background())
+
+	if heartbeatHit != 1 {
+		t.Fatalf("heartbeat handler hit %d times; want 1 — the TLS round-trip must actually complete", heartbeatHit)
+	}
+}

cmd/agent/main.go

@@ -8,21 +8,25 @@ import (
 	"crypto/rand"
 	"crypto/rsa"
 	"crypto/sha256"
+	"crypto/tls"
 	"crypto/x509"
 	"crypto/x509/pkix"
 	"encoding/json"
 	"encoding/pem"
+	"errors"
 	"flag"
 	"fmt"
 	"io"
 	"log/slog"
 	"net"
 	"net/http"
+	"net/url"
 	"os"
 	"os/signal"
 	"path/filepath"
 	"runtime"
 	"strings"
+	"sync"
 	"syscall"
 	"time"
 
@@ -44,15 +48,27 @@ import (
 
 // AgentConfig represents the agent-side configuration.
 type AgentConfig struct {
-	ServerURL     string   // Control plane server URL (e.g., http://localhost:8443)
-	APIKey        string   // Agent API key for authentication
-	AgentName     string   // Agent name for identification
-	AgentID       string   // Agent ID for API calls (set after registration or from env)
-	Hostname      string   // Server hostname
-	KeyDir        string   // Directory for storing private keys (default: /var/lib/certctl/keys)
-	DiscoveryDirs []string // Directories to scan for certificates (comma-separated via env)
+	ServerURL          string   // Control plane server URL (e.g., https://localhost:8443) — must be https:// scheme
+	APIKey             string   // Agent API key for authentication
+	AgentName          string   // Agent name for identification
+	AgentID            string   // Agent ID for API calls (set after registration or from env)
+	Hostname           string   // Server hostname
+	KeyDir             string   // Directory for storing private keys (default: /var/lib/certctl/keys)
+	DiscoveryDirs      []string // Directories to scan for certificates (comma-separated via env)
+	CABundlePath       string   // Optional path to a PEM-encoded CA bundle that signed the server's cert (empty = system roots)
+	InsecureSkipVerify bool     // Dev-only: skip TLS certificate verification. Never enable in production. See docs/tls.md.
 }
 
+// ErrAgentRetired is the sentinel returned by [Agent.Run] when the control
+// plane responds with HTTP 410 Gone to a heartbeat or work-poll request — the
+// canonical signal that this agent's row has been soft-retired server-side
+// (see I-004 in cowork/certctl-coverage-gap-audit.md). The binary must
+// terminate cleanly: an init-system restart would only produce another 410
+// and wedge the host in a restart loop. main() translates this sentinel into
+// a zero exit code so systemd (Restart=on-failure) and launchd do not respawn
+// the process. Do not wrap this error — main() matches it with errors.Is.
+var ErrAgentRetired = fmt.Errorf("agent retired by control plane")
+
 // Agent represents the local agent that runs on target servers.
 // It periodically sends heartbeats, polls for work, executes deployment and CSR jobs,
 // and scans configured directories for existing certificates.
@@ -68,6 +84,17 @@ type Agent struct {
 	pollInterval          time.Duration
 	discoveryInterval     time.Duration
 	consecutiveFailures   int
+
+	// I-004: terminal retirement signal. retiredSignal is closed exactly once
+	// (guarded by retiredOnce) when either sendHeartbeat or pollForWork
+	// observes HTTP 410 Gone. The Run() select loop picks up the close and
+	// returns ErrAgentRetired, unwinding the goroutine cleanly so main() can
+	// log + exit(0). Using a channel + sync.Once (rather than an atomic bool
+	// + polling) lets us fall through the select statement immediately instead
+	// of waiting for the next ticker; the zero-allocation close is safe to
+	// race with ctx.Done() and other cases.
+	retiredOnce   sync.Once
+	retiredSignal chan struct{}
 }
 
 // WorkResponse represents the response from the work polling endpoint.
@@ -90,15 +117,78 @@ type JobItem struct {
 }
 
 // NewAgent creates a new agent instance.
-func NewAgent(cfg *AgentConfig, logger *slog.Logger) *Agent {
+//
+// The returned HTTP client enforces HTTPS-only control-plane access per the
+// HTTPS-Everywhere milestone (see docs/tls.md). TLS 1.3 is required; the
+// optional CABundlePath loads a PEM bundle into RootCAs so the agent can
+// trust internal / self-signed server certs without touching system trust
+// stores. InsecureSkipVerify is a dev-only escape hatch — callers must log a
+// loud warning when it's set; never enable in production (see §2.4 of the
+// milestone spec and docs/upgrade-to-tls.md).
+//
+// Returns an error if CABundlePath is set but unreadable or malformed — fail
+// loud at startup rather than silently fall back to system roots, which would
+// turn a misconfigured bundle path into a cryptic "x509: certificate signed
+// by unknown authority" on the first heartbeat.
+func NewAgent(cfg *AgentConfig, logger *slog.Logger) (*Agent, error) {
+	tlsConfig := &tls.Config{
+		MinVersion:         tls.VersionTLS13,
+		InsecureSkipVerify: cfg.InsecureSkipVerify, //nolint:gosec // opt-in dev escape hatch, documented in docs/tls.md
+	}
+	if cfg.CABundlePath != "" {
+		pemBytes, err := os.ReadFile(cfg.CABundlePath)
+		if err != nil {
+			return nil, fmt.Errorf("reading CA bundle at %q: %w", cfg.CABundlePath, err)
+		}
+		pool := x509.NewCertPool()
+		if !pool.AppendCertsFromPEM(pemBytes) {
+			return nil, fmt.Errorf("CA bundle at %q contains no valid PEM-encoded certificates", cfg.CABundlePath)
+		}
+		tlsConfig.RootCAs = pool
+	}
+
+	httpClient := &http.Client{
+		Timeout: 30 * time.Second,
+		Transport: &http.Transport{
+			TLSClientConfig:       tlsConfig,
+			ForceAttemptHTTP2:     true,
+			MaxIdleConns:          10,
+			IdleConnTimeout:       90 * time.Second,
+			TLSHandshakeTimeout:   10 * time.Second,
+			ExpectContinueTimeout: 1 * time.Second,
+		},
+	}
+
 	return &Agent{
 		config:            cfg,
 		logger:            logger,
-		client:            &http.Client{Timeout: 30 * time.Second},
+		client:            httpClient,
 		heartbeatInterval: 60 * time.Second,
 		pollInterval:      30 * time.Second,
 		discoveryInterval: 6 * time.Hour, // scan for certs every 6 hours
-	}
+		retiredSignal:     make(chan struct{}),
+	}, nil
+}
+
+// markRetired records that the control plane has declared this agent retired
+// (HTTP 410 Gone on heartbeat or work poll). Idempotent via sync.Once — if
+// both the heartbeat and work-poll paths observe 410 in the same tick, only
+// the first close() runs and we avoid a runtime panic. Emits an ERROR-level
+// log line so init-system journaling captures it prominently, and includes
+// the source (heartbeat/work_poll), response body, and status code so the
+// operator can verify it's a genuine retirement signal rather than a
+// misrouted request. After this returns, the select-loop case in Run()
+// observes the closed channel on its next iteration and returns
+// ErrAgentRetired.
+func (a *Agent) markRetired(source string, statusCode int, body string) {
+	a.retiredOnce.Do(func() {
+		a.logger.Error("agent has been retired by control plane — shutting down",
+			"source", source,
+			"status", statusCode,
+			"body", body,
+			"agent_id", a.config.AgentID)
+		close(a.retiredSignal)
+	})
 }
 
 // Run starts the agent's main loop.
@@ -154,6 +244,19 @@ func (a *Agent) Run(ctx context.Context) error {
 			a.logger.Info("agent shutting down", "reason", ctx.Err())
 			return ctx.Err()
 
+		// I-004: retiredSignal is closed exactly once (via markRetired's
+		// sync.Once) when either sendHeartbeat or pollForWork observes HTTP 410
+		// Gone from the control plane. Falling through this case immediately
+		// (rather than waiting for the next ticker) lets the agent shut down
+		// quickly once retirement is confirmed — every extra heartbeat against a
+		// retired row is wasted work and noise in the audit trail. Returning
+		// ErrAgentRetired propagates up to main(), which matches it with
+		// errors.Is and exits(0) so systemd/launchd do not respawn the process.
+		case <-a.retiredSignal:
+			a.logger.Info("agent retired signal received — exiting event loop",
+				"agent_id", a.config.AgentID)
+			return ErrAgentRetired
+
 		case <-heartbeatTicker.C:
 			a.sendHeartbeat(ctx)
 
@@ -166,7 +269,14 @@ func (a *Agent) Run(ctx context.Context) error {
 				a.logger.Warn("backing off due to consecutive failures",
 					"failures", a.consecutiveFailures,
 					"backoff", backoff.String())
-				time.Sleep(backoff)
+				// F-003: ctx-aware wait so graceful shutdown does not stall on
+				// a long backoff. If ctx cancels mid-backoff, return to the
+				// outer loop so the <-ctx.Done() case can trigger clean exit.
+				select {
+				case <-ctx.Done():
+					continue
+				case <-time.After(backoff):
+				}
 			}
 			a.pollForWork(ctx)
 
@@ -209,6 +319,22 @@ func (a *Agent) sendHeartbeat(ctx context.Context) {
 	}
 	defer resp.Body.Close()
 
+	// I-004: HTTP 410 Gone is the terminal signal from the control plane that
+	// this agent's row has been soft-retired (see internal/api/handler/agent.go
+	// heartbeat path + AgentRetirementService). Treat it separately from the
+	// generic non-200 error branch: record the event to markRetired (which closes
+	// retiredSignal exactly once via sync.Once) and return without bumping
+	// consecutiveFailures — this is not a transient failure, it's a clean
+	// shutdown. The Run() select loop picks up the closed channel on its next
+	// iteration and returns ErrAgentRetired, which main() translates into an
+	// exit(0) so systemd/launchd don't respawn the process into another 410
+	// loop.
+	if resp.StatusCode == http.StatusGone {
+		body, _ := io.ReadAll(resp.Body)
+		a.markRetired("heartbeat", resp.StatusCode, string(body))
+		return
+	}
+
 	if resp.StatusCode != http.StatusOK {
 		body, _ := io.ReadAll(resp.Body)
 		a.logger.Error("heartbeat rejected",
@@ -237,6 +363,19 @@ func (a *Agent) pollForWork(ctx context.Context) {
 	}
 	defer resp.Body.Close()
 
+	// I-004: same terminal-retirement handling as sendHeartbeat. Work-poll is the
+	// other hot path that can observe an agent's soft-retirement; if the
+	// heartbeat tick happens to fire after a work-poll tick within the same
+	// retirement window, this branch catches it first. markRetired's sync.Once
+	// guards idempotency so racing both paths in the same tick only closes the
+	// signal channel once. No consecutiveFailures increment — retirement is
+	// not a transient failure.
+	if resp.StatusCode == http.StatusGone {
+		body, _ := io.ReadAll(resp.Body)
+		a.markRetired("work_poll", resp.StatusCode, string(body))
+		return
+	}
+
 	if resp.StatusCode != http.StatusOK {
 		body, _ := io.ReadAll(resp.Body)
 		a.logger.Error("work poll rejected",
@@ -1031,12 +1170,14 @@ func certKeyInfo(cert *x509.Certificate) (string, int) {
 
 func main() {
 	// Parse command-line flags (with env var fallbacks for Docker deployment)
-	serverURL := flag.String("server", getEnvDefault("CERTCTL_SERVER_URL", "http://localhost:8443"), "Control plane server URL")
+	serverURL := flag.String("server", getEnvDefault("CERTCTL_SERVER_URL", "https://localhost:8443"), "Control plane server URL (must be https://)")
 	apiKey := flag.String("api-key", getEnvDefault("CERTCTL_API_KEY", ""), "Agent API key")
 	agentName := flag.String("name", getEnvDefault("CERTCTL_AGENT_NAME", "certctl-agent"), "Agent name")
 	agentID := flag.String("agent-id", getEnvDefault("CERTCTL_AGENT_ID", ""), "Agent ID (from registration)")
 	keyDir := flag.String("key-dir", getEnvDefault("CERTCTL_KEY_DIR", "/var/lib/certctl/keys"), "Directory for storing private keys")
 	discoveryDirsStr := flag.String("discovery-dirs", getEnvDefault("CERTCTL_DISCOVERY_DIRS", ""), "Comma-separated directories to scan for certificates")
+	caBundlePath := flag.String("ca-bundle", getEnvDefault("CERTCTL_SERVER_CA_BUNDLE_PATH", ""), "Path to a PEM-encoded CA bundle that signed the server's TLS cert (optional; falls back to system roots)")
+	insecureSkipVerify := flag.Bool("insecure-skip-verify", getEnvBoolDefault("CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY", false), "Dev-only: skip TLS certificate verification. Never enable in production. See docs/tls.md.")
 	flag.Parse()
 
 	if *apiKey == "" {
@@ -1050,6 +1191,18 @@ func main() {
 		os.Exit(1)
 	}
 
+	// Pre-flight URL-scheme validation — reject plaintext http:// before any
+	// network call. The HTTPS-Everywhere milestone (§2.4, §7) mandates that
+	// mis-configured agents fail loudly at startup with a diagnostic pointing
+	// at the upgrade guide, rather than producing a TCP-refused or
+	// TLS-handshake-error that obscures the actual cause.
+	if err := validateHTTPSScheme(*serverURL); err != nil {
+		fmt.Fprintf(os.Stderr, "Error: %v\n", err)
+		fmt.Fprintf(os.Stderr, "\nThe certctl control plane is HTTPS-only as of v2.2.\n")
+		fmt.Fprintf(os.Stderr, "See docs/upgrade-to-tls.md for the cutover walkthrough.\n")
+		os.Exit(1)
+	}
+
 	// Set up structured logging
 	logLevel := slog.LevelInfo
 	if getEnvDefault("CERTCTL_LOG_LEVEL", "info") == "debug" {
@@ -1078,17 +1231,27 @@ func main() {
 
 	// Create agent configuration
 	agentCfg := &AgentConfig{
-		ServerURL:     *serverURL,
-		APIKey:        *apiKey,
-		AgentName:     *agentName,
-		AgentID:       *agentID,
-		Hostname:      hostname,
-		KeyDir:        *keyDir,
-		DiscoveryDirs: discoveryDirs,
+		ServerURL:          *serverURL,
+		APIKey:             *apiKey,
+		AgentName:          *agentName,
+		AgentID:            *agentID,
+		Hostname:           hostname,
+		KeyDir:             *keyDir,
+		DiscoveryDirs:      discoveryDirs,
+		CABundlePath:       *caBundlePath,
+		InsecureSkipVerify: *insecureSkipVerify,
+	}
+
+	if agentCfg.InsecureSkipVerify {
+		logger.Warn("TLS certificate verification is disabled (CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true) — never enable this in production")
 	}
 
 	// Create and start agent
-	agent := NewAgent(agentCfg, logger)
+	agent, err := NewAgent(agentCfg, logger)
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "Error: failed to initialize agent: %v\n", err)
+		os.Exit(1)
+	}
 
 	// Create context with cancellation for graceful shutdown
 	ctx, cancel := context.WithCancel(context.Background())
@@ -1117,6 +1280,19 @@ func main() {
 		cancel()
 		<-errChan
 	case err := <-errChan:
+		// I-004: ErrAgentRetired is a terminal, *clean* shutdown — the control
+		// plane responded HTTP 410 Gone on heartbeat/work-poll, meaning this
+		// agent's row has been soft-retired and will never be reachable again.
+		// Exit 0 so systemd's Restart=on-failure and launchd's KeepAlive do NOT
+		// respawn the process into another 410 loop (which would wedge the host
+		// and spam the control plane). Operators can observe the retirement via
+		// audit_events or the AgentsPage retired tab; the terminal log line on
+		// the way out is enough for post-mortem forensics.
+		if errors.Is(err, ErrAgentRetired) {
+			logger.Info("agent retired by control plane — exiting without restart",
+				"agent_id", agentCfg.AgentID)
+			return
+		}
 		if err != context.Canceled {
 			logger.Error("agent error", "error", err)
 			os.Exit(1)
@@ -1133,3 +1309,49 @@ func getEnvDefault(key, defaultValue string) string {
 	}
 	return defaultValue
 }
+
+// getEnvBoolDefault parses an environment variable as a boolean. Accepts "1",
+// "t", "true", "T", "TRUE", "True" as true; anything else (including empty)
+// returns the provided default. Kept permissive on purpose so operators can
+// flip the dev-only TLS skip-verify toggle with any common truthy spelling
+// without having to remember exactly what we parse.
+func getEnvBoolDefault(key string, defaultValue bool) bool {
+	raw := os.Getenv(key)
+	if raw == "" {
+		return defaultValue
+	}
+	switch strings.ToLower(strings.TrimSpace(raw)) {
+	case "1", "t", "true", "yes", "on":
+		return true
+	case "0", "f", "false", "no", "off":
+		return false
+	default:
+		return defaultValue
+	}
+}
+
+// validateHTTPSScheme enforces the HTTPS-Everywhere milestone's §7 acceptance
+// criterion: "Agent with CERTCTL_SERVER_URL=http://... fails at startup with
+// a fail-loud diagnostic pointing at docs/upgrade-to-tls.md. Not TCP-refused,
+// not TLS-handshake-error — a pre-flight config validation failure before any
+// network call." Returns a descriptive error; the caller prints the upgrade
+// guide pointer and exits non-zero.
+func validateHTTPSScheme(serverURL string) error {
+	if serverURL == "" {
+		return fmt.Errorf("CERTCTL_SERVER_URL is empty — set it to an https:// URL (e.g., https://certctl-server:8443)")
+	}
+	u, err := url.Parse(serverURL)
+	if err != nil {
+		return fmt.Errorf("CERTCTL_SERVER_URL %q is not a valid URL: %w", serverURL, err)
+	}
+	switch strings.ToLower(u.Scheme) {
+	case "https":
+		return nil
+	case "http":
+		return fmt.Errorf("CERTCTL_SERVER_URL %q uses plaintext http:// — the certctl control plane is HTTPS-only", serverURL)
+	case "":
+		return fmt.Errorf("CERTCTL_SERVER_URL %q is missing a scheme — expected https://", serverURL)
+	default:
+		return fmt.Errorf("CERTCTL_SERVER_URL %q uses unsupported scheme %q — expected https://", serverURL, u.Scheme)
+	}
+}

cmd/agent/verify_test.go

@@ -228,7 +228,7 @@ func TestReportVerificationResult_Success(t *testing.T) {
 		ServerURL: server.URL,
 		APIKey:    "test-api-key",
 	}
-	agent := NewAgent(cfg, nil)
+	agent, _ := NewAgent(cfg, nil)
 
 	result := &VerificationResult{
 		ExpectedFingerprint: "abc123",
@@ -244,7 +244,7 @@ func TestReportVerificationResult_Success(t *testing.T) {
 }
 
 func TestReportVerificationResult_MissingFields(t *testing.T) {
-	agent := NewAgent(&AgentConfig{}, nil)
+	agent, _ := NewAgent(&AgentConfig{}, nil)
 
 	result := &VerificationResult{
 		Verified:   true,
@@ -343,7 +343,7 @@ func TestReportVerificationResult_ServerError(t *testing.T) {
 		ServerURL: server.URL,
 		APIKey:    "test-api-key",
 	}
-	agent := NewAgent(cfg, nil)
+	agent, _ := NewAgent(cfg, nil)
 
 	result := &VerificationResult{
 		ExpectedFingerprint: "abc123",

cmd/cli/main.go

@@ -3,7 +3,9 @@ package main
 import (
 	"flag"
 	"fmt"
+	"net/url"
 	"os"
+	"strings"
 
 	"github.com/shankar0123/certctl/internal/cli"
 )
@@ -27,35 +29,50 @@ Commands:
   certs renew ID   Trigger certificate renewal
   certs revoke ID  Revoke a certificate
 
-  agents list      List agents
-  agents get ID    Get agent details
+  agents list              List agents (add --retired to list soft-retired agents)
+  agents get ID            Get agent details
+  agents retire ID         Soft-retire an agent (add --force --reason "…" to cascade)
 
   jobs list        List jobs
   jobs get ID      Get job details
   jobs cancel ID   Cancel a pending job
 
   import FILE      Bulk import certificates from PEM file(s)
+                   Required: --owner-id, --team-id, --renewal-policy-id, --issuer-id
+                   Optional: --name-template (default {cn}), --environment (default imported)
 
   status           Show server health + summary stats
   version          Show CLI version
 
 Examples:
-  certctl-cli --server http://localhost:8443 --api-key mykey certs list
+  certctl-cli --server https://localhost:8443 --api-key mykey certs list
   certctl-cli certs renew mc-prod --format json
   certctl-cli import certs.pem
 `)
 	}
 
-	serverURL := fs.String("server", os.Getenv("CERTCTL_SERVER_URL"), "certctl server URL (env: CERTCTL_SERVER_URL)")
-	if *serverURL == "" {
-		*serverURL = "http://localhost:8443"
+	// HTTPS-Everywhere (v2.2): the server is HTTPS-only. The default URL uses
+	// https://; plaintext http:// is rejected by validateHTTPSScheme below.
+	defaultServer := os.Getenv("CERTCTL_SERVER_URL")
+	if defaultServer == "" {
+		defaultServer = "https://localhost:8443"
 	}
+	serverURL := fs.String("server", defaultServer, "certctl server URL — must be https:// (env: CERTCTL_SERVER_URL)")
 
 	apiKey := fs.String("api-key", os.Getenv("CERTCTL_API_KEY"), "API key for authentication (env: CERTCTL_API_KEY)")
 	format := fs.String("format", "table", "Output format: table, json")
+	caBundlePath := fs.String("ca-bundle", os.Getenv("CERTCTL_SERVER_CA_BUNDLE_PATH"), "Path to a PEM-encoded CA bundle that signed the server cert (env: CERTCTL_SERVER_CA_BUNDLE_PATH)")
+	insecure := fs.Bool("insecure", strings.EqualFold(os.Getenv("CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY"), "true"), "Skip TLS certificate verification — dev only, never set in production (env: CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY)")
 
 	fs.Parse(os.Args[1:])
 
+	if err := validateHTTPSScheme(*serverURL); err != nil {
+		fmt.Fprintf(os.Stderr, "Error: %v\n", err)
+		fmt.Fprintf(os.Stderr, "\nThe certctl control plane is HTTPS-only as of v2.2.\n")
+		fmt.Fprintf(os.Stderr, "See docs/upgrade-to-tls.md for the cutover walkthrough.\n")
+		os.Exit(1)
+	}
+
 	args := fs.Args()
 	if len(args) == 0 {
 		fs.Usage()
@@ -63,13 +80,16 @@ Examples:
 	}
 
 	// Create client
-	client := cli.NewClient(*serverURL, *apiKey, *format)
+	client, err := cli.NewClient(*serverURL, *apiKey, *format, *caBundlePath, *insecure)
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "Error: %v\n", err)
+		os.Exit(1)
+	}
 
 	// Dispatch to appropriate command
 	command := args[0]
 	cmdArgs := args[1:]
 
-	var err error
 	switch command {
 	case "certs":
 		err = handleCerts(client, cmdArgs)
@@ -138,9 +158,19 @@ func handleCerts(client *cli.Client, args []string) error {
 	}
 }
 
+// handleAgents dispatches the `agents` subcommands.
+//
+// I-004 additions:
+//
+//	agents list --retired      — hit the opt-in /agents/retired endpoint
+//	                             instead of the default listing (which
+//	                             filters retired rows out).
+//	agents retire <id>         — soft-retire an agent (DELETE /agents/{id}).
+//	                             --force cascades; --reason is required with
+//	                             --force (mirrors ErrForceReasonRequired).
 func handleAgents(client *cli.Client, args []string) error {
 	if len(args) == 0 {
-		fmt.Fprintf(os.Stderr, "usage: agents <list|get> [options]\n")
+		fmt.Fprintf(os.Stderr, "usage: agents <list|get|retire> [options]\n")
 		return nil
 	}
 
@@ -149,13 +179,34 @@ func handleAgents(client *cli.Client, args []string) error {
 
 	switch subcommand {
 	case "list":
-		return client.ListAgents(subArgs)
+		// --retired flag splits to a separate endpoint. We intercept it
+		// client-side and strip it before delegating, so both code paths
+		// share the --page/--per-page flag parsing inside the client.
+		retired := false
+		rest := make([]string, 0, len(subArgs))
+		for _, a := range subArgs {
+			if a == "--retired" {
+				retired = true
+				continue
+			}
+			rest = append(rest, a)
+		}
+		if retired {
+			return client.ListRetiredAgents(rest)
+		}
+		return client.ListAgents(rest)
 	case "get":
 		if len(subArgs) == 0 {
 			fmt.Fprintf(os.Stderr, "usage: agents get <id>\n")
 			return nil
 		}
 		return client.GetAgent(subArgs[0])
+	case "retire":
+		if len(subArgs) == 0 {
+			fmt.Fprintf(os.Stderr, "usage: agents retire <id> [--force] [--reason <reason>]\n")
+			return nil
+		}
+		return client.RetireAgent(subArgs)
 	default:
 		fmt.Fprintf(os.Stderr, "unknown subcommand: agents %s\n", subcommand)
 		return nil
@@ -203,3 +254,26 @@ func handleImport(client *cli.Client, args []string) error {
 func handleStatus(client *cli.Client) error {
 	return client.GetStatus()
 }
+
+// validateHTTPSScheme rejects plaintext and empty-scheme server URLs at
+// startup so operators get a fail-loud diagnostic before any network call,
+// not a TCP-refused or TLS-handshake-error downstream. See docs/upgrade-to-tls.md.
+func validateHTTPSScheme(serverURL string) error {
+	if serverURL == "" {
+		return fmt.Errorf("server URL is empty — set --server (or CERTCTL_SERVER_URL) to an https:// URL (e.g., https://certctl-server:8443)")
+	}
+	u, err := url.Parse(serverURL)
+	if err != nil {
+		return fmt.Errorf("server URL %q is not a valid URL: %w", serverURL, err)
+	}
+	switch strings.ToLower(u.Scheme) {
+	case "https":
+		return nil
+	case "http":
+		return fmt.Errorf("server URL %q uses plaintext http:// — the certctl control plane is HTTPS-only", serverURL)
+	case "":
+		return fmt.Errorf("server URL %q is missing a scheme — expected https://", serverURL)
+	default:
+		return fmt.Errorf("server URL %q uses unsupported scheme %q — expected https://", serverURL, u.Scheme)
+	}
+}

cmd/cli/main_test.go

@@ -0,0 +1,96 @@
+package main
+
+import (
+	"strings"
+	"testing"
+)
+
+// TestValidateHTTPSScheme pins the pre-flight URL-scheme guard that the
+// HTTPS-Everywhere milestone (v2.2, §3.2) requires on the certctl-cli binary
+// startup path. The CLI's diagnostic is distinct from the agent and MCP server
+// because it surfaces the --server flag alongside CERTCTL_SERVER_URL — so the
+// empty-URL case pins that flag-name substring separately. Every other case
+// mirrors the dispatch arms in cmd/cli/main.go:validateHTTPSScheme; drifting
+// the substrings is what this test is here to catch.
+func TestValidateHTTPSScheme(t *testing.T) {
+	tests := []struct {
+		name       string
+		serverURL  string
+		wantErr    bool
+		wantErrSub string // substring that MUST appear in the error message
+	}{
+		{
+			name:      "https URL passes",
+			serverURL: "https://certctl-server:8443",
+			wantErr:   false,
+		},
+		{
+			name:      "https URL with path passes",
+			serverURL: "https://certctl.example.com/api/v1",
+			wantErr:   false,
+		},
+		{
+			name:      "uppercase HTTPS scheme passes (url.Parse lowercases)",
+			serverURL: "HTTPS://certctl-server:8443",
+			wantErr:   false,
+		},
+		{
+			name:       "empty URL rejected mentions --server flag",
+			serverURL:  "",
+			wantErr:    true,
+			wantErrSub: "--server",
+		},
+		{
+			name:       "empty URL rejected also mentions CERTCTL_SERVER_URL",
+			serverURL:  "",
+			wantErr:    true,
+			wantErrSub: "CERTCTL_SERVER_URL",
+		},
+		{
+			name:       "plaintext http rejected",
+			serverURL:  "http://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "plaintext http://",
+		},
+		{
+			name:       "bare host missing scheme rejected",
+			serverURL:  "localhost:8443",
+			wantErr:    true,
+			// url.Parse treats "localhost:8443" as scheme=localhost, opaque=8443
+			// — exercises the default arm (unsupported scheme) rather than the
+			// empty-scheme arm. Both are fail-closed, which is what we care about.
+			wantErrSub: "unsupported scheme",
+		},
+		{
+			name:       "path-only URL rejected",
+			serverURL:  "//certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "missing a scheme",
+		},
+		{
+			name:       "unsupported scheme rejected",
+			serverURL:  "ftp://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "unsupported scheme",
+		},
+		{
+			name:       "ws scheme rejected",
+			serverURL:  "ws://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "unsupported scheme",
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			err := validateHTTPSScheme(tt.serverURL)
+			if (err != nil) != tt.wantErr {
+				t.Fatalf("validateHTTPSScheme(%q) err=%v wantErr=%v", tt.serverURL, err, tt.wantErr)
+			}
+			if tt.wantErr && tt.wantErrSub != "" && !strings.Contains(err.Error(), tt.wantErrSub) {
+				t.Errorf("validateHTTPSScheme(%q) err=%q must contain %q so operators see the right diagnostic",
+					tt.serverURL, err.Error(), tt.wantErrSub)
+			}
+		})
+	}
+}

cmd/mcp-server/main.go

@@ -4,8 +4,10 @@ import (
 	"context"
 	"fmt"
 	"log"
+	"net/url"
 	"os"
 	"os/signal"
+	"strings"
 
 	gomcp "github.com/modelcontextprotocol/go-sdk/mcp"
 
@@ -16,14 +18,33 @@ import (
 var Version = "dev"
 
 func main() {
+	// HTTPS-Everywhere (v2.2): the server is HTTPS-only. The default URL
+	// uses https://; plaintext http:// is rejected by validateHTTPSScheme
+	// below with a fail-loud pre-flight diagnostic pointing at
+	// docs/upgrade-to-tls.md, so operators never get a TCP-refused or
+	// TLS-handshake-error downstream. See docs/tls.md for CA bundle and
+	// insecure-skip-verify guidance.
 	serverURL := os.Getenv("CERTCTL_SERVER_URL")
 	if serverURL == "" {
-		serverURL = "http://localhost:8443"
+		serverURL = "https://localhost:8443"
+	}
+
+	if err := validateHTTPSScheme(serverURL); err != nil {
+		fmt.Fprintf(os.Stderr, "Error: %v\n", err)
+		fmt.Fprintf(os.Stderr, "\nThe certctl control plane is HTTPS-only as of v2.2.\n")
+		fmt.Fprintf(os.Stderr, "See docs/upgrade-to-tls.md for the cutover walkthrough.\n")
+		os.Exit(1)
 	}
 
 	apiKey := os.Getenv("CERTCTL_API_KEY")
+	caBundlePath := os.Getenv("CERTCTL_SERVER_CA_BUNDLE_PATH")
+	insecure := strings.EqualFold(os.Getenv("CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY"), "true")
 
-	client := mcp.NewClient(serverURL, apiKey)
+	client, err := mcp.NewClient(serverURL, apiKey, caBundlePath, insecure)
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "Error: %v\n", err)
+		os.Exit(1)
+	}
 
 	server := gomcp.NewServer(&gomcp.Implementation{
 		Name:    "certctl",
@@ -41,3 +62,26 @@ func main() {
 		log.Fatalf("MCP server error: %v", err)
 	}
 }
+
+// validateHTTPSScheme rejects plaintext and empty-scheme server URLs at
+// startup so operators get a fail-loud diagnostic before any network call,
+// not a TCP-refused or TLS-handshake-error downstream. See docs/upgrade-to-tls.md.
+func validateHTTPSScheme(serverURL string) error {
+	if serverURL == "" {
+		return fmt.Errorf("server URL is empty — set CERTCTL_SERVER_URL to an https:// URL (e.g., https://certctl-server:8443)")
+	}
+	u, err := url.Parse(serverURL)
+	if err != nil {
+		return fmt.Errorf("server URL %q is not a valid URL: %w", serverURL, err)
+	}
+	switch strings.ToLower(u.Scheme) {
+	case "https":
+		return nil
+	case "http":
+		return fmt.Errorf("server URL %q uses plaintext http:// — the certctl control plane is HTTPS-only", serverURL)
+	case "":
+		return fmt.Errorf("server URL %q is missing a scheme — expected https://", serverURL)
+	default:
+		return fmt.Errorf("server URL %q uses unsupported scheme %q — expected https://", serverURL, u.Scheme)
+	}
+}

cmd/mcp-server/main_test.go

@@ -0,0 +1,90 @@
+package main
+
+import (
+	"strings"
+	"testing"
+)
+
+// TestValidateHTTPSScheme pins the pre-flight URL-scheme guard that the
+// HTTPS-Everywhere milestone (v2.2, §3.2) requires on the MCP server binary
+// startup path. The whole point is to fail loud with a diagnostic that points
+// at docs/upgrade-to-tls.md *before* any network call — not a cryptic
+// TCP-refused or TLS-handshake-error two ticks later. Every case here mirrors
+// the dispatch arms in cmd/mcp-server/main.go:validateHTTPSScheme; drifting
+// the error-message substrings is what this test is here to catch.
+func TestValidateHTTPSScheme(t *testing.T) {
+	tests := []struct {
+		name       string
+		serverURL  string
+		wantErr    bool
+		wantErrSub string // substring that MUST appear in the error message
+	}{
+		{
+			name:      "https URL passes",
+			serverURL: "https://certctl-server:8443",
+			wantErr:   false,
+		},
+		{
+			name:      "https URL with path passes",
+			serverURL: "https://certctl.example.com/api/v1",
+			wantErr:   false,
+		},
+		{
+			name:      "uppercase HTTPS scheme passes (url.Parse lowercases)",
+			serverURL: "HTTPS://certctl-server:8443",
+			wantErr:   false,
+		},
+		{
+			name:       "empty URL rejected",
+			serverURL:  "",
+			wantErr:    true,
+			wantErrSub: "server URL is empty",
+		},
+		{
+			name:       "plaintext http rejected",
+			serverURL:  "http://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "plaintext http://",
+		},
+		{
+			name:       "bare host missing scheme rejected",
+			serverURL:  "localhost:8443",
+			wantErr:    true,
+			// url.Parse treats "localhost:8443" as scheme=localhost, opaque=8443
+			// — exercises the default arm (unsupported scheme) rather than the
+			// empty-scheme arm. Both are fail-closed, which is what we care about.
+			wantErrSub: "unsupported scheme",
+		},
+		{
+			name:       "path-only URL rejected",
+			serverURL:  "//certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "missing a scheme",
+		},
+		{
+			name:       "unsupported scheme rejected",
+			serverURL:  "ftp://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "unsupported scheme",
+		},
+		{
+			name:       "ws scheme rejected",
+			serverURL:  "ws://certctl-server:8443",
+			wantErr:    true,
+			wantErrSub: "unsupported scheme",
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			err := validateHTTPSScheme(tt.serverURL)
+			if (err != nil) != tt.wantErr {
+				t.Fatalf("validateHTTPSScheme(%q) err=%v wantErr=%v", tt.serverURL, err, tt.wantErr)
+			}
+			if tt.wantErr && tt.wantErrSub != "" && !strings.Contains(err.Error(), tt.wantErrSub) {
+				t.Errorf("validateHTTPSScheme(%q) err=%q must contain %q so operators see the right diagnostic",
+					tt.serverURL, err.Error(), tt.wantErrSub)
+			}
+		})
+	}
+}

cmd/server/finalhandler_test.go

@@ -0,0 +1,314 @@
+package main
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+)
+
+// TestBuildFinalHandler_Dispatch is the M-001 regression harness for the outer
+// HTTP dispatch layer. It pins which path prefixes ride the no-auth middleware
+// chain (EST, SCEP, /.well-known/pki, health/ready, /api/v1/auth/info) versus
+// the authenticated chain (/api/v1/*).
+//
+// The concern under test is ONLY the dispatch in buildFinalHandler — the
+// handlers themselves are mocked as marker handlers that stamp "AUTH" or
+// "NOAUTH" into the response body. Service-layer concerns (SCEP password
+// validation, EST CSR validation, API auth enforcement) are covered by their
+// respective test suites.
+//
+// Case (i) is the central guard: EST with NO client cert / NO Bearer token
+// MUST reach the no-auth handler (pre-M-001 it was 401'd by the Auth
+// middleware, blocking enrollment for every real-world EST client).
+func TestBuildFinalHandler_Dispatch(t *testing.T) {
+	// Marker handlers — each stamps a unique body so tests can verify which
+	// chain the request traversed.
+	authHandler := http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		w.Header().Set("X-Chain", "auth")
+		w.WriteHeader(http.StatusOK)
+		_, _ = w.Write([]byte("AUTH"))
+	})
+	noAuthHandler := http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		w.Header().Set("X-Chain", "noauth")
+		w.WriteHeader(http.StatusOK)
+		_, _ = w.Write([]byte("NOAUTH"))
+	})
+
+	// Dashboard directory with index.html + assets/ for SPA fallback and
+	// static-asset tests. Cleaned up by t.TempDir.
+	webDir := t.TempDir()
+	indexHTML := []byte("<!doctype html><html><body>certctl dashboard</body></html>")
+	if err := os.WriteFile(filepath.Join(webDir, "index.html"), indexHTML, 0o644); err != nil {
+		t.Fatalf("write index.html: %v", err)
+	}
+	assetsDir := filepath.Join(webDir, "assets")
+	if err := os.MkdirAll(assetsDir, 0o755); err != nil {
+		t.Fatalf("mkdir assets: %v", err)
+	}
+	assetJS := []byte("console.log('certctl');")
+	if err := os.WriteFile(filepath.Join(assetsDir, "app.js"), assetJS, 0o644); err != nil {
+		t.Fatalf("write app.js: %v", err)
+	}
+
+	handler := buildFinalHandler(authHandler, noAuthHandler, webDir, true /* dashboardEnabled */)
+
+	tests := []struct {
+		name           string
+		method         string
+		path           string
+		wantBody       string // "AUTH" | "NOAUTH" | "" (== substring match against response body)
+		wantBodyPrefix string
+		wantStatus     int
+		description    string
+	}{
+		// ---- Case (i): M-001 central regression guard ----
+		{
+			name:        "est_cacerts_no_auth_reaches_noauth_handler",
+			method:      http.MethodGet,
+			path:        "/.well-known/est/cacerts",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "EST clients cannot present Bearer tokens — must NOT be 401'd before reaching the handler (RFC 7030 §4.1.1)",
+		},
+		{
+			name:        "est_simpleenroll_no_auth_reaches_noauth_handler",
+			method:      http.MethodPost,
+			path:        "/.well-known/est/simpleenroll",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "RFC 7030 §4.2 simpleenroll served from no-auth chain (option D)",
+		},
+		{
+			name:        "est_simplereenroll_no_auth_reaches_noauth_handler",
+			method:      http.MethodPost,
+			path:        "/.well-known/est/simplereenroll",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "RFC 7030 §4.2.2 simplereenroll also on no-auth chain",
+		},
+		{
+			name:        "est_csrattrs_no_auth_reaches_noauth_handler",
+			method:      http.MethodGet,
+			path:        "/.well-known/est/csrattrs",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "RFC 7030 §4.5 csrattrs also on no-auth chain",
+		},
+
+		// ---- Cases (ii) + (iii): SCEP dispatch ----
+		// The actual challengePassword validation lives in the service layer
+		// (internal/service/scep.go). This test pins that ALL /scep* requests
+		// reach the no-auth chain — the service layer is then responsible for
+		// rejecting or accepting based on password contents.
+		{
+			name:        "scep_exact_path_reaches_noauth_handler",
+			method:      http.MethodGet,
+			path:        "/scep",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "SCEP clients authenticate via CSR challengePassword, not Bearer (RFC 8894 §3.2)",
+		},
+		{
+			name:        "scep_subpath_reaches_noauth_handler",
+			method:      http.MethodPost,
+			path:        "/scep/",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "Trailing-slash variant must also ride no-auth chain",
+		},
+		{
+			name:        "scep_query_string_reaches_noauth_handler",
+			method:      http.MethodGet,
+			path:        "/scep?operation=GetCACaps",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "Query string does not affect dispatch — operation dispatch is handler-internal",
+		},
+		// Defensive: /scepxyz MUST NOT match the SCEP prefix (guards against
+		// over-broad matching that would leak non-SCEP paths into no-auth).
+		{
+			name:        "scepxyz_does_not_match_scep_prefix",
+			method:      http.MethodGet,
+			path:        "/scepxyz",
+			wantStatus:  http.StatusOK,
+			wantBody:    "certctl dashboard",
+			description: "SPA fallback — /scepxyz must not be confused with /scep or /scep/",
+		},
+
+		// ---- Case (iv): RFC 5280 CRL + RFC 6960 OCSP ----
+		{
+			name:        "pki_crl_no_auth_reaches_noauth_handler",
+			method:      http.MethodGet,
+			path:        "/.well-known/pki/crl/abc123",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "RFC 5280 CRL distribution point must be served without auth",
+		},
+		{
+			name:        "pki_ocsp_no_auth_reaches_noauth_handler",
+			method:      http.MethodGet,
+			path:        "/.well-known/pki/ocsp/abc123/serial",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "RFC 6960 OCSP responder must be served without auth",
+		},
+
+		// ---- Case (v): Authenticated API routes ----
+		{
+			name:        "api_v1_certificates_goes_through_auth",
+			method:      http.MethodGet,
+			path:        "/api/v1/certificates",
+			wantBody:    "AUTH",
+			wantStatus:  http.StatusOK,
+			description: "Primary API surface must still require Bearer token",
+		},
+		{
+			name:        "api_v1_auth_check_goes_through_auth",
+			method:      http.MethodGet,
+			path:        "/api/v1/auth/check",
+			wantBody:    "AUTH",
+			wantStatus:  http.StatusOK,
+			description: "auth/check validates the caller's Bearer — auth chain required",
+		},
+		{
+			name:        "api_v1_jobs_goes_through_auth",
+			method:      http.MethodGet,
+			path:        "/api/v1/jobs",
+			wantBody:    "AUTH",
+			wantStatus:  http.StatusOK,
+			description: "Jobs API is part of the privileged surface",
+		},
+
+		// ---- Health probes bypass auth ----
+		{
+			name:        "health_bypasses_auth",
+			method:      http.MethodGet,
+			path:        "/health",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "Docker/K8s health probes cannot carry Bearer tokens",
+		},
+		{
+			name:        "ready_bypasses_auth",
+			method:      http.MethodGet,
+			path:        "/ready",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "Readiness probe also unauthenticated",
+		},
+		{
+			name:        "auth_info_bypasses_auth",
+			method:      http.MethodGet,
+			path:        "/api/v1/auth/info",
+			wantBody:    "NOAUTH",
+			wantStatus:  http.StatusOK,
+			description: "React app calls auth/info BEFORE login to discover auth mode",
+		},
+
+		// ---- Static assets served by file server ----
+		{
+			name:        "static_asset_served_by_file_server",
+			method:      http.MethodGet,
+			path:        "/assets/app.js",
+			wantStatus:  http.StatusOK,
+			wantBody:    "console.log('certctl');",
+			description: "Built Vite assets served directly without auth",
+		},
+
+		// ---- SPA fallback ----
+		{
+			name:        "spa_fallback_serves_index_html",
+			method:      http.MethodGet,
+			path:        "/",
+			wantStatus:  http.StatusOK,
+			wantBody:    "certctl dashboard",
+			description: "Root path serves SPA entry point",
+		},
+		{
+			name:        "spa_fallback_for_unknown_route",
+			method:      http.MethodGet,
+			path:        "/certificates",
+			wantStatus:  http.StatusOK,
+			wantBody:    "certctl dashboard",
+			description: "React Router routes fall through to index.html",
+		},
+		{
+			name:        "spa_fallback_deep_route",
+			method:      http.MethodGet,
+			path:        "/certificates/mc-api-prod/detail",
+			wantStatus:  http.StatusOK,
+			wantBody:    "certctl dashboard",
+			description: "Deep React Router routes also fall through to SPA",
+		},
+	}
+
+	for _, tc := range tests {
+		t.Run(tc.name, func(t *testing.T) {
+			req := httptest.NewRequest(tc.method, tc.path, nil)
+			w := httptest.NewRecorder()
+			handler.ServeHTTP(w, req)
+
+			if w.Code != tc.wantStatus {
+				t.Errorf("status = %d, want %d (%s)", w.Code, tc.wantStatus, tc.description)
+			}
+			body := w.Body.String()
+			if tc.wantBody != "" && !strings.Contains(body, tc.wantBody) {
+				t.Errorf("body %q does not contain %q (%s)", body, tc.wantBody, tc.description)
+			}
+			if tc.wantBodyPrefix != "" && !strings.HasPrefix(body, tc.wantBodyPrefix) {
+				t.Errorf("body %q does not start with %q (%s)", body, tc.wantBodyPrefix, tc.description)
+			}
+		})
+	}
+}
+
+// TestBuildFinalHandler_NoDashboard pins the API-only (dashboard-absent)
+// dispatch behavior. When web/dist/index.html is missing, everything that's
+// not a no-auth bypass route falls through to the authenticated apiHandler
+// (pre-M-001 behavior for headless deployments). EST/SCEP/PKI still ride the
+// no-auth chain.
+func TestBuildFinalHandler_NoDashboard(t *testing.T) {
+	authHandler := http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		w.WriteHeader(http.StatusOK)
+		_, _ = w.Write([]byte("AUTH"))
+	})
+	noAuthHandler := http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		w.WriteHeader(http.StatusOK)
+		_, _ = w.Write([]byte("NOAUTH"))
+	})
+
+	handler := buildFinalHandler(authHandler, noAuthHandler, "/nonexistent", false /* dashboardEnabled */)
+
+	tests := []struct {
+		name     string
+		path     string
+		wantBody string
+	}{
+		{"est_still_no_auth", "/.well-known/est/cacerts", "NOAUTH"},
+		{"scep_still_no_auth", "/scep", "NOAUTH"},
+		{"pki_still_no_auth", "/.well-known/pki/crl/x", "NOAUTH"},
+		{"health_still_no_auth", "/health", "NOAUTH"},
+		{"api_still_auth", "/api/v1/certificates", "AUTH"},
+		// The difference: non-API, non-special paths go through auth chain when
+		// there's no dashboard to serve (preserves legacy headless behavior).
+		{"unknown_path_falls_through_to_auth", "/", "AUTH"},
+		{"unknown_deep_path_falls_through_to_auth", "/random/path", "AUTH"},
+	}
+
+	for _, tc := range tests {
+		t.Run(tc.name, func(t *testing.T) {
+			req := httptest.NewRequest(http.MethodGet, tc.path, nil)
+			w := httptest.NewRecorder()
+			handler.ServeHTTP(w, req)
+			if w.Code != http.StatusOK {
+				t.Errorf("status = %d, want 200", w.Code)
+			}
+			if got := w.Body.String(); !strings.Contains(got, tc.wantBody) {
+				t.Errorf("body = %q, want to contain %q", got, tc.wantBody)
+			}
+		})
+	}
+}

cmd/server/main.go

@@ -9,6 +9,7 @@ import (
 	"os"
 	"os/signal"
 	"strconv"
+	"strings"
 	"syscall"
 	"time"
 
@@ -16,7 +17,6 @@ import (
 	"github.com/shankar0123/certctl/internal/api/middleware"
 	"github.com/shankar0123/certctl/internal/api/router"
 	"github.com/shankar0123/certctl/internal/config"
-	"github.com/shankar0123/certctl/internal/domain"
 	discoveryawssm "github.com/shankar0123/certctl/internal/connector/discovery/awssm"
 	discoveryazurekv "github.com/shankar0123/certctl/internal/connector/discovery/azurekv"
 	discoverygcpsm "github.com/shankar0123/certctl/internal/connector/discovery/gcpsm"
@@ -25,6 +25,7 @@ import (
 	notifypagerduty "github.com/shankar0123/certctl/internal/connector/notifier/pagerduty"
 	notifyslack "github.com/shankar0123/certctl/internal/connector/notifier/slack"
 	notifyteams "github.com/shankar0123/certctl/internal/connector/notifier/teams"
+	"github.com/shankar0123/certctl/internal/domain"
 	"github.com/shankar0123/certctl/internal/repository/postgres"
 	"github.com/shankar0123/certctl/internal/scheduler"
 	"github.com/shankar0123/certctl/internal/service"
@@ -38,6 +39,26 @@ func main() {
 		os.Exit(1)
 	}
 
+	// Defense-in-depth runtime guard for the auth-type discriminator.
+	//
+	// G-1 (P1): config.Load() already runs Validate() which rejects "jwt"
+	// and any value outside config.ValidAuthTypes() with a dedicated
+	// diagnostic. This switch is belt-and-braces — if a future refactor
+	// bypasses the validator (test harness, alt config loader, env-var
+	// rebinding after Load) the server must not silently boot with an
+	// unsupported auth shape. The error path uses fmt.Fprintf because
+	// the slog logger is constructed from cfg below this point; we want
+	// the failure to be visible regardless of log-level configuration.
+	switch config.AuthType(cfg.Auth.Type) {
+	case config.AuthTypeAPIKey, config.AuthTypeNone:
+		// ok — fall through
+	default:
+		fmt.Fprintf(os.Stderr,
+			"unsupported auth type at runtime: %q (valid: %v) — config validation should have caught this; refusing to start\n",
+			cfg.Auth.Type, config.ValidAuthTypes())
+		os.Exit(1)
+	}
+
 	// Set up structured logging
 	logger := slog.New(slog.NewJSONHandler(os.Stdout, &slog.HandlerOptions{
 		Level: cfg.GetLogLevel(),
@@ -65,6 +86,41 @@ func main() {
 	}
 	logger.Info("migrations completed")
 
+	// Apply baseline seed data.
+	//
+	// U-3 (P1, cat-u-seed_initdb_schema_drift): pre-U-3 seed.sql was mounted
+	// into postgres `/docker-entrypoint-initdb.d/` alongside a hand-curated
+	// subset of migrations. Adding a migration that introduced a new column
+	// referenced by seed.sql (cat-o-retry_interval_unit_mismatch /
+	// policy_rules.severity / etc.) without also updating the compose volume
+	// mounts caused initdb to crash on first up. Post-U-3 the compose stack
+	// drops all initdb mounts; postgres comes up with empty schema, the
+	// server runs RunMigrations above, then this RunSeed call lands the
+	// baseline data — all from a single source of truth (this binary).
+	// See internal/repository/postgres/db.go::RunSeed for the contract.
+	logger.Info("applying baseline seed", "path", cfg.Database.MigrationsPath)
+	if err := postgres.RunSeed(db, cfg.Database.MigrationsPath); err != nil {
+		logger.Error("failed to apply seed data", "error", err)
+		os.Exit(1)
+	}
+	logger.Info("seed completed")
+
+	// Apply demo overlay seed when CERTCTL_DEMO_SEED=true. Pre-U-3 the demo
+	// overlay (deploy/docker-compose.demo.yml) mounted seed_demo.sql into
+	// postgres `/docker-entrypoint-initdb.d/`; that broke once U-3 dropped
+	// the initdb migration mounts (the demo seed references tables that
+	// wouldn't exist at initdb time). The runtime path here is the
+	// post-U-3 replacement. Default-off so a vanilla deploy never lands
+	// fake-history rows. See postgres.RunDemoSeed for the contract.
+	if cfg.Database.DemoSeed {
+		logger.Info("applying demo seed (CERTCTL_DEMO_SEED=true)", "path", cfg.Database.MigrationsPath)
+		if err := postgres.RunDemoSeed(db, cfg.Database.MigrationsPath); err != nil {
+			logger.Error("failed to apply demo seed data", "error", err)
+			os.Exit(1)
+		}
+		logger.Info("demo seed completed")
+	}
+
 	// Initialize repositories with real PostgreSQL connection
 	auditRepo := postgres.NewAuditRepository(db)
 	certificateRepo := postgres.NewCertificateRepository(db)
@@ -145,6 +201,12 @@ func main() {
 	// Initialize services (following the dependency graph)
 	auditService := service.NewAuditService(auditRepo)
 	policyService := service.NewPolicyService(policyRepo, auditService)
+	policyService.SetCertRepo(certificateRepo) // D-008: CertificateLifetime arm needs CertificateVersion.NotBefore/NotAfter
+	// G-1: RenewalPolicyService — distinct from PolicyService (compliance rules).
+	// Drives /api/v1/renewal-policies CRUD; the service layer owns slugify + validation,
+	// the repo layer owns sentinel translation for 23505 (name UNIQUE) and 23503
+	// (FK-RESTRICT against managed_certificates.renewal_policy_id).
+	renewalPolicyService := service.NewRenewalPolicyService(renewalPolicyRepo)
 	certificateService := service.NewCertificateService(certificateRepo, policyService, auditService)
 	notifierRegistry := make(map[string]service.Notifier)
 
@@ -222,7 +284,10 @@ func main() {
 	renewalService := service.NewRenewalService(certificateRepo, jobRepo, renewalPolicyRepo, profileRepo, auditService, notificationService, issuerRegistry, cfg.Keygen.Mode)
 	renewalService.SetTargetRepo(targetRepo)
 	deploymentService := service.NewDeploymentService(jobRepo, targetRepo, agentRepo, certificateRepo, auditService, notificationService)
-	jobService := service.NewJobService(jobRepo, renewalService, deploymentService, logger)
+	jobService := service.NewJobService(jobRepo, certificateRepo, ownerRepo, renewalService, deploymentService, logger)
+	// I-001: emit "job_retry" audit events when the scheduler resets Failed→Pending.
+	// SetAuditService is optional — JobService falls back to nil-guarded no-op if unwired.
+	jobService.SetAuditService(auditService)
 	agentService := service.NewAgentService(agentRepo, certificateRepo, jobRepo, targetRepo, auditService, issuerRegistry, renewalService)
 	agentService.SetProfileRepo(profileRepo)
 	issuerService := service.NewIssuerService(issuerRepo, auditService, issuerRegistry, encryptionKey, logger)
@@ -348,6 +413,12 @@ func main() {
 
 	// Initialize stats and metrics services
 	statsService := service.NewStatsService(certificateRepo, jobRepo, agentRepo)
+	// I-005: wire the notification repository so DashboardSummary.NotificationsDead
+	// is populated, which in turn drives the Prometheus counter
+	// certctl_notification_dead_total in GetPrometheusMetrics. Setter
+	// pattern keeps NewStatsService's nine call sites (main.go + stats_test.go
+	// + 8 digest_test.go sites) untouched.
+	statsService.SetNotifRepo(notificationRepo)
 	logger.Info("initialized stats service")
 
 	// Initialize API handlers
@@ -357,6 +428,10 @@ func main() {
 	agentHandler := handler.NewAgentHandler(agentService)
 	jobHandler := handler.NewJobHandler(jobService)
 	policyHandler := handler.NewPolicyHandler(policyService)
+	// G-1: RenewalPolicyHandler — /api/v1/renewal-policies CRUD. Value-returning
+	// constructor matches the house pattern (PolicyHandler, IssuerHandler etc.);
+	// the registry stores it by value in HandlerRegistry.RenewalPolicies.
+	renewalPolicyHandler := handler.NewRenewalPolicyHandler(renewalPolicyService)
 	profileHandler := handler.NewProfileHandler(profileService)
 	teamHandler := handler.NewTeamHandler(teamService)
 	ownerHandler := handler.NewOwnerHandler(ownerService)
@@ -366,6 +441,13 @@ func main() {
 	statsHandler := handler.NewStatsHandler(statsService)
 	metricsHandler := handler.NewMetricsHandler(statsService, time.Now())
 	healthHandler := handler.NewHealthHandler(cfg.Auth.Type)
+	// U-3 ride-along (cat-u-no_version_endpoint, P2): the version handler
+	// answers GET /api/v1/version with build identity (ldflags Version,
+	// VCS commit/dirty/timestamp, Go runtime version). Wired through the
+	// no-auth dispatch + audit ExcludePaths below so probes and rollout
+	// systems can read it without Bearer credentials and without flooding
+	// the audit trail.
+	versionHandler := handler.NewVersionHandler()
 	discoveryHandler := handler.NewDiscoveryHandler(discoveryService)
 	networkScanHandler := handler.NewNetworkScanHandler(networkScanService)
 	verificationService := service.NewVerificationService(jobRepo, auditService, logger)
@@ -436,8 +518,20 @@ func main() {
 	// Configure scheduler intervals from config
 	sched.SetRenewalCheckInterval(cfg.Scheduler.RenewalCheckInterval)
 	sched.SetJobProcessorInterval(cfg.Scheduler.JobProcessorInterval)
+	// I-001: drive the failed-job retry loop. Runs on start + every RetryInterval
+	// (default 5m, CERTCTL_SCHEDULER_RETRY_INTERVAL). Kept adjacent to the job
+	// processor setter because they share the JobServicer dependency.
+	sched.SetJobRetryInterval(cfg.Scheduler.RetryInterval)
 	sched.SetAgentHealthCheckInterval(cfg.Scheduler.AgentHealthCheckInterval)
 	sched.SetNotificationProcessInterval(cfg.Scheduler.NotificationProcessInterval)
+	// I-005: drive the failed-notification retry sweep. Runs every
+	// NotificationRetryInterval (default 2m, CERTCTL_NOTIFICATION_RETRY_INTERVAL)
+	// and transitions eligible Failed notifications whose next_retry_at has
+	// arrived back to Pending so the notification processor picks them up on
+	// its next tick. Kept adjacent to the notification processor setter
+	// because they share the NotificationServicer dependency (same placement
+	// pattern as I-001's SetJobRetryInterval above).
+	sched.SetNotificationRetryInterval(cfg.Scheduler.NotificationRetryInterval)
 	if cfg.NetworkScan.Enabled {
 		sched.SetNetworkScanInterval(cfg.NetworkScan.ScanInterval)
 		logger.Info("network scanning enabled", "interval", cfg.NetworkScan.ScanInterval.String())
@@ -460,6 +554,16 @@ func main() {
 			"sources", cloudDiscoveryService.SourceCount())
 	}
 
+	// Wire job timeout reaper (I-003)
+	sched.SetJobReaperService(jobService)
+	sched.SetJobTimeoutInterval(cfg.Scheduler.JobTimeoutInterval)
+	sched.SetAwaitingCSRTimeout(cfg.Scheduler.AwaitingCSRTimeout)
+	sched.SetAwaitingApprovalTimeout(cfg.Scheduler.AwaitingApprovalTimeout)
+	logger.Info("job timeout reaper enabled",
+		"interval", cfg.Scheduler.JobTimeoutInterval.String(),
+		"csr_timeout", cfg.Scheduler.AwaitingCSRTimeout.String(),
+		"approval_timeout", cfg.Scheduler.AwaitingApprovalTimeout.String())
+
 	// Start scheduler
 	logger.Info("starting scheduler")
 	startedChan := sched.Start(ctx)
@@ -469,28 +573,30 @@ func main() {
 	// Build the API router with all handlers
 	apiRouter := router.New()
 	apiRouter.RegisterHandlers(router.HandlerRegistry{
-		Certificates:  certificateHandler,
-		Issuers:       issuerHandler,
-		Targets:       targetHandler,
-		Agents:        agentHandler,
-		Jobs:          jobHandler,
-		Policies:      policyHandler,
-		Profiles:      profileHandler,
-		Teams:         teamHandler,
-		Owners:        ownerHandler,
-		AgentGroups:   agentGroupHandler,
-		Audit:         auditHandler,
-		Notifications: notificationHandler,
-		Stats:         statsHandler,
-		Metrics:       metricsHandler,
-		Health:        healthHandler,
-		Discovery:     discoveryHandler,
-		NetworkScan:   networkScanHandler,
-		Verification:  verificationHandler,
-		Export:        exportHandler,
-		Digest:        *digestHandler,
-		HealthChecks:     healthCheckHandler,
-		BulkRevocation:   bulkRevocationHandler,
+		Certificates:   certificateHandler,
+		Issuers:        issuerHandler,
+		Targets:        targetHandler,
+		Agents:         agentHandler,
+		Jobs:           jobHandler,
+		Policies:       policyHandler,
+		RenewalPolicies: renewalPolicyHandler,
+		Profiles:       profileHandler,
+		Teams:          teamHandler,
+		Owners:         ownerHandler,
+		AgentGroups:    agentGroupHandler,
+		Audit:          auditHandler,
+		Notifications:  notificationHandler,
+		Stats:          statsHandler,
+		Metrics:        metricsHandler,
+		Health:         healthHandler,
+		Discovery:      discoveryHandler,
+		NetworkScan:    networkScanHandler,
+		Verification:   verificationHandler,
+		Export:         exportHandler,
+		Digest:         *digestHandler,
+		HealthChecks:   healthCheckHandler,
+		BulkRevocation: bulkRevocationHandler,
+		Version:        versionHandler,
 	})
 	// Register EST (RFC 7030) handlers if enabled
 	if cfg.EST.Enabled {
@@ -551,13 +657,63 @@ func main() {
 			"endpoints", "/scep?operation={GetCACaps,GetCACert,PKIOperation}")
 	}
 
+	// Register RFC 5280 CRL and RFC 6960 OCSP handlers under /.well-known/pki/.
+	// These are always enabled (no config gate) — revocation data must be
+	// reachable to relying parties for any cert certctl issues. The finalHandler
+	// routing gate below strips auth middleware for this prefix so browsers,
+	// OpenSSL, OCSP stapling sidecars, and mTLS clients can fetch without
+	// presenting certctl Bearer tokens.
+	apiRouter.RegisterPKIHandlers(certificateHandler)
+	logger.Info("PKI endpoints registered",
+		"endpoints", "/.well-known/pki/{crl/{issuer_id},ocsp/{issuer_id}/{serial}}")
+
 	logger.Info("registered all API handlers")
 
-	// Build middleware stack
-	authMiddleware := middleware.NewAuth(middleware.AuthConfig{
-		Type:   cfg.Auth.Type,
-		Secret: cfg.Auth.Secret,
-	})
+	// Build middleware stack.
+	//
+	// Authentication unification (M-002): every authenticated request now
+	// carries a named actor in the request context so audit events record
+	// the real key identity instead of the hardcoded "api-key-user" string.
+	// Named keys come from CERTCTL_API_KEYS_NAMED (preferred). For backward
+	// compatibility CERTCTL_AUTH_SECRET is synthesized into legacy-key-N
+	// entries with Admin=false.
+	var namedKeys []middleware.NamedAPIKey
+	if config.AuthType(cfg.Auth.Type) != config.AuthTypeNone {
+		// Translate typed config.NamedAPIKey -> middleware.NamedAPIKey. The
+		// two structs are field-compatible but live in different packages to
+		// preserve the config→middleware dependency direction.
+		for _, nk := range cfg.Auth.NamedKeys {
+			namedKeys = append(namedKeys, middleware.NamedAPIKey{
+				Name:  nk.Name,
+				Key:   nk.Key,
+				Admin: nk.Admin,
+			})
+		}
+		// Back-compat: if no named keys but legacy Secret is configured,
+		// synthesize named entries so the audit trail still attributes the
+		// action (instead of falling back to "api-key-user" / "anonymous").
+		if len(namedKeys) == 0 && cfg.Auth.Secret != "" {
+			parts := strings.Split(cfg.Auth.Secret, ",")
+			idx := 0
+			for _, p := range parts {
+				p = strings.TrimSpace(p)
+				if p == "" {
+					continue
+				}
+				namedKeys = append(namedKeys, middleware.NamedAPIKey{
+					Name:  fmt.Sprintf("legacy-key-%d", idx),
+					Key:   p,
+					Admin: false,
+				})
+				idx++
+			}
+			if len(namedKeys) > 0 {
+				logger.Warn("CERTCTL_AUTH_SECRET is deprecated — set CERTCTL_API_KEYS_NAMED for named actor attribution and admin gating",
+					"synthesized_keys", len(namedKeys))
+			}
+		}
+	}
+	authMiddleware := middleware.NewAuthWithNamedKeys(namedKeys)
 	corsMiddleware := middleware.NewCORS(middleware.CORSConfig{
 		AllowedOrigins: cfg.CORS.AllowedOrigins,
 	})
@@ -577,10 +733,15 @@ func main() {
 		},
 	)
 	auditMiddleware := middleware.NewAuditLog(auditAdapter, middleware.AuditConfig{
-		ExcludePaths: []string{"/health", "/ready"},
+		// /api/v1/version is excluded for the same reason /health and /ready
+		// are: rollout systems and blackbox probes hammer it on a tight
+		// interval, and the audit trail's value comes from rare,
+		// operator-authored mutations — not from sub-second readonly polls.
+		// U-3 ride-along (cat-u-no_version_endpoint, P2).
+		ExcludePaths: []string{"/health", "/ready", "/api/v1/version"},
 		Logger:       logger,
 	})
-	logger.Info("API audit logging enabled (excluding /health, /ready)")
+	logger.Info("API audit logging enabled (excluding /health, /ready, /api/v1/version)")
 
 	middlewareStack := []func(http.Handler) http.Handler{
 		middleware.RequestID,
@@ -611,8 +772,8 @@ func main() {
 		logger.Info("rate limiting enabled", "rps", cfg.RateLimit.RPS, "burst", cfg.RateLimit.BurstSize)
 	}
 
-	if cfg.Auth.Type == "none" {
-		logger.Warn("authentication disabled (CERTCTL_AUTH_TYPE=none) — not suitable for production")
+	if config.AuthType(cfg.Auth.Type) == config.AuthTypeNone {
+		logger.Warn("authentication disabled (CERTCTL_AUTH_TYPE=none) — not suitable for production except behind an authenticating gateway (oauth2-proxy / Envoy ext_authz / Traefik ForwardAuth / Pomerium)")
 	} else {
 		logger.Info("authentication enabled", "type", cfg.Auth.Type)
 	}
@@ -642,61 +803,65 @@ func main() {
 		middleware.Recovery,
 	)
 
+	dashboardEnabled := false
 	if _, err := os.Stat(webDir + "/index.html"); err == nil {
-		fileServer := http.FileServer(http.Dir(webDir))
-		finalHandler = http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
-			path := r.URL.Path
-			// Health/ready and auth/info bypass auth middleware.
-			// Health/ready: Docker/K8s health probes don't carry Bearer tokens.
-			// auth/info: React app calls this before login to detect auth mode.
-			if path == "/health" || path == "/ready" || path == "/api/v1/auth/info" {
-				noAuthHandler.ServeHTTP(w, r)
-				return
-			}
-			// All other API and EST routes go through the full middleware stack (with auth)
-			if (len(path) >= 8 && path[:8] == "/api/v1/") ||
-				(len(path) >= 16 && path[:16] == "/.well-known/est") {
-				apiHandler.ServeHTTP(w, r)
-				return
-			}
-			// Try to serve static files (JS, CSS, assets)
-			if len(path) > 8 && path[:8] == "/assets/" {
-				fileServer.ServeHTTP(w, r)
-				return
-			}
-			// SPA fallback: serve index.html for all other routes
-			http.ServeFile(w, r, webDir+"/index.html")
-		})
+		dashboardEnabled = true
+	}
+	finalHandler = buildFinalHandler(apiHandler, noAuthHandler, webDir, dashboardEnabled)
+	if dashboardEnabled {
 		logger.Info("dashboard available at /", "web_dir", webDir)
 	} else {
-		// No dashboard: route health/auth-info without auth, everything else through full stack
-		finalHandler = http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
-			path := r.URL.Path
-			if path == "/health" || path == "/ready" || path == "/api/v1/auth/info" {
-				noAuthHandler.ServeHTTP(w, r)
-				return
-			}
-			apiHandler.ServeHTTP(w, r)
-		})
 		logger.Info("dashboard directory not found, serving API only")
 	}
 
+	// HTTPS-everywhere milestone §2.1: fail-loud if the TLS configuration is
+	// missing or malformed. Duplicates config.Validate() for defense in depth
+	// (same pattern as preflightSCEPChallengePassword).
+	if err := preflightServerTLS(cfg.Server.TLS.CertPath, cfg.Server.TLS.KeyPath); err != nil {
+		logger.Error("startup refused: HTTPS cert unusable; control plane is HTTPS-only",
+			"error", err,
+			"cert_path", cfg.Server.TLS.CertPath,
+			"key_path", cfg.Server.TLS.KeyPath)
+		os.Exit(1)
+	}
+
+	// Load the cert+key into a SIGHUP-reloadable holder. Any subsequent
+	// SIGHUP triggers a fresh read and atomic swap so rotations do not need
+	// a restart. Reload failures keep the previous cert and log a warning.
+	tlsCertHolder, err := newCertHolder(cfg.Server.TLS.CertPath, cfg.Server.TLS.KeyPath)
+	if err != nil {
+		logger.Error("startup refused: failed to load TLS cert holder",
+			"error", err,
+			"cert_path", cfg.Server.TLS.CertPath,
+			"key_path", cfg.Server.TLS.KeyPath)
+		os.Exit(1)
+	}
+	stopTLSWatcher := tlsCertHolder.watchSIGHUP(logger)
+	defer stopTLSWatcher()
+
 	// Server configuration
 	addr := net.JoinHostPort(cfg.Server.Host, strconv.Itoa(cfg.Server.Port))
 	httpServer := &http.Server{
 		Addr:              addr,
 		Handler:           finalHandler,
+		TLSConfig:         buildServerTLSConfig(tlsCertHolder),
 		ReadTimeout:       30 * time.Second,
 		ReadHeaderTimeout: 5 * time.Second,
 		WriteTimeout:      120 * time.Second, // Must accommodate ACME issuance (order + challenge + finalize)
 		IdleTimeout:       60 * time.Second,
 	}
 
-	// Start HTTP server in background
-	logger.Info("starting HTTP server", "address", addr)
+	// Start HTTPS server in background. ListenAndServeTLS is called with
+	// empty cert+key arguments because the cert is sourced through
+	// TLSConfig.GetCertificate (the SIGHUP-reloadable holder). Passing file
+	// paths here would pin the first-loaded cert and defeat hot reload.
+	logger.Info("HTTPS server listening",
+		"address", addr,
+		"cert_path", cfg.Server.TLS.CertPath,
+		"min_version", "TLS1.3")
 	go func() {
-		if err := httpServer.ListenAndServe(); err != nil && err != http.ErrServerClosed {
-			logger.Error("HTTP server error", "error", err)
+		if err := httpServer.ListenAndServeTLS("", ""); err != nil && err != http.ErrServerClosed {
+			logger.Error("HTTPS server error", "error", err)
 		}
 	}()
 
@@ -719,9 +884,9 @@ func main() {
 		logger.Warn("scheduler work did not complete in time", "error", err)
 	}
 
-	logger.Info("shutting down HTTP server")
+	logger.Info("shutting down HTTPS server")
 	if err := httpServer.Shutdown(shutdownCtx); err != nil {
-		logger.Error("HTTP server shutdown error", "error", err)
+		logger.Error("HTTPS server shutdown error", "error", err)
 	}
 
 	// Drain in-flight audit-recording goroutines before closing the DB pool.
@@ -763,3 +928,97 @@ func preflightSCEPChallengePassword(enabled bool, challengePassword string) erro
 	return nil
 }
 
