Previously, upsertRecord matched only by type and name, silently
overwriting any existing record of the same type/name with different
content. This caused data loss when users had multiple records of the
same type (e.g. multiple TXT records for SPF + site verification).
Now upsertRecord also checks the record content/target before deciding
to update. If the content differs, a new record is created alongside
the existing one instead of replacing it.
Affected providers: Cloudflare, Porkbun, Infomaniak, OVH.
Tests updated accordingly.
#5257 merged, so canary now carries the Infomaniak provider and its
0191_cool_christian_walker. This branch's 0191_elite_ultragirl collided on the
number, and the conflicts were the usual "infomaniak and ovh added at the same
spot" across the enum, the config union, the client registry, SENSITIVE_FIELDS,
both providerLabels maps, the icons and the provider form — all resolved by
keeping both.
Regenerated as 0192_light_lake with a current timestamp rather than renaming the
file, so drizzle still applies it on a database that has already run canary's
0191.
restoreRecord had the restore POST and its zone refresh inside one catch. That
was harmless while refreshZone swallowed failures, but the previous commit made
it throw, which brought a new case into that catch: the restore succeeds and
only the publication fails.
The message then told the user the record "has been deleted" and to recreate it
by hand. It exists at OVH, just unpublished, so following that advice duplicates
it as soon as the zone is refreshed.
The two failures are now reported separately. A failed POST still means the
record is really gone and prints what to recreate. A failed refresh after a
successful restore says the record is back but not served yet, and explicitly
says not to recreate it. Either way the original replacement error is kept, so
the user still learns why the type change failed.
Reported by Greptile on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
refreshZone runs after the record write has already succeeded, so a failure
there means the change exists at the provider but is not being served yet. It
was left unguarded at all six call sites, so the caller saw a bare transport
error and would reasonably read it as "nothing was applied" — while a type
change had already deleted the old record and created its replacement.
Rolling the write back would destroy correct state over a publish failure, and
re-deleting after an uncertain network error is how records get lost. The error
now says what actually happened and how it resolves: the next successful change
to the zone publishes it, or the user can refresh the zone from the OVH manager.
Guarding the helper covers upsertRecord and deleteRecord too, not just the type
change Greptile pointed at.
Reported by Greptile on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
canary landed its own 0190 (0190_nappy_anita_blake), which collides with this
branch's 0190_even_mastermind. Renaming would not have been enough: drizzle
applies migrations by comparing timestamps against the last applied one, so this
branch's older `when` would have been silently skipped on any deployment that
had already run canary's 0190, leaving the enum without its new value.
Regenerated as 0191_elite_ultragirl with a current timestamp.
canary landed its own 0190 (0190_nappy_anita_blake), which collides with this
branch's 0190_perpetual_red_skull. Renaming would not have been enough: drizzle
applies migrations by comparing timestamps against the last applied one, so this
branch's older `when` would have been silently skipped on any deployment that
had already run canary's 0190, leaving the enum without its new value.
Regenerated as 0191_cool_christian_walker with a current timestamp.
OVH matches access rules per exact path: a `GET /domain/zone/*` rule grants the
subtree but not the bare `GET /domain/zone` that listZones and testConnection
call. Verified against a live account with a consumer key carrying that single
wildcard rule:
GET /domain/zone -> 403 This call has not been granted
GET /domain/zone/ -> 200
GET /domain/zone/{zone}/record -> 200
The form only asked for rights on `/domain/zone/*`, so a token created by
following it could not list zones at all, and the failure surfaced as a bare
"This call has not been granted" that points nowhere.
The hint now lists the five rights verbatim, and a token missing the root one
gets an error that names it instead of echoing OVH's message.
Reported by @narcisonunez on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
listZones used /1/product, which lego uses but the API docs don't: it is the
legacy singular route, it returns no pagination metadata, and it 401s for at
least some tokens. The documented /1/products returns `total`, `pages`,
`items_per_page` and `page`, and defaults to 15 domains per page, so an account
with more domains than that would silently lose zones.
Switch to the plural endpoint and walk every page. Verified against a live
account: forcing per_page=2 collects all 5 domains across 3 pages with no
duplicates.
Also inline the single-use createdId helper.
Both reported by @narcisonunez on #5257.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Changing a record's type deletes the record then recreates it with the new type,
because OVH's update payload carries no fieldType. If the creation failed the
name was left with nothing and no rollback.
