mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-23 12:47:48 +00:00
32f2d2f7f6acad115bc2f3dd67449a3496d7d3fe
54 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ben Duncan
|
ae2a1830ef | Merge remote-tracking branch 'origin/dev' into account-quota | ||
|
Ben Duncan
|
f41f5530a0 | test: add an e2e suite proving quotas gate every capped resource | ||
|
Julian Sommer
|
17cea6cd4b |
fix: gate the SG datapath probe on the target's HTTP listener
TestSGPolicyDatapath/AllowedTraffic waited 60s for curl to reach the target's HTTP server but nothing ever waited for that server to start. Its cloud-init runs later than the client's sshd, which is what the preceding stage actually gates on, so the budget was measured from the wrong baseline and the gap between the two is unbounded on a loaded node. The failures reported curl exit 7, a refused connection: a missing SG allow is a drop ACL here, which would time out as exit 28. The target guest now reports its listener on the serial console, the only channel back to a guest whose SG has no SSH ingress, and a new TargetHTTPReady stage waits for that marker before AllowedTraffic runs at all. AllowedTraffic keeps its 60s budget, which now only has to cover chassis flow install, and dumps VPC flow diagnostics when it does fail so a genuine propagation failure is attributable from CI artifacts. |
||
|
Julian Sommer
|
bdc79108e9 | fix: make the DB endpoint the only path to the engine (#830) | ||
|
Julian Sommer
|
eac0f175ba | feat: require TLS on RDS connections by default, on both engines (#790) | ||
|
Julian Sommer
|
65d2501e6b | feat: add MariaDB as the second RDS engine (#762) | ||
|
Julian Sommer
|
1c4d41bffc | fix: reach the DB endpoint from any subnet of the VPC (#738) | ||
|
Julian Sommer
|
2e09461080 | chore: cleanup code comments | ||
|
Julian Sommer
|
5e17169661 | feat(e2e): complete the RDS end-to-end suite (#608) | ||
|
Julian Sommer
|
d4d9db9e0b | feat: add DB subnet groups and DB parameter groups (#600) | ||
|
Julian Sommer
|
2569601e3d | feat: implement RDS CreateDBInstance, reconciler and endpoint DNS (#594) | ||
|
Julian Sommer
|
5b8f20b89f | test: assert ModifyVolume resize reaches the guest block device (#585) | ||
|
Julian Sommer
|
95973eeb3c | refactor: migrate spinifex off legacy nats.JetStreamContext onto nats.go/jetstream (#584) | ||
|
Josh Siviour
|
344a490a70 |
fix(vm): give relaunched data volumes named block nodes so detach can complete (#575)
buildDrives emitted every non-boot data volume as a bare -drive with no id= and no node-name=, so a stop/start (or reboot/resize) relaunch left the volume anonymous: device_del/blockdev-del had nothing to address, QEMU kept the NBD socket open, and DetachVolume stalled through nbdkit's full kill grace before giving up. Add -blockdev support to the QEMU config builder and use it for non-boot, non-EFI volumes, sharing the node-name/device-id/iothread-id naming and virtio-blk-pci device arguments with AttachVolume's hot-plug path so cold-boot and hot-attach can no longer drift apart. A data volume with no persisted HotplugPort now gets one allocated and written back during buildDrives instead of landing on an unplugged bus. Also raise unmountSealTimeout past viperblockd's kill grace (it runs the seal after the SIGKILL, so matching the grace meant an unmount that used the whole grace could never be observed as successful), and bound the e2e harness's forced teardown detach by the teardown deadline so a slow detach is reported as slow rather than as an unexplained leak. |
||
|
Josh Siviour
|
cae76ba1b6 |
test: complete the e2e live-vs-mock rebalance (epic mulga-8oyg3) (#566)
* test(volume): assert chunk GC stays wired on in CreateVolume GCEnabled was zero-valued at every viperblock construction site for a long time and no test noticed. It is not part of viperblock.VBState, so it never round-trips through a saved config.json and cannot be observed by reading volume state back. Extract the viperblock.VB assembly out of CreateVolume into buildVBConfig so the GC wiring is assertable directly against the returned config, without a live viperblock or S3 backend. The config is returned by pointer because viperblock.VB carries atomic.Uint64 fields that vet's copylocks check rightly refuses to see copied. * test(e2e): snapshot backend byte accounting before volume purge DeleteVolume purges a volume's entire backend prefix, including any chunks a leak left behind, before anything measures it. That is the same masking that hid the storage-growth leak in production: a passing E2E cannot fail on backend growth when the evidence is deleted first. Snapshot the volume's backend chunk footprint in EnsureVolume's cleanup closure, immediately before DeleteVolume, so every volume the shared teardown path purges is measured rather than silently discarded. The snapshot is always taken and logged; the hard ratio check additionally runs for callers that registered a guest-written-bytes baseline, since most callers never attach or write to the volume they create and so have no baseline to compare against. The tolerance is the RS(2,1) erasure floor widened for per-chunk header and tail-chunk overhead. It is sized to distinguish unbounded growth from a footprint settling at the floor, not to catch bounded residual garbage. The check is non-fatal inside the cleanup callback: t.Fatalf's runtime.Goexit would abort the DeleteVolume call queued behind it and turn a reported leak into a real one. * test(e2e): add memory-constrained concurrent-write durability regression The existing durability tests write one 4MiB sentinel, sequentially, on a comfortably sized guest, which is the exact inverse of the known-open data-loss bug: acked writes read back zero-filled after a cold reread when a guest is memory-starved during concurrent writeback. No happy-path test can reach it, because the fault lives in the intersection of memory pressure, write concurrency and cache-cold reread. Add a suite that encodes those three conditions together: a guest discovered at or below the working set, N parallel large writers launched as background jobs in a single command so they genuinely overlap, swap disabled, then sync and drop_caches before rereading. Assertions are per stream rather than aggregate so a failure names the losing writer instead of leaving whoever reads it to re-derive which of N writers lost data from one combined digest. GuestExec gains a timeout-parameterised variant. Its fixed two-minute default is sized for sub-second payloads, and a multi-gigabyte write to a network-backed volume would exceed it, so the suite would have failed by timeout while looking like it had caught the corruption. The budget scales with the working set, and a deadline is reported distinctly from a data mismatch so the two red states are never confused. The suite is dispatchable but deliberately absent from the default SUITES: the bug it reproduces is still open, so it is expected to fail and must not sit in a merge-gating path. It is registered in the workflow allow-list so it stays discoverable rather than being buried behind a skip. Also record on the live IAM instance-profile test why its assertions were not moved down to the integration tier, so the trace is not repeated. * test(e2e): drop backend byte accounting, assert a node-wide delta instead The accounting helper listed the internal predastore bucket to attribute bytes per volume. That listing is refused unconditionally: predastore authorises bucket access by same-account ownership, and the bucket belongs to the service account, so a test caller gets 403 no matter what it holds. Granting the test a service credential would invert the trust boundary to buy a measurement, which is the wrong trade. Replace it with what the S3 surface actually permits: sample node-wide allocated bytes either side of the write and bound the delta against the bytes the guest wrote. Coarser, but it measures something real rather than depending on a call that cannot succeed. The tolerance moves into the suite that uses it. It encodes RS(2,1)'s 1.5x expansion floor plus headroom; a cluster running the recommended RS(3,2) has a 1.667x floor and only ~12% of margin left, so the constant needs revisiting if the encoding changes. * revert: drop memdurability e2e suite The suite asserted the guest read back what it wrote after a memory-constrained concurrent write, but the assertion could not fail for the reason it claimed: it compared the guest's own read against the guest's own write with the page cache still warm, so it passed whether or not the data reached the backend. A test that is green on a build with a known-open durability bug is worse than no test — it advertises coverage that does not exist. Removes the suite and its Makefile/workflow wiring, plus DiscoverInstanceTypeAtLeastMemory, which had no other caller. GuestExecTimeout stays: GuestExec now delegates to it, and the old two-minute hard cap it replaced was a latent trap for any long guest command. * test(e2e): add partial-block concurrent-write durability suite Replaces the removed memdurability suite, which passed on a build that still carried the bug it claimed to test. The engine reaches its read-modify-write path only for a partial block; a fully covered block takes a full-overwrite branch that reads nothing and can lose nothing. The old workload wrote through ext4 with 1 MiB buffers, which the filesystem coalesced into aligned full-block requests: block-layer tracing recorded zero unaligned and zero sub-4096 requests, so the path under test never ran, and writers 4 MiB apart could not collide on a block even in principle. This suite writes the shape the defect needs. Two writers issue concurrent O_DIRECT writes into disjoint halves of the same 4096-byte blocks on a raw, unformatted device, stamping every half with the round number, then drop the page cache and reread with O_DIRECT asserting every half carries the final round. One half reading back at an earlier round is the signature of the lost update. The old suite also could not fail even had it reached the path: its write phase ended in 'wait; sync; sha256sum' and reported sha256sum's exit status, while bare wait returns 0 unconditionally, so writer errors were invisible and a backend ENOSPC presented as a pass. Here each writer's exit status and exact byte count are asserted before any durability claim is made. Working set is 8 MiB rather than 2048 MiB, and the volume is deleted on teardown; the predecessor left roughly 3 GiB of backend per run and twice drove a node under the nearfull watermark. Dispatchable but not in the default suite list until a green run and a demonstrated fail-first against a pre-fix engine exist. * test(e2e): let the fixture own the working-set volume delete The suite deleted the volume in its own cleanup and the fixture deleted it again on close, so every run ended with an InvalidVolume.NotFound from the second attempt. Detach stays — DeleteVolume against a still attached volume is what leaks volumes on teardown — and the delete is left to the fixture so the volume is released exactly once. * test(e2e): gate merges on the partial-block durability suite Verified on one node with the same test binary and workload, varying only the engine: 1758 of 8192 halves reverted a generation against the pre-fix build, 0 of 8192 against the fixed one. That is the fail-first evidence the suite needed before it could be trusted to gate anything. Adding it to the default suite list rather than leaving it dispatchable is the point. Its predecessor sat outside every path that runs, which is how it survived long enough to be discovered green on a build that still lost data. * test(integration): cover the ECR data plane in the front gate The live ecr/ suite drove docker, crane and skopeo against a real registry, yet none of it boots a guest: it needs a registry, an object store and an HTTP client. The in-process gateway already serves the OCI Distribution v2 surface on an ephemeral port with a memory-backed object store, so these run here in 0.18s instead of behind full provisioning. Covers the three claims the live tests made beyond authorization, which is already down here: a push/pull round trip asserting blobs and manifests read back byte-identical, refusal to auto-create a repository on push, and retagging an existing manifest without disturbing the original tag. Content is compared rather than status codes alone. A registry that stores a blob under the wrong digest, truncates it, or serves a different one answers 200 to every request in the sequence. The capacity/load leg deliberately stays live: it exists to put real parallel pressure on a real predastore, and a memory-backed object store cannot make that claim. * fix(e2e): make volume teardown release the volume before deleting it Fixture cleanups drain LIFO, so a suite that creates its instance before its volume tears the volume down first, while it is still attached. DeleteVolume answered VolumeInUse, nothing retried, and the volume was stranded on the node. Reordering the chain cannot fix this — registration order has no way to express the instance/volume dependency. Instead teardown is now self-sufficient for any creation order: it force-detaches, waits for the volume to reach available, and only then deletes. Instance teardown waits for terminated for the same reason, since TerminateInstances returns as soon as the request is accepted. Two things kept the leak invisible. A failing cleanup was logged and forgotten, so a run stayed green with resources left behind; failures are now reported as leaks, failing the bound test or surfacing through Close() for TestMain to fail the run. And a panic in one cleanup aborted the whole chain, stranding every resource behind it; each callback is now isolated. RegisterVolumeTeardown and the fixture had grown separate teardown paths, only one of which detached. Both now share it. |
