spinifex/tests/e2e/run-e2e.sh

#!/bin/bash
# run-e2e.sh — Single-node E2E test suite (production binary install).
#
# Assumes services are already running via systemd (bootstrap-install.sh).
# Uses production paths: /etc/spinifex, /var/log/spinifex, spx from PATH.
set -e

# Run from the directory containing this script (~/e2e-tests/)
cd "$(dirname "$0")"

# Source helper functions
source ./lib/multinode-helpers.sh

# Dump journald logs on failure
cleanup() {
    EXIT_CODE=$?
    if [ $EXIT_CODE -ne 0 ]; then
        for svc in spinifex-nats spinifex-predastore spinifex-viperblock \
                   spinifex-daemon spinifex-awsgw spinifex-vpcd; do
            echo "=== ${svc} ==="
            sudo journalctl -u "${svc}" --no-pager -n 200 2>/dev/null || true
        done
    fi
    exit $EXIT_CODE
}
trap cleanup EXIT

# Use Spinifex profile (spx admin init sets endpoint_url, ca_bundle, region in ~/.aws/config)
export AWS_PROFILE=spinifex

# Resolve gateway host from config
GATEWAY_HOST="localhost"
ENDPOINT_URL=$(aws configure get endpoint_url 2>/dev/null || true)
if [ -n "$ENDPOINT_URL" ]; then
    DETECTED_GW_HOST=$(echo "$ENDPOINT_URL" | sed 's|https\?://||;s|:.*||')
    if [ -n "$DETECTED_GW_HOST" ]; then
        GATEWAY_HOST="$DETECTED_GW_HOST"
    fi
fi

# Helper: set up an AWS CLI profile with credentials + endpoint/CA config from the spinifex profile
setup_test_profile() {
    local profile="$1" key_id="$2" secret="$3"
    aws configure set aws_access_key_id "$key_id" --profile "$profile"
    aws configure set aws_secret_access_key "$secret" --profile "$profile"
    aws configure set region "$(aws configure get region)" --profile "$profile"
    aws configure set endpoint_url "$(aws configure get endpoint_url)" --profile "$profile"
    aws configure set ca_bundle "$(aws configure get ca_bundle)" --profile "$profile"
}

# Phase 1: Environment Setup
echo "Phase 1: Environment Setup"

# Check for KVM support
echo "Checking for KVM support..."
if [ -e /dev/kvm ]; then
    echo "✅ /dev/kvm exists"
    if [ -w /dev/kvm ]; then
        echo "✅ /dev/kvm is writable"
    else
        echo "❌ /dev/kvm is NOT writable. QEMU will fail."
        exit 1
    fi
else
    echo "❌ /dev/kvm does NOT exist."
    exit 1
fi

# Wait for health checks on AWS Gateway
echo "Waiting for AWS Gateway..."
MAX_RETRIES=30
COUNT=0

until curl -sk "https://${GATEWAY_HOST}:9999" > /dev/null || [ $COUNT -eq $MAX_RETRIES ]; do
    echo "Waiting for gateway... ($COUNT/$MAX_RETRIES)"
    sleep 1
    COUNT=$((COUNT + 1))
done

if [ $COUNT -eq $MAX_RETRIES ]; then
    echo "Gateway failed to start"
    exit 1
fi

# Wait for daemon NATS subscriptions to be active
wait_for_daemon_ready "https://${GATEWAY_HOST}:9999"

# Discover the cluster's availability zone and region dynamically
SPINIFEX_AZ=$(aws ec2 describe-availability-zones --query 'AvailabilityZones[0].ZoneName' --output text)
SPINIFEX_REGION=$(aws ec2 describe-availability-zones --query 'AvailabilityZones[0].RegionName' --output text)
echo "Discovered AZ: $SPINIFEX_AZ, Region: $SPINIFEX_REGION"

# No need for AWS_EC2/AWS_IAM vars — endpoint_url and ca_bundle are in the profile config

# Phase 1b: Cluster Stats CLI
echo "Phase 1b: Cluster Stats CLI"

# Test spx get nodes — should show node1 as Ready
echo "Testing spx get nodes..."
GET_NODES_OUTPUT=$(spx get nodes --timeout 5s 2>/dev/null)
echo "$GET_NODES_OUTPUT"
if ! echo "$GET_NODES_OUTPUT" | grep -q "Ready"; then
    echo "spx get nodes did not show any Ready nodes"
    exit 1
fi
echo "spx get nodes passed"

# Test spx top nodes — should show CPU/MEM stats
echo "Testing spx top nodes..."
TOP_NODES_OUTPUT=$(spx top nodes --timeout 5s 2>/dev/null)
echo "$TOP_NODES_OUTPUT"
if ! echo "$TOP_NODES_OUTPUT" | grep -q "0/"; then
    echo "spx top nodes did not show resource stats"
    exit 1
fi
echo "spx top nodes passed"

# Test spx get vms — should show no VMs yet
echo "Testing spx get vms (empty)..."
GET_VMS_OUTPUT=$(spx get vms --timeout 5s 2>/dev/null)
echo "$GET_VMS_OUTPUT"
if ! echo "$GET_VMS_OUTPUT" | grep -q "No VMs found"; then
    echo "spx get vms should show 'No VMs found' before any launches"
    exit 1
fi
echo "spx get vms (empty) passed"

# Phase 2: Discovery & Metadata
echo "Phase 2: Discovery & Metadata"
# Verify describe-regions (just ensure it returns at least one region)
aws ec2 describe-regions | jq -e '.Regions | length > 0'

# Verify describe-availability-zones
echo "Verifying describe-availability-zones..."
AZ_OUTPUT=$(aws ec2 describe-availability-zones)
echo "$AZ_OUTPUT" | jq -e '.AvailabilityZones | length > 0'
AZ_NAME=$(echo "$AZ_OUTPUT" | jq -r '.AvailabilityZones[0].ZoneName')
AZ_STATE=$(echo "$AZ_OUTPUT" | jq -r '.AvailabilityZones[0].State')
if [ "$AZ_STATE" != "available" ]; then
    echo "Expected AZ state 'available', got '$AZ_STATE'"
    exit 1
fi
echo "DescribeAvailabilityZones verified (Zone=$AZ_NAME, State=$AZ_STATE)"

# Discover available instance types from Spinifex
# Spinifex generates these based on the host CPU (e.g., m7i.micro, m8g.small, etc.)
echo "Discovering available instance types..."
AVAILABLE_TYPES=$(aws ec2 describe-instance-types --query 'InstanceTypes[*].InstanceType' --output text)
echo "Available instance types: $AVAILABLE_TYPES"

# Pick the nano instance type for minimal resource usage in tests
INSTANCE_TYPE=$(echo $AVAILABLE_TYPES | tr ' ' '\n' | grep -m1 'nano')
if [ -z "$INSTANCE_TYPE" ] || [ "$INSTANCE_TYPE" == "None" ]; then
    echo "No instance types found!"
    exit 1
fi
echo "Selected instance type for test: $INSTANCE_TYPE"

# Get architecture for the selected instance type
ARCH=$(aws ec2 describe-instance-types --instance-types "$INSTANCE_TYPE" --query 'InstanceTypes[0].ProcessorInfo.SupportedArchitectures[0]' --output text)
echo "Detected architecture for $INSTANCE_TYPE: $ARCH"

# Verify describe-instance-types (ensure the chosen type is available)
aws ec2 describe-instance-types | jq -e ".InstanceTypes[] | select(.InstanceType==\"$INSTANCE_TYPE\")"

# Phase 2b: Serial Console Access Settings
echo "Phase 2b: Serial Console Access Settings"

# Default should be disabled
SERIAL_DEFAULT=$(aws ec2 get-serial-console-access-status --query 'SerialConsoleAccessEnabled' --output text)
if [ "$SERIAL_DEFAULT" != "False" ]; then
    echo "Expected serial console access default to be False, got $SERIAL_DEFAULT"
    exit 1
fi
echo "  Default state: disabled"

# Enable
ENABLE_RESULT=$(aws ec2 enable-serial-console-access --query 'SerialConsoleAccessEnabled' --output text)
if [ "$ENABLE_RESULT" != "True" ]; then
    echo "Expected enable to return True, got $ENABLE_RESULT"
    exit 1
fi
SERIAL_ENABLED=$(aws ec2 get-serial-console-access-status --query 'SerialConsoleAccessEnabled' --output text)
if [ "$SERIAL_ENABLED" != "True" ]; then
    echo "Expected serial console access to be True after enable, got $SERIAL_ENABLED"
    exit 1
fi
echo "  Enabled: $SERIAL_ENABLED"

# Disable
DISABLE_RESULT=$(aws ec2 disable-serial-console-access --query 'SerialConsoleAccessEnabled' --output text)
if [ "$DISABLE_RESULT" != "False" ]; then
    echo "Expected disable to return False, got $DISABLE_RESULT"
    exit 1
fi
SERIAL_DISABLED=$(aws ec2 get-serial-console-access-status --query 'SerialConsoleAccessEnabled' --output text)
if [ "$SERIAL_DISABLED" != "False" ]; then
    echo "Expected serial console access to be False after disable, got $SERIAL_DISABLED"
    exit 1
fi
echo "  Disabled: $SERIAL_DISABLED"
echo "Serial console access settings tests passed"

# Phase 3: SSH Key Management
echo "Phase 3: SSH Key Management"
# Create test-key-1 (create-key-pair) and verify private key material is returned
KEY_MATERIAL=$(aws ec2 create-key-pair --key-name test-key-1 --query 'KeyMaterial' --output text)
if [ -z "$KEY_MATERIAL" ] || [ "$KEY_MATERIAL" == "None" ]; then
    echo "Failed to create key pair test-key-1"
    exit 1
fi
echo "$KEY_MATERIAL" > test-key-1.pem
chmod 600 test-key-1.pem

# Generate a local RSA key and import it as test-key-2 (import-key-pair)
ssh-keygen -t rsa -b 2048 -f test-key-2-local -N ""
aws ec2 import-key-pair --key-name test-key-2 --public-key-material "fileb://test-key-2-local.pub"

# Verify both keys are present (describe-key-pairs)
aws ec2 describe-key-pairs --query 'KeyPairs[*].KeyName' --output text | grep test-key-1
aws ec2 describe-key-pairs --query 'KeyPairs[*].KeyName' --output text | grep test-key-2

# Delete test-key-2 (delete-key-pair) and verify only one remains
aws ec2 delete-key-pair --key-name test-key-2
REMAINING_KEYS=$(aws ec2 describe-key-pairs --query 'KeyPairs[*].KeyName' --output text)
echo "Remaining keys: $REMAINING_KEYS"
echo "$REMAINING_KEYS" | grep test-key-1
if echo "$REMAINING_KEYS" | grep -q test-key-2; then
    echo "test-key-2 was not deleted"
    exit 1
fi

# Phase 4: Image Management
echo "Phase 4: Image Management"
# Discover whichever Ubuntu AMI bootstrap-install.sh staged. v6+ gold image
# stages 26.04 (resolute); v3 staged 24.04 (noble). Catalog name follows
# `ami-ubuntu-<ver>-<arch>`.
if [ "$ARCH" = "x86_64" ]; then
    ARCH_LABEL="x86_64"
else
    ARCH_LABEL="arm64"
fi
echo "Looking up Ubuntu AMI for arch=${ARCH_LABEL}..."
AMI_ID=$(aws ec2 describe-images \
    --filters "Name=name,Values=ami-ubuntu-26.04-${ARCH_LABEL},ami-ubuntu-24.04-${ARCH_LABEL}" \
    --query 'Images[0].ImageId' --output text)
IMAGE_NAME=$(aws ec2 describe-images \
    --filters "Name=name,Values=ami-ubuntu-26.04-${ARCH_LABEL},ami-ubuntu-24.04-${ARCH_LABEL}" \
    --query 'Images[0].Name' --output text | sed 's/^ami-//')
echo "Using image: $IMAGE_NAME"

if [ -z "$AMI_ID" ] || [ "$AMI_ID" = "None" ]; then
    echo "Failed to capture AMI ID — bootstrap-install.sh did not stage ubuntu-{24,26}.04-${ARCH_LABEL}"
    exit 1
fi
echo "Captured AMI ID: $AMI_ID"

# Verify the AMI exists using its ID (describe-images)
echo "Verifying AMI availability..."
aws ec2 describe-images --image-ids "$AMI_ID" | jq -e ".Images[0] | select(.ImageId==\"$AMI_ID\")"

# Phase 5: Instance Lifecycle
echo "Phase 5: Instance Lifecycle"

# Authorize SSH on the default VPC's default SG before any run-instances. AWS
# default SGs allow ingress only from members of the same SG; subsequent SSH
# probes (Phase 5a-ii, 5a-iv, 7, 8c, 8d) come from the test runner's IP and
# would be dropped by the OVN port-group ACL otherwise.
DEFAULT_VPC_PHASE5=$(aws ec2 describe-vpcs \
    --query 'Vpcs[?IsDefault==`true`].VpcId | [0]' --output text)
DEFAULT_SG_PHASE5=$(aws ec2 describe-security-groups \
    --filters "Name=vpc-id,Values=$DEFAULT_VPC_PHASE5" "Name=group-name,Values=default" \
    --query 'SecurityGroups[0].GroupId' --output text)
echo "Default VPC: $DEFAULT_VPC_PHASE5; default SG: $DEFAULT_SG_PHASE5"
# Tolerate InvalidPermission.Duplicate on re-runs (idempotent).
set +e
AUTH_OUTPUT=$(aws ec2 authorize-security-group-ingress \
    --group-id "$DEFAULT_SG_PHASE5" \
    --protocol tcp --port 22 --cidr 0.0.0.0/0 2>&1)
AUTH_EXIT=$?
set -e
if [ $AUTH_EXIT -ne 0 ] && ! echo "$AUTH_OUTPUT" | grep -q 'InvalidPermission.Duplicate'; then
    echo "Failed to authorize SSH ingress on default SG: $AUTH_OUTPUT"
    exit 1
fi
echo "  Default SG ingress: tcp/22 from 0.0.0.0/0"

# Phase 5f exercises ICMP egress through OVN; the reply path needs explicit
# ICMP ingress on the default SG even though SGs are stateful in AWS — keeps
# parity with the Go single-suite fixture.
set +e
ICMP_OUTPUT=$(aws ec2 authorize-security-group-ingress \
    --group-id "$DEFAULT_SG_PHASE5" \
    --protocol icmp --port -1 --cidr 0.0.0.0/0 2>&1)
ICMP_EXIT=$?
set -e
if [ $ICMP_EXIT -ne 0 ] && ! echo "$ICMP_OUTPUT" | grep -q 'InvalidPermission.Duplicate'; then
    echo "Failed to authorize ICMP ingress on default SG: $ICMP_OUTPUT"
    exit 1
fi
echo "  Default SG ingress: icmp from 0.0.0.0/0"

# Launch a VM (run-instances)
echo "Running: aws ec2 run-instances --image-id $AMI_ID --instance-type $INSTANCE_TYPE --key-name test-key-1"
# Capture full output for debugging
set +e  # Temporarily disable exit on error to capture output
RUN_OUTPUT=$(aws ec2 run-instances --image-id "$AMI_ID" --instance-type "$INSTANCE_TYPE" --key-name test-key-1 2>&1)
RUN_EXIT_CODE=$?
set -e  # Re-enable exit on error
echo "Run instances exit code: $RUN_EXIT_CODE"
echo "Run instances output: $RUN_OUTPUT"
if [ $RUN_EXIT_CODE -ne 0 ]; then
    echo "❌ Failed to launch instance - AWS CLI returned error"
    exit 1
fi
INSTANCE_ID=$(echo "$RUN_OUTPUT" | jq -r '.Instances[0].InstanceId')
if [ -z "$INSTANCE_ID" ] || [ "$INSTANCE_ID" == "None" ] || [ "$INSTANCE_ID" == "null" ]; then
    echo "Failed to launch instance - no InstanceId in response"
    exit 1
fi
echo "Launched Instance ID: $INSTANCE_ID"

# Poll until state is running (describe-instances)
echo "Polling for instance running state..."
COUNT=0
STATE="unknown"
while [ $COUNT -lt 60 ]; do
    # Capture full output to check if instance even exists in the response
    DESCRIBE_OUTPUT=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID") || {
        echo "⚠️  Gateway request failed, retrying... ($COUNT/60)"
        sleep 1
        COUNT=$((COUNT + 1))
        continue
    }

    if [ -z "$DESCRIBE_OUTPUT" ]; then
        echo "⚠️  Gateway returned empty response, retrying..."
        sleep 1
        COUNT=$((COUNT + 1))
        continue
    fi

    # Extract state using jq
    STATE=$(echo "$DESCRIBE_OUTPUT" | jq -r '.Reservations[0].Instances[0].State.Name // "not-found"')

    echo "Instance state: $STATE"
    if [ "$STATE" == "running" ]; then
        break
    fi

    if [ "$STATE" == "terminated" ]; then
        echo "❌ Instance terminated unexpectedly!"
        exit 1
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$STATE" != "running" ]; then
    echo "Instance failed to reach running state"
    exit 1
fi

# Phase 5a-pre: Verify spx get vms shows running instance
echo "Phase 5a-pre: Cluster Stats CLI (with running VM)"
GET_VMS_OUTPUT=$(spx get vms --timeout 5s 2>/dev/null)
echo "$GET_VMS_OUTPUT"
if ! echo "$GET_VMS_OUTPUT" | grep -q "$INSTANCE_ID"; then
    echo "spx get vms did not show running instance $INSTANCE_ID"
    exit 1
fi
echo "spx get vms shows running instance"

# Phase 5a: Validate instance metadata fields
echo "Phase 5a: Instance Metadata Validation"
DESCRIBE_META=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID")
META_TYPE=$(echo "$DESCRIBE_META" | jq -r '.Reservations[0].Instances[0].InstanceType')
META_KEY=$(echo "$DESCRIBE_META" | jq -r '.Reservations[0].Instances[0].KeyName')
META_IMAGE=$(echo "$DESCRIBE_META" | jq -r '.Reservations[0].Instances[0].ImageId')
META_BDM=$(echo "$DESCRIBE_META" | jq -r '.Reservations[0].Instances[0].BlockDeviceMappings | length')

if [ "$META_TYPE" != "$INSTANCE_TYPE" ]; then
    echo "InstanceType mismatch: expected $INSTANCE_TYPE, got $META_TYPE"
    exit 1
fi
if [ "$META_KEY" != "test-key-1" ]; then
    echo "KeyName mismatch: expected test-key-1, got $META_KEY"
    exit 1
fi
if [ "$META_IMAGE" != "$AMI_ID" ]; then
    echo "ImageId mismatch: expected $AMI_ID, got $META_IMAGE"
    exit 1
fi
if [ "$META_BDM" -lt 1 ]; then
    echo "Expected at least 1 BlockDeviceMapping, got $META_BDM"
    exit 1
fi
echo "Instance metadata validated (Type=$META_TYPE, Key=$META_KEY, Image=$META_IMAGE, BDMs=$META_BDM)"

# Phase 5a-ii: SSH Connectivity & Volume Verification
echo "Phase 5a-ii: SSH Connectivity & Volume Verification"

# Determine SSH connection method:
# - If instance has a public IP (external networking enabled), SSH via public IP on port 22
# - Otherwise, fall back to QEMU hostfwd (dev_networking mode)
INST_PUBLIC_IP=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PublicIpAddress' --output text 2>/dev/null || echo "None")

if [ -n "$INST_PUBLIC_IP" ] && [ "$INST_PUBLIC_IP" != "None" ] && [ "$INST_PUBLIC_IP" != "null" ]; then
    SSH_HOST="$INST_PUBLIC_IP"
    SSH_PORT=22
    echo "SSH via public IP: $SSH_HOST:$SSH_PORT"
else
    echo "No public IP — using QEMU hostfwd for SSH"
    # set -e would abort on $() returning non-zero, hiding the diagnostic below
    if ! SSH_PORT=$(get_ssh_port "$INSTANCE_ID"); then
        SSH_PORT=""
    fi
    if [ -z "$SSH_PORT" ]; then
        echo "Failed to get SSH port for instance $INSTANCE_ID"
        exit 1
    fi
    SSH_HOST=$(get_ssh_host "$INSTANCE_ID")
    echo "SSH endpoint: $SSH_HOST:$SSH_PORT"
fi

# Wait for SSH to become ready (VM boot + cloud-init)
wait_for_ssh "$SSH_HOST" "$SSH_PORT" "test-key-1.pem" 60

# Test basic SSH connectivity
test_ssh_connectivity "$SSH_HOST" "$SSH_PORT" "test-key-1.pem"

# Check root volume size via lsblk
echo "Verifying root volume size from inside the VM..."
ROOT_VOL_SIZE_API=$(aws ec2 describe-volumes --query 'Volumes[0].Size' --output text)
# Find the disk backing the root filesystem (avoids picking up floppy/cdrom devices)
# 1. findmnt gets the source device for / (e.g. /dev/vda1)
# 2. lsblk PKNAME resolves to parent disk name (e.g. vda)
# 3. lsblk -b -d gets that disk's byte size
ROOT_DISK_BYTES=$(ssh -o StrictHostKeyChecking=no \
    -o UserKnownHostsFile=/dev/null \
    -o LogLevel=ERROR \
    -o ConnectTimeout=5 \
    -o BatchMode=yes \
    -p "$SSH_PORT" \
    -i "test-key-1.pem" \
    ec2-user@"$SSH_HOST" 'SRC=$(findmnt -n -o SOURCE /); PKN=$(lsblk -n -o PKNAME "$SRC" 2>/dev/null | head -1); DEV=${PKN:-$(basename "$SRC")}; lsblk -b -d -n -o SIZE "/dev/$DEV"' | tr -d '[:space:]')
if [ -z "$ROOT_DISK_BYTES" ] || [ "$ROOT_DISK_BYTES" = "0" ]; then
    echo "Failed to get root disk size from VM (got: '$ROOT_DISK_BYTES')"
    echo "lsblk debug output:"
    ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
        -o ConnectTimeout=5 -o BatchMode=yes -p "$SSH_PORT" -i "test-key-1.pem" \
        ec2-user@"$SSH_HOST" 'lsblk -b -d; echo "---"; findmnt -n -o SOURCE /; cat /proc/partitions' || true
    exit 1
fi
ROOT_DISK_GIB=$((ROOT_DISK_BYTES / 1073741824))
echo "Root disk size from VM: ${ROOT_DISK_GIB}GiB (API reports: ${ROOT_VOL_SIZE_API}GiB)"
if [ "$ROOT_DISK_GIB" -ne "$ROOT_VOL_SIZE_API" ]; then
    echo "Root volume size mismatch: VM reports ${ROOT_DISK_GIB}GiB, API reports ${ROOT_VOL_SIZE_API}GiB"
    exit 1
fi
echo "Root volume size verified"

# Verify hostname contains instance ID
echo "Verifying hostname inside the VM..."
VM_HOSTNAME=$(ssh -o StrictHostKeyChecking=no \
    -o UserKnownHostsFile=/dev/null \
    -o ConnectTimeout=5 \
    -o BatchMode=yes \
    -p "$SSH_PORT" \
    -i "test-key-1.pem" \
    ec2-user@"$SSH_HOST" 'hostname' 2>/dev/null)
echo "VM hostname: $VM_HOSTNAME"
# Hostname uses truncated ID: spinifex-vm-<first 8 hex chars of instance ID>
SHORT_ID=$(echo "$INSTANCE_ID" | sed 's/^i-//' | cut -c1-8)
if echo "$VM_HOSTNAME" | grep -q "$SHORT_ID"; then
    echo "Hostname contains instance ID prefix ($SHORT_ID)"
else
    echo "WARNING: Hostname '$VM_HOSTNAME' does not contain instance ID prefix '$SHORT_ID' (non-fatal)"
fi

echo "SSH connectivity and volume verification passed"

# Phase 5a-iii: Console Output
echo "Phase 5a-iii: Console Output"

CONSOLE_OUTPUT=$(aws ec2 get-console-output --instance-id "$INSTANCE_ID")
CONSOLE_INSTANCE=$(echo "$CONSOLE_OUTPUT" | jq -r '.InstanceId')
CONSOLE_DATA=$(echo "$CONSOLE_OUTPUT" | jq -r '.Output // empty')

if [ "$CONSOLE_INSTANCE" != "$INSTANCE_ID" ]; then
    echo "GetConsoleOutput InstanceId mismatch: expected $INSTANCE_ID, got $CONSOLE_INSTANCE"
    exit 1
fi
echo "  GetConsoleOutput succeeded (InstanceId=$CONSOLE_INSTANCE, has output=$([ -n "$CONSOLE_DATA" ] && echo yes || echo no))"

echo "Console output tests passed"

# Verify root volume attached to the instance (describe-volumes)
VOLUME_ID=$(aws ec2 describe-volumes --query 'Volumes[0].VolumeId' --output text)
if [ -z "$VOLUME_ID" ] || [ "$VOLUME_ID" == "None" ]; then
    echo "Failed to find volume for instance $INSTANCE_ID"
    exit 1
fi
echo "Volume ID: $VOLUME_ID"

# Phase 5b: Volume Lifecycle (Attach/Detach)
echo "Phase 5b: Volume Lifecycle (Attach/Detach)"
echo "Testing volume create -> resize -> attach -> detach -> delete..."

