mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-15 17:11:30 +00:00
Josh Siviour
da33e574d4
* fix: repoint DB-node ovn-northd at RAFT member list; extend add-nat deadline Two related fixes for multi-node OVN clusters: - setup-ovn.sh (mulga-siv-504): in the clustered --management branch, point ovn-northd's client NB/SB connections at the full RAFT member list derived from OVN_REMOTE, so the active northd follows the leader instead of dialing its local member only. Without this, northd stops advancing SB_Global.nb_cfg once leadership moves off the node, wedging the ovn-nbctl --wait=hv barrier. Guarded on a real member list so the standalone single-DB-node path is unchanged. - utils/nats.go (mulga-js-206): raise the add-nat request deadline from 10s to 45s so the client no longer rolls back before the server-side --wait=hv flows barrier (30s) completes. * fix: stop ovn-northd restart from tearing down split NB/SB ovsdb servers The packaged ovn-northd.service ExecStop runs 'ovn-ctl stop_northd' without --ovn-manage-ovsdb=no, so restarting northd to apply OVN_CTL_OPTS also stops the separately-managed NB/SB ovsdb-server units. On a clean clustered bring-up this races the freshly-started DBs and kills them, so setup-ovn's wait for the NB socket times out and the RAFT create/join aborts. Install an ovn-northd.service drop-in overriding ExecStop with --ovn-manage-ovsdb=no so northd never touches the DB lifecycle (mulga-siv-504).
939 lines
40 KiB
Bash
Executable File
939 lines
40 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
# OVN Compute Node Setup for Spinifex VPC Networking
|
|
#
|
|
# This script bootstraps a compute node for OVN-based VPC networking:
|
|
# 1. Installs OVN/OVS packages (if not present)
|
|
# 2. Enables required services (openvswitch-switch, ovn-controller)
|
|
# 3. Creates br-int with secure fail-mode
|
|
# 4. Configures WAN bridge for public subnet uplink (auto-detected or manual)
|
|
# 5. Configures OVS external_ids for OVN chassis identity
|
|
# 6. Applies sysctl tuning for overlay networking
|
|
#
|
|
# Usage:
|
|
# ./scripts/setup-ovn.sh [options]
|
|
#
|
|
# Options:
|
|
# --management Also start OVN central services (NB DB, SB DB, ovn-northd)
|
|
# --wan-bridge=NAME OVS bridge for WAN traffic (default: auto-detect from default route)
|
|
# --wan-iface=NAME Physical NIC to add to the WAN bridge (use with --wan-bridge)
|
|
# --dhcp Obtain gateway IP via DHCP on the WAN bridge interface
|
|
# --mgmt-bridge=NAME OVS bridge for system-instance control plane (default: br-mgmt)
|
|
# --mgmt-cidr=CIDR IPv4 CIDR to assign on the mgmt bridge (default: 10.15.8.1/24)
|
|
# --mgmt-iface=NAME Physical/virtual NIC to enslave to the mgmt bridge (multi-node only)
|
|
# --no-mgmt-bridge Skip mgmt bridge provisioning (for dev-networking hosts)
|
|
# --ovn-remote=ADDR OVN SB DB address; accepts a comma-separated list of
|
|
# SB endpoints for compute nodes pointing at a RAFT
|
|
# cluster (default: tcp:127.0.0.1:6642)
|
|
# --encap-ip=IP Geneve tunnel endpoint IP (default: auto-detect)
|
|
# --db-cluster-local-addr=IP This DB node's own IP for OVSDB RAFT clustering.
|
|
# Enables clustered NB(6643)/SB(6644) DBs (requires
|
|
# --management). Empty --db-cluster-remote-addr ⇒ create
|
|
# the cluster; set ⇒ join it.
|
|
# --db-cluster-remote-addr=IP An existing cluster DB node's IP to join. Omit
|
|
# on the first (init) DB node that forms the cluster.
|
|
#
|
|
# WAN Bridge Auto-Detection:
|
|
# When no --wan-bridge is given, the script checks the default route interface:
|
|
# - If it's an OVS bridge → use it directly for bridge-mappings
|
|
# - If it's a Linux bridge → create OVS br-ext + veth pair to link them
|
|
# (non-destructive, Linux bridge keeps IP/routes, no interruption)
|
|
# - If it's a physical NIC → stop and print guidance (cannot safely move NIC)
|
|
#
|
|
# Examples:
|
|
# # WAN is already on a bridge (tofu-cluster, production):
|
|
# ./scripts/setup-ovn.sh --management
|
|
#
|
|
# # Dedicated WAN NIC (not your SSH NIC — you take responsibility):
|
|
# ./scripts/setup-ovn.sh --management --wan-bridge=br-wan --wan-iface=eth1
|
|
#
|
|
# # Compute node joining an existing cluster:
|
|
# ./scripts/setup-ovn.sh --ovn-remote=tcp:10.0.0.1:6642 --encap-ip=10.0.0.2
|
|
#
|
|
# # DB node 1 — create an OVSDB RAFT cluster (init):
|
|
# ./scripts/setup-ovn.sh --management --db-cluster-local-addr=10.0.0.1
|
|
#
|
|
# # DB nodes 2,3 — join the cluster:
|
|
# ./scripts/setup-ovn.sh --management --db-cluster-local-addr=10.0.0.2 \
|
|
# --db-cluster-remote-addr=10.0.0.1
|
|
#
|
|
# # Compute node pointing at all 3 clustered SB endpoints:
|
|
# ./scripts/setup-ovn.sh --ovn-remote=tcp:10.0.0.1:6642,tcp:10.0.0.2:6642,tcp:10.0.0.3:6642
|
|
#
|
|
# # No WAN bridge (overlay-only, no public subnet):
|
|
# ./scripts/setup-ovn.sh --management --encap-ip=10.0.0.1
|
|
|
|
set -e
|
|
|
|
# Defaults
|
|
MANAGEMENT=false
|
|
WAN_BRIDGE=""
|
|
WAN_IFACE=""
|
|
EXTERNAL_DHCP=false
|
|
MGMT_BRIDGE_ENABLED=true
|
|
MGMT_BRIDGE="br-mgmt"
|
|
MGMT_CIDR="10.15.8.1/24"
|
|
MGMT_IFACE=""
|
|
OVN_REMOTE="tcp:127.0.0.1:6642"
|
|
ENCAP_IP=""
|
|
# OVSDB RAFT clustering. Empty by default ⇒ single, non-clustered ovn-central
|
|
# (dev box, existing single-node clusters). When LOCAL_ADDR is set, the NB/SB
|
|
# DBs run clustered; REMOTE_ADDR empty ⇒ create the cluster, set ⇒ join it.
|
|
DB_CLUSTER_LOCAL_ADDR=""
|
|
DB_CLUSTER_REMOTE_ADDR=""