||
|
Josh Siviour
|
48749576c3 |
test: rebalance E2E into in-process integration tier + shared-guest live scenarios (#556)
* test: add in-process integration test tier Roughly half of the behavioural tests under tests/e2e/ assert control-plane API shapes, authz and error codes that need no live environment, yet they can only run against a tofu-provisioned environment on a scarce self-hosted runner. This adds the tier they can move down to. The real gateway router runs in-process: SetupRoutes() is a pure function of GatewayConfig, so it serves from an httptest server over embedded NATS JetStream with real IAM/STS services and genuine SigV4 verification. Only the daemon side of the wire is faked -- the ec2.*/ebs.* NATS subjects a live node would answer are stubbed per test. Nothing is provisioned and no fixed ports are bound, so the tier runs concurrently on a shared build host and is safe as a CI front gate ahead of the live suites. It is build-tagged and kept out of preflight, which stays unit-only. * test(integration): add IAM/STS client accessors and port the zero-stub authz tests Adds IAMClient/STSClient plus ClientsWithCreds/ClientsWithSessionCreds so a test can act as a principal other than the seeded root user, and stubs the node-discovery subject in StartGateway so call paths that trigger discovery resolve immediately instead of riding out the fan-out timeout. Ports the four enforcement tests that guard on ec2:DescribeRegions, a gateway-local action, so they need no daemon-side stub at all. * test(integration): port remaining IAM/STS authz tests from e2e Ports TestIAMUserCRUD, TestIAMAccessKeyLifecycle, TestIAMUserAuthentication, TestIAMPolicyCRUD, TestIAMPolicyAttachmentEnforcement, TestIAMPolicyLifecycle, TestIAMGroupsLifecycle, TestIAMRolesAndProfiles and TestSTSAssumeRoleAndGetCallerIdentity from tests/e2e/iam/ into the in-process integration tier. Each test now self-bootstraps its own users/policies/roles instead of relying on shared suite-level state, since every integration test gets its own gateway and embedded NATS. TestIAMRolesAndProfiles stubs ec2.IamProfileAssociation.describe because DeleteInstanceProfile always counts live associations over NATS regardless of which guard actually fires. TestIAMCleanup is not ported: it only swept a shared long-lived E2E environment, and every ordering/dependency assertion it made is already covered by TestIAMPolicyLifecycle, TestIAMGroupsLifecycle and TestIAMRolesAndProfiles's own delete-conflict guards. * test(e2e): remove IAM/STS authz tests migrated to the integration tier All 13 signed-request authz tests plus TestIAMCleanup now have faithful, mutation-proven equivalents in tests/integration/ — the gateway dispatches IAM/STS actions directly with no daemon hop, so the in-process tier is a faithful and far cheaper substitute. The iam/ e2e suite now runs only TestIAMInstanceProfileAssociation and TestIMDS. Drop the now fully-dead iam_helpers_test.go alongside the six deleted test files, and remove harness.IAMGroupARN/IAMDeleteGroupBestEffort, which had no remaining caller anywhere in the repo once iam_groups_test.go was gone. * feat(integration): daemon-lite harness for key/tags/routetable/vpc Adds DaemonLite, an in-process stand-in for a live spinifex daemon that subscribes the real key, tags, route table, and VPC/subnet/SG/IGW service implementations directly to their NATS subjects, backed by memory and embedded-JetStream stores. Ports TestKeyPairs, TestTagManagement, TestRouteTableValidation, and TestReplaceRouteConvergence from tests/e2e/single so the integration tier drives genuine daemon-side business logic instead of StubSubject canned replies. vpcd (OVN) is out of scope, so its "vpc.create-sg"/"vpc.delete-sg" acknowledgements are stubbed with a fixed success reply — the SG record itself is still written by the real service impl before that event fires, so the stub only unblocks the synchronous round-trip rather than replacing tested behavior. * ci(e2e): gate live E2E jobs behind the in-process integration tier Runs the in-process integration suite first, on the ci-single runner host rather than inside a provisioned VM, so a broken control plane is caught before either live job pays the Spinifex install. Both e2e_single and e2e_multi now require it, and e2e_status treats a skipped integration job as a failure so the gating status cannot go green on a gate that never ran. Drops the shadow-mode suite selector: targeted per-diff suite selection is not the direction being pursued, and leaving a non-functional shadow job in the gating workflow only invited it to be mistaken for a live gate. * test(e2e): remove single/ tests superseded by daemon-lite ports TestKeyPairs, TestTagManagement, TestRouteTableValidation, and TestReplaceRouteConvergence now have proven-equivalent ports in tests/integration/ (mutation testing confirmed parity). Delete the e2e originals and their runX helpers, along with keypair_test.go's and tags_test.go's file-local helpers left with no caller. generateImportPubKey is shared by other single/ tests so it moves to helpers_test.go instead of being deleted. Slims the manifest-lint baseline for the removed create-call entries. * ci: run the lb e2e suite on multinode only Both e2e jobs filter SUITES by exclusion, and neither excluded lb, so the suite ran twice per e2e run: 354s on single and 654s on multi. Balancing across instances on one node is not a deployment mode we support, and ELBv2 proper requires two AZs, so the single-node run was redundant. Drops ~354s from the single-node job, which is the gate critical path. * test(integration): port 3 of 7 ECR tests to the in-process tier Wires the gateway's ECR control plane (repository/policy/lifecycle metadata over an in-process daemon-lite NATS subscriber, blob and manifest bytes via a memory object store, JWT issuer/verifier keyed off the existing IAM master key) into the integration harness, and ports TestECRControlPlane, TestECRGetLoginPassword, and TestECRIAMAuthorization_AssumedRolePullOnly from tests/e2e/ecr — each proven equivalent by mutation (evaluatePrincipalPolicy forced to allow, and the repo-describe path forced to not-found) before its E2E original was removed. The other 4 authorization tests (PullOnly, ReadOnly, DetachPolicyDeniesImmediately, DeactivatedKeyReturns401) stay on the E2E tier: AttachUserPolicy lacks the AWS-managed-ARN existence-check bypass that AttachRolePolicy/AttachGroupPolicy already have, so attaching AmazonEC2ContainerRegistryPullOnly/ReadOnly straight to a user fails NoSuchEntity in both tiers alike. Left untouched pending a fix to that shared IAM code. * fix(iam): accept AWS-managed policy ARNs on AttachUserPolicy AttachUserPolicy called getPolicyByARN unconditionally, so attaching an AWS-managed ARN to a user returned NoSuchEntity. AttachRolePolicy and AttachGroupPolicy already skip that lookup for AWS-managed ARNs and store them opaquely; the user path was missed when that guard was introduced. ListAttachedUserPolicies had the mirror of the same gap: it resolved every ARN through getPolicyByARN and silently dropped the ones it could not find, so a managed ARN would disappear from the listing rather than round-trip. Evaluation already handled these correctly via resolveAttachedPolicy, so only the write and list paths needed the guard. * test(integration): port remaining 4 ECR authorization tests Ports TestECRIAMAuthorization_PullOnly, _ReadOnly, _DetachPolicyDeniesImmediately, and _DeactivatedKeyReturns401 from tests/e2e/ecr now that AttachUserPolicy accepts AWS-managed policy ARNs. Each was proven equivalent by mutation before its E2E original was removed: PullOnly/ReadOnly/DetachPolicyDeniesImmediately fail when evaluatePrincipalPolicy is forced to always allow, and DeactivatedKeyReturns401 fails when the access-key-active check in resolveECRLongLivedPrincipal is bypassed. All mutants were reverted and a clean run confirmed before committing. tests/e2e/ecr/iam_authorization_test.go is now fully removed — every test it held has an in-process equivalent, and its helpers had no other callers in the package. * ci: select e2e suites by allow-list instead of deny-list Both jobs filtered SUITES by exclusion, so any suite named in neither deny-list ran in both jobs. That is how lb came to run twice per e2e run, and it makes adding a suite silently fan it out everywhere. Each job now names the suites it is eligible to run. Selection is still driven by SUITES, so this is behaviour-preserving for the current default: single/iam/cert on the single-node job, multinode/lb/cert on the multi-node job, exactly as before. eks, ecs and storagegrowth are listed as eligible on the single-node job but are not yet in the default SUITES. * test(e2e): delete seven tests with no coverage TestFinalClusterStats and TestInstanceLaunch assert nothing beyond what other callers of their shared helpers already imply. The multinode baseline, volume, guest-SSH, and preflight tests duplicate single-node coverage or exercise per-guest behaviour that isn't cluster-specific. TestMultinodeInstanceDistribution can't fail: three independent RunInstances calls with no placement group make a strict spread assertion flaky and a loose one meaningless. Preflight checks (/dev/kvm writability, peer SSH reachability) move into requireMultiNodeFixture so the package fixture singleton still fails fast with a clear message instead of disappearing along with the dedicated test. The remaining callers of needInstanceTrio (CrossNodeOps, CrossNodeGateway, NodeFailure, VolumeDurability) still trigger the shared trio launch on their own, so removing the distribution and volume-lifecycle tests doesn't leave it unbuilt. Also slims the manifest-lint baseline entry for the deleted multinode volume test. * fix(e2e): require full 3-node spread in TestMultinodeSpread SpreadPlacement passed at unique>=3, warned via t.Logf at unique==2, and only failed below that. A 33% spread failure (two instances colocated) passed with a log line. The 243.6s NAT-egress scenario that follows only proves what it claims to if the private trio actually landed on three distinct chassis, so that premise needs to be a hard assertion, not a warning. * refactor(e2e): drop the unused spread-assertion harness helpers AssertSpreadAcrossNodes and CountInstancesPerNode lost their only caller when the instance-distribution test was removed. Beyond being dead, the assertion helper documented minNodes=1 as an acceptable logging-only mode inherited from the bash driver, which is the pattern that let a placement test pass while every instance landed on one node. InstanceHostingNode and its ps helpers stay; five multinode tests use them. * fix(ec2): stop leaked goroutines on prepareEFIVolume error paths newViperblock starts the chunk uploader and WAL syncer unconditionally, but prepareEFIVolume only released them on the happy path via Close(). Six error returns between acquisition and Close left both goroutines running. Add a defer immediately after acquisition, matching the sibling prepareRootVolume; Close() remains the durability boundary. * test(predastore): add real predastore fixture for integration tests Extract predastore_integration_test.go's inline daemon startup into a reusable testutil/predastore package so tests/integration can point DaemonLite-style wiring at a real S3-compatible backend instead of an unreachable host. Kept as its own leaf package rather than folding into the shared testutil package: it transitively imports predastore's quicclient, whose package-level connection pool starts a permanent goroutine at init that would trip goleak checks in any of the ~80 other packages that import testutil for unrelated NATS helpers. * test(integration): migrate CreateVolume to assert real predastore persistence Add StartVolumeDaemonLite, an opt-in DaemonLite variant wired to the real predastore fixture, and migrate TestCreateVolume_PersistsToRealPredastore off memory-backed DaemonLite so CreateVolume/DescribeVolumes exercise viperblock's real S3 backend end to end instead of stopping at input validation. * test(integration): add real storage-state oracle for CreateVolume DescribeVolumes only proves the handler's own read path agrees with its own write path, both via the same deserialization; it cannot catch a bug in a field it never re-derives (e.g. a unit-conversion error in the bytes handed to viperblock, since VolumeMetadata.SizeGiB is copied from the request directly). vbscan reads a volume's persisted config.json and chunk objects straight over S3, independent of any spinifex handler code, so TestCreateVolume_PersistsToRealPredastore can assert on what viperblock actually wrote rather than only on what the handler claims. vbscan is a local reimplementation of scripts/vbrefscan's read-only scan rather than an import: spinifex cannot depend on mulga, the module that contains it. It only reimplements the config/chunk-listing half of vbrefscan — the checkpoint-based reference-integrity half needs viperblock.ParseBlockCheckpointBytes, which does not exist in the viperblock version spinifex currently depends on (v1.12.1) and is also moot for this volume: CreateVolume never calls SaveLiveCheckpoint, so a freshly created volume has no checkpoint to scan regardless of version. * refactor(test): move the predastore daemon fixture out of the coverage scope test-cover runs go test ./spinifex/..., so anything under spinifex/ is