Merge branch 'arm64'

Add support for the arm64 platform and update the documentation
to reflect arm64-specific installation and configuration steps.

Signed-off-by: GL.iNet-Yongping.Xie <yongping.xie@gl-inet.com>

Dockerfile

@@ -1,4 +1,7 @@
 FROM alpine:latest
 WORKDIR /home
-COPY ./rttys /usr/bin/rttys
+
+ARG TARGETARCH
+COPY ./dist/rttys-linux-${TARGETARCH} /usr/bin/rttys
+
 ENTRYPOINT ["/usr/bin/rttys"]

Makefile

@@ -1,29 +1,54 @@
 # Makefile
-
-# Go binary name
-BINARY_NAME = rttys
+# ---------------- Project ----------------
+BINARY_NAME ?= rttys
+UI_DIR      ?= ui
+CONF_FILE   ?= ./rttys.conf
 
 # Go build flags
-BUILD_FLAGS := -ldflags "-s -w"
+BUILD_FLAGS ?= -ldflags "-s -w"
 
-# Go build command
+# Output dir for cross builds
+DIST_DIR    ?= dist
+
+# Image name
+IMAGE_NAME  ?= glkvm-cloud
+IMAGE_TAG   ?= build
+
+UNAME_S := $(shell uname -s)
+UNAME_M := $(shell uname -m)
+
+GOOS   ?= $(shell go env GOOS)
+GOARCH ?= $(shell go env GOARCH)
+
+# Map uname -m -> goarch
+ifeq ($(UNAME_M),x86_64)
+  HOST_GOARCH := amd64
+else ifeq ($(UNAME_M),aarch64)
+  HOST_GOARCH := arm64
+else ifeq ($(UNAME_M),arm64)
+  HOST_GOARCH := arm64
+else
+  HOST_GOARCH := $(GOARCH)
+endif
+
+# ---------------- Commands ----------------
 GO_BUILD_CMD = go build $(BUILD_FLAGS) -o $(BINARY_NAME)
 
-# Paths
-UI_DIR = ui
-CONF_FILE = ./rttys.conf
+.PHONY: all ui build run build-all build-run full-run \
+        build-linux-amd64 build-linux-arm64 build-linux-all \
+        docker-build docker-fullbuild docker-buildx docker-buildx-full
 
-.PHONY: all ui build run build-run full-run
+all: build
 
 # Build frontend files only
 ui:
 	cd $(UI_DIR) && npm install && npm run build
 
-# Build Go binary only
+# Build for current env (native)
 build:
-	CGO_ENABLED=0 $(GO_BUILD_CMD)
+	CGO_ENABLED=0 GOOS=$(GOOS) GOARCH=$(GOARCH) $(GO_BUILD_CMD)
 
-# Run Go program only
+# Run Go program only (native binary)
 run:
 	./$(BINARY_NAME) -c $(CONF_FILE)
 
@@ -36,10 +61,52 @@ build-run: build run
 # Build frontend, build Go binary, and run
 full-run: ui build run
 
-# Build Docker image without updating ui
-docker-build: build
-	docker build -t glkvm-cloud:build .
+# ---------------- Cross compile (Linux) ----------------
+# Produce: dist/rttys-linux-amd64 , dist/rttys-linux-arm64
+build-linux-amd64:
+	@mkdir -p $(DIST_DIR)
+	CGO_ENABLED=0 GOOS=linux GOARCH=amd64 \
+		go build $(BUILD_FLAGS) -o $(DIST_DIR)/$(BINARY_NAME)-linux-amd64
 
