mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-15 17:11:30 +00:00
51706938e8a895978022558150a117b2dd0ab6a8
164 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Julian Sommer
|
51706938e8 | chore: use ubuntu-26.04 runners | ||
|
tomnewton-mulga
|
879cfde07a | fix: more docs tweaks | ||
|
Julian Sommer
|
003b2bc420 | chore: switch to single default PR template | ||
|
Julian Sommer
|
29ff386af2 | chore: add PR Templates | ||
|
Josh Siviour
|
41dc53b7f8 |
fix(ci): prevent stale suite-status from false-failing e2e re-runs (#387)
The per-run ARTIFACT_DIR lives in /tmp, outside GITHUB_WORKSPACE, so a re-run on the same self-hosted runner reused a prior attempt's append-only suite-status.txt. The 'Fail job if any suite failed' gate's -s check then failed the job even when the surviving attempt passed with rc=0. Wipe ARTIFACT_DIR in Clean Workspace and gate solely on the per-attempt steps.e2e.outputs.rc (fail-closed: an empty rc still fails). |
||
|
Julian Sommer
|
28c6e8ccff | chore: bump CI time | ||
|
tomnewton-mulga
|
42db84184d | Merge branch 'dev' of github.com:mulgadc/spinifex into dev | ||
|
tomnewton-mulga
|
a396e1bd30 | updating SMCI docs | ||
|
Julian Sommer
|
eced3f733a | feat: split IAM e2e (#372) | ||
|
Julian Sommer
|
058da3eff4 | fix(viperblockd): seal volume block-map to predastore on detach + durability e2es (#371) | ||
|
Josh Siviour
|
17c83cb3ad |
fix: build microVM rootfs via buildx to stop overlay2 export leak (#358)
docker export of a container leaks its overlay mount on Docker's overlay2 driver — the mount survives docker rm, so the layer dirs are never reaped except by a daemon restart. The lb-agent microVM build ran docker export on every e2e job across ~9 runners, accumulating ~69G of orphaned overlay2 layers on the CI host (disk hit 94%). Build the rootfs with `docker buildx --output type=local` from a small generated Dockerfile instead, which writes the image filesystem to a directory and releases all mounts — nothing leaks. Keep the podman path (its store is unaffected). Tighten the e2e cleanup image prune to dangling-only so the alpine base stays cached instead of re-pulling. |
||
|
Julian Sommer
|
c6c26c04e2 | chore: trim workflow comments | ||
|
Julian Sommer
|
2df35d3822 | chore: remove reboot e2e | ||
|
Josh Siviour
|
d076a434d4 |
Feat/e2e targeted suites (#352)
* test(e2e): add targeted suite selector + shadow-mode CI step
select-suites maps a diff to the e2e suites it must run: changed files →
services (manifest path/additional_paths) → consumer closure over
depends_on vs publishes/subscribes → suites whose covers intersect.
Special cases force-all (infra/harness/workflow, ≥3 services, submodule
bumps) or a lone suite dir; empty diffs fall back to default suites. An
AST scan of each suite's harness.Ensure* call graph derives per-test
service coverage and emits an optional -test.run subset (RUN_PATTERN).
Wired into e2e.yml as a non-gating 'Select Suites (shadow)' job that
logs the computed selection to the run summary so predicted vs actual
can be compared before the selector drives SUITES.
* ci(e2e): add dispatch-only per-suite job blocks grouped by env
Restructure the looped e2e flow into env-grouped provision -> matrix
suites -> teardown blocks so each suite surfaces as its own node in the
Actions graph instead of a single green tick:
single_provision -> single_suite [single,cert,lb,eks] -> single_teardown
multi_provision -> multi_suite [multinode] -> multi_teardown
Provision resolves the VM/cluster and ships test binaries, emitting WAN
IP + ssh key path as job outputs; each matrix leg runs one suite over
SSH and uploads its own junit/analysis artifacts; teardown (if:always)
reuses the persisted tofu workspace on the same runner to destroy.
workflow_dispatch only -- runs alongside the gating e2e.yml for
validation and posts no commit status.
* test(e2e): add manifest drift lint (fixture-create + NATS subject)
Bead 5 of the targeted-suite-selection plan. Two ratcheted drift guards in
tests/e2e/manifest-lint, wired into make preflight and the spinifex.yml PR job:
- Fixture lint: AST-flags direct resource-create AWS calls
(c.EC2.RunInstances, c.ELBv2.CreateLoadBalancer, ...) in suite test files,
steering them through harness.Ensure* fixtures. ~104 pre-existing call sites
are captured in a checked-in baseline; the lint fails only on NEW creates.
Intentional create-path tests opt out with an inline // e2e:allow-create.
- Subject lint: extracts NATS subject literals from the natsSub{} registry and
literal Subscribe/Publish/Request args, cross-referenced wildcard-aware
against service-interfaces.yaml. Code subjects missing from the manifest fail
(ratcheted); manifest subjects with no static reference warn only (many are
produced dynamically). Fixed real drift surfaced on first run: declared the
five spinifex.cluster.shutdown.* phase subjects under spinifex_daemon.
manifest-check is now CI-enforced alongside manifest-lint (previously
preflight/local-only).
* feat: run-scoped e2e teardown sweep
Tag every Ensure* fixture resource with e2e:run=<run-id> when
SPINIFEX_E2E_RUN_ID is set, and add a teardown.test suite that sweeps
everything carrying that tag at end of run — reclaiming resources leaked
by a crashed suite, an interrupted run, or a persistent cluster.
- harness/sweep.go: tagRunResources (EC2 CreateTags) + tagRunELB (ELBv2
AddTags) + SweepRunResources in dependency order (LB, instances, NAT,
snapshots, volumes, images, SGs, subnets, key pairs). Blank run id
no-ops both tagging and sweeping, so the sweep can never touch an
untagged or foreign resource.
- harness/fixtures.go: stamp the run tag on each created resource.
- tests/e2e/teardown: thin suite that runs the sweep; skips without a
cluster or run id, logs the report, never fails the run.
- e2e-suites.yml: build + ship teardown.test, pass the run id into suite
legs, sweep on the VM in both teardown jobs before tofu destroy.
|
||
|
Josh Siviour
|
90369371ee |
Feat/nightly e2e fix (#330)
* ci(e2e-nightly): run Go harness suites instead of bash run-*.sh Swap nightly cells 1-3 (single), 8-10 (real-multi) and 18 (reboot) to the compiled <suite>.test binaries, mirroring e2e.yml: SPINIFEX_E2E=1 with SPINIFEX_MODE single|multinode, per-suite logs to ARTIFACT_DIR, then go-junit-report + e2e-analyze + upload-artifact. Adds a spinifex checkout for the composite actions and pulls /run/spinifex/console-*.log so LB microVM (lb-agent) state is captured on failure. Cells 17 (tofu) and 20 (baremetal) stay on bash — no Go suite exists. * ci(e2e-nightly): cell-17 RCA analytics + cell-20 cosmetic alignment run-tofu-examples-e2e.sh now emits go test -v markers per workbook so the cell-17 step's tee'd test-tofu.log flows through the same go-junit-report -> e2e-analyze -> upload-artifact chain as the Go suites, producing junit-tofu.xml and an analysis bundle for RCA. Align e2e-baremetal.yml (cell 20) ARTIFACT_DIR, analyze title, and artifact name with the matrix cells so CI-RCA discovers its bundle uniformly. * ci(e2e-nightly): wire host journal + VM consoles into RCA bundles Collect now emits the canonical spinifex-journal.log (concat of all nodes) that the e2e-analyze bundler slices into each failure's journal.log, so elbv2-service/vpcd/daemon lines in the failure window travel with the bundle (previously the journal uploaded as spinifex-journal-node*.log, a name the bundler never reads). Rename the console capture to vm-console-node* and note it also carries guest cloud-init/sshd consoles, covering the cell-3 internal-LB, cell-18 reboot-datapath, and cell-9/10 guest-ssh blind spots. * ci(e2e): self-heal runner /dev + --one-file-system on workspace clean Clean Workspace now detaches any leaked iso-builder rootfs mount, recreates /dev/null if a prior build clobbered it, and uses rm --one-file-system so the clean can't descend into a still-mounted devtmpfs and delete host device nodes. Guards both the matrix cells and the bare-metal job against the host-wide /dev/null wipe that fails go build with 'open /dev/null: no such file or directory'. |
||
|
Josh Siviour
|
7bcd365549 |
ci(eks-ami): build on self-hosted ci-single runner (#326)
* ci(eks-ami): build on self-hosted ci-single-1 runner GitHub-hosted ubuntu-24.04 cannot run the libguestfs appliance network: passt fails (PID file denied under its AppArmor confine / privilege drop) and the SLIRP fallback has no outbound, so virt-customize --network dies. The self-hosted ci-single-1 runner has /dev/kvm and real networking, so the existing libguestfs build works unmodified. * fix(build-system-image): add --no-cache, force fresh build on publish The <10min cached-raw skip avoids duplicate work for concurrent e2e jobs, but on the persistent publish runner it could republish a stale image from a prior or concurrent run. Add --no-cache to bypass the skip and have publish-system-image.sh pass it on every build. * ci(eks-ami): target ci-single label (no ci-single-1 label exists) The self-hosted runners are named ci-single/-2/-3 but all share the single label 'ci-single'; runs-on matches labels, not names, so ci-single-1 never schedules. * ci(eks-ami): disable Go cache on self-hosted runner setup-go's cache-save (Post Setup Go) re-uploaded the Go cache to the Actions backend on every run, taking ~2.5min vs the 36s build. The self-hosted runner already keeps the cache on local disk, so cache:false. |
||
|
Josh Siviour
|
4ef19fc488 | feat(ui): EKS console (#310) | ||
|
Josh Siviour
|
5ac8dc3fb9 |
fix(network): round-robin external pool cursor — stop instant EIP reuse (recycled EIP unreachable, EKS CI) (#320)
* Revert "fix(network): prime host neigh with gateway port MAC on centralised EIP attach"
This reverts commit
|
||
|
Josh Siviour
|
467e4de715 |
feat(eks): publish eks-node AMI to R2 + spx catalogue entry (#313)
* feat(eks): publish eks-node AMI to R2 + spx catalogue entry Add a spinifex-eks-node catalogue entry so operators install the EKS node image with a single command: spx admin images import --name spinifex-eks-node The entry pulls the Alpine+K3s image from iso.mulgadc.com, verifies its sha256, and stamps spinifex:managed-by=eks — the tag the control-plane and node-group launchers resolve the boot AMI by, so no extra config is needed. Add scripts/publish-system-image.sh (+ make publish-eks-node-image) to convert the built raw to a compressed qcow2, emit a checksum sidecar, and upload both to the R2 bucket backing iso.mulgadc.com/system-ami via the S3 API. * ci(eks): add manual workflow to build + publish eks-node AMI to R2 Build the eks-node AMI on the runner (libguestfs) and publish via publish-system-image.sh using the existing CF_R2_* secrets. Manual workflow_dispatch with a dry-run input. Fix the publish script's default bucket to spinifex-iso (the bucket iso.mulgadc.com is served from). |
||
|
Josh Siviour
|
a1f3fcc531 |
ci(e2e): exclude eks suite from multinode job (#312)
EKS create-cluster fails deterministically on the multinode job with ServiceUnavailableException: the EKS KV is a clustered (Raft) JetStream stream and create-cluster needs an elected leader, but multinode JetStream clustering isn't reliably forming yet (see mulga-omq/z2z/5yg). EKS is validated single-node only at this stage. Drop eks from the multinode build+run suite filters (alongside the existing reboot/single exclusions) so the multinode job reflects what's actually supported. Single-node continues to run the full eks suite. |
||
|
Josh Siviour
|
a4817b1afc |
ci: run baremetal E2E nightly + hard-gate releases on it (#306)
Make e2e-baremetal.yml a reusable workflow (workflow_call + a ref input) so the nightly and release pipelines can invoke the real PXE-reimaged hardware suite, which previously only ran on manual dispatch. Nightly: add a baremetal job (conceptual cell 20) that runs every weeknight on the existing cron, or on dispatch when 20 is selected. It tests dev on schedule, matching GIT_BRANCH. Sits outside the tofu matrix (different runner, provisioning, 120m timeout) and shares the e2e-baremetal-cluster concurrency group, so all baremetal runs serialise on the single physical node. Release: a release builds and uploads an ISO to R2 but never booted that ISO/squashfs path on hardware. Add a baremetal job (needs: release) and hard-gate on it: promotion moves to a dedicated promote job needs:[verify, baremetal] (with a matching mark-failed job on failure), and the iso job's upload gate now waits for both verify and baremetal to conclude success before pushing to R2. Bump the iso job timeout to 180m since it now waits on the parallel ~2h baremetal run. |
||
|
Josh Siviour
|
44d0548fd4 |
ci: make microVM depmod best-effort, drop apt kmod install (#308)
build-microvm-image required depmod (kmod) as a mandatory tool to generate modules.dep. Self-hosted CI runners don't ship kmod and can't reliably apt-install it, so the inline 'apt-get install kmod' steps added to e2e/e2e-nightly/e2e-ddil were unreliable. modules.dep is an optimisation, not a boot requirement: the guest init's load_mod() (build/microvm/init.sh) falls back to insmod-by-path when modprobe can't resolve a module. So: - Drop depmod from the mandatory-tool preflight. - Run depmod only when present; still assert a non-empty modules.dep in that case to keep catching the trixie-kmod empty-dep bug. - Warn and skip when depmod is absent (guest uses insmod fallback). - Remove the apt-get kmod install steps from all three workflows. Gold-image bake still installs kmod (provision.sh), so production images get a proper modules.dep; only kmod-less CI runners take the fallback. |
||
|
Josh Siviour
|
8e0edef7c2 |
ci: install kmod (depmod) before microVM image build (e2e + nightly + ddil) (#307)
* ci(e2e): install kmod (depmod) before microVM image build #305 made depmod a hard requirement in build-microvm-image.sh, but the self-hosted ci-single/ci-multi runners don't ship the kmod package, so the Build Install Artifacts step aborts with 'required tool not found: depmod' before any E2E suite runs. Add an idempotent kmod install ahead of each Build Install Artifacts step (single/multi/eks jobs); the gold-image builder bakes kmod in too, so this no-ops once runners pick up the new image. * ci: install kmod (depmod) in nightly + ddil too e2e-nightly and e2e-ddil call the same build-install-artifacts.sh (-> make build-microvm-image) on the same self-hosted ci-single/ci-multi runners as e2e.yml, so they hit the identical 'depmod not found' abort. Add the same idempotent kmod guard before Build Install Artifacts in both. release distro builds run on GitHub-hosted ubuntu (kmod present); e2e-baremetal runs on ci-baremetal which already has it (green today) — neither needs the guard. |
||
|
Josh Siviour
|
496424c41c |
test(eks): EKS control-plane E2E suite (Sprint 6g) (#304)
* test(eks): EKS control-plane e2e suite (Phase 1, API-level)
Add tests/e2e/eks/eks_test.go driving the EKS lifecycle against awsgw:
CreateCluster -> ACTIVE (endpoint + CA asserted), kubeconfig artifact
assembly, AccessEntry CRUD, get-token presign decode, DeleteCluster -> gone.
Harness: EKS SDK client on AWSClient + WaitForEKSCluster{Active,Deleted}
pollers. Wire e2e-eks into the Makefile and the single-node CI suite list.
* test(eks): Phase 2 kubectl get-nodes data-plane gate
Add the reachability shim (harness/eks_mgmt.go) that reads the control-plane
VM's br-mgmt IP from the cluster KV meta over NATS, plus a kubectl wrapper
(harness/kubectl.go) that skips when kubectl is absent. KubectlGetNodes points
kubectl at https://<mgmtIP>:6443 (insecure-skip-tls-verify; cert SANs the NLB
DNS, not the mgmt IP) with an aws eks get-token exec block and polls until the
control-plane node is Ready — the get-token webhook auth regression gate.
IRSA pod + the real NLB/Route53 passthrough are deferred to a follow-up.
* test(eks): tolerate doubled NotFound code + dial loopback NATS
DeleteCluster detection matched the SDK constant ResourceNotFoundException,
but awsgw emits ResourceNotFoundExceptionException on the wire — match the
NotFound code by substring so deletion is detected immediately instead of
timing out. The mgmt-IP shim dialed NATS.Host verbatim (0.0.0.0:4222), which
the serving cert does not SAN; rewrite the wildcard bind to loopback.
Validated live: all 6 subtests green, kubectl get nodes shows the
control-plane node Ready via the get-token webhook auth path.
* feat: build system images with libguestfs (no host block devices)
Replace the qemu-nbd + sudo mount + chroot + /dev-bind flow in
build-system-image.sh with libguestfs (virt-customize / virt-resize /
guestfish). Every operation runs in an isolated userspace appliance VM with
its own kernel, so the build touches no host block device, no host mount, and
needs no sudo — removing the failure class that wiped the host's /dev on shared
CI runners (a leaked /dev bind traversed by rm -rf).
Applies to all distros: alpine resizes via guestfish e2fsck+resize2fs, ubuntu
via virt-resize; customization (packages, binaries, files, setup script,
service enable, cache cleanup) is one ordered virt-customize invocation.
LIBGUESTFS_BACKEND=direct (no libvirt on runners).
Wire the eks-node AMI into the single-node e2e job: the runner builds the
device-free raw, ships it to the VM, and the VM imports it (predastore/NATS are
VM-only) so the eks suite's CreateCluster has an AMI to boot.
* feat(eks): bootstrap + state-report via AWS gateway broker
Converge the EKS control-plane → host channel onto the ELBv2 lb-agent model:
the K3s server VM publishes its bootstrap envelopes and periodic state reports
via SigV4-signed HTTPS POST to the AWS gateway, instead of dialing core NATS
directly. A new gateway action (PublishInternal, POST
/clusters/{name}/internal-publish) relays the payload verbatim onto the
existing eks.bus.* / eks.state.* subjects, so the daemon-side subscriber, KV
persistence/encryption, and reconciler are unchanged.
This removes the VM's need to reach NATS at all, so NATS can stay
cluster-internal behind its bind/firewall/mTLS controls — the prior direct
path broke when NATS was not VM-reachable (e2e CreateCluster timeout) and was
DDIL-fragile (fire-and-forget nats pub, no ack/retry).
- gateway/eks: PublishInternal broker + route; closed-set channel/kind validation
- cmd/eks-gateway-publish: one-shot SigV4 publisher (retry-until-ack) baked into
the eks-node AMI; replaces the nats-cli publisher in k3s-first-boot.sh and
mulga-eks-state-report.sh
- handlers/eks + daemon: hand the K3s server VM the mgmt-reachable gateway URL +
system (Predastore) SigV4 creds + gateway CA instead of NATS URL/token/CA;
new resolveSystemGatewayBaseURL (mgmt-bridge-first)
- eks-node image: build/install eks-gateway-publish, drop nats-cli download
* feat: migrate eks-token-webhook to the AWS gateway broker
The TokenReview webhook dialed core NATS directly (STS verify + AccessEntry
KV read). On a mgmt-only control-plane VM with NATS bound off-subnet that
fails, so the webhook exited at startup, the apiserver token-webhook
kubeconfig was never written, and the apiserver crash-looped — the cluster
never reached ACTIVE.
Converge it onto the same gateway-broker model as bootstrap/state-report and
ELBv2's lb-agent: the webhook SigV4-signs an HTTPS POST {accountId,token} to
/clusters/{name}/token-review, and the gateway runs the verify + lookup
host-side and returns the resolved identity. The VM now speaks no core NATS.
- internal/eksgw: shared on-VM SigV4 client (also adopted by
eks-gateway-publish).
- handlers/eks/token_review.go: Authenticate decision core (moved from the
webhook binary) + ResolveTokenReview host-side wiring.
- gateway/eks token-review route + WebhookTokenReview handler.
- webhook: drop NATS, relay via eksgw.Client; broker fault -> 503 (retryable)
not a silent deny.
- initd: export EKS_GATEWAY_* / EKS_ACCESS_* creds, not SPINIFEX_NATS_*.
