mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-22 20:26:44 +00:00
Ben Duncan
18853cef31
* fix: stop the e2e analyser inventing failures and let a detach outlast its seal go-junit-report emits <error message="No test result found"> for a === RUN with no matching result line, and attaches the test's own captured log as the body. The analyser counted those as failures, so the baremetal cell reported 25 failures against a junit file recording 1, with log output reading as assertions. Separate the marker from a real error in both the parse and the roll-up, count the unresolved cases and say so in the summary. The gateway gave a detach 30s while the daemon budgets 180s for the ebs.unmount seal and 180s more for the QMP unplug chain, so any detach whose seal replayed a WAL was reported as ServerInternal while it went on to succeed. Also switch four nightly job gates from always() to !cancelled(): always() overrides cancellation, so a cancelled run kept starting jobs. * fix: serialise the e2e workflows on one group and retry a dropped libvirt e2e.yml had no concurrency block at all, so every push to dev could provision alongside every other push and alongside the nightly. All four workflows that build on these hypervisors now share e2e-hypervisors, queued rather than cancelled. A per-environment group is not expressible: GitHub picks the group before it picks a runner, and the environment is a property of the runner. tofu apply also failed outright on a transient libvirt connect, which fails a 45-minute job in 90 seconds and reports it as a test failure. retry_run retries only when that attempt's own output names a connection failure, so a real failure still fails once. Also collect the unfiltered journal from the matrix cells and the node journal from cell-21: the unit filter drops the kernel and OOM lines that explain why one node behaved unlike its siblings, and a passing run's journal is what makes a failing one readable. * fix: build the baremetal junit from the unfiltered suite log run-baremetal-e2e.sh streams the full suite output to suite-output.log and a grep-filtered summary to its stdout, which the workflow tees into test-baremetal.log. That filter anchors --- PASS at column 0 and Go indents every subtest result by four spaces, so the junit was generated from a log with no subtest results in it: go-junit-report saw each === RUN with no outcome and emitted <error message="No test result found">. 17 of cell-28's 39 testcases and 93 of cell-20's 120 were that. Regenerating cell-28 from suite-output.log gives 39 tests, 0 failures, 0 errors. * fix: converge released EIPs instead of trusting a fire-and-forget teardown A disassociate leaves the ENI running, so the orphan sweep's owning-port test never fires for it. The teardown then rests entirely on vpc.delete-nat, which is core NATS and is lost whenever vpcd is restarting — and the intent KV watch is UpdatesOnly, so the same window hides the write that would have driven a repair pass. The dnat_and_snat row and its host /32 route to a released public address survived until something else happened to touch them, which for a live ENI was nothing at all. Give the sweep the second test it was missing: AddEIP is the only writer of dnat_and_snat, so the floating IPs intent asks for are the complete set of addresses that may hold one, and a row for any other address is stale however alive its port. Ports and external IPs travel together in LiveEIPs, both unioned from the start-of-pass snapshot and the fresh re-read, so a mid-pass launch is still spared. The host unbind now runs even when the row had already gone, which is the state a crash between the OVN delete and the unbind leaves. Run that sweep on the startup pass too. Startup is the pass that follows the blind window, so skipping it deferred repair of exactly the changes that were missed. The port-group and ENI-port sweeps stay gated there for the in-flight create they were written for; the EIP sweep re-reads intent immediately before deciding and abandons the whole sweep if that read fails, which is the same protection by a stronger route. * fix: keep a release verify off the hypervisors an e2e run is using release.yml is the fifth workflow that provisions on the ci-single pool and had no concurrency block at all, so a tag push could land a tofu apply on the same libvirt host a nightly cell was mid-provision on. The group goes on the verify job rather than the workflow: the build jobs touch no hypervisor and should not queue behind a nightly. * fix: stop cell-27 handing a 50-minute suite a 50-minute job The rds suite is budgeted 50m in suite-sets.sh and cell-27 took the matrix default of 50 minutes for the whole job, so provisioning, install, the suite and teardown had to fit inside the suite's allowance alone. It never could: the last measured run spent 6 minutes reaching the suite and was killed 44 minutes into it, mid-TestAutomatedBackups. A job timeout reports "The operation was canceled" and nothing else, which is why this cell has no verdict in any nightly rather than a failure anyone could read. cell-27 gets 75 minutes, and the select job now refuses to start a run whose job budget does not clear its suite budget plus a setup allowance. The inner timeout firing first is the property that matters: go test says where it stopped and what failed, and the job timeout says nothing at all. cell-29 already had the same fix applied by hand; nothing stopped the next suite from repeating it. * fix: converge host EIP plumbing against intent, not against the NAT row The released-EIP sweep landed and did not fire. Its premise was that a stranded dnat_and_snat row is what a stranded host route can be found by, and on the path that actually strands one there is no row left. AddEIP scrubs the predecessor row sharing the private IP before installing the new one, so when reconcile re-added the instance's auto-assigned address it silently deleted the released EIP's row — and applyEIPs runs ahead of the sweep, which then walked a table with nothing stale in it while the /32 route and its proxy-ARP stayed up. Give the sweep the host's own inventory. ListEIPIngress reads the EIPs back from the FORWARD accepts EnsureEIPIngress stamps with its own comment, so a binding is found by what installed it rather than by a row some other path is free to delete. Anything plumbed that intent no longer asks for is torn down, which also covers a crash between the OVN delete and the unbind. A failed inventory fails the pass: an empty list and an unreadable one are indistinguishable, and reading the second as the first is a sweep that reports success having done nothing. Close the window inside the pass too. The predecessor scrub now reads the row it is about to drop and releases that address's host state, so the strand does not exist between applyEIPs and the sweep rather than merely being repaired a step later. * fix: retry the release verify's libvirt calls like every other job does The verify job drives the same libvirt provider on the same hypervisors as the e2e cells, where a dropped connection under concurrent load is the steady state and is retried. Here it was a hard failure that reads as a broken release. It was skipped earlier only because the job checks out mulga and not spinifex, so the shared helpers were not on disk — a sparse checkout of .github/scripts costs nothing and makes apply and destroy behave like their e2e counterparts. * fix: do not report a rebooting DB instance available on the pre-reboot agent's health RegisterDBInstance stamped a fresh LastSeen while leaving Agent.EngineHealth at the value the previous agent process reported. After a reboot the new agent registers before it has probed anything, so the record read as a healthy engine with a beat newer than the transition, and the reconciler moved the instance to available while PostgreSQL was still starting up. A client that connects the moment the status turns green then gets "the database system is starting up". A register now discards the previous process's verdict and records when this agent process started. The restart reconciler requires that registration to be newer than the transition, which also closes the window where a beat lands between the engine being stopped and the VM going down. * test: record the credential kubectl sent when an EKS call comes back Unauthorized The IRSA pod subtest's first kubectl is the gateway-CA configmap, which lands before the pod dumps are registered, so a 401 there left no evidence at all. A verbose read-only probe reports whether an Authorization header was sent, which separates a token the apiserver rejected from one the exec plugin never made. * fix: report a starting engine promptly, and budget CI jobs from the suite The agent waited a full heartbeat interval before its first beat, so a restart could not be observed as finished for up to 30 seconds after the engine was already serving. Beat at startup instead, and report every 5 seconds until the engine has answered once — the control plane is actively waiting on that beat, and the steady-state cadence it hands back is for a database already serving. The rds suite is the one most sensitive to what else the hypervisor is doing: its DB VMs serialise behind a 4 GiB semaphore, so its wall clock is set by how long it waits for the budget. The same pass ran 45m beside four nightly cells and overran 50m beside nine, panicking with two tests still running. Raise its budget to 60m. That budget was then larger than the jobs meant to contain it. A job cancelled on timeout reports only "The operation was canceled" and takes the artifacts with it, so the inner `go test` timeout must always fire first — and it could not for rds on e2e.yml, nor for storagefault or diskperf, which have asked for 90m and 180m inside a 60m job since they were added. Both workflows now resolve their job budget from suite-sets.sh rather than carrying a literal: e2e.yml from the largest requested suite, e2e-suites.yml per matrix leg, so a leg is bounded by its own suite and not by the longest one beside it. The