gsadmin/PSOPNSenseAPI

Fork 0

mirror of https://github.com/freedbygrace/PSOPNSenseAPI.git synced 2026-07-26 11:58:18 +00:00

Files

T

GraceSolutions afcb6dbbfa Add port forwarding support, improve XML documentation, and add unit tests

2025-04-14 22:48:53 -04:00

33 KiB

Raw Permalink Blame History

API Reference

This document provides a comprehensive reference for all cmdlets in the PSOPNSenseAPI module.

Connection Management
Firewall Management
NAT Management
Interface Management
VLAN Management
Gateway Management
Route Management
DNS Management
DHCP Management
Alias Management
User Management
Plugin Management
Firmware Management
System Management
Network Utilities
Tailscale Integration
Cron Job Management

Connection Management

Connect-OPNSense

Establishes a connection to an OPNSense firewall.

Syntax

Connect-OPNSense
    -Server <String>
    -ApiKey <String>
    -ApiSecret <String>
    [-SkipCertificateCheck]

Parameters

Server - The URL of the OPNSense firewall.
ApiKey - The API key for authentication.
ApiSecret - The API secret for authentication.
SkipCertificateCheck - Skips certificate validation for HTTPS connections.

Examples

# Connect to an OPNSense firewall
Connect-OPNSense -Server "https://firewall.example.com" -ApiKey "your_api_key" -ApiSecret "your_api_secret"

# Connect to an OPNSense firewall with certificate validation disabled
Connect-OPNSense -Server "https://firewall.example.com" -ApiKey "your_api_key" -ApiSecret "your_api_secret" -SkipCertificateCheck

Disconnect-OPNSense

Terminates the connection to an OPNSense firewall.

Syntax

Disconnect-OPNSense

Examples

# Disconnect from an OPNSense firewall
Disconnect-OPNSense

Firewall Management

Get-OPNSenseFirewallRule

Retrieves firewall rules from an OPNSense firewall.

Syntax

Get-OPNSenseFirewallRule
    [-Uuid <String>]
    [-Interface <String>]
    [-Direction <String>]
    [-Protocol <String>]
    [-Action <String>]

Parameters

Uuid - The UUID of a specific firewall rule to retrieve.
Interface - Filter rules by interface.
Direction - Filter rules by direction (in, out).
Protocol - Filter rules by protocol.
Action - Filter rules by action (pass, block, reject).

Examples

# Get all firewall rules
Get-OPNSenseFirewallRule

# Get a specific firewall rule by UUID
Get-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

# Get all rules for a specific interface
Get-OPNSenseFirewallRule -Interface "lan"

New-OPNSenseFirewallRule

Creates a new firewall rule on an OPNSense firewall.

Syntax

New-OPNSenseFirewallRule
    -Interface <String>
    [-Direction <String>]
    [-Protocol <String>]
    [-Source <String>]
    [-SourcePort <String>]
    [-Destination <String>]
    [-DestinationPort <String>]
    [-Action <String>]
    [-Description <String>]
    [-Enabled <Boolean>]
    [-Log <Boolean>]
    [-Force]

Parameters

Interface - The interface for the rule.
Direction - The direction for the rule (in, out). Default is "in".
Protocol - The protocol for the rule (tcp, udp, icmp, etc.).
Source - The source address for the rule. Default is "any".
SourcePort - The source port for the rule. Default is "any".
Destination - The destination address for the rule. Default is "any".
DestinationPort - The destination port for the rule.
Action - The action to take (pass, block, reject). Default is "pass".
Description - A description for the rule.
Enabled - Whether the rule is enabled. Default is true.
Log - Whether to log matches for this rule. Default is false.
Force - Suppresses the confirmation prompt.

Examples

# Create a rule to allow HTTP traffic
New-OPNSenseFirewallRule -Interface "lan" -Protocol "tcp" -Destination "any" -DestinationPort "80" -Description "Allow HTTP"

# Create a rule to block outgoing SMTP traffic
New-OPNSenseFirewallRule -Interface "lan" -Direction "out" -Protocol "tcp" -DestinationPort "25" -Action "block" -Description "Block outgoing SMTP" -Log

Set-OPNSenseFirewallRule

Updates an existing firewall rule on an OPNSense firewall.