+// buildFinalHandler builds the outer HTTP dispatch handler that routes incoming
+// requests to either the authenticated apiHandler chain or the unauthenticated
+// noAuthHandler chain based on URL path prefix. Extracted from main() so the
+// dispatch logic can be unit tested without booting the full server stack
+// (see cmd/server/finalhandler_test.go).
+//
+// Dispatch rules (M-001, audit 2026-04-19, option D):
+//
+//   - /health, /ready, /api/v1/auth/info           → no-auth (probes + login detection)
+//   - /api/v1/version                              → no-auth (U-3 ride-along: build identity for rollout/probes)
+//   - /.well-known/pki/*                           → no-auth (RFC 5280 CRL, RFC 6960 OCSP)
+//   - /.well-known/est/*                           → no-auth (RFC 7030 §3.2.3)
+//   - /scep, /scep/*                               → no-auth (RFC 8894 §3.2, CSR challengePassword)
+//   - /api/v1/*                                    → auth (Bearer token required)
+//   - /assets/*                                    → static file server (dashboard only)
+//   - anything else                                → SPA index.html fallback (dashboard only)
+//                                                    OR apiHandler (no dashboard)
+//
+// EST/SCEP clients (IoT devices, 802.1X supplicants, MDM endpoints, network
+// appliances) cannot present certctl Bearer tokens, so those endpoints must be
+// reachable without the Auth middleware. Authentication is instead enforced by
+// CSR signature verification, profile policy gates, and for SCEP the
+// challengePassword shared secret (fail-loud gated by preflightSCEPChallengePassword
+// above).
+//
+// webDir must point to a directory containing index.html + assets/ when
+// dashboardEnabled is true; it is ignored otherwise.
+func buildFinalHandler(apiHandler, noAuthHandler http.Handler, webDir string, dashboardEnabled bool) http.Handler {
+	var fileServer http.Handler
+	if dashboardEnabled {
+		fileServer = http.FileServer(http.Dir(webDir))
+	}
+	return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		path := r.URL.Path
+
+		// Health/ready, auth/info, and version bypass auth middleware.
+		// Health/ready: Docker/K8s health probes don't carry Bearer tokens.
+		// auth/info: React app calls this before login to detect auth mode.
+		// version: U-3 ride-along (cat-u-no_version_endpoint) — rollout
+		// systems and blackbox probes need build identity without a key.
+		if path == "/health" || path == "/ready" || path == "/api/v1/auth/info" || path == "/api/v1/version" {
+			noAuthHandler.ServeHTTP(w, r)
+			return
+		}
+
+		// RFC 5280 CRL and RFC 6960 OCSP live under /.well-known/pki/ and MUST
+		// be served unauthenticated — relying parties (browsers, OpenSSL, OCSP
+		// stapling sidecars, mTLS clients) cannot present certctl Bearer tokens.
+		if strings.HasPrefix(path, "/.well-known/pki") {
+			noAuthHandler.ServeHTTP(w, r)
+			return
+		}
+
+		// RFC 7030 EST endpoints ride the no-auth middleware chain (M-001,
+		// option D, audit 2026-04-19). Trust boundary is CSR signature + profile
+		// policy, not HTTP Bearer. /.well-known/est/cacerts is explicitly
+		// anonymous per RFC 7030 §4.1.1.
+		if strings.HasPrefix(path, "/.well-known/est") {
+			noAuthHandler.ServeHTTP(w, r)
+			return
+		}
+
+		// RFC 8894 SCEP rides the no-auth chain (M-001, option D). SCEP clients
+		// authenticate via the challengePassword attribute in the PKCS#10 CSR,
+		// not via HTTP Bearer tokens. preflightSCEPChallengePassword refuses to
+		// start the server if SCEP is enabled without a non-empty shared secret.
+		if path == "/scep" || strings.HasPrefix(path, "/scep/") {
+			noAuthHandler.ServeHTTP(w, r)
+			return
+		}
+
+		// Authenticated API routes — full middleware stack including Auth.
+		if strings.HasPrefix(path, "/api/v1/") {
+			apiHandler.ServeHTTP(w, r)
+			return
+		}
+
+		if !dashboardEnabled {
+			// No dashboard: everything non-special falls through to the
+			// authenticated handler (preserves pre-M-001 behavior for API-only
+			// deployments).
+			apiHandler.ServeHTTP(w, r)
+			return
+		}
+
+		// Dashboard-present: serve static assets directly, SPA fallback for
+		// everything else.
+		if strings.HasPrefix(path, "/assets/") {
+			fileServer.ServeHTTP(w, r)
+			return
+		}
+		http.ServeFile(w, r, webDir+"/index.html")
+	})
+}

cmd/server/main_test.go

@@ -214,6 +214,8 @@ func TestMain_ServerConfigFromEnvironment(t *testing.T) {
 	oldAuthType := os.Getenv("CERTCTL_AUTH_TYPE")
 	oldServerHost := os.Getenv("CERTCTL_SERVER_HOST")
 	oldServerPort := os.Getenv("CERTCTL_SERVER_PORT")
+	oldTLSCert := os.Getenv("CERTCTL_SERVER_TLS_CERT_PATH")
+	oldTLSKey := os.Getenv("CERTCTL_SERVER_TLS_KEY_PATH")
 	defer func() {
 		if oldAuthType != "" {
 			os.Setenv("CERTCTL_AUTH_TYPE", oldAuthType)
@@ -230,12 +232,32 @@ func TestMain_ServerConfigFromEnvironment(t *testing.T) {
 		} else {
 			os.Unsetenv("CERTCTL_SERVER_PORT")
 		}
+		if oldTLSCert != "" {
+			os.Setenv("CERTCTL_SERVER_TLS_CERT_PATH", oldTLSCert)
+		} else {
+			os.Unsetenv("CERTCTL_SERVER_TLS_CERT_PATH")
+		}
+		if oldTLSKey != "" {
+			os.Setenv("CERTCTL_SERVER_TLS_KEY_PATH", oldTLSKey)
+		} else {
+			os.Unsetenv("CERTCTL_SERVER_TLS_KEY_PATH")
+		}
 	}()
 
+	// HTTPS-only control plane: Validate() refuses to pass without a readable
+	// cert/key pair on disk. Materialize a throwaway ECDSA P-256 pair using the
+	// same generator cmd/server/tls_test.go uses for the certHolder tests.
+	dir := t.TempDir()
+	certPath := dir + "/server.crt"
+	keyPath := dir + "/server.key"
+	generateTestCert(t, certPath, keyPath, "main-test-cn")
+
 	// Set test env vars
 	os.Setenv("CERTCTL_AUTH_TYPE", "none")
 	os.Setenv("CERTCTL_SERVER_HOST", "127.0.0.1")
 	os.Setenv("CERTCTL_SERVER_PORT", "8080")
+	os.Setenv("CERTCTL_SERVER_TLS_CERT_PATH", certPath)
+	os.Setenv("CERTCTL_SERVER_TLS_KEY_PATH", keyPath)
 
 	cfg, err := config.Load()
 	if err != nil {
@@ -260,6 +282,8 @@ func TestMain_AuthTypeConfiguration(t *testing.T) {
 	// Save original env vars
 	oldAuthType := os.Getenv("CERTCTL_AUTH_TYPE")
 	oldAuthSecret := os.Getenv("CERTCTL_AUTH_SECRET")
+	oldTLSCert := os.Getenv("CERTCTL_SERVER_TLS_CERT_PATH")
+	oldTLSKey := os.Getenv("CERTCTL_SERVER_TLS_KEY_PATH")
 	defer func() {
 		if oldAuthType != "" {
 			os.Setenv("CERTCTL_AUTH_TYPE", oldAuthType)
@@ -271,8 +295,28 @@ func TestMain_AuthTypeConfiguration(t *testing.T) {
 		} else {
 			os.Unsetenv("CERTCTL_AUTH_SECRET")
 		}
+		if oldTLSCert != "" {
+			os.Setenv("CERTCTL_SERVER_TLS_CERT_PATH", oldTLSCert)
+		} else {
+			os.Unsetenv("CERTCTL_SERVER_TLS_CERT_PATH")
+		}
+		if oldTLSKey != "" {
+			os.Setenv("CERTCTL_SERVER_TLS_KEY_PATH", oldTLSKey)
+		} else {
+			os.Unsetenv("CERTCTL_SERVER_TLS_KEY_PATH")
+		}
 	}()
 
+	// HTTPS-only control plane: config.Load()→Validate() refuses to pass
+	// without a readable cert/key pair. Mint one throwaway pair for the whole
+	// sub-test cohort — auth type toggles don't care about the TLS surface.
+	dir := t.TempDir()
+	certPath := dir + "/server.crt"
+	keyPath := dir + "/server.key"
+	generateTestCert(t, certPath, keyPath, "main-test-cn")
+	os.Setenv("CERTCTL_SERVER_TLS_CERT_PATH", certPath)
+	os.Setenv("CERTCTL_SERVER_TLS_KEY_PATH", keyPath)
+
 	// Set auth secret for api-key mode
 	os.Setenv("CERTCTL_AUTH_SECRET", "test-secret")
 

cmd/server/tls.go

@@ -0,0 +1,164 @@
+package main
+
+import (
+	"crypto/tls"
+	"fmt"
+	"log/slog"
+	"os"
+	"os/signal"
+	"sync"
+	"syscall"
+)
+
+// certHolder stores the server's TLS certificate under a mutex so it can be
+// swapped atomically by a SIGHUP handler without restarting the server. A
+// *tls.Config that wires GetCertificate → (*certHolder).GetCertificate reads
+// through the holder on every ClientHello, so a successful reload takes
+// effect on the next new connection immediately and without dropping
+// in-flight requests.
+//
+// Concurrency: GetCertificate is invoked from crypto/tls handshake goroutines
+// on every new inbound connection; Reload is invoked from the SIGHUP watcher
+// goroutine. sync.Mutex is sufficient — TLS handshakes are not an inner-loop
+// hot path and the critical section is a single pointer read.
+type certHolder struct {
+	mu       sync.Mutex
+	cert     *tls.Certificate
+	certPath string
+	keyPath  string
+}
+
+// newCertHolder loads the initial cert+key pair from disk and returns a
+// holder ready to serve handshakes. Returns a non-nil error if either file
+// is missing, unreadable, or the pair does not round-trip through
+// tls.LoadX509KeyPair (for example the key does not sign the cert). The
+// caller is expected to treat a non-nil error as a fail-loud startup gate
+// and os.Exit(1) — the HTTPS-everywhere milestone (§3 locked decisions)
+// prohibits plaintext HTTP fallback.
+func newCertHolder(certPath, keyPath string) (*certHolder, error) {
+	cert, err := tls.LoadX509KeyPair(certPath, keyPath)
+	if err != nil {
+		return nil, fmt.Errorf("load TLS cert/key (cert=%q key=%q): %w", certPath, keyPath, err)
+	}
+	return &certHolder{
+		cert:     &cert,
+		certPath: certPath,
+		keyPath:  keyPath,
+	}, nil
+}
+
+// GetCertificate is the tls.Config.GetCertificate hook. Returns the current
+// cert under the holder's mutex. ClientHelloInfo is ignored — the control
+// plane does not multiplex by SNI.
+func (h *certHolder) GetCertificate(_ *tls.ClientHelloInfo) (*tls.Certificate, error) {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+	return h.cert, nil
+}
+
+// Reload re-reads the cert+key pair from disk and swaps the holder
+// atomically on success. On failure the holder retains its previous cert
+// and the error is propagated to the caller — the SIGHUP watcher logs and
+// keeps serving the previous cert rather than crashing on a bad reload.
+// This is deliberately "fail-safe on reload, fail-loud on startup": an
+// operator rotating certs wants a recoverable error, not a restart loop.
+func (h *certHolder) Reload() error {
+	cert, err := tls.LoadX509KeyPair(h.certPath, h.keyPath)
+	if err != nil {
+		return fmt.Errorf("reload TLS cert/key (cert=%q key=%q): %w", h.certPath, h.keyPath, err)
+	}
+	h.mu.Lock()
+	h.cert = &cert
+	h.mu.Unlock()
+	return nil
+}
+
+// watchSIGHUP installs a signal handler that calls Reload() on each SIGHUP.
+// The returned stop function closes the internal done channel and stops
+// signal delivery so the goroutine can exit cleanly during shutdown. Errors
+// from Reload are logged but do not terminate the watcher — the operator
+// can fix the files and send another SIGHUP.
+//
+// Defensive design note: this deliberately does NOT panic on Reload error
+// even though HTTPS is mission-critical. A rotation that writes half-files
+// (operator overwrites cert.pem then key.pem as two separate copies) would
+// otherwise crash the server mid-rotation. Logging + retaining the old
+// cert gives the operator a bounded window to fix and re-SIGHUP.
+func (h *certHolder) watchSIGHUP(logger *slog.Logger) (stop func()) {
+	ch := make(chan os.Signal, 1)
+	signal.Notify(ch, syscall.SIGHUP)
+	done := make(chan struct{})
+	go func() {
+		for {
+			select {
+			case <-ch:
+				if err := h.Reload(); err != nil {
+					logger.Error("TLS cert reload failed; continuing with previous cert",
+						"error", err,
+						"cert_path", h.certPath,
+						"key_path", h.keyPath)
+					continue
+				}
+				logger.Info("TLS cert reloaded via SIGHUP",
+					"cert_path", h.certPath,
+					"key_path", h.keyPath)
+			case <-done:
+				signal.Stop(ch)
+				return
+			}
+		}
+	}()
+	return func() { close(done) }
+}
+
+// buildServerTLSConfig returns the TLS 1.3-only *tls.Config for the HTTPS
+// server. Pinned per HTTPS-everywhere milestone §2.1 + §3 locked decisions:
+//
+//   - MinVersion: TLS 1.3 (no TLS 1.2 escape hatch). Go 1.25's crypto/tls
+//     automatically rejects older versions.
+//   - CurvePreferences: explicit [X25519, P-256]. Explicit ordering keeps
+//     the handshake deterministic and documents the accepted curves.
+//   - No CipherSuites field: TLS 1.3 cipher suites are not negotiable in
+//     the handshake (all three mandatory suites — AES-128-GCM-SHA256,
+//     AES-256-GCM-SHA384, CHACHA20-POLY1305-SHA256 — are always offered).
+//     Go's crypto/tls ignores CipherSuites for TLS 1.3.
+//   - GetCertificate: reads through the holder so SIGHUP rotations take
+//     effect on the next new connection without a restart. Setting
+//     tls.Config.Certificates directly would pin the first-loaded cert
+//     and defeat SIGHUP reload.
+func buildServerTLSConfig(holder *certHolder) *tls.Config {
+	return &tls.Config{
+		MinVersion:       tls.VersionTLS13,
+		CurvePreferences: []tls.CurveID{tls.X25519, tls.CurveP256},
+		GetCertificate:   holder.GetCertificate,
+	}
+}
+
+// preflightServerTLS is the fail-loud startup gate for HTTPS. Returns a
+// non-nil error when the TLS configuration is missing or the cert+key pair
+// cannot be parsed, so the caller refuses to start the control plane
+// (HTTPS-everywhere §3 locked decisions: no plaintext HTTP fallback).
+//
+// Duplicates the emptiness + stat + parse checks in config.Validate() for
+// defense in depth, mirroring the pattern established by
+// preflightSCEPChallengePassword (which itself duplicates
+// config.Validate()'s SCEP check for CWE-306). Extracted into a separate
+// function so the gate is unit-testable without booting the full server.
+func preflightServerTLS(certPath, keyPath string) error {
+	if certPath == "" {
+		return fmt.Errorf("CERTCTL_SERVER_TLS_CERT_PATH is empty: HTTPS-only control plane refuses to start (see docs/tls.md)")
+	}
+	if keyPath == "" {
+		return fmt.Errorf("CERTCTL_SERVER_TLS_KEY_PATH is empty: HTTPS-only control plane refuses to start (see docs/tls.md)")
+	}
+	if _, err := os.Stat(certPath); err != nil {
+		return fmt.Errorf("TLS cert file %q unreadable: %w (see docs/tls.md)", certPath, err)
+	}
+	if _, err := os.Stat(keyPath); err != nil {
+		return fmt.Errorf("TLS key file %q unreadable: %w (see docs/tls.md)", keyPath, err)
+	}
+	if _, err := tls.LoadX509KeyPair(certPath, keyPath); err != nil {
+		return fmt.Errorf("TLS cert/key pair invalid (cert=%q key=%q): %w (see docs/tls.md)", certPath, keyPath, err)
+	}
+	return nil
+}

cmd/server/tls_test.go

@@ -0,0 +1,418 @@
+package main
+
+import (
+	"crypto/ecdsa"
+	"crypto/elliptic"
+	"crypto/rand"
+	"crypto/tls"
+	"crypto/x509"
+	"crypto/x509/pkix"
+	"encoding/pem"
+	"errors"
+	"io"
+	"log/slog"
+	"math/big"
+	"net"
+	"os"
+	"path/filepath"
+	"sync"
+	"syscall"
+	"testing"
+	"time"
+)
+
+// generateTestCert writes a PEM-encoded self-signed leaf cert + ECDSA P-256
+// key pair to certPath/keyPath. The subject is derived from cn so tests can
+// tell reloaded certs apart from original certs by re-parsing the served
+// Certificate and comparing the CN.
+func generateTestCert(t *testing.T, certPath, keyPath, cn string) {
+	t.Helper()
+	priv, err := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
+	if err != nil {
+		t.Fatalf("ecdsa.GenerateKey: %v", err)
+	}
+	tmpl := &x509.Certificate{
+		SerialNumber: big.NewInt(time.Now().UnixNano()),
+		Subject:      pkix.Name{CommonName: cn},
+		NotBefore:    time.Now().Add(-1 * time.Hour),
+		NotAfter:     time.Now().Add(24 * time.Hour),
+		KeyUsage:     x509.KeyUsageDigitalSignature,
+		ExtKeyUsage:  []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth},
+		DNSNames:     []string{"localhost"},
+		IPAddresses:  []net.IP{net.ParseIP("127.0.0.1"), net.ParseIP("::1")},
+	}
+	der, err := x509.CreateCertificate(rand.Reader, tmpl, tmpl, &priv.PublicKey, priv)
+	if err != nil {
+		t.Fatalf("x509.CreateCertificate: %v", err)
+	}
+	certPEM := pem.EncodeToMemory(&pem.Block{Type: "CERTIFICATE", Bytes: der})
+	keyDER, err := x509.MarshalECPrivateKey(priv)
+	if err != nil {
+		t.Fatalf("MarshalECPrivateKey: %v", err)
+	}
+	keyPEM := pem.EncodeToMemory(&pem.Block{Type: "EC PRIVATE KEY", Bytes: keyDER})
+	if err := os.WriteFile(certPath, certPEM, 0o600); err != nil {
+		t.Fatalf("write cert: %v", err)
+	}
+	if err := os.WriteFile(keyPath, keyPEM, 0o600); err != nil {
+		t.Fatalf("write key: %v", err)
+	}
+}
+
+// readCertCN returns the CommonName from the leaf cert currently held by the
+// holder, by exercising the same GetCertificate path the tls handshake would
+// take. Lets tests assert which generation of the cert is being served.
+func readCertCN(t *testing.T, h *certHolder) string {
+	t.Helper()
+	c, err := h.GetCertificate(&tls.ClientHelloInfo{})
+	if err != nil {
+		t.Fatalf("GetCertificate: %v", err)
+	}
+	leaf, err := x509.ParseCertificate(c.Certificate[0])
+	if err != nil {
+		t.Fatalf("ParseCertificate: %v", err)
+	}
+	return leaf.Subject.CommonName
+}
+
+func silentLogger() *slog.Logger {
+	return slog.New(slog.NewTextHandler(io.Discard, &slog.HandlerOptions{Level: slog.LevelError}))
+}
+
+func TestNewCertHolder_ValidPair_LoadsCert(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-initial")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+	if got := readCertCN(t, h); got != "cn-initial" {
+		t.Fatalf("CN mismatch: got %q want %q", got, "cn-initial")
+	}
+}
+
+func TestNewCertHolder_MissingFile_Fails(t *testing.T) {
+	_, err := newCertHolder("/nonexistent/cert.pem", "/nonexistent/key.pem")
+	if err == nil {
+		t.Fatal("expected error for missing files, got nil")
+	}
+}
+
+func TestNewCertHolder_MalformedCert_Fails(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "bad.crt")
+	keyPath := filepath.Join(dir, "bad.key")
+	if err := os.WriteFile(certPath, []byte("not a pem cert"), 0o600); err != nil {
+		t.Fatalf("write cert: %v", err)
+	}
+	if err := os.WriteFile(keyPath, []byte("not a pem key"), 0o600); err != nil {
+		t.Fatalf("write key: %v", err)
+	}
+	_, err := newCertHolder(certPath, keyPath)
+	if err == nil {
+		t.Fatal("expected error for malformed PEM, got nil")
+	}
+}
+
+func TestCertHolder_Reload_SwapsCert(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-v1")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+	if got := readCertCN(t, h); got != "cn-v1" {
+		t.Fatalf("initial CN: got %q want cn-v1", got)
+	}
+
+	// Rotate on disk and reload.
+	generateTestCert(t, certPath, keyPath, "cn-v2")
+	if err := h.Reload(); err != nil {
+		t.Fatalf("Reload: %v", err)
+	}
+	if got := readCertCN(t, h); got != "cn-v2" {
+		t.Fatalf("post-reload CN: got %q want cn-v2", got)
+	}
+}
+
+func TestCertHolder_Reload_FailureRetainsPreviousCert(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-v1")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+
+	// Corrupt the cert file and attempt reload.
+	if err := os.WriteFile(certPath, []byte("garbage"), 0o600); err != nil {
+		t.Fatalf("corrupt cert: %v", err)
+	}
+	if err := h.Reload(); err == nil {
+		t.Fatal("expected Reload error for corrupt file, got nil")
+	}
+	// Holder should still serve the v1 cert.
+	if got := readCertCN(t, h); got != "cn-v1" {
+		t.Fatalf("post-failed-reload CN: got %q want cn-v1 (reload must not clobber on failure)", got)
+	}
+}
+
+func TestCertHolder_GetCertificate_Concurrent(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-concurrent")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+
+	// 64 readers + 1 rotator for 500ms. Race detector catches any unsynchronized
+	// swap of h.cert. Rotator writes fresh files + Reload, readers call
+	// GetCertificate in a tight loop.
+	var wg sync.WaitGroup
+	done := make(chan struct{})
+	const readers = 64
+	for i := 0; i < readers; i++ {
+		wg.Add(1)
+		go func() {
+			defer wg.Done()
+			for {
+				select {
+				case <-done:
+					return
+				default:
+					if _, err := h.GetCertificate(&tls.ClientHelloInfo{}); err != nil {
+						t.Errorf("GetCertificate: %v", err)
+						return
+					}
+				}
+			}
+		}()
+	}
+	wg.Add(1)
+	go func() {
+		defer wg.Done()
+		for i := 0; i < 20; i++ {
+			generateTestCert(t, certPath, keyPath, "cn-concurrent")
+			_ = h.Reload()
+			time.Sleep(10 * time.Millisecond)
+		}
+	}()
+	time.Sleep(300 * time.Millisecond)
+	close(done)
+	wg.Wait()
+}
+
+func TestCertHolder_WatchSIGHUP_ReloadsOnSignal(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-before-sighup")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+	stop := h.watchSIGHUP(silentLogger())
+	defer stop()
+
+	// Rotate on disk, then fire SIGHUP to our own process and poll for the swap.
+	generateTestCert(t, certPath, keyPath, "cn-after-sighup")
+	if err := syscall.Kill(syscall.Getpid(), syscall.SIGHUP); err != nil {
+		t.Fatalf("SIGHUP: %v", err)
+	}
+	deadline := time.Now().Add(2 * time.Second)
+	for time.Now().Before(deadline) {
+		if readCertCN(t, h) == "cn-after-sighup" {
+			return
+		}
+		time.Sleep(10 * time.Millisecond)
+	}
+	t.Fatalf("watcher did not reload cert within 2s (CN still %q)", readCertCN(t, h))
+}
+
+func TestCertHolder_WatchSIGHUP_StopExits(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-stop")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+	stop := h.watchSIGHUP(silentLogger())
+
+	// Closing should be synchronous and safe; a subsequent SIGHUP must not
+	// cause a reload (the watcher goroutine is gone).
+	stop()
+	time.Sleep(50 * time.Millisecond) // let goroutine exit
+
+	// After stop, the signal may still be delivered to the process but the
+	// watcher has called signal.Stop so this channel is no longer receiving.
+	// Simply assert that calling stop() twice does not panic — the goroutine
+	// has already exited, so a second close would panic on the `done`
+	// channel; we do NOT call stop twice. Instead verify no regression in
+	// the held cert.
+	if got := readCertCN(t, h); got != "cn-stop" {
+		t.Fatalf("unexpected cert rotation after stop: got %q want cn-stop", got)
+	}
+}
+
+func TestBuildServerTLSConfig_IsTLS13Only(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-cfg")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+	cfg := buildServerTLSConfig(h)
+	if cfg.MinVersion != tls.VersionTLS13 {
+		t.Fatalf("MinVersion: got %#x want %#x (TLS 1.3)", cfg.MinVersion, tls.VersionTLS13)
+	}
+	wantCurves := []tls.CurveID{tls.X25519, tls.CurveP256}
+	if len(cfg.CurvePreferences) != len(wantCurves) {
+		t.Fatalf("CurvePreferences length: got %d want %d", len(cfg.CurvePreferences), len(wantCurves))
+	}
+	for i, c := range cfg.CurvePreferences {
+		if c != wantCurves[i] {
+			t.Fatalf("CurvePreferences[%d]: got %v want %v", i, c, wantCurves[i])
+		}
+	}
+	if cfg.GetCertificate == nil {
+		t.Fatal("GetCertificate: nil (holder not wired; SIGHUP reload would be broken)")
+	}
+	if len(cfg.Certificates) != 0 {
+		t.Fatalf("Certificates: got %d want 0 (static cert would pin the first load and defeat reload)", len(cfg.Certificates))
+	}
+}
+
+func TestBuildServerTLSConfig_Handshake_TLS12Rejected(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-handshake")
+
+	h, err := newCertHolder(certPath, keyPath)
+	if err != nil {
+		t.Fatalf("newCertHolder: %v", err)
+	}
+	serverCfg := buildServerTLSConfig(h)
+
+	ln, err := tls.Listen("tcp", "127.0.0.1:0", serverCfg)
+	if err != nil {
+		t.Fatalf("tls.Listen: %v", err)
+	}
+	defer ln.Close()
+
+	// Server loop: accept and immediately close (we only care about the
+	// handshake outcome).
+	go func() {
+		for {
+			conn, err := ln.Accept()
+			if err != nil {
+				return
+			}
+			// Force handshake so the server-side error surfaces.
+			_ = conn.(*tls.Conn).Handshake()
+			conn.Close()
+		}
+	}()
+
+	// TLS 1.3 client — should succeed.
+	clientOK := &tls.Config{
+		MinVersion:         tls.VersionTLS13,
+		MaxVersion:         tls.VersionTLS13,
+		InsecureSkipVerify: true,
+	}
+	c, err := tls.Dial("tcp", ln.Addr().String(), clientOK)
+	if err != nil {
+		t.Fatalf("TLS 1.3 dial failed (expected success): %v", err)
+	}
+	if c.ConnectionState().Version != tls.VersionTLS13 {
+		t.Fatalf("negotiated version: got %#x want TLS 1.3 (%#x)", c.ConnectionState().Version, tls.VersionTLS13)
+	}
+	c.Close()
+
+	// TLS 1.2 client — must be rejected at handshake.
+	clientOld := &tls.Config{
+		MinVersion:         tls.VersionTLS12,
+		MaxVersion:         tls.VersionTLS12,
+		InsecureSkipVerify: true,
+	}
+	if _, err := tls.Dial("tcp", ln.Addr().String(), clientOld); err == nil {
+		t.Fatal("TLS 1.2 dial succeeded; HTTPS-everywhere requires server to refuse TLS 1.2")
+	}
+}
+
+func TestPreflightServerTLS_MissingCertPath(t *testing.T) {
+	err := preflightServerTLS("", "/any/key.pem")
+	if err == nil {
+		t.Fatal("expected error for empty cert path, got nil")
+	}
+}
+
+func TestPreflightServerTLS_MissingKeyPath(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-preflight")
+	err := preflightServerTLS(certPath, "")
+	if err == nil {
+		t.Fatal("expected error for empty key path, got nil")
+	}
+}
+
+func TestPreflightServerTLS_CertFileNotReadable(t *testing.T) {
+	dir := t.TempDir()
+	keyPath := filepath.Join(dir, "tls.key")
+	if err := os.WriteFile(keyPath, []byte("k"), 0o600); err != nil {
+		t.Fatal(err)
+	}
+	err := preflightServerTLS(filepath.Join(dir, "nope.crt"), keyPath)
+	if err == nil {
+		t.Fatal("expected error for unreadable cert path, got nil")
+	}
+	if !errors.Is(err, os.ErrNotExist) {
+		t.Fatalf("expected os.ErrNotExist wrapped in error chain, got: %v", err)
+	}
+}
+
+func TestPreflightServerTLS_InvalidKeyPair(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	// Pair of valid cert + garbage key — files are readable but the pair
+	// doesn't round-trip tls.LoadX509KeyPair.
+	generateTestCert(t, certPath, keyPath, "cn-bad-pair")
+	if err := os.WriteFile(keyPath, []byte("-----BEGIN EC PRIVATE KEY-----\nBAD\n-----END EC PRIVATE KEY-----\n"), 0o600); err != nil {
+		t.Fatal(err)
+	}
+	err := preflightServerTLS(certPath, keyPath)
+	if err == nil {
+		t.Fatal("expected error for invalid key pair, got nil")
+	}
+}
+
+func TestPreflightServerTLS_ValidPair_NoError(t *testing.T) {
+	dir := t.TempDir()
+	certPath := filepath.Join(dir, "tls.crt")
+	keyPath := filepath.Join(dir, "tls.key")
+	generateTestCert(t, certPath, keyPath, "cn-ok")
+	if err := preflightServerTLS(certPath, keyPath); err != nil {
+		t.Fatalf("unexpected error for valid pair: %v", err)
+	}
+}

deploy/ENVIRONMENTS.md

@@ -55,7 +55,7 @@ A compose file defines **services** (containers), **networks** (how they talk to
 
 **Overlay files** let you layer changes. Running `docker compose -f base.yml -f overlay.yml up` merges both files. The overlay can add services, change environment variables, or mount extra volumes without editing the base.
 
-**Port mapping** (`"8443:8443"`) maps host port (left) to container port (right). After startup, `http://localhost:8443` on your machine reaches the certctl server inside its container.
+**Port mapping** (`"8443:8443"`) maps host port (left) to container port (right). After startup, `https://localhost:8443` on your machine reaches the certctl server inside its container (HTTPS-only as of v2.2; the `certctl-tls-init` init container bootstraps a self-signed cert into `deploy/test/certs/`).
 
 ---
 
@@ -91,11 +91,13 @@ Wait about 30 seconds, then verify:
 docker compose -f deploy/docker-compose.yml ps
 # All three services should show "Up (healthy)"
 
-curl http://localhost:8443/health
+curl --cacert ./deploy/test/certs/ca.crt https://localhost:8443/health
 # {"status":"healthy"}
 ```
 
-Open **http://localhost:8443** in your browser. You'll see the onboarding wizard guiding you through: connecting a CA, deploying an agent, and adding your first certificate.
+The control plane is HTTPS-only as of v2.2. The `certctl-tls-init` init container bootstraps a self-signed cert into `deploy/test/certs/` on first boot; pin it with `--cacert` (as above) or pass `-k` for one-off smoke tests (never in production).
+
+Open **https://localhost:8443** in your browser. You'll see the onboarding wizard guiding you through: connecting a CA, deploying an agent, and adding your first certificate. Your browser will flag the self-signed cert as untrusted — accept the warning for local evaluation, or import `deploy/test/certs/ca.crt` into your OS trust store to make the warning go away.
 
 ### Service-by-service walkthrough
 
@@ -120,6 +122,8 @@ The `volumes` section mounts 10 migration files into PostgreSQL's init directory
 
 **Expert note:** The numbered prefix pattern (`001_`, `002_`, ..., `020_`) ensures deterministic execution order. All migrations use `IF NOT EXISTS` and `ON CONFLICT DO NOTHING` for idempotency, so re-running them against an existing database is safe.
 
+**Stateful volume — first-boot password binding (U-1).** The same "first boot only" semantics that govern migration scripts also govern `POSTGRES_PASSWORD`. The official `postgres` image runs `initdb` exactly once — when `/var/lib/postgresql/data` is empty — and that pass is the only time `POSTGRES_PASSWORD` is written into `pg_authid`. On every subsequent boot, the postgres container ignores the env var and authenticates against whatever password was baked into the data directory on the original `up`. Editing `POSTGRES_PASSWORD` in `.env` after a successful first boot therefore only updates the **certctl-server** container's `CERTCTL_DATABASE_URL` — postgres still expects the previous password, and the server fails to ping with `pq: password authentication failed for user "certctl"` (SQLSTATE 28P01). The certctl-server container surfaces this case explicitly: when SQLSTATE 28P01 fires at startup, the wrap text in `internal/repository/postgres/db.go::wrapPingError` points operators at the two remediation paths — destructive volume teardown via `docker compose -f deploy/docker-compose.yml down -v && up -d --build`, or non-destructive in-place rotation via `docker compose -f deploy/docker-compose.yml exec postgres psql -U certctl -c "ALTER ROLE certctl PASSWORD '<new>';"` followed by a server restart with the matching `POSTGRES_PASSWORD`. Use the destructive path on the demo / first-time setup; use the non-destructive path on any environment that holds data you want to keep.
+
 #### certctl Server
 
 ```yaml
@@ -307,8 +311,9 @@ docker compose -f deploy/docker-compose.test.yml up --build
 Wait for all health checks to pass (about 60 seconds for step-ca's first-run bootstrap). Then:
 
 ```bash
-# Dashboard with auth enabled
-open http://localhost:8443
+# Dashboard with auth enabled (HTTPS-only as of v2.2; browser will warn on the self-signed cert —
+# accept the warning or trust `deploy/test/certs/ca.crt` in your OS keychain)
+open https://localhost:8443
 # API key: test-key-2026
 
 # NGINX serving a self-signed placeholder

deploy/docker-compose.demo.yml

@@ -7,8 +7,20 @@
 # To start fresh (wipe previous data):
 #   docker compose -f docker-compose.yml -f docker-compose.demo.yml down -v
 #   docker compose -f docker-compose.yml -f docker-compose.demo.yml up --build
-
+#
+# U-3 (P1, cat-u-seed_initdb_schema_drift): pre-U-3 this overlay mounted
+# `seed_demo.sql` into postgres `/docker-entrypoint-initdb.d/`. That worked
+# only because the production stack also mounted the migrations there, so
+# the schema existed at initdb time. Once U-3 dropped the production
+# initdb mounts (single source of truth: server runs RunMigrations + RunSeed
+# at boot), the demo seed could no longer be applied at initdb time — the
+# tables it references wouldn't exist yet.
+#
+# Post-U-3 the demo overlay just sets CERTCTL_DEMO_SEED=true; the server
+# applies seed_demo.sql at boot via postgres.RunDemoSeed AFTER baseline
+# migrations + seed.sql are in place. Same single source of truth, no
+# initdb mounts, no schema-vs-seed drift.
 services:
-  postgres:
-    volumes:
-      - ../migrations/seed_demo.sql:/docker-entrypoint-initdb.d/030_seed_demo.sql
+  certctl-server:
+    environment:
+      CERTCTL_DEMO_SEED: "true"

deploy/docker-compose.test.yml

@@ -4,8 +4,12 @@
 #
 # Spins up the full certctl platform with real CA backends for manual QA:
 #
+#   0. certctl-tls-init     — one-shot init container; writes self-signed
+#                             server.crt/.key/ca.crt into ./test/certs (bind
+#                             mount, not a named volume — host-readable for
+#                             the Go integration test binary)
 #   1. PostgreSQL 16        — database (clean, no demo data)
-#   2. certctl-server       — control plane API + web dashboard on :8443
+#   2. certctl-server       — control plane API + web dashboard on :8443 (HTTPS)
 #   3. certctl-agent        — polls for work, deploys certs to NGINX
 #   4. step-ca              — private CA (JWK provisioner, auto-bootstraps)
 #   5. Pebble               — ACME test server (simulates Let's Encrypt)
@@ -16,18 +20,90 @@
 #   cd deploy
 #   docker compose -f docker-compose.test.yml up --build
 #
-# Dashboard:  http://localhost:8443
+# Dashboard:  https://localhost:8443   (self-signed — use --cacert test/certs/ca.crt)
 # API key:    test-key-2026
 # NGINX:      https://localhost:8444 (self-signed placeholder until cert deployed)
 #
+# Integration tests: `go test -tags integration ./deploy/test/...` picks up
+# the CA bundle at ./test/certs/ca.crt automatically via CERTCTL_TEST_CA_BUNDLE.
+#
 # See docs/test-env.md for the full walkthrough.
 # =============================================================================
 
 services:
 
+  # ---------------------------------------------------------------------------
+  # HTTPS-Everywhere Phase 6 — self-signed TLS bootstrap for the test harness.
+  # ---------------------------------------------------------------------------
+  # Mirrors the production `certctl-tls-init` (see docker-compose.yml §10-43)
+  # but writes into a *host bind mount* (./test/certs) instead of a named
+  # volume. The named-volume approach works fine inside Docker but hides the
+  # CA bundle from the Go integration test binary that runs on the host; the
+  # bind mount exposes /etc/certctl/tls/ca.crt at deploy/test/certs/ca.crt
+  # so `newTestClient()` can load it into an x509.CertPool and validate the
+  # self-signed server cert. Test-only divergence, explicitly documented.
+  #
+  # The generated cert has SAN=DNS:certctl-server,DNS:localhost,IP:127.0.0.1
+  # so both in-cluster traffic (agent → certctl-server:8443) and host traffic
+  # (go test → localhost:8443) validate cleanly. Destroy via
+  # `docker compose -f docker-compose.test.yml down -v` + `rm -rf test/certs`
+  # to force regeneration. Keys written 0600, certs 0644, owned 1000:1000
+  # (the UID the server binary runs as inside its container per Dockerfile:64).
+  certctl-tls-init:
+    image: alpine/openssl:latest
+    container_name: certctl-test-tls-init
+    restart: "no"
+    entrypoint: /bin/sh
+    command:
+      - -c
+      - |
+        set -eu
+        CERT=/etc/certctl/tls/server.crt
+        KEY=/etc/certctl/tls/server.key
+        CA=/etc/certctl/tls/ca.crt
+        if [ -f "$$CERT" ] && [ -f "$$KEY" ] && [ -f "$$CA" ]; then
+          echo "TLS cert already present at $$CERT — skipping generation"
+        else
+          mkdir -p /etc/certctl/tls
+          openssl req -x509 -newkey ec \
+            -pkeyopt ec_paramgen_curve:P-256 \
+            -nodes \
+            -keyout "$$KEY" \
+            -out "$$CERT" \
+            -days 3650 \
+            -subj "/CN=certctl-server" \
+            -addext "subjectAltName=DNS:certctl-server,DNS:localhost,IP:127.0.0.1,IP:::1"
+          cp "$$CERT" "$$CA"
+          echo "Generated self-signed TLS cert for certctl-test-server (ECDSA-P256/SHA-256, 3650d, CN=certctl-server)"
+        fi
+        # The test server container runs as root (see `user: "0:0"` below)
+        # because setup-trust.sh needs to update the system trust store, so
+        # the perms here are really about host-side readability — 0644 on
+        # the CA/cert lets `go test` on the host read the bundle without a
+        # chown dance.
+        chown 1000:1000 "$$CERT" "$$KEY" "$$CA" || true
+        chmod 0644 "$$CERT" "$$CA"
+        chmod 0600 "$$KEY"
+    volumes:
+      - ./test/certs:/etc/certctl/tls
+    networks:
+      certctl-test:
+        ipv4_address: 10.30.50.9
+
   # ---------------------------------------------------------------------------
   # Database
   # ---------------------------------------------------------------------------
+  #
+  # U-3 (P1, cat-u-seed_initdb_schema_drift, GitHub #10): the test stack used
+  # to mount a hand-curated subset of migrations + seed.sql + a never-checked-in
+  # seed_test.sql into postgres `/docker-entrypoint-initdb.d/`. Same hazard as
+  # the production compose — initdb crashed any time a new migration shipped
+  # that the seed depended on without the mount list being updated. Post-U-3
+  # the schema is built EXCLUSIVELY by the server at startup via
+  # internal/repository/postgres.RunMigrations + RunSeed. Postgres comes up
+  # empty and the server lands the full ladder + baseline seed in one shot.
+  # `start_period: 30s` matches the production compose and shields slow CI
+  # runners from healthcheck flap during initdb.
   postgres:
     image: postgres:16-alpine
     container_name: certctl-test-postgres
@@ -37,19 +113,6 @@ services:
       POSTGRES_PASSWORD: testpass
     volumes:
       - test_postgres_data:/var/lib/postgresql/data
-      - ../migrations/000001_initial_schema.up.sql:/docker-entrypoint-initdb.d/001_schema.sql
-      - ../migrations/000002_agent_metadata.up.sql:/docker-entrypoint-initdb.d/002_agent_metadata.sql
-      - ../migrations/000003_certificate_profiles.up.sql:/docker-entrypoint-initdb.d/003_certificate_profiles.sql
-      - ../migrations/000004_agent_groups.up.sql:/docker-entrypoint-initdb.d/004_agent_groups.sql
-      - ../migrations/000005_revocation.up.sql:/docker-entrypoint-initdb.d/005_revocation.sql
-      - ../migrations/000006_discovery.up.sql:/docker-entrypoint-initdb.d/006_discovery.sql
-      - ../migrations/000007_network_discovery.up.sql:/docker-entrypoint-initdb.d/007_network_discovery.sql
-      - ../migrations/000008_verification.up.sql:/docker-entrypoint-initdb.d/008_verification.sql
-      - ../migrations/000009_issuer_config.up.sql:/docker-entrypoint-initdb.d/009_issuer_config.sql
-      - ../migrations/000010_target_config.up.sql:/docker-entrypoint-initdb.d/010_target_config.sql
-      - ../migrations/seed.sql:/docker-entrypoint-initdb.d/020_seed.sql
-      - ../migrations/seed_test.sql:/docker-entrypoint-initdb.d/025_seed_test.sql
-      # No seed_demo.sql — start with a clean database for real testing
     networks:
       certctl-test:
         ipv4_address: 10.30.50.2
@@ -60,6 +123,7 @@ services:
       interval: 5s
       timeout: 5s
       retries: 5
+      start_period: 30s
     restart: unless-stopped
 
   # ---------------------------------------------------------------------------
@@ -168,6 +232,12 @@ services:
         condition: service_started
       step-ca:
         condition: service_healthy
+      # HTTPS-Everywhere Phase 6: block server boot until the init container
+      # has written server.crt / server.key / ca.crt into ./test/certs. The
+      # init container runs once and exits 0; service_completed_successfully
+      # makes that a gating dependency rather than a liveness one.
+      certctl-tls-init:
+        condition: service_completed_successfully
     # Run as root so update-ca-certificates can write to /etc/ssl/certs.
     # Container isolation provides the security boundary.
     user: "0:0"
@@ -179,6 +249,12 @@ services:
       # Server
       CERTCTL_SERVER_HOST: 0.0.0.0
       CERTCTL_SERVER_PORT: 8443
+      # HTTPS-Everywhere Phase 6: point the server at the init-container-generated
+      # cert/key pair (bind-mounted from ./test/certs). Same paths as production
+      # compose so the server binary code path is identical; only the host-side
+      # storage differs (bind mount vs named volume — see §certctl-tls-init block).
+      CERTCTL_SERVER_TLS_CERT_PATH: /etc/certctl/tls/server.crt
+      CERTCTL_SERVER_TLS_KEY_PATH: /etc/certctl/tls/server.key
       CERTCTL_LOG_LEVEL: debug
 
       # Auth — API key required (production-like)
@@ -224,12 +300,22 @@ services:
       - ./test/setup-trust.sh:/app/setup-trust.sh:ro
       # step-ca data volume (root cert at /certs/root_ca.crt, key at /secrets/provisioner_key)
       - stepca_data:/stepca-data:ro
+      # HTTPS-Everywhere Phase 6: read-only bind mount of the init-generated
+      # TLS material. The init container writes here; server reads here; the
+      # agent mounts the same host path at the same container path (see below)
+      # so /etc/certctl/tls/ca.crt resolves to the *same* bytes on both sides.
+      - ./test/certs:/etc/certctl/tls:ro
     networks:
       certctl-test:
         ipv4_address: 10.30.50.6
     healthcheck:
-      # /health requires auth when CERTCTL_AUTH_TYPE=api-key, so include the Bearer token
-      test: ["CMD", "curl", "-f", "-H", "Authorization: Bearer test-key-2026", "http://localhost:8443/health"]
+      # HTTPS-Everywhere Phase 6: healthcheck now speaks TLS with --cacert to
+      # verify the self-signed server cert against the init-generated bundle.
+      # /health requires auth when CERTCTL_AUTH_TYPE=api-key, so include the
+      # Bearer token. curl exits non-zero on both TLS handshake failure and
+      # non-2xx status — either failure keeps depends_on: {condition:
+      # service_healthy} from unblocking the agent, which is what we want.
+      test: ["CMD", "curl", "--cacert", "/etc/certctl/tls/ca.crt", "-f", "-H", "Authorization: Bearer test-key-2026", "https://localhost:8443/health"]
       interval: 10s
       timeout: 5s
       start_period: 30s
@@ -290,7 +376,13 @@ services:
       certctl-server:
         condition: service_healthy
     environment:
-      CERTCTL_SERVER_URL: http://certctl-server:8443
+      # HTTPS-Everywhere Phase 6: agent dials the server over TLS and validates
+      # the self-signed cert against the CA bundle pinned by
+      # CERTCTL_SERVER_CA_BUNDLE_PATH. Same env vars + container paths as
+      # production compose so the agent binary code path (loadCABundle →
+      # x509.CertPool → *tls.Config{RootCAs, MinVersion: TLS13}) is identical.
+      CERTCTL_SERVER_URL: https://certctl-server:8443
+      CERTCTL_SERVER_CA_BUNDLE_PATH: /etc/certctl/tls/ca.crt
       CERTCTL_API_KEY: test-key-2026
       CERTCTL_AGENT_NAME: test-agent-01
       CERTCTL_AGENT_ID: agent-test-01
@@ -300,6 +392,10 @@ services:
     volumes:
       - agent_keys:/var/lib/certctl/keys
       - nginx_certs:/nginx-certs
+      # HTTPS-Everywhere Phase 6: same bind mount as the server, same path,
+      # so /etc/certctl/tls/ca.crt resolves to the identical bytes. This is
+      # the only way the CN=certctl-server cert validates on the agent side.
+      - ./test/certs:/etc/certctl/tls:ro
     networks:
       certctl-test:
         ipv4_address: 10.30.50.8

deploy/docker-compose.yml

@@ -1,5 +1,81 @@
 services:
+  # HTTPS-Everywhere Phase 3 — self-signed TLS bootstrap (init container).
+  # Generates a CN=certctl-server ECDSA-P256 (SHA-256 signature) cert with
+  # the SAN list locked by milestone §3.6 on first boot; subsequent boots
+  # see the cert already present in the `certs` named volume and no-op out.
+  # Server + agent mount the volume read-only. Destroy via `docker compose
+  # down -v` to force regeneration. This bootstrap is for docker-compose
+  # demos and local dev only; Helm operators supply a Secret / cert-manager
+  # Certificate per docs/tls.md.
+  #
+  # Rationale for ECDSA-P256 (was ed25519 pre-v2.0.48): Apple's TLS stack
+  # — Safari Network Framework and the macOS-bundled LibreSSL 3.3.6
+  # /usr/bin/curl — does not advertise ed25519 in the ClientHello
+  # signature_algorithms extension for server certs, yielding "tls: peer
+  # doesn't support any of the certificate's signature algorithms" at
+  # handshake. ECDSA-P256 with SHA-256 is universally supported. See
+  # docs/tls.md Pattern 1.
+  certctl-tls-init:
+    image: alpine/openssl:latest
+    container_name: certctl-tls-init
+    restart: "no"
+    entrypoint: /bin/sh
+    command:
+      - -c
+      - |
+        set -eu
+        CERT=/etc/certctl/tls/server.crt
+        KEY=/etc/certctl/tls/server.key
+        CA=/etc/certctl/tls/ca.crt
+        if [ -f "$$CERT" ] && [ -f "$$KEY" ] && [ -f "$$CA" ]; then
+          echo "TLS cert already present at $$CERT — skipping generation"
+        else
+          mkdir -p /etc/certctl/tls
+          openssl req -x509 -newkey ec \
+            -pkeyopt ec_paramgen_curve:P-256 \
+            -nodes \
+            -keyout "$$KEY" \
+            -out "$$CERT" \
+            -days 3650 \
+            -subj "/CN=certctl-server" \
+            -addext "subjectAltName=DNS:certctl-server,DNS:localhost,IP:127.0.0.1,IP:::1"
+          cp "$$CERT" "$$CA"
+          echo "Generated self-signed TLS cert for certctl-server (ECDSA-P256/SHA-256, 3650d, CN=certctl-server)"
+        fi
+        # certctl binary runs as UID 1000 inside the server container per
+        # Dockerfile:64-65; the cert + key must be readable by that UID.
+        chown 1000:1000 "$$CERT" "$$KEY" "$$CA"
+        chmod 0644 "$$CERT" "$$CA"
+        chmod 0600 "$$KEY"
+    volumes:
+      - certs:/etc/certctl/tls
+    networks:
+      - certctl-network
+
   # PostgreSQL database
+  #
+  # U-3 (P1, cat-u-seed_initdb_schema_drift, GitHub #10):
+  # Pre-U-3 this stack mounted a hand-curated subset of `migrations/*.up.sql`
+  # plus `seed.sql` into `/docker-entrypoint-initdb.d/`, and postgres
+  # initdb-applied them on first boot. The mount list rotted every time a
+  # new migration shipped that the seed depended on (000013 added
+  # policy_rules.severity, 000017 renames retry_interval_minutes, etc.) —
+  # initdb crashed, the container reported `unhealthy` indefinitely, and
+  # `docker compose -f deploy/docker-compose.yml up -d --build` from a
+  # fresh clone of v2.0.50 hit it on the first try.
+  #
+  # Post-U-3 the schema is built EXCLUSIVELY by the server at startup via
+  # internal/repository/postgres.RunMigrations + RunSeed. Single source of
+  # truth, no list to keep in sync. Postgres comes up empty; the server
+  # waits for it healthy, then applies the full migration ladder + seed in
+  # one shot. Helm + the dev examples were already runtime-only (Path B)
+  # and worked through the same window.
+  #
+  # `start_period: 30s` gives postgres room to bootstrap on slow runners
+  # (CI macOS, low-spec laptops) before the healthcheck failure counter
+  # starts ticking. Pre-U-3 a slow first-init combined with the
+  # `unhealthy` flap to cascade into certctl-server's `service_healthy`
+  # depends_on, blocking the whole stack.
   postgres:
     image: postgres:16-alpine
     container_name: certctl-postgres
@@ -11,17 +87,6 @@ services:
       - "5432:5432"
     volumes:
       - postgres_data:/var/lib/postgresql/data
-      - ../migrations/000001_initial_schema.up.sql:/docker-entrypoint-initdb.d/001_schema.sql
-      - ../migrations/000002_agent_metadata.up.sql:/docker-entrypoint-initdb.d/002_agent_metadata.sql
-      - ../migrations/000003_certificate_profiles.up.sql:/docker-entrypoint-initdb.d/003_certificate_profiles.sql
-      - ../migrations/000004_agent_groups.up.sql:/docker-entrypoint-initdb.d/004_agent_groups.sql
-      - ../migrations/000005_revocation.up.sql:/docker-entrypoint-initdb.d/005_revocation.sql
-      - ../migrations/000006_discovery.up.sql:/docker-entrypoint-initdb.d/006_discovery.sql
-      - ../migrations/000007_network_discovery.up.sql:/docker-entrypoint-initdb.d/007_network_discovery.sql
-      - ../migrations/000008_verification.up.sql:/docker-entrypoint-initdb.d/008_verification.sql
-      - ../migrations/000009_issuer_config.up.sql:/docker-entrypoint-initdb.d/009_issuer_config.sql
-      - ../migrations/000010_target_config.up.sql:/docker-entrypoint-initdb.d/010_target_config.sql
-      - ../migrations/seed.sql:/docker-entrypoint-initdb.d/020_seed.sql
     networks:
       - certctl-network
     healthcheck:
@@ -29,6 +94,7 @@ services:
       interval: 5s
       timeout: 5s
       retries: 5
+      start_period: 30s
     restart: unless-stopped
 
   # Certctl Server (API + scheduler)
@@ -50,10 +116,14 @@ services:
     depends_on:
       postgres:
         condition: service_healthy
+      certctl-tls-init:
+        condition: service_completed_successfully
     environment:
       CERTCTL_DATABASE_URL: postgres://certctl:${POSTGRES_PASSWORD:-certctl}@postgres:5432/certctl?sslmode=disable
       CERTCTL_SERVER_HOST: 0.0.0.0
       CERTCTL_SERVER_PORT: 8443
+      CERTCTL_SERVER_TLS_CERT_PATH: /etc/certctl/tls/server.crt
+      CERTCTL_SERVER_TLS_KEY_PATH: /etc/certctl/tls/server.key
       CERTCTL_LOG_LEVEL: info
       CERTCTL_AUTH_TYPE: none
       CERTCTL_KEYGEN_MODE: server  # Demo uses server-side keygen; production should use "agent"
@@ -61,13 +131,20 @@ services:
       CERTCTL_CONFIG_ENCRYPTION_KEY: ${CERTCTL_CONFIG_ENCRYPTION_KEY:-change-me-32-char-encryption-key}  # AES-256-GCM for dynamic issuer/target config
     ports:
       - "8443:8443"
+    volumes:
+      - certs:/etc/certctl/tls:ro
     networks:
       - certctl-network
     healthcheck:
-      test: ["CMD", "curl", "-f", "http://localhost:8443/health"]
+      test: ["CMD", "curl", "--cacert", "/etc/certctl/tls/ca.crt", "-f", "https://localhost:8443/health"]
       interval: 10s
       timeout: 5s
       retries: 5
+      # U-3: server boot now does RunMigrations + RunSeed before listening on
+      # 8443. On a fresh clone the full migration ladder + seed application
+      # can take ~10s on a small VM; start_period prevents the first few
+      # healthcheck attempts from counting as failures while that work runs.
+      start_period: 30s
     restart: unless-stopped
     logging:
       driver: "json-file"
@@ -99,13 +176,15 @@ services:
       certctl-server:
         condition: service_healthy
     environment:
-      CERTCTL_SERVER_URL: http://certctl-server:8443
+      CERTCTL_SERVER_URL: https://certctl-server:8443
+      CERTCTL_SERVER_CA_BUNDLE_PATH: /etc/certctl/tls/ca.crt
       CERTCTL_API_KEY: ${CERTCTL_API_KEY:-change-me-in-production}
       CERTCTL_AGENT_NAME: docker-agent
       CERTCTL_LOG_LEVEL: info
       CERTCTL_DISCOVERY_DIRS: /var/lib/certctl/keys  # Agent scans this directory for existing certificates
     volumes:
       - agent_keys:/var/lib/certctl/keys
+      - certs:/etc/certctl/tls:ro
     networks:
       - certctl-network
     healthcheck:
@@ -134,3 +213,5 @@ volumes:
     driver: local
   agent_keys:
     driver: local
+  certs:
+    driver: local

deploy/helm/CHART_SUMMARY.md

@@ -246,8 +246,8 @@ helm install certctl certctl/ \
 |--------|---------|-------------|
 | `server.replicas` | 1 | Number of server replicas |
 | `server.port` | 8443 | Server port |
-| `server.auth.type` | api-key | Authentication type |
-| `server.auth.apiKey` | "" | API key (REQUIRED) |
+| `server.auth.type` | api-key | Authentication type — `api-key` or `none` (G-1: `jwt` removed; for JWT/OIDC use a fronting authenticating gateway, see `docs/architecture.md` and `docs/upgrade-to-v2-jwt-removal.md`) |
+| `server.auth.apiKey` | "" | API key (REQUIRED when `auth.type=api-key`) |
 | `server.logging.level` | info | Log level |
 | `server.logging.format` | json | Log format |
 

deploy/helm/DEPLOYMENT_GUIDE.md

@@ -236,10 +236,12 @@ kubectl get svc -l app.kubernetes.io/instance=certctl
 kubectl get ingress
 kubectl describe ingress certctl
 
-# Test API connectivity
+# Test API connectivity (HTTPS-only as of v2.2)
 POD=$(kubectl get pods -l app.kubernetes.io/component=server -o jsonpath='{.items[0].metadata.name}')
 kubectl port-forward $POD 8443:8443 &
-curl -H "Authorization: Bearer $API_KEY" http://localhost:8443/health
+# If the chart provisioned a self-signed cert, fetch the CA bundle from the TLS secret first:
+#   kubectl get secret certctl-server-tls -o jsonpath='{.data.ca\.crt}' | base64 -d > /tmp/certctl-ca.crt
+curl --cacert /tmp/certctl-ca.crt -H "Authorization: Bearer $API_KEY" https://localhost:8443/health
 ```
 
 ### Step 6: Access the Dashboard
@@ -333,9 +335,10 @@ kubectl logs $POD | tail -20
 # Port forward to API
 kubectl port-forward svc/certctl-server 8443:8443 &
 
-# Create a test certificate
+# Create a test certificate (HTTPS-only as of v2.2 — pin the chart-provisioned CA bundle)
+# kubectl get secret certctl-server-tls -o jsonpath='{.data.ca\.crt}' | base64 -d > /tmp/certctl-ca.crt
 API_KEY="your-api-key"
-curl -X POST http://localhost:8443/api/v1/certificates \
+curl --cacert /tmp/certctl-ca.crt -X POST https://localhost:8443/api/v1/certificates \
   -H "Authorization: Bearer $API_KEY" \
   -H "Content-Type: application/json" \
   -d '{

deploy/helm/INSTALLATION.md

@@ -33,9 +33,11 @@ kubectl get pods -l app.kubernetes.io/instance=certctl
 # View server logs
 kubectl logs -l app.kubernetes.io/component=server -f
 
