mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-15 17:11:30 +00:00
5ff54ea110346ebaf6fcdd1d4dad312a4e1df5ca
109 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Julian Sommer
|
ba98509c5b | fix: simplify mulga-docs build step by collapsing coverage paths + hardware | ||
|
Julian Sommer
|
fb6494da01 | feat: coverage docs | ||
|
Josh Siviour
|
8e11908dfb |
fix: make the EKS control plane's disk latency observable, and give it room to run (#1009)
* fix: report CPU and memory pressure in the EKS control-plane health diagnostic An unhealthy control plane reported readyz, etcd reachability and etcd-disk free space. When etcd goes unreachable with disk:ok and no OOM kill, that set cannot distinguish a starved guest from a genuine etcd fault, so add the loadavg and MemAvailable that separate them. An empty /readyz body also rendered as readyz:[none], which reads as "no subcheck failed" when it means the probe never answered. Report that as unreachable instead. * fix: sample the node's load, not just the runner host's Every runner agent runs on one host while their nodes sit on several, so the existing sample measured the runner's host and was labelled as the hypervisor. It happens to coincide when the node is on that same host and misleads otherwise. Relabel it and add a node-side sample, which is where the guests are actually scheduled and so where a starved guest shows up. * feat: build the mkosi EKS image in CI and give its control plane telemetry The Ubuntu/systemd EKS image is what customers run, and nothing built it: the composition existed in mkosi-build.sh's image_profiles table but had no caller, so a change that broke it was found by hand or not at all. Cell-25 builds the Alpine image, which leaves the published one with no gate. Add a Makefile target beside the Alpine one and a job in the existing path-filtered image workflow. The guest also collected nothing. k3s has served embedded-etcd metrics on 127.0.0.1:2381 since the daemon started setting etcd-expose-metrics, and no collector ever read them, so an etcd stall was only ever visible as "etcd:unreachable" in the state report — which cannot separate a slow disk from a dead one. Ship otelcol-contrib pinned to the version the cluster hosts already run, scraping etcd and guest host metrics. The unit is gated on ConditionPathExists for its endpoint file rather than started unconditionally: whether the control-plane guest can reach the sink from the isolated CP VPC is unverified, and a collector with nowhere to export is a restart loop, not telemetry. * fix: report etcd fsync latency in the control-plane health diagnostic disk:ok measures free space, which says nothing about how long a write takes. etcd stalls on fsync latency long before it runs out of room, and this guest's disk is an EBS volume served by viperblock, so a fsync is a network round trip. An unhealthy control plane reporting healthy memory and disk was uninterpretable without it. Derived from the histogram's sum and count rather than a bucket percentile: two greps against an interpolation this script has no business doing, and the difference between a healthy single-digit reading and a stalled one is an order of magnitude, not a tail. Rides the state report's existing gateway path, so it needs no route the CP VPC does not already grant, and lands on both images because the script is shared. The scrape's failure is guarded explicitly. Under set -e a bare assignment from a curl against a port nothing answers aborts the whole diagnosis, dropping the reason field exactly when it is wanted. * feat: publish etcd fsync on every control-plane report, not only failing ones A figure that appears only once the apiserver is already unhealthy has no baseline to be read against, which is the same gap a passing cell that uploads no journal leaves: the number is unanchored when it finally arrives. Move the scrape into its own helper, emit it on healthy reports too, and carry it as a typed field rather than only inside the reason string. Slowness is logged, never gated. observe() decides cluster health, and a working cluster on a slow disk is working — returning an issue there would fail customers' clusters on a latency threshold. The warning is latched on the transition instead, because the control plane republishes on its own timer and a line every interval is how a real signal gets tuned out. An absent sample is not a fast one. Too few fsyncs to average, an etcd serving no metrics and an older AMI all arrive as nil, and the field is omitted rather than defaulted so none of them can be read as healthy. The minimum sample count is the same lesson as the slow-shard floor: a mean over three fsyncs on a just-started etcd is a number with no meaning. * fix: log an etcd fsync baseline and name the two no-sample cases apart A healthy cluster logs no health lines, so the fsync figure reached the daemon on every report and was never surfaced — a passing cell left nothing for a later slow reading to be compared against. Log the first known sample. Split the "unknown" sentinel into nometrics (etcd served none) and warmup (too few fsyncs to average): different faults, different fixes. The payload guard now tests for a number rather than the sentinel word, so a future sentinel cannot leak into the JSON as a bare value. * feat: measure fdatasync latency in the diskperf gate The two pinned profiles are buffered-bypassing throughput jobs at queue depth 32. Neither measures the cost of making a write durable, which is what a consensus datastore pays per raft entry and stalls on long before it runs short of bandwidth. A 5ms barrier on bare metal went unseen as a result. syncwrite-4k is the etcd-shaped profile: sequential 4k, queue depth 1, fdatasync every write, buffered psync so the sync has a page cache to flush. fio reports the sync distribution apart from the write stream, so the parser reads it separately — gating on write clat would score the time to reach the cache and call it durability. No figures captured on this hardware yet, so the baseline entry is zero and the job records without gating. * fix: use the real otelcol checksums asset name in the EKS server image The checksums file is named for the release repo and the distribution and carries no version, unlike the tarball beside it. The guessed name 404'd and took the image build with it. * fix: extract otelcol as root in the EKS server image The upstream tarball records its build uid (runner/docker, 1001:118), which does not exist in the image. tar running as root tries to restore it and fails outright rather than degrading, taking the build with it. --------- Co-authored-by: Ben Duncan <5178243+benduncan@users.noreply.github.com> |
||
|
Bryn Mailer
|
18aa67b0e9 |
feat: add the e2e guest disk-performance gate (#964)
* feat: add the e2e guest disk-performance gate Nothing measured guest disk performance in CI, which is why a quadratic index scan shipped in viperblock 35dd9f2 and survived three subsequent fixes to adjacent code. It is also why the two availability clauses at the end of the ebs-performance plan's Stage 0 have never been evaluated: a sustained random-write workload took the guest, and then the host, down, and nothing since has demonstrated that it no longer does. tests/e2e/diskperf/ launches an instance, attaches a dedicated blank volume per repetition, and drives a pinned fio profile over guest SSH. Two profiles: randwrite-4k at 4 jobs x 4 GiB, the shape the exit criterion names, and randrw-70-30-4k, the mixed workload the headline IOPS came from. The target is a raw device with direct=1 rather than a file on the boot disk, so guest page cache, filesystem allocation and journal traffic are out of the path. Two classes of assertion, kept apart because folding them together lets a run that left the host unreachable pass on a respectable IOPS figure. Availability is hard pass/fail and absolute, so it gates from the first run: the job completes inside its budget, a guest responsiveness probe answers throughout on a second SSH channel, and the host's own sshd answers throughout. The guest probe reads the root volume while the workload runs on a different one, so a pass is evidence of isolation between volumes rather than of the job merely being slow. The host probe is a TCP connect plus an SSH banner read, which needs no credential and still proves the kernel scheduled sshd. Throughput and latency are banded against a committed baseline: fail above 25% regression, warn above 10%, per-metric median across repetitions. baseline.json is committed and embedded, with every figure zeroed, and a zero reference records and warns rather than failing. Only the availability class gates until numbers are captured on the bare-metal cell; a throughput band nobody measured would be a fabricated gate. A fresh volume per repetition is the reset. Extent count grows monotonically, so reusing a volume makes the gate order-dependent and drifts its own numbers upward over time, slowly normalising the regression it exists to catch. Each job is its own guest invocation and fio's JSON is fetched by a separate command, so a wedged job loses only itself and reports as a budget breach rather than a parse failure. e2e-baremetal.yml gains suites, suite-env and cell inputs so one reusable workflow serves both the correctness cell and nightly cell 28, which queues behind cell 20 on the shared concurrency group. Cells 25-27 are the dedicated eks, ecs and rds cells. The per-suite Go test timeout is resolved from e2e_suite_timeout in suite-sets.sh, where diskperf declares its 180-minute budget beside rds's rather than in a second place. The gate's own arithmetic runs in preflight via test-harness: band edges, the unmeasured cases, per-stream metric selection, fio JSON parsing, and the probe accounting including a slow-but-successful answer counting as a breach. A gate whose comparison logic is untested is the failure mode the plan is otherwise full of. The extent-count ceiling named as a fourth availability assertion is not implemented: it needs viperblock.index.entries from S1.5, which does not exist. * feat: let a manual bare-metal run choose its e2e suites A dispatch run only sees inputs declared under workflow_dispatch, which had none, so suites and suite-env resolved empty and fell back to the correctness set. Capturing a diskperf baseline by hand was therefore unreachable without a workflow_call caller. * fix: build the bare-metal suites the run step will execute The build step packs pre-built binaries into the tarball and did not see the suite selection, so a selected suite was absent from the node unless it happened to be one of the three the build script hardcoded. * feat: commit the measured disk-performance baseline Medians of three repetitions on the bare-metal cell. The throughput and latency bands now gate instead of warning, so a 2x regression in either job fails the suite. randwrite-4k's write tail is two orders above the mixed job's. It is recorded as measured rather than zeroed: an ungated metric would miss the regression class the gate exists to catch. |
||
|
Julian Sommer
|
c81abd1836 | fix: add fipsboot guard to missing services | ||
|
Julian Sommer
|
74117e5b26 | fix: remove the broken golangci-lint cache path | ||
|
Julian Sommer
|
e36c8f6ba8 | chore: update to go 1.27 | ||
|
Ben Duncan
|
225bf65a8e |
feat: EBS export tunables, teardown reapers, fan-out and OVN fixes (#800)
Merges `feat/ebs-export-tunables` (83 commits) into dev. The branch could not be rebase-merged because it carries five merges from dev, so it lands as a squash. ## What is in it - **EBS export tunables** and the nbdkit/viperblock export path they configure. - **Teardown reapers and backoff** for S3 buckets, load balancers, gateways, spot requests, certificates, endpoints, elastic IPs and network interfaces, so a dependent that keeps failing is backed off rather than retried hot. - **Retry and tolerance paths**: ECS IAM service init, ECR signing keys deleted between the list and the read, an unreadable signing key at awsgw startup, and an ECS instance-profile policy attach converging on a stale read. - **Key pair validation reads the material by name** instead of listing the account, closing the `InvalidKeyPair.NotFound` race that a single-replica LIST could produce. - **Concurrency and fan-out**: concurrent metadata document fetches, bounded metadata reads for describes, and the node-discovery timeout removed from every fan-out call. - **OVN correctness against the configured NB cluster**: the flows barrier, nexthop MAC binding, and stopping a compute node from running the package's standalone database. - **nats-js-watchdog can re-arm itself.** The escalation check ran above the probe loop while the only line that cleared the counter sat below it, so a latched watchdog could never observe a recovery. It now probes first and decides second, and says so once per latch rather than once per tick. - **CI**: 19 commits of nightly and build-pipeline work. ## Verification `make preflight` green locally. Build and Test, Integration Tests, Race Detection, and Lint and Security all green on `c2da0385`. ## Known red, not introduced here Two nightly cells fail on this branch and are pre-existing: - **cell-10** — a partial OVN IPsec enable leaves `NB_Global ipsec=true` asserted cluster-wide while two of three chassis failed their local reconcile, black-holing cross-chassis guest traffic for roughly 5.5 minutes while every health signal stays green. - **cell-19** — a total layer-3 egress blackhole below a correctly and promptly programmed NAT/EIP datapath, aggravated by a natuplink probe whose retry budget outlives the test's own wait, so it can never emit its FAIL verdict. Both are filed separately and should be weighed before a release is cut. |
||
|
Julian Sommer
|
333248568e | fix: use actions/cache@v6 + test-actions clean | ||
|
Julian Sommer
|
ae0337d31b |
test: run the unit and race tiers clean in CI
Go stores test results in the build cache alongside compiled objects, so now that the cache persists across runs an unchanged package replays its previous result instead of executing. That is what makes a local run fast and exactly what a merge gate should not do: a green check would no longer mean the suite ran against that commit. Add a GOTESTFLAGS hook, empty by default so local runs keep reusing results, and pass -count=1 from the two CI steps that gate a PR. Compilation is still cached either way, so this costs no build time. |
||
|
Julian Sommer
|
cba51b59e3 |
fix: stop GOFIPS140 splitting the Go build cache in two
GOFIPS140 is a global build-config change: it alters every package's action ID, stdlib included. A target that omits it therefore shares no build-cache entry with one that sets it, and the two flavours cost roughly a full cold build to switch between. Seven targets set it inline while eight go invocations did not, so test-integration, test-harness, test-actions, test-segscan-oracle, bench and the go run tools all built the non-FIPS flavour. In CI this is load-bearing: the integration job wins the shared setup-go cache-save race, stores a non-FIPS cache, and every FIPS build in the other jobs then misses on every lookup. Export it once so the two cannot drift apart again. |
||
|
Josh Siviour
|
c6bc2b4d29 |
fix: only restart NATS when JetStream has actually failed (#795)
The watchdog's is-active guard cannot fire against spinifex-nats.service (Type=simple reports active the instant the process forks, long before JetStream replays its state), so it restarted a NATS that was still recovering. Separately, any non-zero exit from spx js-probe was read as a JetStream write failure, so a broken spx binary read as a cluster-wide outage instead of an unrunnable tool. Replaces the is-active guard with an age gate on ExecMainStartTimestampMonotonic, adds a post-restart cooldown and a restart-count escalation that gives up rather than looping, and teaches the watchdog to treat js-probe exit 2 (and any exit code that isn't 0 or 1) as inconclusive rather than as proof of failure. Bounds the unit's own start with TimeoutStartSec=120, matching the existing TimeoutStopSec derivation. |
||
|
Josh Siviour
|
9102588e5a | chore: bump Go toolchain to 1.26.6 (#793) | ||
|
Julian Sommer
|
65d2501e6b | feat: add MariaDB as the second RDS engine (#762) | ||
|
Josh Siviour
|
fd8be8a814 |
refactor(test): route duplicated NATS bootstraps through testutil (#776)
* refactor(test): route duplicated NATS bootstraps through testutil Thirteen test sites hand-rolled a NATS or JetStream server bootstrap that spinifex/testutil already provides, and one seedKV clone duplicated testutil.SeedKV. Route them through the shared helpers. Sites whose options genuinely diverge are left alone: fixed ports needed for reconnect and restart scenarios, custom TLS and token auth, a custom MaxPayload, and TestMain entry points that have no testing.TB for t.Cleanup. The natgw and routetable seedKV clones use CreateOrUpdateKeyValue rather than CreateKeyValue, so their failure behaviour differs and they stay as they are. Also moves eight test files to external test packages where they declare no helper used by a sibling in the same package. Coverage is unaffected: Go compiles internal and external test packages into one binary per package, so attribution is identical either way. * chore(test): require new test files to use an external test package Adds a preflight check that fails when a newly added test file declares an in-package test. External test packages bind tests to the exported API and let packages share test doubles, which an in-package double cannot be. Only added files are checked, so the existing in-package tests are untouched. e2e and integration suites are exempt: both share a package-level fixture built in main_test.go, so their files cannot move individually. A file that needs unexported access can opt out with a //test:in-package comment. |
||
|
joshsiv-mulga
|
1e865b3a4b |
fix(ci): stop a cached integration run from failing the build
make test-integration cats the AWS model conformance report immediately after the test run, but the report is written by the test binary itself. Go's test cache means an unchanged package reports "ok (cached)" without executing, so no report is written and the cat fails the target with exit 1. Any branch whose changes do not invalidate that package's cache hits it, which is why it fires on unrelated branches -- a docs-only branch cannot break a build yet failed the same way. -count=1 forces the run. That also keeps the conformance gate honest: a cached result would mean the check never ran against this commit. Making the cat tolerant instead would let the gate silently no-op. |
||
|
Josh Siviour
|
d178ef5992 |
feat: version-aware host-asset preflight for binary-swap deploys (#750)
A binary-swap deploy (make deploy or a manual spx copy) ships a new binary whose host-config prerequisites — the privileged helper scripts and their sudoers grant, placed only by setup.sh / setup-ovn.sh — it does not ship. The node looks healthy and the gap surfaces later as a cryptic launch failure or a silent security regression. Add a preflight package that checks the host against what this build expects, comparing asset content, not existence, so a stale-but-present asset is caught too. The managed helpers install from quoted heredocs, so their on-disk bytes equal the heredoc body verbatim; the binary carries the canonical sha256s and compares. - spinifex/preflight: CheckHost / CheckHostAt, content hash of the two managed helpers and a NOPASSWD grant-line check for the sysctl helper. - Generated canonicalHashes plus a drift guard that re-extracts the heredocs and fails if the committed manifest no longer matches. - Three surfaces: spx admin preflight, a make deploy gate (SKIP_ASSET_PREFLIGHT=1 to bypass), and a non-fatal daemon boot warning. |
||
|
Josh Siviour
|
272b4b22e8 |
feat(ochre): add the vLLM serving AMI and give the daemon a route to it (#740)
* feat(images): add a vllm-serving AMI as a stacked mkosi profile
LaunchServingVM resolves its AMI by the tags spinifex:managed-by=bedrock and
spinifex:bedrock-role=vllm-serving. No image carried either, so every Ensure
failed at resolveServingAMI. The only GPU image ships the NVIDIA driver and
Docker but no Python, no vLLM and no serving unit, so tagging it would have
moved the failure from admission to first boot.
Add a vllm profile that stacks onto gpu-nvidia and owns the whole guest side
of the launcher contract: the runtime, vllm-serve.service, the weights mount
and the tags. vLLM is baked into a uv-managed venv rather than pulled as a
container at boot — a runtime docker pull of vllm/vllm-openai is known to
stall this platform's write plane, and mkosi's unprivileged build has no
daemon to bake an image from anyway.
Also bring images/mkosi.profiles/ under make test-images. Its scripts have no
.sh suffix, so the existing name glob skipped exactly the files worth linting;
sources are found by shebang instead.
* fix(images): make the vllm postinst survive the build sandbox
Two failures found by actually running the build.
uv installs to /usr/local/bin, which mkosi's postinst PATH need not carry, so
`command -v uv` reported a good install as missing. Call it by absolute path,
and check it the same way.
`vllm --version` initialises device config and dies with "Failed to infer
device type" on a builder with no GPU, so it could never have verified
anything. Assert the pinned version through package metadata instead, which
also catches a version mismatch rather than merely a broken entrypoint.
* fix(images): pin the serving AMI datasource and mirror cloud-init to the console
A serving VM boots through LaunchSystemInstance, so it comes up dual-NIC with a
fw_cfg netcfg blob and takes its user-data solely from IMDS — the same shape as
the EKS control plane. That path carries a cloud-init datasource pin; the vllm
profile never got one, and the base config deliberately leaves datasource_list
unpinned, so the serving image was the only system VM booting without it.
Reuse the EKS pin rather than copying it. The 99- prefix is load-bearing:
read_conf_d() applies cloud.cfg.d in REVERSE and mergemanydict() is
first-source-wins, so a 90- name loses to cloud-init's own 90_dpkg.cfg ('_'
sorts above '-') and the pin is discarded in silence. The postinst asserts the
MERGED datasource_list via cloud-init's own read_conf_with_confd rather than
checking the file exists, because it existed at 90- too and did nothing there.
Also mirror every cloud-init stage to the serial console. A serving VM is
headless, and a guest that wedges before handover never surrenders
/var/log/cloud-init-output.log, so the console get-console-output reads is the
only channel an operator has.
The images_test.go case covers the two tags resolveServingAMI filters on; it
matches on those alone and never on name, so a typo hides the image entirely.
* fix(images): make the dhcpcd data-NIC lease genuinely one-shot
dhcp_oneshot() promised to configure the link and exit "leaving no daemon
to fight cloud-init", but the dhcpcd branch passed only -q, which is quiet
rather than one-shot. Every Ubuntu image takes that branch, so a dhcpcd
daemon survived on the data NIC holding the control socket.
cloud-init's Ec2 datasource then runs its own ephemeral dhcpcd on the same
NIC. Instead of spawning, dhcpcd forwards the invocation to the resident
daemon as a control command and exits 0, and --dumplease returns the
resident daemon's lease, so discovery looks successful. Cleanup then waits
for a pid file at /run/dhcpcd/<iface>-4.pid that no process ever wrote,
spinning its full 30000 x 10ms budget: init-local stalls for exactly 300s
on every system-instance boot.
Adding -1 exits once the interface is configured and -p keeps the address
and routes across that exit. Both are needed; -1 alone tears the link back
down. The test now models the real clients — the stub stays resident unless
given the flag that makes its client exit, and the dhcpcd branch is forced
by dropping udhcpc from PATH rather than left to whether the host happens
to have /usr/share/udhcpc/default.script.
* fix(images): serve without a CUDA toolkit and stop vllm-serve crash-looping
vLLM picks FlashInfer for top-k/top-p sampling, and FlashInfer JIT-compiles
that kernel on first use. The serving image ships the driver and the
container toolkit but no nvcc, so the sampler warmup died with "Could not
find nvcc and default cuda_home='/usr/local/cuda' doesn't exist" minutes
into a GPU cold start, after the model had already loaded.
VLLM_USE_FLASHINFER_SAMPLER=0 selects vLLM's native top-k/top-p sampler,
which is the same operation with no CUDA toolchain at runtime. Everything
else on the serving path is already precompiled in the wheels: the attention
backend resolves to FLASH_ATTN and CUDA graph capture completes, both
without nvcc. Baking FlashInfer's AOT modules is the alternative if the
fused kernel is ever wanted, and it keeps the toolchain in the builder
rather than the appliance.
The unit had Restart=on-failure with no bound, so an unfixable start failure
restarted forever and buried its own first traceback under identical copies
on the serial console — the only view an operator has of a headless guest.
StartLimitIntervalSec/StartLimitBurst make it report instead.
The postinst asserts the installed unit carries the sampler setting, for the
same reason the datasource pin is asserted there: the alternative is finding
out at runtime, on a GPU, five minutes in.
Also corrects the shared datasource pin's header, which still claimed it
installs as 90-spinifex-ec2-imds.cfg. It is installed at 99- by the vllm
profile precisely because a 90- name loses the reverse-sorted, first-source-
wins cloud.cfg.d merge to cloud-init's own 90_dpkg.cfg.
* fix(bedrock): raise the serving-endpoint readiness bound to 15 minutes
The 5 minute bound was chosen before any cold start had been measured, and
its own comment asked to be corrected once a model actually ran on wattle.
It now has: Llama 3.2 1B on an RTX A1000 reached "Application startup
complete" 257.6s after launch, leaving ~42s of margin on the smallest model
this platform can serve, with a cold torch.compile accounting for 26.3s of
it. A bigger card and a bigger model are unmeasured.
The two failure modes are not symmetric. Too low tears down an endpoint that
was about to come up and reports it as a failed launch; too high only makes
a genuinely stuck launch take longer to give up. So the bound is set well
clear of the single data point rather than close to it.
The CLI's own wait moves to 20 minutes to stay above it. The daemon starts
its clock when the VM is launched, up to a minute after the CLI starts its
own, so leaving both at 15 would expire the client first and report a bare
"timed out" in place of the daemon's abort, which carries the reason.
* fix: give the Ochre daemon a routed port in the Bedrock system VPC
The readiness probe and every InvokeModel call dial a serving VM's
system-VPC address from inside the daemon, but that subnet lives in OVN
on br-int and the host has no route to it, so a healthy VM never reached
READY.
Each daemon now owns an ENI in the system VPC's private subnet, bound to
an OVS internal port on br-int by iface-id, exactly as ovn-controller
binds a guest tap. The ENI address is installed at the subnet's prefix
length, which is what supplies the connected route. BaseURL is unchanged:
the address it already carried is now reachable.