compiled and measured. The daemon fixture cannot be exercised by unit tests, so it reported a coverage gap no unit test could close. The e2e harness already avoids this by living under tests/; the fixture now does the same. vbscan stays put, being ordinary library code with its own unit tests. * test(integration): migrate RunInstances multi-count expansion off live guests RunInstances with MinCount/MaxCount=2 expands into a single per-node targeted launch (distributeInstances in gateway/ec2/instance/placement.go) before the daemon-facing NATS hop, so the real gateway router plus a stubbed daemon response is sufficient to prove it — no throwaway VM is needed to exercise the expansion logic itself. The live single-node E2E test's WaitForInstanceState/TerminateInstances sequence was teardown hygiene for the real guests it booted, not an assertion of the expansion behavior, so it is dropped rather than emulated. The migrated test additionally asserts the per-node launch request itself carries MinCount=MaxCount=2, proving the count actually propagates rather than the launch succeeding by coincidence or via the zero-daemon degenerate path in placement.go. * docs: drop a doc reference to the deleted live test * test(integration): migrate launch-template RunInstances expansion off live guests RunInstances --launch-template resolves ImageId/InstanceType from the stored template entirely gateway-side (expandLaunchTemplate, before validation/placement/the daemon-facing NATS hop), so proving it forwards the resolved fields never needed a real guest boot. Ports the assertion to tests/integration via a new opt-in StartLaunchTemplateDaemonLite (real LaunchTemplateServiceImpl over embedded JetStream) plus a direct subscription on the per-node launch subject to capture what the gateway actually dispatched, rather than only the client-visible response. The live test keeps its CRUD/versioning lifecycle (create/modify/delete version, tag-filtered describe) — none of it touches a guest — and drops only the RunInstances-from-template + wait-for-running + terminate tail, whose only job was waiting out a real boot to read back fields already proven resolved. * test(integration): migrate KV-only account-scoping checks off live tenants Ports the KeyPair/VPC-Subnet/IGW-EIGW/AccountSettings cross-account isolation assertions from tests/e2e/single/account_test.go to the in-process integration tier. Each of these resources resolves ownership from a plain account-scoped KV key (utils.AccountKey(accountID, id), or an account-keyed settings record) with no vm.Manager or real guest involved, so DaemonLite now also wires the real EgressOnlyIGWServiceImpl and AccountSettingsServiceImpl alongside the existing VPC/IGW/Key services. Two independently minted tenant accounts (via IAMService.CreateAccount/CreateUser/CreateAccessKey/CreatePolicy/ AttachUserPolicy, in-process — the same calls runAccountCreate makes without the CLI/stdout round-trip) replace the live tier's carousel so isolation is checked between real, separately owned accounts. Left live: instance scoping (Step2) and volume scoping (Step3) — checkInstanceOwnership, the actual cross-account gate for stop/start/ reboot/terminate/attach-volume, runs daemon-side only after a real vm.Manager lookup, so it cannot be exercised without a live guest. Snapshot scoping (Step5) needs a real backing volume for CreateSnapshot (viperblock, out of DaemonLite's scope), so it stays live entirely rather than split off only its two KV-only assertions. Global-resources (Step9) carries no account branching in the handlers at all, so asserting its equality across two accounts wouldn't exercise anything a fake node responder didn't already trivially satisfy — not migrated. * test(integration): migrate launch-template CRUD lifecycle off live guests TestLaunchTemplates booted zero guests: its RunInstances coverage had already moved to TestRunInstances_LaunchTemplateExpansion, leaving only template CRUD/versioning assertions occupying a full live-cluster slot. Port the remaining create/describe/version/modify/delete lifecycle, including the SourceVersion merge and a nested timestamp round-trip, into TestLaunchTemplates_CRUDLifecycle against the in-process integration gateway. * refactor(tests): move spot instance lifecycle coverage to integration tier RequestSpotInstances is a mock over on-demand RunInstances (no bidding, interruption, or reclamation), so booting real VMs in the e2e tier proved nothing spot-specific. Migrate the SIR CRUD lifecycle (request, describe, cancel, close-on-terminate, insufficient-capacity error) to a NATS-level integration test that exercises the real gateway orchestration and daemon service impl without a live guest. Real-VM-boot assertions are already covered by TestRunInstances_MultiCountExpansion and the e2e baseline tests. * fix(tests): share one embedded NATS server across the integration package ClientTokenStore in spinifex/gateway/ec2/instance is a process-wide sync.Once singleton bound to whichever *nats.Conn first initialises it. Every integration test booted its own embedded NATS server, so the first RunInstances-calling test captured the singleton, and any later test inherited a KV handle bound to that server's now-closed connection. TestMain now boots one embedded NATS+JetStream server for the whole package; every StartGateway call connects into its own dynamically provisioned NATS account (accountAuthenticator in shared_nats.go), giving each test a private JetStream namespace despite the shared server, and none of the per-test connections are closed until every test has finished - whichever one the singleton latches onto stays live for the run. Also wire the suite into the required PR gate: it was previously only invoked from e2e.yml's push-triggered (main/dev), self-hosted "Integration (front gate)" job, so a regression here never blocked a PR. The whole package runs in single-digit seconds, so it now runs inline in `make preflight` and as its own step in spinifex.yml's build_and_test job. * test(integration): migrate serial-console access checks off live guests Enable/Disable/GetSerialConsoleAccessEnabled is pure gateway+account-settings logic with no guest involved, so it moves to the in-process integration tier against the real AccountSettingsServiceImpl wired into DaemonLite. * test(integration): migrate DescribeImages round-trip off live guests runImage's AMI describe round-trip needs no real cluster: it registers an AMI against a hand-seeded snapshot via the real ImageServiceImpl, backed by a new StartImageDaemonLite helper wiring RegisterImage/DescribeImages onto an in-memory object store. * test(integration): migrate predastore object lifecycle off live guests runPredastoreObjectLifecycle only needs a real predastore daemon, not a tofu-provisioned cluster: it now runs against tests/fixtures/predastore's in-process fixture, covering the same create/put/get/delete/list contract. * test(integration): migrate ListFoundationModels catalog check off live cluster ListFoundationModels is pure gateway-side static catalog logic with no NATS/daemon hop, so it moves to the integration tier via a new BedrockClient harness accessor; this tier configures no credential resolver, so the Anthropic entry's absence is asserted explicitly rather than left optional. * test(integration): cover RunInstances client-token idempotency Proves replaying the same ClientToken through the real gateway returns the original reservation without a second daemon dispatch, and a different token launches independently. * test(integration): cover RunInstances launch-template expansion Proves version selection (omitted Version resolves to the template default, explicit Version selects that version) and field precedence (explicit RunInstances parameters override the template, unset fields inherit it) through the real gateway. * test(integration): cover RunInstances malformed-input rejection Proves a malformed ImageId and a malformed targeted-launch CapacityReservationId are rejected before any NATS dispatch, with no daemon stub registered so a regression that let either through would fail fast instead of hanging. * test(integration): cover RunInstances iam:PassRole enforcement Proves a caller granted ec2:RunInstances but not iam:PassRole on an instance profile's role is denied, and the identical session succeeds once PassRole is granted for that exact role ARN. * test(integration): cover RunInstances placement-group strategy routing Adds a placement-group daemon-lite wiring a real PlacementGroupServiceImpl over NATS, then proves spread strategy assigns exactly one instance per node while cluster strategy pins the whole launch to the single highest-capacity node. * test(integration): cover RunInstances capacity distribution across nodes Proves the default (non-placement-group) path packs a multi-instance launch across nodes proportionally to spare capacity rather than exhausting one node first. * test(e2e): merge SameSGComms and SGToSGDatapath around one client/target pair Both booted their own instance pair to check SG-to-SG datapath enforcement and same-default-SG east-west connectivity. Merging them around one shared client/target pair cuts four boots to two, and converting the inline harness.Step sequence into named t.Run stages (PortGroupMembership, AllowedTraffic, DeniedTraffic, RevokeAndVerifyBlocked, ReauthorizeAndVerifyRestored, SameSGComms) gives each its own pass/fail attribution instead of one opaque test result. SameSGComms now runs last and joins the default SG onto each ENI via ModifyNetworkInterfaceAttribute only after every SG-to-SG allow/deny assertion has already recorded its own result, since the default SG's self-reference rule admits all traffic between co-members and would otherwise defeat the denied-traffic check. * test(e2e): merge default-SG reachability, guest DNS, and egress enforcement DefaultSGReachabilityBaseline, GuestDNSResolution, and SecurityGroupEgress each booted their own instance to check one facet of "a guest is reachable only when policy says so": ingress deny/authorize, resolver + WAN egress, and egress ACL enforcement. Merging them around one shared guest cuts three boots to one, with named t.Run stages (Deny, Authorize, Resolver, WANEgress, RevokeEgress/RestoreEgress) giving each its own attribution. The egress revoke/restore round-trip now mutates this scenario's own dedicated SG instead of the shared default SG the rest of the suite depends on, isolating its egress-rule mutation from every other test. * fix(ci): single-quote e2e test_run regex across the ssh boundary * fix(e2e): anchor SG egress-enforcement probe to a WAN IP, not the gateway * test(e2e): merge single-node guest churn tests into one durability scenario Combines TestSSHProbe, TestENIHotplug, TestENIHotplugReconcile, TestVolumeDurability, TestModifyInstanceAttribute, and TestRebootInstance into TestGuestChurnDurability, a single shared-guest scenario that re-verifies a data-integrity sentinel sha256 after every perturbation stage (ENI hotplug, daemon restart, ENI detach, instance-type resize, stop/start, reboot). This proves the sentinel survives the full churn sequence rather than just one isolated stop/start. * fix(vpc): clear subnet drop gate when installing egress reroute A subnet with an attached IGW but no 0.0.0.0/0 route carries a priority-1100 drop gate on the VPC router. When a route later lands (NATGW reroute at 900, IGW reroute at 1000) the reroute is installed but the drop gate was never removed, so the higher-priority gate wins and black-holes the subnet's egress in lr_in_policy before it reaches routing or SNAT. This left NAT-gateway private-subnet egress with 100% packet loss: the SNAT stage saw zero packets and no conntrack was committed. Remove the subnet's drop gate for the same prefix once a reroute is installed. Idempotent and prefix-scoped, so a specific-prefix reroute is a no-op and leaves the default gate intact. * test(e2e): merge VPC subnet, NAT gateway, and EIP single-node tests Merges the former TestVPCSubnetE2E, TestNewVPCEgressBaseline, TestNATGateway, and TestInstanceEIP into one staged scenario, TestVPCEgressPaths, around one scenario-owned VPC and its two guests, cutting five guest boots to three. The public guest serves PublicSubnetEgress, then the NAT Gateway bastion hop, then (last, since association rewrites its public IP) the EIP flip. The private guest serves the NAT Gateway path, launched directly into the same VPC's already-existing private subnet instead of a dedicated one. RouteBeforeSubnet keeps its own second VPC and instance since it exercises the implicit main-route-table code path, a different one than the explicit route table this scenario's own VPC uses for its public subnet — collapsing the two would drop coverage of whichever path got merged away. The NAT Gateway up/down flip now repeats for an env-tunable round count (SPINIFEX_VPCEGRESS_NAT_ROUNDS, default 1), matching every other merged single-node scenario. * test: TEMPORARY mutation-check — revert |
||
|
Josh Siviour
|
908bfbfc27 |
fix(ecr): enforce IAM authorization on OCI registry operations (#548)
Treat the ECR registry JWT as a signed identity pointer rather than a permission grant. Every /v2/* request now rehydrates the token's access key against current IAM/STS state, maps the OCI route to an ecr: action and repository ARN, and runs the identity-policy evaluator before dispatch. PullOnly/ReadOnly principals can no longer push, overwrite tags, or delete manifests, and key/session/user/role/account/policy revocation takes effect on the next request instead of at token expiry. Cross-repository blob mounts now require source-read permission and proof the digest is referenced by a manifest in the named source repo, closing an account-wide blob-fishing gap. |
