Josh Siviour
91d22d9f12
* feat(security): add an nftables host firewall scoping cluster ports to peers Nodes shipped no host firewall, so every cluster listener — OVN NB/SB, the formation port, NATS, predastore — was reachable from anything that could route to the node. On a single-NIC node the planes collapse onto the public address, which made that the default rather than the exception. setup.sh installs a policy and an apply helper but does not enable them: the peer set is unknown until the cluster's planes resolve, and a drop policy with an empty set would cut the first node that applied it out of its own formation. install-node.sh writes the peers and enables the unit after formation. The policy owns only table inet spinifex_filter and replaces it in one transaction. vpcd writes MASQUERADE and per-EIP FORWARD rules into the ip nat/filter tables and reinstalls them only on start, so a whole-ruleset flush — what Debian's nftables.service does on both start and stop — would break elastic IPs silently. INPUT only, for the same reason: a forward-hook drop here could not be rescued by an accept in the other table. Guest traffic keeps working: IMDS and VPC DNS terminate on ime-* ports in the host netns, and every guest agent reaches its control plane over the AWS gateway rather than NATS, so no cluster port needs to face the guests. * feat: reconcile the host firewall peer set from the daemon The peer set was written by install-node.sh and by cluster-bootstrap.yml. That missed two of the four formation paths (bm-bootstrap.sh and the ISO firstboot), duplicated the same logic in each, and went stale as soon as a node was added or replaced. host.ReconcileFirewall now owns it: every formation path starts the daemon, and it re-runs on each startup. A node's own config names its peers by their wan address only, so a set built from config alone drops every peer's NATS, OVSDB and formation traffic. The lan plane comes from the generated NATS cluster routes and the OVN remote lists, and the vpc plane from the Southbound Encap table; an empty encap answer is an error rather than a narrower set. ProtectSystem=full applies to the sudo child too, so the root helper could not write /etc/spinifex/firewall either — it is now in the daemon's ReadWritePaths, optional so a node installed before the firewall stage still starts. The apply helper gains set-peers and disable verbs, re-validates every address as a dotted quad with in-range octets, and rolls the peer file back if the ruleset will not load. * fix: retry the host firewall reconcile until every chassis registers The peer set is only safe to write once OVN reports an encap address for every node. On a fresh bootstrap the daemon routinely wins the race against ovn-controller, so a single startup attempt saw a partial chassis list and either wrote a set that dropped Geneve from the nodes missing from it, or failed outright and left the node with no policy until a restart. Gate on the full chassis count and schedule the reconcile instead of running it once: back off from 15s to 5m while it fails, then re-run every 5m so a node added or replaced after formation is picked up without a daemon restart. An unchanged peer set short-circuits before the helper runs. * test: cover the firewall chassis quorum gate in the multinode e2e suite A partial chassis list is the normal state early in a bootstrap, and writing a peer set from one produces a firewall that drops Geneve from every node missing from it. The gate that refuses that write had no live coverage: a 5-node bootstrap converges too fast for any daemon to observe a partial list, so the verification run only ever exercised the OVN-unreachable path. Reach the branch by inflating the expected count instead of breaking OVN: a phantom node in one node's config makes the cluster one chassis short, with nothing in the Southbound DB disturbed. Asserts the gate logs, that no peer file is written while it holds, that the loaded ruleset survives, and that the node recovers to a byte-identical peer set once the phantom is removed.
What is Spinifex? · Platform · Deploy · AWS Compatibility · Components · Architecture · Installation · Docs
Spinifex: the open, AWS-compatible cloud you run yourself
Spinifex, built by Mulga, recreates the AWS services your software already uses (EC2, EBS, S3, VPC, IAM) on infrastructure you control. Move workloads off the hyperscalers, run AI at a fraction of the cost, or take the cloud to the edge, without rewriting a line. The exact build you ship to AWS, Spinifex serves on your own hardware: same APIs, same Terraform, same SDKs.
What is Spinifex?
Spinifex is an open-source infrastructure platform that recreates the AWS service surface (EC2, EBS, S3, VPC, IAM) on bare-metal, edge, and on-premises environments. Run cloud-native software without a hyperscaler.
Most AWS alternatives wrap an API and call it a cloud. We rebuilt the engineering underneath: distributed object storage with erasure coding, block storage built to survive failure, and compute on bare metal. That depth is the reason your software runs unchanged, instead of rewritten.
