Ben Duncan
ea3e01bb20
* fix: reboot a guest by asking it, not by pulling its reset line RebootInstances was QMP system_reset alone. The guest kernel is never told, so it does not sync, does not unmount and loses every dirty page - which is how a reboot issued seconds after a write loses that write, and how a guest rebooted during cloud-init can fail to come back at all. Guests now launch with -action shutdown=pause, so a clean guest poweroff leaves QEMU paused rather than gone. Reboot presses the power button, waits for the guest to reach that state, then resets and resumes the same process: no volume, tap or state churn, and no window where the guest is missing. A guest that will not go quietly is hard-reset, which is what AWS documents. The button is pressed again every 10s while the guest ignores it. One signal is not a shutdown request on a guest whose acpid has not started, which is the same boot race that produced the failure. Two consequences handled here: a guest that powers itself off now leaves QEMU paused, so the heartbeat quits it; and a guest launched before the flag exits on powerdown rather than pausing, so it is reset without being asked. * fix: answer a reboot when it is accepted, not when the guest is back Asking a guest to shut down takes as long as the guest takes. RebootInstances gives the daemon five seconds to reply, so a reboot that waited for the guest reported a reboot that had in fact succeeded as InvalidInstanceID.NotFound. Manager.Reboot now admits the reboot — the instance exists and is running — and runs the powerdown and reset in the background, which is the contract EC2 documents. The two admission failures are still reported; nothing after them can be, so a reset that fails is logged and left to the heartbeat. The gateway also stops calling a NATS timeout NotFound. Only the absence of a subscriber says anything about where the instance is, which is how the sibling start and terminate paths already read it. * test: prove the churn reboot by its boot ID, not by how fast it happened The subtest waited ten seconds and then read /proc/uptime. A reboot is asynchronous, so the guest answering at that point may be the one that has not shut down yet, and its uptime is whatever it was before — which the test reads as "reboot may not have occurred". Waiting for the boot ID to change is positive proof the guest rebooted and does not depend on how long the guest takes to go down. The uptime assertion stays, now measured against a boot that is known to be new. * test: prove the graceful reboot against real guests and a real engine Two tests the reboot design asked for and the unit tests cannot give. Cell 18 launches two guests that differ only in how they answer the power button. One installs a shutdown hook writing an fsynced line a second, so the file that survives measures how much of its shutdown it was allowed to run — a guest reset instead of asked leaves none of it. The other ignores the power key entirely and must be reset once its budget expires, with the daemon saying so. Each variant asserts the evidence only it can produce, and the slow one asserts the absence of the line the wedged one requires. Cell 27 loads a PostgreSQL instance past its shared buffers with pgbench and reboots it dirty. The probe is an UNLOGGED table: PostgreSQL writes no WAL for one, so a clean shutdown checkpoints it and crash recovery truncates it unconditionally. Rows committed normally survive a hard reset too, so the obvious assertion would pass against the bug. The rds suite and cell 27 both gain budget for the load phase. * fix: stop the process-group test misreading a reaped child as alive The test polled until the child was gone, then checked once more. A task being reaped shows state X for an instant, which processRunning counted as running, so that second look failed about 1 run in 50 under -race. * fix: wait for the recovery retry loop before removing a test's data dir restoreInstances starts the retry loop untracked, and it rewrites the local state file when it ends. A write landing during t.TempDir cleanup failed TestRestoreInstances_* with RemoveAll: directory not empty.
What is Spinifex? · Platform · Deploy · AWS Compatibility · Live Demo · Components · Architecture · Installation · Docs
Spinifex: the open, AWS-compatible cloud you run yourself
Spinifex, built by Mulga, recreates the AWS services your software already uses (EC2, EBS, S3, VPC, IAM) on infrastructure you control. Move workloads off the hyperscalers, run AI at a fraction of the cost, or take the cloud to the edge, without rewriting a line. The exact build you ship to AWS, Spinifex serves on your own hardware: same APIs, same Terraform, same SDKs.
What is Spinifex?
Spinifex is an open-source infrastructure platform that recreates the AWS service surface (EC2, EBS, S3, VPC, IAM) on bare-metal, edge, and on-premises environments. Run cloud-native software without a hyperscaler.
Built for teams that need:
- The AWS tooling you already use (AWS CLI, SDKs, Terraform), with nothing to rewrite
- Full control of the stack: your hardware, your network, your data, your keys
- A cloud that keeps running offline, through disconnection, with no external control plane
- An open core (AGPL-3.0), auditable and yours to keep, with no lock-in
You change where your software runs, not what it is.