||
|
Ben Duncan
|
28a876d17d | feat(dns): resolvable ALB/NLB + EKS DNS, forwarder hardening, cross-tenant reconcile (#532) | ||
|
Josh Siviour
|
369025f86e |
fix(e2e): fail fast on reaped instance launch + emit APM error on MarkFailed (#531)
WaitForInstanceState now aborts immediately with the recorded StateReason message when it observes a reaped state (shutting-down/terminated) while waiting for a live target, instead of burning the full 5-minute timeout on an instance that can never reach it. MarkFailed takes a context and records the failure on the active span via span.RecordError so a reaped launch surfaces in the APM error stream, correlated by trace id. Only the LaunchRunInstances path carries a live span; other callers pass context.Background() and the record is a no-op. Surfaced by RCA of E2E run 29258398516 (TestAccountScoping/Step2). |
||
|
Josh Siviour
|
4b877c6a93 |
fix(e2e): resolve WANHost from spinifex.toml advertise on single-node (#527)
discoverSingleNodeIPs seeds 127.0.0.1 then appends net.InterfaceAddrs() in undefined order, so WANHost=nodeIPs[0] was loopback and the guest gateway URL helpers fell through to the first non-loopback interface addr — an arbitrary co-tenant bridge on multi-bridge shared hosts (wattle: br-lan-env1..23, br-wan), leaving guest VMs unable to reach the advertised gateway to register. Resolve WANHost from spinifex.toml nodes.<node>.advertise (falling back to that node's host), mirroring awsgwBindIP's toml scan; fall back to the first non-loopback discovered addr only when config is unreadable. This removes the need for the SPINIFEX_WAN_IP override on shared hosts. |
||
|
Josh Siviour
|
cee73671ff |
feat(bedrock): Ochre runtime MVP — Converse over self-host + Anthropic-direct (#520)
* feat(bedrock): Ochre runtime MVP — Converse over self-host + Anthropic-direct Add the AWS-Bedrock-compatible gateway services (bedrock, bedrock-runtime) following the EKS REST-JSON pattern: ListFoundationModels / GetFoundationModel over a static connectivity-tiered catalog, and non-streaming Converse routed per modelId to one of two provider backends — self-hosted vLLM (OpenAI wire) and Anthropic-direct (Anthropic Messages wire). Per-account provider API keys are a master-key-encrypted JetStream KV secret with an optional platform default; the advertised catalog gates external models on a resolvable credential. Self-host endpoints are pinned via config (OCHRE_VLLM_ENDPOINTS) behind an EndpointResolver seam. Adds gateway/bedrock/ (catalog, provider router, Anthropic + vLLM adapters, credential store), awserrors REST-JSON codes, and the bedrock E2E suite (list/get light; Converse gated on live backends). Daemon/NATS control plane and dynamic endpoint lifecycle are deferred to Phase 3. * test(bedrock): cover dispatch, router, credentials KV + endpoint config Add unit coverage for the Ochre Phase 1 diff: Bedrock_Request / BedrockRuntime_Request end-to-end dispatch, provider router, JSON response/error writers, upstream-status mapping, the credential-store KV round-trip, the Anthropic bound-provider path, and parseBedrockEndpoints. Lifts PR diff coverage above the 60% gate. |
||
|
Josh Siviour
|
9f349e86ca |
feat(eks): expose NVIDIA GPUs to pods (Epic B) — VFIO QMP, worker registration, device-plugin GPU access (#507)
* feat(eks): expose NVIDIA GPUs to pods via CDI device plugin GPU nodegroups now label workers nvidia.com/gpu.present=true and taint them nvidia.com/gpu=present:NoSchedule (via a k3s config.yaml.d drop-in, since k3s has no K3S_NODE_TAINT env), and stage a hidden nvidia-device-plugin addon that addon-sync renders into the K3s auto-deploy dir. The device plugin runs with --device-list-strategy=cdi-cri and is gated to GPU nodes by nodeSelector + toleration, advertising nvidia.com/gpu allocatable so pods land on GPU nodes and get the device injected via the CDI spec baked by mulga-cdi-generate. Relies on containerd 2.0.5 default enable_cdi=true (no config fork). * fix(vm): scale QMP greeting deadline for VFIO passthrough guests A GPU passthrough guest (-device vfio-pci + large -m) must lock and DMA-map its entire guest RAM through the IOMMU before QEMU's QMP monitor answers, which exceeds the fixed 30s greeting deadline and gets the VM SIGKILLed at launch. Parameterize the greeting timeout (NewQMPClientWithGreetingTimeout) and scale it to 180s for VMs with GPU attachments; plain VMs keep the 30s default and reconnects against an already-running QEMU keep it too. * fix(eks): register GPU workers reliably and expose GPUs to pods Three fixes let a GPU nodegroup worker boot, register, and advertise its GPU: - k3s-agent.service gains Delegate=yes (plus KillMode/TasksMax/limits and overlay/br_netfilter modprobe): k3s embeds containerd+kubelet in-process, so on cgroup-v2 the kubelet cannot create /kubepods without a delegated subtree and ContainerManager.Start fails before Node registration. - The GPU node label rides a k3s config drop-in (20-gpu.yaml node-label + node-taint) instead of K3S_NODE_LABEL, which k3s ignores; without the label the nvidia-device-plugin nodeSelector never matches. - Raise the nodegroup ready timeout to 20m for the ~7min GPU first boot. Adds the GPU e2e (VPC + NAT-GW egress harness) and a slog-restore unit test. * fix(eks): install ecr-credential-provider on the GPU node AMI The GPU worker's kubelet is started (from nodegroup userdata) with --image-credential-provider-config + --image-credential-provider-bin-dir= /usr/local/bin, but the eks-node-gpu AMI never built or installed the ecr-credential-provider binary. kubelet treats a referenced-but-missing provider binary as a fatal RegisterCredentialProviderPlugins error, so the node crash-loops and never registers (while the Alpine eks-node worker, which ships the binary, joins fine). Build + install it in the GPU manifest; the server-only binaries stay omitted since GPU nodes are agent-only. Also tee k3s-agent stderr (and its embedded kubelet klog) to the serial console: Ubuntu logs only to journald, which is off-box-invisible on a worker in an isolated customer VPC, so a kubelet that fails to register left no trace. * fix(eks): give the nvidia-device-plugin its own GPU access The CDI-mode device plugin (--device-list-strategy=cdi-cri) must run nvml.Init and generate the CDI spec in its own container, but the DS had no GPU wiring, so nvml.Init crash-looped and nvidia.com/gpu was never advertised. Run the DS under the k3s-auto-configured nvidia runtimeClass with NVIDIA_VISIBLE_DEVICES/CAPABILITIES=all, the host root mounted read-only at /driver-root so it can locate the driver libs + ld.so.cache, and /var/run/cdi mounted writable so the generated spec is visible to containerd. No enable_cdi drop-in is needed on k3s v1.32.5 / containerd 2.0.5. GPU workload pods still need only resources.limits nvidia.com/gpu. Live-validated end-to-end on the single-GPU host (RTX A1000): baked control-plane AMI, GPU nodegroup, nvidia.com/gpu allocatable, nvidia-smi pod, zero manual intervention. * test(ec2): drop obsolete restoreSlogDefault test Rebased onto dev, which dropped the restoreSlogDefault workaround in #506 (viperblock no longer mutates the global slog). The test referenced the now-deleted helper and no longer compiles. Real GPU/registration diff is independently covered (diff coverage 95.3%). |
||
|
Josh Siviour
|
e262ee0064 |
fix(elbv2): reap LBs wedged in provisioning + harden IMDS bootstrap (#496)
An ELBv2 LB whose system VM launches but whose in-guest lb-agent never delivers a first heartbeat previously stayed in provisioning forever with an empty StateReason: promotion to active happens only on the first heartbeat and the only provisioning->failed transitions were at create/launch time. A single wedged LB in the multi-node e2e lb suite leaked its listener/target-group and cascaded into ResourceInUse and DependencyViolation on VPC teardown. - Add a lifecycle reaper that marks failed any LB still provisioning past lbProvisioningTimeout (4m) with no heartbeat, reusing markLBFailed, and populate a provisioning StateReason so a stuck LB is self-describing. Started once at daemon startup; stopped on service Close. - Harness: add ErrLBProvisioningTimeout and treat a provisioning-timeout as retryable in createActiveLB; register idempotent LB/listener teardown up-front so no exit path leaks into the shared VPC. - IMDS: bounded retry+backoff on the instance-fact and user-data lookups so a transient gather timeout under multi-node load does not starve the lb-agent bootstrap. |
||
|
joshsiv-mulga
|
96909d0e9a |
fix(e2e): retry LB creation on sys.micro capacity reclaim race in lb suite
The internal lb subtests raced the previous subtest's sys.micro VM deallocation: fixed 15s sleeps were not enough on capacity-tight single nodes, so the LB entered terminal state failed (insufficient capacity, then nats no-responders after the daemon unsubscribed the full topic). Replace the sleeps with createActiveLB: create LB + listener, wait for active via the new non-fatal harness WaitForLBActiveErr, and on a terminal failed state (wraps ErrLBTerminalFailed) tear down fully and retry with backoff, up to 3 attempts. |
||
|
Josh Siviour
|
491f5fa7b9 |
fix: claim gateway cr-port on every reconcile miss + surface node launch failures (siv-499) (#463)
* test(e2e): capture SNAT datapath on NAT GW egress failure TestNATGateway captured nothing when the private-VM egress probe failed, so the baremetal nightly's intermittent 100% packet loss left no OVN/OVS state in the failure bundle to root-cause it. Register harness.OnFailure before the egress-verify poll to dump the SNAT datapath (OVN show, NAT rules, port bindings, br-int flows, conntrack, ARP) keyed on the NAT GW external IP, matching the eip/vpc datapath tests. Also add a br-ext localnet flow capture to dumpDatapathState: br-int flows miss the egress hop where SNAT'd traffic leaves for the physical uplink, which is exactly where an egress black-hole would show. * test(e2e): add OVN pipeline diagnostics to NAT GW egress capture Capture the gateway router's per-stage logical-flow packet counts (ovn-sbctl --stats lflow-list), MAC_Binding, static routes and the VM's logical switch port alongside the existing OVS/conntrack/ARP dumps. When the SNAT flow reads n_packets=0 while the guest transmits, these pinpoint which pipeline stage drops the packet upstream of lr_out_snat. * test(e2e): dump full lflow-list + datapath ct/flows for egress RCA The IP-filtered lflow dump hides the default-drop ACL flow (its match carries no IP), so a pre-SNAT egress drop at ls_out_acl only showed the allow-flows at n_packets=0, never the deny that ate the packets. Replace it with a full ovn-sbctl --stats lflow-list, echoed so it survives in the CI stdout log. Swap the conntrack capture to ovs-appctl dpctl/dump-conntrack (the standalone conntrack binary is absent on the baremetal runner) and add dpctl/dump-flows -m for kernel megaflow hit counts. * fix: claim gateway cr-port on every reconcile miss and stop masking launch failures ensureGatewayClaimed nudged ovn-controller recompute only once then polled until timeout, so a fresh VPC bring-up or chassis flap that fired the single nudge too early left the gateway chassisredirect port permanently unclaimed. Recompute on every miss instead, mirroring ensureGuestPortDatapath. aggregateResults and distributeInstancesSpread masked any node launch failure (including the resulting 5-minute launch timeout) as InsufficientInstance Capacity. Surface the real node error when one exists; keep the capacity code only for genuine capacity shortfalls. |
||
|
Julian Sommer
|
63437f759b | feat: IAM Group inline policies (#455) | ||
|
Julian Sommer
|
c9629d3bf6 | feat: IAM Groups v1 (#449) | ||
|
Josh Siviour
|
47c9808a96 |
test(e2e): add ECS end-to-end suite (awsvpc, bridge, host, ELB service) (#439)
Drives the ECS data plane against the local awsgw: a customer VPC plus a real container instance launched from the spinifex-ecs-node AMI, then standalone tasks in all three network modes and an awsvpc service fronted by an ALB target group. Adds an ECS client to the harness, a Makefile target, and a service-interfaces suite entry. bridge/host tasks share the host netns where the agent credential endpoint owns 169.254.170.2:80, so they run a no-port command and assert placement + mode; awsvpc and the ELB service prove real :80 serving. waitTaskRunning re-checks after a settle so a transient RUNNING cannot pass. |
||
|
Julian Sommer
|
8a94886b13 | feat: cloud-init EC2 datasource (#411) | ||
|
joshsiv-mulga
|
5fa12ec358 |
fix(e2e): skip stopped node in multinode NATS peer poll
StopNode now stops spinifex-nats.service, so WaitNATSPeers polling that node's dead 127.0.0.1:8222 monitor port fails with curl exit 7 and never converges. Add WithSkipNodes to exclude the stopped node from the poll; TestMultinodeNodeFailure skips node2. |
||
|
Julian Sommer
|
fa066a64d7 | fix | ||
|
Julian Sommer
|
e11437cec9 | feat(imds): per-tap responder datapath (#408) | ||
|
Bryn Mailer
|
15dede64ad |
feat: predastore compaction E2E (#407)
* feat: add predastore compaction E2E
Inject a short compaction interval into test-cluster predastore config via a
new --predastore-compaction-interval flag on admin init/join, gated so
production output stays byte-identical when unset. Add a harness helper that
drives write-then-delete churn against predastore S3, brackets it with
du-over-SSH usage, and asserts end-of-churn usage settles below 70% of the
churn peak; wire it into the multinode suite as TestPredastoreCompaction.