The delete still has to come first, since OVH rejects a CNAME that would sit
alongside other data on the same name. So on a failed creation the original
record is put back from the copy already fetched before the delete, and the
original error is rethrown. If the restore fails too, the error names the record
that has to be recreated by hand.
Reported by Greptile on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
toSource always writes the apex as ".", but listRecords already accepted "" and
"@" as apex spellings on read. The upsert lookup compared sources strictly, so a
record stored under one of the other spellings would not have matched and the
upsert would have created a duplicate apex record instead of updating it.
Normalize the candidate's source before comparing, so read and match agree.
Reported by Greptile on #5257.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Verified against a live Infomaniak account: the API returns `source: "."` for
apex records, not "" as assumed.
Reading them back produced a doubled dot ("..example.com"), and writing "" meant
an apex upsert never matched the existing record, so it would have created a
duplicate apex record instead of updating it.
toSource now emits "." for the apex and toFqdn accepts ".", "" and "@" so a
hand-written record still round-trips.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds OVHcloud alongside Cloudflare, AWS Route53 and Porkbun, following the
existing DnsClient interface in packages/server/src/utils/dns/.
- ovh.ts implements listZones, listRecords, upsertRecord, updateRecord,
deleteRecord and testConnection against the /domain/zone endpoints of the
OVHcloud API, on any of its seven regional endpoints (ovh-eu/ca/us, kimsufi
and soyoustart).
- A new `ovh` value was added to the DnsProviderType enum along with an
ovhDnsConfigSchema (endpoint, applicationKey, applicationSecret, consumerKey)
in the discriminated union, plus the Drizzle migration for the enum change.
- The application secret and the consumer key are masked/merged like the other
providers' secrets in services/dns-provider.ts.
- UI: OVHcloud icon, an endpoint selector and the three credential fields in the
DNS provider dialog, plus registration in the provider selector.
Three OVH-specific behaviours are handled explicitly:
- Requests are signed with `$1$` + sha1(applicationSecret+consumerKey+method+
url+body+timestamp). The timestamp comes from the API's own clock via an
unauthenticated GET /auth/time, since a host clock a few seconds off would get
every call rejected; the measured drift is cached per endpoint for an hour.
- OVH only applies zone changes once the zone is explicitly refreshed, so every
successful create, update and delete is followed by POST /domain/zone/{zone}
/refresh.
- The record update payload carries no fieldType, so changing a record's type
replaces the record (DELETE then POST) and returns the new id.
The record listing endpoint returns ids only, so each record is fetched
individually with the fan-out capped at 8 concurrent requests.
Also fills in the missing Porkbun label in show-dns-providers.tsx, which fell
back to displaying the raw enum value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds Infomaniak alongside Cloudflare, AWS Route53 and Porkbun, following the
existing DnsClient interface in packages/server/src/utils/dns/.
- infomaniak.ts implements listZones, listRecords, upsertRecord, updateRecord,
deleteRecord and testConnection against the Infomaniak API. Zones come from
/1/product?service_name=domain and records from the v2 /2/zones/{zone}/records
endpoints, which are keyed by zone name rather than by product id.
- A new `infomaniak` value was added to the DnsProviderType enum along with an
infomaniakDnsConfigSchema (apiToken) in the discriminated union, plus the
Drizzle migration for the enum change.
- The token is masked/merged like the other providers in services/dns-provider.ts.
- UI: Infomaniak icon and API Token field in the DNS provider dialog, plus
registration in the provider selector.
Infomaniak's `source` is relative to the zone (empty for the apex), so record
names are translated between Dokploy's fully-qualified format and Infomaniak's
subdomain-only format internally, with the trailing dot handled. TXT targets are
stored quoted by the API and are unquoted on read / quoted on write so that
editing a record does not stack quotes on every save.
Also fills in the missing Porkbun label in show-dns-providers.tsx, which fell
back to displaying the raw enum value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Embedding the full YAML (base64-encoded) into a single SSH exec command
silently fails once the payload passes the SSH transport's packet size
ceiling (~90-100KB), truncating the dynamic config with no error
surfaced anywhere. Switch to SFTP, which has no such limit.
--project-directory was added unconditionally in 87b914996 to fix
relative bind mount resolution for git-based compose deploys with a
nested composePath (#5181). It also moves where build.context and the
generated .env resolve, breaking any compose file in a subdirectory
that has context: . alongside its Dockerfile (#5230), or interpolates
env vars (#5242).
