* refactor(kms): share the DEK spec mapping and stop re-parsing opened envelopes
- generate_key_material is now the single spec->length mapping for every
backend that mints DEKs itself; the inline copies in the Static and Local
backends are gone, and ChaCha20 (32 bytes, same as AES_256) is accepted
uniformly instead of only by Static.
- The pub(crate) client decrypt of the Local, Vault KV2 and Vault Transit
backends returns (plaintext, master_key_id), so KmsBackend::decrypt no
longer re-parses the envelope it just opened (one JSON parse per SSE GET
instead of two, and unknown-field observability is no longer double-counted).
- Malformed-envelope parse failures now report CryptographicError("parse")
on all backends; Local was the last one mapping them to SerializationError.
- The four KmsBackend::generate_data_key adapters take fields out of
DataKeyInfo instead of cloning, dropping a redundant un-zeroized plaintext
DEK copy and a full ciphertext clone per call; a missing plaintext now
fails closed everywhere instead of returning an empty key on three of four
backends.
* test(kms): pin legacy header fallback, stored-AAD, and decrypt key-id contracts
- a_legacy_aws_kms_object_without_the_cipher_header_still_opens rebuilds the
true pre-internal-header shape (aws:kms mode + S3 key-id header, no
x-rustfs-* headers) and asserts the fallback normalizes the cipher and
re-projects it.
- a_rewritten_sse_c_context_header_fails_authentication is the SSE-C flank of
the stored-AAD tamper check; metadata_without_stored_context_bytes_still_opens
covers the derived-AAD path for both flavours and pins the seal side to the
canonical bytes (mutation-verified).
- data_key_spec_controls_the_length_of_the_generated_key requires every
backend in the matrix to honour all three specs, asserts the envelope
records the requested spec, and round-trips each blob.
- corrupt_ciphertext_fails_cleanly pins unparseable ciphertext to
CryptographicError instead of merely not-InternalError.
- Deleted the never-called assert_validation_error / assert_cryptographic_error
helpers.
rustfs/backlog#1636 rejected a built-in rotation scheduler: rotation is a policy decision with a per-backend cost and a hard upgrade-ordering constraint, and a server that rotated on its own would make that decision on an operator's behalf at a moment they did not choose. This is what that issue resolved to deliver instead — the signal, without the actuator.
RUSTFS_KMS_ROTATION_MAX_AGE_SECS names the period. Unset leaves the verdict unreported rather than assuming a policy, because how often keys must be rotated is a compliance decision and a built-in default would report keys as overdue against a rule nobody wrote; an unparsable value is refused the same way, loudly. Values below an hour are raised to it, since a threshold of seconds reports every key as overdue moments after it was rotated and teaches operators to ignore the signal.
KeyInfo gains rotation_due and rotation_due_reason, both additive on the wire and both filled in by the manager rather than by each backend, so no two backends can disagree about what overdue means. A backend that does not advertise rotation reports unsupported and is never reported as due — it must not be told to do something it cannot. A key with no recorded rotation is measured from creation, which is how long its material has actually been in use, and is distinguished from a stale rotation so an operator can tell "overdue again" from "never once". Ages are computed saturating, so a timestamp from a node running ahead cannot manufacture an overdue key.
The verdict is advisory in the strongest sense: nothing consults it before encrypting or decrypting, a key reported as due keeps serving traffic, and readiness is unaffected.
The single-key describe response deliberately does not carry the verdict. Its type records a creation date but no rotation timestamp, so a verdict computed there could not tell a key rotated last week from one never rotated, and reporting never_rotated for a key that was in fact rotated is worse than reporting nothing.
The wraps-based branch the issue also specifies is not implemented: it depends on the per-key wrap accounting that does not exist yet.
A key that cannot be described was handled two incompatible ways. Vault KV2 swallowed every describe failure and dropped the key from the page, so a damaged or newer-format record silently disappeared from the operator's inventory and from the deletion sweep's census. Local failed the whole listing instead, so one bad record stopped every scheduled deletion on the node for as long as the damage lasted. Both force a per-key problem into a whole-page answer.