# Create a test volume
echo "Creating 10GB volume in ${SPINIFEX_AZ}..."
CREATE_OUTPUT=$(aws ec2 create-volume --size 10 --availability-zone "$SPINIFEX_AZ")
TEST_VOLUME_ID=$(echo "$CREATE_OUTPUT" | jq -r '.VolumeId')

if [ -z "$TEST_VOLUME_ID" ] || [ "$TEST_VOLUME_ID" == "null" ]; then
    echo "Failed to create test volume"
    echo "Output: $CREATE_OUTPUT"
    exit 1
fi
echo "Created volume: $TEST_VOLUME_ID"

# Resize to 20GB
NEW_SIZE=20
echo "Modifying volume to ${NEW_SIZE}GB..."
aws ec2 modify-volume --volume-id "$TEST_VOLUME_ID" --size "$NEW_SIZE"

# Verify resize
echo "Verifying resize..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    VOLUME_SIZE=$(aws ec2 describe-volumes --volume-ids "$TEST_VOLUME_ID" \
        --query 'Volumes[0].Size' --output text)

    if [ "$VOLUME_SIZE" -eq "$NEW_SIZE" ]; then
        echo "Volume resized successfully to ${NEW_SIZE}GB"
        break
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$VOLUME_SIZE" -ne "$NEW_SIZE" ]; then
    echo "Volume failed to resize to ${NEW_SIZE}GB (current: ${VOLUME_SIZE}GB)"
    exit 1
fi

# Attach volume to the running instance
echo "Attaching volume $TEST_VOLUME_ID to instance $INSTANCE_ID..."
aws ec2 attach-volume --volume-id "$TEST_VOLUME_ID" --instance-id "$INSTANCE_ID" --device /dev/sdf

# Verify attachment
echo "Verifying volume attachment..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    ATTACH_STATE=$(aws ec2 describe-volumes --volume-ids "$TEST_VOLUME_ID" \
        --query 'Volumes[0].Attachments[0].State' --output text)
    ATTACH_INSTANCE=$(aws ec2 describe-volumes --volume-ids "$TEST_VOLUME_ID" \
        --query 'Volumes[0].Attachments[0].InstanceId' --output text)
    VOL_STATE=$(aws ec2 describe-volumes --volume-ids "$TEST_VOLUME_ID" \
        --query 'Volumes[0].State' --output text)

    if [ "$VOL_STATE" == "in-use" ] && [ "$ATTACH_STATE" == "attached" ] && [ "$ATTACH_INSTANCE" == "$INSTANCE_ID" ]; then
        echo "Volume attached successfully (State=$VOL_STATE, AttachState=$ATTACH_STATE, Instance=$ATTACH_INSTANCE)"
        break
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$ATTACH_STATE" != "attached" ] || [ "$ATTACH_INSTANCE" != "$INSTANCE_ID" ]; then
    echo "Volume attachment verification failed (AttachState=$ATTACH_STATE, Instance=$ATTACH_INSTANCE)"
    exit 1
fi

# Detach volume (without --instance-id to test gateway resolution path)
echo "Detaching volume $TEST_VOLUME_ID..."
aws ec2 detach-volume --volume-id "$TEST_VOLUME_ID"

# Verify detachment
echo "Verifying volume detachment..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    VOL_STATE=$(aws ec2 describe-volumes --volume-ids "$TEST_VOLUME_ID" \
        --query 'Volumes[0].State' --output text)

    if [ "$VOL_STATE" == "available" ]; then
        echo "Volume detached successfully (State=$VOL_STATE)"
        break
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$VOL_STATE" != "available" ]; then
    echo "Volume detachment verification failed (State=$VOL_STATE)"
    exit 1
fi

# Delete the test volume
echo "Deleting test volume $TEST_VOLUME_ID..."
aws ec2 delete-volume --volume-id "$TEST_VOLUME_ID"

# Verify deletion
echo "Verifying volume deletion..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    set +e
    VOLUME_CHECK=$(aws ec2 describe-volumes --volume-ids "$TEST_VOLUME_ID" \
        --query 'Volumes[0].VolumeId' --output text 2>&1)
    DESCRIBE_EXIT=$?
    set -e

    if [ $DESCRIBE_EXIT -ne 0 ] || [ "$VOLUME_CHECK" == "None" ] || [ -z "$VOLUME_CHECK" ]; then
        echo "Volume deleted successfully"
        break
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ $COUNT -ge 60 ]; then
    echo "Volume deletion verification timed out"
    exit 1
fi

echo "Volume lifecycle test passed (create -> resize -> attach -> detach -> delete)"

# Phase 5b-ii: DescribeVolumeStatus
echo "Phase 5b-ii: DescribeVolumeStatus"
echo "Testing describe-volume-status on root volume..."
VOL_STATUS_OUTPUT=$(aws ec2 describe-volume-status --volume-ids "$VOLUME_ID")
VOL_STATUS_ID=$(echo "$VOL_STATUS_OUTPUT" | jq -r '.VolumeStatuses[0].VolumeId')
VOL_STATUS_STATE=$(echo "$VOL_STATUS_OUTPUT" | jq -r '.VolumeStatuses[0].VolumeStatus.Status')

if [ "$VOL_STATUS_ID" != "$VOLUME_ID" ]; then
    echo "DescribeVolumeStatus VolumeId mismatch: expected $VOLUME_ID, got $VOL_STATUS_ID"
    exit 1
fi
echo "DescribeVolumeStatus verified (VolumeId=$VOL_STATUS_ID, Status=$VOL_STATUS_STATE)"

# Phase 5c: Snapshot Lifecycle
echo "Phase 5c: Snapshot Lifecycle"
echo "Testing snapshot create -> describe -> copy -> delete..."

# Use the root volume from Phase 5 — it's already attached and mounted in
# viperblockd, which is required for create-snapshot (the ebs.snapshot handler
# needs a live VB instance to flush).
echo "Using root volume $VOLUME_ID (already attached to $INSTANCE_ID)"
ROOT_VOL_SIZE=$(aws ec2 describe-volumes --volume-ids "$VOLUME_ID" \
    --query 'Volumes[0].Size' --output text)

# Create a snapshot from the attached root volume
echo "Creating snapshot from volume $VOLUME_ID..."
SNAP_OUTPUT=$(aws ec2 create-snapshot --volume-id "$VOLUME_ID" --description "e2e-test-snapshot")
SNAPSHOT_ID=$(echo "$SNAP_OUTPUT" | jq -r '.SnapshotId')

if [ -z "$SNAPSHOT_ID" ] || [ "$SNAPSHOT_ID" == "null" ]; then
    echo "Failed to create snapshot"
    echo "Output: $SNAP_OUTPUT"
    exit 1
fi
echo "Created snapshot: $SNAPSHOT_ID"

# Verify snapshot fields from create response
SNAP_STATE=$(echo "$SNAP_OUTPUT" | jq -r '.State')
SNAP_VOL_REF=$(echo "$SNAP_OUTPUT" | jq -r '.VolumeId')
SNAP_SIZE=$(echo "$SNAP_OUTPUT" | jq -r '.VolumeSize')
SNAP_PROGRESS=$(echo "$SNAP_OUTPUT" | jq -r '.Progress')

if [ "$SNAP_VOL_REF" != "$VOLUME_ID" ]; then
    echo "Snapshot VolumeId mismatch: expected $VOLUME_ID, got $SNAP_VOL_REF"
    exit 1
fi
if [ "$SNAP_SIZE" -ne "$ROOT_VOL_SIZE" ]; then
    echo "Snapshot VolumeSize mismatch: expected $ROOT_VOL_SIZE, got $SNAP_SIZE"
    exit 1
fi
echo "Snapshot create response verified (State=$SNAP_STATE, VolumeId=$SNAP_VOL_REF, Size=$SNAP_SIZE, Progress=$SNAP_PROGRESS)"

# Poll until snapshot is completed (should be immediate in v1, but poll for forward-compat)
echo "Waiting for snapshot to complete..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    SNAP_STATE=$(aws ec2 describe-snapshots --snapshot-ids "$SNAPSHOT_ID" \
        --query 'Snapshots[0].State' --output text)

    if [ "$SNAP_STATE" == "completed" ]; then
        echo "Snapshot completed"
        break
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$SNAP_STATE" != "completed" ]; then
    echo "Snapshot failed to reach completed state (State=$SNAP_STATE)"
    exit 1
fi

# Describe snapshot by ID and verify fields
echo "Verifying snapshot via describe-snapshots..."
DESCRIBE_SNAP=$(aws ec2 describe-snapshots --snapshot-ids "$SNAPSHOT_ID")
DESC_VOL_ID=$(echo "$DESCRIBE_SNAP" | jq -r '.Snapshots[0].VolumeId')
DESC_SIZE=$(echo "$DESCRIBE_SNAP" | jq -r '.Snapshots[0].VolumeSize')
DESC_DESC=$(echo "$DESCRIBE_SNAP" | jq -r '.Snapshots[0].Description')

if [ "$DESC_VOL_ID" != "$VOLUME_ID" ]; then
    echo "Describe snapshot VolumeId mismatch: expected $VOLUME_ID, got $DESC_VOL_ID"
    exit 1
fi
if [ "$DESC_SIZE" -ne "$ROOT_VOL_SIZE" ]; then
    echo "Describe snapshot VolumeSize mismatch: expected $ROOT_VOL_SIZE, got $DESC_SIZE"
    exit 1
fi
if [ "$DESC_DESC" != "e2e-test-snapshot" ]; then
    echo "Describe snapshot Description mismatch: expected 'e2e-test-snapshot', got '$DESC_DESC'"
    exit 1
fi
echo "Describe snapshot verified (VolumeId=$DESC_VOL_ID, Size=$DESC_SIZE, Description=$DESC_DESC)"

# Copy the snapshot
echo "Copying snapshot $SNAPSHOT_ID..."
COPY_OUTPUT=$(aws ec2 copy-snapshot --source-snapshot-id "$SNAPSHOT_ID" --source-region "$SPINIFEX_REGION" --description "e2e-copy")
COPY_SNAPSHOT_ID=$(echo "$COPY_OUTPUT" | jq -r '.SnapshotId')

if [ -z "$COPY_SNAPSHOT_ID" ] || [ "$COPY_SNAPSHOT_ID" == "null" ]; then
    echo "Failed to copy snapshot"
    echo "Output: $COPY_OUTPUT"
    exit 1
fi
echo "Copied snapshot: $COPY_SNAPSHOT_ID"

# Verify the copy is a distinct snapshot
if [ "$COPY_SNAPSHOT_ID" == "$SNAPSHOT_ID" ]; then
    echo "Copy snapshot ID should differ from original"
    exit 1
fi

# Describe all snapshots — should see both original and copy
TOTAL_SNAPS=$(aws ec2 describe-snapshots \
    --snapshot-ids "$SNAPSHOT_ID" "$COPY_SNAPSHOT_ID" \
    --query 'length(Snapshots)' --output text)

if [ "$TOTAL_SNAPS" -ne 2 ]; then
    echo "Expected 2 snapshots, got $TOTAL_SNAPS"
    exit 1
fi
echo "Both snapshots visible via describe-snapshots"

# Verify copy has correct description
COPY_DESC=$(aws ec2 describe-snapshots --snapshot-ids "$COPY_SNAPSHOT_ID" \
    --query 'Snapshots[0].Description' --output text)
if [ "$COPY_DESC" != "e2e-copy" ]; then
    echo "Copy description mismatch: expected 'e2e-copy', got '$COPY_DESC'"
    exit 1
fi

# Delete the original snapshot
echo "Deleting original snapshot $SNAPSHOT_ID..."
aws ec2 delete-snapshot --snapshot-id "$SNAPSHOT_ID"

# Verify original is gone, copy remains
echo "Verifying snapshot deletion..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    set +e
    SNAP_CHECK=$(aws ec2 describe-snapshots --snapshot-ids "$SNAPSHOT_ID" \
        --query 'Snapshots[0].SnapshotId' --output text 2>&1)
    SNAP_EXIT=$?
    set -e

    if [ $SNAP_EXIT -ne 0 ] || [ "$SNAP_CHECK" == "None" ] || [ -z "$SNAP_CHECK" ]; then
        echo "Original snapshot deleted successfully"
        break
    fi

    sleep 1
    COUNT=$((COUNT + 1))
done

if [ $COUNT -ge 60 ]; then
    echo "Snapshot deletion verification timed out"
    exit 1
fi

# Verify copy still exists
COPY_STATE=$(aws ec2 describe-snapshots --snapshot-ids "$COPY_SNAPSHOT_ID" \
    --query 'Snapshots[0].State' --output text)
if [ "$COPY_STATE" != "completed" ]; then
    echo "Copy snapshot should still exist (State=$COPY_STATE)"
    exit 1
fi
echo "Copy snapshot still intact after original deletion"

# Delete the copy
echo "Deleting copy snapshot $COPY_SNAPSHOT_ID..."
aws ec2 delete-snapshot --snapshot-id "$COPY_SNAPSHOT_ID"

echo "Snapshot lifecycle test passed (create -> describe -> copy -> delete)"

# Phase 5d: Verify Snapshot-Backed Instance Launch
echo "Phase 5d: Verify Snapshot-Backed Instance Launch"
echo "All run-instances calls go through cloneAMIToVolume() -> OpenFromSnapshot(),"
echo "so the Phase 5 instance is already snapshot-backed. Successful boot in"
echo "Phase 5a-iii is itself proof; here we just confirm the AMI carries a"
echo "snapshot reference via the EC2 API."

AMI_SNAP_ID=$(aws ec2 describe-images --image-ids "$AMI_ID" \
    --query 'Images[0].BlockDeviceMappings[0].Ebs.SnapshotId' --output text 2>/dev/null || echo "")
if [ -z "$AMI_SNAP_ID" ] || [ "$AMI_SNAP_ID" == "None" ]; then
    echo "AMI $AMI_ID has no snapshot reference — launch was NOT snapshot-backed"
    exit 1
fi
echo "AMI $AMI_ID is snapshot-backed (SnapshotId=$AMI_SNAP_ID)"

echo "Snapshot-backed instance launch verified"

# Phase 5e: CreateImage Lifecycle
echo "Phase 5e: CreateImage Lifecycle"
echo "Creating custom AMI from running instance $INSTANCE_ID..."

CREATE_IMAGE_OUTPUT=$(aws ec2 create-image --instance-id "$INSTANCE_ID" --name "e2e-custom-ami" --description "E2E test custom image")
CUSTOM_AMI_ID=$(echo "$CREATE_IMAGE_OUTPUT" | jq -r '.ImageId')

if [ -z "$CUSTOM_AMI_ID" ] || [ "$CUSTOM_AMI_ID" == "null" ]; then
    echo "Failed to create custom image"
    echo "Output: $CREATE_IMAGE_OUTPUT"
    exit 1
fi
echo "Created custom AMI: $CUSTOM_AMI_ID"

# Verify the custom AMI exists via describe-images
echo "Verifying custom AMI via describe-images..."
CUSTOM_IMAGE=$(aws ec2 describe-images --image-ids "$CUSTOM_AMI_ID")
CUSTOM_IMAGE_NAME=$(echo "$CUSTOM_IMAGE" | jq -r '.Images[0].Name')
CUSTOM_IMAGE_STATE=$(echo "$CUSTOM_IMAGE" | jq -r '.Images[0].State')

if [ "$CUSTOM_IMAGE_NAME" != "e2e-custom-ami" ]; then
    echo "Custom AMI name mismatch: expected 'e2e-custom-ami', got '$CUSTOM_IMAGE_NAME'"
    exit 1
fi
echo "Custom AMI verified (Name=$CUSTOM_IMAGE_NAME, State=$CUSTOM_IMAGE_STATE)"

# Extract the backing snapshot ID from the custom AMI via describe-images
# (needed later to clean up before termination, so DeleteOnTermination can work)
CUSTOM_AMI_SNAP_ID=$(aws ec2 describe-images --image-ids "$CUSTOM_AMI_ID" \
    --query 'Images[0].BlockDeviceMappings[0].Ebs.SnapshotId' --output text 2>/dev/null || echo "")
if [ "$CUSTOM_AMI_SNAP_ID" == "None" ]; then
    CUSTOM_AMI_SNAP_ID=""
fi
if [ -n "$CUSTOM_AMI_SNAP_ID" ]; then
    echo "Custom AMI backing snapshot: $CUSTOM_AMI_SNAP_ID"
else
    echo "WARNING: Could not resolve backing snapshot ID from custom AMI"
fi

echo "CreateImage lifecycle test passed"

# Phase 5f: Security Group Enforcement (egress)
# Verifies vpcd programs OVN ACLs that actually drop traffic when an SG
# rule is revoked. We test EGRESS because in single-node dev_networking
# mode, INGRESS SSH bypasses OVN via the QEMU hostfwd NIC — the OVN tap
# only owns the default route inside the VM, so egress is what hits the
# ACL. The default SG ships with one allow-all egress rule we can flip.
echo "Phase 5f: Security Group Enforcement (egress ACL)"

# Discover the VM's OVN-side gateway from inside the VM (cloud-init
# suppresses the default route on the dev NIC, so this is always the
# OVN logical-router port).
PROBE_GW=$(ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
    -o LogLevel=ERROR -o ConnectTimeout=5 -o BatchMode=yes \
    -p "$SSH_PORT" -i "test-key-1.pem" \
    ec2-user@"$SSH_HOST" "ip route show default | awk '{print \$3}' | head -1" 2>/dev/null | tr -d '[:space:]')
if [ -z "$PROBE_GW" ]; then
    echo "  ERROR: could not discover default gateway inside VM — skipping Phase 5f"
else
    echo "  Probe target (VM default gateway): $PROBE_GW"

    probe_egress_icmp() {
        ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
            -o LogLevel=ERROR -o ConnectTimeout=5 -o BatchMode=yes \
            -p "$SSH_PORT" -i "test-key-1.pem" \
            ec2-user@"$SSH_HOST" "ping -c 3 -W 2 $PROBE_GW" 2>&1
    }

    # Restore the default egress rule on any failure so later phases stay healthy.
    sg_egress_restore() {
        aws ec2 authorize-security-group-egress \
            --group-id "$DEFAULT_SG_PHASE5" \
            --ip-permissions 'IpProtocol=-1,IpRanges=[{CidrIp=0.0.0.0/0}]' >/dev/null 2>&1 || true
    }

    # Test 5f-1: Baseline — allow-all egress is in place.
    # `|| true` so set -e doesn't kill us when the probe legitimately fails
    # (e.g., OVN logical router not responding to ICMP echo in this env);
    # the SKIP branch below needs to be reachable.
    echo "Test 5f-1: Egress baseline (allow-all)"
    BASELINE_OUT=$(probe_egress_icmp || true)
    if echo "$BASELINE_OUT" | grep -qE '[1-3] (packets )?received'; then
        echo "  PASS: ICMP egress works with default allow-all"
        SG_ENFORCE_RUN=true
    else
        echo "  SKIP: baseline ICMP did not work; cannot verify enforcement"
        echo "  (env may block ICMP between VM and gateway regardless of SG)"
        echo "  Output: $BASELINE_OUT"
        SG_ENFORCE_RUN=false
    fi

    if [ "$SG_ENFORCE_RUN" = "true" ]; then
        # Test 5f-2: Revoke egress → ICMP must be dropped.
        echo "Test 5f-2: Revoke egress → expect drop"
        aws ec2 revoke-security-group-egress \
            --group-id "$DEFAULT_SG_PHASE5" \
            --ip-permissions 'IpProtocol=-1,IpRanges=[{CidrIp=0.0.0.0/0}]' >/dev/null
        sleep 3  # ACL propagation (vpcd handler is synchronous; small buffer for OVN flow install)
        REVOKE_OUT=$(probe_egress_icmp || true)
        if echo "$REVOKE_OUT" | grep -qE '0 (packets )?received|100% packet loss'; then
            echo "  PASS: ICMP dropped after revoke"
        else
            echo "  FAIL: ICMP still succeeded after revoking allow-all egress"
            echo "  Output: $REVOKE_OUT"
            sg_egress_restore
            exit 1
        fi

        # Test 5f-3: Re-authorize → ICMP works again.
        echo "Test 5f-3: Re-authorize egress → expect allow"
        sg_egress_restore
        sleep 3
        RESTORE_OUT=$(probe_egress_icmp || true)
        if echo "$RESTORE_OUT" | grep -qE '[1-3] (packets )?received'; then
            echo "  PASS: ICMP restored after re-authorize"
        else
            echo "  FAIL: ICMP still dropped after re-authorize"
            echo "  Output: $RESTORE_OUT"
            exit 1
        fi

        echo "Phase 5f: Security Group enforcement verified (revoke → drop, authorize → allow)"
    fi
fi

# Phase 6: Tag Management
echo "Phase 6: Tag Management"

# 6a: Create tags on the instance
echo "Creating tags on instance $INSTANCE_ID..."
aws ec2 create-tags --resources "$INSTANCE_ID" --tags Key=Name,Value=e2e-test Key=Environment,Value=testing Key=DeleteMe,Value=please

# 6b: Verify tags with describe-tags (resource-id filter)
echo "Verifying tags on instance..."
TAG_COUNT=$(aws ec2 describe-tags --filters "Name=resource-id,Values=$INSTANCE_ID" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$TAG_COUNT" -ne 3 ]; then
    echo "Expected 3 tags on instance, got $TAG_COUNT"
    exit 1
fi
echo "Instance has $TAG_COUNT tags"

# 6c: Create tags on the root volume
echo "Creating tags on volume $VOLUME_ID..."
aws ec2 create-tags --resources "$VOLUME_ID" --tags Key=Name,Value=e2e-root-vol Key=Environment,Value=testing

# 6d: Filter by key
echo "Testing key filter..."
ENV_TAGS=$(aws ec2 describe-tags --filters "Name=key,Values=Environment" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$ENV_TAGS" -ne 2 ]; then
    echo "Expected 2 'Environment' tags across resources, got $ENV_TAGS"
    exit 1
fi
echo "Key filter returned $ENV_TAGS tags"

# 6e: Filter by resource-type
echo "Testing resource-type filter..."
INSTANCE_TAGS=$(aws ec2 describe-tags --filters "Name=resource-type,Values=instance" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$INSTANCE_TAGS" -ne 3 ]; then
    echo "Expected 3 instance tags, got $INSTANCE_TAGS"
    exit 1
fi
echo "Resource-type filter returned $INSTANCE_TAGS instance tags"