Syntax

Set-OPNSenseFirewallRule
    -Uuid <String>
    [-Interface <String>]
    [-Direction <String>]
    [-Protocol <String>]
    [-Source <String>]
    [-SourcePort <String>]
    [-Destination <String>]
    [-DestinationPort <String>]
    [-Action <String>]
    [-Description <String>]
    [-Enabled <Boolean>]
    [-Log <Boolean>]
    [-Force]
    [-PassThru]

Parameters

Uuid - The UUID of the firewall rule to update.
Interface - The interface for the rule.
Direction - The direction for the rule (in, out).
Protocol - The protocol for the rule.
Source - The source address for the rule.
SourcePort - The source port for the rule.
Destination - The destination address for the rule.
DestinationPort - The destination port for the rule.
Action - The action to take (pass, block, reject).
Description - A description for the rule.
Enabled - Whether the rule is enabled.
Log - Whether to log matches for this rule.
Force - Suppresses the confirmation prompt.
PassThru - Returns the updated rule.

Examples

# Update a firewall rule's description
Set-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6" -Description "Updated HTTP rule"

# Update a firewall rule's destination port
Set-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6" -DestinationPort "8080"

Remove-OPNSenseFirewallRule

Removes a firewall rule from an OPNSense firewall.

Syntax

Remove-OPNSenseFirewallRule
    -Uuid <String>
    [-Force]

Parameters

Uuid - The UUID of the firewall rule to remove.
Force - Suppresses the confirmation prompt.

Examples

# Remove a firewall rule
Remove-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

# Remove a firewall rule without confirmation
Remove-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6" -Force

Enable-OPNSenseFirewallRule

Enables a firewall rule on an OPNSense firewall.

Syntax

Enable-OPNSenseFirewallRule
    -Uuid <String>
    [-Force]
    [-PassThru]

Parameters

Uuid - The UUID of the firewall rule to enable.
Force - Suppresses the confirmation prompt.
PassThru - Returns the updated rule.

Examples

# Enable a firewall rule
Enable-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

Disable-OPNSenseFirewallRule

Disables a firewall rule on an OPNSense firewall.

Syntax

Disable-OPNSenseFirewallRule
    -Uuid <String>
    [-Force]
    [-PassThru]

Parameters

Uuid - The UUID of the firewall rule to disable.
Force - Suppresses the confirmation prompt.
PassThru - Returns the updated rule.

Examples

# Disable a firewall rule
Disable-OPNSenseFirewallRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

Apply-OPNSenseFirewallChanges

Applies pending firewall changes on an OPNSense firewall.

Syntax

Apply-OPNSenseFirewallChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply firewall changes
Apply-OPNSenseFirewallChanges

# Apply firewall changes without confirmation
Apply-OPNSenseFirewallChanges -Force

NAT Management

Get-OPNSenseNatRule

Retrieves NAT rules from an OPNSense firewall.

Syntax

Get-OPNSenseNatRule
    [-Uuid <String>]
    [-Type <String>]
    [-Interface <String>]
    [-Description <String>]

Parameters

Uuid - The UUID of a specific NAT rule to retrieve.
Type - Filter rules by type (port_forward, outbound, 1to1).
Interface - Filter rules by interface.
Description - Filter rules by description.

Examples

# Get all NAT rules
Get-OPNSenseNatRule

# Get a specific NAT rule by UUID
Get-OPNSenseNatRule -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

# Get all port forwarding rules
Get-OPNSenseNatRule -Type "port_forward"

New-OPNSensePortForwardRule

Creates a new port forwarding rule on an OPNSense firewall.

Syntax

New-OPNSensePortForwardRule
    -Interface <String>
    -Protocol <String>
    [-Source <String>]
    [-SourcePort <String>]
    [-Destination <String>]
    -DestinationPort <String>
    -TargetIP <String>
    -TargetPort <String>
    [-Description <String>]
    [-NatReflection <String>]
    [-FilterRuleAssociation <Boolean>]
    [-Enabled <Boolean>]
    [-Log <Boolean>]
    [-Force]

Parameters

Interface - The interface for the rule.
Protocol - The protocol for the rule (tcp, udp, tcp/udp).
Source - The source address for the rule. Default is "any".
SourcePort - The source port for the rule. Default is "any".
Destination - The destination address for the rule. Default is "wanip".
DestinationPort - The destination port for the rule.
TargetIP - The target IP address for the rule.
TargetPort - The target port for the rule.
Description - A description for the rule.
NatReflection - The NAT reflection mode (enable, disable, purenat). Default is "enable".
FilterRuleAssociation - Whether to create an associated filter rule. Default is true.
Enabled - Whether the rule is enabled. Default is true.
Log - Whether to log matches for this rule. Default is false.
Force - Suppresses the confirmation prompt.

