mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-19 19:01:42 +00:00
d26e441007e327f3ecb392fee09986af7300a89f
18 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Julian Sommer
|
1c4d41bffc | fix: reach the DB endpoint from any subnet of the VPC (#738) | ||
|
Julian Sommer
|
2e09461080 | chore: cleanup code comments | ||
|
Julian Sommer
|
5e17169661 | feat(e2e): complete the RDS end-to-end suite (#608) | ||
|
Julian Sommer
|
2569601e3d | feat: implement RDS CreateDBInstance, reconciler and endpoint DNS (#594) | ||
|
Josh Siviour
|
cae76ba1b6 |
test: complete the e2e live-vs-mock rebalance (epic mulga-8oyg3) (#566)
* test(volume): assert chunk GC stays wired on in CreateVolume GCEnabled was zero-valued at every viperblock construction site for a long time and no test noticed. It is not part of viperblock.VBState, so it never round-trips through a saved config.json and cannot be observed by reading volume state back. Extract the viperblock.VB assembly out of CreateVolume into buildVBConfig so the GC wiring is assertable directly against the returned config, without a live viperblock or S3 backend. The config is returned by pointer because viperblock.VB carries atomic.Uint64 fields that vet's copylocks check rightly refuses to see copied. * test(e2e): snapshot backend byte accounting before volume purge DeleteVolume purges a volume's entire backend prefix, including any chunks a leak left behind, before anything measures it. That is the same masking that hid the storage-growth leak in production: a passing E2E cannot fail on backend growth when the evidence is deleted first. Snapshot the volume's backend chunk footprint in EnsureVolume's cleanup closure, immediately before DeleteVolume, so every volume the shared teardown path purges is measured rather than silently discarded. The snapshot is always taken and logged; the hard ratio check additionally runs for callers that registered a guest-written-bytes baseline, since most callers never attach or write to the volume they create and so have no baseline to compare against. The tolerance is the RS(2,1) erasure floor widened for per-chunk header and tail-chunk overhead. It is sized to distinguish unbounded growth from a footprint settling at the floor, not to catch bounded residual garbage. The check is non-fatal inside the cleanup callback: t.Fatalf's runtime.Goexit would abort the DeleteVolume call queued behind it and turn a reported leak into a real one. * test(e2e): add memory-constrained concurrent-write durability regression The existing durability tests write one 4MiB sentinel, sequentially, on a comfortably sized guest, which is the exact inverse of the known-open data-loss bug: acked writes read back zero-filled after a cold reread when a guest is memory-starved during concurrent writeback. No happy-path test can reach it, because the fault lives in the intersection of memory pressure, write concurrency and cache-cold reread. Add a suite that encodes those three conditions together: a guest discovered at or below the working set, N parallel large writers launched as background jobs in a single command so they genuinely overlap, swap disabled, then sync and drop_caches before rereading. Assertions are per stream rather than aggregate so a failure names the losing writer instead of leaving whoever reads it to re-derive which of N writers lost data from one combined digest. GuestExec gains a timeout-parameterised variant. Its fixed two-minute default is sized for sub-second payloads, and a multi-gigabyte write to a network-backed volume would exceed it, so the suite would have failed by timeout while looking like it had caught the corruption. The budget scales with the working set, and a deadline is reported distinctly from a data mismatch so the two red states are never confused. The suite is dispatchable but deliberately absent from the default SUITES: the bug it reproduces is still open, so it is expected to fail and must not sit in a merge-gating path. It is registered in the workflow allow-list so it stays discoverable rather than being buried behind a skip. Also record on the live IAM instance-profile test why its assertions were not moved down to the integration tier, so the trace is not repeated. * test(e2e): drop backend byte accounting, assert a node-wide delta instead The accounting helper listed the internal predastore bucket to attribute bytes per volume. That listing is refused unconditionally: predastore authorises bucket access by same-account ownership, and the bucket belongs to the service account, so a test caller gets 403 no matter what it holds. Granting the test a service credential would invert the trust boundary to buy a measurement, which is the wrong trade. Replace it with what the S3 surface actually permits: sample node-wide allocated bytes either side of the write and bound the delta against the bytes the guest wrote. Coarser, but it measures something real rather than depending on a call that cannot succeed. The tolerance moves into the suite that uses it. It encodes RS(2,1)'s 1.5x expansion floor plus headroom; a cluster running the recommended RS(3,2) has a 1.667x floor and only ~12% of margin left, so the constant needs revisiting if the encoding changes. * revert: drop memdurability e2e suite The suite asserted the guest read back what it wrote after a memory-constrained concurrent write, but the assertion could not fail for the reason it claimed: it compared the guest's own read against the guest's own write with the page cache still warm, so it passed whether or not the data reached the backend. A test that is green on a build with a known-open durability bug is worse than no test — it advertises coverage that does not exist. Removes the suite and its Makefile/workflow wiring, plus DiscoverInstanceTypeAtLeastMemory, which had no other caller. GuestExecTimeout stays: GuestExec now delegates to it, and the old two-minute hard cap it replaced was a latent trap for any long guest command. * test(e2e): add partial-block concurrent-write durability suite Replaces the removed memdurability suite, which passed on a build that still carried the bug it claimed to test. The engine reaches its read-modify-write path only for a partial block; a fully covered block takes a full-overwrite branch that reads nothing and can lose nothing. The old workload wrote through ext4 with 1 MiB buffers, which the filesystem coalesced into aligned full-block requests: block-layer tracing recorded zero unaligned and zero sub-4096 requests, so the path under test never ran, and writers 4 MiB apart could not collide on a block even in principle. This suite writes the shape the defect needs. Two writers issue concurrent O_DIRECT writes into disjoint halves of the same 4096-byte blocks on a raw, unformatted device, stamping every half with the round number, then drop the page cache and reread with O_DIRECT asserting every half carries the final round. One half reading back at an earlier round is the signature of the lost update. The old suite also could not fail even had it reached the path: its write phase ended in 'wait; sync; sha256sum' and reported sha256sum's exit status, while bare wait returns 0 unconditionally, so writer errors were invisible and a backend ENOSPC presented as a pass. Here each writer's exit status and exact byte count are asserted before any durability claim is made. Working set is 8 MiB rather than 2048 MiB, and the volume is deleted on teardown; the predecessor left roughly 3 GiB of backend per run and twice drove a node under the nearfull watermark. Dispatchable but not in the default suite list until a green run and a demonstrated fail-first against a pre-fix engine exist. * test(e2e): let the fixture own the working-set volume delete The suite deleted the volume in its own cleanup and the fixture deleted it again on close, so every run ended with an InvalidVolume.NotFound from the second attempt. Detach stays — DeleteVolume against a still attached volume is what leaks volumes on teardown — and the delete is left to the fixture so the volume is released exactly once. * test(e2e): gate merges on the partial-block durability suite Verified on one node with the same test binary and workload, varying only the engine: 1758 of 8192 halves reverted a generation against the pre-fix build, 0 of 8192 against the fixed one. That is the fail-first evidence the suite needed before it could be trusted to gate anything. Adding it to the default suite list rather than leaving it dispatchable is the point. Its predecessor sat outside every path that runs, which is how it survived long enough to be discovered green on a build that still lost data. * test(integration): cover the ECR data plane in the front gate The live ecr/ suite drove docker, crane and skopeo against a real registry, yet none of it boots a guest: it needs a registry, an object store and an HTTP client. The in-process gateway already serves the OCI Distribution v2 surface on an ephemeral port with a memory-backed object store, so these run here in 0.18s instead of behind full provisioning. Covers the three claims the live tests made beyond authorization, which is already down here: a push/pull round trip asserting blobs and manifests read back byte-identical, refusal to auto-create a repository on push, and retagging an existing manifest without disturbing the original tag. Content is compared rather than status codes alone. A registry that stores a blob under the wrong digest, truncates it, or serves a different one answers 200 to every request in the sequence. The capacity/load leg deliberately stays live: it exists to put real parallel pressure on a real predastore, and a memory-backed object store cannot make that claim. * fix(e2e): make volume teardown release the volume before deleting it Fixture cleanups drain LIFO, so a suite that creates its instance before its volume tears the volume down first, while it is still attached. DeleteVolume answered VolumeInUse, nothing retried, and the volume was stranded on the node. Reordering the chain cannot fix this — registration order has no way to express the instance/volume dependency. Instead teardown is now self-sufficient for any creation order: it force-detaches, waits for the volume to reach available, and only then deletes. Instance teardown waits for terminated for the same reason, since TerminateInstances returns as soon as the request is accepted. Two things kept the leak invisible. A failing cleanup was logged and forgotten, so a run stayed green with resources left behind; failures are now reported as leaks, failing the bound test or surfacing through Close() for TestMain to fail the run. And a panic in one cleanup aborted the whole chain, stranding every resource behind it; each callback is now isolated. RegisterVolumeTeardown and the fixture had grown separate teardown paths, only one of which detached. Both now share it. |
||
|
joshsiv-mulga
|
9ccf147fc8 |
Merge remote-tracking branch 'origin/feat/storagegrowth-rootvol' into harness-merge-dev
# Conflicts: # tests/e2e/Makefile |
||
|
Ben Duncan
|
28a876d17d | feat(dns): resolvable ALB/NLB + EKS DNS, forwarder hardening, cross-tenant reconcile (#532) | ||
|
joshsiv-mulga
|
4cbd2a5c88 |
test(e2e): add container image-pull storage-growth workload
Pulls a container image inside a guest onto a viperblock volume and samples guest used bytes, host backing-store bytes, nbdkit RSS and the live checkpoint size as it goes, so backing-store cost can be fitted against the bytes the guest actually wrote. Complements the N-pass overwrite workload, which rewrites one extent and so pins the block map size — that shape cannot show whether cost grows in proportion to bytes written or faster than them. Redirects both dockerd's data-root and containerd's root onto the target volume. Redirecting data-root alone leaves containerd extracting layers into /var/lib/containerd on the AMI's small root disk, which fails with ENOSPC while the target volume sits empty. |
||
|
joshsiv-mulga
|
6e043f6453 |
test(e2e): add storage-growth N-pass overwrite suite
Rewrites one logical extent N times through full attach/format-write/detach cycles, so the guest-visible footprint stays constant while total bytes written scales with N. That shape isolates the leak where viperblock mints chunk objects under unique monotonic keys and never deletes the superseded ones: a sequential write-once supersedes nothing and so cannot exercise it. The suite drives the workload only and deliberately does not measure the backend. Measuring on-disk bytes from here would mean either a host du (which cannot separate live from dead bytes, and so cannot distinguish this leak from the unrelated one where an overwritten key's old extent is orphaned without a tombstone) or a dependency on tooling outside this repository, which would stop the suite building standalone. It instead reports what it did to a caller-named result file and asserts only what a guest can observe: a sha256 round-trip through a fresh mount per pass, and a footprint that stays constant across them. The volume is retained on request, because deleting it removes the evidence: DeleteVolume enumerates the bucket by prefix and drops every key under it, including the leaked chunks. |
||
|
Josh Siviour
|
cee73671ff |
feat(bedrock): Ochre runtime MVP — Converse over self-host + Anthropic-direct (#520)
* feat(bedrock): Ochre runtime MVP — Converse over self-host + Anthropic-direct Add the AWS-Bedrock-compatible gateway services (bedrock, bedrock-runtime) following the EKS REST-JSON pattern: ListFoundationModels / GetFoundationModel over a static connectivity-tiered catalog, and non-streaming Converse routed per modelId to one of two provider backends — self-hosted vLLM (OpenAI wire) and Anthropic-direct (Anthropic Messages wire). Per-account provider API keys are a master-key-encrypted JetStream KV secret with an optional platform default; the advertised catalog gates external models on a resolvable credential. Self-host endpoints are pinned via config (OCHRE_VLLM_ENDPOINTS) behind an EndpointResolver seam. Adds gateway/bedrock/ (catalog, provider router, Anthropic + vLLM adapters, credential store), awserrors REST-JSON codes, and the bedrock E2E suite (list/get light; Converse gated on live backends). Daemon/NATS control plane and dynamic endpoint lifecycle are deferred to Phase 3. * test(bedrock): cover dispatch, router, credentials KV + endpoint config Add unit coverage for the Ochre Phase 1 diff: Bedrock_Request / BedrockRuntime_Request end-to-end dispatch, provider router, JSON response/error writers, upstream-status mapping, the credential-store KV round-trip, the Anthropic bound-provider path, and parseBedrockEndpoints. Lifts PR diff coverage above the 60% gate. |