# 6f: Overwrite a tag value
echo "Overwriting Name tag on instance..."
aws ec2 create-tags --resources "$INSTANCE_ID" --tags Key=Name,Value=e2e-test-updated
UPDATED_NAME=$(aws ec2 describe-tags \
    --filters "Name=resource-id,Values=$INSTANCE_ID" "Name=key,Values=Name" \
    --query 'Tags[0].Value' --output text)
if [ "$UPDATED_NAME" != "e2e-test-updated" ]; then
    echo "Tag overwrite failed: expected 'e2e-test-updated', got '$UPDATED_NAME'"
    exit 1
fi
echo "Tag overwrite verified"

# 6g: Delete tag by key (unconditional)
echo "Deleting DeleteMe tag unconditionally..."
aws ec2 delete-tags --resources "$INSTANCE_ID" --tags Key=DeleteMe
REMAINING=$(aws ec2 describe-tags --filters "Name=resource-id,Values=$INSTANCE_ID" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$REMAINING" -ne 2 ]; then
    echo "Expected 2 tags after unconditional delete, got $REMAINING"
    exit 1
fi
echo "Unconditional delete verified ($REMAINING tags remaining)"

# 6h: Delete tag with wrong value (should NOT delete)
echo "Attempting delete with wrong value (should be no-op)..."
aws ec2 delete-tags --resources "$INSTANCE_ID" --tags Key=Environment,Value=production
ENV_STILL=$(aws ec2 describe-tags \
    --filters "Name=resource-id,Values=$INSTANCE_ID" "Name=key,Values=Environment" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$ENV_STILL" -ne 1 ]; then
    echo "Value-conditional delete incorrectly removed tag"
    exit 1
fi
echo "Value-conditional mismatch preserved tag"

# 6i: Delete tag with correct value
echo "Deleting Environment tag with correct value..."
aws ec2 delete-tags --resources "$INSTANCE_ID" --tags Key=Environment,Value=testing
ENV_GONE=$(aws ec2 describe-tags \
    --filters "Name=resource-id,Values=$INSTANCE_ID" "Name=key,Values=Environment" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$ENV_GONE" -ne 0 ]; then
    echo "Value-conditional delete failed to remove matching tag"
    exit 1
fi
echo "Value-conditional match deleted tag"

# 6j: Verify only Name tag remains on instance
FINAL_COUNT=$(aws ec2 describe-tags --filters "Name=resource-id,Values=$INSTANCE_ID" \
    --query 'length(Tags || `[]`)' --output text)
if [ "$FINAL_COUNT" -ne 1 ]; then
    echo "Expected 1 tag remaining on instance, got $FINAL_COUNT"
    exit 1
fi
echo "Tag management tests passed"

# Phase 7: Instance State Transitions
echo "Phase 7: Instance State Transitions"

# Stop instance (stop-instances) and verify transition to stopped (describe-instances)
echo "Stopping instance..."
aws ec2 stop-instances --instance-ids "$INSTANCE_ID"
COUNT=0
while [ $COUNT -lt 60 ]; do
    STATE=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" --query 'Reservations[0].Instances[0].State.Name' --output text)
    echo "Instance state: $STATE"
    if [ "$STATE" == "stopped" ]; then
        break
    fi
    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$STATE" != "stopped" ]; then
    echo "Instance failed to reach stopped state"
    exit 1
fi

# Reboot stopped instance (should fail)
echo "Attempting reboot of stopped instance (should fail)..."
expect_error "IncorrectInstanceState" aws ec2 reboot-instances --instance-ids "$INSTANCE_ID"
echo "Reboot-stopped correctly rejected"

# Phase 7a: Attach volume to stopped instance (should fail)
echo "Phase 7a: Attach Volume to Stopped Instance (Error Path)"
echo "Creating a volume to test attach-to-stopped..."
STOPPED_VOL_OUTPUT=$(aws ec2 create-volume --size 10 --availability-zone "$SPINIFEX_AZ")
STOPPED_VOL_ID=$(echo "$STOPPED_VOL_OUTPUT" | jq -r '.VolumeId')
echo "Created volume: $STOPPED_VOL_ID"

echo "Attempting attach to stopped instance (should fail)..."
expect_error "IncorrectInstanceState" aws ec2 attach-volume \
    --volume-id "$STOPPED_VOL_ID" --instance-id "$INSTANCE_ID" --device /dev/sdg
echo "Attach-to-stopped correctly rejected"

# Clean up the test volume
aws ec2 delete-volume --volume-id "$STOPPED_VOL_ID"
echo "Cleaned up test volume $STOPPED_VOL_ID"

# Phase 7b: ModifyInstanceAttribute (change instance type while stopped, verify via SSH)
echo "Phase 7b: ModifyInstanceAttribute"
echo "Instance is stopped — modifying instance type to verify changes take effect on restart"

# Derive an upsized type in the same family: nano → small (same vCPUs, more RAM)
# Note: xlarge needs 16GB RAM which exceeds the 8GB CI VM — use small (2GB) instead
MODIFY_TYPE="${INSTANCE_TYPE%.nano}.small"
echo "Changing instance type from $INSTANCE_TYPE to $MODIFY_TYPE..."

# Get expected vCPU and memory for the new type
# Note: --instance-types filter may not be supported; use jq to select the correct type
TYPES_JSON=$(aws ec2 describe-instance-types)
EXPECTED_VCPUS=$(echo "$TYPES_JSON" | jq -r ".InstanceTypes[] | select(.InstanceType==\"$MODIFY_TYPE\") | .VCpuInfo.DefaultVCpus")
EXPECTED_MEM_MIB=$(echo "$TYPES_JSON" | jq -r ".InstanceTypes[] | select(.InstanceType==\"$MODIFY_TYPE\") | .MemoryInfo.SizeInMiB")
echo "Expected resources after modify: ${EXPECTED_VCPUS} vCPUs, ${EXPECTED_MEM_MIB} MiB RAM"

# Modify the instance type
aws ec2 modify-instance-attribute --instance-id "$INSTANCE_ID" \
    --instance-type "{\"Value\": \"$MODIFY_TYPE\"}"

# Verify describe-instances reflects the new type
MODIFIED_TYPE=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].InstanceType' --output text)
if [ "$MODIFIED_TYPE" != "$MODIFY_TYPE" ]; then
    echo "ModifyInstanceAttribute failed: expected type $MODIFY_TYPE, got $MODIFIED_TYPE"
    exit 1
fi
echo "Instance type updated to $MODIFIED_TYPE"

# Start instance with the new type
echo "Starting instance with modified type..."
aws ec2 start-instances --instance-ids "$INSTANCE_ID"
COUNT=0
while [ $COUNT -lt 60 ]; do
    STATE=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
        --query 'Reservations[0].Instances[0].State.Name' --output text)
    echo "Instance state: $STATE"
    if [ "$STATE" == "running" ]; then
        break
    fi
    sleep 1
    COUNT=$((COUNT + 1))
done

if [ "$STATE" != "running" ]; then
    echo "Instance failed to reach running state after type change"
    exit 1
fi

# Re-detect SSH endpoint (may have changed after restart with new QEMU config)
echo "Detecting SSH endpoint for restarted instance..."
INST_PUBLIC_IP=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PublicIpAddress' --output text 2>/dev/null || echo "None")
if [ -n "$INST_PUBLIC_IP" ] && [ "$INST_PUBLIC_IP" != "None" ] && [ "$INST_PUBLIC_IP" != "null" ]; then
    SSH_HOST="$INST_PUBLIC_IP"
    SSH_PORT=22
else
    # set -e would abort on $() returning non-zero
    if ! SSH_PORT=$(get_ssh_port "$INSTANCE_ID"); then
        echo "ERROR: Failed to get SSH port for instance $INSTANCE_ID"
        exit 1
    fi
    SSH_HOST=$(get_ssh_host "$INSTANCE_ID")
fi
echo "SSH endpoint: $SSH_HOST:$SSH_PORT"

# Wait for SSH to become ready
wait_for_ssh "$SSH_HOST" "$SSH_PORT" "test-key-1.pem" 60

# Verify vCPU count matches the new instance type (nproc reports online CPUs)
echo "Verifying vCPU count inside the VM..."
VM_VCPUS=$(ssh -o StrictHostKeyChecking=no \
    -o UserKnownHostsFile=/dev/null \
    -o LogLevel=ERROR \
    -o ConnectTimeout=5 \
    -o BatchMode=yes \
    -p "$SSH_PORT" \
    -i "test-key-1.pem" \
    ec2-user@"$SSH_HOST" 'nproc' | tr -d '[:space:]')
echo "VM reports $VM_VCPUS vCPUs (expected $EXPECTED_VCPUS)"
if [ "$VM_VCPUS" != "$EXPECTED_VCPUS" ]; then
    echo "vCPU count mismatch after ModifyInstanceAttribute: VM reports $VM_VCPUS, expected $EXPECTED_VCPUS"
    exit 1
fi
echo "vCPU count verified"

# Verify memory matches the new instance type (MemTotal from /proc/meminfo)
echo "Verifying memory inside the VM..."
VM_MEM_KB=$(ssh -o StrictHostKeyChecking=no \
    -o UserKnownHostsFile=/dev/null \
    -o LogLevel=ERROR \
    -o ConnectTimeout=5 \
    -o BatchMode=yes \
    -p "$SSH_PORT" \
    -i "test-key-1.pem" \
    ec2-user@"$SSH_HOST" "awk '/MemTotal/ {print \$2}' /proc/meminfo" | tr -d '[:space:]')
VM_MEM_MIB=$((VM_MEM_KB / 1024))
# Allow 15% margin for kernel reserved memory
EXPECTED_MEM_LOW=$((EXPECTED_MEM_MIB * 85 / 100))
echo "VM reports ${VM_MEM_MIB} MiB total RAM (expected ~${EXPECTED_MEM_MIB} MiB, threshold ${EXPECTED_MEM_LOW} MiB)"
if [ "$VM_MEM_MIB" -lt "$EXPECTED_MEM_LOW" ]; then
    echo "Memory too low after ModifyInstanceAttribute: VM reports ${VM_MEM_MIB} MiB, expected at least ${EXPECTED_MEM_LOW} MiB"
    exit 1
fi
echo "Memory verified"

echo "ModifyInstanceAttribute test passed (type change + vCPU + memory verified via SSH)"

# Phase 7c-pre: Reboot Running Instance
echo "Phase 7c-pre: Reboot Instance"

# Capture pre-reboot metadata
PRE_REBOOT_IP=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PrivateIpAddress' --output text)

echo "Rebooting instance..."
aws ec2 reboot-instances --instance-ids "$INSTANCE_ID"

# Verify state stays running (poll a few times to confirm no transient state change)
COUNT=0
while [ $COUNT -lt 10 ]; do
    STATE=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
        --query 'Reservations[0].Instances[0].State.Name' --output text)
    if [ "$STATE" != "running" ]; then
        echo "Instance unexpectedly left running state: $STATE"
        exit 1
    fi
    sleep 1
    COUNT=$((COUNT + 1))
done
echo "Instance state remained running during reboot"

# Wait for SSH to come back (guest OS restarts)
INST_PUBLIC_IP=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PublicIpAddress' --output text 2>/dev/null || echo "None")
if [ -n "$INST_PUBLIC_IP" ] && [ "$INST_PUBLIC_IP" != "None" ] && [ "$INST_PUBLIC_IP" != "null" ]; then
    SSH_HOST="$INST_PUBLIC_IP"
    SSH_PORT=22
else
    # set -e would abort on $() returning non-zero
    if ! SSH_PORT=$(get_ssh_port "$INSTANCE_ID"); then
        echo "ERROR: Failed to get SSH port for instance $INSTANCE_ID"
        exit 1
    fi
    SSH_HOST=$(get_ssh_host "$INSTANCE_ID")
fi
wait_for_ssh "$SSH_HOST" "$SSH_PORT" "test-key-1.pem" 60

# Verify guest actually rebooted (uptime < 120 seconds)
UPTIME_SECS=$(ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
    -o LogLevel=ERROR -o ConnectTimeout=5 -o BatchMode=yes \
    -p "$SSH_PORT" -i "test-key-1.pem" \
    ec2-user@"$SSH_HOST" 'cat /proc/uptime | cut -d. -f1' | tr -d '[:space:]')
echo "Guest uptime after reboot: ${UPTIME_SECS}s"
if [ "$UPTIME_SECS" -gt 120 ]; then
    echo "Guest uptime too high — reboot may not have occurred"
    exit 1
fi

# Verify metadata unchanged
POST_REBOOT_IP=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PrivateIpAddress' --output text)
if [ "$PRE_REBOOT_IP" != "$POST_REBOOT_IP" ]; then
    echo "IP changed after reboot: $PRE_REBOOT_IP -> $POST_REBOOT_IP"
    exit 1
fi
echo "Reboot instance test passed"

# Phase 7c: RunInstances with count > 1
echo "Phase 7c: RunInstances with MinCount/MaxCount > 1"
echo "Launching 2 instances in a single run-instances call..."
MULTI_RUN_OUTPUT=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --key-name test-key-1 \
    --count 2)
MULTI_COUNT=$(echo "$MULTI_RUN_OUTPUT" | jq '.Instances | length')

if [ "$MULTI_COUNT" -ne 2 ]; then
    echo "Expected 2 instances from run-instances --count 2, got $MULTI_COUNT"
    exit 1
fi

MULTI_ID_1=$(echo "$MULTI_RUN_OUTPUT" | jq -r '.Instances[0].InstanceId')
MULTI_ID_2=$(echo "$MULTI_RUN_OUTPUT" | jq -r '.Instances[1].InstanceId')
echo "Launched 2 instances: $MULTI_ID_1, $MULTI_ID_2"

# Wait for both to reach running state
for MID in "$MULTI_ID_1" "$MULTI_ID_2"; do
    echo "Waiting for $MID to reach running state..."
    COUNT=0
    while [ $COUNT -lt 60 ]; do
        MSTATE=$(aws ec2 describe-instances --instance-ids "$MID" \
            --query 'Reservations[0].Instances[0].State.Name' --output text) || {
            sleep 1
            COUNT=$((COUNT + 1))
            continue
        }
        if [ "$MSTATE" == "running" ]; then
            echo "Instance $MID is running"
            break
        fi
        sleep 1
        COUNT=$((COUNT + 1))
    done
    if [ "$MSTATE" != "running" ]; then
        echo "Instance $MID failed to reach running state"
        exit 1
    fi
done

# Terminate the multi-launch instances
echo "Terminating multi-launch instances..."
aws ec2 terminate-instances --instance-ids "$MULTI_ID_1" "$MULTI_ID_2"
for MID in "$MULTI_ID_1" "$MULTI_ID_2"; do
    COUNT=0
    while [ $COUNT -lt 60 ]; do
        MSTATE=$(aws ec2 describe-instances --instance-ids "$MID" \
            --query 'Reservations[0].Instances[0].State.Name' --output text)
        if [ "$MSTATE" == "terminated" ] || [ "$MSTATE" == "None" ]; then
            break
        fi
        sleep 1
        COUNT=$((COUNT + 1))
    done
done
echo "RunInstances count>1 test passed"

# Phase 8: Negative / Error Path Tests
echo "Phase 8: Negative / Error Path Tests"

# 8a: RunInstances with malformed AMI ID (missing ami- prefix)
echo "8a: RunInstances with malformed AMI ID..."
expect_error "InvalidAMIID.Malformed" aws ec2 run-instances \
    --image-id notanami --instance-type "$INSTANCE_TYPE" --key-name test-key-1

# 8b: RunInstances with invalid instance type
echo "8b: RunInstances with invalid instance type..."
expect_error "InvalidInstanceType" aws ec2 run-instances \
    --image-id "$AMI_ID" --instance-type "x99.superlarge" --key-name test-key-1

# 8c: Attach an already in-use volume (root volume is attached to running instance)
echo "8c: Attach already in-use volume..."
expect_error "VolumeInUse" aws ec2 attach-volume \
    --volume-id "$VOLUME_ID" --instance-id "$INSTANCE_ID" --device /dev/sdg

# 8d: Detach boot/root volume (should be rejected)
echo "8d: Detach boot volume..."
expect_error "OperationNotPermitted" aws ec2 detach-volume \
    --volume-id "$VOLUME_ID" --instance-id "$INSTANCE_ID"

# 8e: Delete a non-existent snapshot
echo "8e: Delete non-existent snapshot..."
expect_error "InvalidSnapshot.NotFound" aws ec2 delete-snapshot \
    --snapshot-id snap-nonexistent000000

# 8f: Call an unsupported Action (use raw curl to send an invalid Action)
echo "8f: Unsupported Action..."
set +e
UNSUPPORTED_OUTPUT=$(curl -s -k -X POST "https://${GATEWAY_HOST}:9999/" \
    -H "Content-Type: application/x-www-form-urlencoded" \
    -d "Action=DescribeFakeThings&Version=2016-11-15" 2>&1)
set -e
if echo "$UNSUPPORTED_OUTPUT" | grep -q "InvalidAction\|UnknownAction\|Error"; then
    echo "  Got expected error for unsupported action"
else
    echo "  WARNING: Unsupported action did not return expected error (may need auth)"
fi

# 8g: RunInstances with non-existent AMI (valid format but doesn't exist)
echo "8g: RunInstances with non-existent AMI..."
expect_error "InvalidAMIID.NotFound" aws ec2 run-instances \
    --image-id ami-0000000000000dead --instance-type "$INSTANCE_TYPE" --key-name test-key-1

# 8h: RunInstances with non-existent key pair
echo "8h: RunInstances with non-existent key pair..."
expect_error "InvalidKeyPair.NotFound" aws ec2 run-instances \
    --image-id "$AMI_ID" --instance-type "$INSTANCE_TYPE" --key-name nonexistent-key-xyz

# 8i: DeleteVolume on non-existent volume
echo "8i: DeleteVolume non-existent volume..."
expect_error "InvalidVolume.NotFound" aws ec2 delete-volume \
    --volume-id vol-0000000000000dead

# 8j: CreateKeyPair with duplicate name (test-key-1 exists from Phase 3)
echo "8j: CreateKeyPair duplicate name..."
expect_error "InvalidKeyPair.Duplicate" aws ec2 create-key-pair \
    --key-name test-key-1

# 8k: ImportKeyPair with duplicate name (test-key-1 exists from Phase 3)
echo "8k: ImportKeyPair duplicate name..."
expect_error "InvalidKeyPair.Duplicate" aws ec2 import-key-pair \
    --key-name test-key-1 --public-key-material "fileb://test-key-2-local.pub"

# 8l: ImportKeyPair with invalid key format
echo "8l: ImportKeyPair invalid key format..."
echo "not-a-valid-public-key" > /tmp/bad-key.pub
expect_error "InvalidKey.Format" aws ec2 import-key-pair \
    --key-name bad-format-key --public-key-material "fileb:///tmp/bad-key.pub"

# 8m: DescribeVolumes with non-existent volume ID
echo "8m: DescribeVolumes non-existent volume..."
expect_error "InvalidVolume.NotFound" aws ec2 describe-volumes \
    --volume-ids vol-0000000000000dead

# 8n: DescribeImages with non-existent AMI ID
echo "8n: DescribeImages non-existent AMI..."
expect_error "InvalidAMIID.NotFound" aws ec2 describe-images \
    --image-ids ami-0000000000000dead

# 8o: CreateImage with duplicate name (e2e-custom-ami exists from Phase 5e)
echo "8o: CreateImage duplicate name..."
expect_error "InvalidAMIName.Duplicate" aws ec2 create-image \
    --instance-id "$INSTANCE_ID" --name "e2e-custom-ami"

# 8p: DeleteKeyPair for non-existent key — should succeed (idempotent, matches AWS)
echo "8p: DeleteKeyPair non-existent key (idempotent)..."
aws ec2 delete-key-pair --key-name nonexistent-key-99999
echo "  DeleteKeyPair for non-existent key succeeded (idempotent)"

# 8q: ModifyInstanceAttribute on running instance (instance not in stopped KV → NotFound)
echo "8q: ModifyInstanceAttribute on running instance..."
expect_error "InvalidInstanceID.NotFound" aws ec2 modify-instance-attribute \
    --instance-id "$INSTANCE_ID" --instance-type "{\"Value\": \"$INSTANCE_TYPE\"}"

# 8r: Reboot non-existent instance
echo "8r: Reboot non-existent instance..."
expect_error "InvalidInstanceID.NotFound" aws ec2 reboot-instances --instance-ids "i-nonexistent"

echo "Negative test suite passed"

# =============================================================================
# IAM E2E Tests
# =============================================================================

# IAM Phase 1: User CRUD
echo ""
echo "IAM Phase 1: User CRUD"

# Root auth — verify list-users works (root user exists)
echo "  Verifying root auth via iam list-users..."
ROOT_USERS=$(aws iam list-users)
echo "$ROOT_USERS" | jq -e '.Users | length > 0' > /dev/null
echo "  Root auth verified"

# CreateUser — alice
echo "  Creating user alice..."
ALICE_OUTPUT=$(aws iam create-user --user-name alice)
echo "$ALICE_OUTPUT" | jq -e '.User.UserName == "alice"' > /dev/null
ALICE_ARN=$(echo "$ALICE_OUTPUT" | jq -r '.User.Arn')
echo "  Created alice: $ALICE_ARN"

# CreateUser — bob with path
echo "  Creating user bob with path /engineering/..."
BOB_OUTPUT=$(aws iam create-user --user-name bob --path /engineering/)
echo "$BOB_OUTPUT" | jq -e '.User.Path == "/engineering/"' > /dev/null
echo "  Created bob"

# CreateUser — duplicate (expect EntityAlreadyExists)
echo "  Creating duplicate user alice (expect error)..."
expect_error "EntityAlreadyExists" aws iam create-user --user-name alice

# GetUser
echo "  Getting user alice..."
aws iam get-user --user-name alice | jq -e '.User.UserName == "alice"' > /dev/null
echo "  GetUser alice passed"

# GetUser — not found
echo "  Getting nonexistent user (expect error)..."
expect_error "NoSuchEntity" aws iam get-user --user-name nonexistent

# ListUsers — should have root, alice, bob
echo "  Listing users..."
USER_COUNT=$(aws iam list-users | jq '.Users | length')
if [ "$USER_COUNT" -lt 3 ]; then
    echo "  ERROR: Expected at least 3 users (root, alice, bob), got $USER_COUNT"
    exit 1
fi
echo "  ListUsers: $USER_COUNT users"

# ListUsers with path-prefix
echo "  Listing users with path-prefix /engineering/..."
ENG_USERS=$(aws iam list-users --path-prefix /engineering/ | jq '.Users | length')
if [ "$ENG_USERS" -ne 1 ]; then
    echo "  ERROR: Expected 1 user with path /engineering/, got $ENG_USERS"
    exit 1
fi
echo "  Path-prefix filter passed"

echo "IAM Phase 1 passed"

# IAM Phase 2: Access Key Lifecycle
echo ""
echo "IAM Phase 2: Access Key Lifecycle"

# CreateAccessKey — alice key 1
echo "  Creating access key 1 for alice..."
KEY1=$(aws iam create-access-key --user-name alice)
ALICE_KEY_ID=$(echo "$KEY1" | jq -r '.AccessKey.AccessKeyId')
ALICE_SECRET=$(echo "$KEY1" | jq -r '.AccessKey.SecretAccessKey')
echo "  Key 1: $ALICE_KEY_ID"

if [ -z "$ALICE_KEY_ID" ] || [ "$ALICE_KEY_ID" == "null" ]; then
    echo "  ERROR: Failed to create access key for alice"
    exit 1
fi

# CreateAccessKey — alice key 2
echo "  Creating access key 2 for alice..."
KEY2=$(aws iam create-access-key --user-name alice)
ALICE_KEY2_ID=$(echo "$KEY2" | jq -r '.AccessKey.AccessKeyId')
echo "  Key 2: $ALICE_KEY2_ID"

# CreateAccessKey — alice key 3 (exceed limit)
echo "  Creating access key 3 for alice (expect LimitExceeded)..."
expect_error "LimitExceeded" aws iam create-access-key --user-name alice