-# Full Build Docker image
+build-linux-arm64:
+	@mkdir -p $(DIST_DIR)
+	CGO_ENABLED=0 GOOS=linux GOARCH=arm64 \
+		go build $(BUILD_FLAGS) -o $(DIST_DIR)/$(BINARY_NAME)-linux-arm64
+
+build-linux-all: build-linux-amd64 build-linux-arm64
+
+# ---------------- Docker (single-arch) ----------------
+# Build Docker image using current host arch
+docker-build: build
+	docker build -t $(IMAGE_NAME):$(IMAGE_TAG) .
+
+# Full build Docker image
 docker-fullbuild: ui build
-	docker build -t glkvm-cloud:build .
+	docker build -t $(IMAGE_NAME):$(IMAGE_TAG) .
+
+# ---------------- Docker Buildx ----------------
+# Multi-arch build
+# Usage:
+#   make docker-buildx GOARCH=amd64 IMAGE_TAG=build-amd64
+#   make docker-buildx GOARCH=arm64 IMAGE_TAG=build-arm64
+PLATFORMS ?= linux/amd64,linux/arm64
+REGISTRY  ?=
+
+# If REGISTRY is set, tag becomes: REGISTRY/IMAGE_NAME:IMAGE_TAG
+ifdef REGISTRY
+  IMAGE_REF := $(REGISTRY)/$(IMAGE_NAME):$(IMAGE_TAG)
+else
+  IMAGE_REF := $(IMAGE_NAME):$(IMAGE_TAG)
+endif
+
+docker-buildx:
+	@docker buildx version >/dev/null 2>&1 || (echo "docker buildx not available" && exit 1)
+	@echo "==> buildx (load local image): $(IMAGE_REF) [linux/$(GOARCH)]"
+	docker buildx build \
+		--platform linux/$(GOARCH) \
+		-t $(IMAGE_REF) \
+		--load .
+
+
+docker-buildx-full: ui
+	@$(MAKE) docker-buildx

README.md

@@ -17,6 +17,9 @@ Self-Deployed Lightweight Cloud is a lightweight KVM remote cloud platform tailo
 -  **Lightweight Design** - Optimized for small businesses and individual users
 -  **Enterprise Authentication** -  Supports both **LDAP** and **OIDC** login methods for enterprise users. 
 
+-  **Deployment** - Supports both **internal network** and **public internet** deployments
+-  **Platform Compatibility** - Supports both **x86_64** and **arm64** platforms
+
 ## Self-Hosting Guide
 
 The following mainstream operating systems have been tested and verified
@@ -61,9 +64,10 @@ If your server provider uses a **cloud security group** (e.g., AWS, Aliyun, etc.
 
 We provide **two** ways to install GLKVM Cloud: 
 
-#### A) One-line installer (recommended)
+#### A) One-line installer (recommended, x86_64/amd64)
 
 > **Note:** The one-line installer is **Docker-based**. It automates Docker/Compose setup, pulls images, renders configs from templates, and starts services for you.
+> **Platform:** currently supports **x86_64 (amd64)** only.
 
 Run **as root**:
 
@@ -74,6 +78,8 @@ Run **as root**:
 #### B) Docker manual install
 
 > Full reference: see [`docker-compose/README.md`](https://github.com/gl-inet/glkvm-cloud/blob/main/docker-compose/README.md)
+>
+> **Platform:** supports both **x86_64 (amd64)** and **arm64 (AArch64)**. 
 
 ### 🌐 Platform Access
 

README.zh-CN.md

@@ -18,6 +18,9 @@
 *  **轻量设计** - 专为小型企业和个人优化
 *  **企业级认证** -  同时支持 **LDAP** 和 **OIDC** 登录方式，适用于企业用户。 
 
+-  **部署方式** - 同时支持 **内网部署** 和 **公网部署**
+-  **平台兼容性** - 同时支持 **x86_64** 和 **arm64** 平台
+
 ## 自部署指南
 