ListKeysResponse now carries unreadable_key_ids, and the backends that read local key records classify per-key failures in one place: KeyNotFound is a concurrent deletion and is skipped, a material-level error names the key on the page, and anything else fails the listing, because it says nothing about a particular key and reporting it as key damage would turn a backend outage into a false data-loss alarm. A listing that covered the entire key set and found nothing readable still fails, since an empty page there is indistinguishable from a deployment with no keys; the guard is scoped to a page with no successor so a damaged key can never strand the keys behind it. The deletion sweep destroys the expired keys it can read, counts the unreadable ones, and withholds its lifecycle gauges rather than publishing a census over a key set it did not fully see.
Vault Transit needs the same treatment and is easy to miss: its per-key metadata records live in KV2 too, so folding every non-404 failure into a backend error left its per-key classification unreachable and one metadata record written by a newer build still failed every listing on the node.
Vault KV2 record reads gain the typed errors this needs: an unparseable body is MaterialCorrupt and an absent data envelope is MaterialMissing, where both were previously indistinguishable from Vault being unreachable. Only the parse failure's category and position are reported, because serde's own message embeds the offending scalar and that message reaches a log line and an admin HTTP body.
The admin list handlers refuse a malformed limit with 400 instead of silently substituting the default page size, and every page is capped at 1000 where it is cut, so a single request can no longer fan out one metadata lookup per key without bound. The four operation-level KMS metrics gain a backend label, since operation names are shared across backends and a Transit latency regression was previously indistinguishable from an AWS one. The Static backend captures its reported creation date once instead of reading the clock on every describe and list. POST /kms/clear-cache gains a named response type with an unchanged wire shape.
* Add black-box behavior tests for KMS resilience and serialization
* fix(kms): repair unopenable ciphertext across backends
Black-box testing of the KMS crate surfaced several defects that make
encrypted data permanently unreadable.
Symmetric envelopes. The Local and Vault Transit backends returned raw
cipher output from `encrypt` while `decrypt` parsed a JSON envelope, so
anything sealed through the master-key path could never be opened again.
Local also discarded the AES-GCM nonce. Both now emit the same envelope
`decrypt` consumes, matching the Static backend.
Deterministic AAD. The object layer derived AEAD additional data by
serializing a `HashMap` directly. Iteration order differs per instance,
so a context rebuilt from storage produced different AAD bytes than the
one used to seal and the object stopped opening. Ordering by key removes
that dependency, matching the Static backend's existing `context_aad`.
Objects written with the default single-key context are unaffected,
since a one-entry map has only one serialization.
Cipher in the header projection. `metadata_to_headers` recorded the SSE
mode (`AES256` / `aws:kms`), which cannot represent ChaCha20-Poly1305,
so a ChaCha-sealed object came back claiming `aws:kms` and was opened
with the wrong cipher. The cipher now travels in
`x-rustfs-encryption-algorithm` — the header the storage layer already
reads but nothing ever wrote. Objects without it fall back as before.
Also: the Static backend ignored `key_spec` and always issued 256-bit
data keys; Local `list_keys` hardcoded `truncated: false`, ignored
`marker`, and paginated over unordered `read_dir`, so a paginating
client silently saw a partial key list; and Local and Vault KV2 reported
`key_id: "unknown"` from `decrypt` despite the envelope naming the
master key.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* test(kms): cover both Vault backends and key rotation
The behavior suite ran only against Local and Static, and its own harness
documented the gap: the Vault backends had no business-capability
coverage at all. Setting `RUSTFS_KMS_VAULT_TOKEN` now adds Vault KV2 and
Vault Transit to every `for_each_backend` spec against a live server.
That lane is what surfaced the Transit envelope defect fixed in the
previous commit.
`rotate` and `versioning` are advertised only by the Vault backends, so
until now every capability-gated branch for them took the
`UnsupportedCapability` side and the working half was never asserted — a
rotation that dropped prior key versions would have gone green. The new
`behavior_rotation.rs` pins that half: material sealed before a rotation
still opens after it, repeated rotations accumulate versions rather than
overwriting a single spare, and the history survives a restart.
Two test defects fixed. `objects_round_trip_across_sizes_and_algorithms`
asserted a 1-byte object differs from its own ciphertext, which collides
once every 256 runs; the assertion now applies only where a collision is
not realistic, and small objects stay covered by the tag check and the
decrypt round-trip. `test_from_env_selects_token_file` depended on
`RUSTFS_KMS_VAULT_TOKEN` being absent from the caller's environment and
now clears it explicitly.