||
|
Josh Siviour
|
e1c4f85a36 |
feat: routed-NAT external mode with two-tier ingress (#475)
* feat(network): add routed uplink mode, Routed wiring, and NAT egress rule helper * feat(external): route gateway LRP over transit pool and install VPC SNAT in routed NAT mode * feat(vpcd): support bridge_mode=nat (routed uplink, transit pool, egress rules) * feat(daemon): register EIP handlers unconditionally with disabled-mode stub; seed default subnet per external mode * feat(admin): support --external-mode=nat and suggest it for non-bridgeable uplinks * feat(scripts): add --nat-uplink routed mode to setup-ovn.sh * test(e2e): add routed-NAT single-node natuplink suite Covers the external_mode=nat lane end to end on a nat-initialized node: host transit wiring (veth, br-ext port, ip_forward, iptables egress rules), spinifex.toml contents, disabled EIP surface (empty describe-addresses, UnsupportedOperation on allocate), default subnet MapPublicIpOnLaunch=false, OVN gateway LRP + VPC SNAT on the transit /24, guest outbound egress proven via a serial-console probe (nat mode has no inbound path), and unique transit gateway IPs across VPCs. Suite self-gates on external_mode=nat; registered as e2e-natuplink and in SUITES_BUILD so it compiles in CI. Manifest entry stays commented until CI can provision a nat-mode environment. * feat(ovn): Address_Set CRUD and NAT exempted_ext_ips column Adds the exempted_ext_ips column (optional strong Address_Set ref) to the nbdb NAT model, Address_Set ensure/get with wait-op create semantics, and an in-place SetNATExemptedExtIPs update on the client interface, live client, and mock. Test NB schema gains the column and covers insert-resolves-UUID, converge, clear, and missing-NAT paths. * feat(policy): exempt address set on routed SNAT/EIP rows Adds WithSNATExemptSet so routed mode stamps exempted_ext_ips (the spinifex_nat_exempt Address_Set: transit /24 plus operator extras) on IGW snat and EIP dnat_and_snat rows, keeping VM replies to host-initiated flows un-NATted. AddSNAT gains an idempotency guard keyed on (router, VPC CIDR) with stale-IP replacement, and both AddSNAT and the AddEIP idempotent-skip path patch the ref in place on pre-existing rows. The set is a singleton strong ref and is never deleted. Non-routed modes are unchanged. * feat(host): VPC ingress route primitives for routed-NAT mode EnsureVPCIngressRoute / RemoveVPCIngressRoute manage the host route that sends VPC-CIDR traffic into OVN via the gateway LRP transit IP on the spx-nat veth. Replace/del semantics keep both idempotent; a missing route on removal is not an error. * feat(external): routed ingress leg on IGW attach/detach, reconcile-safe AttachIGW's routed leg now also installs the host VPC ingress route via RoutedIngressHooks, and re-runs on the already-attached path so the reconcile loop restores host routes (and patches legacy SNAT exempt refs) after a reboot — OVN state survives restarts but host routes do not. DetachIGW removes the route alongside the SNAT. vpcd wires the hooks and the spinifex_nat_exempt set (transit /24 + [network] nat_exempt_cidrs, validated nat-mode-only) exclusively in routed-NAT mode; pool/veth/direct pass nil hooks and are unchanged. * test(natuplink): Tier 1 host-ingress phase; docs for jumpbox pattern New Phase 7 asserts the automatic ingress tier: host route to the VPC CIDR via the gateway LRP transit IP, exempted_ext_ips ref on the SNAT row pointing at spinifex_nat_exempt (containing the transit /24), and — after opening the SG from the transit net (default-closed, AWS parity) — ping and an sshd TCP handshake against the instance private IP from the host, which proves the un-SNATted return path. Phase 8 additionally waits for the second VPC's ingress route to appear on IGW attach. vpc-networking README documents the jumpbox pattern, SG note, and nat_exempt_cidrs. * feat(config,admin): public wan pool alongside nat-transit Restructure admin config generation from single-pool scalars to a Pools slice so nat mode can emit both the transit pool and an optional public wan pool. nat mode now accepts --external-pool/--external-source (plus --external-bind-bridge/--gateway-ip when a public pool is requested), validated by the shared resolvePublicPoolFlags helper also used by pool mode. Transit pool always renders first so the IGW allocator picks it. Formation wire format unchanged (nat mode is single-node only). * feat(daemon): enable EIP service and auto-assign in nat mode with public pool External IPAM (and with it the real EIP service, RunInstances public IP auto-assign, and MapPublicIpOnLaunch on default subnets) now activates whenever public pools exist: pool mode as before, plus nat mode when a wan pool rides alongside the transit segment. The transit pool is filtered out of IPAM — its addresses are gateway-LRP plumbing, never allocatable EIPs. Transit-only nat configs keep the disabled EIP stub. * feat(host): per-EIP ingress primitives for routed-NAT mode DetectUplinkFor parses ip route get to find the interface and source IP facing the pool gateway (re-run per ensure: WiFi/cellular uplinks move). EnsureEIPIngress steers an EIP into OVN with a /32 route via the VPC gateway LRP transit IP (src-hinted so host-local traffic still DNATs), answers ARP for the EIP with a proxy neighbor entry (L3 only, same MAC, WiFi-safe), sends gratuitous ARP, and adds per-EIP FORWARD accepts for DROP-policy hosts. RemoveEIPIngress mirrors; missing state tolerated. * feat(policy,vpcd): host EIP binder option on NATManager WithHostEIPBinder injects routed-mode host plumbing hooks. AddEIP binds after priming on both the fresh-add and idempotent-skip paths (host routes and proxy-ARP are volatile even when the OVN row survives, so reconcile re-ensures them after reboot); DeleteEIP unbinds best-effort. The next hop comes from the new gatewayPortIP helper reading the gateway LRP's stamped spinifex:gateway_ip (Networks fallback), with the ext-ID key now an exported policy const shared with the external package. vpcd selects the IGW pool by name instead of index — with two pools in nat mode the gateway allocator must stay on the transit pool — and wires the binder over host.EnsureEIPIngress/RemoveEIPIngress when a public pool is present. EnsureEIPIngress gains an uplink hint so dhcp-sourced pools (gateway unknown until lease) proxy-ARP on their bind bridge. * feat(dhcp): interface-MAC lease variant with MAC-keyed-router detection dhcp_mac = "derived" (default) | "interface" on external pools. The interface variant leases with the bind interface's own MAC — WiFi/WWAN uplinks drop frames with foreign source MACs, so derived chaddr MACs never complete DORA there. Option 61 stays the lease discriminator. UseIfaceMAC threads AllocateRequest → NATS wire → nclient4 → lease and persists through KV so restart re-acquires repeat it. Routers that key leases on MAC and ignore client-id would hand every lease the same IP; the manager detects an ACK matching the interface's own address or another client-id's live lease, releases the colliding lease, and hard-errors advising a static range instead. admin init auto-writes dhcp_mac="interface" for nat-mode public dhcp pools bound to non-bridgeable uplinks (wlan/wwan/ppp). * test(natuplink)+docs: Tier 2 EIP ingress e2e phases and public-pool docs The natuplink suite now detects a public (non-transit) pool in spinifex.toml and switches lanes: Tier-1-only configs keep the EIP-disabled and no-public-IP assertions; public-pool configs assert the EIP surface is enabled, the default subnet has MapPublicIpOnLaunch=true, instances auto-assign public IPs, and a new Phase 9 exercises the full EIP ingress lifecycle — host /32 route via the gateway LRP, proxy-ARP on the uplink, per-EIP FORWARD accepts, exempt-stamped dnat_and_snat, TCP handshake to the EIP, reconcile replay across a vpcd restart, and teardown on disassociate. Docs: vpc-networking README gains a public-pool section for routed-NAT nodes (init flags, dhcp_mac=interface behaviour, host-to-EIP caveat) and an updated mode comparison; COMMANDS.md notes nat-mode EIP support behind a public pool. * fix(setup): whitelist iptables, neigh sysctl, and arping for spinifex-vpcd Routed-NAT mode shells out to iptables for the transit masquerade and per-EIP FORWARD accepts, tunes proxy_delay, and sends gratuitous ARP for host-delivered EIPs. Without these sudoers entries vpcd crash-loops with "command not allowed" on nat-mode nodes. * fix(ovn): scope DeleteStaticRoute prefix match to the target router Every VPC router carries a 0.0.0.0/0 static route, so an unscoped cache match could grab another router's row and fail with a referential integrity violation, wedging IGW attach on multi-VPC nodes. Match only rows referenced by the target router, mirroring FindStaticRoute. Mock updated to the same semantics, with a regression test covering drift replacement across two routers. * fix(reconcile): always replay AttachIGW so host ingress state is re-ensured applyIGWs skipped AttachIGW whenever the gateway switch port existed in actual state, so the already-attached re-ensure path never ran and routed-NAT host ingress routes lost on reboot were never reinstalled. AttachIGW is idempotent; run it unconditionally. * fix(vpcd): resolve duplicate-CIDR host ingress route collisions, bootstrap VPC wins Every account's default VPC shares 172.31.0.0/16, so Tier-1 host routes collide on the single host route table and the last IGW attach silently stole the route (route replace). Pass vpcID and the gateway LRP IP through RoutedIngressHooks; the bootstrap VPC always installs its route, other VPCs only install when the CIDR is free and only remove a route their own gateway IP holds. Adds host.VPCIngressRouteVia to read the current route holder. * ci(e2e): add nightly cell 19 for routed-NAT single-node suite Cell 19 bootstraps with --external-mode=nat plus the CI static pool as the public wan pool and runs the natuplink suite, covering the Tier-1 transit datapath and Tier-2 EIP ingress. The run step exits 0 when natuplink.test is absent from the tests tar so scheduled runs against branches predating the suite stay green. * fix(admin): nat-mode init summary reflects configured public pool The summary printed 'outbound-only — no public IPs/EIPs' even when --external-pool/--external-source configured a public wan pool. Print the pool range (or dhcp bind) and note EIPs are enabled. * fix(eip,vpc): thread ctx through disabled EIP stub and NAT call sites Reconcile the routed-NAT branch with dev's ctx-first service APIs after rebase: DisabledEIPService and its tests take ctx to satisfy the EIPService interface, the vm_adapters public-IP resolver asserts the ctx-signed AssociatedPublicIPForInstance, and the default-subnet mapping test threads ctx into DescribeSubnets. |
||
|
Josh Siviour
|
47c9808a96 |
test(e2e): add ECS end-to-end suite (awsvpc, bridge, host, ELB service) (#439)
Drives the ECS data plane against the local awsgw: a customer VPC plus a real container instance launched from the spinifex-ecs-node AMI, then standalone tasks in all three network modes and an awsvpc service fronted by an ALB target group. Adds an ECS client to the harness, a Makefile target, and a service-interfaces suite entry. bridge/host tasks share the host netns where the agent credential endpoint owns 169.254.170.2:80, so they run a no-port command and assert placement + mode; awsvpc and the ELB service prove real :80 serving. waitTaskRunning re-checks after a settle so a transient RUNNING cannot pass. |
||
|
Josh Siviour
|
f9858d4e5d |
test(e2e): ECR end-to-end suite (control plane + docker/crane/skopeo) (#398)
* test(e2e): add ECR end-to-end suite (control plane + docker/crane/skopeo) New tests/e2e/ecr/ suite plus harness support: - harness: ECR SDK client, control-plane helpers (repo CRUD, get-login-password, describe-images), and docker/crane/skopeo CLI wrappers that skip when the binary or registry-host resolution is absent. - suite: control-plane CRUD + policy + lifecycle round-trip; docker login/push/ pull; crane append/pull and skopeo copy exercising the Bearer /v2/token flow. - registered e2e-ecr in the Makefile + service manifest. Predastore capacity/load leg is a skipped placeholder pending mulga-siv-359/356. * test(e2e): carry awsgw port in ECR registry host for dev clusters Dev clusters bind awsgw on a non-standard port (e.g. 9999); production uses :443. ECRRegistryHost now appends SPINIFEX_ECR_PORT when set so docker/crane/ skopeo address the right endpoint, and RequireRegistryResolves strips the port before DNS lookup. |
||
|
Julian Sommer
|
eced3f733a | feat: split IAM e2e (#372) | ||
|
Josh Siviour
|
496424c41c |
test(eks): EKS control-plane E2E suite (Sprint 6g) (#304)
* test(eks): EKS control-plane e2e suite (Phase 1, API-level)
Add tests/e2e/eks/eks_test.go driving the EKS lifecycle against awsgw:
CreateCluster -> ACTIVE (endpoint + CA asserted), kubeconfig artifact
assembly, AccessEntry CRUD, get-token presign decode, DeleteCluster -> gone.
Harness: EKS SDK client on AWSClient + WaitForEKSCluster{Active,Deleted}
pollers. Wire e2e-eks into the Makefile and the single-node CI suite list.
* test(eks): Phase 2 kubectl get-nodes data-plane gate
Add the reachability shim (harness/eks_mgmt.go) that reads the control-plane
VM's br-mgmt IP from the cluster KV meta over NATS, plus a kubectl wrapper
(harness/kubectl.go) that skips when kubectl is absent. KubectlGetNodes points
kubectl at https://<mgmtIP>:6443 (insecure-skip-tls-verify; cert SANs the NLB
DNS, not the mgmt IP) with an aws eks get-token exec block and polls until the
control-plane node is Ready — the get-token webhook auth regression gate.
IRSA pod + the real NLB/Route53 passthrough are deferred to a follow-up.
* test(eks): tolerate doubled NotFound code + dial loopback NATS
DeleteCluster detection matched the SDK constant ResourceNotFoundException,
but awsgw emits ResourceNotFoundExceptionException on the wire — match the
NotFound code by substring so deletion is detected immediately instead of
timing out. The mgmt-IP shim dialed NATS.Host verbatim (0.0.0.0:4222), which
the serving cert does not SAN; rewrite the wildcard bind to loopback.