Describe-or-create keyed on a per-node description, since ENIs carry no
tag filter, so a restart or a second endpoint reuses one address instead
of leaking one per launch. The port is ensured before anything else the
launch creates: a VM the daemon cannot dial holds a GPU for the whole
readiness window before unwinding.
|
||
|
Josh Siviour
|
688ce5ccfd | feat: add AWS model conformance coverage (#736) | ||
|
Josh Siviour
|
a2c451128d |
fix: unblock the Ubuntu 26.04 installer (qemu-kvm, sudo-rs) (#665)
setup.sh aborts twice on resolute. qemu-kvm is a virtual package with two providers there, so apt refuses to resolve it; the token was redundant anyway since $QEMU_PACKAGES already installs qemu-system-x86/arm and spinifex execs the qemu-system-* binaries directly. sudo-rs, Ubuntu's default sudo since 25.10, then rejects the sudoers file: it implements no pam_session Defaults setting, and forbids a wildcard inside a command argument. pam_session is now emitted only for classic sudo, and the sysctl grant names a fixed-verb helper instead of a wildcard. The helper is narrower than the rule it replaces: it accepts one interface, a key restricted to rp_filter or accept_local, and a value restricted to 0 or 1, where the old grant permitted any net.ipv4.conf key at any value. Granting sysctl with an unconstrained argument was rejected as root-equivalent. Adds scripts/lint-apt-packages.sh and an Apt Packages workflow so the runtime package list is resolved against each supported suite's real indices in CI. |
||
|
Josh Siviour
|
3e1f9b1198 |
feat: segscan storage oracle for the real-predastore integration tier (#657)
* feat: add segscan storage oracle for the real-predastore integration tier Adds spinifex/testutil/segscanoracle, which copies a fixture node data dir and execs the mulga umbrella repo's scripts/segscan (a separate Go module that cannot be imported) to assert live/dead-tombstoned/dead-orphan byte accounting against real predastore writes. Kept off the default PR path: a new segscanoracle build tag excludes the test from make test-integration, and a separate segscan-oracle.yml workflow (push to main/dev + manual dispatch only, mirroring e2e.yml's non-gating trigger) checks out scripts/segscan rather than adding that checkout cost to spinifex.yml. * test: cover segscanoracle's pure logic to satisfy diff coverage segscanoracle has no build tag and always compiles into the default build, but nothing in that build exercised it, so every new line counted as uncovered against the 60% diff-coverage gate. Adds unit tests for JSON decoding (including the malformed-payload path), the Locate resolution order, and the directory-copy routine, plus a throwaway stand-in module (not the real scripts/segscan) to exercise build+exec+decode end to end. Pulls decodeReport out of Run and resolveSegscanDir out of Locate so the pure logic is testable without a *testing.T or a real binary. |
||
|
Josh Siviour
|
9c9bb9430c |
test: gate image shell scripts in CI and pin the spot vCPU quota ordering (#641)
* test: gate scripts/images/ shell suites + shellcheck in CI The eks-node/rds-postgres *_test.sh suites and shellcheck only ever ran by hand: spinifex.yml filters pushes on Go-only paths and no job invoked them, so a broken helper could land unnoticed. Add a `make test-images` target and a path-filtered image-scripts.yml workflow so both run automatically on scripts/images/** and images/** changes, kept separate from preflight so image-asset churn doesn't run on every Go contributor's commit. Also clears the shellcheck findings that would have started this gate red (SC1090 on a runtime-resolved source path, SC2154 x2 on eval-assigned variables shellcheck can't trace). * test: pin vCPU quota gate ordering in RequestSpotInstances Nothing asserted that RequestSpotInstances runs the vCPU quota gate before dispatching capacity or launching a VM, so a regression that dropped or reordered EnforceLaunch would pass silently. Add an ordering test using a real quota.Service (embedded JetStream KV) and real NATS responders standing in for the capacity and launch daemons, recording a global call sequence and asserting the gate's index precedes both. Verified by removing the gate: the first quota-KV read then comes from the post-launch charge instead, landing after capacity dispatch and launch, and the ordering assertion fails as expected. |
||
|
Josh Siviour
|
6ce8b9ff18 |
fix: fail preflight when a gate tool is killed instead of reporting it clean (#633)
A tool whose child dies by signal can still exit 0 through go tool, so govulncheck printed 'ok' after being OOM-killed and preflight passed without a vulnerability scan having run. Route lint, govulncheck and nilaway through scripts/run-gate.sh, which fails on a non-zero exit or on signal-death output. |
||
|
Josh Siviour
|
135da2371e |
fix: scope golangci-lint cache per worktree, correct eks-node-gpu catalog description (#629)
* fix: scope golangci-lint cache per worktree golangci-lint's default cache under ~/.cache/golangci-lint is keyed by module path rather than worktree path, so parallel worktrees of this module collide and surface each other's lint issues, including from worktrees that have since been deleted. * fix: correct eks-node-gpu catalog description to match agent-only image The GPU node image never installs eks-token-webhook or a server/agent role selector, per scripts/images/eks-node-gpu/manifest.conf; it ships ecr-credential-provider only and is agent-only because GPU nodes never run the EKS control plane. |
||
|
Julian Sommer
|
32d80b473a | feat: RDS v1 foundations (#592) | ||
|
Julian Sommer
|
b505887b36 | chore: add nilaway | ||
|
Josh Siviour
|
88b57b1805 |
chore: give the integration tier its own CI job and drop it from preflight (#577)
The tier ran inside the Build and Test job, serialised ahead of test-cover, and again in preflight. Neither placement bought signal that a parallel job does not: it provisions nothing and finishes in seconds, so the only effect was wall time on the two paths developers wait for most. It stays PR-blocking as its own job, which is what distinguishes it from e2e.yml's front gate — that one is push-triggered on a self-hosted runner and so never gates a PR before merge. |
||
|
Josh Siviour
|
48749576c3 |
test: rebalance E2E into in-process integration tier + shared-guest live scenarios (#556)
* test: add in-process integration test tier Roughly half of the behavioural tests under tests/e2e/ assert control-plane API shapes, authz and error codes that need no live environment, yet they can only run against a tofu-provisioned environment on a scarce self-hosted runner. This adds the tier they can move down to. The real gateway router runs in-process: SetupRoutes() is a pure function of GatewayConfig, so it serves from an httptest server over embedded NATS JetStream with real IAM/STS services and genuine SigV4 verification. Only the daemon side of the wire is faked -- the ec2.*/ebs.* NATS subjects a live node would answer are stubbed per test. Nothing is provisioned and no fixed ports are bound, so the tier runs concurrently on a shared build host and is safe as a CI front gate ahead of the live suites. It is build-tagged and kept out of preflight, which stays unit-only. * test(integration): add IAM/STS client accessors and port the zero-stub authz tests Adds IAMClient/STSClient plus ClientsWithCreds/ClientsWithSessionCreds so a test can act as a principal other than the seeded root user, and stubs the node-discovery subject in StartGateway so call paths that trigger discovery resolve immediately instead of riding out the fan-out timeout. Ports the four enforcement tests that guard on ec2:DescribeRegions, a gateway-local action, so they need no daemon-side stub at all. * test(integration): port remaining IAM/STS authz tests from e2e Ports TestIAMUserCRUD, TestIAMAccessKeyLifecycle, TestIAMUserAuthentication, TestIAMPolicyCRUD, TestIAMPolicyAttachmentEnforcement, TestIAMPolicyLifecycle, TestIAMGroupsLifecycle, TestIAMRolesAndProfiles and TestSTSAssumeRoleAndGetCallerIdentity from tests/e2e/iam/ into the in-process integration tier. Each test now self-bootstraps its own users/policies/roles instead of relying on shared suite-level state, since every integration test gets its own gateway and embedded NATS. TestIAMRolesAndProfiles stubs ec2.IamProfileAssociation.describe because DeleteInstanceProfile always counts live associations over NATS regardless of which guard actually fires. TestIAMCleanup is not ported: it only swept a shared long-lived E2E environment, and every ordering/dependency assertion it made is already covered by TestIAMPolicyLifecycle, TestIAMGroupsLifecycle and TestIAMRolesAndProfiles's own delete-conflict guards. * test(e2e): remove IAM/STS authz tests migrated to the integration tier All 13 signed-request authz tests plus TestIAMCleanup now have faithful, mutation-proven equivalents in tests/integration/ — the gateway dispatches IAM/STS actions directly with no daemon hop, so the in-process tier is a faithful and far cheaper substitute. The iam/ e2e suite now runs only TestIAMInstanceProfileAssociation and TestIMDS. Drop the now fully-dead iam_helpers_test.go alongside the six deleted test files, and remove harness.IAMGroupARN/IAMDeleteGroupBestEffort, which had no remaining caller anywhere in the repo once iam_groups_test.go was gone. * feat(integration): daemon-lite harness for key/tags/routetable/vpc Adds DaemonLite, an in-process stand-in for a live spinifex daemon that subscribes the real key, tags, route table, and VPC/subnet/SG/IGW service implementations directly to their NATS subjects, backed by memory and embedded-JetStream stores. Ports TestKeyPairs, TestTagManagement, TestRouteTableValidation, and TestReplaceRouteConvergence from tests/e2e/single so the integration tier drives genuine daemon-side business logic instead of StubSubject canned replies. vpcd (OVN) is out of scope, so its "vpc.create-sg"/"vpc.delete-sg" acknowledgements are stubbed with a fixed success reply — the SG record itself is still written by the real service impl before that event fires, so the stub only unblocks the synchronous round-trip rather than replacing tested behavior. * ci(e2e): gate live E2E jobs behind the in-process integration tier Runs the in-process integration suite first, on the ci-single runner host rather than inside a provisioned VM, so a broken control plane is caught before either live job pays the Spinifex install. Both e2e_single and e2e_multi now require it, and e2e_status treats a skipped integration job as a failure so the gating status cannot go green on a gate that never ran. Drops the shadow-mode suite selector: targeted per-diff suite selection is not the direction being pursued, and leaving a non-functional shadow job in the gating workflow only invited it to be mistaken for a live gate. * test(e2e): remove single/ tests superseded by daemon-lite ports TestKeyPairs, TestTagManagement, TestRouteTableValidation, and TestReplaceRouteConvergence now have proven-equivalent ports in tests/integration/ (mutation testing confirmed parity). Delete the e2e originals and their runX helpers, along with keypair_test.go's and tags_test.go's file-local helpers left with no caller. generateImportPubKey is shared by other single/ tests so it moves to helpers_test.go instead of being deleted. Slims the manifest-lint baseline for the removed create-call entries. * ci: run the lb e2e suite on multinode only Both e2e jobs filter SUITES by exclusion, and neither excluded lb, so the suite ran twice per e2e run: 354s on single and 654s on multi. Balancing across instances on one node is not a deployment mode we support, and ELBv2 proper requires two AZs, so the single-node run was redundant. Drops ~354s from the single-node job, which is the gate critical path. * test(integration): port 3 of 7 ECR tests to the in-process tier Wires the gateway's ECR control plane (repository/policy/lifecycle metadata over an in-process daemon-lite NATS subscriber, blob and manifest bytes via a memory object store, JWT issuer/verifier keyed off the existing IAM master key) into the integration harness, and ports TestECRControlPlane, TestECRGetLoginPassword, and TestECRIAMAuthorization_AssumedRolePullOnly from tests/e2e/ecr — each proven equivalent by mutation (evaluatePrincipalPolicy forced to allow, and the repo-describe path forced to not-found) before its E2E original was removed. The other 4 authorization tests (PullOnly, ReadOnly, DetachPolicyDeniesImmediately, DeactivatedKeyReturns401) stay on the E2E tier: AttachUserPolicy lacks the AWS-managed-ARN existence-check bypass that AttachRolePolicy/AttachGroupPolicy already have, so attaching AmazonEC2ContainerRegistryPullOnly/ReadOnly straight to a user fails NoSuchEntity in both tiers alike. Left untouched pending a fix to that shared IAM code. * fix(iam): accept AWS-managed policy ARNs on AttachUserPolicy AttachUserPolicy called getPolicyByARN unconditionally, so attaching an AWS-managed ARN to a user returned NoSuchEntity. AttachRolePolicy and AttachGroupPolicy already skip that lookup for AWS-managed ARNs and store them opaquely; the user path was missed when that guard was introduced. ListAttachedUserPolicies had the mirror of the same gap: it resolved every ARN through getPolicyByARN and silently dropped the ones it could not find, so a managed ARN would disappear from the listing rather than round-trip. Evaluation already handled these correctly via resolveAttachedPolicy, so only the write and list paths needed the guard. * test(integration): port remaining 4 ECR authorization tests Ports TestECRIAMAuthorization_PullOnly, _ReadOnly, _DetachPolicyDeniesImmediately, and _DeactivatedKeyReturns401 from tests/e2e/ecr now that AttachUserPolicy accepts AWS-managed policy ARNs. Each was proven equivalent by mutation before its E2E original was removed: PullOnly/ReadOnly/DetachPolicyDeniesImmediately fail when evaluatePrincipalPolicy is forced to always allow, and DeactivatedKeyReturns401 fails when the access-key-active check in resolveECRLongLivedPrincipal is bypassed. All mutants were reverted and a clean run confirmed before committing. tests/e2e/ecr/iam_authorization_test.go is now fully removed — every test it held has an in-process equivalent, and its helpers had no other callers in the package. * ci: select e2e suites by allow-list instead of deny-list Both jobs filtered SUITES by exclusion, so any suite named in neither deny-list ran in both jobs. That is how lb came to run twice per e2e run, and it makes adding a suite silently fan it out everywhere. Each job now names the suites it is eligible to run. Selection is still driven by SUITES, so this is behaviour-preserving for the current default: single/iam/cert on the single-node job, multinode/lb/cert on the multi-node job, exactly as before. eks, ecs and storagegrowth are listed as eligible on the single-node job but are not yet in the default SUITES. * test(e2e): delete seven tests with no coverage TestFinalClusterStats and TestInstanceLaunch assert nothing beyond what other callers of their shared helpers already imply. The multinode baseline, volume, guest-SSH, and preflight tests duplicate single-node coverage or exercise per-guest behaviour that isn't cluster-specific. TestMultinodeInstanceDistribution can't fail: three independent RunInstances calls with no placement group make a strict spread assertion flaky and a loose one meaningless. Preflight checks (/dev/kvm writability, peer SSH reachability) move into requireMultiNodeFixture so the package fixture singleton still fails fast with a clear message instead of disappearing along with the dedicated test. The remaining callers of needInstanceTrio (CrossNodeOps, CrossNodeGateway, NodeFailure, VolumeDurability) still trigger the shared trio launch on their own, so removing the distribution and volume-lifecycle tests doesn't leave it unbuilt. Also slims the manifest-lint baseline entry for the deleted multinode volume test. * fix(e2e): require full 3-node spread in TestMultinodeSpread SpreadPlacement passed at unique>=3, warned via t.Logf at unique==2, and only failed below that. A 33% spread failure (two instances colocated) passed with a log line. The 243.6s NAT-egress scenario that follows only proves what it claims to if the private trio actually landed on three distinct chassis, so that premise needs to be a hard assertion, not a warning. * refactor(e2e): drop the unused spread-assertion harness helpers AssertSpreadAcrossNodes and CountInstancesPerNode lost their only caller when the instance-distribution test was removed. Beyond being dead, the assertion helper documented minNodes=1 as an acceptable logging-only mode inherited from the bash driver, which is the pattern that let a placement test pass while every instance landed on one node. InstanceHostingNode and its ps helpers stay; five multinode tests use them. * fix(ec2): stop leaked goroutines on prepareEFIVolume error paths newViperblock starts the chunk uploader and WAL syncer unconditionally, but prepareEFIVolume only released them on the happy path via Close(). Six error returns between acquisition and Close left both goroutines running. Add a defer immediately after acquisition, matching the sibling prepareRootVolume; Close() remains the durability boundary. * test(predastore): add real predastore fixture for integration tests Extract predastore_integration_test.go's inline daemon startup into a reusable testutil/predastore package so tests/integration can point DaemonLite-style wiring at a real S3-compatible backend instead of an unreachable host. Kept as its own leaf package rather than folding into the shared testutil package: it transitively imports predastore's quicclient, whose package-level connection pool starts a permanent goroutine at init that would trip goleak checks in any of the ~80 other packages that import testutil for unrelated NATS helpers. * test(integration): migrate CreateVolume to assert real predastore persistence Add StartVolumeDaemonLite, an opt-in DaemonLite variant wired to the real predastore fixture, and migrate TestCreateVolume_PersistsToRealPredastore off memory-backed DaemonLite so CreateVolume/DescribeVolumes exercise viperblock's real S3 backend end to end instead of stopping at input validation. * test(integration): add real storage-state oracle for CreateVolume DescribeVolumes only proves the handler's own read path agrees with its own write path, both via the same deserialization; it cannot catch a bug in a field it never re-derives (e.g. a unit-conversion error in the bytes handed to viperblock, since VolumeMetadata.SizeGiB is copied from the request directly). vbscan reads a volume's persisted config.json and chunk objects straight over S3, independent of any spinifex handler code, so TestCreateVolume_PersistsToRealPredastore can assert on what viperblock actually wrote rather than only on what the handler claims. vbscan is a local reimplementation of scripts/vbrefscan's read-only scan rather than an import: spinifex cannot depend on mulga, the module that contains it. It only reimplements the config/chunk-listing half of vbrefscan — the checkpoint-based reference-integrity half needs viperblock.ParseBlockCheckpointBytes, which does not exist in the viperblock version spinifex currently depends on (v1.12.1) and is also moot for this volume: CreateVolume never calls SaveLiveCheckpoint, so a freshly created volume has no checkpoint to scan regardless of version. * refactor(test): move the predastore daemon fixture out of the coverage scope test-cover runs go test ./spinifex/..., so anything under spinifex/ is compiled and measured. The daemon fixture cannot be exercised by unit tests, so it reported a coverage gap no unit test could close. The e2e harness already avoids this by living under tests/; the fixture now does the same. vbscan stays put, being ordinary library code with its own unit tests. * test(integration): migrate RunInstances multi-count expansion off live guests RunInstances with MinCount/MaxCount=2 expands into a single per-node targeted launch (distributeInstances in gateway/ec2/instance/placement.go) before the daemon-facing NATS hop, so the real gateway router plus a stubbed daemon response is sufficient to prove it — no throwaway VM is needed to exercise the expansion logic itself. The live single-node E2E test's WaitForInstanceState/TerminateInstances sequence was teardown hygiene for the real guests it booted, not an assertion of the expansion behavior, so it is dropped rather than emulated. The migrated test additionally asserts the per-node launch request itself carries MinCount=MaxCount=2, proving the count actually propagates rather than the launch succeeding by coincidence or via the zero-daemon degenerate path in placement.go. * docs: drop a doc reference to the deleted live test * test(integration): migrate launch-template RunInstances expansion off live guests RunInstances --launch-template resolves ImageId/InstanceType from the stored template entirely gateway-side (expandLaunchTemplate, before validation/placement/the daemon-facing NATS hop), so proving it forwards the resolved fields never needed a real guest boot. Ports the assertion to tests/integration via a new opt-in StartLaunchTemplateDaemonLite (real LaunchTemplateServiceImpl over embedded JetStream) plus a direct subscription on the per-node launch subject to capture what the gateway actually dispatched, rather than only the client-visible response. The live test keeps its CRUD/versioning lifecycle (create/modify/delete version, tag-filtered describe) — none of it touches a guest — and drops only the RunInstances-from-template + wait-for-running + terminate tail, whose only job was waiting out a real boot to read back fields already proven resolved. * test(integration): migrate KV-only account-scoping checks off live tenants Ports the KeyPair/VPC-Subnet/IGW-EIGW/AccountSettings cross-account isolation assertions from tests/e2e/single/account_test.go to the in-process integration tier. Each of these resources resolves ownership from a plain account-scoped KV key (utils.AccountKey(accountID, id), or an account-keyed settings record) with no vm.Manager or real guest involved, so DaemonLite now also wires the real EgressOnlyIGWServiceImpl and AccountSettingsServiceImpl alongside the existing VPC/IGW/Key services. Two independently minted tenant accounts (via IAMService.CreateAccount/CreateUser/CreateAccessKey/CreatePolicy/ AttachUserPolicy, in-process — the same calls runAccountCreate makes without the CLI/stdout round-trip) replace the live tier's carousel so isolation is checked between real, separately owned accounts. Left live: instance scoping (Step2) and volume scoping (Step3) — checkInstanceOwnership, the actual cross-account gate for stop/start/ reboot/terminate/attach-volume, runs daemon-side only after a real vm.Manager lookup, so it cannot be exercised without a live guest. Snapshot scoping (Step5) needs a real backing volume for CreateSnapshot (viperblock, out of DaemonLite's scope), so it stays live entirely rather than split off only its two KV-only assertions. Global-resources (Step9) carries no account branching in the handlers at all, so asserting its equality across two accounts wouldn't exercise anything a fake node responder didn't already trivially satisfy — not migrated. * test(integration): migrate launch-template CRUD lifecycle off live guests TestLaunchTemplates booted zero guests: its RunInstances coverage had already moved to TestRunInstances_LaunchTemplateExpansion, leaving only template CRUD/versioning assertions occupying a full live-cluster slot. Port the remaining create/describe/version/modify/delete lifecycle, including the SourceVersion merge and a nested timestamp round-trip, into TestLaunchTemplates_CRUDLifecycle against the in-process integration gateway. * refactor(tests): move spot instance lifecycle coverage to integration tier RequestSpotInstances is a mock over on-demand RunInstances (no bidding, interruption, or reclamation), so booting real VMs in the e2e tier proved nothing spot-specific. Migrate the SIR CRUD lifecycle (request, describe, cancel, close-on-terminate, insufficient-capacity error) to a NATS-level integration test that exercises the real gateway orchestration and daemon service impl without a live guest. Real-VM-boot assertions are already covered by TestRunInstances_MultiCountExpansion and the e2e baseline tests. * fix(tests): share one embedded NATS server across the integration package ClientTokenStore in spinifex/gateway/ec2/instance is a process-wide sync.Once singleton bound to whichever *nats.Conn first initialises it. Every integration test booted its own embedded NATS server, so the first RunInstances-calling test captured the singleton, and any later test inherited a KV handle bound to that server's now-closed connection. TestMain now boots one embedded NATS+JetStream server for the whole package; every StartGateway call connects into its own dynamically provisioned NATS account (accountAuthenticator in shared_nats.go), giving each test a private JetStream namespace despite the shared server, and none of the per-test connections are closed until every test has finished - whichever one the singleton latches onto stays live for the run. Also wire the suite into the required PR gate: it was previously only invoked from e2e.yml's push-triggered (main/dev), self-hosted "Integration (front gate)" job, so a regression here never blocked a PR. The whole package runs in single-digit seconds, so it now runs inline in `make preflight` and as its own step in spinifex.yml's build_and_test job. * test(integration): migrate serial-console access checks off live guests Enable/Disable/GetSerialConsoleAccessEnabled is pure gateway+account-settings logic with no guest involved, so it moves to the in-process integration tier against the real AccountSettingsServiceImpl wired into DaemonLite. * test(integration): migrate DescribeImages round-trip off live guests runImage's AMI describe round-trip needs no real cluster: it registers an AMI against a hand-seeded snapshot via the real ImageServiceImpl, backed by a new StartImageDaemonLite helper wiring RegisterImage/DescribeImages onto an in-memory object store. * test(integration): migrate predastore object lifecycle off live guests runPredastoreObjectLifecycle only needs a real predastore daemon, not a tofu-provisioned cluster: it now runs against tests/fixtures/predastore's in-process fixture, covering the same create/put/get/delete/list contract. * test(integration): migrate ListFoundationModels catalog check off live cluster ListFoundationModels is pure gateway-side static catalog logic with no NATS/daemon hop, so it moves to the integration tier via a new BedrockClient harness accessor; this tier configures no credential resolver, so the Anthropic entry's absence is asserted explicitly rather than left optional. * test(integration): cover RunInstances client-token idempotency Proves replaying the same ClientToken through the real gateway returns the original reservation without a second daemon dispatch, and a different token launches independently. * test(integration): cover RunInstances launch-template expansion Proves version selection (omitted Version resolves to the template default, explicit Version selects that version) and field precedence (explicit RunInstances parameters override the template, unset fields inherit it) through the real gateway. * test(integration): cover RunInstances malformed-input rejection Proves a malformed ImageId and a malformed targeted-launch CapacityReservationId are rejected before any NATS dispatch, with no daemon stub registered so a regression that let either through would fail fast instead of hanging. * test(integration): cover RunInstances iam:PassRole enforcement Proves a caller granted ec2:RunInstances but not iam:PassRole on an instance profile's role is denied, and the identical session succeeds once PassRole is granted for that exact role ARN. * test(integration): cover RunInstances placement-group strategy routing Adds a placement-group daemon-lite wiring a real PlacementGroupServiceImpl over NATS, then proves spread strategy assigns exactly one instance per node while cluster strategy pins the whole launch to the single highest-capacity node. * test(integration): cover RunInstances capacity distribution across nodes Proves the default (non-placement-group) path packs a multi-instance launch across nodes proportionally to spare capacity rather than exhausting one node first. * test(e2e): merge SameSGComms and SGToSGDatapath around one client/target pair Both booted their own instance pair to check SG-to-SG datapath enforcement and same-default-SG east-west connectivity. Merging them around one shared client/target pair cuts four boots to two, and converting the inline harness.Step sequence into named t.Run stages (PortGroupMembership, AllowedTraffic, DeniedTraffic, RevokeAndVerifyBlocked, ReauthorizeAndVerifyRestored, SameSGComms) gives each its own pass/fail attribution instead of one opaque test result. SameSGComms now runs last and joins the default SG onto each ENI via ModifyNetworkInterfaceAttribute only after every SG-to-SG allow/deny assertion has already recorded its own result, since the default SG's self-reference rule admits all traffic between co-members and would otherwise defeat the denied-traffic check. * test(e2e): merge default-SG reachability, guest DNS, and egress enforcement DefaultSGReachabilityBaseline, GuestDNSResolution, and SecurityGroupEgress each booted their own instance to check one facet of "a guest is reachable only when policy says so": ingress deny/authorize, resolver + WAN egress, and egress ACL enforcement. Merging them around one shared guest cuts three boots to one, with named t.Run stages (Deny, Authorize, Resolver, WANEgress, RevokeEgress/RestoreEgress) giving each its own attribution. The egress revoke/restore round-trip now mutates this scenario's own dedicated SG instead of the shared default SG the rest of the suite depends on, isolating its egress-rule mutation from every other test. * fix(ci): single-quote e2e test_run regex across the ssh boundary * fix(e2e): anchor SG egress-enforcement probe to a WAN IP, not the gateway * test(e2e): merge single-node guest churn tests into one durability scenario Combines TestSSHProbe, TestENIHotplug, TestENIHotplugReconcile, TestVolumeDurability, TestModifyInstanceAttribute, and TestRebootInstance into TestGuestChurnDurability, a single shared-guest scenario that re-verifies a data-integrity sentinel sha256 after every perturbation stage (ENI hotplug, daemon restart, ENI detach, instance-type resize, stop/start, reboot). This proves the sentinel survives the full churn sequence rather than just one isolated stop/start. * fix(vpc): clear subnet drop gate when installing egress reroute A subnet with an attached IGW but no 0.0.0.0/0 route carries a priority-1100 drop gate on the VPC router. When a route later lands (NATGW reroute at 900, IGW reroute at 1000) the reroute is installed but the drop gate was never removed, so the higher-priority gate wins and black-holes the subnet's egress in lr_in_policy before it reaches routing or SNAT. This left NAT-gateway private-subnet egress with 100% packet loss: the SNAT stage saw zero packets and no conntrack was committed. Remove the subnet's drop gate for the same prefix once a reroute is installed. Idempotent and prefix-scoped, so a specific-prefix reroute is a no-op and leaves the default gate intact. * test(e2e): merge VPC subnet, NAT gateway, and EIP single-node tests Merges the former TestVPCSubnetE2E, TestNewVPCEgressBaseline, TestNATGateway, and TestInstanceEIP into one staged scenario, TestVPCEgressPaths, around one scenario-owned VPC and its two guests, cutting five guest boots to three. The public guest serves PublicSubnetEgress, then the NAT Gateway bastion hop, then (last, since association rewrites its public IP) the EIP flip. The private guest serves the NAT Gateway path, launched directly into the same VPC's already-existing private subnet instead of a dedicated one. RouteBeforeSubnet keeps its own second VPC and instance since it exercises the implicit main-route-table code path, a different one than the explicit route table this scenario's own VPC uses for its public subnet — collapsing the two would drop coverage of whichever path got merged away. The NAT Gateway up/down flip now repeats for an env-tunable round count (SPINIFEX_VPCEGRESS_NAT_ROUNDS, default 1), matching every other merged single-node scenario. * test: TEMPORARY mutation-check — revert |
||
|
Julian Sommer
|
47604f43dc | chore: go 1.26.5 | ||
|
Josh Siviour
|
24bd50a53c |
feat: ecs-node AMI (alpine + containerd + ecs-agent baked) (#415)
Adds the spinifex-ecs-node AMI variant: alpine 3.21.7 + containerd + runc + cni-plugins + ca-certificates with the ecs-agent binary baked to /usr/local/bin and three OpenRC services wired in dependency order (ecs-ca-install -> containerd -> ecs-agent). - manifest.conf drives build-system-image.sh (no host mounts). - ecs-ca-install.initd: first-boot oneshot installing the cloud-init delivered gateway CA into the system trust; no-op when absent. - ecs-agent.initd: sources /etc/spinifex-ecs/agent.env, backgrounds the agent after net + containerd. - 10-bridge.conflist: CNI bridge for task networking (Sprint 4d). - setup.sh: exec bits, /opt/cni/bin symlink, content-store dirs, ttyS0 console reorder + fast boot menu. - Makefile: build-ecs-node-image / import-ecs-node-image targets. |
||
|
Josh Siviour
|
93db7e4d1b |
feat(ecs): ecs-agent skeleton + containerd image pull (Sprint 4c) (#414)
* feat(ecs): ecs-agent skeleton + containerd image pull (Sprint 4c) Add the ecs-agent binary that runs inside an ECS container instance: it resolves host identity from IMDS, registers on the Layer-2 NATS bus, and heartbeats while alive. Image pulls go through a containerd-backed ImagePuller behind an interface, with an ECR resolver that mints GetAuthorizationToken creds from the instance role. Extract the IMDS-credential and ECR-auth flow out of ecr-credential-provider into internal/imdscreds and internal/ecrauth so the agent and the kubelet provider share one implementation. Add spinifex/handlers/ecs/bus as the single source of truth for Layer-2 subject builders and wire payloads, shared by the agent now and the scheduler in Sprint 4e. * build: pin genproto via replace to fix containerd/v2 ambiguous import go.opencensus.io -> grpc@v1.33.2 drags the pre-split monolithic genproto into the module graph; it still ships googleapis/rpc/status, which collides with the split genproto/googleapis/rpc module that containerd/ttrpc needs. The main module never imports the monolith, so a plain require bump is dropped by 'go mod tidy'. Pin it with a replace to a post-split version so the fix survives tidy and contributors can run 'go mod tidy' freely. * fix(ecs): agent boot failsafes from runtime verify - Build the ECR gateway HTTP client lazily on first image pull instead of at boot. A missing/malformed gateway CA no longer kills the agent before it can register + heartbeat, matching the best-effort containerd path. - Actively probe containerd with IsServing in runtime.New. The client dials lazily, so a dead socket previously slipped past the boot-time 'containerd unavailable' warn and only surfaced on the first pull. - Make the heartbeat interval configurable via ECS_HEARTBEAT_INTERVAL (default 30s) for test/verify and slow-link tuning. |
||
|
joshsiv-mulga
|
022c6cfd2a |
Update Makefile
Signed-off-by: joshsiv-mulga <mrk@mulgadc.com> |
||
|
Josh Siviour
|
d076a434d4 |
Feat/e2e targeted suites (#352)
* test(e2e): add targeted suite selector + shadow-mode CI step
select-suites maps a diff to the e2e suites it must run: changed files →
services (manifest path/additional_paths) → consumer closure over
depends_on vs publishes/subscribes → suites whose covers intersect.