|
|
# NODE_NAME is left empty by default. The chassis-id pin block at Step 4
|
|
# only runs when --node-name=NAME is explicitly given. Passing nothing
|
|
# preserves whatever system-id already lives in OVS (gold-image UUID,
|
|
# bootstrap-install.sh's pre-written nodeN, manual ansible value, etc.).
|
|
# Bootstrap callers that want IPsec-cert-identity matching pin the
|
|
# system-id themselves before / after invoking setup-ovn.sh — they
|
|
# don't need this script to do it for them.
|
|
NODE_NAME=""
|
|
|
|
# Parse arguments
|
|
for arg in "$@"; do
|
|
case "$arg" in
|
|
--management) MANAGEMENT=true ;;
|
|
--dhcp) EXTERNAL_DHCP=true ;;
|
|
--wan-bridge=*) WAN_BRIDGE="${arg#*=}" ;;
|
|
--wan-iface=*) WAN_IFACE="${arg#*=}" ;;
|
|
--mgmt-bridge=*) MGMT_BRIDGE="${arg#*=}" ;;
|
|
--mgmt-cidr=*) MGMT_CIDR="${arg#*=}" ;;
|
|
--mgmt-iface=*) MGMT_IFACE="${arg#*=}" ;;
|
|
--no-mgmt-bridge) MGMT_BRIDGE_ENABLED=false ;;
|
|
--ovn-remote=*) OVN_REMOTE="${arg#*=}" ;;
|
|
--encap-ip=*) ENCAP_IP="${arg#*=}" ;;
|
|
--db-cluster-local-addr=*) DB_CLUSTER_LOCAL_ADDR="${arg#*=}" ;;
|
|
--db-cluster-remote-addr=*) DB_CLUSTER_REMOTE_ADDR="${arg#*=}" ;;
|
|
--node-name=*) NODE_NAME="${arg#*=}" ;;
|
|
--help|-h)
|
|
sed -n '3,/^set -e/{/^set -e/!p}' "$0"
|
|
exit 0
|
|
;;
|
|
*)
|
|
echo "Unknown option: $arg"
|
|
exit 1
|
|
;;
|
|
esac
|
|
done
|
|
|
|
# OVSDB RAFT clustering runs the NB/SB DBs, so it only applies to management
|
|
# (DB) nodes. A remote addr without a local addr is meaningless (nothing to
|
|
# join with). Fail loudly rather than silently starting a single-node DB.
|
|
if [ -n "$DB_CLUSTER_LOCAL_ADDR" ] && [ "$MANAGEMENT" != true ]; then
|
|
echo "ERROR: --db-cluster-local-addr requires --management (clustered DBs run on management nodes)"
|
|
exit 1
|
|
fi
|
|
if [ -n "$DB_CLUSTER_REMOTE_ADDR" ] && [ -z "$DB_CLUSTER_LOCAL_ADDR" ]; then
|
|
echo "ERROR: --db-cluster-remote-addr requires --db-cluster-local-addr"
|
|
exit 1
|
|
fi
|
|
|
|
# --- WAN bridge auto-detection ---
|
|
# Determine the WAN bridge name and how to set it up.
|
|
WAN_BRIDGE_MODE="" # "existing", "veth", "direct", or ""
|
|
LINUX_BRIDGE="" # Set when WAN_BRIDGE_MODE="veth" — the Linux bridge behind the veth pair
|
|
|
|
detect_wan_bridge() {
|
|
# If --wan-bridge was explicitly given, use it
|
|
if [ -n "$WAN_BRIDGE" ]; then
|
|
if [ -n "$WAN_IFACE" ]; then
|
|
WAN_BRIDGE_MODE="direct"
|
|
elif sudo ovs-vsctl br-exists "$WAN_BRIDGE" 2>/dev/null; then
|
|
WAN_BRIDGE_MODE="existing"
|
|
else
|
|
# Bridge doesn't exist yet and no --wan-iface — create empty OVS bridge
|
|
WAN_BRIDGE_MODE="existing"
|
|
fi
|
|
return
|
|
fi
|
|
|
|
# Auto-detect: find the default route interface
|
|
local default_dev
|
|
default_dev=$(ip -4 route show default 2>/dev/null | awk '{for(i=1;i<=NF;i++) if($i=="dev") print $(i+1)}' | head -1)
|
|
|
|
if [ -z "$default_dev" ]; then
|
|
echo " No default route found — no WAN bridge configured"
|
|
echo " (VMs will not have external connectivity)"
|
|
return
|
|
fi
|
|
|
|
# Check if the default route device is a bridge (Linux or OVS)
|
|
local is_bridge=false
|
|
if ip -d link show "$default_dev" 2>/dev/null | grep -q "bridge"; then
|
|
is_bridge=true
|
|
fi
|
|
if sudo ovs-vsctl br-exists "$default_dev" 2>/dev/null; then
|
|
is_bridge=true
|
|
fi
|
|
|
|
if [ "$is_bridge" = true ]; then
|
|
if sudo ovs-vsctl br-exists "$default_dev" 2>/dev/null; then
|
|
# Already an OVS bridge — use it directly for bridge-mappings
|
|
WAN_BRIDGE="$default_dev"
|
|
WAN_BRIDGE_MODE="existing"
|
|
echo " Auto-detected WAN bridge: $WAN_BRIDGE (OVS bridge, default route)"
|
|
else
|
|
# Linux bridge — link to OVS via veth pair (non-destructive)
|
|
LINUX_BRIDGE="$default_dev"
|
|
WAN_BRIDGE="br-ext"
|
|
WAN_BRIDGE_MODE="veth"
|
|
echo " Auto-detected Linux bridge: $LINUX_BRIDGE (default route)"
|
|
echo " Will create OVS bridge br-ext + veth pair to link them"
|
|
fi
|
|
return
|
|
fi
|
|
|
|
# Default route is a physical NIC — cannot safely move it to OVS
|
|
# because it might be carrying SSH.
|
|
local wan_ip
|
|
wan_ip=$(ip -4 -o addr show "$default_dev" 2>/dev/null | awk '{print $4}' | cut -d/ -f1 | head -1)
|
|
|
|
echo ""
|
|
echo "============================================================"
|
|
echo " WAN interface '$default_dev' ($wan_ip) is a physical NIC."
|
|
echo " Cannot auto-create a bridge — this may drop your connection."