 以下主流操作系统已通过测试验证：
@@ -61,9 +64,10 @@
 
 我们提供 **两种** 安装 GLKVM Cloud 的方式：
 
-#### A) 一键安装脚本（推荐）
+#### A) 一键安装脚本（推荐，仅支持 x86_64 / amd64）
 
 > **注意：** 一键安装脚本基于 **Docker**。它会自动完成 Docker / Docker Compose 的安装、拉取镜像、根据模板渲染配置文件，并启动所有服务。
+> **平台支持：** 当前仅支持 **x86_64（amd64）** 平台。
 
 使用 **root 权限** 运行以下命令安装 GLKVM 轻量云：
 
@@ -74,6 +78,7 @@
 #### B) 使用 Docker 手动安装
 
 > 完整参考文档请查看：[`docker-compose/README-CN.md`](https://github.com/gl-inet/glkvm-cloud/blob/main/docker-compose/README-CN.md)
+> 平台支持： 同时支持 x86_64（amd64） 与 arm64（AArch64） 平台。
 
 
 ### 🌐 平台访问

docker-compose/.env.arm64.example

@@ -0,0 +1,83 @@
+# Images
+GLKVM_IMAGE=glzhitong/glkvm-cloud:latest-arm64
+COTURN_IMAGE=coturn/coturn:edge-alpine-arm64v8
+
+# Enable reverse proxy mode (e.g. Nginx in front of GLKVM Cloud).
+# When enabled, TLS is handled by the proxy and GLKVM Cloud runs in plain HTTP.
+#
+# Note:
+# In reverse-proxy mode, remote device access depends on the correct forwarded headers
+# from the front-end proxy. If these headers are missing or incorrect, GLKVM Cloud may
+# generate redirect URLs with the internal port (e.g. :10443).
+#
+# Please make sure your Nginx config includes:
+#   proxy_set_header Host                $host;
+#   proxy_set_header X-Forwarded-Host    $host;
+#   proxy_set_header X-Forwarded-Proto   $scheme;
+#   proxy_set_header X-Forwarded-Port    $server_port;
+#   proxy_set_header X-Real-IP           $remote_addr;
+#   proxy_set_header X-Forwarded-For     $proxy_add_x_forwarded_for;
+#
+# Reference (verified working example):
+# https://github.com/gl-inet/glkvm-cloud/blob/main/docker-compose/nginx-reverse-proxy-example.conf
+REVERSE_PROXY_ENABLED=false
+
+# GLKVM access IP seen by devices/users.
+# Leave empty to auto-detect at container start.
+GLKVM_ACCESS_IP=
+
+# rttys
+RTTYS_TOKEN=DeviceTokenYouCanChangeMe
+RTTYS_PASS=StrongP@ssw0rd
+RTTYS_DEVICE_PORT=5912
+RTTYS_WEBUI_PORT=443
+RTTYS_HTTP_PROXY_PORT=10443
+
+# TURN
+TURN_PORT=3478
+TURN_USER=glkvmcloudwebrtcuser
+TURN_PASS=AnotherS3cret
+
+# LDAP Authentication (Optional)
+LDAP_ENABLED=false
+LDAP_SERVER=your-ldap-server.com
+LDAP_PORT=389
+LDAP_USE_TLS=false
+LDAP_BIND_DN=cn=service-account,ou=users,dc=company,dc=com
+LDAP_BIND_PASSWORD=service-password
+LDAP_BASE_DN=ou=users,dc=company,dc=com
+
+# User filter examples for different LDAP implementations:
+# Active Directory: (&(objectClass=person)(sAMAccountName=%s))
+# OpenLDAP: (&(objectClass=inetOrgPerson)(uid=%s))
+# FreeIPA: (&(objectClass=person)(uid=%s))
+# Generic LDAP: (uid=%s)
+LDAP_USER_FILTER=(uid=%s)
+
+LDAP_ALLOWED_GROUPS=admins,operators
+LDAP_ALLOWED_USERS=user1,user2
+
+# OIDC Authentication (Optional, generic OIDC provider)
+OIDC_ENABLED=false
+OIDC_ISSUER=
+OIDC_CLIENT_ID=
+OIDC_CLIENT_SECRET=
+OIDC_AUTH_URL=
+OIDC_TOKEN_URL=
+
+# Redirect URL registered in your OIDC provider.
+# The path part (/auth/oidc/callback) is fixed by GLKVM Cloud and must not be changed.
+# Example:
+#   OIDC_REDIRECT_URL=https://your-domain.example.com/auth/oidc/callback
+OIDC_REDIRECT_URL=
+
+OIDC_SCOPES="openid profile email"
+
+# Email-based whitelist (exact email or domain like @example.com)
+OIDC_ALLOWED_USERS=
+# Subject (sub) whitelist (stable user IDs)
+OIDC_ALLOWED_SUBS=
+# Username whitelist (preferred_username or name)
+OIDC_ALLOWED_USERNAMES=
+# Groups whitelist (e.g. admin, devops)
+OIDC_ALLOWED_GROUPS=