Special cases force-all (infra/harness/workflow, ≥3 services, submodule
bumps) or a lone suite dir; empty diffs fall back to default suites. An
AST scan of each suite's harness.Ensure* call graph derives per-test
service coverage and emits an optional -test.run subset (RUN_PATTERN).
Wired into e2e.yml as a non-gating 'Select Suites (shadow)' job that
logs the computed selection to the run summary so predicted vs actual
can be compared before the selector drives SUITES.
* ci(e2e): add dispatch-only per-suite job blocks grouped by env
Restructure the looped e2e flow into env-grouped provision -> matrix
suites -> teardown blocks so each suite surfaces as its own node in the
Actions graph instead of a single green tick:
single_provision -> single_suite [single,cert,lb,eks] -> single_teardown
multi_provision -> multi_suite [multinode] -> multi_teardown
Provision resolves the VM/cluster and ships test binaries, emitting WAN
IP + ssh key path as job outputs; each matrix leg runs one suite over
SSH and uploads its own junit/analysis artifacts; teardown (if:always)
reuses the persisted tofu workspace on the same runner to destroy.
workflow_dispatch only -- runs alongside the gating e2e.yml for
validation and posts no commit status.
* test(e2e): add manifest drift lint (fixture-create + NATS subject)
Bead 5 of the targeted-suite-selection plan. Two ratcheted drift guards in
tests/e2e/manifest-lint, wired into make preflight and the spinifex.yml PR job:
- Fixture lint: AST-flags direct resource-create AWS calls
(c.EC2.RunInstances, c.ELBv2.CreateLoadBalancer, ...) in suite test files,
steering them through harness.Ensure* fixtures. ~104 pre-existing call sites
are captured in a checked-in baseline; the lint fails only on NEW creates.
Intentional create-path tests opt out with an inline // e2e:allow-create.
- Subject lint: extracts NATS subject literals from the natsSub{} registry and
literal Subscribe/Publish/Request args, cross-referenced wildcard-aware
against service-interfaces.yaml. Code subjects missing from the manifest fail
(ratcheted); manifest subjects with no static reference warn only (many are
produced dynamically). Fixed real drift surfaced on first run: declared the
five spinifex.cluster.shutdown.* phase subjects under spinifex_daemon.
manifest-check is now CI-enforced alongside manifest-lint (previously
preflight/local-only).
* feat: run-scoped e2e teardown sweep
Tag every Ensure* fixture resource with e2e:run=<run-id> when
SPINIFEX_E2E_RUN_ID is set, and add a teardown.test suite that sweeps
everything carrying that tag at end of run — reclaiming resources leaked
by a crashed suite, an interrupted run, or a persistent cluster.
- harness/sweep.go: tagRunResources (EC2 CreateTags) + tagRunELB (ELBv2
AddTags) + SweepRunResources in dependency order (LB, instances, NAT,
snapshots, volumes, images, SGs, subnets, key pairs). Blank run id
no-ops both tagging and sweeping, so the sweep can never touch an
untagged or foreign resource.
- harness/fixtures.go: stamp the run tag on each created resource.
- tests/e2e/teardown: thin suite that runs the sweep; skips without a
cluster or run id, logs the report, never fails the run.
- e2e-suites.yml: build + ship teardown.test, pass the run id into suite
legs, sweep on the VM in both teardown jobs before tofu destroy.
|
||
|
Julian Sommer
|
773341248d | feat: use STS tokens on frontend (#322) | ||
|
Josh Siviour
|
467e4de715 |
feat(eks): publish eks-node AMI to R2 + spx catalogue entry (#313)
* feat(eks): publish eks-node AMI to R2 + spx catalogue entry Add a spinifex-eks-node catalogue entry so operators install the EKS node image with a single command: spx admin images import --name spinifex-eks-node The entry pulls the Alpine+K3s image from iso.mulgadc.com, verifies its sha256, and stamps spinifex:managed-by=eks — the tag the control-plane and node-group launchers resolve the boot AMI by, so no extra config is needed. Add scripts/publish-system-image.sh (+ make publish-eks-node-image) to convert the built raw to a compressed qcow2, emit a checksum sidecar, and upload both to the R2 bucket backing iso.mulgadc.com/system-ami via the S3 API. * ci(eks): add manual workflow to build + publish eks-node AMI to R2 Build the eks-node AMI on the runner (libguestfs) and publish via publish-system-image.sh using the existing CF_R2_* secrets. Manual workflow_dispatch with a dry-run input. Fix the publish script's default bucket to spinifex-iso (the bucket iso.mulgadc.com is served from). |
||
|
Josh Siviour
|
f14fb64562 |
feat(eks): unify eks-server + eks-agent into one eks-node AMI (#288)
* feat(eks): unify eks-server + eks-agent into one eks-node AMI Collapse the two K3s AMIs into a single spinifex-eks-node image whose role (server vs agent) is chosen per-instance at first boot, halving build time, storage, and CVE-rotation surface. - scripts/images/eks-node/: superset manifest + merged setup.sh; all role services baked but only crond + the new eks-node-role selector enabled. - eks-node-role first-boot selector reads SPINIFEX_K3S_ROLE, rc-update adds + starts the matching services (server: k3s + eks-token-webhook + k3s-first-boot publisher; agent: k3s-agent), records /etc/spinifex-eks/role, self-disables. Paths are env-overridable; eks-node-role_test.sh covers all five cases. - mulga-eks-etcd-snapshot.sh early-exits on agent nodes. - k3s_server_vm.go seeds SPINIFEX_K3S_ROLE=server into first-boot.env. - Makefile/dev-install: build-eks-node-image / import-eks-node-image replace the server+agent targets. - Delete scripts/images/eks-server + eks-agent. The launcher resolves the AMI by the spinifex:managed-by=eks tag, so running clusters (which hold the resolved AMI ID) are unaffected. AMI bake + cluster boot are operational integration steps, not yet run. * fix(eks): order eks-node-role after cloud-config/cloud-final The first-boot role selector reads /etc/spinifex-eks/first-boot.env, which cloud-init delivers via write_files in the cloud-config/cloud-final stages. The selector only depended on net+cgroups, so on a fast boot it could start before write_files landed and read a missing role env. Add an after-ordering on cloud-config + cloud-final so the env file is always present first. |
||
|
Josh Siviour
|
b0227e7eeb |
chore(ansible): remove ansible tree, uplift to mulga/ansible/ (#287)
Ansible orchestrates the whole stack (spinifex + predastore + viperblock + OVN + tofu hosts) and its spec/beads live in mulga. Moving it to top-level mulga/ansible/ ends the per-change submodule-pointer-bump friction. - git rm -r scripts/ansible/ - Makefile: drop ansible-dev-* / ansible-cluster-bootstrap targets + .PHONY The tree lands at mulga/ansible/ (flat copy, Option B). History pivot: tag feat/uplift-ansible-snapshot-pre-move marks the pre-move HEAD. Plan: docs/development/improvements/ansible-uplift-to-mulga.md (in mulga). |
||
|
Josh Siviour
|
bbff004b45 |
feat(eks): 6b create-cluster → ACTIVE (single-node SQLite + mgmt-IP NLB stop-gap) (#280)
* feat(eks): cluster_state KV helpers — ClusterMeta + status CAS + prefix sweep
Stage 1 of Sprint 6b CreateCluster lifecycle. Introduces the first
read/write helpers against the eks-account-{accountID} bucket so later
stages (oidc keypair, NLB wiring, cluster reconciler) can persist state
without re-inventing CAS/sweep logic.
- ClusterMeta struct holds the DescribeCluster source of truth (status,
endpoint, OIDC issuer, CA, VPC config, control-plane VM + ENI, NLB ARN).
- ClusterStatus enum mirrors the AWS EKS string set verbatim.
- PutClusterMeta is unconditional (CreateCluster path); GetClusterMeta
returns ErrClusterNotFound on key absence so the service boundary can
map to ResourceNotFoundException.
- SetClusterStatus is revision-checked with bounded CAS retries so the
reconciler and CreateCluster body cannot wedge each other.
- DeleteClusterPrefix sweeps every clusters/{name}/* key; called from
DeleteCluster after the OIDC private key is zeroized.
Tests cover round-trip, missing/corrupt blob, idempotent status set,
DELETING transition from every prior state, concurrent revision bump
recovery, sibling-cluster preservation, empty-bucket no-op.
Plan: docs/development/feature/eks-6b-create-cluster.md
* feat(eks): per-cluster ECDSA-P256 OIDC keypair generation + zeroize
Stage 2 of Sprint 6b. Lays the at-rest primitives the CreateCluster body
will call before launching the K3s server VM. Pure crypto helpers — no
daemon, no launcher, no NATS bus.
- GenerateClusterOIDCKeypair mints an ECDSA-P256 keypair per cluster
(matches eks-v1.md Q8), PEM-marshals the private as PKCS8,
envelope-encrypts it via handlers_iam.EncryptSecret (AES-256-GCM,
AwsGW masterKey), writes the ciphertext to OIDCSigningKeyKey, and
publishes the public JWKS document to OIDCJWKSKey. Returns the JWKS
bytes so CreateCluster can hand them straight to user-data without
a follow-up KV read.
- JWKS shape mirrors what handlers_sts.JWKS already decodes for IRSA
verification (RFC 7517 EC P-256, kid = base64url SHA-256 of SPKI DER,
alg ES256, use sig). Types are defined locally to avoid a
handlers_eks → handlers_sts → handlers_eks import cycle; JSON wire
compat is the contract.
- LoadClusterOIDCPrivateKey is the recovery-path read for future
stages (reconciler restart, restore-snapshot tooling). Validates
PKCS8 parses to an ECDSA P-256 *PrivateKey and rejects anything else.
- ZeroizeClusterOIDCKey overwrites the encrypted blob with zeros of
the same length, then deletes. DeleteCluster calls this *first* so a
crash mid-teardown leaves no recoverable key material. Idempotent
on missing key — supports retry semantics.
Tests cover JWKS shape (RFC 7517 EC P-256 with 32-byte SEC1
coordinates), per-cluster key uniqueness, round-trip private-key
decrypt matches JWKS public, wrong-master-key fails, missing-key
ErrClusterNotFound mapping, zeroize idempotency, JWKS survives
zeroize (carries no secret material), padCoord left-pad correctness.
Plan: docs/development/feature/eks-6b-create-cluster.md
* feat(eks): cluster SG + NLB ensure/delete helpers
Stage 3 of Sprint 6b CreateCluster lifecycle. Adds the customer-account
SG provisioning + per-cluster NLB plumbing the CreateCluster body will
call between OIDC keypair (Stage 2) and K3s VM launch (Stage 4). Pure
interface-call helpers — no daemon, no KV, no NATS bus.
- EnsureClusterSGs creates (or returns) eks-cluster-{name}-control-plane-sg
and eks-cluster-{name}-nodegroup-sg in the customer VPC, tagged
spinifex:managed-by=eks + spinifex:eks-cluster=<name> + spinifex:eks-role.
Idempotent on group-name + vpc-id pair. DeleteClusterSGs is best-effort
with continue-on-error sweep.
- EnsureClusterNLB provisions the eks-<name> NLB (internal scheme), the
eks-<name>-cp target group (TCP, port 6443, target-type ip per eks-v1.md
Q13), and the TCP :443 forward listener. Returns ClusterNLB
{LoadBalancerArn, TargetGroupArn, ListenerArn, DNSName} so CreateCluster
can persist every ARN in ClusterMeta. Idempotent on cluster name;
resource-name length validated against the AWS 32-char cap so a too-long
cluster name fails with a clear error instead of a generic
InvalidParameterValue downstream.
- RegisterClusterTarget + DeregisterClusterTarget bind the K3s server VM
ENI IP to the TG on :6443. Stage 4 calls Register once the VM has its
ENI IP; DeleteCluster calls Deregister before VM termination.
- DeleteClusterNLB tears down NLB + TG. DeleteLoadBalancer already
cascades listener cleanup inside the ELBv2 impl. LB sweep error takes
precedence so DeleteCluster surfaces the more visible failure first
while the TG sweep still runs.
Narrow sgProvisioner + nlbProvisioner interfaces in-package give tests
hand-rolled recorder fakes; the production VPCService + ELBv2Service
satisfy them structurally so no adapter is needed at Stage 6 wire-up.
Tests cover fresh-creates with right names/tags/ports, idempotent reuse,
mixed-existence (control-plane exists, nodegroup created), name-too-long
rejection, empty-inputs rejection, missing-resource no-op on delete, and
first-error-surfaced sweep continuation on delete.
Plan: docs/development/feature/eks-6b-create-cluster.md
* feat(ec2): RunInstances honors pre-created NetworkInterfaceId
Closes the AWS-parity gap where RunInstances always auto-created a
primary ENI even when the caller specified
NetworkInterfaces[0].NetworkInterfaceId. The EKS Sprint 6b CreateCluster
launcher (Stage 4) needs to pre-create the K3s server VM's ENI so the
ENI can be tagged/owned distinctly from the launcher's instance; the
existing path silently created a second ENI and left the caller's
unattached.
Changes:
- ENICreator interface gains GetENI(accountID, eniID) → *ENIInfo. ENIInfo
is a translated struct (SubnetID, VpcID, PrivateIp, MAC, Status,
SecurityGroupIDs) so handlers/ec2/instance stays free of an import on
handlers/ec2/vpc.ENIRecord.
- daemon/vpc_adapter.go gains daemonENICreator.GetENI translating
VPCServiceImpl.GetENIRecord into ENIInfo.
- PrepareRunInstances inspects NetworkInterfaces[0].NetworkInterfaceId
after the existing subnet/SG lift block. If non-empty, the loop
dispatches to a new attachPreCreatedENI helper:
- Looks up the ENI under accountID.
- Rejects with InvalidNetworkInterface.InUse if Status == "in-use".
- Calls AttachENI to mark the ENI in-use and bind it to the new VM.
- Populates instance.ENIId / ENIMac and ec2.Instance network fields
(PrivateIp, SubnetId, VpcId, SecurityGroups, NetworkInterfaces[0]).
- Skips the auto-create + public-IP-auto-assign paths; the caller is
expected to manage public IP out-of-band.
- Auto-create path is left untouched for every other code path: callers
that pass SubnetId without a NetworkInterfaceId still get a fresh ENI
with the existing semantics.
Tests cover the four shapes: happy path (auto-create not called, attach
called once, instance populated), in-use ENI rejected with the canonical
AWS error code, lookup error surfaces verbatim, attach error surfaces
verbatim.
* feat(eks): K3s control-plane VM launcher with cloud-init user-data
LaunchK3sServerVM resolves the eks-server AMI by name, pre-creates the
customer-account control-plane ENI in the supplied subnet with the
control-plane SG, renders cloud-init user-data (first-boot env, OIDC
private key, K3s config.yaml with tls-san + service-account args), then
calls RunInstances with NetworkInterfaces[0].NetworkInterfaceId pointing
at the pre-created ENI. RunInstances failures roll back the ENI so the
caller does not leak a customer-account resource.
TerminateK3sServerVM tears the instance and ENI down for DeleteCluster;
missing identifiers are a no-op so retries stay safe.
ENI + VM both live in the customer account (deviation from plan §7 which
specified a SystemAccount-owned VM); cross-account ENI attach is deferred
to a follow-up bead.
* feat(eks): NATS bootstrap subscriber + cluster reconciler + leader lease
NATSBootstrap subscribes to the four single-shot subjects the K3s server VM
publishes (k3s-bootstrap-token, k3s-admin-kubeconfig, k3s-oidc-jwks, k3s-ca)
on eks.bus.{accountID}.{clusterName}.{kind}. Token and admin kubeconfig are
envelope-encrypted via handlers_iam.EncryptSecret and persisted to KV. The
published JWKS is cross-checked against the controller-generated keypair by
kid and rejected on mismatch. The CA lands on meta.CertificateAuthorityB64
via the new SetClusterCertificateAuthority CAS updater.
ClusterReconciler holds a leader lease on spinifex-eks-leader/{accountID}/
{clusterName} (60s TTL, 20s refresh) and drives:
- CREATING -> ACTIVE once the four bootstrap KV artifacts are present and
NLB /healthz responds 200.
- ACTIVE -> probe /healthz on the configured interval, warn on failure.
- DELETING / FAILED -> exit (DeleteCluster body owns teardown).
Loss of the leader lease (CAS conflict or different holderID) returns
ErrReconcilerLeaseLost so the caller can re-acquire from another node.
Tested with embedded JetStream + a stub HTTPDoer; race-clean.
* feat(eks): OIDC issuer URL builder + reconciler registry
ClusterOIDCIssuer renders the {gatewayBaseURL}/oidc/eks/{region}/{accountID}/
{clusterName} URL kube-apiserver advertises as service-account-issuer and
that STS / external IRSA validators dereference. Validates URL safety on the
path segments so a hostile cluster name cannot inject scheme/path fragments.
ReconcilerRegistry tracks per-(accountID, clusterName) reconciler goroutines
with idempotent Spawn (drop duplicate spawn calls), Stop (cancel one + wait
for release), and StopAll (graceful daemon shutdown). RunClusterReconciler
is the production SpawnReconcilerFn: constructs a ClusterReconciler,
acquires the leader lease, runs Run in a goroutine. Both helpers consumed
by the upcoming service_impl CreateCluster body.
* feat(eks): CreateCluster/DescribeCluster/ListClusters/DeleteCluster bodies
Wires the EKSServiceImpl orchestration deps (VPC SG/K3s/Subnet, NLB,
Instance launcher, AMI resolver, master key, gateway base URL, region,
holder ID, reconciler registry) and implements the four lifecycle
methods:
- CreateCluster: validate → CREATING meta → SGs → NLB → OIDC issuer +
keypair → K3s server VM (cloud-init carries OIDC private PEM) →
register ENI IP with NLB target group → spawn NATS bootstrap
subscriber + per-cluster reconciler via the registry.
- DescribeCluster: KV meta read → eks.Cluster shape, with
ErrClusterNotFound translated to ResourceNotFoundException at the
service boundary.
- ListClusters: KV key-prefix scan + sorted maxResults/nextToken
pagination.
- DeleteCluster: SetClusterStatus DELETING → zeroize OIDC key → stop
reconciler via registry → deregister NLB target + delete NLB →
terminate K3s VM → delete SGs → delete cluster KV prefix.
Daemon wiring:
- buildEKSServiceDeps loads MasterKey from BaseDir/config/master.key
best-effort, resolves the gateway base URL via the same precedence the
LB-agent block applies later, and passes VPCService + ELBv2Service +
ImageService directly while adapting InstanceServiceImpl via
daemonEKSInstanceLauncher (RunInstances passes through; Terminate-
Instances loops vmMgr.Get + StopOrTerminateInstance in-process).
- SubnetVPCResolver is satisfied by daemonEKSSubnetResolver wrapping
VPCService.GetSubnet.
- Startup spawns reconcilers for every persisted CREATING/ACTIVE cluster
via SpawnRegisteredReconcilers; shutdown calls eksService.Shutdown so
every per-cluster goroutine releases its lease before exit.
Test surface:
- service_impl_test: TestEKSServiceImpl_ClusterLifecycleShimMode covers
the four lifecycle methods when constructed via the back-compat shim
(CreateCluster/DeleteCluster → ServerInternal, DescribeCluster →
ResourceNotFound on empty bucket, ListClusters → empty list).
- daemon_handlers_eks_test: drop the four lifecycle subjects from the
NotImplemented routing loop; handler-side coverage now lives in
handlers/eks.
- awserrors: add ResourceNotFound (404) for the DescribeCluster path.
* fix(eks): load master.key from config dir not service data dir
eks_deps read master.key from {BaseDir}/config/master.key, but the daemon
systemd unit sets SPINIFEX_BASE_DIR=/var/lib/spinifex/spinifex (a per-service
data dir). admin init writes master.key to the shared config dir, so the
daemon looked in a path that only resolved when a {BaseDir}/config symlink
existed — awsgw has one, the daemon's nested data dir does not. Result:
MasterKey=nil, depsReadyForOrchestration() false, CreateCluster/DeleteCluster
collapse to ServerInternal.
master.key is a config artifact written next to spinifex.toml. Read it from
filepath.Dir(d.configPath), matching how the daemon already resolves
predastore.toml and TLS certs. No symlink or provisioning change needed.
* fix(eks): register + resolve eks-server AMI via tag, add import --ami-name
CreateCluster's K3s launch failed 'eks: AMI eks-server not found' on every
clean install. Two defects:
1. spx admin images import had no way to name a locally-built appliance AMI:
--name is a catalog lookup (rejects non-catalog values) and the AMI name
was hardcoded to ami-{distro}-{version}-{arch}. build-system-image.sh ran
'import --name $AMI_NAME' for eks-server/eks-agent/GPU images, which all
failed 'Image name not found in available images'.
2. The launcher resolved DescribeImages by name=='eks-server', a name the
pipeline could never produce.
Add --ami-name to override the registered AMI name on --file imports (fixes
eks-server, eks-agent, and GPU appliance imports). Resolve the EKS AMI by the
spinifex:managed-by=eks tag the pipeline already stamps, newest-wins on
multiple matches. Tag-based resolution survives the planned server+agent →
single EKS AMI unify untouched (role chosen per-instance at launch).
build-system-image.sh now passes --ami-name; Makefile gains
import-eks-server-image (IMPORT=1) and dev-install.sh imports the AMI when
DEV_INSTALL_EKS=1.
* fix(eks): give K3s server VM NATS token + CA so bootstrap can publish
The K3s control-plane VM was launched with NATSURL=ConnectedUrl() (loopback,
unreachable from the VM) and no auth material, while spinifex NATS requires a
shared token over TLS. The VM could not connect to NATS, so it never published
its four one-shot bootstrap messages and the cluster stayed in CREATING.
Hand the VM the daemon's shared NATS token + CA PEM and a VM-reachable NATS URL
(mirrors the ELBv2 LB-agent shared-credential pattern; spinifex has no nkeys
hierarchy to scope per-principal creds against).
- K3sServerInput: drop dead NATSCredsContent; add NATSToken + NATSCACert,
required by validateK3sServerInput. user-data writes SPINIFEX_NATS_TOKEN,
SPINIFEX_NATS_CA + the CA file; first-boot.env tightened to 0600.
- EKSServiceDeps + CreateCluster: pass NATSURL/NATSToken/NATSCACert.
- buildEKSServiceDeps: read CA from config.NATS.CACert; extract
resolveGatewayHost(); add resolveNATSURL() (same reachable host, NATS port).
- k3s-first-boot.sh: build nats CLI args with --token + --tlsca.
* fix(eks): retry transient bootstrap persists, fail cluster on permanent error
The NATS bootstrap subscriber tore down on the first persist error and the
cluster sat in CREATING forever. Core-NATS delivers a publication once, so a
transient KV blip during persist was unrecoverable and a malformed payload
(bad JWKS kid, non-base64 CA, empty envelope) silently stranded the cluster.
- persistWithRetry rides out transient persist failures in-handler (3 attempts,
200ms backoff) instead of unsubscribing and waiting for a re-publish that
never comes.
- errBootstrapPermanent classifies validation failures (malformed envelope,
empty fields, JWKS kid mismatch, non-base64 CA) as non-retryable so they
return immediately.
- spawnBootstrap marks the cluster FAILED (with reason) when Run exits with a
non-context error, so DescribeCluster surfaces the cause and DeleteCluster
can reclaim resources.
- MarkClusterFailed transitions to FAILED+StatusReason only from CREATING, so a
late bootstrap error cannot clobber a concurrent delete or healthy cluster.
- casUpdateMeta extracts the revision-checked RMW loop shared by the meta
setters.
* fix(eks): resume NATS bootstrap for CREATING clusters on daemon restart
SpawnRegisteredReconcilers re-spawned only the reconciler on boot, never the
bootstrap subscriber. A daemon restart while a cluster was CREATING (K3s VM
still booting) lost the subscriptions; the VM published its four one-shot
core-NATS messages to nobody and the cluster hung in CREATING forever.
- BootstrapPendingKinds reports which artifacts (token, kubeconfig, CA) are
still missing from KV. JWKS is excluded: it persists no artifact and
re-waiting on a once-published subject would deadlock — its cross-check is
best-effort across a restart.
- RunForKinds subscribes to a subject subset (nil = all four); Run delegates to
it. subjectHandlers maps each kind to its handler and rejects unknown kinds.
- SpawnRegisteredReconcilers resumes bootstrap for CREATING clusters, waiting
only on the missing artifacts, so a mid-CREATING restart still drives the
cluster to ACTIVE.
* fix(eks): DeleteCluster must not wipe KV or report success on teardown failure
DeleteCluster ran zeroize, NLB teardown, and VM termination as warn-and-continue
then unconditionally swept the per-cluster KV prefix and returned success. A
failed NLB or VM teardown leaked billable resources with no owning record (the
meta holding their ARNs/IDs was erased) and told the operator the cluster was
gone. Zeroize — a stated security guarantee of no recoverable key material —
had its failure ignored too.
- Zeroize, NLB delete, and VM terminate are now blocking: their failures
accumulate (errors.Join) and abort the call before the KV sweep, leaving the
cluster DELETING and returning the error so a retry can still reach the ARNs.
- KV prefix sweep runs only after NLB + VM teardown confirm.
- SG cleanup stays best-effort (plan step 5) — a leaked SG strands no owning
record — and target deregister stays best-effort since DeleteClusterNLB tears
down the whole NLB + target group.
* fix(eks): persist NLB + control-plane ARNs mid-CreateCluster so failures don't leak
CreateCluster set meta.NLBArn / target-group / instance / ENI in memory and
persisted them only in the final PutClusterMeta, after LaunchK3sServerVM. Any
failure between EnsureClusterNLB and that persist left the NLB + target group +
listener + backing LB VM created but unrecorded; markFailed did no rollback and
DeleteCluster keys teardown off the persisted ARNs, so the resources leaked.
- Persist meta immediately after EnsureClusterNLB (records NLB/TG ARNs) and
again after LaunchK3sServerVM (records instance + ENI), before the next
fallible step.
- A failed create now leaves a FAILED meta carrying the resource references, so
the DeleteCluster teardown path (165.9) reclaims every NLB/TG/listener/VM.
- Tests: NLB-arn-persisted-before-later-failure, failed-create-then-delete
reclaims NLB, and a CreateCluster happy path. Shared eksServiceFixture
extracted from the delete-cluster fixture.
* fix(sts): parse path-based EKS OIDC issuer so IRSA accepts 6b cluster tokens
ParseEKSIssuerURL required an `oidc.eks.` host prefix and an exactly-2-segment
path (AWS hosted-EKS shape), but ClusterOIDCIssuer emits — and awsgw serves —
https://{gateway-host}/oidc/eks/{region}/{accountID}/{clusterName}. Every 6b
cluster's iss claim was rejected with "issuer host must start with oidc.eks",
so AssumeRoleWithWebIdentity would fail all IRSA tokens once 6e serves them.
Reconcile on the path-based shape, which is what is actually reachable on
bare-metal/on-prem (no oidc.eks.* vhost or DNS exists). Host trust comes from
the IAM OIDC-provider registration (the full issuer string is the registry key)
and the JWKS signature check, not a host pattern — so the parser drops the host
prefix rule and instead pins accountID/clusterName at fixed positions in a
strict 5-segment /oidc/eks/{region}/{accountID}/{clusterName} path. A crafted
iss with extra or missing segments still fails closed.