default push set resolves to exactly the timeouts both workflows had before. * fix: check a permutation cell's job budget against the suites it runs The guard only saw cells that name a suite, so the nine that run a topology's nightly subset were never checked against it — the same class of mistake the guard exists to catch, in the majority of the cells. Bound each by the longest suite in its subset: max() and not sum(), because whichever suite hangs must panic on its own timeout first, and a sum would demand a budget the set has never come close to using. Every cell clears it today. * fix: report why a PostgreSQL engine would not start, and stop failing a stop that landed Three defects, all found by the first rds pass that ever ran deep enough to reach them. A wait that saw an instance reach `failed` called t.Fatalf from inside the polling condition, and testify runs that condition on its own goroutine. The Goexit killed the tick and left the collector empty, which reads as the condition being satisfied — so the wait returned successfully on an instance it had just declared broken, logged "reached status available" about one that was failed, and let the test carry on against it. Six conditions across four suites call Fatal or require the same way. EventuallyErr now runs its condition on the test's goroutine, which makes all six behave as written. A DB VM stop has two drivers: the API call and the reconciler resuming one whose caller it assumes has died. When they overlap the loser is told the VM is not in a state to be stopped — which is the state the stop was heading for — and the customer's StopDBInstance returned InvalidDBInstanceState for a stop that had just completed. Both paths now treat a refused command the way they already treat an unanswered one: it says nothing about the VM, so the fleet view settles it. PostgreSQL had no equivalent of the engine log tail MariaDB has carried since it was added, so a postmaster that refuses a setting produced "engine did not respond on /run/postgresql:5432" and nothing else — on a guest with no SSH, whose console records only that pg_ctl could not start the server. The probe now quotes the tail of the log the image already directs the postmaster to, and the reboot and modify paths carry the agent's reason into the failure the way the create path always has. The reason reaches the customer through StatusInfos. The rds suite's budget goes to 90m and cell-27's job to 100m. Its wall clock is what the DB-VM queue costs rather than what the tests do — single tests logged 11m, 22m and 26m waiting for budget — and the pass above still had three of seventeen tests running at 60m. * fix: keep a DB VM recoverable when its agent cannot start, and flush the volume before a snapshot An rds-agent that failed to construct exited, so a transient IMDS credential resolution took the guest down for good: rds-datadir and rds-init cascade on the missing handoff, the engine never starts, and the control plane sees only silence until it declares the instance failed ten minutes later. Construction is retried like every other boot step instead. OpenRC skips start_post when the start itself fails, which is the one case with no diagnostic at all — the console carried nothing but "died". The log mirror moves out of the handoff wait so a failed start uses it too. A snapshot quiesced the engine and nothing else. The engine repairs its own files from the WAL, but postgresql.conf sits beside them and it does not: a restore came up on a torn tail and the postmaster stopped on a syntax error at the unterminated include hook. The quiesce now flushes the whole data mount, and the hook is renamed into place rather than appended, so a boot that finds a half written one replaces it instead of appending after its open quote. * fix: flush the config cloud-init wrote before a reset can take it A DB instance rebooted seconds after it went available came back with no RDS_GATEWAY_URL, so rds-agent could not reach the control plane and the engine never started. cloud-init writes agent.env once, per-instance, and never again; a reboot is a QMP system_reset with no guest shutdown, so the file was still dirty page cache when the machine reset under it and the next boot read nothing. The handoff wait now syncs, which is the point at which the agent has proved it read that file. * fix: stop dropping an EIP teardown published while vpcd is restarting DisassociateAddress publishes vpc.delete-nat fire-and-forget. On run 34046316024 vpcd disconnected from NATS at 03:51:26.73 and its replacement subscribed at 03:51:27.09; the publish landed at 03:51:26.92, in the gap, and went nowhere. ReleaseAddress then returned the address to the pool two minutes later with its /32 host route still delivering to the guest that had held it. vpc.delete-nat now uses request-reply like vpc.add-nat, and retries only on no-responders — which returns immediately, so the cost is paid solely when nothing is listening. A teardown that still fails is logged as an error naming the address rather than lost silently. Neither is fatal to the caller: the reconciler's orphan sweep remains the backstop. vpc.add-nat on the EIP path stays fire-and-forget. The shared helper blocks it on the flows barrier for up to 45s, and associating an address should not inherit that. Two reconcile passes in that run had the address absent from intent and did not sweep its host route, and the journal cannot say why: the sweep logged only when it acted, so a route it kept was indistinguishable from one it never saw. It now logs the bindings it found, kept and wanted. * ci: render one run-level table for the e2e nightly Reading a nightly meant opening nineteen jobs, and the Actions UI does not separate a cell that failed from one cancelled out from under it — a distinction every investigation of this suite has needed, and one the run 34046316024 analysis had to reach for the jobs API to get. A final job, needs: every cell and if: always(), renders cell, topology, result, duration, runner and per-cell test counts into the step summary, with run-level totals, the three slowest cells and the failing test names. Result, duration and runner come from the jobs API so a cell that died before writing junit still gets a row. Counts come from a new junit-only artifact per cell rather than the full cell artifact, so the roll-up does not pull nineteen journals it has no use for. Verified against run 34046316024: 14 success, 2 cancelled, 1 failure, with the two cancellations shown as cancelled rather than folded into failure. * fix: assert EC2's actual EIP semantics, and probe EKS auth on an authenticated path natuplink asserted that an instance's auto-assigned public IP is still plumbed after an EIP associated to the same instance is torn down. EC2 does the opposite: associating an EIP releases the auto-assigned address back into the pool, and it cannot be reused. Our datapath already does that — run 34059879666 shows 192.168.0.72's ingress removed at 07:09:44.000, 36ms before .73's was installed — so the test was asserting behaviour neither AWS nor we have. It now asserts the release at the point it happens, and that no public delivery remains after the teardown. This surfaced only once the teardown itself started working: the run's other assertions passed, including .73's removal, which was the failure before. Our records still disagree with our datapath — the ENI keeps the released address, which is why termination tears the old one down twice and never the current one. That is the remaining half of mulga-7zc9w and is not fixed here; it needs an IPAM release on the associate path. Separately, AuthDiagnostics read /version, which is anonymously readable, so its 200 was consistent with both branches it claimed to distinguish. It now runs auth whoami, reads kube-system, and invokes the credential plugin directly, reporting exit code, stderr and whether a token was produced — never the token, since CI logs outlive it. * test: capture per-guest state when a spread guest never answers SSH TestMultinodeSpread's only failure dump is dumpPlacementNATDiag, which collects OVN, OVS, ARP and route state aimed at the NAT and EIP half of the test. The failure it actually hits is a guest that never accepted SSH — run 34040324968, the guest on node3 at 10.100.2.5 — and for that it recorded no console, no port binding and no tap state. There was no way to tell from the artifact whether the guest booted at all. Now dumps, per guest: the console, the NB logical switch port, the SB port binding, the OVS interface backing its tap, and br-int's port list. Probed on every node rather than the expected one, because a port bound on the wrong chassis is exactly what a hosting-node-only dump cannot show. Covers all three guests, not just the failing one, so a working guest is available as the control. * ci: sample hypervisor load either side of every cell Eight runner names map onto three hypervisors, so cells that never share a runner still share a host: when cell 10's SSH wait expired on run 34040324968, cells 22, 17, 18 and 28 were concurrently live, two of them multi-node. Nothing in the artifacts measured host load, which left co-tenancy as an explanation that could be neither confirmed nor ruled out. Records loadavg, MemAvailable, SwapFree, the cpu line carrying steal, and the QEMU process count before and after each cell, into the cell artifact. * ci: note that main's missing concurrency block is why the nightly runs ungrouped Three refs carry three different groupings: main has no concurrency block at all, dev uses e2e-nightly, this branch uses e2e-hypervisors. Scheduled runs load the workflow from the default branch, so every cron nightly runs ungrouped and cannot queue against anything — which is how a dispatch of 34050630627 ran alongside the scheduled 34046316024 and cost it cells 24 and 27. e2e-hypervisors is the right group and deliberately broader than dev's, since e2e.yml, e2e-suites.yml and e2e-ddil.yml draw on the same runner pools. Nothing on a feature branch can fix this; the block has to reach main.
