mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-20 19:25:52 +00:00
6b984eee33ddd6fd811de30ff130d19fbe6435cf
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Josh Siviour
|
7bbd99c792 |
feat(eks): multinode control-plane + IMDS/token-webhook CP fixes (426/427/428/495/496) (#459)
* feat(eks): multinode control-plane networking, IAM, and CoreDNS parity
Integrates the EKS multinode fix set for the managed-control-plane topology
so a 3-worker cluster brings up ingress/ALB and cross-node DNS the way AWS
EKS does. Squashed from feat/eks-workload-lifecycle, rebased onto dev; the
node-IAM piece (4f6ea8cf) is dropped as dev's lazy IAMProvider supersedes it.
EKS:
- Route apiserver egress (exec/logs/webhooks) through konnectivity
(apiserver-network-proxy): CP servers run konnectivity-server behind the
cluster NLB (:8132), workers run konnectivity-agent, so apiserver->pod
traffic rides the agent-initiated reverse tunnel instead of an unroutable
CP->VPC path. Server-count fan-out gives every apiserver a tunnel to every
replica (HA-correct).
- Pin k3s node-ip to the CP-VPC primary on overlay re-home; CP-overlay
flannel mesh SG rule authorized at cluster launch with ordered teardown.
- Pin VPC data NIC MTU to 1320 so flannel fits the OVN underlay.
- Pin the CoreDNS DaemonSet to workers (drop CriticalAddonsOnly + CP/master
tolerations, add anti-control-plane nodeAffinity) for AWS-EKS parity.
- Spread nodegroup workers across hosts; addon readiness falls back on
workload rollout when gvks are absent.
- elbv2: allow the proxy_protocol_v2.enabled target-group attribute.
EBS:
- Move volume attachment state to state.json so a live nbdkit VB cannot
clobber it; route mounted-volume state updates through the live VB with a
retry for in-use marks racing the mount responder; keep the boot volume
in-use across stop/crash unmount.
* fix(eks): gate orchestration on the resolved IAM ensurer, not raw deps.IAM
missingOrchestrationDeps gated on s.deps.IAM, but production wires only the
lazy deps.IAMProvider and leaves deps.IAM nil (set directly by tests only).
The gate therefore reported missing=[IAM] on every node forever, so
CreateCluster/CreateNodegroup were rejected with ServiceUnavailable even
though the IAM service was fully up via the provider.
Gate on s.iamEnsurer() instead — the same resolver (deps.IAM, else
deps.IAMProvider()) the nodegroup/role code already uses — so the protective
check still rejects a node with no IAM service but passes when the provider
supplies one. Add a regression test that sets only IAMProvider and asserts the
gate is satisfied; the existing nil-both test still rejects.
* fix(eks): let eks-token-webhook use IMDS creds when static keys absent
The CP VM launches on an instance profile, so buildK3sUserData omits
EKS_ACCESS_KEY/EKS_SECRET_KEY. loadConfig() rejected absent static keys
before eksgw.New could fall back to the IMDS SDK chain, so the webhook
aborted on boot, never wrote token-webhook.kubeconfig, and the apiserver
crashed on the missing --authentication-token-webhook-config-file file,
stalling the cluster at CREATING until it timed out to FAILED.
Drop the static-key precondition (matching the sibling eks-gateway-publish
and eks-gateway-fetch helpers); keep the genuinely-required gateway/account/
cluster gates.
* fix(eks): stop dhcpcd IPv4LL hijacking IMDS on multi-NIC control plane
The K3s control-plane system VM is dual-NIC (data ENI + mgmt NIC on br-mgmt,
which has no DHCP server). dhcpcd's no-lease IPv4LL fallback assigned a
169.254.x.x address and a 169.254.0.0/16 route on the mgmt NIC, capturing
169.254.169.254 and steering IMDS off the data NIC away from the per-tap
br-imds datapath, where the host RST it. eks-gateway-publish then failed to
sign requests and no bootstrap artifacts were ever published, so clusters sat
CREATING until they timed out to FAILED.