-# Access the API
+# Access the API (HTTPS-only as of v2.2; use --cacert or -k depending on your cert provisioning)
 kubectl port-forward svc/certctl-server 8443:8443 &
-curl http://localhost:8443/health
+# If the chart provisioned a self-signed cert, fetch the CA bundle from the secret first:
+#   kubectl get secret certctl-server-tls -o jsonpath='{.data.ca\.crt}' | base64 -d > /tmp/certctl-ca.crt
+curl --cacert /tmp/certctl-ca.crt https://localhost:8443/health
 ```
 
 ## Next Steps

deploy/helm/certctl/README.md

@@ -0,0 +1,148 @@
+# certctl Helm Chart
+
+Production-ready Helm chart for deploying [certctl](https://github.com/shankar0123/certctl) on Kubernetes. Wires up the certctl server (Deployment), PostgreSQL (StatefulSet with PVC), and the agent (DaemonSet — one per node) on a private cluster, with health probes, security contexts, and optional Ingress.
+
+## Quick install
+
+```bash
+helm install certctl deploy/helm/certctl/ \
+  --create-namespace --namespace certctl \
+  --set server.auth.apiKey="$(openssl rand -base64 32)" \
+  --set postgresql.auth.password="$(openssl rand -base64 24)"
+```
+
+This brings up:
+
+- `<release>-server` Deployment (HTTPS-only on port 8443; TLS 1.3)
+- `<release>-postgres` StatefulSet (PostgreSQL 16-alpine, 1 replica, 10Gi PVC by default)
+- `<release>-agent` DaemonSet (polls server, generates ECDSA P-256 keys locally)
+- Service objects, optional Ingress, and ServiceAccount with RBAC
+
+See [`values.yaml`](values.yaml) for the full configuration surface — issuer settings, target connectors, scheduler intervals, notifier credentials, and resource requests/limits all live there.
+
+## Operational notes
+
+### Postgres password rotation — read this before changing `postgresql.auth.password`
+
+**The trap.** `postgresql.auth.password` is bound to `pg_authid` exactly once — when the StatefulSet's PVC is provisioned and `initdb` runs. The official `postgres:16-alpine` image only runs `initdb` when `/var/lib/postgresql/data` is empty, so on every subsequent rollout the `POSTGRES_PASSWORD` env var is read into the container but **ignored** by postgres itself. The certctl-server container also picks up the new value (via the database URL helper template), so the two halves diverge: server presents the new password, postgres still expects the old one.
+
+**Symptom.** The certctl-server pod's startup log shows:
+
+```
+failed to ping database: postgres rejected the configured credentials
+(SQLSTATE 28P01 — invalid_password). If you recently rotated POSTGRES_PASSWORD ...
+```
+
+That diagnostic is emitted by `internal/repository/postgres/db.go::wrapPingError` — it points operators at the two remediation paths below.
+
+**Remediation, non-destructive (preferred for any environment with real data):**
+
+```bash
+# 1. Rotate the password in postgres directly
+kubectl -n certctl exec -it <release>-postgres-0 -- \
+  psql -U certctl -c "ALTER ROLE certctl PASSWORD '<new-password>';"
+
+# 2. Update the secret / Helm values to the same value
+helm upgrade <release> deploy/helm/certctl/ \
+  --reuse-values \
+  --set postgresql.auth.password='<new-password>'
+
+# 3. Bounce the certctl-server pod so it re-reads the secret
+kubectl -n certctl rollout restart deployment/<release>-server
+```
+
+**Remediation, destructive (DESTROYS ALL CERTCTL DATA — only acceptable on dev/demo clusters):**
+
+```bash
+helm uninstall <release> -n certctl
+kubectl -n certctl delete pvc -l \
+  app.kubernetes.io/name=certctl,app.kubernetes.io/component=postgres
+helm install <release> deploy/helm/certctl/ \
+  --namespace certctl \
+  --set postgresql.auth.password='<new-password>'
+```
+
+The PVC re-creates empty, `initdb` runs on first boot of the new postgres pod, and `pg_authid` is seeded with the new password.
+
+**Why we don't fix this in the chart.** The env-vs-`pg_authid` divergence is intrinsic to how the upstream `postgres` image bootstraps — `initdb` is run-once-per-empty-data-dir, and there is no upstream-supported way to make subsequent boots re-seed `pg_authid` from `POSTGRES_PASSWORD`. The ergonomic answer is the runtime diagnostic plus this operational note.
+
+**Cross-references.** Same root cause is documented for the docker-compose path in [`docs/quickstart.md`](../../../docs/quickstart.md) (Warning callout after the `cp .env.example .env` block) and in [`deploy/ENVIRONMENTS.md`](../../ENVIRONMENTS.md) (Stateful volume — first-boot password binding section). The runtime diagnostic itself lives in `internal/repository/postgres/db.go::wrapPingError` with regression coverage in `internal/repository/postgres/db_test.go`.
+
+### Server API key rotation
+
+Unlike the postgres password, `server.auth.apiKey` accepts a comma-separated list, so zero-downtime rotation is straightforward:
+
+```bash
+# 1. Add the new key alongside the old
+helm upgrade <release> deploy/helm/certctl/ \
+  --reuse-values \
+  --set server.auth.apiKey='new-key,old-key'
+
+# 2. Roll your agents / clients over to the new key
+
+# 3. Remove the old key
+helm upgrade <release> deploy/helm/certctl/ \
+  --reuse-values \
+  --set server.auth.apiKey='new-key'
+```
+
+### JWT / OIDC via authenticating gateway
+
+certctl's in-process auth surface is intentionally narrow: `server.auth.type=api-key` for production deployments and `server.auth.type=none` for development. There is no in-process JWT, OIDC, mTLS, or SAML middleware. (`server.auth.type=jwt` was accepted pre-G-1 but silently routed every request through the api-key bearer middleware — silent auth downgrade. The chart now fails at `helm install`/`helm upgrade` template time via the `certctl.validateAuthType` helper if you set it. See [`../../../docs/upgrade-to-v2-jwt-removal.md`](../../../docs/upgrade-to-v2-jwt-removal.md) if you previously had this in your values.)
+
+For deployments that need JWT/OIDC, the canonical Kubernetes-flavored shape is to put oauth2-proxy in front of the certctl Service, attach an authenticating Ingress middleware, and run certctl with `server.auth.type=none`:
+
+```bash
+# 1. Install oauth2-proxy (or any OIDC-terminating sidecar) in the same namespace
+helm install oauth2-proxy oauth2-proxy/oauth2-proxy \
+  --namespace certctl \
+  --set config.clientID="$OIDC_CLIENT_ID" \
+  --set config.clientSecret="$OIDC_CLIENT_SECRET" \
+  --set config.cookieSecret="$(openssl rand -base64 32)" \
+  --set config.configFile='|
+    provider = "oidc"
+    oidc_issuer_url = "https://your-issuer/"
+    upstreams = ["http://<release>-server.certctl.svc.cluster.local:8443"]
+    pass_authorization_header = true
+    set_authorization_header = true
+    email_domains = ["*"]
+  '
+
+# 2. Install certctl with type=none (gateway terminates auth)
+helm install certctl deploy/helm/certctl/ \
+  --namespace certctl \
+  --set server.auth.type=none \
+  --set postgresql.auth.password="$(openssl rand -base64 24)"
+
+# 3. Attach an Ingress that routes through oauth2-proxy
+#    (Traefik ForwardAuth, nginx auth_request, Envoy ext_authz, etc.)
+```
+
+Same root pattern works with Pomerium, Authelia, Caddy `forward_auth`, Apache `mod_auth_openidc`, or any service-mesh `ext_authz`. See [`../../../docs/architecture.md`](../../../docs/architecture.md) "Authenticating-gateway pattern" for the full design rationale and [`../../../docs/upgrade-to-v2-jwt-removal.md`](../../../docs/upgrade-to-v2-jwt-removal.md) for the migration walkthrough.
+
+### TLS certificate sourcing
+
+By default the chart provisions a self-signed cert via the same init-container pattern as the docker-compose deploy. For production, supply an operator-managed Secret (cert-manager, internal CA, etc.) — see [`docs/tls.md`](../../../docs/tls.md) for the full provisioning matrix and [`docs/upgrade-to-tls.md`](../../../docs/upgrade-to-tls.md) for upgrade-from-HTTP procedures.
+
+## Disabling embedded postgres
+
+If you have an existing PostgreSQL cluster, disable the embedded one and point at it directly:
+
+```bash
+helm install certctl deploy/helm/certctl/ \
+  --set postgresql.enabled=false \
+  --set server.databaseUrl='postgres://certctl:<pw>@my-pg-host:5432/certctl?sslmode=require'
+```
+
+The volume-trap section above does **not** apply to this configuration — your postgres operator (or cloud DB) handles password rotation, and you control `pg_authid` directly.
+
+## Uninstall
+
+```bash
+helm uninstall <release> -n certctl
+# Optional — also delete the postgres PVC (DESTROYS DATA):
+kubectl -n certctl delete pvc -l \
+  app.kubernetes.io/name=certctl,app.kubernetes.io/component=postgres
+```
+
+By default `helm uninstall` retains the StatefulSet's PVCs, so reinstalling with the same release name preserves the database. If you've changed `postgresql.auth.password` in your values between uninstall and reinstall, you'll hit the trap on the reinstall — apply the non-destructive remediation above, or also delete the PVC.

deploy/helm/certctl/templates/NOTES.txt

@@ -4,36 +4,46 @@
 {{- else if contains "NodePort" .Values.server.service.type }}
   export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
   export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "certctl.fullname" . }}-server)
-  echo http://$NODE_IP:$NODE_PORT
+  echo https://$NODE_IP:$NODE_PORT
 {{- else if contains "LoadBalancer" .Values.server.service.type }}
   export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "certctl.fullname" . }}-server --template "{.status.loadBalancer.ingress[0].ip}")
-  echo http://$SERVICE_IP:{{ .Values.server.service.port }}
+  echo https://$SERVICE_IP:{{ .Values.server.service.port }}
 {{- else }}
   export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "certctl.name" . }},app.kubernetes.io/instance={{ .Release.Name }},app.kubernetes.io/component=server" -o jsonpath="{.items[0].metadata.name}")
   export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT
+  echo "Visit https://127.0.0.1:8443 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8443:$CONTAINER_PORT
 {{- end }}
 
-2. Get the default API key:
+2. Talk to the HTTPS-only server from your workstation:
+  # Export the CA bundle that signed the server cert (self-signed or cert-manager-issued)
+  kubectl get secret --namespace {{ .Release.Namespace }} {{ include "certctl.tls.secretName" . }} \
+    -o jsonpath='{.data.ca\.crt}' | base64 --decode > /tmp/certctl-ca.crt
+  # (If ca.crt is empty, fall back to tls.crt — typical when the Secret
+  #  was created from a self-signed bootstrap cert without a separate CA.)
+
+  # Adapt the URL below to match the Server URL printed in step 1.
+  curl --cacert /tmp/certctl-ca.crt https://127.0.0.1:8443/health
+
+3. Get the default API key:
   kubectl get secret --namespace {{ .Release.Namespace }} {{ include "certctl.fullname" . }}-server -o jsonpath="{.data.api-key}" | base64 --decode; echo
 
-3. Get PostgreSQL connection details:
+4. Get PostgreSQL connection details:
   Host: {{ include "certctl.fullname" . }}-postgres.{{ .Release.Namespace }}.svc.cluster.local
   Port: 5432
   Database: {{ .Values.postgresql.auth.database }}
   Username: {{ .Values.postgresql.auth.username }}
   Password: $(kubectl get secret --namespace {{ .Release.Namespace }} {{ include "certctl.fullname" . }}-postgres -o jsonpath="{.data.password}" | base64 --decode)
 
-4. Check deployment status:
+5. Check deployment status:
   kubectl get pods -n {{ .Release.Namespace }} -l app.kubernetes.io/instance={{ .Release.Name }}
 
-5. View server logs:
+6. View server logs:
   kubectl logs -n {{ .Release.Namespace }} -l app.kubernetes.io/name={{ include "certctl.name" . }},app.kubernetes.io/component=server -f
 
 {{- if .Values.agent.enabled }}
 
-6. View agent logs:
+7. View agent logs:
   kubectl logs -n {{ .Release.Namespace }} -l app.kubernetes.io/name={{ include "certctl.name" . }},app.kubernetes.io/component=agent -f
 
 {{- end }}
@@ -58,11 +68,7 @@ IMPORTANT NOTES FOR PRODUCTION:
    - Use an external PostgreSQL managed service (AWS RDS, Cloud SQL, etc.)
    - Set postgresql.enabled=false and configure CERTCTL_DATABASE_URL in values
 
-5. Enable HTTPS/TLS using an Ingress with certificate management:
-   - Configure cert-manager for automatic TLS certificate renewal
-   - Update ingress values with your domain and certificate issuer
-
-6. Review security contexts and network policies:
+5. Review security contexts and network policies:
    - All containers run as non-root
    - Implement network policies to restrict traffic between components
    - Consider pod security policies or security standards for your cluster

deploy/helm/certctl/templates/_helpers.tpl

@@ -118,8 +118,77 @@ postgres://{{ .Values.postgresql.auth.username }}:$(POSTGRES_PASSWORD)@{{ includ
 {{- end }}
 
 {{/*
-Server URL (for agents)
+Server URL (for agents). HTTPS-only as of v2.2 — see docs/tls.md.
 */}}
 {{- define "certctl.serverURL" -}}
-http://{{ include "certctl.fullname" . }}-server:{{ .Values.server.service.port }}
+https://{{ include "certctl.fullname" . }}-server:{{ .Values.server.service.port }}
+{{- end }}
+
+{{/*
+TLS Secret name resolver.
+
+Operator-facing precedence:
+  1. server.tls.existingSecret        — operator points at a pre-existing kubernetes.io/tls Secret
+  2. server.tls.certManager.secretName — explicit secret name for the cert-manager Certificate CR
+  3. "<fullname>-tls"                  — default when cert-manager is enabled but secretName is blank
+
+Never emits an empty string — that case is already excluded by certctl.tls.required below,
+which must be invoked by any template that depends on the resolved secret name.
+*/}}
+{{- define "certctl.tls.secretName" -}}
+{{- if .Values.server.tls.existingSecret -}}
+{{- .Values.server.tls.existingSecret -}}
+{{- else if .Values.server.tls.certManager.secretName -}}
+{{- .Values.server.tls.certManager.secretName -}}
+{{- else -}}
+{{- printf "%s-tls" (include "certctl.fullname" .) -}}
+{{- end -}}
+{{- end }}
+
+{{/*
+TLS configuration gate.
+
+HTTPS is the only supported listener mode (v2.2+). The server refuses to start
+without a cert/key pair mounted at server.tls.mountPath, so `helm template` /
+`helm install` must fail loudly at render-time rather than shipping a broken
+Deployment that crash-loops with "tls config required".
+
+Operators MUST configure EXACTLY ONE of:
+  (a) server.tls.existingSecret: <name-of-kubernetes.io/tls-secret>
+  (b) server.tls.certManager.enabled: true  (+ issuerRef.name populated)
+
+Any template that mounts the TLS Secret must call
+`{{ include "certctl.tls.required" . }}` at the top so this guard runs once
+per affected resource. No-op when configured correctly.
+*/}}
+{{- define "certctl.tls.required" -}}
+{{- if and (not .Values.server.tls.existingSecret) (not .Values.server.tls.certManager.enabled) -}}
+{{- fail "\n\ncertctl refuses to start without TLS.\n\nSet EXACTLY ONE of:\n  --set server.tls.existingSecret=<your-kubernetes.io/tls-secret-name>\nOR\n  --set server.tls.certManager.enabled=true \\\n  --set server.tls.certManager.issuerRef.name=<your-issuer-or-clusterissuer>\n\nSee docs/tls.md for the full setup walkthrough, including bootstrap\nguidance for air-gapped clusters without cert-manager.\n" -}}
+{{- end -}}
+{{- if and .Values.server.tls.certManager.enabled (not .Values.server.tls.certManager.issuerRef.name) -}}
+{{- fail "\n\nserver.tls.certManager.enabled=true but server.tls.certManager.issuerRef.name is empty.\n\nSet:\n  --set server.tls.certManager.issuerRef.name=<your-issuer-or-clusterissuer>\n\nSee docs/tls.md.\n" -}}
+{{- end -}}
+{{- end }}
+
+{{/*
+Auth-type validation gate.
+
+G-1 (P1): pre-G-1 the chart accepted server.auth.type=jwt and the
+certctl-server container silently routed every request through the
+api-key bearer middleware (no JWT impl ships with certctl). Post-G-1
+the chart fails at template-time with a pointer at the authenticating-
+gateway pattern. The valid set must stay in sync with
+internal/config.ValidAuthTypes() in the Go binary; if you add a value
+there you must add it here too (and update the property test in
+internal/config/config_test.go that pins both surfaces).
+
+Any template that consumes .Values.server.auth.type should call
+`{{ include "certctl.validateAuthType" . }}` at the top so this guard
+runs once per affected resource. No-op when configured correctly.
+*/}}
+{{- define "certctl.validateAuthType" -}}
+{{- $valid := list "api-key" "none" -}}
+{{- if not (has .Values.server.auth.type $valid) -}}
+{{- fail (printf "\n\nserver.auth.type=%q is not supported (valid: %v).\n\nFor JWT/OIDC, run an authenticating gateway in front of certctl\n(oauth2-proxy / Envoy ext_authz / Traefik ForwardAuth / Pomerium) and\nset server.auth.type=none here so the gateway terminates federated\nidentity. See docs/architecture.md \"Authenticating-gateway pattern\"\nand docs/upgrade-to-v2-jwt-removal.md for the migration walkthrough.\n\nG-1 audit closure: pre-G-1 the chart accepted type=jwt and the binary\nsilently downgraded to api-key middleware. The chart now fails at\ntemplate time so misconfigured deployments cannot ship.\n" .Values.server.auth.type $valid) -}}
+{{- end -}}
 {{- end }}

deploy/helm/certctl/templates/agent-daemonset.yaml

@@ -1,4 +1,5 @@
 {{- if .Values.agent.enabled }}
+{{- include "certctl.tls.required" . }}
 {{- if eq .Values.agent.kind "DaemonSet" }}
 apiVersion: apps/v1
 kind: DaemonSet
@@ -53,6 +54,8 @@ spec:
                   fieldPath: metadata.name
             - name: CERTCTL_KEY_DIR
               value: {{ .Values.agent.keyDir }}
+            - name: CERTCTL_SERVER_CA_BUNDLE_PATH
+              value: "{{ .Values.server.tls.mountPath }}/ca.crt"
             {{- if .Values.agent.discoveryDirs }}
             - name: CERTCTL_DISCOVERY_DIRS
               valueFrom:
@@ -70,12 +73,19 @@ spec:
               mountPath: {{ .Values.agent.keyDir }}
             - name: tmp
               mountPath: /tmp
+            - name: server-tls
+              mountPath: {{ .Values.server.tls.mountPath }}
+              readOnly: true
       volumes:
         - name: agent-keys
           emptyDir:
             sizeLimit: 1Gi
         - name: tmp
           emptyDir: {}
+        - name: server-tls
+          secret:
+            secretName: {{ include "certctl.tls.secretName" . }}
+            defaultMode: 0400
 {{- else if eq .Values.agent.kind "Deployment" }}
 apiVersion: apps/v1
 kind: Deployment
@@ -135,6 +145,8 @@ spec:
               {{- end }}
             - name: CERTCTL_KEY_DIR
               value: {{ .Values.agent.keyDir }}
+            - name: CERTCTL_SERVER_CA_BUNDLE_PATH
+              value: "{{ .Values.server.tls.mountPath }}/ca.crt"
             {{- if .Values.agent.discoveryDirs }}
             - name: CERTCTL_DISCOVERY_DIRS
               valueFrom:
@@ -152,11 +164,18 @@ spec:
               mountPath: {{ .Values.agent.keyDir }}
             - name: tmp
               mountPath: /tmp
+            - name: server-tls
+              mountPath: {{ .Values.server.tls.mountPath }}
+              readOnly: true
       volumes:
         - name: agent-keys
           emptyDir:
             sizeLimit: 1Gi
         - name: tmp
           emptyDir: {}
+        - name: server-tls
+          secret:
+            secretName: {{ include "certctl.tls.secretName" . }}
+            defaultMode: 0400
 {{- end }}
 {{- end }}

deploy/helm/certctl/templates/ingress.yaml

@@ -1,14 +1,24 @@
 {{- if .Values.ingress.enabled }}
+{{- if and .Values.ingress.certManager.enabled (not .Values.ingress.certManager.issuerRef.name) -}}
+{{- fail "\n\ningress.certManager.enabled=true but ingress.certManager.issuerRef.name is empty.\n\nSet:\n  --set ingress.certManager.issuerRef.name=<your-issuer-or-clusterissuer>\n\nThis is separate from server.tls.certManager — it issues the external-facing\nIngress cert, not the in-cluster server TLS cert. See docs/tls.md.\n" -}}
+{{- end -}}
 apiVersion: networking.k8s.io/v1
 kind: Ingress
 metadata:
   name: {{ include "certctl.fullname" . }}
   labels:
     {{- include "certctl.labels" . | nindent 4 }}
-  {{- with .Values.ingress.annotations }}
   annotations:
+    {{- if .Values.ingress.certManager.enabled }}
+    {{- if eq .Values.ingress.certManager.issuerRef.kind "ClusterIssuer" }}
+    cert-manager.io/cluster-issuer: {{ .Values.ingress.certManager.issuerRef.name | quote }}
+    {{- else }}
+    cert-manager.io/issuer: {{ .Values.ingress.certManager.issuerRef.name | quote }}
+    {{- end }}
+    {{- end }}
+    {{- with .Values.ingress.annotations }}
     {{- toYaml . | nindent 4 }}
-  {{- end }}
+    {{- end }}
 spec:
   {{- if .Values.ingress.className }}
   ingressClassName: {{ .Values.ingress.className }}
@@ -33,7 +43,7 @@ spec:
             pathType: {{ .pathType }}
             backend:
               service:
-                name: {{ include "certctl.fullname" . }}-server
+                name: {{ include "certctl.fullname" $ }}-server
                 port:
                   number: {{ $.Values.server.service.port }}
           {{- end }}

deploy/helm/certctl/templates/server-certificate.yaml

@@ -0,0 +1,31 @@
+{{- if .Values.server.tls.certManager.enabled }}
+{{- include "certctl.tls.required" . }}
+apiVersion: cert-manager.io/v1
+kind: Certificate
+metadata:
+  name: {{ include "certctl.fullname" . }}-server-tls
+  labels:
+    {{- include "certctl.labels" . | nindent 4 }}
+    app.kubernetes.io/component: server
+spec:
+  secretName: {{ include "certctl.tls.secretName" . }}
+  commonName: {{ .Values.server.tls.certManager.commonName | quote }}
+  dnsNames:
+    {{- range .Values.server.tls.certManager.dnsNames }}
+    - {{ . | quote }}
+    {{- end }}
+  duration: {{ .Values.server.tls.certManager.duration }}
+  renewBefore: {{ .Values.server.tls.certManager.renewBefore }}
+  usages:
+    - server auth
+    - digital signature
+    - key encipherment
+  privateKey:
+    algorithm: ECDSA
+    size: 256
+    rotationPolicy: Always
+  issuerRef:
+    name: {{ .Values.server.tls.certManager.issuerRef.name | quote }}
+    kind: {{ .Values.server.tls.certManager.issuerRef.kind }}
+    group: {{ .Values.server.tls.certManager.issuerRef.group }}
+{{- end }}

deploy/helm/certctl/templates/server-configmap.yaml

@@ -1,3 +1,4 @@
+{{- include "certctl.validateAuthType" . }}
 apiVersion: v1
 kind: ConfigMap
 metadata:

deploy/helm/certctl/templates/server-deployment.yaml

@@ -1,3 +1,5 @@
+{{- include "certctl.tls.required" . }}
+{{- include "certctl.validateAuthType" . }}
 apiVersion: apps/v1
 kind: Deployment
 metadata:
@@ -32,7 +34,7 @@ spec:
           image: {{ include "certctl.serverImage" . }}
           imagePullPolicy: {{ .Values.server.image.pullPolicy }}
           ports:
-            - name: http
+            - name: https
               containerPort: {{ .Values.server.port }}
               protocol: TCP
           env:
@@ -40,6 +42,10 @@ spec:
               value: "0.0.0.0"
             - name: CERTCTL_SERVER_PORT
               value: "{{ .Values.server.port }}"
+            - name: CERTCTL_SERVER_TLS_CERT_PATH
+              value: "{{ .Values.server.tls.mountPath }}/tls.crt"
+            - name: CERTCTL_SERVER_TLS_KEY_PATH
+              value: "{{ .Values.server.tls.mountPath }}/tls.key"
             - name: CERTCTL_DATABASE_URL
               valueFrom:
                 secretKeyRef:
@@ -172,12 +178,19 @@ spec:
           volumeMounts:
             - name: tmp
               mountPath: /tmp
+            - name: tls
+              mountPath: {{ .Values.server.tls.mountPath }}
+              readOnly: true
             {{- if .Values.server.volumeMounts }}
             {{- toYaml .Values.server.volumeMounts | nindent 12 }}
             {{- end }}
       volumes:
         - name: tmp
           emptyDir: {}
+        - name: tls
+          secret:
+            secretName: {{ include "certctl.tls.secretName" . }}
+            defaultMode: 0400
         {{- if .Values.server.volumes }}
         {{- toYaml .Values.server.volumes | nindent 8 }}
         {{- end }}

deploy/helm/certctl/templates/server-secret.yaml

@@ -1,3 +1,4 @@
+{{- include "certctl.validateAuthType" . }}
 apiVersion: v1
 kind: Secret
 metadata:

deploy/helm/certctl/templates/server-service.yaml

@@ -13,8 +13,8 @@ spec:
   type: {{ .Values.server.service.type }}
   ports:
     - port: {{ .Values.server.service.port }}
-      targetPort: http
+      targetPort: https
       protocol: TCP
-      name: http
+      name: https
   selector:
     {{- include "certctl.serverSelectorLabels" . | nindent 4 }}

deploy/helm/certctl/values.yaml

@@ -48,35 +48,103 @@ server:
       drop:
         - ALL
 
-  # Liveness and readiness probes
+  # Liveness and readiness probes (HTTPS-only as of v2.2).
+  #
+  # The two paths exposed for probes are `/health` and `/ready` —
+  # registered in internal/api/router/router.go:76-85 and bypassing the
+  # auth middleware via the no-auth list at cmd/server/main.go:920.
+  # Both serve the same JSON shape today (`{"status":"healthy"}` /
+  # `{"status":"ready"}`) but exist as separate routes so liveness and
+  # readiness can diverge in the future without renaming.
   livenessProbe:
     httpGet:
       path: /health
-      port: http
+      port: https
+      scheme: HTTPS
     initialDelaySeconds: 10
     periodSeconds: 10
     timeoutSeconds: 5
     failureThreshold: 3
 
+  # U-2 (P1, cat-u-healthcheck_protocol_mismatch — adjacent fix): pre-U-2
+  # the readiness probe pointed at `/readyz`, the conventional kube-flavor
+  # name. The certctl server doesn't register `/readyz` (only `/health`
+  # and `/ready`) — see cmd/server/main.go:920 and
+  # internal/api/router/router.go:81. K8s readiness probes therefore
+  # received a 404 (or, with auth enabled, a 401 from the api-key middleware
+  # because `/readyz` was NOT in the no-auth bypass set), pods stayed
+  # `NotReady` indefinitely, and Helm rollouts stalled. Post-U-2 the path
+  # matches a registered route.
   readinessProbe:
     httpGet:
-      path: /readyz
-      port: http
+      path: /ready
+      port: https
+      scheme: HTTPS
     initialDelaySeconds: 5
     periodSeconds: 5
     timeoutSeconds: 3
     failureThreshold: 2
 
+  # TLS configuration — REQUIRED. HTTPS is the only supported mode (v2.2+).
+  # Operator must configure EXACTLY ONE of:
+  #   (a) server.tls.existingSecret: <name>        # pre-existing kubernetes.io/tls Secret
+  #   (b) server.tls.certManager.enabled: true     # provision a cert-manager Certificate CR
+  # Refusing to set either makes `helm template` fail with a diagnostic pointing at docs/tls.md.
+  tls:
+    # Name of a pre-existing Secret (type kubernetes.io/tls) holding tls.crt + tls.key (+ optional ca.crt).
+    # Leave empty to fall through to the cert-manager path.
+    existingSecret: ""
+
+    # Mount path for the TLS Secret inside the server + agent containers.
+    mountPath: /etc/certctl/tls
+
+    # cert-manager auto-provisioning. Opt-in (off by default per milestone §3.4).
+    certManager:
+      enabled: false
+
+      # Secret name the cert-manager Certificate CR writes into. Agents and the server
+      # both read from this Secret. If empty, defaults to "<fullname>-tls".
+      secretName: ""
+
+      # Cert-manager issuer reference.
+      issuerRef:
+        name: ""                      # e.g. "letsencrypt-prod" or "internal-ca"
+        kind: ClusterIssuer           # ClusterIssuer or Issuer
+        group: cert-manager.io
+
+      # Subject fields on the issued cert.
+      commonName: "certctl-server"
+      dnsNames:
+        - certctl-server
+        - localhost
+
+      # Certificate lifetime + renewal window.
+      duration: 2160h                 # 90 days
+      renewBefore: 360h               # 15 days
+
   # Service type (ClusterIP, LoadBalancer, NodePort)
   service:
     type: ClusterIP
     port: 8443
     annotations: {}
 
-  # Authentication configuration
+  # Authentication configuration.
+  # Valid types: "api-key" (production) or "none" (demo only — disables
+  # authentication on the API and logs a loud Warn at server startup).
+  # For JWT/OIDC, run an authenticating gateway in front of certctl
+  # (oauth2-proxy / Envoy ext_authz / Traefik ForwardAuth / Pomerium)
+  # and set type=none here so the gateway terminates federated identity.
+  # See docs/architecture.md "Authenticating-gateway pattern".
+  #
+  # G-1 (P1): pre-G-1 the chart accepted server.auth.type=jwt and the
+  # certctl-server container silently routed every request through the
+  # api-key bearer middleware — silent auth downgrade. Post-G-1 the
+  # chart's `certctl.validateAuthType` template helper rejects any value
+  # outside {api-key, none} at template time. See
+  # docs/upgrade-to-v2-jwt-removal.md if you previously set type=jwt.
   auth:
-    type: api-key  # Options: api-key, none (for demo only)
-    apiKey: ""     # REQUIRED in production - set via --set or values override
+    type: api-key
+    apiKey: ""     # REQUIRED when type=api-key (set via --set or values override).
 
   # Logging configuration
   logging:
@@ -221,7 +289,30 @@ postgresql:
   auth:
     database: certctl
     username: certctl
-    password: ""  # REQUIRED - set via --set or values override
+    # REQUIRED — set via `--set postgresql.auth.password=<value>` or values override.
+    #
+    # WARNING (U-1): rotating this value after first deploy does NOT change the
+    # database password. The `postgres:16-alpine` image runs `initdb` only when
+    # /var/lib/postgresql/data is empty, so POSTGRES_PASSWORD is written into
+    # pg_authid exactly once — on the first boot of the StatefulSet's PVC.
+    # Subsequent rollouts pick up the new env value in the postgres container
+    # but the certctl-server container's CERTCTL_DATABASE_URL also picks up
+    # the new value, while pg_authid still expects the old one — leading to
+    # `pq: password authentication failed for user "certctl"` (SQLSTATE 28P01).
+    #
+    # The certctl-server emits guidance via internal/repository/postgres/db.go::
+    # wrapPingError when it sees SQLSTATE 28P01 at startup. To resolve in a
+    # Helm deployment:
+    #   - Non-destructive (preferred for environments with data):
+    #       kubectl exec -it <release>-postgres-0 -- \
+    #         psql -U certctl -c "ALTER ROLE certctl PASSWORD '<new>';"
+    #     then update the secret/values to match and let the certctl-server
+    #     pod restart against the matching credential.
+    #   - Destructive (DESTROYS DATA — only acceptable on dev/demo PVCs):
+    #       helm uninstall <release> && \
+    #       kubectl delete pvc -l app.kubernetes.io/name=certctl,app.kubernetes.io/component=postgres && \
+    #       helm install <release> ...  # PVC re-creates empty, initdb seeds new password
+    password: ""
 
   # Storage configuration
   storage:
@@ -356,7 +447,16 @@ ingress:
   className: ""
   annotations: {}
     # kubernetes.io/ingress.class: nginx
-    # cert-manager.io/cluster-issuer: letsencrypt-prod
+
+  # Optional cert-manager integration for the public-facing Ingress cert.
+  # This is completely independent of server.tls.* — the Ingress terminates
+  # an *additional* TLS hop between the internet and the in-cluster Service.
+  # Leave disabled unless an Ingress is exposing certctl to the outside world.
+  certManager:
+    enabled: false
+    issuerRef:
+      name: ""                      # e.g. "letsencrypt-prod"
+      kind: ClusterIssuer           # ClusterIssuer or Issuer
   hosts:
     - host: certctl.local
       paths:

deploy/test/healthcheck_test.go

@@ -0,0 +1,216 @@
+//go:build integration
+
+// Package integration_test — image-level HEALTHCHECK contract.
+//
+// U-2 (P1, cat-u-healthcheck_protocol_mismatch): pre-U-2 the published
+// server image's Dockerfile HEALTHCHECK called `curl -f http://localhost:
+// 8443/health` against an HTTPS-only listener (HTTPS-Everywhere milestone,
+// v2.2 / tag v2.0.47). Operators outside docker-compose / Helm saw the
+// container reported as `unhealthy` indefinitely. The compose stack
+// overrode this HEALTHCHECK with `--cacert + https://`; the Helm chart
+// uses explicit `httpGet` probes that ignore Docker's HEALTHCHECK; the 5
+// example compose files all override with `curl -sfk https://localhost:
+// 8443/health`. So the observable failure was scoped to bare `docker run`
+// / Docker Swarm / Nomad / ECS users — exactly the "I just pulled the
+// published image" path.
+//
+// This file's tests pin the contract at the binary-image level. The
+// matching CI grep guardrail in .github/workflows/ci.yml catches the
+// regression at the Dockerfile-source level; both layers are needed
+// because someone could replace the HEALTHCHECK line with a sibling
+// broken pattern that the grep doesn't catch (e.g., a TCP-only check
+// against the HTTPS port).
+//
+// Run alongside the rest of the integration suite:
+//
+//	cd deploy/test && go test -tags integration -v -run Healthcheck
+//
+// The tests skip cleanly with t.Skip when docker is not available
+// (CI without docker-in-docker, sandbox environments, etc.) so they
+// don't block local development on machines without docker.
+package integration_test
+
+import (
+	"encoding/json"
+	"os/exec"
+	"strings"
+	"testing"
+	"time"
+)
+
+// dockerAvailable returns true when `docker version` returns 0.
+// We cache it across tests in this file so the skip message prints once.
+func dockerAvailable(t *testing.T) bool {
+	t.Helper()
+	cmd := exec.Command("docker", "version", "--format", "{{.Server.Version}}")
+	out, err := cmd.CombinedOutput()
+	if err != nil {
+		t.Logf("docker not available: %v\noutput: %s", err, string(out))
+		return false
+	}
+	return true
+}
+
+// dockerCmd runs `docker <args...>` with a 60s budget, returning stdout
+// + stderr combined and the exit error if any. Used for short-lived
+// probes (inspect, build, run -d).
+func dockerCmd(t *testing.T, timeout time.Duration, args ...string) (string, error) {
+	t.Helper()
+	cmd := exec.Command("docker", args...)
+	done := make(chan struct{})
+	var out []byte
+	var err error
+	go func() {
+		out, err = cmd.CombinedOutput()
+		close(done)
+	}()
+	select {
+	case <-done:
+		return string(out), err
+	case <-time.After(timeout):
+		_ = cmd.Process.Kill()
+		t.Fatalf("docker %v timed out after %v", args, timeout)
+		return "", err
+	}
+}
+
+// TestPublishedServerImage_HealthcheckSpecUsesHTTPS performs the Dockerfile-
+// source-level shipped-shape pin: the inspected image's Healthcheck.Test
+// array MUST contain "https://localhost:8443/health" (and MUST NOT
+// contain "http://localhost:8443/health"). This is the lightweight half
+// of the contract — it doesn't require running the container, only
+// building it. It catches the audit-flagged bug directly.
+func TestPublishedServerImage_HealthcheckSpecUsesHTTPS(t *testing.T) {
+	if !dockerAvailable(t) {
+		t.Skip("docker not available — skipping image-level HEALTHCHECK test")
+	}
+
+	const imgTag = "certctl-u2-healthcheck-spec-test"
+	t.Cleanup(func() {
+		_, _ = dockerCmd(t, 30*time.Second, "rmi", "-f", imgTag)
+	})
+
+	// Build the server image. Use the repo root as context (this test
+	// file lives at deploy/test/, the Dockerfile at the repo root).
+	buildOut, err := dockerCmd(t, 5*time.Minute,
+		"build", "-f", "../../Dockerfile", "-t", imgTag, "../..")
+	if err != nil {
+		t.Fatalf("docker build failed: %v\noutput:\n%s", err, buildOut)
+	}
+
+	// Inspect the shipped HEALTHCHECK metadata.
+	inspectOut, err := dockerCmd(t, 30*time.Second,
+		"inspect", "--format", "{{json .Config.Healthcheck}}", imgTag)
+	if err != nil {
+		t.Fatalf("docker inspect failed: %v\noutput:\n%s", err, inspectOut)
+	}
+
+	var hc struct {
+		Test     []string
+		Interval int64
+		Timeout  int64
+	}
+	if err := json.Unmarshal([]byte(strings.TrimSpace(inspectOut)), &hc); err != nil {
+		t.Fatalf("could not parse Healthcheck JSON %q: %v", inspectOut, err)
+	}
+
+	joined := strings.Join(hc.Test, " ")
+
+	// Positive contract.
+	if !strings.Contains(joined, "https://localhost:8443/health") {
+		t.Errorf("Healthcheck.Test does not target https://localhost:8443/health\nfull: %v", hc.Test)
+	}
+
+	// Negative contract — pre-U-2 regression shape MUST be absent.
+	if strings.Contains(joined, "http://localhost:8443/health") {
+		t.Errorf("Healthcheck.Test still contains the pre-U-2 plaintext shape: %v", hc.Test)
+	}
+
+	// `-k` (or `--insecure`) must be present because the bootstrap cert
+	// is per-deploy and the published image can't pin a CA bundle —
+	// see the U-2 closure docblock on Dockerfile and the audit doc.
+	if !strings.Contains(joined, "-k") && !strings.Contains(joined, "--insecure") {
+		t.Errorf("Healthcheck.Test omits -k / --insecure flag (required for self-signed bootstrap probe): %v", hc.Test)
+	}
+}
+
+// TestPublishedAgentImage_HealthcheckSpecExists pins the U-2 adjacent
+// fix that added a HEALTHCHECK to the agent image. Pre-U-2 the agent
+// image had no HEALTHCHECK declaration, so bare-`docker run` agents got
+// `none` health status from Docker. Post-U-2 the agent uses pgrep to
+// verify the process is alive (mirroring the docker-compose pattern at
+// deploy/docker-compose.yml:173, which also became reliable post-U-2
+// because procps is now installed in the runtime image).
+func TestPublishedAgentImage_HealthcheckSpecExists(t *testing.T) {
+	if !dockerAvailable(t) {
+		t.Skip("docker not available — skipping image-level HEALTHCHECK test")
+	}
+
+	const imgTag = "certctl-u2-agent-healthcheck-spec-test"
+	t.Cleanup(func() {
+		_, _ = dockerCmd(t, 30*time.Second, "rmi", "-f", imgTag)
+	})
+
+	buildOut, err := dockerCmd(t, 5*time.Minute,
+		"build", "-f", "../../Dockerfile.agent", "-t", imgTag, "../..")
+	if err != nil {
+		t.Fatalf("docker build failed: %v\noutput:\n%s", err, buildOut)
+	}
+
+	inspectOut, err := dockerCmd(t, 30*time.Second,
+		"inspect", "--format", "{{json .Config.Healthcheck}}", imgTag)
+	if err != nil {
+		t.Fatalf("docker inspect failed: %v\noutput:\n%s", err, inspectOut)
+	}
+
+	trimmed := strings.TrimSpace(inspectOut)
+	if trimmed == "null" || trimmed == "" {
+		t.Fatalf("agent image has no HEALTHCHECK (got %q) — U-2 adjacent fix regressed", inspectOut)
+	}
+
+	var hc struct {
+		Test []string
+	}
+	if err := json.Unmarshal([]byte(trimmed), &hc); err != nil {
+		t.Fatalf("could not parse Healthcheck JSON %q: %v", inspectOut, err)
+	}
+
+	joined := strings.Join(hc.Test, " ")
+	if !strings.Contains(joined, "pgrep") {
+		t.Errorf("agent Healthcheck.Test does not use pgrep (lost the process-presence shape): %v", hc.Test)
+	}
+	if !strings.Contains(joined, "certctl-agent") {
+		t.Errorf("agent Healthcheck.Test does not target the certctl-agent process name: %v", hc.Test)
+	}
+}
+
+// TestPublishedServerImage_HealthcheckTransitionsToHealthy is the
+// runtime-level contract: the built image, when started, must transition
+// to `healthy` within the start-period + 30s observability budget. This
+// is the heavy test — it requires the server to actually start, which
+// in turn requires either a reachable database OR a startup that fails
+// gracefully enough to keep the HEALTHCHECK probe target alive.
+//
+// The container is started with CERTCTL_DATABASE_URL pointing at an
+// unreachable host so the server fails its postgres bring-up — but
+// importantly, fails AFTER the TLS listener has come up, because the
+// HEALTHCHECK probe target is the TLS listener. We don't actually need
+// the database to validate the HEALTHCHECK shape.
+//
+// IMPORTANT: this test is the runtime contract. If you're working on the
+// server's startup ordering and the listener now comes up AFTER the
+// database, this test must adapt — start a sidecar postgres via
+// testcontainers-go (see internal/integration/lifecycle_test.go for the
+// pattern) and connect the certctl-server container to it.
+func TestPublishedServerImage_HealthcheckTransitionsToHealthy(t *testing.T) {
+	if !dockerAvailable(t) {
+		t.Skip("docker not available — skipping runtime HEALTHCHECK test")
+	}
+	if testing.Short() {
+		t.Skip("runtime HEALTHCHECK test takes ~45s; skipping under -short")
+	}
+	t.Skip("runtime probe contract not yet wired to a sidecar postgres; " +
+		"image-spec contract above (TestPublishedServerImage_HealthcheckSpecUsesHTTPS) " +
+		"covers the audit-flagged regression. Re-enable once the integration " +
+		"harness provisions postgres for image-level smoke.")
+}

deploy/test/integration_test.go

@@ -47,11 +47,30 @@ func envOr(key, fallback string) string {
 	return fallback
 }
 
+// HTTPS-Everywhere Phase 6: the test harness now dials the server over TLS and
+// validates the self-signed cert against the init-container-generated CA bundle
+// bind-mounted at ./test/certs/ca.crt. The defaults assume the compose setup in
+// deploy/docker-compose.test.yml; override via the usual env vars when pointing
+// the suite at a different deployment.
+//
+//   - CERTCTL_TEST_SERVER_URL  — must be https:// for the Phase 6 wiring
+//   - CERTCTL_TEST_CA_BUNDLE   — PEM bundle; must contain the server's issuing
+//     CA (self-signed in the compose setup, so server.crt doubles as ca.crt)
+//   - CERTCTL_TEST_INSECURE    — set to "true" to fall back to
+//     InsecureSkipVerify when the CA bundle path is unavailable (CI smoke or
+//     exploratory runs only — CI-parity runs MUST use the pinned bundle).
+//
+// Under no circumstance does the suite silently downgrade to plaintext HTTP:
+// Phase 5 (#203) pre-flight guards in cmd/server will refuse to start with an
+// http:// URL anyway, so a misconfiguration fails loud at test-harness startup
+// rather than flaking mid-suite.
 var (
-	serverURL = envOr("CERTCTL_TEST_SERVER_URL", "http://localhost:8443")
-	apiKey    = envOr("CERTCTL_TEST_API_KEY", "test-key-2026")
-	dbURL     = envOr("CERTCTL_TEST_DB_URL", "postgres://certctl:testpass@localhost:5432/certctl?sslmode=disable")
-	nginxTLS  = envOr("CERTCTL_TEST_NGINX_TLS", "localhost:8444")
+	serverURL    = envOr("CERTCTL_TEST_SERVER_URL", "https://localhost:8443")
+	apiKey       = envOr("CERTCTL_TEST_API_KEY", "test-key-2026")
+	dbURL        = envOr("CERTCTL_TEST_DB_URL", "postgres://certctl:testpass@localhost:5432/certctl?sslmode=disable")
+	nginxTLS     = envOr("CERTCTL_TEST_NGINX_TLS", "localhost:8444")
+	caBundlePath = envOr("CERTCTL_TEST_CA_BUNDLE", "./certs/ca.crt")
+	insecureTLS  = strings.EqualFold(os.Getenv("CERTCTL_TEST_INSECURE"), "true")
 )
 
 // ---------------------------------------------------------------------------
@@ -75,16 +94,74 @@ type testClient struct {
 	apiKey  string
 }
 
+// buildTLSConfig wires up the x509.CertPool with the self-signed CA bundle
+// emitted by the certctl-tls-init container. Panics via t.Fatal on the happy
+// path if both CERTCTL_TEST_CA_BUNDLE is unreadable *and* CERTCTL_TEST_INSECURE
+// is not set — that combination is almost always a misconfigured test harness
+// and silently downgrading to InsecureSkipVerify would hide real failures.
+//
+// MinVersion is pinned to TLS 1.3 so this matches what cmd/server negotiates
+// by default; a drift there would surface here first.
+func buildTLSConfig() *tls.Config {
+	cfg := &tls.Config{
+		MinVersion: tls.VersionTLS13,
+	}
+	if insecureTLS {
+		// Opt-in smoke-run mode; log but don't fail so operators running
+		// `CERTCTL_TEST_INSECURE=true go test -tags integration ./deploy/test/...`
+		// against an ad-hoc environment still get a green suite when the server
+		// is reachable. CI must not set this.
+		cfg.InsecureSkipVerify = true
+		return cfg
+	}
+	pem, err := os.ReadFile(caBundlePath)
+	if err != nil {
+		// Can't use t.Fatal here (called from package-level helpers); fall
+		// back to a panic so the harness dies loud at the first HTTP call.
+		// Operators see a clear "CA bundle missing" message and fix their
+		// setup instead of chasing a confusing TLS handshake error.
+		panic(fmt.Sprintf("integration test: read CA bundle %q: %v — "+
+			"run `docker compose -f deploy/docker-compose.test.yml up` first, or "+
+			"set CERTCTL_TEST_CA_BUNDLE to a valid PEM path, or "+
+			"set CERTCTL_TEST_INSECURE=true for a smoke run", caBundlePath, err))
+	}
+	pool := x509.NewCertPool()
+	if !pool.AppendCertsFromPEM(pem) {
+		panic(fmt.Sprintf("integration test: no PEM certificates parsed from %q", caBundlePath))
+	}
+	cfg.RootCAs = pool
+	return cfg
+}
+
+// newTestClient builds a Bearer-authenticated HTTPS client pinned to the
+// init-container CA. Every phase uses this for REST calls.
 func newTestClient() *testClient {
 	return &testClient{
 		http: &http.Client{
 			Timeout: 30 * time.Second,
+			Transport: &http.Transport{
+				TLSClientConfig: buildTLSConfig(),
+			},
 		},
 		baseURL: serverURL,
 		apiKey:  apiKey,
 	}
 }
 
+// newUnauthHTTPClient returns an *http.Client with the same TLS configuration
+// but no Bearer token. Used for the Phase 7 RFC 5280 CRL / RFC 8615
+// `/.well-known/pki/*` probes — those endpoints must be reachable by
+// *unauthenticated* relying parties per M-006, so we explicitly omit the
+// Authorization header to prove it.
+func newUnauthHTTPClient() *http.Client {
+	return &http.Client{
+		Timeout: 30 * time.Second,
+		Transport: &http.Transport{
+			TLSClientConfig: buildTLSConfig(),
+		},
+	}
+}
+
 func (c *testClient) do(method, path string, body io.Reader) (*http.Response, error) {
 	url := c.baseURL + path
 	req, err := http.NewRequest(method, url, body)
@@ -195,16 +272,11 @@ type metricsResponse struct {
 	Uptime  float64                `json:"uptime_seconds"`
 }
 
-// crlResponse for the CRL endpoint.
-type crlResponse struct {
-	Version int `json:"version"`
-	Total   int `json:"total"`
-	Entries []struct {
-		Serial    string `json:"serial_number"`
-		Reason    string `json:"reason"`
-		RevokedAt string `json:"revoked_at"`
-	} `json:"entries"`
-}
+// M-006: The non-standard JSON CRL endpoint (`GET /api/v1/crl`) was removed.
+// RFC 5280 §5 defines only the DER wire format, which is now served
+// unauthenticated at `/.well-known/pki/crl/{issuer_id}` per RFC 8615.
+// The `crlResponse` Go struct that used to decode the JSON envelope is gone;
+// Phase 7 parses the DER bytes directly via `x509.ParseRevocationList`.
 
 // ---------------------------------------------------------------------------
 // PostgreSQL test helper
@@ -728,18 +800,48 @@ func TestIntegrationSuite(t *testing.T) {
 			t.Fatalf("revocation response unexpected: %s", body)
 		}
 
-		// Check CRL
-		t.Run("CRL", func(t *testing.T) {
-			resp, err := c.Get("/api/v1/crl")
+		// Check DER CRL served unauthenticated under /.well-known/pki/ per
+		// RFC 5280 §5 + RFC 8615 (M-006). Use newUnauthHTTPClient() — no
+		// Bearer token — to prove the endpoint is reachable by relying
+		// parties that have no certctl API credentials. Post HTTPS-Everywhere
+		// (M-007, Phase 6) the client still speaks TLS 1.3 against the pinned
+		// CA bundle from ./certs/ca.crt; we just skip the Authorization header
+		// to exercise the unauthenticated RFC 5280 / RFC 8615 relying-party
+		// path. Switching from the stdlib http.DefaultClient (plaintext OK,
+		// system trust store only) to the helper keeps the no-auth semantic
+		// while preventing silent plaintext downgrade — the whole point of
+		// this milestone.
+		t.Run("CRL_DER_Unauthenticated", func(t *testing.T) {
+			resp, err := newUnauthHTTPClient().Get(serverURL + "/.well-known/pki/crl/iss-local")
 			if err != nil {
-				t.Fatalf("GET CRL: %v", err)
+				t.Fatalf("GET DER CRL: %v", err)
 			}
-			var crl crlResponse
-			if err := decodeJSON(resp, &crl); err != nil {
-				t.Fatalf("decode CRL: %v", err)
+			defer resp.Body.Close()
+
+			if resp.StatusCode != http.StatusOK {
+				body, _ := io.ReadAll(resp.Body)
+				t.Fatalf("unexpected status: got %d, want 200 (body=%s)", resp.StatusCode, string(body))
 			}
-			if crl.Total < 1 {
-				t.Fatalf("CRL total: got %d, want >= 1", crl.Total)
+			if ct := resp.Header.Get("Content-Type"); ct != "application/pkix-crl" {
+				t.Errorf("Content-Type: got %q, want %q", ct, "application/pkix-crl")
+			}
+
+			body, err := io.ReadAll(resp.Body)
+			if err != nil {
+				t.Fatalf("read CRL body: %v", err)
+			}
+			if len(body) == 0 {
+				t.Fatal("CRL body empty")
+			}
+
+			// Parse the DER bytes as an X.509 CRL (RFC 5280) and verify the
+			// just-revoked certificate is listed.
+			crl, err := x509.ParseRevocationList(body)
+			if err != nil {
+				t.Fatalf("parse DER CRL: %v", err)
+			}
+			if len(crl.RevokedCertificateEntries) < 1 {
+				t.Fatalf("CRL entries: got %d, want >= 1", len(crl.RevokedCertificateEntries))
 			}
 		})
 
@@ -1123,4 +1225,243 @@ func TestIntegrationSuite(t *testing.T) {
 			}
 		})
 	})
+
+	// -----------------------------------------------------------------------
+	// Phase 13: I-005 Phase 1 Red — Notification Retry + Dead Letter Queue (E2E)
+	//
+	// Pins the full retry-loop contract end-to-end. Phase 2 Green must turn
+	// every subtest Green with a single coherent change set (migration 000016
+	// live, scheduler notificationRetryLoop wired as the 11th loop bumping
+	// the total from 10 → 11, service RetryFailedNotifications + MarkAsDead +
+	// RequeueNotification implemented, handler POST
+	// /api/v1/notifications/{id}/requeue routed, list handler parsing the
+	// status query param).
+	//
+	// Subtests:
+	//
+	//   1. MarkAsDead_OnMaxAttempts — a notification seeded at retry_count=4
+	//      (one failure shy of the max_attempts=5 gate) with next_retry_at in
+	//      the past is promoted to status='dead' on the first retry-loop
+	//      tick. The pre-increment arithmetic `retry_count + 1 = 5 =
+	//      max_attempts` triggers MarkAsDead instead of scheduling another
+	//      retry.
+	//
+	//   2. Requeue_FlipsDeadToPending — POST
+	//      /api/v1/notifications/{id}/requeue on a dead row flips status back
+	//      to 'pending', resets retry_count to 0, and clears next_retry_at
+	//      so the existing ProcessPendingNotifications loop (not the retry
+	//      sweep) picks it up on its next tick.
+	//
+	//   3. ListFilter_StatusDead — GET /api/v1/notifications?status=dead
+	//      returns only rows in status='dead' so the UI's Dead Letter tab
+	//      (web/src/pages/NotificationsPage.test.tsx subtest #1) can isolate
+	//      them without client-side filtering.
+	//
+	// Red behavior at HEAD (what Phase 2 Green must flip):
+	//
+	//   * Schema: the INSERTs reference retry_count, next_retry_at,
+	//     last_error. Migration 000016 is already written (file (a) of
+	//     Phase 1 Red) but until it is applied the INSERTs fail with
+	//     "column does not exist" — schema-level Red halt.
+	//
+	//   * Subtest 1: no retry loop exists at HEAD. The seeded row stays at
+	//     status='failed' retry_count=4 forever. The 4-minute waitFor
+	//     therefore times out.
+	//
+	//   * Subtest 2: /notifications/{id}/requeue is not routed at HEAD
+	//     (internal/api/handler/notifications.go registers only list / get /
+	//     mark-read). The POST returns 404.
+	//
+	//   * Subtest 3: the list handler does not parse the status query param
+	//     at HEAD. The response includes rows of every status, so the
+	//     "leaked non-dead row" assertion fires.
+	// -----------------------------------------------------------------------
+	t.Run("Phase13_NotificationRetryDLQ", func(t *testing.T) {
+		// Unreachable endpoint so every webhook delivery attempt fails
+		// deterministically — port 1 is never bound. Pinning retry_count=4
+		// + a guaranteed-failing channel is what turns the seeded row into
+		// 'dead' on the very next scheduler tick (one delivery attempt,
+		// retry_count 4→5, crosses max_attempts=5 → MarkAsDead).
+		const blackHole = "http://127.0.0.1:1/i005-red-black-hole"
+
+		// ---------------------------------------------------------------
+		// Subtest 1: failed → dead transition after one retry-loop tick
+		// ---------------------------------------------------------------
+		t.Run("MarkAsDead_OnMaxAttempts", func(t *testing.T) {
+			id := fmt.Sprintf("notif-i005-dead-%d", time.Now().UnixNano())
+
+			// retry_count=4 + next attempt = 5 = max_attempts → MarkAsDead.
+			// next_retry_at is backdated so the row is immediately eligible
+			// for the retry sweep rather than having to wait for its own
+			// backoff to elapse.
+			past := time.Now().Add(-30 * time.Second).UTC()
+			db.Exec(t, `
+				INSERT INTO notification_events
+				  (id, type, channel, recipient, message, status,
+				   retry_count, next_retry_at, last_error)
+				VALUES ($1, $2, $3, $4, $5, $6, $7, $8, $9)
+			`,
+				id, "ExpirationWarning", "Webhook", blackHole,
+				"I-005 integration: DLQ promotion on max_attempts",
+				"failed", 4, past, "transient webhook 500",
+			)
+
+			// Give the retry sweep up to 4m to tick at least once (default
+			// 2m interval + seed/sweep/notifier slop). On success the row
+			// carries status='dead' and retry_count has advanced to 5.
+			waitFor(t, "notification transitions to dead", 4*time.Minute, 5*time.Second,
+				func() (bool, error) {
+					var status string
+					var retry int
+					err := db.db.QueryRow(
+						"SELECT status, retry_count FROM notification_events WHERE id = $1",
+						id,
+					).Scan(&status, &retry)
+					if err != nil {
+						return false, err
+					}
+					return strings.EqualFold(status, "dead") && retry >= 5, nil
+				})
+
+			// The dead-letter tab is only useful if operators can see why
+			// the row died. MarkAsDead must preserve the most recent
+			// failure string in last_error rather than nil'ing it.
+			var lastErr sql.NullString
+			if err := db.db.QueryRow(
+				"SELECT last_error FROM notification_events WHERE id = $1", id,
+			).Scan(&lastErr); err != nil {
+				t.Fatalf("read last_error: %v", err)
+			}
+			if !lastErr.Valid || lastErr.String == "" {
+				t.Errorf("dead notification %s has empty last_error — "+
+					"retry loop must preserve the most recent failure", id)
+			}
+		})
+
+		// ---------------------------------------------------------------
+		// Subtest 2: dead → pending via manual Requeue endpoint
+		// ---------------------------------------------------------------
+		t.Run("Requeue_FlipsDeadToPending", func(t *testing.T) {
+			id := fmt.Sprintf("notif-i005-requeue-%d", time.Now().UnixNano())
+
+			// Seed directly at status='dead' rather than waiting for a
+			// scheduler tick — this subtest isolates the requeue handler,
+			// not the retry loop (subtest 1 already pins that).
+			past := time.Now().Add(-10 * time.Minute).UTC()
+			db.Exec(t, `
+				INSERT INTO notification_events
+				  (id, type, channel, recipient, message, status,
+				   retry_count, next_retry_at, last_error)
+				VALUES ($1, $2, $3, $4, $5, $6, $7, $8, $9)
+			`,
+				id, "ExpirationWarning", "Webhook", blackHole,
+				"I-005 integration: manual requeue",
+				"dead", 5, past, "max attempts reached",
+			)
+
+			resp, err := c.Post("/api/v1/notifications/"+id+"/requeue", "")
+			if err != nil {
+				t.Fatalf("POST requeue: %v", err)
+			}
+			body := readBody(resp)
+			if resp.StatusCode != http.StatusOK {
+				t.Fatalf("requeue status %d, want 200 (body: %s)",
+					resp.StatusCode, body)
+			}
+			// Phase 2 Green handler responds with {"status":"requeued"}
+			// to mirror MarkAsRead's {"status":"marked_as_read"} envelope.
+			if !strings.Contains(body, "requeued") {
+				t.Errorf("requeue body missing 'requeued' marker: %s", body)
+			}
+
+			// DB must reflect the full flip: pending status, reset counter,
+			// cleared next_retry_at. Clearing next_retry_at is what moves
+			// the row out of the retry-sweep partial index and back under
+			// ProcessPendingNotifications.
+			var status string
+			var retry int
+			var nextRetry sql.NullTime
+			if err := db.db.QueryRow(`
+				SELECT status, retry_count, next_retry_at
+				  FROM notification_events WHERE id = $1
+			`, id).Scan(&status, &retry, &nextRetry); err != nil {
+				t.Fatalf("read requeued row: %v", err)
+			}
+			if !strings.EqualFold(status, "pending") {
+				t.Errorf("after requeue: status=%q, want 'pending'", status)
+			}
+			if retry != 0 {
+				t.Errorf("after requeue: retry_count=%d, want 0", retry)
+			}
+			if nextRetry.Valid {
+				t.Errorf("after requeue: next_retry_at=%v, want NULL",
+					nextRetry.Time)
+			}
+		})
+
+		// ---------------------------------------------------------------
+		// Subtest 3: GET /notifications?status=dead isolates DLQ rows
+		// ---------------------------------------------------------------
+		t.Run("ListFilter_StatusDead", func(t *testing.T) {
+			suffix := fmt.Sprintf("%d", time.Now().UnixNano())
+			deadID := "notif-i005-filter-dead-" + suffix
+			pendingID := "notif-i005-filter-pending-" + suffix
+
+			// One row at each end of the lifecycle so we can prove the
+			// filter both matches and excludes.
+			db.Exec(t, `
+				INSERT INTO notification_events
+				  (id, type, channel, recipient, message, status, retry_count)
+				VALUES ($1, 'ExpirationWarning', 'Webhook', $2,
+				        'I-005 filter test: dead row', 'dead', 5)
+			`, deadID, blackHole)
+			db.Exec(t, `
+				INSERT INTO notification_events
+				  (id, type, channel, recipient, message, status, retry_count)
+				VALUES ($1, 'ExpirationWarning', 'Webhook', $2,
+				        'I-005 filter test: pending row', 'pending', 0)
+			`, pendingID, blackHole)
+
+			// per_page large enough to rule out pagination artifacts as
+			// the reason a seeded row might be missing from the response.
+			resp, err := c.Get("/api/v1/notifications?status=dead&per_page=500")
+			if err != nil {
+				t.Fatalf("GET notifications?status=dead: %v", err)
+			}
+			var pr pagedResponse
+			if err := decodeJSON(resp, &pr); err != nil {
+				t.Fatalf("decode: %v", err)
+			}
+
+			type row struct {
+				ID     string `json:"id"`
+				Status string `json:"status"`
+			}
+			var rows []row
+			if err := json.Unmarshal(pr.Data, &rows); err != nil {
+				t.Fatalf("unmarshal rows: %v", err)
+			}
+
+			var sawDead, sawPending bool
+			for _, r := range rows {
+				if r.ID == deadID {
+					sawDead = true
+				}
+				if r.ID == pendingID {
+					sawPending = true
+				}
+				if !strings.EqualFold(r.Status, "dead") {
+					t.Errorf("status=dead filter leaked non-dead row: "+
+						"id=%s status=%s", r.ID, r.Status)
+				}
+			}
+			if !sawDead {
+				t.Errorf("status=dead filter missed seeded dead row %s", deadID)
+			}
+			if sawPending {
+				t.Errorf("status=dead filter leaked seeded pending row %s",
+					pendingID)
+			}
+		})
+	})
 }

deploy/test/qa_test.go

@@ -19,15 +19,29 @@
 //
 // Environment overrides:
 //
-//	CERTCTL_QA_SERVER_URL  (default: http://localhost:8443)
-//	CERTCTL_QA_API_KEY     (default: change-me-in-production)
-//	CERTCTL_QA_DB_URL      (default: postgres://certctl:certctl@localhost:5432/certctl?sslmode=disable)
-//	CERTCTL_QA_REPO_DIR    (default: ../.. — the certctl repo root)
+//	CERTCTL_QA_SERVER_URL     (default: https://localhost:8443)
+//	CERTCTL_QA_API_KEY        (default: change-me-in-production)
+//	CERTCTL_QA_DB_URL         (default: postgres://certctl:certctl@localhost:5432/certctl?sslmode=disable)
+//	CERTCTL_QA_REPO_DIR       (default: ../.. — the certctl repo root)
+//	CERTCTL_QA_CA_BUNDLE      (default: ./certs/ca.crt — the demo stack's init container writes here)
+//	CERTCTL_QA_INSECURE       (default: false — set to "true" to skip TLS verify, e.g. before the init container finishes)
+//
+// TLS note (HTTPS-Everywhere M-007, Phase 6): the demo compose stack now
+// listens on https://localhost:8443 with a self-signed cert written by the
+// tls-init container. This suite pins the issuing CA via
+// CERTCTL_QA_CA_BUNDLE so cert rotation or a tampered proxy fails the
+// handshake instead of being silently trusted. CERTCTL_QA_INSECURE="true"
+// is an explicit opt-out for bootstrap scenarios — there is no silent
+// plaintext downgrade, matching the server-side pre-flight guard added in
+// Phase 5 (task #203).
 package integration_test
 
 import (
+	"crypto/tls"
+	"crypto/x509"
 	"database/sql"
 	"encoding/json"
+	"fmt"
 	"io"
 	"net/http"
 	"os"
@@ -49,10 +63,12 @@ func qaEnv(key, fallback string) string {
 }
 
 var (
-	qaServerURL = qaEnv("CERTCTL_QA_SERVER_URL", "http://localhost:8443")
-	qaAPIKey    = qaEnv("CERTCTL_QA_API_KEY", "change-me-in-production")
-	qaDBURL     = qaEnv("CERTCTL_QA_DB_URL", "postgres://certctl:certctl@localhost:5432/certctl?sslmode=disable")
-	qaRepoDir   = qaEnv("CERTCTL_QA_REPO_DIR", filepath.Join("..", ".."))
+	qaServerURL    = qaEnv("CERTCTL_QA_SERVER_URL", "https://localhost:8443")
+	qaAPIKey       = qaEnv("CERTCTL_QA_API_KEY", "change-me-in-production")
+	qaDBURL        = qaEnv("CERTCTL_QA_DB_URL", "postgres://certctl:certctl@localhost:5432/certctl?sslmode=disable")
+	qaRepoDir      = qaEnv("CERTCTL_QA_REPO_DIR", filepath.Join("..", ".."))
+	qaCABundlePath = qaEnv("CERTCTL_QA_CA_BUNDLE", "./certs/ca.crt")
+	qaInsecure     = strings.EqualFold(os.Getenv("CERTCTL_QA_INSECURE"), "true")
 )
 
 // ---------------------------------------------------------------------------
@@ -65,9 +81,38 @@ type qaClient struct {
 	apiKey  string
 }
 
+// buildQATLSConfig returns the *tls.Config used by every qaClient. TLS 1.3
+// minimum matches the server-side config pinned in Phase 2 (cmd/server).
+// When CERTCTL_QA_INSECURE=true we skip verification entirely — useful
+// when running against a compose stack where the tls-init container hasn't
+// written ca.crt yet, or when pointing at a dev server with a rotated cert.
+// Otherwise we pin CERTCTL_QA_CA_BUNDLE and panic on read/parse failure
+// rather than silently downgrading to the system trust store (which would
+// mask a missing init container).
+func buildQATLSConfig() *tls.Config {
+	cfg := &tls.Config{MinVersion: tls.VersionTLS13}
+	if qaInsecure {
+		cfg.InsecureSkipVerify = true
+		return cfg
+	}
+	pem, err := os.ReadFile(qaCABundlePath)
+	if err != nil {
+		panic(fmt.Sprintf("qa test: read CA bundle %q: %v — set CERTCTL_QA_CA_BUNDLE or CERTCTL_QA_INSECURE=true", qaCABundlePath, err))
+	}
+	pool := x509.NewCertPool()
+	if !pool.AppendCertsFromPEM(pem) {
+		panic(fmt.Sprintf("qa test: no PEM certificates parsed from %q", qaCABundlePath))
+	}
+	cfg.RootCAs = pool
+	return cfg
+}
+
 func newQAClient() *qaClient {
 	return &qaClient{
-		http:    &http.Client{Timeout: 30 * time.Second},
+		http: &http.Client{
+			Timeout:   30 * time.Second,
+			Transport: &http.Transport{TLSClientConfig: buildQATLSConfig()},
+		},
 		baseURL: qaServerURL,
 		apiKey:  qaAPIKey,
 	}
@@ -434,10 +479,19 @@ func TestQA(t *testing.T) {
 	// ===================================================================
 	t.Run("Part03_CertCRUD", func(t *testing.T) {
 		t.Run("Create_Minimal", func(t *testing.T) {
+			// C-001 scope-expansion: the handler's ValidateRequired
+			// contract now gates common_name, owner_id, team_id,
+			// issuer_id, name, and renewal_policy_id. A 3-field
+			// payload would 400 regardless of the id hint, so the
+			// "minimal" variant carries every required field.
 			code, body := c.bodyStr(t, "POST", "/api/v1/certificates", `{
 				"id": "mc-qa-minimal",
+				"name": "qa-minimal",
 				"common_name": "qa-minimal.example.com",
-				"issuer_id": "iss-local"
+				"issuer_id": "iss-local",
+				"owner_id": "o-alice",
+				"team_id": "t-platform",
+				"renewal_policy_id": "rp-standard"
 			}`)
 			if code != 201 && code != 200 {
 				t.Fatalf("create cert: status %d, body: %s", code, body)
@@ -447,11 +501,14 @@ func TestQA(t *testing.T) {
 		t.Run("Create_Full", func(t *testing.T) {
 			code, body := c.bodyStr(t, "POST", "/api/v1/certificates", `{
 				"id": "mc-qa-full",
+				"name": "qa-full",
 				"common_name": "qa-full.example.com",
 				"sans": ["qa-full-alt.example.com"],
 				"issuer_id": "iss-local",
 				"environment": "staging",
-				"owner_id": "o-alice"
+				"owner_id": "o-alice",
+				"team_id": "t-platform",
+				"renewal_policy_id": "rp-standard"
 			}`)
 			if code != 201 && code != 200 {
 				t.Fatalf("create cert: status %d, body: %s", code, body)
@@ -596,13 +653,37 @@ func TestQA(t *testing.T) {
 			}
 		})
 
-		t.Run("CRL_JSON", func(t *testing.T) {
-			code, body := c.bodyStr(t, "GET", "/api/v1/crl", "")
-			if code != 200 {
-				t.Fatalf("CRL = %d", code)
+		// M-006: The non-standard JSON CRL endpoint was removed. RFC 5280 §5
+		// defines only the DER wire format, now served unauthenticated at
+		// `/.well-known/pki/crl/{issuer_id}` per RFC 8615. Use a plain
+		// http.Get — no Bearer — to prove the endpoint is reachable by
+		// relying parties with no API credentials.
+		t.Run("CRL_DER_Unauthenticated", func(t *testing.T) {
+			resp, err := http.Get(qaServerURL + "/.well-known/pki/crl/iss-local")
+			if err != nil {
+				t.Fatalf("GET DER CRL: %v", err)
 			}
-			if !strings.Contains(body, "entries") {
-				t.Fatalf("CRL response missing entries field")
+			defer resp.Body.Close()
+			if resp.StatusCode != 200 {
+				b, _ := io.ReadAll(resp.Body)
+				t.Fatalf("CRL = %d (body=%s)", resp.StatusCode, string(b))
+			}
+			if ct := resp.Header.Get("Content-Type"); ct != "application/pkix-crl" {
+				t.Errorf("Content-Type: got %q, want %q", ct, "application/pkix-crl")
+			}
+			body, err := io.ReadAll(resp.Body)
+			if err != nil {
+				t.Fatalf("read CRL body: %v", err)
+			}
+			if len(body) == 0 {
+				t.Fatal("CRL body empty")
+			}
+			crl, err := x509.ParseRevocationList(body)
+			if err != nil {
+				t.Fatalf("parse DER CRL: %v", err)
+			}
+			if len(crl.RevokedCertificateEntries) < 1 {
+				t.Fatalf("CRL entries: got %d, want >= 1", len(crl.RevokedCertificateEntries))
 			}
 		})
 	})

deploy/test/run-test.sh

@@ -1,5 +1,30 @@
 #!/usr/bin/env bash
 # =============================================================================
+# DEPRECATED — prefer `go test -tags integration ./deploy/test/...`
+# =============================================================================
+#
+# This bash harness predates the Go integration test suite in
+# deploy/test/integration_test.go (build tag `integration`, 34 subtests across
+# 13 phases — health, agent heartbeat, Local CA issuance, ACME, step-ca, EST,
+# S/MIME, discovery, network scan, revocation + CRL, deployment verification).
+# The Go suite uses crypto/x509, crypto/tls, and database/sql to parse certs,
+# probe TLS, and talk to PostgreSQL directly — no openssl text-scraping or
+# brittle curl pipelines. It is the authoritative integration test surface as
+# of milestone M-007 (HTTPS Everywhere, Phase 6), where the test compose
+# stack wires the server on https://localhost:8443 behind a pinned CA bundle
+# at ./certs/ca.crt.
+#
+# Run the Go suite:
+#   (cd deploy && docker compose -f docker-compose.test.yml up -d --build)
+#   go test -tags integration -v -count=1 ./deploy/test/...
+#
+# Keep this bash script around because:
+#   * It is cited in docs/test-env.md and muscle-memory for contributors.
+#   * It exercises the CLI / curl path end-to-end (a different failure mode
+#     than the Go HTTP client path).
+# But any NEW integration coverage goes in integration_test.go — not here.
+#
+# =============================================================================
 # certctl End-to-End Test Script
 # =============================================================================
 #
@@ -32,10 +57,11 @@ set -euo pipefail
 # Config
 # ---------------------------------------------------------------------------
 COMPOSE_FILE="docker-compose.test.yml"
-API_URL="http://localhost:8443"
+API_URL="https://localhost:8443"
 API_KEY="test-key-2026"
 NGINX_TLS="localhost:8444"
 AUTH_HEADER="Authorization: Bearer ${API_KEY}"
+CACERT="./certs/ca.crt"
 
 # Flags
 BUILD=true
@@ -91,7 +117,7 @@ header() {
 # API helper: GET endpoint, return JSON body. Exits 1 on HTTP error.
 api_get() {
   local path="$1"
-  curl -sf -H "${AUTH_HEADER}" "${API_URL}${path}" 2>/dev/null
+  curl -sf --cacert "${CACERT}" -H "${AUTH_HEADER}" "${API_URL}${path}" 2>/dev/null
 }
 
 # API helper: POST with optional JSON body
@@ -99,10 +125,10 @@ api_post() {
   local path="$1"
   local body="${2:-}"
   if [ -n "$body" ]; then
-    curl -sf -X POST -H "${AUTH_HEADER}" -H "Content-Type: application/json" \
+    curl -sf --cacert "${CACERT}" -X POST -H "${AUTH_HEADER}" -H "Content-Type: application/json" \
       -d "$body" "${API_URL}${path}" 2>/dev/null
   else
-    curl -sf -X POST -H "${AUTH_HEADER}" "${API_URL}${path}" 2>/dev/null
+    curl -sf --cacert "${CACERT}" -X POST -H "${AUTH_HEADER}" "${API_URL}${path}" 2>/dev/null
   fi
 }
 
@@ -608,13 +634,22 @@ else
   fail "Revocation failed" "$REVOKE_RESP"
 fi
 
-info "Checking CRL..."
-CRL_RESP=$(api_get "/api/v1/crl" 2>/dev/null || echo '{"total":0}')
-CRL_TOTAL=$(echo "$CRL_RESP" | python3 -c "import sys,json; print(json.load(sys.stdin).get('total',0))" 2>/dev/null || echo 0)
-if [ "$CRL_TOTAL" -ge 1 ]; then
-  pass "CRL contains $CRL_TOTAL revoked certificate(s)"
+info "Checking DER CRL under /.well-known/pki (RFC 5280 §5, RFC 8615)..."
+# The JSON CRL endpoint (`GET /api/v1/crl`) was removed in M-006. RFC 5280
+# defines only the DER wire format, now served unauthenticated at
+# `/.well-known/pki/crl/{issuer_id}`. Fetch without the Bearer header to
+# prove the endpoint is reachable by relying parties with no API key.
+CRL_TMP=$(mktemp)
+CRL_HEADERS=$(mktemp)
+CRL_HTTP_CODE=$(curl -s -o "$CRL_TMP" -D "$CRL_HEADERS" -w "%{http_code}" "${API_URL}/.well-known/pki/crl/iss-local" 2>/dev/null || echo "000")
+CRL_SIZE=$(wc -c < "$CRL_TMP" | tr -d ' ')
+CRL_CONTENT_TYPE=$(awk 'tolower($1)=="content-type:" { sub(/\r$/,"",$2); print tolower($2) }' "$CRL_HEADERS" | head -n1)
+rm -f "$CRL_TMP" "$CRL_HEADERS"
+
+if [ "$CRL_HTTP_CODE" = "200" ] && [ "$CRL_CONTENT_TYPE" = "application/pkix-crl" ] && [ "$CRL_SIZE" -gt 0 ]; then
+  pass "DER CRL served unauthenticated (HTTP 200, Content-Type application/pkix-crl, ${CRL_SIZE} bytes)"
 else
-  fail "CRL empty after revocation"
+  fail "DER CRL fetch failed: HTTP=$CRL_HTTP_CODE Content-Type=$CRL_CONTENT_TYPE size=$CRL_SIZE"
 fi
 
 CERT_STATUS=$(api_get "/api/v1/certificates/mc-local-test" | python3 -c "import sys,json; print(json.load(sys.stdin).get('status',''))" 2>/dev/null || echo "unknown")

docs/architecture.md

@@ -61,7 +61,7 @@ flowchart TB
         API["REST API\n(Go net/http, :8443)"]
         SVC["Service Layer"]
         REPO["Repository Layer\n(database/sql + lib/pq)"]
-        SCHED["Background Scheduler\n7 loops"]
+        SCHED["Background Scheduler\n8 always-on + 4 optional loops"]
         DASH["Web Dashboard\n(React SPA)"]
     end
 
@@ -139,6 +139,16 @@ The agent runs two background loops: a heartbeat (every 60 seconds) to signal it
 
 **Agent groups (M11b):** Dynamic device grouping allows organizing agents by metadata criteria. Agent groups can match by OS, architecture, IP CIDR, and version. Groups support both dynamic matching (agents automatically join when criteria match) and manual membership (explicit include/exclude). Renewal policies can be scoped to agent groups via the `agent_group_id` foreign key. The GUI provides full CRUD management for agent groups with visual match criteria badges.
 
+**Agent soft-retirement (I-004):** `DELETE /api/v1/agents/{id}` is a soft-delete surface — the row is never removed. Retirement stamps `agents.retired_at` (TIMESTAMPTZ) and `agents.retired_reason` (TEXT) and flips the operational status to `Offline`. Default listings (`GET /api/v1/agents`, the dashboard stats counter, and the stale-offline sweeper) filter retired rows out via `AgentRepository.ListActive`; retired rows are surfaced only through the opt-in `GET /api/v1/agents/retired` view. The endpoint follows a preflight → block → escape-hatch contract:
+
+- **Clean retire** (no active dependencies) — `200 OK` with `RetireAgentResponse` (`cascade=false`, zero counts).
+- **Blocked by active dependencies** — `409 Conflict` with `BlockedByDependenciesResponse`. The three counts (`active_targets`, `active_certificates`, `pending_jobs`) tell the operator exactly which rows would be orphaned. The schema diverges from `ErrorResponse` because downstream dashboards parse the stable three-key shape.
+- **Force cascade** — `DELETE /api/v1/agents/{id}?force=true&reason=...`. `reason` is required (400 otherwise). Transactionally soft-retires downstream `deployment_targets`, cancels pending jobs, and soft-retires the agent, emitting an `agent_retirement_cascaded` audit event with actor + reason + per-bucket counts.
+- **Idempotent re-retire** — a retire attempt against an already-retired agent returns `204 No Content` with an empty body (no second audit event, no response shape — callers that POST again on a retry get a clean no-op).
+- **Sentinel refusal** — the four sentinel agent IDs (`server-scanner`, `cloud-aws-sm`, `cloud-azure-kv`, `cloud-gcp-sm`) back non-agent discovery subsystems (the network scanner and the three cloud secret-manager sources). They are refused unconditionally — even with `force=true` — via `ErrAgentIsSentinel` → `403 Forbidden`. The ID list lives in `internal/domain/connector.go` (`SentinelAgentIDs`) so handler, repository, and scheduler code can filter them without importing `service`.
+
+Retired agents receive `410 Gone` on subsequent heartbeats (`service.ErrAgentRetired`). `cmd/agent` treats 410 as a terminal signal and exits cleanly so retired agents stop phoning home. Migration `000015` flipped `deployment_targets.agent_id` from `ON DELETE CASCADE` to `ON DELETE RESTRICT`, making the old hard-delete path a schema error and forcing all retirement through this contract.
+
 ### Web Dashboard
 
 The web dashboard is the primary operational interface for certctl. It is built with Vite + React + TypeScript and uses TanStack Query for server state management (caching, background refetching, optimistic updates).
@@ -275,6 +285,9 @@ erDiagram
         text channel
         text recipient
         text status
+        int retry_count
+        timestamptz next_retry_at
+        text last_error
     }
     certificate_profiles {
         text id PK
@@ -335,7 +348,12 @@ erDiagram
     }
 ```
 
-Migrations are idempotent (`IF NOT EXISTS` on all CREATE statements, `ON CONFLICT (id) DO NOTHING` on all seed data) so they're safe to run multiple times — important for Docker Compose where both initdb and the server may run the same SQL.
+The ER diagram above documents **database shape**, not REST-API wire shape. Several columns are intentionally server-internal and never serialized to clients:
+
+- `agents.api_key_hash` — SHA-256 of the agent's plaintext API key, populated by `service.RegisterAgent` (`hashAPIKey(apiKey)` at `internal/service/agent.go`) and consumed by `repository.AgentRepository::GetByAPIKey` for the auth-lookup. **Not** exposed via the REST API, **not** echoed via CLI / MCP / agent registration response, **never** logged. Enforced by `internal/domain/connector.go::Agent.MarshalJSON` (G-2 audit closure, `cat-s5-apikey_leak`); the OpenAPI Agent schema explicitly excludes the field, the frontend `Agent` interface omits it, and a CI grep guardrail at `.github/workflows/ci.yml` blocks reintroduction.
+- `issuers.config` / `deployment_targets.config` — plaintext jsonb shadow of the AES-GCM-encrypted on-disk blob; the encrypted form lives on `EncryptedConfig []byte` (Go-only field tagged `json:"-"`).
+
+Migrations are idempotent (`IF NOT EXISTS` on all CREATE statements, `ON CONFLICT (id) DO NOTHING` on all seed data) so they're safe to run multiple times. Pre-U-3 (`cat-u-seed_initdb_schema_drift`, GitHub #10) the deploy compose stack mounted both a hand-curated subset of `migrations/*.up.sql` and `seed.sql` into postgres `/docker-entrypoint-initdb.d/` so initdb applied them on first boot, *and* the server re-applied the same files via `RunMigrations` on every start. The dual source of truth was the bug: every time a migration shipped that the seed depended on (e.g., 000013 added `policy_rules.severity`), the mount list had to be updated by hand, and missing the update crashed initdb on first boot. Post-U-3 the server is the single source of truth: postgres comes up with an empty schema, `RunMigrations` applies the entire ladder, then `RunSeed` lands the baseline seed (and `RunDemoSeed` lands the demo overlay when `CERTCTL_DEMO_SEED=true`). Helm has used this pattern since day one (postgres-init `emptyDir`); the docker-compose deploy now matches.
 
 ## Data Flow: Certificate Lifecycle
 
@@ -463,7 +481,7 @@ sequenceDiagram
     API-->>U: 200 OK
 ```
 
-The revocation is recorded in the `certificate_revocations` table (separate from the certificate status update) for CRL generation. The DER-encoded CRL at `GET /api/v1/crl/{issuer_id}` is generated on-demand by querying this table and signing with the issuing CA's key. The OCSP responder at `GET /api/v1/ocsp/{issuer_id}/{serial}` checks both the certificate status and the revocations table to return signed good/revoked/unknown responses.
+The revocation is recorded in the `certificate_revocations` table (separate from the certificate status update) for CRL generation. The DER-encoded CRL at `GET /.well-known/pki/crl/{issuer_id}` (RFC 5280 §5, RFC 8615) is generated on-demand by querying this table and signing with the issuing CA's key. The OCSP responder at `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 6960) checks both the certificate status and the revocations table to return signed good/revoked/unknown responses. Both endpoints are served unauthenticated — relying parties (TLS clients, hardware appliances, browsers) must be able to reach them without a certctl API key — and carry the IANA-registered media types `application/pkix-crl` and `application/ocsp-response` respectively.
 
 Short-lived certificates (those with profile TTL < 1 hour) return "good" from OCSP and are excluded from CRL — their rapid expiry is treated as sufficient revocation.
 
@@ -473,40 +491,55 @@ For compliance events requiring fleet-wide revocation (key compromise, CA distru
 
 ### 4. Automatic Renewal
 
-The control plane runs a scheduler with seven background loops:
+The control plane runs a scheduler with 8 always-on loops plus up to 4 optional loops (enabled by configuration). `internal/scheduler/scheduler.go:262-265` is the authoritative count.
 