# CreateAccessKey — non-existent user
echo "  Creating access key for ghost (expect error)..."
expect_error "NoSuchEntity" aws iam create-access-key --user-name ghost

# ListAccessKeys
echo "  Listing access keys for alice..."
ALICE_KEY_COUNT=$(aws iam list-access-keys --user-name alice | jq '.AccessKeyMetadata | length')
if [ "$ALICE_KEY_COUNT" -ne 2 ]; then
    echo "  ERROR: Expected 2 keys for alice, got $ALICE_KEY_COUNT"
    exit 1
fi
echo "  Alice has $ALICE_KEY_COUNT keys"

echo "  Listing access keys for bob (expect 0)..."
BOB_KEY_COUNT=$(aws iam list-access-keys --user-name bob | jq '.AccessKeyMetadata // [] | length')
if [ "${BOB_KEY_COUNT:-0}" -ne 0 ]; then
    echo "  ERROR: Expected 0 keys for bob, got $BOB_KEY_COUNT"
    exit 1
fi
echo "  Bob has 0 keys"

# UpdateAccessKey — deactivate
echo "  Deactivating alice key 1..."
aws iam update-access-key --user-name alice --access-key-id "$ALICE_KEY_ID" --status Inactive
STATUS=$(aws iam list-access-keys --user-name alice | \
    jq -r ".AccessKeyMetadata[] | select(.AccessKeyId == \"$ALICE_KEY_ID\") | .Status")
if [ "$STATUS" != "Inactive" ]; then
    echo "  ERROR: Expected Inactive, got $STATUS"
    exit 1
fi
echo "  Key deactivated"

# UpdateAccessKey — reactivate
echo "  Reactivating alice key 1..."
aws iam update-access-key --user-name alice --access-key-id "$ALICE_KEY_ID" --status Active
echo "  Key reactivated"

# DeleteAccessKey — key 2
echo "  Deleting alice key 2..."
aws iam delete-access-key --user-name alice --access-key-id "$ALICE_KEY2_ID"
ALICE_KEY_COUNT=$(aws iam list-access-keys --user-name alice | jq '.AccessKeyMetadata | length')
if [ "$ALICE_KEY_COUNT" -ne 1 ]; then
    echo "  ERROR: Expected 1 key after delete, got $ALICE_KEY_COUNT"
    exit 1
fi
echo "  Key 2 deleted, alice has $ALICE_KEY_COUNT key"

echo "IAM Phase 2 passed"

# IAM Phase 3: User Authentication
echo ""
echo "IAM Phase 3: User Authentication"

# Configure alice profile
echo "  Configuring spx-alice profile..."
setup_test_profile spx-alice "$ALICE_KEY_ID" "$ALICE_SECRET"

# Deactivate key → auth should fail
echo "  Deactivating alice key, verifying auth rejection..."
aws iam update-access-key --user-name alice --access-key-id "$ALICE_KEY_ID" --status Inactive
expect_error "InvalidClientTokenId" \
    aws ec2 describe-instances --profile spx-alice
echo "  Inactive key correctly rejected"

# Reactivate key
echo "  Reactivating alice key..."
aws iam update-access-key --user-name alice --access-key-id "$ALICE_KEY_ID" --status Active

# Bad secret → SignatureDoesNotMatch
echo "  Testing bad secret (expect SignatureDoesNotMatch)..."
setup_test_profile spx-bad "$ALICE_KEY_ID" "WRONG_SECRET_KEY_HERE_12345678901"
expect_error "SignatureDoesNotMatch" \
    aws ec2 describe-instances --profile spx-bad

# Non-existent key ID → InvalidClientTokenId
echo "  Testing fake key ID (expect InvalidClientTokenId)..."
setup_test_profile spx-fake "AKIAXXXXXXXXXXXXXXXX" "doesntmatter"
expect_error "InvalidClientTokenId" \
    aws ec2 describe-instances --profile spx-fake

# Multi-user auth — create bob key and verify both auth
echo "  Creating access key for bob..."
BOB_KEY=$(aws iam create-access-key --user-name bob)
BOB_KEY_ID=$(echo "$BOB_KEY" | jq -r '.AccessKey.AccessKeyId')
BOB_SECRET=$(echo "$BOB_KEY" | jq -r '.AccessKey.SecretAccessKey')
setup_test_profile spx-bob "$BOB_KEY_ID" "$BOB_SECRET"

# Root still works
echo "  Verifying root auth..."
aws ec2 describe-instances > /dev/null
echo "  Root auth OK"

echo "IAM Phase 3 passed"

# IAM Phase 4: Policy CRUD
echo ""
echo "IAM Phase 4: Policy CRUD"

# Get the admin account ID from the current profile
POLICY_OUTPUT=$(aws iam create-policy \
    --policy-name EC2ReadOnly \
    --policy-document '{
        "Version": "2012-10-17",
        "Statement": [{
            "Effect": "Allow",
            "Action": ["ec2:DescribeInstances", "ec2:DescribeVolumes", "ec2:DescribeVpcs"],
            "Resource": "*"
        }]
    }')
ADMIN_ACCOUNT=$(echo "$POLICY_OUTPUT" | jq -r '.Policy.Arn' | cut -d: -f5)
if [ -z "$ADMIN_ACCOUNT" ]; then
    echo "  ERROR: Failed to extract account ID from CreatePolicy response"
    exit 1
fi
echo "  Created EC2ReadOnly (account=$ADMIN_ACCOUNT)"

# CreatePolicy — FullAdmin
echo "  Creating FullAdmin policy..."
aws iam create-policy \
    --policy-name FullAdmin \
    --path /admin/ \
    --description "Full access to all services" \
    --policy-document '{
        "Version": "2012-10-17",
        "Statement": [{
            "Effect": "Allow",
            "Action": "*",
            "Resource": "*"
        }]
    }' > /dev/null
echo "  Created FullAdmin"

# CreatePolicy — DenyTerminate (mixed Allow + Deny)
echo "  Creating DenyTerminate policy..."
aws iam create-policy \
    --policy-name DenyTerminate \
    --policy-document '{
        "Version": "2012-10-17",
        "Statement": [
            {"Effect": "Allow", "Action": "ec2:*", "Resource": "*"},
            {"Effect": "Deny", "Action": "ec2:TerminateInstances", "Resource": "*"}
        ]
    }' > /dev/null
echo "  Created DenyTerminate"

# CreatePolicy — IAMReadOnly
echo "  Creating IAMReadOnly policy..."
aws iam create-policy \
    --policy-name IAMReadOnly \
    --policy-document '{
        "Version": "2012-10-17",
        "Statement": [{
            "Effect": "Allow",
            "Action": ["iam:GetUser", "iam:ListUsers", "iam:ListPolicies", "iam:GetPolicy"],
            "Resource": "*"
        }]
    }' > /dev/null
echo "  Created IAMReadOnly"

# CreatePolicy — EC2DescribeAll (wildcard)
echo "  Creating EC2DescribeAll policy..."
aws iam create-policy \
    --policy-name EC2DescribeAll \
    --policy-document '{
        "Version": "2012-10-17",
        "Statement": [{
            "Effect": "Allow",
            "Action": "ec2:Describe*",
            "Resource": "*"
        }]
    }' > /dev/null
echo "  Created EC2DescribeAll"

# CreatePolicy — duplicate (expect EntityAlreadyExists)
echo "  Creating duplicate EC2ReadOnly (expect error)..."
expect_error "EntityAlreadyExists" aws iam create-policy --policy-name EC2ReadOnly \
    --policy-document '{"Version":"2012-10-17","Statement":[{"Effect":"Allow","Action":"*","Resource":"*"}]}'

# CreatePolicy — malformed JSON
echo "  Creating policy with malformed JSON (expect error)..."
expect_error "MalformedPolicyDocument" aws iam create-policy --policy-name BadPolicy \
    --policy-document '{"not valid"}'

# GetPolicy
echo "  Getting EC2ReadOnly policy..."
aws iam get-policy \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly" | \
    jq -e '.Policy.PolicyName == "EC2ReadOnly"' > /dev/null
echo "  GetPolicy passed"

# GetPolicy — not found
echo "  Getting non-existent policy (expect error)..."
expect_error "NoSuchEntity" aws iam get-policy \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/Ghost"

# GetPolicyVersion
echo "  Getting EC2ReadOnly policy version v1..."
aws iam get-policy-version \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly" \
    --version-id v1 | jq -e '.PolicyVersion.VersionId == "v1"' > /dev/null
echo "  GetPolicyVersion passed"

# ListPolicies
echo "  Listing policies..."
POLICY_COUNT=$(aws iam list-policies | jq '.Policies | length')
if [ "$POLICY_COUNT" -lt 5 ]; then
    echo "  ERROR: Expected at least 5 policies, got $POLICY_COUNT"
    exit 1
fi
echo "  ListPolicies: $POLICY_COUNT policies"

echo "IAM Phase 4 passed"

# IAM Phase 5: Policy Attachment & Enforcement
echo ""
echo "IAM Phase 5: Policy Attachment & Enforcement"

# Create charlie with key
echo "  Creating user charlie with access key..."
aws iam create-user --user-name charlie > /dev/null
CHARLIE_KEY=$(aws iam create-access-key --user-name charlie)
CHARLIE_KEY_ID=$(echo "$CHARLIE_KEY" | jq -r '.AccessKey.AccessKeyId')
CHARLIE_SECRET=$(echo "$CHARLIE_KEY" | jq -r '.AccessKey.SecretAccessKey')
setup_test_profile spx-charlie "$CHARLIE_KEY_ID" "$CHARLIE_SECRET"

# Attach policies
echo "  Attaching EC2ReadOnly + IAMReadOnly to alice..."
aws iam attach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly"
aws iam attach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/IAMReadOnly"

echo "  Attaching DenyTerminate to bob..."
aws iam attach-user-policy --user-name bob \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/DenyTerminate"

# ListAttachedUserPolicies
echo "  Verifying alice's attached policies..."
ALICE_POLICIES=$(aws iam list-attached-user-policies --user-name alice | jq '.AttachedPolicies | length')
if [ "$ALICE_POLICIES" -ne 2 ]; then
    echo "  ERROR: Expected 2 policies for alice, got $ALICE_POLICIES"
    exit 1
fi
echo "  Alice has $ALICE_POLICIES policies"

# Idempotent attach
echo "  Testing idempotent attach..."
aws iam attach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly"
ALICE_POLICIES=$(aws iam list-attached-user-policies --user-name alice | jq '.AttachedPolicies | length')
if [ "$ALICE_POLICIES" -ne 2 ]; then
    echo "  ERROR: Expected 2 policies after idempotent attach, got $ALICE_POLICIES"
    exit 1
fi
echo "  Idempotent attach passed"

# Attach edge cases
echo "  Attaching non-existent policy (expect error)..."
expect_error "NoSuchEntity" aws iam attach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/Ghost"

echo "  Attaching to non-existent user (expect error)..."
expect_error "NoSuchEntity" aws iam attach-user-policy --user-name ghost \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly"

# --- Enforcement Tests ---

# Default Deny — charlie has no policies
echo "  Testing default deny (charlie, no policies)..."
expect_error "AccessDenied" \
    aws ec2 describe-instances --profile spx-charlie
expect_error "AccessDenied" \
    aws iam list-users --profile spx-charlie
echo "  Default deny passed"

# Explicit Allow — alice has EC2ReadOnly + IAMReadOnly
echo "  Testing explicit allow (alice, EC2ReadOnly + IAMReadOnly)..."
aws ec2 describe-instances --profile spx-alice > /dev/null
echo "    ec2:DescribeInstances — allowed"
aws ec2 describe-vpcs --profile spx-alice > /dev/null
echo "    ec2:DescribeVpcs — allowed"
aws iam list-users --profile spx-alice > /dev/null
echo "    iam:ListUsers — allowed"

# Actions NOT in alice's policies → denied
expect_error "AccessDenied" \
    aws ec2 describe-key-pairs --profile spx-alice
echo "    ec2:DescribeKeyPairs — denied (not in policy)"
expect_error "AccessDenied" \
    aws iam create-user --user-name hack --profile spx-alice
echo "    iam:CreateUser — denied (not in policy)"
echo "  Explicit allow passed"

# Wildcard Allow with Explicit Deny — bob has DenyTerminate (ec2:* Allow + ec2:TerminateInstances Deny)
echo "  Testing deny override (bob, DenyTerminate)..."
aws ec2 describe-instances --profile spx-bob > /dev/null
echo "    ec2:DescribeInstances — allowed (ec2:* wildcard)"
aws ec2 describe-key-pairs --profile spx-bob > /dev/null
echo "    ec2:DescribeKeyPairs — allowed (ec2:* wildcard)"
expect_error "AccessDenied" \
    aws ec2 terminate-instances --instance-ids i-fake --profile spx-bob
echo "    ec2:TerminateInstances — denied (explicit Deny overrides Allow)"
expect_error "AccessDenied" \
    aws iam list-users --profile spx-bob
echo "    iam:ListUsers — denied (IAM not covered by ec2:*)"
echo "  Deny override passed"

# Root user bypass
echo "  Testing root user bypass..."
aws ec2 describe-instances > /dev/null
aws iam list-users > /dev/null
aws iam create-user --user-name temp > /dev/null
aws iam delete-user --user-name temp > /dev/null
echo "  Root bypass passed"

# Prefix wildcard — swap alice to EC2DescribeAll
echo "  Testing prefix wildcard (swap alice to EC2DescribeAll)..."
aws iam detach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly"
aws iam detach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/IAMReadOnly"
aws iam attach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2DescribeAll"

aws ec2 describe-instances --profile spx-alice > /dev/null
echo "    ec2:DescribeInstances — allowed (Describe*)"
aws ec2 describe-key-pairs --profile spx-alice > /dev/null
echo "    ec2:DescribeKeyPairs — allowed (Describe*)"
expect_error "AccessDenied" \
    aws ec2 create-key-pair --key-name x --profile spx-alice
echo "    ec2:CreateKeyPair — denied (not Describe*)"
expect_error "AccessDenied" \
    aws iam list-users --profile spx-alice
echo "    iam:ListUsers — denied (not ec2:Describe*)"
echo "  Prefix wildcard passed"

# FullAdmin — give charlie full access
echo "  Testing FullAdmin (charlie)..."
aws iam attach-user-policy --user-name charlie \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/admin/FullAdmin"
aws ec2 describe-instances --profile spx-charlie > /dev/null
echo "    ec2:DescribeInstances — allowed (was denied)"
aws iam list-users --profile spx-charlie > /dev/null
echo "    iam:ListUsers — allowed (was denied)"
echo "  FullAdmin passed"

echo "IAM Phase 5 passed"

# IAM Phase 6: Policy Lifecycle — Detach & Delete
echo ""
echo "IAM Phase 6: Policy Lifecycle — Detach & Delete"

# Detach alice's policy → she loses access
echo "  Detaching EC2DescribeAll from alice..."
aws iam detach-user-policy --user-name alice \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2DescribeAll"
expect_error "AccessDenied" \
    aws ec2 describe-instances --profile spx-alice
echo "  Alice lost access after detach"

# DeletePolicy — conflict (DenyTerminate still attached to bob)
echo "  Deleting DenyTerminate while attached (expect DeleteConflict)..."
expect_error "DeleteConflict" aws iam delete-policy \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/DenyTerminate"

# Detach first, then delete
echo "  Detaching DenyTerminate from bob, then deleting..."
aws iam detach-user-policy --user-name bob \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/DenyTerminate"
aws iam delete-policy \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/DenyTerminate"

# Verify it's gone
expect_error "NoSuchEntity" aws iam get-policy \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/DenyTerminate"
echo "  DenyTerminate deleted"

echo "IAM Phase 6 passed"

# IAM Phase 7: Cleanup
echo ""
echo "IAM Phase 7: IAM Cleanup"

# Delete alice (detach remaining, delete key, delete user)
echo "  Cleaning up alice..."
aws iam delete-access-key --user-name alice --access-key-id "$ALICE_KEY_ID"
aws iam delete-user --user-name alice

# Delete bob
echo "  Cleaning up bob..."
aws iam delete-access-key --user-name bob --access-key-id "$BOB_KEY_ID"
aws iam delete-user --user-name bob

# Delete charlie (detach FullAdmin first)
echo "  Cleaning up charlie..."
aws iam detach-user-policy --user-name charlie \
    --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/admin/FullAdmin"
aws iam delete-access-key --user-name charlie --access-key-id "$CHARLIE_KEY_ID"
aws iam delete-user --user-name charlie

# Verify only root remains
FINAL_USER_COUNT=$(aws iam list-users | jq '.Users | length')
if [ "$FINAL_USER_COUNT" -ne 1 ]; then
    echo "  ERROR: Expected 1 user (root) after cleanup, got $FINAL_USER_COUNT"
    exit 1
fi
echo "  Users cleaned up (root only)"

# Delete remaining policies (including bootstrap AdministratorAccess)
echo "  Cleaning up policies..."
aws iam delete-policy --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2ReadOnly"
aws iam delete-policy --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/admin/FullAdmin"
aws iam delete-policy --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/IAMReadOnly"
aws iam delete-policy --policy-arn "arn:aws:iam::${ADMIN_ACCOUNT}:policy/EC2DescribeAll"
# AdministratorAccess stays attached to admin — detaching it would revoke
# admin's own permissions and block the delete (account root bypass not yet implemented).

FINAL_POLICY_COUNT=$(aws iam list-policies | jq '.Policies | length')
if [ "$FINAL_POLICY_COUNT" -ne 1 ]; then
    echo "  ERROR: Expected 1 policy (AdministratorAccess) after cleanup, got $FINAL_POLICY_COUNT"
    exit 1
fi
echo "  Policies cleaned up"

echo "IAM Phase 7 passed"

# IAM Phase 8: Roles & Instance Profiles (CRUD + lifecycle guards)
# Runs against the admin root profile after Phase 7 cleanup, so the only
# pre-existing policy is bootstrap AdministratorAccess.
echo ""
echo "IAM Phase 8: Roles & Instance Profiles"

ROLE_NAME="app-role"
PROFILE_NAME="app-profile"
OTHER_PROFILE_NAME="other-profile"
ADMIN_POLICY_ARN="arn:aws:iam::${ADMIN_ACCOUNT}:policy/AdministratorAccess"
ROLE_ARN="arn:aws:iam::${ADMIN_ACCOUNT}:role/${ROLE_NAME}"

TRUST_POLICY_DOC='{"Version":"2012-10-17","Statement":[{"Effect":"Allow","Principal":{"Service":"ec2.amazonaws.com"},"Action":"sts:AssumeRole"}]}'
TRUST_POLICY_V2_DOC='{"Version":"2012-10-17","Statement":[{"Sid":"v2","Effect":"Allow","Principal":{"Service":"ec2.amazonaws.com"},"Action":"sts:AssumeRole"}]}'

# CreateRole — valid trust policy
echo "  Creating role ${ROLE_NAME}..."
ROLE_OUT=$(aws iam create-role --role-name "${ROLE_NAME}" \
    --assume-role-policy-document "${TRUST_POLICY_DOC}" \
    --description "E2E test role")
echo "${ROLE_OUT}" | jq -e ".Role.RoleName == \"${ROLE_NAME}\"" > /dev/null
echo "${ROLE_OUT}" | jq -e ".Role.Arn == \"${ROLE_ARN}\"" > /dev/null
echo "  Created role: ${ROLE_ARN}"

# CreateRole — duplicate
echo "  Creating duplicate role (expect EntityAlreadyExists)..."
expect_error "EntityAlreadyExists" aws iam create-role \
    --role-name "${ROLE_NAME}" --assume-role-policy-document "${TRUST_POLICY_DOC}"

# CreateRole — malformed trust policy
echo "  Creating role with malformed trust policy (expect MalformedPolicyDocument)..."
expect_error "MalformedPolicyDocument" aws iam create-role \
    --role-name "bad-role" --assume-role-policy-document '{not valid json'

# GetRole
echo "  Getting role ${ROLE_NAME}..."
aws iam get-role --role-name "${ROLE_NAME}" \
    | jq -e ".Role.RoleName == \"${ROLE_NAME}\"" > /dev/null

# GetRole — missing
expect_error "NoSuchEntity" aws iam get-role --role-name "ghost-role"

# ListRoles (>= 1)
ROLE_COUNT=$(aws iam list-roles | jq '.Roles | length')
if [ "${ROLE_COUNT}" -lt 1 ]; then
    echo "  ERROR: Expected >= 1 role, got ${ROLE_COUNT}"
    exit 1
fi

# ListRoles with path-prefix
aws iam list-roles --path-prefix / | jq -e '.Roles | length >= 1' > /dev/null

# UpdateRole — description + max-session-duration
echo "  Updating role description and max-session-duration..."
aws iam update-role --role-name "${ROLE_NAME}" \
    --description "updated" --max-session-duration 7200
UPDATED_DESC=$(aws iam get-role --role-name "${ROLE_NAME}" | jq -r '.Role.Description')
if [ "${UPDATED_DESC}" != "updated" ]; then
    echo "  ERROR: Expected description 'updated', got '${UPDATED_DESC}'"
    exit 1
fi

# UpdateRole — out-of-range MaxSessionDuration is enforced by the AWS CLI
# client-side (min 3600) before the request leaves the host. Server-side
# range validation (900-43200) is exercised in handlers/iam/roles_test.go.