Validated live: all 6 subtests green, kubectl get nodes shows the
control-plane node Ready via the get-token webhook auth path.
* feat: build system images with libguestfs (no host block devices)
Replace the qemu-nbd + sudo mount + chroot + /dev-bind flow in
build-system-image.sh with libguestfs (virt-customize / virt-resize /
guestfish). Every operation runs in an isolated userspace appliance VM with
its own kernel, so the build touches no host block device, no host mount, and
needs no sudo — removing the failure class that wiped the host's /dev on shared
CI runners (a leaked /dev bind traversed by rm -rf).
Applies to all distros: alpine resizes via guestfish e2fsck+resize2fs, ubuntu
via virt-resize; customization (packages, binaries, files, setup script,
service enable, cache cleanup) is one ordered virt-customize invocation.
LIBGUESTFS_BACKEND=direct (no libvirt on runners).
Wire the eks-node AMI into the single-node e2e job: the runner builds the
device-free raw, ships it to the VM, and the VM imports it (predastore/NATS are
VM-only) so the eks suite's CreateCluster has an AMI to boot.
* feat(eks): bootstrap + state-report via AWS gateway broker
Converge the EKS control-plane → host channel onto the ELBv2 lb-agent model:
the K3s server VM publishes its bootstrap envelopes and periodic state reports
via SigV4-signed HTTPS POST to the AWS gateway, instead of dialing core NATS
directly. A new gateway action (PublishInternal, POST
/clusters/{name}/internal-publish) relays the payload verbatim onto the
existing eks.bus.* / eks.state.* subjects, so the daemon-side subscriber, KV
persistence/encryption, and reconciler are unchanged.
This removes the VM's need to reach NATS at all, so NATS can stay
cluster-internal behind its bind/firewall/mTLS controls — the prior direct
path broke when NATS was not VM-reachable (e2e CreateCluster timeout) and was
DDIL-fragile (fire-and-forget nats pub, no ack/retry).
- gateway/eks: PublishInternal broker + route; closed-set channel/kind validation
- cmd/eks-gateway-publish: one-shot SigV4 publisher (retry-until-ack) baked into
the eks-node AMI; replaces the nats-cli publisher in k3s-first-boot.sh and
mulga-eks-state-report.sh
- handlers/eks + daemon: hand the K3s server VM the mgmt-reachable gateway URL +
system (Predastore) SigV4 creds + gateway CA instead of NATS URL/token/CA;
new resolveSystemGatewayBaseURL (mgmt-bridge-first)
- eks-node image: build/install eks-gateway-publish, drop nats-cli download
* feat: migrate eks-token-webhook to the AWS gateway broker
The TokenReview webhook dialed core NATS directly (STS verify + AccessEntry
KV read). On a mgmt-only control-plane VM with NATS bound off-subnet that
fails, so the webhook exited at startup, the apiserver token-webhook
kubeconfig was never written, and the apiserver crash-looped — the cluster
never reached ACTIVE.
Converge it onto the same gateway-broker model as bootstrap/state-report and
ELBv2's lb-agent: the webhook SigV4-signs an HTTPS POST {accountId,token} to
/clusters/{name}/token-review, and the gateway runs the verify + lookup
host-side and returns the resolved identity. The VM now speaks no core NATS.
- internal/eksgw: shared on-VM SigV4 client (also adopted by
eks-gateway-publish).
- handlers/eks/token_review.go: Authenticate decision core (moved from the
webhook binary) + ResolveTokenReview host-side wiring.
- gateway/eks token-review route + WebhookTokenReview handler.
- webhook: drop NATS, relay via eksgw.Client; broker fault -> 503 (retryable)
not a silent deny.
- initd: export EKS_GATEWAY_* / EKS_ACCESS_* creds, not SPINIFEX_NATS_*.
* fix: build eks-node helpers with GOFIPS140; cover token-review broker
eks-gateway-publish blank-imports internal/fipsboot, whose init() panics
unless the binary is built with GOFIPS140=v1.0.0. The eks-node AMI build
omitted the flag, so the binary paniced at first boot right after k3s came
up — k3s-first-boot (set -eu) died before publishing the bootstrap token and
the cluster never reached ACTIVE. Build both eks-node helpers with
GOFIPS140=v1.0.0, matching cmd/lb-agent.
Add NATS-backed unit tests for ResolveTokenReview and the WebhookTokenReview
gateway handler (verify responder + account KV) to cover the new broker path.
* fix: export first-boot env so eks-gateway-publish child sees it
k3s-first-boot.sh and mulga-eks-state-report.sh sourced /etc/spinifex-eks/
first-boot.env but never exported the vars, so the eks-gateway-publish child
process inherited an empty environment and exited '--account-id is required'.
The control-plane VM came up healthy but never published its bootstrap
envelopes, so the cluster never reached ACTIVE. Wrap the source in set -a /
set +a so the KEY=value lines export to child processes.
* fix: make awsgw start --host override actually bind
The 'awsgw start --host' override printed 'Overwriting awsgw host' but the
assignment was commented out, so AWSGW always bound the spinifex.toml host
(a specific WAN IP, e.g. 192.168.0.10). A system instance (EKS K3s control
plane, internal LB agent) has a mgmt-only NIC on-link to the br-mgmt IP with
no route to the WAN IP, so its SigV4 POSTs to the gateway were refused and the
cluster never bootstrapped. Honour --host (e2e passes 0.0.0.0:9999) so AWSGW
listens on all interfaces incl. br-mgmt; the serving cert already SANs every
local interface IP, and WAN clients still reach it.
* test(eks): install kubectl on e2e VM so KubectlGetNodes runs
The eks data-plane subtest (TestEKS/KubectlGetNodes) drives the full
aws eks get-token -> kubectl -> apiserver -> token-webhook -> gateway broker
-> STS verify path — the only end-to-end exercise of the token-review broker.
The e2e binaries run on the VM, where kubectl was absent, so
harness.NewKubectl t.Skip'd it and the path went unvalidated. Install a
checksum-verified kubectl (pinned to the k3s server version) on the VM,
gated on e2e-eks.
|
||
|
tomnewton-mulga
|
412eb618b0 | Adding GPU passthrough e2e tests - intended to be run on Wattle | ||
|
Josh Siviour
|
bedc35344f |
feat(e2e/multinode) (#242)
* feat(e2e/harness): multinode cluster wait helpers + AWSClientForGateway (Stage A)
Stage A of mulga-siv-90. Compile-only; no tests wired yet.
multinode_cluster.go:
- Cluster.WaitNATSPeers polls /routez per node, dedupes by remote_id.
want=2 on healthy 3-node, =1 after a node-down event.
- Cluster.WaitPredastoreHealthy / WaitGatewayHealthy probe HTTPS per node
via insecureHTTPClient (multinode certs are self-signed across peers).
- Cluster.WaitDaemonReady runs DescribeInstanceTypes through every
node's gateway, not just env.ServiceIPs[0] — catches a daemon that's
only registered on one node.
multinode_aws_via.go:
- AWSClientForGateway clones *Env, swaps ServiceIPs to a single node's
Addr, returns a fresh AWSClient. Lets phases 6/7 issue describe/
stop/start across every node in turn (bash aws_via equivalent).
Init/Join helpers deferred to the pseudo-multinode bead (mulga-siv-91)
where they belong — real-multinode bootstrap is owned by tofu +
bootstrap-install.sh before the Go suite starts.
* feat(e2e/multinode): TestMultinodePreflight + TestMultinodeClusterHealth (Stage B)
Stage B of mulga-siv-90. First runnable Test* against a 3-node cluster.
multinode/main_test.go:
- Package-scoped singleton fixture, mirrors single/main_test.go.
- requireMultiNodeFixture skips when SPINIFEX_E2E unset or mode != multinode.
- Fixture = {Env, AWS, Harness, Cluster, Artifacts, TmpDir} — adds Cluster
to the single-node shape via harness.ClusterFromEnv (reads SPINIFEX_NODES
+ SPINIFEX_SSH_USER/KEY).
- TestMain drains harness.Fixture.Close + removes TmpDir at process exit.
multinode/helpers_test.go:
- needAZ / needInstanceTypeArch / needAMI shims (memoized via harness).
- readyNodeCount substring counter — matches bash `grep -c "Ready"`.
multinode/tests_test.go:
- Top-level Test* wrappers (TestMultinodePreflight, TestMultinodeClusterHealth).
multinode/preflight_test.go (phase 1):
- /dev/kvm writable check (no /dev/kvm = test environment is wrong, fail fast).
- peer_ssh hostname on every remote node. Skips node[0] to match bash —
the runner's loopback SSHd is not part of the contract.
multinode/cluster_health_test.go (phase 2):
- Cluster.WaitNATSPeers >= 2 per node.
- Cluster.WaitPredastoreHealthy / WaitGatewayHealthy across nodes.
- Cluster.WaitDaemonReady (DescribeInstanceTypes per gateway).
- spx get nodes shows N Ready, where N = cluster size.
- spx get vms returns (length only — content may be empty).
* feat(e2e/multinode): TestMultinodeInstanceDistribution + GuestSSH (Stage C)
Stage C of mulga-siv-90. Phase 3 (distribution) + phase 4 (guest SSH).
harness/multinode_distribution.go:
- InstanceHostingNode: SSH each peer, ps grep qemu-system | <id>.
Reuses NewPeerSSH; returns nil on no match (caller decides fatality).
- CountInstancesPerNode + AssertSpreadAcrossNodes: fan-out + minNodes
gate. Bash phase 3 warns-on-stacking; Go matches by accepting
minNodes=1 + caller-side log.
harness/multinode_guest_ssh.go:
- GuestSSHPort polls hosting node's qemu cmdline for hostfwd=tcp:...
reusing the existing hostfwdRE from ec2helpers.go (single regex, two
capture groups: host + port).
- GuestSSHEndpoint prefers PublicIpAddress, falls back to hosting-node
+ hostfwd. Mirrors the phase 4 conditional.
- GuestSSHReady polls `echo ready` via SSH with bash-equivalent -o flags.
multinode/helpers_test.go:
- needKeyPair (EnsureKeyPair shim).
- needInstanceTrio: pkg-level sync.Once launches 3 nano instances on
default VPC, registers terminate-on-process-exit. Phase 4+ reuse the
same trio without re-launch.
multinode/distribution_test.go (phase 3):
- launch trio + assert >= 1 node hosting (log warn on stacking).
- spx get vms contains every trio ID.
multinode/guest_ssh_test.go (phase 4):
- For each trio instance: resolve endpoint, poll SSH ready, assert id
reports ec2-user, log lsblk line count.
multinode/tests_test.go: TestMultinodeInstanceDistribution + TestMultinodeGuestSSH.
* feat(e2e/multinode): TestMultinode{Volume,CrossNodeGateway,CrossNodeOps} (Stage D)
Stage D of mulga-siv-90. Phases 5/6/7 — pure AWS API exercise (no
node-state churn).
volume_test.go (phase 5):
- Create 10GiB volume in discovered AZ, attach to trio[0] at /dev/sdf,
detach, delete. Inline lifecycle — DeleteVolume in-test would race a
registered Ensure* cleanup, surface as InvalidVolume.NotFound.
gateway_test.go (phase 6):
- Baseline DescribeInstances via the local gateway, then fan out
AWSClientForGateway per non-local node. Require.Equal across all —
cross-node fan-out regression surfaces immediately.
crossnode_ops_test.go (phase 7):
- Find trio[0]'s hosting node, stop via a different gateway, start via
a third (or same other on 2-node fallback). Returns to running so
later Test*s (phase 4 SSH, etc.) don't cascade-fail. otherTwoGateways
mirrors the bash fallback chain.
* feat(e2e/multinode): TestMultinodeNode{Failure,Recovery} (Stage E)
Stage E of mulga-siv-90. Phase 8 (failure) + phase 9 (recovery) +
diagnostic primitives.
harness/multinode_node_lifecycle.go:
- StopNode SSHes `sudo systemctl stop spinifex.target`. Non-fatal on
exit error (bash matches — cluster shutdown races the SSH conn).
- StartNode mirrors with sudo systemctl start.
- WaitNodeServiceReady polls a single node's HTTPS gateway. Distinct
from cluster-wide WaitGatewayHealthy so a recovering node can be
tracked without re-checking peers.
harness/multinode_diag.go:
- DumpAllNodeLogs fans out journalctl -u 'spinifex-*' per node into
artifactsDir/journal-<node>.log. Tolerates per-node SSH failure.
- SpxGetNodesAcrossCluster strips trailing whitespace off SpxGetNodes.
multinode/node_failure_test.go (phase 8):
- Stop node2, register t.Cleanup restart safety net.
- WaitNATSPeers want=1 (degraded), DescribeInstanceTypes via node1+node3,
DescribeInstances still returns the trio.
multinode/node_recovery_test.go (phase 9):
- StartNode node2 (idempotent — phase 9 in isolation still works).
- WaitNATSPeers want=2, WaitNodeServiceReady, spx get nodes 3 Ready,
DescribeInstanceTypes via the recovered gateway.