The snapshots directory was also removed from `.gitignore`: insta
snapshots are the assertions themselves, so leaving them untracked gives
CI nothing to compare against. Only `.snap.new` scratch files are
ignored now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* test(kms): adapt behavior suite to current key APIs
Rebasing onto main brought four API changes the suite predates.
`DeleteKeyRequest` gained `confirm_key_id`, and immediate deletion is now
gated on the server's `allow_immediate_deletion`. Scheduled deletions pass
`None`; the four specs that destroy a key outright echo the key id back
and opt the harness config in, which is what the gate asks of a real
caller.
`LocalBackupExportRequest` gained `sanitized_config`. These specs cover
the key-material path, so they seal no configuration and pass `None`.
`KmsCacheStats` became a named struct with real hit, miss, and eviction
counters. `cache_stats_returns_an_entry_count_and_no_hit_or_miss_data`
existed to pin the old placeholder behavior — that the second tuple
element was always zero — which main has since fixed, so it is now
`cache_stats_reports_hits_and_misses_separately` and asserts the counters
actually move.
Starting the service provisions the reserved probe key, so it shows up in
listings and backup bundles. Exact-set assertions filter it through a new
`without_probe_key` helper rather than naming it, keeping those specs
about the keys they seeded.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(kms): bind the AAD to the stored context bytes
Review caught that canonicalizing the AAD on decrypt breaks objects sealed
before canonicalization existed, and it was right. The AAD is the
*serialization* of the encryption context, and `x-rustfs-encryption-context`
stores that exact byte sequence: `encrypt_object` fed one `HashMap` to the
AEAD and then moved the same map into the metadata the header is written
from, so the stored string is byte-identical to the AAD the object was
sealed under. Those objects are therefore recoverable — but only while
nothing round-trips the value through a `HashMap` and re-serializes it.
Recomputing sorted AAD on decrypt would have turned a readable object into
a permanently unreadable one. The previous behavior was worse than the
first analysis credited: it did not merely fail intermittently, it made
the failure deterministic.
`EncryptionMetadata` now carries `context_aad`, the bytes the object was
actually sealed with. Encryption records what it fed the AEAD, the header
projection stores those bytes verbatim (and preserves a legacy ordering
across a re-projection rather than rewriting it into sorted form), and
`headers_to_metadata` carries the stored string through untouched. Both
decrypt paths, SSE-KMS and SSE-C, prefer it and fall back to canonical
serialization only when no stored serialization exists. Canonicalization
still applies to everything newly sealed, so the original ordering bug
cannot recur.
Two tests pin this: a legacy record whose sealed bytes are non-canonical
must survive a full header round trip unchanged, and a context header
rewritten to an equivalent-but-reordered serialization must fail
authentication rather than silently re-deriving a working AAD. Both were
mutation-checked against the reinstated bug on each side.
Also from review: the lifecycle churn test asserted only that every
request was accounted for, which holds whether the state gate exists or
not, so both branches are now pinned deterministically after the churn
(asserting `refused > 0` on the concurrent phase would only trade the hole
for a scheduling flake). And the Local and Vault KV2 envelopes compare
`encryption_context` without authenticating it — `DekCrypto` seals only
the plaintext — which is now documented at both sites; closing it needs a
versioned envelope, since existing ciphertext was sealed without AAD.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* feat(kms): add data key rewrap and wrapping inspection primitives
Rewrap re-protects an existing data key envelope with the master key's
current version without touching the data key itself, which is the
precondition for ever retiring an older version: until every envelope a
version wrapped has been moved off it, destroying that version orphans
every object whose data key it wrapped.
Adds KmsBackend::rewrap_data_key and its read-only counterpart
describe_data_key_wrapping, both gated by a new BackendCapabilities::rewrap
flag and defaulting to UnsupportedCapability. Vault KV2 unwraps with the
frozen version record that wrapped the envelope and re-wraps with the
current material; Vault Transit uses the native transit/rewrap endpoint so
the data key never enters this process.
No read or write path changes: nothing calls these yet.
* test(kms): cover the rewrap primitive against a scripted Vault
* fix(kms): resolve both key materials before the data key is unwrapped
Keeps every fallible step out of the window in which the plaintext data
key exists, so no error path can drop it without zeroizing it first.