942 lines
40 KiB
YAML
942 lines
40 KiB
YAML
# E2E per-suite blocks. Each suite appears as its own node in the Actions
|
|
# graph:
|
|
#
|
|
# single_provision ─┬─ single_suite (matrix: the single-node-eligible suites)
|
|
# └─ single_teardown (if: always)
|
|
# multi_provision ─┬─ multi_suite (matrix: the multi-node-eligible suites)
|
|
# └─ multi_teardown (if: always)
|
|
#
|
|
# Both matrices come from .github/scripts/suite-sets.sh, the one definition of
|
|
# which suites a topology can run, shared with e2e.yml and e2e-nightly.yml.
|
|
#
|
|
# Constraint: tofu state is runner-filesystem-local, so *_provision and
|
|
# *_teardown must execute on the same self-hosted runner (one runner per label
|
|
# today). Teardown reuses the persisted mulga/ tofu-cluster workspace and does
|
|
# NOT re-checkout mulga (that would wipe local state). Suite-matrix legs reach
|
|
# the already-provisioned VM over its WAN IP using the key path the provision
|
|
# job emits; they share the runner home dir, so the key file persists.
|
|
#
|
|
# This file does NOT post the gating `e2e` commit status — it runs alongside
|
|
# e2e.yml for validation. Once green across a few manual runs, fold the
|
|
# triggers from e2e.yml here and retire the loop.
|
|
|
|
name: E2E (suite blocks)
|
|
|
|
on:
|
|
workflow_dispatch:
|
|
inputs:
|
|
single_suites:
|
|
description: "Single-node suites to run as matrix legs (empty = every single-node-eligible suite, per .github/scripts/suite-sets.sh)"
|
|
required: false
|
|
default: ""
|
|
multi_suites:
|
|
description: "Multi-node suites to run as matrix legs (empty = every multi-node-eligible suite, per .github/scripts/suite-sets.sh)"
|
|
required: false
|
|
default: ""
|
|
run_multinode:
|
|
description: "Also run the multinode env block"
|
|
type: boolean
|
|
required: false
|
|
default: true
|
|
test_run:
|
|
description: "Optional -test.run regex (empty = all tests in suite)"
|
|
required: false
|
|
default: ""
|
|
|
|
# Shared with e2e-nightly.yml, e2e-suites.yml and e2e-ddil.yml: every one of
|
|
# them provisions on the same runner pools and the same hypervisors, so two in
|
|
# flight compete for their disks and their libvirt guests. Queued rather than
|
|
# cancelled — a run in progress is someone's result, not a stale one.
|
|
concurrency:
|
|
group: e2e-hypervisors
|
|
cancel-in-progress: false
|
|
|
|
permissions:
|
|
contents: read
|
|
# actions: read lets the otel-job-id action look up a provision job's numeric
|
|
# id via the Actions API — github.job is only the YAML key, no context
|
|
# exposes it.
|
|
actions: read
|
|
|
|
env:
|
|
GIT_BRANCH: ${{ github.ref_name }}
|
|
TEST_RUN: ${{ inputs.test_run || '' }}
|
|
# OTLP export to the central Elastic sink (wattle). Repo variable overrides;
|
|
# empty string disables telemetry entirely.
|
|
SPINIFEX_OTLP_ENDPOINT: ${{ vars.SPINIFEX_OTLP_ENDPOINT || 'http://192.168.1.13:8200' }}
|
|
SPINIFEX_OTEL_ATTRS: ci.run_id=${{ github.run_id }},ci.workflow=${{ github.workflow }}
|
|
|
|
jobs:
|
|
# ---------------------------------------------------------------------------
|
|
# Single-node env
|
|
# ---------------------------------------------------------------------------
|
|
single_provision:
|
|
name: Single env · provision
|
|
runs-on: [self-hosted, ci-single]
|
|
timeout-minutes: 40
|
|
outputs:
|
|
wan_ip: ${{ steps.vm.outputs.wan_ip }}
|
|
ssh_key: ${{ steps.vm.outputs.ssh_key }}
|
|
suites: ${{ steps.suites.outputs.list }}
|
|
matrix: ${{ steps.suites.outputs.matrix }}
|
|
env:
|
|
TOFU_LOG: /tmp/e2e-tofu-single-${{ github.run_id }}.log
|
|
# This job (not single_suite) is where "Bootstrap via Binary Install"
|
|
# bakes SPINIFEX_OTEL_ATTRS into the VM's telemetry.env, before the
|
|
# suite matrix even exists — single_suite's legs share this one
|
|
# already-booted VM, so daemon telemetry can't be scoped any finer
|
|
# than "single env" per suite leg. ci.cell=single distinguishes it
|
|
# from multi_provision's VMs within the same run id.
|
|
SPINIFEX_OTEL_ATTRS: ci.run_id=${{ github.run_id }},ci.workflow=${{ github.workflow }},ci.cell=single
|
|
steps:
|
|
- name: Reap Orphan Procs
|
|
run: |
|
|
set +e
|
|
UID_SELF=$(id -u)
|
|
WS="${GITHUB_WORKSPACE}"
|
|
reap() {
|
|
local sig="$1"
|
|
for pid in $(pgrep -u "$UID_SELF" -x tofu) $(pgrep -u "$UID_SELF" -x terraform); do
|
|
cwd=$(readlink "/proc/$pid/cwd" 2>/dev/null) || continue
|
|
case "$cwd" in
|
|
"$WS"|"$WS"/*) echo "reap $sig pid=$pid cwd=$cwd"; kill "-$sig" "$pid" 2>/dev/null ;;
|
|
esac
|
|
done
|
|
}
|
|
reap TERM; sleep 3; reap KILL
|
|
find "$WS" -name '.terraform.tfstate.lock.info' -delete 2>/dev/null
|
|
true
|
|
|
|
- name: Clean Workspace
|
|
run: |
|
|
awk -v w="$GITHUB_WORKSPACE" '$2 ~ "^"w {print $2}' /proc/mounts \
|
|
| sort -r | xargs -r -I{} sudo umount -l -R {} || true
|
|
sudo rm -rf --one-file-system "$GITHUB_WORKSPACE"/*
|
|
|
|
- uses: actions/create-github-app-token@v3
|
|
id: app-token
|
|
with:
|
|
client-id: ${{ secrets.APP_ID }}
|
|
private-key: ${{ secrets.APP_PRIVATE_KEY }}
|
|
repositories: mulga
|
|
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
repository: mulgadc/mulga
|
|
token: ${{ steps.app-token.outputs.token }}
|
|
sparse-checkout: scripts/tofu-cluster
|
|
path: mulga
|
|
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
path: spinifex
|
|
|
|
- uses: actions/setup-go@v7
|
|
with:
|
|
go-version-file: spinifex/go.mod
|
|
cache: false
|
|
|
|
- name: Re-enable Go toolchain auto-download
|
|
run: echo "GOTOOLCHAIN=auto" >> "$GITHUB_ENV"
|
|
|
|
# Default and allow-list both come from the shared definition, so this
|
|
# workflow cannot drift from e2e.yml about what a single node can run.
|
|
- name: Compute suite matrix
|
|
id: suites
|
|
env:
|
|
REQUESTED: ${{ inputs.single_suites }}
|
|
run: |
|
|
set -euo pipefail
|
|
. "${GITHUB_WORKSPACE}/spinifex/.github/scripts/suite-sets.sh"
|
|
LIST="${REQUESTED:-${E2E_SUITES_SINGLE}}"
|
|
e2e_suites_assert_subset "single_suites" "${LIST}" "${E2E_SUITES_SINGLE}"
|
|
echo "list=${LIST}" >> "$GITHUB_OUTPUT"
|
|
# 45 is the floor this job has always had, so resolving each leg's
|
|
# budget can only raise it — storagefault and rds ask for more.
|
|
JSON=$(e2e_suite_matrix "${LIST}" 45)
|
|
echo "matrix=${JSON}" >> "$GITHUB_OUTPUT"
