6 Commits

Author	SHA1	Message	Date
Josh Siviour	9f5f877e50	fix: batched hygiene — slog key, ui pid file, race-scaled timeouts, GPU console capture (#637) ... * fix(ec2): rename ambiguous 'code' slog key to firmwarePath The EFI variable store prep log used 'code' for the OVMF firmware path, which reads as an error/status code in log search. Rename to firmwarePath to avoid confusion. * fix(spinifexui): write pid file to a service-owned BaseDir spinifexui.Start() called the legacy utils.WritePidFile, which has no MkdirAll and falls back to $HOME/spinifex. Under the spinifex-ui unit's ProtectHome=yes this directory is neither guaranteed to exist nor writable. Add Config.BaseDir, switch to utils.WritePidFileTo (which does MkdirAll) for Start/Stop/Status, wire it through the CLI as a spinifex-ui-base-dir flag/SPINIFEX_UI_BASE_DIR env var, provision /var/lib/spinifex/spinifex-ui in setup.sh, and add it to the unit's ReadWritePaths. * test(viperblockd): replace fixed sleep with a readiness poll TestEBSConfigQueueGroup_DetachedOpenFails slept 500ms before assuming launchService's ebs.config subscriber was bound, then raced a hardcoded 5s request deadline. Poll with a cheap malformed request (rejected at json.Unmarshal, before the slow S3 path) until the subscriber answers, then issue the real request with room for openVolumeVB's S3 backoff. * fix(e2e): capture GPU worker console log on test failure Wire harness.OnFailure into TestEKSGPUPodExposure to dump the GPU worker's serial console via the established EC2 GetConsoleOutput path, matching lb_test.go's captureLBConsoleOnFailure. A driver or device-plugin hang after boot only ever surfaces on the guest console.	2026-08-02 08:17:18 +10:00
Josh Siviour	cae76ba1b6	test: complete the e2e live-vs-mock rebalance (epic mulga-8oyg3) (#566) ... * test(volume): assert chunk GC stays wired on in CreateVolume GCEnabled was zero-valued at every viperblock construction site for a long time and no test noticed. It is not part of viperblock.VBState, so it never round-trips through a saved config.json and cannot be observed by reading volume state back. Extract the viperblock.VB assembly out of CreateVolume into buildVBConfig so the GC wiring is assertable directly against the returned config, without a live viperblock or S3 backend. The config is returned by pointer because viperblock.VB carries atomic.Uint64 fields that vet's copylocks check rightly refuses to see copied. * test(e2e): snapshot backend byte accounting before volume purge DeleteVolume purges a volume's entire backend prefix, including any chunks a leak left behind, before anything measures it. That is the same masking that hid the storage-growth leak in production: a passing E2E cannot fail on backend growth when the evidence is deleted first. Snapshot the volume's backend chunk footprint in EnsureVolume's cleanup closure, immediately before DeleteVolume, so every volume the shared teardown path purges is measured rather than silently discarded. The snapshot is always taken and logged; the hard ratio check additionally runs for callers that registered a guest-written-bytes baseline, since most callers never attach or write to the volume they create and so have no baseline to compare against. The tolerance is the RS(2,1) erasure floor widened for per-chunk header and tail-chunk overhead. It is sized to distinguish unbounded growth from a footprint settling at the floor, not to catch bounded residual garbage. The check is non-fatal inside the cleanup callback: t.Fatalf's runtime.Goexit would abort the DeleteVolume call queued behind it and turn a reported leak into a real one. * test(e2e): add memory-constrained concurrent-write durability regression The existing durability tests write one 4MiB sentinel, sequentially, on a comfortably sized guest, which is the exact inverse of the known-open data-loss bug: acked writes read back zero-filled after a cold reread when a guest is memory-starved during concurrent writeback. No happy-path test can reach it, because the fault lives in the intersection of memory pressure, write concurrency and cache-cold reread. Add a suite that encodes those three conditions together: a guest discovered at or below the working set, N parallel large writers launched as background jobs in a single command so they genuinely overlap, swap disabled, then sync and drop_caches