Bake noipv4ll into /etc/dhcpcd.conf so dhcpcd never assigns an IPv4LL address
or /16 route on a NIC that fails DHCP; real DHCP leases (workers, data ENI)
are unaffected and IMDS falls through the data NIC's default route to the
br-imds demux, matching the single-NIC path. Defense in depth: mulga-mgmt-net
deletes any default route on a NIC declared NIC<n>_DEFAULT=0.
* fix(eks): grant eks:WebhookTokenReview to the control-plane instance role
The eks-token-webhook relays `aws eks get-token` bearer tokens to the gateway
broker at POST /clusters/{name}/token-review, signing with the control-plane
VM's IMDS instance-role creds (spinifex-eks-server). That route authorizes
against eks:WebhookTokenReview, but the role's inline policy granted only
eks:PublishInternal and eks:ListInternalAddons, so the gateway 403'd every
relay and the apiserver returned 401 to all external kubectl.
Add eks:WebhookTokenReview to eksServerInlinePolicy. EnsureSystemInstanceProfile
re-asserts the inline policy on every control-plane instance-profile ensure, and
the gateway evaluates authorization per request, so existing clusters converge
without a rebuild once the shared role is updated.
|
||
|
Josh Siviour
|
b23fa3bf60 |
feat(eks): managed control-plane VPC (Set B) + control-plane lifecycle hardening (#356)
* feat(eks): VM-side managed-addon delivery transport
Stage CreateAddon manifests in KV host-side; the control-plane VM pulls the
staged set through the AWS gateway (signed GET /clusters/{name}/internal-addons/
{accountId}), renders the baked bundles into the K3s auto-deploy dir, and
reports per-addon delivery status on a dedicated eks.addon.*.status channel that
the cluster reconciler CASes onto AWS-visible AddonStatus (CREATING->ACTIVE).
- gateway: ListInternalAddons route + ListStagedAddonManifests NATS action
- handlers: addon status reconciler (nextAddonStatus), staging installer
- eks-node AMI: eks-gateway-fetch binary + mulga-eks-addon-sync agent
- agent renders idempotently (cmp before replace) so K3s auto-deploy does not
re-apply every tick and clear the Addon CR .status.gvks readiness signal
- agent mirrors per-tick delivery outcomes to the serial console for host-side
observability
* fix(eks): provision cluster NLB synchronously so the endpoint carries the real front-end IP
The cluster NLB front-end IP is assigned by the async LB-VM launch
(launchLBVMAsync), but EnsureClusterNLB read it back synchronously right after
CreateLoadBalancer returned — losing the race and falling back to the synthetic
<lb>.elb.spinifex.local DNS name. That name is unresolvable (no Route53) and is
not in the apiserver serving-cert SAN, so kubectl against the cluster never
connects.
Split the elbv2 create: the public CreateLoadBalancer stays async (267.4 — an
inline multi-minute VM boot head-of-line-blocks the gateway responder), and a
new CreateLoadBalancerSync drives the data-plane launch inline and returns the
LB carrying its front-end address. The EKS cluster-create worker runs off the
gateway responder, so it uses the sync entry and reads the IP from the return
value instead of racing persisted state. No polling.
- elbv2: factor provisionLBDataPlane out of launchLBVMAsync; add CreateLoadBalancerSync
- eks: ensureClusterLB uses the sync entry, sets FrontendIP from the result,
drops the read-back; EnsureClusterNLB fails loud (ErrClusterNLBFrontendIPUnavailable)
when no front-end IP is allocated rather than shipping the DNS-name fallback
- eks: drop the DNS-name endpoint fallback; the endpoint is always the front-end IP
* feat: auto-wire IGW for internet-facing EKS cluster endpoint
An internet-facing cluster NLB allocates an external front-end IP and the
OVN dnat_and_snat for it, but the external switch + localnet + gateway LRP
that make that IP answerable on the wire are built only on IGW attach. The
control-plane NLB is a system instance, so ensure an IGW on cluster build
and reclaim it on teardown.
EnsureClusterIGW (idempotent, reuses a customer IGW untouched) runs before
EnsureClusterNLB when the endpoint is public; DeleteClusterIGW (ownership-
scoped) removes only the cluster-owned IGW in purgeClusterInfra, before the
VPC delete. New IGW dep wired from the daemon.