 ```mermaid
 flowchart LR
     subgraph "Scheduler (Background Goroutines)"
         R["Renewal Checker\n⏱ every 1h"]
         J["Job Processor\n⏱ every 30s"]
+        JR["Job Retry\n⏱ every 5m"]
+        JT["Job Timeout\n⏱ every 10m"]
         H["Agent Health\n⏱ every 2m"]
         N["Notification Processor\n⏱ every 1m"]
+        NR["Notification Retry\n⏱ every 2m"]
         SL["Short-Lived Expiry\n⏱ every 30s"]
         NS["Network Scanner\n⏱ every 6h"]
         DG["Certificate Digest\n⏱ every 24h"]
+        HC["Endpoint Health\n⏱ every 60s"]
+        CD["Cloud Discovery\n⏱ every 6h"]
     end
 
     R -->|"Find expiring certs\nCreate renewal jobs"| DB[("PostgreSQL")]
     J -->|"Process pending jobs\nCoordinate issuance"| DB
+    JR -->|"Retry Failed jobs\nFailed→Pending"| DB
+    JT -->|"Reap stalled AwaitingCSR / AwaitingApproval jobs"| DB
     H -->|"Check heartbeat staleness\nMark agents offline"| DB
     N -->|"Send pending notifications\nEmail / Webhook / Slack"| DB
+    NR -->|"Retry failed notifications\n2^n-min backoff, DLQ after 5 attempts"| DB
     SL -->|"Expire short-lived certs\nMark as Expired"| DB
     NS -->|"Probe TLS endpoints\nStore discovered certs"| DB
     DG -->|"Generate & send HTML digest\nEmail to recipients"| DB
+    HC -->|"Probe deployed TLS endpoints\nState machine + mismatch"| DB
+    CD -->|"AWS SM / Azure KV / GCP SM\nFeed discovery pipeline"| DB
 ```
 
-| Loop | Interval | Timeout | Purpose |
-|------|----------|---------|---------|
-| Renewal checker | 1 hour | 5 minutes | Finds certificates approaching expiry, creates renewal jobs |
-| Job processor | 30 seconds | 2 minutes | Processes pending jobs (issuance, renewal, deployment) |
-| Agent health check | 2 minutes | 1 minute | Marks agents as offline if heartbeat is stale |
-| Notification processor | 1 minute | 1 minute | Sends pending notifications via configured channels |
-| Short-lived expiry | 30 seconds | 30 seconds | Marks expired short-lived certificates (profile TTL < 1 hour) |
-| Network scanner | 6 hours | 30 minutes | Probes TLS endpoints on configured CIDR ranges, stores discovered certs (M21, opt-in via `CERTCTL_NETWORK_SCAN_ENABLED`). CIDR size validated at API level — max /20 (4096 IPs) per range. |
-| Certificate digest | 24 hours | 5 minutes | Generates HTML email with certificate stats, expiration timeline, job health, agent count. Does NOT run on startup — waits for first scheduled tick. Configurable interval and recipients via `CERTCTL_DIGEST_INTERVAL` and `CERTCTL_DIGEST_RECIPIENTS`. Falls back to certificate owner emails if no explicit recipients configured. |
+| Loop | Interval | Always-on? | Purpose |
+|------|----------|------------|---------|
+| Renewal checker | 1 hour | Yes | Finds certificates approaching expiry (threshold-based or ARI-directed), creates renewal jobs |
+| Job processor | 30 seconds | Yes | Processes pending jobs (issuance, renewal, deployment) |
+| Job retry | 5 minutes (`CERTCTL_SCHEDULER_RETRY_INTERVAL`) | Yes | Transitions `Failed` jobs back to `Pending` for re-dispatch (I-001) |
+| Job timeout | 10 minutes (`CERTCTL_JOB_TIMEOUT_INTERVAL`) | Yes | Reaps `AwaitingCSR` jobs older than 24h and `AwaitingApproval` jobs older than 7d to `Failed`, feeding the retry loop (I-003) |
+| Agent health check | 2 minutes | Yes | Marks agents as offline if heartbeat is stale |
+| Notification processor | 1 minute | Yes | Sends pending notifications via configured channels |
+| Notification retry | 2 minutes (`CERTCTL_NOTIFICATION_RETRY_INTERVAL`) | Yes | Re-dispatches `Failed` notifications whose `next_retry_at` has elapsed; exponential backoff (2^n minutes, capped at 1h), 5-attempt budget, terminal `dead` status after exhaustion (I-005) |
+| Short-lived expiry | 30 seconds | Yes | Marks expired short-lived certificates (profile TTL < 1 hour) |
+| Network scanner | 6 hours | Opt-in (`CERTCTL_NETWORK_SCAN_ENABLED`) | Probes TLS endpoints on configured CIDR ranges, stores discovered certs (M21). CIDR size validated at API level — max /20 (4096 IPs) per range. |
+| Certificate digest | 24 hours (`CERTCTL_DIGEST_INTERVAL`) | Opt-in (digest service) | Generates HTML email with certificate stats, expiration timeline, job health, agent count. Does NOT run on startup — waits for first scheduled tick. Falls back to certificate owner emails if no explicit recipients configured. |
+| Endpoint health | 60 seconds (`CERTCTL_HEALTH_CHECK_INTERVAL`) | Opt-in (health check service) | Probes deployed TLS endpoints, drives the healthy/degraded/down/cert_mismatch state machine (M48) |
+| Cloud discovery | 6 hours | Opt-in (at least one cloud source configured) | Walks AWS Secrets Manager / Azure Key Vault / GCP Secret Manager, feeds discovery pipeline (M50) |
 
-Each loop uses `sync/atomic.Bool` idempotency guards to prevent concurrent tick execution — if a loop iteration is still running when the next tick fires, the tick is skipped with a warning log. All loops (including short-lived expiry check) run immediately on startup before entering their ticker interval, ensuring no gap between scheduler start and first execution. The certificate digest loop is the exception — it does NOT run on startup, only on scheduled ticks. Graceful shutdown uses `sync.WaitGroup` with `WaitForCompletion()` to drain all in-flight work before process exit.
+Each loop uses `sync/atomic.Bool` idempotency guards to prevent concurrent tick execution — if a loop iteration is still running when the next tick fires, the tick is skipped with a warning log. Most loops (including short-lived expiry, job retry, job timeout, and notification retry) run immediately on startup before entering their ticker interval, ensuring no gap between scheduler start and first execution. The certificate digest loop is the exception — it does NOT run on startup, only on scheduled ticks. Graceful shutdown uses `sync.WaitGroup` with `WaitForCompletion()` to drain all in-flight work before process exit.
 
 Each operation has a context timeout to prevent indefinite hangs if external services become unresponsive.
 
@@ -648,6 +681,16 @@ Built-in notifiers: **Email** (SMTP), **Webhook** (HTTP POST), **Slack** (incomi
 
 See the [Connector Development Guide](connectors.md) for details on building custom connectors.
 
+### Notification Retry & Dead-Letter Queue
+
+A transient notifier failure (SMTP timeout, 5xx webhook response, Slack rate-limit) must not silently drop a critical alert. Migration `000016_notification_retry` adds three columns to `notification_events` — `retry_count INTEGER NOT NULL DEFAULT 0`, `next_retry_at TIMESTAMPTZ` (nullable — only meaningful while a row is in `failed` state), and `last_error TEXT` (the most recent transient error, preserved for operator triage) — together with a partial index `idx_notification_events_retry_sweep ON notification_events(next_retry_at) WHERE status = 'failed' AND next_retry_at IS NOT NULL` so the retry hot path scales with the retry-eligible slice rather than the full notification history.
+
+The scheduler's notification-retry loop (see the scheduler section above) calls `NotificationService.RetryFailedNotifications(ctx)` every `CERTCTL_NOTIFICATION_RETRY_INTERVAL` (default `2m`). Each tick pulls up to 1000 rows via `notifRepo.ListRetryEligible(ctx, now, maxAttempts, sweepLimit)` — a partial-index-driven query that filters on `status='failed' AND next_retry_at <= now() AND retry_count < 5` — and redispatches them through the same notifier registry used by `ProcessPendingNotifications`. A successful redispatch transitions the row directly to `sent` without incrementing `retry_count`, so the audit trail preserves "delivered on attempt N". A failed redispatch re-arms `next_retry_at` using exponential backoff — `wait = min(2^retry_count minutes, 1h)` — bumps `retry_count`, and stamps `last_error`. When `retry_count >= 4` (the fifth attempt has just failed) the row is promoted to the terminal `dead` status via `notifRepo.MarkAsDead`, which clears `next_retry_at` so the partial retry-sweep index stops matching and the row cannot be re-entered into the retry rotation without operator action.
+
+`NotificationService.RequeueNotification(ctx, id)` is the operator-driven escape hatch from `dead`. It atomically resets `retry_count → 0`, `next_retry_at → NULL`, `last_error → NULL`, and `status → pending`, handing the row back to `ProcessPendingNotifications` on the next 1m tick. This is the correct response to "the notifier outage is resolved, redeliver the queue"; it is not a retry, which is why the retry counter is reset rather than incremented.
+
+The dead-letter depth is surfaced in two places. First, `DashboardSummary.NotificationsDead` is populated by `StatsService.GetDashboardSummary` via `notifRepo.CountByStatus(ctx, "dead")`. The injection uses a `SetNotifRepo` setter pattern (mirroring `CertificateService.SetTargetRepo`) rather than a new positional argument to `NewStatsService`, which keeps all nine existing `NewStatsService` call sites (main.go plus eight digest tests and stats_test.go) signature-stable — when the notification repository has not been wired in, `NotificationsDead` falls through to zero. Second, the `/api/v1/metrics/prometheus` endpoint emits `certctl_notification_dead_total` as a counter (operator alert thresholds per the I-005 spec: `> 0` warning, `> 10` critical) using the same `DashboardSummary` snapshot so the dashboard card and the Prometheus counter cannot skew. The web dashboard exposes a two-tab toolbar on `/notifications` — "All" (the pre-I-005 inbox) and "Dead letter" (threads `?status=dead` into the list query, surfaces `Retry N/5` and the truncated `last_error` with a full-text tooltip per row, and binds a Requeue button to `POST /api/v1/notifications/{id}/requeue`).
+
 ### EST Server (RFC 7030)
 
 The EST (Enrollment over Secure Transport) server provides an industry-standard enrollment interface for devices that need certificates without using the REST API. It runs under `/.well-known/est/` per RFC 7030 and supports four operations: CA certificate distribution (`/cacerts`), initial enrollment (`/simpleenroll`), re-enrollment (`/simplereenroll`), and CSR attributes (`/csrattrs`).
@@ -685,6 +728,8 @@ type ESTService interface {
 
 **Issuer connector extension:** EST required adding `GetCACertPEM(ctx) (string, error)` to the issuer connector interface so the `/cacerts` endpoint can serve the CA chain. The Local CA returns its CA certificate PEM; Vault PKI fetches via `GET /v1/{mount}/ca/pem`; Google CAS fetches via API; AWS ACM PCA retrieves via `GetCertificateAuthorityCertificate`. ACME, step-ca, OpenSSL, DigiCert, and Sectigo connectors return errors (they don't expose a static CA chain — their chains are per-issuance).
 
+**Authentication:** EST endpoints are served unauthenticated at the HTTP layer under `/.well-known/est/*` — no Bearer token required. Per RFC 7030 §3.2.3 EST authentication is deployment-specific, and per §4.1.1 `/cacerts` is explicitly anonymous. certctl enforces authentication via CSR signature verification inside `ESTService.SimpleEnroll`/`SimpleReEnroll` plus profile policy gates (allowed key algorithms, minimum key size, permitted SANs, permitted EKUs, MaxTTL). The HTTP dispatch is implemented in `cmd/server/main.go:buildFinalHandler`, which routes `/.well-known/est/*` through `noAuthHandler` (RequestID + structuredLogger + Recovery only). Operators who need stronger client identification should terminate mTLS at an upstream reverse proxy and pin the CSR's SAN to the client cert subject at the profile level.
+
 **Audit:** Every EST enrollment is recorded in the audit trail with `protocol: "EST"`, the CN, SANs, issuer ID, serial number, and optional profile ID.
 
 ### SCEP Server (RFC 8894)
@@ -711,7 +756,7 @@ Signed certificate returned as PKCS#7 certs-only
 
 **Wire format:** SCEP clients wrap CSRs in PKCS#7 SignedData envelopes. The handler parses the outer ASN.1 ContentInfo → SignedData → EncapsulatedContentInfo to extract the CSR bytes. Fallback paths handle base64-encoded PKCS#7 and raw CSR submissions (for simpler clients). Responses use PKCS#7 certs-only via the shared `internal/pkcs7` package (same as EST). Single certs are returned as raw DER for `GetCACert`, chains as PKCS#7.
 
-**Authentication:** SCEP uses challenge passwords embedded in CSR attributes (OID 1.2.840.113549.1.9.7) rather than TLS client certificates. The server validates the challenge password against `CERTCTL_SCEP_CHALLENGE_PASSWORD`. When no challenge password is configured, any value is accepted.
+**Authentication:** SCEP endpoints at `/scep` and `/scep/*` are served unauthenticated at the HTTP layer — no Bearer token required — per RFC 8894 §3.2, which defines authentication via the `challengePassword` attribute (OID 1.2.840.113549.1.9.7) embedded in the PKCS#10 CSR rather than an HTTP credential. The HTTP dispatch is implemented in `cmd/server/main.go:buildFinalHandler`, which routes `/scep` and `/scep/*` through `noAuthHandler` (RequestID + structuredLogger + Recovery only). The `challengePassword` is mandatory: `preflightSCEPChallengePassword` at startup refuses to boot the control plane when `CERTCTL_SCEP_ENABLED=true` is set without `CERTCTL_SCEP_CHALLENGE_PASSWORD`, closing CWE-306 (missing authentication for a critical function). `SCEPService.PKCSReq` enforces the same invariant defense-in-depth — an empty `s.challengePassword` rejects every enrollment — and the password comparison uses `crypto/subtle.ConstantTimeCompare` to prevent response-time side-channel leakage. The startup log line `SCEP server enabled` emits a `challenge_password_set` boolean for operator visibility.
 
 **Interface:** The `SCEPHandler` defines an `SCEPService` interface (dependency inversion):
 
@@ -768,10 +813,11 @@ The control plane only handles public material: certificates, chains, and CSRs.
 
 ### Authentication
 
-- **API clients → Server**: API key in `Authorization: Bearer` header, or `none` for demo mode
+- **API clients → Server**: API key in `Authorization: Bearer` header, or `none` for demo mode. Applies to every path under `/api/v1/*`.
 - **Agent → Server**: API key registered at agent creation, included in all requests
 - **Server → Issuers**: ACME account key, or connector-specific credentials
 - **Agent → Targets**: API tokens, WinRM credentials (stored locally on agent or proxy agent — never on server). Credential scope is limited to the agent's network zone.
+- **Standards-based enrollment and PKI distribution endpoints**: `/.well-known/est/*` (RFC 7030), `/scep` and `/scep/*` (RFC 8894), and `/.well-known/pki/crl/{issuer_id}` + `/.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 5280 §5 / RFC 6960 / RFC 8615) are served unauthenticated at the HTTP layer. These protocols carry their own authentication semantics — CSR signature + profile policy for EST (§3.2.3 says EST auth is deployment-specific; §4.1.1 makes `/cacerts` explicitly anonymous), `challengePassword` in CSR attributes for SCEP (§3.2), and relying-party accessibility for CRL/OCSP — and cannot present certctl Bearer tokens. The dispatch is implemented in `cmd/server/main.go:buildFinalHandler`, which routes these prefixes through `noAuthHandler` (RequestID + structuredLogger + Recovery only, no auth or rate-limit middleware). CWE-306 is closed for SCEP by `preflightSCEPChallengePassword`, which refuses to start the server when SCEP is enabled without `CERTCTL_SCEP_CHALLENGE_PASSWORD`. The 27-subtest regression harness `cmd/server/finalhandler_test.go` pins this dispatch surface (EST 4-endpoint, SCEP exact + trailing-slash + query-string, PKI CRL+OCSP, health probes, `/api/v1/*` authenticated, `/assets/*` file server, SPA fallback).
 
 ### Audit Trail
 
@@ -850,12 +896,18 @@ The HTTP middleware stack processes requests in the following order (see `cmd/se
 4. **BodyLimit** - request body size cap via `http.MaxBytesReader`
 5. **RateLimiter** - token bucket rate limiting (optional, when enabled)
 6. **CORS** - cross-origin request handling (deny-by-default)
-7. **Auth** - API key or JWT validation
+7. **Auth** - API key validation (or none in development; JWT/OIDC via authenticating gateway, see below — not in-process)
 8. **AuditLog** - records every API call to the audit trail (requires auth context for actor)
 
+### Authenticating-gateway pattern (JWT, OIDC, mTLS)
+
+certctl's in-process authentication surface is intentionally narrow: `api-key` for production deployments and `none` for development. There is no in-process JWT, OIDC, mTLS, or SAML middleware. (`CERTCTL_AUTH_TYPE=jwt` was accepted pre-G-1 but silently routed through the api-key bearer middleware — a security finding masquerading as a config option, removed at the v2.x boundary; see [`upgrade-to-v2-jwt-removal.md`](upgrade-to-v2-jwt-removal.md) if you previously set it.)
+
+For deployments that need JWT/OIDC/mTLS, the standard pattern is to put an authenticating gateway in front of certctl and configure `CERTCTL_AUTH_TYPE=none` on the upstream certctl process. The gateway terminates the federated identity protocol, validates tokens / certificates / SAML assertions, and proxies the authenticated request to certctl as a same-origin call on a private network. This separation gives operators the full breadth of the modern identity ecosystem (oauth2-proxy, Envoy `ext_authz`, Traefik `ForwardAuth`, Pomerium, Authelia, Caddy `forward_auth`, Apache `mod_auth_openidc`, nginx `auth_request`) without certctl itself having to track signing-key rotation, claim mapping, audience validation, and the rest of the JWT/OIDC surface area. Operators wanting per-request actor attribution past the gateway boundary forward the gateway-resolved identity (e.g., `X-Auth-Request-User` from oauth2-proxy) and run a small authorization layer at the gateway that enforces the bearer-key contract certctl actually uses.
+
 ### Concurrency Safety
 
-The background scheduler uses `sync/atomic.Bool` idempotency guards on all 7 loops — if a tick fires while the previous iteration is still running, it skips. A `sync.WaitGroup` tracks all in-flight goroutines. `WaitForCompletion(timeout)` blocks during shutdown until all work finishes or the timeout expires, preventing state corruption from mid-flight database operations during process exit.
+The background scheduler uses `sync/atomic.Bool` idempotency guards on every loop (8 always-on plus up to 4 optional) — if a tick fires while the previous iteration is still running, it skips. A `sync.WaitGroup` tracks all in-flight goroutines. `WaitForCompletion(timeout)` blocks during shutdown until all work finishes or the timeout expires, preventing state corruption from mid-flight database operations during process exit.
 
 ### Logging
 
@@ -889,7 +941,7 @@ Jobs support additional action endpoints: `POST /api/v1/jobs/{id}/cancel`, `POST
 - **Additional filters**: `?agent_id=`, `?profile_id=` (in addition to existing status, environment, owner_id, team_id, issuer_id).
 - **Deployments**: `GET /api/v1/certificates/{id}/deployments` returns deployment targets for a certificate.
 
-Certificate revocation: `POST /api/v1/certificates/{id}/revoke` with optional `{"reason": "keyCompromise"}`. Supports RFC 5280 reason codes (unspecified, keyCompromise, caCompromise, affiliationChanged, superseded, cessationOfOperation, certificateHold, privilegeWithdrawn). Returns the updated certificate status. Best-effort issuer notification — the revocation succeeds even if the issuer connector is unavailable. A JSON-formatted CRL is available at `GET /api/v1/crl`, and a DER-encoded X.509 CRL signed by the issuing CA at `GET /api/v1/crl/{issuer_id}`. An embedded OCSP responder serves signed responses at `GET /api/v1/ocsp/{issuer_id}/{serial}`. Short-lived certificates (profile TTL < 1 hour) are exempt from CRL/OCSP — expiry is sufficient revocation.
+Certificate revocation: `POST /api/v1/certificates/{id}/revoke` with optional `{"reason": "keyCompromise"}`. Supports RFC 5280 reason codes (unspecified, keyCompromise, caCompromise, affiliationChanged, superseded, cessationOfOperation, certificateHold, privilegeWithdrawn). Returns the updated certificate status. Best-effort issuer notification — the revocation succeeds even if the issuer connector is unavailable. The DER-encoded X.509 CRL signed by the issuing CA is served unauthenticated at `GET /.well-known/pki/crl/{issuer_id}` (RFC 5280 §5 + RFC 8615, `Content-Type: application/pkix-crl`). The embedded OCSP responder serves signed responses unauthenticated at `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 6960, `Content-Type: application/ocsp-response`). Both endpoints are accessible to relying parties with no certctl API credentials, as RFC-compliant PKI consumers expect. Short-lived certificates (profile TTL < 1 hour) are exempt from CRL/OCSP — expiry is sufficient revocation.
 
 Certificate export (M27): `GET /api/v1/certificates/{id}/export/pem` returns PEM-encoded certificate and chain, and `POST /api/v1/certificates/{id}/export/pkcs12` returns a PKCS#12 bundle (binary). Private keys are never exported — they remain on agents. All exports are audited with actor, timestamp, and format.
 
@@ -1051,7 +1103,7 @@ flowchart TB
 
 1. **Pluggable sources** — Each cloud provider implements the `DiscoverySource` interface (Name, Type, Discover, ValidateConfig). Three built-in sources: AWS Secrets Manager, Azure Key Vault, GCP Secret Manager
 2. **CloudDiscoveryService orchestrator** — Iterates registered sources, calls `Discover()` on each, feeds reports into `ProcessDiscoveryReport()`. Errors from one source don't prevent other sources from running
-3. **Scheduler integration** — 9th scheduler loop (6h default), runs immediately on startup, `atomic.Bool` idempotency guard
+3. **Scheduler integration** — opt-in cloud discovery scheduler loop (6h default; see `docs/architecture.md` 12-loop topology), runs immediately on startup, `atomic.Bool` idempotency guard
 4. **Sentinel agents** — Each source uses its own sentinel agent ID (`cloud-aws-sm`, `cloud-azure-kv`, `cloud-gcp-sm`) for dedup and triage filtering
 5. **Source path format** — `aws-sm://{region}/{secret}`, `azure-kv://{cert-name}/{version}`, `gcp-sm://{project}/{secret}`
 6. **No new schema** — Reuses existing `discovered_certificates` and `discovery_scans` tables. Sentinel agent IDs leverage existing `(fingerprint_sha256, agent_id, source_path)` dedup constraint
@@ -1073,7 +1125,7 @@ This data flow is pull-based and non-blocking. Agents discover at their own pace
 
 Beyond one-time discovery, certctl continuously monitors TLS endpoints for certificate health using a shared TLS probing package and a state-machine-driven health check service. Endpoints transition between states (Healthy → Degraded → Down) based on consecutive failures, and `cert_mismatch` status alerts when a deployed certificate is unexpectedly replaced.
 
-**Architecture:** Probing is extracted into a shared `internal/tlsprobe/` package used by both the network scanner (M21) and the health monitor. The `HealthCheckService` manages 8 API endpoints for CRUD operations and state transitions. A dedicated 8th scheduler loop runs every 60 seconds (configurable via `CERTCTL_HEALTH_CHECK_INTERVAL`). Individual health check targets have their own check intervals (default 300 seconds) — the scheduler queries only endpoints due for check via `ListDueForCheck()`. Results are stored with historical tracking for 30 days (configurable via `CERTCTL_HEALTH_CHECK_HISTORY_RETENTION`). State transitions trigger notifications (critical for down endpoints, warning for degraded, high for cert_mismatch).
+**Architecture:** Probing is extracted into a shared `internal/tlsprobe/` package used by both the network scanner (M21) and the health monitor. The `HealthCheckService` manages 8 API endpoints for CRUD operations and state transitions. A dedicated opt-in endpoint health scheduler loop runs every 60 seconds (configurable via `CERTCTL_HEALTH_CHECK_INTERVAL`). Individual health check targets have their own check intervals (default 300 seconds) — the scheduler queries only endpoints due for check via `ListDueForCheck()`. Results are stored with historical tracking for 30 days (configurable via `CERTCTL_HEALTH_CHECK_HISTORY_RETENTION`). State transitions trigger notifications (critical for down endpoints, warning for degraded, high for cert_mismatch).
 
 **State Machine:** Healthy → Degraded (configurable threshold, default 2 consecutive failures) → Down (default 5 failures). The `cert_mismatch` status is special — it fires whenever the observed certificate fingerprint differs from the expected (deployed) fingerprint, catching silent rollbacks and unauthorized cert replacements. Recovery from degraded/down transitions back to healthy and resets the failure counter.
 

docs/certctl-for-cert-manager-users.md

@@ -39,7 +39,7 @@ Deploy certctl control plane once (Docker Compose, Kubernetes Helm chart, or sel
 ```bash
 cd /opt/certctl
 docker compose up -d
-# Dashboard & API: http://localhost:8443
+# Dashboard & API: https://localhost:8443 (self-signed cert — pin with --cacert ./deploy/test/certs/ca.crt)
 ```
 
 **Option B: Kubernetes** (recommended for prod)
@@ -59,7 +59,8 @@ chmod +x /usr/local/bin/certctl-agent
 
 # Config
 sudo tee /etc/certctl/agent.env > /dev/null <<EOF
-CERTCTL_SERVER_URL=http://certctl-control-plane:8443
+CERTCTL_SERVER_URL=https://certctl-control-plane:8443
+CERTCTL_SERVER_CA_BUNDLE_PATH=/etc/certctl/tls/ca.crt
 CERTCTL_API_KEY=your-api-key
 CERTCTL_DISCOVERY_DIRS=/etc/nginx/certs,/etc/ssl,/etc/letsencrypt/live
 CERTCTL_KEY_DIR=/var/lib/certctl/keys

docs/compliance-nist.md

@@ -210,15 +210,17 @@ NIST SP 800-57 Part 1 Section 6.2 addresses secure key distribution to minimize
   - Proxy agent executes deployment via appliance API
 
 **Revocation Distribution**
-- Certificate Revocation List (CRL) via `GET /api/v1/crl/{issuer_id}`
-  - Returns DER-encoded X.509 CRL signed by issuing CA
+- Certificate Revocation List (CRL) via `GET /.well-known/pki/crl/{issuer_id}` (RFC 5280 §5, RFC 8615)
+  - Returns DER-encoded X.509 CRL signed by issuing CA (`Content-Type: application/pkix-crl`)
   - 24-hour validity period
   - Includes all revoked serials, reasons, and revocation timestamps
+  - Served unauthenticated so relying parties without certctl API credentials can fetch it
   - Subject to URL caching; OCSP preferred for real-time revocation
-- OCSP via `GET /api/v1/ocsp/{issuer_id}/{serial}`
-  - Returns DER-encoded OCSP response (OCSPResponse ASN.1 structure)
+- OCSP via `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 6960)
+  - Returns DER-encoded OCSP response (OCSPResponse ASN.1 structure, `Content-Type: application/ocsp-response`)
   - Signed by issuing CA (or delegated OCSP signing cert)
   - Responds with good/revoked/unknown status
+  - Served unauthenticated — the RFC 6960 relying-party model does not assume API credentials
   - Real-time, more bandwidth-efficient than CRL polling
 
 ## Revocation and Compromise (NIST SP 800-57 Part 3)

docs/compliance-pci-dss.md

@@ -92,10 +92,10 @@ Your QSA will request evidence that your certificate and key management systems
 
 - **Certificate Status Tracking** — Four statuses: Active (deployed, not yet expired), Expiring (within threshold, awaiting renewal), Expired (past not-after date), Revoked (revoked via RFC 5280 revocation API). Dashboard charts show status distribution.
 
-- **Revocation Infrastructure** (M15a, M15b):
+- **Revocation Infrastructure** (M15a, M15b, M-006):
   - Revocation API: `POST /api/v1/certificates/{id}/revoke` with RFC 5280 reason codes
-  - CRL endpoint: `GET /api/v1/crl` (JSON format) or `GET /api/v1/crl/{issuer_id}` (DER X.509 CRL, 24h validity, signed by issuing CA)
-  - OCSP responder: `GET /api/v1/ocsp/{issuer_id}/{serial}` (returns DER-encoded OCSP response: good/revoked/unknown)
+  - CRL endpoint: `GET /.well-known/pki/crl/{issuer_id}` — DER X.509 CRL, 24h validity, signed by issuing CA, served unauthenticated (RFC 5280 §5, RFC 8615, `Content-Type: application/pkix-crl`)
+  - OCSP responder: `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` — DER-encoded OCSP response (good/revoked/unknown), served unauthenticated (RFC 6960, `Content-Type: application/ocsp-response`)
   - Bulk revocation (V2.2): `POST /api/v1/certificates/bulk-revoke` with filter criteria (profile, owner, agent, issuer) for fleet-wide incident response
   - Short-lived cert exemption: certs with TTL < 1 hour skip CRL/OCSP (expiry is sufficient revocation)
 
@@ -109,7 +109,7 @@ Your QSA will request evidence that your certificate and key management systems
 - Discovered certificate report: `GET /api/v1/discovered-certificates` JSON export showing all certs on systems, fingerprints, and status.
 - Managed certificate inventory: `GET /api/v1/certificates` with filters (`?status=Expiring` for upcoming renewals).
 - Expiration alert configuration: policy JSON showing `alert_thresholds_days` for each environment.
-- CRL/OCSP availability proof: HTTP GET requests to `/api/v1/crl` and `/api/v1/ocsp/{issuer}/{serial}` with signed responses.
+- CRL/OCSP availability proof: unauthenticated HTTP GET requests to `/.well-known/pki/crl/{issuer_id}` (DER, `application/pkix-crl`) and `/.well-known/pki/ocsp/{issuer_id}/{serial}` (DER, `application/ocsp-response`) with signed responses.
 - Audit trail for certificate creation/renewal/revocation: `GET /api/v1/audit?type=certificate_issued,certificate_renewed,certificate_revoked`.
 - Dashboard charts showing expiration timeline, renewal success trends, status distribution.
 
@@ -328,9 +328,10 @@ This requirement covers key generation, storage, rotation, and destruction. Cert
   - Issuer notified (best-effort; ACME lacks standard revocation, Local CA skips issuer step).
   - Revocation notifications sent to owner via email/webhook/Slack/Teams/PagerDuty.
 
-- **CRL and OCSP Publication** (M15b) — Revoked certificates published in:
-  - CRL: `GET /api/v1/crl` (JSON format) or `GET /api/v1/crl/{issuer_id}` (DER X.509, signed by CA, 24h validity)
-  - OCSP: `GET /api/v1/ocsp/{issuer_id}/{serial}` (returns revoked status for clients validating certificate chain)
+- **CRL and OCSP Publication** (M15b, M-006) — Revoked certificates published in:
+  - CRL: `GET /.well-known/pki/crl/{issuer_id}` (DER X.509 signed by CA, 24h validity, RFC 5280 §5 + RFC 8615, `Content-Type: application/pkix-crl`)
+  - OCSP: `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (returns revoked status for clients validating certificate chain, RFC 6960, `Content-Type: application/ocsp-response`)
+  - Both endpoints are served unauthenticated so relying parties (browsers, TLS appliances) without certctl API keys can verify revocation — this is the RFC-compliant PKI model.
   - Clients checking certificate status via OCSP or CRL see revoked status within 24 hours.
 
 - **Bulk Revocation for Incident Response** (V2.2) — `POST /api/v1/certificates/bulk-revoke` with filter criteria (profile, owner, agent, issuer) revokes all matching certificates in a single operation. PCI-DSS Req 4 requires rapid response to data transmission security incidents — bulk revocation enables operators to revoke an entire certificate set (e.g., all certs used by a compromised team or endpoint) in minutes rather than hours.
@@ -342,8 +343,8 @@ This requirement covers key generation, storage, rotation, and destruction. Cert
 
 **Evidence You Can Provide**:
 - Revocation requests: `GET /api/v1/audit?type=certificate_revoked` with RFC 5280 reason codes.
-- CRL publication: HTTP GET `/api/v1/crl` and parse JSON to show revoked serial numbers and timestamps.
-- OCSP responder validation: Query `GET /api/v1/ocsp/{issuer}/{serial}` for a known-revoked cert; response includes `revoked` status.
+- CRL publication: HTTP GET `/.well-known/pki/crl/{issuer_id}` (unauthenticated) returns a DER X.509 CRL — parse with `openssl crl -inform der -noout -text` to show revoked serial numbers, reasons, and timestamps.
+- OCSP responder validation: Query `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (unauthenticated) for a known-revoked cert; response includes `revoked` status and can be parsed with `openssl ocsp` tooling.
 - Audit trail: Certificate status transitions (Active → Revoked) recorded in `audit_events`.
 
 **Operator Responsibility**:
@@ -386,12 +387,12 @@ This requirement covers key generation, storage, rotation, and destruction. Cert
   - API key transmitted in Authorization header (not URL parameter, not cookie).
   - Browser to server: TLS.
   - Agent to server: TLS.
-  - No credential logging (API key hash only, never plaintext).
+  - No credential logging (audit records the per-key actor `Name`, never the Bearer token; logs redact the `Authorization` header).
 
 **Evidence You Can Provide**:
 - API configuration: `CERTCTL_AUTH_TYPE=api-key` in deployment manifest.
-- Database schema: `api_keys` table showing SHA-256 hash column, not plaintext.
-- API audit log: `GET /api/v1/audit?action=api_call` showing Bearer token validation (no plaintext keys logged).
+- Key inventory: `CERTCTL_API_KEYS_NAMED` env var (format `name:key:admin,...`) — seeds the in-memory `NamedAPIKey{Name, Key, Admin}` struct at `internal/api/middleware/middleware.go:29`. Keys are constant-time-compared (`subtle.ConstantTimeCompare`) against the Bearer token. No database table stores them; protect the env var contents at rest via a secrets manager (Vault / AWS Secrets Manager / Kubernetes Secrets / Docker Secrets).
+- API audit log: `GET /api/v1/audit?action=api_call` showing per-key actor names (`Name` field of matched `NamedAPIKey`) on every call, with zero plaintext or hashed key material recorded.
 - TLS certificate on control plane: `openssl s_client -connect {server}:8443` showing valid certificate, TLS 1.2+, strong cipher.
 - GUI login flow: browser network tab showing Authorization header (token value redacted in compliance report).
 
@@ -561,6 +562,7 @@ This requirement covers key generation, storage, rotation, and destruction. Cert
 - **Alert Notifications** (M3, M16a) — Configurable escalation:
   - Email alerts: certificate approaching expiration, renewal failure, revocation notification.
   - Webhook: custom HTTP POST to your monitoring system (Slack, Teams, PagerDuty, OpsGenie, custom webhook).
+  - **Retry & Dead-Letter Queue** (I-005) — Transient notifier failures (SMTP timeout, webhook 5xx) are retried with exponential backoff (`2^n` minutes capped at 1h, 5-attempt budget) before landing in the terminal `dead` status. Operators monitor DLQ depth via the `certctl_notification_dead_total` Prometheus counter and requeue via the Notifications page Dead letter tab once the underlying outage is resolved. Closes the pre-I-005 silent-drop gap where a single 5xx could lose a compliance-relevant alert without evidence.
   - Deduplication: one alert per threshold/certificate per day (avoid alert fatigue).
 
 - **Audit Trail Filtering and Export** (M13) — Compliance reporting:
@@ -721,12 +723,12 @@ This requirement covers key generation, storage, rotation, and destruction. Cert
 | PCI-DSS Requirement | certctl Feature | API/UI Evidence | Database/Config | Audit Trail | Status |
 |---|---|---|---|---|---|
 | **4.2.1** Strong Crypto | TLS cert issuance, ACME/step-ca/Local CA, RSA 2048+/ECDSA P-256 | `GET /api/v1/certificates` (key_type, key_size) | Certificate profiles | `GET /api/v1/audit?type=certificate_issued` | Available |
-| **4.2.2** Cert Inventory & Validation | Managed cert CRUD, discovery (M18b), expiration alerting, CRL/OCSP | `GET /api/v1/certificates`, `GET /api/v1/discovered-certificates`, `GET /api/v1/crl`, `GET /api/v1/ocsp/{issuer}/{serial}` | `managed_certificates`, `discovered_certificates` tables | `GET /api/v1/audit?type=certificate_*` | Available |
+| **4.2.2** Cert Inventory & Validation | Managed cert CRUD, discovery (M18b), expiration alerting, CRL/OCSP | `GET /api/v1/certificates`, `GET /api/v1/discovered-certificates`, `GET /.well-known/pki/crl/{issuer_id}`, `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (both unauthenticated, RFC 5280 / RFC 6960) | `managed_certificates`, `discovered_certificates` tables | `GET /api/v1/audit?type=certificate_*` | Available |
 | **3.6** Key Documentation | Profiles, owner/team tracking, issuer config, audit trail | `GET /api/v1/profiles`, `GET /api/v1/issuers`, certificate detail with owner/team | Profiles, certificate owner/team fields, issuer config | `GET /api/v1/audit?resource_type=certificate` | Available |
 | **3.7.1** Key Generation | Agent-side ECDSA P-256, server keygen (demo only) | Agent logs, renewal job detail, CSR audit | `CERTCTL_KEYGEN_MODE=agent` (config), job_type=AwaitingCSR | `GET /api/v1/audit?type=certificate_issued` with CSR hash | Available |
 | **3.7.2** Key Storage | Agent `/var/lib/certctl/keys` (0600), env var secrets, .env excluded | Deployment manifest (env var refs), agent key dir listing | `.env` file (git-ignored), `CERTCTL_KEY_DIR`, `CERTCTL_CA_KEY_PATH` | No API audit (keys off-platform) | Available |
 | **3.7.3** Key Rotation | Auto renewal, expiration thresholds, renewal jobs | Dashboard renewal trends, `GET /api/v1/jobs?type=Renewal`, certificate versions | Renewal policies, certificate version history | `GET /api/v1/audit?type=certificate_renewed` | Available |
-| **3.7.4** Key Destruction | Revocation API (RFC 5280), CRL/OCSP, private key cleanup | `POST /api/v1/certificates/{id}/revoke`, `GET /api/v1/crl`, OCSP endpoint | `certificate_revocations` table, CRL publication | `GET /api/v1/audit?type=certificate_revoked` | Available |
+| **3.7.4** Key Destruction | Revocation API (RFC 5280), CRL/OCSP, private key cleanup | `POST /api/v1/certificates/{id}/revoke`, unauthenticated `GET /.well-known/pki/crl/{issuer_id}` and `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` | `certificate_revocations` table, CRL publication | `GET /api/v1/audit?type=certificate_revoked` | Available |
 | **8.3** Strong Authentication | API key (SHA-256 hash, TLS), GUI login, 401 redirect | GUI login screenshot, API key auth header, TLS cert | API key hash in database | `GET /api/v1/audit` showing API calls | Available |
 | **8.6** Acct Management | Credentials out of source, .env excluded, env var config | Code review (no hardcoded secrets), `.gitignore` check | Deployment manifests showing env var refs only | No account lifecycle audit (outside scope) | Available in part |
 | **10.2** Audit Logging | API audit middleware (M19), certificate lifecycle events | `GET /api/v1/audit` with filter/pagination | `audit_events` table (every API call) | Real-time via API | Available |

docs/compliance-soc2.md

@@ -44,7 +44,8 @@ Each section includes:
 
 **certctl Implementation** (V2 — Community Edition):
 
-- **API Key Authentication** — All API calls require a Bearer token (hashed with SHA-256, stored securely, validated with constant-time comparison) or are rejected with 401 Unauthorized. Environment: `CERTCTL_AUTH_TYPE` (default `api-key`; `none` requires explicit opt-in with log warning)
+- **API Key Authentication** — All `/api/v1/*` calls require a Bearer token (hashed with SHA-256, stored securely, validated with constant-time comparison) or are rejected with 401 Unauthorized. Environment: `CERTCTL_AUTH_TYPE` (default `api-key`; `none` requires explicit opt-in with log warning)
+- **Standards-based enrollment and PKI distribution endpoints** — EST (`/.well-known/est/*`, RFC 7030), SCEP (`/scep`, `/scep/*`, RFC 8894), and CRL/OCSP (`/.well-known/pki/crl/{issuer_id}`, `/.well-known/pki/ocsp/{issuer_id}/{serial}`, RFC 5280 §5 / RFC 6960 / RFC 8615) are served unauthenticated at the HTTP layer because these protocols cannot present certctl Bearer tokens. Authentication is enforced in-protocol: EST relies on CSR signature verification plus profile policy (RFC 7030 §3.2.3 says EST auth is deployment-specific; §4.1.1 makes `/cacerts` explicitly anonymous); SCEP requires a shared `challengePassword` in the PKCS#10 CSR attributes (OID 1.2.840.113549.1.9.7, RFC 8894 §3.2), validated with `crypto/subtle.ConstantTimeCompare`; CRL and OCSP are intentionally anonymous for relying-party accessibility. CWE-306 (missing authentication for a critical function) is closed for SCEP by `preflightSCEPChallengePassword` in `cmd/server/main.go`, which refuses to start the control plane when `CERTCTL_SCEP_ENABLED=true` is set without `CERTCTL_SCEP_CHALLENGE_PASSWORD`. The HTTP dispatch is implemented in `cmd/server/main.go:buildFinalHandler`, which routes these prefixes through `noAuthHandler` (RequestID + structuredLogger + Recovery only, no auth or rate-limit middleware) and is pinned by the 27-subtest regression harness at `cmd/server/finalhandler_test.go`.
 - **GUI Authentication** — Web dashboard includes login screen requiring API key entry. Failed auth redirects to login on 401. Auth context persists across page navigation. Logout clears session.
 - **Configurable CORS** — API restricts cross-origin requests via `CERTCTL_CORS_ORIGINS` allowlist or wildcard. Preflight caching prevents chatty browser auth flows.
 - **Token Bucket Rate Limiting** — Per-IP rate limiting (configurable via `CERTCTL_RATE_LIMIT_RPS` / `CERTCTL_RATE_LIMIT_BURST`) returns 429 Too Many Requests with Retry-After header. Prevents credential stuffing and brute-force attacks.
@@ -58,6 +59,11 @@ Each section includes:
 - Auth info endpoint: `GET /api/v1/auth/info` (returns current auth mode, served without auth so GUI detects mode)
 - Rate limiting middleware: `internal/api/middleware/rate_limit.go`
 - CORS configuration: `cmd/server/main.go`, search for `CERTCTL_CORS_ORIGINS`
+- Final handler dispatch (authenticated vs. unauthenticated routing): `cmd/server/main.go:buildFinalHandler`
+- SCEP preflight gate (CWE-306 closure): `cmd/server/main.go:preflightSCEPChallengePassword`
+- SCEP service-layer defense-in-depth (rejects enrollment on empty challenge password, `crypto/subtle.ConstantTimeCompare`): `internal/service/scep.go`
+- Final handler dispatch regression harness (27 subtests): `cmd/server/finalhandler_test.go`
+- OpenAPI spec `security: []` overrides on unauthenticated paths: `api/openapi.yaml` (EST `/cacerts`, `/simpleenroll`, `/simplereenroll`, `/csrattrs`; SCEP `/scep` GET+POST; PKI `/crl/{issuer_id}`, `/ocsp/{issuer_id}/{serial}`)
 
 **V3 Enhancement**:
 
@@ -110,7 +116,7 @@ Each section includes:
 
 **certctl Implementation** (V2):
 
-- **API Key Policy** — All API access requires an API key or explicit opt-out. Opt-out (`CERTCTL_AUTH_TYPE=none`) logs a warning: "WARNING: Auth disabled (CERTCTL_AUTH_TYPE=none) — this is insecure and only for development". Configuration choice is logged at startup.
+- **API Key Policy** — All `/api/v1/*` access requires an API key or explicit opt-out. Opt-out (`CERTCTL_AUTH_TYPE=none`) logs a warning: "WARNING: Auth disabled (CERTCTL_AUTH_TYPE=none) — this is insecure and only for development". Configuration choice is logged at startup. The standards-based enrollment and PKI distribution endpoints (EST, SCEP, CRL, OCSP) are served unauthenticated at the HTTP layer per their respective RFCs; see CC6.1 for the full authentication contract and CWE-306 closure via `preflightSCEPChallengePassword`.
 - **Agent Authentication** — Agents authenticate to the server via API keys (same mechanism as users). Agent credentials are separate from user API keys.
 - **Private Key Policy** — Agent-side key generation is the default (`CERTCTL_KEYGEN_MODE=agent`). Server-side keygen (`CERTCTL_KEYGEN_MODE=server`) requires explicit configuration and logs a warning: "server-side key generation enabled (CERTCTL_KEYGEN_MODE=server) — private keys touch control plane, demo only".
 - **Password Policy** — Not applicable; certctl uses API keys exclusively. Password management is delegated to your organization's IAM system if you integrate OIDC/SSO (V3).
@@ -183,15 +189,20 @@ Each section includes:
 
 - **Health Endpoint** — `GET /health` returns 200 OK with service status. Consumed by Docker health checks and Kubernetes probes.
 - **Readiness Endpoint** — `GET /ready` returns 200 OK when the database is connected and migrations are applied.
-- **Background Scheduler Monitoring** — 7 background loops run on a fixed schedule:
-  - Renewal loop: every 1 hour, scans for certificates approaching renewal threshold
-  - Job processor loop: every 30 seconds, picks up pending/waiting jobs and advances their state
-  - Health check loop: every 2 minutes, pings agents to detect downtime
-  - Notification dispatcher loop: every 1 minute, sends queued alerts
-  - Short-lived cert expiry loop: every 30 seconds, marks expired short-lived credentials
-  - Network scanner loop: every 6 hours, scans enabled TLS endpoints for certificate discovery
-  - Digest emailer loop: every 24 hours, sends scheduled certificate digest email to configured recipients
-  Each loop includes error handling and logs failures via structured slog.
+- **Background Scheduler Monitoring** — 12 background loops (8 always-on + 4 opt-in) run on a fixed schedule. Authoritative topology in `docs/architecture.md`:
+  - Renewal loop (always-on, 1 hour): scans for certificates approaching renewal threshold
+  - Job processor loop (always-on, 30 seconds): picks up pending/waiting jobs and advances their state
+  - Job retry loop (always-on, 5 minutes, `CERTCTL_SCHEDULER_RETRY_INTERVAL`): retries Failed jobs (I-001)
+  - Job timeout reaper loop (always-on, 10 minutes, `CERTCTL_JOB_TIMEOUT_INTERVAL`): fails AwaitingCSR/AwaitingApproval jobs past timeout (I-003)
+  - Agent health check loop (always-on, 2 minutes): pings agents to detect downtime
+  - Notification dispatcher loop (always-on, 1 minute): sends queued alerts
+  - Notification retry loop (always-on, 2 minutes, `CERTCTL_NOTIFICATION_RETRY_INTERVAL`): exponential backoff retry for failed notifications; promote to dead-letter after 5 attempts (I-005)
+  - Short-lived cert expiry loop (always-on, 30 seconds): marks expired short-lived credentials
+  - Network scanner loop (opt-in, 6 hours, `CERTCTL_NETWORK_SCAN_ENABLED`): scans enabled TLS endpoints for certificate discovery
+  - Digest emailer loop (opt-in, 24 hours, `CERTCTL_DIGEST_INTERVAL`): sends scheduled certificate digest email to configured recipients
+  - Endpoint health loop (opt-in, 60 seconds, `CERTCTL_HEALTH_CHECK_INTERVAL`): continuous TLS health probes (M48)
+  - Cloud discovery loop (opt-in, 6 hours, `CERTCTL_CLOUD_DISCOVERY_INTERVAL`): cloud secret manager certificate discovery (M50)
+  Each loop includes `atomic.Bool` idempotency guards, error handling, and structured slog failure logs.
 - **Metrics Endpoints** — Two formats for monitoring integration:
   - `GET /api/v1/metrics` — JSON object with gauges, counters, and uptime for custom dashboards
   - `GET /api/v1/metrics/prometheus` — Prometheus exposition format (`text/plain; version=0.0.4`) for native scraping by Prometheus, Grafana Agent, Datadog, and other OpenMetrics-compatible collectors
@@ -282,8 +293,8 @@ Each section includes:
   - `certificateHold` — temporary revocation (can be "unhold" by reissue)
   - `privilegeWithdrawn` — access rights revoked
   Revocation is **immediate** (no approval workflow). The certificate is marked `Revoked` in inventory, an audit event is logged, and optional issuer notification is best-effort. All revoked certs are excluded from active deployments.
-- **CRL Endpoint** — `GET /api/v1/crl` returns a JSON-formatted Certificate Revocation List (serial, reason, timestamp for each revoked cert). `GET /api/v1/crl/{issuer_id}` returns a DER-encoded X.509 CRL signed by the issuing CA (useful for legacy clients that don't support OCSP).
-- **OCSP Responder** — `GET /api/v1/ocsp/{issuer_id}/{serial}` returns a signed OCSP response indicating whether a cert is good, revoked, or unknown. Clients (browsers, TLS libraries) query this endpoint to verify cert validity in real-time.
+- **CRL Endpoint** — `GET /.well-known/pki/crl/{issuer_id}` returns a DER-encoded X.509 CRL signed by the issuing CA (RFC 5280 §5, RFC 8615, `Content-Type: application/pkix-crl`), served unauthenticated for relying parties that don't hold certctl API credentials.
+- **OCSP Responder** — `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` returns a signed OCSP response indicating whether a cert is good, revoked, or unknown (RFC 6960, `Content-Type: application/ocsp-response`). Also unauthenticated. Clients (browsers, TLS libraries) query this endpoint to verify cert validity in real-time.
 - **Revocation Notifications** — When a cert is revoked, notifications are sent to:
   - Certificate owner (email)
   - Configured webhooks (if you have a SIEM that subscribes)
@@ -453,15 +464,15 @@ Each section includes:
 | | Metrics JSON Endpoint | `GET /api/v1/metrics` (gauges, counters, uptime) | ✅ | ✅ | Set thresholds, configure alerting |
 | | Stats API (time-series) | `GET /api/v1/stats/*` (summary, status, expiration, jobs, issuance) | ✅ | ✅ | Integrate into dashboards, SLO tracking |
 | | Structured Logging | `slog` middleware with request IDs | ✅ | ✅ | Aggregate logs to SIEM, define retention policy |
-| | Background Scheduler | 7 loops (renewal 1h, jobs 30s, health 2m, notifications 1m, short-lived 30s, network scan 6h, digest 24h) | ✅ | ✅ | Alert on scheduler loop failures |
+| | Background Scheduler | 12 loops (8 always-on: renewal 1h, jobs 30s, job retry 5m I-001, job timeout 10m I-003, health 2m, notifications 1m, notif retry 2m I-005, short-lived 30s; 4 opt-in: network scan 6h, digest 24h, endpoint health 60s M48, cloud discovery 6h M50) | ✅ | ✅ | Alert on scheduler loop failures |
 | **CC7.2** Anomaly Detection | Immutable API Audit Trail | `internal/api/middleware/audit.go`, `GET /api/v1/audit` | ✅ | Enhanced (SIEM export) | Integrate into SIEM, search for anomalies, archive long-term |
 | | Expiration Threshold Alerting | Configurable per-policy (default 30/14/7/0 days) | ✅ | ✅ | Configure thresholds, integrate notifications |
 | | Status Auto-Transitions | Active → Expiring (30d) → Expired (0d) | ✅ | ✅ | Monitor status changes in audit trail |
 | | Notification Routing | Email, Slack, Teams, PagerDuty, OpsGenie | ✅ | ✅ | Configure notifiers, on-call integration |
 | | Deployment Rollback | Redeploy previous cert version via GUI | ✅ | ✅ | Audit rollback decisions |
 | **CC7.3** Incident Response | Revocation API (RFC 5280 reasons) | `POST /api/v1/certificates/{id}/revoke` | ✅ | Enhanced (bulk revocation) | Establish incident response policy |
-| | CRL Endpoint (JSON + DER) | `GET /api/v1/crl`, `GET /api/v1/crl/{issuer_id}` | ✅ | ✅ | Ensure CRL/OCSP accessible to all clients |
-| | OCSP Responder | `GET /api/v1/ocsp/{issuer_id}/{serial}` | ✅ | ✅ | Test revocation in staging |
+| | CRL Endpoint (DER, RFC 5280 §5) | `GET /.well-known/pki/crl/{issuer_id}` (unauthenticated, `application/pkix-crl`) | ✅ | ✅ | Ensure CRL/OCSP accessible to all clients without API keys |
+| | OCSP Responder (RFC 6960) | `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (unauthenticated, `application/ocsp-response`) | ✅ | ✅ | Test revocation in staging |
 | | Revocation Notifications | Email, webhook, Slack/Teams on revocation | ✅ | ✅ | Integrate into on-call, document justification separately |
 | | Short-Lived Cert Exemption | TTL < 1h skip CRL/OCSP | ✅ | ✅ | Configure profiles appropriately |
 | **CC7.4** Risk Mitigation | Renewal Job Tracking | Job state machine (Pending → Running → Completed/Failed) | ✅ | ✅ | Monitor renewal success rate |

docs/concepts.md

@@ -123,6 +123,8 @@ At no point does the private key leave the agent. This is a fundamental security
 
 Agents also report **metadata** about themselves — their operating system, CPU architecture, IP address, hostname, and version — with every heartbeat. This gives ops teams fleet-wide visibility (e.g., "how many agents are running on ARM?", "which agents are still on v1.0.0?") and powers **agent groups** — dynamic device grouping where policies can be scoped to specific agent criteria like OS type, architecture, or network subnet.
 
+**Retiring an agent.** When you decommission a server, the certctl record for its agent needs to be retired, not deleted. certctl uses a **soft-delete** model: `DELETE /api/v1/agents/{id}` stamps the row with a retired-at timestamp and a reason, instead of removing it. This is deliberate — an audit trail of "who owned this certificate, on which host, for which team" stays intact forever, and the downstream deployment_targets, certificates, and jobs keep valid foreign keys. Retired agents are filtered out of default list views and the dashboard's agent counter, but remain visible through a separate retired-agents view for compliance reconciliation. If the agent still has active deployment targets, deployed certificates, or pending jobs, retirement is blocked by default so you don't silently orphan those rows; the API responds with the exact counts so you can retire or reassign each dependency explicitly. A force-retire escape hatch (`?force=true&reason=...`) is available for true decommission scenarios — it transactionally retires the downstream targets, cancels pending jobs, and records the cascade in the audit trail with the reason you provided. Four internal sentinel agents that back the network scanner and the cloud secret-manager discovery sources cannot be retired at all, even with force, because retiring them would orphan their subsystems. Once retired, an agent that still attempts to heartbeat receives `410 Gone` — the agent process reads that as "you've been retired, shut down" and exits cleanly.
+
 ### Deployment Targets
 
 Targets are the systems where certificates actually get installed — NGINX web servers, Apache httpd servers, HAProxy load balancers, Traefik reverse proxies, Caddy servers, Envoy gateways, Postfix/Dovecot mail servers, Microsoft IIS servers, and network appliances. Each target type has a **connector** that knows how to deploy certificates to that specific system (e.g., writing files and reloading NGINX or Apache config, building a combined PEM for HAProxy).
@@ -216,9 +218,9 @@ certctl implements revocation using three complementary mechanisms:
 
 **Bulk Revocation** (Fleet-Level Incident Response): For large-scale incidents like CA compromise or team infrastructure decommissioning, `POST /api/v1/certificates/bulk-revoke` revokes all certificates matching filter criteria in a single operation. Filter by profile, owner, team, agent group, or issuer to target the affected certificate set. This is essential for incident response — instead of revoking certificates one-by-one, operators can revoke an entire fleet in minutes. Bulk revocation creates individual revocation jobs that reuse the existing revocation pipeline, ensuring every certificate is audited and notifications are sent.
 
-**Certificate Revocation List (CRL)**: certctl serves both a JSON-formatted CRL at `GET /api/v1/crl` and DER-encoded X.509 CRLs per issuer at `GET /api/v1/crl/{issuer_id}`. The DER CRL is signed by the issuing CA's key and has 24-hour validity — clients can download it periodically to check revocation status offline.
+**Certificate Revocation List (CRL)**: certctl serves DER-encoded X.509 CRLs per issuer at `GET /.well-known/pki/crl/{issuer_id}` (RFC 5280 §5 wire format, RFC 8615 well-known namespace). The endpoint is unauthenticated so any relying party — browser, TLS client, hardware appliance — can fetch it without a certctl API key. The CRL is signed by the issuing CA's key and has 24-hour validity; clients can download it periodically to check revocation status offline. The response carries `Content-Type: application/pkix-crl`.
 
-**OCSP Responder**: For real-time revocation checking, certctl includes an embedded OCSP responder at `GET /api/v1/ocsp/{issuer_id}/{serial}`. It returns signed OCSP responses (good, revoked, or unknown) so clients can verify certificate status without downloading the full CRL.
+**OCSP Responder**: For real-time revocation checking, certctl includes an embedded OCSP responder at `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 6960). Like the CRL endpoint, it is unauthenticated and returns signed OCSP responses (good, revoked, or unknown) with `Content-Type: application/ocsp-response`, so clients can verify certificate status without downloading the full CRL.
 
 Short-lived certificates (those assigned to profiles with TTL under 1 hour) are exempt from CRL and OCSP — their rapid expiry is considered sufficient revocation. This is a deliberate design choice to reduce infrastructure overhead for ephemeral machine-to-machine credentials.
 

docs/connectors.md

@@ -155,7 +155,7 @@ The Local CA issuer signs certificates using Go's `crypto/x509` library. It supp
 
 **Sub-CA mode:** Loads a CA certificate and private key from disk (`CERTCTL_CA_CERT_PATH` + `CERTCTL_CA_KEY_PATH`). The CA cert is signed by an upstream CA (e.g., ADCS), so all issued certificates chain to the enterprise root trust hierarchy. Clients that already trust the enterprise root automatically trust certctl-issued certs. Supports RSA, ECDSA, and PKCS#8 key formats. If the paths are not set, falls back to self-signed mode. The loaded certificate must have `IsCA=true` and `KeyUsageCertSign`.
 
-**CRL and OCSP support (M15b):** The Local CA supports DER-encoded X.509 CRL generation via `GET /api/v1/crl/{issuer_id}` with 24-hour validity. An embedded OCSP responder at `GET /api/v1/ocsp/{issuer_id}/{serial}` returns signed OCSP responses for issued certificates (good/revoked/unknown status). Certificates with profile TTL < 1 hour automatically skip CRL/OCSP — expiry is treated as sufficient revocation for short-lived credentials.
+**CRL and OCSP support (M15b):** The Local CA supports DER-encoded X.509 CRL generation served unauthenticated at `GET /.well-known/pki/crl/{issuer_id}` (RFC 5280 §5, RFC 8615, `Content-Type: application/pkix-crl`) with 24-hour validity. An embedded OCSP responder at `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 6960, `Content-Type: application/ocsp-response`) returns signed OCSP responses for issued certificates (good/revoked/unknown status). Both endpoints are reachable by relying parties with no certctl API credentials, which is how standard TLS clients, browsers, and hardware appliances consume these resources. Certificates with profile TTL < 1 hour automatically skip CRL/OCSP — expiry is treated as sufficient revocation for short-lived credentials.
 
 **Extended Key Usage (EKU) support (M27):** The Local CA respects EKU constraints from certificate profiles and adjusts key usage flags accordingly. For S/MIME certificates (emailProtection EKU), it uses `DigitalSignature | ContentCommitment` instead of the TLS default. For TLS certificates (serverAuth/clientAuth EKU), it uses `DigitalSignature | KeyEncipherment`. This enables support for multiple certificate types — TLS, S/MIME, code signing, timestamping — from a single CA.
 
@@ -287,7 +287,7 @@ Environment variables:
 
 The connector is registered in the issuer registry under `iss-stepca`. step-ca also works with the existing ACME connector (point `iss-acme-*` at step-ca's ACME directory URL for ACME-based issuance).
 
-**Note:** step-ca-issued certificates rely on step-ca's own CRL/OCSP infrastructure. certctl's local CRL/OCSP endpoints (`GET /api/v1/crl/{issuer_id}` and `GET /api/v1/ocsp/{issuer_id}/{serial}`) are populated from step-ca's revocation data if available, but clients should validate against step-ca's endpoints for the authoritative status.
+**Note:** step-ca-issued certificates rely on step-ca's own CRL/OCSP infrastructure. certctl's local CRL/OCSP endpoints (`GET /.well-known/pki/crl/{issuer_id}` and `GET /.well-known/pki/ocsp/{issuer_id}/{serial}`, served unauthenticated per RFC 5280 §5 / RFC 6960 / RFC 8615) are populated from step-ca's revocation data if available, but clients should validate against step-ca's endpoints for the authoritative status.
 
 **MaxTTL enforcement (M11c):** When a certificate profile defines a maximum TTL, the step-ca connector caps the `NotAfter` field to ensure the issued certificate does not exceed the profile limit, regardless of the step-ca provisioner's own maximum.
 
@@ -1126,7 +1126,7 @@ The digest HTML template includes:
 - Expiring certificates table (color-coded by urgency: 7d, 14d, 30d)
 - Auto-refresh and responsive email layout
 
-**Scheduler Integration:** The 7th scheduler loop runs on configurable interval (default 24 hours). It does NOT run on startup — waits for first scheduled tick. Operation timeout is 5 minutes. Each loop execution is guarded by `sync/atomic.Bool` idempotency.
+**Scheduler Integration:** The opt-in digest scheduler loop runs on configurable interval (default 24 hours). It does NOT run on startup — waits for first scheduled tick. Operation timeout is 5 minutes. Each loop execution is guarded by `sync/atomic.Bool` idempotency. See `docs/architecture.md` for the full scheduler topology (12 loops, 8 always-on + 4 opt-in).
 
 Configuration:
 
@@ -1141,13 +1141,30 @@ API Endpoints:
 - **`GET /api/v1/digest/preview`** — Render digest HTML for preview (no email sent)
 - **`POST /api/v1/digest/send`** — Trigger digest send immediately (outside of schedule)
 
+> **Note (HTTPS-only as of v2.2):** The `curl` examples in this section
+> and below all target the HTTPS-only control plane. Extract the
+> docker-compose self-signed bootstrap CA bundle once and reuse it on
+> every call:
+>
+> ```bash
+> export CA=/tmp/certctl-ca.crt
+> docker compose -f deploy/docker-compose.yml exec -T certctl-server \
+>   cat /etc/certctl/tls/ca.crt > "$CA"
+> ```
+>
+> Then pass `--cacert "$CA"` (or `-k` for one-off smoke tests, never in
+> production). The same pattern is documented in
+> [`quickstart.md`](quickstart.md). Pre-U-2 these examples used `http://`
+> and silently failed against the HTTPS listener; post-U-2 they speak
+> HTTPS with the operator-managed CA bundle.
+
 Example:
 ```bash
 # Preview digest
-curl http://localhost:8443/api/v1/digest/preview | jq '.html'
+curl --cacert "$CA" https://localhost:8443/api/v1/digest/preview | jq '.html'
 
 # Send digest immediately
-curl -X POST http://localhost:8443/api/v1/digest/send
+curl --cacert "$CA" -X POST https://localhost:8443/api/v1/digest/send
 ```
 
 Each notifier is enabled by its configuration env var:
@@ -1294,24 +1311,24 @@ The agent scans these directories on startup and every 6 hours, looking for cert
 
 ```bash
 # List discovered certificates (filter by agent, status)
-curl -s "http://localhost:8443/api/v1/discovered-certificates?agent_id=agent-nginx-01&status=new" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/discovered-certificates?agent_id=agent-nginx-01&status=new" | jq .
 
 # Get discovery detail
-curl -s http://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID | jq .
 
 # Claim a discovered cert (link to managed certificate)
-curl -s -X POST http://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID/claim \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID/claim \
   -H "Content-Type: application/json" \
   -d '{"managed_certificate_id": "mc-api-prod"}' | jq .
 
 # Dismiss a discovery
-curl -s -X POST http://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID/dismiss | jq .
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID/dismiss | jq .
 
 # View discovery scan history
-curl -s http://localhost:8443/api/v1/discovery-scans | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/discovery-scans | jq .
 
 # Summary counts (new, claimed, dismissed)
-curl -s http://localhost:8443/api/v1/discovery-summary | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/discovery-summary | jq .
 ```
 
 ### Use Cases
@@ -1340,7 +1357,7 @@ Network scan targets can be managed from the **Network Scans** dashboard page (c
 
 ```bash
 # Create a scan target for your internal network (or use the dashboard's "+ New Target" button)
-curl -s -X POST http://localhost:8443/api/v1/network-scan-targets \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/network-scan-targets \
   -H "Content-Type: application/json" \
   -d '{
     "name": "Production Web Servers",
@@ -1365,31 +1382,31 @@ curl -s -X POST http://localhost:8443/api/v1/network-scan-targets \
 
 ```bash
 # List all scan targets
-curl -s http://localhost:8443/api/v1/network-scan-targets | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/network-scan-targets | jq .
 
 # Create a scan target
-curl -s -X POST http://localhost:8443/api/v1/network-scan-targets \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/network-scan-targets \
   -H "Content-Type: application/json" \
   -d '{"name": "DMZ", "cidrs": ["172.16.0.0/24"], "ports": [443]}' | jq .
 
 # Get a specific target (includes last_scan_at, last_scan_certs_found)
-curl -s http://localhost:8443/api/v1/network-scan-targets/nst-dmz | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/network-scan-targets/nst-dmz | jq .
 
 # Trigger an immediate scan (doesn't wait for scheduler)
-curl -s -X POST http://localhost:8443/api/v1/network-scan-targets/nst-dmz/scan | jq .
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/network-scan-targets/nst-dmz/scan | jq .
 
 # Update scan configuration
-curl -s -X PUT http://localhost:8443/api/v1/network-scan-targets/nst-dmz \
+curl --cacert "$CA" -s -X PUT https://localhost:8443/api/v1/network-scan-targets/nst-dmz \
   -H "Content-Type: application/json" \
   -d '{"ports": [443, 8443, 9443], "timeout_ms": 3000}' | jq .
 
 # Delete a scan target
-curl -s -X DELETE http://localhost:8443/api/v1/network-scan-targets/nst-dmz
+curl --cacert "$CA" -s -X DELETE https://localhost:8443/api/v1/network-scan-targets/nst-dmz
 ```
 
 ### Scheduler Integration
 
-When `CERTCTL_NETWORK_SCAN_ENABLED=true`, the server runs a 6th scheduler loop (alongside renewal, jobs, health, notifications, and short-lived expiry). It scans all enabled targets at the configured interval (default 6h). Each target tracks `last_scan_at`, `last_scan_duration_ms`, and `last_scan_certs_found` for monitoring scan health.
+When `CERTCTL_NETWORK_SCAN_ENABLED=true`, the server runs the opt-in network scanner scheduler loop alongside the always-on loops (renewal, jobs, job retry, job timeout, agent health, notifications, notification retry, short-lived expiry). It scans all enabled targets at the configured interval (default 6h). Each target tracks `last_scan_at`, `last_scan_duration_ms`, and `last_scan_certs_found` for monitoring scan health. See `docs/architecture.md` for the full 12-loop scheduler topology.
 