before rereading. Assertions are per stream rather than aggregate so a failure names the losing writer instead of leaving whoever reads it to re-derive which of N writers lost data from one combined digest. GuestExec gains a timeout-parameterised variant. Its fixed two-minute default is sized for sub-second payloads, and a multi-gigabyte write to a network-backed volume would exceed it, so the suite would have failed by timeout while looking like it had caught the corruption. The budget scales with the working set, and a deadline is reported distinctly from a data mismatch so the two red states are never confused. The suite is dispatchable but deliberately absent from the default SUITES: the bug it reproduces is still open, so it is expected to fail and must not sit in a merge-gating path. It is registered in the workflow allow-list so it stays discoverable rather than being buried behind a skip. Also record on the live IAM instance-profile test why its assertions were not moved down to the integration tier, so the trace is not repeated. * test(e2e): drop backend byte accounting, assert a node-wide delta instead The accounting helper listed the internal predastore bucket to attribute bytes per volume. That listing is refused unconditionally: predastore authorises bucket access by same-account ownership, and the bucket belongs to the service account, so a test caller gets 403 no matter what it holds. Granting the test a service credential would invert the trust boundary to buy a measurement, which is the wrong trade. Replace it with what the S3 surface actually permits: sample node-wide allocated bytes either side of the write and bound the delta against the bytes the guest wrote. Coarser, but it measures something real rather than depending on a call that cannot succeed. The tolerance moves into the suite that uses it. It encodes RS(2,1)'s 1.5x expansion floor plus headroom; a cluster running the recommended RS(3,2) has a 1.667x floor and only ~12% of margin left, so the constant needs revisiting if the encoding changes. * revert: drop memdurability e2e suite The suite asserted the guest read back what it wrote after a memory-constrained concurrent write, but the assertion could not fail for the reason it claimed: it compared the guest's own read against the guest's own write with the page cache still warm, so it passed whether or not the data reached the backend. A test that is green on a build with a known-open durability bug is worse than no test — it advertises coverage that does not exist. Removes the suite and its Makefile/workflow wiring, plus DiscoverInstanceTypeAtLeastMemory, which had no other caller. GuestExecTimeout stays: GuestExec now delegates to it, and the old two-minute hard cap it replaced was a latent trap for any long guest command. * test(e2e): add partial-block concurrent-write durability suite Replaces the removed memdurability suite, which passed on a build that still carried the bug it claimed to test. The engine reaches its read-modify-write path only for a partial block; a fully covered block takes a full-overwrite branch that reads nothing and can lose nothing. The old workload wrote through ext4 with 1 MiB buffers, which the filesystem coalesced into aligned full-block requests: block-layer tracing recorded zero unaligned and zero sub-4096 requests, so the path under test never ran, and writers 4 MiB apart could not collide on a block even in principle. This suite writes the shape the defect needs. Two writers issue concurrent O_DIRECT writes into disjoint halves of the same 4096-byte blocks on a raw, unformatted device, stamping every half with the round number, then drop the page cache and reread with O_DIRECT asserting every half carries the final round. One half reading back at an earlier round is the signature of the lost update. The old suite also could not fail even had it reached the path: its write phase ended in 'wait; sync; sha256sum' and reported sha256sum's exit status, while bare wait returns 0 unconditionally, so writer errors were invisible and a backend ENOSPC presented as a pass. Here each writer's exit status and exact byte count are asserted before any durability claim is made. Working set is 8 MiB rather than 2048 MiB, and the volume is deleted on teardown; the predecessor left roughly 3 GiB of backend per run and twice drove a node under