Adds a cross-component round-trip test asserting a ClusterOIDCIssuer-built iss
parses back to the same (accountID, clusterName).
* fix(eks): reclaim FAILED clusters on retry + cluster-scoped exists/not-found errors
A failed CreateCluster left a FAILED ClusterMeta that poisoned retries: the
preflight returned ErrorELBv2TargetGroupInUse ("The target group is currently
in use...") for a cluster-exists condition, and because that maps to a
retryable code the SDK's auto-retry surfaced ResourceInUseException instead of
the original failure. FAILED clusters were also a dead state — visible to
neither a clean recreate nor a clear lifecycle.
- Add EKS-specific ResourceInUseException / ResourceNotFoundException codes with
cluster-scoped messages; CreateCluster's exists check and DescribeCluster /
DeleteCluster not-found now use them instead of the ELBv2 / EC2 codes.
- CreateCluster reclaims a FAILED cluster: it purges the prior attempt's
recorded resources and clears KV before recreating, so a retry (including the
SDK auto-retry) is idempotent rather than blocked. Teardown failure surfaces
rather than recreating on top of orphans.
- Extract purgeClusterInfra, shared by DeleteCluster and the reclaim path
(blocking zeroize/NLB/VM, best-effort SG, KV sweep only after teardown
confirms).
- FAILED clusters remain observable via Describe (status=FAILED) and List — no
state where create blocks but describe/list show nothing.
* fix(eks): fail CREATING clusters that exceed create timeout
A per-cluster reconciler that never observes a ready control plane (bootstrap
artifacts missing or healthz unreachable) previously stayed CREATING forever.
Add a configurable create timeout (default 15m): once meta.CreatedAt is older
than the deadline and the cluster is still not ready, the reconciler marks it
FAILED with a reason, exiting the loop. Within the deadline it stays CREATING.
* fix(eks): surface ACTIVE cluster health in describe-cluster
The reconciler only slog.Warn'd a failing /healthz probe for an ACTIVE
cluster, so describe-cluster kept reporting a dead control plane as healthy.
Add HealthIssue + LastHealthProbe to ClusterMeta, write them from the ACTIVE
reconcile branch (recording the failure reason, clearing on recovery), and map
a non-empty HealthIssue to a ClusterHealth ClusterUnreachable issue in
describe-cluster.
* test(eks): add plan-mandated CreateCluster/DeleteCluster service cases
service_impl_test only covered shim mode. Add the four cases the plan's Testing
section requires: CONFIG_MAP auth mode rejected (and API accepted), missing
subnetIds rejected, DescribeCluster 404 with full deps wired (past the shim
short-circuit), and the DeleteCluster zeroize-before-teardown ordering proven
by forcing a teardown failure and asserting the OIDC key is already wiped.
* refactor(eks): return OIDC private-key PEM from generator, drop re-read
CreateCluster discarded GenerateClusterOIDCKeypair's return then did a second
KV get + AES-GCM decrypt via loadOIDCPrivateKeyPEM to re-derive the same PEM the
generator already had in hand. Return the plaintext PEM (alongside the JWKS)
from the generator and use it directly; remove loadOIDCPrivateKeyPEM and the now
-unused crypto/x509 + encoding/pem imports in service_impl.
* fix(eks): make CreateCluster/DeleteCluster failures diagnosable
Unmet orchestration deps and a missing eks-server AMI both collapsed to a bare
ServerInternal with no request-time log, leaving the client a 'contact AWS
re:Post' message and zero cause. Enumerate the specific missing deps and log
them at ERROR, returning ServiceUnavailable (an operator/config fault, not an
unrecoverable internal one). Add an ErrEKSServerAMINotFound sentinel so a
missing control-plane AMI is logged and surfaced as ServiceUnavailable too.
* fix(eks): serialize REST-JSON responses via jsonutil so the AWS SDK can parse them
WriteJSONResponse marshaled aws-sdk-go *Output structs with encoding/json,
which ignores their locationName tags and emits Go PascalCase keys. EKS
clients parse restjson on the lowercase locationName, so every field of
list/describe/create/delete responses was silently dropped (empty endpoint,
null identity.oidc.issuer). Marshal via jsonutil.BuildJSON — the same
marshaler the SDK uses for restjson bodies — which honors locationName.
Adds wire-shape tests asserting lowercase keys present and PascalCase absent.
* feat(eks): launch K3s server VM via boot-agnostic system-instance path
The EKS K3s control-plane VM launched through the plain tenant RunInstances
path, so it had only its VPC ENI and no management-bridge NIC -- no route to
the daemon's NATS endpoint. It never published its bootstrap subjects and the
cluster stayed CREATING.
Generalize LaunchSystemInstance to a boot-agnostic contract supporting both
system-instance boot styles:
- BootDirect: direct-boot microVM (fw_cfg blobs) -- ELBv2 LB agent
- BootAMI: AMI boot + cloud-init seed (q35) -- EKS K3s server VM
The launch contract moves to a neutral handlers/sysinstance package so EKS can
launch system VMs without an eks->elbv2 dependency; handlers/elbv2 re-exports
the types as aliases. The BootAMI branch mirrors the daemon's
Prepare -> Insert -> Launch split and allocates the mgmt NIC on the VM record
between Insert and Launch, so the cloud-init network-config renders a static
mgmt0 interface. The EKS NATSURL is now sourced from the mgmt-bridge IP (the
on-link address the VM's mgmt NIC can reach), falling back to the gateway-host
resolution when no mgmt bridge exists.
Verified: K3s VM now boots from the eks-server AMI under q35 with a mgmt0 NIC
(10.15.8.x), reachable from the host over br-mgmt, with NATS on-link at the
bridge IP. No AMI rebuild required.
* fix(eks): make DeleteCluster K3s teardown idempotent so it can't wedge
TerminateK3sServerVM treated every DeleteNetworkInterface error -- and every
TerminateSystemInstance error -- as blocking. Because instance terminate is
async, the immediate ENI delete races it: the first attempt fails
InvalidNetworkInterface.InUse, and once the instance-terminate cascade releases
the ENI every retry fails InvalidNetworkInterfaceID.NotFound. Both joined into
purgeClusterInfra's teardownErrs gate, which short-circuits before the SG sweep
and KV prefix delete -- so once the ENI was gone the cluster was stuck DELETING
permanently, leaking its control-plane + nodegroup SGs and KV meta.
Classify the teardown errors instead of blanket-propagating:
- ENI InvalidNetworkInterfaceID.NotFound / InvalidNetworkInterface.NotFound
-> idempotent success (the cascade or a prior retry already deleted it);
must not block the downstream SG + KV sweep.
- ENI InvalidNetworkInterface.InUse (VM still terminating) and any other
error -> retryable; surfaced so the cluster stays DELETING and the
reconciler retries once the instance releases the ENI.
- Instance already gone -> idempotent. TerminateSystemInstance now returns a
sysinstance.ErrSystemInstanceNotFound sentinel that the EKS path tolerates
via errors.Is, so a retried delete after the VM drained completes.
Add awserrors.IsErrorCode(err, code) as the shared delete-error classifier
(substring match through %w wrapping) and route the lone ad-hoc strings.Contains
guard in daemon/vm_adapters.go through it.
Verified: delete-cluster on three clusters left wedged DELETING / FAILED (ENI +
VM already gone) all complete -- clusters erased, SGs + ENIs reclaimed, no leak.
* fix(eks): gate ACTIVE on verified JWKS cross-check, not pre-seeded key
The controller pre-seeds OIDCJWKSKey at create time, so its presence
proved nothing about the running cluster's actual signing key. A cluster
could reach ACTIVE — and start signing IRSA tokens — before the K3s VM's
published JWKS was ever cross-checked against the generated keypair.
Add an OIDCJWKSVerifiedKey marker written by persistJWKS only after
assertJWKSMatch passes. The reconciler's ACTIVE gate and
BootstrapPendingKinds now key off the marker, not the pre-seeded JWKS.
assertJWKSMatch is map-based and also rejects kty mismatch.
* fix(eks): collapse duplicated gateway-host switch into resolveGatewayHost
startCluster reimplemented the 5-case gateway-host precedence inline,
duplicating resolveGatewayHost (used by the OIDC issuer and EKS NATS URL).
If one drifted, the OIDC issuer host embedded in cluster tokens would
diverge from the host LB VMs use to reach the daemon -> IRSA iss mismatch
and cluster-wide token rejection.
startCluster now calls resolveGatewayHost and derives the multi-node
mgmt host route (mgmtRouteVia) from the resolved host. resolveGatewayHost
carries the canonical case enumeration; a table test pins all five
branches plus the case-1 skip guards and the no-host fallthrough.
* fix(eks): make eks-server VM boot diagnosable + fix first-boot publisher crash
Three issues found while diagnosing why K3s clusters never leave CREATING:
1. setup.sh: the stock Alpine cloud image lists `console=tty0` LAST in
default_kernel_opts, so Linux binds /dev/console to the framebuffer and the
host-side serial capture sees only kernel dmesg — OpenRC, cloud-init, and
k3s-first-boot output were invisible. Reorder so console=ttyS0 is last.
2. k3s-first-boot.initd: command_background was "no" while output_log/error_log
were set; start-stop-daemon rejects --stdout/--stderr without --background
("Failed to start k3s-first-boot"), so the bootstrap publisher never ran and
the cluster wedged in CREATING. Background it (the publisher waits up to 5min
on K3s /healthz and must not block the runlevel anyway) and route its output
to the serial console, which the orchestrator captures (the VM has no login).
3. k3s-first-boot.sh: on the /healthz timeout, dump the tail of /var/log/k3s.log
to the console so the apiserver's own failure is visible host-side.
* fix(eks): seed K3s apiserver a public OIDC key, not the private key
buildK3sUserData pointed both kube-apiserver service-account args at the same
private-key file. --service-account-key-file requires a PUBLIC key — k8s
ParsePublicKeysPEM rejects a private-key PEM with "data does not contain any
valid RSA or ECDSA public keys" and the apiserver crash-loops, so K3s never
reaches /healthz, first-boot never publishes, and the cluster wedges in
CREATING.
Add PublicKeyPEMFromPrivate (PKIX public PEM from the PKCS#8 private key) and
seed it to a separate /etc/rancher/k3s/oidc-signing-key.pub.pem. Point
service-account-key-file at the public file; keep service-account-signing-key-file
on the private file. Runtime-verified: the apiserver crash is gone and K3s now
starts and schedules system pods.
* feat(eks): egress-only SNAT + DNS for K3s control-plane VM
The K3s server VM (a hidden system instance) could not pull system-pod
images: it had no internet egress and no working resolver, so
coredns/traefik/metrics-server never started and /healthz timed out.
Egress: give the single control-plane VM egress-only internet, confined
to its /32, with no inbound exposure and no customer-visible resource.
- policy/route.go: SystemInstanceEgressPriority (1200, above the drop
gate) + AddSystemInstanceEgress/Delete — a reroute scoped to
ip4.src == <vmIP>/32 so peers in a shared subnet are unaffected.
- policy/nat.go: AddSystemInstanceSNAT/Delete — a plain snat (not
dnat_and_snat, so no inbound path), idempotent on its pool external IP.
- external/igw.go: L5 EnsureSystemInstanceEgress/Remove resolves the
gateway nexthop and attaches the reroute + snat (mirrors the NAT-GW
egress path; ADR-0006 S1/S4/S5 preserved).
- subscribers: vpc.add/delete-system-egress topics + handlers.
- handlers/eks: allocate a hidden (ManagedBy=eks) pool address on
CreateCluster and publish add; release + publish delete on teardown.
EIP dep wired through EKSServiceDeps + the daemon.
DNS: the eks-server AMI is Alpine/dhcpcd and /etc/resolv.conf is a
dangling symlink, so DHCP-supplied resolvers are never persisted. Write
a real /etc/resolv.conf from the K3s VM cloud-config via bootcmd (not
write_files — a write_files entry follows the dead symlink, fails, and
aborts the whole block, dropping first-boot.env + the k3s config).
* feat: EKS 6b single-node SQLite pivot + bootstrap-envelope fixes
Switch the K3s server VM from embedded etcd to embedded SQLite (kine)
for the single-node v1, so CreateCluster reaches a healthy control plane.
etcd's per-commit fsync stalls past the apiserver deadline on viperblock's
deferred-durability block path; SQLite tolerates it.
- k3s server: omit cluster-init (selects SQLite/kine), add anonymous-auth=true
so the reconciler's anonymous /healthz NLB probe returns 200.
- first-boot readiness gate: anonymous /healthz (401 under CIS anonymous-auth
=false) -> authenticated 'kubectl get --raw /readyz'.
- first-boot publish: emit a JSON BootstrapEnvelope for all four subjects
(token, admin-kubeconfig, oidc-jwks, ca); jwks and ca were absent before.
- nats pub: --stdin -> --force-stdin (nats CLI 0.4.0).
- manifest: add jq (builds the bootstrap-message JSON envelopes).
* feat: EKS reconciler probes control-plane mgmt IP until DNS lands
The host-side cluster reconciler cannot resolve or route to the VPC-internal
NLB DNS endpoint (no authoritative DNS / Eclipso yet), so CreateCluster timed
out in CREATING and was marked FAILED even though the control plane was healthy.
Probe the control-plane VM's br-mgmt NIC address directly — the one apiserver
endpoint reachable from the daemon. Capture the mgmt IP from the launch result
(SystemInstanceOutput.MgmtIP -> K3sServerOutput.MgmtIP -> ClusterMeta.
ControlPlaneMgmtIP) and build the reconciler health URL as
https://<mgmtIP>:6443/healthz. The probe client already sets InsecureSkipVerify,
so the mgmt IP need not be in the apiserver cert SAN.
Workaround until authoritative DNS + a host-reachable NLB front-end land, at
which point spawnReconciler reverts to the NLB endpoint.
|
||
|
Julian Sommer
|
9508aaacce | chore: bump go 1.26.4 | ||
|
Josh Siviour
|
8883984f3f |
feat(eks): eks-server + eks-agent AMI manifests (#273)
* feat(eks): eks-server + eks-agent AMI manifests + builder INSTALL_FILES
Manifest-driven AMI build for the two EKS image variants (eks-v1.md Q12).
Lifted forward from cs-eks-6b so the K3s boot path can be smoke-tested in
isolation before CreateCluster orchestration lands.
Builder:
- build-system-image.sh gains optional INSTALL_FILES (src:dst pairs,
mode 0644, parent dirs auto-created). Symmetric with INSTALL_BINARIES.
- ENABLE_SERVICES moves after INSTALL_FILES + SETUP_SCRIPT so init scripts
the manifest references are on disk before rc-update enables them.
eks-server image (Alpine 3.21.7, q35, 4G):
- K3s v1.32.5+k3s1 (downloaded at bake time, SHA256 verified against the
upstream sha256sum-amd64.txt trust anchor).
- nats-cli v0.4.0 (not in Alpine main/community — pulled from upstream
release zip; unzip installed + purged in same setup step).
- OpenRC init scripts: k3s, eks-token-webhook, k3s-first-boot.
- Cron periodics under /etc/periodic/{15min,daily}/ for state-report +
etcd-snapshot.
- k3s-first-boot publishes node-token + admin kubeconfig over NATS on
first successful K3s healthz, then self-disables (sentinel + rc-update
del).
- config.yaml.skel without webhook-token-auth — wiring it before the real
webhook lands (cs-eks-6c) would block anonymous probes against /healthz.
Orchestrator drops the live config + restarts k3s.
eks-agent image (Alpine 3.21.7, q35, 2G):
- Same pinned K3s release for server/agent lock-step.
- k3s-agent OpenRC service refuses to start without K3S_URL+K3S_TOKEN —
fail-closed pre-orchestration.
eks-token-webhook stub (cmd/eks-token-webhook/main.go):
- 503 + Retry-After:30 on every path. Statically linked. Lets the AMI
build succeed and kube-apiserver boot cleanly. Replaced wholesale by
cs-eks-6c.
Init system divergence from spec wording: Alpine ships OpenRC, not
systemd. Unit files use .initd extensions and cron periodics instead of
.service / .timer. Bead-level intent (auto-enable on boot, periodic
execution) preserved.
Smoke-tested:
- eks-server: builds 300M qcow2; qemu q35 boot reaches K3s apiserver on
6443 within ~120s; HTTPS probes return valid k8s Status JSON (the 401
is K3s v1.32 default RBAC behaviour against anonymous, not a regression).
- eks-agent: builds 280M qcow2; qemu boot mounts root cleanly.
* feat(eks): make targets for eks-server + eks-agent AMI builds
- build-system-image gains subdir-manifest fallback: tries
scripts/images/$(IMAGE).conf first, then scripts/images/$(IMAGE)/manifest.conf
so the new EKS layout works alongside the existing flat lb manifest.
- build-eks-server-image / build-eks-agent-image — explicit convenience
targets that delegate to the generic one.
|
||
|
Julian Sommer
|
10728391af | chore: revert test-cover Makefile | ||
|
Josh Siviour
|
fd3dc6b680 |
feat(network): ADR-0006 layer redesign + IPsec/OVN hardening (#255)
* refactor(vpcd): remove macvlan bridge mode
Macvlan was a single-NIC SSH-safe hack that predated veth mode and was
never selected by any active config path. Deletion is Phase 0 item 1 of
the network layer redesign (mulga-siv-125.1).
Removed:
- BridgeModeMacvlan const + setMacvlanMAC + ifaceIsMacvlan probe
- Macvlan MAC alignment block in launchService (only fired on dead path)
- Macvlan branch in detectBridgeMode + matching tests
- Macvlan duplicates of IGW/AddNAT centralized-NAT tests (veth versions
already cover the same path)
- --macvlan flag + macvlan case branch in setup-ovn.sh
Refactored:
- useCentralizedNAT() now == BridgeModeVeth (was != BridgeModeDirect);
verifyBridgeMode already rejects empty/unknown at startup
- Three IGW-pool tests now explicitly WithBridgeMode(BridgeModeVeth)
(previously relied on empty-mode defaulting to centralized)
Kept intentionally:
- Deprecation notes in docs/compute/vpc-networking/README.md
- Legacy macvlan-interface cleanup in reset-dev-env.sh + ansible
teardown role (migration for operator systems with stale spx-ext-*
interfaces from pre-veth installs)
* feat(vpcd): resolve external CIDR at startup with bounded retry
Block service start until the WAN bridge has an IPv4 address, with a 30s
retry window. Phase 0 item 2 of the network layer redesign
(mulga-siv-125.1). Guards the boot race where vpcd starts before
systemd-networkd finishes DHCP on br-wan, or before netplan applies a
static config.
Skipped when ExternalMode is empty (overlay-only deployments).
Forward-compatible with ADR-0006: the new resolveExternalCIDR /
externalCIDRFromBridge helpers become the backing implementation of
HostWiring.ExternalCIDR() once the network/host package lands in Phase 1.
Until then the resolved value is only used to fail-start on missing
uplink.
* fix(vpcd): cover external CIDR startup paths
Extract launchService's CIDR-resolve block to ensureExternalCIDRReady
helper so it's unit-testable, and add direct tests for
externalCIDRFromBridge (loopback + unknown-interface) to exercise the
original literal body. Closes the diff-coverage gap on Phase 0 commit
15b564d which left these paths unreachable from unit tests.
* refactor(network/ovn): extract L1 OVN client to network/ovn package
Move OVNClient interface, LiveOVNClient, ACLSpec, ErrNATNotFound and
namedUUID helper from services/vpcd to a new spinifex/network/ovn
package. The mock relocates to spinifex/network/ovn/mock as a
sub-package. Storage fields on the mock become exported so vpcd tests
can continue to seed/inspect state across the new package boundary.
services/vpcd retains thin type-alias and var-alias shims so existing
callers compile unchanged; Phase 2 removes those shims as vpcd is torn
down.
Adds -coverpkg=./spinifex/... to test-cover so cross-package test
exercise of mock methods continues to count toward coverage now that
the mock lives outside vpcd.
First sub-step of Phase 1 of docs/development/feature/spinifex-network-redesign.md
(bead mulga-siv-125.2). Pure refactor; no functional change. All
existing tests pass; preflight green.
* feat(network/topology): TopologyManager interface + vpcd adapter
Add spinifex/network/topology with Manager interface, VPC/Subnet/Port
specs, and OVN object naming helpers covering the L2 stable contract
(§7 of the redesign plan). Phase 1 keeps existing in-tree OVN names
(rtr-, ext-port-, sg_) and notes the §7.3 targets for a later
reconciliation migration.
TopologyHandler in services/vpcd grows EnsureVPC / DeleteVPC /
EnsureSubnet / DeleteSubnet / EnsurePort / DeletePort /
SetPortSecurityGroups methods that mirror the corresponding NATS
handlers' OVN ops with Spec inputs instead of nats.Msg envelopes,
satisfying topology.Manager via a compile-time check. Existing handlers
are unchanged; the duplication is short-lived (Phase 2 collapses them).
Smoke tests in topology_manager_test.go cover the idempotent create
path, delete cascade, and declarative SG membership move. Deliverable:
TopologyManager.EnsureVPC/Subnet/Port callable; all existing tests
green.
Second sub-step of Phase 1 of docs/development/feature/spinifex-network-redesign.md
(bead mulga-siv-125.2).
* feat(network/host): L0 HostWiring interface + physical/veth impls
Phase 1 deliverable for mulga-siv-125.2. Introduces network/host (L0 of
ADR-0006): UplinkMode enum, Wiring interface, and Physical/Veth
implementations with injectable Runner + InterfaceReader for testability.
Not yet wired into daemon/vpcd — Phase 2 replaces daemon.SetupComputeNode
and vpcd's resolveExternalCIDR with calls through this package.
* feat(network/policy): L3 SecurityGroup/NAT/Route managers
Introduce network/policy as the data-plane policy layer (ADR-0006 L3).
Three managers, all backed by network/ovn:
- SecurityGroupManager: clear+add ACL replacement on an existing port
group; port group lifecycle stays with L2 (topology.Manager).
- NATManager: bound to one NATMode at construction (derived from
host.UplinkMode). Distributed sets logical_port/external_mac on EIP
dnat_and_snat rules; centralised leaves them unset. Per-EIP, NAT GW,
and IGW-default SNAT entrypoints; all deletes idempotent.
- RouteManager: AddStaticRoute is read-then-decide so retries no longer
duplicate rows (closing the long-standing non-idempotency bug in
vpcd/topology.go's IGW default-route path).
ACL priority constants and infrastructure ACL builders move from
vpcd/{security,acl}.go into policy/acl.go with their semantics preserved
(default-deny 900/800 logged, DHCP-allow 1050, tenant 1000). No vpcd
wiring changes here — additive only; the reconciler (bead .3.2) and
network/external (bead .3.4) will consume these managers.
bead: mulga-siv-125.3.1
* feat(network/external): L5 IGW/EIP/NATGW managers
Pure additive — new package, no topology.Manager changes, no rewiring of
existing vpcd handlers. IGWManager builds the external switch + localnet +
gateway LRP + default route + chassis HA, with a flows barrier callers can
inject (production: ovn-nbctl --wait=hv sync). EIP/NATGW are thin L5
wrappers over policy.NATManager. GatewayIPAllocator interface lets the
DHCP-backed allocator stay in vpcd until the DHCP-mgr removal bead lands;
LinkLocalAllocator + StaticRangeAllocator ship here.
* feat(network/reconcile): L6 intent-actual reconciler replaces 5-pass startup
Build spinifex/spinifex/network/reconcile/ package per Phase 2.2 of the
network layer redesign. Reads desired state from NATS KV filtered by
vpc.AZ (with legacy empty-AZ matches-all rule), scans actual state from
OVN NB DB, diffs and applies with VPC → Subnet → Port → SG → IGW →
EIP/NATGW topological ordering.
Atomic port-group join via CreateLogicalSwitchPortInGroups closes the
racy gap the legacy scanENIPortMembership pass used to revive 30s later.
A 5-minute drift goroutine (leader-gated via JetStream KV CAS) replaces
the old 30s ReconcileSGsLoop.
Adds AZ field to VPCRecord stamped at create time. Empty AZ on pre-Phase
2.2 records matches every local AZ, so no migration pass is required.
Replaces and removes the 5-pass startup sequence in services/vpcd:
- Reconcile + ReconcileFromKV
- ReconcileSGsOnce + ReconcileSGsLoop
- RetrofitAllExternalLocalnetOptions
- RetrofitAllGatewayPortNetworks
IGW fresh-create continues to flow through the legacy NATS handler path
(handleIGWAttach) so the dhcpManager wiring stays intact until Phase
2.3; the reconciler only rebinds gateway-chassis on existing IGW
topology.
Closes mulga-siv-125.3.2.
* refactor(network/topology): promote live Manager impl to network/topology
Move the topology.Manager implementation out of services/vpcd/topology_manager.go
into network/topology/manager_live.go as a standalone liveManager constructed
via NewLiveManager(ovn.Client, opts...). Inputs that varied per-handler
(DNS server resolution from the external pool) are now passed as functional
options (WithDNSServer).
TopologyHandler still satisfies topology.Manager but its methods delegate
to a cached liveManager. The shim stays until the rest of mulga-siv-129
routes NATS subscribers through topology.Manager directly.
Also exports SubnetGatewayCIDR + FormatDNSServerList from network/topology
so the reconciler in network/reconcile can share helpers with the live
manager (audit pass to follow per plan §6).
Test cases ported one-for-one from services/vpcd/topology_manager_test.go
to network/topology/manager_live_test.go; the vpcd-side test file is
deleted. New WithDNSServer test asserts the option propagates into
DHCPOptions rows.
Refs mulga-siv-129 (Phase 2.6 vpcd subscriber migration, Slice 1 of N).
* refactor(vpcd): collapse SG subscribers onto network/{topology,policy} managers
Phase 2.6 / mulga-siv-129 slice 2. Rewrites the vpc.create-sg /
vpc.update-sg / vpc.delete-sg NATS subscribers in services/vpcd as
thin wrappers over topology.Manager (port group lifecycle) and
policy.SecurityGroupManager (ACL programming). Deletes the ~1000
lines of duplicated ACL builder and provisioning logic — its
authoritative copy lives in network/policy.
Surface additions:
- ovn.ErrPortGroupNotFound sentinel; mock + live GetPortGroup wrap
not-found via fmt.Errorf("%w: ...") so callers can use errors.Is.
- topology.Manager grows EnsureSGPortGroup / DeleteSGPortGroup
(resolves the apply.go TODO from §2.1 of the redesign plan).
liveManager implements them with GetPortGroup-then-Create /
GetPortGroup-then-Clear+Delete idempotency.
Behaviour delta: the old provisionSG rolled back the OVN port group
on AddACLs failure ("all-or-nothing"). The new path lets the port
group survive and relies on network/reconcile to retry EnsureSG on
its next sweep. The all-or-nothing fail-fast test cases are dropped;
ACL emission semantics are covered by network/policy/sg_test.go.
* refactor(vpcd): migrate VPC/Subnet/ENI subscribers to topology.Manager
Phase 2.6 / mulga-siv-129 slice 3. Rewrites vpc.create / vpc.delete /
vpc.create-subnet / vpc.delete-subnet / vpc.create-port /
vpc.delete-port / vpc.update-port-sgs NATS subscribers as thin
wrappers (≤30 lines each) over topology.Manager. Subscriber bodies
now: parse event → translate to spec → delegate to manager.
Deletes:
- vpcd.subnetGateway (and helpers_test.go + topology_test.go's
TestSubnetGateway block); parity coverage lives in
network/topology.TestSubnetGatewayCIDR.
- vpcd.reconcilePortSGs (the live manager already exposes the same
diff-then-transact via reconcilePortSGs on the L2 side).
- vpcd.TopologyHandler.dnsServer; lmDNSServer (passed via
topology.WithDNSServer to the live manager) is the live path.