* fix(eks): tear down infra on failed cluster launch to stop LB EIP leak
A CreateCluster that fails during its background launch flipped the meta
to FAILED but performed no teardown, relying on a later same-name create
to reclaim and purge the infra. EKS cluster names are unique per create,
so that reclaim never fires: the internet-facing load-balancer VM keeps
running with its allocated+associated dnat_and_snat EIP indefinitely.
Over repeated create/delete cycles the EIP pool fills with allocations
bound to terminated instances, so a later allocation's advertised
endpoint and its live OVN NAT diverge onto different pool addresses.
- failClusterLaunch now runs a best-effort purgeClusterInfra on the
in-memory meta (freshest refs even when the failing step was the meta
write itself) before MarkClusterFailed. purgeClusterInfra is
idempotent, so a later reclaim or DeleteCluster re-purge is a no-op;
the FAILED meta is retained for observability.
- Daemon releaseSystemInstanceEIP extracted and called from both
TerminateSystemInstance and cleanupFailedSystemInstance, so a launch
that fails after AssociateAddress releases the eipService allocation
instead of leaking it (MarkFailed's ReleasePublicIP only knows the
externalIPAM path).
* feat: EKS managed control-plane VPC (AWS Set B) composed from EC2 APIs
CreateCluster now auto-builds the managed control-plane VPC under the
system account, the spinifex analogue of AWS EKS's hidden managed-account
VPC: a public subnet for the internet-facing NLB, private subnet(s) for the
k3s control-plane VM(s), and a NAT gateway giving the private CP egress for
image pulls. It is composed from the real EC2 VPC-family APIs
(CreateVpc/Subnet, IGW, RouteTable/Route, NatGateway), so per-subnet egress
gating is wired by the existing topology subscribers off the route-table
events those APIs publish — no direct OVN mutation.
This resolves the mulga-siv-292 root cause: the internet-facing NLB and the
private CP were crammed into one customer subnet with no IGW route, so both
were treated as private and dropped by the lr_in_policy 1100 rule, killing
the LB-VM return leg and lb-agent heartbeat. The CP only survived via a
per-instance 1200 reroute bandaid, now removed — the topology expresses
egress instead.
Placement is uniform single/multi-node (CP always in the private subnet).
The system LB VM heartbeats over the mgmt bridge (SystemGatewayURL) rather
than the WAN. Managed-VPC teardown reclaims NAT GW + EIP, route tables,
subnets, IGW, and the VPC in dependency order. Customer subnetIds (Set A /
worker side) remain consumed-not-created and are deferred to the worker
round.
* fix(eks): bake cluster-owner account into CP-VM EKS_ACCOUNT_ID
The managed control-plane VPC (Set B) launches the K3s control-plane VMs and
their ENIs under the system (infra) account, but the on-VM agents — bootstrap
publish, state report, token-review, and add-on fetch — must key on the
cluster-OWNER (customer) account that owns the cluster meta, namespaces, and
AccessEntry KV. Add ClusterAccountID to K3sServerInput and bake it into the
VM's EKS_ACCOUNT_ID, decoupling it from the infra AccountID the VM launches
under. Without this the VM reported state and fetched add-ons against the
system account, so the cluster never observed a healthy control plane (stuck
CREATING, null CA) and kubectl/add-on delivery timed out.
Also refresh the e2e suite doc comment to describe the Set B topology and the
data-plane subtests (kubectl + managed-addon delivery) that now run.
* fix(eks): explicitly delete addon objects on unstage
K3s does not delete the applied resources when an auto-deploy manifest file is
removed from the server manifests dir (documented behaviour). The addon-sync
GC pass relied on that, so after DeleteAddon the rendered manifest was dropped
but its Namespace/ConfigMap stayed standing — the e2e AddonDelivery GC wait
timed out. Copy the manifest aside, drop the original so K3s stops tracking it,
then kubectl delete the objects (--wait=false to avoid finalizer stalls).
|
||
|
Josh Siviour
|
74b91b5cc5 |
feat(eks): HA control plane — 3-node etcd quorum spread across distinct hosts (#335)
* feat(eks): node-targetable control-plane VM (HA spread transport prereq)
Groundwork for HA control-plane placement (mulga-siv-231.7.1): make the k3s
control-plane VM placeable on a specific Spinifex host.