Examples

# Create a basic port forwarding rule
New-OPNSensePortForwardRule -Interface "wan" -Protocol "tcp" -DestinationPort "80" -TargetIP "192.168.1.100" -TargetPort "80" -Description "Web Server"

# Create a port forwarding rule with custom source and destination
New-OPNSensePortForwardRule -Interface "wan" -Protocol "tcp" -Source "203.0.113.0/24" -DestinationPort "443" -TargetIP "192.168.1.100" -TargetPort "443" -Description "Secure Web Server"

Apply-OPNSenseNatChanges

Applies pending NAT changes on an OPNSense firewall.

Syntax

Apply-OPNSenseNatChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply NAT changes
Apply-OPNSenseNatChanges

# Apply NAT changes without confirmation
Apply-OPNSenseNatChanges -Force

Interface Management

Get-OPNSenseInterface

Retrieves interface configurations from an OPNSense firewall.

Syntax

Get-OPNSenseInterface
    [-Name <String>]
    [-Type <String>]
    [-Enabled <Boolean>]

Parameters

Name - The name of a specific interface to retrieve.
Type - Filter interfaces by type (e.g., physical, vlan, bridge).
Enabled - Filter interfaces by enabled status.

Examples

# Get all interfaces
Get-OPNSenseInterface

# Get a specific interface by name
Get-OPNSenseInterface -Name "lan"

# Get all VLAN interfaces
Get-OPNSenseInterface -Type "vlan"

Set-OPNSenseInterface

Updates an existing interface on an OPNSense firewall.

Syntax

Set-OPNSenseInterface
    -Name <String>
    [-Description <String>]
    [-IPv4Address <String>]
    [-IPv4Subnet <String>]
    [-IPv6Address <String>]
    [-IPv6Subnet <String>]
    [-Enabled <Boolean>]
    [-BlockPrivate <Boolean>]
    [-BlockBogons <Boolean>]
    [-Force]
    [-PassThru]

Parameters

Name - The name of the interface to update.
Description - A description for the interface.
IPv4Address - The IPv4 address for the interface.
IPv4Subnet - The IPv4 subnet mask for the interface.
IPv6Address - The IPv6 address for the interface.
IPv6Subnet - The IPv6 subnet mask for the interface.
Enabled - Whether the interface is enabled.
BlockPrivate - Whether to block private networks.
BlockBogons - Whether to block bogon networks.
Force - Suppresses the confirmation prompt.
PassThru - Returns the updated interface.

Examples

# Update an interface's description
Set-OPNSenseInterface -Name "lan" -Description "Updated LAN Interface"

# Update an interface's IPv4 address
Set-OPNSenseInterface -Name "opt1" -IPv4Address "192.168.2.254" -IPv4Subnet "24"

Apply-OPNSenseInterfaceChanges

Applies pending interface changes on an OPNSense firewall.

Syntax

Apply-OPNSenseInterfaceChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply interface changes
Apply-OPNSenseInterfaceChanges

# Apply interface changes without confirmation
Apply-OPNSenseInterfaceChanges -Force

VLAN Management

Get-OPNSenseVLAN

Retrieves VLAN configurations from an OPNSense firewall.

Syntax

Get-OPNSenseVLAN
    [-Uuid <String>]

Parameters

Uuid - The UUID of a specific VLAN to retrieve.

Examples

# Get all VLANs
Get-OPNSenseVLAN

# Get a specific VLAN by UUID
Get-OPNSenseVLAN -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

New-OPNSenseVLAN

Creates a new VLAN on an OPNSense firewall.

Syntax

New-OPNSenseVLAN
    -Interface <String>
    -Tag <Int32>
    [-Priority <Int32>]
    [-Description <String>]
    [-Force]

Parameters

Interface - The parent interface for the VLAN.
Tag - The VLAN tag (1-4094).
Priority - The VLAN priority (0-7).
Description - A description for the VLAN.
Force - Suppresses the confirmation prompt.