Behaviour delta: handlers now strict-parse PrivateIpAddress /
MacAddress / CidrBlock at the NATS boundary and reject malformed
payloads instead of degrading to "no DHCP options". The reconciler
guarantees that field validity is upheld upstream of the publish.
* refactor(network/reconcile): drive SG port groups via topology.Manager
applySGs now calls topology.Manager.EnsureSGPortGroup /
DeleteSGPortGroupByName instead of reaching directly into the OVN client.
Reconcile.Config gains a Topology field (required); the production caller
in services/vpcd passes the TopologyHandler shim, the reconcile package
tests construct a fresh topology.NewLiveManager bound to the mock OVN
client.
DeleteSGPortGroupByName is added to the topology.Manager interface for the
reconciler's orphan-removal path, which iterates raw OVN port-group names
without a groupID round-trip. The existing DeleteSGPortGroup(groupID)
delegates to it.
Resolves the TODO at apply.go:137 carried over from slice 2 of
mulga-siv-129.
* feat(network/policy): add FlowsBarrier option to NATManager
NATManager.AddEIP needs to block on `ovn-nbctl --wait=hv sync` after
writing the dnat_and_snat row so the NATS reply only returns once every
chassis has the rewrite flow. The legacy vpc.add-nat handler does this at
the tail of handleAddNAT; the manager has lacked it since slice 2.1.
NewNATManager grows a functional-options tail (Option / WithFlowsBarrier).
Defaults to a no-op for tests; production wiring in services/vpcd passes
waitForFlowsHV. AddEIP now invokes the barrier after AddNAT, logging at
warn level on failure to match the legacy handler's _ = waitForFlowsHV()
swallowing semantics.
Pre-work for slice 4 of mulga-siv-129 — without the barrier the NAT EIP
subscriber migration would lose the post-write flow-install gate.
* refactor(vpcd): migrate NAT GW subscribers to policy.NATManager
handleAddNATGateway / handleDeleteNATGateway now decode the NATS event
and delegate to policy.NATManager.{AddNATGateway,DeleteNATGateway}. The
manager carries identical OVN logic — same snat type, same ExternalIDs
(spinifex:vpc_id + spinifex:nat_gateway_id) — so existing
TestTopologyHandler_AddNATGateway / DeleteNATGateway suites stay green.
Lazy-constructed NATManager added on TopologyHandler (natmOnce). Mode is
derived from the bridge mode (veth → centralized, direct → distributed)
and the FlowsBarrier is bound to waitForFlowsHV for parity with the
legacy EIP path's tail barrier (used by the next slice, vpc.add-nat).
Slice 4 of mulga-siv-129, sub-step b.
* refactor(vpcd): migrate EIP NAT subscribers to policy.NATManager
handleAddNAT / handleDeleteNAT now decode the NATS event and delegate to
policy.NATManager.{AddEIP,DeleteEIP}. The behavioural contract is
preserved end-to-end:
- Idempotency-skip on a matching dnat_and_snat row (same VPC + LogicalIP,
plus MAC + LogicalPort under distributed NAT) moves into AddEIP so
duplicate vpc.add-nat publishes never tear down the rule the previous
invocation just installed (mulga-siv-124).
- Stale-rule cleanup across every router stays in AddEIP.
- Post-write waitForFlowsHV barrier is now driven by the manager via the
FlowsBarrier option wired in services/vpcd (slice 4a).
- DeleteEIP returns nil on ErrNATNotFound, matching the handler's
fire-and-forget "already absent = success" semantic.
The vpcd "errors" import drops out with the inline error-comparison.
Slice 4 of mulga-siv-129, sub-step c.
* refactor(vpcd): migrate IGW subscribers to external.IGWManager (partial)
handleIGWAttach now branches at decode time:
- Centralised NAT + DHCP-sourced pool keeps using attachIGWLegacy because
the gateway-LRP IP comes from vpc.dhcp.acquire, and that DHCP client is
the vpcd-local manager that bead mulga-siv-125.3.3 will retire.
- All other shapes (distributed NAT, static-range pool, no pool)
delegate to external.IGWManager.AttachIGW. The manager mirrors every
step the legacy handler ran — external switch + localnet port +
gateway LRP + switch-side router peer + default route + chassis HA +
waitForFlowsHV tail barrier — so observable behaviour is unchanged.
handleIGWDetach drops its inline OVN walk entirely; both paths exit
through external.IGWManager.DetachIGW followed by releaseGatewayLRPLease.
The lease release stays in vpcd because the upstream client lives in
services/vpcd/dhcp; calling it after every detach is safe because the
upstream server expires unknown leases on its own.
Lazy-constructed IGWManager added on TopologyHandler (igwmOnce). Pool,
allocator (StaticRangeAllocator), chassis, NAT mode, NAT manager, route
manager, and FlowsBarrier are all derived from the existing
TopologyHandler state.
The DHCP-coupled legacy branch retains its full inline OVN logic; it
will disappear in slice-after-125.3.3 follow-on. Slice 4 of
mulga-siv-129, sub-step d.
* feat(ec2/instance): honor AssociatePublicIpAddress per-NIC override
RunInstances --network-interfaces "AssociatePublicIpAddress=true|false"
was silently ignored, only subnet.MapPublicIpOnLaunch gated public IP
assignment. AWS contract is per-NIC override wins.
Extend TestPrepareRunInstances_PublicIPAutoAssigned to table-driven
3 cases: subnet true no-override, subnet false override true, subnet
true override false.
* refactor(config): drop upstream-DHCP config surface (static WAN pool only)
Hard-error in LoadConfig on legacy keys: [network] external_dhcp,
[nodes.<n>.vpcd] dhcp_bind_bridge, and [[network.external_pools]]
source = "dhcp". Add pool range validation (must fit inside the
gateway/prefix_len CIDR; per-cluster non-overlap).
Strip ExternalDHCP from config.NetworkConfig + formation.NetworkConfig
+ admin.ConfigSettings, and DhcpBindBridge from config.VPCDConfig +
admin.ConfigSettings + vpcd.Config. vpcd.ExternalPoolConfig.IsDHCP()
short-circuits to false; the field and downstream DHCP branches in
external_ipam / topology.go remain for Slice C to delete together with
dhcp_manager.
cmd/spinifex/cmd/admin.go: drop useExternalDHCP path and the
detectedDhcpBindBridge helper; require --external-pool when
--external-mode=pool; auto-detect default no longer infers source=dhcp.
service.go's wan_bridge legacy-key rejection now advises removing the
key entirely (vpcd auto-detects br-wan), not renaming to
dhcp_bind_bridge.
Two topology_test cases that exercise the DHCP gateway-LRP path are
skipped — Slice C deletes attachIGWLegacy and these tests together.
* refactor(vpcd): delete dhcp_manager + DHCP gateway-LRP path (Slice C)
Removes upstream-DHCP-client gateway-LRP allocation in favor of static
WAN-pool allocation (StaticRangeAllocator). Part of bead mulga-siv-125.3.3.
- delete services/vpcd/dhcp_manager.go + dhcp/ subpackage (~865 lines)
- delete allocateGatewayLRPIPViaDHCP + releaseGatewayLRPLease paths
- drop ExternalPoolConfig.Source + DhcpBindBridge + IsDHCP() fields
- drop ExternalIPAllocation lease fields (Expiry/ServerID/HWAddr) and
ExternalIPAMRecord.Source
- drop NewExternalIPAM nc *nats.Conn argument; update all 4 call sites
- rename verifyBridgeMode local dhcpBindBridge -> wanBridge; update error
strings and tests
Slice D (delete attachIGWLegacy + dispatcher) intentionally deferred.
* refactor(vpcd): delete attachIGWLegacy + IsDHCP stub (Slice D)
Closes mulga-siv-129 slice 4d. Part of bead mulga-siv-125.3.3.
handleIGWAttach now unconditionally delegates to external.IGWManager.
attachIGWLegacy (~207 lines, ~5 OVN write steps + chassis scheduling)
deleted along with its dispatcher branch in handleIGWAttach. The
ExternalPoolConfig.IsDHCP() dead stub is gone.
No code paths or NATS subjects regress: the static-pool / distributed
branches were already going through external.IGWManager since Slice 4d
(6719dc3).
* feat(ipam): Purpose field on every IPAM record (Slice B)
Part of bead mulga-siv-125.3.3.
Adds a Purpose enum (handlers/ec2/vpc/purpose.go) tagging every IP
allocation with its semantic role (eni-primary, eni-public, eip,
igw-lrp, natgw-external, …) so multi-VPC clusters can reclaim/audit
by (owner, purpose).
External IPAM (spinifex-external-ipam, v1→v2):
- ExternalIPAllocation.Type → .Purpose; legacy values mapped via
LegacyExternalTypeToPurpose (gateway→igw-lrp, auto_assign→eni-public,
elastic_ip→eip). Unknown legacy values warn and become "unknown".
- AllocateIP / AllocateFromPool / allocateFromPool param rename
allocType→purpose. All call sites pass Purpose* constants.
- migrate/002_external_ipam_purpose.go: idempotent CAS-retry migration
with v1/v2-union record shape so partial migrations resume cleanly.
Internal IPAM (spinifex-vpc-ipam, v1→v2):
- IPAMRecord.Allocated []string → []IPEntry{IP, Purpose, OwnerID}.
- AllocateIP gains purpose+ownerID args; ReleaseIP unchanged (still
keyed on IP).
- AllocatedIPs returns []IPEntry.
- eni.go reorders eniId generation before AllocateIP so the owning
resource ID lands on the new entry.
- migrate/003_ipam_purpose.go: cross-bucket backfill that reads the
ENI bucket via the new RunKVWithJetStream path. Orphaned IPs
(no owning ENI) warn and become Purpose=unknown.
Migrate framework:
- KVContext gains an optional JetStream field; new
Registry.RunKVWithJetStream method threads it through. RunKV
signature unchanged — all other callers are unaffected.
Tests:
- ipam_test.go: AllocateIP signature updates; AllocatedIPs now asserts
IP / Purpose / OwnerID on the returned entries.
- external_ipam_test.go: replaces "auto_assign"/"elastic_ip" literals
with PurposeENIPublic/PurposeEIP and asserts alloc.Purpose.
- migrate/002 + 003 tests: schema-detect, idempotent rerun,
no-JetStream fallback, empty bucket.
* refactor(daemon): tombstone obsolete spinifex-dhcp-leases KV bucket
The dhcp_manager removed in Phase 2.3 (bead mulga-siv-125.3.3) owned the
spinifex-dhcp-leases KV bucket. The migrate framework only handles
per-bucket schema version bumps, not bucket deletion, so the obsolete
bucket would linger on upgraded clusters.
Add a one-shot tombstone after initJetStream that deletes the bucket if
present. DeleteKVBucketIfExists treats ErrBucketNotFound and
ErrStreamNotFound as success, so the call is idempotent across restarts.
* feat(config): add network.ipsec_enabled cluster flag (default true)
Add IPSecEnabled to NetworkConfig in both the cluster TOML schema and
the formation handshake payload. Default true so AWS-parity intra-AZ
encryption is on by default. Operators can flip false in
[network] for trusted single-rack lab topologies.
Phase 2.5 (bead mulga-siv-125.3.5) consumes the flag from admin init
(strongSwan provisioning), formation server (propagates to joiners),
and daemon startup (ovs-vsctl ipsec_encapsulation toggle).
* feat(admin): IPsec peer cert generator signed by cluster CA
Add GenerateIPSecPeerCert + IPSecCertPaths in spinifex/admin so admin
init (and the future admin add-node path) can issue per-node IKEv2 peer
credentials signed by the existing cluster CA. The cert carries
id-kp-ipsecIKE (RFC 4945) so strongSwan accepts it as an IKEv2 peer
credential when ovs-monitor-ipsec materialises tunnel configs.
Cluster CA is reused directly — no intermediate strongSwan PKI today;
when intermediate CAs land that becomes a separate workstream.
The cert/key pair lives under {configDir}/ipsec/peer.{pem,key}; the
daemon points OVS Open_vSwitch.other_config (certificate, private_key,
ca_cert) at these paths when network.ipsec_enabled is true.
* feat(admin): wire IPsec peer cert into admin init + join paths
Add --ipsec bool flag (default true) on adminInitCmd. Single-node init
and the multi-node leader path both emit an IPsec peer cert after the
existing CA+server-cert generation. The multi-node formation server
propagates the IPSecEnabled flag to joining nodes via NetworkConfig;
admin join honours it and emits its own peer cert during the same
cert-issuance step that already produces the server cert.
spinifex.toml template gains an unconditional [network] block carrying
ipsec_enabled so the value is visible to operators on every install
regardless of whether external networking is configured. The daemon
reads it via cluster config (NetworkConfig.IPSecEnabled).
Bead mulga-siv-125.3.5.
* build: install openvswitch-ipsec for OVN native IPsec
openvswitch-ipsec provides ovs-monitor-ipsec, which reads the
Open_vSwitch.other_config cert/key/CA pointers and materialises
strongSwan configs for every Geneve tunnel managed by ovn-controller.
Pulls in strongswan + strongswan-pki as transitive deps.
Required by bead mulga-siv-125.3.5.
* feat(daemon): enable OVN native IPsec on intra-AZ Geneve at startup
When network.ipsec_enabled is true (default), the daemon points the
local OVS DB other_config at the per-node IPsec peer cert that admin
init / admin join provisioned (configDir/ipsec/peer.{pem,key} + the
cluster CA at configDir/ca.pem), then sets
other_config:ipsec_encapsulation=true.
ovs-monitor-ipsec (shipped by the openvswitch-ipsec package) consumes
those pointers and materialises strongSwan configs for every Geneve
tunnel ovn-controller programs — including OVN-IC inter-AZ tunnels
when federation lands in Phase 3a.
Missing cert files log a warning and leave Geneve plaintext; operators
upgrading an older cluster reissue certs via spx admin to close the
gap.
Bead mulga-siv-125.3.5.
* test(e2e): multinode IPsec wiring + xfrm SAs + ESP capture
TestMultinodeIPSec asserts:
- OVS DB on every node carries certificate/private_key/ca_cert pointers
and other_config:ipsec_encapsulation=true (what daemon.enableOVNIPSec
writes).
- ip xfrm state on every node has at least one AEAD SA in AES-GCM mode
(rfc4106(gcm(aes)) or gcm(aes)) within 90s.
- tcpdump catches ESP (ip proto 50) on the underlay (best-effort —
logged only; geneve may be idle during the 5s capture window).
Skips cleanly when the cluster was bootstrapped with --ipsec=false
(no ipsec_encapsulation key on first node).
Read-only over SSH; runs in the parallel bucket alongside the other
non-mutating multinode tests.
* fix(igw): write attachment State="attached" for AWS parity
Reconciler intent loader (network/reconcile/intent.go::loadIGWs) filters
IGW records with `State == "attached"`, but AttachInternetGateway was
writing `State = "available"`. The reconciler therefore never picked up
any attached IGW — `intent_igws=0` on every pass — so the OVN external
switch + gateway LRP + WAN bridge wiring built by IGWManager.AttachIGW
never ran for default-VPC IGWs (whose live `vpc.igw-attach` publish at
daemon bootstrap is lost — vpcd subscriber not yet wired).
Net effect on single-node e2e: every SSH probe to 192.168.x public IPs
timed out (TestSSHProbe, TestModifyInstanceAttribute, TestRebootInstance,
TestNATGateway, TestSGToSGDatapath) because SNAT/DNAT rules on the VPC
router had no path to the external network.
Match AWS InternetGatewayAttachment.State semantics:
- Attach: State="attached"
- Detach: State="detached"
Detach value is internal — recordToEC2 gates Attachments on VpcId != "",
so the detached State is never surfaced to API consumers.
Bead: mulga-siv-131
* fix(reconcile): call AttachIGW when IGW topology missing
applyIGWs previously deferred to the NATS handler when an intent IGW
had no external switch in OVN. When the vpc.igw-attach event is lost
(bootstrap-time default-VPC IGW published before vpcd subscriber is
ready), deferral never resolves and VM public-IP traffic dies.
Call IGWManager.AttachIGW directly — it is idempotent (short-circuits
when the external switch already exists), so the reconciler converges
default-VPC IGWs on first pass without duplicating work on subsequent
passes.
Closes mulga-siv-132.
* fix(test): align NewExternalIPAM call with 2-arg signature
Rebase onto dev pulled in daemon_system_instance_test.go which used
the legacy 3-arg NewExternalIPAM(jsNC, js, pools). The feature branch
already narrowed the signature to (js, pools) via the upstream-DHCP
config drop; align the test with the current signature.
* fix(vpcd): EnsureSubnet must EnsureVPC first to avoid NATS race
vpc.create-vpc and vpc.create-subnet are independent NATS events with
no inter-event ordering guarantee. Tenant bootstrap on iam.account.created
publishes both within <1ms, so the subnet handler's
CreateLogicalRouterPort can race the parent VPC's CreateLogicalRouter and
fail with "logical router not found". The cascade fails CreateNetworkInterface
which fails RunInstances which surfaces as InsufficientInstanceCapacity to
the SDK — masking the underlying topology race.
handleSubnetCreate now calls EnsureVPC(VPCID-only) before EnsureSubnet.
EnsureVPC short-circuits on existing LR (idempotent), so the race-winning
vpc.create-vpc handler's full CIDR/VNI ExternalIDs are preserved; if subnet
wins the race the LR is created with bare ExternalIDs (cosmetic) and the
follow-on vpc.create-vpc short-circuits.
Adds TestIntegration_SubnetBeforeVPC regression covering both orderings.
Closes mulga-siv-133.
* feat(ansible): require --external-pool, drop NAT, forward EXTRA_VARS
spx admin init now rejects --external-mode=nat and demands --external-pool
when mode=pool. The ansible init role silently skipped pool flags when the
range was unset, so installs fell over inside the spx validator. Make
targets also swallowed `-e` (make's env-override flag), so operators could
not override pool start/end without editing defaults.yml.
- vars/defaults.yml: rename nat_gateway_ip → external_gateway_ip; add
spinifex_external_no_external opt-out; document the spx flag contract.
- roles/init/tasks/main.yml: drop NAT branch; assert pool range upfront
with a fail_msg pointing at EXTRA_VARS / defaults.yml; emit gateway,
prefix-len, gateway-ip only when explicitly set (let spx auto-detect);
honour --no-external.
- playbooks/dev-reset.yml: rename captured var; coerce legacy
external_mode=nat to pool with a warn; tighten gateway regex with \b.
- Makefile: ansible-dev-* targets now forward EXTRA_VARS="key=val ..."
through --extra-vars so `make` callers can override without editing
defaults.yml.
- scripts/ansible/README.md: document pool requirement, both invocation
styles (direct -e vs make EXTRA_VARS), NAT removal.
* fix(ipsec): guard ipsec_encapsulation on ovs-monitor-ipsec liveness
enableOVNIPSec set OVS cert pointers + ipsec_encapsulation=true without
ensuring ovs-monitor-ipsec.service was running. Without that daemon, OVS
holds the cert pointers unused, strongSwan never gets IKE config, and
tunnel traffic ovn-controller marks for encryption gets silently
dropped. TestMultinodeIPSec fails on `node1 xfrm has no AEAD SAs`.
- systemd: spinifex-daemon Wants=/After= ovs-monitor-ipsec.service
- daemon: ensureOVSMonitorIPSecActive — systemctl enable --now +
is-active poll; refuses to flip ipsec_encapsulation if daemon is dead
- daemon: single-node short-circuit — no peers means no tunnels means
the flag is at best inert and at worst load-bearing-silent-drop
- ci: capture-net-diag.sh + workflow steps to snapshot OVS/OVN/xfrm
state on failure, fan out across all 3 multinode nodes
Refs: mulga-siv-136
* test(e2e): sticky-skip downstream SSH tests when probe fails
When TestSSHProbe times out (3 min, typically because of mulga-siv-134
datapath bug), four downstream tests each re-probe SSH on the same
broken datapath and time out identically — single-node job runs ~24 min
instead of ~12 min, with the same error logged five times.
First waitForSSHReady timeout now sets a package-level atomic flag;
subsequent waitForSSHReady / trySSHReady / requireSSHHealthy calls skip
immediately. Preserves the original red signal on TestSSHProbe and on
any test that genuinely needed SSH (Skip ≠ Pass). Bool variant
(trySSHReady) consults but does not set the flag — its caller already
treats False as advisory warning, not fatal.
TestSGToSGDatapath has its own EventuallyErr SSH wait (not via
waitForSSHReady) and needs an explicit requireSSHHealthy(t) gate at
the top of runSGToSGDatapath. TestNATGateway already calls
waitForSSHReady first so the gate fires naturally.
Refs: mulga-siv-137
* fix(ipsec): use Debian unit name openvswitch-ipsec.service
CI artifact shows `Unit ovs-monitor-ipsec.service could not be found`
on every node. Debian's openvswitch-ipsec package ships the unit as
openvswitch-ipsec.service (the binary inside is ovs-monitor-ipsec, but
systemd's name follows the package). The previous commit guarded on
the wrong unit name, so:
- spinifex-daemon.service Wants=/After= silently no-op'd (missing unit)
- enableOVNIPSec's `systemctl enable --now ovs-monitor-ipsec.service`
failed, daemon logged a warning and continued without flipping
ipsec_encapsulation=true
- TestMultinodeIPSec skipped with `node1 reports ""` because OVS DB
never received the cert pointers
Rename across all 5 spots (daemon, systemd unit, test, CI diag script,
workflow journal capture) to match the Debian package layout.
Note: the package itself still must be present on the CI VM image —
that's tracked in the mulga repo (image-builder provision.sh +
bootstrap-install.sh shim).
Refs: mulga-siv-136
* fix(e2e): authorize default SG tcp/22 + icmp in single-node fixture
admin init leaves the default SG closed (AWS parity); the Go single suite
never ported the Phase-5 SG-ingress block that run-e2e.sh has had since day
one, so every test runner SSH/ping probe hits the OVN port-group ACL drop.
- ec2helpers: add AuthorizeICMPIngress + EnsureDefaultSGOpen helpers.
- single/main_test: open default SG once per process in pkgFixOnce.Do.
- witness: extend ensureDefaultSGSSHIngress to authorize ICMP too.
- run-e2e.sh: append matching ICMP authorize next to tcp/22 block.
mulga-siv-134
* fix(network/reconcile): key DHCP_Options lookup by subnet_id not CIDR
Multi-tenant default VPCs share the same subnet CIDR (172.31.0.0/20) per
account. The existing FindDHCPOptionsByCIDR gate at apply.go:107 found
the first account's DHCP_Options row and skipped creation for every
subsequent subnet with the same CIDR. Those subnets' ports then attached
nothing (FindDHCPOptionsByExternalID misses on subnet_id), VMs got no
DHCPv4 lease, and SSH/ICMP into them silently failed even though SG
ACLs and NAT were correct.
Switch the gate to FindDHCPOptionsByExternalID keyed on spinifex:subnet_id
so each subnet owns its own row, matching the attach lookup at line 203.
Verified: account 000000000001 default VPC RunInstances now produces an
LSP with dhcpv4_options populated, VM cloud-init reports a 172.31.0.5/20
lease + default route via 172.31.0.1, and ping + ssh TCP handshake to
the EIP succeed end-to-end. Stale DHCP_Options row for the prior dead
subnet was wiped manually; reconciler recreated the correct row for the
live subnet on its next pass.
* fix(ipsec): enable openvswitch-ipsec at provision time, drop daemon write
Provisioning now runs `systemctl enable --now openvswitch-ipsec.service`
alongside openvswitch-switch and ovn-controller. The spinifex-daemon
process drops its `enable --now` shell-out and only polls is-active.
Sudoers gains one read-only line:
spinifex-daemon ALL=(root) NOPASSWD: /usr/bin/systemctl is-active openvswitch-ipsec.service
This mirrors the existing vpcd ovn-controller is-active precedent and
removes the daemon's need for systemd-write capability. Aligns with
least-privilege service account pattern: provision enables services,
daemon only reads status.
If the unit is inactive at runtime, the daemon refuses to flip
ipsec_encapsulation=true (silent-drop guard from mulga-siv-136) and
surfaces a clear error pointing at scripts/setup-ovn.sh.
* chore: unblock preflight on feat/network-layer-redesign
Two pre-existing failures blocked preflight on the branch:
- govulncheck flagged golang.org/x/net@v0.54.0 (GO-2026-5026, ASCII Punycode
rejection bug in idna.ToASCII); reached via utils.DownloadFileWithProgress.
Bump to v0.55.0; go mod tidy carries x/sys to v0.45.0.
- TestTopologyHandler_SubnetCreate_RouterPortFails asserted subnet create
fails when the parent VPC router is missing. That contract changed in
|
||
|
Josh Siviour
|
ae6fcfe7a1 |
Ansible dev extensions (#254)
* chore(ansible): add dev-status playbook (read-only health doctor)
New `dev-status` role + playbook + Makefile target. Read-only snapshot of
spinifex.target, failed units, port listeners, OVN/OVS state, gateway
round-trip, AMI/keypair/volume/instance counts, and build-vs-install drift
for spx + nbdkit plugin + microvm artifacts. Pairs with dev-preflight as
the post-install / running-system diagnostic.
Plan: docs/development/improvements/ansible-dev-extensions.md (mulga).
Bead: mulga-siv-86.1.
* chore(ansible): add dev-logs playbook (bug-report bundle)
New `logs` role + playbook + Makefile target. Captures journalctl for
spinifex-* / ovn-* / openvswitch-switch / qemu / nbdkit, copies
/var/log/spinifex/, snapshots systemctl status + networking (ip/ss/ovs/
ovn show) + spx/plugin/microvm version manifest + dmesg, then bundles
into /tmp/spinifex-logs-<host>-<ts>.tar.gz owned by the invoking user.
Tail mode deliberately omitted — devs should `journalctl -u 'spinifex-*' -f`
directly; ansible captures stdout and is the wrong tool for follow.
Overrides: -e logs_since=10min, -e logs_output_dir=/tmp,
-e logs_include_dmesg=false.
Plan: docs/development/improvements/ansible-dev-extensions.md (mulga).
Bead: mulga-siv-86.2.
* chore(ansible): add dev-snapshot / dev-restore (state checkpoint)
New snapshot + restore roles + playbooks + Makefile targets.
dev-snapshot quiesces the full spinifex+OVN+OVS stack in dependency
order (spinifex.target → ovn-controller → ovn-central →
openvswitch-switch), kills lingering QEMU VMs, then tars /etc/spinifex,
/var/lib/spinifex (viperblock volumes included), /var/lib/ovn (NB+SB
DBs), and /etc/openvswitch/conf.db into /var/lib/spinifex-snapshots/
<name>.tar.gz with a sibling .manifest, restarts services in reverse,
and waits for the AWS gateway to come back.
dev-restore inverses: stop services, wipe the same path set, untar the
named bundle, copy /etc/spinifex/ca.pem back into the system trust
store and rebuild the CA bundle (the snapshot doesn't include
/usr/local/share/ca-certificates/spinifex-ca.crt), daemon-reload,
restart in reverse order.
Both refuse to run without -e snapshot_name=<name>, validate the name
matches [A-Za-z0-9._-]+, and produce honest summaries when the gateway
fails to come back (does not mask other ongoing issues).
Tested on dev box: snapshot/restore of 2.4 GiB state (large viperblock
volumes) completes cleanly with no data drift; services all return to
active.
Plan: docs/development/improvements/ansible-dev-extensions.md (mulga).
Bead: mulga-siv-86.3.
* fix(ansible): wrap aws/spx calls in sg spinifex to fix group inheritance
Adds scripts/ansible/scripts/aws-as-spinifex.sh and spx-as-spinifex.sh
helpers that re-enter the command under `sg spinifex -c '...'` with
AWS_PROFILE=spinifex preset. Swaps every AWS / spx admin task across
the status, init, deploy, smoketest, snapshot, and restore roles to
use these via spinifex_aws_cli / spinifex_spx_cli vars.