- Add a sys.medium instance type (2 vCPU / 4 GB) and boot the control-plane VM
as it instead of t3.medium. A sys.* type keeps the CP VM out of customer
DescribeInstanceTypes and makes the daemon register the node-targeted
system.LaunchInstance.{type}.{nodeID} subject (only sys.* types get it).
- Add K3sServerInput.TargetNodeID and a LaunchSystemInstanceOnNode method on
the launcher: empty/local node launches in-process (unchanged single-CP
path); any other node dispatches over the node-targeted subject, where the
receiving daemon runs the launch and owns the VM.
The spread orchestrator (reserve N hosts, launch per host, verify, rollback,
<3-host fallback) lands separately; CreateCluster still launches locally
(TargetNodeID empty), so behaviour is unchanged.
* feat(eks): HA control-plane spread orchestrator
Place N=3 k3s server VMs across distinct Spinifex hosts via a per-cluster
spread placement group, with all-or-nothing rollback and single-CP fallback.
- placeControlPlane: capacity fan-out (HostScheduler) -> >=3-host gate ->
ensure spread group (system account) -> ReserveSpreadNodes(Min=Max=3) ->
parallel per-node LaunchK3sServerVM(TargetNodeID) -> node-vms placement
verify -> FinalizeSpreadInstances. Any launch/verify/finalize failure
terminates launched VMs, releases the reservation, drops the group.
- <3 schedulable hosts or a lost reservation race falls back to a single
local control-plane VM (prior behaviour).
- ClusterMeta gains ControlPlaneNodes[] + ControlPlaneSpreadGroup; [0] is
mirrored into the scalar ControlPlane* fields for back-compat. DeleteCluster
tears down every CP VM and the spread group.
- Wire PlacementGroup + Scheduler into EKSServiceDeps + orchestration-deps gate.
* fix(eks): size HA control-plane spread on raw host headroom
SchedulableHosts matched the CP type by name in node.status's per-type
capacity list, but that list omits sys.* types (system types are hidden
from customers). The CP VM is sys.medium, so the match never hit and
SchedulableHosts returned 0 on every node — placeControlPlane always fell
back to a single CP, making the >=3-host spread unreachable in production.
System VMs consume host vCPU/memory like any guest, so size the fit against
each node's raw schedulable headroom (Total - Reserved - Alloc) and the
type's footprint instead. Adds instancetypes.SpecForSystemType for the
sys.* vCPU/memory spec and a pure nodeFitsSystemInstance helper.
* feat(eks): k3s server-join role for HA control-plane quorum
Servers 2..N now boot in join mode: server: https://<first-server>:6443 +
a shared cluster token, without cluster-init, so they join the first server's
embedded-etcd quorum instead of each cluster-initing an independent datastore.
- K3sServerInput gains JoinToken (shared cluster secret, set on every server)
and ServerURL (set => join server, no cluster-init, server-join role).
- buildK3sUserData branches cluster-init vs server:, emits token:, and selects
SPINIFEX_K3S_ROLE server vs server-join.
- launchControlPlaneSpread launches nodes[0] first (cluster-init), derives the
join URL from its ENI IP, then launches the rest in parallel as join servers;
a first-server failure skips the joins and rolls back.
- CreateCluster mints a per-cluster crypto-random token (GenerateK3sClusterToken)
threaded into the placement template.
- eks-node-role.sh adds a server-join case: token-webhook + k3s + state-report,
but not k3s-first-boot (the first server already publishes the bootstrap
artifacts; a join re-publish only races the bootstrap bus).
* fix: open etcd-peer/kubelet ingress on EKS control-plane SG for HA join
Join servers (231.7.2) register over the supervisor port 6443 but their
embedded etcd could not peer with the quorum: the control-plane SG only
admitted 6443 from the VPC CIDR, omitting etcd client+peer 2379-2380 and
kubelet 10250 between control-plane nodes. A single cluster-init server never
exercises those ports, so the gap stayed hidden until multi-server HA — the
join registered but its etcd never replicated the raft log, leaving the node
perpetually NotReady.
Add EnsureControlPlaneHAIngress with self-referencing (cpSG->cpSG) rules for
etcd 2379-2380 and kubelet 10250, called from CreateCluster after
EnsureControlPlaneIngress. Verified live on a 3-node cluster: join servers
reach Ready and form a 3-member etcd quorum that survives loss of the original
first server.