* fix: build eks-node helpers with GOFIPS140; cover token-review broker
eks-gateway-publish blank-imports internal/fipsboot, whose init() panics
unless the binary is built with GOFIPS140=v1.0.0. The eks-node AMI build
omitted the flag, so the binary paniced at first boot right after k3s came
up — k3s-first-boot (set -eu) died before publishing the bootstrap token and
the cluster never reached ACTIVE. Build both eks-node helpers with
GOFIPS140=v1.0.0, matching cmd/lb-agent.
Add NATS-backed unit tests for ResolveTokenReview and the WebhookTokenReview
gateway handler (verify responder + account KV) to cover the new broker path.
* fix: export first-boot env so eks-gateway-publish child sees it
k3s-first-boot.sh and mulga-eks-state-report.sh sourced /etc/spinifex-eks/
first-boot.env but never exported the vars, so the eks-gateway-publish child
process inherited an empty environment and exited '--account-id is required'.
The control-plane VM came up healthy but never published its bootstrap
envelopes, so the cluster never reached ACTIVE. Wrap the source in set -a /
set +a so the KEY=value lines export to child processes.
* fix: make awsgw start --host override actually bind
The 'awsgw start --host' override printed 'Overwriting awsgw host' but the
assignment was commented out, so AWSGW always bound the spinifex.toml host
(a specific WAN IP, e.g. 192.168.0.10). A system instance (EKS K3s control
plane, internal LB agent) has a mgmt-only NIC on-link to the br-mgmt IP with
no route to the WAN IP, so its SigV4 POSTs to the gateway were refused and the
cluster never bootstrapped. Honour --host (e2e passes 0.0.0.0:9999) so AWSGW
listens on all interfaces incl. br-mgmt; the serving cert already SANs every
local interface IP, and WAN clients still reach it.
* test(eks): install kubectl on e2e VM so KubectlGetNodes runs
The eks data-plane subtest (TestEKS/KubectlGetNodes) drives the full
aws eks get-token -> kubectl -> apiserver -> token-webhook -> gateway broker
-> STS verify path — the only end-to-end exercise of the token-review broker.
The e2e binaries run on the VM, where kubectl was absent, so
harness.NewKubectl t.Skip'd it and the path went unvalidated. Install a
checksum-verified kubectl (pinned to the k3s server version) on the VM,
gated on e2e-eks.
|
||
|
joshsiv-mulga
|
d8aa31e699 |
ci(baremetal): capture combined log + junit + analyze bundle on failure
Bare-metal e2e produced no artifact, so RCA fell back to truncated log-failed output. Tee bootstrap + e2e output to test-baremetal.log, generate junit-baremetal.xml, run e2e-analyze to emit analysis.md, and upload the bundle as e2e-baremetal-artifacts-<run_id>. |
||
|
joshsiv-mulga
|
f4ba115316 | ci(baremetal): revert e2e to single-node | ||
|
joshsiv-mulga
|
3bb90c9fd3 |
fix(ci): guard release Clean Workspace against leaked iso-builder devtmpfs
The iso job mounts a kernel-global devtmpfs under the workspace (.cache/rootfs/dev). A killed job skips its EXIT-trap unmount and leaks the bind; the verify job (same ci-single runner) then ran a bare 'rm -rf $WORKSPACE/*' that could traverse it and wipe the host /dev. Detach any mount under the workspace before deleting and add --one-file-system so rm never crosses a mount boundary. Same backstop added to the iso job's own cleanup. |
||
|
joshsiv-mulga
|
da26b1db69 |
fix(ci): stop image-build /dev bind from wiping host /dev
A killed ubuntu system-image build can leave `mount --bind /dev` under its build dir. The e2e Clean Workspace step then ran `sudo rm -rf "$GITHUB_WORKSPACE"/*` as root, traversed the leaked bind, and deleted the host's /dev (incl. /dev/null), wedging the runner. - e2e.yml: umount anything under the workspace (deepest-first) before deleting, and pass `rm --one-file-system` so rm can never cross a mount boundary into host /dev. Hard backstop, applied to all 3 Clean Workspace steps. - build-system-image.sh: recursive lazy unmount in cleanup() detaches the chroot binds even when busy, and mark the build subtree rprivate so the /dev bind can't propagate into the host namespace. |
||
|
tomnewton-mulga
|
6be3ccbb23 | fix: unify .iso and .iso.sha filenames | ||
|
tomnewton-mulga
|
158b3a25c5 | fix: updated release.yml for clean iso uploads | ||
|
joshsiv-mulga
|
af690b3299 |
test(elbv2): collect LB microVM guest console in CI + surface NLB probe failures
NLB target health stalls at 0/N in CI while the data plane works locally. The lb-agent's nginx engine activation, any nginx -t/reload error, and its active-probe results are logged to the LB microVM serial console — which the host journal never captures and the GetConsoleOutput API path reports as NotFound, so the failure is undiagnosable from CI artifacts. - e2e.yml: pull /run/spinifex/console-*.log off each node in the single- and multi-node collect steps (files persist past VM teardown) into lb-console/. - lbagent healthcheck: log probe failures at Warn (was Debug) so unreachable targets surface at the agent's default level on the captured console. |
||
|
Julian Sommer
|
dae0b521da | fix: remove falltrhough code owners | ||
|
Julian Sommer
|
c666c8146d | fix: e2e.yml | ||
|
Julian Sommer
|
044d35737e | feat: remove bash e2e for e2e-go | ||
|
Julian Sommer
|
9508aaacce | chore: bump go 1.26.4 | ||
|
joshsiv-mulga
|
7cd054cbf1 | chore(e2e): dump Logical_Router_Policy + Logical_Router_Static_Route in W5 diag | ||
|
joshsiv-mulga
|
ba7253e2c6 |
ci(e2e): fix Start Packet Capture EACCES + PID-tracking on tcpdump (siv-167)
Two bugs in
|
||
|
joshsiv-mulga
|
afd63ed967 |
ci(e2e): Phase 1 diag — tcpdump br-wan + bridge fdb + hairpin modes (siv-167)
Mulga-siv-167 Phase 1. Adds evidence-capture for the LB single-host return-path drop class: e2e_single only: - New step 'Start Packet Capture' between Bootstrap and Run E2E Tests. SSHes to test VM and starts background tcpdump on br-wan capturing TCP/22/80/443/9999 + ARP into /tmp/spinifex-diag/br-wan.pcap. PID stored at /tmp/spinifex-diag/tcpdump.pid. All three jobs (single, pseudo-multi, real-multi): - Collect Diagnostics: kill tcpdump (single only — PID file guarded) -INT for graceful flush, falls through to -KILL after 5s. - Adds journal-spinifex-full.log (no -n truncation) alongside the existing -n 10000 capped one. - Adds bridge fdb show, bridge link, and hairpin_mode/learning/flood for every br-wan brif — needed to confirm/disconfirm the hairpin-loss hypothesis in the plan doc. - Adds 'chmod -R a+r /tmp/spinifex-diag' before tar to ensure pcap (created by sudo tcpdump as root) is readable by tf-user. bash -n verified on all four rendered scripts. YAML parses. Zero new gold-image deps (tcpdump, bridge present in base image). |
||
|
joshsiv-mulga
|
3f4613c28b |
ci(e2e): capture OVN/OVS/journal diagnostics on every run
Adds a Collect Diagnostics + Upload Diagnostics step pair to all three
E2E jobs (single, pseudo-multi, real-multi). Runs before Teardown,
if: always() so green runs produce baselines too. SSHes to test
VM(s), dumps:
- journalctl for spinifex-*, ovn-*, openvswitch-*
- ovs-vsctl/ofctl/appctl: bridge state, br-int + br-ex flows,
dpctl flow + conntrack tables
- ovn-nbctl/sbctl: show, Port_Binding, Chassis, NAT, Logical_Router
- ovn-appctl ct-zone-list (LR -> ct_zone mapping)
- ip addr/route/neigh, iptables-save, nft list, dmesg, virsh list
Tarred, scp'd back, uploaded as e2e-diag-{single,pseudo,multi}-<run>
artifact (14-day retention).
OVS-native ovs-appctl dpctl/dump-conntrack — no new gold-image deps.
Multi-node job writes script to RUNNER_TEMP then ssh-stdin's it
per-node (avoids YAML/heredoc indent traps inside for-loop). bash -n
verified on all three rendered scripts.
Unblocks siv-111 debug loop: bash LB driver does not emit an
analysis bundle on failure, so post-W2 recurrences have been blind.
Workflow-level capture is hypothesis-free.
|
||
|
Josh Siviour
|
3415d9f3de |
fix(network): IGW route-table AWS parity + per-subnet egress gating (#270)
* fix(network): IGW default route AWS-parity via per-subnet LR policy
ADR-0006's IGWManager.AttachIGW installed a VPC-router-wide 0.0.0.0/0
static route at attach time, violating AWS semantics: every subnet on
the LR saw egress to the IGW regardless of its route table. Private
subnets that should be IGW-isolated were not.
Move IGW egress lifecycle onto the route-table API. CreateRoute(IGW,
0.0.0.0/0) emits vpc.add-igw-route per associated subnet; the network
subscriber installs an OVN Logical_Router_Policy matching
`inport == "rtr-<subnetID>" && ip4.dst == 0.0.0.0/0` with action
`reroute` via the IGW gateway port. DeleteRoute / DisassociateRouteTable
/ ReplaceRouteTableAssociation tear it down. AssociateRouteTable emits
add events so the terraform ordering (CreateRoute -> Associate) is
honored.
Additions:
- nbdb.LogicalRouterPolicy + Logical_Router_Policy registration
- ovn.Client {Add,Delete,Find,List}LogicalRouterPolicy + live + mock
- policy.RouteManager.{Add,Delete}SubnetEgress with priority constants
- external.IGWManager.{Ensure,Remove}SubnetEgress resolving nexthop +
output port from the gateway state
- subscribers handleAddIGWRoute / handleDeleteIGWRoute on
vpc.{add,delete}-igw-route
- routetable publishIGWRouteEvents / *ForAssociation / *ForSubnet
Test updates:
- network/policy: AddSubnetEgress idempotency, drift-replace, per-subnet
separation, DeleteSubnetEgress
- network/external: AttachIGW must NOT install a router-wide default
route; EnsureSubnetEgress installs the per-subnet policy with the
resolved nexthop (link-local fallback + allocator override paths)
- handlers/ec2/routetable: CreateRoute(IGW), Associate, DeleteRoute,
Disassociate publish events with the expected subnetID + igwID
- ovn/nbdb: table-count + Logical_Router_Policy presence
- subscribers: TestSubscribe_RegistersAllTopics covers the two new topics
* fix(network): NATGW per-subnet egress + DeleteRoute event symmetry
handlers/ec2/routetable:
- DeleteRoute now publishes vpc.delete-nat-gateway per associated subnet
(mirror of the IGW DeleteRoute path) so the subscriber tears down both
the SNAT rule and the per-subnet egress policy.
- publishNatGatewayEvent* signatures carry SubnetId + DestinationCidr so
the subscriber can install the matching Logical_Router_Policy.
network/external:
- IGWManager: EnsureNATGatewaySubnetEgress / RemoveNATGatewaySubnetEgress
install/remove a per-subnet LR policy at priority SubnetEgressPriorityNATGW.
Same nexthop and output port as the IGW priority sibling; lower priority
so an IGW route wins when both apply to the same subnet.
- EnsureSubnetEgress delegates to ensureSubnetEgressAtPriority for shared
validation, lookup, and slog tagging.
network/subscribers:
- handleAddNATGateway: after SNAT install, parse DestinationCidr (defaults
to 0.0.0.0/0) and call EnsureNATGatewaySubnetEgress. Without this the LR
has no route to egress NAT'd packets and private-subnet traffic is
dropped (E2E Phase 8d regression).
- handleDeleteNATGateway: remove the per-subnet policy FIRST, then detach
SNAT, so packets are never routed unmasqueraded after SNAT removal.
- NATGatewayEvent gains SubnetId + DestinationCidr.
Tests:
- policy.AddSubnetEgress validation + drift-replace + propagation paths.
- mock LR-policy methods reject missing routers and tolerate dangling UUIDs.
- subscribers cover NATGW add/delete with invalid CIDR, bad JSON, missing
router, IGW-route bad JSON + invalid CIDR. Full end-to-end add+delete
via NATS asserting policy lifecycle.
- IGW manager covers RemoveSubnetEgress / RemoveNATGatewaySubnetEgress
empty-arg rejection + delete error propagation.
- routetable: DeleteRoute(NATGW) publishes per associated subnet.
* fix(network): exclude VPC CIDR from per-subnet egress reroute predicate
In-VPC traffic (e.g. bastion -> private SSH) was being intercepted by the
NATGW per-subnet egress LR policy on `ip4.dst == 0.0.0.0/0` and forwarded
out the gateway with SNAT, breaking peer-subnet connectivity. Append
`&& ip4.dst != <vpcCIDR>` to the match so in-VPC destinations skip the
reroute and follow the directly-connected route. Apply to both IGW (1000)
and NATGW (900) priorities. CIDR is read from the LR ExternalIDs label
populated at VPC create.
DeleteSubnetEgress takes the same excludes so the match string is
identical on cleanup. igwManager.vpcExcludeCIDRs fetches from the router
each call; lookup failure returns nil and the policy installs without
exclusions (preserves prior behaviour as fallback).
* fix(routetable): publish per-subnet events for implicit main-RT membership
E2E run 26620082197 RCA: subnets with no explicit RT association inherit
the VPC main route table per AWS semantics, but publishIGWRouteEvents and
publishNatGatewayEvents iterated only record.Associations and skipped
Main:true/SubnetId:"" sentinels. Main RT carries exactly one such
sentinel, so CreateRoute(igw)/CreateRoute(natgw) on the main RT fanned
out to ZERO subnets — subscriber never called EnsureSubnetEgress, OVN
LR policy never installed, ping 8.8.8.8 from default-VPC VMs dropped at
the VPC router. Caused TestVPCSubnetE2E, TestNATGateway,
TestMultinodeSpread/NATGatewayInternet to fail.
Add subnetsImplicitlyOnMainRT helper that enumerates VPC subnets
without explicit non-main associations, and fan publish to them when
record.IsMain. Apply to all three publish helpers (IGW, NATGW,
NATGW-delete).
Symmetric fixes for effective-RT changes:
- AssociateRouteTable: subnet leaves implicit main → emit deletes for
main RT's routes before adds for explicit RT
- DisassociateRouteTable: subnet returns to implicit main → emit adds
for main RT's routes after deletes for departing RT
* chore(e2e): capture per-LR lr-route-list/lr-policy-list/lr-nat-list
ovn-nbctl show does not dump static routes or policies. Adds three
per-LR captures so RCA can verify policy/route install state after
the IGW per-subnet refactor.
* chore(e2e): tcpdump br-wan + neigh/fdb/conntrack capture during tests
EIP egress regression on feat/igw-route-table-aws-parity shows SNAT
packets present (n_packets>0) but pings still time out. Post-teardown
ovn.* snapshots can't tell whether replies actually arrived on br-wan
or got dropped at L2 / by upstream router.
start-net-capture.sh: nohup tcpdump on br-wan filtered to 192.168.0.0/23
(EIP pool) + ARP for same range, 200-byte snaplen, 64 MiB cap. Pair:
capture-net-diag.sh stops it via /tmp/spinifex-e2e-tcpdump.pid and copies
wan.pcap into net-diag/.
Also added neigh/bridge-fdb/conntrack dumps to capture-net-diag.sh so
L2/L3 binding state is visible alongside the existing OVN dumps.
Wired both single-VM and multinode workflows to start capture before
the e2e run; teardown step picks up the pcap automatically.
* fix(reconcile): rebuild IGW/NATGW per-subnet egress from KV
Publisher fires vpc.add-igw-route during default-VPC bootstrap before the
subscriber daemon attaches to the topic. NATS core pub/sub drops the
message, leaving the LR without a 0.0.0.0/0 policy and off-subnet egress
broken on the affected VPC for the lifetime of the process. Reproduced
in CI: TestVPCSubnetE2E bastion EIP could ARP and DNS its on-LAN
neighbour but never reach 8.8.8.8.
LoadIntentFromKV now fans every IGW or NAT-gateway RT route out over
its explicit + implicit-main subnets and the reconcile pass invokes
EnsureSubnetEgress / EnsureNATGatewaySubnetEgress for each one. Same
shape as publishIGWRouteEvents so the bootstrap and the runtime event
path produce identical OVN state.
* fix(routes): serialize OVN egress wiring via request-reply
vpc.igw-attach, vpc.add-igw-route and vpc.add-nat-gateway were fire-and-forget
Publish, racing the subscriber's AttachIGW barrier. AttachInternetGateway
returned before vpcd finished wiring the OVN gateway LRP, so a follow-up
CreateRoute(IGW) published an add-igw-route event that the subscriber
processed in a parallel goroutine — installing a Logical_Router_Policy with a
nexthop the LRP didn't yet expose. northd compiled an inert reroute that
never recovered, leaving the bastion's egress traffic blackholed (no packets
dst 8.8.8.8 from the failing VPC's EIP even though local DNS succeeded).
Switch the three add-* publishers to utils.RequestEvent. The subscriber ACKs
once OVN state is committed, so the gateway handler can't issue subsequent
route events against a half-wired router. delete-* paths stay Publish —
teardown ordering doesn't matter.
handleAddNATGateway now calls respond() at every exit so requesters don't
hang. Route-table tests gain an ackSub wrapper (async subscribe + auto-Reply)
so request-based publishers complete during unit tests.
* Revert "fix(routes): serialize OVN egress wiring via request-reply"
This reverts commit bf6f77d5bc8b21f72ed5867175d5a67c010066c8.
* fix(igw): restore default static route in AttachIGW/DetachIGW
OVN 25.03 LR pipeline runs lr_in_ip_routing (table 15) BEFORE lr_in_policy
(table 17). When this branch swapped the per-VPC default static route for
the per-subnet Logical_Router_Policy reroute installed by EnsureSubnetEgress,
external destinations started dropping at routing priority-0 before the
policy table ran. Reproduced locally: ovn-trace stops at table 15 drop, ping
8.8.8.8 from inside a fresh-VPC bastion produced zero packets on br-wan
until `ovn-nbctl lr-route-add <router> 0.0.0.0/0 <wan-gw> <gw-port>` was
issued manually — after which the same ping succeeded immediately. dev still
green because dev calls AddDefaultRoute on AttachIGW.
Restore the original AddDefaultRoute / DeleteDefaultRoute calls; keep the
per-subnet EnsureSubnetEgress machinery intact so future per-subnet egress
gating (DROP policies for subnets whose RT lacks a 0.0.0.0/0 route) can
layer on top. Flip the two TestAttachIGW assertions that pinned the
"AttachIGW must not install a default static route" expectation.
Pairs with revert of bf6f77d5 in the previous commit (request-reply
serialization treated a non-existent race; real bug was missing routing
fallback).
* feat(network): per-subnet egress drop gating for AWS RT parity
VPC LRs carry a router-wide 0.0.0.0/0 default static route while an IGW is
attached (lr_in_ip_routing runs before lr_in_policy on OVN 25.03, so per-
subnet reroute alone is insufficient). Subnets whose effective route table
lacks 0.0.0.0/0 were previously able to egress via that default route,
violating AWS semantics.
Install an LR_Policy DROP at SubnetEgressPriorityDrop=1100 (above IGW=1000
and NATGW=900) for unrouted subnets. Match excludes VPC CIDR, link-local
(169.254/16) and multicast (224/4) so intra-VPC, DHCP/metadata and
multicast still flow.
Wiring:
- policy.RouteManager gains AddSubnetEgressDrop / DeleteSubnetEgressDrop.
- external.IGWManager gains EnsureSubnetEgressDrop / RemoveSubnetEgressDrop.
- New events: SubnetEgressGateEvent / SubnetEgressUngateEvent on topics
vpc.gate-subnet-egress / vpc.ungate-subnet-egress.
- routetable handler publishes gate/ungate alongside existing add/delete
IGW/NATGW route events on every CreateRoute/DeleteRoute/Associate/
Disassociate/Replace mutation, based on subnet's recomputed effective RT.