the nearfull watermark. Dispatchable but not in the default suite list until a green run and a demonstrated fail-first against a pre-fix engine exist. * test(e2e): let the fixture own the working-set volume delete The suite deleted the volume in its own cleanup and the fixture deleted it again on close, so every run ended with an InvalidVolume.NotFound from the second attempt. Detach stays — DeleteVolume against a still attached volume is what leaks volumes on teardown — and the delete is left to the fixture so the volume is released exactly once. * test(e2e): gate merges on the partial-block durability suite Verified on one node with the same test binary and workload, varying only the engine: 1758 of 8192 halves reverted a generation against the pre-fix build, 0 of 8192 against the fixed one. That is the fail-first evidence the suite needed before it could be trusted to gate anything. Adding it to the default suite list rather than leaving it dispatchable is the point. Its predecessor sat outside every path that runs, which is how it survived long enough to be discovered green on a build that still lost data. * test(integration): cover the ECR data plane in the front gate The live ecr/ suite drove docker, crane and skopeo against a real registry, yet none of it boots a guest: it needs a registry, an object store and an HTTP client. The in-process gateway already serves the OCI Distribution v2 surface on an ephemeral port with a memory-backed object store, so these run here in 0.18s instead of behind full provisioning. Covers the three claims the live tests made beyond authorization, which is already down here: a push/pull round trip asserting blobs and manifests read back byte-identical, refusal to auto-create a repository on push, and retagging an existing manifest without disturbing the original tag. Content is compared rather than status codes alone. A registry that stores a blob under the wrong digest, truncates it, or serves a different one answers 200 to every request in the sequence. The capacity/load leg deliberately stays live: it exists to put real parallel pressure on a real predastore, and a memory-backed object store cannot make that claim. * fix(e2e): make volume teardown release the volume before deleting it Fixture cleanups drain LIFO, so a suite that creates its instance before its volume tears the volume down first, while it is still attached. DeleteVolume answered VolumeInUse, nothing retried, and the volume was stranded on the node. Reordering the chain cannot fix this — registration order has no way to express the instance/volume dependency. Instead teardown is now self-sufficient for any creation order: it force-detaches, waits for the volume to reach available, and only then deletes. Instance teardown waits for terminated for the same reason, since TerminateInstances returns as soon as the request is accepted. Two things kept the leak invisible. A failing cleanup was logged and forgotten, so a run stayed green with resources left behind; failures are now reported as leaks, failing the bound test or surfacing through Close() for TestMain to fail the run. And a panic in one cleanup aborted the whole chain, stranding every resource behind it; each callback is now isolated. RegisterVolumeTeardown and the fixture had grown separate teardown paths, only one of which detached. Both now share it.	2026-07-22 17:02:20 +10:00
Josh Siviour	1e1d2f3c6d	ci: GPU e2e workflow on ci-gpu self-hosted runner (#518) ... * ci: GPU e2e workflow on ci-gpu self-hosted runner Runs tests/e2e/gpu (EC2/ECS/EKS GPU passthrough) against the persistent, hand-bootstrapped wattle shared host, driven over SSH by a banksia runner labelled ci-gpu (matches the ci-single/ci-multi convention) — no runner installed on the shared box. - runs-on [self-hosted, ci-gpu]; concurrency ci-gpu, cancel-in-progress false (single A1000 = single-flight, queue not stomp) - workflow_dispatch + GPU-path filter (not every push) - manual-work mutex gate (~/.ci-gpu-paused / CI_GPU_PAUSED) so hands-on GPU testing blocks CI - if: always() cleanup terminates launched GPU instances; never resets the box (no setup-ovn.sh/dev-reset/cluster-reset) - drives the control plane with spx + the already-configured aws spinifex profile directly (no wrapper scripts, nothing to install on wattle) * ci(gpu-e2e): advisory AMI preflight, fail only