* fix(kms): page the Local key listing so the deletion sweep sees every key
The Local backend answered every ListKeys with the first `limit` entries of
`read_dir` and a hardcoded `truncated: false`, so the deletion sweep ended
after one page: on a deployment with more keys than a page, expired key
material past the first page was never destroyed, and the lifecycle gauges
published that partial page as if it were the whole key set.
Listing now orders the key set by identifier and pages through it, with the
marker as an exclusive lower bound on the identifier rather than an index, so
a key added or removed between pages — including the marker key, which the
sweep itself destroys — cannot make the listing skip keys or restart. Only the
page is read from disk, so a list costs the requested limit rather than the
size of the key set.
The pagination arithmetic lives in a shared helper so the other self-paging
backends can adopt the same semantics, and the sweep now stops instead of
re-listing when a backend hands back the cursor it was just given.
* fix(kms): give ListKeys a defined zero-limit and cursor contract
`GET /rustfs/admin/v3/kms/keys?limit=0` reached the Vault KV2 and Vault
Transit backends as a page size of zero, where the page arithmetic indexed the
element before an empty page and aborted the request. Both backends also
resolved the marker by searching for it in the key list, so a marker naming a
key that had since been removed silently restarted the listing from the
beginning instead of resuming after it.
All four self-paging backends now share one contract: a zero limit is answered
as an empty, non-truncated page without reaching the backend at all, and the
marker is an exclusive lower bound on the key identifier rather than a position
in the list. The Vault backends read metadata only for the page they return,
so a list costs the requested limit instead of the whole key set, and KV2 now
applies the usage and status filters it previously accepted and ignored.
* test(kms): cover KV2 decrypt of pre-rotation envelopes offline
The forward half of the rotation contract - an envelope written before a
rotation still decrypts after it - was only exercised by the #[ignore]
live-Vault tests, so CI never verified it. The offline layer only had the
negative cases (a regressed version pointer must fail closed).
Drive encrypt -> rotate -> decrypt over the scripted Vault responder,
folding what each rotation writes back into the served state so the
material the decrypt resolves is the material the rotation persisted.
Also cover two consecutive rotations and pin that new envelopes carry the
rotated version.
* test(kms): cover Transit decrypt of pre-rotation data keys offline
Vault owns the transit crypto, so the offline responder cannot prove the
round trip - that stays in the #[ignore] live test. What it can pin is the
client-side wiring: after a rotation records the version bump, decrypting
a data key generated before it must forward the historical vault:v1:
ciphertext to Vault byte for byte and return the material Vault hands
back.
* fix(kms): honour the configured metadata cache TTL and metrics switch
KmsManager::new built the KmsCache from cache_config.max_keys alone, so
cache_config.ttl was dead configuration: every deployment ran the
hardcoded 300s window whatever the admin configure API was given, while
CacheSummary and the KMS config endpoint reported the configured value
back. cache_config.enable_metrics was never read anywhere.
Build the cache from the whole CacheConfig. The documented default is
reconciled down to the 300s the cache has always used rather than up to
the advertised 3600s, and now lives in one place (DEFAULT_CACHE_TTL)
instead of being duplicated across the four configure-request
converters, so the default path behaves exactly as before.
Behaviour change: a deployment configured through the admin API already
has ttl 3600 persisted, because the old converters wrote that default
into the stored config, so its describe_key staleness window widens from
an effective 300s to the 3600s it asked for. No cryptographic or
authorization path widens - encrypt, decrypt and generate_data_key go
straight to the backend and never read this cache. The Vault Transit
backend's own metadata cache, which does gate crypto through
ensure_key_state_allows, stays fixed at 300s and is now documented as
deliberately not operator-tunable.
The configured duration now reaches moka's builder, which panics above
1000 years, so CacheConfig::effective_ttl clamps to a 24h maximum the
way effective_timeout already clamps its own, and validate rejects a
zero TTL beside the existing max_keys check. Both config summaries and
the KMS config endpoint report the effective value, so the admin API
cannot advertise a lifetime the cache does not honour.
enable_metrics gates publication of the rustfs_kms_metadata_cache_*
families only; the counters behind the admin status API keep running
either way. No configure-request field sets it yet.