- reconciler bootstrap path emits DropGates intent for subnets in IGW-
attached VPCs whose effective RT lacks 0.0.0.0/0.
Tests cover primitive idempotency, drift recovery, event publishing per
mutation surface, implicit-main fan-out, and intent computation.
* fix(igw): fan out subnet egress gate decisions on IGW attach/detach
The reconciler computes per-subnet DROP policies for any subnet in an
IGW-attached VPC whose effective route table lacks 0.0.0.0/0, but those
decisions were only re-evaluated by the periodic drift tick (every
5 min). AttachInternetGateway / DetachInternetGateway now publish
gate/ungate events for every subnet in the VPC immediately, closing
the window where a freshly-attached IGW could leave unrouted subnets
unprotected.
Wiring: IGWServiceImpl gains a nil-safe GatePublisher hook satisfied
by RouteTableServiceImpl. Daemon installs the hook once both services
exist. RouteTableServiceImpl.PublishGateDecisionsForVPC enumerates the
VPC's subnets and reuses publishSubnetEgressGateDecision per subnet.
Also fixes the LB e2e suite, which built VPC + IGW + subnet without
ever creating a 0.0.0.0/0 → IGW route — relying on the pre-DROP-gate
behaviour where unrouted subnets still had silent egress via the
router-wide static route. The fixture now installs the explicit
public route on the main RT (AWS-faithful semantics for a public
subnet).
* fix(igw): skip gate fan-out on attach to avoid bootstrap race
AttachInternetGateway fan-out races with the default-VPC bootstrap path
in ensureDefaultVPCInfrastructureFor, which attaches the IGW and
immediately publishes a 0.0.0.0/0 → IGW CreateRoute event. The two
events land on distinct NATS subjects (vpc.gate-subnet-egress vs
vpc.ungate-subnet-egress) with no cross-subject ordering guarantee.
When ungate arrived first the subscriber became a no-op and the
subsequent gate installed a permanent DROP on the default subnet,
killing the return path for guest SSH probes
(TestMultinodeGuestSSH connect timeout to the instance public IP).
Detach fan-out is retained — no follow-up CreateRoute fires after
DetachInternetGateway so the path is race-free.
Subnets without a default route still get DROPped during the
reconciler's periodic drift pass (loadSubnetDropGates). The window is
re-opened to ≤5 min on user-driven AttachInternetGateway, which is
the original behaviour pre-mulga-siv-163. A follow-up bead can close
that gap properly by converting the gate/ungate subjects into a
single recompute trigger that re-reads effective RT state.
* fix(vpc): prevent duplicate main route table from bootstrap race
Concurrent multi-node daemons running EnsureDefaultVPC for the admin
account (bootstrap-pinned VpcId) each minted a fresh random rtb-ID and
Put it with IsMain=true. The KV ended up with two main route table
records for the same VPC.
CreateRoute's post-write gate recompute (per-subnet egress drop gating)
then resolved effectiveRouteTable non-deterministically across the two
IsMain=true records; when the orphan (route-less) RT won, the gate
decision became "no default egress" and vpc.gate-subnet-egress fired.
The subscriber installed a Priority-1100 DROP on the default subnet's
egress, killing the return path for guest SSH probes
(TestMultinodeGuestSSH connect timeout to 192.168.0.161 in run
26699045536).
Two-part fix:
1. createMainRouteTable scans rtbKV for an existing IsMain=true record
on the same VPC before Put-ing a new one. Race window narrows from
"always duplicates under concurrent bootstrap" to a sub-ms TOCTOU
between scan and Put.
2. effectiveRouteTable / mainRouteTable use a deterministic preferMain
tiebreak when multiple IsMain=true records exist: more routes >
oldest CreatedAt > smaller RouteTableId. Defensive — any duplicate
that slips through (cross-AZ restore, manual KV edit, residual race)
still produces consistent egress gate decisions instead of flapping
on KV scan order.
* fix(policy): atomic ACL replacement for SG mutations
Add ovn.Client.ReplaceACLs — detach + delete existing ACL rows and
attach freshly-created rows in one OVSDB transaction. EnsureSG and
UpdateSG now funnel through ReplaceACLs instead of ClearACLs +
AddACLs, closing the mid-flight window where the port group held
zero ACLs and tenant LSP traffic defaulted to drop (observable on
ICMP and on TCP SYNs that miss conntrack).
Mock client exposes ClearACLCalls / ReplaceACLCalls counters so
tests can assert atomicity. New TestSGManager_UpdateSG_AtomicReplace
fails if SG mutations ever fall back to the split path.
|
||
|
tomnewton-mulga
|
78d703da78 |
Feat/mig capable (#260)
* feat(gpu): add NVIDIA MIG multi-instance GPU support
Partitions MIG-capable GPUs (A100, A30, H100) into isolated slices exposed
as mdev devices instead of whole-GPU VFIO passthrough. VMs attach via
-device vfio-pci,sysfsdev=<mdev-path> using the GPUAttachment discriminated
union (PCIAddress for whole-GPU, MdevPath for MIG).
Key changes:
- gpu: new MIGProfile/MIGInstance types, IsMIGCapable model map, mig.go ops
(EnableMIGMode, DisableMIGMode, CreateInstances, ListInstances,
DestroyAllInstances, enrichMdevPaths)
- gpu.Manager: Claim() returns (*GPUDevice, *MIGInstance, error); AddMIGInstances,
ReclaimByMdev for restart recovery; MarkMIGFailed per-slice
- daemon: buildGPUPool helper partitions devices into whole-GPU vs MIG pools;
MIGProfile config field selects profile per node or per GPU override
- vm.VM: GPUAttachments []gpu.GPUAttachment replaces GPUPCIAddresses []string
- admin CLI: spx admin gpu mig status/enable/disable subcommands with
admin.SetMIGProfile for spinifex.toml writes
- docs: COMMANDS.md updated with three new MIG management command rows
* test(gpu): unit tests for MIG parsers and pool manager
Cover all pure parsing functions (parseMIGMemory, isCapacityExhaustedError,
extractProfileFields/GIFields, parseMIGProfiles, parseMIGInstances,
parseCreatedGIID/CIID) with realistic nvidia-smi fixture output.
Manager MIG tests cover AddMIGInstances, Claim/Release on mdev-backed entries,
MarkMIGFailed, ReclaimByMdev, and interaction with whole-GPU MarkFailed — all
using fake mdev directories in t.TempDir() so no GPU hardware is required.
* feat(gpu): dynamic MIG profile-per-request with on-demand GI/CI lifecycle
Replaces static config-driven MIG pre-carving with a dynamic model where
the MIG profile is specified per RunInstances call via mig.<profile>
instance type names (e.g. mig.1g.10gb) that mirror nvidia-smi nomenclature
directly.
- Manager.Claim(instanceID, profileName): fast path claims a pre-carved
slice; slow path dequeues a free MIG GPU, releases the lock, calls
nvidia-smi mig -cgi/-cci to carve all slices, then reclaims the lock to
commit and return the first slice
- Manager.Release: last release on a dynamically-carved GPU calls
DestroyAllInstances and returns the GPU to freeMIGGPUs, allowing a
different profile on the next claim
- AddMIGGPU(dev): registers a fresh MIG GPU for dynamic allocation;
AddMIGInstances (restart recovery) keeps its no-destroy semantics
- GenerateMIGTypes: produces mig.<profile> InstanceTypeInfo entries from
gpu.ListProfiles at daemon startup; IsMIGType/MIGProfileFromType let
callers inspect these names
- buildGPUPool: calls ListInstances for recovery, AddMIGGPU for fresh
GPUs, ListProfiles to collect MIG profile specs for type generation;
removes setupMIGInstances and migProfileForDevice
- GPUClaimer.Claim gains profileName param; daemonGPUClaimer, service_impl
call sites, and fakeGPUClaimer all updated
* fix(gpu): correct mdev parent detection and make --profile optional for mig enable
enrichMdevPaths was using os.Readlink on "parent_bus_0" (a non-existent
sysfs attribute) and then on ".." (a directory, not a symlink) — both
would fail on real NVIDIA hardware, breaking CreateInstances and
ListInstances on daemon restart recovery. Fix: read the mdev UUID's own
symlink target, which always encodes the parent GPU's PCI address in its
path (e.g. .../0000:01:00.0/<uuid>).
Make basePath injectable in enrichMdevPaths so the fix is covered by a
new set of unit tests using temp-dir symlinks (TestEnrichMdevPaths_*).
Remove the MarkFlagRequired("profile") from "spx admin gpu mig enable":
Phase 2 is fully dynamic — the daemon carves slices on demand at
RunInstances time. Without --profile, the command just enables MIG mode
and destroys any pre-carved slices so the daemon starts with a free GPU.
With --profile, behaviour is unchanged (pre-carve a static pool).
* chore: writeups for smci and arcee
* test: add coverage for MIG exec, manager slow-path, instancetypes and admin
- Add mig_exec_test.go with fake nvidia-smi harness covering Enable/Disable MIGMode,
IsMIGModeEnabled, DestroyAllInstances, ListProfiles, CreateInstances, ListInstances
- Extend manager_mig_test.go with slow-path Claim/Release tests using fake nvidia-smi
- Add generate_test.go coverage for IsMIGType, MIGProfileFromType, GenerateMIGTypes
- Add admin_test.go coverage for SetMIGProfile (create, update, idempotent, error paths)
- Make mdevBasePath a var to allow sysfs injection in tests
- Add json tags to GPUAttachment fields to satisfy musttag linter
Diff coverage: 75.6% (threshold: 60%).
* fixed gpu passthrough doc
* Revert "fixed gpu passthrough doc"
This reverts commit
|
||
|
Josh Siviour
|
fd3dc6b680 |
feat(network): ADR-0006 layer redesign + IPsec/OVN hardening (#255)
* refactor(vpcd): remove macvlan bridge mode
Macvlan was a single-NIC SSH-safe hack that predated veth mode and was
never selected by any active config path. Deletion is Phase 0 item 1 of
the network layer redesign (mulga-siv-125.1).
Removed:
- BridgeModeMacvlan const + setMacvlanMAC + ifaceIsMacvlan probe
- Macvlan MAC alignment block in launchService (only fired on dead path)
- Macvlan branch in detectBridgeMode + matching tests
- Macvlan duplicates of IGW/AddNAT centralized-NAT tests (veth versions
already cover the same path)
- --macvlan flag + macvlan case branch in setup-ovn.sh
Refactored:
- useCentralizedNAT() now == BridgeModeVeth (was != BridgeModeDirect);
verifyBridgeMode already rejects empty/unknown at startup
- Three IGW-pool tests now explicitly WithBridgeMode(BridgeModeVeth)
(previously relied on empty-mode defaulting to centralized)
Kept intentionally:
- Deprecation notes in docs/compute/vpc-networking/README.md
- Legacy macvlan-interface cleanup in reset-dev-env.sh + ansible
teardown role (migration for operator systems with stale spx-ext-*
interfaces from pre-veth installs)
* feat(vpcd): resolve external CIDR at startup with bounded retry
Block service start until the WAN bridge has an IPv4 address, with a 30s
retry window. Phase 0 item 2 of the network layer redesign
(mulga-siv-125.1). Guards the boot race where vpcd starts before
systemd-networkd finishes DHCP on br-wan, or before netplan applies a
static config.
Skipped when ExternalMode is empty (overlay-only deployments).
Forward-compatible with ADR-0006: the new resolveExternalCIDR /
externalCIDRFromBridge helpers become the backing implementation of
HostWiring.ExternalCIDR() once the network/host package lands in Phase 1.
Until then the resolved value is only used to fail-start on missing
uplink.
* fix(vpcd): cover external CIDR startup paths
Extract launchService's CIDR-resolve block to ensureExternalCIDRReady
helper so it's unit-testable, and add direct tests for
externalCIDRFromBridge (loopback + unknown-interface) to exercise the
original literal body. Closes the diff-coverage gap on Phase 0 commit
15b564d which left these paths unreachable from unit tests.
* refactor(network/ovn): extract L1 OVN client to network/ovn package
Move OVNClient interface, LiveOVNClient, ACLSpec, ErrNATNotFound and
namedUUID helper from services/vpcd to a new spinifex/network/ovn
package. The mock relocates to spinifex/network/ovn/mock as a
sub-package. Storage fields on the mock become exported so vpcd tests
can continue to seed/inspect state across the new package boundary.
services/vpcd retains thin type-alias and var-alias shims so existing
callers compile unchanged; Phase 2 removes those shims as vpcd is torn
down.
Adds -coverpkg=./spinifex/... to test-cover so cross-package test
exercise of mock methods continues to count toward coverage now that
the mock lives outside vpcd.
First sub-step of Phase 1 of docs/development/feature/spinifex-network-redesign.md
(bead mulga-siv-125.2). Pure refactor; no functional change. All
existing tests pass; preflight green.
* feat(network/topology): TopologyManager interface + vpcd adapter
Add spinifex/network/topology with Manager interface, VPC/Subnet/Port
specs, and OVN object naming helpers covering the L2 stable contract
(§7 of the redesign plan). Phase 1 keeps existing in-tree OVN names
(rtr-, ext-port-, sg_) and notes the §7.3 targets for a later
reconciliation migration.
TopologyHandler in services/vpcd grows EnsureVPC / DeleteVPC /
EnsureSubnet / DeleteSubnet / EnsurePort / DeletePort /
SetPortSecurityGroups methods that mirror the corresponding NATS
handlers' OVN ops with Spec inputs instead of nats.Msg envelopes,
satisfying topology.Manager via a compile-time check. Existing handlers
are unchanged; the duplication is short-lived (Phase 2 collapses them).
Smoke tests in topology_manager_test.go cover the idempotent create
path, delete cascade, and declarative SG membership move. Deliverable:
TopologyManager.EnsureVPC/Subnet/Port callable; all existing tests
green.
Second sub-step of Phase 1 of docs/development/feature/spinifex-network-redesign.md
(bead mulga-siv-125.2).
* feat(network/host): L0 HostWiring interface + physical/veth impls
Phase 1 deliverable for mulga-siv-125.2. Introduces network/host (L0 of
ADR-0006): UplinkMode enum, Wiring interface, and Physical/Veth
implementations with injectable Runner + InterfaceReader for testability.
Not yet wired into daemon/vpcd — Phase 2 replaces daemon.SetupComputeNode
and vpcd's resolveExternalCIDR with calls through this package.
* feat(network/policy): L3 SecurityGroup/NAT/Route managers
Introduce network/policy as the data-plane policy layer (ADR-0006 L3).
Three managers, all backed by network/ovn:
- SecurityGroupManager: clear+add ACL replacement on an existing port
group; port group lifecycle stays with L2 (topology.Manager).
- NATManager: bound to one NATMode at construction (derived from
host.UplinkMode). Distributed sets logical_port/external_mac on EIP
dnat_and_snat rules; centralised leaves them unset. Per-EIP, NAT GW,
and IGW-default SNAT entrypoints; all deletes idempotent.
- RouteManager: AddStaticRoute is read-then-decide so retries no longer
duplicate rows (closing the long-standing non-idempotency bug in
vpcd/topology.go's IGW default-route path).
ACL priority constants and infrastructure ACL builders move from
vpcd/{security,acl}.go into policy/acl.go with their semantics preserved
(default-deny 900/800 logged, DHCP-allow 1050, tenant 1000). No vpcd
wiring changes here — additive only; the reconciler (bead .3.2) and
network/external (bead .3.4) will consume these managers.
bead: mulga-siv-125.3.1
* feat(network/external): L5 IGW/EIP/NATGW managers
Pure additive — new package, no topology.Manager changes, no rewiring of
existing vpcd handlers. IGWManager builds the external switch + localnet +
gateway LRP + default route + chassis HA, with a flows barrier callers can
inject (production: ovn-nbctl --wait=hv sync). EIP/NATGW are thin L5
wrappers over policy.NATManager. GatewayIPAllocator interface lets the
DHCP-backed allocator stay in vpcd until the DHCP-mgr removal bead lands;
LinkLocalAllocator + StaticRangeAllocator ship here.
* feat(network/reconcile): L6 intent-actual reconciler replaces 5-pass startup
Build spinifex/spinifex/network/reconcile/ package per Phase 2.2 of the
network layer redesign. Reads desired state from NATS KV filtered by
vpc.AZ (with legacy empty-AZ matches-all rule), scans actual state from
OVN NB DB, diffs and applies with VPC → Subnet → Port → SG → IGW →
EIP/NATGW topological ordering.
Atomic port-group join via CreateLogicalSwitchPortInGroups closes the
racy gap the legacy scanENIPortMembership pass used to revive 30s later.
A 5-minute drift goroutine (leader-gated via JetStream KV CAS) replaces
the old 30s ReconcileSGsLoop.
Adds AZ field to VPCRecord stamped at create time. Empty AZ on pre-Phase
2.2 records matches every local AZ, so no migration pass is required.
Replaces and removes the 5-pass startup sequence in services/vpcd:
- Reconcile + ReconcileFromKV
- ReconcileSGsOnce + ReconcileSGsLoop
- RetrofitAllExternalLocalnetOptions
- RetrofitAllGatewayPortNetworks
IGW fresh-create continues to flow through the legacy NATS handler path
(handleIGWAttach) so the dhcpManager wiring stays intact until Phase
2.3; the reconciler only rebinds gateway-chassis on existing IGW
topology.
Closes mulga-siv-125.3.2.
* refactor(network/topology): promote live Manager impl to network/topology
Move the topology.Manager implementation out of services/vpcd/topology_manager.go
into network/topology/manager_live.go as a standalone liveManager constructed
via NewLiveManager(ovn.Client, opts...). Inputs that varied per-handler
(DNS server resolution from the external pool) are now passed as functional
options (WithDNSServer).
TopologyHandler still satisfies topology.Manager but its methods delegate
to a cached liveManager. The shim stays until the rest of mulga-siv-129
routes NATS subscribers through topology.Manager directly.
Also exports SubnetGatewayCIDR + FormatDNSServerList from network/topology
so the reconciler in network/reconcile can share helpers with the live
manager (audit pass to follow per plan §6).
Test cases ported one-for-one from services/vpcd/topology_manager_test.go
to network/topology/manager_live_test.go; the vpcd-side test file is
deleted. New WithDNSServer test asserts the option propagates into
DHCPOptions rows.
Refs mulga-siv-129 (Phase 2.6 vpcd subscriber migration, Slice 1 of N).
* refactor(vpcd): collapse SG subscribers onto network/{topology,policy} managers
Phase 2.6 / mulga-siv-129 slice 2. Rewrites the vpc.create-sg /
vpc.update-sg / vpc.delete-sg NATS subscribers in services/vpcd as
thin wrappers over topology.Manager (port group lifecycle) and
policy.SecurityGroupManager (ACL programming). Deletes the ~1000
lines of duplicated ACL builder and provisioning logic — its
authoritative copy lives in network/policy.
Surface additions:
- ovn.ErrPortGroupNotFound sentinel; mock + live GetPortGroup wrap
not-found via fmt.Errorf("%w: ...") so callers can use errors.Is.
- topology.Manager grows EnsureSGPortGroup / DeleteSGPortGroup
(resolves the apply.go TODO from §2.1 of the redesign plan).
liveManager implements them with GetPortGroup-then-Create /
GetPortGroup-then-Clear+Delete idempotency.
Behaviour delta: the old provisionSG rolled back the OVN port group
on AddACLs failure ("all-or-nothing"). The new path lets the port
group survive and relies on network/reconcile to retry EnsureSG on
its next sweep. The all-or-nothing fail-fast test cases are dropped;
ACL emission semantics are covered by network/policy/sg_test.go.
* refactor(vpcd): migrate VPC/Subnet/ENI subscribers to topology.Manager
Phase 2.6 / mulga-siv-129 slice 3. Rewrites vpc.create / vpc.delete /
vpc.create-subnet / vpc.delete-subnet / vpc.create-port /
vpc.delete-port / vpc.update-port-sgs NATS subscribers as thin
wrappers (≤30 lines each) over topology.Manager. Subscriber bodies
now: parse event → translate to spec → delegate to manager.