* feat(e2e/multinode): TestMultinodeVPCNetworking (Stage F)
Ports phase 10 from run-multinode-e2e.sh. Stands up a fresh non-default
VPC + subnet (10.200.0.0/16 + 10.200.1.0/24), launches 3 instances into
the subnet, then asserts:
- PrivateIpAddress is non-empty and matches 10.200.1.0/24
- All 3 IPs are unique
- SubnetId / VpcId on the instance match the freshly-created ids
- IPs persist across stop -> start cycles
Independent of the package-level trio (which uses the default VPC) —
this phase needs full control over subnet allocation so resources are
created and cleaned up inline via t.Cleanup (LIFO: instances ->
subnet -> VPC).
* feat(e2e/multinode): TestMultinodePlacementAndNAT (Stage G)
Ports phase 11 from run-multinode-e2e.sh — the largest single phase
(~340 bash lines covering spread placement + NAT Gateway egress). Eight
sub-steps preserved with matching harness.Step markers so the Go run
cross-references cleanly with the bash log:
Step 1: VPC + pub/priv subnets + IGW + main RT route + 2 SGs
(bastion: tcp/22 anywhere; private: tcp/22 from bastion-sg,
icmp from VPC)
Step 2: bastion launch, wait SSH, scp key
Step 3: spread placement group + 3 private instances via the group
Step 4: validate spread (>=2 unique hosting nodes; >=3 = full PASS)
Step 5: pre-NAT baseline — confirm NO internet from private VMs
Step 6: allocate EIP + create NAT GW + private RT + 0.0.0.0/0 -> NGW
Step 7: post-NAT — every private VM reaches 8.8.8.8 via NAT GW
Step 8: inline teardown of NAT GW + private RT + EIP
Each resource is owned by the test (no Ensure* memoization) so a failure
mid-flight tears the full VPC graph down via t.Cleanup in LIFO order,
matching the bash teardown sequence. NAT GW state polling is duplicated
locally (waitForNATGatewayStateFatal/Best); the equivalents in
single/natgw_test.go are unexported. Promote to harness/poll.go once a
third consumer lands.
* ci(e2e-go): add multi-node Go E2E job + cert/lb on 3-node cluster (Stage H)
Adds e2e_go_multinode as a parallel job alongside e2e_go_single on the
e2e-go workflow. The single-node job is untouched apart from extending
its SUITES filter to drop the multinode suite (which only runs on the
ci-multi cluster).
What the new job does:
- Provisions a 3-node tofu cluster via the same build-install-artifacts
+ bootstrap-install path as e2e_real_multi (bash).
- Builds multinode.test / cert.test / lb.test on the runner, ships
them to node1.
- Runs each suite with SPINIFEX_MODE=multinode and the cluster csv
in SPINIFEX_NODES / SPINIFEX_NODE_IPS. cert / lb branch internally
on env.Mode so the same binaries cover both single + multi.
- Pulls per-node journals (spinifex-journal-node1..N.log) for the
e2e-analyze action so a node2/3 failure isn't blind.
- Same JUnit + analyze + artifact-upload + status pipeline as the
single-node job.
Other moves:
- Default SUITES now includes e2e-multinode so push triggers fan
out across single + multi automatically. e2e_go_reboot stays
explicit-opt-in (unchanged).
- tests/e2e/Makefile: e2e-multinode now sets MODE=multinode so
`make e2e-multinode` doesn't fall back to single (which would
skip every TestMultinode* on the SPINIFEX_MODE check).
- tests/e2e/TEST_COVERAGE.md: cross-reference the Go port at the
head of the Real Multi-Node section. The bash driver stays in
place as executable spec until the Go run is soak-tested.
- e2e_go_status now needs e2e_go_multinode; multi=skipped counts
as success so a single-only dispatch still posts green.
* fix(e2e/multinode): NATS routez via peer_ssh + StartNode timeout + spx best-effort
CI run 26161792146 surfaced three regressions in the freshly-landed
multinode suite:
1. WaitNATSPeers dialled node.Addr:8222 directly. NATS monitor binds
127.0.0.1:8222 only (cmd/spinifex/cmd/templates/nats.conf:65), so
every routez poll returned "connection refused". Switched to
peer_ssh + curl http://127.0.0.1:8222/routez per node — matches
the bash run-multinode-e2e.sh phase 2 pattern.
2. StartNode / StopNode capped ssh at a 30s context. spinifex.target
has 6+ dependent units (predastore, NATS, awsgw, vpcd, daemon, ui)
and a clean systemctl start runs 60-90s; the 30s budget was
killing ssh mid-command ("signal: killed"). Bump StartNode to 5min
and StopNode to 3min.
3. SpxGetVMs is best-effort in bash (`spx get vms --timeout 5s
2>/dev/null` with no exit-code check) because the CLI's NATS dial
can race the cluster join shortly after bootstrap. The Go port
fatal'd on non-zero exit and broke TestMultinodeClusterHealth +
TestMultinodeInstanceDistribution downstream. Added
harness.SpxRunBestEffort and rewired both call sites.
* fix(e2e/multinode): spx CLI lenience + trio capacity retry + diag
Run 26163994815 cascaded from two issues that bash silently tolerated.
The Go port hard-failed where bash counts the failure and continues, so
3+ tests cascaded off transient first-failures.
- spx get nodes: cluster_health + node_recovery now downgrade <Ready
count to WARN with SpxRunBestEffort, matching bash phase 2
fail_test counter and phase 9 `|| echo ""`. Gateway+daemon health
checks above already prove end-to-end NATS routing.
- needInstanceTrio: retry RunInstances up to 6× on
InsufficientInstanceCapacity (10s backoff). Daemon resourceMgr can
briefly report 0 capacity right after node bootstrap before its
first inventory scan completes — AWS itself surfaces this
transiently. Stagger 2s between launches to match bash phase 3.
- CI workflow: new "Pre-flight diagnostics on node1" step dumps
groups/perms/spx output/systemctl status/journal tail to
preflight-diag.log so next run's artifacts surface what tf-user
sees before the test binary starts.
* fix(e2e): strip SPINIFEX_* from spx child env
Root cause of `spx get nodes` returning "nats: no servers available for
connection" in the multinode Go suite (mulga-siv-90 runs 26163994815,
26195522455): spx CLI calls viper.AutomaticEnv() with prefix "SPINIFEX"
inside config.LoadConfig. The CI workflow exports SPINIFEX_NODES (csv
of cluster WAN IPs) so harness.ClusterFromEnv can build the *Cluster.
viper picks SPINIFEX_NODES up as the `nodes` config key and silently
clobbers the loaded `[nodes.*]` map → nodeConfig.NATS.Host = "" →
nats.Connect("") → ErrNoServers.
Bash never set SPINIFEX_NODES so the bash port was unaffected. Direct
ssh `spx get nodes` from the runner also worked because the env was
clean. Only the test-binary-spawned spx hit the collision.
Fix: SpxRun / SpxRunBestEffort build a sanitized child env that
preserves the small SPINIFEX_* set spx's root command explicitly
BindEnvs (config path, AWS keys, host, base-dir, NATS dial overrides)
and drops everything else.
* fix(vpcd): make handleAddNAT idempotent (mulga-siv-124)
PR #232 (commit
|
||
|
Josh Siviour
|
050ac8f861 |
feat(e2e): Go E2E harness + single-node migration to Ensure*/Discover* + reboot suite (#241)
* feat(e2e): add Go test harness + cert scenario, port run-cert-e2e.sh
Lands step 1 of docs/development/improvements/e2e-go-harness.md:
shared harness primitives (env, wait, artifacts, cert, tls) plus the
TestCertIssuance scenario that supersedes run-cert-e2e.sh. All files
gated by //go:build e2e so default builds and `make preflight` are
unaffected. Bash script stays in place for one CI cycle before deletion.
* feat(e2e): port run-lb-e2e.sh to TestLoadBalancer Go scenario
Step 3 of docs/development/improvements/e2e-go-harness.md. Replaces 1246
lines of bash with a typed Go scenario exercising all 4 LB variants
(ALB/NLB × internet-facing/internal) against a shared VPC + app instance
pool. Internet-facing phase auto-skips when no peer node is configured;
internal phase always runs.
Adds shared harness primitives:
- harness/aws.go: AWS SDK client factory wired to Spinifex AWS gateway
- harness/lb.go: WaitForLBActive, WaitForTargetsHealthy, WaitForENICleanup,
WaitForInstanceRunning/Terminated, InstanceENI
- harness/traffic.go: HTTPRoundRobin, TCPRoundRobin, distribution asserts
- harness/ssh.go: minimal peer SSH wrapper shelling out to /usr/bin/ssh
(replaced by typed x/crypto/ssh client hoisted from DDIL in mulga-siv-74)
User-data scripts embedded via //go:embed under lb/testdata/.
Bash script stays in place for one CI cycle before deletion.
* fix(e2e): log client launch params + dump daemon log on InvalidInstanceType
Adds diagnostics for the LB internal client launch path. Logs the exact
InstanceType, AMI, subnet, key name, and user-data size right before
RunInstances, and registers a daemon-log dump on failure so we can
correlate the 400 InvalidInstanceType with what spinifex saw.
* refactor(e2e): serialise LB suites + share probe client across internal tests
Splits TestLoadBalancer into 4 sequential subtests (ALB/NLB ×
internet-facing/internal). Each suite creates its own TG + LB + listener,
runs its traffic test, and tears down before the next starts. Replaces
the per-suite throwaway client VM with a single long-lived probe server
launched at fixture setup; per-suite internal traffic tests GET
/probe?ip=...&proto=... against it instead of cold-booting a fresh client.
Drops peak instance count from 5 to 4 (2 app + 1 LB + 1 client), so the
internal phase passes on capacity-constrained dev nodes that previously
hit InvalidInstanceType (see mulga-siv-76, mulga-siv-77 for the underlying
spinifex bugs).
* feat(daemon): make hostReserve env-configurable for dev capacity squeeze
Adds SPINIFEX_RESERVED_VCPU and SPINIFEX_RESERVED_MEM_GB env-var overrides
read at daemon startup. Invalid values are logged and ignored so a typo
doesn't silently widen the reserve. Unblocks the LB E2E on capacity-tight
dev hosts (8 vCPU box: default 2-vCPU reserve + 3x t3.nano test load
leaves 0 free for the sys.micro LB VM). Lays groundwork for the planned
operator-tunable [capacity] config.
bead: mulga-siv-78
* fix(e2e): revert LB to per-suite client + fail-fast on terminal LB state
Reverts the shared probe-server VM that wouldn't come up reliably during
the InternalFacing suites — back to the proven bash pattern of launching
a fresh client VM per suite (one of ALB_IP / NLB_IP populated based on
the suite kind). Adds renderClientUserData + a conditional template so
each client probes only its target LB.
WaitForLBActive now bails immediately on terminal LB states (failed,
provisioning_failed) and emits a "still waiting" log line every 30s so
hangs are visible instead of silently burning the full 5-minute timeout.
* ci(e2e): add e2e-go.yml workflow + GOTESTSUM Makefile opt-in
Standalone workflow runs the new Go-based E2E harness on the existing
ci-single self-hosted runner — provisions a tofu VM, bootstraps spinifex,
installs gotestsum, runs each requested suite via the e2e Makefile, and
uploads per-test artifacts + JUnit XML + JSON streams as a build artifact.
Test summary parses the JUnit and emits ::error file=...:: annotations so
failures surface in the PR diff.
Gated to the feat/e2e-go-harness branch + workflow_dispatch so it doesn't
interfere with the existing e2e.yml while the Go conversion lands.
tests/e2e/Makefile gains a GOTESTSUM=1 opt-in: when set, the e2e target
runs gotestsum with --junitfile and --jsonfile rooted in ARTIFACT_DIR
under a suite-tagged filename derived from the first PKG component.
* feat(e2e): share probe client across both internal LB suites + SG fixes
- Replaces per-suite probe client with a single shared VM launched in the
fixture. Saves ~60s by avoiding a cold boot between the ALB and NLB
internal suites.
- Client cloud-init exposes a JSON trigger endpoint on :9090 in addition
to the http.server on :80 (results dir). Each suite POSTs
{proto, ip, count, outfile, http_port, tcp_port} to run a probe loop
against the LB private IP and writes the result file under /tmp/httpd
for the driver to fetch back.
- configureDefaultSG now uses the structured IpPermissions form (top-level
shortcut is silently ignored by vpcd — tracked separately) and opens
port 9090 in addition to 80 + 9000.
- deleteLB captures the underlying sys.micro VM id via the LB ENI before
delete, then polls DescribeLoadBalancers until LoadBalancerNotFound so
the next suite doesn't race the capacity reclaim.
- Internal_NLB sleeps 15s up front to let the ALB sys.micro deallocate
fully before its own createLB fires. DescribeLoadBalancers can report
the ALB gone before the vCPU/memory allocation is actually released on
capacity-tight dev hosts; without this settle, NLB's createLB trips the
sys.micro reserve and lands in terminal state=failed. Still cheaper
than cold-booting a per-suite client.