# UpdateAssumeRolePolicy
echo "  Updating trust policy..."
aws iam update-assume-role-policy --role-name "${ROLE_NAME}" \
    --policy-document "${TRUST_POLICY_V2_DOC}"

# AttachRolePolicy + ListAttachedRolePolicies
echo "  Attaching AdministratorAccess to ${ROLE_NAME}..."
aws iam attach-role-policy --role-name "${ROLE_NAME}" --policy-arn "${ADMIN_POLICY_ARN}"
ATTACHED=$(aws iam list-attached-role-policies --role-name "${ROLE_NAME}" \
    | jq '.AttachedPolicies | length')
if [ "${ATTACHED}" -ne 1 ]; then
    echo "  ERROR: Expected 1 attached policy, got ${ATTACHED}"
    exit 1
fi

# Idempotent re-attach
aws iam attach-role-policy --role-name "${ROLE_NAME}" --policy-arn "${ADMIN_POLICY_ARN}"
RE_ATTACHED=$(aws iam list-attached-role-policies --role-name "${ROLE_NAME}" \
    | jq '.AttachedPolicies | length')
if [ "${RE_ATTACHED}" -ne 1 ]; then
    echo "  ERROR: Idempotent re-attach grew count to ${RE_ATTACHED}"
    exit 1
fi

# CreateInstanceProfile — two profiles so Replace has a target in Phase 9
echo "  Creating instance profile ${PROFILE_NAME}..."
aws iam create-instance-profile --instance-profile-name "${PROFILE_NAME}" \
    | jq -e ".InstanceProfile.InstanceProfileName == \"${PROFILE_NAME}\"" > /dev/null

echo "  Creating instance profile ${OTHER_PROFILE_NAME}..."
aws iam create-instance-profile --instance-profile-name "${OTHER_PROFILE_NAME}" > /dev/null

# CreateInstanceProfile — duplicate
expect_error "EntityAlreadyExists" aws iam create-instance-profile \
    --instance-profile-name "${PROFILE_NAME}"

# GetInstanceProfile / ListInstanceProfiles
aws iam get-instance-profile --instance-profile-name "${PROFILE_NAME}" \
    | jq -e ".InstanceProfile.InstanceProfileName == \"${PROFILE_NAME}\"" > /dev/null
aws iam list-instance-profiles | jq -e '.InstanceProfiles | length >= 2' > /dev/null

# AddRoleToInstanceProfile
echo "  Adding ${ROLE_NAME} to ${PROFILE_NAME}..."
aws iam add-role-to-instance-profile \
    --instance-profile-name "${PROFILE_NAME}" --role-name "${ROLE_NAME}"

# AddRoleToInstanceProfile — second role rejected (one-role limit)
expect_error "LimitExceeded" aws iam add-role-to-instance-profile \
    --instance-profile-name "${PROFILE_NAME}" --role-name "${ROLE_NAME}"

# ListInstanceProfilesForRole — reverse lookup
PROFILES_FOR_ROLE=$(aws iam list-instance-profiles-for-role --role-name "${ROLE_NAME}" \
    | jq '.InstanceProfiles | length')
if [ "${PROFILES_FOR_ROLE}" -ne 1 ]; then
    echo "  ERROR: Expected 1 profile for role, got ${PROFILES_FOR_ROLE}"
    exit 1
fi

# DeleteRole — refused while attached policies + still in profile
expect_error "DeleteConflict" aws iam delete-role --role-name "${ROLE_NAME}"

# DeleteInstanceProfile — refused while role attached
expect_error "DeleteConflict" aws iam delete-instance-profile \
    --instance-profile-name "${PROFILE_NAME}"

# Add role to OTHER_PROFILE_NAME so Phase 9 has a Replace target
aws iam add-role-to-instance-profile \
    --instance-profile-name "${OTHER_PROFILE_NAME}" --role-name "${ROLE_NAME}"

echo "IAM Phase 8 passed"

# IAM Phase 9: EC2 IAM Instance Profile Association
# Uses the long-lived
# singleton $INSTANCE_ID for the Associate/Disassociate/Replace lifecycle,
# then a dedicated short-lived VM to exercise auto-disassociate on terminate.
echo ""
echo "IAM Phase 9: EC2 IAM Instance Profile Association"

# Sanity: singleton must still be running.
SINGLETON_STATE=$(aws ec2 describe-instances --instance-ids "${INSTANCE_ID}" \
    --query 'Reservations[0].Instances[0].State.Name' --output text)
if [ "${SINGLETON_STATE}" != "running" ]; then
    echo "  ERROR: Expected singleton ${INSTANCE_ID} running, got ${SINGLETON_STATE}"
    exit 1
fi

# Associate-iam-instance-profile (post-launch)
echo "  Associating ${PROFILE_NAME} -> ${INSTANCE_ID}..."
ASSOC_OUT=$(aws ec2 associate-iam-instance-profile \
    --instance-id "${INSTANCE_ID}" \
    --iam-instance-profile "Name=${PROFILE_NAME}")
ASSOC_ID=$(echo "${ASSOC_OUT}" | jq -r '.IamInstanceProfileAssociation.AssociationId')
if [[ ! "${ASSOC_ID}" =~ ^iip-assoc- ]]; then
    echo "  ERROR: AssociationId malformed: ${ASSOC_ID}"
    exit 1
fi
echo "  Got ${ASSOC_ID}"

# Associate again — already associated
expect_error "IamInstanceProfileAlreadyAssociated" aws ec2 associate-iam-instance-profile \
    --instance-id "${INSTANCE_ID}" --iam-instance-profile "Name=${PROFILE_NAME}"

# DescribeInstances surfaces IamInstanceProfile
PROFILE_ARN_FROM_DESC=$(aws ec2 describe-instances --instance-ids "${INSTANCE_ID}" \
    --query 'Reservations[0].Instances[0].IamInstanceProfile.Arn' --output text)
if [[ "${PROFILE_ARN_FROM_DESC}" != *":instance-profile/${PROFILE_NAME}" ]]; then
    echo "  ERROR: describe-instances IamInstanceProfile.Arn = '${PROFILE_ARN_FROM_DESC}'"
    exit 1
fi

# DescribeIamInstanceProfileAssociations
DESC_OUT=$(aws ec2 describe-iam-instance-profile-associations \
    --association-ids "${ASSOC_ID}")
echo "${DESC_OUT}" | jq -e ".IamInstanceProfileAssociations[0].InstanceId == \"${INSTANCE_ID}\"" > /dev/null

# DeleteInstanceProfile while in-use by a live instance — refused
expect_error "DeleteConflict" aws iam delete-instance-profile \
    --instance-profile-name "${PROFILE_NAME}"

# Replace association → other-profile (yields a fresh association id)
echo "  Replacing association -> ${OTHER_PROFILE_NAME}..."
REPLACE_OUT=$(aws ec2 replace-iam-instance-profile-association \
    --association-id "${ASSOC_ID}" \
    --iam-instance-profile "Name=${OTHER_PROFILE_NAME}")
NEW_ASSOC_ID=$(echo "${REPLACE_OUT}" | jq -r '.IamInstanceProfileAssociation.AssociationId')
if [ "${NEW_ASSOC_ID}" = "${ASSOC_ID}" ] || [[ ! "${NEW_ASSOC_ID}" =~ ^iip-assoc- ]]; then
    echo "  ERROR: Replace must mint a new AssociationId (old=${ASSOC_ID}, new=${NEW_ASSOC_ID})"
    exit 1
fi

# Replace with stale id
expect_error "NoSuchAssociation" aws ec2 replace-iam-instance-profile-association \
    --association-id "${ASSOC_ID}" --iam-instance-profile "Name=${PROFILE_NAME}"

# Disassociate via the current (new) id
echo "  Disassociating ${NEW_ASSOC_ID}..."
aws ec2 disassociate-iam-instance-profile --association-id "${NEW_ASSOC_ID}" > /dev/null

# Disassociate again with stale id
expect_error "NoSuchAssociation" aws ec2 disassociate-iam-instance-profile \
    --association-id "${NEW_ASSOC_ID}"

# DescribeInstances no longer carries the profile after Disassociate.
# AWS CLI --output text prints "None" when the field is null.
POST_PROFILE=$(aws ec2 describe-instances --instance-ids "${INSTANCE_ID}" \
    --query 'Reservations[0].Instances[0].IamInstanceProfile.Arn' --output text)
if [ "${POST_PROFILE}" != "None" ]; then
    echo "  ERROR: IamInstanceProfile.Arn still set after disassociate: '${POST_PROFILE}'"
    exit 1
fi

# RunInstances --iam-instance-profile at launch + auto-disassociate on terminate.
# Reuse the AMI/type/key/subnet/SG the singleton was launched against in one
# describe-instances round trip.
EPH_DESC=$(aws ec2 describe-instances --instance-ids "${INSTANCE_ID}" \
    --query 'Reservations[0].Instances[0].[ImageId,InstanceType,KeyName,SubnetId,SecurityGroups[0].GroupId]' \
    --output text)
EPH_AMI=$(echo "${EPH_DESC}" | awk '{print $1}')
EPH_TYPE=$(echo "${EPH_DESC}" | awk '{print $2}')
EPH_KEY=$(echo "${EPH_DESC}" | awk '{print $3}')
EPH_SUBNET=$(echo "${EPH_DESC}" | awk '{print $4}')
EPH_SG=$(echo "${EPH_DESC}" | awk '{print $5}')

echo "  Launching ephemeral VM with --iam-instance-profile ${PROFILE_NAME}..."
EPH_RUN=$(aws ec2 run-instances \
    --image-id "${EPH_AMI}" --instance-type "${EPH_TYPE}" \
    --key-name "${EPH_KEY}" --subnet-id "${EPH_SUBNET}" \
    --security-group-ids "${EPH_SG}" \
    --iam-instance-profile "Name=${PROFILE_NAME}" \
    --count 1)
EPH_ID=$(echo "${EPH_RUN}" | jq -r '.Instances[0].InstanceId')
if [[ ! "${EPH_ID}" =~ ^i- ]]; then
    echo "  ERROR: Failed to launch ephemeral VM (got '${EPH_ID}')"
    exit 1
fi
echo "  Ephemeral VM: ${EPH_ID}"

# Poll until running so DescribeInstances surfaces a stable profile field.
for i in $(seq 1 60); do
    EPH_STATE=$(aws ec2 describe-instances --instance-ids "${EPH_ID}" \
        --query 'Reservations[0].Instances[0].State.Name' --output text)
    if [ "${EPH_STATE}" = "running" ]; then break; fi
    sleep 2
done
if [ "${EPH_STATE}" != "running" ]; then
    echo "  ERROR: Ephemeral VM never reached running (last=${EPH_STATE})"
    aws ec2 terminate-instances --instance-ids "${EPH_ID}" > /dev/null || true
    exit 1
fi

EPH_ASSOC_ID=$(aws ec2 describe-iam-instance-profile-associations \
    --filters "Name=instance-id,Values=${EPH_ID}" \
    --query 'IamInstanceProfileAssociations[0].AssociationId' --output text)
if [[ ! "${EPH_ASSOC_ID}" =~ ^iip-assoc- ]]; then
    echo "  ERROR: ephemeral VM has no association (got '${EPH_ASSOC_ID}')"
    aws ec2 terminate-instances --instance-ids "${EPH_ID}" > /dev/null || true
    exit 1
fi

# Terminate → auto-disassociate
echo "  Terminating ${EPH_ID} (expect auto-disassociate)..."
aws ec2 terminate-instances --instance-ids "${EPH_ID}" > /dev/null
for i in $(seq 1 60); do
    EPH_STATE=$(aws ec2 describe-instances --instance-ids "${EPH_ID}" \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "gone")
    if [ "${EPH_STATE}" = "terminated" ] || [ "${EPH_STATE}" = "gone" ]; then break; fi
    sleep 2
done

# Auto-disassociate is flushed from the daemon's terminate handler — wait
# until the binding is cleared (up to 30s) so the NoSuchAssociation assertion
# is deterministic. Matches the Eventually(30s, 1s) loop in the Go port.
AUTO_DISASSOC_OK=0
for i in $(seq 1 30); do
    if aws ec2 disassociate-iam-instance-profile --association-id "${EPH_ASSOC_ID}" 2>&1 \
            | grep -q "NoSuchAssociation"; then
        AUTO_DISASSOC_OK=1
        break
    fi
    sleep 1
done
if [ "${AUTO_DISASSOC_OK}" -ne 1 ]; then
    echo "  ERROR: ${EPH_ASSOC_ID} never auto-disassociated after terminate"
    exit 1
fi
echo "  Auto-disassociated ${EPH_ASSOC_ID}"

# Cleanup: profiles + role + policy. Each step is best-effort so a partial
# failure further up doesn't cascade — matches IAM Phase 7 style.
aws iam remove-role-from-instance-profile \
    --instance-profile-name "${PROFILE_NAME}" --role-name "${ROLE_NAME}" || true
aws iam remove-role-from-instance-profile \
    --instance-profile-name "${OTHER_PROFILE_NAME}" --role-name "${ROLE_NAME}" || true
aws iam delete-instance-profile --instance-profile-name "${PROFILE_NAME}" || true
aws iam delete-instance-profile --instance-profile-name "${OTHER_PROFILE_NAME}" || true
aws iam detach-role-policy --role-name "${ROLE_NAME}" --policy-arn "${ADMIN_POLICY_ARN}" || true
aws iam delete-role --role-name "${ROLE_NAME}" || true

# Verify role gone
expect_error "NoSuchEntity" aws iam get-role --role-name "${ROLE_NAME}"

echo "IAM Phase 9 passed"
echo ""
echo "IAM E2E Tests Completed Successfully"

# =============================================================================
# Phase 8: EC2 Account Scoping
# =============================================================================
# Tests that EC2 resources (instances, volumes, key pairs, snapshots, VPCs,
# IGWs, EIGWs) are properly isolated between tenant accounts.
# Based on: docs/development/feature/iam-phase4-e2e-test-guide.md
# Skips: Section 6 (CreateImage — mulga-612), Tags on instances (mulga-613)
echo ""
echo "Phase 8: EC2 Account Scoping"
echo "========================================"

# --- Step 1: Account Setup ---
echo ""
echo "Phase 8 Step 1: Account Setup"
echo "----------------------------------------"

echo "  Creating Team Alpha account..."
ALPHA_OUTPUT=$(spx admin account create --name "Team Alpha" 2>&1)
echo "$ALPHA_OUTPUT"
ALPHA_ACCOUNT=$(echo "$ALPHA_OUTPUT" | grep "Account ID:" | awk '{print $NF}')
ALPHA_KEY_ID=$(echo "$ALPHA_OUTPUT" | grep "Access Key ID:" | awk '{print $NF}')
ALPHA_SECRET=$(echo "$ALPHA_OUTPUT" | grep "Secret Access Key:" | awk '{print $NF}')

if [ -z "$ALPHA_ACCOUNT" ] || [ -z "$ALPHA_KEY_ID" ]; then
    echo "  ERROR: Failed to parse Team Alpha account output"
    exit 1
fi
echo "  Team Alpha: account=$ALPHA_ACCOUNT key=$ALPHA_KEY_ID"
setup_test_profile spx-team-alpha "$ALPHA_KEY_ID" "$ALPHA_SECRET"

echo "  Creating Team Beta account..."
BETA_OUTPUT=$(spx admin account create --name "Team Beta" 2>&1)
echo "$BETA_OUTPUT"
BETA_ACCOUNT=$(echo "$BETA_OUTPUT" | grep "Account ID:" | awk '{print $NF}')
BETA_KEY_ID=$(echo "$BETA_OUTPUT" | grep "Access Key ID:" | awk '{print $NF}')
BETA_SECRET=$(echo "$BETA_OUTPUT" | grep "Secret Access Key:" | awk '{print $NF}')

if [ -z "$BETA_ACCOUNT" ] || [ -z "$BETA_KEY_ID" ]; then
    echo "  ERROR: Failed to parse Team Beta account output"
    exit 1
fi
echo "  Team Beta: account=$BETA_ACCOUNT key=$BETA_KEY_ID"
setup_test_profile spx-team-beta "$BETA_KEY_ID" "$BETA_SECRET"

# Verify auth
aws ec2 describe-instances --profile spx-team-alpha > /dev/null
echo "  Alpha auth OK"
aws ec2 describe-instances --profile spx-team-beta > /dev/null
echo "  Beta auth OK"

echo "  Account setup complete"

# --- Step 2: Instance Scoping ---
echo ""
echo "Phase 8 Step 2: Instance Scoping"
echo "----------------------------------------"

# Create per-account key pairs (key pairs are account-scoped, root's test-key-1 is invisible)
aws ec2 create-key-pair --key-name alpha-instance-key --profile spx-team-alpha > /dev/null
aws ec2 create-key-pair --key-name beta-instance-key --profile spx-team-beta > /dev/null
echo "  Created per-account key pairs for instance launches"

echo "  Alpha launching instance..."
ALPHA_RUN=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --key-name alpha-instance-key \
    --profile spx-team-alpha)
ALPHA_INST=$(echo "$ALPHA_RUN" | jq -r '.Instances[0].InstanceId')
echo "  Alpha instance: $ALPHA_INST"

echo "  Beta launching instance..."
BETA_RUN=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --key-name beta-instance-key \
    --profile spx-team-beta)
BETA_INST=$(echo "$BETA_RUN" | jq -r '.Instances[0].InstanceId')
echo "  Beta instance: $BETA_INST"

# Wait for running
echo "  Waiting for instances to reach running state..."
COUNT=0
while [ $COUNT -lt 60 ]; do
    A_STATE=$(aws ec2 describe-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "pending")
    B_STATE=$(aws ec2 describe-instances --instance-ids "$BETA_INST" --profile spx-team-beta \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "pending")
    echo "  Alpha=$A_STATE, Beta=$B_STATE"
    if [ "$A_STATE" == "running" ] && [ "$B_STATE" == "running" ]; then break; fi
    sleep 1
    COUNT=$((COUNT + 1))
done
if [ "$A_STATE" != "running" ] || [ "$B_STATE" != "running" ]; then
    echo "  ERROR: Instances failed to reach running state"
    exit 1
fi
echo "  Both instances running"

# Describe isolation
ALPHA_INSTANCES=$(aws ec2 describe-instances --profile spx-team-alpha \
    --query 'Reservations[].Instances[].InstanceId' --output text)
if echo "$ALPHA_INSTANCES" | grep -q "$BETA_INST"; then
    echo "  ERROR: Alpha can see Beta's instance"
    exit 1
fi
echo "  Alpha sees only own instances"

BETA_INSTANCES=$(aws ec2 describe-instances --profile spx-team-beta \
    --query 'Reservations[].Instances[].InstanceId' --output text)
if echo "$BETA_INSTANCES" | grep -q "$ALPHA_INST"; then
    echo "  ERROR: Beta can see Alpha's instance"
    exit 1
fi
echo "  Beta sees only own instances"

# OwnerId verification
ALPHA_OWNER=$(aws ec2 describe-instances --profile spx-team-alpha \
    --query 'Reservations[0].OwnerId' --output text)
if [ "$ALPHA_OWNER" != "$ALPHA_ACCOUNT" ]; then
    echo "  ERROR: Alpha OwnerId mismatch: expected $ALPHA_ACCOUNT, got $ALPHA_OWNER"
    exit 1
fi
echo "  Alpha OwnerId correct: $ALPHA_OWNER"

# Cross-account operations
expect_error "InvalidInstanceID.NotFound" \
    aws ec2 stop-instances --instance-ids "$BETA_INST" --profile spx-team-alpha
echo "  Alpha cannot stop Beta's instance"

expect_error "InvalidInstanceID.NotFound" \
    aws ec2 terminate-instances --instance-ids "$ALPHA_INST" --profile spx-team-beta
echo "  Beta cannot terminate Alpha's instance"

expect_error "InvalidInstanceID.NotFound" \
    aws ec2 reboot-instances --instance-ids "$BETA_INST" --profile spx-team-alpha
echo "  Alpha cannot reboot Beta's instance"

# Stop Alpha's instance for cross-account start/modify/console tests
aws ec2 stop-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha > /dev/null
COUNT=0
while [ $COUNT -lt 60 ]; do
    A_STATE=$(aws ec2 describe-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null)
    if [ "$A_STATE" == "stopped" ]; then break; fi
    sleep 1
    COUNT=$((COUNT + 1))
done

expect_error "InvalidInstanceID.NotFound" \
    aws ec2 start-instances --instance-ids "$ALPHA_INST" --profile spx-team-beta
echo "  Beta cannot start Alpha's stopped instance"

expect_error "InvalidInstanceID.NotFound" \
    aws ec2 modify-instance-attribute --instance-id "$ALPHA_INST" \
    --instance-type '{"Value":"t2.small"}' --profile spx-team-beta
echo "  Beta cannot modify Alpha's instance"

expect_error "InvalidInstanceID.NotFound" \
    aws ec2 get-console-output --instance-id "$ALPHA_INST" --profile spx-team-beta
echo "  Beta cannot get console output of Alpha's instance"

# Restart Alpha's instance for later tests
aws ec2 start-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha > /dev/null
COUNT=0
while [ $COUNT -lt 60 ]; do
    A_STATE=$(aws ec2 describe-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null)
    if [ "$A_STATE" == "running" ]; then break; fi
    sleep 1
    COUNT=$((COUNT + 1))
done

echo "  Instance scoping passed"

# --- Step 3: Volume Scoping ---
echo ""
echo "Phase 8 Step 3: Volume Scoping"
echo "----------------------------------------"

ALPHA_VOL=$(aws ec2 create-volume --availability-zone "$AZ_NAME" --size 10 \
    --volume-type gp3 --profile spx-team-alpha | jq -r '.VolumeId')
echo "  Alpha volume: $ALPHA_VOL"

BETA_VOL=$(aws ec2 create-volume --availability-zone "$AZ_NAME" --size 10 \
    --volume-type gp3 --profile spx-team-beta | jq -r '.VolumeId')
echo "  Beta volume: $BETA_VOL"

# Describe isolation
ALPHA_VOLS=$(aws ec2 describe-volumes --profile spx-team-alpha \
    --query 'Volumes[].VolumeId' --output text)
if echo "$ALPHA_VOLS" | grep -q "$BETA_VOL"; then
    echo "  ERROR: Alpha can see Beta's volume"
    exit 1
fi
echo "  Alpha sees only own volumes"

# Cross-account filter
expect_error "InvalidVolume.NotFound" \
    aws ec2 describe-volumes --volume-ids "$BETA_VOL" --profile spx-team-alpha
echo "  Alpha cannot describe Beta's volume by ID"

# Cross-account delete
expect_error "InvalidVolume.NotFound" \
    aws ec2 delete-volume --volume-id "$ALPHA_VOL" --profile spx-team-beta
echo "  Beta cannot delete Alpha's volume"

# Cross-account attach (other's volume)
expect_error "InvalidVolume.NotFound" \
    aws ec2 attach-volume --volume-id "$ALPHA_VOL" \
    --instance-id "$BETA_INST" --device /dev/sdf --profile spx-team-beta
echo "  Beta cannot attach Alpha's volume"

# Attach Alpha's volume to Alpha's instance, then test cross-account detach
aws ec2 attach-volume --volume-id "$ALPHA_VOL" \
    --instance-id "$ALPHA_INST" --device /dev/sdf --profile spx-team-alpha > /dev/null
sleep 1

expect_error "InvalidVolume.NotFound" \
    aws ec2 detach-volume --volume-id "$ALPHA_VOL" --profile spx-team-beta
echo "  Beta cannot detach Alpha's volume"

# Cross-account modify
expect_error "InvalidVolume.NotFound" \
    aws ec2 modify-volume --volume-id "$ALPHA_VOL" --size 20 --profile spx-team-beta
echo "  Beta cannot modify Alpha's volume"

# Detach for cleanup later
aws ec2 detach-volume --volume-id "$ALPHA_VOL" --profile spx-team-alpha > /dev/null
sleep 1

echo "  Volume scoping passed"

# --- Step 4: Key Pair Scoping ---
echo ""
echo "Phase 8 Step 4: Key Pair Scoping"
echo "----------------------------------------"

aws ec2 create-key-pair --key-name alpha-key --profile spx-team-alpha > /dev/null
ALPHA_KEYPAIR_ID=$(aws ec2 describe-key-pairs --key-names alpha-key \
    --profile spx-team-alpha --query 'KeyPairs[0].KeyPairId' --output text)
echo "  Alpha key: alpha-key ($ALPHA_KEYPAIR_ID)"

aws ec2 create-key-pair --key-name beta-key --profile spx-team-beta > /dev/null
echo "  Beta key: beta-key"

# Describe isolation
ALPHA_KEYS=$(aws ec2 describe-key-pairs --profile spx-team-alpha \
    --query 'KeyPairs[].KeyName' --output text)
if echo "$ALPHA_KEYS" | grep -q "beta-key"; then
    echo "  ERROR: Alpha can see Beta's key"
    exit 1
fi
echo "  Alpha sees only own keys"

# Same name in both accounts (namespace isolation)
aws ec2 create-key-pair --key-name shared-name --profile spx-team-alpha > /dev/null
aws ec2 create-key-pair --key-name shared-name --profile spx-team-beta > /dev/null
ALPHA_SHARED_ID=$(aws ec2 describe-key-pairs --key-names shared-name \
    --profile spx-team-alpha --query 'KeyPairs[0].KeyPairId' --output text)
BETA_SHARED_ID=$(aws ec2 describe-key-pairs --key-names shared-name \
    --profile spx-team-beta --query 'KeyPairs[0].KeyPairId' --output text)
if [ "$ALPHA_SHARED_ID" == "$BETA_SHARED_ID" ]; then
    echo "  ERROR: Same KeyPairId for shared-name in both accounts"
    exit 1
fi
echo "  Namespace isolation: alpha=$ALPHA_SHARED_ID, beta=$BETA_SHARED_ID"

# Cross-account delete (idempotent, but shouldn't affect other account)
aws ec2 delete-key-pair --key-name alpha-key --profile spx-team-beta
ALPHA_KEY_CHECK=$(aws ec2 describe-key-pairs --key-names alpha-key \
    --profile spx-team-alpha --query 'KeyPairs[0].KeyPairId' --output text)
if [ "$ALPHA_KEY_CHECK" != "$ALPHA_KEYPAIR_ID" ]; then
    echo "  ERROR: Beta's delete affected Alpha's key"
    exit 1
fi
echo "  Cross-account delete had no effect on Alpha's key"