if zero GPU AMIs The suite is self-guarding — each test skips when its AMI is absent. The hard-fail on the base ubuntu GPU AMI blocked the whole run even when the ECS GPU AMI (the only one imported) could execute. Inventory the AMIs and fail only when none are present. * ci(gpu-e2e): self-provision base GPU AMI, hard-require it in preflight The GPU E2E workflow was green-because-skipped: with no GPU AMIs imported the self-guarding suite skipped every test, passing as a false green. Make the raw-EC2 GPU passthrough test the always-on baseline. - Add an import-if-absent setup step that pulls the prebuilt base GPU image from the catalog by name (ubuntu-26.04-nvidia-gpu-x86_64), naming the AMI exactly what tests/e2e/gpu filters for. Idempotent; caches on wattle's persistent loop-fs. Runs spx under sg spinifex (local storage write). - Preflight now hard-requires the base AMI (fail, not skip) so a silent import failure can't pass as green; ECS/EKS node AMIs stay opt-in warn. - Reconcile the local build path: ubuntu-gpu-nvidia.conf AMI_NAME and launch-gpu.sh's nvidia default now use the same canonical name, so a locally built+imported image also satisfies the suite. * ci(gpu-e2e): pass --ami-name on base GPU import so the AMI name matches spx admin images import --name selects the catalog entry but names the resulting AMI generically (ami-<distro>-<version>-<arch>), so the import landed as ami-ubuntu-26.04-x86_64 and the tests/e2e/gpu name filter never matched. Pass --ami-name ubuntu-26.04-nvidia-gpu-x86_64 explicitly (same flag build-system-image.sh uses) and poll briefly for availability. * fix(network,vm): reconcile auto-assigned public-IP NAT + scale VFIO QMP timeout Auto-assigned public IPs were never carried through the network reconciler. applyEIPs ran AddEIP + ensureGuestPortDatapath for user EIPs only; auto-assigned IPs (intent.Ports[].PublicIP) got egress exemption but no NAT re-assert and no gatewayLRP->guest convergence. Their dnat_and_snat was created once at RunInstances and never touched, so a vpcd/OVN rebuild dropped it and the guest-port hop never converged: inbound DNATs at the gateway but never reaches the guest (TCP/SSH dark) while ICMP is answered by the gateway LR (ping OK). floatingIPSpecs now folds every auto-assigned/ELB public IP into the same AddEIP + guest-port convergence path as user EIPs (deduped by private IP; a user EIP wins), making the datapath self-healing across reconcile ticks and deploys. qmpGreetingTimeout for VFIO guests now scales with guest RAM (base 30s + 8s/GiB, floored at 180s, capped at 600s) instead of a flat 180s, so a large guest is not SIGKILLed mid-pin while the whole guest RAM is IOMMU-locked before QMP answers. * fix(vm): scale QMP handshake command deadline for VFIO launches The greeting timeout scaling alone did not fix the VFIO launch SIGKILL: a GPU guest sends its QMP greeting before the RAM pin completes, then cannot service qmp_capabilities until the pin finishes. sendQMPCommand hardcoded a 30s response deadline, so the handshake decode timed out (~43s for a 16 GiB g5.xlarge) and the launch cleanup SIGKILLed a QEMU that would have come up. Parameterize the command deadline (sendQMPCommandWithTimeout); the handshake now uses the RAM-scaled qmpGreetingTimeout (base 30s + 8s/GiB, floor 180s, cap 600s) for qmp_capabilities. Other callers keep the 30s default. * test(gpu-e2e): share one GPU instance across passthrough subtests to avoid mid-suite IP recycle	2026-07-13 21:28:48 +10:00
Josh Siviour	98fc01764b	feat(ecs): GPU passthrough to task containers (Epic C) (#512) ... * feat(ecs): thread resourceRequirements GPU count through conv, ContainerDef, AssignContainer and RunSpec * feat(ecs): add GPU placement dimension — InstanceRecord capacity, fits/reserve/release, STRINGSET resource reporting * feat(ecs): agent GPU discovery via nvidia-smi, pinning ledger, device-UUID report-back and DescribeTasks gpuIds * feat(ecs): inject assigned GPU devices into containerd OCI spec via CDI (oci.WithCDIDevices) * test(ecs): add GPU task e2e (nvidia-smi container, gpuIds assertion) to gpu e2e suite * test(gpu): decouple base-AMI requirement from GPU fixture so ECS e2e runs without the ubuntu EC2 image * test(gpu): pick smallest advertised GPU instance type to fit a single host * fix(ecs): preserve pinned GPU UUIDs across STOPPED state change so DescribeTasks reports gpuIds for one-shot tasks	2026-07-13 10:54:55 +10:00