Examples

# Create a new VLAN
New-OPNSenseVLAN -Interface "em0" -Tag 10 -Description "Management VLAN"

# Create a new VLAN with priority
New-OPNSenseVLAN -Interface "em1" -Tag 20 -Priority 5 -Description "Voice VLAN"

New-OPNSenseSubnetVLANs

Creates VLANs for subnets by dividing a network into smaller subnets.

Syntax

New-OPNSenseSubnetVLANs
    -ParentInterface <String>
    -Network <String>
    -SubnetMaskBits <Int32>
    -StartingVlanId <Int32>
    [-VlanIdIncrement <Int32>]
    [-DescriptionPrefix <String>]
    [-EnableDHCP <Boolean>]
    [-DHCPRangeStart <String>]
    [-DHCPRangeEnd <String>]
    [-DHCPDomain <String>]
    [-DHCPDnsServers <String[]>]
    [-Force]

Parameters

ParentInterface - The parent interface for the VLANs.
Network - The network in CIDR notation to divide into subnets.
SubnetMaskBits - The subnet mask bits for the subnets.
StartingVlanId - The starting VLAN ID.
VlanIdIncrement - The increment for VLAN IDs. Default is 1.
DescriptionPrefix - The prefix for VLAN descriptions. Default is "VLAN-".
EnableDHCP - Whether to enable DHCP on the created VLANs. Default is false.
DHCPRangeStart - The starting IP address for the DHCP range.
DHCPRangeEnd - The ending IP address for the DHCP range.
DHCPDomain - The domain name for DHCP clients.
DHCPDnsServers - The DNS servers for DHCP clients.
Force - Suppresses the confirmation prompt.

Examples

# Create VLANs for subnets
New-OPNSenseSubnetVLANs -ParentInterface "em0" -Network "192.168.0.0/24" -SubnetMaskBits 27 -StartingVlanId 10

# Create VLANs for subnets with DHCP enabled
New-OPNSenseSubnetVLANs -ParentInterface "em0" -Network "10.0.0.0/16" -SubnetMaskBits 24 -StartingVlanId 100 -EnableDHCP -DHCPDomain "example.com" -DHCPDnsServers "8.8.8.8","8.8.4.4"

Gateway Management

Get-OPNSenseGateway

Retrieves gateway configurations from an OPNSense firewall.

Syntax

Get-OPNSenseGateway
    [-Name <String>]
    [-Interface <String>]
    [-Protocol <String>]

Parameters

Name - The name of a specific gateway to retrieve.
Interface - Filter gateways by interface.
Protocol - Filter gateways by protocol (IPv4, IPv6).

Examples

# Get all gateways
Get-OPNSenseGateway

# Get a specific gateway by name
Get-OPNSenseGateway -Name "WAN_GATEWAY"

# Get all gateways for a specific interface
Get-OPNSenseGateway -Interface "wan"

New-OPNSenseGateway

Creates a new gateway on an OPNSense firewall.

Syntax

New-OPNSenseGateway
    -Name <String>
    -Interface <String>
    -IPAddress <String>
    [-Description <String>]
    [-Enabled <Boolean>]
    [-Monitor <String>]
    [-MonitorDisable <Boolean>]
    [-Weight <Int32>]
    [-Protocol <String>]
    [-Force]

Parameters

Name - The name of the gateway.
Interface - The interface for the gateway.
IPAddress - The IP address of the gateway.
Description - A description for the gateway.
Enabled - Whether the gateway is enabled. Default is true.
Monitor - The IP address to monitor for gateway status.
MonitorDisable - Whether to disable monitoring for this gateway. Default is false.
Weight - The weight of the gateway for load balancing. Default is 1.
Protocol - The protocol for the gateway (IPv4, IPv6). Default is IPv4.
Force - Suppresses the confirmation prompt.

Examples

# Create a basic gateway
New-OPNSenseGateway -Name "WAN2_GATEWAY" -Interface "opt1" -IPAddress "203.0.113.1" -Description "Secondary WAN Gateway"

# Create a gateway with monitoring
New-OPNSenseGateway -Name "WAN3_GATEWAY" -Interface "opt2" -IPAddress "198.51.100.1" -Description "Tertiary WAN Gateway" -Monitor "198.51.100.254"

Apply-OPNSenseGatewayChanges

Applies pending gateway changes on an OPNSense firewall.