|
|
|
|
- name: Reclaim docker build cache
|
|
run: |
|
|
docker container prune -f || true
|
|
docker image prune -f || true
|
|
docker buildx prune -af --filter "until=24h" || true
|
|
docker system df || true
|
|
|
|
# ci.job_id names the provision job, not the suite job that later drives
|
|
# the env: the suite legs share this env and its baked telemetry.env, so
|
|
# the provisioner is the only job the daemon telemetry can belong to.
|
|
- name: Resolve CI job id
|
|
uses: ./spinifex/.github/actions/otel-job-id
|
|
with:
|
|
job-name: Single env · provision
|
|
|
|
- name: Build Install Artifacts
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
./build-install-artifacts.sh "${GIT_BRANCH}" \
|
|
"${RUNNER_TEMP}/spinifex-distro.tar.gz" \
|
|
"${RUNNER_TEMP}/setup.sh" \
|
|
"${RUNNER_TEMP}/spinifex-tests.tar"
|
|
|
|
- name: Provision VM
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
export TF_VAR_git_branch="${GIT_BRANCH}"
|
|
quiet_run "tofu init" "$TOFU_LOG" tofu init -input=false
|
|
quiet_run "tofu workspace select" "$TOFU_LOG" tofu workspace select -or-create "${SPINIFEX_CI_ENV}"
|
|
quiet_run "tofu destroy (pre-clean)" "$TOFU_LOG" tofu destroy -var-file=envs/${SPINIFEX_CI_ENV}.tfvars -auto-approve -input=false || true
|
|
quiet_run "scrub-env (pre-clean)" "$TOFU_LOG" ./scrub-env.sh "${SPINIFEX_CI_ENV}" || true
|
|
retry_run "tofu apply" "$TOFU_LOG" tofu apply -var-file=envs/${SPINIFEX_CI_ENV}.tfvars -auto-approve -input=false
|
|
ok "VM provisioned"
|
|
|
|
- name: Bootstrap via Binary Install
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
SPX_EXTERNAL_POOL="${SPINIFEX_CI_POOL}" \
|
|
./bootstrap-install.sh "${SPINIFEX_CI_ENV}" \
|
|
"${RUNNER_TEMP}/setup.sh" \
|
|
"${RUNNER_TEMP}/spinifex-distro.tar.gz" \
|
|
--test-tar "${RUNNER_TEMP}/spinifex-tests.tar"
|
|
|
|
- name: Resolve VM SSH details
|
|
id: vm
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
INVENTORY=$(tofu output -json inventory)
|
|
WAN_IP=$(echo "$INVENTORY" | jq -r '.nodes[0].wan_ip')
|
|
SSH_KEY=$(echo "$INVENTORY" | jq -r '.ssh_key_path')
|
|
SSH_KEY="${SSH_KEY/#\~/$HOME}"
|
|
echo "wan_ip=${WAN_IP}" >> "$GITHUB_OUTPUT"
|
|
echo "ssh_key=${SSH_KEY}" >> "$GITHUB_OUTPUT"
|
|
|
|
- name: Build eks-node AMI (libguestfs, runner)
|
|
if: contains(steps.suites.outputs.list, 'eks')
|
|
working-directory: spinifex
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
banner "build eks-node AMI (libguestfs — no host devices)"
|
|
sudo apt-get update -qq
|
|
sudo apt-get install -y --no-install-recommends libguestfs-tools qemu-utils
|
|
export LIBGUESTFS_BACKEND=direct
|
|
sudo chmod 0644 /boot/vmlinuz-* || true
|
|
group_open "make build-eks-node-image"
|
|
make build-eks-node-image
|
|
group_close
|
|
ok "raw: $(du -h /tmp/eks-node-image-build/eks-node-alpine.raw | cut -f1)"
|
|
|
|
- name: Import eks-node AMI on VM
|
|
if: contains(steps.suites.outputs.list, 'eks')
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
eval "$(grep -E '^(ALPINE_VERSION|AMI_NAME|SYSTEM_TAG)=' \
|
|
spinifex/scripts/images/eks-node/manifest.conf)"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${{ steps.vm.outputs.ssh_key }}")
|
|
VM=tf-user@${{ steps.vm.outputs.wan_ip }}
|
|
banner "import eks-node AMI to VM image store"
|
|
scp "${SSH_OPTS[@]}" \
|
|
/tmp/eks-node-image-build/eks-node-alpine.raw \
|
|
"$VM":/tmp/eks-node-alpine.raw
|
|
ssh "${SSH_OPTS[@]}" "$VM" \
|
|
"spx admin images import --file /tmp/eks-node-alpine.raw \
|
|
--distro alpine --version ${ALPINE_VERSION} --arch x86_64 \
|
|
--boot-mode bios --ami-name ${AMI_NAME} --tag ${SYSTEM_TAG}" >/dev/null 2>&1
|
|
ok "eks-node AMI imported"
|
|
|
|
- name: Install kubectl on VM
|
|
if: contains(steps.suites.outputs.list, 'eks')
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${{ steps.vm.outputs.ssh_key }}")
|
|
VM=tf-user@${{ steps.vm.outputs.wan_ip }}
|
|
banner "install kubectl on VM (eks data-plane subtest)"
|
|
ssh "${SSH_OPTS[@]}" "$VM" 'bash -s' <<'EOF'
|
|
set -euo pipefail
|
|
KVER=v1.32.5
|
|
case "$(uname -m)" in
|
|
x86_64) ARCH=amd64 ;;
|
|
aarch64) ARCH=arm64 ;;
|
|
*) echo "unsupported arch $(uname -m)" >&2; exit 1 ;;
|
|
esac
|
|
cd /tmp
|
|
curl -fsSLO "https://dl.k8s.io/release/${KVER}/bin/linux/${ARCH}/kubectl"
|
|
curl -fsSLO "https://dl.k8s.io/release/${KVER}/bin/linux/${ARCH}/kubectl.sha256"
|
|
echo "$(cat kubectl.sha256) kubectl" | sha256sum -c -
|
|
sudo install -m 0755 kubectl /usr/local/bin/kubectl
|
|
kubectl version --client
|
|
EOF
|
|
ok "kubectl installed on VM"
|
|
|
|
- name: Build E2E test binaries on runner
|
|
working-directory: spinifex/tests/e2e
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
# teardown always builds: the run-scoped sweep binary runs in the
|
|
# teardown job, it is never a selectable suite leg.
|
|
SUITES_BUILD="${{ steps.suites.outputs.list }} teardown"
|
|
banner "build ${SUITES_BUILD// /, }"
|
|
group_open "go test -c"
|
|
make e2e-build SUITES_BUILD="${SUITES_BUILD}"
|
|
group_close
|
|
for f in _bin/*.test; do
|
|
ok "$(basename "$f") $(stat -c '%s' "$f" | numfmt --to=iec)"
|
|
done
|
|
|
|
- name: Ship test binaries to VM
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${{ steps.vm.outputs.ssh_key }}")
|
|
VM=tf-user@${{ steps.vm.outputs.wan_ip }}
|
|
ssh "${SSH_OPTS[@]}" "$VM" "rm -rf \$HOME/spinifex-e2e-bin && mkdir -p \$HOME/spinifex-e2e-bin"
|
|
tar -C spinifex/tests/e2e/_bin -cf - . | ssh "${SSH_OPTS[@]}" "$VM" "tar -xf - -C \$HOME/spinifex-e2e-bin"
|
|
ok "shipped binaries to $VM"
|
|
|
|
- name: Start packet capture on VM br-wan
|
|
run: |
|
|
set +e
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${{ steps.vm.outputs.ssh_key }}")
|
|
VM=tf-user@${{ steps.vm.outputs.wan_ip }}
|
|
scp "${SSH_OPTS[@]}" \
|
|
"${GITHUB_WORKSPACE}/spinifex/.github/scripts/start-net-capture.sh" \
|
|
"$VM":/tmp/start-net-capture.sh
|
|
ssh "${SSH_OPTS[@]}" "$VM" "bash /tmp/start-net-capture.sh" || true
|
|
|
|
- name: Upload tofu log
|
|
if: always()
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: tofu-log-single-${{ github.run_id }}
|
|
path: ${{ env.TOFU_LOG }}
|
|
if-no-files-found: ignore
|
|
retention-days: 14
|
|
|
|
single_suite:
|
|
name: Single env · ${{ matrix.suite }}
|
|
needs: single_provision
|
|
runs-on: [self-hosted, ci-single]