Josh Siviour	9f349e86ca	feat(eks): expose NVIDIA GPUs to pods (Epic B) — VFIO QMP, worker registration, device-plugin GPU access (#507) ... * feat(eks): expose NVIDIA GPUs to pods via CDI device plugin GPU nodegroups now label workers nvidia.com/gpu.present=true and taint them nvidia.com/gpu=present:NoSchedule (via a k3s config.yaml.d drop-in, since k3s has no K3S_NODE_TAINT env), and stage a hidden nvidia-device-plugin addon that addon-sync renders into the K3s auto-deploy dir. The device plugin runs with --device-list-strategy=cdi-cri and is gated to GPU nodes by nodeSelector + toleration, advertising nvidia.com/gpu allocatable so pods land on GPU nodes and get the device injected via the CDI spec baked by mulga-cdi-generate. Relies on containerd 2.0.5 default enable_cdi=true (no config fork). * fix(vm): scale QMP greeting deadline for VFIO passthrough guests A GPU passthrough guest (-device vfio-pci + large -m) must lock and DMA-map its entire guest RAM through the IOMMU before QEMU's QMP monitor answers, which exceeds the fixed 30s greeting deadline and gets the VM SIGKILLed at launch. Parameterize the greeting timeout (NewQMPClientWithGreetingTimeout) and scale it to 180s for VMs with GPU attachments; plain VMs keep the 30s default and reconnects against an already-running QEMU keep it too. * fix(eks): register GPU workers reliably and expose GPUs to pods Three fixes let a GPU nodegroup worker boot, register, and advertise its GPU: - k3s-agent.service gains Delegate=yes (plus KillMode/TasksMax/limits and overlay/br_netfilter modprobe): k3s embeds containerd+kubelet in-process, so on cgroup-v2 the kubelet cannot create /kubepods without a delegated subtree and ContainerManager.Start fails before Node registration. - The GPU node label rides a k3s config drop-in (20-gpu.yaml node-label + node-taint) instead of K3S_NODE_LABEL, which k3s ignores; without the label the nvidia-device-plugin nodeSelector never matches. - Raise the nodegroup ready timeout to 20m for the ~7min GPU first boot. Adds the GPU e2e (VPC + NAT-GW egress harness) and a slog-restore unit test. * fix(eks): install ecr-credential-provider on the GPU node AMI The GPU worker's kubelet is started (from nodegroup userdata) with --image-credential-provider-config + --image-credential-provider-bin-dir= /usr/local/bin, but the eks-node-gpu AMI never built or installed the ecr-credential-provider binary. kubelet treats a referenced-but-missing provider binary as a fatal RegisterCredentialProviderPlugins error, so the node crash-loops and never registers (while the Alpine eks-node worker, which ships the binary, joins fine). Build + install it in the GPU manifest; the server-only binaries stay omitted since GPU nodes are agent-only. Also tee k3s-agent stderr (and its embedded kubelet klog) to the serial console: Ubuntu logs only to journald, which is off-box-invisible on a worker in an isolated customer VPC, so a kubelet that fails to register left no trace. * fix(eks): give the nvidia-device-plugin its own GPU access The CDI-mode device plugin (--device-list-strategy=cdi-cri) must run nvml.Init and generate the CDI spec in its own container, but the DS had no GPU wiring, so nvml.Init crash-looped and nvidia.com/gpu was never advertised. Run the DS under the k3s-auto-configured nvidia runtimeClass with NVIDIA_VISIBLE_DEVICES/CAPABILITIES=all, the host root mounted read-only at /driver-root so it can locate the driver libs + ld.so.cache, and /var/run/cdi mounted writable so the generated spec is visible to containerd. No enable_cdi drop-in is needed on k3s v1.32.5 / containerd 2.0.5. GPU workload pods still need only resources.limits nvidia.com/gpu. Live-validated end-to-end on the single-GPU host (RTX A1000): baked control-plane AMI, GPU nodegroup, nvidia.com/gpu allocatable, nvidia-smi pod, zero manual intervention. * test(ec2): drop obsolete restoreSlogDefault test Rebased onto dev, which dropped the restoreSlogDefault workaround in #506 (viperblock no longer mutates the global slog). The test referenced the now-deleted helper and no longer compiles. Real GPU/registration diff is independently covered (diff coverage 95.3%).	2026-07-12 10:38:36 +10:00
tomnewton-mulga	412eb618b0	Adding GPU passthrough e2e tests - intended to be run on Wattle	2026-06-05 13:47:11 +10:00