Deletes:
- vpcd.subnetGateway (and helpers_test.go + topology_test.go's
TestSubnetGateway block); parity coverage lives in
network/topology.TestSubnetGatewayCIDR.
- vpcd.reconcilePortSGs (the live manager already exposes the same
diff-then-transact via reconcilePortSGs on the L2 side).
- vpcd.TopologyHandler.dnsServer; lmDNSServer (passed via
topology.WithDNSServer to the live manager) is the live path.
Behaviour delta: handlers now strict-parse PrivateIpAddress /
MacAddress / CidrBlock at the NATS boundary and reject malformed
payloads instead of degrading to "no DHCP options". The reconciler
guarantees that field validity is upheld upstream of the publish.
* refactor(network/reconcile): drive SG port groups via topology.Manager
applySGs now calls topology.Manager.EnsureSGPortGroup /
DeleteSGPortGroupByName instead of reaching directly into the OVN client.
Reconcile.Config gains a Topology field (required); the production caller
in services/vpcd passes the TopologyHandler shim, the reconcile package
tests construct a fresh topology.NewLiveManager bound to the mock OVN
client.
DeleteSGPortGroupByName is added to the topology.Manager interface for the
reconciler's orphan-removal path, which iterates raw OVN port-group names
without a groupID round-trip. The existing DeleteSGPortGroup(groupID)
delegates to it.
Resolves the TODO at apply.go:137 carried over from slice 2 of
mulga-siv-129.
* feat(network/policy): add FlowsBarrier option to NATManager
NATManager.AddEIP needs to block on `ovn-nbctl --wait=hv sync` after
writing the dnat_and_snat row so the NATS reply only returns once every
chassis has the rewrite flow. The legacy vpc.add-nat handler does this at
the tail of handleAddNAT; the manager has lacked it since slice 2.1.
NewNATManager grows a functional-options tail (Option / WithFlowsBarrier).
Defaults to a no-op for tests; production wiring in services/vpcd passes
waitForFlowsHV. AddEIP now invokes the barrier after AddNAT, logging at
warn level on failure to match the legacy handler's _ = waitForFlowsHV()
swallowing semantics.
Pre-work for slice 4 of mulga-siv-129 — without the barrier the NAT EIP
subscriber migration would lose the post-write flow-install gate.
* refactor(vpcd): migrate NAT GW subscribers to policy.NATManager
handleAddNATGateway / handleDeleteNATGateway now decode the NATS event
and delegate to policy.NATManager.{AddNATGateway,DeleteNATGateway}. The
manager carries identical OVN logic — same snat type, same ExternalIDs
(spinifex:vpc_id + spinifex:nat_gateway_id) — so existing
TestTopologyHandler_AddNATGateway / DeleteNATGateway suites stay green.
Lazy-constructed NATManager added on TopologyHandler (natmOnce). Mode is
derived from the bridge mode (veth → centralized, direct → distributed)
and the FlowsBarrier is bound to waitForFlowsHV for parity with the
legacy EIP path's tail barrier (used by the next slice, vpc.add-nat).
Slice 4 of mulga-siv-129, sub-step b.
* refactor(vpcd): migrate EIP NAT subscribers to policy.NATManager
handleAddNAT / handleDeleteNAT now decode the NATS event and delegate to
policy.NATManager.{AddEIP,DeleteEIP}. The behavioural contract is
preserved end-to-end:
- Idempotency-skip on a matching dnat_and_snat row (same VPC + LogicalIP,
plus MAC + LogicalPort under distributed NAT) moves into AddEIP so
duplicate vpc.add-nat publishes never tear down the rule the previous
invocation just installed (mulga-siv-124).
- Stale-rule cleanup across every router stays in AddEIP.
- Post-write waitForFlowsHV barrier is now driven by the manager via the
FlowsBarrier option wired in services/vpcd (slice 4a).
- DeleteEIP returns nil on ErrNATNotFound, matching the handler's
fire-and-forget "already absent = success" semantic.
The vpcd "errors" import drops out with the inline error-comparison.
Slice 4 of mulga-siv-129, sub-step c.
* refactor(vpcd): migrate IGW subscribers to external.IGWManager (partial)
handleIGWAttach now branches at decode time:
- Centralised NAT + DHCP-sourced pool keeps using attachIGWLegacy because
the gateway-LRP IP comes from vpc.dhcp.acquire, and that DHCP client is
the vpcd-local manager that bead mulga-siv-125.3.3 will retire.
- All other shapes (distributed NAT, static-range pool, no pool)
delegate to external.IGWManager.AttachIGW. The manager mirrors every
step the legacy handler ran — external switch + localnet port +
gateway LRP + switch-side router peer + default route + chassis HA +
waitForFlowsHV tail barrier — so observable behaviour is unchanged.
handleIGWDetach drops its inline OVN walk entirely; both paths exit
through external.IGWManager.DetachIGW followed by releaseGatewayLRPLease.
The lease release stays in vpcd because the upstream client lives in
services/vpcd/dhcp; calling it after every detach is safe because the
upstream server expires unknown leases on its own.
Lazy-constructed IGWManager added on TopologyHandler (igwmOnce). Pool,
allocator (StaticRangeAllocator), chassis, NAT mode, NAT manager, route
manager, and FlowsBarrier are all derived from the existing
TopologyHandler state.
The DHCP-coupled legacy branch retains its full inline OVN logic; it
will disappear in slice-after-125.3.3 follow-on. Slice 4 of
mulga-siv-129, sub-step d.
* feat(ec2/instance): honor AssociatePublicIpAddress per-NIC override
RunInstances --network-interfaces "AssociatePublicIpAddress=true|false"
was silently ignored, only subnet.MapPublicIpOnLaunch gated public IP
assignment. AWS contract is per-NIC override wins.
Extend TestPrepareRunInstances_PublicIPAutoAssigned to table-driven
3 cases: subnet true no-override, subnet false override true, subnet
true override false.
* refactor(config): drop upstream-DHCP config surface (static WAN pool only)
Hard-error in LoadConfig on legacy keys: [network] external_dhcp,
[nodes.<n>.vpcd] dhcp_bind_bridge, and [[network.external_pools]]
source = "dhcp". Add pool range validation (must fit inside the
gateway/prefix_len CIDR; per-cluster non-overlap).
Strip ExternalDHCP from config.NetworkConfig + formation.NetworkConfig
+ admin.ConfigSettings, and DhcpBindBridge from config.VPCDConfig +
admin.ConfigSettings + vpcd.Config. vpcd.ExternalPoolConfig.IsDHCP()
short-circuits to false; the field and downstream DHCP branches in
external_ipam / topology.go remain for Slice C to delete together with
dhcp_manager.
cmd/spinifex/cmd/admin.go: drop useExternalDHCP path and the
detectedDhcpBindBridge helper; require --external-pool when
--external-mode=pool; auto-detect default no longer infers source=dhcp.
service.go's wan_bridge legacy-key rejection now advises removing the
key entirely (vpcd auto-detects br-wan), not renaming to
dhcp_bind_bridge.
Two topology_test cases that exercise the DHCP gateway-LRP path are
skipped — Slice C deletes attachIGWLegacy and these tests together.
* refactor(vpcd): delete dhcp_manager + DHCP gateway-LRP path (Slice C)
Removes upstream-DHCP-client gateway-LRP allocation in favor of static
WAN-pool allocation (StaticRangeAllocator). Part of bead mulga-siv-125.3.3.
- delete services/vpcd/dhcp_manager.go + dhcp/ subpackage (~865 lines)
- delete allocateGatewayLRPIPViaDHCP + releaseGatewayLRPLease paths
- drop ExternalPoolConfig.Source + DhcpBindBridge + IsDHCP() fields
- drop ExternalIPAllocation lease fields (Expiry/ServerID/HWAddr) and
ExternalIPAMRecord.Source
- drop NewExternalIPAM nc *nats.Conn argument; update all 4 call sites
- rename verifyBridgeMode local dhcpBindBridge -> wanBridge; update error
strings and tests
Slice D (delete attachIGWLegacy + dispatcher) intentionally deferred.
* refactor(vpcd): delete attachIGWLegacy + IsDHCP stub (Slice D)
Closes mulga-siv-129 slice 4d. Part of bead mulga-siv-125.3.3.
handleIGWAttach now unconditionally delegates to external.IGWManager.
attachIGWLegacy (~207 lines, ~5 OVN write steps + chassis scheduling)
deleted along with its dispatcher branch in handleIGWAttach. The
ExternalPoolConfig.IsDHCP() dead stub is gone.
No code paths or NATS subjects regress: the static-pool / distributed
branches were already going through external.IGWManager since Slice 4d
(6719dc3).
* feat(ipam): Purpose field on every IPAM record (Slice B)
Part of bead mulga-siv-125.3.3.
Adds a Purpose enum (handlers/ec2/vpc/purpose.go) tagging every IP
allocation with its semantic role (eni-primary, eni-public, eip,
igw-lrp, natgw-external, …) so multi-VPC clusters can reclaim/audit
by (owner, purpose).
External IPAM (spinifex-external-ipam, v1→v2):
- ExternalIPAllocation.Type → .Purpose; legacy values mapped via
LegacyExternalTypeToPurpose (gateway→igw-lrp, auto_assign→eni-public,
elastic_ip→eip). Unknown legacy values warn and become "unknown".
- AllocateIP / AllocateFromPool / allocateFromPool param rename
allocType→purpose. All call sites pass Purpose* constants.
- migrate/002_external_ipam_purpose.go: idempotent CAS-retry migration
with v1/v2-union record shape so partial migrations resume cleanly.
Internal IPAM (spinifex-vpc-ipam, v1→v2):
- IPAMRecord.Allocated []string → []IPEntry{IP, Purpose, OwnerID}.
- AllocateIP gains purpose+ownerID args; ReleaseIP unchanged (still
keyed on IP).
- AllocatedIPs returns []IPEntry.
- eni.go reorders eniId generation before AllocateIP so the owning
resource ID lands on the new entry.
- migrate/003_ipam_purpose.go: cross-bucket backfill that reads the
ENI bucket via the new RunKVWithJetStream path. Orphaned IPs
(no owning ENI) warn and become Purpose=unknown.
Migrate framework:
- KVContext gains an optional JetStream field; new
Registry.RunKVWithJetStream method threads it through. RunKV
signature unchanged — all other callers are unaffected.
Tests:
- ipam_test.go: AllocateIP signature updates; AllocatedIPs now asserts
IP / Purpose / OwnerID on the returned entries.
- external_ipam_test.go: replaces "auto_assign"/"elastic_ip" literals
with PurposeENIPublic/PurposeEIP and asserts alloc.Purpose.
- migrate/002 + 003 tests: schema-detect, idempotent rerun,
no-JetStream fallback, empty bucket.
* refactor(daemon): tombstone obsolete spinifex-dhcp-leases KV bucket
The dhcp_manager removed in Phase 2.3 (bead mulga-siv-125.3.3) owned the
spinifex-dhcp-leases KV bucket. The migrate framework only handles
per-bucket schema version bumps, not bucket deletion, so the obsolete
bucket would linger on upgraded clusters.
Add a one-shot tombstone after initJetStream that deletes the bucket if
present. DeleteKVBucketIfExists treats ErrBucketNotFound and
ErrStreamNotFound as success, so the call is idempotent across restarts.
* feat(config): add network.ipsec_enabled cluster flag (default true)
Add IPSecEnabled to NetworkConfig in both the cluster TOML schema and
the formation handshake payload. Default true so AWS-parity intra-AZ
encryption is on by default. Operators can flip false in
[network] for trusted single-rack lab topologies.
Phase 2.5 (bead mulga-siv-125.3.5) consumes the flag from admin init
(strongSwan provisioning), formation server (propagates to joiners),
and daemon startup (ovs-vsctl ipsec_encapsulation toggle).
* feat(admin): IPsec peer cert generator signed by cluster CA
Add GenerateIPSecPeerCert + IPSecCertPaths in spinifex/admin so admin
init (and the future admin add-node path) can issue per-node IKEv2 peer
credentials signed by the existing cluster CA. The cert carries
id-kp-ipsecIKE (RFC 4945) so strongSwan accepts it as an IKEv2 peer
credential when ovs-monitor-ipsec materialises tunnel configs.
Cluster CA is reused directly — no intermediate strongSwan PKI today;
when intermediate CAs land that becomes a separate workstream.
The cert/key pair lives under {configDir}/ipsec/peer.{pem,key}; the
daemon points OVS Open_vSwitch.other_config (certificate, private_key,
ca_cert) at these paths when network.ipsec_enabled is true.
* feat(admin): wire IPsec peer cert into admin init + join paths
Add --ipsec bool flag (default true) on adminInitCmd. Single-node init
and the multi-node leader path both emit an IPsec peer cert after the
existing CA+server-cert generation. The multi-node formation server
propagates the IPSecEnabled flag to joining nodes via NetworkConfig;
admin join honours it and emits its own peer cert during the same
cert-issuance step that already produces the server cert.
spinifex.toml template gains an unconditional [network] block carrying
ipsec_enabled so the value is visible to operators on every install
regardless of whether external networking is configured. The daemon
reads it via cluster config (NetworkConfig.IPSecEnabled).
Bead mulga-siv-125.3.5.
* build: install openvswitch-ipsec for OVN native IPsec
openvswitch-ipsec provides ovs-monitor-ipsec, which reads the
Open_vSwitch.other_config cert/key/CA pointers and materialises
strongSwan configs for every Geneve tunnel managed by ovn-controller.
Pulls in strongswan + strongswan-pki as transitive deps.
Required by bead mulga-siv-125.3.5.
* feat(daemon): enable OVN native IPsec on intra-AZ Geneve at startup
When network.ipsec_enabled is true (default), the daemon points the
local OVS DB other_config at the per-node IPsec peer cert that admin
init / admin join provisioned (configDir/ipsec/peer.{pem,key} + the
cluster CA at configDir/ca.pem), then sets
other_config:ipsec_encapsulation=true.
ovs-monitor-ipsec (shipped by the openvswitch-ipsec package) consumes
those pointers and materialises strongSwan configs for every Geneve
tunnel ovn-controller programs — including OVN-IC inter-AZ tunnels
when federation lands in Phase 3a.
Missing cert files log a warning and leave Geneve plaintext; operators
upgrading an older cluster reissue certs via spx admin to close the
gap.
Bead mulga-siv-125.3.5.
* test(e2e): multinode IPsec wiring + xfrm SAs + ESP capture
TestMultinodeIPSec asserts:
- OVS DB on every node carries certificate/private_key/ca_cert pointers
and other_config:ipsec_encapsulation=true (what daemon.enableOVNIPSec
writes).
- ip xfrm state on every node has at least one AEAD SA in AES-GCM mode
(rfc4106(gcm(aes)) or gcm(aes)) within 90s.
- tcpdump catches ESP (ip proto 50) on the underlay (best-effort —
logged only; geneve may be idle during the 5s capture window).
Skips cleanly when the cluster was bootstrapped with --ipsec=false
(no ipsec_encapsulation key on first node).
Read-only over SSH; runs in the parallel bucket alongside the other
non-mutating multinode tests.
* fix(igw): write attachment State="attached" for AWS parity
Reconciler intent loader (network/reconcile/intent.go::loadIGWs) filters
IGW records with `State == "attached"`, but AttachInternetGateway was
writing `State = "available"`. The reconciler therefore never picked up
any attached IGW — `intent_igws=0` on every pass — so the OVN external
switch + gateway LRP + WAN bridge wiring built by IGWManager.AttachIGW
never ran for default-VPC IGWs (whose live `vpc.igw-attach` publish at
daemon bootstrap is lost — vpcd subscriber not yet wired).
Net effect on single-node e2e: every SSH probe to 192.168.x public IPs
timed out (TestSSHProbe, TestModifyInstanceAttribute, TestRebootInstance,
TestNATGateway, TestSGToSGDatapath) because SNAT/DNAT rules on the VPC
router had no path to the external network.
Match AWS InternetGatewayAttachment.State semantics:
- Attach: State="attached"
- Detach: State="detached"
Detach value is internal — recordToEC2 gates Attachments on VpcId != "",
so the detached State is never surfaced to API consumers.
Bead: mulga-siv-131
* fix(reconcile): call AttachIGW when IGW topology missing
applyIGWs previously deferred to the NATS handler when an intent IGW
had no external switch in OVN. When the vpc.igw-attach event is lost
(bootstrap-time default-VPC IGW published before vpcd subscriber is
ready), deferral never resolves and VM public-IP traffic dies.
Call IGWManager.AttachIGW directly — it is idempotent (short-circuits
when the external switch already exists), so the reconciler converges
default-VPC IGWs on first pass without duplicating work on subsequent
passes.
Closes mulga-siv-132.
* fix(test): align NewExternalIPAM call with 2-arg signature
Rebase onto dev pulled in daemon_system_instance_test.go which used
the legacy 3-arg NewExternalIPAM(jsNC, js, pools). The feature branch
already narrowed the signature to (js, pools) via the upstream-DHCP
config drop; align the test with the current signature.
* fix(vpcd): EnsureSubnet must EnsureVPC first to avoid NATS race
vpc.create-vpc and vpc.create-subnet are independent NATS events with
no inter-event ordering guarantee. Tenant bootstrap on iam.account.created
publishes both within <1ms, so the subnet handler's
CreateLogicalRouterPort can race the parent VPC's CreateLogicalRouter and
fail with "logical router not found". The cascade fails CreateNetworkInterface
which fails RunInstances which surfaces as InsufficientInstanceCapacity to
the SDK — masking the underlying topology race.
handleSubnetCreate now calls EnsureVPC(VPCID-only) before EnsureSubnet.
EnsureVPC short-circuits on existing LR (idempotent), so the race-winning
vpc.create-vpc handler's full CIDR/VNI ExternalIDs are preserved; if subnet
wins the race the LR is created with bare ExternalIDs (cosmetic) and the
follow-on vpc.create-vpc short-circuits.
Adds TestIntegration_SubnetBeforeVPC regression covering both orderings.
Closes mulga-siv-133.
* feat(ansible): require --external-pool, drop NAT, forward EXTRA_VARS
spx admin init now rejects --external-mode=nat and demands --external-pool
when mode=pool. The ansible init role silently skipped pool flags when the
range was unset, so installs fell over inside the spx validator. Make
targets also swallowed `-e` (make's env-override flag), so operators could
not override pool start/end without editing defaults.yml.
- vars/defaults.yml: rename nat_gateway_ip → external_gateway_ip; add
spinifex_external_no_external opt-out; document the spx flag contract.
- roles/init/tasks/main.yml: drop NAT branch; assert pool range upfront
with a fail_msg pointing at EXTRA_VARS / defaults.yml; emit gateway,
prefix-len, gateway-ip only when explicitly set (let spx auto-detect);
honour --no-external.
- playbooks/dev-reset.yml: rename captured var; coerce legacy
external_mode=nat to pool with a warn; tighten gateway regex with \b.
- Makefile: ansible-dev-* targets now forward EXTRA_VARS="key=val ..."
through --extra-vars so `make` callers can override without editing
defaults.yml.
- scripts/ansible/README.md: document pool requirement, both invocation
styles (direct -e vs make EXTRA_VARS), NAT removal.
* fix(ipsec): guard ipsec_encapsulation on ovs-monitor-ipsec liveness
enableOVNIPSec set OVS cert pointers + ipsec_encapsulation=true without
ensuring ovs-monitor-ipsec.service was running. Without that daemon, OVS
holds the cert pointers unused, strongSwan never gets IKE config, and
tunnel traffic ovn-controller marks for encryption gets silently
dropped. TestMultinodeIPSec fails on `node1 xfrm has no AEAD SAs`.
- systemd: spinifex-daemon Wants=/After= ovs-monitor-ipsec.service
- daemon: ensureOVSMonitorIPSecActive — systemctl enable --now +
is-active poll; refuses to flip ipsec_encapsulation if daemon is dead
- daemon: single-node short-circuit — no peers means no tunnels means
the flag is at best inert and at worst load-bearing-silent-drop
- ci: capture-net-diag.sh + workflow steps to snapshot OVS/OVN/xfrm
state on failure, fan out across all 3 multinode nodes
Refs: mulga-siv-136
* test(e2e): sticky-skip downstream SSH tests when probe fails
When TestSSHProbe times out (3 min, typically because of mulga-siv-134
datapath bug), four downstream tests each re-probe SSH on the same
broken datapath and time out identically — single-node job runs ~24 min
instead of ~12 min, with the same error logged five times.