* fix: compaction E2E gate writes churn to its own bucket
The reclaim gate signed PutObject against the config-defined system
'predastore' bucket, which belongs to account 000000000000 with only a
static [[auth]] grant. The harness admin identity is a different IAM
account, so predastore returned 403 AccessDenied cross-account.
Create a per-run bucket the admin identity owns (AdministratorAccess)
and churn into it. Objects still erasure-code into distributed/nodes/
node-* so the du-based reclaim measurement is unchanged. The gateway
(:9999) does not proxy S3, so the client stays predastore-direct.
* test: run predastore compaction gate before destructive node tests
The compaction reclaim gate was declared last in the multinode suite, so it
measured shard-store usage after NodeFailure/NodeRecovery had torn down and
restarted node2. NodeRecovery only gates on NATS/gateway/EC2 readiness, not
predastore, so node2's shard store was still settling and the du baseline came
back empty. Move the test before the destructive node tests so it runs against
a pristine, fully-converged cluster primed by the volume tests.
* fix: race-free SSH output capture + empty-tolerant du probe
The compaction reclaim gate crashed with ParseInt("") when node1's du
probe returned empty combined output. Harden the probe and the SSH layer:
- ssh.Run used one bytes.Buffer for both session.Stdout and session.Stderr,
which x/crypto/ssh copies in two concurrent goroutines — a data race on a
non-concurrent-safe type. Switch to session.CombinedOutput, which guards the
combined stream with a mutex-wrapped singleWriter.
- shardStoreUsageBytes now terminates the remote command with a sentinel echo.
A missing sentinel is reported as output lost in SSH retrieval; a present
sentinel with no number is treated as a 0 measurement (anomalous, logged)
instead of crashing the gate.
The sentinel lets the next run distinguish a transport-layer drop from a
genuinely empty remote measurement.
* test(e2e): replace predastore du-reclaim gate with object lifecycle contract
The multinode compaction gate measured shard-store disk usage over SSH (du)
and asserted reclaim after churn. It could never pass: segments only seal at
the 4 GiB roll threshold, so test-scale churn produces no compactable segment,
and the du probe read 0 bytes before and after. Reclaim correctness is already
covered deterministically by predastore's store-level unit tests.
Delete AssertPredastoreCompaction and its du/churn/poll/sentinel machinery,
the harness unit tests that exercised them, and the multinode TestPredastore
Compaction entry. Add a single-node TestPredastoreObjectLifecycle that checks
the user-visible contract: an object is readable after PutObject, gone after
DeleteObject (GET returns NoSuchKey and ListObjectsV2 is empty), and the store
keeps serving fresh writes. newPredastoreS3 is retained, refactored to take a
host so it works outside the multinode cluster type.
* test(e2e): drop orphaned multinode TestPredastoreCompaction
Complete the du-reclaim -> object-lifecycle refactor: remove the
multinode TestPredastoreCompaction caller (and its now-unused context
and harness imports) that still referenced the deleted
harness.AssertPredastoreCompaction, which broke e2e-build. Wire the
single-node TestPredastoreObjectLifecycle entry that replaces it.
|
||
|
Josh Siviour
|
5025a37006 |
feat: Containers — internal-ECR pulls, DNS-free registry, EKS hardening + docs (#409)
* docs: add Containers section with EKS and ECR service pages
New docs/containers/{eks,ecr} pages covering each service via AWS CLI, the Spinifex console, and Terraform, plus the requisite VPC/IGW/NAT/SG/IAM setup. EKS page embeds console screenshots. Cross-links the EKS Terraform workbooks.
* docs(eks): rework Terraform workbooks into a capability ladder
Rework the three EKS workbooks into a coherent ladder and publish them to
the Containers section. All tiers are single- or three-node capable via
node_desired_size and serve a shared Spinifex-themed demo app from ECR,
replacing nginxdemos/hello.
- demo-app: new std-lib Go web app (themed page reporting pod/node/cluster/
region + hit counter; optional /data persistence), distroless image.
- eks-quickstart: node_desired_size var, ECR repo + themed app over NodePort.
- eks-https-ingress (was eks-addons-access): HTTPS via the aws-load-balancer-
controller addon + ACM, public/private VPC with NAT, managed-ingress=false.
- eks-gitops-argocd (was eks-https-ingress): Argo CD addon syncs the app from
a git repo, aws-ebs-csi-driver PVC (Viperblock-backed) for state, access
entry RBAC, HTTPS Ingress carried over.
Pending live e2e verification (image build/push, apply, ALB + PVC bind).
* fix(ecr): implement ListTagsForResource (empty tags) for client parity
The AWS provider calls ecr:ListTagsForResource on every repository read, which
returned 501 NotImplementedException and broke 'tofu apply' of any workbook that
creates an aws_ecr_repository. Implement it to return an empty tag set (resource
tagging stays a deferred feature) so reads succeed. Drop the tags block from the
three EKS workbooks' ECR repos so the provider doesn't call the still-stubbed
TagResource on create.
* feat(eks): pull from internal ECR via kubelet credential provider
Worker nodes could not pull custom images from the internal Spinifex ECR
registry: the eks-node had no DNS for the registry host, no containerd CA
trust, no port rewrite to :9999, and no pull credentials. Only public
images worked.
Add cmd/ecr-credential-provider, a kubelet exec credential provider that
fetches the node IAM-role credentials from IMDS, calls GetAuthorizationToken
against the gateway ECR endpoint, and returns the minted AWS:<jwt> as Basic
auth for the registry host. Thread the gateway URL, account, region, and
internal suffix into the agent userdata, which now writes the gateway CA,
a registries.yaml (CA trust + :9999 endpoint), the kubelet
credential-provider config and config.yaml.d drop-in, and an /etc/hosts
entry mapping the registry host to the gateway IP. Ship the provider binary
in the eks-node AMI.
Also remove a stray paragraph from the admin-cli README.
* fix: dial EKS ECR registry mirror by gateway IP
cloud-init manage_etc_hosts rewrites /etc/hosts from the alpine template on
every boot, wiping the registry-host mapping appended via bootcmd, so worker
nodes could not resolve the internal ECR host and pulls failed with no such
host. Point the k3s registries.yaml mirror endpoint and tls config at the
gateway IP instead (the gateway cert carries an IP SAN), keeping the pod image
ref port-less and dropping the DNS leg until northstar lands. Fall back to the
hostname endpoint when the gateway is not an IP.
* fix: attach node-role instance profile to EKS workers for ECR
EKS workers launched with no IAM instance profile, so IMDS served no role and
the ECR credential provider could not mint a registry token, leaving internal
ECR pulls failing with 401. Real EKS implicitly creates an instance profile for
the node role; do the same here. Wire a KV-backed IAM service into the EKS deps
and, at worker launch, find-or-create an instance profile named for the node
role, attach the role, and pass it to RunInstances so IMDS exposes the role to
the credential provider.
* feat: use mulga logo in EKS demo app
* feat: add ACM certificate tag support (List/Add/RemoveTags)
Implements ListTagsForCertificate, AddTagsToCertificate and RemoveTagsFromCertificate across the store, service, NATS, daemon and gateway layers. Import now persists tags. Fixes terraform aws_acm_certificate InvalidActionException on ListTagsForCertificate.
* test: cover ACM tag gateway and NATS wrapper paths
* feat: support EKS nodegroup tags (Tag/Untag/ListTags)
Extends EKS tag ops to back nodegroup ARNs alongside cluster ARNs. Nodegroup create-time tags persist on the record and echo via DescribeNodegroup, giving the terraform-aws provider a clean default_tags round-trip. Fixes aws_eks_node_group TagResource 501 NotImplementedException.
* fix: provision EKS ALB ingress via node credentials
The aws-load-balancer-controller addon could not provision an ALB. Three fixes:
- TLS: the controller's per-service ec2/elbv2/acm SDK clients install their own
BaseEndpoint resolver and build an HTTP client that bypasses AWS_CA_BUNDLE,
falling back to the Go system trust pool and rejecting the gateway cert as
'unknown authority'. Add SSL_CERT_FILE so the gateway CA joins the system pool.
- Credentials: an empty AWS_ROLE_ARN beside the web-identity token file
half-arms the SDK web-identity provider, which then signs anonymously
(MissingAuthenticationToken). Inject the IRSA env only when a service-account
role ARN is staged; otherwise omit it so the default chain falls back to the
node instance-profile credentials served over IMDS.
- Authorization: the node role lacked the ec2/elbv2 actions the controller
needs. The eks-https-ingress workbook now attaches an AWSLoadBalancerController
managed policy to the node role (CreatePolicy + AttachRolePolicy).
* fix: add force_delete to EKS workbook demo ECR repos
tofu destroy of an EKS workbook left the demo ECR repository behind: it
still holds the pushed demo image, so DeleteRepository (force=false)
returns RepositoryNotEmptyException. Add force_delete = true to each
workbook's aws_ecr_repository.demo so teardown removes the repo with its
images.
* fix: force-delete EKS control-plane ENIs on teardown
TerminateK3sServerVM deleted the CP ENI with a plain force=false
DeleteNetworkInterface. eniIsLiveAttachment reports InUse whenever the
record's Status/InstanceId/AttachmentId are set, so when the K3s VM is
gone but the ENI record's attachment fields were never cleared the delete
returned InvalidNetworkInterface.InUse permanently and EKSDeletingReaper
re-drove the same non-idempotent call every 90s, wedging the cluster in
DELETING.
Teardown owns its CP ENIs and has already terminated the VM, so the
attachment is authoritatively dead. Replace the InUse-retry budget loop
with detach-then-delete (detachAndDeleteServerENI): DetachENI clears the
stale attachment fields, then DeleteNetworkInterface passes the in-use
guard. Both calls tolerate an already-gone ENI (NotFound) so a race with
the async instance-terminate cascade resolves to idempotent success.
purgeClusterInfra's private-endpoint ENI path reuses the same helper.