Syntax

Apply-OPNSenseGatewayChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply gateway changes
Apply-OPNSenseGatewayChanges

# Apply gateway changes without confirmation
Apply-OPNSenseGatewayChanges -Force

Route Management

Get-OPNSenseRoute

Retrieves static routes from an OPNSense firewall.

Syntax

Get-OPNSenseRoute
    [-Uuid <String>]
    [-Network <String>]
    [-Gateway <String>]
    [-Description <String>]

Parameters

Uuid - The UUID of a specific route to retrieve.
Network - Filter routes by network.
Gateway - Filter routes by gateway.
Description - Filter routes by description.

Examples

# Get all static routes
Get-OPNSenseRoute

# Get a specific route by UUID
Get-OPNSenseRoute -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

# Get routes for a specific network
Get-OPNSenseRoute -Network "192.168.100.0/24"

New-OPNSenseRoute

Creates a new static route on an OPNSense firewall.

Syntax

New-OPNSenseRoute
    -Network <String>
    -Gateway <String>
    [-Description <String>]
    [-Disabled <Boolean>]
    [-Force]

Parameters

Network - The network for the route in CIDR notation.
Gateway - The gateway for the route.
Description - A description for the route.
Disabled - Whether the route is disabled. Default is false.
Force - Suppresses the confirmation prompt.

Examples

# Create a basic static route
New-OPNSenseRoute -Network "192.168.100.0/24" -Gateway "WAN_GATEWAY" -Description "Remote Office Network"

# Create a disabled static route
New-OPNSenseRoute -Network "10.0.0.0/8" -Gateway "WAN2_GATEWAY" -Description "Corporate Network" -Disabled

Apply-OPNSenseRouteChanges

Applies pending route changes on an OPNSense firewall.

Syntax

Apply-OPNSenseRouteChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply route changes
Apply-OPNSenseRouteChanges

# Apply route changes without confirmation
Apply-OPNSenseRouteChanges -Force

DNS Management

Get-OPNSenseDNSServer

Retrieves DNS server configurations from an OPNSense firewall.

Syntax

Get-OPNSenseDNSServer

Examples

# Get DNS server configuration
Get-OPNSenseDNSServer

Set-OPNSenseDNSServer

Updates the DNS server configuration on an OPNSense firewall.

Syntax

Set-OPNSenseDNSServer
    [-Enabled <Boolean>]
    [-ListenIPs <String[]>]
    [-Port <Int32>]
    [-DNSSECEnabled <Boolean>]
    [-ForwardingEnabled <Boolean>]
    [-ForwardingServers <String[]>]
    [-CacheEnabled <Boolean>]
    [-CacheSize <Int32>]
    [-PrefetchEnabled <Boolean>]
    [-PrefetchDomains <Boolean>]
    [-Force]
    [-PassThru]

Parameters

Enabled - Whether the DNS server is enabled.
ListenIPs - The IP addresses to listen on.
Port - The port to listen on. Default is 53.
DNSSECEnabled - Whether DNSSEC is enabled.
ForwardingEnabled - Whether DNS forwarding is enabled.
ForwardingServers - The DNS servers to forward queries to.
CacheEnabled - Whether DNS caching is enabled.
CacheSize - The size of the DNS cache in MB.
PrefetchEnabled - Whether DNS prefetching is enabled.
PrefetchDomains - Whether to prefetch domains.
Force - Suppresses the confirmation prompt.
PassThru - Returns the updated DNS server configuration.

Examples

# Enable the DNS server
Set-OPNSenseDNSServer -Enabled

# Configure DNS forwarding
Set-OPNSenseDNSServer -ForwardingEnabled -ForwardingServers "8.8.8.8","8.8.4.4"

Apply-OPNSenseDNSChanges

Applies pending DNS changes on an OPNSense firewall.

Syntax

Apply-OPNSenseDNSChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply DNS changes
Apply-OPNSenseDNSChanges

# Apply DNS changes without confirmation
Apply-OPNSenseDNSChanges -Force

DHCP Management

Get-OPNSenseDHCPServer

Retrieves DHCP server configurations from an OPNSense firewall.

Syntax

Get-OPNSenseDHCPServer
    [-Interface <String>]

Parameters

Interface - The interface to get the DHCP server configuration for.