|
|
echo ""
|
|
echo " Options:"
|
|
echo ""
|
|
echo " 1. Create a WAN bridge first (e.g. via netplan), then re-run:"
|
|
echo " ./scripts/setup-ovn.sh --management"
|
|
echo ""
|
|
echo " 2. Dedicated WAN NIC (NOT your SSH connection):"
|
|
echo " ./scripts/setup-ovn.sh --management --wan-bridge=br-wan --wan-iface=$default_dev"
|
|
echo ""
|
|
echo " 3. No external networking (overlay-only):"
|
|
echo " ./scripts/setup-ovn.sh --management --encap-ip=$wan_ip"
|
|
echo "============================================================"
|
|
echo ""
|
|
exit 1
|
|
}
|
|
|
|
detect_wan_bridge
|
|
|
|
# Auto-detect encap IP if not specified
|
|
if [ -z "$ENCAP_IP" ]; then
|
|
# Prefer br-vpc IP if it exists (dedicated VPC data plane)
|
|
if ip -4 addr show br-vpc >/dev/null 2>&1; then
|
|
ENCAP_IP=$(ip -4 -o addr show br-vpc 2>/dev/null | awk '{print $4}' | cut -d/ -f1 | head -1)
|
|
if [ -n "$ENCAP_IP" ]; then
|
|
echo "Auto-detected encap IP from br-vpc: $ENCAP_IP"
|
|
fi
|
|
fi
|
|
# Fall back to default route source IP
|
|
if [ -z "$ENCAP_IP" ]; then
|
|
ENCAP_IP=$(ip -4 route get 8.8.8.8 2>/dev/null | awk '/src/{print $7}' | head -1)
|
|
if [ -z "$ENCAP_IP" ]; then
|
|
ENCAP_IP="127.0.0.1"
|
|
fi
|
|
echo "Auto-detected encap IP: $ENCAP_IP"
|
|
fi
|
|
fi
|
|
|
|
echo "=== Spinifex OVN Compute Node Setup ==="
|
|
echo " Management node: $MANAGEMENT"
|
|
if [ -n "$DB_CLUSTER_LOCAL_ADDR" ]; then
|
|
if [ -n "$DB_CLUSTER_REMOTE_ADDR" ]; then
|
|
echo " DB RAFT role: join (local=$DB_CLUSTER_LOCAL_ADDR remote=$DB_CLUSTER_REMOTE_ADDR)"
|
|
else
|
|
echo " DB RAFT role: create (local=$DB_CLUSTER_LOCAL_ADDR)"
|
|
fi
|
|
fi
|
|
if [ -n "$WAN_BRIDGE" ]; then
|
|
echo " WAN bridge: $WAN_BRIDGE ($WAN_BRIDGE_MODE)"
|
|
if [ -n "$LINUX_BRIDGE" ]; then
|
|
echo " Linux bridge: $LINUX_BRIDGE (linked via veth pair)"
|
|
fi
|
|
if [ -n "$WAN_IFACE" ]; then
|
|
echo " WAN interface: $WAN_IFACE"
|
|
fi
|
|
else
|
|
echo " WAN bridge: none (overlay-only)"
|
|
fi
|
|
echo " OVN Remote (SB): $OVN_REMOTE"
|
|
echo " Encap IP: $ENCAP_IP"
|
|
echo ""
|
|
|
|
# Packages (openvswitch-switch, ovn-host, openvswitch-ipsec, strongswan-charon,
|
|
# and ovn-central on management nodes) are baked into the gold image via
|
|
# scripts/tofu-cluster/image-builder/scripts/provision.sh. Runtime apt-get
|
|
# was removed to keep CI off the (flaky) apt-cacher-ng path. If a package is
|
|
# missing, the downstream ovs/ovn commands will fail loudly — the fix is to
|
|
# rebuild the gold image, not to re-add apt-get here.
|
|
|
|
# strongswan-charon ships an AppArmor profile for /usr/lib/ipsec/charon that
|
|
# only allows reading from /etc/ipsec.*, /etc/strongswan.*, and a few other
|
|
# fixed paths. ovs-monitor-ipsec writes the per-tunnel strongSwan config with
|
|
# absolute paths to our peer cert + key under /etc/spinifex/ipsec/ AND to the
|
|
# cluster CA at /etc/spinifex/ca.pem, so charon hits "Permission denied" on
|
|
# both load paths and surfaces as `no trusted RSA public key found for
|
|
# '<peer>'` (CA can't be loaded → can't validate peer cert chain → no SAs).
|
|
# The profile includes a 'local' override file expressly for site additions
|
|
# — grant reads on /etc/spinifex/** (covers ca.pem AND ipsec/peer.{pem,key})
|
|
# and reload.
|
|
if [ -d /etc/apparmor.d/local ]; then
|
|
LOCAL_OVERRIDE=/etc/apparmor.d/local/usr.lib.ipsec.charon
|
|
# Always rewrite — re-runs may have an older, narrower rule (e.g. the
|
|
# initial /etc/spinifex/ipsec/** only) that misses /etc/spinifex/ca.pem.
|
|
echo " Adding AppArmor read grant for /etc/spinifex (cert + CA) to charon profile"
|
|
echo "/etc/spinifex/** r," | sudo tee "$LOCAL_OVERRIDE" >/dev/null
|
|
sudo apparmor_parser -r /etc/apparmor.d/usr.lib.ipsec.charon 2>/dev/null || true
|
|
fi
|
|
|
|
# --- Step 2: Enable services ---
|
|
echo ""
|
|
echo "Step 2: Enabling services..."
|
|
|
|
sudo systemctl enable openvswitch-switch
|
|
sudo systemctl start openvswitch-switch
|
|
echo " openvswitch-switch: started"
|
|
|
|
if [ "$MANAGEMENT" = true ]; then
|
|
sudo systemctl enable ovn-central
|
|
|
|
if [ -n "$DB_CLUSTER_LOCAL_ADDR" ]; then
|
|
# Clustered NB/SB via native OVSDB RAFT. Both per-DB units source one
|
|
# shared OVN_CTL_OPTS from /etc/default/ovn-central; each run_*_ovsdb
|
|
# consumes only its own --db-{nb,sb}-* flags. RAFT ports default to NB
|
|
# 6643 / SB 6644. ovn-ctl creates the cluster when no remote-addr is
|
|
# given (and no existing .db file), joins when one is.
|
|
OVN_CTL_OPTS="--db-nb-cluster-local-addr=$DB_CLUSTER_LOCAL_ADDR --db-sb-cluster-local-addr=$DB_CLUSTER_LOCAL_ADDR"
|
|
if [ -n "$DB_CLUSTER_REMOTE_ADDR" ]; then
|
|
OVN_CTL_OPTS="$OVN_CTL_OPTS --db-nb-cluster-remote-addr=$DB_CLUSTER_REMOTE_ADDR --db-sb-cluster-remote-addr=$DB_CLUSTER_REMOTE_ADDR"
|
|
echo " ovn-central: joining RAFT cluster (local=$DB_CLUSTER_LOCAL_ADDR remote=$DB_CLUSTER_REMOTE_ADDR)"
|
|
else
|
|
echo " ovn-central: creating RAFT cluster (local=$DB_CLUSTER_LOCAL_ADDR)"
|
|
fi
|
|
|
|
# Point ovn-northd's client NB/SB connections at the full RAFT member
|
|
# list so the active northd follows the leader. Without this it dials the
|
|
# local member only and stops advancing SB_Global.nb_cfg once leadership
|
|
# moves off this node, wedging the ovn-nbctl --wait=hv flows barrier.
|
|
# Derived from OVN_REMOTE (the SB list); the NB list is the same hosts on
|
|
# 6641. Skipped when OVN_REMOTE is the localhost default (caller passed no
|
|
# member list) so a lone standalone DB node is unaffected.
|
|
if [ "$OVN_REMOTE" != "tcp:127.0.0.1:6642" ]; then
|
|
OVN_REMOTE_NB="${OVN_REMOTE//:6642/:6641}"
|
|
OVN_CTL_OPTS="$OVN_CTL_OPTS --ovn-northd-nb-db=$OVN_REMOTE_NB --ovn-northd-sb-db=$OVN_REMOTE"
|
|
echo " ovn-northd: NB=$OVN_REMOTE_NB SB=$OVN_REMOTE (RAFT member list)"
|
|
fi
|
|
|
|
echo "OVN_CTL_OPTS=\"$OVN_CTL_OPTS\"" | sudo tee /etc/default/ovn-central >/dev/null
|
|
echo " wrote /etc/default/ovn-central"