* fix: detach+delete worker ENIs on EKS nodegroup teardown
A terminated nodegroup worker could leave its primary ENI in
spinifex-vpc-enis as in-use/attached, and a dangling ENI throws
DependencyViolation on subnet/VPC delete, blocking tofu destroy. Two
gaps:
TerminateWorkerInstances did a local-only vmMgr.Get and silently skipped
any worker owned by another node, stranding both the VM and its ENI on
multi-node clusters. Route the terminate per-instance via ec2.cmd.<id>
(mirroring the gateway TerminateInstances path) so the owning daemon runs
the full teardown — detach + force-delete the primary ENI and clear its
record. No responder / NotFound payload is treated as already-gone so a
retried DeleteNodegroup stays idempotent.
deleteInstanceENI (stopped-instance terminate) issued a force=false
DeleteNetworkInterface with no prior detach: a stale in-use attachment
made it fail InvalidNetworkInterface.InUse, leaving the ENI record behind
after the instance was already written to the terminated bucket. Detach
first, then delete, tolerating NotFound.
* fix: heal volume State drift on detach/terminate teardown
A detach/terminate could leave a volume's State empty instead of
'available'. DeleteVolume gated on State=='available' exactly, so it
returned VolumeInUse for an unattached volume nothing was using, leaving
it undeletable and blocking stack teardown. DescribeVolumes cosmetically
rendered an empty State as 'available', masking the drift.
- DeleteVolume now treats an empty State with no attachment as deletable
(an attached volume still returns VolumeInUse).
- DescribeVolumes derives an empty State from the attachment (attached ->
in-use, unattached -> available) instead of blindly rendering
available, so an empty-but-attached volume is no longer hidden.
- UpdateVolumeState normalizes an unattached volume with an empty state to
available, so a detach writeback that omits the state cannot strand the
volume in drift.
* fix: break all SG cross-references on EKS teardown
DeleteClusterSGs broke the cp<->nodegroup cycle too narrowly. It revoked
only ingress (IpPermissions), never egress (IpPermissionsEgress), so a
cross-reference via an egress rule kept the SG pinned on
DependencyViolation. It also resolved only the two named cluster SGs, so
any OTHER SG in the VPC referencing them — the default SG, the LBC/ALB SG,
the private-endpoint SG, user/TF SGs — was never revoked and pinned the
referenced SG on delete, leaving the VPC stuck.
Enumerate every non-default SG in the VPC and revoke BOTH ingress and
egress on each before deleting, breaking any cycle order-independently,
then delete only the cluster-owned SGs (referrer SGs are deleted by their
own teardown). The default SG is left untouched. Since DeleteClusterSGs
runs against both the customer VPC and the managed control-plane VPC, the
broadened sweep covers both teardown paths.
* feat: support TargetGroup ProtocolVersion in elbv2
CreateTargetGroup now stores ProtocolVersion (defaulting HTTP/HTTPS target
groups to HTTP1) and DescribeTargetGroups/Create output return it. Without
this the aws-load-balancer-controller sees a perpetual immutable-field
mismatch (desired HTTP1 vs empty) and recreates the target group every
reconcile, looping on DuplicateTargetGroupName once a shared ALB IngressGroup
reconciles more than one target group. NLB protocols (TCP/UDP/TLS) keep it
omitted to match AWS.
* fix: omit IRSA env from ebs-csi addon when no role staged
The ebs-csi controller manifest hardcoded AWS_ROLE_ARN={{SERVICE_ACCOUNT_ROLE_ARN}}
plus the web-identity token volume. With no service-account role staged the
placeholder rendered empty, half-arming the SDK web-identity provider, which
panics 'role ARN is not set' and CrashLoops the controller, leaving PVCs
Pending. Convert to the conditional {{IRSA_ENV}}/{{IRSA_VOLUME_MOUNT}}/{{IRSA_VOLUME}}
markers like the LBC bundle so the IRSA env and token volume are omitted when
no role is staged, falling back to node instance-profile credentials over IMDS.
The EBS-specific AWS_EC2_ENDPOINT/AWS_ENDPOINT_URL_EC2 stay in both modes.
Requires an eks-node AMI rebake to take effect.
* docs: route gitops-argocd workbook through a shared ALB and expose ArgoCD UI
Fold the demo app and ArgoCD ingresses onto one ALB via an LBC IngressGroup
with host routing (app./argocd. on a wildcard cert) instead of one ALB per
ingress, add a NodePort + HTTPS Ingress for the ArgoCD UI, and document the
access steps. Add the node-role LBC and EBS-CSI IAM policies the controllers
need (Spinifex wires controller creds at the node level, not IRSA) and an
ignore_changes block for the cluster's access_config and
vpc_config security_group_ids, which Spinifex DescribeCluster does not echo
back, so the provider stops trying to replace the cluster on every plan.
* fix: stop addon-sync substituting IRSA markers named in comments
The ebs-csi controller manifest's header comment spelled out the literal
{{IRSA_ENV}} / {{IRSA_VOLUME_MOUNT}} / {{IRSA_VOLUME}} marker tokens. addon-sync
matched each marker by substring, so the comment lines were replaced with the
env/mount blocks, injecting a bare YAML sequence between two documents. K3s'
auto-deploy then rejected the whole file (ParseManifestFailed: cannot unmarshal
array into unstructured), so the ebs-csi Addon CR never applied and the EKS
addon hung in CREATING. Reword the comment to not contain the literal tokens,
and anchor the marker substitution to lines that are exactly the marker
(whitespace aside) so a future comment mentioning a marker can't retrigger it.
* fix: disable K3s local-storage on EKS clusters in parity mode
In AWS LB Controller parity mode (BuiltinIngress=false) the K3s server
disabled traefik and servicelb but left local-storage enabled. Its local-path
provisioner ships a StorageClass marked default, which races the EBS CSI
ebs-gp3 default StorageClass — two defaults, so dynamic PVCs bind
nondeterministically. EKS has no local-path, so disable local-storage too and
let ebs-gp3 be the sole default. The built-in-ingress path is unchanged.
* fix: re-encrypt HTTPS target groups in haproxy ALB backends
An ALB target group with backend-protocol HTTPS (e.g. argocd-server, which
serves TLS on its own port) rendered a plaintext haproxy server line. HAProxy's
own check then spoke HTTP to a TLS port, failed, and marked the server DOWN,
returning 503 — even though the lb-agent's separate HTTPS health probe reported
the target healthy, so describe-target-health masked the fault.
Emit check-ssl ssl verify none on the server line for HTTPS target groups so
both the check and proxied traffic re-encrypt to the backend.
* fix: reconnect wedged QMP client on next command
A timed-out QMP decode under host contention left the cached client's
shared json.Decoder mid-message, wedging every later command and breaking
EBS AttachVolume/DetachVolume for the VM's lifetime. Mark the client Dead
on encode/decode error and redial the retained socket path (re-running the
qmp_capabilities handshake in place) on the next send.
* fix: round-trip security-group rule descriptions
SG ingress/egress rules dropped the per-rule Description on store and
describe. The AWS Load Balancer Controller tags the worker-node SG rules it
manages with a UserIdGroupPair description and identifies them by that value
to revoke them on teardown. Without the round-trip the controller cannot
match its rules, never revokes them, and the backend security group stays
referenced — DeleteSecurityGroup returns DependencyViolation forever,
hanging the ingress finalizer and tofu destroy with orphaned security groups.
Persist Description on SGRule (excluded from sgRuleKey so it is metadata, not
identity) and render it back through describe.
* fix: reclaim customer-VPC nodegroup SGs on managed-CP-VPC teardown
In the managed control-plane VPC topology, launchNodegroupInfra creates the
cluster control-plane and nodegroup security groups in the customer VPC for
worker<->control-plane networking, but purgeClusterInfra only reclaimed the
security groups in the managed CP VPC. The customer-VPC SGs orphaned,
cross-referenced each other, and pinned the customer VPC with
DependencyViolation, hanging tofu destroy of the VPC. Reclaim them in the
managed-CP-VPC branch too, matching the legacy customer-VPC branch.
* fix: reclaim ALB EIP when system VM already gone on terminate
TerminateSystemInstance only released an internet-facing ALB's Elastic IP on
the local path, where the VM is still present in the manager. When the VM was
already gone (health-reaped, crashed, or raced by ENI teardown), it took the
remote/no-owner path and returned idempotent success without reconciling the
EIP, leaking the wan-pool address still associated to a deleted ENI.
Add EIPServiceImpl.ReleaseAddressByInstanceID, an idempotent account-agnostic
scan that disassociates then releases any EIP recorded against an instance, and
call it as a backstop in TerminateSystemInstance for both branches.
* fix: cascade-prune demo PVC via Argo CD finalizer in eks-gitops workbook
The demo Application carried no resources finalizer, so tofu destroy removed
the Application CR without pruning the synced PVC. The PVC survived, the cluster
was destroyed, and the Delete-reclaim PV's EBS volume orphaned. Add the
resources-finalizer.argocd.argoproj.io finalizer so deleting the Application
cascades to the PVC and ebs-csi reaps the volume before cluster teardown.
* feat: raw-IP access + documented Argo CD creds in eks-gitops workbook
The shared ALB host-routed everything, so the raw ALB IP 404'd in a browser
without an /etc/hosts entry. Make the app the hostless catch-all on :443 and add
a hostless Argo CD listener on :8443, so https://<alb-ip>/ serves the app and
https://<alb-ip>:8443/ serves the UI with no DNS. Surface the admin-password
command as a tofu output and document the credential + IP URLs in the README.
* fix: reclaim ALB EIP on the owning-node terminate path
The EIP backstop lived only in TerminateSystemInstance, but the ALB
delete path goes serveSystemTerminateInstance -> terminateSystemInstanceLocal
directly, bypassing it, and releaseSystemInstanceEIP relied on the VM's
cached allocation which is often empty. Extract reclaimSystemInstanceEIP
(authoritative KV reconcile via ReleaseAddressByInstanceID) and call it
from terminateSystemInstanceLocal as well as the no-owner backstop, so an
internet-facing ALB's EIP is released on every terminate route.
* chore(eks): drop coredns from the managed addon catalog
Cluster DNS ships as the baked node-local coredns-mulga DaemonSet, not as
a managed addon — there is no bundled coredns manifest, so CreateAddon
coredns would stage but fail VM-side render. Remove the phantom catalog
entry so DescribeAddonVersions and CreateAddon no longer advertise it;
repoint the addon tests that used coredns as their sample to argocd.
* feat(ui): group EKS and ECR under a Containers nav section
Fold the separate EKS and ECR sidebar groups into one Containers group
with EKS (clusters) and ECR (repositories) entries.
* fix(ui): satisfy strict null checks in ECR component tests
Index mock.calls via optional chaining and narrow the getAllByRole result
before clicking, clearing the TS2532/TS2345 errors that failed pnpm fix.
* refactor(eks): hide internal fixture addons from the public catalog
Add an AddonSpec.Hidden flag and mark spinifex-noop hidden: it stays
creatable (lookupAddon finds it, so the delivery-transport e2e still drives
it) but no longer surfaces in the unfiltered DescribeAddonVersions listing.
* refactor(eks): remove K3s built-in ingress; LBC-only
Drop the BuiltinIngress option and its managed-ingress tag opt-in. traefik,
servicelb, and local-storage are now always disabled on EKS nodes (AWS
parity — Service type=LoadBalancer and Ingress are the Load Balancer
Controller's job). Removes the EKS_DEFER_TRAEFIK userdata flag, the k3s.initd
traefik .skip staging, and the maybe_enable_traefik deferred-enable loop in
the state reporter.
* fix(ui): clear lint debt in VPC-wizard mutations and CIDR validation
Parallelize the independent subnet-create and route-table-association loops
in the create-VPC mutation with Promise.all (each task records its resource
in the rollback list before any further call), and switch the CIDR-validation
regex to named capture groups. Clears the no-await-in-loop and
prefer-named-capture-group lint errors.
* fix: carry gateway port in ECR registry endpoints; rename mulga.internal -> spinifex.internal
The ECR registry is served on the gateway port (:9999), but proxyEndpoint and
repositoryUri were emitted port-less, so docker login/tag/push dialed :443 and
failed. Derive the port from the awsgw listen host and append it to the registry
host (omitted for 443). Also rename the default internal DNS suffix.