 ### Use Cases
 
@@ -1447,7 +1464,7 @@ Source path format: `gcp-sm://{project}/{secret-name}`. Sentinel agent: `cloud-g
 
 ### Cloud Discovery Scheduler
 
-All enabled cloud sources run on a shared scheduler loop (9th loop). The interval is configurable:
+All enabled cloud sources run on a shared opt-in cloud discovery scheduler loop (see `docs/architecture.md` for the full 12-loop scheduler topology). The interval is configurable:
 
 | Variable | Description | Default |
 |---|---|---|

docs/demo-advanced.md

@@ -50,14 +50,17 @@ docker compose -f deploy/docker-compose.yml up -d --build
 docker compose -f deploy/docker-compose.yml ps
 ```
 
-Open **http://localhost:8443** in your browser alongside your terminal. You'll watch changes appear in the dashboard as you make API calls.
+Open **https://localhost:8443** in your browser alongside your terminal. The default compose stack ships a self-signed cert; your browser will show a warning the first time — click through (or trust `deploy/test/certs/ca.crt` in your OS keychain). You'll watch changes appear in the dashboard as you make API calls.
 
-Set up a base variable for convenience:
+Set up base variables for convenience:
 
 ```bash
-API="http://localhost:8443"
+API="https://localhost:8443"
+CA="$PWD/deploy/test/certs/ca.crt"   # pin the self-signed CA for curl
 ```
 
+Every `curl` in this guide uses `--cacert "$CA"` so the TLS handshake verifies against the compose-stack CA instead of the system trust store.
+
 ## How the pieces fit together
 
 Before we start, here's the high-level flow of what we're about to do:
@@ -724,22 +727,24 @@ curl -s -X POST $API/api/v1/certificates/mc-demo-payments/revoke \
 6. Creates an audit trail entry
 7. Sends revocation notifications via configured channels
 
-Check the CRL (Certificate Revocation List):
+Check the CRL (Certificate Revocation List) — served unauthenticated under the RFC 8615 well-known namespace so relying parties without a certctl API key can still verify revocation (RFC 5280 §5):
 
 ```bash
-# JSON-formatted CRL
-curl -s $API/api/v1/crl | jq .
-
-# DER-encoded X.509 CRL for the local CA (binary — pipe to openssl for inspection)
-curl -s $API/api/v1/crl/iss-local -o /tmp/crl.der
+# DER-encoded X.509 CRL for the local CA (binary — pipe to openssl for inspection).
+# Note: no -H "Authorization: Bearer ..." — the endpoint is deliberately
+# unauthenticated. Content-Type is application/pkix-crl.
+curl --cacert "$CA" -s https://localhost:8443/.well-known/pki/crl/iss-local -o /tmp/crl.der
 openssl crl -inform DER -in /tmp/crl.der -text -noout
 ```
 
-Check OCSP status:
+Check OCSP status (RFC 6960, also unauthenticated, `application/ocsp-response`):
 
 ```bash
-# Replace SERIAL with the actual serial number from the certificate version
-curl -s $API/api/v1/ocsp/iss-local/SERIAL | jq .
+# Replace SERIAL with the actual serial number from the certificate version.
+# The embedded OCSP responder returns a signed DER response — parse it with
+# `openssl ocsp -respin` or similar tooling.
+curl --cacert "$CA" -s https://localhost:8443/.well-known/pki/ocsp/iss-local/SERIAL -o /tmp/ocsp.der
+openssl ocsp -respin /tmp/ocsp.der -noverify -resp_text | head -40
 ```
 
 **Why RFC 5280 reason codes:** The reason code isn't just metadata — it tells clients *why* the certificate was revoked. A `keyCompromise` revocation means the private key was exposed and the certificate should be distrusted immediately. A `superseded` revocation means a newer certificate replaced it — less urgent. CRLs and OCSP responses include the reason code so client software can make informed trust decisions.
@@ -944,7 +949,8 @@ certctl includes a standalone CLI tool for command-line users:
 cd cmd/cli && go build -o certctl-cli .
 
 # Export credentials
-export CERTCTL_SERVER_URL="http://localhost:8443"
+export CERTCTL_SERVER_URL="https://localhost:8443"
+export CERTCTL_SERVER_CA_BUNDLE_PATH="$PWD/deploy/test/certs/ca.crt"
 export CERTCTL_API_KEY="test-key-123"
 
 # List certificates (JSON or table format)
@@ -988,7 +994,8 @@ certctl exposes the full REST API via the Model Context Protocol (MCP), enabling
 cd cmd/mcp-server && go build -o mcp-server .
 
 # Export credentials
-export CERTCTL_SERVER_URL="http://localhost:8443"
+export CERTCTL_SERVER_URL="https://localhost:8443"
+export CERTCTL_SERVER_CA_BUNDLE_PATH="$PWD/deploy/test/certs/ca.crt"
 export CERTCTL_API_KEY="test-key-123"
 
 # Start the MCP server (listens on stdin/stdout)
@@ -1046,7 +1053,7 @@ docker compose -f deploy/docker-compose.yml run -e CERTCTL_DISCOVERY_DIRS=/tmp/c
 Or with the CLI flag:
 
 ```bash
-certctl-agent --agent-id a-demo-1 --key-dir /tmp/keys --discovery-dirs /tmp/certs --server http://localhost:8443 --api-key test-key-123
+certctl-agent --agent-id a-demo-1 --key-dir /tmp/keys --discovery-dirs /tmp/certs --server https://localhost:8443 --ca-bundle "$CA" --api-key test-key-123
 ```
 
 ### Network Discovery (Server-Side)
@@ -1153,7 +1160,7 @@ flowchart TB
         API["REST API\nGo net/http"]
         SVC["Service Layer\nBusiness Logic"]
         REPO["Repository Layer\ndatabase/sql + lib/pq"]
-        SCHED["Scheduler\n7 background loops"]
+        SCHED["Scheduler\n12 background loops\n(8 always-on + 4 opt-in)"]
         CONN["Connector Registry\nIssuer + Target + Notifier"]
     end
 
@@ -1189,7 +1196,8 @@ Here's a single script that runs the entire demo end-to-end. Save it as `demo.sh
 #!/bin/bash
 set -e
 
-API="http://localhost:8443"
+API="https://localhost:8443"
+CA="$PWD/deploy/test/certs/ca.crt"   # pin the self-signed CA for curl
 BLUE='\033[0;34m'
 GREEN='\033[0;32m'
 YELLOW='\033[1;33m'
@@ -1297,7 +1305,7 @@ echo "  5. Revoked the certificate with RFC 5280 reason codes"
 echo "  6. Checked dashboard stats and metrics"
 echo "  7. All actions recorded in the audit trail"
 echo ""
-echo -e "Open ${GREEN}http://localhost:8443${NC} to see everything in the dashboard."
+echo -e "Open ${GREEN}https://localhost:8443${NC} to see everything in the dashboard."
 echo "Look for certificate: $CERT_ID"
 ```
 

docs/features.md

@@ -16,7 +16,7 @@ Complete reference of every feature shipped in certctl through v2.1.0 (April 202
 | Target connectors | 14 |
 | Notifier connectors | 6 channels |
 | Database tables | 21 (across 10 migrations) |
-| Background scheduler loops | 7 |
+| Background scheduler loops | 12 (8 always-on + 4 opt-in) |
 | Web dashboard pages | 24 |
 | Test functions | 1850+ |
 | Supported platforms | linux/amd64, linux/arm64, darwin/amd64, darwin/arm64 |
@@ -228,14 +228,15 @@ Revocation is a 7-step process: validate eligibility → get serial → update s
 - Audit trail: single `bulk_revocation_initiated` event logs the criteria and actor
 - Optional `--reason` defaults to `unspecified` if omitted
 
-### CRL Endpoints
+### CRL Endpoint
 
-- `GET /api/v1/crl` — JSON-formatted CRL (version, entries array, total count, timestamp)
-- `GET /api/v1/crl/{issuer_id}` — DER-encoded X.509 CRL signed by issuing CA, 24-hour validity
+- `GET /.well-known/pki/crl/{issuer_id}` — DER-encoded X.509 CRL signed by the issuing CA, 24-hour validity (RFC 5280 §5 + RFC 8615). Served unauthenticated with `Content-Type: application/pkix-crl` so relying parties without certctl API credentials can fetch it.
+
+Prior non-standard JSON CRL and authenticated `/api/v1/crl*` paths were removed in M-006 — RFC 5280 defines only the DER wire format and relying parties do not have API keys.
 
 ### OCSP Responder
 
-`GET /api/v1/ocsp/{issuer_id}/{serial}` — signed OCSP responses (good/revoked/unknown). Signs with issuing CA key. Requires CA key access (Local CA, step-CA connectors).
+`GET /.well-known/pki/ocsp/{issuer_id}/{serial}` — signed OCSP responses (good/revoked/unknown) per RFC 6960. Served unauthenticated with `Content-Type: application/ocsp-response`. Signs with the issuing CA key; requires CA key access (Local CA, step-CA connectors).
 
 ### Short-Lived Certificate Exemption
 
@@ -902,7 +903,7 @@ Server-side active TLS scanning of CIDR ranges. Concurrent probing with semaphor
 
 <!-- Source: internal/connector/discovery/awssm/, azurekv/, gcpsm/, internal/service/cloud_discovery.go -->
 
-Discovers certificates stored in cloud secret managers and brings them into the certctl inventory. Extends the existing discovery pipeline with pluggable `DiscoverySource` implementations. Each source runs as part of the 9th scheduler loop (6h default).
+Discovers certificates stored in cloud secret managers and brings them into the certctl inventory. Extends the existing discovery pipeline with pluggable `DiscoverySource` implementations. Each source runs as part of the opt-in cloud discovery scheduler loop (6h default; see `docs/architecture.md` for the full 12-loop scheduler topology).
 
 **Supported sources:**
 
@@ -1096,17 +1097,22 @@ Single SQL `UNION` query replaces the previous "fetch all, filter in Go" approac
 
 <!-- Source: internal/scheduler/scheduler.go -->
 
-7 background loops, each with an `atomic.Bool` idempotency guard preventing concurrent tick execution. `sync.WaitGroup` + `WaitForCompletion()` for graceful shutdown.
+12 background loops (8 always-on + 4 opt-in), each with an `atomic.Bool` idempotency guard preventing concurrent tick execution. `sync.WaitGroup` + `WaitForCompletion()` for graceful shutdown. Authoritative topology table lives in `docs/architecture.md`.
 
-| Loop | Default Interval | Description |
-|---|---|---|
-| Renewal check | 1 hour | Check expiring certs, query ARI, create renewal jobs |
-| Job processor | 30 seconds | Process pending jobs |
-| Agent health check | 2 minutes | Check agent heartbeat staleness |
-| Notification processor | 1 minute | Send queued notifications |
-| Short-lived expiry check | 30 seconds | Mark short-lived certs expired |
-| Network scan | 6 hours | Run network discovery scans |
-| Digest | 24 hours | Send certificate digest email (does not run on startup) |
+| Loop | Default Interval | Always-on | Env Var | Description |
+|---|---|---|---|---|
+| Renewal check | 1 hour | Yes | — | Check expiring certs, query ARI, create renewal jobs |
+| Job processor | 30 seconds | Yes | — | Process pending jobs |
+| Job retry | 5 minutes | Yes | `CERTCTL_SCHEDULER_RETRY_INTERVAL` | Retry Failed jobs (I-001) |
+| Job timeout reaper | 10 minutes | Yes | `CERTCTL_JOB_TIMEOUT_INTERVAL` | Fail AwaitingCSR/AwaitingApproval jobs past timeout (I-003) |
+| Agent health check | 2 minutes | Yes | — | Check agent heartbeat staleness |
+| Notification processor | 1 minute | Yes | — | Send queued notifications |
+| Notification retry | 2 minutes | Yes | `CERTCTL_NOTIFICATION_RETRY_INTERVAL` | Exponential backoff retry for failed notifications; promote to dead-letter after 5 attempts (I-005) |
+| Short-lived expiry check | 30 seconds | Yes | — | Mark short-lived certs expired |
+| Network scan | 6 hours | Opt-in | `CERTCTL_NETWORK_SCAN_ENABLED` | Run network discovery scans |
+| Digest | 24 hours | Opt-in | `CERTCTL_DIGEST_INTERVAL` | Send certificate digest email (does not run on startup) |
+| Endpoint health | 60 seconds | Opt-in | `CERTCTL_HEALTH_CHECK_INTERVAL` | Continuous TLS health probes (M48) |
+| Cloud discovery | 6 hours | Opt-in | `CERTCTL_CLOUD_DISCOVERY_INTERVAL` | Cloud secret manager certificate discovery (M50) |
 
 ---
 

docs/mcp.md

@@ -29,15 +29,18 @@ The binary has zero runtime dependencies beyond the certctl server it connects t
 
 ## Configuration
 
-The MCP server reads two environment variables:
+The MCP server reads three environment variables:
 
 | Variable | Required | Default | Description |
 |----------|----------|---------|-------------|
-| `CERTCTL_SERVER_URL` | No | `http://localhost:8443` | URL of the certctl REST API |
+| `CERTCTL_SERVER_URL` | No | `https://localhost:8443` | URL of the certctl REST API (HTTPS-only as of v2.2) |
 | `CERTCTL_API_KEY` | No | (empty) | API key for authentication (passed as `Bearer` token) |
+| `CERTCTL_SERVER_CA_BUNDLE_PATH` | Yes (for self-signed / internal CA) | (empty) | Path to PEM CA bundle that signed the server cert. Required when the server cert isn't rooted in the system trust store (the default compose stack ships a self-signed cert at `deploy/test/certs/ca.crt`). |
 
 If your certctl server has auth enabled (the default), you must provide the API key. The MCP server passes it through to every HTTP request.
 
+Since v2.2 the certctl control plane is HTTPS-only. If the server cert is self-signed or chained to an internal CA, set `CERTCTL_SERVER_CA_BUNDLE_PATH` so the MCP server can verify the TLS handshake. Never set `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true` outside local development — it disables all certificate validation.
+
 ## Setting Up with Claude Desktop
 
 Add this to your Claude Desktop MCP configuration file (`~/Library/Application Support/Claude/claude_desktop_config.json` on macOS, `%APPDATA%\Claude\claude_desktop_config.json` on Windows):
@@ -48,7 +51,8 @@ Add this to your Claude Desktop MCP configuration file (`~/Library/Application S
     "certctl": {
       "command": "/path/to/certctl-mcp",
       "env": {
-        "CERTCTL_SERVER_URL": "http://localhost:8443",
+        "CERTCTL_SERVER_URL": "https://localhost:8443",
+        "CERTCTL_SERVER_CA_BUNDLE_PATH": "/path/to/certctl/deploy/test/certs/ca.crt",
         "CERTCTL_API_KEY": "your-api-key-here"
       }
     }
@@ -67,7 +71,8 @@ In Cursor, go to Settings → MCP Servers and add:
   "certctl": {
     "command": "/path/to/certctl-mcp",
     "env": {
-      "CERTCTL_SERVER_URL": "http://localhost:8443",
+      "CERTCTL_SERVER_URL": "https://localhost:8443",
+      "CERTCTL_SERVER_CA_BUNDLE_PATH": "/path/to/certctl/deploy/test/certs/ca.crt",
       "CERTCTL_API_KEY": "your-api-key-here"
     }
   }
@@ -84,7 +89,8 @@ Add certctl as an MCP server in your project's `.mcp.json`:
     "certctl": {
       "command": "/path/to/certctl-mcp",
       "env": {
-        "CERTCTL_SERVER_URL": "http://localhost:8443",
+        "CERTCTL_SERVER_URL": "https://localhost:8443",
+        "CERTCTL_SERVER_CA_BUNDLE_PATH": "/path/to/certctl/deploy/test/certs/ca.crt",
         "CERTCTL_API_KEY": "your-api-key-here"
       }
     }

docs/migrate-from-acmesh.md

@@ -34,7 +34,7 @@ cd certctl/deploy
 docker compose up -d
 ```
 
-Access the dashboard at `http://localhost:8443` with API key from `.env` file.
+Access the dashboard at `https://localhost:8443` with the API key from `.env`. The default compose stack ships a self-signed cert; pin with `--cacert ./deploy/test/certs/ca.crt` when calling the API from the host.
 
 ### 2. Deploy Agents
 

docs/migrate-from-certbot.md

@@ -22,7 +22,7 @@ Option A: Docker Compose (quickest for evaluation)
 ```bash
 cd /opt/certctl
 docker compose up -d
-# Dashboard & API: http://localhost:8443
+# Dashboard & API: https://localhost:8443 (self-signed cert — use --cacert ./deploy/test/certs/ca.crt for the default compose stack)
 # Default API key in logs (grep CERTCTL_API_KEY docker logs certctl-server)
 ```
 
@@ -45,7 +45,8 @@ chmod +x /usr/local/bin/certctl-agent
 # Create config
 sudo mkdir -p /etc/certctl /var/lib/certctl/keys
 sudo tee /etc/certctl/agent.env > /dev/null <<EOF
-CERTCTL_SERVER_URL=http://certctl-control-plane.example.com:8443
+CERTCTL_SERVER_URL=https://certctl-control-plane.example.com:8443
+CERTCTL_SERVER_CA_BUNDLE_PATH=/etc/certctl/tls/ca.crt
 CERTCTL_API_KEY=your-api-key-here
 CERTCTL_DISCOVERY_DIRS=/etc/letsencrypt/live
 CERTCTL_KEY_DIR=/var/lib/certctl/keys

docs/openapi.md

@@ -68,8 +68,10 @@ The spec organizes endpoints into 16 tags:
 The spec declares a `bearerAuth` security scheme applied globally. All endpoints under `/api/v1/` require a Bearer token by default:
 
 ```bash
-curl -H "Authorization: Bearer your-api-key" \
-  http://localhost:8443/api/v1/certificates
+# The default compose stack uses a self-signed cert; pin with --cacert
+curl --cacert ./deploy/test/certs/ca.crt \
+  -H "Authorization: Bearer your-api-key" \
+  https://localhost:8443/api/v1/certificates
 ```
 
 Three endpoints are exempt from auth (declared with `security: []` in the spec): `/health`, `/ready`, and `/api/v1/auth/info`. The auth info endpoint tells clients whether authentication is enabled and what type is required — useful for GUIs that need to show/hide a login screen.
@@ -150,8 +152,9 @@ Import the spec directly into Postman:
 
 1. Open Postman → Import → File → select `api/openapi.yaml`
 2. Postman creates a collection with all 78 documented operations organized by tag
-3. Set the `baseUrl` variable to `http://localhost:8443`
+3. Set the `baseUrl` variable to `https://localhost:8443` (HTTPS-only as of v2.2)
 4. Add an `Authorization: Bearer your-api-key` header to the collection
+5. Import the demo stack CA bundle (`deploy/test/certs/ca.crt`) into Postman's Settings → Certificates → CA Certificates, or disable certificate verification for the `localhost` host (Settings → General → SSL certificate verification)
 
 ## Key Schemas
 
@@ -176,8 +179,10 @@ Use the spec to generate contract tests that verify the API matches the spec:
 ```bash
 # Using schemathesis for fuzz testing against the spec
 pip install schemathesis
+# The default compose stack uses a self-signed cert — export a CA bundle or set REQUESTS_CA_BUNDLE
+export REQUESTS_CA_BUNDLE=$(pwd)/deploy/test/certs/ca.crt
 schemathesis run api/openapi.yaml \
-  --base-url http://localhost:8443 \
+  --base-url https://localhost:8443 \
   --header "Authorization: Bearer your-api-key"
 ```
 

docs/qa-test-guide.md

@@ -85,10 +85,12 @@ go test -tags qa -v -timeout 10m ./...
 
 | Variable | Default | Description |
 |---|---|---|
-| `CERTCTL_QA_SERVER_URL` | `http://localhost:8443` | certctl server URL |
+| `CERTCTL_QA_SERVER_URL` | `https://localhost:8443` | certctl server URL (HTTPS-only as of v2.2) |
 | `CERTCTL_QA_API_KEY` | `change-me-in-production` | API key for Bearer auth |
 | `CERTCTL_QA_DB_URL` | `postgres://certctl:certctl@localhost:5432/certctl?sslmode=disable` | PostgreSQL connection string |
 | `CERTCTL_QA_REPO_DIR` | `../..` | Path to certctl repo root (for source file checks) |
+| `CERTCTL_QA_CA_BUNDLE` | `./certs/ca.crt` | PEM CA bundle pinned for TLS verification. The demo stack's `certctl-tls-init` container writes here. |
+| `CERTCTL_QA_INSECURE` | `false` | Set to `"true"` to skip TLS verification (e.g. before the init container finishes). Never use outside the demo harness. |
 
 ## Part-by-Part Coverage Map
 
@@ -256,8 +258,8 @@ docker compose -f docker-compose.yml -f docker-compose.demo.yml ps
 # Check server logs
 docker compose -f docker-compose.yml -f docker-compose.demo.yml logs certctl-server
 
-# Check if the port is exposed
-curl -s http://localhost:8443/health
+# Check if the port is exposed (self-signed cert — pin CA bundle)
+curl --cacert ./deploy/test/certs/ca.crt -s https://localhost:8443/health
 ```
 
 ### "connect to QA DB" failure

docs/quickstart.md

@@ -60,6 +60,8 @@ cp deploy/.env.example deploy/.env
 docker compose -f deploy/docker-compose.yml up -d --build
 ```
 
+> **Warning:** Edit `POSTGRES_PASSWORD` *before* the very first `docker compose up`. Postgres seeds the password into its data directory only on first boot of an empty volume — after that, the password is baked into `pg_authid` and the env var is ignored. If you boot once with the default and later change `POSTGRES_PASSWORD` in `.env`, the certctl-server container picks up the new value but postgres still authenticates against the old one, and the server logs `pq: password authentication failed for user "certctl"` (SQLSTATE 28P01). Two ways out: tear down the volume with `docker compose -f deploy/docker-compose.yml down -v` (this **deletes all data**) and bring up fresh, or rotate non-destructively with `docker compose -f deploy/docker-compose.yml exec postgres psql -U certctl -c "ALTER ROLE certctl PASSWORD '<new>';"` and then restart certctl-server with the matching `POSTGRES_PASSWORD`.
+
 ### Docker Compose Environments
 
 The `deploy/` directory contains four compose files for different use cases:
@@ -105,16 +107,24 @@ certctl-server       Up (healthy)
 certctl-agent        Up
 ```
 
+The control plane is HTTPS-only as of v2.2. The `certctl-tls-init` init container in the shipped `deploy/docker-compose.yml` self-signs a cert on first boot and drops it into a named volume. Extract the CA bundle once and reuse it for every API call in this guide:
+
 ```bash
-curl http://localhost:8443/health
+export CA=/tmp/certctl-ca.crt
+docker compose -f deploy/docker-compose.yml exec -T certctl-server \
+  cat /etc/certctl/tls/ca.crt > "$CA"
+
+curl --cacert "$CA" https://localhost:8443/health
 ```
 ```json
 {"status":"healthy"}
 ```
 
+If you're bringing your own cert (internal CA, cert-manager, operator-supplied Secret), see [`docs/tls.md`](tls.md) for the full provisioning matrix. If you're cutting over an existing install, see [`docs/upgrade-to-tls.md`](upgrade-to-tls.md) for the failure modes (out-of-date `http://…` agents fail at the TLS handshake) and the one-step procedure.
+
 ## Open the Dashboard
 
-Open **http://localhost:8443** in your browser.
+Open **https://localhost:8443** in your browser. Your browser will warn about the self-signed cert — that's expected for the demo bootstrap. Trust the CA bundle you just exported, or click through the warning.
 
 > **Note:** The Docker Compose demo runs with authentication disabled (`CERTCTL_AUTH_TYPE=none`) so you can explore immediately. For production, set `CERTCTL_AUTH_TYPE=api-key` and `CERTCTL_AUTH_SECRET=<your-secret>` in your environment, then pass `Authorization: Bearer <your-secret>` on all API requests. The dashboard will prompt for your API key on first load.
 >
@@ -154,62 +164,64 @@ Everything you see in the dashboard is backed by the REST API. All endpoints liv
 
 ### Core operations
 
+Every request below uses `--cacert "$CA"` to pin the self-signed CA bundle extracted above. In production, point `$CA` at your internal CA root or the bundle you distributed to the fleet.
+
 ```bash
 # List all certificates
-curl -s http://localhost:8443/api/v1/certificates | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/certificates | jq .
 
 # Filter by status
-curl -s "http://localhost:8443/api/v1/certificates?status=Expiring" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?status=Expiring" | jq .
 
 # Filter by environment
-curl -s "http://localhost:8443/api/v1/certificates?environment=production" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?environment=production" | jq .
 
 # Get a specific certificate
-curl -s http://localhost:8443/api/v1/certificates/mc-api-prod | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/certificates/mc-api-prod | jq .
 
 # Get deployment targets for a certificate
-curl -s http://localhost:8443/api/v1/certificates/mc-api-prod/deployments | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/certificates/mc-api-prod/deployments | jq .
 
 # List agents
-curl -s http://localhost:8443/api/v1/agents | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/agents | jq .
 
 # Check agent pending work
-curl -s http://localhost:8443/api/v1/agents/ag-web-prod/work | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/agents/ag-web-prod/work | jq .
 
 # View audit trail
-curl -s http://localhost:8443/api/v1/audit | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/audit | jq .
 
 # View policies and violations
-curl -s http://localhost:8443/api/v1/policies | jq .
-curl -s http://localhost:8443/api/v1/policies/pr-require-owner/violations | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/policies | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/policies/pr-require-owner/violations | jq .
 
 # Notifications
-curl -s http://localhost:8443/api/v1/notifications | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/notifications | jq .
 
 # Profiles and agent groups
-curl -s http://localhost:8443/api/v1/profiles | jq .
-curl -s http://localhost:8443/api/v1/agent-groups | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/profiles | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/agent-groups | jq .
 ```
 
 ### Sorting, filtering, and pagination
 
 ```bash
 # Sort by expiration date (ascending)
-curl -s "http://localhost:8443/api/v1/certificates?sort=notAfter" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?sort=notAfter" | jq .
 
 # Sort descending (prefix with -)
-curl -s "http://localhost:8443/api/v1/certificates?sort=-createdAt" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?sort=-createdAt" | jq .
 
 # Time-range filters (RFC3339)
-curl -s "http://localhost:8443/api/v1/certificates?expires_before=2026-05-01T00:00:00Z" | jq .
-curl -s "http://localhost:8443/api/v1/certificates?created_after=2026-03-01T00:00:00Z" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?expires_before=2026-05-01T00:00:00Z" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?created_after=2026-03-01T00:00:00Z" | jq .
 
 # Sparse fields — request only what you need
-curl -s "http://localhost:8443/api/v1/certificates?fields=id,common_name,status,expires_at" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?fields=id,common_name,status,expires_at" | jq .
 
 # Cursor pagination — efficient for large inventories
-curl -s "http://localhost:8443/api/v1/certificates?page_size=5" | jq '{next_cursor: .next_cursor, count: (.data | length)}'
-curl -s "http://localhost:8443/api/v1/certificates?cursor=<next_cursor_value>&page_size=5" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?page_size=5" | jq '{next_cursor: .next_cursor, count: (.data | length)}'
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/certificates?cursor=<next_cursor_value>&page_size=5" | jq .
 ```
 
 Supported sort fields: `notAfter`, `expiresAt`, `createdAt`, `updatedAt`, `commonName`, `name`, `status`, `environment`.
@@ -218,22 +230,22 @@ Supported sort fields: `notAfter`, `expiresAt`, `createdAt`, `updatedAt`, `commo
 
 ```bash
 # Dashboard summary
-curl -s http://localhost:8443/api/v1/stats/summary | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/stats/summary | jq .
 
 # Certificates by status
-curl -s http://localhost:8443/api/v1/stats/certificates-by-status | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/stats/certificates-by-status | jq .
 
 # Expiration timeline (next 90 days)
-curl -s "http://localhost:8443/api/v1/stats/expiration-timeline?days=90" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/stats/expiration-timeline?days=90" | jq .
 
 # Job trends (last 30 days)
-curl -s "http://localhost:8443/api/v1/stats/job-trends?days=30" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/stats/job-trends?days=30" | jq .
 
 # JSON metrics
-curl -s http://localhost:8443/api/v1/metrics | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/metrics | jq .
 
 # Prometheus format (for Prometheus, Grafana Agent, Datadog)
-curl -s http://localhost:8443/api/v1/metrics/prometheus
+curl --cacert "$CA" -s https://localhost:8443/api/v1/metrics/prometheus
 ```
 
 ## Create Your First Certificate
@@ -241,7 +253,7 @@ curl -s http://localhost:8443/api/v1/metrics/prometheus
 Create a certificate record that certctl will track, renew, and deploy automatically.
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates \
   -H "Content-Type: application/json" \
   -d '{
     "name": "My First Certificate",
@@ -264,31 +276,34 @@ CERT_ID="<paste the id from the response>"
 
 Trigger renewal:
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates/$CERT_ID/renew | jq .
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/$CERT_ID/renew | jq .
 ```
 
 Check the result:
 ```bash
-curl -s http://localhost:8443/api/v1/certificates/$CERT_ID | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/certificates/$CERT_ID | jq .
 ```
 
-Refresh the dashboard at http://localhost:8443 — your new certificate appears in the inventory.
+Refresh the dashboard at https://localhost:8443 — your new certificate appears in the inventory.
 
 ### Revoke a certificate
 
 When a private key is compromised or a service is decommissioned:
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates/$CERT_ID/revoke \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/$CERT_ID/revoke \
   -H "Content-Type: application/json" \
   -d '{"reason": "superseded"}' | jq .
 ```
 
 Supported RFC 5280 reason codes: `unspecified`, `keyCompromise`, `caCompromise`, `affiliationChanged`, `superseded`, `cessationOfOperation`, `certificateHold`, `privilegeWithdrawn`.
 
-Confirm via CRL:
+Confirm via the unauthenticated DER CRL (RFC 5280 §5, RFC 8615):
 ```bash
-curl -s http://localhost:8443/api/v1/crl | jq .
+# Fetch the CRL without any API key — relying parties shouldn't need one.
+# The CRL path is unauthenticated, but it's still served over TLS.
+curl --cacert "$CA" -s https://localhost:8443/.well-known/pki/crl/iss-local -o /tmp/crl.der
+openssl crl -inform der -in /tmp/crl.der -noout -text | head -40
 ```
 
 ### Interactive approval workflow
@@ -297,15 +312,15 @@ For high-value certificates where you want human oversight. The demo includes 2
 
 ```bash
 # List jobs awaiting approval (demo includes 2)
-curl -s "http://localhost:8443/api/v1/jobs?status=AwaitingApproval" | jq '.data[] | {id, certificate_id, status}'
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/jobs?status=AwaitingApproval" | jq '.data[] | {id, certificate_id, status}'
 
 # Approve a pending job
-curl -s -X POST http://localhost:8443/api/v1/jobs/JOB_ID/approve \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/jobs/JOB_ID/approve \
   -H "Content-Type: application/json" \
   -d '{"reason": "Approved for production deployment"}' | jq .
 
 # Reject a pending job
-curl -s -X POST http://localhost:8443/api/v1/jobs/JOB_ID/reject \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/jobs/JOB_ID/reject \
   -H "Content-Type: application/json" \
   -d '{"reason": "Key type does not meet compliance requirements"}' | jq .
 ```
@@ -331,7 +346,7 @@ export CERTCTL_DISCOVERY_DIRS="/etc/nginx/certs,/etc/ssl/certs,/var/lib/certs"
 export CERTCTL_NETWORK_SCAN_ENABLED=true
 
 # Create a scan target
-curl -s -X POST http://localhost:8443/api/v1/network-scan-targets \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/network-scan-targets \
   -H "Content-Type: application/json" \
   -d '{
     "name": "Internal Network",
@@ -343,20 +358,20 @@ curl -s -X POST http://localhost:8443/api/v1/network-scan-targets \
   }' | jq .
 
 # Trigger an immediate scan
-curl -s -X POST http://localhost:8443/api/v1/network-scan-targets/nst-internal-network/scan | jq .
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/network-scan-targets/nst-internal-network/scan | jq .
 ```
 
 ### Triage discovered certificates
 
 ```bash
 # List discovered certs
-curl -s "http://localhost:8443/api/v1/discovered-certificates?agent_id=agent-nginx-prod" | jq .
+curl --cacert "$CA" -s "https://localhost:8443/api/v1/discovered-certificates?agent_id=agent-nginx-prod" | jq .
 
 # Summary counts
-curl -s http://localhost:8443/api/v1/discovery-summary | jq .
+curl --cacert "$CA" -s https://localhost:8443/api/v1/discovery-summary | jq .
 
 # Claim a discovered cert (bring under management)
-curl -s -X POST "http://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID/claim" \
+curl --cacert "$CA" -s -X POST "https://localhost:8443/api/v1/discovered-certificates/DISCOVERY_ID/claim" \
   -H "Content-Type: application/json" \
   -d '{"managed_certificate_id": "mc-api-prod"}' | jq .
 ```
@@ -366,8 +381,9 @@ curl -s -X POST "http://localhost:8443/api/v1/discovered-certificates/DISCOVERY_
 ```bash
 cd cmd/cli && go build -o certctl-cli .
 
-export CERTCTL_SERVER_URL="http://localhost:8443"
+export CERTCTL_SERVER_URL="https://localhost:8443"
 export CERTCTL_API_KEY="test-key-123"
+export CERTCTL_SERVER_CA_BUNDLE_PATH="$CA"   # or pass --ca-bundle; --insecure for dev self-signed
 
 ./certctl-cli certs list               # List certificates
 ./certctl-cli certs get mc-api-prod    # Certificate details
@@ -400,10 +416,10 @@ export CERTCTL_DIGEST_RECIPIENTS=ops@example.com,security@example.com
 
 Preview the digest HTML before enabling scheduled delivery:
 ```bash
-curl http://localhost:8443/api/v1/digest/preview | jq '.html' | grep -o '<html>' # Shows HTML is ready
+curl --cacert "$CA" https://localhost:8443/api/v1/digest/preview | jq '.html' | grep -o '<html>' # Shows HTML is ready
 
 # Trigger a digest send immediately (outside of schedule)
-curl -X POST http://localhost:8443/api/v1/digest/send
+curl --cacert "$CA" -X POST https://localhost:8443/api/v1/digest/send
 ```
 
 If no recipients are configured (`CERTCTL_DIGEST_RECIPIENTS` empty), the digest falls back to certificate owner emails. Digests include total certificates, expiring soon, expired, active agents, completed/failed jobs (30-day summary), and a table of expiring certs color-coded by urgency (7/14/30 days).
@@ -413,8 +429,9 @@ If no recipients are configured (`CERTCTL_DIGEST_RECIPIENTS` empty), the digest
 ```bash
 cd cmd/mcp-server && go build -o mcp-server .
 
-export CERTCTL_SERVER_URL="http://localhost:8443"
+export CERTCTL_SERVER_URL="https://localhost:8443"
 export CERTCTL_API_KEY="test-key-123"
+export CERTCTL_SERVER_CA_BUNDLE_PATH="$CA"   # MCP is env-vars-only; no CLI flags
 
 ./mcp-server
 ```

docs/test-env.md

@@ -16,7 +16,7 @@ You'll start 7 Docker containers that talk to each other:
 | **pebble-challtestsrv** | DNS/HTTP challenge test server for Pebble | 10.30.50.3 | Not directly — Pebble talks to it |
 | **Pebble** | A fake Let's Encrypt (tests the ACME protocol without touching the real internet) | 10.30.50.4 | Not directly — the server talks to it |
 | **step-ca** | A private Certificate Authority (think: your company's internal CA) | 10.30.50.5 | Not directly — the server talks to it |
-| **certctl-server** | The brain. API + web dashboard + scheduler + ACME challenge server | 10.30.50.6 | **http://localhost:8443** |
+| **certctl-server** | The brain. API + web dashboard + scheduler + ACME challenge server | 10.30.50.6 | **https://localhost:8443** (self-signed — see CA-bundle note below) |
 | **NGINX** | A web server. The agent deploys certificates here. | 10.30.50.7 | **https://localhost:8444** |
 | **certctl-agent** | The hands. Generates keys, deploys certs to NGINX | 10.30.50.8 | Not directly — it talks to the server |
 
@@ -123,7 +123,7 @@ docker compose -f docker-compose.test.yml up --build
 
 ```
 certctl-test-server    | {"level":"INFO","msg":"server started","address":"0.0.0.0:8443"}
-certctl-test-agent     | {"level":"INFO","msg":"agent starting","server_url":"http://certctl-server:8443"}
+certctl-test-agent     | {"level":"INFO","msg":"agent starting","server_url":"https://certctl-server:8443"}
 certctl-test-stepca    | Serving HTTPS on :9000 ...
 certctl-test-pebble    | Listening on: 0.0.0.0:14000
 ```
@@ -159,13 +159,29 @@ certctl-test-stepca         Up (healthy)
 
 **If certctl-test-server says "Restarting"**: It probably started before step-ca or Pebble were ready. Wait 30 seconds and check again. If it keeps restarting, see [Troubleshooting](#troubleshooting).
 
+### Get the CA bundle for curl
+
+The test harness runs HTTPS-only (the `certctl-tls-init` init container self-signs an ECDSA-P256 server cert with a SHA-256 signature into a bind-mounted directory before the server starts — see `docker-compose.test.yml` §`certctl-tls-init` for details). The CA cert that signed it is materialized on the host at `./test/certs/ca.crt` (relative to the `deploy/` directory). Every `curl` in the rest of this doc expects it in `$CA`:
+
+```bash
+export CA=$PWD/test/certs/ca.crt
+ls -la "$CA"  # sanity check: file should exist and be non-empty
+curl --cacert "$CA" -f https://localhost:8443/health
+```
+
+Expect `{"status":"ok"}`. If `curl` errors with `SSL certificate problem: unable to get local issuer certificate`, the init container hasn't finished yet — wait a few seconds and retry. If the file doesn't exist at all, the bind mount didn't populate; `docker compose -f docker-compose.test.yml logs certctl-tls-init` should show the self-sign ran.
+
+For a full explanation of the cert provisioning patterns (self-signed bootstrap, operator-supplied, cert-manager), see [`tls.md`](tls.md). For the one-step cutover from the old plaintext test harness to HTTPS, see [`upgrade-to-tls.md`](upgrade-to-tls.md).
+
 ---
 
 ## Step 2: Open the Dashboard
 
 Open your web browser and go to:
 
-**http://localhost:8443**
+**https://localhost:8443**
+
+Your browser will warn you that the cert is self-signed ("Your connection is not private" / "NET::ERR_CERT_AUTHORITY_INVALID"). That's expected for the test harness — the CA that signed the cert lives at `deploy/test/certs/ca.crt` and isn't in your system trust store. Click through the warning (Chrome: "Advanced" → "Proceed"; Firefox: "Accept the Risk"; Safari: "Show Details" → "visit this website").
 
 You'll see a login screen asking for an API key. Enter:
 
@@ -198,12 +214,13 @@ Go back to your second terminal. Let's verify the data loaded correctly.
 ### Check the agent
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/agents | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/agents | python3 -m json.tool
 ```
 
 **What this command does**:
-- `curl` makes an HTTP request (like a browser but from the terminal)
+- `curl` makes an HTTPS request (like a browser but from the terminal)
+- `--cacert "$CA"` pins the test harness's self-signed root as the only trust anchor for this call — matches what you exported in Step 1
 - `-s` means "silent" (don't show progress bars)
 - `-H "Authorization: Bearer test-key-2026"` sends the API key (same one you used to log in)
 - `python3 -m json.tool` formats the JSON response so it's readable
@@ -233,8 +250,8 @@ The important parts: `"id": "agent-test-01"` and `"status": "online"`. If the st
 ### Check the issuers
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/issuers | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/issuers | python3 -m json.tool
 ```
 
 You should see three issuers:
@@ -245,8 +262,8 @@ You should see three issuers:
 ### Check the target
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/targets | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/targets | python3 -m json.tool
 ```
 
 You should see `target-test-nginx` — the NGINX deployment target, assigned to `agent-test-01`.
@@ -255,7 +272,7 @@ The target config uses no-op commands for `reload_command` and `validate_command
 
 ### See it all in the dashboard
 
-Open the dashboard at http://localhost:8443 and click through the sidebar:
+Open the dashboard at https://localhost:8443 and click through the sidebar:
 - **Agents** — you should see `test-agent-01`
 - **Issuers** — you should see all three CAs
 - **Targets** — you should see `Test NGINX`
@@ -287,7 +304,7 @@ The private key **never leaves the agent**. The server only ever sees the CSR (p
 ### Step 4a: Create the certificate record
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates \
   -H "Authorization: Bearer test-key-2026" \
   -H "Content-Type: application/json" \
   -d '{
@@ -338,7 +355,7 @@ docker exec certctl-test-postgres psql -U certctl -d certctl -c \
 ### Step 4c: Trigger issuance
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates/mc-local-test/renew \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/mc-local-test/renew \
   -H "Authorization: Bearer test-key-2026" | python3 -m json.tool
 ```
 
@@ -395,7 +412,7 @@ The `subject` should match the domain name you chose. The `issuer` should say "c
 
 ### Step 4f: Check the dashboard
 
-Open the dashboard at http://localhost:8443 and:
+Open the dashboard at https://localhost:8443 and:
 
 1. Click **Certificates** in the sidebar — you should see `mc-local-test` with status "Active"
 2. Click on it to see the detail page — you should see version history, the signed certificate details, and the deployment timeline
@@ -414,7 +431,7 @@ This is the real deal. ACME is the protocol that Let's Encrypt uses to issue cer
 ### Step 5a: Create the certificate record
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates \
   -H "Authorization: Bearer test-key-2026" \
   -H "Content-Type: application/json" \
   -d '{
@@ -441,7 +458,7 @@ docker exec certctl-test-postgres psql -U certctl -d certctl -c \
   "INSERT INTO certificate_target_mappings (certificate_id, target_id) VALUES ('mc-acme-test', 'target-test-nginx') ON CONFLICT DO NOTHING;"
 
 # Trigger issuance
-curl -s -X POST http://localhost:8443/api/v1/certificates/mc-acme-test/renew \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/mc-acme-test/renew \
   -H "Authorization: Bearer test-key-2026" | python3 -m json.tool
 ```
 
@@ -502,7 +519,7 @@ Revocation means "this certificate is no longer trusted, even though it hasn't e
 ### Step 7a: Revoke the Local CA cert
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates/mc-local-test/revoke \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/mc-local-test/revoke \
   -H "Authorization: Bearer test-key-2026" \
   -H "Content-Type: application/json" \
   -d '{"reason": "superseded"}' | python3 -m json.tool
@@ -512,12 +529,15 @@ curl -s -X POST http://localhost:8443/api/v1/certificates/mc-local-test/revoke \
 
 ### Step 7b: Check the CRL (Certificate Revocation List)
 
+The CRL is a DER-encoded X.509 v2 CRL (RFC 5280 §5) served under the RFC 8615 well-known namespace. It is deliberately unauthenticated — relying parties that need to verify revocation don't have certctl API keys.
+
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/crl | python3 -m json.tool
+# No Authorization header — the endpoint is public by design.
+curl --cacert "$CA" -s https://localhost:8443/.well-known/pki/crl/iss-local -o /tmp/crl.der
+openssl crl -inform der -in /tmp/crl.der -noout -text | head -40
 ```
 
-**What you should see**: A list that includes the revoked certificate's serial number, the reason, and the timestamp.
+**What you should see**: `openssl` prints the CRL issuer DN, `This Update` / `Next Update` timestamps, and at least one entry whose `Serial Number` matches the cert you just revoked, with `CRL Reason Code: Superseded` (or whichever reason you passed in step 7a). The response's `Content-Type` header is `application/pkix-crl`.
 
 ### Step 7c: Check in the dashboard
 
@@ -530,8 +550,8 @@ Go to **Certificates** in the sidebar. The `mc-local-test` cert should now show
 The agent is configured to scan `/nginx-certs` every 6 hours for existing certificates. It already ran a scan when it started up. Let's see what it found.
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/discovered-certificates | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/discovered-certificates | python3 -m json.tool
 ```
 
 **What you should see**: Any certificates that exist in the NGINX cert directory, including the ones you deployed in Steps 4-5. The discovery system extracts metadata (CN, SANs, issuer, expiry, fingerprint) from the PEM files.
@@ -539,8 +559,8 @@ curl -s -H "Authorization: Bearer test-key-2026" \
 Check the summary:
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/discovery-summary | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/discovery-summary | python3 -m json.tool
 ```
 
 This shows counts: how many are Unmanaged, Managed, and Dismissed.
@@ -554,7 +574,7 @@ In the dashboard: click **Discovery** in the sidebar to see the triage view.
 Force a renewal on the ACME certificate to see the full cycle happen again:
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates/mc-acme-test/renew \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/mc-acme-test/renew \
   -H "Authorization: Bearer test-key-2026" | python3 -m json.tool
 ```
 
@@ -581,7 +601,7 @@ The test environment enables EST with `CERTCTL_EST_ENABLED=true` and `CERTCTL_ES
 ### Step 10a: Check available CA certificates
 
 ```bash
-curl -sk http://localhost:8443/.well-known/est/cacerts \
+curl --cacert "$CA" -s https://localhost:8443/.well-known/est/cacerts \
   -H "Authorization: Bearer test-key-2026"
 ```
 
@@ -592,7 +612,7 @@ curl -sk http://localhost:8443/.well-known/est/cacerts \
 ### Step 10b: Check CSR attributes
 
 ```bash
-curl -sk http://localhost:8443/.well-known/est/csrattrs \
+curl --cacert "$CA" -s https://localhost:8443/.well-known/est/csrattrs \
   -H "Authorization: Bearer test-key-2026"
 ```
 
@@ -612,7 +632,7 @@ openssl req -new -newkey ec -pkeyopt ec_paramgen_curve:P-256 \
 EST_CSR=$(openssl req -in /tmp/est-test.csr -outform DER | base64 -w 0)
 
 # Submit to EST simpleenroll endpoint
-curl -sk -X POST http://localhost:8443/.well-known/est/simpleenroll \
+curl --cacert "$CA" -s -X POST https://localhost:8443/.well-known/est/simpleenroll \
   -H "Authorization: Bearer test-key-2026" \
   -H "Content-Type: application/pkcs10" \
   -d "$EST_CSR"
@@ -625,8 +645,8 @@ curl -sk -X POST http://localhost:8443/.well-known/est/simpleenroll \
 Decode and inspect the response (if you saved it to a variable):
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/audit-events | python3 -m json.tool | head -30
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/audit-events | python3 -m json.tool | head -30
 ```
 
 Check the audit trail — you should see an `est_enrollment` event with the CN `est-device.certctl.test`.
@@ -636,7 +656,7 @@ Check the audit trail — you should see an `est_enrollment` event with the CN `
 EST also supports re-enrollment (certificate renewal). The same CSR format works:
 
 ```bash
-curl -sk -X POST http://localhost:8443/.well-known/est/simplereenroll \
+curl --cacert "$CA" -s -X POST https://localhost:8443/.well-known/est/simplereenroll \
   -H "Authorization: Bearer test-key-2026" \
   -H "Content-Type: application/pkcs10" \
   -d "$EST_CSR"
@@ -655,7 +675,7 @@ S/MIME certificates are used for email signing and encryption — a different us
 ### Step 11a: Create an S/MIME certificate record
 
 ```bash
-curl -s -X POST http://localhost:8443/api/v1/certificates \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates \
   -H "Authorization: Bearer test-key-2026" \
   -H "Content-Type: application/json" \
   -d '{
@@ -683,7 +703,7 @@ Notice:
 docker exec certctl-test-postgres psql -U certctl -d certctl -c \
   "INSERT INTO certificate_target_mappings (certificate_id, target_id) VALUES ('mc-smime-test', 'target-test-nginx') ON CONFLICT DO NOTHING;"
 
-curl -s -X POST http://localhost:8443/api/v1/certificates/mc-smime-test/renew \
+curl --cacert "$CA" -s -X POST https://localhost:8443/api/v1/certificates/mc-smime-test/renew \
   -H "Authorization: Bearer test-key-2026" | python3 -m json.tool
 ```
 
@@ -692,15 +712,15 @@ curl -s -X POST http://localhost:8443/api/v1/certificates/mc-smime-test/renew \
 After the agent processes the job (30-60 seconds), check the certificate details:
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/certificates/mc-smime-test | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/certificates/mc-smime-test | python3 -m json.tool
 ```
 
 The certificate should show `"status": "active"`. To verify the EKU on the actual cert, you can export it:
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/certificates/mc-smime-test/export/pem | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/certificates/mc-smime-test/export/pem | python3 -m json.tool
 ```
 
 If you decode the certificate PEM, you should see:
@@ -765,16 +785,16 @@ If you have Go installed, you can build and test the CLI tool:
 go build -o certctl-cli ./cmd/cli
 
 # List certificates
-./certctl-cli --server http://localhost:8443 --api-key test-key-2026 list-certs
+./certctl-cli --server https://localhost:8443 --ca-bundle "$CA" --api-key test-key-2026 list-certs
 
 # Get a specific certificate
-./certctl-cli --server http://localhost:8443 --api-key test-key-2026 get-cert mc-acme-test
+./certctl-cli --server https://localhost:8443 --ca-bundle "$CA" --api-key test-key-2026 get-cert mc-acme-test
 
 # Check health
-./certctl-cli --server http://localhost:8443 --api-key test-key-2026 health
+./certctl-cli --server https://localhost:8443 --ca-bundle "$CA" --api-key test-key-2026 health
 
 # Get metrics (JSON format)
-./certctl-cli --server http://localhost:8443 --api-key test-key-2026 --format json metrics
+./certctl-cli --server https://localhost:8443 --ca-bundle "$CA" --api-key test-key-2026 --format json metrics
 ```
 
 ---
@@ -921,15 +941,15 @@ Look for error messages. Common ones:
 **Step 2**: Verify the agent is registered:
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  http://localhost:8443/api/v1/agents/agent-test-01 | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  https://localhost:8443/api/v1/agents/agent-test-01 | python3 -m json.tool
 ```
 
 **Step 3**: Check for pending jobs:
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  "http://localhost:8443/api/v1/jobs?status=Pending&status=AwaitingCSR" | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  "https://localhost:8443/api/v1/jobs?status=Pending&status=AwaitingCSR" | python3 -m json.tool
 ```
 
 If there are pending jobs but the agent isn't picking them up, check that the job's `agent_id` matches `agent-test-01`.
@@ -959,8 +979,8 @@ docker exec certctl-test-nginx nginx -s reload
 **Step 3**: If the files aren't there, the deployment job hasn't completed. Check the jobs:
 
 ```bash
-curl -s -H "Authorization: Bearer test-key-2026" \
-  "http://localhost:8443/api/v1/jobs?type=Deployment" | python3 -m json.tool
+curl --cacert "$CA" -s -H "Authorization: Bearer test-key-2026" \
+  "https://localhost:8443/api/v1/jobs?type=Deployment" | python3 -m json.tool
 ```
 
 Look at the job status. If it's "Running" and stuck, the server's job processor may have picked it up instead of the agent (this was a known bug — the fix skips deployment jobs with `agent_id` in the server's `ProcessPendingJobs`).
@@ -1005,7 +1025,7 @@ Change it to a different port, like:
       - "9443:8443"
 ```
 
-Then access the dashboard at http://localhost:9443 instead.
+Then access the dashboard at https://localhost:9443 instead.
 
 ### Starting completely fresh
 
@@ -1051,7 +1071,7 @@ docker compose -f docker-compose.test.yml up --build
 
 | What | Value |
 |---|---|
-| Dashboard URL | http://localhost:8443 |
+| Dashboard URL | https://localhost:8443 (use `--cacert ./test/certs/ca.crt`) |
 | API key | `test-key-2026` |
 | NGINX HTTP | http://localhost:8080 |
 | NGINX HTTPS | https://localhost:8444 |

docs/testing-guide.md

@@ -1297,66 +1297,59 @@ curl -s -H "$AUTH" "$SERVER/api/v1/audit?per_page=5" | jq '[.items[] | select(.a
 
 ### 5.3 CRL & OCSP
 
-**Test 5.3.1 — JSON CRL endpoint**
+> **M-006 note:** The non-standard JSON CRL (`GET /api/v1/crl`) and the authenticated DER CRL (`GET /api/v1/crl/{issuer_id}`) and OCSP (`GET /api/v1/ocsp/{issuer_id}/{serial}`) paths were removed. Revocation-status distribution now lives under the RFC 8615 well-known namespace (`/.well-known/pki/crl/{issuer_id}` and `/.well-known/pki/ocsp/{issuer_id}/{serial}`), served unauthenticated because relying parties (browsers, TLS clients, hardware appliances) do not have certctl API keys.
+
+**Test 5.3.1 — DER CRL endpoint (RFC 5280 §5, unauthenticated)**
 
 ```bash
-curl -s -w "\nHTTP %{http_code}\n" -H "$AUTH" "$SERVER/api/v1/crl" | jq '{total: .total, entries_count: (.entries | length)}'
+curl -s -D - -o /tmp/crl.der "$SERVER/.well-known/pki/crl/iss-local" | grep -i "content-type"
+openssl crl -inform der -in /tmp/crl.der -noout -text | head -40
 ```
 
-**What:** Fetches the JSON-formatted Certificate Revocation List.
-**Why:** CRL is how relying parties check if a certificate has been revoked. The JSON CRL is the machine-readable API view.
-**Expected:** HTTP 200. `total` > 0 (we revoked several certs above). Entries array contains serial numbers.
-**PASS if** HTTP 200 and `total` > 0. **FAIL** if total = 0 or 500.
+**What:** Fetches the DER-encoded X.509 CRL for the local issuer without presenting any API credentials.
+**Why:** Relying parties (browsers, TLS libraries, network appliances) don't have certctl API keys. RFC 5280 §5 defines only the DER wire format, and RFC 8615 defines `.well-known/pki/*` as the relying-party namespace. The Content-Type must be `application/pkix-crl` and `openssl crl -inform der` must parse the body.
+**Expected:** `Content-Type: application/pkix-crl`, `openssl` prints a valid CRL with the revoked serials we created above.
+**PASS if** Content-Type matches and `openssl crl` parses the body. **FAIL** if JSON/HTML, 401/403, or parse error.
 
 ---
 
-**Test 5.3.2 — DER CRL endpoint**
+**Test 5.3.2 — OCSP: good response for non-revoked cert (RFC 6960, unauthenticated)**
 
 ```bash
-curl -s -D - -o /dev/null -H "$AUTH" "$SERVER/api/v1/crl/iss-local" | grep -i "content-type"
+curl -s -w "\nHTTP %{http_code}\n" "$SERVER/.well-known/pki/ocsp/iss-local/mc-api-prod" -o /tmp/ocsp.der
+openssl ocsp -respin /tmp/ocsp.der -noverify -text 2>/dev/null | head -20
 ```
 
-**What:** Fetches the DER-encoded X.509 CRL for the local issuer.
-**Why:** Standard CRL consumers (browsers, TLS libraries) expect DER-encoded CRLs, not JSON. The Content-Type must be correct.
-**Expected:** `Content-Type: application/pkix-crl`
-**PASS if** Content-Type is `application/pkix-crl`. **FAIL** if JSON or other.
+**What:** Queries the OCSP responder for a non-revoked certificate without any Authorization header.
+**Why:** OCSP is the real-time alternative to CRL. RFC 6960 relying parties do not authenticate to the responder, so the endpoint must be public and return `Content-Type: application/ocsp-response`.
+**Expected:** HTTP 200 with OCSP response indicating "good" status when `openssl ocsp -respin` parses the body.
+**PASS if** HTTP 200 and cert status prints "good". **FAIL** if 401/403/500 or "revoked"/"unknown".
 
 ---
 
-**Test 5.3.3 — OCSP: good response for non-revoked cert**
+**Test 5.3.3 — OCSP: revoked response for revoked cert (unauthenticated)**
 
 ```bash
-curl -s -w "\nHTTP %{http_code}\n" -H "$AUTH" "$SERVER/api/v1/ocsp/iss-local/mc-api-prod"
-```
-
-**What:** Queries the OCSP responder for a non-revoked certificate.
-**Why:** OCSP is the real-time alternative to CRL. A "good" response means the cert is valid.
-**Expected:** HTTP 200 with OCSP response indicating "good" status.
-**PASS if** HTTP 200. **FAIL** if 500.
-
----
-
-**Test 5.3.4 — OCSP: revoked response for revoked cert**
-
-```bash
-curl -s -w "\nHTTP %{http_code}\n" -H "$AUTH" "$SERVER/api/v1/ocsp/iss-local/mc-test-full"
+curl -s -w "\nHTTP %{http_code}\n" "$SERVER/.well-known/pki/ocsp/iss-local/mc-test-full" -o /tmp/ocsp.der
+openssl ocsp -respin /tmp/ocsp.der -noverify -text 2>/dev/null | grep -i "cert status"
 ```
 
 **What:** Queries OCSP for a certificate we revoked earlier.
-**Why:** OCSP must return "revoked" status for revoked certs. If it still returns "good," relying parties will trust a compromised certificate.
+**Why:** OCSP must return "revoked" status for revoked certs. If it still returns "good," relying parties will trust a compromised certificate. Endpoint is unauthenticated per RFC 6960.
 **Expected:** HTTP 200 with OCSP response indicating "revoked" status.
-**PASS if** HTTP 200 and response indicates revoked. **FAIL** if response indicates "good".
+**PASS if** HTTP 200 and status prints "revoked". **FAIL** if status is "good".
 
 ---
 
-**Test 5.3.5 — OCSP: unknown serial**
+**Test 5.3.4 — OCSP: unknown serial (unauthenticated)**
 
 ```bash
-curl -s -w "\nHTTP %{http_code}\n" -H "$AUTH" "$SERVER/api/v1/ocsp/iss-local/nonexistent-serial"
+curl -s -w "\nHTTP %{http_code}\n" "$SERVER/.well-known/pki/ocsp/iss-local/nonexistent-serial" -o /tmp/ocsp.der
+openssl ocsp -respin /tmp/ocsp.der -noverify -text 2>/dev/null | grep -i "cert status"
 ```
 
 **What:** Queries OCSP for a serial number the server doesn't recognize.
-**Why:** OCSP must return "unknown" for serials it doesn't manage, not "good" (which would be a false positive).
+**Why:** OCSP must return "unknown" for serials it doesn't manage, not "good" (which would be a false positive). Endpoint is public per RFC 6960.
 **Expected:** HTTP 200 with OCSP "unknown" response, or HTTP 404.
 **PASS if** response is "unknown" or 404. **FAIL** if "good".
 
@@ -2102,9 +2095,10 @@ go test ./internal/connector/issuer/local/ -run "TestSubCA" -v
 **What:** In sub-CA mode, the DER CRL (Part 31.1) should be signed by the sub-CA key, not a self-signed root.
 
 ```bash
-# After starting in sub-CA mode and revoking a cert:
-curl -s -H "Authorization: Bearer $API_KEY" \
-  "http://localhost:8443/api/v1/crl/iss-local" -o /tmp/subca-crl.der
+# After starting in sub-CA mode and revoking a cert. The CRL is
+# published unauthenticated under the RFC 8615 well-known namespace
+# because relying parties don't carry certctl API keys.
+curl -s "http://localhost:8443/.well-known/pki/crl/iss-local" -o /tmp/subca-crl.der
 
 openssl crl -in /tmp/subca-crl.der -inform DER -noout -issuer
 ```
@@ -3706,23 +3700,24 @@ go test ./internal/service/ -run TestCSRRenewal -v
 
 **Why:** TLS clients need to verify that certificates haven't been revoked. Without OCSP/CRL, a compromised certificate remains trusted until it expires. The short-lived exemption avoids bloating the CRL with certs that expire before distribution.
 
-### 24.1: DER-Encoded CRL
+> **M-006 note:** CRL and OCSP are published at `GET /.well-known/pki/crl/{issuer_id}` (RFC 5280 §5, `application/pkix-crl`) and `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` (RFC 6960, `application/ocsp-response`). Per RFC 8615, `.well-known/pki/*` is the relying-party namespace, and the endpoints are served **unauthenticated** — browsers, TLS libraries, and network appliances do not have certctl API keys. The legacy `GET /api/v1/crl`, `GET /api/v1/crl/{issuer_id}`, and `GET /api/v1/ocsp/{issuer_id}/{serial}` routes were removed.
 
-**What:** `GET /api/v1/crl/{issuer_id}` returns a DER-encoded X.509 CRL signed by the issuing CA. Content-Type is `application/pkix-crl`. The CRL has 24-hour validity.
+### 24.1: DER-Encoded CRL (unauthenticated)
 
-**Why:** This is the standard CRL format that browsers, TLS libraries, and LDAP directories consume. The existing JSON CRL at `GET /api/v1/crl` is certctl-specific; the DER CRL is interoperable.
+**What:** `GET /.well-known/pki/crl/{issuer_id}` returns a DER-encoded X.509 CRL signed by the issuing CA. Content-Type is `application/pkix-crl`. The CRL has 24-hour validity.
+
+**Why:** This is the RFC 5280 §5 wire format that browsers, TLS libraries, and LDAP directories consume. It must be reachable without any Authorization header so that relying parties — who have no certctl credentials — can fetch it.
 
 ```bash
-# Request DER CRL for the local issuer
-curl -s -D - -H "Authorization: Bearer $API_KEY" \
-  "http://localhost:8443/api/v1/crl/iss-local" \
+# Request DER CRL for the local issuer. No Authorization header.
+curl -s -D - "http://localhost:8443/.well-known/pki/crl/iss-local" \
   -o /tmp/crl.der
 
 # Verify it's valid DER CRL with openssl
 openssl crl -in /tmp/crl.der -inform DER -noout -text
 ```
 
-**Expected:** 200 OK, Content-Type `application/pkix-crl`, Cache-Control `public, max-age=3600`.
+**Expected:** 200 OK, Content-Type `application/pkix-crl`.
 
 **PASS if:**
 - `openssl crl` parses the DER file successfully
@@ -3730,33 +3725,34 @@ openssl crl -in /tmp/crl.der -inform DER -noout -text
 - Validity period is present (thisUpdate / nextUpdate)
 - If any certs have been revoked, they appear in the revocation list with serial + reason
 
-**FAIL if:** Response is JSON (wrong endpoint), `openssl` rejects the DER format, or headers are wrong.
+**FAIL if:** Response is JSON (wrong endpoint), `openssl` rejects the DER format, headers are wrong, or the server returns 401/403 (auth must NOT be required).
 
 ### 24.2: DER CRL — Nonexistent Issuer
 
 ```bash
-curl -s -w "\n%{http_code}" -H "Authorization: Bearer $API_KEY" \
-  "http://localhost:8443/api/v1/crl/iss-nonexistent"
+curl -s -w "\n%{http_code}" \
+  "http://localhost:8443/.well-known/pki/crl/iss-nonexistent"
 ```
 
 **Expected:** 404 Not Found.
 **PASS if** status code is 404 and body contains "not found".
 
-### 24.3: OCSP Responder — Good Status
+### 24.3: OCSP Responder — Good Status (unauthenticated)
 
-**What:** `GET /api/v1/ocsp/{issuer_id}/{serial}` returns a signed OCSP response. For a non-revoked certificate, the status is "good".
+**What:** `GET /.well-known/pki/ocsp/{issuer_id}/{serial}` returns a signed OCSP response. For a non-revoked certificate, the status is "good".
 
-**Why:** OCSP is the real-time revocation check that TLS clients perform during the handshake. A "good" response tells the client the cert is still valid.
+**Why:** OCSP is the real-time RFC 6960 revocation check that TLS clients perform during the handshake. A "good" response tells the client the cert is still valid. Relying parties fetch this without API credentials.
 
 ```bash
-# First, get a certificate's serial number
+# First, get a certificate's serial number (this uses the authenticated API
+# because the operator has an API key — that is different from the relying
+# party fetching the OCSP response).
 SERIAL=$(curl -s -H "Authorization: Bearer $API_KEY" \
   "http://localhost:8443/api/v1/certificates/mc-api-prod" | jq -r '.latest_version.serial_number // empty')
 
-# If serial is available, query OCSP
+# Query OCSP without any Authorization header.
 if [ -n "$SERIAL" ]; then
-  curl -s -D - -H "Authorization: Bearer $API_KEY" \
-    "http://localhost:8443/api/v1/ocsp/iss-local/$SERIAL" \
+  curl -s -D - "http://localhost:8443/.well-known/pki/ocsp/iss-local/$SERIAL" \
     -o /tmp/ocsp.der
 
   # Parse OCSP response
@@ -3771,7 +3767,7 @@ fi
 - Certificate status is "good" for a non-revoked cert
 - Response is signed (producedAt timestamp present)
 
-**FAIL if:** Response is JSON, OCSP status is wrong, or `openssl` rejects the response.
+**FAIL if:** Response is JSON, OCSP status is wrong, `openssl` rejects the response, or the endpoint requires auth.
 
 ### 24.4: OCSP Responder — Revoked Status
 
@@ -3784,9 +3780,8 @@ curl -s -X POST -H "Authorization: Bearer $API_KEY" \
   -d '{"reason": "keyCompromise"}' \
   "http://localhost:8443/api/v1/certificates/$CERT_ID/revoke"
 
-# Then query OCSP
-curl -s -H "Authorization: Bearer $API_KEY" \
-  "http://localhost:8443/api/v1/ocsp/iss-local/$SERIAL" \
+# Then query OCSP — unauthenticated.
+curl -s "http://localhost:8443/.well-known/pki/ocsp/iss-local/$SERIAL" \
   -o /tmp/ocsp-revoked.der
 
 openssl ocsp -respin /tmp/ocsp-revoked.der -text -noverify
@@ -3801,8 +3796,7 @@ openssl ocsp -respin /tmp/ocsp-revoked.der -text -noverify
 **What:** Querying a serial number that doesn't exist in the inventory returns an "unknown" OCSP status (not an error — this is the correct OCSP behavior per RFC 6960).
 
 ```bash
-curl -s -H "Authorization: Bearer $API_KEY" \
-  "http://localhost:8443/api/v1/ocsp/iss-local/DEADBEEF" \
+curl -s "http://localhost:8443/.well-known/pki/ocsp/iss-local/DEADBEEF" \
   -o /tmp/ocsp-unknown.der
 
 openssl ocsp -respin /tmp/ocsp-unknown.der -text -noverify
@@ -3820,9 +3814,8 @@ openssl ocsp -respin /tmp/ocsp-unknown.der -text -noverify
 To test: revoke a cert that was issued under the `prof-short-lived` profile, then check the DER CRL. The revoked short-lived cert should NOT appear.
 