|
|
# Per leg, from suite-sets.sh: one number for every suite would have to be
|
|
# storagefault's, and every other leg would then hang for 105 minutes.
|
|
timeout-minutes: ${{ matrix.timeout }}
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
include: ${{ fromJSON(needs.single_provision.outputs.matrix) }}
|
|
env:
|
|
WAN_IP: ${{ needs.single_provision.outputs.wan_ip }}
|
|
SSH_KEY: ${{ needs.single_provision.outputs.ssh_key }}
|
|
ARTIFACT_DIR: /tmp/spinifex-e2e-single-${{ github.run_id }}-${{ matrix.suite }}
|
|
steps:
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
path: spinifex
|
|
|
|
- uses: actions/setup-go@v7
|
|
with:
|
|
go-version-file: spinifex/go.mod
|
|
cache: false
|
|
|
|
- name: Install go-junit-report
|
|
run: |
|
|
go install github.com/jstemmer/go-junit-report/v2@latest
|
|
echo "$HOME/go/bin" >> "$GITHUB_PATH"
|
|
|
|
- name: Run ${{ matrix.suite }}
|
|
id: e2e
|
|
run: |
|
|
set +e
|
|
SUITE="${{ matrix.suite }}"
|
|
. "${GITHUB_WORKSPACE}/spinifex/.github/scripts/suite-sets.sh"
|
|
TMO="$(e2e_suite_timeout "${SUITE}")"
|
|
VM_HOST="tf-user@${WAN_IP}"
|
|
TEST_RUN_FLAG=""
|
|
[ -n "${TEST_RUN}" ] && TEST_RUN_FLAG="-test.run=${TEST_RUN}"
|
|
cleanup_remote() {
|
|
ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "$SSH_KEY" "$VM_HOST" \
|
|
"pkill -u tf-user -TERM -f \"/spinifex-e2e-bin/${SUITE}\.test( |\$)\" 2>/dev/null; sleep 1; pkill -u tf-user -KILL -f \"/spinifex-e2e-bin/${SUITE}\.test( |\$)\" 2>/dev/null; true" \
|
|
2>/dev/null || true
|
|
}
|
|
trap cleanup_remote EXIT INT TERM
|
|
ssh -tt -o StrictHostKeyChecking=no -i "$SSH_KEY" "$VM_HOST" \
|
|
"set -u; mkdir -p '${ARTIFACT_DIR}'; cd \$HOME/spinifex-e2e-bin; \
|
|
R=\$'\033[0m' B=\$'\033[1m' C=\$'\033[36m' G=\$'\033[32m' RED=\$'\033[31m'; \
|
|
printf '\n%s%s━━ suite %s ━━%s\n' \"\$B\" \"\$C\" \"${SUITE}\" \"\$R\"; \
|
|
date -u +%Y-%m-%dT%H:%M:%SZ > '${ARTIFACT_DIR}/test-${SUITE}.start'; \
|
|
GITHUB_ACTIONS=true FORCE_COLOR=1 SPINIFEX_E2E=1 SPINIFEX_MODE=single \
|
|
SPINIFEX_E2E_RUN_ID='${{ github.run_id }}' \
|
|
ARTIFACT_DIR='${ARTIFACT_DIR}' \
|
|
./${SUITE}.test -test.v -test.timeout=${TMO} ${TEST_RUN_FLAG} \
|
|
2>&1 | tee '${ARTIFACT_DIR}/test-${SUITE}.log' \
|
|
| sed -uE 's/^[[:space:]]+([a-zA-Z0-9_]+_test\.go:[0-9]+: )?//'; \
|
|
exit \${PIPESTATUS[0]}"
|
|
echo "rc=$?" >> "$GITHUB_OUTPUT"
|
|
exit 0
|
|
|
|
- name: Collect suite artifacts from VM
|
|
if: always()
|
|
run: |
|
|
set +e
|
|
mkdir -p "${ARTIFACT_DIR}"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${SSH_KEY}")
|
|
VM=tf-user@${WAN_IP}
|
|
ssh "${SSH_OPTS[@]}" "$VM" "tar -C '${ARTIFACT_DIR}' -cf - . 2>/dev/null || true" \
|
|
| tar -C "${ARTIFACT_DIR}" -xf - 2>/dev/null
|
|
true
|
|
|
|
- name: Convert test log to JUnit XML
|
|
if: always()
|
|
run: |
|
|
shopt -s nullglob
|
|
for LOG in "${ARTIFACT_DIR}"/test-*.log; do
|
|
BASE=$(basename "$LOG" .log); SUITE=${BASE#test-}
|
|
go-junit-report -in "$LOG" -out "${ARTIFACT_DIR}/junit-${SUITE}.xml" || true
|
|
done
|
|
|
|
- name: Publish test summary
|
|
if: always()
|
|
uses: ./spinifex/.github/actions/junit-report
|
|
with:
|
|
junit-glob: ${{ env.ARTIFACT_DIR }}/junit-*.xml
|
|
title: "E2E ${{ matrix.suite }} results"
|
|
|
|
# Tolerated on failure: the sink being unreachable must not turn a
|
|
# green test run red.
|
|
- name: Ship test results to Elasticsearch
|
|
if: always()
|
|
continue-on-error: true
|
|
uses: ./spinifex/.github/actions/junit-to-es
|
|
with:
|
|
junit-glob: ${{ env.ARTIFACT_DIR }}/junit-*.xml
|
|
cell: single
|
|
|
|
- name: Analyze e2e failures
|
|
if: always()
|
|
uses: ./spinifex/.github/actions/e2e-analyze
|
|
with:
|
|
junit-glob: ${{ env.ARTIFACT_DIR }}/junit-*.xml
|
|
log-dir: ${{ env.ARTIFACT_DIR }}
|
|
title: "E2E ${{ matrix.suite }} failure analysis"
|
|
|
|
- uses: actions/upload-artifact@v7
|
|
if: always()
|
|
with:
|
|
name: e2e-single-${{ matrix.suite }}-${{ github.run_id }}
|
|
path: ${{ env.ARTIFACT_DIR }}
|
|
if-no-files-found: warn
|
|
retention-days: 14
|
|
|
|
- name: Fail job if suite failed
|
|
if: always()
|
|
run: |
|
|
if [ "${{ steps.e2e.outputs.rc }}" != "0" ]; then
|
|
echo "::error::suite ${{ matrix.suite }} failed (rc=${{ steps.e2e.outputs.rc }})"
|
|
exit 1
|
|
fi
|
|
|
|
single_teardown:
|
|
name: Single env · teardown
|
|
needs: [single_provision, single_suite]
|
|
if: always()
|
|
runs-on: [self-hosted, ci-single]
|
|
timeout-minutes: 20
|
|
env:
|
|
TOFU_LOG: /tmp/e2e-tofu-single-td-${{ github.run_id }}.log
|
|
ARTIFACT_DIR: /tmp/spinifex-e2e-single-diag-${{ github.run_id }}
|
|
WAN_IP: ${{ needs.single_provision.outputs.wan_ip }}
|
|
SSH_KEY: ${{ needs.single_provision.outputs.ssh_key }}
|
|
steps:
|
|
# Reuse the persisted mulga/ tofu-cluster workspace from single_provision.
|
|
# Re-checkout only spinifex (for ci-fmt + diag scripts); checking out mulga
|
|
# again would wipe the local tofu state and orphan the VM.
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
path: spinifex
|
|
|
|
- name: Capture network/IPsec diagnostics on VM
|
|
if: ${{ needs.single_provision.result == 'success' && env.WAN_IP != '' }}
|
|
run: |
|
|
set +e
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
mkdir -p "${ARTIFACT_DIR}"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "${SSH_KEY}")
|
|
VM=tf-user@${WAN_IP}
|
|
scp "${SSH_OPTS[@]}" \
|
|
"${GITHUB_WORKSPACE}/spinifex/.github/scripts/capture-net-diag.sh" \
|
|
"$VM":/tmp/capture-net-diag.sh 2>/dev/null
|
|
ssh "${SSH_OPTS[@]}" "$VM" "bash /tmp/capture-net-diag.sh '${ARTIFACT_DIR}/net-diag'" 2>/dev/null
|
|
ssh "${SSH_OPTS[@]}" "$VM" 'sudo journalctl -u "spinifex-*" --no-pager --output=short-iso --since "90 min ago"' \
|
|
> "${ARTIFACT_DIR}/spinifex-journal.log" 2>/dev/null
|
|
mkdir -p "${ARTIFACT_DIR}/lb-console"
|
|
ssh "${SSH_OPTS[@]}" "$VM" 'sudo sh -c "cd /run/spinifex 2>/dev/null && tar -cf - console-*.log 2>/dev/null"' \
|
|
| tar -C "${ARTIFACT_DIR}/lb-console" -xf - 2>/dev/null
|
|
true
|
|
|
|
- uses: actions/upload-artifact@v7
|
|
if: always()
|
|
with:
|
|
name: e2e-single-diag-${{ github.run_id }}
|
|
path: ${{ env.ARTIFACT_DIR }}
|
|
if-no-files-found: ignore
|
|
retention-days: 14
|
|
|
|
# Reclaim any resource leaked by a crashed/interrupted suite before the VM
|
|
# is destroyed. Scoped to this run's tag, best-effort, never fails the job.
|
|
- name: Sweep leaked run resources on VM
|
|
if: ${{ needs.single_provision.result == 'success' && env.WAN_IP != '' }}
|
|
run: |
|
|
set +e
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "${SSH_KEY}")
|
|
VM=tf-user@${WAN_IP}
|
|
banner "sweep run-tagged resources (run ${{ github.run_id }})"
|
|
ssh "${SSH_OPTS[@]}" "$VM" \
|
|
"cd \$HOME/spinifex-e2e-bin 2>/dev/null && \
|
|
SPINIFEX_E2E=1 SPINIFEX_MODE=single \
|
|
SPINIFEX_E2E_RUN_ID='${{ github.run_id }}' \
|
|
./teardown.test -test.v -test.run TestSweepRunResources -test.timeout=10m" \
|
|
2>&1 || true
|
|
true
|
|
|
|
- name: Teardown VM
|
|
if: always()
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
set +e
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
if [ -n "${WAN_IP}" ] && [ -n "${SSH_KEY}" ]; then
|
|
ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "${SSH_KEY}" \
|
|
tf-user@${WAN_IP} \
|
|
'pkill -u tf-user -TERM -f "/spinifex-e2e-bin/.*\.test( |$)" 2>/dev/null; sleep 1; pkill -u tf-user -KILL -f "/spinifex-e2e-bin/.*\.test( |$)" 2>/dev/null; true' \
|
|
2>/dev/null || true
|
|
fi
|
|
UID_SELF=$(id -u); WS="${GITHUB_WORKSPACE}"
|
|
reap() {
|
|
local sig="$1"
|
|
for pid in $(pgrep -u "$UID_SELF" -x tofu) $(pgrep -u "$UID_SELF" -x terraform); do
|
|
cwd=$(readlink "/proc/$pid/cwd" 2>/dev/null) || continue
|
|
case "$cwd" in "$WS"|"$WS"/*) kill "-$sig" "$pid" 2>/dev/null ;; esac
|
|
done
|
|
}
|
|
reap TERM; sleep 2; reap KILL
|
|
find "$WS" -name '.terraform.tfstate.lock.info' -delete 2>/dev/null
|
|
quiet_run "tofu workspace select" "$TOFU_LOG" tofu workspace select -or-create "${SPINIFEX_CI_ENV}"
|
|
quiet_run "telemetry flush" "$TOFU_LOG" timeout 120 ./flush-telemetry.sh "${SPINIFEX_CI_ENV}" || true
|
|
retry_run "tofu destroy" "$TOFU_LOG" timeout 600 tofu destroy -var-file=envs/${SPINIFEX_CI_ENV}.tfvars -auto-approve -input=false
|
|
quiet_run "scrub-env" "$TOFU_LOG" ./scrub-env.sh "${SPINIFEX_CI_ENV}"
|
|
ok "teardown complete"
|
|
|
|
- name: Upload tofu log
|
|
if: always()
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: tofu-log-single-td-${{ github.run_id }}
|
|
path: ${{ env.TOFU_LOG }}
|
|
if-no-files-found: ignore
|
|
retention-days: 14
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Multinode env
|
|
# ---------------------------------------------------------------------------
|
|
multi_provision:
|
|
name: Multi env · provision
|
|
if: ${{ inputs.run_multinode }}
|
|
runs-on: [self-hosted, ci-multi]
|
|
timeout-minutes: 45
|
|
outputs:
|
|
node1_ip: ${{ steps.cluster.outputs.node1_ip }}
|
|
ssh_key: ${{ steps.cluster.outputs.ssh_key }}
|
|
nodes_csv: ${{ steps.cluster.outputs.nodes_csv }}
|
|
suites: ${{ steps.suites.outputs.list }}
|
|
matrix: ${{ steps.suites.outputs.matrix }}
|
|
env:
|
|
TOFU_LOG: /tmp/e2e-tofu-multi-${{ github.run_id }}.log
|
|
# See single_provision above — daemon telemetry is baked in here, at
|
|
# provision time, before the multi_suite matrix exists.
|
|
SPINIFEX_OTEL_ATTRS: ci.run_id=${{ github.run_id }},ci.workflow=${{ github.workflow }},ci.cell=multi
|
|
steps:
|
|
- name: Reap Orphan Procs
|
|
run: |
|
|
set +e
|
|
UID_SELF=$(id -u); WS="${GITHUB_WORKSPACE}"
|
|
reap() {
|
|
local sig="$1"
|
|
for pid in $(pgrep -u "$UID_SELF" -x tofu) $(pgrep -u "$UID_SELF" -x terraform); do
|
|
cwd=$(readlink "/proc/$pid/cwd" 2>/dev/null) || continue
|
|
case "$cwd" in "$WS"|"$WS"/*) echo "reap $sig pid=$pid"; kill "-$sig" "$pid" 2>/dev/null ;; esac
|
|
done
|
|
}
|
|
reap TERM; sleep 3; reap KILL
|
|
find "$WS" -name '.terraform.tfstate.lock.info' -delete 2>/dev/null
|
|
true
|
|
|
|
- name: Clean Workspace
|
|
run: |
|
|
awk -v w="$GITHUB_WORKSPACE" '$2 ~ "^"w {print $2}' /proc/mounts \
|
|
| sort -r | xargs -r -I{} sudo umount -l -R {} || true
|
|
sudo rm -rf --one-file-system "$GITHUB_WORKSPACE"/*
|
|
|
|
- uses: actions/create-github-app-token@v3
|
|
id: app-token
|
|
with:
|
|
client-id: ${{ secrets.APP_ID }}
|
|
private-key: ${{ secrets.APP_PRIVATE_KEY }}
|
|
repositories: mulga
|
|
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
repository: mulgadc/mulga
|
|
token: ${{ steps.app-token.outputs.token }}
|
|
sparse-checkout: scripts/tofu-cluster
|
|
path: mulga
|
|
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
path: spinifex
|
|
|
|
- uses: actions/setup-go@v7
|
|
with:
|
|
go-version-file: spinifex/go.mod
|
|
cache: false
|
|
|
|
- name: Re-enable Go toolchain auto-download
|
|
run: echo "GOTOOLCHAIN=auto" >> "$GITHUB_ENV"
|
|
|
|
- name: Reclaim docker build cache
|
|
run: |
|
|
docker container prune -f || true
|
|
docker image prune -f || true
|
|
docker buildx prune -af --filter "until=24h" || true
|
|
docker system df || true
|
|
|
|
# See the matching note on single_provision.
|
|
- name: Resolve CI job id
|
|
uses: ./spinifex/.github/actions/otel-job-id
|
|
with:
|
|
job-name: Multi env · provision
|
|
|
|
- name: Build Install Artifacts
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
./build-install-artifacts.sh "${GIT_BRANCH}" \
|
|
"${RUNNER_TEMP}/spinifex-distro.tar.gz" \
|
|
"${RUNNER_TEMP}/setup.sh" \
|
|
"${RUNNER_TEMP}/spinifex-tests.tar"
|
|
|
|
- name: Provision VMs
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
export TF_VAR_git_branch="${GIT_BRANCH}"
|
|
quiet_run "tofu init" "$TOFU_LOG" tofu init -input=false
|
|
quiet_run "tofu workspace select" "$TOFU_LOG" tofu workspace select -or-create "${SPINIFEX_CI_ENV}"
|
|
quiet_run "tofu destroy (pre-clean)" "$TOFU_LOG" tofu destroy -var-file=envs/${SPINIFEX_CI_ENV}.tfvars -auto-approve -input=false || true
|
|
quiet_run "scrub-env (pre-clean)" "$TOFU_LOG" ./scrub-env.sh "${SPINIFEX_CI_ENV}" || true
|
|
retry_run "tofu apply" "$TOFU_LOG" tofu apply -var-file=envs/${SPINIFEX_CI_ENV}.tfvars -auto-approve -input=false
|
|
ok "3-node cluster provisioned"
|
|
|
|
- name: Bootstrap via Binary Install
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
SPX_EXTERNAL_POOL="${SPINIFEX_CI_POOL}" \
|
|
./bootstrap-install.sh "${SPINIFEX_CI_ENV}" \
|
|
"${RUNNER_TEMP}/setup.sh" \
|
|
"${RUNNER_TEMP}/spinifex-distro.tar.gz" \
|
|
--test-tar "${RUNNER_TEMP}/spinifex-tests.tar"
|
|
|
|
- name: Resolve cluster SSH details
|
|
id: cluster
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
INVENTORY=$(tofu output -json inventory)
|
|
NODE1_IP=$(echo "$INVENTORY" | jq -r '.nodes[0].wan_ip')
|
|
SSH_KEY=$(echo "$INVENTORY" | jq -r '.ssh_key_path'); SSH_KEY="${SSH_KEY/#\~/$HOME}"
|
|
NODE_COUNT=$(echo "$INVENTORY" | jq '.nodes | length')
|
|
NODES_CSV=""
|
|
for i in $(seq 0 $((NODE_COUNT - 1))); do
|
|
ip=$(echo "$INVENTORY" | jq -r ".nodes[$i].wan_ip")
|
|
if [ -z "$NODES_CSV" ]; then NODES_CSV="$ip"; else NODES_CSV="$NODES_CSV,$ip"; fi
|
|
done
|
|
echo "node1_ip=${NODE1_IP}" >> "$GITHUB_OUTPUT"
|
|
echo "ssh_key=${SSH_KEY}" >> "$GITHUB_OUTPUT"
|
|
echo "nodes_csv=${NODES_CSV}" >> "$GITHUB_OUTPUT"