Refs rustfs/backlog#1584
* docs(kms): state why the Transit metadata TTL is not bound to the default
The comment claimed the constant matches config::DEFAULT_CACHE_TTL, which
reads as an invariant the code does not enforce. Say plainly that the
equality is a coincidence rather than a contract, and why binding the two
would be wrong: this cache gates crypto through ensure_key_state_allows,
so a later change to the operator-facing describe-cache default must not
be able to widen its staleness window.
* fix(kms): drop the KmsClient trait import removed by #5501
The local backup export tests (#5499) merged after #5501 folded the
KmsClient trait into KmsBackend, leaving a dead trait import that breaks
'cargo test -p rustfs-kms' compilation on main. create_key is an inherent
method on LocalKmsClient since #5501, so the import is unnecessary.
* fix(kms): CAS Transit metadata writes and bound the metadata cache
Transit KV metadata writes were whole-record overwrites with no
precondition, so two nodes mutating the same key could silently clobber
each other's lifecycle state, and the process-local metadata cache had
neither a TTL nor a capacity bound, so a key disabled or scheduled for
deletion on one node stayed usable on every other node until restart.
- Replace write_metadata_to_kv with a versioned read
(read_metadata_from_kv_versioned) plus a check-and-set write
(cas_write_metadata_to_kv); mutate_key_metadata re-reads the
authoritative record and re-runs the state gate on every attempt, and a
lost CAS race retries with a fresh snapshot (bounded budget) instead of
replaying the stale one.
- Migrate every read-modify-write caller: enable, disable, schedule and
cancel deletion, rotate version bump, the expired-key tombstone, and
both create paths (create-only CAS that read-confirms the winner on a
lost race).
- Bound the metadata cache with moka (300s TTL, 1024 entries) and drop a
key's entry when a transit data call reports it gone server-side.
- Fail closed when the synthesized-metadata fallback cannot be read or
persisted: the fabricated Enabled record is only served after a durable
create-only CAS write, closing the gate weakening documented as a KNOWN
RISK; the persistence fallback for pre-metadata keys is kept.
Refs rustfs/backlog#1581 (part of rustfs/backlog#1562)
* test(kms): add a scripted loopback Vault for policy wiring tests
A minimal HTTP/1.1 responder that serves canned Vault responses in order
and records the method/path sequence, so wiring tests can assert exactly
how many requests a code path performed (retries, read-confirm) without
a live Vault server.
* feat(kms): route Vault operations through the retry policy engine
Wire every outbound vaultrs call in the KV2 and Transit backends through
policy::execute, completing the wiring half of the operation policy work
(the engine landed separately):
- Reads (KV2 read/read_metadata/read_version/list, transit read/list/
encrypt/decrypt, health checks) run as ReadIdempotent: bounded retries
with exponential backoff and jitter on 429, recoverable 5xx, and
connection-level failures; 400/401/403/404 stay fatal.
- Writes (KV2 set/CAS set/delete_metadata, transit create/update/rotate/
delete, metadata writes) run as MutatingNonIdempotent: exactly one
attempt under the per-attempt timeout, never replayed. CAS conflicts
in the rotation protocol pass through unchanged as the concurrency
signal they are.
- Each attempt takes a fresh credential snapshot, so a retry after a
credential rotation uses the new token.
- Read-confirm recovery for lost create responses: when a create finds
an existing key that is exactly what it would have produced (same
algorithm, enabled, usable material, and for request-level creates the
same usage/description/tags), it reports the stored key as the create
result instead of KeyAlreadyExists. Any divergence keeps failing.
- Deletes treat already-deleted records as completed deletes (KV2
version records; transit metadata already did), so re-running an
interrupted deletion converges.
- A failed existence pre-check inside create now fails the create
instead of falling through to a blind overwrite (fail closed).
- The policy module sheds its allow(dead_code) now that it is wired.
Wiring tests run against a scripted loopback Vault and assert request
counts and endpoints for the retry, single-attempt, CAS-conflict, and
read-confirm paths.
Refs rustfs/backlog#1569 (part of rustfs/backlog#1562)
* feat(kms): enforce shared key state machine across backends
Unify the key state x operation matrix behind a single gate in
backends/mod.rs and wire it into the Local, Vault KV2 and Vault Transit
backends: Disabled keys reject encryption, data key generation and
rotation while still allowing decryption and lifecycle recovery;
PendingDeletion keys reject everything except decryption and
cancellation (including repeated deletion scheduling); cancellation now
requires an actual pending deletion everywhere. This closes the missing
gates on KV2 encrypt/generate and Local generate_data_key, and stops
enable_key from silently reverting a pending deletion.