# Import key pair — account scoped
ssh-keygen -t ed25519 -f /tmp/test-import-key -N "" -q
aws ec2 import-key-pair --key-name imported-key \
    --public-key-material fileb:///tmp/test-import-key.pub --profile spx-team-alpha > /dev/null
BETA_IMPORT_CHECK=$(aws ec2 describe-key-pairs --profile spx-team-beta \
    --query 'KeyPairs[].KeyName' --output text)
if echo "$BETA_IMPORT_CHECK" | grep -q "imported-key"; then
    echo "  ERROR: Beta can see Alpha's imported key"
    exit 1
fi
echo "  Imported key invisible to Beta"
rm -f /tmp/test-import-key /tmp/test-import-key.pub

echo "  Key pair scoping passed"

# --- Step 5: Snapshot Scoping ---
echo ""
echo "Phase 8 Step 5: Snapshot Scoping"
echo "----------------------------------------"

ALPHA_SNAP=$(aws ec2 create-snapshot --volume-id "$ALPHA_VOL" \
    --description "Alpha snapshot" --profile spx-team-alpha | jq -r '.SnapshotId')
echo "  Alpha snapshot: $ALPHA_SNAP"

BETA_SNAP=$(aws ec2 create-snapshot --volume-id "$BETA_VOL" \
    --description "Beta snapshot" --profile spx-team-beta | jq -r '.SnapshotId')
echo "  Beta snapshot: $BETA_SNAP"

# Describe isolation
ALPHA_SNAPS=$(aws ec2 describe-snapshots --owner-ids self --profile spx-team-alpha \
    --query 'Snapshots[].SnapshotId' --output text)
if echo "$ALPHA_SNAPS" | grep -q "$BETA_SNAP"; then
    echo "  ERROR: Alpha can see Beta's snapshot"
    exit 1
fi
echo "  Alpha sees only own snapshots"

# OwnerId verification
ALPHA_SNAP_OWNER=$(aws ec2 describe-snapshots --owner-ids self --profile spx-team-alpha \
    --query 'Snapshots[0].OwnerId' --output text)
if [ "$ALPHA_SNAP_OWNER" != "$ALPHA_ACCOUNT" ]; then
    echo "  ERROR: Snapshot OwnerId mismatch: expected $ALPHA_ACCOUNT, got $ALPHA_SNAP_OWNER"
    exit 1
fi
echo "  Alpha snapshot OwnerId correct"

# Cross-account delete
expect_error "UnauthorizedOperation" \
    aws ec2 delete-snapshot --snapshot-id "$ALPHA_SNAP" --profile spx-team-beta
echo "  Beta cannot delete Alpha's snapshot"

# Cross-account snapshot from other's volume
expect_error "InvalidVolume.NotFound" \
    aws ec2 create-snapshot --volume-id "$ALPHA_VOL" \
    --description "stolen" --profile spx-team-beta
echo "  Beta cannot snapshot Alpha's volume"

echo "  Snapshot scoping passed"

# --- Step 6: VPC/Subnet Scoping ---
echo ""
echo "Phase 8 Step 6: VPC/Subnet Scoping"
echo "----------------------------------------"

ALPHA_VPC=$(aws ec2 create-vpc --cidr-block 10.0.0.0/16 \
    --profile spx-team-alpha --query 'Vpc.VpcId' --output text)
echo "  Alpha VPC: $ALPHA_VPC"

BETA_VPC=$(aws ec2 create-vpc --cidr-block 10.0.0.0/16 \
    --profile spx-team-beta --query 'Vpc.VpcId' --output text)
echo "  Beta VPC: $BETA_VPC (same CIDR — no conflict)"

# Describe isolation
ALPHA_VPCS=$(aws ec2 describe-vpcs --profile spx-team-alpha \
    --query 'Vpcs[].VpcId' --output text)
if echo "$ALPHA_VPCS" | grep -q "$BETA_VPC"; then
    echo "  ERROR: Alpha can see Beta's VPC"
    exit 1
fi
echo "  VPC describe isolation OK"

# Cross-account describe by ID
expect_error "InvalidVpcID.NotFound" \
    aws ec2 describe-vpcs --vpc-ids "$BETA_VPC" --profile spx-team-alpha
echo "  Alpha cannot describe Beta's VPC by ID"

# Cross-account delete
expect_error "InvalidVpcID.NotFound" \
    aws ec2 delete-vpc --vpc-id "$ALPHA_VPC" --profile spx-team-beta
echo "  Beta cannot delete Alpha's VPC"

# Create subnets
ALPHA_SUBNET=$(aws ec2 create-subnet --vpc-id "$ALPHA_VPC" --cidr-block 10.0.1.0/24 \
    --profile spx-team-alpha --query 'Subnet.SubnetId' --output text)
echo "  Alpha subnet: $ALPHA_SUBNET"

BETA_SUBNET=$(aws ec2 create-subnet --vpc-id "$BETA_VPC" --cidr-block 10.0.1.0/24 \
    --profile spx-team-beta --query 'Subnet.SubnetId' --output text)
echo "  Beta subnet: $BETA_SUBNET"

# Subnet describe isolation
ALPHA_SUBNETS=$(aws ec2 describe-subnets --profile spx-team-alpha \
    --query 'Subnets[].SubnetId' --output text)
if echo "$ALPHA_SUBNETS" | grep -q "$BETA_SUBNET"; then
    echo "  ERROR: Alpha can see Beta's subnet"
    exit 1
fi
echo "  Subnet describe isolation OK"

# Cross-account create subnet in other's VPC
expect_error "InvalidVpcID.NotFound" \
    aws ec2 create-subnet --vpc-id "$ALPHA_VPC" --cidr-block 10.0.2.0/24 \
    --profile spx-team-beta
echo "  Beta cannot create subnet in Alpha's VPC"

# Cross-account subnet delete
expect_error "InvalidSubnetID.NotFound" \
    aws ec2 delete-subnet --subnet-id "$ALPHA_SUBNET" --profile spx-team-beta
echo "  Beta cannot delete Alpha's subnet"

echo "  VPC/Subnet scoping passed"

# --- Step 7: IGW + EIGW Scoping ---
echo ""
echo "Phase 8 Step 7: IGW + EIGW Scoping"
echo "----------------------------------------"

# IGW
ALPHA_IGW=$(aws ec2 create-internet-gateway --profile spx-team-alpha \
    --query 'InternetGateway.InternetGatewayId' --output text)
echo "  Alpha IGW: $ALPHA_IGW"

BETA_IGW=$(aws ec2 create-internet-gateway --profile spx-team-beta \
    --query 'InternetGateway.InternetGatewayId' --output text)
echo "  Beta IGW: $BETA_IGW"

# IGW describe isolation
ALPHA_IGWS=$(aws ec2 describe-internet-gateways --profile spx-team-alpha \
    --query 'InternetGateways[].InternetGatewayId' --output text)
if echo "$ALPHA_IGWS" | grep -q "$BETA_IGW"; then
    echo "  ERROR: Alpha can see Beta's IGW"
    exit 1
fi
echo "  IGW describe isolation OK"

# Cross-account IGW describe by ID
expect_error "InvalidInternetGatewayID.NotFound" \
    aws ec2 describe-internet-gateways --internet-gateway-ids "$BETA_IGW" \
    --profile spx-team-alpha
echo "  Alpha cannot describe Beta's IGW by ID"

# Cross-account IGW delete
expect_error "InvalidInternetGatewayID.NotFound" \
    aws ec2 delete-internet-gateway --internet-gateway-id "$ALPHA_IGW" \
    --profile spx-team-beta
echo "  Beta cannot delete Alpha's IGW"

# Cross-account attach IGW to other's VPC
expect_error "InvalidInternetGatewayID.NotFound" \
    aws ec2 attach-internet-gateway --internet-gateway-id "$BETA_IGW" \
    --vpc-id "$ALPHA_VPC" --profile spx-team-alpha
echo "  Alpha cannot attach Beta's IGW to own VPC"

# Attach Alpha's IGW, test cross-account detach
aws ec2 attach-internet-gateway --internet-gateway-id "$ALPHA_IGW" \
    --vpc-id "$ALPHA_VPC" --profile spx-team-alpha > /dev/null
expect_error "InvalidInternetGatewayID.NotFound" \
    aws ec2 detach-internet-gateway --internet-gateway-id "$ALPHA_IGW" \
    --vpc-id "$ALPHA_VPC" --profile spx-team-beta
echo "  Beta cannot detach Alpha's IGW"

# EIGW
ALPHA_EIGW=$(aws ec2 create-egress-only-internet-gateway --vpc-id "$ALPHA_VPC" \
    --profile spx-team-alpha \
    --query 'EgressOnlyInternetGateway.EgressOnlyInternetGatewayId' --output text)
echo "  Alpha EIGW: $ALPHA_EIGW"

BETA_EIGW=$(aws ec2 create-egress-only-internet-gateway --vpc-id "$BETA_VPC" \
    --profile spx-team-beta \
    --query 'EgressOnlyInternetGateway.EgressOnlyInternetGatewayId' --output text)
echo "  Beta EIGW: $BETA_EIGW"

# EIGW describe isolation
ALPHA_EIGWS=$(aws ec2 describe-egress-only-internet-gateways --profile spx-team-alpha \
    --query 'EgressOnlyInternetGateways[].EgressOnlyInternetGatewayId' --output text)
if echo "$ALPHA_EIGWS" | grep -q "$BETA_EIGW"; then
    echo "  ERROR: Alpha can see Beta's EIGW"
    exit 1
fi
echo "  EIGW describe isolation OK"

# Cross-account EIGW delete
expect_error "" \
    aws ec2 delete-egress-only-internet-gateway \
    --egress-only-internet-gateway-id "$ALPHA_EIGW" --profile spx-team-beta 2>&1 || true
# Verify Alpha's EIGW still exists
ALPHA_EIGW_CHECK=$(aws ec2 describe-egress-only-internet-gateways --profile spx-team-alpha \
    --query 'EgressOnlyInternetGateways[].EgressOnlyInternetGatewayId' --output text)
if ! echo "$ALPHA_EIGW_CHECK" | grep -q "$ALPHA_EIGW"; then
    echo "  ERROR: Alpha's EIGW was deleted by Beta"
    exit 1
fi
echo "  Beta cannot delete Alpha's EIGW"

# Cross-account EIGW creation in other's VPC
expect_error "" \
    aws ec2 create-egress-only-internet-gateway --vpc-id "$ALPHA_VPC" \
    --profile spx-team-beta 2>&1 || true
echo "  Beta cannot create EIGW in Alpha's VPC"

echo "  IGW + EIGW scoping passed"

# --- Step 8: Account Settings ---
echo ""
echo "Phase 8 Step 8: Account Settings"
echo "----------------------------------------"

aws ec2 enable-ebs-encryption-by-default --profile spx-team-alpha > /dev/null
BETA_ENC=$(aws ec2 get-ebs-encryption-by-default --profile spx-team-beta \
    --query 'EbsEncryptionByDefault' --output text)
if [ "$BETA_ENC" != "False" ]; then
    echo "  ERROR: Alpha's encryption setting leaked to Beta (got $BETA_ENC)"
    exit 1
fi
echo "  Alpha enable did not affect Beta"

# Independent toggle
aws ec2 enable-ebs-encryption-by-default --profile spx-team-beta > /dev/null
aws ec2 disable-ebs-encryption-by-default --profile spx-team-alpha > /dev/null
ALPHA_ENC=$(aws ec2 get-ebs-encryption-by-default --profile spx-team-alpha \
    --query 'EbsEncryptionByDefault' --output text)
BETA_ENC=$(aws ec2 get-ebs-encryption-by-default --profile spx-team-beta \
    --query 'EbsEncryptionByDefault' --output text)
if [ "$ALPHA_ENC" != "False" ] || [ "$BETA_ENC" != "True" ]; then
    echo "  ERROR: Independent settings failed: alpha=$ALPHA_ENC beta=$BETA_ENC"
    exit 1
fi
echo "  Independent toggle verified: alpha=$ALPHA_ENC, beta=$BETA_ENC"

# Reset
aws ec2 disable-ebs-encryption-by-default --profile spx-team-beta > /dev/null

echo "  Account settings scoping passed"

# --- Step 9: Global Resources ---
echo ""
echo "Phase 8 Step 9: Global Resources"
echo "----------------------------------------"

ALPHA_REGIONS=$(aws ec2 describe-regions --profile spx-team-alpha \
    --query 'Regions[].RegionName' --output text)
BETA_REGIONS=$(aws ec2 describe-regions --profile spx-team-beta \
    --query 'Regions[].RegionName' --output text)
if [ "$ALPHA_REGIONS" != "$BETA_REGIONS" ]; then
    echo "  ERROR: Regions differ between accounts"
    exit 1
fi
echo "  Regions identical"

ALPHA_AZS=$(aws ec2 describe-availability-zones --profile spx-team-alpha \
    --query 'AvailabilityZones[].ZoneName' --output text)
BETA_AZS=$(aws ec2 describe-availability-zones --profile spx-team-beta \
    --query 'AvailabilityZones[].ZoneName' --output text)
if [ "$ALPHA_AZS" != "$BETA_AZS" ]; then
    echo "  ERROR: AZs differ between accounts"
    exit 1
fi
echo "  Availability zones identical"

ALPHA_TYPES=$(aws ec2 describe-instance-types --profile spx-team-alpha \
    --query 'InstanceTypes[].InstanceType' --output text | tr '\t' '\n' | sort)
BETA_TYPES=$(aws ec2 describe-instance-types --profile spx-team-beta \
    --query 'InstanceTypes[].InstanceType' --output text | tr '\t' '\n' | sort)
if [ "$ALPHA_TYPES" != "$BETA_TYPES" ]; then
    echo "  ERROR: Instance types differ between accounts"
    exit 1
fi
echo "  Instance types identical"

echo "  Global resources passed"

# --- Step 10: Edge Cases ---
echo ""
echo "Phase 8 Step 10: Edge Cases"
echo "----------------------------------------"

# Empty account (Gamma)
echo "  Creating empty Gamma account..."
GAMMA_OUTPUT=$(spx admin account create --name "Team Gamma" 2>&1)
GAMMA_KEY_ID=$(echo "$GAMMA_OUTPUT" | grep "Access Key ID:" | awk '{print $NF}')
GAMMA_SECRET=$(echo "$GAMMA_OUTPUT" | grep "Secret Access Key:" | awk '{print $NF}')
setup_test_profile spx-team-gamma "$GAMMA_KEY_ID" "$GAMMA_SECRET"

GAMMA_INSTANCES=$(aws ec2 describe-instances --profile spx-team-gamma \
    --query 'Reservations' --output text)
if [ -n "$GAMMA_INSTANCES" ] && [ "$GAMMA_INSTANCES" != "None" ]; then
    echo "  ERROR: Gamma has instances"
    exit 1
fi
echo "  Gamma: no instances"

# Skip volume check: root-account volumes (empty TenantID) are visible to all accounts by design
echo "  Gamma: volumes skipped (root legacy volumes visible to all)"

GAMMA_KEYS=$(aws ec2 describe-key-pairs --profile spx-team-gamma \
    --query 'KeyPairs' --output text)
if [ -n "$GAMMA_KEYS" ] && [ "$GAMMA_KEYS" != "None" ]; then
    echo "  ERROR: Gamma has key pairs"
    exit 1
fi
echo "  Gamma: no key pairs"

GAMMA_SNAPS=$(aws ec2 describe-snapshots --owner-ids self --profile spx-team-gamma \
    --query 'Snapshots' --output text)
if [ -n "$GAMMA_SNAPS" ] && [ "$GAMMA_SNAPS" != "None" ]; then
    echo "  ERROR: Gamma has snapshots"
    exit 1
fi
echo "  Gamma: no snapshots"

# Root isolation from tenants
echo "  Verifying root isolation from tenants..."
aws ec2 create-key-pair --key-name root-scoping-key > /dev/null
ALPHA_ROOT_CHECK=$(aws ec2 describe-key-pairs --profile spx-team-alpha \
    --query 'KeyPairs[].KeyName' --output text)
if echo "$ALPHA_ROOT_CHECK" | grep -q "root-scoping-key"; then
    echo "  ERROR: Alpha can see root's key pair"
    exit 1
fi
echo "  Tenants cannot see root's key pairs"

ROOT_INSTANCE_CHECK=$(aws ec2 describe-instances \
    --query 'Reservations[].Instances[].InstanceId' --output text)
if echo "$ROOT_INSTANCE_CHECK" | grep -q "$ALPHA_INST"; then
    echo "  ERROR: Root can see Alpha's instance"
    exit 1
fi
echo "  Root cannot see tenant instances"
aws ec2 delete-key-pair --key-name root-scoping-key > /dev/null

# Non-existent resource IDs — same error as cross-account
expect_error "InvalidVolume.NotFound" \
    aws ec2 delete-volume --volume-id vol-00000000000000000 --profile spx-team-alpha
echo "  Non-existent volume: same error as cross-account"

expect_error "InvalidSnapshot.NotFound" \
    aws ec2 delete-snapshot --snapshot-id snap-00000000000000000 --profile spx-team-alpha
echo "  Non-existent snapshot: same error as cross-account"

echo "  Edge cases passed"

# --- Step 11: EC2 Account Scoping Cleanup ---
echo ""
echo "Phase 8 Step 11: EC2 Account Scoping Cleanup"
echo "----------------------------------------"

# Terminate instances
echo "  Terminating Alpha instance..."
aws ec2 terminate-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha > /dev/null
echo "  Terminating Beta instance..."
aws ec2 terminate-instances --instance-ids "$BETA_INST" --profile spx-team-beta > /dev/null

# Wait for termination
COUNT=0
while [ $COUNT -lt 60 ]; do
    A_STATE=$(aws ec2 describe-instances --instance-ids "$ALPHA_INST" --profile spx-team-alpha \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "terminated")
    B_STATE=$(aws ec2 describe-instances --instance-ids "$BETA_INST" --profile spx-team-beta \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "terminated")
    if [ "$A_STATE" == "terminated" ] && [ "$B_STATE" == "terminated" ]; then
        break
    fi
    sleep 1
    COUNT=$((COUNT + 1))
done
echo "  Instances terminated"

# Delete snapshots
echo "  Deleting snapshots..."
aws ec2 delete-snapshot --snapshot-id "$ALPHA_SNAP" --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-snapshot --snapshot-id "$BETA_SNAP" --profile spx-team-beta 2>/dev/null || true

# Delete volumes (wait for detach/termination cleanup)
sleep 3
echo "  Deleting volumes..."
aws ec2 delete-volume --volume-id "$ALPHA_VOL" --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-volume --volume-id "$BETA_VOL" --profile spx-team-beta 2>/dev/null || true

# Delete key pairs
echo "  Deleting key pairs..."
for key in alpha-key alpha-instance-key shared-name imported-key; do
    aws ec2 delete-key-pair --key-name "$key" --profile spx-team-alpha 2>/dev/null || true
done
for key in beta-key beta-instance-key shared-name; do
    aws ec2 delete-key-pair --key-name "$key" --profile spx-team-beta 2>/dev/null || true
done

# Delete EIGWs
echo "  Deleting EIGWs..."
aws ec2 delete-egress-only-internet-gateway \
    --egress-only-internet-gateway-id "$ALPHA_EIGW" --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-egress-only-internet-gateway \
    --egress-only-internet-gateway-id "$BETA_EIGW" --profile spx-team-beta 2>/dev/null || true

# Detach + delete IGWs
echo "  Deleting IGWs..."
aws ec2 detach-internet-gateway --internet-gateway-id "$ALPHA_IGW" \
    --vpc-id "$ALPHA_VPC" --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-internet-gateway --internet-gateway-id "$ALPHA_IGW" \
    --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-internet-gateway --internet-gateway-id "$BETA_IGW" \
    --profile spx-team-beta 2>/dev/null || true

# Delete subnets
echo "  Deleting subnets..."
aws ec2 delete-subnet --subnet-id "$ALPHA_SUBNET" --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-subnet --subnet-id "$BETA_SUBNET" --profile spx-team-beta 2>/dev/null || true

# Delete VPCs
echo "  Deleting VPCs..."
aws ec2 delete-vpc --vpc-id "$ALPHA_VPC" --profile spx-team-alpha 2>/dev/null || true
aws ec2 delete-vpc --vpc-id "$BETA_VPC" --profile spx-team-beta 2>/dev/null || true

# Clean up AWS CLI profiles
for p in spx-team-alpha spx-team-beta spx-team-gamma; do
    aws configure set aws_access_key_id "" --profile $p 2>/dev/null || true
    aws configure set aws_secret_access_key "" --profile $p 2>/dev/null || true
done

echo "  EC2 account scoping cleanup complete"
echo ""
echo "Phase 8: EC2 Account Scoping PASSED"

# Phase 8c: Route Table Validation
echo ""
echo "Phase 8c: Route Table Validation"
echo "========================================"

# Step 1: Default VPC has a main route table with local + IGW routes
echo "Step 1: Verify default VPC main route table"
RTB_DEFAULT_VPC=$(aws ec2 describe-vpcs --query 'Vpcs[?IsDefault==`true`].VpcId | [0]' --output text)
if [ -z "$RTB_DEFAULT_VPC" ] || [ "$RTB_DEFAULT_VPC" = "None" ]; then
    echo "FAIL: No default VPC found — route table tests require a default VPC"
    exit 1
fi

MAIN_RTB=$(aws ec2 describe-route-tables \
    --filters "Name=vpc-id,Values=$RTB_DEFAULT_VPC" "Name=association.main,Values=true" \
    --query 'RouteTables[0].RouteTableId' --output text)
if [ -z "$MAIN_RTB" ] || [ "$MAIN_RTB" = "None" ]; then
    echo "FAIL: No main route table found for default VPC $RTB_DEFAULT_VPC"
    exit 1
fi
echo "  Main route table: $MAIN_RTB"

# Verify local route exists
LOCAL_ROUTE=$(aws ec2 describe-route-tables --route-table-ids "$MAIN_RTB" \
    --query 'RouteTables[0].Routes[?GatewayId==`local`].DestinationCidrBlock | [0]' --output text)
if [ -z "$LOCAL_ROUTE" ] || [ "$LOCAL_ROUTE" = "None" ]; then
    echo "FAIL: Main route table missing local route"
    exit 1
fi
echo "  Local route: $LOCAL_ROUTE → local"

# Verify IGW route exists
IGW_ROUTE=$(aws ec2 describe-route-tables --route-table-ids "$MAIN_RTB" \
    --query 'RouteTables[0].Routes[?DestinationCidrBlock==`0.0.0.0/0`].GatewayId | [0]' --output text)
if [ -z "$IGW_ROUTE" ] || [ "$IGW_ROUTE" = "None" ]; then
    echo "FAIL: Main route table missing 0.0.0.0/0 → IGW route"
    exit 1
fi
echo "  Default route: 0.0.0.0/0 → $IGW_ROUTE"
echo "  PASS: Default VPC main route table verified"

# Step 2: Custom route table lifecycle
echo ""
echo "Step 2: Custom route table CRUD lifecycle"
RTB_VPC=$RTB_DEFAULT_VPC

# Create custom route table
CUSTOM_RTB=$(aws ec2 create-route-table --vpc-id "$RTB_VPC" \
    --query 'RouteTable.RouteTableId' --output text)
echo "  Created: $CUSTOM_RTB"

# Verify local route present
CUSTOM_LOCAL=$(aws ec2 describe-route-tables --route-table-ids "$CUSTOM_RTB" \
    --query 'RouteTables[0].Routes[?GatewayId==`local`].DestinationCidrBlock | [0]' --output text)
if [ -z "$CUSTOM_LOCAL" ] || [ "$CUSTOM_LOCAL" = "None" ]; then
    echo "FAIL: Custom route table missing local route"
    exit 1
fi
echo "  Local route present: $CUSTOM_LOCAL"

# Find attached IGW for this VPC
RTB_IGW=$(aws ec2 describe-internet-gateways \
    --filters "Name=attachment.vpc-id,Values=$RTB_VPC" \
    --query 'InternetGateways[0].InternetGatewayId' --output text)