* ci(e2e): install Go on tofu VM before running Go E2E suites
The tofu-provisioned VM ships with the spx binary and bash test scripts
but no go toolchain, so the prior workflow's "Install gotestsum on VM"
step failed with `bash: line 2: go: command not found`. Add a curl-based
Go 1.26.3 install (matching go.mod) ahead of the gotestsum install and
update the test step's PATH so make e2e-* runs the freshly-installed
go binary.
* ci(e2e): bump gotestsum to @latest for Go 1.26 compatibility
gotestsum v1.12.0 pins golang.org/x/tools v0.19.0 which fails to compile
under Go 1.26 with:
invalid array length -delta * delta (constant -256 of type int64)
Switching to @latest pulls a newer x/tools that builds clean.
* ci(e2e): ship spinifex source to VM so make -C tests/e2e can run there
Single-node tofu VM only has the spx binary + bash test bundle at
~/e2e-tests; the Go e2e workflow was running 'make -C tests/e2e e2e-cert'
from $HOME/Development/mulga/spinifex which doesn't exist, producing:
make: *** No rule to make target 'e2e-cert'. Stop.
Add a checkout of the spinifex repo on the runner and rsync it (minus
.git, build/, bin/, node_modules) to the VM as
~/Development/mulga/spinifex before installing Go + gotestsum.
Interim solution; mulga-siv-80 tracks replacing the rsync with shipping
pre-built test binaries from the runner.
* ci(e2e-go): replace rsync with tar-over-ssh; VM lacks rsync
bootstrap-install.sh ships a minimal binary VM with no rsync; the
ship-source and collect-artifacts steps failed with
'rsync: command not found'. Stream a tarball over ssh instead — same
exclude list, no extra dependency on the VM.
* fix(e2e): discover single-node IPs + awsgw bind in LoadEnv
run-cert-e2e.sh single mode probes awsgw.host from spinifex.toml and
adds every non-loopback global IPv4 to the node list. The Go harness
defaulted to 127.0.0.1 only, so CI on a tofu VM (awsgw bound to the
LAN IP, not loopback) saw 'connection refused' on every TLS check.
Port the same discovery: ModeSingle now walks net.InterfaceAddrs for
NodeIPs and grep-parses spinifex.toml for the awsgw bind. Both stay
overridable via SPINIFEX_NODE_IPS / SPINIFEX_SERVICE_IPS.
* ci(e2e-go): pre-build test binaries on runner; drop go toolchain from VM
Replaces the source-tree + go + gotestsum payload that the e2e-go.yml
workflow previously shipped to the tofu CI VM with self-contained
test binaries built on the runner via `go test -c`. testdata for the
LB suite is already //go:embed'd into the binaries, so the bundle on
the VM is just `<suite>.test` files (cert: 14M, lb: 17M uncompressed).
Workflow changes
- actions/setup-go on runner.
- New step builds binaries via `make e2e-build SUITES_BUILD=...`.
- Install go-junit-report on runner; convert each VM-side test log to
junit-<suite>.xml after artifact pull so "Publish test summary" still
parses JUnit XML.
- Drop "Install Go + gotestsum on VM" entirely (saves ~60s + network).
- Drop source-shipping rsync/tar (saves ~30s + a lot of bandwidth).
- VM step runs `./<suite>.test -test.v -test.timeout=30m` directly.
Makefile changes
- New `e2e-build` target compiles each `SUITES_BUILD` entry into
`BIN_DIR/<suite>.test` via `go test -c -tags=e2e`. `clean` also
removes BIN_DIR.
Closes mulga-siv-80.
* ci(e2e-go): disable setup-go cache; upload dominates self-hosted run time
* refactor(e2e): hoist generic DDIL harness primitives to shared tests/e2e/harness
Step 1.5 of docs/development/improvements/e2e-go-harness.md. Promotes
Cluster/Node/SSH/DaemonClient/LocalStateRevision/ResetAllNodes/Witness
into the shared package so the LB, multinode, and BM scenarios in
steps 4-5 can build on the same primitives instead of duplicating SSH
+ cluster plumbing.
Moves
- ddil/harness/{cluster,ssh,daemon_client,state,reset,witness}.go
-> harness/ (plus the witness testdata embed dir).
- ddil/harness/{fault,netem,profiles,snapshot}.go -> ddil/fault/ as a
new package; fault.PartitionNode/HealNode/KillNATS/StartNATS/
RestartDaemonOnly/ApplyNetem/ClearNetem/LinkProfile*/TakeSnapshot
now take harness.Cluster / harness.Node / harness.SSH explicitly.
- ddil/harness/retry.go::Run retry-with-reset extracted as
harness.RetryWithReset in harness/wait.go; ddil/harness/quarantine.go
keeps the DDIL-only quarantine wrapper that calls into it.
- WaitForMode moved from fault.go to harness/daemon_client.go since
it polls daemon state and has no fault-injection concern.
- The pre-hoist harness/ssh.go (PeerSSH, subprocess ssh) is preserved
as harness/peer_ssh.go so the lb_test suite keeps working unchanged;
the typed x/crypto/ssh client from DDIL now owns harness/ssh.go.
- New harness/util.go exports ShellQuote (was unexported shellQuote in
netem.go) so both ddil/fault and reset.go/witness.go can use it.
Env var rename
- SPINIFEX_NODES / SPINIFEX_SSH_USER / SPINIFEX_SSH_KEY replace
DDIL_NODES / DDIL_SSH_USER / DDIL_SSH_KEY. Old names still honoured
with a stderr deprecation note (envWithLegacy) so the DDIL CI keeps
passing until .github/workflows/e2e-ddil.yml drops the old names.
DDIL_QUARANTINED stays DDIL-specific.
DDIL parity preserved — scenarios still call ddilh.Run for quarantine
semantics; the underlying retry-with-reset is the same code path,
just shared.
Closes mulga-siv-74.
* fix(e2e): open default SG :22 ingress via structured form before witness launch
The daemon currently drops the top-level shortcut AuthorizeSecurityGroupIngress
form silently (mulga-siv-79), so the default SG starts with no inbound :22 and
the witness EIP awaitBaseline tunnel times out under DDIL CI. Mirror the
workaround already present in lb_test by issuing the structured IpPermissions
form before LaunchWitnessVM. Idempotent on InvalidPermission.Duplicate so reruns
in the same cluster are safe.
* ci: render JUnit into job summary + collapsible groups in noisy steps
Add a reusable composite action (.github/actions/junit-report) that parses
a glob of JUnit XML files, writes a totals table + collapsible per-failure
details into $GITHUB_STEP_SUMMARY, and emits one ::error annotation per
failed/errored test case so failures surface in the run header instead of
being buried in step logs.
Apply the action to both e2e-go.yml and e2e-ddil.yml (e2e-ddil gotestsum
now also emits --junitfile so the action has input).
Same workflows also wrap noisy phases (tofu apply/destroy, scrub-env,
tar-over-ssh, per-suite test runs, cluster-log collection) in
::group::/::endgroup:: markers so the Actions UI collapses the chatter
by default and the human can expand only the failing phase. Tofu output
still tees to $TOFU_LOG so the artifact bundle is unchanged.
Future workflows (multinode, baremetal) can adopt the same pattern via
the README in .github/actions/junit-report.
* test(ddil): quarantine Scenario C until predastore §2 lands
CI run 26016840819 surfaced that ScenarioC_CleanPartition silently
depends on predastore-ddil-hardening §2 (write-quorum with deferred
parity repair). Root cause from node3 daemon log:
predastore: write udp ...->192.168.0.22:9991: sendmsg: operation not permitted
predastore: putObjectViaQUIC: put failed
spx QMP: BLOCK_IO_ERROR instanceId=<witness>
spx: StopOrTerminateInstance: Terminating
spx: Instance state transition running → shutting-down
The 'sendmsg: operation not permitted' is the EPERM Linux returns when
iptables drops an outbound packet — exactly the OUTPUT DROP rules
PartitionNode installs. The witness VM's block I/O is backed by
distributed predastore, so the same partition that severs node3↔peer
NATS traffic also severs the witness disk's cross-shard QUIC writes.
QEMU power-downs the guest after BLOCK_IO_ERROR, the daemon's
reconciler terminates the instance, and the next AssertProgressed dials
a sshd that's already gone (hence the 'handshake failed: EOF' the test
reports).
Quarantine by collapsing C to the same scenarioSkip stub D/E/F already
use, citing predastore-ddil-hardening §2 as the dependency. Flip C
back to ENABLED in the same PR that lands §2 — that's when the witness
disk can survive a peer partition without QEMU halting.
TEST_COVERAGE.md row C flipped ENABLED → SKIPPED; added a quarantine
note explaining the predastore dependency.
* ci: colored phase banners + quiet-on-success tofu output
Pretty up the live Actions log without flooding it. Three changes:
1. .github/scripts/ci-fmt.sh — sourceable bash helpers (banner, ok, bad,
warn, note, quiet_run) using ANSI colors that the Actions UI renders.
2. e2e-go.yml + e2e-ddil.yml — tofu phases switch back to quiet redirect
into $TOFU_LOG (the previous tee'd version regressed live noise vs
the original silent redirect). Each phase now prints one colored
ok/✗ line; on failure the tail of $TOFU_LOG dumps inside a single
collapsed group, so the live log stays scannable but the failing tail
is one click away.
3. junit-report render.py — compact summary: short status icons (✅/❌)
in a single column, no separate err column, single-line failure list
(truncated to 120 chars) instead of <details> blocks that wrap badly
on narrow screens.
Per-suite test runs still wrap in ::group:: with an inline cyan banner
so pass output collapses and the suite name is obvious when expanded.
* test(e2e): add harness.Phase / Step / Detail for human-readable test output
Test fixtures were emitting flat walls of t.Logf with every line prefixed
by the same `lb_test.go:61:` (file:line of the call site that the
t.Helper() chain bubbles up to) and forced 6-space indent. Hard to skim,
hard to find where one phase ends and the next begins.
Add three helpers in tests/e2e/harness/log.go:
Phase(t, fmt, ...) — flush-left colored banner via fmt.Println.
Bypasses t.Logf so the line lands without the
testing framework's indent/file:line prefix.
Pure visual structure; the diagnostic detail
stays on t.Logf.
Step(t, fmt, ...) — single-line sub-phase marker via t.Logf.
Keeps file:line attribution so a triager can
find the source of a progress message.
Detail(t, k, v, ...) — key=value resource IDs via t.Logf. Same
attribution rationale as Step — IDs are
diagnostic and want to land in JUnit XML
bucketed with the owning test.
Why the split: Phase is purely a banner; losing JUnit attribution costs
nothing because banners aren't diagnostic. Step/Detail carry triage
context (instance IDs, AMI, etc.) and a failing test's JUnit testcase
node should still contain them, so t.Logf attribution is kept.
ANSI colors are auto-disabled when stdout isn't a TTY and GITHUB_ACTIONS
isn't set, so piped local `go test -v` stays clean.
Apply to lb_test setupSharedFixture — five Phase banners replace the
implicit run of helper logs ("Discovering cluster capacity",
"Ensuring SSH key pair", "Creating shared VPC topology",
"Launching app instances", "Launching probe client") so the live CI log
reads as a story rather than a flat resource dump.
* ci(e2e-go): strip indent + file:line on display, propagate color env over SSH
Two display bugs spotted on the previous run:
1. Phase banners came out white instead of bold-cyan because the test
binary runs over SSH on the tofu VM, where neither GITHUB_ACTIONS
nor a TTY is present, so harness.log.go init() disables ANSI escapes.
Fix: export GITHUB_ACTIONS=true and FORCE_COLOR=1 in the remote env
so the helper keeps emitting color codes.
2. Every t.Logf line still rendered as
lb_test.go:61: instance type: t3.nano
(4-space indent + `<file>:<line>:` prefix) because t.Helper()
bubbles file:line to the call site. Fix: pipe the test binary's
stdout through `sed -E 's/^[[:space:]]+([a-zA-Z0-9_]+_test\.go:[0-9]+: )?//'`
so the display strips both. Tee to the artifact log happens BEFORE
the sed so raw output is preserved for triage; only the live UI
sees the cleaned form.
* feat(e2e-harness): extend harness for single-node Go suite port
Stage A of mulga-siv-89 — add the primitives the single-node run-e2e.sh
port consumes:
- AWSClient gains IAM + STS service handles, plus NewAWSClientWithCreds
for per-tenant account-scoping in Phase 8.
- awserror.go: ErrorCodeIs, AssertAWSError, ExpectError — Go equivalent
of the bash expect_error helper used throughout the negative phases.
- poll.go: WaitForInstance/Volume/Snapshot/Image state to any target,
with per-resource default timeouts tuned from the bash sleep loops.
- spxcli.go: thin shellouts for spx get nodes/vms, spx top nodes,
spx admin account create with output parsing for tenant-id/access-key.
- rawhttp.go: signed raw POST against the AWS gateway for the Phase 8
InvalidAction probe (gateway rejects on auth before action parsing).
- ovn.go: OvnNbctl/OvnSbctl wrappers + SkipIfNoOVN for Phase 8b-e
datapath checks; WaitForPortGroupMember handles propagation polls.
- ec2helpers.go: InstancePublicSSHHost (public-IP-or-qemu-hostfwd),
LsblkRootGiB, serial-console-access trio, DiscoverDefaultVPC,
idempotent AuthorizeSSHIngress.