* docs: drop verbose ECR :9999 host note
* docs: fix literal-asterisk emphasis (single-* not rendered)
* docs: brace-wrap ${REGISTRY}:latest (zsh :l modifier ate the tag); document Docker CA trust
* feat: default ECR registry URIs to the gateway host (no-DNS interim)
The registry authenticates by token, not hostname, so the per-account
<acct>.dkr.ecr name is cosmetic. Advertise the gateway's reachable bind host:port
(already a cert SAN) in repositoryUri/proxyEndpoint so docker login/tag/push need
no DNS; the parity host still works server-side where DNS exists.
* fix: serve ECR registry on a DNS-free gateway host end to end
Advertise the gateway's AdvertiseIP as the ECR registry host when the AWSGW
bind is unspecified (0.0.0.0/::), so repository_url resolves to a reachable
host:9999 carried in the server cert SANs rather than the unresolvable
per-account parity name. Docker push then dials it directly with no DNS.
Mirror the same host on EKS workers: the registries.yaml mirror keys and the
credential provider matchImages now cover the port-less parity name, the
port-ful parity name, and the gateway IP:9999, all redirecting to the dialed
gateway endpoint. A port-ful pull from the API-returned repository_url matches
the mirror instead of bypassing it into a failed DNS lookup.
Net: docker push host, pod image host, and the API's repository_url are the
same value, with no DNS or /etc/hosts.
* docs: resolve eks-https Ingress ALB DNS name to its public IP (no DNS)
* docs: resolve eks-gitops Ingress ALB DNS name to its public IP (no DNS)
* docs: remind to run aws eks update-kubeconfig before kubectl in EKS workbooks
|
||
|
Julian Sommer
|
35eaca5dc4 | fix: add detailed logging to e2e | ||
|
Josh Siviour
|
f9858d4e5d |
test(e2e): ECR end-to-end suite (control plane + docker/crane/skopeo) (#398)
* test(e2e): add ECR end-to-end suite (control plane + docker/crane/skopeo) New tests/e2e/ecr/ suite plus harness support: - harness: ECR SDK client, control-plane helpers (repo CRUD, get-login-password, describe-images), and docker/crane/skopeo CLI wrappers that skip when the binary or registry-host resolution is absent. - suite: control-plane CRUD + policy + lifecycle round-trip; docker login/push/ pull; crane append/pull and skopeo copy exercising the Bearer /v2/token flow. - registered e2e-ecr in the Makefile + service manifest. Predastore capacity/load leg is a skipped placeholder pending mulga-siv-359/356. * test(e2e): carry awsgw port in ECR registry host for dev clusters Dev clusters bind awsgw on a non-standard port (e.g. 9999); production uses :443. ECRRegistryHost now appends SPINIFEX_ECR_PORT when set so docker/crane/ skopeo address the right endpoint, and RequireRegistryResolves strips the port before DNS lookup. |
||
|
Julian Sommer
|
eced3f733a | feat: split IAM e2e (#372) | ||
|
Julian Sommer
|
2e9501524b | feat(e2e): more e2e coverage (#365) | ||
|
Julian Sommer
|
a57ebd0ad9 | chore: remove references to pseudo multi node | ||
|
Julian Sommer
|
50b5495d26 | chore: more comment cleanup | ||
|
Julian Sommer
|
58842e5e8c | chore: fix stale comments | ||
|
Josh Siviour
|
d076a434d4 |
Feat/e2e targeted suites (#352)
* test(e2e): add targeted suite selector + shadow-mode CI step
select-suites maps a diff to the e2e suites it must run: changed files →
services (manifest path/additional_paths) → consumer closure over
depends_on vs publishes/subscribes → suites whose covers intersect.
Special cases force-all (infra/harness/workflow, ≥3 services, submodule
bumps) or a lone suite dir; empty diffs fall back to default suites. An
AST scan of each suite's harness.Ensure* call graph derives per-test
service coverage and emits an optional -test.run subset (RUN_PATTERN).
Wired into e2e.yml as a non-gating 'Select Suites (shadow)' job that
logs the computed selection to the run summary so predicted vs actual
can be compared before the selector drives SUITES.
* ci(e2e): add dispatch-only per-suite job blocks grouped by env
Restructure the looped e2e flow into env-grouped provision -> matrix
suites -> teardown blocks so each suite surfaces as its own node in the
Actions graph instead of a single green tick:
single_provision -> single_suite [single,cert,lb,eks] -> single_teardown
multi_provision -> multi_suite [multinode] -> multi_teardown
Provision resolves the VM/cluster and ships test binaries, emitting WAN
IP + ssh key path as job outputs; each matrix leg runs one suite over
SSH and uploads its own junit/analysis artifacts; teardown (if:always)
reuses the persisted tofu workspace on the same runner to destroy.
workflow_dispatch only -- runs alongside the gating e2e.yml for
validation and posts no commit status.
* test(e2e): add manifest drift lint (fixture-create + NATS subject)
Bead 5 of the targeted-suite-selection plan. Two ratcheted drift guards in
tests/e2e/manifest-lint, wired into make preflight and the spinifex.yml PR job:
- Fixture lint: AST-flags direct resource-create AWS calls
(c.EC2.RunInstances, c.ELBv2.CreateLoadBalancer, ...) in suite test files,
steering them through harness.Ensure* fixtures. ~104 pre-existing call sites
are captured in a checked-in baseline; the lint fails only on NEW creates.
Intentional create-path tests opt out with an inline // e2e:allow-create.
- Subject lint: extracts NATS subject literals from the natsSub{} registry and
literal Subscribe/Publish/Request args, cross-referenced wildcard-aware
against service-interfaces.yaml. Code subjects missing from the manifest fail
(ratcheted); manifest subjects with no static reference warn only (many are
produced dynamically). Fixed real drift surfaced on first run: declared the
five spinifex.cluster.shutdown.* phase subjects under spinifex_daemon.
manifest-check is now CI-enforced alongside manifest-lint (previously
preflight/local-only).
* feat: run-scoped e2e teardown sweep
Tag every Ensure* fixture resource with e2e:run=<run-id> when
SPINIFEX_E2E_RUN_ID is set, and add a teardown.test suite that sweeps
everything carrying that tag at end of run — reclaiming resources leaked
by a crashed suite, an interrupted run, or a persistent cluster.
- harness/sweep.go: tagRunResources (EC2 CreateTags) + tagRunELB (ELBv2
AddTags) + SweepRunResources in dependency order (LB, instances, NAT,
snapshots, volumes, images, SGs, subnets, key pairs). Blank run id
no-ops both tagging and sweeping, so the sweep can never touch an
untagged or foreign resource.
- harness/fixtures.go: stamp the run tag on each created resource.
- tests/e2e/teardown: thin suite that runs the sweep; skips without a
cluster or run id, logs the report, never fails the run.
- e2e-suites.yml: build + ship teardown.test, pass the run id into suite
legs, sweep on the VM in both teardown jobs before tofu destroy.
|
||
|
Josh Siviour
|
527308c342 |
fix(baremetal): empty modules.dep + capacity-aware single-node e2e (#305)
* feat(elbv2): localize internal-LB heartbeat failures for baremetal debug Add diagnostics so a stuck-in-provisioning internal LB can be pinned to one of three points on the heartbeat path: - lb-agent failure log now carries the gateway target + region, so the microVM serial console shows whether the heartbeat hit a transport error (never reached AWSGW) or an HTTP-level rejection. - AWSGW LBAgentHeartbeat logs receipt (debug) and warns on the previously-silent not-found/account-mismatch reject path, so the journal distinguishes 'heartbeat arrived but cannot transition' from 'heartbeat never arrived'. * test(e2e/lb): fail fast on stuck internal LB + probe fw_cfg on microvm boot - lb suite: gate the remaining internal subtests on Internal_ALB. The internal LBs share one mgmt-return datapath and fixture, so if the first never reaches active the rest time out identically — skip them instead of burning ~5m per subtest (~20m saved on a known-bad run). - microvm init.sh: widen the fw_cfg netcfg poll window and, on the not-available path, dump DMI / loaded modules / qemu_fw_cfg by_name listing / dmesg fw_cfg to the serial console before init exits, so a boot panic is diagnosable from the captured console log. * fix(microvm): insmod fallback for fw_cfg + fail build on bad modules.dep Baremetal-built microVM images shipped an unusable modules.dep (the build host's depmod errors were swallowed), so busybox modprobe in the guest init silently no-oped, qemu_fw_cfg never loaded, /sys/firmware/qemu_fw_cfg was absent, init could not read opt/spinifex/netcfg, and the LB microVM panicked before lb-agent ran — leaving internal LBs stuck in provisioning. init.sh: load_mod() tries modprobe, then falls back to insmod by explicit path (.ko/.ko.gz) which needs no modules.dep, so the guest boots regardless of which host built the image. build-microvm-image.sh: require depmod, drop the error swallow, and assert modules.dep is non-empty after depmod so a boot-broken image fails the build loudly instead of silently. * fix(microvm): decompress kernel modules before depmod Debian trixie's kmod 34 depmod silently emits an empty modules.dep when fed Alpine's gzip-compressed (.ko.gz) modules — reproduced: 928 modules in, 0-byte modules.dep out. The guest's busybox modprobe then no-ops, qemu_fw_cfg never loads, and internal LB microVMs panic before lb-agent runs (stuck provisioning on bare metal; GitHub-hosted runners ship a kmod that reads .gz, so normal CI was unaffected). Decompress kept modules to plain .ko after the keep-list strip, before depmod. Host depmod then produces a usable map regardless of its gzip support, and the guest loads modules without a decompressor. * feat(e2e): capacity-aware scheduling for dense single-node runs Denominate daemon schedulable capacity in physical cores instead of logical threads, and auto-serialise e2e launches when the cluster is at capacity, so a single hyperthreaded node stops over-packing guests. Daemon: NewResourceManager sizes hostVCPU from physicalCoreCount() (distinct physical-id:core-id pairs in /proc/cpuinfo) rather than runtime.NumCPU(). Falls back to logical CPUs when topology is absent (non-Linux, container, ARM cpuinfo without core id). On a hyperthreaded box this halves the over-pack: with the unchanged 2 vCPU reserve the i5-12600H schedules 10 vCPU (12 cores - 2) instead of 14, keeping the boot-spike CPU within real cores. Harness: capacityRetryEC2 decorates the EC2 client and, on InsufficientInstanceCapacity, waits and retries RunInstances instead of failing — turning the daemon admission gate into back-pressure so concurrent subtests queue. AWSClient.EC2 is now the wrapped ec2iface.EC2API; EC2Conf keeps the raw *ec2.EC2 for .Config access. Adds unit tests for parsePhysicalCores (hyperthreaded/hybrid/dual-socket/ fallback) and the retry decorator (retry-then-succeed, non-capacity passthrough, deadline). * fix(daemon): SPINIFEX_HOST_VCPU override so small CI hosts can start Denominating capacity by physical cores starves tiny hosts: a 2-physical- core CI runner leaves 0 schedulable after the default 2-vCPU reserve, so NewResourceManager refuses to start and every daemon-constructing unit test fails. The previous runtime.NumCPU() count (4 logical on the same runner) incidentally cleared the reserve floor. Add a SPINIFEX_HOST_VCPU escape hatch (symmetric with the existing SPINIFEX_RESERVED_* overrides) that pins the detected core count for hosts whose /proc/cpuinfo topology misreports, and pin it to 4 in the daemon TestMain so unit tests are deterministic regardless of runner topology. Reserve stays at the default 2. |
||
|
Josh Siviour
|
496424c41c |
test(eks): EKS control-plane E2E suite (Sprint 6g) (#304)
* test(eks): EKS control-plane e2e suite (Phase 1, API-level)
Add tests/e2e/eks/eks_test.go driving the EKS lifecycle against awsgw:
CreateCluster -> ACTIVE (endpoint + CA asserted), kubeconfig artifact
assembly, AccessEntry CRUD, get-token presign decode, DeleteCluster -> gone.