docker-compose/README-CN.md

@@ -7,9 +7,19 @@
 ```bash
 git clone https://github.com/gl-inet/glkvm-cloud.git
 cd glkvm-cloud/docker-compose/
-cp .env.example .env
 ```
 
+* **x86_64（amd64）平台**：
+  ```bash
+  cp .env.example .env
+  ```
+* **arm64（AArch64）平台**：
+  
+  ```bash
+  cp .env.arm64.example .env
+  ```
+
+
 ### 2. **配置环境变量**
 
 编辑 `.env` 文件，并根据需求更新关键参数：

docker-compose/README.md

@@ -7,8 +7,16 @@
    ```bash
    git clone https://github.com/gl-inet/glkvm-cloud.git
    cd glkvm-cloud/docker-compose/
-   cp .env.example .env
    ```
+* For **x86_64 (amd64)**:
+
+  ```bash
+  cp .env.example .env
+  ```
+* For **arm64 (AArch64)**:
+  ```bash
+  cp .env.arm64.example .env
+  ```
 
 2. **Configure environment variables**
 

docker-compose/docker-compose.yml

@@ -5,6 +5,7 @@ services:
     image: ${GLKVM_IMAGE:-glzhitong/glkvm-cloud:latest}
     container_name: glkvm_cloud
     restart: always
+    network_mode: "host"
     environment:
       # Preferred: set GLKVM_ACCESS_IP explicitly; if empty, entrypoint will auto-detect once.
       GLKVM_ACCESS_IP: ${GLKVM_ACCESS_IP:-}
@@ -60,15 +61,12 @@ services:
       - ./database:/home/database:rw
     entrypoint: ["/bin/sh", "/docker-entrypoint.sh"]
     command: ["rttys"]
-    ports:
-      - "${RTTYS_WEBUI_PORT:-443}:${RTTYS_WEBUI_PORT:-443}"
-      - "${RTTYS_HTTP_PROXY_PORT:-10443}:${RTTYS_HTTP_PROXY_PORT:-10443}"
-      - "${RTTYS_DEVICE_PORT:-5912}:${RTTYS_DEVICE_PORT:-5912}"
 
   coturn:
     image: ${COTURN_IMAGE:-coturn/coturn:edge-alpine}
     container_name: glkvm_coturn
     restart: always
+    network_mode: "host"
     environment:
       # Same semantics as above: prefer explicit value, else auto-detect
       GLKVM_ACCESS_IP: ${GLKVM_ACCESS_IP:-}
@@ -79,7 +77,4 @@ services:
     command: ["coturn"]
     volumes:
       - ./templates/turnserver.conf.template:/tpl/turnserver.conf.tmpl:ro
-      - ./scripts/docker-entrypoint.sh:/docker-entrypoint.sh:ro
-    ports:
-      - "${TURN_PORT:-3478}:3478/tcp"
-      - "${TURN_PORT:-3478}:3478/udp"
+      - ./scripts/docker-entrypoint.sh:/docker-entrypoint.sh:ro