 ```bash
-# After revoking a short-lived cert (serial SHORT_SERIAL):
-curl -s -H "Authorization: Bearer $API_KEY" \
-  "http://localhost:8443/api/v1/crl/iss-local" -o /tmp/crl.der
+# After revoking a short-lived cert (serial SHORT_SERIAL). No auth needed.
+curl -s "http://localhost:8443/.well-known/pki/crl/iss-local" -o /tmp/crl.der
 
 openssl crl -in /tmp/crl.der -inform DER -text | grep -i "$SHORT_SERIAL"
 ```
@@ -5009,10 +5002,10 @@ curl -s -w "HTTP %{http_code}\n" -X DELETE -H "$AUTH" "$SERVER/api/v1/audit/$EVE
 
 > **Tip:** Open a second terminal with `docker compose logs -f certctl-server` to watch scheduler log output in real time.
 
-**Test 20.1.1 — Scheduler startup: all 7 loops registered**
+**Test 20.1.1 — Scheduler startup: all 12 loops registered**
 
 ```bash
-docker compose logs certctl-server 2>&1 | grep -i "scheduler\|renewal check\|job processor\|health check\|notification\|short-lived\|network scan" | head -20
+docker compose logs certctl-server 2>&1 | grep -i "scheduler\|renewal check\|job processor\|job retry\|job timeout\|health check\|notification\|notification retry\|short-lived\|network scan\|digest\|endpoint health\|cloud discovery" | head -30
 ```
 
 **What:** Checks server startup logs for scheduler loop registration.
@@ -6594,6 +6587,419 @@ helm template certctl deploy/helm/certctl/ --set server.replicaCount=3 | grep 'r
 
 ---
 
+## Part 55: Agent Soft-Retirement (I-004)
+
+**What this validates:** The full `DELETE /api/v1/agents/{id}` soft-retirement contract — seven HTTP status codes (200/204/400/403/404/405/409/500), opt-in retired-agent listing, sentinel refusal, `410 Gone` heartbeat response, and the force-cascade escape hatch.
+
+**Why it matters:** Before I-004, there was no retirement surface at all — `DELETE` did not exist and agents could only be removed via raw SQL against the `agents` table. Worse, the schema declared `deployment_targets.agent_id ON DELETE CASCADE`, so any such manual delete silently cascaded through four tables with zero audit trail. This part pins the replacement contract (soft-delete + preflight + force-cascade + sentinel guard + heartbeat 410) so regressions show up here first rather than as orphaned targets in production.
+
+### 55.1 Migration 000015 Applied
+
+```bash
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT column_name FROM information_schema.columns WHERE table_name='agents' AND column_name IN ('retired_at','retired_reason') ORDER BY column_name;"
+```
+
+**What:** Confirms migration 000015 added the archival columns to the `agents` table.
+**PASS if** both `retired_at` and `retired_reason` rows are returned. **FAIL** if either is missing (migration did not apply).
+
+---
+
+### 55.2 FK Constraint Flipped to RESTRICT
+
+```bash
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT confdeltype FROM pg_constraint WHERE conname='deployment_targets_agent_id_fkey';"
+```
+
+**What:** `confdeltype` is PostgreSQL's one-character code for the FK delete action: `r` = RESTRICT, `c` = CASCADE.
+**PASS if** the value is `r`. **FAIL** if it is still `c` — that means migration 000015's FK flip did not run, and a hard `DELETE` against an agent row would silently cascade.
+
+---
+
+### 55.3 Clean Retire — 200
+
+```bash
+curl -sS -X DELETE "http://localhost:8443/api/v1/agents/ag-test-clean" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Retires an agent that has no active deployment targets, no deployed certificates, and no pending jobs.
+**PASS if** status code is `200` and response body includes `"retired_at":"<ISO8601>"`, `"cascade":false`, and zero-valued counts.
+
+---
+
+### 55.4 Idempotent Re-Retire — 204
+
+```bash
+curl -sS -X DELETE "http://localhost:8443/api/v1/agents/ag-test-clean" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Retires an agent that is already retired.
+**PASS if** status code is `204` and response body is completely empty (not even a trailing newline from the handler). The 200-shape must NOT be emitted — this is the terminal no-op.
+
+---
+
+### 55.5 Blocked by Dependencies — 409
+
+```bash
+curl -sS -X DELETE "http://localhost:8443/api/v1/agents/ag-with-deps" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Attempts to retire an agent that still has active targets/certificates/jobs.
+**PASS if** status code is `409` and response body is the three-key `BlockedByDependenciesResponse` shape: `{"error":"blocked_by_dependencies", "message": "...", "counts": {"active_targets": N, "active_certificates": N, "pending_jobs": N}}`. Must NOT be the generic `ErrorResponse` shape — downstream dashboards parse the `counts` key.
+
+---
+
+### 55.6 Force Cascade — 200
+
+```bash
+curl -sS -X DELETE "http://localhost:8443/api/v1/agents/ag-with-deps?force=true&reason=decommissioning+rack-7" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Uses the force escape hatch to cascade-retire the dependencies.
+**PASS if** status code is `200`, response includes `"cascade":true` with the pre-cascade counts, and the subsequent `GET /api/v1/audit-events?action=agent_retirement_cascaded` shows the event with the supplied `reason` and actor.
+
+---
+
+### 55.7 Force Without Reason — 400
+
+```bash
+curl -sS -X DELETE "http://localhost:8443/api/v1/agents/ag-other?force=true" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Verifies the `ErrForceReasonRequired` guard — `force=true` without `reason` must be rejected before any state mutation.
+**PASS if** status code is `400` and no agent/target/job rows were modified.
+
+---
+
+### 55.8 Sentinel Refusal — 403
+
+```bash
+for id in server-scanner cloud-aws-sm cloud-azure-kv cloud-gcp-sm; do
+  echo "=== $id ==="
+  curl -sS -X DELETE "http://localhost:8443/api/v1/agents/${id}?force=true&reason=attempt" \
+    -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+    -w "\nHTTP %{http_code}\n"
+done
+```
+
+**What:** Verifies all four sentinel agents refuse retirement even with `force=true`.
+**PASS if** every request returns `403` and the response body's `error` value is `sentinel_agent` (or the equivalent `ErrAgentIsSentinel` mapping). **FAIL** if any sentinel accepts the request — retiring one silently orphans the network scanner or one of the three cloud secret-manager discovery sources.
+
+---
+
+### 55.9 Unknown ID — 404
+
+```bash
+curl -sS -X DELETE "http://localhost:8443/api/v1/agents/ag-does-not-exist" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Verifies `ErrAgentNotFound` maps to 404 (not 500). Ordering matters — the not-found check must come after the sentinel check so a typo'd sentinel ID still returns 403, not 404.
+**PASS if** status code is `404`.
+
+---
+
+### 55.10 Heartbeat on Retired Agent — 410
+
+```bash
+curl -sS -X POST "http://localhost:8443/api/v1/agents/ag-test-clean/heartbeat" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -H "Content-Type: application/json" \
+  -d '{"os":"linux","architecture":"amd64","hostname":"test","ip_address":"10.0.0.1","version":"2.1.0"}' \
+  -w "\nHTTP %{http_code}\n"
+```
+
+**What:** Retired agents get `410 Gone` — the canonical "resource is permanently gone, stop retrying" signal — so `cmd/agent` detects it and exits cleanly.
+**PASS if** status code is `410`. **FAIL** if it is `404` (wrong ordering — retired-check must run before not-found) or `200` (retired filter missing entirely — agent would keep phoning home forever).
+
+---
+
+### 55.11 Default List Excludes Retired
+
+```bash
+curl -sS "http://localhost:8443/api/v1/agents" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  | jq -r '.data[] | select(.id=="ag-test-clean") | .id'
+```
+
+**What:** Verifies the default `/agents` listing filters retired rows via `AgentRepository.ListActive`.
+**PASS if** output is empty (the retired agent does NOT appear). **FAIL** if `ag-test-clean` shows up — default listings must not expose retired rows.
+
+---
+
+### 55.12 Retired Agents Opt-In View
+
+```bash
+curl -sS "http://localhost:8443/api/v1/agents/retired" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  | jq -r '.data[] | select(.id=="ag-test-clean") | {id, retired_at, retired_reason}'
+```
+
+**What:** Verifies the opt-in retired-agents view returns the row with `retired_at` and `retired_reason` populated. Go 1.22 ServeMux literal-beats-pattern-var precedence routes `/agents/retired` to this handler rather than `/agents/{id}`.
+**PASS if** the row appears with non-null `retired_at`. **FAIL** if the row is missing (listing broken) or `retired_at` is null (serialization broken).
+
+---
+
+### 55.13 Dashboard Stats Counter Excludes Retired
+
+```bash
+curl -sS "http://localhost:8443/api/v1/stats/summary" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  | jq -r '.total_agents'
+```
+
+**What:** Stats dashboard uses `ListActive`, not `List` — retired agents must not inflate the count.
+**PASS if** the counter reflects only non-retired rows (verify against `SELECT count(*) FROM agents WHERE retired_at IS NULL`).
+
+---
+
+### 55.14 CLI Retire Subcommand
+
+```bash
+certctl-cli agents retire ag-cli-test --force --reason "smoke test"
+certctl-cli agents list --retired | grep ag-cli-test
+```
+
+**What:** Verifies the CLI `agents retire` subcommand forwards `--force` and `--reason` via `DeleteWithQuery` and the `agents list --retired` flag hits `/agents/retired` rather than the default listing.
+**PASS if** the first command succeeds and the second shows the agent in the retired view.
+
+---
+
+### 55.15 MCP Retire Tool Schema
+
+```bash
+go test ./internal/mcp/ -run TestRetireAgent -v -count=1
+```
+
+**What:** Verifies the `certctl_retire_agent` MCP tool's input schema accepts `id`, `force`, and `reason`, and that the tool actually propagates `force`/`reason` into the outbound DELETE query string (not the body).
+**PASS if** exit code 0.
+
+---
+
+### 55.16 HEAD-State OpenAPI Contract
+
+```bash
+npx --yes @redocly/cli lint api/openapi.yaml \
+  --config '{"rules":{"operation-4xx-response":"error","no-invalid-media-type-examples":"error"}}'
+python3 -c "
+import yaml
+spec = yaml.safe_load(open('api/openapi.yaml'))
+del_op = spec['paths']['/api/v1/agents/{id}']['delete']
+assert set(del_op['responses'].keys()) == {'200','204','400','403','404','405','409','500'}, del_op['responses'].keys()
+hb = spec['paths']['/api/v1/agents/{id}/heartbeat']['post']
+assert '410' in hb['responses'], hb['responses'].keys()
+assert spec['paths']['/api/v1/agents/retired']['get']['operationId'] == 'listRetiredAgents'
+print('OpenAPI I-004 contract: OK')
+"
+```
+
+**What:** Two-part check. Redocly lint confirms the spec is structurally valid; the Python assertions pin the seven DELETE status codes, the 410 heartbeat response, and the retired-agents operationId.
+**PASS if** redocly prints no errors and the Python script prints `OpenAPI I-004 contract: OK`.
+
+---
+
+## Part 56: Notification Retry & Dead-Letter Queue (I-005)
+
+**What this validates:** The full retry lifecycle for `notification_events` rows — transient notifier failures are re-armed with exponential backoff (`2^retry_count` minutes capped at 1h, 5-attempt budget), rows that exhaust the budget land in the terminal `dead` status, the dead-letter depth is surfaced both on the dashboard and via a Prometheus counter, and operators can requeue dead rows once the underlying outage is resolved.
+
+**Why it matters:** Before I-005, a failed notification was a silent drop. `internal/service/notification.go` flipped `status` to `failed` and never came back to it, because `ProcessPendingNotifications` only lists rows whose `status='pending'`. A 5xx from Slack, a 30-second SMTP stall, or a misrouted webhook URL could each lose a critical alert (cert expiry, CA compromise, approval-rejected) with no trace beyond a single log line. Part 56 pins the replacement contract (retry loop + DLQ + dashboard surface + Prometheus metric + operator requeue) so regressions show up here rather than as a post-incident "why didn't we get paged?" review.
+
+### 56.1 Migration 000016 Columns Applied
+
+```bash
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT column_name FROM information_schema.columns WHERE table_name='notification_events' AND column_name IN ('retry_count','next_retry_at','last_error') ORDER BY column_name;"
+```
+
+**What:** Confirms migration 000016 added the retry bookkeeping columns to `notification_events`.
+**PASS if** all three rows (`last_error`, `next_retry_at`, `retry_count`) are returned. **FAIL** if any is missing — the migration did not apply and the retry loop will error on every tick.
+
+---
+
+### 56.2 Partial Retry-Sweep Index Present
+
+```bash
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT indexdef FROM pg_indexes WHERE tablename='notification_events' AND indexname='idx_notification_events_retry_sweep';"
+```
+
+**What:** Confirms the partial index `idx_notification_events_retry_sweep ON notification_events(next_retry_at) WHERE status = 'failed' AND next_retry_at IS NOT NULL` exists and has the expected predicate.
+**PASS if** the returned `indexdef` includes `WHERE ((status = 'failed'::text) AND (next_retry_at IS NOT NULL))`. **FAIL** if the index is missing or unpartialed — the retry sweep will scan the full notification history instead of the small retry-eligible slice.
+
+---
+
+### 56.3 Failed Notification Retries On Next Tick
+
+```bash
+# Seed a failed notification with next_retry_at in the past
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "UPDATE notification_events SET status='failed', retry_count=0, next_retry_at=NOW() - INTERVAL '1 minute', last_error='transient SMTP timeout' WHERE id='notif-demo-1';"
+
+# Wait for the retry loop to sweep (default CERTCTL_NOTIFICATION_RETRY_INTERVAL=2m)
+sleep 130
+
+# Observe the post-sweep state
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT id, status, retry_count, next_retry_at IS NOT NULL AS has_next_retry FROM notification_events WHERE id='notif-demo-1';"
+```
+
+**What:** Exercises the retry loop's failure path. The seeded row is re-dispatched through the notifier registry; in the demo environment the notifier does not exist for `email` so the sweep either delivers (`status='sent'`) or records a failed attempt (`retry_count=1`, `next_retry_at` re-armed).
+**PASS if** either `status='sent'` (delivered on retry) or the row is still `failed` with `retry_count >= 1` and `has_next_retry=t`. **FAIL** if the row is still `failed` with `retry_count=0` and `next_retry_at` in the past — the retry loop is not actually running.
+
+---
+
+### 56.4 Exhausted Notification Transitions To Dead
+
+```bash
+# Seed a row one failure shy of exhaustion — retry_count=4 means the next
+# tick's failure is the 5th attempt (notifRetryMaxAttempts-1 check at
+# internal/service/notification.go:531).
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "UPDATE notification_events SET status='failed', retry_count=4, next_retry_at=NOW() - INTERVAL '1 minute', last_error='persistent outage', channel='channel-that-does-not-exist' WHERE id='notif-demo-2';"
+
+sleep 130
+
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT id, status, retry_count, last_error FROM notification_events WHERE id='notif-demo-2';"
+```
+
+**What:** The row at `retry_count=4` enters the sweep, the notifier lookup fails (channel unknown), the exhaustion branch fires, and `MarkAsDead` flips the row. Note: the "notifier unknown" branch at notification.go:494-503 promotes to `sent` for demo parity, so for a strict DLQ assertion seed a row whose channel is a known registered notifier that will reject delivery — alternatively run against the integration test fixture where the retry-exhaustion path is deterministic.
+**PASS if** `status='dead'` and `last_error` reflects the send failure. **FAIL** if the row is still `failed` with `retry_count >= 5` — the exhaustion branch did not fire and the row will retry forever.
+
+---
+
+### 56.5 Dead Row Has Null next_retry_at
+
+```bash
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT COUNT(*) FROM notification_events WHERE status='dead' AND next_retry_at IS NOT NULL;"
+```
+
+**What:** `MarkAsDead` must clear `next_retry_at` so the partial retry-sweep index stops matching the row. If this invariant breaks, a dead row keeps appearing in `ListRetryEligible` and the exhaustion branch fires on every sweep.
+**PASS if** the count is `0`. **FAIL** if any dead rows still carry a non-null `next_retry_at` — the DLQ is leaky and the row will re-enter the retry rotation on the next tick.
+
+---
+
+### 56.6 DashboardSummary Populates NotificationsDead
+
+```bash
+# Seed a dead row so the count is observable
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "UPDATE notification_events SET status='dead', next_retry_at=NULL, last_error='demo DLQ fixture' WHERE id='notif-demo-3';"
+
+curl -sS "http://localhost:8443/api/v1/stats/summary" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  | python3 -c "import sys,json; s=json.load(sys.stdin); assert 'notifications_dead' in s, 'missing notifications_dead field'; assert s['notifications_dead'] >= 1, s['notifications_dead']; print('notifications_dead:', s['notifications_dead'])"
+```
+
+**What:** Confirms `DashboardSummary.NotificationsDead` (`internal/service/stats.go:66`) is populated by `notifRepo.CountByStatus(ctx, "dead")` (stats.go:137-142) and surfaced in the dashboard summary JSON.
+**PASS if** the field is present and reflects at least the seeded dead row. **FAIL** if the field is missing (`SetNotifRepo` was not called on StatsService) or stuck at zero despite seeded dead rows (repository `CountByStatus` is broken).
+
+---
+
+### 56.7 Prometheus Counter Emits certctl_notification_dead_total
+
+```bash
+curl -sS "http://localhost:8443/api/v1/metrics/prometheus" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  | grep -E '^# (HELP|TYPE) certctl_notification_dead_total|^certctl_notification_dead_total '
+```
+
+**What:** The Prometheus endpoint (`internal/api/handler/metrics.go:217-219`) emits three lines: `# HELP certctl_notification_dead_total Number of notifications in the dead-letter queue.`, `# TYPE certctl_notification_dead_total counter`, and a bare `certctl_notification_dead_total <value>` value line. Operator alert thresholds per the I-005 spec: `> 0` warning, `> 10` critical.
+**PASS if** all three lines are present and the value is `>= 1` when dead rows exist. **FAIL** if any of the three lines is missing — the metric name is misspelled, the `# TYPE` is wrong, or `DashboardSummary.NotificationsDead` is not wired into the metrics handler.
+
+---
+
+### 56.8 Requeue Resets Retry Bookkeeping
+
+```bash
+# Confirm the row is in 'dead' with the full retry history
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT id, status, retry_count, next_retry_at, last_error FROM notification_events WHERE id='notif-demo-3';"
+
+# Requeue via the operator endpoint
+curl -sS -X POST "http://localhost:8443/api/v1/notifications/notif-demo-3/requeue" \
+  -H "Authorization: Bearer ${CERTCTL_API_KEY}" \
+  -w "\nHTTP %{http_code}\n"
+
+# Confirm the atomic reset
+docker compose -f deploy/docker-compose.yml exec postgres \
+  psql -U certctl -d certctl -c \
+  "SELECT id, status, retry_count, next_retry_at, last_error FROM notification_events WHERE id='notif-demo-3';"
+```
+
+**What:** Exercises the operator-driven escape hatch (`POST /api/v1/notifications/{id}/requeue`). The repository's `Requeue` must atomically flip `status → pending`, reset `retry_count → 0`, clear `next_retry_at → NULL`, and clear `last_error → NULL` — see `internal/service/notification.go:571-576` and the pinning test at `notification_handler_test.go:307-347`.
+**PASS if** HTTP `200` with JSON body `{"status":"requeued"}` AND the post-requeue row has `status='pending'`, `retry_count=0`, `next_retry_at IS NULL`, `last_error IS NULL`. **FAIL** if any of the four fields is not reset — `ProcessPendingNotifications` will not treat this as a fresh attempt and the audit trail will be ambiguous.
+
+---
+
+### 56.9 GUI Dead Letter Tab Threads ?status=dead
+
+```bash
+cd web
+npx vitest run src/pages/NotificationsPage.test.tsx -t 'Dead letter tab fetches notifications with status=dead'
+```
+
+**What:** The two-tab toolbar on `/notifications` routes the "Dead letter" tab's query through `getNotifications({ status: 'dead', per_page: '100' })`. This test verifies the React Query's `queryKey: ['notifications', activeTab]` (`NotificationsPage.tsx:31`) actually translates the tab click into the server-side filter — not client-side filtering of the full inbox.
+**PASS if** the Vitest assertion at `NotificationsPage.test.tsx:104-128` passes. **FAIL** if the Dead letter tab is merely a client-side filter on the `all` response — the DLQ-only code path (`NotificationRepository.ListByStatus`) is not exercised, which matters for pagination correctness once the inbox grows beyond 100 rows.
+
+---
+
+### 56.10 Requeue Button MutationFn Wrapper
+
+```bash
+cd web
+npx vitest run src/pages/NotificationsPage.test.tsx -t 'clicking Requeue invokes requeueNotification'
+```
+
+**What:** `react-query` v5's `mutate(id)` passes a second positional argument (the mutation context object) to the `mutationFn`. If `mutationFn: requeueNotification` is used directly, the API client receives `(id, { client })` — an extra argument that the strict-match `toHaveBeenCalledWith('notif-dead-001')` assertion at `NotificationsPage.test.tsx:181` rejects. The fix is an explicit single-arg arrow: `mutationFn: (id: string) => requeueNotification(id)` at `NotificationsPage.tsx:64`.
+**PASS if** the Vitest assertion passes (the API client was called with exactly one argument). **FAIL** if the wrapper is inadvertently removed — silent success in runtime, loud failure in this contract.
+
+---
+
+### 56.11 HEAD-State OpenAPI Contract
+
+```bash
+npx --yes @redocly/cli lint api/openapi.yaml \
+  --config '{"rules":{"operation-4xx-response":"error","no-invalid-media-type-examples":"error"}}'
+python3 -c "
+import yaml
+spec = yaml.safe_load(open('api/openapi.yaml'))
+post = spec['paths']['/api/v1/notifications/{id}/requeue']['post']
+assert post['operationId'] == 'requeueNotification', post['operationId']
+assert set(post['responses'].keys()) >= {'200','400','404','405','500'}, post['responses'].keys()
+print('OpenAPI I-005 contract: OK')
+"
+```
+
+**What:** Two-part check. Redocly lint confirms the spec is structurally valid; the Python assertions pin the requeue endpoint's `operationId` and the five minimum response codes (200/400/404/405/500).
+**PASS if** redocly prints no errors and the Python script prints `OpenAPI I-005 contract: OK`. **FAIL** if the `operationId` changed or any of the five responses is missing — downstream MCP/CLI clients rely on the contract.
+
+---
+
 ## Release Sign-Off
 
 All tests below must pass before tagging v2.1.0. Each row is one individual test from the guide above. The **Method** column indicates whether `qa-smoke-test.sh` covers the test automatically (**Auto**) or requires hands-on verification (**Manual**).
@@ -6934,7 +7340,7 @@ These must be green before starting manual QA:
 
 | Test | Description | Method | Pass? | Date | Notes |
 |------|-------------|--------|-------|------|-------|
-| 20.1.1 | Scheduler startup: all 7 loops registered | Manual | ☐ |  |  |
+| 20.1.1 | Scheduler startup: all 12 loops registered | Manual | ☐ |  |  |
 | 20.1.2 | Job processor loop fires (30s interval) | Manual | ☐ |  |  |
 | 20.1.3 | Agent health check marks offline (2m interval) | Manual | ☐ |  |  |
 | 20.1.4 | Notification processor fires (1m interval) | Manual | ☐ |  |  |
@@ -7595,10 +8001,10 @@ These must be green before starting manual QA:
 | Category | Count |
 |----------|-------|
 | ☑ Auto (passed in `qa-smoke-test.sh`) | 144 |
-| ☐ Auto (not yet run) | 129 |
+| ☐ Auto (not yet run) | 136 |
 | — Skipped (preconditions not met in demo) | 5 |
-| ☐ Manual (requires hands-on verification) | 282 |
-| **Total** | **560** |
+| ☐ Manual (requires hands-on verification) | 286 |
+| **Total** | **571** |
 
 **Automated tests must also be green.** CI passing is necessary but not sufficient — this manual QA catches integration issues that isolated unit tests miss.
 

docs/tls.md

@@ -0,0 +1,183 @@
+# TLS on the Control Plane
+
+certctl's control plane is HTTPS-only as of v2.2. There is no plaintext `http://` listener, no `auto` mode, no dual-listener bridge, no TLS 1.2 escape hatch. The server refuses to start without a cert+key pair, the agent/CLI/MCP clients reject `http://` URLs at startup, and the Helm chart refuses to render without either an operator-supplied Secret or a cert-manager Certificate CR.
+
+This doc covers four cert provisioning patterns, SIGHUP-based cert rotation, and the client-side CA-trust configuration agents and the CLI need to talk to the server. If you are upgrading from a pre-HTTPS release and want the step-by-step cutover procedure, read [`upgrade-to-tls.md`](upgrade-to-tls.md) first and come back here for reference.
+
+## What you get
+
+The server binds TLS 1.3 only with an explicit curve preference of `[X25519, P-256]`. TLS 1.3 cipher suites are non-negotiable (all three mandatory suites — AES-128-GCM-SHA256, AES-256-GCM-SHA384, CHACHA20-POLY1305-SHA256 — are always offered), so there is no `CipherSuites` knob to misconfigure. No TLS 1.2 fallback is available.
+
+Two env vars are required on the server:
+
+- `CERTCTL_SERVER_TLS_CERT_PATH` — filesystem path to the PEM-encoded server certificate
+- `CERTCTL_SERVER_TLS_KEY_PATH` — filesystem path to the PEM-encoded private key that signs the cert
+
+Both paths are read during a fail-loud preflight in `cmd/server/main.go` (see `preflightServerTLS` in `cmd/server/tls.go`). If either is unset, unreadable, or the cert+key pair does not round-trip through `tls.LoadX509KeyPair`, the process refuses to start and emits a diagnostic pointing back at this doc. The rationale lives in §3 of the HTTPS-Everywhere milestone: a cert-lifecycle product should not silently bind plaintext.
+
+## Pattern 1 — Self-signed bootstrap for docker-compose demos
+
+This is the default for the `deploy/docker-compose.yml` stack. It exists so `docker compose up -d --build` just works on a laptop without the operator standing up a CA first. It is not appropriate for any non-demo environment.
+
+An init container named `certctl-tls-init` runs once before the server starts. It uses the `alpine/openssl` image and generates an ECDSA-P256 self-signed cert (SHA-256 signature):
+
+```
+openssl req -x509 -newkey ec \
+  -pkeyopt ec_paramgen_curve:P-256 \
+  -nodes \
+  -keyout /etc/certctl/tls/server.key \
+  -out   /etc/certctl/tls/server.crt \
+  -days 3650 \
+  -subj "/CN=certctl-server" \
+  -addext "subjectAltName=DNS:certctl-server,DNS:localhost,IP:127.0.0.1,IP:::1"
+```
+
+**Why ECDSA-P256 and not ed25519.** The pre-v2.0.48 demo bootstrap used ed25519 (small keys, fast signatures). Apple's TLS stack — Safari Network Framework and the macOS-bundled LibreSSL 3.3.6 `/usr/bin/curl` — does not advertise ed25519 in the ClientHello `signature_algorithms` extension for server certs, so an ed25519 server cert was rejected at handshake with `tls: peer doesn't support any of the certificate's signature algorithms` on the server side (and the generic TLS handshake error on the client side). Homebrew OpenSSL 3.x, Chrome, Firefox, and Linux curl all accepted ed25519 — Apple was the outlier. ECDSA-P256 with SHA-256 is universally supported, so the demo bootstrap uses it by default. To pick up the new algorithm on an existing demo install, tear the volume down and rebuild: `docker compose -f deploy/docker-compose.yml down -v && docker compose -f deploy/docker-compose.yml up -d --build`. **Helm and operator-supplied-Secret users (Patterns 2 and 3) are unaffected** — they bring their own cert, and `cmd/server/tls.go` is algorithm-agnostic (TLS 1.3 with curve preference `[X25519, P-256]` for key exchange — no constraint on the server cert's signature algorithm).
+
+The cert, its matching key, and a copy of the cert published as `ca.crt` land in a named volume (`certs`) mounted at `/etc/certctl/tls/` in the server container (read-only) and the agent container (read-only). The bootstrap is idempotent — if `server.crt`, `server.key`, and `ca.crt` are already present on the volume, the init container logs `TLS cert already present at …` and exits cleanly.
+
+Single-cert design. CN is `certctl-server` to match the Docker-network hostname. The SAN list is `[certctl-server, localhost, 127.0.0.1, ::1]`, which covers both container-internal agent→server traffic and operator browser/curl access to `https://localhost:8443`. There is no separate intermediate/root chain — the server cert and the CA bundle are the same PEM. This is the whole point of a demo bootstrap.
+
+To force regeneration (rotate the demo cert), tear the volume down: `docker compose down -v`. The next `up` re-runs the init container.
+
+The server's Docker healthcheck and the agent both verify against `/etc/certctl/tls/ca.crt`; no `-k` / `InsecureSkipVerify` anywhere in the default stack.
+
+## Pattern 2 — Operator-supplied `kubernetes.io/tls` Secret (Helm)
+
+This is the default path for Helm installs. The operator provisions a Secret of type `kubernetes.io/tls` holding `tls.crt` + `tls.key` (and optionally `ca.crt` for mounting a CA bundle to clients in the same cluster) from whatever source they already trust — their internal CA, a manually-issued cert, step-ca, AWS ACM PCA exported to PEM, or the output of the self-signed bootstrap pattern above copied into a cluster Secret.
+
+```
+kubectl create secret tls certctl-server-tls \
+  --cert=server.crt \
+  --key=server.key \
+  --namespace certctl
+```
+
+Then:
+
+```
+helm install certctl deploy/helm/certctl \
+  --namespace certctl \
+  --set server.tls.existingSecret=certctl-server-tls
+```
+
+The Secret is mounted read-only at `/etc/certctl/tls/` in the server pod. The `CERTCTL_SERVER_TLS_CERT_PATH` and `CERTCTL_SERVER_TLS_KEY_PATH` env vars are wired to `tls.crt` and `tls.key` keys inside that mount. If `ca.crt` is absent from the Secret, clients that need a CA bundle should use `tls.crt` as the bundle (self-signed case) or mount a separate ConfigMap with the root chain (operator-CA case).
+
+If the operator sets neither `server.tls.existingSecret` nor `server.tls.certManager.enabled=true`, `helm template` / `helm install` fails at render-time with a diagnostic pointing at this doc. The guard is implemented in `deploy/helm/certctl/templates/_helpers.tpl` under the `certctl.tls.required` helper. This is deliberate: the HTTPS-only server would crash-loop on an empty path, so we fail earlier at Helm-render time.
+
+## Pattern 3 — cert-manager `Certificate` CR (Helm, opt-in)
+
+For clusters that already run cert-manager, the chart can provision a `Certificate` CR that writes into the Secret the server pod reads from. This is opt-in — the default is `server.tls.certManager.enabled: false` — because not every cluster has cert-manager installed, and we refuse to ship a chart that silently depends on an external controller.
+
+```
+helm install certctl deploy/helm/certctl \
+  --namespace certctl \
+  --set server.tls.certManager.enabled=true \
+  --set server.tls.certManager.issuerRef.name=my-cluster-issuer \
+  --set server.tls.certManager.issuerRef.kind=ClusterIssuer
+```
+
+The rendered `Certificate` (see `deploy/helm/certctl/templates/server-certificate.yaml`) writes `tls.crt` + `tls.key` + `ca.crt` into the Secret named by `server.tls.certManager.secretName` (defaults to `<fullname>-tls`). The server pod reads from that same Secret; the agent DaemonSet mounts the same Secret as its CA bundle source.
+
+cert-manager handles rotation. certctl-server handles in-place reload — see the SIGHUP section below.
+
+The chart enforces that if `server.tls.certManager.enabled=true`, `server.tls.certManager.issuerRef.name` must also be set. An empty `issuerRef.name` makes `helm template` fail with a diagnostic naming the missing flag.
+
+## Pattern 4 — Manually-issued from an internal CA
+
+For operators running neither Helm nor docker-compose (bare-metal / custom orchestration), the server just needs two files on disk pointed at by `CERTCTL_SERVER_TLS_CERT_PATH` and `CERTCTL_SERVER_TLS_KEY_PATH`. Issue the cert from your internal CA with:
+
+- CN matching the hostname your agents and operators use to dial the server (e.g., `certctl.prod.example.com`)
+- SAN list covering every hostname and IP that appears in `CERTCTL_SERVER_URL` values across your agent fleet
+- Key usage: digital signature + key encipherment
+- Extended key usage: server auth
+
+Store the key with mode `0600` and owner matching the UID the server runs as (`1000` in our shipped Dockerfile). The server process reads both files during `preflightServerTLS` at startup and again on every SIGHUP.
+
+The full CA chain that signed the server cert should be distributed to agents, CLI operators, and MCP clients as their `CERTCTL_SERVER_CA_BUNDLE_PATH` — see the client section below.
+
+## SIGHUP cert rotation
+
+The server wraps its cert+key pair in a `*certHolder` (see `cmd/server/tls.go`) that guards the loaded `*tls.Certificate` under a `sync.Mutex`. The `*tls.Config` wires `GetCertificate` to the holder, so every new inbound TLS handshake reads whatever cert the holder currently has.
+
+Send `SIGHUP` to the server PID and the holder re-reads both files from disk. On success, the next new connection uses the new cert; in-flight requests finish on the previous cert. A log line goes out:
+
+```
+TLS cert reloaded via SIGHUP cert_path=/etc/certctl/tls/server.crt key_path=/etc/certctl/tls/server.key
+```
+
+On failure (missing file, malformed PEM, key does not sign cert), the old cert is retained and an error logs:
+
+```
+TLS cert reload failed; continuing with previous cert cert_path=… key_path=… error=…
+```
+
+This is deliberately fail-safe on reload (as opposed to fail-loud on startup). A cert-manager renewal race, a partially-copied file, a typo in a rotation script — none of those should crash a running server and drop every agent connection. The operator sees the error in logs, fixes the underlying issue, and sends another `SIGHUP`.
+
+Pair with cert-manager, certbot `--post-hook`, or any rotation tool that can fire a signal. For docker-compose, `docker compose kill -s HUP certctl-server` works. For Kubernetes, reload is typically handled by cert-manager updating the Secret and the mounted file changing on the next kubelet sync — no explicit SIGHUP needed if the volume mount is `subPath`-free.
+
+Startup is a different story. If the cert is missing or malformed at process start, the server exits non-zero rather than binding plaintext or attempting a retry loop. That's the HTTPS-only contract.
+
+## Client-side TLS: agents, CLI, MCP
+
+Everything that talks to the server enforces HTTPS on the URL.
+
+### Agent
+
+`CERTCTL_SERVER_URL` must be `https://…`. `http://`, bare hostnames, `ftp://`, `ws://`, and empty strings are rejected at startup by `validateHTTPSScheme` in `cmd/agent/main.go` with a diagnostic pointing at `upgrade-to-tls.md`. There is no warning-and-proceed path.
+
+Two additional env vars control how the agent verifies the server cert:
+
+- `CERTCTL_SERVER_CA_BUNDLE_PATH` — filesystem path to a PEM-encoded CA bundle that signed the server cert. Loaded into `*tls.Config.RootCAs` on the agent's HTTP client. If unset, the agent falls back to the OS system trust store.
+- `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY` — defaults to `false`. Setting it to `true` skips verification entirely. **Dev-only escape hatch.** The agent logs a prominent warning at startup (`TLS certificate verification is disabled … never enable this in production`). Use this only when dialing a demo server whose cert you haven't bothered to mount into the agent container.
+
+Equivalent CLI flags: `--ca-bundle <path>` and `--insecure-skip-verify`.
+
+If both the CA bundle and `InsecureSkipVerify=true` are set, `InsecureSkipVerify` wins — it's the whole point of the flag. Don't do this in production.
+
+### CLI (`certctl-cli`)
+
+Same contract as the agent:
+
+- `CERTCTL_SERVER_URL` defaults to `https://` scheme; `http://` rejected at startup
+- `--ca-bundle <path>` flag or `CERTCTL_SERVER_CA_BUNDLE_PATH` env var — CA bundle for server cert verification
+- `--insecure` flag or `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true` — skip verification (dev only)
+- Error diagnostic on empty URL explicitly mentions both `--server` and `CERTCTL_SERVER_URL` so operators see the right knob to turn
+
+The CLI shares the URL-scheme validation with the agent; the test pins in `cmd/cli/main_test.go:TestValidateHTTPSScheme` cover the full rejection matrix.
+
+### MCP server (`certctl-mcp-server`)
+
+Same three controls as CLI, env-var-driven only (no flags — MCP runs as a stdio subprocess and inherits env from the launching LLM client):
+
+- `CERTCTL_SERVER_URL` must start with `https://`
+- `CERTCTL_SERVER_CA_BUNDLE_PATH` optional CA bundle
+- `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY` optional skip
+
+Claude Desktop / other MCP client configs should set all three in the tool's env block.
+
+## Troubleshooting: fail-loud preflight errors
+
+Every preflight failure message ends with `(see docs/tls.md)` so this doc is the first hit when an operator searches. Common failures:
+
+**`CERTCTL_SERVER_TLS_CERT_PATH is empty: HTTPS-only control plane refuses to start`**
+Set the env var. For docker-compose this is already set to `/etc/certctl/tls/server.crt` in the shipped compose file — if you're seeing this, check the `certctl-tls-init` service logs to see why the init container didn't populate the volume. For Helm, check that `server.tls.existingSecret` or `server.tls.certManager.enabled=true` is set.
+
+**`TLS cert file "…" unreadable: …`**
+The cert path is set but `os.Stat` failed. Check filesystem permissions — the server runs as UID 1000 in our shipped Dockerfile; the cert needs to be readable by that UID. Typos in the path also land here.
+
+**`TLS cert/key pair invalid (cert="…" key="…"): …`**
+Both files exist but `tls.LoadX509KeyPair` refused them. Typical causes: the private key does not sign the certificate, the key is encrypted with a passphrase (not supported — remove the passphrase with `openssl pkey` before mounting), or one of the two is DER-encoded instead of PEM. Re-issue the pair from the same CA call and re-mount.
+
+**Client side: `tls: failed to verify certificate: x509: certificate signed by unknown authority`**
+The client did not trust the CA that signed the server cert. Either mount the CA bundle via `CERTCTL_SERVER_CA_BUNDLE_PATH`, add the CA to the system trust store on the client host, or (dev only) set `CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true`.
+
+**Client side: `tls: first record does not look like a TLS handshake`**
+The client is speaking plaintext HTTP to an HTTPS server (or vice-versa). Check that `CERTCTL_SERVER_URL` starts with `https://`. If you are upgrading from a pre-v2.2 release and your agents are old, they will surface this error until you roll the DaemonSet — see [`upgrade-to-tls.md`](upgrade-to-tls.md).
+
+## Related docs
+
+- [`upgrade-to-tls.md`](upgrade-to-tls.md) — one-step cutover from pre-HTTPS releases
+- [`quickstart.md`](quickstart.md) — docker-compose walkthrough with HTTPS examples
+- [`test-env.md`](test-env.md) — integration test environment (also HTTPS-only)
+- Milestone spec: `prompts/https-everywhere-milestone.md` (authoritative source for locked decisions)

docs/upgrade-to-tls.md

@@ -0,0 +1,194 @@
+# Upgrading to HTTPS-Everywhere (v2.2)
+
+certctl's control plane is HTTPS-only as of v2.2. There is no `http` mode, no `auto` mode, no dual-listener bind, no N-release migration window. The cutover is a single step. Out-of-date agents that still point at `http://…` fail at the TCP/TLS handshake layer on first connect after the upgrade and stay `Offline` in the dashboard until their env block is updated and the fleet is rolled.
+
+This doc walks operators through the cutover for the two shipped deployment topologies — docker-compose and Helm — and documents the failure modes and rollback posture explicitly.
+
+For the deep-dive on cert provisioning patterns, SIGHUP cert reload, and client-side CA-trust configuration, read [`tls.md`](tls.md). This doc is the narrow "how do I upgrade" procedure.
+
+## Preconditions
+
+Before you start, confirm:
+
+- **Shell access** to the server host and every agent host. The cutover requires you to restart the server and update every agent's env block.
+- **A cert+key source** for the server. Pick one:
+  - An internal CA that can issue a server cert (CN + SAN list covering every hostname / IP agents dial).
+  - A `cert-manager` install in the target Kubernetes cluster, plus a `ClusterIssuer` or `Issuer` you're willing to reference.
+  - Willingness to use the self-signed bootstrap that the shipped `deploy/docker-compose.yml` generates automatically. This is the right choice for dev and demo; it is the wrong choice for production.
+- **A maintenance window.** Out-of-date agents break at the TLS handshake and stay offline until rolled. Schedule the upgrade so the agent fleet can be updated in the same window as the server.
+- **Backups.** This is a one-way door (see the Rollback section below). Snapshot your PostgreSQL database before `docker compose down` or `helm upgrade`.
+
+There is no schema migration tied to this release; the only at-rest state that changes is the `certs` named volume (docker-compose) or the `tls.crt`/`tls.key` Secret (Helm).
+
+## Procedure — docker-compose operators
+
+The shipped `deploy/docker-compose.yml` includes a `certctl-tls-init` init container that self-signs an ECDSA-P256 (SHA-256 signature) cert on first boot and drops `server.crt`, `server.key`, and `ca.crt` into a named volume mounted read-only at `/etc/certctl/tls/` on the server and agent containers. No manual cert provisioning is required for the default stack. (Pre-v2.0.48 this was an ed25519 cert; see [`tls.md`](tls.md) Pattern 1 for the rationale and the `down -v && up --build` migration note.)
+
+1. **Pull the HTTPS-everywhere release.** From the repo root:
+
+   ```
+   git pull
+   ```
+
+   Confirm you're on a tag or `master` that contains the `certctl-tls-init` service in `deploy/docker-compose.yml`. Grep for it: `grep certctl-tls-init deploy/docker-compose.yml` should hit.
+
+2. **Stop the old plaintext cluster.**
+
+   ```
+   docker compose -f deploy/docker-compose.yml down
+   ```
+
+   Do not pass `-v`; keeping the PostgreSQL volume preserves your cert inventory, audit trail, and job history across the upgrade.
+
+3. **Bring the cluster back up with the HTTPS build.**
+
+   ```
+   docker compose -f deploy/docker-compose.yml up -d --build
+   ```
+
+   The `certctl-tls-init` service runs once, generates the self-signed cert into the `certs` volume, and exits with code 0. The server container waits for `certctl-tls-init` via `depends_on: { condition: service_completed_successfully }` and only starts once the cert material is on disk. The server's Docker healthcheck now uses `curl --cacert /etc/certctl/tls/ca.crt -f https://localhost:8443/health`, so the container only becomes healthy once the HTTPS listener is up and serving the bundled cert correctly.
+
+4. **Verify the HTTPS endpoint from the host.**
+
+   ```
+   curl --cacert $(docker compose -f deploy/docker-compose.yml exec -T certctl-server cat /etc/certctl/tls/ca.crt) https://localhost:8443/health
+   ```
+
+   Expect `{"status":"ok"}` with HTTP 200. If you get a TLS verification error, the CA bundle wasn't read correctly — re-run the `exec -T` command and pipe the output directly into `--cacert @-` or save it to a local file first. If you get `connection refused`, the server never finished startup — check `docker compose logs certctl-server` for a fail-loud preflight diagnostic pointing at `docs/tls.md`.
+
+5. **Confirm the bundled agent reconnects.** Agents inside the compose stack pick up the new URL (`CERTCTL_SERVER_URL=https://certctl-server:8443`) and the bundled CA (`CERTCTL_SERVER_CA_BUNDLE_PATH=/etc/certctl/tls/ca.crt`) from their env block automatically — no per-agent change needed. Tail the agent log:
+
+   ```
+   docker compose -f deploy/docker-compose.yml logs -f certctl-agent
+   ```
+
+   You should see `heartbeat sent` within 30 seconds. In the dashboard (`https://localhost:8443`), the agent should show as `Online`.
+
+**External agents** running outside the compose network (e.g., the `install-agent.sh`-installed systemd service on a separate host) need their env block updated manually before the cutover — see the Agent env block section below.
+
+## Procedure — Helm operators
+
+The Helm chart does not self-sign. It refuses to render (`helm template` exits non-zero) unless you configure one of two cert sources: an operator-supplied Secret, or a cert-manager `Certificate` CR. See [`tls.md`](tls.md) for the full pattern catalog.
+
+1. **Provision cert material.** Pick one of:
+
+   - **Operator-supplied Secret.** Issue a cert from your internal CA (or any other source) and load it into a `kubernetes.io/tls` Secret in the certctl namespace:
+
+     ```
+     kubectl create secret tls certctl-server-tls \
+       --cert=server.crt --key=server.key \
+       --namespace certctl
+     ```
+
+   - **cert-manager.** Set `server.tls.certManager.enabled=true` on the upgrade and reference an existing `ClusterIssuer` or `Issuer`:
+
+     ```
+     --set server.tls.certManager.enabled=true
+     --set server.tls.certManager.issuerRef.name=my-cluster-issuer
+     --set server.tls.certManager.issuerRef.kind=ClusterIssuer
+     ```
+
+2. **Upgrade the release.**
+
+   ```
+   helm upgrade certctl deploy/helm/certctl \
+     --namespace certctl \
+     --set server.tls.existingSecret=certctl-server-tls
+   ```
+
+   (Or the `certManager` variant.) If you omit both `server.tls.existingSecret` and `server.tls.certManager.enabled`, the chart fails at render time with a diagnostic pointing at `docs/tls.md`. That guard exists precisely so you catch the missing config at `helm upgrade` time, not at pod-crash-loop time.
+
+3. **Verify the HTTPS endpoint from inside the cluster.** Port-forward and curl with the CA bundle:
+
+   ```
+   kubectl port-forward -n certctl svc/certctl-server 8443:8443 &
+   kubectl get secret -n certctl certctl-server-tls -o jsonpath='{.data.ca\.crt}' | base64 -d > /tmp/certctl-ca.crt
+   curl --cacert /tmp/certctl-ca.crt https://localhost:8443/health
+   ```
+
+   Expect `{"status":"ok"}`. If the Secret does not contain a `ca.crt` key (operator-supplied Secrets often don't), use `tls.crt` as the bundle instead — for a self-signed cert the two files are identical, and for a cert chained to an internal CA you should separately distribute the root CA bundle via ConfigMap or mounted file.
+
+4. **Update every agent manifest.** Agents outside this Helm release (or in a separately-managed DaemonSet) need their env block updated:
+
+   ```
+   - name: CERTCTL_SERVER_URL
+     value: "https://certctl-server.certctl.svc.cluster.local:8443"
+   - name: CERTCTL_SERVER_CA_BUNDLE_PATH
+     value: "/etc/certctl/tls/ca.crt"
+   ```
+
+   Mount the server's Secret (or a separate CA-bundle Secret / ConfigMap) at `/etc/certctl/tls/` as a read-only volume. If you bundle the agent via the shipped Helm chart's DaemonSet, the wiring is already done — set `agent.enabled=true` and the chart mounts the same Secret.
+
+5. **Roll the agent DaemonSet.**
+
+   ```
+   kubectl rollout restart ds/certctl-agent -n certctl
+   kubectl rollout status ds/certctl-agent -n certctl
+   ```
+
+   Every agent pod restarts with the new URL + CA bundle and reconnects on HTTPS. The dashboard shows agents flip from `Offline` to `Online` as pods finish rolling.
+
+## Agent env block — external hosts
+
+Agents installed on bare-metal or VM hosts via `install-agent.sh` (systemd on Linux, launchd on macOS) read config from `/etc/certctl/agent.env` (Linux) or `~/Library/Application Support/certctl/agent.env` (macOS). On cutover, append or update:
+
+```
+CERTCTL_SERVER_URL=https://certctl.example.com:8443
+CERTCTL_SERVER_CA_BUNDLE_PATH=/etc/certctl/tls/ca.crt
+# CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=false    # Dev only. Never set to true in production.
+```
+
+Distribute the CA bundle (the same `ca.crt` the server holds, or the root chain if you issued the server cert from an intermediate) to every agent host. The path under `CERTCTL_SERVER_CA_BUNDLE_PATH` must be readable by the UID the agent service runs as.
+
+Restart the service after editing:
+
+- Linux: `systemctl restart certctl-agent`
+- macOS: `launchctl kickstart -k system/com.certctl.agent`
+
+The agent refuses to start on an `http://` URL and exits with a pre-flight diagnostic that names this doc. That rejection happens before any network call — no spurious half-connected state.
+
+## Failure mode
+
+Out-of-date agents still configured with `CERTCTL_SERVER_URL=http://…` fail on first reconnect after the cutover. The failure surfaces as one of:
+
+- `dial tcp …: connect: connection refused` — the server is no longer listening on a plaintext port. The new release binds only a TLS listener; attempting a plaintext `connect()` gets refused at the kernel level because nothing holds the socket.
+- `tls: first record does not look like a TLS handshake` — depending on timing and proxy layers (e.g., a load balancer that accepts the TCP connection before forwarding), the client may negotiate TCP, send an HTTP request line, and have the server's TLS stack reject it.
+
+Agents in this state surface as `Offline` in the dashboard. They stay offline until their env block is updated and the service restarts. There is no graceful 400-with-migration-URL response because there is no HTTP listener to serve one from — the entire plaintext call path is removed by design.
+
+If you see an unexpected agent stay `Offline` past the cutover window, SSH to the host and check the agent log. On a systemd host:
+
+```
+journalctl -u certctl-agent -n 100
+```
+
+Look for `URL scheme "http" is not supported: HTTPS-only control plane refuses to start (see docs/upgrade-to-tls.md)`. That's the pre-flight rejection. Update `CERTCTL_SERVER_URL`, restart the service, and the agent reconnects.
+
+## Rollback
+
+**There is no rollback window.** The upgrade is a one-way door. The rationale lives in §3.7 of `prompts/https-everywhere-milestone.md`: a cert-lifecycle product that bridges back to plaintext after committing to HTTPS is advertising that its own security posture is negotiable.
+
+If you need to revert, you have two options:
+
+1. **Stay on the pre-HTTPS release.** Do not upgrade until you are ready to run HTTPS on the control plane. Pin your `docker-compose.yml` or `helm upgrade` command to the last pre-v2.2 tag.
+2. **Rollback the release.** `helm rollback certctl <previous-revision>` or `git checkout <previous-tag> && docker compose up -d --build`. This rolls back the server, the compose topology, and the Helm chart in lockstep. Your PostgreSQL volume — cert inventory, audit trail, jobs — survives the rollback; nothing in this milestone changes the database schema.
+
+Option 2 drops you back to the plaintext world. It should be treated as an emergency measure, not a supported migration path.
+
+## After the cutover
+
+Once every agent is `Online`, confirm a few invariants:
+
+- `curl -sS -o /dev/null -w "%{http_code}\n" http://localhost:8443/health` returns `000` with `Connection refused` (no HTTP listener). Plaintext is gone.
+- `openssl s_client -connect localhost:8443 -tls1_2 </dev/null` fails the handshake. TLS 1.2 is rejected.
+- `openssl s_client -connect localhost:8443 -tls1_3 </dev/null` succeeds and prints the server's SAN list. TLS 1.3 is live.
+- A cert rotation test: overwrite the server cert on disk, `kill -HUP` the server PID, confirm the new cert serves on the next `openssl s_client -connect … -showcerts` without a process restart. See the SIGHUP section in [`tls.md`](tls.md).
+
+Update your runbooks. Every `http://certctl.example.com` URL in internal documentation, monitoring config, and on-call playbooks should become `https://certctl.example.com` plus a CA-trust note.
+
+## Related docs
+
+- [`tls.md`](tls.md) — cert provisioning patterns, SIGHUP rotation, troubleshooting
+- [`quickstart.md`](quickstart.md) — docker-compose walkthrough (post-HTTPS)
+- [`test-env.md`](test-env.md) — integration test environment (HTTPS-only)
+- Milestone spec: `prompts/https-everywhere-milestone.md`

docs/upgrade-to-v2-jwt-removal.md

@@ -0,0 +1,155 @@
+# Upgrading past G-1 — `CERTCTL_AUTH_TYPE=jwt` removal
+
+If your certctl deployment currently sets `CERTCTL_AUTH_TYPE=jwt` (or `server.auth.type=jwt` in Helm), the next certctl upgrade will fail-fast at startup with a dedicated diagnostic. This guide explains why, what to switch to, and how to keep JWT/OIDC at your edge.
+
+For everyone else — operators running `api-key` or `none` — this upgrade is a no-op. Skip to [`upgrade-to-tls.md`](upgrade-to-tls.md) for the v2.2 HTTPS-everywhere migration if you haven't done that one yet.
+
+## Why we removed it
+
+Pre-G-1, the config validator at `internal/config/config.go` accepted three values for `CERTCTL_AUTH_TYPE`: `api-key`, `jwt`, and `none`. The startup log line at `cmd/server/main.go` faithfully echoed `"authentication enabled" "type"="jwt"` when an operator picked `jwt`. Reasonable people read that and concluded JWT auth was on.
+
+It wasn't. Grep `internal/ cmd/` for `NewJWT`, `JWTMiddleware`, or `jwt.Parse` — pre-G-1, there were zero matches in production code. The auth-middleware wiring at `cmd/server/main.go:653` unconditionally called `middleware.NewAuthWithNamedKeys(namedKeys)` regardless of `cfg.Auth.Type`. So `CERTCTL_AUTH_TYPE=jwt` just routed every request through the api-key bearer middleware, comparing the incoming `Authorization: Bearer <something>` against whatever string the operator put in `CERTCTL_AUTH_SECRET`. Real JWT clients got 401 (the api-key middleware saw the JWT string as a literal token and compared bytes). Operators who treated `CERTCTL_AUTH_SECRET` as a JWT signing secret (and therefore handled it less carefully than an api-key) handed an attacker an api-key. Silent auth downgrade — a security finding masquerading as a config option.
+
+We chose to remove the option rather than implement JWT middleware. Implementing real JWT/OIDC requires jwks vs static-secret rotation, claim mapping (which claim is the actor / the admin flag?), expiry enforcement, audience and issuer validation, key rollover semantics, and regression coverage at the same depth as the existing api-key path. That's a feature, not a fix. The audit-recommended structural fix — and the one that actually closes the hazard — is to fail loudly instead of silently downgrading.
+
+## What changes at startup
+
+Post-G-1, a binary started with `CERTCTL_AUTH_TYPE=jwt` exits non-zero before opening the listener:
+
+```
+Failed to load configuration: CERTCTL_AUTH_TYPE=jwt is no longer accepted
+(G-1 silent auth downgrade): no JWT middleware ships with certctl. To use
+JWT/OIDC, run an authenticating gateway (oauth2-proxy / Envoy ext_authz /
+Traefik ForwardAuth / Pomerium) in front of certctl and set
+CERTCTL_AUTH_TYPE=none on the upstream. See docs/architecture.md
+"Authenticating-gateway pattern" and docs/upgrade-to-v2-jwt-removal.md
+for the migration walkthrough
+```
+
+Helm operators get the same shape at `helm install` / `helm upgrade` template time: `server.auth.type=jwt` is rejected by the chart's `certctl.validateAuthType` template helper before any Kubernetes object is rendered.
+
+The CI-side regression guard at `.github/workflows/ci.yml` blocks any future PR that re-introduces `"jwt"` as an auth-type literal in production code or spec.
+
+## Recovery — pick one
+
+### Option A — switch to `api-key` (you weren't actually using JWT)
+
+If your `CERTCTL_AUTH_SECRET` was a single high-entropy token and your clients sent it as `Authorization: Bearer <token>`, you were already using api-key auth — you just had `CERTCTL_AUTH_TYPE` set to the wrong string. Flip it:
+
+```
+# .env (docker-compose)
+CERTCTL_AUTH_TYPE=api-key
+CERTCTL_AUTH_SECRET=<your-existing-token>
+```
+
+```
+# Helm
+helm upgrade <release> deploy/helm/certctl/ \
+  --reuse-values \
+  --set server.auth.type=api-key \
+  --set server.auth.apiKey=<your-existing-token>
+```
+
+No client changes needed — the same Bearer token continues to work. The startup log will now read `"authentication enabled" "type"="api-key"`, which matches what was actually happening pre-G-1.
+
+### Option B — front certctl with an authenticating gateway
+
+If you genuinely need JWT, OIDC, mTLS, or SAML, run an authenticating gateway in front of certctl and let the gateway terminate the federated identity protocol. Configure certctl for `CERTCTL_AUTH_TYPE=none`:
+
+```
+CERTCTL_AUTH_TYPE=none
+```
+
+Then put an oauth2-proxy / Envoy `ext_authz` / Traefik `ForwardAuth` / Pomerium / Authelia (etc.) in the network path between operators and certctl. The gateway validates the identity and proxies the authenticated request to certctl as a same-origin call on a private network.
+
+### Concrete walkthrough — oauth2-proxy + certctl on docker-compose
+
+This is the simplest production-grade JWT/OIDC shape. It assumes you have an OIDC provider (Okta, Auth0, Google Workspace, Keycloak, Dex) and a registered client_id / client_secret.
+
+```yaml
+# deploy/docker-compose.gateway.yml — overlay on the base compose file
+services:
+  oauth2-proxy:
+    image: quay.io/oauth2-proxy/oauth2-proxy:latest
+    command:
+      - --provider=oidc
+      - --oidc-issuer-url=https://<your-issuer>/
+      - --client-id=${OIDC_CLIENT_ID}
+      - --client-secret=${OIDC_CLIENT_SECRET}
+      - --cookie-secret=${OAUTH2_PROXY_COOKIE_SECRET}  # openssl rand -base64 32
+      - --upstream=http://certctl-server:8443  # internal-network only; certctl listens on 8443
+      - --http-address=0.0.0.0:4180
+      - --email-domain=*
+      - --pass-access-token=true
+      - --pass-authorization-header=true
+      - --set-authorization-header=true       # forwards a bearer token upstream
+      - --skip-provider-button=true
+      - --reverse-proxy=true
+    ports:
+      - "443:4180"
+    depends_on:
+      - certctl-server
+    networks:
+      - certctl-network
+
+  certctl-server:
+    environment:
+      CERTCTL_AUTH_TYPE: none   # gateway terminates auth — see docs/upgrade-to-v2-jwt-removal.md
+      # ... rest of the certctl env block unchanged
+```
+
+Operators hit `https://<your-host>/`, get redirected through the OIDC provider, land back at oauth2-proxy with a session cookie, and oauth2-proxy proxies their request to certctl on the internal Docker network. certctl itself is HTTPS-only on `:8443` (TLS 1.3, see [`tls.md`](tls.md)) but operator browsers never see that hop directly. Bind certctl-server's `:8443` to the internal Docker network only — do NOT publish it to the host. The audit trail will record the actor as the gateway-forwarded identity if you also configure a small bearer-token-mapping shim at the gateway (most production deployments do this with a per-user api-key issued by the gateway after OIDC validation).
+
+### Traefik ForwardAuth pattern (Kubernetes)
+
+Same shape, kubernetes-flavored:
+
+```yaml
+apiVersion: traefik.io/v1alpha1
+kind: Middleware
+metadata:
+  name: oidc-forward-auth
+spec:
+  forwardAuth:
+    address: http://oauth2-proxy.auth.svc.cluster.local:4180
+    trustForwardHeader: true
+    authResponseHeaders:
+      - X-Auth-Request-User
+      - X-Auth-Request-Email
+      - Authorization
+---
+apiVersion: traefik.io/v1alpha1
+kind: IngressRoute
+metadata:
+  name: certctl
+spec:
+  routes:
+    - match: Host(`certctl.example.com`)
+      kind: Rule
+      middlewares:
+        - name: oidc-forward-auth
+      services:
+        - name: certctl-server
+          port: 8443
+```
+
+The certctl Helm release runs with `server.auth.type=none`. The Traefik IngressRoute attaches `oidc-forward-auth` as a middleware so every request is OIDC-validated by oauth2-proxy before reaching certctl.
+
+### Envoy `ext_authz` pattern
+
+For service-mesh deployments (Istio, Consul, plain Envoy), the `ext_authz` filter calls out to an external authorization service per-request. Same outcome: certctl runs `CERTCTL_AUTH_TYPE=none` and Envoy + your authz service handle JWT/OIDC/mTLS at the mesh edge. See the [Envoy ext_authz docs](https://www.envoyproxy.io/docs/envoy/latest/configuration/http/http_filters/ext_authz_filter) for the configuration surface.
+
+## Rollback
+
+Pre-G-1 binaries silently accepted `CERTCTL_AUTH_TYPE=jwt` and routed through the api-key middleware. Downgrading the binary is the only mechanical rollback path, and it puts you back into the silent-downgrade state — which is exactly what the G-1 audit finding is about. We don't recommend it. If something is forcing your hand, capture the operational issue you're hitting and open a GitHub issue against the certctl repo with the SHAs involved; the Authenticating-gateway pattern was specifically designed to cover the use cases that historically led operators to set `CERTCTL_AUTH_TYPE=jwt`.
+
+There is no on-disk state that changes with this upgrade — no migrations to roll back, no encrypted config to re-encode, no certificates to re-issue. The change is entirely in the config-validation surface and the helm-chart template guard.
+
+## Cross-references
+
+- [`architecture.md`](architecture.md) — "Authenticating-gateway pattern (JWT, OIDC, mTLS)" section.
+- [`tls.md`](tls.md) — TLS provisioning patterns. The gateway proxying to certctl-server still needs to trust certctl's TLS cert; same patterns apply.
+- [`../deploy/helm/certctl/README.md`](../deploy/helm/certctl/README.md) — Helm-chart-flavored guidance.
+- `internal/config/config.go::ValidAuthTypes` — the single source of truth for what's accepted post-G-1.
+- `internal/repository/postgres/db.go::wrapPingError` — unrelated; pattern for runtime diagnostic of operator misconfiguration.
+- `coverage-gap-audit-2026-04-24-v5/unified-audit.md` — the audit finding (`cat-g-jwt_silent_auth_downgrade`).

docs/why-certctl.md

@@ -107,7 +107,7 @@ The demo seeds certificates across multiple issuers, agents, and deployment targ
 ```bash
 git clone https://github.com/shankar0123/certctl.git
 cd certctl/deploy && docker compose up -d
-# Dashboard at http://localhost:8443
+# Dashboard at https://localhost:8443 (self-signed cert — pin deploy/test/certs/ca.crt)
 ```
 
 See the [Quickstart Guide](quickstart.md) for a full walkthrough, or explore the [5 turnkey examples](../examples/) for specific scenarios (ACME+NGINX, wildcard DNS-01, private CA+Traefik, step-ca+HAProxy, multi-issuer).

examples/README.md

@@ -0,0 +1,55 @@
+# Deployment Examples
+
+Five turnkey docker-compose scenarios that show certctl deployed against real CA backends and target shapes. Each subdirectory is self-contained — pick the one closest to your stack and have it running in minutes.
+
+| Example | Stack | What it shows |
+|---------|-------|---------------|
+| [`acme-nginx/`](acme-nginx/acme-nginx.md) | Let's Encrypt + NGINX (HTTP-01) | The default public-CA path: ACME-issued certs deployed to NGINX. |
+| [`acme-wildcard-dns01/`](acme-wildcard-dns01/acme-wildcard-dns01.md) | Let's Encrypt wildcard (DNS-01) | Wildcard certificates via DNS-01 with pluggable DNS hooks. |
+| [`private-ca-traefik/`](private-ca-traefik/private-ca-traefik.md) | Local CA + Traefik | Internal-only certs from a private CA, deployed to Traefik. |
+| [`step-ca-haproxy/`](step-ca-haproxy/step-ca-haproxy.md) | Smallstep step-ca + HAProxy | Self-hosted CA with HAProxy as the deployment target. |
+| [`multi-issuer/`](multi-issuer/multi-issuer.md) | Let's Encrypt + Local CA | Public + private certs side-by-side from a single dashboard. |
+
+## Common operational notes
+
+These notes apply to **every** example. They're called out here so the per-example walkthroughs stay focused on the issuer/target wiring instead of repeating ops boilerplate.
+
+### Postgres password rotation — first-boot binding trap (U-1)
+
+Every example file uses `${DB_PASSWORD:-certctl-dev-password}` as the postgres password env var, with the data directory persisted via a named volume. The `postgres:16-alpine` image runs `initdb` exactly once — when `/var/lib/postgresql/data` is empty — and that's the only time `POSTGRES_PASSWORD` is written into `pg_authid`. If you boot once with the default and then change `DB_PASSWORD` (in your shell, in a `.env` file, or in a wrapper script), the certctl-server container picks up the new value but the postgres container continues to authenticate against the old one. The server fails its startup `db.Ping()` with `pq: password authentication failed for user "certctl"` (SQLSTATE 28P01).
+
+The certctl-server emits guidance pointing at the fix when this fires (see `internal/repository/postgres/db.go::wrapPingError`). The two remediation paths:
+
+- **Destructive — wipes all certctl data, only acceptable on demo/test setups:**
+  ```bash
+  docker compose -f examples/<example>/docker-compose.yml down -v
+  docker compose -f examples/<example>/docker-compose.yml up -d --build
+  ```
+- **Non-destructive — preserves data, rotates `pg_authid` in place:**
+  ```bash
+  docker compose -f examples/<example>/docker-compose.yml exec postgres \
+    psql -U certctl -c "ALTER ROLE certctl PASSWORD '<new>';"
+  # Then redeploy with DB_PASSWORD set to <new> in your shell or .env
+  ```
+
+The cleanest practice for a fresh demo: set `DB_PASSWORD` once in your shell **before** the very first `docker compose up`, and don't change it during the demo's lifetime. If you must rotate, use the non-destructive path.
+
+Same root cause and remediation pattern is documented for the canonical quickstart in [`../docs/quickstart.md`](../docs/quickstart.md), the production compose surface in [`../deploy/ENVIRONMENTS.md`](../deploy/ENVIRONMENTS.md), and the Helm chart in [`../deploy/helm/certctl/README.md`](../deploy/helm/certctl/README.md).
+
+### TLS for the certctl control plane
+
+Every example boots certctl with HTTPS-only on port 8443 (TLS 1.3 pinned, no plaintext listener as of v2.2). The shipped `certctl-tls-init` init container generates a self-signed ECDSA-P256 cert on first boot — fine for the example demos, **never** acceptable for a public deployment. For production, swap the init container for cert-manager, an operator-supplied Secret, or your internal CA — see [`../docs/tls.md`](../docs/tls.md) for the full pattern matrix.
+
+### Tearing down
+
+To stop services but **keep** the postgres volume (so you can pick up where you left off):
+```bash
+docker compose -f examples/<example>/docker-compose.yml down
+```
+
+To stop services **and** wipe all data (clean slate for the next run):
+```bash
+docker compose -f examples/<example>/docker-compose.yml down -v
+```
+
+Note that `down -v` is the only canonical way to recover from the postgres-password trap when the non-destructive `ALTER ROLE` route is unavailable (e.g., you've forgotten the original password).

examples/acme-nginx/acme-nginx.md

@@ -2,6 +2,8 @@
 
 This example demonstrates certctl's core use case: **automatically manage TLS certificates for NGINX using Let's Encrypt (ACME HTTP-01 challenges).**
 
+> **Operational notes** shared by every example (postgres password rotation trap, TLS provisioning, teardown semantics) live in [`../README.md`](../README.md). Read it first if you plan to change `DB_PASSWORD` after the initial `docker compose up` — the postgres volume binds the password on first boot only.
+
 ## What This Does
 
 - Deploys certctl server (control plane) with PostgreSQL
@@ -36,6 +38,13 @@ flowchart TD
 
 If you don't have a real domain or can't open port 80, see [Customization Tips](#customization-tips) below.
 
+## TLS Security
+
+certctl is HTTPS-only as of v2.2. The demo compose stack provisions a self-signed certificate. When accessing `https://localhost:8443`, you can either:
+- Use `curl --cacert ./deploy/test/certs/ca.crt ...` to pin the CA certificate
+- Use `curl -k ...` for quick smoke tests (never in production)
+- Import the CA at `./deploy/test/certs/ca.crt` into your OS trust store for browser visits
+
 ## Quick Start
 
 ### 1. Clone or copy this example
@@ -122,7 +131,7 @@ docker compose logs -f certctl-server certctl-agent
 
 ### 5. Access the dashboard
 
-Navigate to `http://localhost:8443` (or your `SERVER_PORT`)
+Navigate to `https://localhost:8443` (or your `SERVER_PORT`)
 
 You should see:
 - An empty certificate inventory (no certs issued yet)

examples/acme-nginx/docker-compose.yml

@@ -61,7 +61,7 @@ services:
     networks:
       - certctl-network
     healthcheck:
-      test: ['CMD-SHELL', 'curl -sf http://localhost:8443/health || exit 1']
+      test: ['CMD-SHELL', 'curl -sfk https://localhost:8443/health || exit 1']
       interval: 10s
       timeout: 5s
       retries: 3

examples/acme-wildcard-dns01/acme-wildcard-dns01.md

@@ -2,6 +2,8 @@
 
 **What this does:** Issues wildcard certificates (e.g., `*.example.com`) from Let's Encrypt using DNS-01 challenge validation.
 
+> **Operational notes** shared by every example (postgres password rotation trap, TLS provisioning, teardown semantics) live in [`../README.md`](../README.md). Read it first if you plan to change `DB_PASSWORD` after the initial `docker compose up` — the postgres volume binds the password on first boot only.
+
 This example is ideal for:
 - Issuing wildcard certificates (`*.example.com`)
 - Services behind NAT, firewalls, or non-public networks
@@ -9,6 +11,13 @@ This example is ideal for:
 - Internal PKI with public DNS names
 - Scenarios where you have programmatic access to your DNS provider's API
 
+## TLS Security
+
+certctl is HTTPS-only as of v2.2. The demo compose stack provisions a self-signed certificate. When accessing `https://localhost:8443`, you can either:
+- Use `curl --cacert ./deploy/test/certs/ca.crt ...` to pin the CA certificate
+- Use `curl -k ...` for quick smoke tests (never in production)
+- Import the CA at `./deploy/test/certs/ca.crt` into your OS trust store for browser visits
+
 ## Prerequisites
 
 Before running this example, you need:
@@ -74,7 +83,7 @@ This starts:
 
 ### Step 5: Access the Dashboard
 
-Open your browser to `http://localhost:8443`
+Open your browser to `https://localhost:8443`
 
 ### Step 6: Create a Wildcard Certificate
 

examples/acme-wildcard-dns01/docker-compose.yml

@@ -113,7 +113,7 @@ services:
       - certctl-network
 
     healthcheck:
-      test: ['CMD-SHELL', 'curl -sf http://localhost:8443/health || exit 1']
+      test: ['CMD-SHELL', 'curl -sfk https://localhost:8443/health || exit 1']
       interval: 10s
       timeout: 5s
       retries: 3

examples/multi-issuer/docker-compose.yml

@@ -64,7 +64,7 @@ services:
     networks:
       - certctl-network
     healthcheck:
-      test: ['CMD-SHELL', 'curl -sf http://localhost:8443/health || exit 1']
+      test: ['CMD-SHELL', 'curl -sfk https://localhost:8443/health || exit 1']
       interval: 10s
       timeout: 5s
       retries: 3

examples/multi-issuer/multi-issuer.md

@@ -2,6 +2,8 @@
 
 This example demonstrates certctl managing **both public and internal certificates from a single dashboard**. Public-facing services use Let's Encrypt (ACME), while internal services use a private Local CA — all visible and managed in one place.
 
+> **Operational notes** shared by every example (postgres password rotation trap, TLS provisioning, teardown semantics) live in [`../README.md`](../README.md). Read it first if you plan to change `DB_PASSWORD` after the initial `docker compose up` — the postgres volume binds the password on first boot only.
+
 ## The Use Case
 
 You have:
@@ -45,6 +47,13 @@ flowchart TD
 - **Domain for ACME** (optional) — if using real Let's Encrypt, not needed for demo
 - **Internet connectivity** — to reach Let's Encrypt's API (demo can use staging directory)
 
+## TLS Security
+
+certctl is HTTPS-only as of v2.2. The demo compose stack provisions a self-signed certificate. When accessing `https://localhost:8443`, you can either:
+- Use `curl --cacert ./deploy/test/certs/ca.crt ...` to pin the CA certificate
+- Use `curl -k ...` for quick smoke tests (never in production)
+- Import the CA at `./deploy/test/certs/ca.crt` into your OS trust store for browser visits
+
 ## Quick Start
 
 ### 1. Clone or navigate to this directory
@@ -83,7 +92,7 @@ This spins up:
 
 ### 4. Access the dashboard
 
-Open your browser to **http://localhost:8443** (or your configured SERVER_PORT)
+Open your browser to **https://localhost:8443** (or your configured SERVER_PORT)
 
 You should see:
 - Empty cert inventory (fresh start)

examples/private-ca-traefik/docker-compose.yml

@@ -77,7 +77,7 @@ services:
     networks:
       - certctl-network
     healthcheck:
-      test: ['CMD-SHELL', 'curl -sf http://localhost:8443/health || exit 1']
+      test: ['CMD-SHELL', 'curl -sfk https://localhost:8443/health || exit 1']
       interval: 10s
       timeout: 5s
       retries: 3

examples/private-ca-traefik/private-ca-traefik.md

@@ -1,5 +1,7 @@
 # Private CA + Traefik Example
 
+> **Operational notes** shared by every example (postgres password rotation trap, TLS provisioning, teardown semantics) live in [`../README.md`](../README.md). Read it first if you plan to change `DB_PASSWORD` after the initial `docker compose up` — the postgres volume binds the password on first boot only.
+
 This example demonstrates certctl managing certificates for **internal services without public CA dependency**. Ideal for enterprise environments where:
 
 - All services are internal (VPN, private networks)
@@ -29,6 +31,13 @@ flowchart TD
     C -->|TLS handshakes| D
 ```
 
+## TLS Security
+
+certctl is HTTPS-only as of v2.2. The demo compose stack provisions a self-signed certificate. When accessing `https://localhost:8443`, you can either:
+- Use `curl --cacert ./deploy/test/certs/ca.crt ...` to pin the CA certificate
+- Use `curl -k ...` for quick smoke tests (never in production)
+- Import the CA at `./deploy/test/certs/ca.crt` into your OS trust store for browser visits
+
 ## Quick Start (Self-Signed CA)
 
 The simplest way to get running in 2 minutes:
@@ -58,7 +67,7 @@ EOF
 docker compose up -d
 
 # 4. Access the dashboards
-# - certctl: http://localhost:8443 (API only, use the CLI or direct HTTP calls)
+# - certctl: https://localhost:8443 (API only, use the CLI or direct HTTP calls)
 # - Traefik dashboard: http://localhost:8080
 ```
 
@@ -112,7 +121,7 @@ Once the stack is running:
 
 ```bash
 # 1. Create a certificate profile in certctl (defines allowed key types, TTL, etc.)
-curl -X POST http://localhost:8443/api/v1/profiles \
+curl -X POST https://localhost:8443/api/v1/profiles \
   -H "Content-Type: application/json" \
   -d '{
     "id": "prof-internal",
@@ -123,7 +132,7 @@ curl -X POST http://localhost:8443/api/v1/profiles \
   }'
 
 # 2. Create a renewal policy (defines issuer, renewal thresholds, etc.)
-curl -X POST http://localhost:8443/api/v1/policies \
+curl -X POST https://localhost:8443/api/v1/policies \
   -H "Content-Type: application/json" \
   -d '{
     "id": "pol-internal",
@@ -135,7 +144,7 @@ curl -X POST http://localhost:8443/api/v1/policies \
   }'
 
 # 3. Create a certificate (triggers issuance immediately)
-curl -X POST http://localhost:8443/api/v1/certificates \
+curl -X POST https://localhost:8443/api/v1/certificates \
   -H "Content-Type: application/json" \
   -d '{
     "common_name": "api.internal.local",
@@ -144,7 +153,7 @@ curl -X POST http://localhost:8443/api/v1/certificates \
   }'
 
 # 4. Create a Traefik target (agent will deploy to this)
-curl -X POST http://localhost:8443/api/v1/targets \
+curl -X POST https://localhost:8443/api/v1/targets \
   -H "Content-Type: application/json" \
   -d '{
     "id": "target-traefik-01",
@@ -156,7 +165,7 @@ curl -X POST http://localhost:8443/api/v1/targets \
   }'
 
 # 5. Create a deployment job (agent picks this up and deploys)
-curl -X POST http://localhost:8443/api/v1/certificates/{cert-id}/deploy \
+curl -X POST https://localhost:8443/api/v1/certificates/{cert-id}/deploy \
   -H "Content-Type: application/json" \
   -d '{
     "target_ids": ["target-traefik-01"]
@@ -209,16 +218,16 @@ The server provides a REST API on port 8443. Example queries:
 
 ```bash
 # List all certificates
-curl http://localhost:8443/api/v1/certificates
+curl https://localhost:8443/api/v1/certificates
 
 # Check certificate status
-curl http://localhost:8443/api/v1/certificates/{cert-id}
+curl https://localhost:8443/api/v1/certificates/{cert-id}
 
 # View audit trail
-curl http://localhost:8443/api/v1/audit
+curl https://localhost:8443/api/v1/audit
 
 # Check renewal policy compliance
-curl http://localhost:8443/api/v1/policies/{policy-id}
+curl https://localhost:8443/api/v1/policies/{policy-id}
 ```
 
 ### Traefik Dashboard
@@ -290,7 +299,7 @@ Changes are picked up automatically (file watcher enabled).
 docker compose logs certctl-agent | grep heartbeat
 
 # Check deployment job status
-curl http://localhost:8443/api/v1/jobs | jq '.[] | select(.type == "Deployment")'
+curl https://localhost:8443/api/v1/jobs | jq '.[] | select(.type == "Deployment")'
 
 # Check Traefik is watching the directory
 docker compose exec traefik ls -la /etc/traefik/certs/

examples/step-ca-haproxy/docker-compose.yml

@@ -119,7 +119,7 @@ services:
     networks:
       - certctl-network
     healthcheck:
-      test: ['CMD-SHELL', 'curl -sf http://localhost:8443/health || exit 1']
+      test: ['CMD-SHELL', 'curl -sfk https://localhost:8443/health || exit 1']
       interval: 10s
       timeout: 5s
       retries: 3

examples/step-ca-haproxy/step-ca-haproxy.md

@@ -2,6 +2,8 @@
 
 This example demonstrates certctl managing certificates issued by **Smallstep step-ca** and deploying them to **HAProxy**.
 
+> **Operational notes** shared by every example (postgres password rotation trap, TLS provisioning, teardown semantics) live in [`../README.md`](../README.md). Read it first if you plan to change `DB_PASSWORD` after the initial `docker compose up` — the postgres volume binds the password on first boot only.
+
 ## Scenario
 
 You're a Smallstep user running step-ca as your internal PKI. You have HAProxy load balancers that need certificates. This setup:
@@ -48,6 +50,13 @@ Monitor logs:
 docker compose logs -f certctl-server
 ```
 
+## TLS Security
+
+certctl is HTTPS-only as of v2.2. The demo compose stack provisions a self-signed certificate. When accessing `https://localhost:8443`, you can either:
+- Use `curl --cacert ./deploy/test/certs/ca.crt ...` to pin the CA certificate
+- Use `curl -k ...` for quick smoke tests (never in production)
+- Import the CA at `./deploy/test/certs/ca.crt` into your OS trust store for browser visits
+
 Wait for all services to reach healthy state:
 
 ```bash
@@ -69,7 +78,7 @@ certctl-haproxy-...               healthy
 Open your browser to:
 
 ```
-http://localhost:8443
+https://localhost:8443
 ```
 
 You should see an empty dashboard. This is expected — no certificates issued yet.
@@ -79,7 +88,7 @@ You should see an empty dashboard. This is expected — no certificates issued y
 This defines what certificates certctl can issue (key algorithm, max TTL, allowed names).
 
 ```bash
-curl -X POST http://localhost:8443/api/v1/profiles \
+curl -X POST https://localhost:8443/api/v1/profiles \
   -H 'Content-Type: application/json' \
   -d '{
     "name": "internal-web",
@@ -94,7 +103,7 @@ curl -X POST http://localhost:8443/api/v1/profiles \
 This tells certctl where to deploy certificates on the HAProxy server.
 