Harness: EKS SDK client on AWSClient + WaitForEKSCluster{Active,Deleted}
pollers. Wire e2e-eks into the Makefile and the single-node CI suite list.
* test(eks): Phase 2 kubectl get-nodes data-plane gate
Add the reachability shim (harness/eks_mgmt.go) that reads the control-plane
VM's br-mgmt IP from the cluster KV meta over NATS, plus a kubectl wrapper
(harness/kubectl.go) that skips when kubectl is absent. KubectlGetNodes points
kubectl at https://<mgmtIP>:6443 (insecure-skip-tls-verify; cert SANs the NLB
DNS, not the mgmt IP) with an aws eks get-token exec block and polls until the
control-plane node is Ready — the get-token webhook auth regression gate.
IRSA pod + the real NLB/Route53 passthrough are deferred to a follow-up.
* test(eks): tolerate doubled NotFound code + dial loopback NATS
DeleteCluster detection matched the SDK constant ResourceNotFoundException,
but awsgw emits ResourceNotFoundExceptionException on the wire — match the
NotFound code by substring so deletion is detected immediately instead of
timing out. The mgmt-IP shim dialed NATS.Host verbatim (0.0.0.0:4222), which
the serving cert does not SAN; rewrite the wildcard bind to loopback.
Validated live: all 6 subtests green, kubectl get nodes shows the
control-plane node Ready via the get-token webhook auth path.
* feat: build system images with libguestfs (no host block devices)
Replace the qemu-nbd + sudo mount + chroot + /dev-bind flow in
build-system-image.sh with libguestfs (virt-customize / virt-resize /
guestfish). Every operation runs in an isolated userspace appliance VM with
its own kernel, so the build touches no host block device, no host mount, and
needs no sudo — removing the failure class that wiped the host's /dev on shared
CI runners (a leaked /dev bind traversed by rm -rf).
Applies to all distros: alpine resizes via guestfish e2fsck+resize2fs, ubuntu
via virt-resize; customization (packages, binaries, files, setup script,
service enable, cache cleanup) is one ordered virt-customize invocation.
LIBGUESTFS_BACKEND=direct (no libvirt on runners).
Wire the eks-node AMI into the single-node e2e job: the runner builds the
device-free raw, ships it to the VM, and the VM imports it (predastore/NATS are
VM-only) so the eks suite's CreateCluster has an AMI to boot.
* feat(eks): bootstrap + state-report via AWS gateway broker
Converge the EKS control-plane → host channel onto the ELBv2 lb-agent model:
the K3s server VM publishes its bootstrap envelopes and periodic state reports
via SigV4-signed HTTPS POST to the AWS gateway, instead of dialing core NATS
directly. A new gateway action (PublishInternal, POST
/clusters/{name}/internal-publish) relays the payload verbatim onto the
existing eks.bus.* / eks.state.* subjects, so the daemon-side subscriber, KV
persistence/encryption, and reconciler are unchanged.
This removes the VM's need to reach NATS at all, so NATS can stay
cluster-internal behind its bind/firewall/mTLS controls — the prior direct
path broke when NATS was not VM-reachable (e2e CreateCluster timeout) and was
DDIL-fragile (fire-and-forget nats pub, no ack/retry).
- gateway/eks: PublishInternal broker + route; closed-set channel/kind validation
- cmd/eks-gateway-publish: one-shot SigV4 publisher (retry-until-ack) baked into
the eks-node AMI; replaces the nats-cli publisher in k3s-first-boot.sh and
mulga-eks-state-report.sh
- handlers/eks + daemon: hand the K3s server VM the mgmt-reachable gateway URL +
system (Predastore) SigV4 creds + gateway CA instead of NATS URL/token/CA;
new resolveSystemGatewayBaseURL (mgmt-bridge-first)
- eks-node image: build/install eks-gateway-publish, drop nats-cli download
* feat: migrate eks-token-webhook to the AWS gateway broker
The TokenReview webhook dialed core NATS directly (STS verify + AccessEntry
KV read). On a mgmt-only control-plane VM with NATS bound off-subnet that
fails, so the webhook exited at startup, the apiserver token-webhook
kubeconfig was never written, and the apiserver crash-looped — the cluster
never reached ACTIVE.
Converge it onto the same gateway-broker model as bootstrap/state-report and
ELBv2's lb-agent: the webhook SigV4-signs an HTTPS POST {accountId,token} to
/clusters/{name}/token-review, and the gateway runs the verify + lookup
host-side and returns the resolved identity. The VM now speaks no core NATS.
- internal/eksgw: shared on-VM SigV4 client (also adopted by
eks-gateway-publish).
- handlers/eks/token_review.go: Authenticate decision core (moved from the
webhook binary) + ResolveTokenReview host-side wiring.
- gateway/eks token-review route + WebhookTokenReview handler.
- webhook: drop NATS, relay via eksgw.Client; broker fault -> 503 (retryable)
not a silent deny.
- initd: export EKS_GATEWAY_* / EKS_ACCESS_* creds, not SPINIFEX_NATS_*.
* fix: build eks-node helpers with GOFIPS140; cover token-review broker
eks-gateway-publish blank-imports internal/fipsboot, whose init() panics
unless the binary is built with GOFIPS140=v1.0.0. The eks-node AMI build
omitted the flag, so the binary paniced at first boot right after k3s came
up — k3s-first-boot (set -eu) died before publishing the bootstrap token and
the cluster never reached ACTIVE. Build both eks-node helpers with
GOFIPS140=v1.0.0, matching cmd/lb-agent.
Add NATS-backed unit tests for ResolveTokenReview and the WebhookTokenReview
gateway handler (verify responder + account KV) to cover the new broker path.
* fix: export first-boot env so eks-gateway-publish child sees it
k3s-first-boot.sh and mulga-eks-state-report.sh sourced /etc/spinifex-eks/
first-boot.env but never exported the vars, so the eks-gateway-publish child
process inherited an empty environment and exited '--account-id is required'.
The control-plane VM came up healthy but never published its bootstrap
envelopes, so the cluster never reached ACTIVE. Wrap the source in set -a /
set +a so the KEY=value lines export to child processes.
* fix: make awsgw start --host override actually bind
The 'awsgw start --host' override printed 'Overwriting awsgw host' but the
assignment was commented out, so AWSGW always bound the spinifex.toml host
(a specific WAN IP, e.g. 192.168.0.10). A system instance (EKS K3s control
plane, internal LB agent) has a mgmt-only NIC on-link to the br-mgmt IP with
no route to the WAN IP, so its SigV4 POSTs to the gateway were refused and the
cluster never bootstrapped. Honour --host (e2e passes 0.0.0.0:9999) so AWSGW
listens on all interfaces incl. br-mgmt; the serving cert already SANs every
local interface IP, and WAN clients still reach it.
* test(eks): install kubectl on e2e VM so KubectlGetNodes runs
The eks data-plane subtest (TestEKS/KubectlGetNodes) drives the full
aws eks get-token -> kubectl -> apiserver -> token-webhook -> gateway broker
-> STS verify path — the only end-to-end exercise of the token-review broker.
The e2e binaries run on the VM, where kubectl was absent, so
harness.NewKubectl t.Skip'd it and the path went unvalidated. Install a
checksum-verified kubectl (pinned to the k3s server version) on the VM,
gated on e2e-eks.
|
||
|
joshsiv-mulga
|
8e38faaede |
fix(elbv2): make NLB nginx health-check pathway robust in CI
E2E NLB suites timed out at "0/2 healthy" while ALB suites on the same target instances went healthy in ~5s. The host daemon journal shows the NLB agent reporting an empty server list (no probe results at all), which happens when the lb-agent never enters nginx mode — i.e. `nginx -t`/start fails closed inside the LB microVM, so the agent never probes and reports nothing. The data plane itself is verified working; this is purely the active-health-check pathway failing to converge in CI. - lbagent: pre-create nginx runtime prefix dirs (pid dir + /var/lib/nginx, /var/lib/nginx/tmp, /var/log/nginx) before `nginx -t`, mirroring reloadHAProxy's socket-dir pre-create. A stripped Alpine initramfs may lack these, dead-ending the whole NLB health path. - build-microvm-image.sh: assert the nginx binary and ngx_stream_module.so are present in the image and fail the build loudly, instead of surfacing as an opaque e2e health timeout. - e2e: capture the LB VM serial console to the artifact bundle on NLB health-wait failure. The agent's engine activation and any `reload nginx:` error land on the guest console, which the host journal never sees. |
||
|
Josh Siviour
|
554c5d96c7 |
feat(elbv2): NLB L4 data plane on nginx stream + UI parity (#295)
* feat(elbv2): NLB L4 data plane on nginx stream (mulga-siv-952) Network load balancers render an nginx `stream` config (TCP/UDP/TLS/ TCP_UDP) instead of HAProxy, which cannot load-balance UDP in any release. The gateway tags GetLBConfig with Engine=nginx; the LB agent dispatches to the nginx engine (config/pid/cert paths + reload) and skips HAProxy stats polling. ALB stays on HAProxy. nginx is added to the microvm image. * docs(elbv2): note NLB runs nginx stream, ALB runs HAProxy (mulga-siv-952) * fix(elbv2): load nginx stream module for NLB data plane Alpine's `nginx` apk is built without the stream module — it ships separately as `nginx-mod-stream`. Without it, the generated NLB config fails `nginx -t` with [emerg] unknown directive "stream", so the agent never applies it. Add the package to the microvm image and emit a `load_module .../ngx_stream_module.so;` directive at the top of the generated config. * fix(elbv2-ui): allow single-subnet LB + full NLB protocols in listener edit Create-LB form required min 2 subnets while the CLI/backend accept 1; relax to min(1) to match. Listener add/edit only offered HTTP/HTTPS — add the NLB protocol set (TCP, UDP, TLS, TCP_UDP), driven by LB type, with cert/ssl-policy fields gated on secure protocols (HTTPS/TLS). * feat(elbv2): active target health checks for nginx NLBs nginx stream has no active upstream probing, so NLB targets never advanced past initial — DescribeTargetHealth stayed initial forever and WaitForTargetsHealthy timed out for every NLB. GetLBConfig now delivers per-target HealthTarget specs (daemon-computed server name, probe address, protocol/path) for network LBs; the lb-agent probes each target every tick (TCP dial or HTTP/HTTPS GET) and reports UP/DOWN via the existing heartbeat path, so the daemon's threshold hysteresis advances targets to healthy. ALBs are unchanged (HAProxy stats). Adds an Internal_NLB_UDP e2e suite gating on WaitForTargetsHealthy plus a UDP datagram round-trip through the VIP. |
||
|
joshsiv-mulga
|
c9a4e904a8 |
test(e2e): fresh-install reachability baselines + drop qemu hostfwd fallback
Add baseline tests that confirm two fresh-install regressions the existing
suite masks (it authorizes tcp/22 on the default SG before every SSH probe):
- default SG default-deny gates external reach of instances in the
default subnet (SG, not routing)
- a newly-created public subnet never gets its OVN IGW egress LRP, so it
has no route to the VPC IGW despite MapPublicIpOnLaunch
Plus a positive test: instances sharing the default SG can communicate via
ICMP (same-host single-node, cross-host multinode).
Single-node baselines run after TestClusterStatsCLI (0-VM gate); multinode
after TestMultinodePreflight (fixture init). Instances are self-cleaning so
they don't perturb the singleton-VM ordering.
Remove the qemu hostfwd SSH fallback from the harness (InstancePublicSSHHost,
GuestSSHEndpoint) - it bypasses the OVN datapath and masks these regressions.
Endpoints now t.Fatal when no public IP is assigned.
|
||
|
Julian Sommer
|
ff0dc42562 | feat: IMDS subnet level (#292) | ||
|
Julian Sommer
|
bcb49cd771 | feat: IMDS v1 (#266) | ||
|
Julian Sommer
|
94aa482931 | feat: sts v1 (#261) |