|
|
|
|
# The packaged ovn-northd.service ExecStop runs `ovn-ctl stop_northd`
|
|
# without --ovn-manage-ovsdb=no, so restarting northd also tears down the
|
|
# NB/SB ovsdb-server units. With the split clustered units those DBs are
|
|
# owned by their own units, so override ExecStop to leave them alone —
|
|
# otherwise the restart below races and kills the freshly-started DBs.
|
|
sudo mkdir -p /etc/systemd/system/ovn-northd.service.d
|
|
sudo tee /etc/systemd/system/ovn-northd.service.d/no-manage-ovsdb.conf >/dev/null <<'EOF'
|
|
[Service]
|
|
ExecStop=
|
|
ExecStop=/usr/share/ovn/scripts/ovn-ctl stop_northd --no-monitor --ovn-manage-ovsdb=no
|
|
EOF
|
|
sudo systemctl daemon-reload
|
|
|
|
# The ovn-central aggregator is ExecStart=/bin/true, so restarting it
|
|
# won't restart the children — restart the per-DB units directly to
|
|
# pick up the new OVN_CTL_OPTS.
|
|
sudo systemctl restart ovn-ovsdb-server-nb ovn-ovsdb-server-sb ovn-northd
|
|
echo " ovn-central: started clustered (NB DB + SB DB + ovn-northd)"
|
|
else
|
|
sudo systemctl start ovn-central
|
|
echo " ovn-central: started (NB DB + SB DB + ovn-northd)"
|
|
fi
|
|
|
|
# Wait for OVN NB DB socket to become available
|
|
for i in $(seq 1 15); do
|
|
if sudo ovn-nbctl --timeout=2 get-connection >/dev/null 2>&1; then
|
|
break
|
|
fi
|
|
echo " Waiting for OVN NB DB... ($i/15)"
|
|
sleep 1
|
|
done
|
|
|
|
# Set the NB/SB client listen addresses. set-connection writes through RAFT
|
|
# (replicated cluster-wide), so it only runs on the create node — a joining
|
|
# node would redirect to the leader, which the init node already configured.
|
|
if [ -z "$DB_CLUSTER_REMOTE_ADDR" ]; then
|
|
sudo ovn-nbctl set-connection ptcp:6641
|
|
sudo ovn-sbctl set-connection ptcp:6642
|
|
echo " OVN NB DB listening on tcp:6641"
|
|
echo " OVN SB DB listening on tcp:6642"
|
|
fi
|
|
fi
|
|
|
|
# --- Step 3: Create and configure br-int ---
|
|
echo ""
|
|
echo "Step 3: Configuring br-int..."
|
|
|
|
sudo ovs-vsctl --may-exist add-br br-int
|
|
sudo ovs-vsctl set Bridge br-int fail-mode=secure
|
|
sudo ovs-vsctl set Bridge br-int other-config:disable-in-band=true
|
|
sudo ip link set br-int up
|
|
echo " br-int: created, fail-mode=secure, up"
|
|
|
|
# Mark OVS internal netdevs Unmanaged for systemd-networkd. Without this,
|
|
# Trixie's networkd takes ownership of any unconfigured iface and may bring
|
|
# br-int/br-ext admin-down after setup-ovn.sh's `ip link set up` (no Match
|
|
# rule => default management => no carrier => link down). OVS dataplane
|
|
# still forwards, but ovn-controller flow programming and any tooling that
|
|
# probes link state misbehave. Unmanaged=yes keeps OVS in sole control.
|
|
OVS_INTERNAL_NET=/etc/systemd/network/05-spinifex-ovs-internal.network
|
|
if [ ! -f "$OVS_INTERNAL_NET" ]; then
|
|
sudo tee "$OVS_INTERNAL_NET" >/dev/null <<'NETWORK'
|
|
[Match]
|
|
Name=br-int br-ext
|
|
|
|
[Link]
|
|
Unmanaged=yes
|
|
NETWORK
|
|
sudo networkctl reload 2>/dev/null || true
|
|
echo " wrote $OVS_INTERNAL_NET (Unmanaged=yes for br-int br-ext)"
|
|
fi
|
|
|
|
# --- Step 3b: Configure WAN bridge for public subnet uplink ---
|
|
if [ -n "$WAN_BRIDGE" ]; then
|
|
echo ""
|
|
echo "Step 3b: Configuring WAN bridge ($WAN_BRIDGE) for public subnet uplink..."
|
|
|
|
# Rip down any stale veth persistence from a previous veth-mode install
|
|
# when switching to any non-veth mode. Idempotent — each command uses
|
|
# --if-exists / 2>/dev/null to tolerate absence. Without this, the
|
|
# veth pair re-materialises on reboot and fights the current mode's
|
|
# bridge plumbing (Fix 1, mulga-998.b, per D17).
|
|
if [ "$WAN_BRIDGE_MODE" != "veth" ]; then
|
|
sudo rm -f /etc/systemd/network/14-spinifex-br-wan.netdev \
|
|
/etc/systemd/network/15-spinifex-veth-wan.netdev \
|
|
/etc/systemd/network/15-spinifex-veth-wan.network \
|
|
/etc/systemd/network/16-spinifex-veth-wan-ovs.network
|
|
sudo networkctl reload 2>/dev/null || true
|
|
sudo ovs-vsctl --if-exists del-port veth-wan-ovs 2>/dev/null || true
|
|
sudo ip link del veth-wan-br 2>/dev/null || true
|
|
fi
|
|
|
|
case "$WAN_BRIDGE_MODE" in
|
|
existing)
|
|
# Already an OVS bridge (from a previous run or explicit --wan-bridge).
|
|
if ! sudo ovs-vsctl br-exists "$WAN_BRIDGE" 2>/dev/null; then
|
|
sudo ovs-vsctl --may-exist add-br "$WAN_BRIDGE"
|
|
echo " created OVS bridge: $WAN_BRIDGE"
|
|
fi
|
|
sudo ip link set "$WAN_BRIDGE" up
|
|
echo " $WAN_BRIDGE: OVS bridge, up"
|
|
;;
|
|
|
|
veth)