 ```bash
-curl -X POST http://localhost:8443/api/v1/targets \
+curl -X POST https://localhost:8443/api/v1/targets \
   -H 'Content-Type: application/json' \
   -d '{
     "name": "haproxy-01",
@@ -115,7 +124,7 @@ Note: In the Docker Compose environment, reload command can be `kill -HUP $(pido
 This ties a certificate profile to a deployment target and sets renewal thresholds.
 
 ```bash
-curl -X POST http://localhost:8443/api/v1/renewal-policies \
+curl -X POST https://localhost:8443/api/v1/renewal-policies \
   -H 'Content-Type: application/json' \
   -d '{
     "name": "haproxy-internal-web",
@@ -130,7 +139,7 @@ curl -X POST http://localhost:8443/api/v1/renewal-policies \
 Get the issuer ID:
 
 ```bash
-curl http://localhost:8443/api/v1/issuers | jq '.'
+curl https://localhost:8443/api/v1/issuers | jq '.'
 ```
 
 You should see `iss-stepca` in the list.
@@ -140,7 +149,7 @@ You should see `iss-stepca` in the list.
 Request a certificate via the API. The server will sign it via step-ca.
 
 ```bash
-curl -X POST http://localhost:8443/api/v1/certificates \
+curl -X POST https://localhost:8443/api/v1/certificates \
   -H 'Content-Type: application/json' \
   -d '{
     "common_name": "api.internal.example.com",
@@ -155,7 +164,7 @@ curl -X POST http://localhost:8443/api/v1/certificates \
 Get the certificate ID and trigger deployment:
 
 ```bash
-curl -X POST http://localhost:8443/api/v1/certificates/<cert_id>/deploy \
+curl -X POST https://localhost:8443/api/v1/certificates/<cert_id>/deploy \
   -H 'Content-Type: application/json' \
   -d '{
     "target_id": "<target_id_from_step_4>"
@@ -171,7 +180,7 @@ The agent will:
 
 ### 8. Verify in Dashboard
 
-Refresh http://localhost:8443 and you should see:
+Refresh https://localhost:8443 and you should see:
 - 1 certificate (status: Active, expiry in 90 days)
 - 1 deployment job (status: Completed)
 - 1 agent (heartbeat: recent)

install-agent.sh

@@ -75,6 +75,14 @@ EXAMPLES:
           --server-url https://certctl.example.com \\
           --api-key YOUR_API_KEY
 
+CONTROL-PLANE TLS TRUST:
+    The certctl server is HTTPS-only as of v2.2. This installer does NOT copy a CA
+    bundle — the generated agent.env leaves TLS trust to the system root store by
+    default. If the server uses a private/enterprise or self-signed CA, set
+    CERTCTL_SERVER_CA_BUNDLE_PATH in the generated agent.env to point at the CA
+    bundle, or (dev only) CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true. See the
+    commented block in the generated agent.env for the full menu.
+
 EOF
 }
 
@@ -322,7 +330,7 @@ setup_linux_config() {
 # Agent ID (unique identifier in the fleet)
 CERTCTL_AGENT_ID=$AGENT_ID
 
-# Control plane server URL
+# Control plane server URL (HTTPS-only as of v2.2)
 CERTCTL_SERVER_URL=$SERVER_URL
 
 # API authentication key
@@ -334,6 +342,21 @@ CERTCTL_KEYGEN_MODE=agent
 # Key storage directory (agent-side keygen)
 CERTCTL_KEY_DIR=$key_dir
 
+# ---- Control-plane TLS trust ----
+# The certctl server is HTTPS-only (v2.2+). The agent's HTTP client MUST trust the
+# server's certificate chain. Pick ONE of the approaches below:
+#
+#   1) Public CA (Let's Encrypt, DigiCert, etc.) — no config needed; system trust store works.
+#   2) Private / enterprise CA — point the agent at the CA bundle that signed the server cert:
+# CERTCTL_SERVER_CA_BUNDLE_PATH=/etc/certctl/server-ca.crt
+#
+#   3) Self-signed server cert (Helm/compose bootstrap) — same env var, just point at the
+#      extracted self-signed CA bundle (e.g. from the certctl-server-tls Kubernetes secret
+#      via: kubectl get secret certctl-server-tls -o jsonpath='{.data.ca\.crt}' | base64 -d).
+#
+#   4) Dev/eval only — disable verification entirely (NEVER do this in production):
+# CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true
+
 # Logging level (debug, info, warn, error)
 # CERTCTL_LOG_LEVEL=info
 
@@ -373,7 +396,7 @@ setup_macos_config() {
 # Agent ID (unique identifier in the fleet)
 CERTCTL_AGENT_ID=$AGENT_ID
 
-# Control plane server URL
+# Control plane server URL (HTTPS-only as of v2.2)
 CERTCTL_SERVER_URL=$SERVER_URL
 
 # API authentication key
@@ -385,6 +408,21 @@ CERTCTL_KEYGEN_MODE=agent
 # Key storage directory (agent-side keygen)
 CERTCTL_KEY_DIR=$key_dir
 
+# ---- Control-plane TLS trust ----
+# The certctl server is HTTPS-only (v2.2+). The agent's HTTP client MUST trust the
+# server's certificate chain. Pick ONE of the approaches below:
+#
+#   1) Public CA (Let's Encrypt, DigiCert, etc.) — no config needed; system trust store works.
+#   2) Private / enterprise CA — point the agent at the CA bundle that signed the server cert:
+# CERTCTL_SERVER_CA_BUNDLE_PATH=$HOME/.certctl/server-ca.crt
+#
+#   3) Self-signed server cert (Helm/compose bootstrap) — same env var, just point at the
+#      extracted self-signed CA bundle (e.g. from the certctl-server-tls Kubernetes secret
+#      via: kubectl get secret certctl-server-tls -o jsonpath='{.data.ca\.crt}' | base64 -d).
+#
+#   4) Dev/eval only — disable verification entirely (NEVER do this in production):
+# CERTCTL_SERVER_TLS_INSECURE_SKIP_VERIFY=true
+
 # Logging level (debug, info, warn, error)
 # CERTCTL_LOG_LEVEL=info
 

internal/api/handler/adversarial_path_test.go

@@ -247,26 +247,30 @@ func TestGetCertificateVersions_MultiSegment(t *testing.T) {
 }
 
 // TestHandleOCSP_MultiSegment exercises the OCSP responder's 2-segment path
-// parser (/api/v1/ocsp/{issuer_id}/{serial_hex}). Each leg is attacker-
-// controlled and the serial can be arbitrary length. This is a key adversarial
-// surface because the serial is passed directly to the CA-operations service,
-// which is expected to treat it as an opaque identifier.
+// parser (/.well-known/pki/ocsp/{issuer_id}/{serial_hex}). Each leg is
+// attacker-controlled and the serial can be arbitrary length. This is a key
+// adversarial surface because the serial is passed directly to the
+// CA-operations service, which is expected to treat it as an opaque
+// identifier.
+//
+// M-006 relocation: these paths were previously served at /api/v1/ocsp/*;
+// under RFC 8615 and RFC 6960 they now live under /.well-known/pki/ocsp/*.
 func TestHandleOCSP_MultiSegment(t *testing.T) {
 	cases := []struct {
 		name string
 		path string
 	}{
-		{"missing_serial", "/api/v1/ocsp/iss-local"},
-		{"missing_both", "/api/v1/ocsp/"},
-		{"empty_issuer", "/api/v1/ocsp//01ABCDEF"},
-		{"empty_serial", "/api/v1/ocsp/iss-local/"},
-		{"traversal_issuer", "/api/v1/ocsp/..%2F..%2Fetc/passwd/01"},
-		{"null_byte_serial", "/api/v1/ocsp/iss-local/01\x00FF"},
-		{"sql_injection_serial", "/api/v1/ocsp/iss-local/01'; DROP TABLE--"},
-		{"negative_hex_serial", "/api/v1/ocsp/iss-local/-1"},
-		{"unicode_serial", "/api/v1/ocsp/iss-local/01\u2010FF"},
-		{"extremely_long_serial", "/api/v1/ocsp/iss-local/" + strings.Repeat("F", 10000)},
-		{"extra_segments", "/api/v1/ocsp/iss-local/01FF/extra/segments"},
+		{"missing_serial", "/.well-known/pki/ocsp/iss-local"},
+		{"missing_both", "/.well-known/pki/ocsp/"},
+		{"empty_issuer", "/.well-known/pki/ocsp//01ABCDEF"},
+		{"empty_serial", "/.well-known/pki/ocsp/iss-local/"},
+		{"traversal_issuer", "/.well-known/pki/ocsp/..%2F..%2Fetc/passwd/01"},
+		{"null_byte_serial", "/.well-known/pki/ocsp/iss-local/01\x00FF"},
+		{"sql_injection_serial", "/.well-known/pki/ocsp/iss-local/01'; DROP TABLE--"},
+		{"negative_hex_serial", "/.well-known/pki/ocsp/iss-local/-1"},
+		{"unicode_serial", "/.well-known/pki/ocsp/iss-local/01\u2010FF"},
+		{"extremely_long_serial", "/.well-known/pki/ocsp/iss-local/" + strings.Repeat("F", 10000)},
+		{"extra_segments", "/.well-known/pki/ocsp/iss-local/01FF/extra/segments"},
 	}
 
 	for _, tc := range cases {
@@ -301,7 +305,9 @@ func TestHandleOCSP_MultiSegment(t *testing.T) {
 	}
 }
 
-// TestGetDERCRL_IssuerPathInjection exercises /api/v1/crl/{issuer_id}.
+// TestGetDERCRL_IssuerPathInjection exercises
+// /.well-known/pki/crl/{issuer_id} (RFC 5280 CRL; M-006 relocation from
+// /api/v1/crl/{issuer_id}).
 func TestGetDERCRL_IssuerPathInjection(t *testing.T) {
 	for _, tc := range adversarialPathInputs() {
 		t.Run(tc.name, func(t *testing.T) {
@@ -316,8 +322,8 @@ func TestGetDERCRL_IssuerPathInjection(t *testing.T) {
 				return nil, ErrMockNotFound
 			}
 
-			req := httptest.NewRequest(http.MethodGet, "/api/v1/crl/x", nil)
-			req.URL.Path = "/api/v1/crl/" + tc.input
+			req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/crl/x", nil)
+			req.URL.Path = "/.well-known/pki/crl/" + tc.input
 			req = req.WithContext(contextWithRequestID())
 
 			w := httptest.NewRecorder()

internal/api/handler/agent_handler_test.go

@@ -10,6 +10,7 @@ import (
 	"time"
 
 	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
 )
 
 // MockAgentService is a mock implementation of AgentService interface.
@@ -24,6 +25,11 @@ type MockAgentService struct {
 	GetWorkFn            func(agentID string) ([]domain.Job, error)
 	GetWorkWithTargetsFn func(agentID string) ([]domain.WorkItem, error)
 	UpdateJobStatusFn    func(agentID string, jobID string, status string, errMsg string) error
+	// I-004: soft-retirement hooks. Tests that don't set these receive nil
+	// results and nil errors, which mirrors the safest default (no-op) for
+	// unrelated suites that mock only the legacy surface.
+	RetireAgentFn        func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error)
+	ListRetiredAgentsFn  func(page, perPage int) ([]domain.Agent, int64, error)
 }
 
 func (m *MockAgentService) ListAgents(_ context.Context, page, perPage int) ([]domain.Agent, int64, error) {
@@ -96,6 +102,25 @@ func (m *MockAgentService) UpdateJobStatus(_ context.Context, agentID string, jo
 	return nil
 }
 
+// RetireAgent is the I-004 soft-retirement entrypoint. Tests that don't set
+// RetireAgentFn get a nil result + nil error, which is a no-op response that
+// lets unrelated suites compile without caring about the retirement surface.
+func (m *MockAgentService) RetireAgent(_ context.Context, agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+	if m.RetireAgentFn != nil {
+		return m.RetireAgentFn(agentID, actor, force, reason)
+	}
+	return nil, nil
+}
+
+// ListRetiredAgents returns retired rows for the retired-agents tab / audit
+// views. Same zero-value default as RetireAgent for unrelated tests.
+func (m *MockAgentService) ListRetiredAgents(_ context.Context, page, perPage int) ([]domain.Agent, int64, error) {
+	if m.ListRetiredAgentsFn != nil {
+		return m.ListRetiredAgentsFn(page, perPage)
+	}
+	return nil, 0, nil
+}
+
 // Test ListAgents - success case
 func TestListAgents_Success(t *testing.T) {
 	now := time.Now()
@@ -868,3 +893,161 @@ func TestAgentReportJobStatus_ServiceError(t *testing.T) {
 func stringPtr(s string) *string {
 	return &s
 }
+
+// G-2 (P1): cat-s5-apikey_leak audit closure tests. Pre-G-2,
+// Agent.APIKeyHash was tagged `json:"api_key_hash"` and shipped on
+// every wire surface that returned domain.Agent. Post-G-2 the tag is
+// "-" and Agent.MarshalJSON enforces redaction via a marshal-time copy
+// (see internal/domain/connector_test.go for the type-level pin). These
+// four tests are the wire-shape contract — they capture the actual HTTP
+// response body via httptest and assert the credential-derivative hash
+// is absent.
+//
+// One sentinel value (g2HandlerLeakSentinel) flows through every fixture
+// so a single grep over a failing test's output identifies the leak
+// surface immediately.
+const g2HandlerLeakSentinel = "sha256:LEAKED-CREDENTIAL-DERIVATIVE-HANDLER-SENTINEL"
+
+func TestListAgents_DoesNotLeakAPIKeyHash(t *testing.T) {
+	now := time.Now()
+	mock := &MockAgentService{
+		ListAgentsFn: func(page, perPage int) ([]domain.Agent, int64, error) {
+			return []domain.Agent{
+				{ID: "a-1", Name: "agent-one", Hostname: "host-1",
+					Status: domain.AgentStatusOnline, RegisteredAt: now,
+					APIKeyHash: g2HandlerLeakSentinel + "-1"},
+				{ID: "a-2", Name: "agent-two", Hostname: "host-2",
+					Status: domain.AgentStatusOnline, RegisteredAt: now,
+					APIKeyHash: g2HandlerLeakSentinel + "-2"},
+			}, 2, nil
+		},
+	}
+	h := NewAgentHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/agents?page=1&per_page=50", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+	h.ListAgents(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("ListAgents status = %d, want 200", w.Code)
+	}
+	body := w.Body.String()
+	if bytes.Contains([]byte(body), []byte("api_key_hash")) {
+		t.Errorf("ListAgents response leaked \"api_key_hash\" key (G-2 regressed):\n%s", body)
+	}
+	if bytes.Contains([]byte(body), []byte(g2HandlerLeakSentinel)) {
+		t.Errorf("ListAgents response leaked sentinel %q:\n%s", g2HandlerLeakSentinel, body)
+	}
+	// Sanity: the non-leaked fields ARE present (handler did serve real data).
+	for _, want := range []string{"a-1", "a-2", "agent-one", "agent-two"} {
+		if !bytes.Contains([]byte(body), []byte(want)) {
+			t.Errorf("ListAgents response missing expected field %q (handler may not be serving data):\n%s", want, body)
+		}
+	}
+}
+
+func TestGetAgent_DoesNotLeakAPIKeyHash(t *testing.T) {
+	now := time.Now()
+	mock := &MockAgentService{
+		GetAgentFn: func(id string) (*domain.Agent, error) {
+			return &domain.Agent{
+				ID: id, Name: "single-agent", Hostname: "single.host",
+				Status: domain.AgentStatusOnline, RegisteredAt: now,
+				APIKeyHash: g2HandlerLeakSentinel,
+			}, nil
+		},
+	}
+	h := NewAgentHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/agents/a-prod-001", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+	h.GetAgent(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("GetAgent status = %d, want 200, body=%s", w.Code, w.Body.String())
+	}
+	body := w.Body.String()
+	if bytes.Contains([]byte(body), []byte("api_key_hash")) {
+		t.Errorf("GetAgent response leaked \"api_key_hash\" key:\n%s", body)
+	}
+	if bytes.Contains([]byte(body), []byte(g2HandlerLeakSentinel)) {
+		t.Errorf("GetAgent response leaked sentinel:\n%s", body)
+	}
+	if !bytes.Contains([]byte(body), []byte("single-agent")) {
+		t.Errorf("GetAgent response missing the agent name (handler may not be serving data):\n%s", body)
+	}
+}
+
+func TestRegisterAgent_DoesNotLeakAPIKeyHash(t *testing.T) {
+	// Registration is the most likely path for a freshly-hashed key to
+	// leak: the service mints a new APIKeyHash inside RegisterAgent
+	// (service/agent.go:405) and the handler returns the agent struct
+	// verbatim. Pin that the redaction holds even on a "freshly created"
+	// agent payload.
+	now := time.Now()
+	mock := &MockAgentService{
+		RegisterAgentFn: func(in domain.Agent) (*domain.Agent, error) {
+			return &domain.Agent{
+				ID: "agent-new", Name: in.Name, Hostname: in.Hostname,
+				Status: domain.AgentStatusOnline, RegisteredAt: now,
+				APIKeyHash: g2HandlerLeakSentinel,
+			}, nil
+		},
+	}
+	h := NewAgentHandler(mock)
+	body := bytes.NewBufferString(`{"name":"freshly-registered","hostname":"new.host"}`)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/agents", body)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+	h.RegisterAgent(w, req)
+
+	if w.Code != http.StatusCreated {
+		t.Fatalf("RegisterAgent status = %d, want 201, body=%s", w.Code, w.Body.String())
+	}
+	respBody := w.Body.String()
+	if bytes.Contains([]byte(respBody), []byte("api_key_hash")) {
+		t.Errorf("RegisterAgent response leaked \"api_key_hash\" key:\n%s", respBody)
+	}
+	if bytes.Contains([]byte(respBody), []byte(g2HandlerLeakSentinel)) {
+		t.Errorf("RegisterAgent response leaked sentinel:\n%s", respBody)
+	}
+	if !bytes.Contains([]byte(respBody), []byte("agent-new")) {
+		t.Errorf("RegisterAgent response missing the new agent ID (handler may not be serving data):\n%s", respBody)
+	}
+}
+
+func TestListRetiredAgents_DoesNotLeakAPIKeyHash(t *testing.T) {
+	// I-004 surface — separate handler from ListAgents; same leak risk.
+	now := time.Now()
+	retiredAt := now.Add(-1 * time.Hour)
+	reason := "test cascade"
+	mock := &MockAgentService{
+		ListRetiredAgentsFn: func(page, perPage int) ([]domain.Agent, int64, error) {
+			return []domain.Agent{
+				{ID: "ret-1", Name: "retired-one", Hostname: "host-r1",
+					Status: domain.AgentStatusOffline, RegisteredAt: now,
+					RetiredAt: &retiredAt, RetiredReason: &reason,
+					APIKeyHash: g2HandlerLeakSentinel},
+			}, 1, nil
+		},
+	}
+	h := NewAgentHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/agents/retired?page=1&per_page=50", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+	h.ListRetiredAgents(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("ListRetiredAgents status = %d, want 200, body=%s", w.Code, w.Body.String())
+	}
+	body := w.Body.String()
+	if bytes.Contains([]byte(body), []byte("api_key_hash")) {
+		t.Errorf("ListRetiredAgents response leaked \"api_key_hash\" key:\n%s", body)
+	}
+	if bytes.Contains([]byte(body), []byte(g2HandlerLeakSentinel)) {
+		t.Errorf("ListRetiredAgents response leaked sentinel:\n%s", body)
+	}
+	if !bytes.Contains([]byte(body), []byte("ret-1")) {
+		t.Errorf("ListRetiredAgents response missing the retired agent ID:\n%s", body)
+	}
+}

internal/api/handler/agent_retire_handler_test.go

@@ -0,0 +1,393 @@
+package handler
+
+import (
+	"context"
+	"encoding/json"
+	"errors"
+	"net/http"
+	"net/http/httptest"
+	"testing"
+	"time"
+
+	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
+)
+
+// agentRetireTestSetup builds an AgentHandler with a mock AgentService whose
+// RetireAgent / ListRetiredAgents / Heartbeat behavior is driven by the
+// returned mock. Keeps every I-004 handler test self-contained so a single
+// failing assertion can't cascade through a shared fixture.
+func agentRetireTestSetup() (*MockAgentService, AgentHandler) {
+	mock := &MockAgentService{}
+	handler := NewAgentHandler(mock)
+	return mock, handler
+}
+
+// TestRetireAgentHandler_Success_200 pins the happy-path contract for the
+// soft-retirement HTTP surface: DELETE /api/v1/agents/{id} with no dependency
+// fallout returns 200 OK and a JSON body echoing retirement metadata
+// (retired_at timestamp, already_retired=false, cascade=false, zero counts).
+// Operators building dashboards parse these fields; keep the shape stable.
+func TestRetireAgentHandler_Success_200(t *testing.T) {
+	retiredAt := time.Date(2026, 4, 18, 12, 0, 0, 0, time.UTC)
+	mock, handler := agentRetireTestSetup()
+	mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+		if agentID != "a-prod-001" {
+			t.Fatalf("retire handler received agentID=%q want a-prod-001", agentID)
+		}
+		if force {
+			t.Fatalf("retire handler set force=true unexpectedly; default path must be force=false")
+		}
+		return &service.AgentRetirementResult{
+			AlreadyRetired: false,
+			Cascade:        false,
+			RetiredAt:      retiredAt,
+			Counts:         domain.AgentDependencyCounts{},
+		}, nil
+	}
+
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/agents/a-prod-001", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RetireAgent(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("status=%d body=%s want 200", w.Code, w.Body.String())
+	}
+
+	var body struct {
+		RetiredAt      time.Time                     `json:"retired_at"`
+		AlreadyRetired bool                          `json:"already_retired"`
+		Cascade        bool                          `json:"cascade"`
+		Counts         domain.AgentDependencyCounts  `json:"counts"`
+	}
+	if err := json.NewDecoder(w.Body).Decode(&body); err != nil {
+		t.Fatalf("decode 200 body: %v", err)
+	}
+	if !body.RetiredAt.Equal(retiredAt) {
+		t.Errorf("retired_at=%v want %v", body.RetiredAt, retiredAt)
+	}
+	if body.AlreadyRetired {
+		t.Errorf("already_retired=true want false on clean retire")
+	}
+	if body.Cascade {
+		t.Errorf("cascade=true want false on clean retire")
+	}
+}
+
+// TestRetireAgentHandler_AlreadyRetired_204 covers the idempotent contract: a
+// retire call against an already-retired agent completes with 204 No Content
+// (no body). This lets operators safely re-issue the DELETE after a network
+// blip without fearing duplicate audit events or state mutations.
+func TestRetireAgentHandler_AlreadyRetired_204(t *testing.T) {
+	mock, handler := agentRetireTestSetup()
+	past := time.Now().Add(-24 * time.Hour)
+	mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+		return &service.AgentRetirementResult{
+			AlreadyRetired: true,
+			Cascade:        false,
+			RetiredAt:      past,
+			Counts:         domain.AgentDependencyCounts{},
+		}, nil
+	}
+
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/agents/a-prod-001", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RetireAgent(w, req)
+
+	if w.Code != http.StatusNoContent {
+		t.Fatalf("status=%d body=%s want 204", w.Code, w.Body.String())
+	}
+	// 204 No Content must have zero body. If anything leaks through, downstream
+	// clients (curl scripts, dashboards) break.
+	if w.Body.Len() != 0 {
+		t.Errorf("204 body=%q want empty", w.Body.String())
+	}
+}
+
+// TestRetireAgentHandler_Sentinel_403 covers the hard guard against retiring
+// any of the four sentinel agents that back discovery sources and the
+// network scanner. These IDs are reserved; the handler must surface the
+// service-layer ErrAgentIsSentinel as 403 Forbidden regardless of force/reason
+// because no operator intent can legitimately retire them.
+func TestRetireAgentHandler_Sentinel_403(t *testing.T) {
+	sentinels := []string{"server-scanner", "cloud-aws-sm", "cloud-azure-kv", "cloud-gcp-sm"}
+	for _, id := range sentinels {
+		t.Run(id, func(t *testing.T) {
+			mock, handler := agentRetireTestSetup()
+			mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+				return nil, service.ErrAgentIsSentinel
+			}
+
+			req := httptest.NewRequest(http.MethodDelete, "/api/v1/agents/"+id, nil)
+			req = req.WithContext(contextWithRequestID())
+			w := httptest.NewRecorder()
+
+			handler.RetireAgent(w, req)
+
+			if w.Code != http.StatusForbidden {
+				t.Fatalf("sentinel %q status=%d body=%s want 403", id, w.Code, w.Body.String())
+			}
+		})
+	}
+}
+
+// TestRetireAgentHandler_NotFound_404 covers the lookup-miss path. Service
+// returns a not-found error; handler maps to 404. Keeping the error
+// discrimination at the service layer (sentinel errors.Is) rather than string
+// matching is the whole point of wrapping.
+func TestRetireAgentHandler_NotFound_404(t *testing.T) {
+	mock, handler := agentRetireTestSetup()
+	mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+		return nil, errors.New("agent not found")
+	}
+
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/agents/unknown-id", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RetireAgent(w, req)
+
+	if w.Code != http.StatusNotFound {
+		t.Fatalf("status=%d body=%s want 404", w.Code, w.Body.String())
+	}
+}
+
+// TestRetireAgentHandler_Blocked_409_WithCounts covers the preflight-blocked
+// path. Service returns *BlockedByDependenciesError wrapping
+// ErrBlockedByDependencies; handler unwraps via errors.As, maps to 409, and
+// MUST include the counts in the response body so operators know what's
+// blocking them. Without counts the 409 is useless — the operator has to
+// guess which downstream dependency is holding up the retirement.
+func TestRetireAgentHandler_Blocked_409_WithCounts(t *testing.T) {
+	mock, handler := agentRetireTestSetup()
+	blockCounts := domain.AgentDependencyCounts{
+		ActiveTargets:      3,
+		ActiveCertificates: 7,
+		PendingJobs:        2,
+	}
+	mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+		return nil, &service.BlockedByDependenciesError{Counts: blockCounts}
+	}
+
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/agents/a-prod-001", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RetireAgent(w, req)
+
+	if w.Code != http.StatusConflict {
+		t.Fatalf("status=%d body=%s want 409", w.Code, w.Body.String())
+	}
+
+	var body struct {
+		Error   string                       `json:"error"`
+		Message string                       `json:"message"`
+		Counts  domain.AgentDependencyCounts `json:"counts"`
+	}
+	if err := json.NewDecoder(w.Body).Decode(&body); err != nil {
+		t.Fatalf("decode 409 body: %v", err)
+	}
+	if body.Counts.ActiveTargets != 3 {
+		t.Errorf("counts.active_targets=%d want 3", body.Counts.ActiveTargets)
+	}
+	if body.Counts.ActiveCertificates != 7 {
+		t.Errorf("counts.active_certificates=%d want 7", body.Counts.ActiveCertificates)
+	}
+	if body.Counts.PendingJobs != 2 {
+		t.Errorf("counts.pending_jobs=%d want 2", body.Counts.PendingJobs)
+	}
+	if body.Message == "" {
+		t.Errorf("409 body missing human-readable message; operators need guidance")
+	}
+}
+
+// TestRetireAgentHandler_Force_NoReason_400 covers the force-escape-hatch
+// guardrail: force=true without a non-empty reason must be rejected at the
+// handler seam BEFORE the service performs any DB work, because a
+// reason-less cascade is unauditable. Service returns ErrForceReasonRequired;
+// handler maps to 400.
+func TestRetireAgentHandler_Force_NoReason_400(t *testing.T) {
+	mock, handler := agentRetireTestSetup()
+	mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+		if !force {
+			t.Fatalf("handler did not forward force=true; force query param was dropped")
+		}
+		if reason != "" {
+			t.Fatalf("handler passed reason=%q; empty reason must reach service for error path", reason)
+		}
+		return nil, service.ErrForceReasonRequired
+	}
+
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/agents/a-prod-001?force=true", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RetireAgent(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("status=%d body=%s want 400", w.Code, w.Body.String())
+	}
+}
+
+// TestRetireAgentHandler_ForceCascade_200 covers the successful force-cascade
+// path: DELETE ?force=true&reason=... → service executes transactional
+// cascade → 200 with cascade=true and the pre-cascade counts echoed back so
+// the operator's confirmation dialog can show "I just retired N targets,
+// M certificates, K pending jobs."
+func TestRetireAgentHandler_ForceCascade_200(t *testing.T) {
+	mock, handler := agentRetireTestSetup()
+	retiredAt := time.Date(2026, 4, 18, 14, 30, 0, 0, time.UTC)
+	mock.RetireAgentFn = func(agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error) {
+		if !force {
+			t.Fatalf("handler did not forward force=true; query-param parsing broken")
+		}
+		if reason != "decommissioning rack 7" {
+			t.Fatalf("handler forwarded reason=%q want %q", reason, "decommissioning rack 7")
+		}
+		return &service.AgentRetirementResult{
+			AlreadyRetired: false,
+			Cascade:        true,
+			RetiredAt:      retiredAt,
+			Counts: domain.AgentDependencyCounts{
+				ActiveTargets:      2,
+				ActiveCertificates: 5,
+				PendingJobs:        1,
+			},
+		}, nil
+	}
+
+	url := "/api/v1/agents/a-prod-001?force=true&reason=decommissioning+rack+7"
+	req := httptest.NewRequest(http.MethodDelete, url, nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RetireAgent(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("status=%d body=%s want 200", w.Code, w.Body.String())
+	}
+
+	var body struct {
+		RetiredAt      time.Time                     `json:"retired_at"`
+		AlreadyRetired bool                          `json:"already_retired"`
+		Cascade        bool                          `json:"cascade"`
+		Counts         domain.AgentDependencyCounts  `json:"counts"`
+	}
+	if err := json.NewDecoder(w.Body).Decode(&body); err != nil {
+		t.Fatalf("decode force-cascade 200 body: %v", err)
+	}
+	if !body.Cascade {
+		t.Errorf("cascade=false want true on ?force=true successful retire")
+	}
+	if body.Counts.ActiveTargets != 2 || body.Counts.ActiveCertificates != 5 || body.Counts.PendingJobs != 1 {
+		t.Errorf("counts=%+v want {ActiveTargets:2 ActiveCertificates:5 PendingJobs:1}", body.Counts)
+	}
+}
+
+// TestHeartbeatHandler_RetiredAgent_410 covers the agent-shutdown signal. A
+// retired agent that is still polling must be told its identity is gone
+// (410 Gone) rather than offered the normal 200 "recorded" response.
+// cmd/agent treats 410 as a terminal signal and exits rather than looping
+// forever against a decommissioned identity. Service returns ErrAgentRetired;
+// handler maps to 410.
+func TestHeartbeatHandler_RetiredAgent_410(t *testing.T) {
+	mock, handler := agentRetireTestSetup()
+	mock.HeartbeatFn = func(agentID string, metadata *domain.AgentMetadata) error {
+		return service.ErrAgentRetired
+	}
+
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/agents/a-prod-001/heartbeat", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.Heartbeat(w, req)
+
+	if w.Code != http.StatusGone {
+		t.Fatalf("heartbeat(retired) status=%d body=%s want 410", w.Code, w.Body.String())
+	}
+}
+
+// TestListRetiredAgentsHandler_Success covers the audit/forensics-facing
+// endpoint GET /api/v1/agents/retired. Returns a paged list of retired rows
+// alongside total count so the GUI can render a "Retired Agents" tab with
+// pagination. Default listing (GET /agents) hides retired rows; this is the
+// opt-in surface for them.
+func TestListRetiredAgentsHandler_Success(t *testing.T) {
+	past := time.Now().Add(-48 * time.Hour)
+	reason := "old hardware"
+	retired := []domain.Agent{
+		{
+			ID:            "agent-retired-01",
+			Name:          "decom-01",
+			Hostname:      "server-old",
+			Status:        domain.AgentStatusOffline,
+			RegisteredAt:  past,
+			RetiredAt:     &past,
+			RetiredReason: &reason,
+		},
+	}
+
+	mock, handler := agentRetireTestSetup()
+	mock.ListRetiredAgentsFn = func(page, perPage int) ([]domain.Agent, int64, error) {
+		if page != 1 || perPage != 50 {
+			t.Fatalf("ListRetired handler received page=%d perPage=%d want 1/50 defaults", page, perPage)
+		}
+		return retired, 1, nil
+	}
+
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/agents/retired", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.ListRetiredAgents(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("status=%d body=%s want 200", w.Code, w.Body.String())
+	}
+
+	var response PagedResponse
+	if err := json.NewDecoder(w.Body).Decode(&response); err != nil {
+		t.Fatalf("decode list-retired body: %v", err)
+	}
+	if response.Total != 1 {
+		t.Errorf("total=%d want 1", response.Total)
+	}
+}
+
+// TestRetireAgentHandler_MethodNotAllowed covers defense-in-depth: only
+// DELETE is valid on /api/v1/agents/{id} for retirement. Using POST/PUT/PATCH
+// must be rejected with 405 so misconfigured callers don't accidentally
+// trigger retirement via a wrong-method request.
+func TestRetireAgentHandler_MethodNotAllowed(t *testing.T) {
+	_, handler := agentRetireTestSetup()
+
+	for _, method := range []string{http.MethodPost, http.MethodPut, http.MethodPatch} {
+		t.Run(method, func(t *testing.T) {
+			req := httptest.NewRequest(method, "/api/v1/agents/a-prod-001", nil)
+			req = req.WithContext(contextWithRequestID())
+			w := httptest.NewRecorder()
+
+			handler.RetireAgent(w, req)
+
+			if w.Code != http.StatusMethodNotAllowed {
+				t.Fatalf("method=%s status=%d want 405", method, w.Code)
+			}
+		})
+	}
+}
+
+// Compile-time asserts: the mock must satisfy the handler's AgentService
+// interface. Red state: this fails until the interface grows RetireAgent +
+// ListRetiredAgents. Once Phase 2b adds those methods to AgentService, this
+// assertion goes green along with every test above.
+var _ AgentService = (*MockAgentService)(nil)
+
+// Unused-import suppressor for context — the package-level tests already
+// pull context from agent_handler_test.go, but leaving this here documents
+// that the mock methods receive context.Context values even though this
+// file's tests don't construct them directly (they ride on httptest.NewRequest).
+var _ = context.Background

internal/api/handler/agents.go

@@ -3,16 +3,24 @@ package handler
 import (
 	"context"
 	"encoding/json"
+	"errors"
 	"log/slog"
 	"net/http"
 	"strconv"
 	"strings"
+	"time"
 
 	"github.com/shankar0123/certctl/internal/api/middleware"
 	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
 )
 
 // AgentService defines the service interface for agent operations.
+//
+// I-004 expansion: RetireAgent + ListRetiredAgents back the soft-retirement
+// surface. The handler depends on the service-package's AgentRetirementResult
+// and BlockedByDependenciesError types for result shape + errors.As unwrap,
+// which is why this file imports internal/service.
 type AgentService interface {
 	ListAgents(ctx context.Context, page, perPage int) ([]domain.Agent, int64, error)
 	GetAgent(ctx context.Context, id string) (*domain.Agent, error)
@@ -24,6 +32,10 @@ type AgentService interface {
 	GetWork(ctx context.Context, agentID string) ([]domain.Job, error)
 	GetWorkWithTargets(ctx context.Context, agentID string) ([]domain.WorkItem, error)
 	UpdateJobStatus(ctx context.Context, agentID string, jobID string, status string, errMsg string) error
+	// I-004 soft-retirement API. Both default to no-op (nil result / nil error)
+	// in mocks that don't override them — handler tests opt in per suite.
+	RetireAgent(ctx context.Context, agentID, actor string, force bool, reason string) (*service.AgentRetirementResult, error)
+	ListRetiredAgents(ctx context.Context, page, perPage int) ([]domain.Agent, int64, error)
 }
 
 // AgentHandler handles HTTP requests for agent operations.
@@ -190,6 +202,15 @@ func (h AgentHandler) Heartbeat(w http.ResponseWriter, r *http.Request) {
 	}
 
 	if err := h.svc.Heartbeat(r.Context(), agentID, metadata); err != nil {
+		// I-004: a retired agent still polling must receive 410 Gone so
+		// cmd/agent detects the terminal signal and shuts down cleanly
+		// instead of looping forever against a decommissioned identity.
+		// Check this FIRST — before "not found" string matching — so the
+		// retired-path is never masked by a sibling error branch.
+		if errors.Is(err, service.ErrAgentRetired) {
+			ErrorWithRequestID(w, http.StatusGone, "Agent has been retired", requestID)
+			return
+		}
 		if strings.Contains(err.Error(), "not found") {
 			ErrorWithRequestID(w, http.StatusNotFound, "Agent not found", requestID)
 			return
@@ -376,3 +397,181 @@ func (h AgentHandler) AgentReportJobStatus(w http.ResponseWriter, r *http.Reques
 		"status": "updated",
 	})
 }
+
+// RetireAgent executes the I-004 soft-retirement surface.
+// DELETE /api/v1/agents/{id}[?force=true&reason=...]
+//
+// Contract (pinned by agent_retire_handler_test.go):
+//
+//	405  any method other than DELETE
+//	200  clean retire (body: retired_at, already_retired=false, cascade=false, counts=0s)
+//	200  force-cascade retire (body: cascade=true, counts=pre-cascade snapshot)
+//	204  idempotent retire of an already-retired agent (NO body — downstream
+//	     clients that tee responses into dashboards break on spurious bodies)
+//	400  force=true without a non-empty reason (ErrForceReasonRequired)
+//	403  one of the four reserved sentinel IDs (ErrAgentIsSentinel)
+//	404  agent does not exist ("not found" string match, kept for compat with
+//	     repo error strings; sentinel checks run first so they never mask)
+//	409  blocked by preflight counts (*BlockedByDependenciesError) — body
+//	     carries the per-bucket counts so the operator UI can tell the
+//	     human which downstream dependency is holding up the retirement,
+//	     rather than forcing them to re-run the DELETE with ?force=true
+//	     and guess
+//	500  anything else
+//
+// The 409 body intentionally does NOT go through ErrorWithRequestID because
+// that helper's ErrorResponse shape has no `counts` field — we inline-marshal
+// a custom body instead. Keeping this shape stable is important: the GUI
+// pattern is "show the 409 dialog, list the N targets / M certs / K jobs
+// blocking, let the operator retire them first or tick the force checkbox."
+func (h AgentHandler) RetireAgent(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodDelete {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	// Extract {id} from /api/v1/agents/{id}. Mirror GetAgent's pattern so
+	// the path parser is identical across the agent handler surface and a
+	// future refactor can extract it once without introducing drift.
+	rawID := strings.TrimPrefix(r.URL.Path, "/api/v1/agents/")
+	parts := strings.Split(rawID, "/")
+	if len(parts) == 0 || parts[0] == "" {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Agent ID is required", requestID)
+		return
+	}
+	id := parts[0]
+
+	// Parse optional force + reason. A missing `force` param is treated as
+	// force=false (the default, safe path); anything strconv.ParseBool rejects
+	// is also force=false so a malformed query can never silently enable the
+	// cascade. The reason string is passed through verbatim — the service
+	// owns the "force=true requires reason" rule.
+	query := r.URL.Query()
+	force := false
+	if fv := query.Get("force"); fv != "" {
+		if parsed, err := strconv.ParseBool(fv); err == nil {
+			force = parsed
+		}
+	}
+	reason := query.Get("reason")
+
+	actor := resolveActor(r.Context())
+
+	result, err := h.svc.RetireAgent(r.Context(), id, actor, force, reason)
+	if err != nil {
+		// Sentinel + typed-error checks run BEFORE string matching on "not
+		// found" so a repo error that happens to contain those words can
+		// never mask a structural refusal (403/400/409). Order matters.
+		if errors.Is(err, service.ErrAgentIsSentinel) {
+			ErrorWithRequestID(w, http.StatusForbidden, "Agent is a reserved sentinel and cannot be retired", requestID)
+			return
+		}
+		if errors.Is(err, service.ErrForceReasonRequired) {
+			ErrorWithRequestID(w, http.StatusBadRequest, "force=true requires a non-empty reason", requestID)
+			return
+		}
+		var blocked *service.BlockedByDependenciesError
+		if errors.As(err, &blocked) {
+			// Custom 409 body with per-bucket counts. ErrorResponse has no
+			// `counts` field, so we marshal a bespoke struct instead.
+			// Keep `error`/`message`/`counts` as the stable shape — any
+			// dashboard parsing this relies on those three keys.
+			body := struct {
+				Error   string                       `json:"error"`
+				Message string                       `json:"message"`
+				Counts  domain.AgentDependencyCounts `json:"counts"`
+			}{
+				Error: "blocked_by_dependencies",
+				Message: "Agent has active downstream dependencies. Retire or reassign them " +
+					"first, or re-run with ?force=true&reason=... to cascade.",
+				Counts: blocked.Counts,
+			}
+			JSON(w, http.StatusConflict, body)
+			return
+		}
+		if strings.Contains(err.Error(), "not found") {
+			ErrorWithRequestID(w, http.StatusNotFound, "Agent not found", requestID)
+			return
+		}
+		slog.Error("RetireAgent failed", "agent_id", id, "error", err.Error())
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to retire agent", requestID)
+		return
+	}
+
+	// Idempotent retire: the agent was already retired, so we return 204 No
+	// Content with a ZERO-length body. The Red contract (test line 106) fails
+	// if even a trailing newline leaks into the response. WriteHeader alone
+	// emits the status without invoking the JSON encoder.
+	if result.AlreadyRetired {
+		w.WriteHeader(http.StatusNoContent)
+		return
+	}
+
+	// Clean retire (force=false) or successful cascade (force=true). Body
+	// shape pinned by Red contract: retired_at, already_retired, cascade,
+	// counts. Omitempty is deliberately NOT used — operators parsing the
+	// response expect every field to always be present.
+	JSON(w, http.StatusOK, struct {
+		RetiredAt      time.Time                    `json:"retired_at"`
+		AlreadyRetired bool                         `json:"already_retired"`
+		Cascade        bool                         `json:"cascade"`
+		Counts         domain.AgentDependencyCounts `json:"counts"`
+	}{
+		RetiredAt:      result.RetiredAt,
+		AlreadyRetired: result.AlreadyRetired,
+		Cascade:        result.Cascade,
+		Counts:         result.Counts,
+	})
+}
+
+// ListRetiredAgents returns the opt-in listing of retired agents for the
+// operator UI's "Retired" tab and for audit/forensics workflows.
+// GET /api/v1/agents/retired?page=1&per_page=50
+//
+// The default ListAgents handler hides retired rows; this is the dedicated
+// surface for reading them back. Pagination defaults match ListAgents so
+// the GUI can reuse the same query hook (page=1, per_page=50, cap 500).
+//
+// Go 1.22's enhanced ServeMux routes `/agents/retired` to this handler via
+// the literal-beats-pattern-var precedence rule (literal `retired` wins over
+// `{id}` in the sibling GET /api/v1/agents/{id} route), so both entries can
+// coexist without conflict. If that precedence ever regresses, the failure
+// mode is TestListRetiredAgentsHandler_Success blowing up with a 404 — which
+// is the fast signal we want.
+func (h AgentHandler) ListRetiredAgents(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodGet {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	page := 1
+	perPage := 50
+	query := r.URL.Query()
+	if p := query.Get("page"); p != "" {
+		if parsed, err := strconv.Atoi(p); err == nil && parsed > 0 {
+			page = parsed
+		}
+	}
+	if pp := query.Get("per_page"); pp != "" {
+		if parsed, err := strconv.Atoi(pp); err == nil && parsed > 0 && parsed <= 500 {
+			perPage = parsed
+		}
+	}
+
+	agents, total, err := h.svc.ListRetiredAgents(r.Context(), page, perPage)
+	if err != nil {
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to list retired agents", requestID)
+		return
+	}
+
+	JSON(w, http.StatusOK, PagedResponse{
+		Data:    agents,
+		Total:   total,
+		Page:    page,
+		PerPage: perPage,
+	})
+}

internal/api/handler/bulk_revocation.go

@@ -37,6 +37,11 @@ type bulkRevokeRequest struct {
 
 // BulkRevoke handles bulk certificate revocation.
 // POST /api/v1/certificates/bulk-revoke
+//
+// M-003: admin-only. Bulk revocation is a fleet-scale destructive operation —
+// a non-admin caller must not be able to invalidate certificates across
+// profiles/owners/agents. The gate is enforced here (before body parsing) so a
+// non-admin never sees its request criteria evaluated.
 func (h BulkRevocationHandler) BulkRevoke(w http.ResponseWriter, r *http.Request) {
 	if r.Method != http.MethodPost {
 		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
@@ -45,6 +50,16 @@ func (h BulkRevocationHandler) BulkRevoke(w http.ResponseWriter, r *http.Request
 
 	requestID := middleware.GetRequestID(r.Context())
 
+	// M-003: admin-only gate. Non-admin callers are rejected before any
+	// criteria/body processing to avoid leaking validation behavior to
+	// unauthorized actors.
+	if !middleware.IsAdmin(r.Context()) {
+		ErrorWithRequestID(w, http.StatusForbidden,
+			"Bulk revocation requires admin privileges",
+			requestID)
+		return
+	}
+
 	var req bulkRevokeRequest
 	if err := json.NewDecoder(r.Body).Decode(&req); err != nil {
 		ErrorWithRequestID(w, http.StatusBadRequest, "Invalid request body", requestID)
@@ -78,11 +93,8 @@ func (h BulkRevocationHandler) BulkRevoke(w http.ResponseWriter, r *http.Request
 		return
 	}
 
-	// Extract actor from auth context
-	actor := "api"
-	if user, ok := middleware.GetUser(r.Context()); ok && user != "" {
-		actor = user
-	}
+	// Extract actor from auth context (M-002: named-key identity → audit trail)
+	actor := resolveActor(r.Context())
 
 	result, err := h.svc.BulkRevoke(r.Context(), criteria, req.Reason, actor)
 	if err != nil {

internal/api/handler/bulk_revocation_handler_test.go

@@ -7,8 +7,10 @@ import (
 	"fmt"
 	"net/http"
 	"net/http/httptest"
+	"strings"
 	"testing"
 
+	"github.com/shankar0123/certctl/internal/api/middleware"
 	"github.com/shankar0123/certctl/internal/domain"
 )
 
@@ -24,6 +26,15 @@ func (m *mockBulkRevocationService) BulkRevoke(ctx context.Context, criteria dom
 	return &domain.BulkRevocationResult{}, nil
 }
 
+// adminContext returns a context carrying the admin flag, mimicking what the
+// auth middleware sets for named-key callers whose entry is admin-tagged.
+// M-003: bulk revocation handler requires admin context to reach the service.
+func adminContext() context.Context {
+	ctx := context.WithValue(context.Background(), middleware.RequestIDKey{}, "test-request-id-bulk")
+	ctx = context.WithValue(ctx, middleware.AdminKey{}, true)
+	return ctx
+}
+
 func TestBulkRevoke_Success_WithIDs(t *testing.T) {
 	svc := &mockBulkRevocationService{
 		BulkRevokeFn: func(ctx context.Context, criteria domain.BulkRevocationCriteria, reason string, actor string) (*domain.BulkRevocationResult, error) {
@@ -44,6 +55,7 @@ func TestBulkRevoke_Success_WithIDs(t *testing.T) {
 	body := `{"reason":"keyCompromise","certificate_ids":["mc-1","mc-2"]}`
 	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
 	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(adminContext())
 	w := httptest.NewRecorder()
 
 	h.BulkRevoke(w, req)
@@ -82,6 +94,7 @@ func TestBulkRevoke_Success_WithProfile(t *testing.T) {
 	body := `{"reason":"keyCompromise","profile_id":"prof-tls"}`
 	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
 	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(adminContext())
 	w := httptest.NewRecorder()
 
 	h.BulkRevoke(w, req)
@@ -97,6 +110,7 @@ func TestBulkRevoke_MissingReason_400(t *testing.T) {
 	body := `{"certificate_ids":["mc-1"]}`
 	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
 	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(adminContext())
 	w := httptest.NewRecorder()
 
 	h.BulkRevoke(w, req)
@@ -112,6 +126,7 @@ func TestBulkRevoke_EmptyCriteria_400(t *testing.T) {
 	body := `{"reason":"keyCompromise"}`
 	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
 	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(adminContext())
 	w := httptest.NewRecorder()
 
 	h.BulkRevoke(w, req)
@@ -127,6 +142,7 @@ func TestBulkRevoke_InvalidReason_400(t *testing.T) {
 	body := `{"reason":"totallyBogus","certificate_ids":["mc-1"]}`
 	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
 	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(adminContext())
 	w := httptest.NewRecorder()
 
 	h.BulkRevoke(w, req)
@@ -139,6 +155,8 @@ func TestBulkRevoke_InvalidReason_400(t *testing.T) {
 func TestBulkRevoke_MethodNotAllowed_405(t *testing.T) {
 	h := NewBulkRevocationHandler(&mockBulkRevocationService{})
 
+	// Method check fires before the admin gate, so 405 must hold even for a
+	// non-admin caller — asserting this keeps the ordering explicit.
 	req := httptest.NewRequest(http.MethodGet, "/api/v1/certificates/bulk-revoke", nil)
 	w := httptest.NewRecorder()
 
@@ -160,6 +178,7 @@ func TestBulkRevoke_ServiceError_500(t *testing.T) {
 	body := `{"reason":"keyCompromise","certificate_ids":["mc-1"]}`
 	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
 	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(adminContext())
 	w := httptest.NewRecorder()
 
 	h.BulkRevoke(w, req)
@@ -168,3 +187,103 @@ func TestBulkRevoke_ServiceError_500(t *testing.T) {
 		t.Errorf("expected 500, got %d", w.Code)
 	}
 }
+
+// --- M-003: admin-only gate on bulk revocation ---
+
+// TestBulkRevoke_NonAdmin_Returns403 is the central authorization regression
+// for M-003. A caller without an admin-tagged context must be rejected with
+// HTTP 403, regardless of how well-formed its body is, and the service layer
+// must never see the request.
+func TestBulkRevoke_NonAdmin_Returns403(t *testing.T) {
+	var serviceCalled bool
+	svc := &mockBulkRevocationService{
+		BulkRevokeFn: func(ctx context.Context, criteria domain.BulkRevocationCriteria, reason string, actor string) (*domain.BulkRevocationResult, error) {
+			serviceCalled = true
+			return &domain.BulkRevocationResult{}, nil
+		},
+	}
+	h := NewBulkRevocationHandler(svc)
+
+	// Well-formed body + well-formed reason + filter — the only thing
+	// missing is an admin-tagged context. The gate must still fire.
+	body := `{"reason":"keyCompromise","certificate_ids":["mc-1","mc-2"]}`
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
+	req.Header.Set("Content-Type", "application/json")
+	req = req.WithContext(contextWithRequestID()) // request id only, no admin flag
+	w := httptest.NewRecorder()
+
+	h.BulkRevoke(w, req)
+
+	if w.Code != http.StatusForbidden {
+		t.Fatalf("expected status 403, got %d (body=%q)", w.Code, w.Body.String())
+	}
+
+	var resp map[string]any
+	if err := json.NewDecoder(w.Body).Decode(&resp); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+	msg, _ := resp["message"].(string)
+	if !strings.Contains(strings.ToLower(msg), "admin") {
+		t.Errorf("expected message to mention admin requirement, got %q", msg)
+	}
+	if serviceCalled {
+		t.Errorf("service was invoked despite non-admin caller — gate failed open")
+	}
+}
+
+// TestBulkRevoke_AdminExplicitFalse_Returns403 pins the specific case where the
+// AdminKey exists but is set to false — e.g., a non-admin named-key caller.
+// Without this we could regress to "key missing == deny, key present == allow"
+// which would silently grant a false flag.
+func TestBulkRevoke_AdminExplicitFalse_Returns403(t *testing.T) {
+	h := NewBulkRevocationHandler(&mockBulkRevocationService{})
+
+	body := `{"reason":"keyCompromise","certificate_ids":["mc-1"]}`
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
+	req.Header.Set("Content-Type", "application/json")
+
+	ctx := context.WithValue(context.Background(), middleware.RequestIDKey{}, "test-request-id")
+	ctx = context.WithValue(ctx, middleware.AdminKey{}, false)
+	req = req.WithContext(ctx)
+	w := httptest.NewRecorder()
+
+	h.BulkRevoke(w, req)
+
+	if w.Code != http.StatusForbidden {
+		t.Fatalf("expected status 403 for admin=false, got %d", w.Code)
+	}
+}
+
+// TestBulkRevoke_AdminPermitted_ForwardsActor confirms the happy path:
+// an admin-tagged context reaches the service and the actor (from the auth
+// UserKey) is propagated through to BulkRevoke. This keeps the admin gate and
+// the M-002 actor-propagation wired together in a single regression.
+func TestBulkRevoke_AdminPermitted_ForwardsActor(t *testing.T) {
+	var capturedActor string
+	svc := &mockBulkRevocationService{
+		BulkRevokeFn: func(ctx context.Context, criteria domain.BulkRevocationCriteria, reason string, actor string) (*domain.BulkRevocationResult, error) {
+			capturedActor = actor
+			return &domain.BulkRevocationResult{TotalMatched: 1, TotalRevoked: 1}, nil
+		},
+	}
+	h := NewBulkRevocationHandler(svc)
+
+	body := `{"reason":"keyCompromise","certificate_ids":["mc-1"]}`
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates/bulk-revoke", bytes.NewBufferString(body))
+	req.Header.Set("Content-Type", "application/json")
+
+	ctx := context.WithValue(context.Background(), middleware.RequestIDKey{}, "test-request-id")
+	ctx = context.WithValue(ctx, middleware.AdminKey{}, true)
+	ctx = context.WithValue(ctx, middleware.UserKey{}, "ops-admin")
+	req = req.WithContext(ctx)
+	w := httptest.NewRecorder()
+
+	h.BulkRevoke(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200 for admin caller, got %d (body=%q)", w.Code, w.Body.String())
+	}
+	if capturedActor != "ops-admin" {
+		t.Errorf("expected actor ops-admin, got %q", capturedActor)
+	}
+}

internal/api/handler/certificate_handler_test.go

@@ -432,6 +432,66 @@ func TestCreateCertificate_ServiceError(t *testing.T) {
 	}
 }
 
+// TestCreateCertificate_MissingRequiredField_Returns400 pins the C-001 handler
+// contract: handler MUST reject a create payload that omits any of the five
+// required fields (name, common_name, owner_id, team_id, issuer_id,
+// renewal_policy_id) with HTTP 400 before the service is invoked. The mock
+// service here would succeed if called; every subtest proving 400 therefore
+// proves the handler guard fires.
+func TestCreateCertificate_MissingRequiredField_Returns400(t *testing.T) {
+	baseBody := map[string]interface{}{
+		"name":              "API Prod",
+		"common_name":       "api.example.com",
+		"owner_id":          "o-alice",
+		"team_id":           "t-platform",
+		"issuer_id":         "iss-local",
+		"renewal_policy_id": "rp-standard",
+	}
+
+	cases := []struct {
+		name         string
+		missingField string
+	}{
+		{"missing name", "name"},
+		{"missing common_name", "common_name"},
+		{"missing owner_id", "owner_id"},
+		{"missing team_id", "team_id"},
+		{"missing issuer_id", "issuer_id"},
+		{"missing renewal_policy_id", "renewal_policy_id"},
+	}
+
+	for _, tc := range cases {
+		t.Run(tc.name, func(t *testing.T) {
+			body := make(map[string]interface{}, len(baseBody))
+			for k, v := range baseBody {
+				body[k] = v
+			}
+			delete(body, tc.missingField)
+			bodyBytes, _ := json.Marshal(body)
+
+			mock := &MockCertificateService{
+				CreateCertificateFn: func(_ context.Context, cert domain.ManagedCertificate) (*domain.ManagedCertificate, error) {
+					// Would succeed if handler guard did not fire.
+					cert.ID = "mc-would-be-created"
+					return &cert, nil
+				},
+			}
+			handler := NewCertificateHandler(mock)
+
+			req := httptest.NewRequest(http.MethodPost, "/api/v1/certificates", bytes.NewReader(bodyBytes))
+			req = req.WithContext(contextWithRequestID())
+			req.Header.Set("Content-Type", "application/json")
+			w := httptest.NewRecorder()
+
+			handler.CreateCertificate(w, req)
+
+			if w.Code != http.StatusBadRequest {
+				t.Fatalf("%s: expected 400, got %d — body=%s", tc.name, w.Code, w.Body.String())
+			}
+		})
+	}
+}
+
 // Test UpdateCertificate - success case
 func TestUpdateCertificate_Success(t *testing.T) {
 	updated := &domain.ManagedCertificate{
@@ -958,127 +1018,13 @@ func TestRevokeCertificate_Handler_ServerError(t *testing.T) {
 	}
 }
 
-// === CRL Handler Tests ===
-
-func TestGetCRL_Success(t *testing.T) {
-	mock := &MockCertificateService{
-		GetRevokedCertificatesFn: func(_ context.Context) ([]*domain.CertificateRevocation, error) {
-			return []*domain.CertificateRevocation{
-				{
-					ID:            "rev-1",
-					CertificateID: "cert-1",
-					SerialNumber:  "ABC123",
-					Reason:        "keyCompromise",
-					RevokedAt:     time.Date(2026, 3, 20, 10, 0, 0, 0, time.UTC),
-				},
-				{
-					ID:            "rev-2",
-					CertificateID: "cert-2",
-					SerialNumber:  "DEF456",
-					Reason:        "superseded",
-					RevokedAt:     time.Date(2026, 3, 21, 14, 30, 0, 0, time.UTC),
-				},
-			}, nil
-		},
-	}
-
-	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/crl", nil)
-	req = req.WithContext(contextWithRequestID())
-	w := httptest.NewRecorder()
-
-	handler.GetCRL(w, req)
-
-	if w.Code != http.StatusOK {
-		t.Errorf("expected status %d, got %d", http.StatusOK, w.Code)
-	}
-
-	var resp map[string]interface{}
-	json.NewDecoder(w.Body).Decode(&resp)
-
-	if resp["version"] != float64(1) {
-		t.Errorf("expected version 1, got %v", resp["version"])
-	}
-	if resp["total"] != float64(2) {
-		t.Errorf("expected total 2, got %v", resp["total"])
-	}
-
-	entries, ok := resp["entries"].([]interface{})
-	if !ok {
-		t.Fatal("expected entries to be an array")
-	}
-	if len(entries) != 2 {
-		t.Errorf("expected 2 entries, got %d", len(entries))
-	}
-
-	entry1 := entries[0].(map[string]interface{})
-	if entry1["serial_number"] != "ABC123" {
-		t.Errorf("expected serial ABC123, got %v", entry1["serial_number"])
-	}
-	if entry1["revocation_reason"] != "keyCompromise" {
-		t.Errorf("expected reason keyCompromise, got %v", entry1["revocation_reason"])
-	}
-}
-
-func TestGetCRL_Empty(t *testing.T) {
-	mock := &MockCertificateService{
-		GetRevokedCertificatesFn: func(_ context.Context) ([]*domain.CertificateRevocation, error) {
-			return nil, nil
-		},
-	}
-
-	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/crl", nil)
-	req = req.WithContext(contextWithRequestID())
-	w := httptest.NewRecorder()
-
-	handler.GetCRL(w, req)
-
-	if w.Code != http.StatusOK {
-		t.Errorf("expected status %d, got %d", http.StatusOK, w.Code)
-	}
-
-	var resp map[string]interface{}
-	json.NewDecoder(w.Body).Decode(&resp)
-	if resp["total"] != float64(0) {
-		t.Errorf("expected total 0, got %v", resp["total"])
-	}
-}
-
-func TestGetCRL_ServiceError(t *testing.T) {
-	mock := &MockCertificateService{
-		GetRevokedCertificatesFn: func(_ context.Context) ([]*domain.CertificateRevocation, error) {
-			return nil, fmt.Errorf("revocation repository not configured")
-		},
-	}
-
-	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/crl", nil)
-	req = req.WithContext(contextWithRequestID())
-	w := httptest.NewRecorder()
-
-	handler.GetCRL(w, req)
-
-	if w.Code != http.StatusInternalServerError {
-		t.Errorf("expected status %d, got %d", http.StatusInternalServerError, w.Code)
-	}
-}
-
-func TestGetCRL_MethodNotAllowed(t *testing.T) {
-	mock := &MockCertificateService{}
-	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodPost, "/api/v1/crl", nil)
-	req = req.WithContext(contextWithRequestID())
-	w := httptest.NewRecorder()
-
-	handler.GetCRL(w, req)
-
-	if w.Code != http.StatusMethodNotAllowed {
-		t.Errorf("expected status %d, got %d", http.StatusMethodNotAllowed, w.Code)
-	}
-}
-
-// M15b: DER CRL and OCSP Handler Tests
+// === CRL and OCSP Handler Tests (RFC 5280 / RFC 6960, served under /.well-known/pki/) ===
+//
+// M-006 relocated these endpoints from /api/v1/crl* and /api/v1/ocsp/* to the
+// RFC-compliant /.well-known/pki/ namespace and deleted the non-standard JSON
+// CRL endpoint. The DER-encoded X.509 CRL (application/pkix-crl) and the
+// DER-encoded OCSP response (application/ocsp-response) are the only wire
+// formats certctl supports for revocation data.
 
 func TestGetDERCRL_Success(t *testing.T) {
 	derCRLData := []byte{0x30, 0x82, 0x01, 0x00} // Mock DER CRL bytes
@@ -1092,7 +1038,7 @@ func TestGetDERCRL_Success(t *testing.T) {
 	}
 
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/crl/iss-local", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/crl/iss-local", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1107,6 +1053,9 @@ func TestGetDERCRL_Success(t *testing.T) {
 	if len(responseBody) == 0 {
 		t.Error("expected non-empty response body")
 	}
+	if ct := w.Header().Get("Content-Type"); ct != "application/pkix-crl" {
+		t.Errorf("expected Content-Type application/pkix-crl, got %q", ct)
+	}
 }
 
 func TestGetDERCRL_IssuerNotFound(t *testing.T) {
@@ -1117,7 +1066,7 @@ func TestGetDERCRL_IssuerNotFound(t *testing.T) {
 	}
 
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/crl/nonexistent", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/crl/nonexistent", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1136,7 +1085,7 @@ func TestGetDERCRL_NotSupported(t *testing.T) {
 	}
 
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/crl/iss-acme", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/crl/iss-acme", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1151,7 +1100,7 @@ func TestGetDERCRL_NotSupported(t *testing.T) {
 func TestGetDERCRL_MethodNotAllowed(t *testing.T) {
 	mock := &MockCertificateService{}
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodPost, "/api/v1/crl/iss-local", nil)
+	req := httptest.NewRequest(http.MethodPost, "/.well-known/pki/crl/iss-local", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1174,7 +1123,7 @@ func TestHandleOCSP_Success(t *testing.T) {
 	}
 
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/ocsp/iss-local/12345", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/ocsp/iss-local/12345", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1188,12 +1137,15 @@ func TestHandleOCSP_Success(t *testing.T) {
 	if len(responseBody) == 0 {
 		t.Error("expected non-empty OCSP response body")
 	}
+	if ct := w.Header().Get("Content-Type"); ct != "application/ocsp-response" {
+		t.Errorf("expected Content-Type application/ocsp-response, got %q", ct)
+	}
 }
 
 func TestHandleOCSP_MissingSerial(t *testing.T) {
 	mock := &MockCertificateService{}
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/ocsp/iss-local/", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/ocsp/iss-local/", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1212,7 +1164,7 @@ func TestHandleOCSP_IssuerNotFound(t *testing.T) {
 	}
 
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/ocsp/nonexistent/ABC123", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/ocsp/nonexistent/ABC123", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1231,7 +1183,7 @@ func TestHandleOCSP_CertNotFound(t *testing.T) {
 	}
 
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodGet, "/api/v1/ocsp/iss-local/UNKNOWN", nil)
+	req := httptest.NewRequest(http.MethodGet, "/.well-known/pki/ocsp/iss-local/UNKNOWN", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 
@@ -1245,7 +1197,7 @@ func TestHandleOCSP_CertNotFound(t *testing.T) {
 func TestHandleOCSP_MethodNotAllowed(t *testing.T) {
 	mock := &MockCertificateService{}
 	handler := NewCertificateHandler(mock)
-	req := httptest.NewRequest(http.MethodPost, "/api/v1/ocsp/iss-local/12345", nil)
+	req := httptest.NewRequest(http.MethodPost, "/.well-known/pki/ocsp/iss-local/12345", nil)
 	req = req.WithContext(contextWithRequestID())
 	w := httptest.NewRecorder()
 

internal/api/handler/certificates.go

@@ -411,7 +411,9 @@ func (h CertificateHandler) TriggerRenewal(w http.ResponseWriter, r *http.Reques
 	}
 	certID := parts[0]
 
-	if err := h.svc.TriggerRenewal(r.Context(), certID, "api"); err != nil {
+	actor := resolveActor(r.Context())
+
+	if err := h.svc.TriggerRenewal(r.Context(), certID, actor); err != nil {
 		errMsg := err.Error()
 		if strings.Contains(errMsg, "not found") {
 			ErrorWithRequestID(w, http.StatusNotFound, "Certificate not found", requestID)
@@ -467,7 +469,9 @@ func (h CertificateHandler) TriggerDeployment(w http.ResponseWriter, r *http.Req
 		}
 	}
 
-	if err := h.svc.TriggerDeployment(r.Context(), certID, req.TargetID, "api"); err != nil {
+	actor := resolveActor(r.Context())
+
+	if err := h.svc.TriggerDeployment(r.Context(), certID, req.TargetID, actor); err != nil {
 		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to trigger deployment", requestID)
 		return
 	}
@@ -509,7 +513,9 @@ func (h CertificateHandler) RevokeCertificate(w http.ResponseWriter, r *http.Req
 		}
 	}
 
-	if err := h.svc.RevokeCertificate(r.Context(), certID, req.Reason, "api"); err != nil {
+	actor := resolveActor(r.Context())
+
+	if err := h.svc.RevokeCertificate(r.Context(), certID, req.Reason, actor); err != nil {
 		// Distinguish between client errors and server errors
 		errMsg := err.Error()
 		if strings.Contains(errMsg, "already revoked") ||
@@ -529,49 +535,12 @@ func (h CertificateHandler) RevokeCertificate(w http.ResponseWriter, r *http.Req
 	JSON(w, http.StatusOK, map[string]string{"status": "revoked"})
 }
 
-// GetCRL returns the Certificate Revocation List as structured JSON.
-// GET /api/v1/crl
-// Note: DER-encoded X.509 CRL generation (requiring CA key access) is planned for M15b
-// alongside the embedded OCSP responder. This endpoint provides the same data in JSON format.
-func (h CertificateHandler) GetCRL(w http.ResponseWriter, r *http.Request) {
-	if r.Method != http.MethodGet {
-		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
-		return
-	}
-
-	requestID := middleware.GetRequestID(r.Context())
-
-	revocations, err := h.svc.GetRevokedCertificates(r.Context())
-	if err != nil {
-		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to generate CRL", requestID)
-		return
-	}
-
-	type CRLEntry struct {
-		SerialNumber     string `json:"serial_number"`
-		RevocationDate   string `json:"revocation_date"`
-		RevocationReason string `json:"revocation_reason"`
-	}
-
-	entries := make([]CRLEntry, 0, len(revocations))
-	for _, rev := range revocations {
-		entries = append(entries, CRLEntry{
-			SerialNumber:     rev.SerialNumber,
-			RevocationDate:   rev.RevokedAt.Format("2006-01-02T15:04:05Z"),
-			RevocationReason: rev.Reason,
-		})
-	}
-
-	JSON(w, http.StatusOK, map[string]interface{}{
-		"version":      1,
-		"entries":      entries,
-		"total":        len(entries),
-		"generated_at": time.Now().UTC().Format("2006-01-02T15:04:05Z"),
-	})
-}
-
 // GetDERCRL returns a DER-encoded X.509 CRL signed by the specified issuer.
-// GET /api/v1/crl/{issuer_id}
+// GET /.well-known/pki/crl/{issuer_id}
+//
+// RFC 5280 § 5. Served unauthenticated under the /.well-known/pki/ namespace so
+// relying parties (browsers, OpenSSL, OCSP stapling sidecars) can fetch the CRL
+// without presenting certctl API credentials.
 func (h CertificateHandler) GetDERCRL(w http.ResponseWriter, r *http.Request) {
 	requestID, _ := r.Context().Value("request_id").(string)
 
@@ -580,7 +549,7 @@ func (h CertificateHandler) GetDERCRL(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 
-	issuerID := strings.TrimPrefix(r.URL.Path, "/api/v1/crl/")
+	issuerID := strings.TrimPrefix(r.URL.Path, "/.well-known/pki/crl/")
 	if issuerID == "" {
 		ErrorWithRequestID(w, http.StatusBadRequest, "Issuer ID is required", requestID)
 		return
@@ -608,8 +577,11 @@ func (h CertificateHandler) GetDERCRL(w http.ResponseWriter, r *http.Request) {
 }
 
 // HandleOCSP processes OCSP requests.
-// GET /api/v1/ocsp/{issuer_id}/{serial_hex}
-// For simplicity, use GET with path params instead of binary POST.
+// GET /.well-known/pki/ocsp/{issuer_id}/{serial_hex}
+//
+// RFC 6960. Served unauthenticated under the /.well-known/pki/ namespace. For
+// simplicity we accept GET with path params rather than the binary POST body
+// form — the response is a valid DER-encoded OCSP response either way.
 func (h CertificateHandler) HandleOCSP(w http.ResponseWriter, r *http.Request) {
 	requestID, _ := r.Context().Value("request_id").(string)
 
@@ -618,8 +590,8 @@ func (h CertificateHandler) HandleOCSP(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 
-	// Extract issuer_id and serial from path: /api/v1/ocsp/{issuer_id}/{serial_hex}
-	path := strings.TrimPrefix(r.URL.Path, "/api/v1/ocsp/")
+	// Extract issuer_id and serial from path: /.well-known/pki/ocsp/{issuer_id}/{serial_hex}
+	path := strings.TrimPrefix(r.URL.Path, "/.well-known/pki/ocsp/")
 	parts := strings.SplitN(path, "/", 2)
 	if len(parts) < 2 || parts[0] == "" || parts[1] == "" {
 		ErrorWithRequestID(w, http.StatusBadRequest, "Issuer ID and serial number are required", requestID)

internal/api/handler/digest.go

@@ -3,6 +3,7 @@ package handler
 import (
 	"context"
 	"encoding/json"
+	"log/slog"
 	"net/http"
 )
 
@@ -39,7 +40,8 @@ func (h *DigestHandler) PreviewDigest(w http.ResponseWriter, r *http.Request) {
 
 	html, err := h.service.PreviewDigest(r.Context())
 	if err != nil {
-		http.Error(w, err.Error(), http.StatusInternalServerError)
+		slog.Error("digest preview failed", "error", err.Error())
+		http.Error(w, "internal error", http.StatusInternalServerError)
 		return
 	}
 
@@ -64,9 +66,10 @@ func (h *DigestHandler) SendDigest(w http.ResponseWriter, r *http.Request) {
 	}
 
 	if err := h.service.SendDigest(r.Context()); err != nil {
+		slog.Error("digest send failed", "error", err.Error())
 		w.Header().Set("Content-Type", "application/json")
 		w.WriteHeader(http.StatusInternalServerError)
-		json.NewEncoder(w).Encode(map[string]string{"error": err.Error()})
+		json.NewEncoder(w).Encode(map[string]string{"error": "internal error"})
 		return
 	}
 

internal/api/handler/discovery.go

@@ -11,12 +11,17 @@ import (
 )
 
 // DiscoveryService defines the interface used by the discovery handler.
+// ClaimDiscovered and DismissDiscovered accept an explicit actor parameter so
+// the handler can flow the authenticated named-key identity into the audit
+// trail (M-005). Services that call these methods from non-request contexts
+// pass a descriptive sentinel (e.g., "system") or "" (which falls back to
+// "api").
 type DiscoveryService interface {
 	ProcessDiscoveryReport(ctx context.Context, report *domain.DiscoveryReport) (*domain.DiscoveryScan, error)
 	ListDiscovered(ctx context.Context, agentID, status string, page, perPage int) ([]*domain.DiscoveredCertificate, int, error)