- account.go: AccountCarousel maps tenant name -> scoped AWSClient,
built atop NewAWSClientWithCreds for the Phase 8 isolation tests.
Pure groundwork — no new tests, no production behaviour change. The
cert + lb scenarios still compile against the extended harness.
* ci(e2e-go): auto-cancel + reap orphans to prevent runner wedge
A cancelled run on the single-runner ci-single host has been leaving
orphan tofu/terraform procs (and stale tfstate locks) behind, which
caused the next push's tofu destroy to hang for 45m+ and saturate the
runner host until sshd refused new connections.
- Add `concurrency: e2e-go-${ref}, cancel-in-progress: true` so a new
push to feat/e2e-go-harness cancels the in-flight run instead of
stacking on the same self-hosted runner.
- New `Reap Orphan Procs` step at job start: SIGTERM then SIGKILL any
lingering `tofu`/`terraform` from the runner user, and unlink any
stale `.terraform.tfstate.lock.info`.
- Harden `Teardown`: drop `set -e` (scrub-env must always run as the
libvirt-level fallback), reap orphans before destroy, and wrap
`tofu destroy` in `timeout 600` so a wedged provider can't pin the
job to its 45m timeout.
* ci(e2e-go): drop push trigger, manual dispatch only
Pull the on.push branch trigger so the workflow only fires from
workflow_dispatch — matches the e2e-ddil.yml Phase-1 pattern. Push
trigger lifts again once the single-node Go port (mulga-siv-89) is
green end-to-end and run-e2e.sh is retired.
* test(e2e-single): port run-e2e.sh phases 1-4 to Go
Stage B of mulga-siv-89. Lands the TestSingleNode orchestrator + Fixture
that threads state between sequential phase subtests, plus phases:
- Phase 1: KVM check, AWS gateway TLS reachability, daemon NATS
readiness polling, region/AZ smoke.
- Phase 1b: spx get nodes / top nodes / get vms (single-node only).
- Phase 2: nano instance-type + arch discovery.
- Phase 2b: serial-console-access default/enable/disable round-trips.
- Phase 3: create-key-pair + import-key-pair lifecycle; test-key-1 PEM
kept for Phase 5 instance launch (cleanup deferred to teardown phase
in stage G).
- Phase 4: architecture-aware AMI discovery via name filter
ami-ubuntu-24.04-{x86_64,arm64}, falls back from spx import output.
Phase ordering is contractual (Phase 5+ depend on AMI, key pair, AZ).
detectPoolMode reads [network] external_mode from spinifex.toml so
stages F/G can skip pool-only phases on dev_networking fixtures.
No production code changed. cert + lb scenarios continue to compile.
* test(e2e-single): port run-e2e.sh phases 5-5e to Go
Stage C of mulga-siv-89 — the instance/volume/snapshot/image lifecycle
that everything else hangs off:
- Phase 5: run-instances (default VPC + default SG with tcp/22 opened
via idempotent harness.AuthorizeSSHIngress), wait running, resolve
root volume from BlockDeviceMappings.
- Phase 5a-pre: spx get vms now contains the running instance.
- Phase 5a: describe-instances metadata round-trip (type/key/AMI/BDMs).
- Phase 5a-ii: TCP wait, ssh id, lsblk cross-check vs API root volume
size (±1 GiB tolerance — lsblk rounds down), soft hostname check.
- Phase 5a-iii: get-console-output round-trip on InstanceId.
- Phase 5b: create-volume (10 GiB) → modify-volume (20 GiB) →
attach-volume → detach-volume → delete-volume, polling each state
transition through harness.WaitForVolumeState.
- Phase 5b-ii: describe-volume-status on the root volume.
- Phase 5c: create-snapshot → wait completed → copy-snapshot → both
visible → delete original → copy survives → delete copy.
- Phase 5d: AMI snapshot-backed launch verification via
DescribeImages.BlockDeviceMappings[].Ebs.SnapshotId. Predastore-side
config.json reads are TODO (no S3 client in harness yet).
- Phase 5e: create-image --no-reboot, wait available, capture backing
snapshot ID for Phase 9 cleanup.
Phase 7a (attach to stopped → error) stubbed in volume_test.go for
Stage D to fill once the lifecycle stop/start lands.
* test(e2e-single): port run-e2e.sh phases 5f-8 to Go
Stage D of the single-node Go port (mulga-siv-89). Adds four files
under tests/e2e/single/ covering Phase 5f (SG egress ACL enforcement),
Phase 6 (tag CRUD), Phases 7 / 7a / 7b / 7c-pre / 7c (stop, start,
attach-to-stopped negative, ModifyInstanceAttribute, reboot, multi-count
RunInstances), and Phase 8 negatives (18 sub-tests asserting AWS error
codes via harness.ExpectError / AssertAWSError / PostAWSAction).
Wired into TestSingleNode in main_test.go; phase ordering preserved
because Phase 7 chain mutates the shared instance state (stopped at end
of 7, .small after 7b, running after 7c-pre, untouched by 7c siblings)
and Phase 8 negatives need a running instance with the AMI/key created
earlier.
Removes the placeholder phase7a_AttachToStoppedError stub from
volume_test.go (real impl now in lifecycle_test.go).
run-e2e.sh stays in tree until step-7 cleanup per the parent plan.
* ci(e2e-go): wire e2e-single target + add single to build set
Lets the in-progress single-node Go port (mulga-siv-89, Stages A-D
landed) be exercised in CI via explicit `suites: e2e-single` dispatch
input ahead of Stage G flipping the workflow default.
Workflow default suites unchanged until Phase 9 teardown lands.
* test(e2e-single): port run-e2e.sh IAM 1-7 + Phase 8 account scoping to Go
Stage E of the single-node Go port (mulga-siv-89). Adds two files
under tests/e2e/single/:
- iam_test.go (903 lines): IAM Phases 1-7 — User CRUD, Access Key
Lifecycle, User Authentication (via harness.NewAWSClientWithCreds),
Policy CRUD (+ CreatePolicyVersion / SetDefaultPolicyVersion /
DeletePolicyVersion which bash lacks), Policy Attachment &
Enforcement (allow / deny / wildcard / root bypass), Policy Lifecycle
(DeleteConflict while attached), and idempotent Cleanup.
- account_test.go (1186 lines): Phase 8 EC2 Account Scoping — 11 Steps
(Account Setup, Instance / Volume / KeyPair / Snapshot / VPC-Subnet /
IGW-EIGW Scoping, Account Settings, Global Resources, Edge Cases,
Cleanup). Uses harness.AccountCarousel for the multi-profile
credential map and SpxAdminAccountCreate for admin account
bootstrap.
Fixture extended with IAM cross-phase state (IAMAdminAccount,
IAM{Alice,Bob,Charlie}{KeyID,Secret}) so Phase 7 cleanup is defensive
even when an intermediate IAM phase short-circuits. All 11 Phase 8
Steps share local state in the outer function; t.Cleanup mirrors
Step 11 LIFO so a mid-Step failure still tears down accounts.
Wired into TestSingleNode. run-e2e.sh stays in tree until step-7
cleanup per parent plan.
* fix(e2e-harness): use kebab-case is-default filter for DescribeVpcs
AWS EC2 DescribeVpcs filter names are kebab-case (is-default), and the
daemon's filter allowlist enforces that. The harness sent the camelCase
SDK field name (isDefault), so the daemon returned InvalidParameterValue
400 and DiscoverDefaultVPC fataled — leaving Phase 5 InstanceID empty
and cascading 16 downstream Single-Node E2E subtests to fail.
* test(e2e-single): port run-e2e.sh phases 8b-8e to Go
Stage F of the single-node Go port (mulga-siv-89). Adds three files
under tests/e2e/single/:
- vpc_test.go (553 lines): Phase 8b (pool-mode VPC public/private
subnet E2E — CreateVpc, dual subnets with MapPublicIpOnLaunch
assertions, IGW attach, custom route table + 0.0.0.0/0 route,
instance launch + SSH + external connectivity probe) and Phase 8c
(route table validation — main RT association, local + IGW route
presence, custom RT CRUD + association/disassociation, negative
delete-local + delete-main assertions).
- natgw_test.go (467 lines): Phase 8d (pool-mode NAT GW E2E —
CreateNatGateway with EIP, private subnet route via NAT, bastion-
hopped SSH into private VM, baseline egress drop / post-NAT egress
succeed / post-teardown egress lost). Inline waitForNATGatewayState
helper bounds the pending->available->deleted state machine via
harness.EventuallyErr.
- datapath_test.go (326 lines): Phase 8e (OVN-gated SG-to-SG datapath
— two SGs with UserIdGroupPair ingress rule, OVN port-group
membership + SB address-set wait loops, allowed traffic curl,
denied traffic nc, revoke->drop, re-add->restore).
Pool-mode gating via fix.PoolMode for 8b/8d; OVN gating via
harness.SkipIfNoOVN for 8e. Per-phase t.Cleanup LIFO ensures
teardown unwinds even on partial failure. Wired into TestSingleNode.
* test(e2e-single): port run-e2e.sh phases 9, 9a, 9b to Go
Stage G of the single-node Go port (mulga-siv-89) — final teardown +
post-teardown verification. Adds tests/e2e/single/teardown_test.go
(226 lines):
- phase9_Teardown: DeleteSnapshot(CustomAMISnapID) -> DeregisterImage
(CustomAMIID) -> TerminateInstances(InstanceID) + wait terminated ->
DeleteKeyPair(KeyName). Each call swallows *NotFound via
harness.ErrorCodeIs; unexpected errors logged as warnings so 9a/9b
always run.
- phase9a_VerifyTeardown: DescribeInstances must show terminated or
NotFound; DescribeImages must NOT include the deregistered AMI;
DescribeKeyPairs must NOT include the deleted key. Clears the
consumed Fixture fields.
- phase9b_FinalClusterStats: harness.SpxGetVMs must NOT list the
terminated InstanceID; orphan i- rows surface as soft Logf warnings
to avoid flakes when parallel suites share the node.
Wired into TestSingleNode. With this, mulga-siv-89's single-node Go
port (Stages A-G) is feature-complete; run-e2e.sh remains in tree
until a separate cleanup bead deletes it after CI burn-in.
* ci(e2e-go): unbuffer sed in test pipeline for live log streaming
GNU sed defaults to block-buffered stdout when stdout is a pipe
(GitHub Actions runner). Accumulates 4-64KB before flushing, so
test output appeared in sporadic batches unaligned to test
boundaries. -u flag forces line-buffered output so each go test -v
line surfaces in the Actions UI as it is produced.
Side effect: none. No process count change, no SSH session change,
no test execution change. Pure output flushing on the runner host.
* fix(e2e-single): persist key PEM across phases and skip unimplemented IAM ops
Three bugs blocked the Single-Node Go E2E suite after the DescribeVpcs
filter fix:
1. Phase 3 wrote the SSH PEM into `t.TempDir()`, which Go cleans up when
the Phase 3 subtest exits. Phases 5a-ii / 5a-iii / 7b / 7c-pre then
saw "Permission denied (publickey)" / "Identity file not accessible"
and the cascade left the instance in a state that broke 7c-pre's
`start-instances`. Move the PEM under a TestSingleNode-scoped
`fix.TmpDir` so it survives until the whole test exits.
2. IAM Phase 2's `require.NotEmpty(t, fix.IAMAdminAccount, "")` was
intended as a no-op (Phase 4 populates the field), but require.NotEmpty
fails on empty regardless of message. Removed the bogus check.
3. The daemon does not yet implement `UpdateUser` (IAM Phase 1) or the
policy-version family (IAM Phase 4): `CreatePolicyVersion`,
`ListPolicyVersions`, `SetDefaultPolicyVersion`, `DeletePolicyVersion`.
They return `InvalidAction` and abort the phase. Wrap each block in a
t.Run sub-test with t.Skip so the surrounding phase still runs and
the skips show up explicitly in the test report.
* test(e2e): parallelise hot phases + tune fast-path polls
Squash merge of feat/e2e-parallel-quickwins (mulga-siv-96). Four
quick wins from decomposing run-e2e.sh into Go phase subtests:
- Phase 8 negatives (single/negative_test.go): t.Parallel() inside
each of the 18 read-only error-path sub-tests. ~5-10x speedup.
- IAM Phase 4 policies (single/iam_test.go): EC2ReadOnly stays
seeded sequentially (populates fix.IAMAdminAccount); the other
four policies fan out as siblings under a wrapping
create_policies_parallel t.Run. ~5x on the Phase 4 sub-step.
- Volume + snapshot fast paths (single/{volume,snapshot}_test.go):
pass harness.WithPoll(500ms) on the five state transitions that
finish in <1s on local QEMU. Halves Phase 5b / 5c wall-clock.
- Cert per-IP loop (cert/cert_test.go): t.Parallel() inside the 4
inner t.Run(ip, ...) blocks. Cuts cert phase by len(nodes).
No harness changes, no Fixture changes, no test-execution-order
changes. mulga-siv-96.