|
|
# Linux bridge detected (e.g. br-wan from cloud-init/netplan).
|
|
# OVN bridge-mappings require an OVS bridge. Rather than converting
|
|
# the Linux bridge (destructive, causes WAN interruption), we create
|
|
# a separate OVS bridge and link them with a veth pair:
|
|
#
|
|
# br-wan (Linux, keeps IP/routes) ←→ veth pair ←→ br-ext (OVS, for OVN)
|
|
#
|
|
# No network interruption. The Linux bridge is untouched.
|
|
|
|
# Create OVS bridge
|
|
if ! sudo ovs-vsctl br-exists "$WAN_BRIDGE" 2>/dev/null; then
|
|
sudo ovs-vsctl --may-exist add-br "$WAN_BRIDGE"
|
|
echo " created OVS bridge: $WAN_BRIDGE"
|
|
fi
|
|
sudo ip link set "$WAN_BRIDGE" up
|
|
|
|
# Create veth pair (idempotent)
|
|
if ! ip link show veth-wan-br >/dev/null 2>&1; then
|
|
sudo ip link add veth-wan-br type veth peer name veth-wan-ovs
|
|
echo " created veth pair: veth-wan-br ↔ veth-wan-ovs"
|
|
else
|
|
echo " veth pair already exists: veth-wan-br ↔ veth-wan-ovs"
|
|
fi
|
|
|
|
# Enslave veth-wan-br to the Linux bridge
|
|
if ! ip link show veth-wan-br 2>/dev/null | grep -q "master $LINUX_BRIDGE"; then
|
|
sudo ip link set veth-wan-br master "$LINUX_BRIDGE"
|
|
echo " veth-wan-br → $LINUX_BRIDGE (Linux bridge)"
|
|
fi
|
|
sudo ip link set veth-wan-br up
|
|
|
|
# Add veth-wan-ovs to the OVS bridge
|
|
if ! sudo ovs-vsctl port-to-br veth-wan-ovs >/dev/null 2>&1; then
|
|
sudo ovs-vsctl --may-exist add-port "$WAN_BRIDGE" veth-wan-ovs
|
|
echo " veth-wan-ovs → $WAN_BRIDGE (OVS bridge)"
|
|
fi
|
|
sudo ip link set veth-wan-ovs up
|
|
|
|
echo " $LINUX_BRIDGE (Linux) ↔ veth pair ↔ $WAN_BRIDGE (OVS)"
|
|
echo " $LINUX_BRIDGE keeps its IP and routes — no interruption"
|
|
|
|
# Persist the veth pair across reboot via systemd-networkd. Veths
|
|
# are kernel-only and vanish on reboot; without persistence vpcd
|
|
# starts with the OVS port pointing at a nonexistent peer and
|
|
# silently falls back to direct mode (Fix 1, mulga-998.b).
|
|
#
|
|
# networkd's Bridge= directive requires the target bridge to be a
|
|
# known NetDev. On ISO-installed nodes the installer writes
|
|
# 11-spinifex-br-wan.netdev, which the gate below detects and
|
|
# skips this write. On binary-installed nodes where the operator
|
|
# manages br-wan outside networkd (e.g. cloud-init), this file
|
|
# fills the gap so veth-wan-br resolves its bridge on reboot.
|
|
# `Failed to create netdev: File exists` is harmless — networkd
|
|
# matches the existing kernel bridge by name+kind.
|
|
#
|
|
# Gate: skip the write if any .netdev (installer, cloud-init,
|
|
# netplan, manual) already declares this bridge — don't clobber
|
|
# existing networkd config. networkd searches /etc, /run, /usr/lib;
|
|
# check all three. Our own file is excluded so idempotent re-runs
|
|
# still rewrite when needed.
|
|
BR_WAN_NETDEV="/etc/systemd/network/14-spinifex-br-wan.netdev"
|
|
VETH_NETDEV="/etc/systemd/network/15-spinifex-veth-wan.netdev"
|
|
VETH_NETWORK="/etc/systemd/network/15-spinifex-veth-wan.network"
|
|
VETH_OVS_NETWORK="/etc/systemd/network/16-spinifex-veth-wan-ovs.network"
|
|
EXISTING_BR_NETDEV=$(grep -rls --include="*.netdev" -E "^\s*Name=$LINUX_BRIDGE\s*$" \
|
|
/etc/systemd/network /run/systemd/network /usr/lib/systemd/network 2>/dev/null \
|
|
| grep -v "^$BR_WAN_NETDEV$" || true)
|
|
if [ -n "$EXISTING_BR_NETDEV" ]; then
|
|
echo " skipping $BR_WAN_NETDEV — operator-managed NetDev already declares $LINUX_BRIDGE: $EXISTING_BR_NETDEV"
|
|
else
|
|
sudo tee "$BR_WAN_NETDEV" >/dev/null <<NETDEV
|
|
[NetDev]
|
|
Name=$LINUX_BRIDGE
|
|
Kind=bridge
|
|
NETDEV
|
|
fi
|
|
sudo tee "$VETH_NETDEV" >/dev/null <<NETDEV
|
|
[NetDev]
|
|
Name=veth-wan-br
|
|
Kind=veth
|
|
|
|
[Peer]
|
|
Name=veth-wan-ovs
|
|
NETDEV
|
|
sudo tee "$VETH_NETWORK" >/dev/null <<NETWORK
|
|
[Match]
|
|
Name=veth-wan-br
|
|
|
|
[Network]
|
|
Bridge=$LINUX_BRIDGE
|
|
ConfigureWithoutCarrier=yes
|
|
NETWORK
|
|
# Second unit admin-ups the OVS end of the pair. OVS owns the port
|
|
# (enslaved via ovs-vsctl add-port above) but does not flip admin
|
|
# state on external ports — that's networkd's job. Without this,
|
|
# veth-wan-ovs stays DOWN after reboot, peer goes LOWERLAYERDOWN,
|
|
# br-wan loses carrier (Fix 1 follow-up, mulga-998.b).
|
|
sudo tee "$VETH_OVS_NETWORK" >/dev/null <<NETWORK
|
|
[Match]
|
|
Name=veth-wan-ovs
|
|
|
|
[Link]
|
|
RequiredForOnline=no
|
|
|
|
[Network]
|
|
ConfigureWithoutCarrier=yes
|
|
NETWORK
|
|
sudo networkctl reload 2>/dev/null || true
|
|
echo " wrote $VETH_NETDEV + $VETH_NETWORK + $VETH_OVS_NETWORK (veth persists on reboot)"
|
|
;;
|
|
|
|
direct)
|
|
# Add WAN NIC directly to OVS bridge. The NIC becomes an OVS slave —
|
|
# its IP (if any) is no longer reachable from the host. The user has
|
|
# confirmed this NIC is NOT their SSH connection.
|
|
if ! ip link show "$WAN_IFACE" >/dev/null 2>&1; then
|
|
echo " ERROR: interface $WAN_IFACE does not exist"
|
|
echo " Available interfaces:"
|
|
ip -o link show | awk -F': ' '{print " " $2}'
|
|
exit 1
|
|
fi
|
|
|
|
sudo ovs-vsctl --may-exist add-br "$WAN_BRIDGE"
|
|
sudo ip link set "$WAN_BRIDGE" up
|
|
|
|
if sudo ovs-vsctl port-to-br "$WAN_IFACE" >/dev/null 2>&1; then
|
|
echo " $WAN_IFACE already on $(sudo ovs-vsctl port-to-br "$WAN_IFACE")"
|
|
else
|
|
sudo ovs-vsctl --may-exist add-port "$WAN_BRIDGE" "$WAN_IFACE"
|
|
echo " added $WAN_IFACE directly to $WAN_BRIDGE"
|
|
fi
|
|
sudo ip link set "$WAN_IFACE" up
|
|
echo " $WAN_BRIDGE: direct bridge on $WAN_IFACE"
|
|
echo " NOTE: $WAN_IFACE is now an OVS port — no host IP on this NIC"
|
|
;;
|
|
esac
|
|
|
|
# --- DHCP: obtain gateway IP for OVN SNAT ---
|
|
if [ "$EXTERNAL_DHCP" = true ]; then
|
|
echo ""
|
|
echo "Step 3c: Obtaining external gateway IP via DHCP..."