 	GetDiscovered(ctx context.Context, id string) (*domain.DiscoveredCertificate, error)
-	ClaimDiscovered(ctx context.Context, id string, managedCertID string) error
-	DismissDiscovered(ctx context.Context, id string) error
+	ClaimDiscovered(ctx context.Context, id string, managedCertID string, actor string) error
+	DismissDiscovered(ctx context.Context, id string, actor string) error
 	ListScans(ctx context.Context, agentID string, page, perPage int) ([]*domain.DiscoveryScan, int, error)
 	GetScan(ctx context.Context, id string) (*domain.DiscoveryScan, error)
 	GetDiscoverySummary(ctx context.Context) (map[string]int, error)
@@ -142,7 +147,7 @@ func (h DiscoveryHandler) ClaimDiscovered(w http.ResponseWriter, r *http.Request
 		return
 	}
 
-	if err := h.svc.ClaimDiscovered(r.Context(), id, body.ManagedCertificateID); err != nil {
+	if err := h.svc.ClaimDiscovered(r.Context(), id, body.ManagedCertificateID, resolveActor(r.Context())); err != nil {
 		Error(w, http.StatusInternalServerError, fmt.Sprintf("failed to claim certificate: %v", err))
 		return
 	}
@@ -166,7 +171,7 @@ func (h DiscoveryHandler) DismissDiscovered(w http.ResponseWriter, r *http.Reque
 		return
 	}
 
-	if err := h.svc.DismissDiscovered(r.Context(), id); err != nil {
+	if err := h.svc.DismissDiscovered(r.Context(), id, resolveActor(r.Context())); err != nil {
 		Error(w, http.StatusInternalServerError, fmt.Sprintf("failed to dismiss certificate: %v", err))
 		return
 	}

internal/api/handler/discovery_handler_test.go

@@ -19,8 +19,8 @@ type MockDiscoveryService struct {
 	ProcessDiscoveryReportFn func(ctx context.Context, report *domain.DiscoveryReport) (*domain.DiscoveryScan, error)
 	ListDiscoveredFn         func(ctx context.Context, agentID, status string, page, perPage int) ([]*domain.DiscoveredCertificate, int, error)
 	GetDiscoveredFn          func(ctx context.Context, id string) (*domain.DiscoveredCertificate, error)
-	ClaimDiscoveredFn        func(ctx context.Context, id string, managedCertID string) error
-	DismissDiscoveredFn      func(ctx context.Context, id string) error
+	ClaimDiscoveredFn        func(ctx context.Context, id string, managedCertID string, actor string) error
+	DismissDiscoveredFn      func(ctx context.Context, id string, actor string) error
 	ListScansFn              func(ctx context.Context, agentID string, page, perPage int) ([]*domain.DiscoveryScan, int, error)
 	GetScanFn                func(ctx context.Context, id string) (*domain.DiscoveryScan, error)
 	GetDiscoverySummaryFn    func(ctx context.Context) (map[string]int, error)
@@ -47,16 +47,16 @@ func (m *MockDiscoveryService) GetDiscovered(ctx context.Context, id string) (*d
 	return nil, nil
 }
 
-func (m *MockDiscoveryService) ClaimDiscovered(ctx context.Context, id string, managedCertID string) error {
+func (m *MockDiscoveryService) ClaimDiscovered(ctx context.Context, id string, managedCertID string, actor string) error {
 	if m.ClaimDiscoveredFn != nil {
-		return m.ClaimDiscoveredFn(ctx, id, managedCertID)
+		return m.ClaimDiscoveredFn(ctx, id, managedCertID, actor)
 	}
 	return nil
 }
 
-func (m *MockDiscoveryService) DismissDiscovered(ctx context.Context, id string) error {
+func (m *MockDiscoveryService) DismissDiscovered(ctx context.Context, id string, actor string) error {
 	if m.DismissDiscoveredFn != nil {
-		return m.DismissDiscoveredFn(ctx, id)
+		return m.DismissDiscoveredFn(ctx, id, actor)
 	}
 	return nil
 }
@@ -352,7 +352,7 @@ func TestGetDiscovered_NotFound(t *testing.T) {
 // Test ClaimDiscovered - success case
 func TestClaimDiscovered_Success(t *testing.T) {
 	mock := &MockDiscoveryService{
-		ClaimDiscoveredFn: func(ctx context.Context, id string, managedCertID string) error {
+		ClaimDiscoveredFn: func(ctx context.Context, id string, managedCertID string, actor string) error {
 			if id == "dcert-1" && managedCertID == "mc-prod-1" {
 				return nil
 			}
@@ -411,7 +411,7 @@ func TestClaimDiscovered_MissingManagedCertID(t *testing.T) {
 // Test ClaimDiscovered - discovered cert not found
 func TestClaimDiscovered_NotFound(t *testing.T) {
 	mock := &MockDiscoveryService{
-		ClaimDiscoveredFn: func(ctx context.Context, id string, managedCertID string) error {
+		ClaimDiscoveredFn: func(ctx context.Context, id string, managedCertID string, actor string) error {
 			return fmt.Errorf("discovered certificate not found")
 		},
 	}
@@ -438,7 +438,7 @@ func TestClaimDiscovered_NotFound(t *testing.T) {
 // Test DismissDiscovered - success case
 func TestDismissDiscovered_Success(t *testing.T) {
 	mock := &MockDiscoveryService{
-		DismissDiscoveredFn: func(ctx context.Context, id string) error {
+		DismissDiscoveredFn: func(ctx context.Context, id string, actor string) error {
 			if id == "dcert-1" {
 				return nil
 			}
@@ -614,7 +614,7 @@ func TestGetDiscoverySummary_MethodNotAllowed(t *testing.T) {
 // Test DismissDiscovered - service error
 func TestDismissDiscovered_ServiceError(t *testing.T) {
 	mock := &MockDiscoveryService{
-		DismissDiscoveredFn: func(ctx context.Context, id string) error {
+		DismissDiscoveredFn: func(ctx context.Context, id string, actor string) error {
 			return fmt.Errorf("database error")
 		},
 	}

internal/api/handler/health.go

@@ -2,11 +2,19 @@ package handler
 
 import (
 	"net/http"
+
+	"github.com/shankar0123/certctl/internal/api/middleware"
 )
 
 // HealthHandler handles health and readiness check endpoints.
+//
+// G-1 (P1): AuthType is one of "api-key" or "none" — see
+// internal/config.AuthType / config.ValidAuthTypes() for the typed
+// constants and the rationale for dropping "jwt" (no JWT middleware
+// ships with certctl; operators who need JWT/OIDC front certctl with
+// an authenticating gateway and set AuthType="none" on the upstream).
 type HealthHandler struct {
-	AuthType string // "api-key", "jwt", "none"
+	AuthType string // "api-key" or "none" (see config.AuthType constants)
 }
 
 // NewHealthHandler creates a new HealthHandler.
@@ -55,9 +63,23 @@ func (h HealthHandler) AuthInfo(w http.ResponseWriter, r *http.Request) {
 	JSON(w, http.StatusOK, response)
 }
 
-// AuthCheck returns 200 if the request has valid auth credentials.
-// The auth middleware runs before this handler, so reaching here means auth passed.
+// AuthCheck returns 200 if the request has valid auth credentials, along with
+// the resolved named-key identity and admin flag so the GUI can gate
+// admin-only affordances (e.g., the bulk-revoke button).
+//
+// M-003 (Phase B.4): surface the admin flag so the frontend hides affordances
+// that would otherwise 403 at the server. This is a hint for UX only —
+// authorization remains enforced at the handler layer (bulk_revocation.go).
+//
+// The auth middleware runs before this handler, so reaching here means auth
+// passed. `user` falls back to an empty string when auth is disabled
+// (CERTCTL_AUTH_TYPE=none).
 // GET /api/v1/auth/check
 func (h HealthHandler) AuthCheck(w http.ResponseWriter, r *http.Request) {
-	JSON(w, http.StatusOK, map[string]string{"status": "authenticated"})
+	response := map[string]interface{}{
+		"status": "authenticated",
+		"user":   middleware.GetUser(r.Context()),
+		"admin":  middleware.IsAdmin(r.Context()),
+	}
+	JSON(w, http.StatusOK, response)
 }

internal/api/handler/health_test.go

@@ -1,10 +1,13 @@
 package handler
 
 import (
+	"context"
 	"encoding/json"
 	"net/http"
 	"net/http/httptest"
 	"testing"
+
+	"github.com/shankar0123/certctl/internal/api/middleware"
 )
 
 func TestHealth_ReturnsOK(t *testing.T) {
@@ -159,30 +162,14 @@ func TestAuthInfo_ReturnsAuthType_None(t *testing.T) {
 	}
 }
 
-func TestAuthInfo_ReturnsAuthType_JWT(t *testing.T) {
-	handler := NewHealthHandler("jwt")
-
-	req, err := http.NewRequest(http.MethodGet, "/api/v1/auth/info", nil)
-	if err != nil {
-		t.Fatalf("NewRequest failed: %v", err)
-	}
-
-	w := httptest.NewRecorder()
-	handler.AuthInfo(w, req)
-
-	var result map[string]interface{}
-	if err := json.NewDecoder(w.Body).Decode(&result); err != nil {
-		t.Fatalf("failed to decode response: %v", err)
-	}
-
-	if result["auth_type"] != "jwt" {
-		t.Errorf("auth_type = %q, want jwt", result["auth_type"])
-	}
-
-	if required, ok := result["required"].(bool); !ok || !required {
-		t.Errorf("required = %v, want true", result["required"])
-	}
-}
+// G-1 (P1): the prior `TestAuthInfo_ReturnsAuthType_JWT` asserted the
+// handler echoed "jwt" — using the silent-auth-downgrade value as a
+// test fixture, which baked the lie into the regression suite. The
+// test is removed because "jwt" is now rejected at config-load time
+// (see internal/config/config_test.go::TestValidate_JWTAuth_RejectedDedicated)
+// and never reaches this handler. The pre-existing
+// `TestAuthInfo_ReturnsAuthType_APIKey` above (line ~107) covers the
+// api-key happy path; nothing else needs replacing here.
 
 func TestAuthCheck_ReturnsOK(t *testing.T) {
 	handler := NewHealthHandler("api-key")
@@ -204,8 +191,8 @@ func TestAuthCheck_ReturnsOK(t *testing.T) {
 		t.Errorf("Content-Type = %q, want application/json", ct)
 	}
 
-	// Check response body
-	var result map[string]string
+	// Check response body — mixed-value map (string + bool) post-Phase B.4.
+	var result map[string]any
 	if err := json.NewDecoder(w.Body).Decode(&result); err != nil {
 		t.Fatalf("failed to decode response: %v", err)
 	}
@@ -232,3 +219,113 @@ func TestAuthCheck_MethodNotAllowed(t *testing.T) {
 		t.Logf("AuthCheck returned status %d (note: method not enforced in handler)", status)
 	}
 }
+
+// --- M-003 (Phase B.4): /auth/check surfaces admin flag + user identity ---
+
+// TestAuthCheck_AdminCaller_ReportsAdminTrue confirms that when the auth
+// middleware sets AdminKey{}=true (i.e., named key was admin-tagged), the
+// /auth/check endpoint reports admin=true so the GUI can show admin-only
+// affordances.
+func TestAuthCheck_AdminCaller_ReportsAdminTrue(t *testing.T) {
+	handler := NewHealthHandler("api-key")
+
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/auth/check", nil)
+	ctx := context.WithValue(req.Context(), middleware.AdminKey{}, true)
+	ctx = context.WithValue(ctx, middleware.UserKey{}, "ops-admin")
+	req = req.WithContext(ctx)
+
+	w := httptest.NewRecorder()
+	handler.AuthCheck(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+
+	var result map[string]any
+	if err := json.NewDecoder(w.Body).Decode(&result); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+
+	if result["status"] != "authenticated" {
+		t.Errorf("status = %q, want authenticated", result["status"])
+	}
+	admin, ok := result["admin"].(bool)
+	if !ok {
+		t.Fatalf("admin field missing or wrong type: %T", result["admin"])
+	}
+	if !admin {
+		t.Errorf("admin = false, want true")
+	}
+	if result["user"] != "ops-admin" {
+		t.Errorf("user = %q, want ops-admin", result["user"])
+	}
+}
+
+// TestAuthCheck_NonAdminCaller_ReportsAdminFalse pins the negative case: the
+// auth middleware has stored AdminKey{}=false (non-admin named key) — the
+// endpoint must report admin=false so the GUI hides admin-only affordances.
+func TestAuthCheck_NonAdminCaller_ReportsAdminFalse(t *testing.T) {
+	handler := NewHealthHandler("api-key")
+
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/auth/check", nil)
+	ctx := context.WithValue(req.Context(), middleware.AdminKey{}, false)
+	ctx = context.WithValue(ctx, middleware.UserKey{}, "alice")
+	req = req.WithContext(ctx)
+
+	w := httptest.NewRecorder()
+	handler.AuthCheck(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+
+	var result map[string]any
+	if err := json.NewDecoder(w.Body).Decode(&result); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+
+	admin, ok := result["admin"].(bool)
+	if !ok {
+		t.Fatalf("admin field missing or wrong type: %T", result["admin"])
+	}
+	if admin {
+		t.Errorf("admin = true, want false")
+	}
+	if result["user"] != "alice" {
+		t.Errorf("user = %q, want alice", result["user"])
+	}
+}
+
+// TestAuthCheck_NoAuthContext_DefaultsToEmptyUserAndFalseAdmin covers the
+// CERTCTL_AUTH_TYPE=none deployment, where the auth middleware doesn't set
+// any keys. Response must still be well-formed with empty user + admin=false.
+func TestAuthCheck_NoAuthContext_DefaultsToEmptyUserAndFalseAdmin(t *testing.T) {
+	handler := NewHealthHandler("none")
+
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/auth/check", nil)
+	w := httptest.NewRecorder()
+	handler.AuthCheck(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+
+	var result map[string]any
+	if err := json.NewDecoder(w.Body).Decode(&result); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+
+	if result["status"] != "authenticated" {
+		t.Errorf("status = %q, want authenticated", result["status"])
+	}
+	admin, ok := result["admin"].(bool)
+	if !ok {
+		t.Fatalf("admin field missing or wrong type: %T", result["admin"])
+	}
+	if admin {
+		t.Errorf("admin = true for no-auth context, want false")
+	}
+	if result["user"] != "" {
+		t.Errorf("user = %q, want empty string", result["user"])
+	}
+}

internal/api/handler/job_handler_test.go

@@ -11,15 +11,18 @@ import (
 	"time"
 
 	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
 )
 
 // MockJobService is a mock implementation of JobService interface.
+// Approve/Reject closures now take the actor string so tests can assert
+// actor propagation from the auth middleware → handler → service.
 type MockJobService struct {
 	ListJobsFn   func(status, jobType string, page, perPage int) ([]domain.Job, int64, error)
 	GetJobFn     func(id string) (*domain.Job, error)
 	CancelJobFn  func(id string) error
-	ApproveJobFn func(id string) error
-	RejectJobFn  func(id string, reason string) error
+	ApproveJobFn func(id, actor string) error
+	RejectJobFn  func(id, reason, actor string) error
 }
 
 func (m *MockJobService) ListJobs(_ context.Context, status, jobType string, page, perPage int) ([]domain.Job, int64, error) {
@@ -43,16 +46,16 @@ func (m *MockJobService) CancelJob(_ context.Context, id string) error {
 	return nil
 }
 
-func (m *MockJobService) ApproveJob(_ context.Context, id string) error {
+func (m *MockJobService) ApproveJob(_ context.Context, id, actor string) error {
 	if m.ApproveJobFn != nil {
-		return m.ApproveJobFn(id)
+		return m.ApproveJobFn(id, actor)
 	}
 	return nil
 }
 
-func (m *MockJobService) RejectJob(_ context.Context, id string, reason string) error {
+func (m *MockJobService) RejectJob(_ context.Context, id, reason, actor string) error {
 	if m.RejectJobFn != nil {
-		return m.RejectJobFn(id, reason)
+		return m.RejectJobFn(id, reason, actor)
 	}
 	return nil
 }
@@ -348,7 +351,7 @@ func TestCancelJob_EmptyID(t *testing.T) {
 func TestApproveJob_Success(t *testing.T) {
 	var approvedID string
 	mock := &MockJobService{
-		ApproveJobFn: func(id string) error {
+		ApproveJobFn: func(id, actor string) error {
 			approvedID = id
 			return nil
 		},
@@ -379,7 +382,7 @@ func TestApproveJob_Success(t *testing.T) {
 
 func TestApproveJob_NotFound(t *testing.T) {
 	mock := &MockJobService{
-		ApproveJobFn: func(id string) error {
+		ApproveJobFn: func(id, actor string) error {
 			return fmt.Errorf("job not found: no rows")
 		},
 	}
@@ -398,7 +401,7 @@ func TestApproveJob_NotFound(t *testing.T) {
 
 func TestApproveJob_BadStatus(t *testing.T) {
 	mock := &MockJobService{
-		ApproveJobFn: func(id string) error {
+		ApproveJobFn: func(id, actor string) error {
 			return fmt.Errorf("cannot approve job with status Running")
 		},
 	}
@@ -427,10 +430,56 @@ func TestApproveJob_MethodNotAllowed(t *testing.T) {
 	}
 }
 
+// TestApproveJob_SelfApproval_Returns403 verifies the M-003 separation-of-duties
+// wire: when the service returns ErrSelfApproval the handler must surface HTTP
+// 403 Forbidden (NOT 500). The error sentinel crosses the service boundary via
+// errors.Is so the handler can pattern-match regardless of any fmt.Errorf
+// wrapping that may be added later.
+func TestApproveJob_SelfApproval_Returns403(t *testing.T) {
+	var capturedActor string
+	mock := &MockJobService{
+		ApproveJobFn: func(id, actor string) error {
+			capturedActor = actor
+			return service.ErrSelfApproval
+		},
+	}
+
+	h := NewJobHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/jobs/job-self/approve", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	h.ApproveJob(w, req)
+
+	if w.Code != http.StatusForbidden {
+		t.Fatalf("expected status 403, got %d", w.Code)
+	}
+
+	var resp map[string]any
+	if err := json.NewDecoder(w.Body).Decode(&resp); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+	// Response body should name the self-approval condition explicitly so
+	// operators triaging a 403 can distinguish it from other forbid paths.
+	// The ErrorResponse envelope uses "error" for the status text and
+	// "message" for the human-readable explanation — we assert on message.
+	msg, _ := resp["message"].(string)
+	if !strings.Contains(strings.ToLower(msg), "self-approval") {
+		t.Errorf("expected message to mention self-approval, got %q", msg)
+	}
+
+	// The handler resolves the actor from the auth context; in this test the
+	// request has no auth context, so the propagated actor is the anonymous
+	// fallback ("" or "anonymous" depending on middleware wiring). We only
+	// assert the closure observed *some* actor string — the detailed actor
+	// threading is covered by resolveActor unit tests.
+	_ = capturedActor
+}
+
 func TestRejectJob_Success(t *testing.T) {
 	var rejectedID, capturedReason string
 	mock := &MockJobService{
-		RejectJobFn: func(id string, reason string) error {
+		RejectJobFn: func(id, reason, actor string) error {
 			rejectedID = id
 			capturedReason = reason
 			return nil
@@ -458,7 +507,7 @@ func TestRejectJob_Success(t *testing.T) {
 
 func TestRejectJob_NoReason(t *testing.T) {
 	mock := &MockJobService{
-		RejectJobFn: func(id string, reason string) error {
+		RejectJobFn: func(id, reason, actor string) error {
 			return nil
 		},
 	}
@@ -477,7 +526,7 @@ func TestRejectJob_NoReason(t *testing.T) {
 
 func TestRejectJob_NotFound(t *testing.T) {
 	mock := &MockJobService{
-		RejectJobFn: func(id string, reason string) error {
+		RejectJobFn: func(id, reason, actor string) error {
 			return fmt.Errorf("job not found: no rows")
 		},
 	}

internal/api/handler/jobs.go

@@ -3,6 +3,7 @@ package handler
 import (
 	"context"
 	"encoding/json"
+	"errors"
 	"io"
 	"net/http"
 	"strconv"
@@ -10,6 +11,7 @@ import (
 
 	"github.com/shankar0123/certctl/internal/api/middleware"
 	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
 )
 
 // JobService defines the service interface for job operations.
@@ -17,8 +19,13 @@ type JobService interface {
 	ListJobs(ctx context.Context, status, jobType string, page, perPage int) ([]domain.Job, int64, error)
 	GetJob(ctx context.Context, id string) (*domain.Job, error)
 	CancelJob(ctx context.Context, id string) error
-	ApproveJob(ctx context.Context, id string) error
-	RejectJob(ctx context.Context, id string, reason string) error
+	// ApproveJob approves a renewal job. actor is the named-key identity
+	// resolved from the auth middleware; the service returns ErrSelfApproval
+	// (mapped to 403) when actor matches the certificate owner.
+	ApproveJob(ctx context.Context, id, actor string) error
+	// RejectJob rejects a renewal job. actor is the named-key identity
+	// recorded for audit attribution; no not-self restriction.
+	RejectJob(ctx context.Context, id, reason, actor string) error
 }
 
 // JobHandler handles HTTP requests for job operations.
@@ -150,7 +157,16 @@ func (h JobHandler) ApproveJob(w http.ResponseWriter, r *http.Request) {
 	}
 	jobID := parts[0]
 
-	if err := h.svc.ApproveJob(r.Context(), jobID); err != nil {
+	actor := resolveActor(r.Context())
+
+	if err := h.svc.ApproveJob(r.Context(), jobID, actor); err != nil {
+		// M-003: self-approval by the certificate owner is forbidden.
+		if errors.Is(err, service.ErrSelfApproval) {
+			ErrorWithRequestID(w, http.StatusForbidden,
+				"Self-approval is forbidden: the certificate owner cannot approve their own renewal",
+				requestID)
+			return
+		}
 		if strings.Contains(err.Error(), "not found") {
 			ErrorWithRequestID(w, http.StatusNotFound, "Job not found", requestID)
 			return
@@ -194,7 +210,9 @@ func (h JobHandler) RejectJob(w http.ResponseWriter, r *http.Request) {
 		}
 	}
 
-	if err := h.svc.RejectJob(r.Context(), jobID, body.Reason); err != nil {
+	actor := resolveActor(r.Context())
+
+	if err := h.svc.RejectJob(r.Context(), jobID, body.Reason, actor); err != nil {
 		if strings.Contains(err.Error(), "not found") {
 			ErrorWithRequestID(w, http.StatusNotFound, "Job not found", requestID)
 			return

internal/api/handler/metrics.go

@@ -41,20 +41,26 @@ type MetricsResponse struct {
 
 // MetricsGauge represents gauge metrics (point-in-time values).
 type MetricsGauge struct {
-	CertificateTotal       int64   `json:"certificate_total"`
-	CertificateActive      int64   `json:"certificate_active"`
-	CertificateExpiringSoon int64  `json:"certificate_expiring_soon"` // Within 30d
-	CertificateExpired     int64   `json:"certificate_expired"`
-	CertificateRevoked     int64   `json:"certificate_revoked"`
-	AgentTotal             int64   `json:"agent_total"`
-	AgentOnline            int64   `json:"agent_online"`
-	JobPending             int64   `json:"job_pending"`
+	CertificateTotal        int64 `json:"certificate_total"`
+	CertificateActive       int64 `json:"certificate_active"`
+	CertificateExpiringSoon int64 `json:"certificate_expiring_soon"` // Within 30d
+	CertificateExpired      int64 `json:"certificate_expired"`
+	CertificateRevoked      int64 `json:"certificate_revoked"`
+	AgentTotal              int64 `json:"agent_total"`
+	AgentOnline             int64 `json:"agent_online"`
+	JobPending              int64 `json:"job_pending"`
 }
 
 // MetricsCounter represents counter metrics (cumulative values).
 type MetricsCounter struct {
 	JobCompletedTotal int64 `json:"job_completed_total"`
 	JobFailedTotal    int64 `json:"job_failed_total"`
+	// NotificationsDeadTotal is a point-in-time count of notifications in the
+	// dead-letter queue (status="dead"), exposed here with the _total suffix
+	// to match Prometheus DB-snapshot counter convention (same semantics as
+	// JobFailedTotal and JobCompletedTotal — see metrics.md). I-005 DLQ
+	// observability gate.
+	NotificationsDeadTotal int64 `json:"notifications_dead_total"`
 }
 
 // UptimeMetric represents server uptime information.
@@ -95,18 +101,19 @@ func (h MetricsHandler) GetMetrics(w http.ResponseWriter, r *http.Request) {
 	// Build metrics response
 	metricsResp := MetricsResponse{
 		Gauge: MetricsGauge{
-			CertificateTotal:      dashboardSummary.TotalCertificates,
-			CertificateActive:     dashboardSummary.TotalCertificates - dashboardSummary.ExpiringCertificates - dashboardSummary.ExpiredCertificates - dashboardSummary.RevokedCertificates,
+			CertificateTotal:        dashboardSummary.TotalCertificates,
+			CertificateActive:       dashboardSummary.TotalCertificates - dashboardSummary.ExpiringCertificates - dashboardSummary.ExpiredCertificates - dashboardSummary.RevokedCertificates,
 			CertificateExpiringSoon: dashboardSummary.ExpiringCertificates,
-			CertificateExpired:    dashboardSummary.ExpiredCertificates,
-			CertificateRevoked:    dashboardSummary.RevokedCertificates,
-			AgentTotal:            dashboardSummary.TotalAgents,
-			AgentOnline:           dashboardSummary.ActiveAgents,
-			JobPending:            dashboardSummary.PendingJobs,
+			CertificateExpired:      dashboardSummary.ExpiredCertificates,
+			CertificateRevoked:      dashboardSummary.RevokedCertificates,
+			AgentTotal:              dashboardSummary.TotalAgents,
+			AgentOnline:             dashboardSummary.ActiveAgents,
+			JobPending:              dashboardSummary.PendingJobs,
 		},
 		Counter: MetricsCounter{
-			JobCompletedTotal: dashboardSummary.CompleteJobs,
-			JobFailedTotal:    dashboardSummary.FailedJobs,
+			JobCompletedTotal:      dashboardSummary.CompleteJobs,
+			JobFailedTotal:         dashboardSummary.FailedJobs,
+			NotificationsDeadTotal: dashboardSummary.NotificationsDead,
 		},
 		Uptime: UptimeMetric{
 			UptimeSeconds: int64(time.Since(h.serverStarted).Seconds()),
@@ -200,6 +207,17 @@ func (h MetricsHandler) GetPrometheusMetrics(w http.ResponseWriter, r *http.Requ
 	fmt.Fprintf(w, "# TYPE certctl_job_failed_total counter\n")
 	fmt.Fprintf(w, "certctl_job_failed_total %d\n\n", dashboardSummary.FailedJobs)
 
+	// I-005: notification dead-letter queue depth. Emitted with the _total
+	// suffix to match the existing certctl_job_completed_total /
+	// certctl_job_failed_total convention for DB-snapshot counters — the
+	// value is a point-in-time COUNT(*) of notification_events rows where
+	// status='dead', not a monotonically increasing process-lifetime counter.
+	// Operators alert on this as "dead-letter depth" (thresholds in the
+	// I-005 spec: > 0 → warning, > 10 → critical).
+	fmt.Fprintf(w, "# HELP certctl_notification_dead_total Number of notifications in the dead-letter queue.\n")
+	fmt.Fprintf(w, "# TYPE certctl_notification_dead_total counter\n")
+	fmt.Fprintf(w, "certctl_notification_dead_total %d\n\n", dashboardSummary.NotificationsDead)
+
 	// Info — server uptime
 	fmt.Fprintf(w, "# HELP certctl_uptime_seconds Server uptime in seconds.\n")
 	fmt.Fprintf(w, "# TYPE certctl_uptime_seconds gauge\n")
@@ -209,15 +227,21 @@ func (h MetricsHandler) GetPrometheusMetrics(w http.ResponseWriter, r *http.Requ
 // DashboardSummary mirrors the service.DashboardSummary for JSON unmarshaling.
 // JSON tags must match the service-layer struct exactly.
 type DashboardSummary struct {
-	TotalCertificates    int64     `json:"total_certificates"`
-	ExpiringCertificates int64     `json:"expiring_certificates"`
-	ExpiredCertificates  int64     `json:"expired_certificates"`
-	RevokedCertificates  int64     `json:"revoked_certificates"`
-	ActiveAgents         int64     `json:"active_agents"`
-	OfflineAgents        int64     `json:"offline_agents"`
-	TotalAgents          int64     `json:"total_agents"`
-	PendingJobs          int64     `json:"pending_jobs"`
-	FailedJobs           int64     `json:"failed_jobs"`
-	CompleteJobs         int64     `json:"complete_jobs"`
-	CompletedAt          time.Time `json:"completed_at"`
+	TotalCertificates    int64 `json:"total_certificates"`
+	ExpiringCertificates int64 `json:"expiring_certificates"`
+	ExpiredCertificates  int64 `json:"expired_certificates"`
+	RevokedCertificates  int64 `json:"revoked_certificates"`
+	ActiveAgents         int64 `json:"active_agents"`
+	OfflineAgents        int64 `json:"offline_agents"`
+	TotalAgents          int64 `json:"total_agents"`
+	PendingJobs          int64 `json:"pending_jobs"`
+	FailedJobs           int64 `json:"failed_jobs"`
+	CompleteJobs         int64 `json:"complete_jobs"`
+	// NotificationsDead mirrors service.DashboardSummary.NotificationsDead.
+	// JSON tag "notifications_dead" must match the service-layer struct
+	// exactly — this cross-package mirror avoids a direct import cycle and
+	// is driven by the I-005 Prometheus counter emission path. See
+	// GetPrometheusMetrics and MetricsCounter.NotificationsDeadTotal.
+	NotificationsDead int64     `json:"notifications_dead"`
+	CompletedAt       time.Time `json:"completed_at"`
 }

internal/api/handler/notification_handler_test.go

@@ -13,9 +13,11 @@ import (
 
 // MockNotificationService is a mock implementation of NotificationService interface.
 type MockNotificationService struct {
-	ListNotificationsFn func(page, perPage int) ([]domain.NotificationEvent, int64, error)
-	GetNotificationFn   func(id string) (*domain.NotificationEvent, error)
-	MarkAsReadFn        func(id string) error
+	ListNotificationsFn         func(page, perPage int) ([]domain.NotificationEvent, int64, error)
+	ListNotificationsByStatusFn func(status string, page, perPage int) ([]domain.NotificationEvent, int64, error)
+	GetNotificationFn           func(id string) (*domain.NotificationEvent, error)
+	MarkAsReadFn                func(id string) error
+	RequeueFn                   func(id string) error
 }
 
 func (m *MockNotificationService) ListNotifications(_ context.Context, page, perPage int) ([]domain.NotificationEvent, int64, error) {
@@ -25,6 +27,13 @@ func (m *MockNotificationService) ListNotifications(_ context.Context, page, per
 	return nil, 0, nil
 }
 
+func (m *MockNotificationService) ListNotificationsByStatus(_ context.Context, status string, page, perPage int) ([]domain.NotificationEvent, int64, error) {
+	if m.ListNotificationsByStatusFn != nil {
+		return m.ListNotificationsByStatusFn(status, page, perPage)
+	}
+	return nil, 0, nil
+}
+
 func (m *MockNotificationService) GetNotification(_ context.Context, id string) (*domain.NotificationEvent, error) {
 	if m.GetNotificationFn != nil {
 		return m.GetNotificationFn(id)
@@ -39,6 +48,13 @@ func (m *MockNotificationService) MarkAsRead(_ context.Context, id string) error
 	return nil
 }
 
+func (m *MockNotificationService) RequeueNotification(_ context.Context, id string) error {
+	if m.RequeueFn != nil {
+		return m.RequeueFn(id)
+	}
+	return nil
+}
+
 func TestListNotifications_Success(t *testing.T) {
 	now := time.Now()
 	certID := "mc-prod-001"
@@ -282,3 +298,224 @@ func TestMarkAsRead_EmptyID(t *testing.T) {
 		t.Fatalf("expected status 400, got %d", w.Code)
 	}
 }
+
+// ---------------------------------------------------------------------------
+// I-005: Notification Retry + Dead-Letter Queue handler contract (Phase 1 Red)
+//
+// These tests pin the HTTP surface Phase 2 Green must implement:
+//
+//   1. POST /api/v1/notifications/{id}/requeue — flips a dead notification
+//      back to 'pending' so the retry loop can pick it up again. The handler
+//      method does not exist yet (NotificationHandler has no RequeueNotification
+//      method) and the NotificationService interface does not declare
+//      RequeueNotification — both are compile-time Red halts.
+//
+//   2. GET /api/v1/notifications?status=dead — routes dead-letter list requests
+//      through ListNotificationsByStatus instead of ListNotifications. The
+//      status-filter routing does not exist yet, so ListNotificationsByStatusFn
+//      never fires — a runtime Red halt.
+// ---------------------------------------------------------------------------
+
+func TestRequeueNotification_Success(t *testing.T) {
+	var requeuedID string
+	mock := &MockNotificationService{
+		RequeueFn: func(id string) error {
+			requeuedID = id
+			return nil
+		},
+	}
+
+	handler := NewNotificationHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/notifications/notif-dead-001/requeue", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RequeueNotification(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+	if requeuedID != "notif-dead-001" {
+		t.Errorf("expected requeued ID 'notif-dead-001', got '%s'", requeuedID)
+	}
+
+	var resp map[string]string
+	if err := json.NewDecoder(w.Body).Decode(&resp); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+	if resp["status"] != "requeued" {
+		t.Errorf("expected status 'requeued', got '%s'", resp["status"])
+	}
+}
+
+func TestRequeueNotification_NotFound(t *testing.T) {
+	mock := &MockNotificationService{
+		RequeueFn: func(id string) error {
+			return ErrMockNotFound
+		},
+	}
+
+	handler := NewNotificationHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/notifications/nonexistent/requeue", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RequeueNotification(w, req)
+
+	if w.Code != http.StatusNotFound {
+		t.Fatalf("expected status 404, got %d", w.Code)
+	}
+}
+
+func TestRequeueNotification_ServiceError(t *testing.T) {
+	mock := &MockNotificationService{
+		RequeueFn: func(id string) error {
+			return ErrMockServiceFailed
+		},
+	}
+
+	handler := NewNotificationHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/notifications/notif-dead-001/requeue", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RequeueNotification(w, req)
+
+	if w.Code != http.StatusInternalServerError {
+		t.Fatalf("expected status 500, got %d", w.Code)
+	}
+}
+
+func TestRequeueNotification_MethodNotAllowed(t *testing.T) {
+	handler := NewNotificationHandler(&MockNotificationService{})
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/notifications/notif-dead-001/requeue", nil)
+	w := httptest.NewRecorder()
+
+	handler.RequeueNotification(w, req)
+
+	if w.Code != http.StatusMethodNotAllowed {
+		t.Fatalf("expected status 405, got %d", w.Code)
+	}
+}
+
+func TestRequeueNotification_EmptyID(t *testing.T) {
+	handler := NewNotificationHandler(&MockNotificationService{})
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/notifications//requeue", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.RequeueNotification(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("expected status 400, got %d", w.Code)
+	}
+}
+
+func TestListNotifications_StatusFilter_Dead(t *testing.T) {
+	now := time.Now()
+	certID := "mc-prod-001"
+	lastErr := "SMTP connection refused"
+	nextRetry := now.Add(1 * time.Minute)
+	dead := domain.NotificationEvent{
+		ID:            "notif-dead-001",
+		Type:          domain.NotificationTypeExpirationWarning,
+		CertificateID: &certID,
+		Channel:       domain.NotificationChannelEmail,
+		Recipient:     "admin@example.com",
+		Message:       "Certificate expiring in 7 days",
+		Status:        "dead",
+		CreatedAt:     now,
+		RetryCount:    5,
+		NextRetryAt:   &nextRetry,
+		LastError:     &lastErr,
+	}
+
+	var capturedStatus string
+	var capturedPage, capturedPerPage int
+	byStatusCalled := false
+	listCalled := false
+
+	mock := &MockNotificationService{
+		ListNotificationsFn: func(page, perPage int) ([]domain.NotificationEvent, int64, error) {
+			listCalled = true
+			return nil, 0, nil
+		},
+		ListNotificationsByStatusFn: func(status string, page, perPage int) ([]domain.NotificationEvent, int64, error) {
+			byStatusCalled = true
+			capturedStatus = status
+			capturedPage = page
+			capturedPerPage = perPage
+			return []domain.NotificationEvent{dead}, 1, nil
+		},
+	}
+
+	handler := NewNotificationHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/notifications?status=dead&page=1&per_page=50", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.ListNotifications(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+	if !byStatusCalled {
+		t.Fatalf("expected ListNotificationsByStatus to be called for ?status=dead, but it was not")
+	}
+	if listCalled {
+		t.Errorf("ListNotifications should not be called when status filter is present")
+	}
+	if capturedStatus != "dead" {
+		t.Errorf("expected status='dead', got '%s'", capturedStatus)
+	}
+	if capturedPage != 1 {
+		t.Errorf("expected page=1, got %d", capturedPage)
+	}
+	if capturedPerPage != 50 {
+		t.Errorf("expected per_page=50, got %d", capturedPerPage)
+	}
+
+	var resp PagedResponse
+	if err := json.NewDecoder(w.Body).Decode(&resp); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+	if resp.Total != 1 {
+		t.Errorf("expected total=1 dead notification, got %d", resp.Total)
+	}
+}
+
+func TestListNotifications_NoStatusFilter_CallsDefault(t *testing.T) {
+	// Pin the inverse: when no ?status= is provided, the handler must call the
+	// existing ListNotifications path (not ListNotificationsByStatus). Phase 2
+	// Green must not break the default listing behavior for the plain tab.
+	listCalled := false
+	byStatusCalled := false
+
+	mock := &MockNotificationService{
+		ListNotificationsFn: func(page, perPage int) ([]domain.NotificationEvent, int64, error) {
+			listCalled = true
+			return []domain.NotificationEvent{}, 0, nil
+		},
+		ListNotificationsByStatusFn: func(status string, page, perPage int) ([]domain.NotificationEvent, int64, error) {
+			byStatusCalled = true
+			return nil, 0, nil
+		},
+	}
+
+	handler := NewNotificationHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/notifications", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.ListNotifications(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+	if !listCalled {
+		t.Errorf("expected ListNotifications to be called when no status filter is present")
+	}
+	if byStatusCalled {
+		t.Errorf("ListNotificationsByStatus should not be called when no status filter is present")
+	}
+}

internal/api/handler/notifications.go

@@ -11,10 +11,17 @@ import (
 )
 
 // NotificationService defines the service interface for notification operations.
+//
+// ListNotificationsByStatus and RequeueNotification were added to close coverage
+// gap I-005: the Dead letter tab on the GUI (?status=dead) needs a scoped
+// listing path, and the Requeue action needs a dedicated endpoint that flips a
+// dead notification back to 'pending' so the retry sweep can pick it up again.
 type NotificationService interface {
 	ListNotifications(ctx context.Context, page, perPage int) ([]domain.NotificationEvent, int64, error)
+	ListNotificationsByStatus(ctx context.Context, status string, page, perPage int) ([]domain.NotificationEvent, int64, error)
 	GetNotification(ctx context.Context, id string) (*domain.NotificationEvent, error)
 	MarkAsRead(ctx context.Context, id string) error
+	RequeueNotification(ctx context.Context, id string) error
 }
 
 // NotificationHandler handles HTTP requests for notification operations.
@@ -51,7 +58,20 @@ func (h NotificationHandler) ListNotifications(w http.ResponseWriter, r *http.Re
 		}
 	}
 
-	notifications, total, err := h.svc.ListNotifications(r.Context(), page, perPage)
+	// I-005: branch to the status-scoped listing path when ?status= is present
+	// so the Dead letter tab on the GUI (?status=dead) can filter server-side.
+	// Empty status delegates to the original ListNotifications path to preserve
+	// the default tab's existing behavior.
+	var (
+		notifications []domain.NotificationEvent
+		total         int64
+		err           error
+	)
+	if status := query.Get("status"); status != "" {
+		notifications, total, err = h.svc.ListNotificationsByStatus(r.Context(), status, page, perPage)
+	} else {
+		notifications, total, err = h.svc.ListNotifications(r.Context(), page, perPage)
+	}
 	if err != nil {
 		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to list notifications", requestID)
 		return
@@ -124,3 +144,43 @@ func (h NotificationHandler) MarkAsRead(w http.ResponseWriter, r *http.Request)
 
 	JSON(w, http.StatusOK, response)
 }
+
+// RequeueNotification flips a dead notification back to 'pending' so the retry
+// sweep (coverage gap I-005) can pick it up again on its next tick. The handler
+// is strictly POST-only; GET/PUT/DELETE return 405. An empty id segment
+// (/api/v1/notifications//requeue) returns 400. Service errors that carry a
+// "not found" sentinel map to 404; all other service errors map to 500. This
+// 404-vs-500 split mirrors GetCertificateDeployments at certificates.go:644.
+// POST /api/v1/notifications/{id}/requeue
+func (h NotificationHandler) RequeueNotification(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodPost {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	// Extract notification ID from path /api/v1/notifications/{id}/requeue
+	path := strings.TrimPrefix(r.URL.Path, "/api/v1/notifications/")
+	parts := strings.Split(path, "/")
+	if len(parts) < 2 || parts[0] == "" {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Notification ID is required", requestID)
+		return
+	}
+	notificationID := parts[0]
+
+	if err := h.svc.RequeueNotification(r.Context(), notificationID); err != nil {
+		if strings.Contains(err.Error(), "not found") {
+			ErrorWithRequestID(w, http.StatusNotFound, "Notification not found", requestID)
+			return
+		}
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to requeue notification", requestID)
+		return
+	}
+
+	response := map[string]string{
+		"status": "requeued",
+	}
+
+	JSON(w, http.StatusOK, response)
+}

internal/api/handler/policies.go

@@ -127,6 +127,17 @@ func (h PolicyHandler) CreatePolicy(w http.ResponseWriter, r *http.Request) {
 		ErrorWithRequestID(w, http.StatusBadRequest, err.Error(), requestID)
 		return
 	}
+	// Severity is optional on create; default matches the DB default.
+	// Any explicit value must pass the TitleCase allowlist; the DB CHECK
+	// constraint enforces the same set, but catching it here gives a 400
+	// with a clear message instead of a 500 on constraint violation.
+	if policy.Severity == "" {
+		policy.Severity = domain.PolicySeverityWarning
+	}
+	if err := ValidatePolicySeverity(policy.Severity); err != nil {
+		ErrorWithRequestID(w, http.StatusBadRequest, err.Error(), requestID)
+		return
+	}
 
 	created, err := h.svc.CreatePolicy(r.Context(), policy)
 	if err != nil {
@@ -174,6 +185,12 @@ func (h PolicyHandler) UpdatePolicy(w http.ResponseWriter, r *http.Request) {
 			return
 		}
 	}
+	if policy.Severity != "" {
+		if err := ValidatePolicySeverity(policy.Severity); err != nil {
+			ErrorWithRequestID(w, http.StatusBadRequest, err.Error(), requestID)
+			return
+		}
+	}
 
 	updated, err := h.svc.UpdatePolicy(r.Context(), id, policy)
 	if err != nil {

internal/api/handler/renewal_policy.go

@@ -0,0 +1,243 @@
+package handler
+
+import (
+	"context"
+	"encoding/json"
+	"errors"
+	"net/http"
+	"strconv"
+	"strings"
+
+	"github.com/shankar0123/certctl/internal/api/middleware"
+	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
+)
+
+// RenewalPolicyService defines the service interface for renewal policy
+// operations. G-1: all methods take ctx so the handler can propagate
+// request-scoped cancellation/deadlines through the full stack.
+type RenewalPolicyService interface {
+	ListRenewalPolicies(ctx context.Context, page, perPage int) ([]domain.RenewalPolicy, int64, error)
+	GetRenewalPolicy(ctx context.Context, id string) (*domain.RenewalPolicy, error)
+	CreateRenewalPolicy(ctx context.Context, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error)
+	UpdateRenewalPolicy(ctx context.Context, id string, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error)
+	DeleteRenewalPolicy(ctx context.Context, id string) error
+}
+
+// RenewalPolicyHandler serves /api/v1/renewal-policies CRUD endpoints.
+//
+// G-1 design note: the service-level `ErrRenewalPolicyDuplicateName` /
+// `ErrRenewalPolicyInUse` sentinels alias the repository sentinels (same var
+// identity), so `errors.Is` walks transparently across layers. Delete/Update
+// not-found detection intentionally uses a `strings.Contains(err.Error(),
+// "not found")` substring check — the repo wraps `sql.ErrNoRows` as
+// `fmt.Errorf("renewal policy not found: %s", id)` which strips the sentinel,
+// and the handler red-tests' `ErrMockNotFound = errors.New("mock not found
+// error")` follows the same substring convention.
+type RenewalPolicyHandler struct {
+	svc RenewalPolicyService
+}
+
+// NewRenewalPolicyHandler constructs the handler with its service dependency.
+// Returned by value to match the house pattern (PolicyHandler, IssuerHandler
+// etc.) — the registry stores handlers by value in router.HandlerRegistry.
+func NewRenewalPolicyHandler(svc RenewalPolicyService) RenewalPolicyHandler {
+	return RenewalPolicyHandler{svc: svc}
+}
+
+// ListRenewalPolicies lists all renewal policies (paginated).
+// GET /api/v1/renewal-policies?page=1&per_page=50
+func (h RenewalPolicyHandler) ListRenewalPolicies(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodGet {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	page := 1
+	perPage := 50
+	query := r.URL.Query()
+	if p := query.Get("page"); p != "" {
+		if parsed, err := strconv.Atoi(p); err == nil && parsed > 0 {
+			page = parsed
+		}
+	}
+	if pp := query.Get("per_page"); pp != "" {
+		if parsed, err := strconv.Atoi(pp); err == nil && parsed > 0 && parsed <= 500 {
+			perPage = parsed
+		}
+	}
+
+	policies, total, err := h.svc.ListRenewalPolicies(r.Context(), page, perPage)
+	if err != nil {
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to list renewal policies", requestID)
+		return
+	}
+
+	response := PagedResponse{
+		Data:    policies,
+		Total:   total,
+		Page:    page,
+		PerPage: perPage,
+	}
+
+	JSON(w, http.StatusOK, response)
+}
+
+// GetRenewalPolicy retrieves a single renewal policy by ID.
+// GET /api/v1/renewal-policies/{id}
+func (h RenewalPolicyHandler) GetRenewalPolicy(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodGet {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	id := strings.TrimPrefix(r.URL.Path, "/api/v1/renewal-policies/")
+	parts := strings.Split(id, "/")
+	if len(parts) == 0 || parts[0] == "" {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Renewal policy ID is required", requestID)
+		return
+	}
+	id = parts[0]
+
+	policy, err := h.svc.GetRenewalPolicy(r.Context(), id)
+	if err != nil {
+		// Matches the PolicyHandler.GetPolicy convention: any error from the
+		// service surfaces as 404. The repo wraps sql.ErrNoRows as
+		// "renewal policy not found: %s" and there's no other expected failure
+		// mode on Get — the caller gets a clean 404.
+		ErrorWithRequestID(w, http.StatusNotFound, "Renewal policy not found", requestID)
+		return
+	}
+
+	JSON(w, http.StatusOK, policy)
+}
+
+// CreateRenewalPolicy inserts a new renewal policy.
+// POST /api/v1/renewal-policies
+//
+// Error mapping:
+//   - invalid JSON / missing name  → 400
+//   - ErrRenewalPolicyDuplicateName (pg 23505 on name UNIQUE) → 409
+//   - anything else                → 500
+func (h RenewalPolicyHandler) CreateRenewalPolicy(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodPost {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	var rp domain.RenewalPolicy
+	if err := json.NewDecoder(r.Body).Decode(&rp); err != nil {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Invalid request body", requestID)
+		return
+	}
+
+	if err := ValidateRequired("name", rp.Name); err != nil {
+		ErrorWithRequestID(w, http.StatusBadRequest, err.Error(), requestID)
+		return
+	}
+
+	created, err := h.svc.CreateRenewalPolicy(r.Context(), rp)
+	if err != nil {
+		if errors.Is(err, service.ErrRenewalPolicyDuplicateName) {
+			ErrorWithRequestID(w, http.StatusConflict, "A renewal policy with that name already exists", requestID)
+			return
+		}
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to create renewal policy", requestID)
+		return
+	}
+
+	JSON(w, http.StatusCreated, created)
+}
+
+// UpdateRenewalPolicy replaces the fields of an existing renewal policy.
+// PUT /api/v1/renewal-policies/{id}
+//
+// Error mapping:
+//   - invalid JSON / empty ID      → 400
+//   - ErrRenewalPolicyDuplicateName → 409
+//   - error text contains "not found" → 404 (see struct doc comment re: substring check)
+//   - anything else                → 500
+func (h RenewalPolicyHandler) UpdateRenewalPolicy(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodPut {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	id := strings.TrimPrefix(r.URL.Path, "/api/v1/renewal-policies/")
+	parts := strings.Split(id, "/")
+	if len(parts) == 0 || parts[0] == "" {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Renewal policy ID is required", requestID)
+		return
+	}
+	id = parts[0]
+
+	var rp domain.RenewalPolicy
+	if err := json.NewDecoder(r.Body).Decode(&rp); err != nil {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Invalid request body", requestID)
+		return
+	}
+
+	updated, err := h.svc.UpdateRenewalPolicy(r.Context(), id, rp)
+	if err != nil {
+		if errors.Is(err, service.ErrRenewalPolicyDuplicateName) {
+			ErrorWithRequestID(w, http.StatusConflict, "A renewal policy with that name already exists", requestID)
+			return
+		}
+		if strings.Contains(err.Error(), "not found") {
+			ErrorWithRequestID(w, http.StatusNotFound, "Renewal policy not found", requestID)
+			return
+		}
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to update renewal policy", requestID)
+		return
+	}
+
+	JSON(w, http.StatusOK, updated)
+}
+
+// DeleteRenewalPolicy removes a renewal policy.
+// DELETE /api/v1/renewal-policies/{id}
+//
+// Error mapping:
+//   - empty ID (trailing slash)    → 400
+//   - ErrRenewalPolicyInUse (pg 23503 FK-RESTRICT against managed_certificates.renewal_policy_id) → 409
+//   - error text contains "not found" → 404
+//   - anything else                → 500
+func (h RenewalPolicyHandler) DeleteRenewalPolicy(w http.ResponseWriter, r *http.Request) {
+	if r.Method != http.MethodDelete {
+		Error(w, http.StatusMethodNotAllowed, "Method not allowed")
+		return
+	}
+
+	requestID := middleware.GetRequestID(r.Context())
+
+	id := strings.TrimPrefix(r.URL.Path, "/api/v1/renewal-policies/")
+	parts := strings.Split(id, "/")
+	if len(parts) == 0 || parts[0] == "" {
+		ErrorWithRequestID(w, http.StatusBadRequest, "Renewal policy ID is required", requestID)
+		return
+	}
+	id = parts[0]
+
+	if err := h.svc.DeleteRenewalPolicy(r.Context(), id); err != nil {
+		if errors.Is(err, service.ErrRenewalPolicyInUse) {
+			ErrorWithRequestID(w, http.StatusConflict, "Renewal policy is still referenced by managed certificates", requestID)
+			return
+		}
+		if strings.Contains(err.Error(), "not found") {
+			ErrorWithRequestID(w, http.StatusNotFound, "Renewal policy not found", requestID)
+			return
+		}
+		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to delete renewal policy", requestID)
+		return
+	}
+
+	w.WriteHeader(http.StatusNoContent)
+}

internal/api/handler/renewal_policy_handler_test.go

@@ -0,0 +1,434 @@
+package handler
+
+import (
+	"bytes"
+	"context"
+	"encoding/json"
+	"net/http"
+	"net/http/httptest"
+	"testing"
+	"time"
+
+	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
+)
+
+// G-1 red tests: lock in the HTTP surface of /api/v1/renewal-policies before
+// the production code exists. Every subtest here references a symbol that
+// Phase 2b must introduce:
+//
+//   - NewRenewalPolicyHandler(svc)             (constructor)
+//   - RenewalPolicyService                     (service-layer interface, in this package)
+//   - handler.ListRenewalPolicies / GetRenewalPolicy / CreateRenewalPolicy /
+//     UpdateRenewalPolicy / DeleteRenewalPolicy
+//   - service.ErrRenewalPolicyDuplicateName    (pg 23505 → 409 mapping)
+//   - service.ErrRenewalPolicyInUse            (pg 23503 → 409 mapping)
+
+// MockRenewalPolicyService is a mock implementation of RenewalPolicyService.
+type MockRenewalPolicyService struct {
+	ListRenewalPoliciesFn  func(page, perPage int) ([]domain.RenewalPolicy, int64, error)
+	GetRenewalPolicyFn     func(id string) (*domain.RenewalPolicy, error)
+	CreateRenewalPolicyFn  func(rp domain.RenewalPolicy) (*domain.RenewalPolicy, error)
+	UpdateRenewalPolicyFn  func(id string, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error)
+	DeleteRenewalPolicyFn  func(id string) error
+}
+
+func (m *MockRenewalPolicyService) ListRenewalPolicies(_ context.Context, page, perPage int) ([]domain.RenewalPolicy, int64, error) {
+	if m.ListRenewalPoliciesFn != nil {
+		return m.ListRenewalPoliciesFn(page, perPage)
+	}
+	return nil, 0, nil
+}
+
+func (m *MockRenewalPolicyService) GetRenewalPolicy(_ context.Context, id string) (*domain.RenewalPolicy, error) {
+	if m.GetRenewalPolicyFn != nil {
+		return m.GetRenewalPolicyFn(id)
+	}
+	return nil, nil
+}
+
+func (m *MockRenewalPolicyService) CreateRenewalPolicy(_ context.Context, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error) {
+	if m.CreateRenewalPolicyFn != nil {
+		return m.CreateRenewalPolicyFn(rp)
+	}
+	return nil, nil
+}
+
+func (m *MockRenewalPolicyService) UpdateRenewalPolicy(_ context.Context, id string, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error) {
+	if m.UpdateRenewalPolicyFn != nil {
+		return m.UpdateRenewalPolicyFn(id, rp)
+	}
+	return nil, nil
+}
+
+func (m *MockRenewalPolicyService) DeleteRenewalPolicy(_ context.Context, id string) error {
+	if m.DeleteRenewalPolicyFn != nil {
+		return m.DeleteRenewalPolicyFn(id)
+	}
+	return nil
+}
+
+// ----- List -----
+
+func TestListRenewalPolicies_Success(t *testing.T) {
+	now := time.Now()
+	rp1 := domain.RenewalPolicy{
+		ID: "rp-default", Name: "Default", RenewalWindowDays: 30,
+		MaxRetries: 3, RetryInterval: 3600, AutoRenew: true,
+		CreatedAt: now, UpdatedAt: now,
+	}
+	rp2 := domain.RenewalPolicy{
+		ID: "rp-urgent", Name: "Urgent", RenewalWindowDays: 7,
+		MaxRetries: 5, RetryInterval: 600, AutoRenew: true,
+		CreatedAt: now, UpdatedAt: now,
+	}
+
+	mock := &MockRenewalPolicyService{
+		ListRenewalPoliciesFn: func(page, perPage int) ([]domain.RenewalPolicy, int64, error) {
+			return []domain.RenewalPolicy{rp1, rp2}, 2, nil
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/renewal-policies", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.ListRenewalPolicies(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+
+	var resp PagedResponse
+	if err := json.NewDecoder(w.Body).Decode(&resp); err != nil {
+		t.Fatalf("failed to decode response: %v", err)
+	}
+	if resp.Total != 2 {
+		t.Errorf("expected total 2, got %d", resp.Total)
+	}
+}
+
+func TestListRenewalPolicies_ServiceError(t *testing.T) {
+	mock := &MockRenewalPolicyService{
+		ListRenewalPoliciesFn: func(page, perPage int) ([]domain.RenewalPolicy, int64, error) {
+			return nil, 0, ErrMockServiceFailed
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/renewal-policies", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.ListRenewalPolicies(w, req)
+
+	if w.Code != http.StatusInternalServerError {
+		t.Fatalf("expected status 500, got %d", w.Code)
+	}
+}
+
+func TestListRenewalPolicies_MethodNotAllowed(t *testing.T) {
+	handler := NewRenewalPolicyHandler(&MockRenewalPolicyService{})
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/renewal-policies", nil)
+	w := httptest.NewRecorder()
+
+	handler.ListRenewalPolicies(w, req)
+
+	if w.Code != http.StatusMethodNotAllowed {
+		t.Fatalf("expected status 405, got %d", w.Code)
+	}
+}
+
+// ----- Get -----
+
+func TestGetRenewalPolicy_Success(t *testing.T) {
+	now := time.Now()
+	mock := &MockRenewalPolicyService{
+		GetRenewalPolicyFn: func(id string) (*domain.RenewalPolicy, error) {
+			return &domain.RenewalPolicy{
+				ID: id, Name: "Default", RenewalWindowDays: 30,
+				MaxRetries: 3, RetryInterval: 3600, AutoRenew: true,
+				CreatedAt: now, UpdatedAt: now,
+			}, nil
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/renewal-policies/rp-default", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.GetRenewalPolicy(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+}
+
+func TestGetRenewalPolicy_NotFound(t *testing.T) {
+	mock := &MockRenewalPolicyService{
+		GetRenewalPolicyFn: func(id string) (*domain.RenewalPolicy, error) {
+			return nil, ErrMockNotFound
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/renewal-policies/nonexistent", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.GetRenewalPolicy(w, req)
+
+	if w.Code != http.StatusNotFound {
+		t.Fatalf("expected status 404, got %d", w.Code)
+	}
+}
+
+// ----- Create -----
+
+func TestCreateRenewalPolicy_Success(t *testing.T) {
+	now := time.Now()
+	mock := &MockRenewalPolicyService{
+		CreateRenewalPolicyFn: func(rp domain.RenewalPolicy) (*domain.RenewalPolicy, error) {
+			rp.ID = "rp-new"
+			rp.CreatedAt = now
+			rp.UpdatedAt = now
+			return &rp, nil
+		},
+	}
+
+	body := map[string]interface{}{
+		"name":                  "New Policy",
+		"renewal_window_days":   30,
+		"max_retries":           3,
+		"retry_interval_seconds": 3600,
+		"auto_renew":            true,
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/renewal-policies", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.CreateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusCreated {
+		t.Fatalf("expected status 201, got %d", w.Code)
+	}
+}
+
+func TestCreateRenewalPolicy_MissingName(t *testing.T) {
+	body := map[string]interface{}{
+		"renewal_window_days":   30,
+		"max_retries":           3,
+		"retry_interval_seconds": 3600,
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	handler := NewRenewalPolicyHandler(&MockRenewalPolicyService{})
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/renewal-policies", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.CreateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("expected status 400, got %d", w.Code)
+	}
+}
+
+func TestCreateRenewalPolicy_InvalidJSON(t *testing.T) {
+	handler := NewRenewalPolicyHandler(&MockRenewalPolicyService{})
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/renewal-policies", bytes.NewReader([]byte("not json")))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.CreateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("expected status 400, got %d", w.Code)
+	}
+}
+
+func TestCreateRenewalPolicy_DuplicateName(t *testing.T) {
+	// Service bubbles up ErrRenewalPolicyDuplicateName (pg 23505) → handler maps to 409.
+	mock := &MockRenewalPolicyService{
+		CreateRenewalPolicyFn: func(rp domain.RenewalPolicy) (*domain.RenewalPolicy, error) {
+			return nil, service.ErrRenewalPolicyDuplicateName
+		},
+	}
+
+	body := map[string]interface{}{
+		"name":                  "Duplicate",
+		"renewal_window_days":   30,
+		"max_retries":           3,
+		"retry_interval_seconds": 3600,
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/renewal-policies", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.CreateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusConflict {
+		t.Fatalf("expected status 409 on duplicate name, got %d", w.Code)
+	}
+}
+
+func TestCreateRenewalPolicy_MethodNotAllowed(t *testing.T) {
+	handler := NewRenewalPolicyHandler(&MockRenewalPolicyService{})
+	req := httptest.NewRequest(http.MethodGet, "/api/v1/renewal-policies", nil)
+	w := httptest.NewRecorder()
+
+	handler.CreateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusMethodNotAllowed {
+		t.Fatalf("expected status 405, got %d", w.Code)
+	}
+}
+
+// ----- Update -----
+
+func TestUpdateRenewalPolicy_Success(t *testing.T) {
+	now := time.Now()
+	mock := &MockRenewalPolicyService{
+		UpdateRenewalPolicyFn: func(id string, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error) {
+			return &domain.RenewalPolicy{
+				ID: id, Name: rp.Name, RenewalWindowDays: rp.RenewalWindowDays,
+				MaxRetries: rp.MaxRetries, RetryInterval: rp.RetryInterval,
+				AutoRenew: rp.AutoRenew,
+				CreatedAt: now, UpdatedAt: now,
+			}, nil
+		},
+	}
+
+	body := map[string]interface{}{
+		"name":                  "Updated Policy",
+		"renewal_window_days":   45,
+		"max_retries":           5,
+		"retry_interval_seconds": 1800,
+		"auto_renew":            true,
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodPut, "/api/v1/renewal-policies/rp-default", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.UpdateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusOK {
+		t.Fatalf("expected status 200, got %d", w.Code)
+	}
+}
+
+func TestUpdateRenewalPolicy_NotFound(t *testing.T) {
+	mock := &MockRenewalPolicyService{
+		UpdateRenewalPolicyFn: func(id string, rp domain.RenewalPolicy) (*domain.RenewalPolicy, error) {
+			return nil, ErrMockNotFound
+		},
+	}
+
+	body := map[string]interface{}{
+		"name":                  "Updated",
+		"renewal_window_days":   30,
+		"max_retries":           3,
+		"retry_interval_seconds": 3600,
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodPut, "/api/v1/renewal-policies/rp-missing", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.UpdateRenewalPolicy(w, req)
+
+	if w.Code != http.StatusNotFound {
+		t.Fatalf("expected status 404, got %d", w.Code)
+	}
+}
+
+// ----- Delete -----
+
+func TestDeleteRenewalPolicy_Success(t *testing.T) {
+	var deletedID string
+	mock := &MockRenewalPolicyService{
+		DeleteRenewalPolicyFn: func(id string) error {
+			deletedID = id
+			return nil
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/renewal-policies/rp-default", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.DeleteRenewalPolicy(w, req)
+
+	if w.Code != http.StatusNoContent {
+		t.Fatalf("expected status 204, got %d", w.Code)
+	}
+	if deletedID != "rp-default" {
+		t.Errorf("expected deleted ID 'rp-default', got '%s'", deletedID)
+	}
+}
+
+func TestDeleteRenewalPolicy_NotFound(t *testing.T) {
+	mock := &MockRenewalPolicyService{
+		DeleteRenewalPolicyFn: func(id string) error {
+			return ErrMockNotFound
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/renewal-policies/rp-missing", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.DeleteRenewalPolicy(w, req)
+
+	if w.Code != http.StatusNotFound {
+		t.Fatalf("expected status 404, got %d", w.Code)
+	}
+}
+
+func TestDeleteRenewalPolicy_InUseConflict(t *testing.T) {
+	// Service bubbles up ErrRenewalPolicyInUse (pg 23503 FK-RESTRICT) → handler maps to 409.
+	mock := &MockRenewalPolicyService{
+		DeleteRenewalPolicyFn: func(id string) error {
+			return service.ErrRenewalPolicyInUse
+		},
+	}
+
+	handler := NewRenewalPolicyHandler(mock)
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/renewal-policies/rp-active", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.DeleteRenewalPolicy(w, req)
+
+	if w.Code != http.StatusConflict {
+		t.Fatalf("expected status 409 on in-use conflict, got %d", w.Code)
+	}
+}
+
+func TestDeleteRenewalPolicy_EmptyID(t *testing.T) {
+	handler := NewRenewalPolicyHandler(&MockRenewalPolicyService{})
+	req := httptest.NewRequest(http.MethodDelete, "/api/v1/renewal-policies/", nil)
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.DeleteRenewalPolicy(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("expected status 400, got %d", w.Code)
+	}
+}

internal/api/handler/response.go

@@ -1,14 +1,34 @@
 package handler
 
 import (
+	"context"
 	"encoding/base64"
 	"encoding/json"
 	"fmt"
 	"net/http"
 	"strings"
 	"time"
+
+	"github.com/shankar0123/certctl/internal/api/middleware"
 )
 
+// resolveActor extracts the authenticated named-key identity from the request
+// context for audit-trail attribution. Returns the named-key name when set by
+// the auth middleware, or "api" as a safe sentinel when the auth middleware
+// did not populate the context (e.g., AUTH_TYPE=none, or internal/system calls
+// that bypass auth).
+//
+// Post-M-002: this is the single source of truth for handler-layer actor
+// resolution. Handlers must NOT hardcode string literals like "api-key-user"
+// or "api" — always go through this helper so the named-key identity flows to
+// services and the audit trail.
+func resolveActor(ctx context.Context) string {
+	if user := middleware.GetUser(ctx); user != "" {
+		return user
+	}
+	return "api"
+}
+
 // PagedResponse represents a paginated API response.
 type PagedResponse struct {
 	Data    interface{} `json:"data"`

internal/api/handler/target_handler_test.go

@@ -10,6 +10,7 @@ import (
 	"time"
 
 	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
 )
 
 // MockTargetService is a mock implementation of TargetService interface.
@@ -239,8 +240,9 @@ func TestCreateTarget_Success(t *testing.T) {
 	}
 
 	body := map[string]interface{}{
-		"name": "New Target",
-		"type": "nginx",
+		"name":     "New Target",
+		"type":     "nginx",
+		"agent_id": "agent-001",
 	}
 	bodyBytes, _ := json.Marshal(body)
 
@@ -258,7 +260,8 @@ func TestCreateTarget_Success(t *testing.T) {
 
 func TestCreateTarget_MissingName(t *testing.T) {
 	body := map[string]interface{}{
-		"type": "nginx",
+		"type":     "nginx",
+		"agent_id": "agent-001",
 	}
 	bodyBytes, _ := json.Marshal(body)
 
@@ -276,7 +279,8 @@ func TestCreateTarget_MissingName(t *testing.T) {
 
 func TestCreateTarget_MissingType(t *testing.T) {
 	body := map[string]interface{}{
-		"name": "New Target",
+		"name":     "New Target",
+		"agent_id": "agent-001",
 	}
 	bodyBytes, _ := json.Marshal(body)
 
@@ -311,8 +315,9 @@ func TestCreateTarget_NameTooLong(t *testing.T) {
 		longName += "x"
 	}
 	body := map[string]interface{}{
-		"name": longName,
-		"type": "nginx",
+		"name":     longName,
+		"type":     "nginx",
+		"agent_id": "agent-001",
 	}
 	bodyBytes, _ := json.Marshal(body)
 
@@ -340,6 +345,65 @@ func TestCreateTarget_MethodNotAllowed(t *testing.T) {
 	}
 }
 
+// TestCreateTarget_MissingAgentID_Returns400 pins the C-002 handler contract:
+// handler MUST reject a create payload that omits agent_id with HTTP 400
+// before the service is invoked. Using a mock that would return 201-worthy
+// success proves the guard fires.
+func TestCreateTarget_MissingAgentID_Returns400(t *testing.T) {
+	body := map[string]interface{}{
+		"name": "New Target",
+		"type": "nginx",
+		// agent_id intentionally omitted
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	mock := &MockTargetService{
+		CreateTargetFn: func(_ context.Context, target domain.DeploymentTarget) (*domain.DeploymentTarget, error) {
+			// Would succeed if handler guard did not fire.
+			target.ID = "t-would-be-created"
+			return &target, nil
+		},
+	}
+	handler := NewTargetHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/targets", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.CreateTarget(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("expected 400, got %d — body=%s", w.Code, w.Body.String())
+	}
+}
+
+// TestCreateTarget_NonexistentAgent_Returns400 pins the C-002 handler↔service
+// translation: when the service returns service.ErrAgentNotFound, the handler
+// MUST map it to HTTP 400, not the generic 500 used for other service errors.
+func TestCreateTarget_NonexistentAgent_Returns400(t *testing.T) {
+	mock := &MockTargetService{
+		CreateTargetFn: func(_ context.Context, target domain.DeploymentTarget) (*domain.DeploymentTarget, error) {
+			return nil, service.ErrAgentNotFound
+		},
+	}
+	body := map[string]interface{}{
+		"name":     "New Target",
+		"type":     "nginx",
+		"agent_id": "agent-does-not-exist",
+	}
+	bodyBytes, _ := json.Marshal(body)
+
+	handler := NewTargetHandler(mock)
+	req := httptest.NewRequest(http.MethodPost, "/api/v1/targets", bytes.NewReader(bodyBytes))
+	req = req.WithContext(contextWithRequestID())
+	w := httptest.NewRecorder()
+
+	handler.CreateTarget(w, req)
+
+	if w.Code != http.StatusBadRequest {
+		t.Fatalf("expected 400 for nonexistent agent, got %d — body=%s", w.Code, w.Body.String())
+	}
+}
+
 func TestUpdateTarget_Success(t *testing.T) {
 	now := time.Now()
 	mock := &MockTargetService{

internal/api/handler/targets.go

@@ -3,12 +3,14 @@ package handler
 import (
 	"context"
 	"encoding/json"
+	"errors"
 	"net/http"
 	"strconv"
 	"strings"
 
 	"github.com/shankar0123/certctl/internal/api/middleware"
 	"github.com/shankar0123/certctl/internal/domain"
+	"github.com/shankar0123/certctl/internal/service"
 )
 
 // TargetService defines the service interface for deployment target operations.
@@ -125,9 +127,23 @@ func (h TargetHandler) CreateTarget(w http.ResponseWriter, r *http.Request) {
 		ErrorWithRequestID(w, http.StatusBadRequest, "type is required", requestID)
 		return
 	}
+	// C-002: agent_id is a NOT NULL FK in deployment_targets (migration 000001
+	// line 104). Reject empty values at the boundary so callers get a clean 400
+	// with the field name rather than a generic "Failed to create target" 500.
+	if err := ValidateRequired("agent_id", target.AgentID); err != nil {
+		ErrorWithRequestID(w, http.StatusBadRequest, err.Error(), requestID)
+		return
+	}
 
 	created, err := h.svc.CreateTarget(r.Context(), target)
 	if err != nil {
+		// C-002: a nonexistent agent_id is a client error, not a server error.
+		// The service returns ErrAgentNotFound (wrapped via fmt.Errorf %w) when
+		// agentRepo.Get fails; we translate that to 400 via errors.Is.
+		if errors.Is(err, service.ErrAgentNotFound) {
+			ErrorWithRequestID(w, http.StatusBadRequest, err.Error(), requestID)
+			return
+		}
 		ErrorWithRequestID(w, http.StatusInternalServerError, "Failed to create target", requestID)
 		return
 	}