Decryption is deliberately left ungated in Disabled/PendingDeletion — an
explicit, documented and tested deviation from AWS KMS, since gating it
would break reads of existing objects the moment a key is disabled.
Add shared contract tests driving the full matrix offline for Local (and
via ignored tests against a live Vault for KV2/Transit), a stateless
contract for Static, an SSE-shaped regression proving existing envelopes
stay decryptable after disable, and a pin on the known-risk Enabled
default of Transit's synthesized metadata fallback.
Refs rustfs/backlog#1571 (part of rustfs/backlog#1562)
* feat(kms): persist deletion deadlines and run a restartable deletion worker (#5491)
* feat(kms): add AppRole configuration surface for Vault auth
Extend VaultAuthMethod::AppRole with secret_id_file (re-read on every
login so external rotation is picked up), a configurable auth mount
(default "approle"), and an optional fail-closed safety window. All new
fields are serde(default) so previously persisted configurations keep
deserializing, and the strict admin-configure deserializer accepts them
as optional.
Environment selection: setting RUSTFS_KMS_VAULT_APPROLE_ROLE_ID switches
both Vault backends to AppRole; the secret_id comes from
RUSTFS_KMS_VAULT_APPROLE_SECRET_ID_FILE (path stored, file wins) or
RUSTFS_KMS_VAULT_APPROLE_SECRET_ID, following the static secret-key file
precedent. validate() rejects AppRole configs without a role_id, without
any secret_id source, or with an empty mount.
Also append the CredentialsUnavailable error variant used by the
fail-closed credential gate.
* feat(kms): implement AppRole login with background renewal and fail-closed expiry
Implement the AppRoleLogin token source (vaultrs approle login +
renew-self) and wire lease-bound credentials through the provider:
- Each successful login/renewal installs a new client generation in the
ArcSwap; in-flight requests finish on the generation they captured.
- A background renewal task refreshes at half the lease TTL: renewable
tokens are renewed in place, everything else (or a failed renewal)
falls back to a fresh login. Auth exchanges run under the typed retry
policy (OpClass::Auth) and failed cycles retry on a fixed cadence, so
the provider recovers once Vault does.
- Fail-closed: current() refuses to hand out a token inside the
configured safety window of its expiry (default: one attempt timeout),
returning CredentialsUnavailable instead of sending a request whose
token may lapse mid-flight.
- Refreshes are single-flight: concurrent triggers for the same
generation coalesce into one login.
- The renewal task's owner handle lives on the KMS service version:
stop() shuts it down explicitly and reconfigure recycles it via
cancel-on-drop when the old version is discarded.
- The secret_id file is re-read on every login attempt; missing or empty
files fail the attempt without contacting Vault. Crate-owned copies of
tokens and secret_ids are zeroized on drop, and Debug output of every
credential-carrying type stays redacted (leak regression tests).
The renewal machinery is covered by paused-clock tests driving a
scripted token source: renew-at-half-TTL timing, login fallback,
fail-closed window entry and recovery, prompt task recycling, and
coalesced concurrent refreshes.
* feat(kms): add Vault Agent token file authentication
Add the TokenFile source: the token is read from an agent-managed sink
file (RUSTFS_KMS_VAULT_TOKEN_FILE or the TokenFile auth config) and
re-read once per poll interval (default 30s) through the existing
renewal loop, so a token rotated by the agent installs a new client
generation within one poll of the atomic replace. Each successful read
extends the token's observed validity to twice the poll interval; a
file that disappears or turns empty keeps failing the refresh until the
fail-closed window trips, and heals the provider as soon as it is
restored.
Reads are strict and never contact Vault on failure: the file must be
non-empty after trimming, and on Unix group/other permission bits are a
hard error (mirroring the SFTP host-key rule). Rotation detection uses
a content digest; the token itself is never stored on the source and
the crate-owned copy is zeroized.
Configuring the token file together with AppRole or an explicit static
token is rejected as a configuration error. All new config fields are
serde(default) and the strict admin-configure deserializer accepts the
new variant.