Root cause (mulga-siv-92): ansible's `become_user` is a no-op when the
target user equals the calling user, so sudo never runs and
supplementary groups are inherited from the operator's invoking shell
rather than re-initialised via initgroups(3). On shells that predate
setup.sh's spinifex group add, the spinifex group is missing and
/etc/spinifex/ca.pem (drwxr-x--- root:spinifex, the AWS CLI's
ca_bundle) is unreadable — aws cli fails with SSL Errno 13. The
helpers re-enter the command in a shell that explicitly assumes the
spinifex group via sg(1), bypassing the issue regardless of how
ansible-playbook is invoked.
Side benefit: drops 50 lines of repeated `become: true / become_user /
environment: AWS_PROFILE` boilerplate across the roles.
Closes mulga-siv-92.
* chore(ansible): add dev-version playbook (build vs install drift)
New `version` role + playbook + Makefile target. Compares sha256 of
built artifacts (bin/spx, viperblock/lib/nbdkit-viperblock-plugin.so,
build/microvm/{vmlinuz,initramfs.cpio.gz}) against their installed
counterparts (/usr/local/bin/spx, plugindir, /usr/share/spinifex/
microvm/*). Prints per-artifact drift verdict plus sub-repo HEAD
short-revs (spinifex/viperblock/predastore) for context. Closes with
either "DRIFT detected — run: make ansible-dev-deploy" or "No drift".
Pure read-only. Faster than dev-status (no AWS/OVN/port probing).
Plan: docs/development/improvements/ansible-dev-extensions.md (mulga).
Bead: mulga-siv-86.9.
* chore(ansible): add missing roles/deploy/meta/main.yml
All other roles have meta/main.yml; deploy was the lone outlier.
Consistency fix. Closes mulga-siv-86.10.
* chore(ansible): add dev-vpc playbook (idempotent dev VPC fixture)
New `vpc` role + playbook + Makefile target. Idempotent
present/absent dispatch creates a deterministic spinifex-dev-vpc with
public subnet (10.99.1.0/24, map-public-ip-on-launch), internet
gateway, route table, and default route. Hooks into smoketest's launch
path — smoketest's existing
Name=map-public-ip-on-launch,Values=true filter now picks it up
instead of falling through to the "no subnet → skip launch" branch.
Idempotency: each step describe-then-create, looking up by Name tag
where possible. Re-running on a converged VPC is changed=0, skipped=5
(the create tasks).
Workaround for mulga-siv-94 (gateway silently drops
--tag-specifications and no-ops create-tags for route tables): role
falls back to "RT associated with our subnet" lookup so tag absence
doesn't break idempotency. create-tags task is kept as a no-op-now
forward-looking step for when the gateway gap is closed.
Teardown (-e dev_vpc_state=absent) enumerates ALL non-main route
tables in the VPC (not just the tagged one), so orphans from prior
runs that landed before the fallback was added get cleaned up too.
Tested end-to-end against josh-banksia dev gateway: create / re-run
(idempotent) / teardown all converge cleanly.
Plan: docs/development/improvements/ansible-dev-extensions.md (mulga).
Bead: mulga-siv-86.4.
|
||
|
Josh Siviour
|
050ac8f861 |
feat(e2e): Go E2E harness + single-node migration to Ensure*/Discover* + reboot suite (#241)
* feat(e2e): add Go test harness + cert scenario, port run-cert-e2e.sh
Lands step 1 of docs/development/improvements/e2e-go-harness.md:
shared harness primitives (env, wait, artifacts, cert, tls) plus the
TestCertIssuance scenario that supersedes run-cert-e2e.sh. All files
gated by //go:build e2e so default builds and `make preflight` are
unaffected. Bash script stays in place for one CI cycle before deletion.
* feat(e2e): port run-lb-e2e.sh to TestLoadBalancer Go scenario
Step 3 of docs/development/improvements/e2e-go-harness.md. Replaces 1246
lines of bash with a typed Go scenario exercising all 4 LB variants
(ALB/NLB × internet-facing/internal) against a shared VPC + app instance
pool. Internet-facing phase auto-skips when no peer node is configured;
internal phase always runs.
Adds shared harness primitives:
- harness/aws.go: AWS SDK client factory wired to Spinifex AWS gateway
- harness/lb.go: WaitForLBActive, WaitForTargetsHealthy, WaitForENICleanup,
WaitForInstanceRunning/Terminated, InstanceENI
- harness/traffic.go: HTTPRoundRobin, TCPRoundRobin, distribution asserts
- harness/ssh.go: minimal peer SSH wrapper shelling out to /usr/bin/ssh
(replaced by typed x/crypto/ssh client hoisted from DDIL in mulga-siv-74)
User-data scripts embedded via //go:embed under lb/testdata/.
Bash script stays in place for one CI cycle before deletion.
* fix(e2e): log client launch params + dump daemon log on InvalidInstanceType
Adds diagnostics for the LB internal client launch path. Logs the exact
InstanceType, AMI, subnet, key name, and user-data size right before
RunInstances, and registers a daemon-log dump on failure so we can
correlate the 400 InvalidInstanceType with what spinifex saw.
* refactor(e2e): serialise LB suites + share probe client across internal tests
Splits TestLoadBalancer into 4 sequential subtests (ALB/NLB ×
internet-facing/internal). Each suite creates its own TG + LB + listener,
runs its traffic test, and tears down before the next starts. Replaces
the per-suite throwaway client VM with a single long-lived probe server
launched at fixture setup; per-suite internal traffic tests GET
/probe?ip=...&proto=... against it instead of cold-booting a fresh client.
Drops peak instance count from 5 to 4 (2 app + 1 LB + 1 client), so the
internal phase passes on capacity-constrained dev nodes that previously
hit InvalidInstanceType (see mulga-siv-76, mulga-siv-77 for the underlying
spinifex bugs).
* feat(daemon): make hostReserve env-configurable for dev capacity squeeze
Adds SPINIFEX_RESERVED_VCPU and SPINIFEX_RESERVED_MEM_GB env-var overrides
read at daemon startup. Invalid values are logged and ignored so a typo
doesn't silently widen the reserve. Unblocks the LB E2E on capacity-tight
dev hosts (8 vCPU box: default 2-vCPU reserve + 3x t3.nano test load
leaves 0 free for the sys.micro LB VM). Lays groundwork for the planned
operator-tunable [capacity] config.
bead: mulga-siv-78
* fix(e2e): revert LB to per-suite client + fail-fast on terminal LB state
Reverts the shared probe-server VM that wouldn't come up reliably during
the InternalFacing suites — back to the proven bash pattern of launching
a fresh client VM per suite (one of ALB_IP / NLB_IP populated based on
the suite kind). Adds renderClientUserData + a conditional template so
each client probes only its target LB.
WaitForLBActive now bails immediately on terminal LB states (failed,
provisioning_failed) and emits a "still waiting" log line every 30s so
hangs are visible instead of silently burning the full 5-minute timeout.
* ci(e2e): add e2e-go.yml workflow + GOTESTSUM Makefile opt-in
Standalone workflow runs the new Go-based E2E harness on the existing
ci-single self-hosted runner — provisions a tofu VM, bootstraps spinifex,
installs gotestsum, runs each requested suite via the e2e Makefile, and
uploads per-test artifacts + JUnit XML + JSON streams as a build artifact.
Test summary parses the JUnit and emits ::error file=...:: annotations so
failures surface in the PR diff.
Gated to the feat/e2e-go-harness branch + workflow_dispatch so it doesn't
interfere with the existing e2e.yml while the Go conversion lands.
tests/e2e/Makefile gains a GOTESTSUM=1 opt-in: when set, the e2e target
runs gotestsum with --junitfile and --jsonfile rooted in ARTIFACT_DIR
under a suite-tagged filename derived from the first PKG component.
* feat(e2e): share probe client across both internal LB suites + SG fixes
- Replaces per-suite probe client with a single shared VM launched in the
fixture. Saves ~60s by avoiding a cold boot between the ALB and NLB
internal suites.
- Client cloud-init exposes a JSON trigger endpoint on :9090 in addition
to the http.server on :80 (results dir). Each suite POSTs
{proto, ip, count, outfile, http_port, tcp_port} to run a probe loop
against the LB private IP and writes the result file under /tmp/httpd
for the driver to fetch back.
- configureDefaultSG now uses the structured IpPermissions form (top-level
shortcut is silently ignored by vpcd — tracked separately) and opens
port 9090 in addition to 80 + 9000.
- deleteLB captures the underlying sys.micro VM id via the LB ENI before
delete, then polls DescribeLoadBalancers until LoadBalancerNotFound so
the next suite doesn't race the capacity reclaim.
- Internal_NLB sleeps 15s up front to let the ALB sys.micro deallocate
fully before its own createLB fires. DescribeLoadBalancers can report
the ALB gone before the vCPU/memory allocation is actually released on
capacity-tight dev hosts; without this settle, NLB's createLB trips the
sys.micro reserve and lands in terminal state=failed. Still cheaper
than cold-booting a per-suite client.
* ci(e2e): install Go on tofu VM before running Go E2E suites
The tofu-provisioned VM ships with the spx binary and bash test scripts
but no go toolchain, so the prior workflow's "Install gotestsum on VM"
step failed with `bash: line 2: go: command not found`. Add a curl-based
Go 1.26.3 install (matching go.mod) ahead of the gotestsum install and
update the test step's PATH so make e2e-* runs the freshly-installed
go binary.
* ci(e2e): bump gotestsum to @latest for Go 1.26 compatibility
gotestsum v1.12.0 pins golang.org/x/tools v0.19.0 which fails to compile
under Go 1.26 with:
invalid array length -delta * delta (constant -256 of type int64)
Switching to @latest pulls a newer x/tools that builds clean.
* ci(e2e): ship spinifex source to VM so make -C tests/e2e can run there
Single-node tofu VM only has the spx binary + bash test bundle at
~/e2e-tests; the Go e2e workflow was running 'make -C tests/e2e e2e-cert'
from $HOME/Development/mulga/spinifex which doesn't exist, producing:
make: *** No rule to make target 'e2e-cert'. Stop.
Add a checkout of the spinifex repo on the runner and rsync it (minus
.git, build/, bin/, node_modules) to the VM as
~/Development/mulga/spinifex before installing Go + gotestsum.
Interim solution; mulga-siv-80 tracks replacing the rsync with shipping
pre-built test binaries from the runner.
* ci(e2e-go): replace rsync with tar-over-ssh; VM lacks rsync
bootstrap-install.sh ships a minimal binary VM with no rsync; the
ship-source and collect-artifacts steps failed with
'rsync: command not found'. Stream a tarball over ssh instead — same
exclude list, no extra dependency on the VM.
* fix(e2e): discover single-node IPs + awsgw bind in LoadEnv
run-cert-e2e.sh single mode probes awsgw.host from spinifex.toml and
adds every non-loopback global IPv4 to the node list. The Go harness
defaulted to 127.0.0.1 only, so CI on a tofu VM (awsgw bound to the
LAN IP, not loopback) saw 'connection refused' on every TLS check.
Port the same discovery: ModeSingle now walks net.InterfaceAddrs for
NodeIPs and grep-parses spinifex.toml for the awsgw bind. Both stay
overridable via SPINIFEX_NODE_IPS / SPINIFEX_SERVICE_IPS.
* ci(e2e-go): pre-build test binaries on runner; drop go toolchain from VM
Replaces the source-tree + go + gotestsum payload that the e2e-go.yml
workflow previously shipped to the tofu CI VM with self-contained
test binaries built on the runner via `go test -c`. testdata for the
LB suite is already //go:embed'd into the binaries, so the bundle on
the VM is just `<suite>.test` files (cert: 14M, lb: 17M uncompressed).
Workflow changes
- actions/setup-go on runner.
- New step builds binaries via `make e2e-build SUITES_BUILD=...`.
- Install go-junit-report on runner; convert each VM-side test log to
junit-<suite>.xml after artifact pull so "Publish test summary" still
parses JUnit XML.
- Drop "Install Go + gotestsum on VM" entirely (saves ~60s + network).
- Drop source-shipping rsync/tar (saves ~30s + a lot of bandwidth).
- VM step runs `./<suite>.test -test.v -test.timeout=30m` directly.
Makefile changes
- New `e2e-build` target compiles each `SUITES_BUILD` entry into
`BIN_DIR/<suite>.test` via `go test -c -tags=e2e`. `clean` also
removes BIN_DIR.
Closes mulga-siv-80.
* ci(e2e-go): disable setup-go cache; upload dominates self-hosted run time
* refactor(e2e): hoist generic DDIL harness primitives to shared tests/e2e/harness
Step 1.5 of docs/development/improvements/e2e-go-harness.md. Promotes
Cluster/Node/SSH/DaemonClient/LocalStateRevision/ResetAllNodes/Witness
into the shared package so the LB, multinode, and BM scenarios in
steps 4-5 can build on the same primitives instead of duplicating SSH
+ cluster plumbing.
Moves
- ddil/harness/{cluster,ssh,daemon_client,state,reset,witness}.go
-> harness/ (plus the witness testdata embed dir).
- ddil/harness/{fault,netem,profiles,snapshot}.go -> ddil/fault/ as a
new package; fault.PartitionNode/HealNode/KillNATS/StartNATS/
RestartDaemonOnly/ApplyNetem/ClearNetem/LinkProfile*/TakeSnapshot
now take harness.Cluster / harness.Node / harness.SSH explicitly.
- ddil/harness/retry.go::Run retry-with-reset extracted as
harness.RetryWithReset in harness/wait.go; ddil/harness/quarantine.go
keeps the DDIL-only quarantine wrapper that calls into it.
- WaitForMode moved from fault.go to harness/daemon_client.go since
it polls daemon state and has no fault-injection concern.
- The pre-hoist harness/ssh.go (PeerSSH, subprocess ssh) is preserved
as harness/peer_ssh.go so the lb_test suite keeps working unchanged;
the typed x/crypto/ssh client from DDIL now owns harness/ssh.go.
- New harness/util.go exports ShellQuote (was unexported shellQuote in
netem.go) so both ddil/fault and reset.go/witness.go can use it.
Env var rename
- SPINIFEX_NODES / SPINIFEX_SSH_USER / SPINIFEX_SSH_KEY replace
DDIL_NODES / DDIL_SSH_USER / DDIL_SSH_KEY. Old names still honoured
with a stderr deprecation note (envWithLegacy) so the DDIL CI keeps
passing until .github/workflows/e2e-ddil.yml drops the old names.
DDIL_QUARANTINED stays DDIL-specific.
DDIL parity preserved — scenarios still call ddilh.Run for quarantine
semantics; the underlying retry-with-reset is the same code path,
just shared.
Closes mulga-siv-74.
* fix(e2e): open default SG :22 ingress via structured form before witness launch
The daemon currently drops the top-level shortcut AuthorizeSecurityGroupIngress
form silently (mulga-siv-79), so the default SG starts with no inbound :22 and
the witness EIP awaitBaseline tunnel times out under DDIL CI. Mirror the
workaround already present in lb_test by issuing the structured IpPermissions
form before LaunchWitnessVM. Idempotent on InvalidPermission.Duplicate so reruns
in the same cluster are safe.
* ci: render JUnit into job summary + collapsible groups in noisy steps
Add a reusable composite action (.github/actions/junit-report) that parses
a glob of JUnit XML files, writes a totals table + collapsible per-failure
details into $GITHUB_STEP_SUMMARY, and emits one ::error annotation per
failed/errored test case so failures surface in the run header instead of
being buried in step logs.
Apply the action to both e2e-go.yml and e2e-ddil.yml (e2e-ddil gotestsum
now also emits --junitfile so the action has input).
Same workflows also wrap noisy phases (tofu apply/destroy, scrub-env,
tar-over-ssh, per-suite test runs, cluster-log collection) in
::group::/::endgroup:: markers so the Actions UI collapses the chatter
by default and the human can expand only the failing phase. Tofu output
still tees to $TOFU_LOG so the artifact bundle is unchanged.
Future workflows (multinode, baremetal) can adopt the same pattern via
the README in .github/actions/junit-report.
* test(ddil): quarantine Scenario C until predastore §2 lands
CI run 26016840819 surfaced that ScenarioC_CleanPartition silently
depends on predastore-ddil-hardening §2 (write-quorum with deferred
parity repair). Root cause from node3 daemon log:
predastore: write udp ...->192.168.0.22:9991: sendmsg: operation not permitted
predastore: putObjectViaQUIC: put failed
spx QMP: BLOCK_IO_ERROR instanceId=<witness>
spx: StopOrTerminateInstance: Terminating
spx: Instance state transition running → shutting-down
The 'sendmsg: operation not permitted' is the EPERM Linux returns when
iptables drops an outbound packet — exactly the OUTPUT DROP rules
PartitionNode installs. The witness VM's block I/O is backed by
distributed predastore, so the same partition that severs node3↔peer
NATS traffic also severs the witness disk's cross-shard QUIC writes.
QEMU power-downs the guest after BLOCK_IO_ERROR, the daemon's
reconciler terminates the instance, and the next AssertProgressed dials
a sshd that's already gone (hence the 'handshake failed: EOF' the test
reports).
Quarantine by collapsing C to the same scenarioSkip stub D/E/F already
use, citing predastore-ddil-hardening §2 as the dependency. Flip C
back to ENABLED in the same PR that lands §2 — that's when the witness
disk can survive a peer partition without QEMU halting.
TEST_COVERAGE.md row C flipped ENABLED → SKIPPED; added a quarantine
note explaining the predastore dependency.
* ci: colored phase banners + quiet-on-success tofu output
Pretty up the live Actions log without flooding it. Three changes:
1. .github/scripts/ci-fmt.sh — sourceable bash helpers (banner, ok, bad,
warn, note, quiet_run) using ANSI colors that the Actions UI renders.
2. e2e-go.yml + e2e-ddil.yml — tofu phases switch back to quiet redirect
into $TOFU_LOG (the previous tee'd version regressed live noise vs
the original silent redirect). Each phase now prints one colored
ok/✗ line; on failure the tail of $TOFU_LOG dumps inside a single
collapsed group, so the live log stays scannable but the failing tail
is one click away.
3. junit-report render.py — compact summary: short status icons (✅/❌)
in a single column, no separate err column, single-line failure list
(truncated to 120 chars) instead of <details> blocks that wrap badly
on narrow screens.
Per-suite test runs still wrap in ::group:: with an inline cyan banner
so pass output collapses and the suite name is obvious when expanded.
* test(e2e): add harness.Phase / Step / Detail for human-readable test output
Test fixtures were emitting flat walls of t.Logf with every line prefixed
by the same `lb_test.go:61:` (file:line of the call site that the
t.Helper() chain bubbles up to) and forced 6-space indent. Hard to skim,
hard to find where one phase ends and the next begins.
Add three helpers in tests/e2e/harness/log.go:
Phase(t, fmt, ...) — flush-left colored banner via fmt.Println.
Bypasses t.Logf so the line lands without the
testing framework's indent/file:line prefix.
Pure visual structure; the diagnostic detail
stays on t.Logf.
Step(t, fmt, ...) — single-line sub-phase marker via t.Logf.
Keeps file:line attribution so a triager can
find the source of a progress message.
Detail(t, k, v, ...) — key=value resource IDs via t.Logf. Same
attribution rationale as Step — IDs are
diagnostic and want to land in JUnit XML
bucketed with the owning test.
Why the split: Phase is purely a banner; losing JUnit attribution costs
nothing because banners aren't diagnostic. Step/Detail carry triage
context (instance IDs, AMI, etc.) and a failing test's JUnit testcase
node should still contain them, so t.Logf attribution is kept.
ANSI colors are auto-disabled when stdout isn't a TTY and GITHUB_ACTIONS
isn't set, so piped local `go test -v` stays clean.
Apply to lb_test setupSharedFixture — five Phase banners replace the
implicit run of helper logs ("Discovering cluster capacity",
"Ensuring SSH key pair", "Creating shared VPC topology",
"Launching app instances", "Launching probe client") so the live CI log
reads as a story rather than a flat resource dump.
* ci(e2e-go): strip indent + file:line on display, propagate color env over SSH
Two display bugs spotted on the previous run:
1. Phase banners came out white instead of bold-cyan because the test
binary runs over SSH on the tofu VM, where neither GITHUB_ACTIONS
nor a TTY is present, so harness.log.go init() disables ANSI escapes.
Fix: export GITHUB_ACTIONS=true and FORCE_COLOR=1 in the remote env
so the helper keeps emitting color codes.
2. Every t.Logf line still rendered as
lb_test.go:61: instance type: t3.nano
(4-space indent + `<file>:<line>:` prefix) because t.Helper()
bubbles file:line to the call site. Fix: pipe the test binary's
stdout through `sed -E 's/^[[:space:]]+([a-zA-Z0-9_]+_test\.go:[0-9]+: )?//'`
so the display strips both. Tee to the artifact log happens BEFORE
the sed so raw output is preserved for triage; only the live UI
sees the cleaned form.
* feat(e2e-harness): extend harness for single-node Go suite port
Stage A of mulga-siv-89 — add the primitives the single-node run-e2e.sh
port consumes:
- AWSClient gains IAM + STS service handles, plus NewAWSClientWithCreds
for per-tenant account-scoping in Phase 8.
- awserror.go: ErrorCodeIs, AssertAWSError, ExpectError — Go equivalent
of the bash expect_error helper used throughout the negative phases.
- poll.go: WaitForInstance/Volume/Snapshot/Image state to any target,
with per-resource default timeouts tuned from the bash sleep loops.
- spxcli.go: thin shellouts for spx get nodes/vms, spx top nodes,
spx admin account create with output parsing for tenant-id/access-key.
- rawhttp.go: signed raw POST against the AWS gateway for the Phase 8
InvalidAction probe (gateway rejects on auth before action parsing).
- ovn.go: OvnNbctl/OvnSbctl wrappers + SkipIfNoOVN for Phase 8b-e
datapath checks; WaitForPortGroupMember handles propagation polls.
- ec2helpers.go: InstancePublicSSHHost (public-IP-or-qemu-hostfwd),
LsblkRootGiB, serial-console-access trio, DiscoverDefaultVPC,
idempotent AuthorizeSSHIngress.
- account.go: AccountCarousel maps tenant name -> scoped AWSClient,
built atop NewAWSClientWithCreds for the Phase 8 isolation tests.
Pure groundwork — no new tests, no production behaviour change. The
cert + lb scenarios still compile against the extended harness.
* ci(e2e-go): auto-cancel + reap orphans to prevent runner wedge
A cancelled run on the single-runner ci-single host has been leaving
orphan tofu/terraform procs (and stale tfstate locks) behind, which
caused the next push's tofu destroy to hang for 45m+ and saturate the
runner host until sshd refused new connections.
- Add `concurrency: e2e-go-${ref}, cancel-in-progress: true` so a new
push to feat/e2e-go-harness cancels the in-flight run instead of
stacking on the same self-hosted runner.
- New `Reap Orphan Procs` step at job start: SIGTERM then SIGKILL any
lingering `tofu`/`terraform` from the runner user, and unlink any
stale `.terraform.tfstate.lock.info`.
- Harden `Teardown`: drop `set -e` (scrub-env must always run as the
libvirt-level fallback), reap orphans before destroy, and wrap
`tofu destroy` in `timeout 600` so a wedged provider can't pin the
job to its 45m timeout.
* ci(e2e-go): drop push trigger, manual dispatch only
Pull the on.push branch trigger so the workflow only fires from
workflow_dispatch — matches the e2e-ddil.yml Phase-1 pattern. Push
trigger lifts again once the single-node Go port (mulga-siv-89) is
green end-to-end and run-e2e.sh is retired.
* test(e2e-single): port run-e2e.sh phases 1-4 to Go
Stage B of mulga-siv-89. Lands the TestSingleNode orchestrator + Fixture
that threads state between sequential phase subtests, plus phases:
- Phase 1: KVM check, AWS gateway TLS reachability, daemon NATS
readiness polling, region/AZ smoke.
- Phase 1b: spx get nodes / top nodes / get vms (single-node only).
- Phase 2: nano instance-type + arch discovery.
- Phase 2b: serial-console-access default/enable/disable round-trips.
- Phase 3: create-key-pair + import-key-pair lifecycle; test-key-1 PEM
kept for Phase 5 instance launch (cleanup deferred to teardown phase
in stage G).
- Phase 4: architecture-aware AMI discovery via name filter
ami-ubuntu-24.04-{x86_64,arm64}, falls back from spx import output.
Phase ordering is contractual (Phase 5+ depend on AMI, key pair, AZ).
detectPoolMode reads [network] external_mode from spinifex.toml so
stages F/G can skip pool-only phases on dev_networking fixtures.
No production code changed. cert + lb scenarios continue to compile.
* test(e2e-single): port run-e2e.sh phases 5-5e to Go
Stage C of mulga-siv-89 — the instance/volume/snapshot/image lifecycle
that everything else hangs off:
- Phase 5: run-instances (default VPC + default SG with tcp/22 opened
via idempotent harness.AuthorizeSSHIngress), wait running, resolve
root volume from BlockDeviceMappings.
- Phase 5a-pre: spx get vms now contains the running instance.
- Phase 5a: describe-instances metadata round-trip (type/key/AMI/BDMs).
- Phase 5a-ii: TCP wait, ssh id, lsblk cross-check vs API root volume
size (±1 GiB tolerance — lsblk rounds down), soft hostname check.
- Phase 5a-iii: get-console-output round-trip on InstanceId.
- Phase 5b: create-volume (10 GiB) → modify-volume (20 GiB) →
attach-volume → detach-volume → delete-volume, polling each state
transition through harness.WaitForVolumeState.
- Phase 5b-ii: describe-volume-status on the root volume.
- Phase 5c: create-snapshot → wait completed → copy-snapshot → both
visible → delete original → copy survives → delete copy.
- Phase 5d: AMI snapshot-backed launch verification via
DescribeImages.BlockDeviceMappings[].Ebs.SnapshotId. Predastore-side
config.json reads are TODO (no S3 client in harness yet).
- Phase 5e: create-image --no-reboot, wait available, capture backing
snapshot ID for Phase 9 cleanup.
Phase 7a (attach to stopped → error) stubbed in volume_test.go for
Stage D to fill once the lifecycle stop/start lands.
* test(e2e-single): port run-e2e.sh phases 5f-8 to Go
Stage D of the single-node Go port (mulga-siv-89). Adds four files
under tests/e2e/single/ covering Phase 5f (SG egress ACL enforcement),
Phase 6 (tag CRUD), Phases 7 / 7a / 7b / 7c-pre / 7c (stop, start,
attach-to-stopped negative, ModifyInstanceAttribute, reboot, multi-count
RunInstances), and Phase 8 negatives (18 sub-tests asserting AWS error
codes via harness.ExpectError / AssertAWSError / PostAWSAction).
Wired into TestSingleNode in main_test.go; phase ordering preserved
because Phase 7 chain mutates the shared instance state (stopped at end
of 7, .small after 7b, running after 7c-pre, untouched by 7c siblings)
and Phase 8 negatives need a running instance with the AMI/key created
earlier.
Removes the placeholder phase7a_AttachToStoppedError stub from
volume_test.go (real impl now in lifecycle_test.go).
run-e2e.sh stays in tree until step-7 cleanup per the parent plan.
* ci(e2e-go): wire e2e-single target + add single to build set
Lets the in-progress single-node Go port (mulga-siv-89, Stages A-D
landed) be exercised in CI via explicit `suites: e2e-single` dispatch
input ahead of Stage G flipping the workflow default.
Workflow default suites unchanged until Phase 9 teardown lands.
