GRUB_CMDLINE_LINUX in /etc/default/grub only listed console=tty0, so the
installed kernel printed nothing on serial after the GRUB menu. Headless
installs (CI, racks with serial-only IPMI, remote-dev SSH-to-QEMU) saw a
black screen forever and had no path to debug boot failures.
Append console=ttyS0,115200 — the last `console=` on the cmdline becomes
the system console, so ttyS0 wins on serial-only hardware while tty0
still receives output on local displays.
Plan: docs/development/bugs/iso-public-ip-boot-race.md
Extract all inline systemd unit and drop-in content from install.go and
firstboot.go into a dedicated cmd/installer/systemd package for editability.
Bash scripts remain inline in firstboot.go.
Also copies the GRUB splash image from the live ISO into the installed
system's /boot/grub/ and sets GRUB_BACKGROUND so the branded background
appears in the post-install GRUB, not just the installer GRUB.
- partUUID: error on empty blkid output instead of writing UUID= to fstab
- installBootloader: fail if both EFI and BIOS targets fail; track efiErr
- machine-id fallback: write at mode 0600 so systemd can commit on first boot
- Run: defer unmount so partitions are always cleaned up on failure
- copyRootfs: verify critical paths exist after rsync before continuing
- resolveNIC: skip virtual/bridge interfaces (docker0, virbr0, ovs-system)
- EjectAndReboot: use syscall.Reboot instead of exec(reboot) which needs D-Bus
- ui.Run: return error on TTY open failure instead of silent fallback
- firstboot script: trap EXIT to always self-disable, preventing retry loops
- enableUnit/enableBannerUnit: deduplicate into enableSystemdUnit; check Remove
- runAdminBanner: promote service restart failure to slog.Error
- parseNodeConf: log non-ENOENT read failures
- Add spinifex login user password via chpasswd in install.go (same
password as root, collected once in TUI)
- Copy /root/.aws/ to /home/spinifex/.aws/ in firstboot so the operator
can use the AWS CLI without sudo after first boot
- Fix getty drop-ins to be instance-specific (tty1/ttyS0 only), leaving
tty2+ immediately available as rescue terminals
- Remove autologin — node now requires password at login prompt
- Pre-start OVS/OVN in firstboot and poll NB DB up to 120s to eliminate
setup-ovn.sh timeout races on slow physical hardware
- Tighten per-service ownership in firstboot (each service user owns only
its own /var/lib/spinifex subdirectory)
- Add LAN bridge as a non-critical systemd unit so a missing LAN cable
can never stall network-online.target or firstboot
- Write dhcpcd.conf with short br-lan timeout; add networking.service
drop-in to treat exit 1 as success for optional interface failures
- Disable IPv6 on management bridges to silence dhcpcd journal noise
- Fix WAN/LAN enter-key and ESC navigation logic in TUI
- Fix LAN NIC cursor to skip WAN NIC correctly
- Replace single network screen with separate WAN and LAN screens
- WAN/LAN IPs now live on Linux bridges (br-wan, br-lan) over the physical
NICs, not on the NICs directly — makes OVS/OVN veth attachment SSH-safe
- Add DHCP/static toggle on both screens (DHCP is the default)
- Add DNS nameserver input for static mode (comma-separated, default hint
1.1.1.1 / 8.8.8.8 shown as placeholder)
- Detect WiFi NICs via /sys/class/net/<name>/wireless; show SSID and
password fields when a WiFi adapter is selected
- LAN screen shows WAN NIC greyed/unavailable; cursor skips over it
- LAN screen only shown when 2+ NICs are detected
- Geneve encap IP uses br-lan address when LAN NIC present, else br-wan
- Remove --macvlan/--wan-iface from firstboot; setup-ovn.sh auto-detects
br-wan as a Linux bridge and uses veth mode
- Pin both WAN and LAN NIC names to MAC via a single udev rules file
- node.conf writes MANAGEMENT_IFACE=br-wan (bridge, not physical NIC)
- chown /etc/spinifex and /var/lib/spinifex to spinifex:spinifex after
spx admin init so services running as the spinifex user can read configs
- add Environment=HOME=/root to firstboot unit to suppress $HOME warning
- increase wait-for-nats.sh timeout from 30s to 90s for slow startup
- banner now writes to both /dev/tty1 and /etc/motd (visible over SSH)
- add systemd.show_status=1 to GRUB cmdline for per-service boot feedback
- add --removable to grub-install EFI so fallback path EFI/BOOT/BOOTX64.EFI
is written (required for UTM and bare metal without NVRAM boot entries)
- add root password screen and manual NIC entry to installer TUI
- tee spx admin init output to /root/spinifex-credentials.txt with 0600 perms
Adds cmd/installer with three packages:
- ui: huh-based TUI collecting disk, network, node, and cluster config
- install: sequential install steps (partition, debootstrap, chroot, bootloader)
- firstboot: oneshot systemd service that runs setup-ovn and spx admin init/join on first real boot
Supports both single-node init and multi-node join flows.
joshsiv-mulga