Covered by paused-clock tests (atomic replacement installs a new
generation next cycle, deletion fails closed and recovers, prompt task
recycling) plus negatives for missing/empty/over-permissive files and a
Debug leak regression.
* docs(kms): add Vault authentication and credential lifecycle runbook
Cover choosing between static token, AppRole, and Vault Agent token
file auth; AppRole role setup with SecretID delivery and rotation;
Agent sink deployment with the permission requirements; and the
fail-closed window semantics with a troubleshooting table keyed on the
renewal task's log lines.
* feat(kms): retain historical master key versions for Vault KV2 rotation
Rotation previously had to be rejected outright because replacing the
stored material would orphan every DEK wrapped by earlier versions.
Vault KV2 now keeps each version's material in an immutable, create-only
record at {prefix}/{key_id}/versions/{N} and treats the top-level record
as the current-version pointer plus fast-path material copy:
- decrypt resolves the envelope's master_key_version to its version
record; a missing version fails closed with KeyVersionNotFound and
never falls back to the current material
- envelopes without a version (pre-versioning writers) resolve to the
baseline_version frozen at the key's first rotation, so never-rotated
keys behave exactly as before
- generate_data_key stamps the wrapping version from the same key record
snapshot that supplied the material
- rotate_key commits in check-and-set order: freeze baseline, persist
the next version's material, then switch the current pointer; any
failure leaves the current pointer untouched, and concurrent rotations
serialize on the CAS writes with monotonically unique versions
- key listings drop the versions/ directory entries and physical key
deletion purges version records before the key record
Refs rustfs/backlog#1565
* test(kms): pin rotation contracts across backends and document retention
Completes the backlog#1565 series with the cross-backend regression net
and operator documentation:
- Vault Transit: ignored integration test proving version-prefixed
historical ciphertext still decrypts after rotation, with no
RustFS-side version bookkeeping in the envelope
- Local: offline mixed-format test interleaving pre-versioning and
versioned envelopes through a rejected rotation; the existing
rotation-rejection pinning test already covers material immutability
- docs: kms-backend-security.md gains the KV2 versioned retention
model, version record retention/destruction preconditions, and the
upgrade-before-first-rotation cluster constraint
Refs rustfs/backlog#1565
* fix(kms): repair vault test call sites missed by the timeout refactor
Three offline tests still constructed VaultKmsClient with the pre-#5472
single-argument signature, leaving cargo test -p rustfs-kms unable to
compile. Pass the same 30s attempt timeout the neighbouring tests use.
* refactor(kms): route Vault clients through a rotatable credential provider
Both Vault backends previously built a VaultClient in their constructor
and held it for the lifetime of the backend, which leaves no seam for
re-authentication: rotating credentials would require tearing down the
whole backend.
Introduce backends/vault_credentials with a TokenSource trait (only
StaticToken for now; AppRole login and agent token files land in
follow-ups) and a VaultCredentialProvider that owns the authenticated
client behind an ArcSwap. Request paths take a per-call snapshot via
current(), so a future rotation swaps in a new client generation without
interrupting calls already in flight. Tokens held by this crate are
zeroized on drop, and Debug output of every credential-carrying type is
redacted (covered by a leak regression test).
Behavior is unchanged: static token, namespace, and per-attempt timeout
feed the same VaultClientSettings as before, and AppRole configurations
are still rejected at construction with the same message.
* fix(kms): restore vault backend test compilation after timeout parameter
PR #5472 added an attempt_timeout parameter to VaultKmsClient::new while
PR #5474 landed tests still using the one-argument form, leaving
'cargo test -p rustfs-kms' unable to compile on main. Pass the same
30-second timeout the surrounding integration tests already use.
* feat(kms): add master key version to data key envelope contract
DataKeyEnvelope gains an optional master_key_version field recording
which KEK version wrapped the DEK, so rotation-aware backends can load
the matching historical material on decrypt. The field is skipped when
None, keeping envelopes from non-rotating backends byte-identical to
the historical seven-field JSON shape, and legacy envelopes without the
field deserialize to None. The envelope discriminator marker is
untouched, so mixed-format routing is unchanged in both directions.
Adds the KeyVersionNotFound typed error for version-addressed material
lookups that must fail closed instead of falling back to the current
version.
Refs rustfs/backlog#1565
唐小鸭