Examples

# Get all DHCP servers
Get-OPNSenseDHCPServer

# Get the DHCP server for a specific interface
Get-OPNSenseDHCPServer -Interface "lan"

New-OPNSenseDHCPServer

Creates a new DHCP server on an OPNSense firewall.

Syntax

New-OPNSenseDHCPServer
    -Interface <String>
    -RangeFrom <String>
    -RangeTo <String>
    [-Domain <String>]
    [-DnsServers <String[]>]
    [-GatewayIP <String>]
    [-LeaseTime <Int32>]
    [-DenyUnknownClients <Boolean>]
    [-IgnoreClientIdentifiers <Boolean>]
    [-Enabled <Boolean>]
    [-Force]

Parameters

Interface - The interface to create the DHCP server on.
RangeFrom - The starting IP address of the DHCP range.
RangeTo - The ending IP address of the DHCP range.
Domain - The domain name to provide to DHCP clients.
DnsServers - The DNS servers to provide to DHCP clients.
GatewayIP - The gateway IP address to provide to DHCP clients.
LeaseTime - The lease time in seconds. Default is 86400 (1 day).
DenyUnknownClients - Whether to deny unknown clients. Default is false.
IgnoreClientIdentifiers - Whether to ignore client identifiers. Default is false.
Enabled - Whether the DHCP server is enabled. Default is true.
Force - Suppresses the confirmation prompt.

Examples

# Create a basic DHCP server
New-OPNSenseDHCPServer -Interface "lan" -RangeFrom "192.168.1.100" -RangeTo "192.168.1.200" -Domain "example.com" -DnsServers "192.168.1.1","8.8.8.8" -GatewayIP "192.168.1.1"

# Create a DHCP server with advanced options
New-OPNSenseDHCPServer -Interface "opt1" -RangeFrom "10.0.0.100" -RangeTo "10.0.0.200" -Domain "internal.example.com" -DnsServers "10.0.0.1","8.8.4.4" -GatewayIP "10.0.0.1" -LeaseTime 43200 -DenyUnknownClients

Get-OPNSenseDHCPLease

Retrieves DHCP leases from an OPNSense firewall.

Syntax

Get-OPNSenseDHCPLease
    [-Interface <String>]
    [-MACAddress <String>]
    [-IPAddress <String>]
    [-Hostname <String>]
    [-Status <String>]

Parameters

Interface - The interface to get DHCP leases for.
MACAddress - Filter leases by MAC address.
IPAddress - Filter leases by IP address.
Hostname - Filter leases by hostname.
Status - Filter leases by status (active, expired, etc.).

Examples

# Get all DHCP leases
Get-OPNSenseDHCPLease

# Get DHCP leases for a specific interface
Get-OPNSenseDHCPLease -Interface "lan"

# Get DHCP leases for a specific MAC address
Get-OPNSenseDHCPLease -MACAddress "00:11:22:33:44:55"

Apply-OPNSenseDHCPChanges

Applies pending DHCP changes on an OPNSense firewall.

Syntax

Apply-OPNSenseDHCPChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply DHCP changes
Apply-OPNSenseDHCPChanges

# Apply DHCP changes without confirmation
Apply-OPNSenseDHCPChanges -Force

Alias Management

Get-OPNSenseAlias

Retrieves aliases from an OPNSense firewall.

Syntax

Get-OPNSenseAlias
    [-Name <String>]
    [-Type <String>]

Parameters

Name - The name of a specific alias to retrieve.
Type - Filter aliases by type (host, network, port, url, urltable, geoip).

Examples

# Get all aliases
Get-OPNSenseAlias

# Get a specific alias by name
Get-OPNSenseAlias -Name "WebServers"

# Get all network aliases
Get-OPNSenseAlias -Type "network"

New-OPNSenseAlias

Creates a new alias on an OPNSense firewall.

Syntax

New-OPNSenseAlias
    -Name <String>
    -Type <String>
    -Content <String>
    [-Description <String>]
    [-Enabled <Boolean>]
    [-UpdateFrequency <Int32>]
    [-Force]

Parameters

Name - The name of the alias.
Type - The type of the alias (host, network, port, url, urltable, geoip).
Content - The content of the alias (comma-separated list of values).
Description - A description for the alias.
Enabled - Whether the alias is enabled. Default is true.
UpdateFrequency - The update frequency for URL and URL table aliases (in days).
Force - Suppresses the confirmation prompt.