The Platform
From commodity hardware up to unmodified AWS tooling, every layer is replaceable and yours to own.
Three Ways To Deploy
The same AWS-compatible platform runs in three shapes. Pick the one that matches your hardware.
Neocloud
Lift and shift onto a partner Neocloud without rewriting workloads. GPU capacity (H100 / H200 / B200), cheaper, available now. Change an endpoint, keep the software.
On-premise
Host Spinifex on your own hardware in your own data centre. You get a multi-node HA cluster integrated with your storage and networking, so the stack, the data, and the jurisdiction stay yours.
Edge
Cloud where the cloud can't reach. Air-gapped sites, vehicles, vessels, factories, and clinics. Compute next to the data, running through disconnection, on hardware you own. The same AWS APIs your software already uses.
AWS Compatibility
Spinifex speaks the AWS API surface. The AWS SDKs, AWS CLI, and Terraform all work unchanged, whether you deploy at the edge, on-premise, or on a partner Neocloud.
| Service | What it is | Status |
|---|---|---|
| EC2 | Compute | Available |
| EBS | Block Storage | Available |
| S3 | Object Storage | Available |
| VPC | Networking | Available |
| IAM | Identity & Auth | Available |
| ALB / NLB | Load Balancers | Available |
| EKS | Kubernetes | Available |
| ECR | Container Registry | Available |
| ECS | Container Service | Available |
| RDS | Databases | Available |
| Bedrock | AI Deployment | Q3 2026 |
Roadmap items ship under the same AWS API surface. Code written for AWS today keeps working the moment they land. Track what's shipped in the release notes.
Live Demo
Create a live sandbox in under a minute. The fastest way to experience the stack. Try Spinifex against one of your own workloads on infrastructure we run for you.
- Live in under a minute. No card, no install.
- Yours for 72 hours to test and experiment.
- Real AWS-compatible endpoint, access keys and console.
- EC2, EBS, S3, VPC, IAM, EKS and RDS, ready to call.
- Point your existing AWS CLI or Terraform straight at it.
Sign up at https://mulgadc.com/signup
Core Components
Spinifex (Compute and Platform Services – EC2, EKS, ECS, RDS)
Spinifex is a minimal VM orchestration layer built on top of QEMU, exposing an EC2 compatible API. It manages lifecycle operations like start, stop, and terminate through QEMU's QMP interface. Designed to be straightforward and scriptable, Spinifex lets you launch VMs with the AWS CLI, SDKs, or Terraform, without Kubernetes or a heavyweight orchestrator.
The managed services build on that same instance layer. An EKS node group, an ECS container instance, and an RDS database are Spinifex VMs on your own hardware, each driven through its own AWS API.
- EC2 – VM lifecycle on bare metal, cloud-init and IMDS metadata, key pairs, tags, spot instances, capacity reservations, and GPU passthrough
- EKS – Managed Kubernetes on k3s, with HA control planes, managed node groups, cluster add-ons, an OIDC provider, and IAM access entries
- ECS – Task and service scheduling across container instances, with awsvpc ENIs, capacity providers, rolling deployments, and GPU-aware placement
- ECR – Private container registry backed by Predastore, with content-addressed blobs deduplicated per account and lifecycle policies
- RDS – Managed PostgreSQL and MariaDB, with parameter groups, automated backups, and DNS endpoints served by Northstar
- ALB / NLB – Layer 7 load balancing on HAProxy and layer 4 on nginx
stream, with health checks and ACM-issued listener certificates - VPC and IAM – OVN-backed networking and security groups, with roles, policies, and SigV4 auth applied across every service
Viperblock (Block Storage – EBS Alternative)
Viperblock is a high-performance, WAL-backed block storage service that replicates volumes across multiple nodes. It's built for reliability and speed, with support for snapshots, recovery, and direct connection to QEMU instances using NBD or virtio-blk.
- Fast, durable virtual disks
- Replication for resilience
- Exposed over NBD or embedded in VMs
- High performance WAL logs on local NVMe drives, reducing IO traffic to S3
- In-memory read/write block cache
Predastore (Object Storage – S3-Compatible)
Predastore is a fully S3-compatible object storage system. It supports the AWS S3 API, including Signature V4 authentication, multipart uploads, and Terraform provisioning. Predastore chunks data and distributes it across nodes using Reed-Solomon erasure coding, so it survives node loss and suits large-scale or low-bandwidth sites.