# Add IGW route
aws ec2 create-route --route-table-id "$CUSTOM_RTB" \
    --destination-cidr-block 0.0.0.0/0 --gateway-id "$RTB_IGW" > /dev/null
echo "  Added route: 0.0.0.0/0 → $RTB_IGW"

# Find default subnet
RTB_SUBNET=$(aws ec2 describe-subnets \
    --filters "Name=vpc-id,Values=$RTB_VPC" "Name=default-for-az,Values=true" \
    --query 'Subnets[0].SubnetId' --output text)

# Associate with default subnet
RTB_ASSOC=$(aws ec2 associate-route-table --route-table-id "$CUSTOM_RTB" \
    --subnet-id "$RTB_SUBNET" --query 'AssociationId' --output text)
echo "  Associated: $RTB_ASSOC ($RTB_SUBNET → $CUSTOM_RTB)"

# Disassociate
aws ec2 disassociate-route-table --association-id "$RTB_ASSOC"
echo "  Disassociated: $RTB_ASSOC"

# Delete route, then table
aws ec2 delete-route --route-table-id "$CUSTOM_RTB" --destination-cidr-block 0.0.0.0/0
echo "  Deleted route: 0.0.0.0/0"
aws ec2 delete-route-table --route-table-id "$CUSTOM_RTB"
echo "  Deleted route table: $CUSTOM_RTB"
echo "  PASS: Custom route table lifecycle complete"

# Step 3: Error paths
echo ""
echo "Step 3: Route table error paths"

# Create a temporary route table for error testing
ERR_RTB=$(aws ec2 create-route-table --vpc-id "$RTB_VPC" \
    --query 'RouteTable.RouteTableId' --output text)

# Cannot delete local route
if aws ec2 delete-route --route-table-id "$ERR_RTB" \
    --destination-cidr-block "$CUSTOM_LOCAL" 2>/dev/null; then
    echo "FAIL: Should not be able to delete local route"
    exit 1
fi
echo "  PASS: Delete local route correctly rejected"

# Cannot delete main route table
if aws ec2 delete-route-table --route-table-id "$MAIN_RTB" 2>/dev/null; then
    echo "FAIL: Should not be able to delete main route table"
    exit 1
fi
echo "  PASS: Delete main route table correctly rejected"

# Cleanup
aws ec2 delete-route-table --route-table-id "$ERR_RTB"
echo "  Cleanup: deleted $ERR_RTB"

echo ""
echo "Phase 8c: Route Table Validation PASSED"

# Phase 8b: VPC Public/Private Subnet E2E
echo ""
echo "Phase 8b: VPC Public/Private Subnet E2E"
echo "========================================"

# Check if external networking is configured
HAS_EXTERNAL=false
if grep -q 'external_mode = "pool"' /etc/spinifex/spinifex.toml 2>/dev/null; then
    HAS_EXTERNAL=true
fi

HAS_OVN=false
if command -v ovn-nbctl &>/dev/null; then
    HAS_OVN=true
fi

if [ "$HAS_EXTERNAL" != "true" ]; then
    echo "Skipping Phase 8b: no external networking configured"
    echo "(set SPX_EXTERNAL_POOL=start-end to enable)"
else

echo "Phase 8b Step 1: Discover default VPC infrastructure"
# The default VPC, subnet, and IGW are created by admin init
DEFAULT_VPC=$(aws ec2 describe-vpcs --query 'Vpcs[?IsDefault==`true`].VpcId | [0]' --output text)
if [ -z "$DEFAULT_VPC" ] || [ "$DEFAULT_VPC" = "None" ]; then
    echo "FATAL: No default VPC found — admin init may not have run"
    exit 1
fi
DEFAULT_SUBNET=$(aws ec2 describe-subnets --query "Subnets[?VpcId=='${DEFAULT_VPC}' && DefaultForAz==\`true\`].SubnetId | [0]" --output text)
echo "Default VPC: $DEFAULT_VPC"
echo "Default subnet: $DEFAULT_SUBNET (MapPublicIpOnLaunch=true)"

echo ""
echo "Phase 8b Step 2: Public subnet instance"
# Launch instance in default subnet (MapPublicIpOnLaunch=true, IGW attached)
echo "Launching instance in public subnet..."
PUB_RUN_OUTPUT=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --subnet-id "$DEFAULT_SUBNET" \
    --key-name test-key-1 \
    --output json 2>&1)
PUB_INSTANCE_ID=$(echo "$PUB_RUN_OUTPUT" | jq -r '.Instances[0].InstanceId')
echo "Public instance: $PUB_INSTANCE_ID"

# Wait for running
echo "Waiting for public instance to reach running state..."
PUB_COUNT=0
PUB_STATE="unknown"
while [ $PUB_COUNT -lt 90 ]; do
    PUB_STATE=$(aws ec2 describe-instances --instance-ids "$PUB_INSTANCE_ID" \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "pending")
    if [ "$PUB_STATE" == "running" ]; then
        echo "Public instance is running"
        break
    fi
    sleep 1
    PUB_COUNT=$((PUB_COUNT + 1))
done
if [ "$PUB_STATE" != "running" ]; then
    echo "FAIL: Public instance did not reach running state (got: $PUB_STATE)"
    exit 1
fi

# Verify public IP is assigned
PUB_IP=$(aws ec2 describe-instances --instance-ids "$PUB_INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PublicIpAddress' --output text)
PUB_PRIVATE_IP=$(aws ec2 describe-instances --instance-ids "$PUB_INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PrivateIpAddress' --output text)
echo "Public IP: $PUB_IP, Private IP: $PUB_PRIVATE_IP"

if [ -z "$PUB_IP" ] || [ "$PUB_IP" = "None" ]; then
    echo "FAIL: Public subnet instance has no PublicIpAddress"
    exit 1
fi
echo "PASS: Public subnet instance has PublicIpAddress=$PUB_IP"

# OVN verification: per-VM dnat_and_snat rule exists
if [ "$HAS_OVN" = true ]; then
    NAT_RULES=$(sudo ovn-nbctl --no-leader-only lr-nat-list "vpc-${DEFAULT_VPC}" 2>/dev/null || echo "")

    # Verify dnat_and_snat exists for this VM's private IP
    if echo "$NAT_RULES" | grep -q "dnat_and_snat.*${PUB_PRIVATE_IP}"; then
        echo "PASS: OVN dnat_and_snat rule exists for $PUB_PRIVATE_IP"
    else
        echo "FAIL: No OVN dnat_and_snat rule for $PUB_PRIVATE_IP"
        echo "NAT rules:"
        echo "$NAT_RULES"
        exit 1
    fi

    # Verify NO blanket VPC CIDR SNAT (mulga-754 fix)
    if echo "$NAT_RULES" | grep -q "snat.*172.31.0.0/16"; then
        echo "FAIL: Blanket VPC CIDR SNAT exists (should have been removed by mulga-754)"
        echo "NAT rules:"
        echo "$NAT_RULES"
        exit 1
    fi
    echo "PASS: No blanket VPC CIDR SNAT on router (AWS parity)"
fi

# SSH into public instance via its public IP and verify outbound connectivity.
# This proves the full path: host → public IP → OVN DNAT → VM → OVN SNAT → internet.
echo "Waiting for SSH via public IP $PUB_IP..."
PUB_SSH_READY=false
for attempt in $(seq 1 60); do
    if ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
        -o ConnectTimeout=3 -o BatchMode=yes -i "test-key-1.pem" \
        ec2-user@"$PUB_IP" 'true' 2>/dev/null; then
        PUB_SSH_READY=true
        break
    fi
    sleep 2
done
if [ "$PUB_SSH_READY" = true ]; then
    echo "PASS: SSH via public IP $PUB_IP succeeded"

    # Verify outbound internet from VM (via OVN SNAT, not QEMU user-mode)
    set +e
    OUTBOUND_OK=$(ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
        -o ConnectTimeout=5 -o BatchMode=yes -i "test-key-1.pem" \
        ec2-user@"$PUB_IP" 'ping -c 2 -W 5 8.8.8.8 >/dev/null 2>&1 && echo yes || echo no' 2>/dev/null)
    set -e
    if [ "$OUTBOUND_OK" = "yes" ]; then
        echo "PASS: Outbound internet from public instance via OVN SNAT"
    else
        echo "WARN: Outbound internet test inconclusive (may depend on WAN gateway)"
    fi
    # Verify cloud-init injected the Spinifex CA into the guest trust store.
    # The guest should be able to curl Spinifex services (awsgw, predastore)
    # WITHOUT --insecure, proving the CA cert was installed via ca_certs module.
    echo ""
    echo "Phase 8b Step 2b: In-guest TLS trust (cloud-init CA injection)"

    # Test 1: Guest can reach awsgw via HTTPS without --insecure
    set +e
    GUEST_TLS_AWSGW=$(ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
        -o ConnectTimeout=5 -o BatchMode=yes -i "test-key-1.pem" \
        ec2-user@"$PUB_IP" "curl -s -o /dev/null -w '%{http_code}' --connect-timeout 5 https://${GATEWAY_HOST}:9999/ 2>/dev/null || echo 000" 2>/dev/null)
    set -e

    if [ -n "$GUEST_TLS_AWSGW" ] && [ "$GUEST_TLS_AWSGW" != "000" ]; then
        echo "PASS: Guest VM trusts awsgw TLS (HTTP $GUEST_TLS_AWSGW) — cloud-init CA injection works"
    else
        echo "FAIL: Guest VM cannot reach awsgw via HTTPS without --insecure (got: $GUEST_TLS_AWSGW)"
        echo "  This means cloud-init did not inject the Spinifex CA into the guest trust store."
        echo "  Checking guest user-data for ca_certs block..."
        ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
            -o BatchMode=yes -i "test-key-1.pem" \
            ec2-user@"$PUB_IP" "cat /var/lib/cloud/instance/user-data.txt 2>/dev/null | head -30" 2>/dev/null || true
        exit 1
    fi

    # Test 2: Guest can reach predastore S3 via HTTPS without --insecure
    set +e
    GUEST_TLS_S3=$(ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
        -o ConnectTimeout=5 -o BatchMode=yes -i "test-key-1.pem" \
        ec2-user@"$PUB_IP" "curl -s -o /dev/null -w '%{http_code}' --connect-timeout 5 https://${GATEWAY_HOST}:8443/ 2>/dev/null || echo 000" 2>/dev/null)
    set -e

    if [ -n "$GUEST_TLS_S3" ] && [ "$GUEST_TLS_S3" != "000" ]; then
        echo "PASS: Guest VM trusts predastore S3 TLS (HTTP $GUEST_TLS_S3)"
    else
        echo "WARN: Guest VM cannot reach predastore S3 at https://${GATEWAY_HOST}:8443 (got: $GUEST_TLS_S3)"
        echo "  Predastore may use a separate self-signed cert (QUIC) — this is expected for now."
    fi

    # Test 3: Verify the ca_certs block exists in guest user-data
    set +e
    ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR \
        -o BatchMode=yes -i "test-key-1.pem" \
        ec2-user@"$PUB_IP" "sudo grep -q ca_certs /var/lib/cloud/instance/user-data.txt" 2>/dev/null
    GREP_EXIT=$?
    set -e

    if [ "$GREP_EXIT" -eq 0 ]; then
        echo "PASS: Guest user-data contains ca_certs block"
    else
        echo "FAIL: Guest user-data does NOT contain ca_certs block"
        exit 1
    fi
else
    echo "WARN: SSH via public IP $PUB_IP not reachable (bridge not ready)"
    echo "Falling back to API-only verification (OVN state already validated above)"
fi

echo ""
echo "Phase 8b Step 3: Private subnet isolation"
# Create a second subnet in the default VPC without MapPublicIpOnLaunch
echo "Creating private subnet 172.31.16.0/20 in default VPC..."
PRIV_SUBNET_OUTPUT=$(aws ec2 create-subnet \
    --vpc-id "$DEFAULT_VPC" \
    --cidr-block 172.31.16.0/20 \
    --output json 2>&1)
PRIV_SUBNET_ID=$(echo "$PRIV_SUBNET_OUTPUT" | jq -r '.Subnet.SubnetId')
echo "Private subnet: $PRIV_SUBNET_ID"

# Verify MapPublicIpOnLaunch is false (default)
MAP_PUB=$(echo "$PRIV_SUBNET_OUTPUT" | jq -r '.Subnet.MapPublicIpOnLaunch')
if [ "$MAP_PUB" = "false" ]; then
    echo "PASS: Private subnet MapPublicIpOnLaunch=false"
else
    echo "FAIL: Expected MapPublicIpOnLaunch=false, got $MAP_PUB"
    exit 1
fi

# Launch instance in private subnet
echo "Launching instance in private subnet..."
PRIV_RUN_OUTPUT=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --subnet-id "$PRIV_SUBNET_ID" \
    --key-name test-key-1 \
    --output json 2>&1)
PRIV_INSTANCE_ID=$(echo "$PRIV_RUN_OUTPUT" | jq -r '.Instances[0].InstanceId')
echo "Private instance: $PRIV_INSTANCE_ID"

# Wait for running
echo "Waiting for private instance to reach running state..."
PRIV_COUNT=0
PRIV_STATE="unknown"
while [ $PRIV_COUNT -lt 90 ]; do
    PRIV_STATE=$(aws ec2 describe-instances --instance-ids "$PRIV_INSTANCE_ID" \
        --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "pending")
    if [ "$PRIV_STATE" == "running" ]; then
        echo "Private instance is running"
        break
    fi
    sleep 1
    PRIV_COUNT=$((PRIV_COUNT + 1))
done
if [ "$PRIV_STATE" != "running" ]; then
    echo "FAIL: Private instance did not reach running state (got: $PRIV_STATE)"
    exit 1
fi

# Verify NO public IP assigned
PRIV_PUB_IP=$(aws ec2 describe-instances --instance-ids "$PRIV_INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PublicIpAddress' --output text)
PRIV_PRIVATE_IP=$(aws ec2 describe-instances --instance-ids "$PRIV_INSTANCE_ID" \
    --query 'Reservations[0].Instances[0].PrivateIpAddress' --output text)
echo "Private instance — PublicIpAddress: $PRIV_PUB_IP, PrivateIpAddress: $PRIV_PRIVATE_IP"

if [ -z "$PRIV_PUB_IP" ] || [ "$PRIV_PUB_IP" = "None" ] || [ "$PRIV_PUB_IP" = "null" ]; then
    echo "PASS: Private subnet instance has no PublicIpAddress"
else
    echo "FAIL: Private subnet instance should NOT have PublicIpAddress (got: $PRIV_PUB_IP)"
    exit 1
fi

# OVN verification: NO dnat_and_snat for private instance
if [ "$HAS_OVN" = true ]; then
    NAT_RULES=$(sudo ovn-nbctl --no-leader-only lr-nat-list "vpc-${DEFAULT_VPC}" 2>/dev/null || echo "")

    if echo "$NAT_RULES" | grep -q "dnat_and_snat.*${PRIV_PRIVATE_IP}"; then
        echo "FAIL: Private instance has dnat_and_snat rule (should not)"
        echo "NAT rules:"
        echo "$NAT_RULES"
        exit 1
    fi
    echo "PASS: No OVN dnat_and_snat rule for private instance $PRIV_PRIVATE_IP"

    # Confirm still no blanket SNAT
    if echo "$NAT_RULES" | grep -q "snat.*172.31.0.0/16"; then
        echo "FAIL: Blanket VPC CIDR SNAT appeared after private instance launch"
        exit 1
    fi
    echo "PASS: Still no blanket VPC CIDR SNAT (private instances are fully isolated)"
fi

# Phase 8d: NAT Gateway E2E (mulga-763)
# Reuses PUB_INSTANCE_ID/PUB_IP (bastion) and PRIV_INSTANCE_ID/PRIV_PRIVATE_IP from Phase 8b
echo ""
echo "Phase 8d: NAT Gateway E2E"
echo "========================================"

# SSH helper: hop through public VM (bastion) to reach private VM
BASTION_SSH="ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR -o BatchMode=yes -i test-key-1.pem ec2-user@$PUB_IP"
PRIV_SSH_CMD="ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR -o ConnectTimeout=10 -o BatchMode=yes -i /tmp/key.pem ec2-user@$PRIV_PRIVATE_IP"

# Copy SSH key to bastion for hop to private instance
echo "Setting up bastion SSH key..."
scp -o StrictHostKeyChecking=no -o LogLevel=ERROR -i test-key-1.pem test-key-1.pem "ec2-user@$PUB_IP:/tmp/key.pem"
$BASTION_SSH "chmod 600 /tmp/key.pem"

# Step 1: Wait for private instance SSH to be ready via bastion hop
# The private VM needs cloud-init time (~30-40s after "running" state).
echo ""
echo "Step 1: Waiting for private instance SSH via bastion (cloud-init boot)..."
BASTION_SSH_OK=false
for attempt in $(seq 1 30); do
    if PRIV_HOSTNAME=$($BASTION_SSH "$PRIV_SSH_CMD 'hostname'" 2>/dev/null); then
        BASTION_SSH_OK=true
        break
    fi
    echo "  Attempt $attempt/30: private instance SSH not ready yet..."
    sleep 5
done

if [ "$BASTION_SSH_OK" != "true" ]; then
    echo "FAIL: Cannot reach private instance from bastion after 150s"
    echo "  Public VM (bastion): $PUB_IP → $PUB_PRIVATE_IP"
    echo "  Private VM target: $PRIV_PRIVATE_IP"
    echo "  Debugging: checking OVN port bindings..."
    sudo ovn-sbctl --no-leader-only show 2>/dev/null | head -20 || true
    exit 1
fi
echo "  PASS: Bastion → private instance SSH works (hostname: $PRIV_HOSTNAME)"
{

    # Step 2: Baseline — private instance has NO internet
    echo ""
    echo "Step 2: Confirm private instance has no internet (baseline)"
    if $BASTION_SSH "$PRIV_SSH_CMD 'ping -c 1 -W 3 8.8.8.8'" 2>/dev/null; then
        echo "FAIL: Private instance can reach internet WITHOUT NAT GW"
        exit 1
    fi
    echo "  PASS: Private instance cannot reach internet (expected)"

    # Step 3: Create NAT Gateway + route
    echo ""
    echo "Step 3: Create NAT Gateway"
    NAT_EIP_OUTPUT=$(aws ec2 allocate-address --domain vpc --output json)
    NAT_ALLOC_ID=$(echo "$NAT_EIP_OUTPUT" | jq -r '.AllocationId')
    NAT_PUB_IP=$(echo "$NAT_EIP_OUTPUT" | jq -r '.PublicIp')
    echo "  Allocated EIP: $NAT_PUB_IP ($NAT_ALLOC_ID)"

    NAT_GW_OUTPUT=$(aws ec2 create-nat-gateway \
        --subnet-id "$DEFAULT_SUBNET" \
        --allocation-id "$NAT_ALLOC_ID" --output json)
    NAT_GW_ID=$(echo "$NAT_GW_OUTPUT" | jq -r '.NatGateway.NatGatewayId')
    echo "  NAT Gateway: $NAT_GW_ID"

    # Create route table, associate with private subnet, THEN add NAT GW route.
    # Order matters: CreateRoute publishes SNAT events for associated subnets,
    # so the association must exist before the route is added.
    NAT_RTB=$(aws ec2 create-route-table --vpc-id "$DEFAULT_VPC" \
        --query 'RouteTable.RouteTableId' --output text)
    NAT_RTB_ASSOC=$(aws ec2 associate-route-table --route-table-id "$NAT_RTB" \
        --subnet-id "$PRIV_SUBNET_ID" --query 'AssociationId' --output text)
    aws ec2 create-route --route-table-id "$NAT_RTB" \
        --destination-cidr-block 0.0.0.0/0 --nat-gateway-id "$NAT_GW_ID" > /dev/null
    echo "  Route: 0.0.0.0/0 → $NAT_GW_ID (rtb: $NAT_RTB, assoc: $NAT_RTB_ASSOC)"

    # Verify OVN SNAT rule exists (poll — NATS → vpcd → OVN can take several seconds)
    if [ "$HAS_OVN" = true ]; then
        SNAT_FOUND=false
        for attempt in $(seq 1 30); do
            NAT_RULES=$(sudo ovn-nbctl --no-leader-only lr-nat-list "vpc-${DEFAULT_VPC}" 2>/dev/null || echo "")
            if echo "$NAT_RULES" | grep -q "snat.*${NAT_PUB_IP}"; then
                SNAT_FOUND=true
                echo "  PASS: OVN SNAT rule created for NAT Gateway (after ${attempt}s)"
                break
            fi
            sleep 1
        done
        if [ "$SNAT_FOUND" = false ]; then
            echo "  WARN: OVN SNAT rule not found after 30s"
            echo "  NAT rules: $NAT_RULES"
        fi
    fi

    # Step 4: Verify private instance CAN now reach internet
    # OVN needs time to install datapath flows after the SNAT rule is created.
    # Retry with increasing backoff rather than a fixed sleep.
    echo ""
    echo "Step 4: Verify outbound connectivity via NAT GW"
    NAT_GW_OK=false
    for attempt in $(seq 1 10); do
        if $BASTION_SSH "$PRIV_SSH_CMD 'ping -c 2 -W 3 8.8.8.8'" 2>/dev/null; then
            NAT_GW_OK=true
            echo "  PASS: Private instance can reach internet via NAT Gateway (attempt $attempt)"
            break
        fi
        echo "  Attempt $attempt: NAT GW not routing yet, retrying in 5s..."
        sleep 5
    done
    if [ "$NAT_GW_OK" = false ]; then
        echo "  FAIL: Private instance cannot reach internet WITH NAT GW after 10 attempts"
        echo ""
        echo "==================== Phase 8d failure diagnostics ===================="
        echo "VPC: vpc-${DEFAULT_VPC}"
        echo "Private subnet: ${PRIV_SUBNET_ID} (private VM IP: ${PRIV_PRIVATE_IP})"
        echo "NATGW: ${NAT_GW_ID} → ${NAT_PUB_IP}"
        echo ""
        echo "--- ovn-nbctl lr-nat-list vpc-${DEFAULT_VPC} ---"
        sudo ovn-nbctl --no-leader-only lr-nat-list "vpc-${DEFAULT_VPC}" 2>&1 || true
        echo ""
        echo "--- ovn-nbctl lr-route-list vpc-${DEFAULT_VPC} ---"
        sudo ovn-nbctl --no-leader-only lr-route-list "vpc-${DEFAULT_VPC}" 2>&1 || true
        echo ""
        echo "--- ovn-nbctl show ---"
        sudo ovn-nbctl --no-leader-only show 2>&1 || true
        echo ""
        echo "--- ovn-sbctl show ---"
        sudo ovn-sbctl --no-leader-only show 2>&1 || true
        echo ""
        echo "--- ovn-sbctl list chassis ---"
        sudo ovn-sbctl --no-leader-only list chassis 2>&1 || true
        echo ""
        echo "--- ovn-nbctl find Port_Group (membership + ACLs) ---"
        sudo ovn-nbctl --no-leader-only --columns=name,ports,acls find Port_Group 2>&1 || true
        echo ""
        echo "--- ovn-nbctl list ACL (all VPC ACLs) ---"
        sudo ovn-nbctl --no-leader-only list ACL 2>&1 || true
        echo ""
        echo "--- ovn-nbctl find Logical_Switch_Port name=*${PRIV_PRIVATE_IP//./_}* (private VM LSP) ---"
        sudo ovn-nbctl --no-leader-only find Logical_Switch_Port addresses=\"*${PRIV_PRIVATE_IP}*\" 2>&1 || true
        echo ""
        echo "--- ovs-vsctl show ---"
        sudo ovs-vsctl show 2>&1 || true
        echo ""
        echo "--- ovs-ofctl dump-flows br-int (filtered: NATGW IP/subnet/private IP) ---"
        sudo ovs-ofctl dump-flows br-int 2>&1 \
            | grep -E "${NAT_PUB_IP//./\\.}|172\\.31\\.16\\.|${PRIV_PRIVATE_IP//./\\.}" \
            | head -200 || true
        echo ""
        echo "--- ovs-ofctl dump-flows br-int | wc -l (total flows) ---"
        sudo ovs-ofctl dump-flows br-int 2>&1 | wc -l || true
        echo ""
        echo "--- ip route show ---"
        ip route show 2>&1 || true
        echo ""
        echo "--- ip -br addr show ---"
        ip -br addr show 2>&1 || true
        echo ""
        echo "--- private VM: ip addr / ip route / ip neigh ---"
        $BASTION_SSH "$PRIV_SSH_CMD 'ip -br addr; echo ---; ip route; echo ---; ip neigh'" 2>&1 || true
        echo ""
        echo "--- private VM: ping -c 1 subnet gateway (172.31.16.1) ---"
        $BASTION_SSH "$PRIV_SSH_CMD 'ping -c 1 -W 3 172.31.16.1; echo rc=\$?'" 2>&1 || true
        echo ""
        echo "==================== end Phase 8d diagnostics ===================="
        exit 1
    fi