Examples

# Create a host alias
New-OPNSenseAlias -Name "WebServers" -Type "host" -Content "192.168.1.10,192.168.1.11,192.168.1.12" -Description "Web Servers"

# Create a network alias
New-OPNSenseAlias -Name "InternalNetworks" -Type "network" -Content "192.168.1.0/24,192.168.2.0/24" -Description "Internal Networks"

# Create a URL table alias
New-OPNSenseAlias -Name "BlockList" -Type "urltable" -Content "https://www.example.com/blocklist.txt" -Description "Malicious IPs" -UpdateFrequency 1

Apply-OPNSenseAliasChanges

Applies pending alias changes on an OPNSense firewall.

Syntax

Apply-OPNSenseAliasChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply alias changes
Apply-OPNSenseAliasChanges

# Apply alias changes without confirmation
Apply-OPNSenseAliasChanges -Force

Network Utilities

Invoke-OPNSenseNetworkCalculation

Performs various network calculations on IP networks.

Syntax

Invoke-OPNSenseNetworkCalculation
    -Network <String>
    -Operation <String>
    [-PrefixLength <Int32>]
    [-SubnetCount <Int32>]
    [-IpAddress <String>]
    [-AdditionalNetworks <String[]>]

Parameters

Network - The network in CIDR notation to perform calculations on.
Operation - The operation to perform (Info, Subnet, SubnetByCount, Contains, Overlaps, Supernet, SupernetSummarize).
PrefixLength - The prefix length to use for subnetting.
SubnetCount - The number of subnets to create when using SubnetByCount.
IpAddress - The IP address to check when using Contains.
AdditionalNetworks - Additional networks to use with Overlaps, Supernet, or SupernetSummarize.

Examples

# Show network information
Invoke-OPNSenseNetworkCalculation -Network "192.168.1.0/24" -Operation Info

# Subnet a network into /27 networks
Invoke-OPNSenseNetworkCalculation -Network "10.0.0.0/24" -Operation Subnet -PrefixLength 27

# Check if an IP is within a network
Invoke-OPNSenseNetworkCalculation -Network "192.168.1.0/24" -Operation Contains -IpAddress "192.168.1.100"

ConvertTo-OPNSenseNetworkNotation

Converts between different network notation formats.

Syntax

ConvertTo-OPNSenseNetworkNotation
    [-CIDR <Int32>]
    [-SubnetMask <String>]

Parameters

CIDR - The CIDR prefix length to convert to a subnet mask.
SubnetMask - The subnet mask to convert to a CIDR prefix length.

Examples

# Convert CIDR to subnet mask
ConvertTo-OPNSenseNetworkNotation -CIDR 24  # Returns "255.255.255.0"

# Convert subnet mask to CIDR
ConvertTo-OPNSenseNetworkNotation -SubnetMask "255.255.255.0"  # Returns 24

Tailscale Integration

Get-OPNSenseTailscaleStatus

Retrieves the status of Tailscale on an OPNSense firewall.

Syntax

Get-OPNSenseTailscaleStatus

Examples

# Get Tailscale status
Get-OPNSenseTailscaleStatus

Install-OPNSenseTailscale

Installs the Tailscale plugin on an OPNSense firewall.

Syntax

Install-OPNSenseTailscale
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Install Tailscale
Install-OPNSenseTailscale

# Install Tailscale without confirmation
Install-OPNSenseTailscale -Force

Enable-OPNSenseTailscale

Enables Tailscale on an OPNSense firewall.

Syntax

Enable-OPNSenseTailscale
    -AuthKey <String>
    [-Hostname <String>]
    [-AcceptDNS <Boolean>]
    [-AcceptRoutes <Boolean>]
    [-AdvertiseRoutes <String>]
    [-ExitNode <Boolean>]
    [-Force]
    [-PassThru]

Parameters

AuthKey - The Tailscale authentication key.
Hostname - The hostname to use for the Tailscale node.
AcceptDNS - Whether to accept DNS settings from Tailscale.
AcceptRoutes - Whether to accept routes from Tailscale.
AdvertiseRoutes - The routes to advertise to Tailscale.
ExitNode - Whether to use this node as an exit node.
Force - Suppresses the confirmation prompt.
PassThru - Returns the Tailscale status.