* feat: register all control-plane ENI IPs as EKS cluster NLB targets
Register every HA control-plane server ENI IP in the cluster NLB target
group, not just the primary. The TG already health-checks :6443, so a
dead member drains and kubectl/apiserver traffic fails over to surviving
etcd-quorum members. Add RegisterClusterTargets batch helper; the single
RegisterClusterTarget now delegates to it.
|
||
|
Josh Siviour
|
a22bc2f716 |
feat(eks): 6d nodegroup provisioning + NATS-gated cluster health (#300)
* feat(eks): nodegroup provisioning + K3s agent join (6d)
CreateNodegroup launches N customer-owned worker EC2 from the unified
eks-node AMI in agent role; each joins the cluster via K3S_URL + K3S_TOKEN
baked into cloud-init (first-boot.env SPINIFEX_K3S_ROLE=agent + agent.env).
Workers are customer-owned and DescribeInstances-visible (no ManagedBy,
no mgmt NIC) via the normal RunInstances path, matching real EKS.
K3S_URL targets the control-plane ENI's in-VPC private IP on :6443 — the
cluster NLB DNS endpoint is not resolvable in-VPC yet; switch to the NLB
endpoint on :443 once authoritative in-VPC DNS lands. K3S_TOKEN is the
decrypted cluster node-token persisted at server bootstrap.
Describe/List/Update(scaling)/Delete round out CRUD. Cluster<->nodegroup
SG ingress rules (apiserver 6443, flannel VXLAN 8472/udp, kubelet 10250,
intra-nodegroup) authorized idempotently. UpdateNodegroupVersion deferred.
* feat: gate EKS cluster health via NATS state reports
The K3s apiserver binds the VPC node-ip, unreachable from the host-side
spinifex daemon, so the reconciler cannot probe /healthz directly. Add a
control-plane state reporter that publishes {healthz, node_count} over the
management NATS bus the daemon already shares.
- eks-node server role runs mulga-eks-state-report as an OpenRC service,
publishing eks.state.{account}.{cluster}.server every 30s.
- ClusterReconciler subscribes to that subject, gates CREATING -> ACTIVE on
a healthy report, and records Ready node_count into ClusterMeta.
- node_count counts Ready nodes only; k3s retains terminated workers as
NotReady until pruned, so a raw count never drops on scale-down.
|
||
|
Josh Siviour
|
f14fb64562 |
feat(eks): unify eks-server + eks-agent into one eks-node AMI (#288)
* feat(eks): unify eks-server + eks-agent into one eks-node AMI Collapse the two K3s AMIs into a single spinifex-eks-node image whose role (server vs agent) is chosen per-instance at first boot, halving build time, storage, and CVE-rotation surface. - scripts/images/eks-node/: superset manifest + merged setup.sh; all role services baked but only crond + the new eks-node-role selector enabled. - eks-node-role first-boot selector reads SPINIFEX_K3S_ROLE, rc-update adds + starts the matching services (server: k3s + eks-token-webhook + k3s-first-boot publisher; agent: k3s-agent), records /etc/spinifex-eks/role, self-disables. Paths are env-overridable; eks-node-role_test.sh covers all five cases. - mulga-eks-etcd-snapshot.sh early-exits on agent nodes. - k3s_server_vm.go seeds SPINIFEX_K3S_ROLE=server into first-boot.env. - Makefile/dev-install: build-eks-node-image / import-eks-node-image replace the server+agent targets. - Delete scripts/images/eks-server + eks-agent. The launcher resolves the AMI by the spinifex:managed-by=eks tag, so running clusters (which hold the resolved AMI ID) are unaffected. AMI bake + cluster boot are operational integration steps, not yet run. * fix(eks): order eks-node-role after cloud-config/cloud-final The first-boot role selector reads /etc/spinifex-eks/first-boot.env, which cloud-init delivers via write_files in the cloud-config/cloud-final stages. The selector only depended on net+cgroups, so on a fast boot it could start before write_files landed and read a missing role env. Add an after-ordering on cloud-config + cloud-final so the env file is always present first. |