It's built for teams that need:
- The AWS tooling they already use (AWS CLI, SDKs, Terraform), with nothing to rewrite
- Full control of the stack: your hardware, your network, your data, your keys
- A cloud that keeps running offline, through disconnection, with no external control plane
- An open core (AGPL-3.0), auditable and yours to keep, with no lock-in
You change where your software runs, not what it is.
The Platform
From commodity hardware up to unmodified AWS tooling, every layer is replaceable and yours to own.
Three Ways To Deploy
One AWS-compatible surface, three deployment shapes. Pick the one that matches your reality; the platform on top is the same.
Neocloud
Lift and shift onto a partner Neocloud. Move workloads off the hyperscalers and onto our Neocloud partner ecosystem without rewriting them. GPU capacity (H100 / H200 / B200), cheaper, available now. Change an endpoint, keep the software.
On-premise
Bring your own hardware and host Spinifex in your own data centre. A real multi-node HA cluster integrated with your storage and networking, with full control of stack, data, and jurisdiction. A predictable bill, no egress surprises, an auditable open-source core.
Edge
Cloud where the cloud can't reach. Air-gapped sites, vehicles, vessels, factories, and clinics. Compute next to the data, running through disconnection, on hardware you own. The same AWS APIs your software already uses.
AWS Compatibility
Speak the AWS API surface, natively. The AWS SDKs, AWS CLI, and Terraform: everything you deploy on AWS deploys on Spinifex unchanged. At the edge, on-premise, or on a partner Neocloud.
| Service | What it is | Status |
|---|---|---|
| EC2 | Compute | Available |
| EBS | Block Storage | Available |
| S3 | Object Storage | Available |
| VPC | Networking | Available |
| IAM | Identity & Auth | Available |
| ALB / NLB | Load Balancers | Available |
| EKS | Kubernetes | Available |
| ECR | Container Registry | Available |
| ECS | Container Service | Available |
| RDS | Databases | Available |
| Bedrock | AI Deployment | Q3 2026 |
Roadmap items ship under the same AWS API surface. Code written for AWS today keeps working the moment they land. Track what's shipped in the release notes.
Core Components
Spinifex (Compute Service – EC2 Alternative)
Spinifex is a minimal VM orchestration layer built on top of QEMU, exposing APIs similar to EC2. It manages lifecycle operations like start, stop, and terminate, using QEMU's QMP interface. Designed to be straightforward and scriptable, Spinifex lets you launch VMs using the AWS CLI, SDKs, or Terraform—without needing Kubernetes or heavyweight orchestrators. Keep in mind, you can also setup a Kubernetes environment using Spinifex with underlying instances.
- EC2-like VM management on bare metal
- Launches with cloud-init metadata support
- Works with standard AWS tooling
Viperblock (Block Storage – EBS Alternative)
Viperblock is a high-performance, WAL-backed block storage service that replicates volumes across multiple nodes. It's built for reliability and speed, with support for snapshots, recovery, and direct connection to QEMU instances using NBD or virtio-blk.
- Fast, durable virtual disks
- Replication for resilience
- Exposed over NBD or embedded in VMs
- Supports high performance WAL logs using local NVMe drives to reduce IO traffic to S3.
- In memory read/write block cache for blazing performance.
Predastore (Object Storage – S3-Compatible)
Predastore is a fully S3-compatible object storage system. It supports the AWS S3 API, including Signature V4 authentication, multipart uploads, and Terraform provisioning. Data is chunked and distributed across nodes using Reed-Solomon erasure coding, making it fault-tolerant and ideal for large-scale or low-bandwidth scenarios.
- S3-compatible API and auth
- Multipart uploads, streaming reads/writes
- Data redundancy with Reed-Solomon encoding
Northstar (Authoritative DNS)
Northstar is a lightweight authoritative DNS server that handles both internal service discovery and public-facing DNS for a Spinifex cluster. Zones are human-readable TOML files, served from the local filesystem or synced from Predastore, keeping DNS configuration in the same object storage as the rest of your infrastructure.
- Authoritative DNS over UDP, TCP, and DNS-over-TLS
- Service discovery for cluster components via SRV records
- Zone files stored locally or in S3-compatible storage
Architecture at a Glance
Every AWS API call is authenticated at the gateway, published to a NATS subject, and answered by whichever daemon claims it. Daemons are stateless: scale horizontally by starting more. No etcd, no Kubernetes, no external control plane. Just systemd units, a NATS cluster, and your hardware. Deep dive: docs/DESIGN.md.
Key Features
- AWS-compatible APIs. Use the AWS CLI, SDKs, and Terraform you already know. Repoint your endpoint and ship; nothing to rewrite.