|
|
|
|
# DHCP on the WAN bridge itself (direct/existing/veth).
|
|
DHCP_IFACE="$WAN_BRIDGE"
|
|
|
|
# Run DHCP client to get a lease
|
|
if command -v dhcpcd >/dev/null 2>&1; then
|
|
sudo dhcpcd --waitip=4 --timeout 15 "$DHCP_IFACE" 2>/dev/null || true
|
|
elif command -v dhclient >/dev/null 2>&1; then
|
|
sudo dhclient -1 -timeout 15 "$DHCP_IFACE" 2>/dev/null || true
|
|
else
|
|
echo " WARNING: no DHCP client found (dhcpcd or dhclient)"
|
|
echo " Install dhcpcd-base or isc-dhcp-client, or set gateway_ip manually"
|
|
fi
|
|
|
|
# Read the obtained IP
|
|
DHCP_IP=$(ip -4 addr show dev "$DHCP_IFACE" 2>/dev/null | awk '/inet /{print $2}' | head -1 | cut -d/ -f1)
|
|
if [ -n "$DHCP_IP" ]; then
|
|
echo " DHCP obtained: $DHCP_IP on $DHCP_IFACE"
|
|
|
|
# Write the gateway IP to the spinifex config so vpcd can use it
|
|
CONFIG_DIR="${CONFIG_DIR:-$HOME/spinifex/config}"
|
|
CONFIG_FILE="$CONFIG_DIR/spinifex.toml"
|
|
if [ -f "$CONFIG_FILE" ]; then
|
|
if grep -q "gateway_ip" "$CONFIG_FILE"; then
|
|
sed -i "s/gateway_ip.*/gateway_ip = \"$DHCP_IP\"/" "$CONFIG_FILE"
|
|
else
|
|
sed -i "/^gateway *=.*/a gateway_ip = \"$DHCP_IP\"" "$CONFIG_FILE"
|
|
fi
|
|
echo " Updated $CONFIG_FILE with gateway_ip = $DHCP_IP"
|
|
else
|
|
echo " WARNING: $CONFIG_FILE not found — set gateway_ip manually"
|
|
fi
|
|
else
|
|
echo " WARNING: DHCP failed to obtain IP on $DHCP_IFACE"
|
|
echo " VMs will not have external connectivity until gateway_ip is configured"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# --- Step 3d: Management bridge for system-instance control plane ---
|
|
# br-mgmt is an OVS bridge (not L2-learning Linux bridge, not part of OVN
|
|
# overlay). fail-mode=standalone makes it behave like a plain L2 switch
|
|
# without OVN flows; it is excluded from ovn-bridge-mappings so
|
|
# ovn-controller ignores it. System instance TAPs attach via ovs-vsctl
|
|
# add-port (see SetupMgmtTapDevice in daemon/network.go).
|
|
if [ "$MGMT_BRIDGE_ENABLED" = true ]; then
|
|
echo ""
|
|
echo "Step 3d: Configuring management bridge ($MGMT_BRIDGE)..."
|
|
|
|
sudo ovs-vsctl --may-exist add-br "$MGMT_BRIDGE"
|
|
sudo ovs-vsctl set Bridge "$MGMT_BRIDGE" \
|
|
fail-mode=standalone \
|
|
other-config:disable-in-band=true
|
|
sudo ip link set "$MGMT_BRIDGE" up
|
|
echo " $MGMT_BRIDGE: OVS bridge, fail-mode=standalone, up"
|
|
|
|
# Enslave physical/virtual mgmt NIC when provided (multi-node deployments
|
|
# where the node's mgmt subnet spans multiple hosts).
|
|
if [ -n "$MGMT_IFACE" ]; then
|
|
if ! ip link show "$MGMT_IFACE" >/dev/null 2>&1; then
|
|
echo " ERROR: mgmt interface $MGMT_IFACE does not exist"
|
|
ip -o link show | awk -F': ' '{print " " $2}'
|
|
exit 1
|
|
fi
|
|
|
|
# Drop any existing IP on the NIC — IP belongs on the bridge.
|
|
sudo ip addr flush dev "$MGMT_IFACE" || true
|
|
sudo ovs-vsctl --may-exist add-port "$MGMT_BRIDGE" "$MGMT_IFACE"
|
|
sudo ip link set "$MGMT_IFACE" up
|
|
echo " $MGMT_IFACE: port on $MGMT_BRIDGE"
|
|
fi
|
|
|
|
if [ -n "$MGMT_CIDR" ]; then
|
|
sudo ip addr replace "$MGMT_CIDR" dev "$MGMT_BRIDGE"
|
|
echo " $MGMT_BRIDGE: address $MGMT_CIDR"
|
|
|
|
# Persist the IP across reboots via a systemd-networkd drop-in. The
|
|
# OVS bridge definition itself survives in ovsdb; only the L3 IP
|
|
# needs re-applying on boot.
|
|
MGMT_NETD_UNIT="/etc/systemd/network/10-spinifex-mgmt.network"
|
|
sudo tee "$MGMT_NETD_UNIT" >/dev/null <<NETD
|
|
[Match]
|
|
Name=$MGMT_BRIDGE
|
|
|
|
[Network]
|
|
Address=$MGMT_CIDR
|
|
ConfigureWithoutCarrier=yes
|
|
NETD
|
|
echo " wrote $MGMT_NETD_UNIT (IP persists on reboot via systemd-networkd)"
|
|
fi
|
|
fi
|
|
|
|
# --- Step 4: Configure OVN external_ids ---
|
|
echo ""
|
|
echo "Step 4: Setting OVS external_ids for OVN..."
|
|
|
|
if [ -n "$WAN_BRIDGE" ]; then
|
|
BRIDGE_MAPPINGS="external:${WAN_BRIDGE}"
|
|
sudo ovs-vsctl set Open_vSwitch . \
|
|
external_ids:ovn-remote="$OVN_REMOTE" \
|
|
external_ids:ovn-encap-ip="$ENCAP_IP" \
|
|
external_ids:ovn-encap-type="geneve" \
|
|
external_ids:ovn-bridge-mappings="$BRIDGE_MAPPINGS"
|
|
echo " ovn-bridge-mappings: $BRIDGE_MAPPINGS"
|
|
else
|
|
sudo ovs-vsctl set Open_vSwitch . \
|
|
external_ids:ovn-remote="$OVN_REMOTE" \
|
|
external_ids:ovn-encap-ip="$ENCAP_IP" \
|
|
external_ids:ovn-encap-type="geneve"