First waitForSSHReady timeout now sets a package-level atomic flag;
subsequent waitForSSHReady / trySSHReady / requireSSHHealthy calls skip
immediately. Preserves the original red signal on TestSSHProbe and on
any test that genuinely needed SSH (Skip ≠ Pass). Bool variant
(trySSHReady) consults but does not set the flag — its caller already
treats False as advisory warning, not fatal.
TestSGToSGDatapath has its own EventuallyErr SSH wait (not via
waitForSSHReady) and needs an explicit requireSSHHealthy(t) gate at
the top of runSGToSGDatapath. TestNATGateway already calls
waitForSSHReady first so the gate fires naturally.
Refs: mulga-siv-137
* fix(ipsec): use Debian unit name openvswitch-ipsec.service
CI artifact shows `Unit ovs-monitor-ipsec.service could not be found`
on every node. Debian's openvswitch-ipsec package ships the unit as
openvswitch-ipsec.service (the binary inside is ovs-monitor-ipsec, but
systemd's name follows the package). The previous commit guarded on
the wrong unit name, so:
- spinifex-daemon.service Wants=/After= silently no-op'd (missing unit)
- enableOVNIPSec's `systemctl enable --now ovs-monitor-ipsec.service`
failed, daemon logged a warning and continued without flipping
ipsec_encapsulation=true
- TestMultinodeIPSec skipped with `node1 reports ""` because OVS DB
never received the cert pointers
Rename across all 5 spots (daemon, systemd unit, test, CI diag script,
workflow journal capture) to match the Debian package layout.
Note: the package itself still must be present on the CI VM image —
that's tracked in the mulga repo (image-builder provision.sh +
bootstrap-install.sh shim).
Refs: mulga-siv-136
* fix(e2e): authorize default SG tcp/22 + icmp in single-node fixture
admin init leaves the default SG closed (AWS parity); the Go single suite
never ported the Phase-5 SG-ingress block that run-e2e.sh has had since day
one, so every test runner SSH/ping probe hits the OVN port-group ACL drop.
- ec2helpers: add AuthorizeICMPIngress + EnsureDefaultSGOpen helpers.
- single/main_test: open default SG once per process in pkgFixOnce.Do.
- witness: extend ensureDefaultSGSSHIngress to authorize ICMP too.
- run-e2e.sh: append matching ICMP authorize next to tcp/22 block.
mulga-siv-134
* fix(network/reconcile): key DHCP_Options lookup by subnet_id not CIDR
Multi-tenant default VPCs share the same subnet CIDR (172.31.0.0/20) per
account. The existing FindDHCPOptionsByCIDR gate at apply.go:107 found
the first account's DHCP_Options row and skipped creation for every
subsequent subnet with the same CIDR. Those subnets' ports then attached
nothing (FindDHCPOptionsByExternalID misses on subnet_id), VMs got no
DHCPv4 lease, and SSH/ICMP into them silently failed even though SG
ACLs and NAT were correct.
Switch the gate to FindDHCPOptionsByExternalID keyed on spinifex:subnet_id
so each subnet owns its own row, matching the attach lookup at line 203.
Verified: account 000000000001 default VPC RunInstances now produces an
LSP with dhcpv4_options populated, VM cloud-init reports a 172.31.0.5/20
lease + default route via 172.31.0.1, and ping + ssh TCP handshake to
the EIP succeed end-to-end. Stale DHCP_Options row for the prior dead
subnet was wiped manually; reconciler recreated the correct row for the
live subnet on its next pass.
* fix(ipsec): enable openvswitch-ipsec at provision time, drop daemon write
Provisioning now runs `systemctl enable --now openvswitch-ipsec.service`
alongside openvswitch-switch and ovn-controller. The spinifex-daemon
process drops its `enable --now` shell-out and only polls is-active.
Sudoers gains one read-only line:
spinifex-daemon ALL=(root) NOPASSWD: /usr/bin/systemctl is-active openvswitch-ipsec.service
This mirrors the existing vpcd ovn-controller is-active precedent and
removes the daemon's need for systemd-write capability. Aligns with
least-privilege service account pattern: provision enables services,
daemon only reads status.
If the unit is inactive at runtime, the daemon refuses to flip
ipsec_encapsulation=true (silent-drop guard from mulga-siv-136) and
surfaces a clear error pointing at scripts/setup-ovn.sh.
* chore: unblock preflight on feat/network-layer-redesign
Two pre-existing failures blocked preflight on the branch:
- govulncheck flagged golang.org/x/net@v0.54.0 (GO-2026-5026, ASCII Punycode
rejection bug in idna.ToASCII); reached via utils.DownloadFileWithProgress.
Bump to v0.55.0; go mod tidy carries x/sys to v0.45.0.
- TestTopologyHandler_SubnetCreate_RouterPortFails asserted subnet create
fails when the parent VPC router is missing. That contract changed in
|
||
|
dependabot[bot]
|
ef097bf4ab | chore: bump actions/setup-go from 5 to 6 in the github-actions group (#251) | ||
|
joshsiv-mulga
|
80ab3fb37a |
ci: prune rootless docker + trap container leaks in microvm build
Self-hosted runner accumulated 18GB in overlay2 from leaked container layers. Two causes: build-microvm-image.sh only removed the alpine container on the success path, and no workflow step pruned docker between runs. - scripts/build-microvm-image.sh: container id now removed via the existing EXIT trap, so failures, signals, and runner kills no longer leak the writable layer. - .github/workflows/e2e-go.yml: prune containers / dangling images / buildx cache before each Build Install Artifacts step, in all three e2e jobs (single, multinode, reboot). |
||
|
Josh Siviour
|
bedc35344f |
feat(e2e/multinode) (#242)
* feat(e2e/harness): multinode cluster wait helpers + AWSClientForGateway (Stage A)
Stage A of mulga-siv-90. Compile-only; no tests wired yet.
multinode_cluster.go:
- Cluster.WaitNATSPeers polls /routez per node, dedupes by remote_id.
want=2 on healthy 3-node, =1 after a node-down event.
- Cluster.WaitPredastoreHealthy / WaitGatewayHealthy probe HTTPS per node
via insecureHTTPClient (multinode certs are self-signed across peers).
- Cluster.WaitDaemonReady runs DescribeInstanceTypes through every
node's gateway, not just env.ServiceIPs[0] — catches a daemon that's
only registered on one node.
multinode_aws_via.go:
- AWSClientForGateway clones *Env, swaps ServiceIPs to a single node's
Addr, returns a fresh AWSClient. Lets phases 6/7 issue describe/
stop/start across every node in turn (bash aws_via equivalent).
Init/Join helpers deferred to the pseudo-multinode bead (mulga-siv-91)
where they belong — real-multinode bootstrap is owned by tofu +
bootstrap-install.sh before the Go suite starts.
* feat(e2e/multinode): TestMultinodePreflight + TestMultinodeClusterHealth (Stage B)
Stage B of mulga-siv-90. First runnable Test* against a 3-node cluster.
multinode/main_test.go:
- Package-scoped singleton fixture, mirrors single/main_test.go.
- requireMultiNodeFixture skips when SPINIFEX_E2E unset or mode != multinode.
- Fixture = {Env, AWS, Harness, Cluster, Artifacts, TmpDir} — adds Cluster
to the single-node shape via harness.ClusterFromEnv (reads SPINIFEX_NODES
+ SPINIFEX_SSH_USER/KEY).
- TestMain drains harness.Fixture.Close + removes TmpDir at process exit.
multinode/helpers_test.go:
- needAZ / needInstanceTypeArch / needAMI shims (memoized via harness).
- readyNodeCount substring counter — matches bash `grep -c "Ready"`.
multinode/tests_test.go:
- Top-level Test* wrappers (TestMultinodePreflight, TestMultinodeClusterHealth).
multinode/preflight_test.go (phase 1):
- /dev/kvm writable check (no /dev/kvm = test environment is wrong, fail fast).
- peer_ssh hostname on every remote node. Skips node[0] to match bash —
the runner's loopback SSHd is not part of the contract.
multinode/cluster_health_test.go (phase 2):
- Cluster.WaitNATSPeers >= 2 per node.
- Cluster.WaitPredastoreHealthy / WaitGatewayHealthy across nodes.
- Cluster.WaitDaemonReady (DescribeInstanceTypes per gateway).
- spx get nodes shows N Ready, where N = cluster size.
- spx get vms returns (length only — content may be empty).
* feat(e2e/multinode): TestMultinodeInstanceDistribution + GuestSSH (Stage C)
Stage C of mulga-siv-90. Phase 3 (distribution) + phase 4 (guest SSH).
harness/multinode_distribution.go:
- InstanceHostingNode: SSH each peer, ps grep qemu-system | <id>.
Reuses NewPeerSSH; returns nil on no match (caller decides fatality).
- CountInstancesPerNode + AssertSpreadAcrossNodes: fan-out + minNodes
gate. Bash phase 3 warns-on-stacking; Go matches by accepting
minNodes=1 + caller-side log.
harness/multinode_guest_ssh.go:
- GuestSSHPort polls hosting node's qemu cmdline for hostfwd=tcp:...
reusing the existing hostfwdRE from ec2helpers.go (single regex, two
capture groups: host + port).
- GuestSSHEndpoint prefers PublicIpAddress, falls back to hosting-node
+ hostfwd. Mirrors the phase 4 conditional.
- GuestSSHReady polls `echo ready` via SSH with bash-equivalent -o flags.
multinode/helpers_test.go:
- needKeyPair (EnsureKeyPair shim).
- needInstanceTrio: pkg-level sync.Once launches 3 nano instances on
default VPC, registers terminate-on-process-exit. Phase 4+ reuse the
same trio without re-launch.
multinode/distribution_test.go (phase 3):
- launch trio + assert >= 1 node hosting (log warn on stacking).
- spx get vms contains every trio ID.
multinode/guest_ssh_test.go (phase 4):
- For each trio instance: resolve endpoint, poll SSH ready, assert id
reports ec2-user, log lsblk line count.
multinode/tests_test.go: TestMultinodeInstanceDistribution + TestMultinodeGuestSSH.
* feat(e2e/multinode): TestMultinode{Volume,CrossNodeGateway,CrossNodeOps} (Stage D)
Stage D of mulga-siv-90. Phases 5/6/7 — pure AWS API exercise (no
node-state churn).
volume_test.go (phase 5):
- Create 10GiB volume in discovered AZ, attach to trio[0] at /dev/sdf,
detach, delete. Inline lifecycle — DeleteVolume in-test would race a
registered Ensure* cleanup, surface as InvalidVolume.NotFound.
gateway_test.go (phase 6):
- Baseline DescribeInstances via the local gateway, then fan out
AWSClientForGateway per non-local node. Require.Equal across all —
cross-node fan-out regression surfaces immediately.
crossnode_ops_test.go (phase 7):
- Find trio[0]'s hosting node, stop via a different gateway, start via
a third (or same other on 2-node fallback). Returns to running so
later Test*s (phase 4 SSH, etc.) don't cascade-fail. otherTwoGateways
mirrors the bash fallback chain.
* feat(e2e/multinode): TestMultinodeNode{Failure,Recovery} (Stage E)
Stage E of mulga-siv-90. Phase 8 (failure) + phase 9 (recovery) +
diagnostic primitives.
harness/multinode_node_lifecycle.go:
- StopNode SSHes `sudo systemctl stop spinifex.target`. Non-fatal on
exit error (bash matches — cluster shutdown races the SSH conn).
- StartNode mirrors with sudo systemctl start.
- WaitNodeServiceReady polls a single node's HTTPS gateway. Distinct
from cluster-wide WaitGatewayHealthy so a recovering node can be
tracked without re-checking peers.
harness/multinode_diag.go:
- DumpAllNodeLogs fans out journalctl -u 'spinifex-*' per node into
artifactsDir/journal-<node>.log. Tolerates per-node SSH failure.
- SpxGetNodesAcrossCluster strips trailing whitespace off SpxGetNodes.
multinode/node_failure_test.go (phase 8):
- Stop node2, register t.Cleanup restart safety net.
- WaitNATSPeers want=1 (degraded), DescribeInstanceTypes via node1+node3,
DescribeInstances still returns the trio.
multinode/node_recovery_test.go (phase 9):
- StartNode node2 (idempotent — phase 9 in isolation still works).
- WaitNATSPeers want=2, WaitNodeServiceReady, spx get nodes 3 Ready,
DescribeInstanceTypes via the recovered gateway.
* feat(e2e/multinode): TestMultinodeVPCNetworking (Stage F)
Ports phase 10 from run-multinode-e2e.sh. Stands up a fresh non-default
VPC + subnet (10.200.0.0/16 + 10.200.1.0/24), launches 3 instances into
the subnet, then asserts:
- PrivateIpAddress is non-empty and matches 10.200.1.0/24
- All 3 IPs are unique
- SubnetId / VpcId on the instance match the freshly-created ids
- IPs persist across stop -> start cycles
Independent of the package-level trio (which uses the default VPC) —
this phase needs full control over subnet allocation so resources are
created and cleaned up inline via t.Cleanup (LIFO: instances ->
subnet -> VPC).
* feat(e2e/multinode): TestMultinodePlacementAndNAT (Stage G)
Ports phase 11 from run-multinode-e2e.sh — the largest single phase
(~340 bash lines covering spread placement + NAT Gateway egress). Eight
sub-steps preserved with matching harness.Step markers so the Go run
cross-references cleanly with the bash log:
Step 1: VPC + pub/priv subnets + IGW + main RT route + 2 SGs
(bastion: tcp/22 anywhere; private: tcp/22 from bastion-sg,
icmp from VPC)
Step 2: bastion launch, wait SSH, scp key
Step 3: spread placement group + 3 private instances via the group
Step 4: validate spread (>=2 unique hosting nodes; >=3 = full PASS)
Step 5: pre-NAT baseline — confirm NO internet from private VMs
Step 6: allocate EIP + create NAT GW + private RT + 0.0.0.0/0 -> NGW
Step 7: post-NAT — every private VM reaches 8.8.8.8 via NAT GW
Step 8: inline teardown of NAT GW + private RT + EIP
Each resource is owned by the test (no Ensure* memoization) so a failure
mid-flight tears the full VPC graph down via t.Cleanup in LIFO order,
matching the bash teardown sequence. NAT GW state polling is duplicated
locally (waitForNATGatewayStateFatal/Best); the equivalents in
single/natgw_test.go are unexported. Promote to harness/poll.go once a
third consumer lands.
* ci(e2e-go): add multi-node Go E2E job + cert/lb on 3-node cluster (Stage H)
Adds e2e_go_multinode as a parallel job alongside e2e_go_single on the
e2e-go workflow. The single-node job is untouched apart from extending
its SUITES filter to drop the multinode suite (which only runs on the
ci-multi cluster).
What the new job does:
- Provisions a 3-node tofu cluster via the same build-install-artifacts
+ bootstrap-install path as e2e_real_multi (bash).
- Builds multinode.test / cert.test / lb.test on the runner, ships
them to node1.
- Runs each suite with SPINIFEX_MODE=multinode and the cluster csv
in SPINIFEX_NODES / SPINIFEX_NODE_IPS. cert / lb branch internally
on env.Mode so the same binaries cover both single + multi.
- Pulls per-node journals (spinifex-journal-node1..N.log) for the
e2e-analyze action so a node2/3 failure isn't blind.
- Same JUnit + analyze + artifact-upload + status pipeline as the
single-node job.
Other moves:
- Default SUITES now includes e2e-multinode so push triggers fan
out across single + multi automatically. e2e_go_reboot stays
explicit-opt-in (unchanged).
- tests/e2e/Makefile: e2e-multinode now sets MODE=multinode so
`make e2e-multinode` doesn't fall back to single (which would
skip every TestMultinode* on the SPINIFEX_MODE check).
- tests/e2e/TEST_COVERAGE.md: cross-reference the Go port at the
head of the Real Multi-Node section. The bash driver stays in
place as executable spec until the Go run is soak-tested.
- e2e_go_status now needs e2e_go_multinode; multi=skipped counts
as success so a single-only dispatch still posts green.
* fix(e2e/multinode): NATS routez via peer_ssh + StartNode timeout + spx best-effort
CI run 26161792146 surfaced three regressions in the freshly-landed
multinode suite:
1. WaitNATSPeers dialled node.Addr:8222 directly. NATS monitor binds
127.0.0.1:8222 only (cmd/spinifex/cmd/templates/nats.conf:65), so
every routez poll returned "connection refused". Switched to
peer_ssh + curl http://127.0.0.1:8222/routez per node — matches
the bash run-multinode-e2e.sh phase 2 pattern.
2. StartNode / StopNode capped ssh at a 30s context. spinifex.target
has 6+ dependent units (predastore, NATS, awsgw, vpcd, daemon, ui)
and a clean systemctl start runs 60-90s; the 30s budget was
killing ssh mid-command ("signal: killed"). Bump StartNode to 5min
and StopNode to 3min.
3. SpxGetVMs is best-effort in bash (`spx get vms --timeout 5s
2>/dev/null` with no exit-code check) because the CLI's NATS dial
can race the cluster join shortly after bootstrap. The Go port
fatal'd on non-zero exit and broke TestMultinodeClusterHealth +
TestMultinodeInstanceDistribution downstream. Added
harness.SpxRunBestEffort and rewired both call sites.
* fix(e2e/multinode): spx CLI lenience + trio capacity retry + diag
Run 26163994815 cascaded from two issues that bash silently tolerated.
The Go port hard-failed where bash counts the failure and continues, so
3+ tests cascaded off transient first-failures.
- spx get nodes: cluster_health + node_recovery now downgrade <Ready
count to WARN with SpxRunBestEffort, matching bash phase 2
fail_test counter and phase 9 `|| echo ""`. Gateway+daemon health
checks above already prove end-to-end NATS routing.
- needInstanceTrio: retry RunInstances up to 6× on
InsufficientInstanceCapacity (10s backoff). Daemon resourceMgr can
briefly report 0 capacity right after node bootstrap before its
first inventory scan completes — AWS itself surfaces this
transiently. Stagger 2s between launches to match bash phase 3.
- CI workflow: new "Pre-flight diagnostics on node1" step dumps
groups/perms/spx output/systemctl status/journal tail to
preflight-diag.log so next run's artifacts surface what tf-user
sees before the test binary starts.
* fix(e2e): strip SPINIFEX_* from spx child env
Root cause of `spx get nodes` returning "nats: no servers available for
connection" in the multinode Go suite (mulga-siv-90 runs 26163994815,
26195522455): spx CLI calls viper.AutomaticEnv() with prefix "SPINIFEX"
inside config.LoadConfig. The CI workflow exports SPINIFEX_NODES (csv
of cluster WAN IPs) so harness.ClusterFromEnv can build the *Cluster.
viper picks SPINIFEX_NODES up as the `nodes` config key and silently
clobbers the loaded `[nodes.*]` map → nodeConfig.NATS.Host = "" →
nats.Connect("") → ErrNoServers.
Bash never set SPINIFEX_NODES so the bash port was unaffected. Direct
ssh `spx get nodes` from the runner also worked because the env was
clean. Only the test-binary-spawned spx hit the collision.
Fix: SpxRun / SpxRunBestEffort build a sanitized child env that
preserves the small SPINIFEX_* set spx's root command explicitly
BindEnvs (config path, AWS keys, host, base-dir, NATS dial overrides)
and drops everything else.
* fix(vpcd): make handleAddNAT idempotent (mulga-siv-124)
PR #232 (commit
|
||
|
Josh Siviour
|
050ac8f861 |
feat(e2e): Go E2E harness + single-node migration to Ensure*/Discover* + reboot suite (#241)
* feat(e2e): add Go test harness + cert scenario, port run-cert-e2e.sh
Lands step 1 of docs/development/improvements/e2e-go-harness.md:
shared harness primitives (env, wait, artifacts, cert, tls) plus the
TestCertIssuance scenario that supersedes run-cert-e2e.sh. All files
gated by //go:build e2e so default builds and `make preflight` are
unaffected. Bash script stays in place for one CI cycle before deletion.