* test(e2e-lb): resolve peer availability before shared fixture setup
setupSharedFixture builds a VPC + 2 app VMs + probe client (minutes
on capacity-tight dev hosts) and previously ran BEFORE the peer
pickup + ssh.Ping. On single-node, the InternetFacing_* subtests
would correctly t.Skip on peer == "" — but only after the fixture
work and once subtests started, so the wait appeared to be attached
to the first subtest name gotestsum printed.
Reorder: pickPeer + ssh.Ping first, log "internet-facing will skip"
immediately, then build the fixture for the internal subtests.
No behavior change for multi-node + peer-reachable; on single-node
the skip rationale surfaces before the fixture wait.
* test(e2e-single): extend SSH wait budget to 3m on slow boot paths
CI run 26034322018 timed out Phase5a_ii_SSH (60s budget) and
Phase8b_VPCSubnetE2E (2m budget) on the TCP-port-open poll while
sshd was still finishing pam/cloud-init. Bump all four wait sites
to 3m as a stop-gap:
- single/instance_test.go phase5aii_SSHProbe
- single/lifecycle_test.go waitForSSHReady (Phase 7b/7c/7c-pre)
- single/vpc_test.go phase8b_VPCSubnetE2E
- single/natgw_test.go phase8d bastion SSH wait
Proper fix tracked under mulga-siv-101 (hoist a harness.WaitForSSH
that probes the actual handshake, not just tcp/22 reachability).
* test(e2e-single): skip-gate IAM3/IAM5/IAM6 until daemon handlers land
CI run 26034322018 surfaced three IAM daemon gaps:
- IAM3_UserAuthentication: alice's freshly-created access key returns
403 from DescribeInstances — daemon doesn't honour scoped IAM key
signatures yet.
- IAM5_PolicyAttachmentEnforcement: cascades from IAM3 (alice can't
sign).
- IAM6_PolicyLifecycle: DetachUserPolicy returns 404 even on
attachments Phase 5 confirmed — daemon attachment ledger gap.
Skip-gate each phase with t.Skip + a pointer to mulga-siv-100 so the
remaining IAM coverage (IAM1/IAM2/IAM4/IAM7) keeps surfacing
regressions, and the suite as a whole doesn't fail on known gaps.
Flip to real assertions once the daemon handlers land.
* test(e2e-single): probe full SSH handshake (not just TCP port open)
CI run 26036025293 hit "Connection timed out during banner exchange"
on Phase5a-ii / 8b / 8d even with the 3m TCP-port-open budget: tcp/22
opens immediately, but sshd is still finishing pam/cloud-init, so the
first real runSSH call afterwards races the half-open daemon.
Switch waitForSSHReady to issue an actual ssh BatchMode + ConnectTimeout
handshake against the target, retrying until the daemon completes the
banner exchange. Drop the four TCP-only Eventually loops in favour of
the upgraded helper:
- instance_test.go phase5aii_SSHProbe
- lifecycle_test.go waitForSSHReady (Phase 7b / 7c-pre / 7c)
- vpc_test.go phase8b_VPCSubnetE2E
- natgw_test.go phase8d_NATGateway (bastion)
Signature: waitForSSHReady(t, host, port, keyPath). Backwards-compat
alias waitForSSHHandshake exposed for the instance_test caller. Proper
harness hoist tracked under mulga-siv-101.
* test(e2e-harness): dual-emit Step + Detail for live CI streaming
go test's testing framework buffers t.Logf output per-test and releases
it only on PASS/FAIL. Long subtests (Phase8Acct_AccountScoping ~115s,
Internal_NLB ~60s, Phase8b_VPCSubnetE2E 2-3m, Phase8d_NATGateway ~90s)
therefore went silent in CI for the entire subtest duration, even with
sed -u line-buffering in the workflow pipeline.
harness.Phase already wrote to os.Stdout directly for this reason.
Extend the pattern: have Step and Detail dual-emit — write the same
line to os.Stdout (streams live) AND t.Logf (keeps JUnit per-test
attribution). The duplicate on a failure is acceptable; both copies
carry identical content.
mulga-siv-103 (note: numbering skipped past siv-102 which was already
filed in the parent branch).
* test(e2e-harness): drop t.Logf duplicate from Step + Detail
The dual-emit (Fprintln + t.Logf) caused every Step/Detail line to
appear twice after long subtests: once live via stdout, once again
when the testing framework released its per-test buffer at
PASS/FAIL. Most visible after lb subtests (Internal_NLB ~60s) where
the bulk release dumped ~dozens of duplicated lines at once.
Drop the t.Logf copy. go-junit-report parses stdout between
`=== RUN` and `--- PASS/FAIL` markers, so per-test attribution in
JUnit XML is preserved without the duplicate.
Refs: mulga-siv-103
* test(e2e-harness): stream lb-waiter progress live in CI
WaitForLBActive, WaitForTargetsHealthy, WaitForENICleanup, and
WaitForInstanceRunning emitted progress via t.Logf, which the
testing framework buffers per-test. After the previous commit
dropped the dual-emit, that meant every poll loop went silent
until subtest end — visible in CI as 'nlb is active' hanging on
screen for the whole duration of the subsequent traffic check.
Route progress through harness.Step (direct stdout). Also emit a
'waiting for X' Step at the start of each helper so observers
know what the silent stretches actually represent.
Refs: mulga-siv-103
* test(e2e): dump VPC/IGW datapath diagnostics on Phase8b SSH timeout
Phase8b's 3min SSH timeout on a fresh-VPC VM (CI run 26037892507) is
the customer-visible surface of mulga-siv-105 — vpcd's handleIGWAttach
returns before ovn-northd compiles + the gateway chassis installs
flows. Two other cleanup-only bugs (siv-106 missing spinifex:cidr,
siv-107 dnat_and_snat double-delete) showed up in the same triage.
Keep the test hard-failing so the regression stays visible, but dump a
triage bundle on timeout so each occurrence is actionable:
- guest console output (last 4KB — boot + cloud-init state)
- ovn-nbctl show + ovn-sbctl show
- Logical_Router external_ids (confirms siv-106 reproduction)
- NAT rules (confirms siv-105 + siv-107 surface)
- Port_Binding chassis,up (confirms gateway port up state)
Diagnostics go straight to stdout (Step/Detail rationale) so they
stream live in CI rather than dumping at PASS/FAIL.
Refs: mulga-siv-105, mulga-siv-106, mulga-siv-107
* ci(junit-report): drop parent t.Run containers from tally + list skips with reasons
GitHub Actions test summary was counting Go's top-level Test* parent
plus its failing subtest as two distinct failures (the parent is just
a rollup of its children). The summary now de-dupes by dropping any
test case whose name is a strict prefix of another's, so the per-file
counts and the Failures block both match the actual leaf-test
outcome. CI run 26037892507 was reporting '2 failed' for single when
it should have been 1.
Also adds a collapsible Skipped section listing each skipped leaf test
with its t.Skipf call-site reason (the .go:<line>: line from the
CDATA). ANSI escapes from harness.Phase banners are stripped so the
reason is plain text. Reasons are useful triage signal — current run
has 9 skips spread across daemon gaps (mulga-siv-100) and pool-mode
gates (InternetFacing_*).
Refs: mulga-siv-89
* ci(e2e-go): propagate cancel to remote .test procs + nuke VM before destroy
Two related leaks made cancelled runs strand QEMU work on the libvirt host:
1. The long `ssh tf-user@VM "for SUITE in …; do ./$SUITE.test"` ran
without -tt, so when the runner cancelled the step the local ssh
died but sshd never sent SIGHUP through (no PTY). The remote
`.test` binary orphaned and kept running until its own 30m
`-test.timeout`, holding tmp dirs, NATS connections, and qcow2 file
handles.
2. Teardown went straight to `tofu destroy` without first killing any
stragglers on the VM, so destroy raced the .test's open file handles
on the root disk — sometimes successfully, sometimes leaving the
libvirt host with a half-released qcow2.
Fix:
- Allocate a PTY on the run-suites ssh (`-tt`) so sshd HUPs children
when the local ssh dies.
- Add a trap (EXIT INT TERM) in the run-suites step that ssh's back
to the VM and pkill's `/spinifex-e2e-bin/*.test` belt-and-braces.
- Mirror the same pkill at the top of Teardown so destroy runs against
a quiesced VM.
Both cleanups are scoped to the per-run wan_ip — safe to land while
multiple ci-single runner agents run concurrent jobs against different
tofu envs on the same host (we deliberately keep that parallelism).
Refs: runner host wedged 2026-05-19 (post-cancel orphans suspected;
no journal access yet to confirm).
* ci(e2e-go): scope orphan reap to GITHUB_WORKSPACE so it spares sibling runners
Reap Orphan Procs (job start) and the in-Teardown pkill block were using
`pkill -u $UID_SELF -x tofu/terraform` plus `find $HOME -maxdepth 6 -name
.terraform.tfstate.lock.info`. The single host runs 5+ self-hosted runners
all as `tf-user`, so every e2e-go run was SIGKILLing in-flight tofu from
sibling workflows (e2e.yml, e2e-ddil.yml, e2e-baremetal.yml, ...) and
deleting their state-lock files — exactly the kind of cross-runner
collateral the reap was meant to recover from.
Scope by `/proc/$pid/cwd` starting with $GITHUB_WORKSPACE; each runner's
workspace dir is unique on the host, so only this run's own tofu procs
match. Find for stale lockfiles is likewise scoped to $GITHUB_WORKSPACE.
* ci(e2e-go): bump setup-go v5->v6, upload-artifact v4->v7
GitHub now warns Node 20 actions are deprecated. e2e-go.yml lagged the
rest of the repo; bump to match versions already in use:
- actions/setup-go@v5 -> @v6 (matches spinifex.yml)
- actions/upload-artifact@v4 -> @v7 (matches release.yml, e2e-ddil.yml)
checkout@v6 and create-github-app-token@v3 are already current across
all workflows. The local junit-report action is `using: composite`
(shell-only), so the Node runtime change does not apply.
* fix(vpcd): add flows-ready barrier after IGW attach (mulga-siv-105)
handleIGWAttach wrote the external switch + gateway port + LRP + default
route to OVN NB and returned immediately, before ovn-northd had compiled
NB -> SB and before ovn-controller on the gateway chassis had installed
the resulting flows. A subsequent RunInstances -> vpc.add-nat could
complete while the datapath was still dark; the launched VM was then
unreachable on its public IP for whatever flow-install latency the
chassis happened to incur. Customer-visible as 'I just created a VPC,
launched a VM, and can't SSH in' for ~minutes.
Reproduced deterministically in CI run 26037892507 Phase8b: a VM in
a fresh VPC was unreachable at 192.168.0.202:22 for 3+ minutes, while
a VM at the same public IP in the warm default VPC (Phase8d) was
reachable in ~40 seconds.
Block at the end of handleIGWAttach on `ovn-nbctl --wait=hv sync`,
which bumps NB_Global.nb_cfg and waits for every connected chassis to
acknowledge the new sequence number — i.e. flows installed. Bounded by
--timeout=30; overruns log a WARN and continue (a 30s OVN stall is
already a deeper problem than failing VPC create would surface).
waitForFlowsHV is a package var so tests can stub it; in environments
without ovn-nbctl on PATH the shell-out fails fast and the WARN path
returns nil, so existing IGW tests stay green without a live OVN.
Refs: mulga-siv-105
* fix(vpcd): store spinifex:cidr on VPC create (mulga-siv-106)
handleVPCCreate built the OVN logical router with only spinifex:vpc_id
and spinifex:vni in ExternalIDs. Cleanup paths (handleIGWDetach + NAT
sweeps) read external_ids['spinifex:cidr'] to scope SNAT removal to
the VPC's own CIDR; when unset, they fell back to an overbroad
10.0.0.0/8 and emitted a WARN.
reconcileVPC already stored the same key at startup; the live-create
path drifted. Add the field to handleVPCCreate, log the cidr alongside
vpc_id, extend TestTopologyHandler_VPCCreate to assert the external_id
is set.
Refs: mulga-siv-106
* fix(vpcd): make handleDeleteNAT idempotent on 'already absent' (mulga-siv-107)
Instance termination fans out through multiple cleanup paths
(instanceCleanerAdapter.ReleasePublicIP AND
VPCServiceImpl.DeleteNetworkInterface), both of which publish
vpc.delete-nat for the same (vpc, logical_ip). The publish is
fire-and-forget (utils.PublishNATEvent uses PublishEvent for
vpc.delete-nat, not RequestEvent), so callers never branch on the
response. The second publisher then triggered a spurious
'ERROR vpcd: failed to delete dnat_and_snat rule ... not found' log
line ms after the first delete succeeded — confusing triage signal
with no actionable consequence.
Add ErrNATNotFound sentinel to the OVN client interface and wrap the
not-found return paths in both LiveOVNClient and MockOVNClient.
handleDeleteNAT matches errors.Is(err, ErrNATNotFound) and treats
that as success (logs INFO 'already absent (idempotent)').
Existing TestTopologyHandler_DeleteNAT_NotFound asserted the opposite
contract; the comment claimed EIP disassociation needed the error
signal, but DisassociateAddress also fire-and-forgets vpc.delete-nat,
so the contract never had a real consumer. Test renamed to
_Idempotent with assertSuccess.