|
|
|
|
# Mirrors single_provision's step: the multi leg previously ran multinode
|
|
# alone, silently dropping the lb and cert coverage that only a
|
|
# multi-node env can complete.
|
|
- name: Compute suite matrix
|
|
id: suites
|
|
env:
|
|
REQUESTED: ${{ inputs.multi_suites }}
|
|
run: |
|
|
set -euo pipefail
|
|
. "${GITHUB_WORKSPACE}/spinifex/.github/scripts/suite-sets.sh"
|
|
LIST="${REQUESTED:-${E2E_SUITES_MULTI}}"
|
|
e2e_suites_assert_subset "multi_suites" "${LIST}" "${E2E_SUITES_MULTI}"
|
|
echo "list=${LIST}" >> "$GITHUB_OUTPUT"
|
|
# 60 is the floor this job has always had; multi-node legs carry a
|
|
# heavier setup than single-node ones, which is why it is higher.
|
|
JSON=$(e2e_suite_matrix "${LIST}" 60)
|
|
echo "matrix=${JSON}" >> "$GITHUB_OUTPUT"
|
|
|
|
- name: Build multinode binaries on runner
|
|
working-directory: spinifex/tests/e2e
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
# teardown always builds: the run-scoped sweep binary runs in the
|
|
# teardown job, it is never a selectable suite leg.
|
|
SUITES_BUILD="${{ steps.suites.outputs.list }} teardown"
|
|
banner "build ${SUITES_BUILD// /, }"
|
|
group_open "go test -c"
|
|
make e2e-build SUITES_BUILD="${SUITES_BUILD}"
|
|
group_close
|
|
ok "$(basename _bin/multinode.test) $(stat -c '%s' _bin/multinode.test | numfmt --to=iec)"
|
|
|
|
- name: Ship test binaries to node1
|
|
run: |
|
|
set -euo pipefail
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${{ steps.cluster.outputs.ssh_key }}")
|
|
VM=tf-user@${{ steps.cluster.outputs.node1_ip }}
|
|
ssh "${SSH_OPTS[@]}" "$VM" "rm -rf \$HOME/spinifex-e2e-bin && mkdir -p \$HOME/spinifex-e2e-bin"
|
|
tar -C spinifex/tests/e2e/_bin -cf - . | ssh "${SSH_OPTS[@]}" "$VM" "tar -xf - -C \$HOME/spinifex-e2e-bin"
|
|
ok "shipped binaries to $VM"
|
|
|
|
- name: Start packet capture on all nodes
|
|
run: |
|
|
set +e
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${{ steps.cluster.outputs.ssh_key }}")
|
|
IFS=',' read -ra NODE_LIST <<< "${{ steps.cluster.outputs.nodes_csv }}"
|
|
for ip in "${NODE_LIST[@]}"; do
|
|
[ -z "$ip" ] && continue
|
|
scp "${SSH_OPTS[@]}" \
|
|
"${GITHUB_WORKSPACE}/spinifex/.github/scripts/start-net-capture.sh" \
|
|
tf-user@"$ip":/tmp/start-net-capture.sh
|
|
ssh "${SSH_OPTS[@]}" tf-user@"$ip" "bash /tmp/start-net-capture.sh" || true
|
|
done
|
|
|
|
- name: Upload tofu log
|
|
if: always()
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: tofu-log-multi-${{ github.run_id }}
|
|
path: ${{ env.TOFU_LOG }}
|
|
if-no-files-found: ignore
|
|
retention-days: 14
|
|
|
|
multi_suite:
|
|
name: Multi env · ${{ matrix.suite }}
|
|
needs: multi_provision
|
|
runs-on: [self-hosted, ci-multi]
|
|
# See the note on single_suite: the budget is the suite's, not the job's.
|
|
timeout-minutes: ${{ matrix.timeout }}
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
include: ${{ fromJSON(needs.multi_provision.outputs.matrix) }}
|
|
env:
|
|
NODE1_IP: ${{ needs.multi_provision.outputs.node1_ip }}
|
|
SSH_KEY: ${{ needs.multi_provision.outputs.ssh_key }}
|
|
NODES_CSV: ${{ needs.multi_provision.outputs.nodes_csv }}
|
|
ARTIFACT_DIR: /tmp/spinifex-e2e-multi-${{ github.run_id }}-${{ matrix.suite }}
|
|
steps:
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
path: spinifex
|
|
|
|
- uses: actions/setup-go@v7
|
|
with:
|
|
go-version-file: spinifex/go.mod
|
|
cache: false
|
|
|
|
- name: Install go-junit-report
|
|
run: |
|
|
go install github.com/jstemmer/go-junit-report/v2@latest
|
|
echo "$HOME/go/bin" >> "$GITHUB_PATH"
|
|
|
|
- name: Run ${{ matrix.suite }}
|
|
id: e2e
|
|
run: |
|
|
set +e
|
|
SUITE="${{ matrix.suite }}"
|
|
. "${GITHUB_WORKSPACE}/spinifex/.github/scripts/suite-sets.sh"
|
|
TMO="$(e2e_suite_timeout "${SUITE}")"
|
|
VM_HOST="tf-user@${NODE1_IP}"
|
|
TEST_RUN_FLAG=""
|
|
[ -n "${TEST_RUN}" ] && TEST_RUN_FLAG="-test.run=${TEST_RUN}"
|
|
cleanup_remote() {
|
|
ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "$SSH_KEY" "$VM_HOST" \
|
|
"pkill -u tf-user -TERM -f \"/spinifex-e2e-bin/${SUITE}\.test( |\$)\" 2>/dev/null; sleep 1; pkill -u tf-user -KILL -f \"/spinifex-e2e-bin/${SUITE}\.test( |\$)\" 2>/dev/null; true" \
|
|
2>/dev/null || true
|
|
}
|
|
trap cleanup_remote EXIT INT TERM
|
|
ssh -tt -o StrictHostKeyChecking=no -i "$SSH_KEY" "$VM_HOST" \
|
|
"set -u; mkdir -p '${ARTIFACT_DIR}'; cd \$HOME/spinifex-e2e-bin; \
|
|
printf '\n━━ suite %s ━━\n' \"${SUITE}\"; \
|
|
date -u +%Y-%m-%dT%H:%M:%SZ > '${ARTIFACT_DIR}/test-${SUITE}.start'; \
|
|
GITHUB_ACTIONS=true FORCE_COLOR=1 SPINIFEX_E2E=1 SPINIFEX_MODE=multinode \
|
|
SPINIFEX_E2E_RUN_ID='${{ github.run_id }}' \
|
|
SPINIFEX_NODES='${NODES_CSV}' SPINIFEX_NODE_IPS='${NODES_CSV}' \
|
|
SPINIFEX_SSH_USER=tf-user SPINIFEX_SSH_KEY=\$HOME/.ssh/tf-user-ap-southeast-2 \
|
|
ARTIFACT_DIR='${ARTIFACT_DIR}' \
|
|
./${SUITE}.test -test.v -test.timeout=${TMO} ${TEST_RUN_FLAG} \
|
|
2>&1 | tee '${ARTIFACT_DIR}/test-${SUITE}.log' \
|
|
| sed -uE 's/^[[:space:]]+([a-zA-Z0-9_]+_test\.go:[0-9]+: )?//'; \
|
|
exit \${PIPESTATUS[0]}"
|
|
echo "rc=$?" >> "$GITHUB_OUTPUT"
|
|
exit 0
|
|
|
|
- name: Collect suite artifacts from node1
|
|
if: always()
|
|
run: |
|
|
set +e
|
|
mkdir -p "${ARTIFACT_DIR}"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -i "${SSH_KEY}")
|
|
ssh "${SSH_OPTS[@]}" tf-user@${NODE1_IP} "tar -C '${ARTIFACT_DIR}' -cf - . 2>/dev/null || true" \
|
|
| tar -C "${ARTIFACT_DIR}" -xf - 2>/dev/null
|
|
true
|
|
|
|
- name: Convert test log to JUnit XML
|
|
if: always()
|
|
run: |
|
|
shopt -s nullglob
|
|
for LOG in "${ARTIFACT_DIR}"/test-*.log; do
|
|
BASE=$(basename "$LOG" .log); SUITE=${BASE#test-}
|
|
go-junit-report -in "$LOG" -out "${ARTIFACT_DIR}/junit-${SUITE}.xml" || true
|
|
done
|
|
|
|
- name: Publish test summary
|
|
if: always()
|
|
uses: ./spinifex/.github/actions/junit-report
|
|
with:
|
|
junit-glob: ${{ env.ARTIFACT_DIR }}/junit-*.xml
|
|
title: "Multi-Node E2E ${{ matrix.suite }} results"