Examples

# Enable Tailscale with basic settings
Enable-OPNSenseTailscale -AuthKey "tskey-auth-abcdef123456"

# Enable Tailscale with route advertisement
Enable-OPNSenseTailscale -AuthKey "tskey-auth-abcdef123456" -AdvertiseRoutes "192.168.1.0/24,10.0.0.0/8"

Cron Job Management

Get-OPNSenseCronJob

Retrieves cron jobs from an OPNSense firewall.

Syntax

Get-OPNSenseCronJob
    [-Uuid <String>]
    [-Description <String>]
    [-Command <String>]

Parameters

Uuid - The UUID of a specific cron job to retrieve.
Description - Filter cron jobs by description.
Command - Filter cron jobs by command.

Examples

# Get all cron jobs
Get-OPNSenseCronJob

# Get a specific cron job by UUID
Get-OPNSenseCronJob -Uuid "a1b2c3d4-e5f6-g7h8-i9j0-k1l2m3n4o5p6"

# Get cron jobs with a specific description
Get-OPNSenseCronJob -Description "Backup"

New-OPNSenseCronJob

Creates a new cron job on an OPNSense firewall.

Syntax

New-OPNSenseCronJob
    -Description <String>
    -Command <String>
    -Parameters <String>
    -Minute <String>
    -Hour <String>
    -Day <String>
    -Month <String>
    -Weekday <String>
    [-Enabled <Boolean>]
    [-Force]

Parameters

Description - A description for the cron job.
Command - The command to execute.
Parameters - The parameters for the command.
Minute - The minute(s) when the job should run (0-59, *, */5, etc.).
Hour - The hour(s) when the job should run (0-23, *, */2, etc.).
Day - The day(s) of the month when the job should run (1-31, *, */2, etc.).
Month - The month(s) when the job should run (1-12, *, */2, etc.).
Weekday - The weekday(s) when the job should run (0-7, *, etc., where 0 and 7 are Sunday).
Enabled - Whether the cron job is enabled. Default is true.
Force - Suppresses the confirmation prompt.

Examples

# Create a daily backup cron job
New-OPNSenseCronJob -Description "Daily Backup" -Command "configctl" -Parameters "system backup" -Minute "0" -Hour "2" -Day "*" -Month "*" -Weekday "*"

# Create a weekly update cron job
New-OPNSenseCronJob -Description "Weekly Update" -Command "configctl" -Parameters "firmware update" -Minute "0" -Hour "3" -Day "*" -Month "*" -Weekday "0"

Apply-OPNSenseCronJobChanges

Applies pending cron job changes on an OPNSense firewall.

Syntax

Apply-OPNSenseCronJobChanges
    [-Force]

Parameters

Force - Suppresses the confirmation prompt.

Examples

# Apply cron job changes
Apply-OPNSenseCronJobChanges

# Apply cron job changes without confirmation
Apply-OPNSenseCronJobChanges -Force

33 KiB Raw Permalink Blame History

API Reference

Table of Contents

Connection Management

Connect-OPNSense

Syntax

Parameters

Examples

Disconnect-OPNSense

Syntax

Examples

Firewall Management

Get-OPNSenseFirewallRule

Syntax

Parameters

Examples

New-OPNSenseFirewallRule

Syntax

Parameters

Examples

Set-OPNSenseFirewallRule

Syntax

Parameters

Examples

Remove-OPNSenseFirewallRule

Syntax

Parameters

Examples

Enable-OPNSenseFirewallRule

Syntax

Parameters

Examples

Disable-OPNSenseFirewallRule

Syntax

Parameters

Examples

Apply-OPNSenseFirewallChanges

Syntax

Parameters

Examples

NAT Management

Get-OPNSenseNatRule

Syntax

Parameters

Examples

New-OPNSensePortForwardRule

Syntax

Parameters

Examples

Apply-OPNSenseNatChanges

Syntax

Parameters

Examples

Interface Management

Get-OPNSenseInterface

Syntax

Parameters

Examples

Set-OPNSenseInterface

Syntax

Parameters

Examples

Apply-OPNSenseInterfaceChanges

Syntax

Parameters

Examples

VLAN Management

Get-OPNSenseVLAN

Syntax

Parameters

Examples

New-OPNSenseVLAN

Syntax

Parameters

Examples

New-OPNSenseSubnetVLANs

Syntax

Parameters

Examples

Gateway Management

33 KiB

Raw Permalink Blame History