|
|
fi
|
|
|
|
# Pin OVS system-id (= OVN chassis-id) to NODE_NAME when --node-name was
|
|
# explicitly given. Reasons to pin:
|
|
# 1. IPsec identity: ovs-monitor-ipsec uses chassis-id as the IKEv2
|
|
# `@<name>` peer identity. Our per-node IPsec peer cert
|
|
# (admin.GenerateIPSecPeerCert) carries the cluster node name as CN
|
|
# + dnsName SAN — see spx admin init/join, which take --node NAME and
|
|
# bake NAME into the cert. Leaving chassis-id as the package-generated
|
|
# UUID would cause `received AUTHENTICATION_FAILED` because charon
|
|
# validates `@<UUID>` against a cert dnsName=<NODE_NAME>.
|
|
# 2. Ops legibility: `ovn-sbctl show` lists chassis by name, not UUID.
|
|
#
|
|
# When --node-name is NOT given (CI bootstrap-install.sh today, dev
|
|
# single-node bring-up, ansible roles that don't yet pass it), leave the
|
|
# system-id alone. A hostname fallback used to live here, but on CI
|
|
# single-node it rewrote system-id from the gold-image UUID to a
|
|
# different hostname while the existing SBDB chassis row kept name=UUID;
|
|
# vpcd's discoverChassis then logged "skipping stale local chassis" and
|
|
# refused to start. Preserving the on-disk value is always safe — any
|
|
# caller that needs IPsec cert identity matching pins it themselves.
|
|
if [ -n "$NODE_NAME" ]; then
|
|
echo "$NODE_NAME" | sudo tee /etc/openvswitch/system-id.conf >/dev/null
|
|
sudo ovs-vsctl set Open_vSwitch . external_ids:system-id="$NODE_NAME"
|
|
echo " system-id: $NODE_NAME (pinned via --node-name)"
|
|
else
|
|
CURRENT_ID=$(sudo ovs-vsctl get Open_vSwitch . external_ids:system-id 2>/dev/null | tr -d '"')
|
|
echo " system-id: ${CURRENT_ID:-<unset>} (preserved; no --node-name given)"
|
|
fi
|
|
echo " ovn-remote: $OVN_REMOTE"
|
|
echo " ovn-encap-ip: $ENCAP_IP"
|
|
echo " ovn-encap-type: geneve"
|
|
|
|
# --- Step 5: Start ovn-controller ---
|
|
echo ""
|
|
echo "Step 5: Starting ovn-controller..."
|
|
|
|
# Set ovn-controller file log level to WARN so it doesn't spam the log with
|
|
# connection-retry INFO messages ("OVNSB commit failed") when the SB DB
|
|
# isn't running. Uses a systemd ExecStartPost so it persists across restarts.
|
|
OVN_CTRL_OVERRIDE="/etc/systemd/system/ovn-controller.service.d/log-level.conf"
|
|
sudo mkdir -p "$(dirname "$OVN_CTRL_OVERRIDE")"
|
|
sudo tee "$OVN_CTRL_OVERRIDE" >/dev/null <<'OVERRIDE'
|
|
[Service]
|
|
ExecStartPost=/bin/sh -c 'OVS_RUNDIR=/var/run/ovn exec /usr/bin/ovs-appctl -t ovn-controller vlog/set file:warn'
|
|
OVERRIDE
|
|
sudo systemctl daemon-reload
|
|
echo " ovn-controller log level: file:warn (via systemd drop-in)"
|
|
|
|
sudo systemctl restart ovn-controller
|
|
echo " ovn-controller: started"
|
|
|
|
# --- Step 6: Sysctl tuning ---
|
|
echo ""
|
|
echo "Step 6: Applying sysctl for overlay networking..."
|
|
|
|
sudo tee /etc/sysctl.d/99-spinifex-vpc.conf >/dev/null <<'SYSCTL'
|
|
# Spinifex VPC networking: enable IP forwarding and disable rp_filter
|
|
# for Geneve overlay traffic on OVS bridges.
|
|
net.ipv4.ip_forward=1
|
|
net.ipv4.conf.all.rp_filter=0
|
|
net.ipv4.conf.default.rp_filter=0
|
|
SYSCTL
|
|
sudo sysctl --system -q
|
|
echo " ip_forward=1, rp_filter=0"
|
|
|
|
# --- Step 6b: Ensure data NIC routing for Geneve tunnels ---
|
|
echo ""
|
|
echo "Step 6b: Configuring data NIC routing for Geneve tunnels..."
|
|
|
|
# When management and data NICs share the same subnet (e.g. both on 10.1.0.0/16),
|
|
# the kernel may route Geneve tunnel traffic through the management NIC with the
|
|
# wrong source IP. This causes remote OVS nodes to drop incoming tunnel packets
|
|
# because the source IP doesn't match the configured tunnel remote_ip.
|
|
# Fix: lower the route metric on the data NIC so it's preferred.
|
|
DATA_IFACE=$(ip -o -4 addr show | awk -v ip="$ENCAP_IP" '$0 ~ ip"/" {print $2}')
|
|
if [ -n "$DATA_IFACE" ]; then
|
|
SUBNET=$(ip -o -4 route show dev "$DATA_IFACE" proto kernel scope link | awk '{print $1}' | head -1)
|
|
if [ -n "$SUBNET" ]; then
|
|
sudo ip route replace "$SUBNET" dev "$DATA_IFACE" src "$ENCAP_IP" metric 50
|
|
echo " data route: $SUBNET via $DATA_IFACE src $ENCAP_IP (metric 50)"
|
|
else
|
|
echo " skipped: no kernel route found for $DATA_IFACE"
|
|
fi
|
|
else
|
|
echo " skipped: could not find interface for $ENCAP_IP"
|
|
fi
|
|
|
|
# --- Step 7: Verify Geneve kernel support ---
|
|
echo ""
|
|
echo "Step 7: Verifying Geneve kernel module..."
|
|
|
|
if sudo modprobe geneve 2>/dev/null; then
|
|
echo " geneve module: loaded"
|
|
else
|
|
echo " WARNING: geneve module not available (tunnels may not work)"
|
|
fi
|
|
|
|
# --- Step 8: Grant non-root access to OVS/OVN ---
|
|
echo ""
|
|
echo "Step 8: Configuring non-root access..."
|
|
|
|
# Open OVS DB socket so non-root processes can use ovs-vsctl
|
|
OVS_SOCK="/var/run/openvswitch/db.sock"
|
|
if [ -S "$OVS_SOCK" ]; then
|
|
sudo chmod 0666 "$OVS_SOCK"
|
|
echo " OVS DB socket: opened ($OVS_SOCK)"
|
|
fi
|
|
|
|
# Open OVN runtime directory and ctl sockets for ovs-appctl access
|
|
if [ -d "/var/run/ovn" ]; then
|
|
sudo chmod 0755 /var/run/ovn
|
|
sudo chmod 0666 /var/run/ovn/*.ctl 2>/dev/null || true
|
|
echo " OVN ctl sockets: opened (/var/run/ovn/)"
|
|
fi
|
|
if [ -d "/var/run/openvswitch" ]; then
|
|
sudo chmod 0666 /var/run/openvswitch/*.ctl 2>/dev/null || true
|
|
fi
|
|
|
|
# Create persistent systemd override so permissions survive OVS restarts
|
|
OVERRIDE_DIR="/etc/systemd/system/openvswitch-switch.service.d"
|
|
if [ ! -f "$OVERRIDE_DIR/spinifex-perms.conf" ]; then
|
|
sudo mkdir -p "$OVERRIDE_DIR"
|
|
sudo tee "$OVERRIDE_DIR/spinifex-perms.conf" >/dev/null <<'OVERRIDE'
|
|
[Service]
|
|
ExecStartPost=/bin/chmod 0666 /var/run/openvswitch/db.sock
|
|
OVERRIDE
|
|
sudo systemctl daemon-reload
|
|
echo " systemd override: created (db.sock permissions persist across restarts)"
|
|
else
|
|
echo " systemd override: already exists"
|
|
fi
|
|
|
|
# Sudoers rules for spinifex-daemon and spinifex-vpcd are managed by setup.sh
|
|
# (install_sudoers). Skip writing here to avoid conflicts.
|
|
SUDOERS_FILE="/etc/sudoers.d/spinifex-network"
|
|
if [ -f "$SUDOERS_FILE" ]; then
|
|
echo " sudoers rule: already exists ($SUDOERS_FILE, managed by setup.sh)"
|
|
else
|
|
echo " sudoers rule: not found — run setup.sh first, or install manually"
|
|
fi
|
|
|
|
# --- Step 9: Configure OVN log rotation ---
|
|
# The ovn-common package provides /etc/logrotate.d/ovn-common which handles
|
|
# rotation and vlog/reopen. We just add maxsize + rotate to cap disk usage.
|
|
echo ""
|
|
echo "Step 9: Configuring OVN log rotation..."