    # Step 5: Delete NAT GW and verify internet stops
    echo ""
    echo "Step 5: Delete NAT GW and verify internet stops"
    aws ec2 delete-nat-gateway --nat-gateway-id "$NAT_GW_ID" > /dev/null
    aws ec2 disassociate-route-table --association-id "$NAT_RTB_ASSOC"
    aws ec2 delete-route --route-table-id "$NAT_RTB" --destination-cidr-block 0.0.0.0/0
    aws ec2 delete-route-table --route-table-id "$NAT_RTB"
    aws ec2 release-address --allocation-id "$NAT_ALLOC_ID"
    echo "  NAT GW deleted, route table cleaned up, EIP released"

    # Poll for SNAT removal — OVN datapath may cache the old flow briefly
    SNAT_GONE=false
    for attempt in $(seq 1 15); do
        if ! $BASTION_SSH "$PRIV_SSH_CMD 'ping -c 1 -W 3 8.8.8.8'" 2>/dev/null; then
            SNAT_GONE=true
            echo "  PASS: Private instance lost internet after NAT GW deletion (after ${attempt}s)"
            break
        fi
        echo "  Attempt $attempt: SNAT still cached, waiting..."
        sleep 2
    done
    if [ "$SNAT_GONE" = false ]; then
        echo "  FAIL: Private instance still has internet after NAT GW deletion"
        exit 1
    fi

    echo ""
    echo "Phase 8d: NAT Gateway E2E PASSED"
}

# Free single-node capacity before Phase 8e by terminating the Phase 8b
# instances early — nothing between here and Phase 8b's later cleanup uses
# PUB/PRIV. On nano-only single-node CI the running pool would otherwise be
# main + PUB + PRIV (3 instances) + Phase 8e's 2 more = 5, which exceeds
# capacity. The gateway masquerades that as "InvalidInstanceType: None"
# (RunInstances.go isKnownInstanceType masquerade), masking the real cause.
echo ""
echo "Freeing capacity for Phase 8e: terminating Phase 8b instances early..."
aws ec2 terminate-instances --instance-ids "$PUB_INSTANCE_ID" "$PRIV_INSTANCE_ID" > /dev/null
for EARLY_ID in "$PUB_INSTANCE_ID" "$PRIV_INSTANCE_ID"; do
    EARLY_COUNT=0
    while [ $EARLY_COUNT -lt 60 ]; do
        EARLY_STATE=$(aws ec2 describe-instances --instance-ids "$EARLY_ID" \
            --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "terminated")
        if [ "$EARLY_STATE" = "terminated" ] || [ "$EARLY_STATE" = "None" ]; then
            break
        fi
        sleep 1
        EARLY_COUNT=$((EARLY_COUNT + 1))
    done
done
# Mark as already cleaned so the later cleanup block becomes a no-op.
PHASE8B_INSTANCES_TERMINATED=true
echo "  PUB+PRIV terminated; capacity reclaimed"

# Phase 8e: Security Group Enforcement
# Reuses DEFAULT_VPC, DEFAULT_SUBNET, AMI_ID, INSTANCE_TYPE, test-key-1.pem
# from earlier phases. Validates the closed loop from RunInstances
# (--security-group-ids) → ENI → vpcd → OVN port group + ACL → datapath drop.
echo ""
echo "Phase 8e: Security Group Enforcement"
echo "========================================"

# Step 1: Create client-sg and target-sg.
echo "Step 1: Create security groups"
SGE_CLIENT_SG=$(aws ec2 create-security-group \
    --group-name sge-client \
    --description "Phase 8e client SG (SSH ingress from anywhere)" \
    --vpc-id "$DEFAULT_VPC" \
    --query 'GroupId' --output text)
echo "  client-sg: $SGE_CLIENT_SG"

SGE_TARGET_SG=$(aws ec2 create-security-group \
    --group-name sge-target \
    --description "Phase 8e target SG (TCP/8080 ingress from client-sg only)" \
    --vpc-id "$DEFAULT_VPC" \
    --query 'GroupId' --output text)
echo "  target-sg: $SGE_TARGET_SG"

aws ec2 authorize-security-group-ingress \
    --group-id "$SGE_CLIENT_SG" \
    --protocol tcp --port 22 --cidr 0.0.0.0/0 > /dev/null
echo "  client-sg ingress: tcp/22 from 0.0.0.0/0"

# SG-to-SG via UserIdGroupPair (the VPC-form; --source-group is EC2-Classic only).
aws ec2 authorize-security-group-ingress \
    --group-id "$SGE_TARGET_SG" \
    --ip-permissions "IpProtocol=tcp,FromPort=8080,ToPort=8080,UserIdGroupPairs=[{GroupId=$SGE_CLIENT_SG}]" > /dev/null
echo "  target-sg ingress: tcp/8080 from $SGE_CLIENT_SG (SG-to-SG)"

# Step 2: Launch client-vm and target-vm in the public subnet so both get
# public IPs (MapPublicIpOnLaunch=true). Target's HTTP server is started via
# cloud-init user-data — target-sg has no SSH ingress, so we cannot ssh into it.
echo ""
echo "Step 2: Launch client-vm and target-vm"

SGE_CLIENT_VM=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --subnet-id "$DEFAULT_SUBNET" \
    --key-name test-key-1 \
    --security-group-ids "$SGE_CLIENT_SG" \
    --query 'Instances[0].InstanceId' --output text)
echo "  client-vm: $SGE_CLIENT_VM"

# systemd-run fully detaches the http server from cloud-init's process group;
# `nohup ... &` alone races with cloud-init exit and the server can get killed.
# Pass plaintext — AWS CLI base64-encodes --user-data automatically; awsgw
# decodes once on receipt. Pre-encoding here results in a double-encoded blob
# landing verbatim in /tmp/cloud-init-startup.sh.
SGE_TARGET_USERDATA=$(cat <<'EOF'
#!/bin/bash
systemd-run --unit=sge-http --description="Phase 8e HTTP server" \
    /usr/bin/python3 -m http.server 8080 --bind 0.0.0.0
EOF
)

SGE_TARGET_VM=$(aws ec2 run-instances \
    --image-id "$AMI_ID" \
    --instance-type "$INSTANCE_TYPE" \
    --subnet-id "$DEFAULT_SUBNET" \
    --key-name test-key-1 \
    --security-group-ids "$SGE_TARGET_SG" \
    --user-data "$SGE_TARGET_USERDATA" \
    --query 'Instances[0].InstanceId' --output text)
echo "  target-vm: $SGE_TARGET_VM"

# Wait both running.
for SGE_VM in "$SGE_CLIENT_VM" "$SGE_TARGET_VM"; do
    SGE_W=0
    SGE_S="unknown"
    while [ $SGE_W -lt 90 ]; do
        SGE_S=$(aws ec2 describe-instances --instance-ids "$SGE_VM" \
            --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "pending")
        if [ "$SGE_S" = "running" ]; then break; fi
        sleep 1
        SGE_W=$((SGE_W + 1))
    done
    if [ "$SGE_S" != "running" ]; then
        echo "FAIL: $SGE_VM did not reach running (got: $SGE_S)"
        exit 1
    fi
done
echo "  Both VMs running"

SGE_CLIENT_PUB=$(aws ec2 describe-instances --instance-ids "$SGE_CLIENT_VM" \
    --query 'Reservations[0].Instances[0].PublicIpAddress' --output text)
SGE_CLIENT_PRIV=$(aws ec2 describe-instances --instance-ids "$SGE_CLIENT_VM" \
    --query 'Reservations[0].Instances[0].PrivateIpAddress' --output text)
SGE_TARGET_PRIV=$(aws ec2 describe-instances --instance-ids "$SGE_TARGET_VM" \
    --query 'Reservations[0].Instances[0].PrivateIpAddress' --output text)
SGE_CLIENT_ENI=$(aws ec2 describe-instances --instance-ids "$SGE_CLIENT_VM" \
    --query 'Reservations[0].Instances[0].NetworkInterfaces[0].NetworkInterfaceId' --output text)
SGE_TARGET_ENI=$(aws ec2 describe-instances --instance-ids "$SGE_TARGET_VM" \
    --query 'Reservations[0].Instances[0].NetworkInterfaces[0].NetworkInterfaceId' --output text)
echo "  client-vm: pub=$SGE_CLIENT_PUB priv=$SGE_CLIENT_PRIV eni=$SGE_CLIENT_ENI"
echo "  target-vm: priv=$SGE_TARGET_PRIV eni=$SGE_TARGET_ENI"

# Step 3: Internal correctness via ovn-nbctl — confirm each LSP joined the
# expected port group. Catches Phase 4 membership regressions independently
# of packet timing.
echo ""
echo "Step 3: ovn-nbctl port_group membership"
# OVN port group names use [_a-zA-Z0-9]; spinifex maps sg-XXXX → sg_XXXX.
SGE_CLIENT_PG="${SGE_CLIENT_SG//-/_}"
SGE_TARGET_PG="${SGE_TARGET_SG//-/_}"
SGE_CLIENT_LSP="port-${SGE_CLIENT_ENI}"
SGE_TARGET_LSP="port-${SGE_TARGET_ENI}"

SGE_CLIENT_LSP_UUID=$(sudo ovn-nbctl --no-leader-only --bare --columns=_uuid find logical_switch_port name="$SGE_CLIENT_LSP" 2>/dev/null || echo "")
SGE_TARGET_LSP_UUID=$(sudo ovn-nbctl --no-leader-only --bare --columns=_uuid find logical_switch_port name="$SGE_TARGET_LSP" 2>/dev/null || echo "")
if [ -z "$SGE_CLIENT_LSP_UUID" ] || [ -z "$SGE_TARGET_LSP_UUID" ]; then
    echo "FAIL: LSP UUIDs not found in OVN NB"
    echo "  client-lsp ($SGE_CLIENT_LSP): '$SGE_CLIENT_LSP_UUID'"
    echo "  target-lsp ($SGE_TARGET_LSP): '$SGE_TARGET_LSP_UUID'"
    exit 1
fi

SGE_CLIENT_PG_PORTS=$(sudo ovn-nbctl --no-leader-only --bare --columns=ports find port_group name="$SGE_CLIENT_PG" 2>/dev/null || echo "")
SGE_TARGET_PG_PORTS=$(sudo ovn-nbctl --no-leader-only --bare --columns=ports find port_group name="$SGE_TARGET_PG" 2>/dev/null || echo "")

if echo "$SGE_CLIENT_PG_PORTS" | grep -q "$SGE_CLIENT_LSP_UUID"; then
    echo "  PASS: client LSP in port_group $SGE_CLIENT_PG"
else
    echo "FAIL: client LSP $SGE_CLIENT_LSP_UUID not in port_group $SGE_CLIENT_PG"
    echo "  ports: $SGE_CLIENT_PG_PORTS"
    exit 1
fi
if echo "$SGE_TARGET_PG_PORTS" | grep -q "$SGE_TARGET_LSP_UUID"; then
    echo "  PASS: target LSP in port_group $SGE_TARGET_PG"
else
    echo "FAIL: target LSP $SGE_TARGET_LSP_UUID not in port_group $SGE_TARGET_PG"
    echo "  ports: $SGE_TARGET_PG_PORTS"
    exit 1
fi

# Confirm client's private IP made it into the client_pg_ip4 address set so
# target-sg's SG-to-SG match expression resolves. The <pg>_ip4 / <pg>_ip6
# sets are auto-derived by ovn-northd from port_group membership and live in
# SB, not NB (see security.go:73, topology.go:803). northd is async so retry
# briefly to ride out the post-join propagation window.
SGE_AS_OK=false
for SGE_W in $(seq 1 10); do
    SGE_CLIENT_AS_ADDRS=$(sudo ovn-sbctl --no-leader-only --bare --columns=addresses find address_set name="${SGE_CLIENT_PG}_ip4" 2>/dev/null || echo "")
    if echo "$SGE_CLIENT_AS_ADDRS" | grep -qF "$SGE_CLIENT_PRIV"; then
        SGE_AS_OK=true
        break
    fi
    sleep 1
done
if [ "$SGE_AS_OK" = "true" ]; then
    echo "  PASS: client private IP $SGE_CLIENT_PRIV in SB address_set ${SGE_CLIENT_PG}_ip4"
else
    echo "FAIL: client private IP $SGE_CLIENT_PRIV missing from SB address_set ${SGE_CLIENT_PG}_ip4"
    echo "  addresses: $SGE_CLIENT_AS_ADDRS"
    exit 1
fi

# Wait for client SSH to be ready (cloud-init).
SGE_CLIENT_SSH="ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR -o ConnectTimeout=5 -o BatchMode=yes -i test-key-1.pem ec2-user@$SGE_CLIENT_PUB"
echo ""
echo "Waiting for client-vm SSH..."
SGE_SSH_OK=false
for SGE_W in $(seq 1 60); do
    if $SGE_CLIENT_SSH 'true' 2>/dev/null; then
        SGE_SSH_OK=true
        break
    fi
    sleep 2
done
if [ "$SGE_SSH_OK" != "true" ]; then
    echo "FAIL: client-vm SSH did not become ready"
    exit 1
fi
echo "  PASS: client-vm SSH ready"

# Step 4: Allowed traffic — client → target:8080 must succeed.
# Retry to give target's cloud-init time to start python3 -m http.server.
echo ""
echo "Step 4: Allowed traffic (client → target:8080, SG-to-SG allow rule)"
SGE_HTTP_OK=false
for SGE_W in $(seq 1 30); do
    if $SGE_CLIENT_SSH "curl -sS -o /dev/null -m 5 http://${SGE_TARGET_PRIV}:8080/" 2>/dev/null; then
        SGE_HTTP_OK=true
        echo "  PASS: client → target:8080 succeeded (after ${SGE_W} attempts)"
        break
    fi
    sleep 2
done
if [ "$SGE_HTTP_OK" != "true" ]; then
    echo "FAIL: client cannot reach target:8080"
    # Disambiguate: curl -v shows "Connection refused" (server down) vs
    # "Connection timed out" (ACL filtered). Then dump target console for
    # cloud-init / systemd-run / python3 evidence.
    echo "  --- curl -v from client to target:8080 ---"
    $SGE_CLIENT_SSH "curl -v --connect-timeout 3 http://${SGE_TARGET_PRIV}:8080/" 2>&1 | tail -25 || true
    echo "  --- target console output (tail 80) ---"
    aws ec2 get-console-output --instance-id "$SGE_TARGET_VM" --output text 2>&1 | tail -80 || true
    exit 1
fi

# Step 5: Denied traffic — client → target:22 must fail.
# target-sg has no SSH ingress; default-deny ACL must drop.
echo ""
echo "Step 5: Denied traffic (client → target:22, no SSH ingress on target-sg)"
if $SGE_CLIENT_SSH "nc -z -w 5 ${SGE_TARGET_PRIV} 22" 2>/dev/null; then
    echo "FAIL: client reached target:22 — default-deny ACL not enforced"
    exit 1
fi
echo "  PASS: client → target:22 blocked"

# Step 6: Revoke target-sg's 8080 rule and retest immediately.
# The synchronous vpc.update-sg RequestEvent contract (Phase 7) makes
# propagation to OVN immediate — no sleep needed.
echo ""
echo "Step 6: Revoke target-sg ingress, retest (sync RequestEvent contract)"
aws ec2 revoke-security-group-ingress \
    --group-id "$SGE_TARGET_SG" \
    --ip-permissions "IpProtocol=tcp,FromPort=8080,ToPort=8080,UserIdGroupPairs=[{GroupId=$SGE_CLIENT_SG}]" > /dev/null
echo "  Revoked tcp/8080 from $SGE_CLIENT_SG"

# Fresh TCP connection — conntrack does not affect new connections.
if $SGE_CLIENT_SSH "curl -sS -o /dev/null -m 5 http://${SGE_TARGET_PRIV}:8080/" 2>/dev/null; then
    echo "FAIL: client still reached target:8080 after revoke — propagation not immediate"
    exit 1
fi
echo "  PASS: client → target:8080 now blocked after revoke"

# Step 7: Cleanup — terminate Phase 8e VMs and delete SGs before the shared
# 8b/8d cleanup runs. Otherwise the SGs would still reference live ENIs.
echo ""
echo "Step 7: Cleanup"
aws ec2 terminate-instances --instance-ids "$SGE_CLIENT_VM" "$SGE_TARGET_VM" > /dev/null
for SGE_VM in "$SGE_CLIENT_VM" "$SGE_TARGET_VM"; do
    SGE_W=0
    SGE_S="unknown"
    while [ $SGE_W -lt 60 ]; do
        SGE_S=$(aws ec2 describe-instances --instance-ids "$SGE_VM" \
            --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "terminated")
        if [ "$SGE_S" = "terminated" ] || [ "$SGE_S" = "None" ]; then break; fi
        sleep 1
        SGE_W=$((SGE_W + 1))
    done
done
aws ec2 delete-security-group --group-id "$SGE_TARGET_SG"
aws ec2 delete-security-group --group-id "$SGE_CLIENT_SG"
echo "  PASS: VMs terminated, SGs deleted"

echo ""
echo "Phase 8e: Security Group Enforcement PASSED"

echo ""
echo "Phase 8b/8d Step: Cleanup"
if [ "$PHASE8B_INSTANCES_TERMINATED" = "true" ]; then
    echo "  PUB+PRIV already terminated before Phase 8e (capacity reclaim)"
else
    # Terminate both instances
    echo "Terminating public instance $PUB_INSTANCE_ID..."
    aws ec2 terminate-instances --instance-ids "$PUB_INSTANCE_ID"
    echo "Terminating private instance $PRIV_INSTANCE_ID..."
    aws ec2 terminate-instances --instance-ids "$PRIV_INSTANCE_ID"

    # Wait for both to terminate
    for CLEANUP_ID in "$PUB_INSTANCE_ID" "$PRIV_INSTANCE_ID"; do
        CLEANUP_COUNT=0
        while [ $CLEANUP_COUNT -lt 60 ]; do
            CLEANUP_STATE=$(aws ec2 describe-instances --instance-ids "$CLEANUP_ID" \
                --query 'Reservations[0].Instances[0].State.Name' --output text 2>/dev/null || echo "terminated")
            if [ "$CLEANUP_STATE" == "terminated" ] || [ "$CLEANUP_STATE" == "None" ]; then
                echo "Instance $CLEANUP_ID terminated"
                break
            fi
            sleep 1
            CLEANUP_COUNT=$((CLEANUP_COUNT + 1))
        done
    done
fi

# Verify public IP NAT rule removed after termination (async via NATS)
if [ "$HAS_OVN" = true ]; then
    echo "Waiting for NAT rule cleanup..."
    NAT_CLEANED=false
    for nat_wait in $(seq 1 15); do
        NAT_RULES=$(sudo ovn-nbctl --no-leader-only lr-nat-list "vpc-${DEFAULT_VPC}" 2>/dev/null || echo "")
        if ! echo "$NAT_RULES" | grep -q "dnat_and_snat.*${PUB_PRIVATE_IP}"; then
            NAT_CLEANED=true
            break
        fi
        sleep 2
    done
    if [ "$NAT_CLEANED" = true ]; then
        echo "PASS: NAT rule cleaned up after public instance termination"
    else
        echo "WARN: dnat_and_snat rule for $PUB_PRIVATE_IP still present after 30s (non-fatal)"
    fi
fi

# Delete private subnet
echo "Deleting private subnet $PRIV_SUBNET_ID..."
aws ec2 delete-subnet --subnet-id "$PRIV_SUBNET_ID"
echo "PASS: Private subnet deleted"

echo ""
echo "Phase 8b: VPC Public/Private Subnet E2E PASSED"

fi  # end HAS_EXTERNAL check

# Phase 9: Terminate and Verify Cleanup
echo "Phase 9: Terminate and Verify Cleanup"

# Save root volume ID before termination for cleanup verification
ROOT_VOLUME_ID="$VOLUME_ID"
echo "Root volume to verify cleanup: $ROOT_VOLUME_ID"

# Clean up the CreateImage backing snapshot so DeleteOnTermination can delete the root volume.
# checkVolumeHasNoSnapshots() correctly blocks volume deletion when snapshots reference it.
if [ -n "$CUSTOM_AMI_SNAP_ID" ]; then
    echo "Deleting CreateImage backing snapshot $CUSTOM_AMI_SNAP_ID before termination..."
    aws ec2 delete-snapshot --snapshot-id "$CUSTOM_AMI_SNAP_ID"
    echo "CreateImage snapshot deleted"
fi

# Deregister the custom AMI so later test suites (e.g. run-lb-e2e.sh) don't
# discover an AMI whose backing snapshot has been deleted.
if [ -n "$CUSTOM_AMI_ID" ]; then
    echo "Deregistering custom AMI $CUSTOM_AMI_ID..."
    aws ec2 deregister-image --image-id "$CUSTOM_AMI_ID" 2>/dev/null || true
    echo "Custom AMI deregistered"
fi

# Terminate instance (terminate-instances) and verify termination (describe-instances)
echo "Terminating instance..."
aws ec2 terminate-instances --instance-ids "$INSTANCE_ID"
COUNT=0
while [ $COUNT -lt 60 ]; do
    STATE=$(aws ec2 describe-instances --instance-ids "$INSTANCE_ID" --query 'Reservations[0].Instances[0].State.Name' --output text)
    echo "Instance state: $STATE"
    if [ "$STATE" == "terminated" ] || [ "$STATE" == "None" ]; then
        break
    fi
    sleep 1
    COUNT=$((COUNT + 1))
done

# Phase 9a: Verify SSH unreachable after termination
echo "Phase 9a: SSH Unreachable Verification"
verify_ssh_unreachable "$SSH_HOST" "$SSH_PORT" "test-key-1.pem"
echo "SSH unreachable verification passed"

# Phase 9b: Verify root volume cleanup after termination
echo "Phase 9b: Volume Cleanup Verification"
echo "Verifying root volume $ROOT_VOLUME_ID is cleaned up after termination..."
sleep 5  # Allow time for async volume deletion

COUNT=0
VOLUME_CLEANED=false
while [ $COUNT -lt 20 ]; do
    set +e
    VOL_CHECK=$(aws ec2 describe-volumes --volume-ids "$ROOT_VOLUME_ID" \
        --query 'Volumes[0].State' --output text 2>&1)
    VOL_EXIT=$?
    set -e

    if [ $VOL_EXIT -ne 0 ] || [ "$VOL_CHECK" == "None" ] || [ -z "$VOL_CHECK" ]; then
        VOLUME_CLEANED=true
        echo "Root volume $ROOT_VOLUME_ID has been cleaned up (DeleteOnTermination)"
        break
    fi

    echo "Volume still exists (State=$VOL_CHECK), waiting... ($COUNT/20)"
    sleep 3
    COUNT=$((COUNT + 1))
done

if [ "$VOLUME_CLEANED" != "true" ]; then
    echo "WARNING: Root volume $ROOT_VOLUME_ID was not cleaned up after termination"
    echo "This may indicate a DeleteOnTermination regression"
    exit 1
fi

echo "Volume cleanup verification passed"

echo "E2E Test Completed Successfully"
exit 0