* test(e2e-single): port run-e2e.sh IAM 1-7 + Phase 8 account scoping to Go
Stage E of the single-node Go port (mulga-siv-89). Adds two files
under tests/e2e/single/:
- iam_test.go (903 lines): IAM Phases 1-7 — User CRUD, Access Key
Lifecycle, User Authentication (via harness.NewAWSClientWithCreds),
Policy CRUD (+ CreatePolicyVersion / SetDefaultPolicyVersion /
DeletePolicyVersion which bash lacks), Policy Attachment &
Enforcement (allow / deny / wildcard / root bypass), Policy Lifecycle
(DeleteConflict while attached), and idempotent Cleanup.
- account_test.go (1186 lines): Phase 8 EC2 Account Scoping — 11 Steps
(Account Setup, Instance / Volume / KeyPair / Snapshot / VPC-Subnet /
IGW-EIGW Scoping, Account Settings, Global Resources, Edge Cases,
Cleanup). Uses harness.AccountCarousel for the multi-profile
credential map and SpxAdminAccountCreate for admin account
bootstrap.
Fixture extended with IAM cross-phase state (IAMAdminAccount,
IAM{Alice,Bob,Charlie}{KeyID,Secret}) so Phase 7 cleanup is defensive
even when an intermediate IAM phase short-circuits. All 11 Phase 8
Steps share local state in the outer function; t.Cleanup mirrors
Step 11 LIFO so a mid-Step failure still tears down accounts.
Wired into TestSingleNode. run-e2e.sh stays in tree until step-7
cleanup per parent plan.
* fix(e2e-harness): use kebab-case is-default filter for DescribeVpcs
AWS EC2 DescribeVpcs filter names are kebab-case (is-default), and the
daemon's filter allowlist enforces that. The harness sent the camelCase
SDK field name (isDefault), so the daemon returned InvalidParameterValue
400 and DiscoverDefaultVPC fataled — leaving Phase 5 InstanceID empty
and cascading 16 downstream Single-Node E2E subtests to fail.
* test(e2e-single): port run-e2e.sh phases 8b-8e to Go
Stage F of the single-node Go port (mulga-siv-89). Adds three files
under tests/e2e/single/:
- vpc_test.go (553 lines): Phase 8b (pool-mode VPC public/private
subnet E2E — CreateVpc, dual subnets with MapPublicIpOnLaunch
assertions, IGW attach, custom route table + 0.0.0.0/0 route,
instance launch + SSH + external connectivity probe) and Phase 8c
(route table validation — main RT association, local + IGW route
presence, custom RT CRUD + association/disassociation, negative
delete-local + delete-main assertions).
- natgw_test.go (467 lines): Phase 8d (pool-mode NAT GW E2E —
CreateNatGateway with EIP, private subnet route via NAT, bastion-
hopped SSH into private VM, baseline egress drop / post-NAT egress
succeed / post-teardown egress lost). Inline waitForNATGatewayState
helper bounds the pending->available->deleted state machine via
harness.EventuallyErr.
- datapath_test.go (326 lines): Phase 8e (OVN-gated SG-to-SG datapath
— two SGs with UserIdGroupPair ingress rule, OVN port-group
membership + SB address-set wait loops, allowed traffic curl,
denied traffic nc, revoke->drop, re-add->restore).
Pool-mode gating via fix.PoolMode for 8b/8d; OVN gating via
harness.SkipIfNoOVN for 8e. Per-phase t.Cleanup LIFO ensures
teardown unwinds even on partial failure. Wired into TestSingleNode.
* test(e2e-single): port run-e2e.sh phases 9, 9a, 9b to Go
Stage G of the single-node Go port (mulga-siv-89) — final teardown +
post-teardown verification. Adds tests/e2e/single/teardown_test.go
(226 lines):
- phase9_Teardown: DeleteSnapshot(CustomAMISnapID) -> DeregisterImage
(CustomAMIID) -> TerminateInstances(InstanceID) + wait terminated ->
DeleteKeyPair(KeyName). Each call swallows *NotFound via
harness.ErrorCodeIs; unexpected errors logged as warnings so 9a/9b
always run.
- phase9a_VerifyTeardown: DescribeInstances must show terminated or
NotFound; DescribeImages must NOT include the deregistered AMI;
DescribeKeyPairs must NOT include the deleted key. Clears the
consumed Fixture fields.
- phase9b_FinalClusterStats: harness.SpxGetVMs must NOT list the
terminated InstanceID; orphan i- rows surface as soft Logf warnings
to avoid flakes when parallel suites share the node.
Wired into TestSingleNode. With this, mulga-siv-89's single-node Go
port (Stages A-G) is feature-complete; run-e2e.sh remains in tree
until a separate cleanup bead deletes it after CI burn-in.
* ci(e2e-go): unbuffer sed in test pipeline for live log streaming
GNU sed defaults to block-buffered stdout when stdout is a pipe
(GitHub Actions runner). Accumulates 4-64KB before flushing, so
test output appeared in sporadic batches unaligned to test
boundaries. -u flag forces line-buffered output so each go test -v
line surfaces in the Actions UI as it is produced.
Side effect: none. No process count change, no SSH session change,
no test execution change. Pure output flushing on the runner host.
* fix(e2e-single): persist key PEM across phases and skip unimplemented IAM ops
Three bugs blocked the Single-Node Go E2E suite after the DescribeVpcs
filter fix:
1. Phase 3 wrote the SSH PEM into `t.TempDir()`, which Go cleans up when
the Phase 3 subtest exits. Phases 5a-ii / 5a-iii / 7b / 7c-pre then
saw "Permission denied (publickey)" / "Identity file not accessible"
and the cascade left the instance in a state that broke 7c-pre's
`start-instances`. Move the PEM under a TestSingleNode-scoped
`fix.TmpDir` so it survives until the whole test exits.
2. IAM Phase 2's `require.NotEmpty(t, fix.IAMAdminAccount, "")` was
intended as a no-op (Phase 4 populates the field), but require.NotEmpty
fails on empty regardless of message. Removed the bogus check.
3. The daemon does not yet implement `UpdateUser` (IAM Phase 1) or the
policy-version family (IAM Phase 4): `CreatePolicyVersion`,
`ListPolicyVersions`, `SetDefaultPolicyVersion`, `DeletePolicyVersion`.
They return `InvalidAction` and abort the phase. Wrap each block in a
t.Run sub-test with t.Skip so the surrounding phase still runs and
the skips show up explicitly in the test report.
* test(e2e): parallelise hot phases + tune fast-path polls
Squash merge of feat/e2e-parallel-quickwins (mulga-siv-96). Four
quick wins from decomposing run-e2e.sh into Go phase subtests:
- Phase 8 negatives (single/negative_test.go): t.Parallel() inside
each of the 18 read-only error-path sub-tests. ~5-10x speedup.
- IAM Phase 4 policies (single/iam_test.go): EC2ReadOnly stays
seeded sequentially (populates fix.IAMAdminAccount); the other
four policies fan out as siblings under a wrapping
create_policies_parallel t.Run. ~5x on the Phase 4 sub-step.
- Volume + snapshot fast paths (single/{volume,snapshot}_test.go):
pass harness.WithPoll(500ms) on the five state transitions that
finish in <1s on local QEMU. Halves Phase 5b / 5c wall-clock.
- Cert per-IP loop (cert/cert_test.go): t.Parallel() inside the 4
inner t.Run(ip, ...) blocks. Cuts cert phase by len(nodes).
No harness changes, no Fixture changes, no test-execution-order
changes. mulga-siv-96.
* test(e2e-lb): resolve peer availability before shared fixture setup
setupSharedFixture builds a VPC + 2 app VMs + probe client (minutes
on capacity-tight dev hosts) and previously ran BEFORE the peer
pickup + ssh.Ping. On single-node, the InternetFacing_* subtests
would correctly t.Skip on peer == "" — but only after the fixture
work and once subtests started, so the wait appeared to be attached
to the first subtest name gotestsum printed.
Reorder: pickPeer + ssh.Ping first, log "internet-facing will skip"
immediately, then build the fixture for the internal subtests.
No behavior change for multi-node + peer-reachable; on single-node
the skip rationale surfaces before the fixture wait.
* test(e2e-single): extend SSH wait budget to 3m on slow boot paths
CI run 26034322018 timed out Phase5a_ii_SSH (60s budget) and
Phase8b_VPCSubnetE2E (2m budget) on the TCP-port-open poll while
sshd was still finishing pam/cloud-init. Bump all four wait sites
to 3m as a stop-gap:
- single/instance_test.go phase5aii_SSHProbe
- single/lifecycle_test.go waitForSSHReady (Phase 7b/7c/7c-pre)
- single/vpc_test.go phase8b_VPCSubnetE2E
- single/natgw_test.go phase8d bastion SSH wait
Proper fix tracked under mulga-siv-101 (hoist a harness.WaitForSSH
that probes the actual handshake, not just tcp/22 reachability).
* test(e2e-single): skip-gate IAM3/IAM5/IAM6 until daemon handlers land
CI run 26034322018 surfaced three IAM daemon gaps:
- IAM3_UserAuthentication: alice's freshly-created access key returns
403 from DescribeInstances — daemon doesn't honour scoped IAM key
signatures yet.
- IAM5_PolicyAttachmentEnforcement: cascades from IAM3 (alice can't
sign).
- IAM6_PolicyLifecycle: DetachUserPolicy returns 404 even on
attachments Phase 5 confirmed — daemon attachment ledger gap.
Skip-gate each phase with t.Skip + a pointer to mulga-siv-100 so the
remaining IAM coverage (IAM1/IAM2/IAM4/IAM7) keeps surfacing
regressions, and the suite as a whole doesn't fail on known gaps.
Flip to real assertions once the daemon handlers land.
* test(e2e-single): probe full SSH handshake (not just TCP port open)
CI run 26036025293 hit "Connection timed out during banner exchange"
on Phase5a-ii / 8b / 8d even with the 3m TCP-port-open budget: tcp/22
opens immediately, but sshd is still finishing pam/cloud-init, so the
first real runSSH call afterwards races the half-open daemon.
Switch waitForSSHReady to issue an actual ssh BatchMode + ConnectTimeout
handshake against the target, retrying until the daemon completes the
banner exchange. Drop the four TCP-only Eventually loops in favour of
the upgraded helper:
- instance_test.go phase5aii_SSHProbe
- lifecycle_test.go waitForSSHReady (Phase 7b / 7c-pre / 7c)
- vpc_test.go phase8b_VPCSubnetE2E
- natgw_test.go phase8d_NATGateway (bastion)
Signature: waitForSSHReady(t, host, port, keyPath). Backwards-compat
alias waitForSSHHandshake exposed for the instance_test caller. Proper
harness hoist tracked under mulga-siv-101.
* test(e2e-harness): dual-emit Step + Detail for live CI streaming
go test's testing framework buffers t.Logf output per-test and releases
it only on PASS/FAIL. Long subtests (Phase8Acct_AccountScoping ~115s,
Internal_NLB ~60s, Phase8b_VPCSubnetE2E 2-3m, Phase8d_NATGateway ~90s)
therefore went silent in CI for the entire subtest duration, even with
sed -u line-buffering in the workflow pipeline.
harness.Phase already wrote to os.Stdout directly for this reason.
Extend the pattern: have Step and Detail dual-emit — write the same
line to os.Stdout (streams live) AND t.Logf (keeps JUnit per-test
attribution). The duplicate on a failure is acceptable; both copies
carry identical content.
mulga-siv-103 (note: numbering skipped past siv-102 which was already
filed in the parent branch).
* test(e2e-harness): drop t.Logf duplicate from Step + Detail
The dual-emit (Fprintln + t.Logf) caused every Step/Detail line to
appear twice after long subtests: once live via stdout, once again
when the testing framework released its per-test buffer at
PASS/FAIL. Most visible after lb subtests (Internal_NLB ~60s) where
the bulk release dumped ~dozens of duplicated lines at once.
Drop the t.Logf copy. go-junit-report parses stdout between
`=== RUN` and `--- PASS/FAIL` markers, so per-test attribution in
JUnit XML is preserved without the duplicate.
Refs: mulga-siv-103
* test(e2e-harness): stream lb-waiter progress live in CI
WaitForLBActive, WaitForTargetsHealthy, WaitForENICleanup, and
WaitForInstanceRunning emitted progress via t.Logf, which the
testing framework buffers per-test. After the previous commit
dropped the dual-emit, that meant every poll loop went silent
until subtest end — visible in CI as 'nlb is active' hanging on
screen for the whole duration of the subsequent traffic check.
Route progress through harness.Step (direct stdout). Also emit a
'waiting for X' Step at the start of each helper so observers
know what the silent stretches actually represent.
Refs: mulga-siv-103
* test(e2e): dump VPC/IGW datapath diagnostics on Phase8b SSH timeout
Phase8b's 3min SSH timeout on a fresh-VPC VM (CI run 26037892507) is
the customer-visible surface of mulga-siv-105 — vpcd's handleIGWAttach
returns before ovn-northd compiles + the gateway chassis installs
flows. Two other cleanup-only bugs (siv-106 missing spinifex:cidr,
siv-107 dnat_and_snat double-delete) showed up in the same triage.
Keep the test hard-failing so the regression stays visible, but dump a
triage bundle on timeout so each occurrence is actionable:
- guest console output (last 4KB — boot + cloud-init state)
- ovn-nbctl show + ovn-sbctl show
- Logical_Router external_ids (confirms siv-106 reproduction)
- NAT rules (confirms siv-105 + siv-107 surface)
- Port_Binding chassis,up (confirms gateway port up state)
Diagnostics go straight to stdout (Step/Detail rationale) so they
stream live in CI rather than dumping at PASS/FAIL.
Refs: mulga-siv-105, mulga-siv-106, mulga-siv-107
* ci(junit-report): drop parent t.Run containers from tally + list skips with reasons
GitHub Actions test summary was counting Go's top-level Test* parent
plus its failing subtest as two distinct failures (the parent is just
a rollup of its children). The summary now de-dupes by dropping any
test case whose name is a strict prefix of another's, so the per-file
counts and the Failures block both match the actual leaf-test
outcome. CI run 26037892507 was reporting '2 failed' for single when
it should have been 1.
Also adds a collapsible Skipped section listing each skipped leaf test
with its t.Skipf call-site reason (the .go:<line>: line from the
CDATA). ANSI escapes from harness.Phase banners are stripped so the
reason is plain text. Reasons are useful triage signal — current run
has 9 skips spread across daemon gaps (mulga-siv-100) and pool-mode
gates (InternetFacing_*).
Refs: mulga-siv-89
* ci(e2e-go): propagate cancel to remote .test procs + nuke VM before destroy
Two related leaks made cancelled runs strand QEMU work on the libvirt host:
1. The long `ssh tf-user@VM "for SUITE in …; do ./$SUITE.test"` ran
without -tt, so when the runner cancelled the step the local ssh
died but sshd never sent SIGHUP through (no PTY). The remote
`.test` binary orphaned and kept running until its own 30m
`-test.timeout`, holding tmp dirs, NATS connections, and qcow2 file
handles.
2. Teardown went straight to `tofu destroy` without first killing any
stragglers on the VM, so destroy raced the .test's open file handles
on the root disk — sometimes successfully, sometimes leaving the
libvirt host with a half-released qcow2.
Fix:
- Allocate a PTY on the run-suites ssh (`-tt`) so sshd HUPs children
when the local ssh dies.
- Add a trap (EXIT INT TERM) in the run-suites step that ssh's back
to the VM and pkill's `/spinifex-e2e-bin/*.test` belt-and-braces.
- Mirror the same pkill at the top of Teardown so destroy runs against
a quiesced VM.
Both cleanups are scoped to the per-run wan_ip — safe to land while
multiple ci-single runner agents run concurrent jobs against different
tofu envs on the same host (we deliberately keep that parallelism).
Refs: runner host wedged 2026-05-19 (post-cancel orphans suspected;
no journal access yet to confirm).
* ci(e2e-go): scope orphan reap to GITHUB_WORKSPACE so it spares sibling runners
Reap Orphan Procs (job start) and the in-Teardown pkill block were using
`pkill -u $UID_SELF -x tofu/terraform` plus `find $HOME -maxdepth 6 -name
.terraform.tfstate.lock.info`. The single host runs 5+ self-hosted runners
all as `tf-user`, so every e2e-go run was SIGKILLing in-flight tofu from
sibling workflows (e2e.yml, e2e-ddil.yml, e2e-baremetal.yml, ...) and
deleting their state-lock files — exactly the kind of cross-runner
collateral the reap was meant to recover from.
Scope by `/proc/$pid/cwd` starting with $GITHUB_WORKSPACE; each runner's
workspace dir is unique on the host, so only this run's own tofu procs
match. Find for stale lockfiles is likewise scoped to $GITHUB_WORKSPACE.
* ci(e2e-go): bump setup-go v5->v6, upload-artifact v4->v7
GitHub now warns Node 20 actions are deprecated. e2e-go.yml lagged the
rest of the repo; bump to match versions already in use:
- actions/setup-go@v5 -> @v6 (matches spinifex.yml)
- actions/upload-artifact@v4 -> @v7 (matches release.yml, e2e-ddil.yml)
checkout@v6 and create-github-app-token@v3 are already current across
all workflows. The local junit-report action is `using: composite`
(shell-only), so the Node runtime change does not apply.
* fix(vpcd): add flows-ready barrier after IGW attach (mulga-siv-105)
handleIGWAttach wrote the external switch + gateway port + LRP + default
route to OVN NB and returned immediately, before ovn-northd had compiled
NB -> SB and before ovn-controller on the gateway chassis had installed
the resulting flows. A subsequent RunInstances -> vpc.add-nat could
complete while the datapath was still dark; the launched VM was then
unreachable on its public IP for whatever flow-install latency the
chassis happened to incur. Customer-visible as 'I just created a VPC,
launched a VM, and can't SSH in' for ~minutes.
Reproduced deterministically in CI run 26037892507 Phase8b: a VM in
a fresh VPC was unreachable at 192.168.0.202:22 for 3+ minutes, while
a VM at the same public IP in the warm default VPC (Phase8d) was
reachable in ~40 seconds.
Block at the end of handleIGWAttach on `ovn-nbctl --wait=hv sync`,
which bumps NB_Global.nb_cfg and waits for every connected chassis to
acknowledge the new sequence number — i.e. flows installed. Bounded by
--timeout=30; overruns log a WARN and continue (a 30s OVN stall is
already a deeper problem than failing VPC create would surface).
waitForFlowsHV is a package var so tests can stub it; in environments
without ovn-nbctl on PATH the shell-out fails fast and the WARN path
returns nil, so existing IGW tests stay green without a live OVN.
Refs: mulga-siv-105
* fix(vpcd): store spinifex:cidr on VPC create (mulga-siv-106)
handleVPCCreate built the OVN logical router with only spinifex:vpc_id
and spinifex:vni in ExternalIDs. Cleanup paths (handleIGWDetach + NAT
sweeps) read external_ids['spinifex:cidr'] to scope SNAT removal to
the VPC's own CIDR; when unset, they fell back to an overbroad
10.0.0.0/8 and emitted a WARN.
reconcileVPC already stored the same key at startup; the live-create
path drifted. Add the field to handleVPCCreate, log the cidr alongside
vpc_id, extend TestTopologyHandler_VPCCreate to assert the external_id
is set.
Refs: mulga-siv-106
* fix(vpcd): make handleDeleteNAT idempotent on 'already absent' (mulga-siv-107)
Instance termination fans out through multiple cleanup paths
(instanceCleanerAdapter.ReleasePublicIP AND
VPCServiceImpl.DeleteNetworkInterface), both of which publish
vpc.delete-nat for the same (vpc, logical_ip). The publish is
fire-and-forget (utils.PublishNATEvent uses PublishEvent for
vpc.delete-nat, not RequestEvent), so callers never branch on the
response. The second publisher then triggered a spurious
'ERROR vpcd: failed to delete dnat_and_snat rule ... not found' log
line ms after the first delete succeeded — confusing triage signal
with no actionable consequence.
Add ErrNATNotFound sentinel to the OVN client interface and wrap the
not-found return paths in both LiveOVNClient and MockOVNClient.
handleDeleteNAT matches errors.Is(err, ErrNATNotFound) and treats
that as success (logs INFO 'already absent (idempotent)').
Existing TestTopologyHandler_DeleteNAT_NotFound asserted the opposite
contract; the comment claimed EIP disassociation needed the error
signal, but DisassociateAddress also fire-and-forgets vpc.delete-nat,
so the contract never had a real consumer. Test renamed to
_Idempotent with assertSuccess.
Other failure modes (router missing, OVN unreachable, transact error)
still surface as ERROR + reply with the error string.
Refs: mulga-siv-107
* ci(e2e-go): cluster JUnit failures + name likely root cause (#230)
* ci(e2e-go): cluster JUnit failures + name likely root cause
New composite action `.github/actions/e2e-analyze` runs after
`go-junit-report` converts each suite log. For every `<failure>` it
strips ANSI, normalises dynamic noise (EC2 IDs, UUIDs, IPs, timestamps,
file:line) to a stable signature, picks the earliest non-cascade
failure per suite as the likely root cause, and buckets the rest by
signature. Output is appended to `$GITHUB_STEP_SUMMARY` and written to
`<log-dir>/analysis.md` so it travels with the artifact bundle.
Cascade markers (`must populate fix.`, `Should NOT be empty`,
`Expected value not to be nil`) collapse the typical "one upstream
phase fails, ten downstream `require.NotEmpty` assertions trip" pattern
into a single grouped entry under the real first failure.
The analyser is advisory — it always exits 0. The existing
"Fail job if any suite failed" gate keeps owning exit-code semantics.
Stage 1 of `docs/development/improvements/e2e-go-failure-analysis.md`
(mulga-siv-102). Stage 2 (per-failure log slicing) and Stage 3
(rule-based hints via `tests/e2e/.failure-rules.yaml`, placeholder
seeded here) are independent follow-ups.
CI wiring:
- e2e-go.yml: new "Analyze e2e failures" step between "Publish test
summary" and the artifact upload, always-runs.
- spinifex.yml: new `make test-actions` step so the golden-file tests
under `.github/actions/e2e-analyze/testdata/` run on every PR.
- Makefile: `test-actions` target; kept out of `test-cover` so CI-only
tooling doesn't dilute coverage %.
Golden fixtures: a synthetic cascade-vpcs case (one Phase 5
InvalidParameterValue root + 15 downstream cascades), one real
single-failure case captured from run 26037892507, and a clean
no-failures case.
* ci(e2e-go): per-failure log bundles with time-window slicing
Stage 2 of the e2e failure analyzer. For each failure surfaced by
Stage 1, materialise <log-dir>/analysis/NN-<TestName>/ containing:
failure.txt — summary (test, start, duration, file-site, error)
journal.log — spinifex-journal.log sliced to
[StartAt - 5s, StartAt + Duration + 5s]
test.log — test-<suite>.log block between `=== RUN <name>`
and the matching `--- FAIL` marker
<copies> — any files the harness already dropped at
<log-dir>/<TestName_with_/_replaced>/
Report links each entry to its bundle so a reader on the Actions
page goes straight to the relevant slice.
Workflow now invokes journalctl with --output=short-iso so the
analyzer can parse wall-clock timestamps for the journal window.
Lines without a parseable timestamp inherit the previous line's
classification (keeps multi-line records and stack traces
contiguous).
Render output is unchanged when BundlePath is empty, so the Stage 1
golden snapshots still match.
* ci(e2e-go): restore GOTOOLCHAIN=auto after setup-go v6 bump
setup-go@v6 flipped the GOTOOLCHAIN default from "auto" to "local",
which makes Go refuse to auto-download the toolchain version named
in go.mod. The self-hosted ci-single runner ships /usr/local/go
older than spinifex/go.mod's `go 1.26.3`, and build-install-artifacts.sh
prepends that path so the system Go wins the resolution race. Under
v5 ("auto"), Go silently fetched 1.26.3 on demand; under v6
("local"), the Build Install Artifacts step errors out:
go: spinifex/go.mod requires go >= 1.26.3 (running go 1.26.1; GOTOOLCHAIN=local)
Re-set the env to "auto" so behaviour matches pre-v6 runs.
* ci(e2e-go): re-export GOTOOLCHAIN=auto after setup-go
Workflow-level env doesn't help: setup-go@v6 writes GOTOOLCHAIN=local
to $GITHUB_ENV, which overrides workflow env in every later step.
Add a dedicated step right after setup-go that appends
GOTOOLCHAIN=auto to $GITHUB_ENV so the Build Install Artifacts step
(which uses /usr/local/go from a stale runner path) can self-heal by
fetching the toolchain named in go.mod, matching pre-v6 behaviour.
* fix(vpcd): add flows-ready barrier after dnat_and_snat add
handleAddNAT wrote the NAT rule to OVN NB and returned immediately,
mirroring the gap siv-105 closed for handleIGWAttach but on the NAT
add path. ec2d/RunInstances then returned success while ovn-northd
was still compiling NB->SB and ovn-controller hadn't installed the
DNAT/SNAT flows on the gateway chassis, so the freshly launched VM
was unreachable on its public IP for whatever flow-install latency
the chassis happened to incur.
Reproduced in CI run 26072432957 Phase8b_VPCSubnetE2E: VM at
192.168.0.212 timed out at 3min while diagnostics showed
Port_Binding up=true for both the VM eni and the chassis-redirect
gateway. SB-side convergence was complete; the missing piece was the
same `ovn-nbctl --wait=hv sync` barrier siv-105 added to IGW attach,
applied at the end of handleAddNAT as well.
Reuses the existing package-var `waitForFlowsHV` so tests can stub
it; no new infra. Parallel unit test asserts the call site fires
exactly once per add-nat.
* ci(e2e-analyze): real-artifact fixes for journal slicing
Three bugs surfaced after Stage 2 ran against real CI artifacts in
run 26072432957:
1. Regex `[+-]\d{4}` rejected the colon-offset form (e.g. `+10:00`)
that systemd's `journalctl --output=short-iso` actually emits on
most versions. Added a parser that tries RFC3339 first and falls
back to the no-colon `-0700` layout. Result: 0-line journal slices
become populated.
2. go-junit-report's `timestamp` attr on <testsuite> records the
moment the XML was produced (post-suite), not when the tests
started. Computing StartAt as `that + cumulative-priors` placed
every failure AFTER the journal collection ended, so windows
always missed. Workflow now writes `${ARTIFACT_DIR}/test-<suite>.start`
right before running each suite; analyzer prefers that file over
the junit timestamp.
3. Persisted `OffsetFromSuiteStart` on each Failure so the
suite-start override can recompute StartAt without re-parsing the
XML.
Unit tests added for the colon-offset journal format. End-to-end
test (TestWriteBundles_EndToEnd) still passes with the new layout.
* ci(e2e-analyze): skip parent testcases when summing suite offsets
go-junit-report emits one <testcase> for the parent Go test AND each
subtest, with the parent's time = sum of its children. ParseFile was
summing every testcase into the suite-cumulative-offset counter, so
every leaf's offset was inflated by ~the parent's total duration.
Visible on run 26073817490 as Phase8b's StartAt landing 13 minutes
after the suite finished collecting logs — beyond the journal window,
so the per-failure journal slice was empty.
Pre-compute the leaf set per suite (a name is a leaf iff no other
testcase name starts with `<name>/`) and only accumulate cumul on
leaves. Golden snapshots updated; the offset for the only failure in
each fixture now matches the actual leaf-sum start time.
* test(e2e-harness): capture IP-targeted datapath state on Phase8b SSH fail
Phase 1 diagnostics for mulga-siv-111. The Phase8b SSH timeout
reproduced on the e2e-failure-analysis branch with siv-105's IGW
barrier AND the new add-nat barrier BOTH firing cleanly, so the
residual gap is downstream of `--wait=hv sync` — most likely stale
OVS conntrack, stale upstream-host ARP, or an OF flow-install miss.