|
|
|
|
OVN_LOGROTATE="/etc/logrotate.d/ovn-common"
|
|
if [ -f "$OVN_LOGROTATE" ]; then
|
|
if ! grep -q 'maxsize' "$OVN_LOGROTATE"; then
|
|
sudo sed -i '/^\/var\/log\/ovn\/\*\.log {/a\ rotate 5\n maxsize 100M' "$OVN_LOGROTATE"
|
|
echo " added maxsize 100M + rotate 5 to $OVN_LOGROTATE"
|
|
else
|
|
echo " $OVN_LOGROTATE already has maxsize configured"
|
|
fi
|
|
else
|
|
echo " WARNING: $OVN_LOGROTATE not found — install ovn-common package"
|
|
fi
|
|
|
|
# Remove our old custom config if present (superseded by patching ovn-common)
|
|
if [ -f /etc/logrotate.d/ovn-spinifex ]; then
|
|
sudo rm -f /etc/logrotate.d/ovn-spinifex
|
|
echo " removed obsolete /etc/logrotate.d/ovn-spinifex"
|
|
fi
|
|
|
|
# --- Step 10: Enable auto-start on boot ---
|
|
# OVN services should start with the system in production. ovn-controller
|
|
# retries when the SB DB isn't ready; file log level is set to WARN (Step 5)
|
|
# to prevent log spam during those retries.
|
|
echo ""
|
|
echo "Step 10: Enabling OVN auto-start on boot..."
|
|
sudo systemctl enable openvswitch-switch 2>/dev/null || true
|
|
sudo systemctl enable ovn-controller 2>/dev/null || true
|
|
# ovs-monitor-ipsec drives strongSwan from OVS DB cert pointers. The daemon's
|
|
# enableOVNIPSec() flips ipsec_encapsulation=true at runtime and silently drops
|
|
# tunnel traffic if this unit isn't already up — enable at provision time so
|
|
# daemon never needs systemd-write capability (only is-active read).
|
|
sudo systemctl enable openvswitch-ipsec.service 2>/dev/null || true
|
|
# When openvswitch-ipsec is installed before strongswan-starter, the deb
|
|
# post-install starts the service against a missing /usr/sbin/ipsec and
|
|
# leaves it in 'failed' state. Clear the failure and restart unconditionally
|
|
# now that strongswan-starter is present.
|
|
sudo systemctl reset-failed openvswitch-ipsec.service 2>/dev/null || true
|
|
sudo systemctl restart openvswitch-ipsec.service 2>/dev/null || true
|
|
echo " openvswitch-switch: enabled on boot"
|
|
echo " ovn-controller: enabled on boot"
|
|
echo " openvswitch-ipsec: enabled on boot"
|
|
|
|
# --- Step 11: Health check ---
|
|
echo ""
|
|
echo "Step 11: Verifying setup..."
|
|
|
|
OK=true
|
|
|
|
# Check br-int
|
|
if sudo ovs-vsctl br-exists br-int; then
|
|
echo " br-int: OK"
|
|
else
|
|
echo " br-int: FAILED"
|
|
OK=false
|
|
fi
|
|
|
|
# Check WAN bridge (only if configured)
|
|
if [ -n "$WAN_BRIDGE" ]; then
|
|
if sudo ovs-vsctl br-exists "$WAN_BRIDGE"; then
|
|
echo " $WAN_BRIDGE:$(printf '%*s' $((15 - ${#WAN_BRIDGE})) '') OK"
|
|
if [ "$WAN_BRIDGE_MODE" = "veth" ]; then
|
|
if ip link show veth-wan-br >/dev/null 2>&1 && ip link show veth-wan-ovs >/dev/null 2>&1; then
|
|
echo " veth pair: OK (veth-wan-br ↔ veth-wan-ovs)"
|
|
echo " linux bridge: $LINUX_BRIDGE (untouched)"
|
|
else
|
|
echo " veth pair: FAILED (veth-wan-br/veth-wan-ovs not found)"
|
|
OK=false
|
|
fi
|
|
elif [ "$WAN_BRIDGE_MODE" = "direct" ]; then
|
|
if sudo ovs-vsctl port-to-br "$WAN_IFACE" >/dev/null 2>&1; then
|
|
echo " direct bridge: OK ($WAN_IFACE on $WAN_BRIDGE)"
|
|
else
|
|
echo " direct bridge: FAILED ($WAN_IFACE not on $WAN_BRIDGE)"
|
|
OK=false
|
|
fi
|
|
fi
|
|
else
|
|
echo " $WAN_BRIDGE:$(printf '%*s' $((15 - ${#WAN_BRIDGE})) '') FAILED"
|
|
OK=false
|
|
fi
|
|
fi
|
|
|
|
# Check mgmt bridge (only if enabled)
|
|
if [ "$MGMT_BRIDGE_ENABLED" = true ]; then
|
|
if sudo ovs-vsctl br-exists "$MGMT_BRIDGE"; then
|
|
MGMT_IP_ACTUAL=$(ip -4 -o addr show dev "$MGMT_BRIDGE" 2>/dev/null | awk '{print $4}' | head -1)
|
|
echo " $MGMT_BRIDGE:$(printf '%*s' $((15 - ${#MGMT_BRIDGE})) '') OK (${MGMT_IP_ACTUAL:-no IP})"
|
|
else
|
|
echo " $MGMT_BRIDGE:$(printf '%*s' $((15 - ${#MGMT_BRIDGE})) '') FAILED"
|
|
OK=false
|
|
fi
|
|
fi
|
|
|
|
# Check ovn-controller
|
|
if sudo ovs-appctl -t ovn-controller version >/dev/null 2>&1 || systemctl is-active --quiet ovn-controller 2>/dev/null; then
|
|
echo " ovn-controller: OK"
|
|
else
|
|
echo " ovn-controller: FAILED (may still be starting)"
|
|
OK=false
|
|
fi
|
|
|
|
# Check chassis registration (may take a moment)
|
|
if [ "$MANAGEMENT" = true ]; then
|
|
sleep 2
|
|
CHASSIS_COUNT=$(sudo ovn-sbctl show 2>/dev/null | grep -c "Chassis" || true)
|
|
echo " chassis count: $CHASSIS_COUNT"
|
|
fi
|
|
|
|
echo ""
|
|
if [ "$OK" = true ]; then
|
|
echo "=== OVN compute node setup complete ==="
|
|
else
|
|
echo "=== Setup completed with warnings (check above) ==="
|
|
fi
|