|
|
|
|
# Tolerated on failure: the sink being unreachable must not turn a
|
|
# green test run red.
|
|
- name: Ship test results to Elasticsearch
|
|
if: always()
|
|
continue-on-error: true
|
|
uses: ./spinifex/.github/actions/junit-to-es
|
|
with:
|
|
junit-glob: ${{ env.ARTIFACT_DIR }}/junit-*.xml
|
|
cell: multi
|
|
|
|
- name: Analyze e2e failures
|
|
if: always()
|
|
uses: ./spinifex/.github/actions/e2e-analyze
|
|
with:
|
|
junit-glob: ${{ env.ARTIFACT_DIR }}/junit-*.xml
|
|
log-dir: ${{ env.ARTIFACT_DIR }}
|
|
title: "Multi-Node E2E ${{ matrix.suite }} failure analysis"
|
|
|
|
- uses: actions/upload-artifact@v7
|
|
if: always()
|
|
with:
|
|
name: e2e-multi-${{ matrix.suite }}-${{ github.run_id }}
|
|
path: ${{ env.ARTIFACT_DIR }}
|
|
if-no-files-found: warn
|
|
retention-days: 14
|
|
|
|
- name: Fail job if suite failed
|
|
if: always()
|
|
run: |
|
|
if [ "${{ steps.e2e.outputs.rc }}" != "0" ]; then
|
|
echo "::error::suite ${{ matrix.suite }} failed (rc=${{ steps.e2e.outputs.rc }})"
|
|
exit 1
|
|
fi
|
|
|
|
multi_teardown:
|
|
name: Multi env · teardown
|
|
needs: [multi_provision, multi_suite]
|
|
if: always() && inputs.run_multinode
|
|
runs-on: [self-hosted, ci-multi]
|
|
timeout-minutes: 20
|
|
env:
|
|
TOFU_LOG: /tmp/e2e-tofu-multi-td-${{ github.run_id }}.log
|
|
SSH_KEY: ${{ needs.multi_provision.outputs.ssh_key }}
|
|
NODES_CSV: ${{ needs.multi_provision.outputs.nodes_csv }}
|
|
steps:
|
|
- uses: actions/checkout@v7
|
|
with:
|
|
path: spinifex
|
|
|
|
# Reclaim leaked run-tagged resources before the cluster is destroyed.
|
|
- name: Sweep leaked run resources on node1
|
|
if: ${{ needs.multi_provision.result == 'success' && needs.multi_provision.outputs.node1_ip != '' }}
|
|
run: |
|
|
set +e
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
SSH_OPTS=(-o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "${SSH_KEY}")
|
|
VM=tf-user@${{ needs.multi_provision.outputs.node1_ip }}
|
|
banner "sweep run-tagged resources (run ${{ github.run_id }})"
|
|
ssh "${SSH_OPTS[@]}" "$VM" \
|
|
"cd \$HOME/spinifex-e2e-bin 2>/dev/null && \
|
|
SPINIFEX_E2E=1 SPINIFEX_MODE=multinode \
|
|
SPINIFEX_E2E_RUN_ID='${{ github.run_id }}' \
|
|
./teardown.test -test.v -test.run TestSweepRunResources -test.timeout=10m" \
|
|
2>&1 || true
|
|
true
|
|
|
|
- name: Teardown cluster
|
|
if: always()
|
|
working-directory: mulga/scripts/tofu-cluster
|
|
run: |
|
|
set +e
|
|
source "${GITHUB_WORKSPACE}/spinifex/.github/scripts/ci-fmt.sh"
|
|
if [ -n "${NODES_CSV}" ] && [ -n "${SSH_KEY}" ]; then
|
|
IFS=',' read -ra NODE_LIST <<< "${NODES_CSV}"
|
|
for ip in "${NODE_LIST[@]}"; do
|
|
ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 -i "${SSH_KEY}" \
|
|
tf-user@"$ip" \
|
|
'pkill -u tf-user -TERM -f "/spinifex-e2e-bin/.*\.test( |$)" 2>/dev/null; sleep 1; pkill -u tf-user -KILL -f "/spinifex-e2e-bin/.*\.test( |$)" 2>/dev/null; true' \
|
|
2>/dev/null || true
|
|
done
|
|
fi
|
|
UID_SELF=$(id -u); WS="${GITHUB_WORKSPACE}"
|
|
reap() {
|
|
local sig="$1"
|
|
for pid in $(pgrep -u "$UID_SELF" -x tofu) $(pgrep -u "$UID_SELF" -x terraform); do
|
|
cwd=$(readlink "/proc/$pid/cwd" 2>/dev/null) || continue
|
|
case "$cwd" in "$WS"|"$WS"/*) kill "-$sig" "$pid" 2>/dev/null ;; esac
|
|
done
|
|
}
|
|
reap TERM; sleep 2; reap KILL
|
|
find "$WS" -name '.terraform.tfstate.lock.info' -delete 2>/dev/null
|
|
quiet_run "tofu workspace select" "$TOFU_LOG" tofu workspace select -or-create "${SPINIFEX_CI_ENV}"
|
|
quiet_run "telemetry flush" "$TOFU_LOG" timeout 120 ./flush-telemetry.sh "${SPINIFEX_CI_ENV}" || true
|
|
retry_run "tofu destroy" "$TOFU_LOG" timeout 600 tofu destroy -var-file=envs/${SPINIFEX_CI_ENV}.tfvars -auto-approve -input=false
|
|
quiet_run "scrub-env" "$TOFU_LOG" ./scrub-env.sh "${SPINIFEX_CI_ENV}"
|
|
ok "teardown complete"
|
|
|
|
- name: Upload tofu log
|
|
if: always()
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: tofu-log-multi-td-${{ github.run_id }}
|
|
path: ${{ env.TOFU_LOG }}
|
|
if-no-files-found: ignore
|
|
retention-days: 14
|
|
|
|
e2e_suites_status:
|
|
name: E2E suite blocks · summary
|
|
if: always()
|
|
needs: [single_suite, multi_suite]
|
|
runs-on: ubuntu-26.04
|
|
timeout-minutes: 5
|
|
steps:
|
|
- name: Summarize
|
|
run: |
|
|
echo "## E2E suite-block results" >> "$GITHUB_STEP_SUMMARY"
|
|
echo "single_suite: ${{ needs.single_suite.result }}" >> "$GITHUB_STEP_SUMMARY"
|
|
echo "multi_suite: ${{ needs.multi_suite.result }}" >> "$GITHUB_STEP_SUMMARY"
|
|
case "${{ needs.single_suite.result }}" in success|skipped) ;; *) exit 1 ;; esac
|
|
case "${{ needs.multi_suite.result }}" in success|skipped) ;; *) exit 1 ;; esac
|