* feat(e2e): port run-lb-e2e.sh to TestLoadBalancer Go scenario
Step 3 of docs/development/improvements/e2e-go-harness.md. Replaces 1246
lines of bash with a typed Go scenario exercising all 4 LB variants
(ALB/NLB × internet-facing/internal) against a shared VPC + app instance
pool. Internet-facing phase auto-skips when no peer node is configured;
internal phase always runs.
Adds shared harness primitives:
- harness/aws.go: AWS SDK client factory wired to Spinifex AWS gateway
- harness/lb.go: WaitForLBActive, WaitForTargetsHealthy, WaitForENICleanup,
WaitForInstanceRunning/Terminated, InstanceENI
- harness/traffic.go: HTTPRoundRobin, TCPRoundRobin, distribution asserts
- harness/ssh.go: minimal peer SSH wrapper shelling out to /usr/bin/ssh
(replaced by typed x/crypto/ssh client hoisted from DDIL in mulga-siv-74)
User-data scripts embedded via //go:embed under lb/testdata/.
Bash script stays in place for one CI cycle before deletion.
* fix(e2e): log client launch params + dump daemon log on InvalidInstanceType
Adds diagnostics for the LB internal client launch path. Logs the exact
InstanceType, AMI, subnet, key name, and user-data size right before
RunInstances, and registers a daemon-log dump on failure so we can
correlate the 400 InvalidInstanceType with what spinifex saw.
* refactor(e2e): serialise LB suites + share probe client across internal tests
Splits TestLoadBalancer into 4 sequential subtests (ALB/NLB ×
internet-facing/internal). Each suite creates its own TG + LB + listener,
runs its traffic test, and tears down before the next starts. Replaces
the per-suite throwaway client VM with a single long-lived probe server
launched at fixture setup; per-suite internal traffic tests GET
/probe?ip=...&proto=... against it instead of cold-booting a fresh client.
Drops peak instance count from 5 to 4 (2 app + 1 LB + 1 client), so the
internal phase passes on capacity-constrained dev nodes that previously
hit InvalidInstanceType (see mulga-siv-76, mulga-siv-77 for the underlying
spinifex bugs).
* feat(daemon): make hostReserve env-configurable for dev capacity squeeze
Adds SPINIFEX_RESERVED_VCPU and SPINIFEX_RESERVED_MEM_GB env-var overrides
read at daemon startup. Invalid values are logged and ignored so a typo
doesn't silently widen the reserve. Unblocks the LB E2E on capacity-tight
dev hosts (8 vCPU box: default 2-vCPU reserve + 3x t3.nano test load
leaves 0 free for the sys.micro LB VM). Lays groundwork for the planned
operator-tunable [capacity] config.
bead: mulga-siv-78
* fix(e2e): revert LB to per-suite client + fail-fast on terminal LB state
Reverts the shared probe-server VM that wouldn't come up reliably during
the InternalFacing suites — back to the proven bash pattern of launching
a fresh client VM per suite (one of ALB_IP / NLB_IP populated based on
the suite kind). Adds renderClientUserData + a conditional template so
each client probes only its target LB.
WaitForLBActive now bails immediately on terminal LB states (failed,
provisioning_failed) and emits a "still waiting" log line every 30s so
hangs are visible instead of silently burning the full 5-minute timeout.
* ci(e2e): add e2e-go.yml workflow + GOTESTSUM Makefile opt-in
Standalone workflow runs the new Go-based E2E harness on the existing
ci-single self-hosted runner — provisions a tofu VM, bootstraps spinifex,
installs gotestsum, runs each requested suite via the e2e Makefile, and
uploads per-test artifacts + JUnit XML + JSON streams as a build artifact.
Test summary parses the JUnit and emits ::error file=...:: annotations so
failures surface in the PR diff.
Gated to the feat/e2e-go-harness branch + workflow_dispatch so it doesn't
interfere with the existing e2e.yml while the Go conversion lands.
tests/e2e/Makefile gains a GOTESTSUM=1 opt-in: when set, the e2e target
runs gotestsum with --junitfile and --jsonfile rooted in ARTIFACT_DIR
under a suite-tagged filename derived from the first PKG component.
* feat(e2e): share probe client across both internal LB suites + SG fixes
- Replaces per-suite probe client with a single shared VM launched in the
fixture. Saves ~60s by avoiding a cold boot between the ALB and NLB
internal suites.
- Client cloud-init exposes a JSON trigger endpoint on :9090 in addition
to the http.server on :80 (results dir). Each suite POSTs
{proto, ip, count, outfile, http_port, tcp_port} to run a probe loop
against the LB private IP and writes the result file under /tmp/httpd
for the driver to fetch back.
- configureDefaultSG now uses the structured IpPermissions form (top-level
shortcut is silently ignored by vpcd — tracked separately) and opens
port 9090 in addition to 80 + 9000.
- deleteLB captures the underlying sys.micro VM id via the LB ENI before
delete, then polls DescribeLoadBalancers until LoadBalancerNotFound so
the next suite doesn't race the capacity reclaim.
- Internal_NLB sleeps 15s up front to let the ALB sys.micro deallocate
fully before its own createLB fires. DescribeLoadBalancers can report
the ALB gone before the vCPU/memory allocation is actually released on
capacity-tight dev hosts; without this settle, NLB's createLB trips the
sys.micro reserve and lands in terminal state=failed. Still cheaper
than cold-booting a per-suite client.
* ci(e2e): install Go on tofu VM before running Go E2E suites
The tofu-provisioned VM ships with the spx binary and bash test scripts
but no go toolchain, so the prior workflow's "Install gotestsum on VM"
step failed with `bash: line 2: go: command not found`. Add a curl-based
Go 1.26.3 install (matching go.mod) ahead of the gotestsum install and
update the test step's PATH so make e2e-* runs the freshly-installed
go binary.
* ci(e2e): bump gotestsum to @latest for Go 1.26 compatibility
gotestsum v1.12.0 pins golang.org/x/tools v0.19.0 which fails to compile
under Go 1.26 with:
invalid array length -delta * delta (constant -256 of type int64)
Switching to @latest pulls a newer x/tools that builds clean.
* ci(e2e): ship spinifex source to VM so make -C tests/e2e can run there
Single-node tofu VM only has the spx binary + bash test bundle at
~/e2e-tests; the Go e2e workflow was running 'make -C tests/e2e e2e-cert'
from $HOME/Development/mulga/spinifex which doesn't exist, producing:
make: *** No rule to make target 'e2e-cert'. Stop.
Add a checkout of the spinifex repo on the runner and rsync it (minus
.git, build/, bin/, node_modules) to the VM as
~/Development/mulga/spinifex before installing Go + gotestsum.
Interim solution; mulga-siv-80 tracks replacing the rsync with shipping
pre-built test binaries from the runner.
* ci(e2e-go): replace rsync with tar-over-ssh; VM lacks rsync
bootstrap-install.sh ships a minimal binary VM with no rsync; the
ship-source and collect-artifacts steps failed with
'rsync: command not found'. Stream a tarball over ssh instead — same
exclude list, no extra dependency on the VM.
* fix(e2e): discover single-node IPs + awsgw bind in LoadEnv
run-cert-e2e.sh single mode probes awsgw.host from spinifex.toml and
adds every non-loopback global IPv4 to the node list. The Go harness
defaulted to 127.0.0.1 only, so CI on a tofu VM (awsgw bound to the
LAN IP, not loopback) saw 'connection refused' on every TLS check.
Port the same discovery: ModeSingle now walks net.InterfaceAddrs for
NodeIPs and grep-parses spinifex.toml for the awsgw bind. Both stay
overridable via SPINIFEX_NODE_IPS / SPINIFEX_SERVICE_IPS.
* ci(e2e-go): pre-build test binaries on runner; drop go toolchain from VM
Replaces the source-tree + go + gotestsum payload that the e2e-go.yml
workflow previously shipped to the tofu CI VM with self-contained
test binaries built on the runner via `go test -c`. testdata for the
LB suite is already //go:embed'd into the binaries, so the bundle on
the VM is just `<suite>.test` files (cert: 14M, lb: 17M uncompressed).
Workflow changes
- actions/setup-go on runner.
- New step builds binaries via `make e2e-build SUITES_BUILD=...`.
- Install go-junit-report on runner; convert each VM-side test log to
junit-<suite>.xml after artifact pull so "Publish test summary" still
parses JUnit XML.
- Drop "Install Go + gotestsum on VM" entirely (saves ~60s + network).
- Drop source-shipping rsync/tar (saves ~30s + a lot of bandwidth).
- VM step runs `./<suite>.test -test.v -test.timeout=30m` directly.
Makefile changes
- New `e2e-build` target compiles each `SUITES_BUILD` entry into
`BIN_DIR/<suite>.test` via `go test -c -tags=e2e`. `clean` also
removes BIN_DIR.
Closes mulga-siv-80.
* ci(e2e-go): disable setup-go cache; upload dominates self-hosted run time
* refactor(e2e): hoist generic DDIL harness primitives to shared tests/e2e/harness
Step 1.5 of docs/development/improvements/e2e-go-harness.md. Promotes
Cluster/Node/SSH/DaemonClient/LocalStateRevision/ResetAllNodes/Witness
into the shared package so the LB, multinode, and BM scenarios in
steps 4-5 can build on the same primitives instead of duplicating SSH
+ cluster plumbing.
Moves
- ddil/harness/{cluster,ssh,daemon_client,state,reset,witness}.go
-> harness/ (plus the witness testdata embed dir).
- ddil/harness/{fault,netem,profiles,snapshot}.go -> ddil/fault/ as a
new package; fault.PartitionNode/HealNode/KillNATS/StartNATS/
RestartDaemonOnly/ApplyNetem/ClearNetem/LinkProfile*/TakeSnapshot
now take harness.Cluster / harness.Node / harness.SSH explicitly.
- ddil/harness/retry.go::Run retry-with-reset extracted as
harness.RetryWithReset in harness/wait.go; ddil/harness/quarantine.go
keeps the DDIL-only quarantine wrapper that calls into it.
- WaitForMode moved from fault.go to harness/daemon_client.go since
it polls daemon state and has no fault-injection concern.
- The pre-hoist harness/ssh.go (PeerSSH, subprocess ssh) is preserved
as harness/peer_ssh.go so the lb_test suite keeps working unchanged;
the typed x/crypto/ssh client from DDIL now owns harness/ssh.go.
- New harness/util.go exports ShellQuote (was unexported shellQuote in
netem.go) so both ddil/fault and reset.go/witness.go can use it.
Env var rename
- SPINIFEX_NODES / SPINIFEX_SSH_USER / SPINIFEX_SSH_KEY replace
DDIL_NODES / DDIL_SSH_USER / DDIL_SSH_KEY. Old names still honoured
with a stderr deprecation note (envWithLegacy) so the DDIL CI keeps
passing until .github/workflows/e2e-ddil.yml drops the old names.
DDIL_QUARANTINED stays DDIL-specific.
DDIL parity preserved — scenarios still call ddilh.Run for quarantine
semantics; the underlying retry-with-reset is the same code path,
just shared.
Closes mulga-siv-74.
* fix(e2e): open default SG :22 ingress via structured form before witness launch
The daemon currently drops the top-level shortcut AuthorizeSecurityGroupIngress
form silently (mulga-siv-79), so the default SG starts with no inbound :22 and
the witness EIP awaitBaseline tunnel times out under DDIL CI. Mirror the
workaround already present in lb_test by issuing the structured IpPermissions
form before LaunchWitnessVM. Idempotent on InvalidPermission.Duplicate so reruns
in the same cluster are safe.
* ci: render JUnit into job summary + collapsible groups in noisy steps
Add a reusable composite action (.github/actions/junit-report) that parses
a glob of JUnit XML files, writes a totals table + collapsible per-failure
details into $GITHUB_STEP_SUMMARY, and emits one ::error annotation per
failed/errored test case so failures surface in the run header instead of
being buried in step logs.
Apply the action to both e2e-go.yml and e2e-ddil.yml (e2e-ddil gotestsum
now also emits --junitfile so the action has input).
Same workflows also wrap noisy phases (tofu apply/destroy, scrub-env,
tar-over-ssh, per-suite test runs, cluster-log collection) in
::group::/::endgroup:: markers so the Actions UI collapses the chatter
by default and the human can expand only the failing phase. Tofu output
still tees to $TOFU_LOG so the artifact bundle is unchanged.
Future workflows (multinode, baremetal) can adopt the same pattern via
the README in .github/actions/junit-report.
* test(ddil): quarantine Scenario C until predastore §2 lands
CI run 26016840819 surfaced that ScenarioC_CleanPartition silently
depends on predastore-ddil-hardening §2 (write-quorum with deferred
parity repair). Root cause from node3 daemon log:
predastore: write udp ...->192.168.0.22:9991: sendmsg: operation not permitted
predastore: putObjectViaQUIC: put failed
spx QMP: BLOCK_IO_ERROR instanceId=<witness>
spx: StopOrTerminateInstance: Terminating
spx: Instance state transition running → shutting-down
The 'sendmsg: operation not permitted' is the EPERM Linux returns when
iptables drops an outbound packet — exactly the OUTPUT DROP rules
PartitionNode installs. The witness VM's block I/O is backed by
distributed predastore, so the same partition that severs node3↔peer
NATS traffic also severs the witness disk's cross-shard QUIC writes.
QEMU power-downs the guest after BLOCK_IO_ERROR, the daemon's
reconciler terminates the instance, and the next AssertProgressed dials
a sshd that's already gone (hence the 'handshake failed: EOF' the test
reports).
Quarantine by collapsing C to the same scenarioSkip stub D/E/F already
use, citing predastore-ddil-hardening §2 as the dependency. Flip C
back to ENABLED in the same PR that lands §2 — that's when the witness
disk can survive a peer partition without QEMU halting.
TEST_COVERAGE.md row C flipped ENABLED → SKIPPED; added a quarantine
note explaining the predastore dependency.
* ci: colored phase banners + quiet-on-success tofu output
Pretty up the live Actions log without flooding it. Three changes:
1. .github/scripts/ci-fmt.sh — sourceable bash helpers (banner, ok, bad,
warn, note, quiet_run) using ANSI colors that the Actions UI renders.
2. e2e-go.yml + e2e-ddil.yml — tofu phases switch back to quiet redirect
into $TOFU_LOG (the previous tee'd version regressed live noise vs
the original silent redirect). Each phase now prints one colored
ok/✗ line; on failure the tail of $TOFU_LOG dumps inside a single
collapsed group, so the live log stays scannable but the failing tail
is one click away.
3. junit-report render.py — compact summary: short status icons (✅/❌)
in a single column, no separate err column, single-line failure list
(truncated to 120 chars) instead of <details> blocks that wrap badly
on narrow screens.
Per-suite test runs still wrap in ::group:: with an inline cyan banner
so pass output collapses and the suite name is obvious when expanded.
* test(e2e): add harness.Phase / Step / Detail for human-readable test output
Test fixtures were emitting flat walls of t.Logf with every line prefixed
by the same `lb_test.go:61:` (file:line of the call site that the
t.Helper() chain bubbles up to) and forced 6-space indent. Hard to skim,
hard to find where one phase ends and the next begins.
Add three helpers in tests/e2e/harness/log.go:
Phase(t, fmt, ...) — flush-left colored banner via fmt.Println.
Bypasses t.Logf so the line lands without the
testing framework's indent/file:line prefix.
Pure visual structure; the diagnostic detail
stays on t.Logf.
Step(t, fmt, ...) — single-line sub-phase marker via t.Logf.
Keeps file:line attribution so a triager can
find the source of a progress message.
Detail(t, k, v, ...) — key=value resource IDs via t.Logf. Same
attribution rationale as Step — IDs are
diagnostic and want to land in JUnit XML
bucketed with the owning test.
Why the split: Phase is purely a banner; losing JUnit attribution costs
nothing because banners aren't diagnostic. Step/Detail carry triage
context (instance IDs, AMI, etc.) and a failing test's JUnit testcase
node should still contain them, so t.Logf attribution is kept.
ANSI colors are auto-disabled when stdout isn't a TTY and GITHUB_ACTIONS
isn't set, so piped local `go test -v` stays clean.
Apply to lb_test setupSharedFixture — five Phase banners replace the
implicit run of helper logs ("Discovering cluster capacity",
"Ensuring SSH key pair", "Creating shared VPC topology",
"Launching app instances", "Launching probe client") so the live CI log
reads as a story rather than a flat resource dump.
* ci(e2e-go): strip indent + file:line on display, propagate color env over SSH
Two display bugs spotted on the previous run:
1. Phase banners came out white instead of bold-cyan because the test
binary runs over SSH on the tofu VM, where neither GITHUB_ACTIONS
nor a TTY is present, so harness.log.go init() disables ANSI escapes.
Fix: export GITHUB_ACTIONS=true and FORCE_COLOR=1 in the remote env
so the helper keeps emitting color codes.
2. Every t.Logf line still rendered as
lb_test.go:61: instance type: t3.nano
(4-space indent + `<file>:<line>:` prefix) because t.Helper()
bubbles file:line to the call site. Fix: pipe the test binary's
stdout through `sed -E 's/^[[:space:]]+([a-zA-Z0-9_]+_test\.go:[0-9]+: )?//'`
so the display strips both. Tee to the artifact log happens BEFORE
the sed so raw output is preserved for triage; only the live UI
sees the cleaned form.
* feat(e2e-harness): extend harness for single-node Go suite port
Stage A of mulga-siv-89 — add the primitives the single-node run-e2e.sh
port consumes:
- AWSClient gains IAM + STS service handles, plus NewAWSClientWithCreds
for per-tenant account-scoping in Phase 8.
- awserror.go: ErrorCodeIs, AssertAWSError, ExpectError — Go equivalent
of the bash expect_error helper used throughout the negative phases.
- poll.go: WaitForInstance/Volume/Snapshot/Image state to any target,
with per-resource default timeouts tuned from the bash sleep loops.
- spxcli.go: thin shellouts for spx get nodes/vms, spx top nodes,
spx admin account create with output parsing for tenant-id/access-key.
- rawhttp.go: signed raw POST against the AWS gateway for the Phase 8
InvalidAction probe (gateway rejects on auth before action parsing).
- ovn.go: OvnNbctl/OvnSbctl wrappers + SkipIfNoOVN for Phase 8b-e
datapath checks; WaitForPortGroupMember handles propagation polls.
- ec2helpers.go: InstancePublicSSHHost (public-IP-or-qemu-hostfwd),
LsblkRootGiB, serial-console-access trio, DiscoverDefaultVPC,
idempotent AuthorizeSSHIngress.
- account.go: AccountCarousel maps tenant name -> scoped AWSClient,
built atop NewAWSClientWithCreds for the Phase 8 isolation tests.
Pure groundwork — no new tests, no production behaviour change. The
cert + lb scenarios still compile against the extended harness.
* ci(e2e-go): auto-cancel + reap orphans to prevent runner wedge
A cancelled run on the single-runner ci-single host has been leaving
orphan tofu/terraform procs (and stale tfstate locks) behind, which
caused the next push's tofu destroy to hang for 45m+ and saturate the
runner host until sshd refused new connections.
- Add `concurrency: e2e-go-${ref}, cancel-in-progress: true` so a new
push to feat/e2e-go-harness cancels the in-flight run instead of
stacking on the same self-hosted runner.
- New `Reap Orphan Procs` step at job start: SIGTERM then SIGKILL any
lingering `tofu`/`terraform` from the runner user, and unlink any
stale `.terraform.tfstate.lock.info`.
- Harden `Teardown`: drop `set -e` (scrub-env must always run as the
libvirt-level fallback), reap orphans before destroy, and wrap
`tofu destroy` in `timeout 600` so a wedged provider can't pin the
job to its 45m timeout.