- S3-compatible API and auth
- Multipart uploads, streaming reads/writes
- Data redundancy with Reed-Solomon encoding
Northstar (Authoritative DNS)
Northstar is a lightweight authoritative DNS server that handles both internal service discovery and public-facing DNS for a Spinifex cluster. Zones are human-readable TOML files, served from the local filesystem or synced from Predastore, keeping DNS configuration in the same object storage as the rest of your infrastructure.
- Authoritative DNS over UDP, TCP, and DNS-over-TLS
- Service discovery for cluster components via SRV records
- Zone files stored locally or in S3-compatible storage
Architecture at a Glance
Every AWS API call is authenticated at the gateway, published to a NATS subject, and answered by whichever daemon claims it. Daemons are stateless: scale horizontally by starting more. No etcd, no Kubernetes, no external control plane. Just systemd units, a NATS cluster, and your hardware. Deep dive: docs/DESIGN.md.
Self-hosted Installation
Installation requires an Ubuntu 26.04 or Debian 13 system. See the detailed documentation at docs.mulgadc.com for installing Spinifex.
Bare Metal ISO
The recommended installation is a bootable x86 installer for bare-metal hardware.
curl -fLO https://iso.mulgadc.com/spinifex.iso
Follow the USB install guide to write the ISO to USB and install on your hardware.
Single Node Install
Prerequisite: Spinifex requires a Linux bridge configured on the host for VM networking. See the single-node install guide for setup details.
curl -fsSL https://install.mulgadc.com | bash
sudo /usr/local/share/spinifex/setup-ovn.sh --management
sudo spx admin init --node node1 --nodes 1
sudo systemctl start spinifex.target
export AWS_PROFILE=spinifex
aws ec2 describe-instance-types
Development Setup
For a complete development environment see the Source Install documentation.
Spinifex UI
Spinifex ships with a built-in web console, an optional alternative to the AWS CLI, SDKs, and Terraform. If you know the AWS Management Console, the Spinifex UI fills the same role: a browser-based view of your instances, volumes, buckets, VPCs, and IAM resources, without leaving your own network.
Each node serves the console on port 3000 over TLS, and it comes up with spinifex.target:
- Same API, different surface. The UI issues the same AWS SigV4 calls the CLI does, so RBAC, audit trails, and IAM policies apply the same way.
- Single sign-on against your AWS credentials. Log in with the access keys from
~/.aws/credentialson the node where Spinifex is installed. There is no separate user database. - Self-hosted, works offline. The Spinifex binary embeds the UI and each node serves it directly, with no external CDN or analytics calls.
For the full walkthrough, covering first-time TLS certificate trust, login, and a feature tour, see Launching the Web UI in the cluster setup guide.
Development Philosophy
Built by Engineers, For Engineers
Spinifex is developed by experienced infrastructure engineers with deep AWS expertise, including former AWS team members who understand the intricacies of building production-grade cloud services. Our team brings decades of combined experience from AWS, enterprise infrastructure, and edge computing environments.
AI-Assisted Development
Spinifex is architected and implemented by experienced engineers, with Claude Code accelerating certain development tasks. The split keeps the quality and reliability standards that production infrastructure demands:
How We Use Claude Code:
- Code Generation: Boilerplate AWS API structures and handlers
- Documentation: Comprehensive development guides and API documentation
- Testing: Test case generation and validation scenarios
- Refactoring: Large-scale code restructuring and optimization
What Remains Human-Driven:
- Architecture Decisions: Core system design and scalability choices
- Security Implementation: Authentication, encryption, and threat modeling
- Performance Optimization: Real-world performance tuning and benchmarking
- Production Operations: Deployment strategies and operational procedures
Trademarks
"AWS", "Amazon Web Services", and all related service names (EC2, EBS, S3, VPC, IAM, and others) are trademarks of Amazon.com, Inc. or its affiliates. Mulga Defense Corporation and Spinifex are independent and not affiliated with, endorsed by, or sponsored by Amazon.com, Inc. or Amazon Web Services, Inc. References to AWS services describe interoperability and compatibility only.
License
Spinifex is open source under the GNU Affero General Public License v3.0, with a commercial license available. You're free to use, modify, and deploy it anywhere you need reliable infrastructure without depending on centralized cloud platforms.