- Zero cloud dependency. Runs entirely on your hardware. No phone-home, no control plane, no external authority. Works fully offline.
- Bare-metal compute. QEMU-based with direct hardware access. No hypervisor tax, no abstraction overhead.
- Built-in storage. Block and object storage included: NVMe caching, Reed-Solomon erasure coding, and replication out of the box.
- Edge-first architecture. Designed for disconnected, contested, and resource-constrained environments from day one.
- Open core, no lock-in. AGPL-3.0 with a commercial option. Inspect it, modify it, deploy it. The platform is yours to keep.
Installation
Installation requires an Ubuntu 26.04 or Debian 13 system. See the detailed documentation at docs.mulgadc.com for installing Spinifex.
Bare Metal ISO
The recommended installation is a bootable x86 installer for bare-metal hardware.
curl -fLO https://iso.mulgadc.com/spinifex.iso
Follow the USB install guide to write the ISO to USB and install on your hardware.
Single Node Install
Prerequisite: Spinifex requires a Linux bridge configured on the host for VM networking. See the single-node install guide for setup details.
curl -fsSL https://install.mulgadc.com | bash
sudo /usr/local/share/spinifex/setup-ovn.sh --management
sudo spx admin init --node node1 --nodes 1
sudo systemctl start spinifex.target
export AWS_PROFILE=spinifex
aws ec2 describe-instance-types
Development Setup
For a complete development environment see the Source Install documentation.
Component Repositories
Spinifex coordinates these independent components:
- Predastore - S3-compatible object storage
- Viperblock - EBS-compatible block storage
- Northstar - Authoritative DNS server
Each component can be developed independently. See component-specific documentation for focused development guides.
Spinifex UI
Spinifex ships with a built-in web console — an optional alternative to the AWS CLI, SDKs, and Terraform. If you're familiar with the AWS Management Console, the Spinifex UI fills the same role: a browser-based view of your instances, volumes, buckets, VPCs, and IAM resources, without leaving your own network.
The console is served by each node on port 3000 over TLS, and becomes available as soon as spinifex.target is up:
- Same API, different surface. Every action in the UI is the same AWS SigV4 call the CLI makes — so RBAC, audit trails, and IAM policies apply uniformly.
- Single sign-on against your AWS credentials. Log in with the access keys from
~/.aws/credentialson the node where Spinifex is installed — no separate user database. - Self-hosted, works offline. The UI is embedded in the Spinifex binary and served from the node itself. No external CDN, no analytics calls, no cloud dependency.
For the full walkthrough — first-time TLS certificate trust, login, and feature tour — see Launching the Web UI in the cluster setup guide.
Development Philosophy
Built by Engineers, For Engineers
Spinifex is developed by experienced infrastructure engineers with deep AWS expertise, including former AWS team members who understand the intricacies of building production-grade cloud services. Our team brings decades of combined experience from AWS, enterprise infrastructure, and edge computing environments.
Real-World Experience:
- Production AWS service development and operations
- Large-scale infrastructure deployment and management
- Edge computing and resource-constrained environments
- Enterprise security and compliance requirements
AI-Assisted Development
While Spinifex is architected and implemented by experienced engineers, we leverage Claude Code (Anthropic's AI coding assistant) to accelerate certain development tasks. This approach combines human expertise with AI efficiency:
How We Use Claude Code:
- Code Generation: Boilerplate AWS API structures and handlers
- Documentation: Comprehensive development guides and API documentation
- Testing: Test case generation and validation scenarios
- Refactoring: Large-scale code restructuring and optimization
What Remains Human-Driven:
- Architecture Decisions: Core system design and scalability choices
- Security Implementation: Authentication, encryption, and threat modeling
- Performance Optimization: Real-world performance tuning and benchmarking
- Production Operations: Deployment strategies and operational procedures
This hybrid approach ensures Spinifex benefits from both proven engineering expertise and modern development acceleration, while maintaining the quality and reliability standards required for production infrastructure.
Trademarks
"AWS", "Amazon Web Services", and all related service names (EC2, EBS, S3, VPC, IAM, and others) are trademarks of Amazon.com, Inc. or its affiliates. Mulga Defense Corporation and Spinifex are independent and not affiliated with, endorsed by, or sponsored by Amazon.com, Inc. or Amazon Web Services, Inc. References to AWS services describe interoperability and compatibility only.
License
Spinifex is open source under the GNU Affero General Public License v3.0. You're free to use, modify, and deploy it anywhere you need reliable infrastructure without depending on centralized cloud platforms.