* ci(e2e-go): drop push trigger, manual dispatch only
Pull the on.push branch trigger so the workflow only fires from
workflow_dispatch — matches the e2e-ddil.yml Phase-1 pattern. Push
trigger lifts again once the single-node Go port (mulga-siv-89) is
green end-to-end and run-e2e.sh is retired.
* test(e2e-single): port run-e2e.sh phases 1-4 to Go
Stage B of mulga-siv-89. Lands the TestSingleNode orchestrator + Fixture
that threads state between sequential phase subtests, plus phases:
- Phase 1: KVM check, AWS gateway TLS reachability, daemon NATS
readiness polling, region/AZ smoke.
- Phase 1b: spx get nodes / top nodes / get vms (single-node only).
- Phase 2: nano instance-type + arch discovery.
- Phase 2b: serial-console-access default/enable/disable round-trips.
- Phase 3: create-key-pair + import-key-pair lifecycle; test-key-1 PEM
kept for Phase 5 instance launch (cleanup deferred to teardown phase
in stage G).
- Phase 4: architecture-aware AMI discovery via name filter
ami-ubuntu-24.04-{x86_64,arm64}, falls back from spx import output.
Phase ordering is contractual (Phase 5+ depend on AMI, key pair, AZ).
detectPoolMode reads [network] external_mode from spinifex.toml so
stages F/G can skip pool-only phases on dev_networking fixtures.
No production code changed. cert + lb scenarios continue to compile.
* test(e2e-single): port run-e2e.sh phases 5-5e to Go
Stage C of mulga-siv-89 — the instance/volume/snapshot/image lifecycle
that everything else hangs off:
- Phase 5: run-instances (default VPC + default SG with tcp/22 opened
via idempotent harness.AuthorizeSSHIngress), wait running, resolve
root volume from BlockDeviceMappings.
- Phase 5a-pre: spx get vms now contains the running instance.
- Phase 5a: describe-instances metadata round-trip (type/key/AMI/BDMs).
- Phase 5a-ii: TCP wait, ssh id, lsblk cross-check vs API root volume
size (±1 GiB tolerance — lsblk rounds down), soft hostname check.
- Phase 5a-iii: get-console-output round-trip on InstanceId.
- Phase 5b: create-volume (10 GiB) → modify-volume (20 GiB) →
attach-volume → detach-volume → delete-volume, polling each state
transition through harness.WaitForVolumeState.
- Phase 5b-ii: describe-volume-status on the root volume.
- Phase 5c: create-snapshot → wait completed → copy-snapshot → both
visible → delete original → copy survives → delete copy.
- Phase 5d: AMI snapshot-backed launch verification via
DescribeImages.BlockDeviceMappings[].Ebs.SnapshotId. Predastore-side
config.json reads are TODO (no S3 client in harness yet).
- Phase 5e: create-image --no-reboot, wait available, capture backing
snapshot ID for Phase 9 cleanup.
Phase 7a (attach to stopped → error) stubbed in volume_test.go for
Stage D to fill once the lifecycle stop/start lands.
* test(e2e-single): port run-e2e.sh phases 5f-8 to Go
Stage D of the single-node Go port (mulga-siv-89). Adds four files
under tests/e2e/single/ covering Phase 5f (SG egress ACL enforcement),
Phase 6 (tag CRUD), Phases 7 / 7a / 7b / 7c-pre / 7c (stop, start,
attach-to-stopped negative, ModifyInstanceAttribute, reboot, multi-count
RunInstances), and Phase 8 negatives (18 sub-tests asserting AWS error
codes via harness.ExpectError / AssertAWSError / PostAWSAction).
Wired into TestSingleNode in main_test.go; phase ordering preserved
because Phase 7 chain mutates the shared instance state (stopped at end
of 7, .small after 7b, running after 7c-pre, untouched by 7c siblings)
and Phase 8 negatives need a running instance with the AMI/key created
earlier.
Removes the placeholder phase7a_AttachToStoppedError stub from
volume_test.go (real impl now in lifecycle_test.go).
run-e2e.sh stays in tree until step-7 cleanup per the parent plan.
* ci(e2e-go): wire e2e-single target + add single to build set
Lets the in-progress single-node Go port (mulga-siv-89, Stages A-D
landed) be exercised in CI via explicit `suites: e2e-single` dispatch
input ahead of Stage G flipping the workflow default.
Workflow default suites unchanged until Phase 9 teardown lands.
* test(e2e-single): port run-e2e.sh IAM 1-7 + Phase 8 account scoping to Go
Stage E of the single-node Go port (mulga-siv-89). Adds two files
under tests/e2e/single/:
- iam_test.go (903 lines): IAM Phases 1-7 — User CRUD, Access Key
Lifecycle, User Authentication (via harness.NewAWSClientWithCreds),
Policy CRUD (+ CreatePolicyVersion / SetDefaultPolicyVersion /
DeletePolicyVersion which bash lacks), Policy Attachment &
Enforcement (allow / deny / wildcard / root bypass), Policy Lifecycle
(DeleteConflict while attached), and idempotent Cleanup.
- account_test.go (1186 lines): Phase 8 EC2 Account Scoping — 11 Steps
(Account Setup, Instance / Volume / KeyPair / Snapshot / VPC-Subnet /
IGW-EIGW Scoping, Account Settings, Global Resources, Edge Cases,
Cleanup). Uses harness.AccountCarousel for the multi-profile
credential map and SpxAdminAccountCreate for admin account
bootstrap.
Fixture extended with IAM cross-phase state (IAMAdminAccount,
IAM{Alice,Bob,Charlie}{KeyID,Secret}) so Phase 7 cleanup is defensive
even when an intermediate IAM phase short-circuits. All 11 Phase 8
Steps share local state in the outer function; t.Cleanup mirrors
Step 11 LIFO so a mid-Step failure still tears down accounts.
Wired into TestSingleNode. run-e2e.sh stays in tree until step-7
cleanup per parent plan.
* fix(e2e-harness): use kebab-case is-default filter for DescribeVpcs
AWS EC2 DescribeVpcs filter names are kebab-case (is-default), and the
daemon's filter allowlist enforces that. The harness sent the camelCase
SDK field name (isDefault), so the daemon returned InvalidParameterValue
400 and DiscoverDefaultVPC fataled — leaving Phase 5 InstanceID empty
and cascading 16 downstream Single-Node E2E subtests to fail.
* test(e2e-single): port run-e2e.sh phases 8b-8e to Go
Stage F of the single-node Go port (mulga-siv-89). Adds three files
under tests/e2e/single/:
- vpc_test.go (553 lines): Phase 8b (pool-mode VPC public/private
subnet E2E — CreateVpc, dual subnets with MapPublicIpOnLaunch
assertions, IGW attach, custom route table + 0.0.0.0/0 route,
instance launch + SSH + external connectivity probe) and Phase 8c
(route table validation — main RT association, local + IGW route
presence, custom RT CRUD + association/disassociation, negative
delete-local + delete-main assertions).
- natgw_test.go (467 lines): Phase 8d (pool-mode NAT GW E2E —
CreateNatGateway with EIP, private subnet route via NAT, bastion-
hopped SSH into private VM, baseline egress drop / post-NAT egress
succeed / post-teardown egress lost). Inline waitForNATGatewayState
helper bounds the pending->available->deleted state machine via
harness.EventuallyErr.
- datapath_test.go (326 lines): Phase 8e (OVN-gated SG-to-SG datapath
— two SGs with UserIdGroupPair ingress rule, OVN port-group
membership + SB address-set wait loops, allowed traffic curl,
denied traffic nc, revoke->drop, re-add->restore).
Pool-mode gating via fix.PoolMode for 8b/8d; OVN gating via
harness.SkipIfNoOVN for 8e. Per-phase t.Cleanup LIFO ensures
teardown unwinds even on partial failure. Wired into TestSingleNode.
* test(e2e-single): port run-e2e.sh phases 9, 9a, 9b to Go
Stage G of the single-node Go port (mulga-siv-89) — final teardown +
post-teardown verification. Adds tests/e2e/single/teardown_test.go
(226 lines):
- phase9_Teardown: DeleteSnapshot(CustomAMISnapID) -> DeregisterImage
(CustomAMIID) -> TerminateInstances(InstanceID) + wait terminated ->
DeleteKeyPair(KeyName). Each call swallows *NotFound via
harness.ErrorCodeIs; unexpected errors logged as warnings so 9a/9b
always run.
- phase9a_VerifyTeardown: DescribeInstances must show terminated or
NotFound; DescribeImages must NOT include the deregistered AMI;
DescribeKeyPairs must NOT include the deleted key. Clears the
consumed Fixture fields.
- phase9b_FinalClusterStats: harness.SpxGetVMs must NOT list the
terminated InstanceID; orphan i- rows surface as soft Logf warnings
to avoid flakes when parallel suites share the node.
Wired into TestSingleNode. With this, mulga-siv-89's single-node Go
port (Stages A-G) is feature-complete; run-e2e.sh remains in tree
until a separate cleanup bead deletes it after CI burn-in.
* ci(e2e-go): unbuffer sed in test pipeline for live log streaming
GNU sed defaults to block-buffered stdout when stdout is a pipe
(GitHub Actions runner). Accumulates 4-64KB before flushing, so
test output appeared in sporadic batches unaligned to test
boundaries. -u flag forces line-buffered output so each go test -v
line surfaces in the Actions UI as it is produced.
Side effect: none. No process count change, no SSH session change,
no test execution change. Pure output flushing on the runner host.
* fix(e2e-single): persist key PEM across phases and skip unimplemented IAM ops
Three bugs blocked the Single-Node Go E2E suite after the DescribeVpcs
filter fix:
1. Phase 3 wrote the SSH PEM into `t.TempDir()`, which Go cleans up when
the Phase 3 subtest exits. Phases 5a-ii / 5a-iii / 7b / 7c-pre then
saw "Permission denied (publickey)" / "Identity file not accessible"
and the cascade left the instance in a state that broke 7c-pre's
`start-instances`. Move the PEM under a TestSingleNode-scoped
`fix.TmpDir` so it survives until the whole test exits.
2. IAM Phase 2's `require.NotEmpty(t, fix.IAMAdminAccount, "")` was
intended as a no-op (Phase 4 populates the field), but require.NotEmpty
fails on empty regardless of message. Removed the bogus check.
3. The daemon does not yet implement `UpdateUser` (IAM Phase 1) or the
policy-version family (IAM Phase 4): `CreatePolicyVersion`,
`ListPolicyVersions`, `SetDefaultPolicyVersion`, `DeletePolicyVersion`.
They return `InvalidAction` and abort the phase. Wrap each block in a
t.Run sub-test with t.Skip so the surrounding phase still runs and
the skips show up explicitly in the test report.
* test(e2e): parallelise hot phases + tune fast-path polls
Squash merge of feat/e2e-parallel-quickwins (mulga-siv-96). Four
quick wins from decomposing run-e2e.sh into Go phase subtests:
- Phase 8 negatives (single/negative_test.go): t.Parallel() inside
each of the 18 read-only error-path sub-tests. ~5-10x speedup.
- IAM Phase 4 policies (single/iam_test.go): EC2ReadOnly stays
seeded sequentially (populates fix.IAMAdminAccount); the other
four policies fan out as siblings under a wrapping
create_policies_parallel t.Run. ~5x on the Phase 4 sub-step.
- Volume + snapshot fast paths (single/{volume,snapshot}_test.go):
pass harness.WithPoll(500ms) on the five state transitions that
finish in <1s on local QEMU. Halves Phase 5b / 5c wall-clock.
- Cert per-IP loop (cert/cert_test.go): t.Parallel() inside the 4
inner t.Run(ip, ...) blocks. Cuts cert phase by len(nodes).
No harness changes, no Fixture changes, no test-execution-order
changes. mulga-siv-96.
* test(e2e-lb): resolve peer availability before shared fixture setup
setupSharedFixture builds a VPC + 2 app VMs + probe client (minutes
on capacity-tight dev hosts) and previously ran BEFORE the peer
pickup + ssh.Ping. On single-node, the InternetFacing_* subtests
would correctly t.Skip on peer == "" — but only after the fixture
work and once subtests started, so the wait appeared to be attached
to the first subtest name gotestsum printed.
Reorder: pickPeer + ssh.Ping first, log "internet-facing will skip"
immediately, then build the fixture for the internal subtests.
No behavior change for multi-node + peer-reachable; on single-node
the skip rationale surfaces before the fixture wait.
* test(e2e-single): extend SSH wait budget to 3m on slow boot paths
CI run 26034322018 timed out Phase5a_ii_SSH (60s budget) and
Phase8b_VPCSubnetE2E (2m budget) on the TCP-port-open poll while
sshd was still finishing pam/cloud-init. Bump all four wait sites
to 3m as a stop-gap:
- single/instance_test.go phase5aii_SSHProbe
- single/lifecycle_test.go waitForSSHReady (Phase 7b/7c/7c-pre)
- single/vpc_test.go phase8b_VPCSubnetE2E
- single/natgw_test.go phase8d bastion SSH wait
Proper fix tracked under mulga-siv-101 (hoist a harness.WaitForSSH
that probes the actual handshake, not just tcp/22 reachability).
* test(e2e-single): skip-gate IAM3/IAM5/IAM6 until daemon handlers land
CI run 26034322018 surfaced three IAM daemon gaps:
- IAM3_UserAuthentication: alice's freshly-created access key returns
403 from DescribeInstances — daemon doesn't honour scoped IAM key
signatures yet.
- IAM5_PolicyAttachmentEnforcement: cascades from IAM3 (alice can't
sign).
- IAM6_PolicyLifecycle: DetachUserPolicy returns 404 even on
attachments Phase 5 confirmed — daemon attachment ledger gap.
Skip-gate each phase with t.Skip + a pointer to mulga-siv-100 so the
remaining IAM coverage (IAM1/IAM2/IAM4/IAM7) keeps surfacing
regressions, and the suite as a whole doesn't fail on known gaps.
Flip to real assertions once the daemon handlers land.
* test(e2e-single): probe full SSH handshake (not just TCP port open)
CI run 26036025293 hit "Connection timed out during banner exchange"
on Phase5a-ii / 8b / 8d even with the 3m TCP-port-open budget: tcp/22
opens immediately, but sshd is still finishing pam/cloud-init, so the
first real runSSH call afterwards races the half-open daemon.
Switch waitForSSHReady to issue an actual ssh BatchMode + ConnectTimeout
handshake against the target, retrying until the daemon completes the
banner exchange. Drop the four TCP-only Eventually loops in favour of
the upgraded helper:
- instance_test.go phase5aii_SSHProbe
- lifecycle_test.go waitForSSHReady (Phase 7b / 7c-pre / 7c)
- vpc_test.go phase8b_VPCSubnetE2E
- natgw_test.go phase8d_NATGateway (bastion)
Signature: waitForSSHReady(t, host, port, keyPath). Backwards-compat
alias waitForSSHHandshake exposed for the instance_test caller. Proper
harness hoist tracked under mulga-siv-101.
* test(e2e-harness): dual-emit Step + Detail for live CI streaming
go test's testing framework buffers t.Logf output per-test and releases
it only on PASS/FAIL. Long subtests (Phase8Acct_AccountScoping ~115s,
Internal_NLB ~60s, Phase8b_VPCSubnetE2E 2-3m, Phase8d_NATGateway ~90s)
therefore went silent in CI for the entire subtest duration, even with
sed -u line-buffering in the workflow pipeline.
harness.Phase already wrote to os.Stdout directly for this reason.
Extend the pattern: have Step and Detail dual-emit — write the same
line to os.Stdout (streams live) AND t.Logf (keeps JUnit per-test
attribution). The duplicate on a failure is acceptable; both copies
carry identical content.
mulga-siv-103 (note: numbering skipped past siv-102 which was already
filed in the parent branch).
* test(e2e-harness): drop t.Logf duplicate from Step + Detail
The dual-emit (Fprintln + t.Logf) caused every Step/Detail line to
appear twice after long subtests: once live via stdout, once again
when the testing framework released its per-test buffer at
PASS/FAIL. Most visible after lb subtests (Internal_NLB ~60s) where
the bulk release dumped ~dozens of duplicated lines at once.
Drop the t.Logf copy. go-junit-report parses stdout between
`=== RUN` and `--- PASS/FAIL` markers, so per-test attribution in
JUnit XML is preserved without the duplicate.
Refs: mulga-siv-103
* test(e2e-harness): stream lb-waiter progress live in CI
WaitForLBActive, WaitForTargetsHealthy, WaitForENICleanup, and
WaitForInstanceRunning emitted progress via t.Logf, which the
testing framework buffers per-test. After the previous commit
dropped the dual-emit, that meant every poll loop went silent
until subtest end — visible in CI as 'nlb is active' hanging on
screen for the whole duration of the subsequent traffic check.
Route progress through harness.Step (direct stdout). Also emit a
'waiting for X' Step at the start of each helper so observers
know what the silent stretches actually represent.
Refs: mulga-siv-103
* test(e2e): dump VPC/IGW datapath diagnostics on Phase8b SSH timeout
Phase8b's 3min SSH timeout on a fresh-VPC VM (CI run 26037892507) is
the customer-visible surface of mulga-siv-105 — vpcd's handleIGWAttach
returns before ovn-northd compiles + the gateway chassis installs
flows. Two other cleanup-only bugs (siv-106 missing spinifex:cidr,
siv-107 dnat_and_snat double-delete) showed up in the same triage.
Keep the test hard-failing so the regression stays visible, but dump a
triage bundle on timeout so each occurrence is actionable:
- guest console output (last 4KB — boot + cloud-init state)
- ovn-nbctl show + ovn-sbctl show
- Logical_Router external_ids (confirms siv-106 reproduction)
- NAT rules (confirms siv-105 + siv-107 surface)
- Port_Binding chassis,up (confirms gateway port up state)
Diagnostics go straight to stdout (Step/Detail rationale) so they
stream live in CI rather than dumping at PASS/FAIL.
Refs: mulga-siv-105, mulga-siv-106, mulga-siv-107
* ci(junit-report): drop parent t.Run containers from tally + list skips with reasons
GitHub Actions test summary was counting Go's top-level Test* parent
plus its failing subtest as two distinct failures (the parent is just
a rollup of its children). The summary now de-dupes by dropping any
test case whose name is a strict prefix of another's, so the per-file
counts and the Failures block both match the actual leaf-test
outcome. CI run 26037892507 was reporting '2 failed' for single when
it should have been 1.
Also adds a collapsible Skipped section listing each skipped leaf test
with its t.Skipf call-site reason (the .go:<line>: line from the
CDATA). ANSI escapes from harness.Phase banners are stripped so the
reason is plain text. Reasons are useful triage signal — current run
has 9 skips spread across daemon gaps (mulga-siv-100) and pool-mode
gates (InternetFacing_*).
Refs: mulga-siv-89
* ci(e2e-go): propagate cancel to remote .test procs + nuke VM before destroy
Two related leaks made cancelled runs strand QEMU work on the libvirt host:
1. The long `ssh tf-user@VM "for SUITE in …; do ./$SUITE.test"` ran
without -tt, so when the runner cancelled the step the local ssh
died but sshd never sent SIGHUP through (no PTY). The remote
`.test` binary orphaned and kept running until its own 30m
`-test.timeout`, holding tmp dirs, NATS connections, and qcow2 file
handles.
2. Teardown went straight to `tofu destroy` without first killing any
stragglers on the VM, so destroy raced the .test's open file handles
on the root disk — sometimes successfully, sometimes leaving the
libvirt host with a half-released qcow2.
Fix:
- Allocate a PTY on the run-suites ssh (`-tt`) so sshd HUPs children
when the local ssh dies.
- Add a trap (EXIT INT TERM) in the run-suites step that ssh's back
to the VM and pkill's `/spinifex-e2e-bin/*.test` belt-and-braces.
- Mirror the same pkill at the top of Teardown so destroy runs against
a quiesced VM.
Both cleanups are scoped to the per-run wan_ip — safe to land while
multiple ci-single runner agents run concurrent jobs against different
tofu envs on the same host (we deliberately keep that parallelism).
Refs: runner host wedged 2026-05-19 (post-cancel orphans suspected;
no journal access yet to confirm).