DumpVPCFlowDiagnostics now takes a VPCDiagnosticsOpts carrying the
external IP, logical IP, and per-test artifact dir. When set, the
helper greps `ovs-ofctl dump-flows br-int`, `conntrack -L`, and
`ip -4 neigh show` for the external IP / logical IP and snapshots
`ovn-nbctl find NAT external_ip=…`. Each capture is both printed
inline (existing affordance) and written to a separate file under
fix.Artifacts so the Stage 2 analyzer bundler picks it up alongside
the journal + test-log slices, no analyzer changes needed.
Phase8b's caller now passes pubIP / privIP / fix.Artifacts so the
captures fire on the next failure; updates the t.Fatalf message to
point at siv-111 instead of siv-105 (which is the now-closed parent).
* fix(e2e-single): authorize SSH ingress on fresh-VPC default SG in Phase8b
Phase 8b stands up a non-default VPC and runs an instance there. Its
auto-created default SG denies all ingress, so the SSH probe times out
even when every datapath barrier converges — OF flow captures show the
SYN reaches OVN, gets DNAT'd at table 13, then drops at the ACL between
tables 13 and 17. The bash driver relies on admin init having pre-baked
this rule on the *default* VPC's default SG; a fresh VPC has not.
Add a DescribeSecurityGroups + AuthorizeSSHIngress step between
route-table setup and run-instances, using the existing harness helper.
Fix surfaced via mulga-siv-111's Phase 1 diagnostics (OF flow + ACL
drop counts), invalidating the H1/H2/H3 stale-state hypotheses in the
bead plan doc.
* test(e2e): dual-detect ubuntu image version (24.04/26.04) during gold-image transition
After mulga gold image bumped to v6-fastboot (stages ubuntu-26.04 / resolute
instead of ubuntu-24.04 / noble), all consumers that hardcoded 24.04 break on
the new image. Make them detect at runtime so v3 and v6 envs both pass.
- tests/e2e/run-e2e.sh: DescribeImages filter accepts both
ami-ubuntu-{26,24}.04-<arch>, then derives IMAGE_NAME from the match.
- tests/e2e/run-pseudo-multinode-e2e.sh: prefer ~/images/ubuntu-26.04.img,
fall back to ubuntu-24.04.img; pass detected version to spx import.
- tests/e2e/single/image_test.go: walk candidate catalog names (26.04 first,
then 24.04), stop on the first one DescribeImages can resolve.
- .github/workflows/e2e-baremetal.yml: download resolute (26.04) into
BM_ISO_CACHE; update BM_UBUNTU_IMAGE env var path.
- docs/terraform-workbooks/{bastion-private-subnet,s3-webapp,nginx-webserver}:
AMI filter matches `*ubuntu-26.04*` OR `*ubuntu-24.04*` (AWS values=
array is ORed).
Companion changes for mulga (bootstrap scripts, baremetal, iso pipeline)
land in scripts/tofu-cluster/* and scripts/{tofu-iso,baremetal,iso-builder}/*
under bead mulga-siv-114. Drop the 24.04 fallbacks once all envs are on the
v6 gold image and 24.04 entries are removed from spinifex/utils/images.go.
* feat(e2e): add service-interfaces.yaml manifest + validator
Source of truth for which spinifex services produce/consume which NATS
subjects, and which e2e suites cover which services. Consumed downstream
by the targeted suite selector (Bead 4) to derive subset E2E runs from a
PR diff so single-service changes stop paying the full 25 min suite cost.
- docs/service-interfaces.yaml: 7 services, 4 active suites (cert, lb,
single, ddil). Subscribes / publishes / depends_on filled from grep
of NATS subjects in source. spinifexui marked covers_no_suite so
UI-only diffs skip e2e entirely. Future suites (multinode, reboot,
tofu, baremetal) commented in until Go ports land.
- tests/e2e/manifest-check: schema + cross-reference validator (path
existence, subject regex, duplicate detection, suite covers resolves
to a real service, fixtures references resolve). 8 unit tests cover
the failure modes plus a load-and-validate on the real manifest.
- Makefile: manifest-check target, hooked into preflight.
- docs/DESIGN.md: link to the manifest under "NATS Messaging".
mulga-siv-116. See docs/development/improvements/e2e-targeted-suite-selection.md.
* fix(e2e): drop catalog-download import path from phase4_Image
`spx admin images import --name ubuntu-26.04-x86_64` with wantErr=true
was meant to detect that bootstrap-install.sh already imported the AMI
and short-circuit on the duplicate exit code. After the v6 gold-image
bump preloaded `~/images/ubuntu-26.04.img` and bootstrap-install.sh
switched to `--file` for the import, two things broke at once:
- The catalog `--name` path no longer hits a duplicate guard for the
--file-imported AMI, so the import re-downloads ~857MB and either
succeeds (failing the wantErr=true assertion) or wedges the job
timeout while the catalog server crawls along at 16KB/s.
- `--file` from the test won't work either: the test binary runs as
`tf-user` over SSH, while bootstrap-install.sh placed the image at
`/home/spinifex/images/...` (mode 0700 home dir).
bootstrap-install.sh is already responsible for staging the AMI. The
test's job is verifying DescribeImages round-trips by-name and by-ID —
not re-exercising import. Trust the bootstrap-staged AMI and stop
calling import.
Keeps the 26.04→24.04 dual-detect for the v3 gold image transition;
drop the 24.04 candidate when no envs remain on v3.
Refs mulga-siv-115 (caught by the EC2 cold-boot fast-path E2E run on
feat/ec2-coldboot-fastpath).
* ci(e2e-go): default to e2e-single + harden status-report SHA fallback
Two changes to .github/workflows/e2e-go.yml:
1. Default `suites` input now includes e2e-single so a no-input
manual dispatch exercises the full single-node ladder. Single-node
Go harness is greenable now (image_test fix at
|
||
|
Julian Sommer
|
20a8a39608 | feat: flip images to UEFI default (#237) | ||
|
Josh Siviour
|
4ae2a4ac53 |
feat(elbv2): QEMU microvm direct-boot for LB system instances (#228)
* feat(vm): direct-boot foundations + config/input extensions + image build pipeline
vm package (mulga-siv-62):
- Add KernelImage, Initrd, KernelCmdline, FwCfg/FwCfgEntry to vm.Config
- Emit -kernel/-initrd/-append/-fw_cfg args when fields set
- Relax drive invariant: accept kernel image in place of drives
- Add devices.go: IsMMIO predicate, NetDevice/BlkDevice/RngDevice helpers
- Refactor lifecycle.go + network_helpers.go call sites to use helpers
- shutdown.go: os.Remove fw_cfg tmpfiles after QEMU exits
- Add devices_test.go, microvm_test.go; extend vm_test.go
config/input extensions (mulga-siv-63):
- Add MicrovmConfig{ELBv2Enabled, ImagePath} to DaemonConfig
- ImagePath falls back to /usr/share/spinifex/microvm when empty
- Add commented [microvm] section to spinifex.toml template
- Add DirectBoot bool + NICs []NICConfig to SystemInstanceInput
image build pipeline (mulga-siv-64):
- scripts/build-microvm-image.sh: Alpine chroot build producing vmlinuz + initramfs.cpio.gz
- build/microvm/init.sh: fw_cfg-driven PID 1 init (mounts, modprobe, NIC config, lb-agent-env, ca-cert)
- build/microvm/inittab: BusyBox init with lb-agent respawn
- make build-microvm-image target
- setup.sh: install microvm/* to /usr/share/spinifex/microvm/
- .gitignore: exclude built vmlinuz + initramfs.cpio.gz artifacts
* feat(daemon): direct-boot launch path for microvm system instances
When SystemInstanceInput.DirectBoot=true:
- Skip GetAMIConfig and GenerateVolumes
- Build vm.Config directly (no buildBaseVMConfig, no PCIe root ports)
- MachineType=microvm,x-option-roms=off,pic=off,pit=off,rtc=on,acpi=on,isa-serial=on
- Resolve kernel/initrd from Microvm.ImagePath config field
- Serialise NICs to three fw_cfg tmpfiles (netcfg, lb-agent-env, ca-cert)
- Validate exactly one NICConfig.IsDefault=true before writing netcfg blob
- Shutdown path cleans up tmpfiles via existing Config.FwCfg iteration
PC-machine path (DirectBoot=false) unchanged.
Closes mulga-siv-65
* feat(elbv2): wire microvm.elbv2_enabled flag into ELBv2 service
When ELBv2Enabled=true:
- Drop lbVMUserData cloud-config; emit KEY=value LBAgentEnv blob instead
- Set SystemInstanceInput.DirectBoot=true; omit ImageID
- Populate NICs []NICConfig (index 0=primary ENI IsDefault, 1=mgmt, 2+=extra ENIs)
- Validate exactly one IsDefault NIC at service layer
When ELBv2Enabled=false: existing PC-machine path unchanged.
Adds buildLBAgentEnv, buildMicrovmNICs, subnetCIDRForIP, subnetGatewayIP helpers.
Tests in arn_test.go cover both flag-on and flag-off paths.
Closes mulga-siv-66
* test(daemon,vm): add unit tests for direct-boot helpers to meet diff coverage threshold
* feat(daemon): Phase 1 perf instrumentation + e2e runner microvm flag
- Log t1→t2 boot timing via slog on the direct-boot path
- measureQEMURSSMiB helper reads /proc/<pid>/status (tested)
- Gate constants: phase1BootGateMs=500, phase1RSSGateMiB=25
- run-lb-e2e.sh: --microvm flag, dual-path CI annotation, density test note
Closes mulga-siv-67
* fix(build): remove busybox-initscripts — not in Alpine 3.20, not needed
* fix(microvm): end-to-end fixes for direct-boot LB path
Serial output was silent (x-option-roms=off suppresses BIOS serial init);
fixed by removing it from the machine string and using -serial chardev:console0
to attach to the machine-created ISA serial device instead of adding a
duplicate isa-serial device (which would create ttyS1 while kernel uses ttyS0).
virtio-net interfaces were invisible to the kernel because QEMU's
auto-kernel-cmdline does not append virtio_mmio.device= params when -append
is used. Fixed by generating explicit virtio_mmio.device=0x200@0xfebNNNNN:N
params for each NIC in KernelCmdline, and modprobing virtio_mmio + virtio_net
in init.sh.
sys.micro bumped to 512 MiB — 128 MiB caused kernel OOM during initramfs
decompression (~68 MiB uncompressed).
BusyBox init ::respawn: entries do not source or export env files; fixed
inittab to use set -a; . /etc/conf.d/lb-agent; set +a before exec.
wireLBAgentConfig was documented as reading the CA cert but never set
elbv2Service.CACert; lb-agent TLS handshakes to AWSGW failed with
x509: certificate signed by unknown authority. Fixed by reading
d.config.NATS.CACert (same local CA that signs the AWSGW server cert)
and assigning to elbv2Service.CACert so writeFwCfgBlobs writes a
non-empty cacert blob into fw_cfg.
Adds vm_test TestExecute_MicrovmFileChardev and updates lifecycle_test
to assert SerialSocket is intentionally empty on direct-boot VMs.
* fix(build): auto-detect docker/podman when apk unavailable for microvm image build
* fix(build): create /dev/console and /dev/null as proper device nodes in initramfs
tar extraction without root silently demotes device files to 0-byte regular
files (mknod requires CAP_MKNOD). The kernel opens /dev/console when wiring
init's stdio to the serial console; a regular file there causes all init output
to be silently discarded to RAM — the VM appears stuck at 'Run /init as init
process' with no subsequent console output and lb-agent never heartbeats.
Fix: after rootfs population, wipe /dev and recreate console (c 5 1) and
null (c 1 3) via sudo mknod. devtmpfs provides all other devices at runtime
once init.sh mounts it.
* fix(microvm): fix mgmt NIC routing for all LB schemes
Two bugs prevented lb-agent from reaching the AWSGW via the mgmt interface:
1. RouteDst/RouteVia swapped — resolveMgmtRoute returns (gateway, target) but
buildMicrovmNICs assigned them as (Dst=gateway, Via=target), producing
'ip route add 10.15.8.1 via 192.168.1.33' instead of the correct
'ip route add 192.168.1.33 via 10.15.8.1'.
2. NIC[1] MAC and CIDR never filled — the daemon allocates mgmt IP/MAC
after buildMicrovmNICs returns, but didn't inject them into input.NICs[1]
before calling writeFwCfgBlobs, leaving NIC1_MAC= empty in the netcfg
blob and skipping interface setup in init.sh entirely.
Also extends mgmt routing to internet-facing scheme in the microvm path:
VPC SNAT is not reliable across all VPC topologies for control-plane
heartbeats; mgmt is always a direct L2 path to the host.
* feat(microvm): Phase 2 kernel stripping + boot optimisation
- cpu: switch to host,-pmu (disable PMU — not needed in microvm guest)
- machine type: make isa-serial configurable via microvm.isa_serial config
field; default true (on) preserves console log path
- build: strip unused kernel modules (USB, IDE, ATA, GPU, media, input,
HID, bluetooth, staging, sound, wireless) from initramfs before cpio
- build: add Phase 2 artifact size gate — fail if vmlinuz + initramfs.cpio.gz
exceeds MICROVM_ARTIFACT_MAX_MiB (default 50 MiB); override via env var
during development
- perf: add phase2BootGateMs=300 and phase2ArtifactGateMiB=50 constants
with canary tests to catch unintentional gate changes
- tests: cover buildMicrovmNICs nil-VPC and extra-ENI paths
- tests: cover microvmMachineType nil/true/false branches
* fix(build): use find-based virtio+fw_cfg module keep-list in initramfs strip
The directory-only keep-list (drivers/virtio, drivers/firmware) missed
virtio_net.ko which lives in drivers/net/, virtio_blk in drivers/block/,
and virtio-rng in drivers/char/hw_random/. Switch to find-based approach:
collect all virtio*.ko* and *fw_cfg*.ko* regardless of subdirectory, then
restore them into their original relative paths under kernel/.
Artifacts now: 42 MiB (vmlinuz 11 MiB + initramfs 31 MiB), gate passes.
* fix(build): keep failover modules in initramfs strip
virtio_net depends on net_failover/failover for live-migration support.
Stripping them left virtio_net with unresolved symbols
(net_failover_create/destroy), so the module failed to load and the
guest came up with only lo. init.sh then skipped every NIC ("no
interface found for MAC ..."), leaving lb-agent with no network path
to AWSGW and the LB stuck in provisioning.
Add *failover*.ko* to the keep-list. Image size unchanged at 42 MiB
(under the 50 MiB Phase 2 gate). ELBv2 e2e now reaches active and
2/2 targets healthy for both ALB and NLB internal LBs.
* fix(daemon): restore slog default after viperblock.New mutates it
viperblock.New unconditionally calls vb.SetDebug, which calls
slog.SetDefault with a TextHandler at LevelError — globally silencing
every slog.Info and slog.Warn in the caller process for the rest of
its life. Discovered while validating microvm Phase 2 (mulga-siv-68):
the daemon stopped emitting Info logs the moment the first customer
VM with volumes launched, hiding direct-boot timing,
LaunchSystemInstance completed, and CreateLoadBalancer completed
lines that we need for boot-time tuning.
Workaround in newViperblock: re-install an Info-level TextHandler on
os.Stderr after each viperblock.New call. Also drop the three explicit
vb.SetDebug(false) calls in prepareRootVolume / prepareEFIVolume /
prepareCloudInitVolume — they were no-ops (viperblock.New already
runs SetDebug internally) and each one re-triggered the global
mutation we are trying to undo.
Proper fix is in viperblock itself — tracked as mulga-siv-70: SetDebug
should not call slog.SetDefault. Until then, this restore call is the
shortest path to getting the daemon's observability back so we can
measure t1_to_t2_ms and tune Phase 2.
Preflight note: golangci-lint not available on this dev host, so the
project preflight target cannot run end-to-end. Verified with
go vet ./spinifex/handlers/ec2/instance/... (clean) and
go test ./spinifex/handlers/ec2/instance/... (pass).
* perf(microvm): hit Phase 2 boot/memory gates
t1→t2 hypervisor: 3224 ms → 264 ms (12×). 128 MiB guest now boots
cleanly without OOM, reverting the temporary 512 MiB bump.
Root causes:
1. build-microvm-image.sh staged the entire chroot into the cpio
without dropping /boot, embedding a duplicate vmlinuz, Alpine's
stock initramfs-virt, System.map, and a "boot → ." symlink loop
(~25 MiB). Decompression peak exceeded 128 MiB. Strip /boot after
the kernel is copied out, before the cpio. Initramfs drops from
31 MiB → 11 MiB (53 MiB → 28 MiB uncompressed); total artifact
42 MiB → 22 MiB.
2. vm/lifecycle.go burned 3 s of fixed sleep on every direct-boot
launch: 2 s nbdkit pre-exec wait (no nbdkit on direct-boot) and
1 s post-fork settle (QEMU binds QMP within ~10 ms when there is
no firmware, ROM, or block layer). Both extracted to
directBoot-aware helpers — nbdkitPreExecWait collapses to 0, and
qemuStartSettleWait to 50 ms.
3. KernelCmdline only carried `console=ttyS0 virtio_mmio.device=…`.
Added boot-time perf flags: quiet loglevel=3 (silence printk over
115200-baud isa-serial), mitigations=off (KVM guest on trusted
host, single-tenant LB workload), tsc=reliable, no_timer_check,
reboot=t, i8042.{nopnp,noaux,nokbd} (microvm has no PS/2).
4. init.sh dropped modprobe virtio_mmio (built-in:
CONFIG_VIRTIO_MMIO=y) and tightened polling: fw_cfg/iface waits go
from 10 × 200 ms (up to 2 s) to 5 × 20 ms (up to 100 ms).
Phase 2 gates:
- t1→t2 ≤ 300 ms ✅ 264 ms / 281 ms
- artifact ≤ 50 MiB ✅ 22 MiB (gate already in build script)
- ELBv2 e2e green ✅ 32/33 (pre-existing client-VM failure,
unrelated to microvm path)
* build(microvm): wire build into deploy + distro + release pipeline
Adds install-microvm Makefile target (with grouped-target staleness
detection on vmlinuz/initramfs.cpio.gz), wires it into dev-install.sh
and reset-dev-env.sh, makes 'make deploy' reinstall artifacts when
present, and makes 'make distro-amd64' stage build/microvm/* into the
release tarball staging dir. arm64 distro stays unchanged (no aarch64
microvm artifact yet — Phase 4).
Release workflow gains a setup-go step and a 'make build-microvm-image'
step before 'make distro-amd64' on the amd64 runner so the resulting
tarball includes the kernel + initramfs without a manual copy.
Precursor for the Phase 3 PC-machine LB removal (mulga-siv-69).
Closes mulga-siv-71.
* build(ansible): include microvm artifacts in build role tarball
Adds a build-microvm-image task to the ansible build role and stages
build/microvm/* into the role's release tarball so the install role's
setup.sh run picks them up via INSTALL_SPINIFEX_TARBALL. Skipped
gracefully when the build script is absent (older branches without
direct-boot LB wiring).
* feat(config): enable microvm direct-boot LB path by default
Uncomments the [nodes.<node>.daemon.microvm] section in the generated
spinifex.toml template and sets elbv2_enabled = true so all new
clusters bring up ELBv2 LBs via the direct-boot microvm path. Operators
can opt back to the legacy PC-machine path by flipping the flag to
false in the rendered config.
Required for end-to-end CI on this branch to exercise the direct-boot
path. Existing clusters' configs are unchanged (the template only
affects fresh 'spx admin init' renders).
* fix(microvm): bootstrap apk.static when no host rootfs tool exists
Self-hosted CI runners and the GitHub-hosted ubuntu-24.04 image often
have none of apk, docker, or podman installed. apk-tools is not in the
Debian 13 (trixie) repositories. Without one of these the rootfs build
fails up front with 'no rootfs build tool available'.
When all three are absent, fetch apk-tools-static from the configured
Alpine mirror, extract it to a tempdir, and prepend it to PATH so the
existing native-apk strategy below picks it up transparently. Requires
only curl + tar, both of which are present on every CI runner that can
already check out source.
No-op when apk, docker, or podman is already present.
Unblocks https://github.com/mulgadc/spinifex/actions/runs/25988830244
* revert: drop apk.static bootstrap in build-microvm-image
Reverts 0bd76b7. Self-hosted runners will get docker.io installed
out of band; existing Strategy 2 (docker run alpine:3.20) handles
the rootfs build without host sudo or unsigned package install.
* docs(workbook): drop lb-alpine import for microvm direct-boot LB
LBs now launch via direct-boot QEMU microvm using kernel + initramfs
bundled at /usr/share/spinifex/microvm/, so the legacy lb-alpine system
AMI import is no longer required.
* fix(daemon): own tap devices by daemon user so QEMU can attach without CAP_NET_ADMIN
When the daemon runs non-root (production: User=spinifex-daemon), child
QEMU processes inherit that uid but lack CAP_NET_ADMIN. The kernel's tun
attach check then requires the tap owner uid to match the caller's euid.
Without the `user` flag, `ip tuntap add` defaults to root:root and qemu's
TUNSETIFF fails with EPERM ("could not configure /dev/net/tun: Operation
not permitted").
Surfaced by the e2e-nightly cell-17 microvm LB launch on the ci-pseudo
runner where the kernel enforces strictly; legacy EC2 launches on
ci-single runners happened to attach successfully despite the same code
path. Adding `user $current group $gid` to `ip tuntap add` ensures the
tap is owned by whatever uid the daemon (and its qemu children) run as.
Root daemons skip the flag — they have CAP_NET_ADMIN ambient.
* fix(e2e): redirect lb probe chatter to stderr so stalls are visible
test_http_from / test_tcp_from echoed progress to stdout, which the
callers captured into *_OK vars via $(...). Result: 6+ minute retry
loops ran silently in CI, and the "$ok" comparison never matched
"true" because the captured value contained the full multi-line
chatter. Reachability pass/fail counters were also lost in the
subshell.
Redirect helper output to stderr, leave only the true/false flag on
stdout, and move pass/fail to the caller so they actually count.
* fix(microvm): don't /32 AdvertiseIP via mgmt for internet-facing single-node
buildMicrovmNICs overrode resolveMgmtRoute's deliberate empty return
for the single-node internet-facing case by falling back to
(MgmtBridgeIP, AdvertiseIP). That installed a /32 route to AdvertiseIP
via the mgmt NIC inside the LB microvm. On single-node where the
AWSGW host IP equals the WAN client IP, the /32 also catches reply
traffic for inbound HTTP/TCP to the LB's floating IP — replies leave
via the mgmt NIC with src=data-NIC IP, the host kernel drops the
asymmetric flow, and same-chassis ingress hangs.
resolveMgmtRoute already encodes the correct policy:
- multi-node any scheme → explicit MgmtRoute{Gateway,Target}
- single-node internal → fallback to (MgmtBridgeIP, AdvertiseIP)
- single-node internet-facing → empty (reach AWSGW via VPC SNAT)
Honor it. Matches the legacy lbVMUserData path, whose own comment
flagged the stolen-WAN-return-path symptom this introduced.
Test covers all three branches.
* feat(ansible): dev-deploy playbook for in-place artifact swap
Fills the gap between ansible-dev-install (skips when already installed)
and ansible-dev-reset (full teardown + reinstall + smoketest). Mirrors
Makefile `deploy` target: rebuild + replace binaries and microvm
artifacts on a running node, restart spinifex.target, wait for awsgw.
Skips setup.sh (no user/dir/systemd-unit changes) and smoketest so
iteration is fast. Use ansible-dev-reset when changing systemd units,
helper scripts, logrotate, or setup.sh itself.
Adds:
- roles/deploy/tasks/main.yml — install spx + nbdkit plugin + microvm
artifacts, with plugindir auto-detection via `nbdkit --dump-config`.
- playbooks/dev-deploy.yml — chains build + deploy roles.
- Makefile ansible-dev-deploy target.
- README playbook table + "when to use which" guidance.
* chore(microvm): remove legacy LB Alpine image build pipeline
Phase 3 microvm removal — strip the PC-machine LB image build
artifacts that direct-boot no longer needs. The microvm initramfs
already carries lb-agent + HAProxy via build-microvm-image, so the
lb.conf manifest, lb-setup.sh chroot script, build-lb-image target,
dev-install / reset-dev-env import steps, and ansible LB-image tasks
all become dead.
build-system-image stays — other manifests (e.g. GPU images) still
use it.
* refactor(microvm): remove legacy PC-machine LB boot path
Phase 3 — direct-boot becomes the only ELBv2 LB launch path.
- Drop SystemInstanceInput.DirectBoot / ImageID / UserData (every LB
caller set DirectBoot=true; legacy cloud-init userdata is gone).
- Drop ELBv2ServiceImpl.lbVMUserData, systemAMI* fields, SetSystemAMIFunc,
getSystemAMI, and the lazy-AMI wiring in daemon.startCluster.
- Collapse CreateLoadBalancer to a single direct-boot launch input.
- Collapse daemon.LaunchSystemInstance: drop AMI validation, ImageID
on RunInstancesInput, UserData base64 encode, GenerateVolumes branch.
buildDirectBootConfig hardcodes /usr/share/spinifex/microvm and
isa-serial=on (microvmMachineType no longer takes a flag).
- Drop MicrovmConfig from config.DaemonConfig and the
[daemon.microvm] section from the spinifex.toml template.
- Prune dead tests (lbVMUserData_*, PCMachine_Unchanged, AMI resolver
paths) and refresh stale comments that still mentioned lbVMUserData.
ARM hosts have no LB launch path until Phase 4 adds direct-boot on
virt — CreateLoadBalancer on aarch64 fails naturally at QEMU exec.
* docs: drop lb-alpine catalog entry from cluster setup guide
LB system instances no longer use an AMI — direct-boot microvm
artifacts ship in the spinifex package.
* feat(ui): remove LB image import banner + LB-AMI gating
Direct-boot microvm artifacts ship in the spinifex package, so the
LB system AMI no longer exists — the "Load balancer image not imported"
banner and the Create-button disable on the LB list / wizard pages
can never fire. Strip:
- lb-image-missing-banner.tsx component
- hasLbImage / isLbImage / LB_IMAGE_NAME / LB_MANAGED_BY_VALUE from
system-managed.ts (isSystemManagedImage stays — still used by the
EC2 Images pages to hide system AMIs)
- Banner gating + ec2ImagesQueryOptions imports from the LB list and
wizard pages
- The corresponding tests that asserted the banner appears
* revert: restore lb.conf + lb-setup.sh for mulga install pipeline
Phase 3 microvm removal (commit
|
||
|
Julian Sommer
|
0dc0daf116 | feat: use FIPS compliant cryptography (#225) | ||
|
Julian Sommer
|
6f3e901b9f | chore: use go 1.26.3 | ||
|
Josh Siviour
|
b7dea45ee0 |
feat: Ansible dev lifecycle (parallel to bash scripts) (#178)
Playbooks for preflight / teardown / install / reset covering the same ground as dev-install.sh, dev-setup.sh, reset-dev-env.sh. Existing bash scripts untouched — decide which to keep after parity testing. - roles/teardown + teardown catalog README track every known state source; add a task + row when a leak is reported. - roles/init gates smoketest on awsgw readiness (describe-regions poll). - roles/smoketest is dup-tolerant, retry-wrapped, auto-terminates the launched instance. - dev-install.yml skips build/install/init when a healthy environment is already present (4-signal health check), always runs smoketest. - dev-reset.yml captures region/az/external-mode scalars from the existing spinifex.toml and replays them into init. Plan: docs/development/improvements/ansible-dev-lifecycle.md (mulga). Bead: mulga-siv-9. |
||
|
Ben Duncan
|
1d38311e07 | main merge |