Only pin --project-directory when the compose actually has mounts
configured; otherwise build.context and .env resolve against the
compose file's own directory like plain docker compose. Also pass
--env-file explicitly pointing at the generated .env next to the
compose file, so it's found even when --project-directory is pinned
(credit: tonnenpinguin, PR #5235).
Fixes#5230Fixes#5242
Attaching Basic Auth or a Redirect to an application with no domains
wrote an empty routers/services block to the app's dynamic config
file. Traefik's file provider rejects that as invalid and aborts its
watcher, blocking config updates for every other application.
Fixes#5189
Compose deployments using a git provider (GitHub/GitLab/Gitea/Bitbucket/
custom Git) clone the repo verbatim, so composePath can point into a
subdirectory (e.g. deploy/docker-compose.yml). Docker Compose resolves
relative bind mounts (../files) against the compose file's own directory,
not against the code/ dir where file mounts are actually written, so the
mount silently binds an empty directory instead of the configured content.
Pin --project-directory to code/ when building the docker compose command
so relative mounts always resolve the same way raw deployments already do.
Fixes#5181
Escaping in prepareEnvironmentVariablesForFile escaped every $,
including inside a deliberate ${VAR} reference, breaking Compose's
documented .env variable interpolation. Only escape $ that isn't
part of a ${IDENTIFIER} sequence.
Fixes#5151
Adds Porkbun as a supported DNS provider alongside Cloudflare and
AWS Route53, allowing Dokploy to automatically create DNS records
for domains managed on Porkbun.
- New DnsClient implementation for the Porkbun API v3
- porkbun enum value and config schema (apiKey/secretApiKey)
- Drizzle migration for the new DnsProviderType enum value
- UI: provider icon, form fields and provider selector entry
- Unit tests covering listZones/listRecords/upsertRecord/updateRecord/deleteRecord/testConnection
Route53 returns a record set as a list of values, but listing joined them
into one string and writing sent that string back as a single
ResourceRecord. Editing a multi-value NS, MX or TXT set therefore either
failed validation or collapsed the set into one bogus value, and creating
a record for a name that already had values replaced them silently.
Values are now newline separated end to end: listing joins with a
newline, writing splits back into one ResourceRecord per line, and
creating merges into the existing set instead of replacing it. Unquoted
TXT values get the quotes Route53 requires. The record panel shows a
textarea for Route53 and validates every line.
Cloudflare treats content as read-only for SRV and CAA and expects a
data object instead, so both types were rejected on write. The client
now parses the inline value into the fields Cloudflare wants, and
builds the payload before the lookup request so a malformed value
fails without spending an API call.
The form rejects a malformed SRV or CAA value up front and shows the
expected shape, so the error lands on the field instead of coming
back from the provider.
Providers, domains and records now each have their own page instead of
a stack of modals. A provider opens its domains as cards, with the
record count loading separately so the domains appear right away. A
domain opens its records as a table with search, type filter and
pagination. Creating or editing a record happens in a panel that
slides in next to the table.
The type list was capped at A and CNAME in the zod schema, so widening
the dropdown alone would not have worked. AAAA, MX, TXT, NS, SRV, CAA
and PTR work now. MX carries a priority that Cloudflare takes as a
separate field and Route53 takes inline in the value, so the
Cloudflare client splits it out on write and puts it back on read.
The form keeps one value field for both providers.
Cloudflare proxy status is now editable and visible. A, AAAA and CNAME
records get a Proxied / DNS only toggle in the form and a cloud icon
in the table. The proxy field only goes to the API when the caller
sets it, so an update from another path cannot silently disable the
proxy.
Tests cover the MX priority round trip and the proxy rules in the
Cloudflare client.
docker stack deploy reads env_file literally without stripping
quotes (unlike docker compose), so the quoting/escaping added to
fix#4694 was shipping literal quote characters into stack
containers.
Fixes#5096, #5110.
Some self-hosted GitLab instances (e.g. older versions without
expires_in configured in doorkeeper) omit expires_in from the
OAuth token response. Computing Date.now()/1000 + undefined
produced NaN, which Postgres rejected on the expires_at integer
column, crashing both the initial OAuth callback and the token
refresh flow with a 500.
Falls back to null when expires_in is absent, matching the
existing Gitea callback behavior.
Closes#4362
Yash Kumar