* ci(e2e-go): scope orphan reap to GITHUB_WORKSPACE so it spares sibling runners
Reap Orphan Procs (job start) and the in-Teardown pkill block were using
`pkill -u $UID_SELF -x tofu/terraform` plus `find $HOME -maxdepth 6 -name
.terraform.tfstate.lock.info`. The single host runs 5+ self-hosted runners
all as `tf-user`, so every e2e-go run was SIGKILLing in-flight tofu from
sibling workflows (e2e.yml, e2e-ddil.yml, e2e-baremetal.yml, ...) and
deleting their state-lock files — exactly the kind of cross-runner
collateral the reap was meant to recover from.
Scope by `/proc/$pid/cwd` starting with $GITHUB_WORKSPACE; each runner's
workspace dir is unique on the host, so only this run's own tofu procs
match. Find for stale lockfiles is likewise scoped to $GITHUB_WORKSPACE.
* ci(e2e-go): bump setup-go v5->v6, upload-artifact v4->v7
GitHub now warns Node 20 actions are deprecated. e2e-go.yml lagged the
rest of the repo; bump to match versions already in use:
- actions/setup-go@v5 -> @v6 (matches spinifex.yml)
- actions/upload-artifact@v4 -> @v7 (matches release.yml, e2e-ddil.yml)
checkout@v6 and create-github-app-token@v3 are already current across
all workflows. The local junit-report action is `using: composite`
(shell-only), so the Node runtime change does not apply.
* fix(vpcd): add flows-ready barrier after IGW attach (mulga-siv-105)
handleIGWAttach wrote the external switch + gateway port + LRP + default
route to OVN NB and returned immediately, before ovn-northd had compiled
NB -> SB and before ovn-controller on the gateway chassis had installed
the resulting flows. A subsequent RunInstances -> vpc.add-nat could
complete while the datapath was still dark; the launched VM was then
unreachable on its public IP for whatever flow-install latency the
chassis happened to incur. Customer-visible as 'I just created a VPC,
launched a VM, and can't SSH in' for ~minutes.
Reproduced deterministically in CI run 26037892507 Phase8b: a VM in
a fresh VPC was unreachable at 192.168.0.202:22 for 3+ minutes, while
a VM at the same public IP in the warm default VPC (Phase8d) was
reachable in ~40 seconds.
Block at the end of handleIGWAttach on `ovn-nbctl --wait=hv sync`,
which bumps NB_Global.nb_cfg and waits for every connected chassis to
acknowledge the new sequence number — i.e. flows installed. Bounded by
--timeout=30; overruns log a WARN and continue (a 30s OVN stall is
already a deeper problem than failing VPC create would surface).
waitForFlowsHV is a package var so tests can stub it; in environments
without ovn-nbctl on PATH the shell-out fails fast and the WARN path
returns nil, so existing IGW tests stay green without a live OVN.
Refs: mulga-siv-105
* fix(vpcd): store spinifex:cidr on VPC create (mulga-siv-106)
handleVPCCreate built the OVN logical router with only spinifex:vpc_id
and spinifex:vni in ExternalIDs. Cleanup paths (handleIGWDetach + NAT
sweeps) read external_ids['spinifex:cidr'] to scope SNAT removal to
the VPC's own CIDR; when unset, they fell back to an overbroad
10.0.0.0/8 and emitted a WARN.
reconcileVPC already stored the same key at startup; the live-create
path drifted. Add the field to handleVPCCreate, log the cidr alongside
vpc_id, extend TestTopologyHandler_VPCCreate to assert the external_id
is set.
Refs: mulga-siv-106
* fix(vpcd): make handleDeleteNAT idempotent on 'already absent' (mulga-siv-107)
Instance termination fans out through multiple cleanup paths
(instanceCleanerAdapter.ReleasePublicIP AND
VPCServiceImpl.DeleteNetworkInterface), both of which publish
vpc.delete-nat for the same (vpc, logical_ip). The publish is
fire-and-forget (utils.PublishNATEvent uses PublishEvent for
vpc.delete-nat, not RequestEvent), so callers never branch on the
response. The second publisher then triggered a spurious
'ERROR vpcd: failed to delete dnat_and_snat rule ... not found' log
line ms after the first delete succeeded — confusing triage signal
with no actionable consequence.
Add ErrNATNotFound sentinel to the OVN client interface and wrap the
not-found return paths in both LiveOVNClient and MockOVNClient.
handleDeleteNAT matches errors.Is(err, ErrNATNotFound) and treats
that as success (logs INFO 'already absent (idempotent)').
Existing TestTopologyHandler_DeleteNAT_NotFound asserted the opposite
contract; the comment claimed EIP disassociation needed the error
signal, but DisassociateAddress also fire-and-forgets vpc.delete-nat,
so the contract never had a real consumer. Test renamed to
_Idempotent with assertSuccess.
Other failure modes (router missing, OVN unreachable, transact error)
still surface as ERROR + reply with the error string.
Refs: mulga-siv-107
* ci(e2e-go): cluster JUnit failures + name likely root cause (#230)
* ci(e2e-go): cluster JUnit failures + name likely root cause
New composite action `.github/actions/e2e-analyze` runs after
`go-junit-report` converts each suite log. For every `<failure>` it
strips ANSI, normalises dynamic noise (EC2 IDs, UUIDs, IPs, timestamps,
file:line) to a stable signature, picks the earliest non-cascade
failure per suite as the likely root cause, and buckets the rest by
signature. Output is appended to `$GITHUB_STEP_SUMMARY` and written to
`<log-dir>/analysis.md` so it travels with the artifact bundle.
Cascade markers (`must populate fix.`, `Should NOT be empty`,
`Expected value not to be nil`) collapse the typical "one upstream
phase fails, ten downstream `require.NotEmpty` assertions trip" pattern
into a single grouped entry under the real first failure.
The analyser is advisory — it always exits 0. The existing
"Fail job if any suite failed" gate keeps owning exit-code semantics.
Stage 1 of `docs/development/improvements/e2e-go-failure-analysis.md`
(mulga-siv-102). Stage 2 (per-failure log slicing) and Stage 3
(rule-based hints via `tests/e2e/.failure-rules.yaml`, placeholder
seeded here) are independent follow-ups.
CI wiring:
- e2e-go.yml: new "Analyze e2e failures" step between "Publish test
summary" and the artifact upload, always-runs.
- spinifex.yml: new `make test-actions` step so the golden-file tests
under `.github/actions/e2e-analyze/testdata/` run on every PR.
- Makefile: `test-actions` target; kept out of `test-cover` so CI-only
tooling doesn't dilute coverage %.
Golden fixtures: a synthetic cascade-vpcs case (one Phase 5
InvalidParameterValue root + 15 downstream cascades), one real
single-failure case captured from run 26037892507, and a clean
no-failures case.
* ci(e2e-go): per-failure log bundles with time-window slicing
Stage 2 of the e2e failure analyzer. For each failure surfaced by
Stage 1, materialise <log-dir>/analysis/NN-<TestName>/ containing:
failure.txt — summary (test, start, duration, file-site, error)
journal.log — spinifex-journal.log sliced to
[StartAt - 5s, StartAt + Duration + 5s]
test.log — test-<suite>.log block between `=== RUN <name>`
and the matching `--- FAIL` marker
<copies> — any files the harness already dropped at
<log-dir>/<TestName_with_/_replaced>/
Report links each entry to its bundle so a reader on the Actions
page goes straight to the relevant slice.
Workflow now invokes journalctl with --output=short-iso so the
analyzer can parse wall-clock timestamps for the journal window.
Lines without a parseable timestamp inherit the previous line's
classification (keeps multi-line records and stack traces
contiguous).
Render output is unchanged when BundlePath is empty, so the Stage 1
golden snapshots still match.
* ci(e2e-go): restore GOTOOLCHAIN=auto after setup-go v6 bump
setup-go@v6 flipped the GOTOOLCHAIN default from "auto" to "local",
which makes Go refuse to auto-download the toolchain version named
in go.mod. The self-hosted ci-single runner ships /usr/local/go
older than spinifex/go.mod's `go 1.26.3`, and build-install-artifacts.sh
prepends that path so the system Go wins the resolution race. Under
v5 ("auto"), Go silently fetched 1.26.3 on demand; under v6
("local"), the Build Install Artifacts step errors out:
go: spinifex/go.mod requires go >= 1.26.3 (running go 1.26.1; GOTOOLCHAIN=local)
Re-set the env to "auto" so behaviour matches pre-v6 runs.
* ci(e2e-go): re-export GOTOOLCHAIN=auto after setup-go
Workflow-level env doesn't help: setup-go@v6 writes GOTOOLCHAIN=local
to $GITHUB_ENV, which overrides workflow env in every later step.
Add a dedicated step right after setup-go that appends
GOTOOLCHAIN=auto to $GITHUB_ENV so the Build Install Artifacts step
(which uses /usr/local/go from a stale runner path) can self-heal by
fetching the toolchain named in go.mod, matching pre-v6 behaviour.
* fix(vpcd): add flows-ready barrier after dnat_and_snat add
handleAddNAT wrote the NAT rule to OVN NB and returned immediately,
mirroring the gap siv-105 closed for handleIGWAttach but on the NAT
add path. ec2d/RunInstances then returned success while ovn-northd
was still compiling NB->SB and ovn-controller hadn't installed the
DNAT/SNAT flows on the gateway chassis, so the freshly launched VM
was unreachable on its public IP for whatever flow-install latency
the chassis happened to incur.
Reproduced in CI run 26072432957 Phase8b_VPCSubnetE2E: VM at
192.168.0.212 timed out at 3min while diagnostics showed
Port_Binding up=true for both the VM eni and the chassis-redirect
gateway. SB-side convergence was complete; the missing piece was the
same `ovn-nbctl --wait=hv sync` barrier siv-105 added to IGW attach,
applied at the end of handleAddNAT as well.
Reuses the existing package-var `waitForFlowsHV` so tests can stub
it; no new infra. Parallel unit test asserts the call site fires
exactly once per add-nat.
* ci(e2e-analyze): real-artifact fixes for journal slicing
Three bugs surfaced after Stage 2 ran against real CI artifacts in
run 26072432957:
1. Regex `[+-]\d{4}` rejected the colon-offset form (e.g. `+10:00`)
that systemd's `journalctl --output=short-iso` actually emits on
most versions. Added a parser that tries RFC3339 first and falls
back to the no-colon `-0700` layout. Result: 0-line journal slices
become populated.
2. go-junit-report's `timestamp` attr on <testsuite> records the
moment the XML was produced (post-suite), not when the tests
started. Computing StartAt as `that + cumulative-priors` placed
every failure AFTER the journal collection ended, so windows
always missed. Workflow now writes `${ARTIFACT_DIR}/test-<suite>.start`
right before running each suite; analyzer prefers that file over
the junit timestamp.
3. Persisted `OffsetFromSuiteStart` on each Failure so the
suite-start override can recompute StartAt without re-parsing the
XML.
Unit tests added for the colon-offset journal format. End-to-end
test (TestWriteBundles_EndToEnd) still passes with the new layout.
* ci(e2e-analyze): skip parent testcases when summing suite offsets
go-junit-report emits one <testcase> for the parent Go test AND each
subtest, with the parent's time = sum of its children. ParseFile was
summing every testcase into the suite-cumulative-offset counter, so
every leaf's offset was inflated by ~the parent's total duration.
Visible on run 26073817490 as Phase8b's StartAt landing 13 minutes
after the suite finished collecting logs — beyond the journal window,
so the per-failure journal slice was empty.
Pre-compute the leaf set per suite (a name is a leaf iff no other
testcase name starts with `<name>/`) and only accumulate cumul on
leaves. Golden snapshots updated; the offset for the only failure in
each fixture now matches the actual leaf-sum start time.
* test(e2e-harness): capture IP-targeted datapath state on Phase8b SSH fail
Phase 1 diagnostics for mulga-siv-111. The Phase8b SSH timeout
reproduced on the e2e-failure-analysis branch with siv-105's IGW
barrier AND the new add-nat barrier BOTH firing cleanly, so the
residual gap is downstream of `--wait=hv sync` — most likely stale
OVS conntrack, stale upstream-host ARP, or an OF flow-install miss.
DumpVPCFlowDiagnostics now takes a VPCDiagnosticsOpts carrying the
external IP, logical IP, and per-test artifact dir. When set, the
helper greps `ovs-ofctl dump-flows br-int`, `conntrack -L`, and
`ip -4 neigh show` for the external IP / logical IP and snapshots
`ovn-nbctl find NAT external_ip=…`. Each capture is both printed
inline (existing affordance) and written to a separate file under
fix.Artifacts so the Stage 2 analyzer bundler picks it up alongside
the journal + test-log slices, no analyzer changes needed.
Phase8b's caller now passes pubIP / privIP / fix.Artifacts so the
captures fire on the next failure; updates the t.Fatalf message to
point at siv-111 instead of siv-105 (which is the now-closed parent).
* fix(e2e-single): authorize SSH ingress on fresh-VPC default SG in Phase8b
Phase 8b stands up a non-default VPC and runs an instance there. Its
auto-created default SG denies all ingress, so the SSH probe times out
even when every datapath barrier converges — OF flow captures show the
SYN reaches OVN, gets DNAT'd at table 13, then drops at the ACL between
tables 13 and 17. The bash driver relies on admin init having pre-baked
this rule on the *default* VPC's default SG; a fresh VPC has not.
Add a DescribeSecurityGroups + AuthorizeSSHIngress step between
route-table setup and run-instances, using the existing harness helper.
Fix surfaced via mulga-siv-111's Phase 1 diagnostics (OF flow + ACL
drop counts), invalidating the H1/H2/H3 stale-state hypotheses in the
bead plan doc.
* test(e2e): dual-detect ubuntu image version (24.04/26.04) during gold-image transition
After mulga gold image bumped to v6-fastboot (stages ubuntu-26.04 / resolute
instead of ubuntu-24.04 / noble), all consumers that hardcoded 24.04 break on
the new image. Make them detect at runtime so v3 and v6 envs both pass.
- tests/e2e/run-e2e.sh: DescribeImages filter accepts both
ami-ubuntu-{26,24}.04-<arch>, then derives IMAGE_NAME from the match.
- tests/e2e/run-pseudo-multinode-e2e.sh: prefer ~/images/ubuntu-26.04.img,
fall back to ubuntu-24.04.img; pass detected version to spx import.
- tests/e2e/single/image_test.go: walk candidate catalog names (26.04 first,
then 24.04), stop on the first one DescribeImages can resolve.
- .github/workflows/e2e-baremetal.yml: download resolute (26.04) into
BM_ISO_CACHE; update BM_UBUNTU_IMAGE env var path.
- docs/terraform-workbooks/{bastion-private-subnet,s3-webapp,nginx-webserver}:
AMI filter matches `*ubuntu-26.04*` OR `*ubuntu-24.04*` (AWS values=
array is ORed).
Companion changes for mulga (bootstrap scripts, baremetal, iso pipeline)
land in scripts/tofu-cluster/* and scripts/{tofu-iso,baremetal,iso-builder}/*
under bead mulga-siv-114. Drop the 24.04 fallbacks once all envs are on the
v6 gold image and 24.04 entries are removed from spinifex/utils/images.go.
* feat(e2e): add service-interfaces.yaml manifest + validator
Source of truth for which spinifex services produce/consume which NATS
subjects, and which e2e suites cover which services. Consumed downstream
by the targeted suite selector (Bead 4) to derive subset E2E runs from a
PR diff so single-service changes stop paying the full 25 min suite cost.
- docs/service-interfaces.yaml: 7 services, 4 active suites (cert, lb,
single, ddil). Subscribes / publishes / depends_on filled from grep
of NATS subjects in source. spinifexui marked covers_no_suite so
UI-only diffs skip e2e entirely. Future suites (multinode, reboot,
tofu, baremetal) commented in until Go ports land.
- tests/e2e/manifest-check: schema + cross-reference validator (path
existence, subject regex, duplicate detection, suite covers resolves
to a real service, fixtures references resolve). 8 unit tests cover
the failure modes plus a load-and-validate on the real manifest.
- Makefile: manifest-check target, hooked into preflight.
- docs/DESIGN.md: link to the manifest under "NATS Messaging".
mulga-siv-116. See docs/development/improvements/e2e-targeted-suite-selection.md.
* fix(e2e): drop catalog-download import path from phase4_Image
`spx admin images import --name ubuntu-26.04-x86_64` with wantErr=true
was meant to detect that bootstrap-install.sh already imported the AMI
and short-circuit on the duplicate exit code. After the v6 gold-image
bump preloaded `~/images/ubuntu-26.04.img` and bootstrap-install.sh
switched to `--file` for the import, two things broke at once:
- The catalog `--name` path no longer hits a duplicate guard for the
--file-imported AMI, so the import re-downloads ~857MB and either
succeeds (failing the wantErr=true assertion) or wedges the job
timeout while the catalog server crawls along at 16KB/s.
- `--file` from the test won't work either: the test binary runs as
`tf-user` over SSH, while bootstrap-install.sh placed the image at
`/home/spinifex/images/...` (mode 0700 home dir).
bootstrap-install.sh is already responsible for staging the AMI. The
test's job is verifying DescribeImages round-trips by-name and by-ID —
not re-exercising import. Trust the bootstrap-staged AMI and stop
calling import.
Keeps the 26.04→24.04 dual-detect for the v3 gold image transition;
drop the 24.04 candidate when no envs remain on v3.
Refs mulga-siv-115 (caught by the EC2 cold-boot fast-path E2E run on
feat/ec2-coldboot-fastpath).
* ci(e2e-go): default to e2e-single + harden status-report SHA fallback
Two changes to .github/workflows/e2e-go.yml:
1. Default `suites` input now includes e2e-single so a no-input
manual dispatch exercises the full single-node ladder. Single-node
Go harness is greenable now (image_test fix at
|
||
|
Julian Sommer
|
c5e65cae38 | chore: bump golangci-lint | ||
|
joshsiv-mulga
|
dcf74b84e0 |
refactor: strip legacy lb-alpine AMI build path post-microvm-merge
ELBv2 LB instances now boot direct via microvm kernel+initramfs (the lb-alpine-3.21.6 system AMI is no longer used). Remove the build/import scaffolding: - delete scripts/images/lb.conf + lb-setup.sh (system-image bake config) - remove lb-alpine catalog entry from spinifex/utils/images.go - drop LB_IMG download + BM_LB_ALPINE_IMAGE env from e2e-baremetal.yml Tracks mulga-siv-81. |
||
|
joshsiv-mulga
|
f778508838 |
test(e2e): dual-detect ubuntu image version (24.04/26.04) during gold-image transition
After mulga gold image bumped to v6-fastboot (stages ubuntu-26.04 / resolute
instead of ubuntu-24.04 / noble), all consumers that hardcoded 24.04 break on
the new image. Make them detect at runtime so v3 and v6 envs both work.
- tests/e2e/run-e2e.sh: DescribeImages filter accepts both
ami-ubuntu-{26,24}.04-<arch>, then derives IMAGE_NAME from the match.
- tests/e2e/run-pseudo-multinode-e2e.sh: prefer ~/images/ubuntu-26.04.img,
fall back to ubuntu-24.04.img; pass detected version to spx import.
- .github/workflows/e2e-baremetal.yml: download resolute (26.04) into
BM_ISO_CACHE; update BM_UBUNTU_IMAGE env var path.
- docs/terraform-workbooks/{bastion-private-subnet,s3-webapp,nginx-webserver}:
AMI filter matches `*ubuntu-26.04*` OR `*ubuntu-24.04*` (AWS values=
array is ORed).
Companion mulga changes (bootstrap-install.sh, bootstrap.sh, tofu-iso/*,
baremetal/*, iso-builder/spx-test-gpu.sh) land under bead mulga-siv-114.
Drop the 24.04 fallbacks once all envs are on the v6 gold image and 24.04
entries are removed from spinifex/utils/images.go.
The companion image_test.go fix (walk catalog name candidates) lives on
feat/e2e-go-harness — that test file doesn't exist on dev yet.
|
||
|
tomnewton-mulga
|
e8ca596083 | fix: secret for CF URL endpoint |