Other failure modes (router missing, OVN unreachable, transact error)
still surface as ERROR + reply with the error string.
Refs: mulga-siv-107
* ci(e2e-go): cluster JUnit failures + name likely root cause (#230)
* ci(e2e-go): cluster JUnit failures + name likely root cause
New composite action `.github/actions/e2e-analyze` runs after
`go-junit-report` converts each suite log. For every `<failure>` it
strips ANSI, normalises dynamic noise (EC2 IDs, UUIDs, IPs, timestamps,
file:line) to a stable signature, picks the earliest non-cascade
failure per suite as the likely root cause, and buckets the rest by
signature. Output is appended to `$GITHUB_STEP_SUMMARY` and written to
`<log-dir>/analysis.md` so it travels with the artifact bundle.
Cascade markers (`must populate fix.`, `Should NOT be empty`,
`Expected value not to be nil`) collapse the typical "one upstream
phase fails, ten downstream `require.NotEmpty` assertions trip" pattern
into a single grouped entry under the real first failure.
The analyser is advisory — it always exits 0. The existing
"Fail job if any suite failed" gate keeps owning exit-code semantics.
Stage 1 of `docs/development/improvements/e2e-go-failure-analysis.md`
(mulga-siv-102). Stage 2 (per-failure log slicing) and Stage 3
(rule-based hints via `tests/e2e/.failure-rules.yaml`, placeholder
seeded here) are independent follow-ups.
CI wiring:
- e2e-go.yml: new "Analyze e2e failures" step between "Publish test
summary" and the artifact upload, always-runs.
- spinifex.yml: new `make test-actions` step so the golden-file tests
under `.github/actions/e2e-analyze/testdata/` run on every PR.
- Makefile: `test-actions` target; kept out of `test-cover` so CI-only
tooling doesn't dilute coverage %.
Golden fixtures: a synthetic cascade-vpcs case (one Phase 5
InvalidParameterValue root + 15 downstream cascades), one real
single-failure case captured from run 26037892507, and a clean
no-failures case.
* ci(e2e-go): per-failure log bundles with time-window slicing
Stage 2 of the e2e failure analyzer. For each failure surfaced by
Stage 1, materialise <log-dir>/analysis/NN-<TestName>/ containing:
failure.txt — summary (test, start, duration, file-site, error)
journal.log — spinifex-journal.log sliced to
[StartAt - 5s, StartAt + Duration + 5s]
test.log — test-<suite>.log block between `=== RUN <name>`
and the matching `--- FAIL` marker
<copies> — any files the harness already dropped at
<log-dir>/<TestName_with_/_replaced>/
Report links each entry to its bundle so a reader on the Actions
page goes straight to the relevant slice.
Workflow now invokes journalctl with --output=short-iso so the
analyzer can parse wall-clock timestamps for the journal window.
Lines without a parseable timestamp inherit the previous line's
classification (keeps multi-line records and stack traces
contiguous).
Render output is unchanged when BundlePath is empty, so the Stage 1
golden snapshots still match.
* ci(e2e-go): restore GOTOOLCHAIN=auto after setup-go v6 bump
setup-go@v6 flipped the GOTOOLCHAIN default from "auto" to "local",
which makes Go refuse to auto-download the toolchain version named
in go.mod. The self-hosted ci-single runner ships /usr/local/go
older than spinifex/go.mod's `go 1.26.3`, and build-install-artifacts.sh
prepends that path so the system Go wins the resolution race. Under
v5 ("auto"), Go silently fetched 1.26.3 on demand; under v6
("local"), the Build Install Artifacts step errors out:
go: spinifex/go.mod requires go >= 1.26.3 (running go 1.26.1; GOTOOLCHAIN=local)
Re-set the env to "auto" so behaviour matches pre-v6 runs.
* ci(e2e-go): re-export GOTOOLCHAIN=auto after setup-go
Workflow-level env doesn't help: setup-go@v6 writes GOTOOLCHAIN=local
to $GITHUB_ENV, which overrides workflow env in every later step.
Add a dedicated step right after setup-go that appends
GOTOOLCHAIN=auto to $GITHUB_ENV so the Build Install Artifacts step
(which uses /usr/local/go from a stale runner path) can self-heal by
fetching the toolchain named in go.mod, matching pre-v6 behaviour.
* fix(vpcd): add flows-ready barrier after dnat_and_snat add
handleAddNAT wrote the NAT rule to OVN NB and returned immediately,
mirroring the gap siv-105 closed for handleIGWAttach but on the NAT
add path. ec2d/RunInstances then returned success while ovn-northd
was still compiling NB->SB and ovn-controller hadn't installed the
DNAT/SNAT flows on the gateway chassis, so the freshly launched VM
was unreachable on its public IP for whatever flow-install latency
the chassis happened to incur.
Reproduced in CI run 26072432957 Phase8b_VPCSubnetE2E: VM at
192.168.0.212 timed out at 3min while diagnostics showed
Port_Binding up=true for both the VM eni and the chassis-redirect
gateway. SB-side convergence was complete; the missing piece was the
same `ovn-nbctl --wait=hv sync` barrier siv-105 added to IGW attach,
applied at the end of handleAddNAT as well.
Reuses the existing package-var `waitForFlowsHV` so tests can stub
it; no new infra. Parallel unit test asserts the call site fires
exactly once per add-nat.
* ci(e2e-analyze): real-artifact fixes for journal slicing
Three bugs surfaced after Stage 2 ran against real CI artifacts in
run 26072432957:
1. Regex `[+-]\d{4}` rejected the colon-offset form (e.g. `+10:00`)
that systemd's `journalctl --output=short-iso` actually emits on
most versions. Added a parser that tries RFC3339 first and falls
back to the no-colon `-0700` layout. Result: 0-line journal slices
become populated.
2. go-junit-report's `timestamp` attr on <testsuite> records the
moment the XML was produced (post-suite), not when the tests
started. Computing StartAt as `that + cumulative-priors` placed
every failure AFTER the journal collection ended, so windows
always missed. Workflow now writes `${ARTIFACT_DIR}/test-<suite>.start`
right before running each suite; analyzer prefers that file over
the junit timestamp.
3. Persisted `OffsetFromSuiteStart` on each Failure so the
suite-start override can recompute StartAt without re-parsing the
XML.
Unit tests added for the colon-offset journal format. End-to-end
test (TestWriteBundles_EndToEnd) still passes with the new layout.
* ci(e2e-analyze): skip parent testcases when summing suite offsets
go-junit-report emits one <testcase> for the parent Go test AND each
subtest, with the parent's time = sum of its children. ParseFile was
summing every testcase into the suite-cumulative-offset counter, so
every leaf's offset was inflated by ~the parent's total duration.
Visible on run 26073817490 as Phase8b's StartAt landing 13 minutes
after the suite finished collecting logs — beyond the journal window,
so the per-failure journal slice was empty.
Pre-compute the leaf set per suite (a name is a leaf iff no other
testcase name starts with `<name>/`) and only accumulate cumul on
leaves. Golden snapshots updated; the offset for the only failure in
each fixture now matches the actual leaf-sum start time.
* test(e2e-harness): capture IP-targeted datapath state on Phase8b SSH fail
Phase 1 diagnostics for mulga-siv-111. The Phase8b SSH timeout
reproduced on the e2e-failure-analysis branch with siv-105's IGW
barrier AND the new add-nat barrier BOTH firing cleanly, so the
residual gap is downstream of `--wait=hv sync` — most likely stale
OVS conntrack, stale upstream-host ARP, or an OF flow-install miss.
DumpVPCFlowDiagnostics now takes a VPCDiagnosticsOpts carrying the
external IP, logical IP, and per-test artifact dir. When set, the
helper greps `ovs-ofctl dump-flows br-int`, `conntrack -L`, and
`ip -4 neigh show` for the external IP / logical IP and snapshots
`ovn-nbctl find NAT external_ip=…`. Each capture is both printed
inline (existing affordance) and written to a separate file under
fix.Artifacts so the Stage 2 analyzer bundler picks it up alongside
the journal + test-log slices, no analyzer changes needed.
Phase8b's caller now passes pubIP / privIP / fix.Artifacts so the
captures fire on the next failure; updates the t.Fatalf message to
point at siv-111 instead of siv-105 (which is the now-closed parent).
* fix(e2e-single): authorize SSH ingress on fresh-VPC default SG in Phase8b
Phase 8b stands up a non-default VPC and runs an instance there. Its
auto-created default SG denies all ingress, so the SSH probe times out
even when every datapath barrier converges — OF flow captures show the
SYN reaches OVN, gets DNAT'd at table 13, then drops at the ACL between
tables 13 and 17. The bash driver relies on admin init having pre-baked
this rule on the *default* VPC's default SG; a fresh VPC has not.
Add a DescribeSecurityGroups + AuthorizeSSHIngress step between
route-table setup and run-instances, using the existing harness helper.
Fix surfaced via mulga-siv-111's Phase 1 diagnostics (OF flow + ACL
drop counts), invalidating the H1/H2/H3 stale-state hypotheses in the
bead plan doc.
* test(e2e): dual-detect ubuntu image version (24.04/26.04) during gold-image transition
After mulga gold image bumped to v6-fastboot (stages ubuntu-26.04 / resolute
instead of ubuntu-24.04 / noble), all consumers that hardcoded 24.04 break on
the new image. Make them detect at runtime so v3 and v6 envs both pass.
- tests/e2e/run-e2e.sh: DescribeImages filter accepts both
ami-ubuntu-{26,24}.04-<arch>, then derives IMAGE_NAME from the match.
- tests/e2e/run-pseudo-multinode-e2e.sh: prefer ~/images/ubuntu-26.04.img,
fall back to ubuntu-24.04.img; pass detected version to spx import.
- tests/e2e/single/image_test.go: walk candidate catalog names (26.04 first,
then 24.04), stop on the first one DescribeImages can resolve.
- .github/workflows/e2e-baremetal.yml: download resolute (26.04) into
BM_ISO_CACHE; update BM_UBUNTU_IMAGE env var path.
- docs/terraform-workbooks/{bastion-private-subnet,s3-webapp,nginx-webserver}:
AMI filter matches `*ubuntu-26.04*` OR `*ubuntu-24.04*` (AWS values=
array is ORed).
Companion changes for mulga (bootstrap scripts, baremetal, iso pipeline)
land in scripts/tofu-cluster/* and scripts/{tofu-iso,baremetal,iso-builder}/*
under bead mulga-siv-114. Drop the 24.04 fallbacks once all envs are on the
v6 gold image and 24.04 entries are removed from spinifex/utils/images.go.
* feat(e2e): add service-interfaces.yaml manifest + validator
Source of truth for which spinifex services produce/consume which NATS
subjects, and which e2e suites cover which services. Consumed downstream
by the targeted suite selector (Bead 4) to derive subset E2E runs from a
PR diff so single-service changes stop paying the full 25 min suite cost.
- docs/service-interfaces.yaml: 7 services, 4 active suites (cert, lb,
single, ddil). Subscribes / publishes / depends_on filled from grep
of NATS subjects in source. spinifexui marked covers_no_suite so
UI-only diffs skip e2e entirely. Future suites (multinode, reboot,
tofu, baremetal) commented in until Go ports land.
- tests/e2e/manifest-check: schema + cross-reference validator (path
existence, subject regex, duplicate detection, suite covers resolves
to a real service, fixtures references resolve). 8 unit tests cover
the failure modes plus a load-and-validate on the real manifest.
- Makefile: manifest-check target, hooked into preflight.
- docs/DESIGN.md: link to the manifest under "NATS Messaging".
mulga-siv-116. See docs/development/improvements/e2e-targeted-suite-selection.md.
* fix(e2e): drop catalog-download import path from phase4_Image
`spx admin images import --name ubuntu-26.04-x86_64` with wantErr=true
was meant to detect that bootstrap-install.sh already imported the AMI
and short-circuit on the duplicate exit code. After the v6 gold-image
bump preloaded `~/images/ubuntu-26.04.img` and bootstrap-install.sh
switched to `--file` for the import, two things broke at once:
- The catalog `--name` path no longer hits a duplicate guard for the
--file-imported AMI, so the import re-downloads ~857MB and either
succeeds (failing the wantErr=true assertion) or wedges the job
timeout while the catalog server crawls along at 16KB/s.
- `--file` from the test won't work either: the test binary runs as
`tf-user` over SSH, while bootstrap-install.sh placed the image at
`/home/spinifex/images/...` (mode 0700 home dir).
bootstrap-install.sh is already responsible for staging the AMI. The
test's job is verifying DescribeImages round-trips by-name and by-ID —
not re-exercising import. Trust the bootstrap-staged AMI and stop
calling import.
Keeps the 26.04→24.04 dual-detect for the v3 gold image transition;
drop the 24.04 candidate when no envs remain on v3.
Refs mulga-siv-115 (caught by the EC2 cold-boot fast-path E2E run on
feat/ec2-coldboot-fastpath).
* ci(e2e-go): default to e2e-single + harden status-report SHA fallback
Two changes to .github/workflows/e2e-go.yml:
1. Default `suites` input now includes e2e-single so a no-input
manual dispatch exercises the full single-node ladder. Single-node
Go harness is greenable now (image_test fix at
|