* feat(network): add routed uplink mode, Routed wiring, and NAT egress rule helper
* feat(external): route gateway LRP over transit pool and install VPC SNAT in routed NAT mode
* feat(vpcd): support bridge_mode=nat (routed uplink, transit pool, egress rules)
* feat(daemon): register EIP handlers unconditionally with disabled-mode stub; seed default subnet per external mode
* feat(admin): support --external-mode=nat and suggest it for non-bridgeable uplinks
* feat(scripts): add --nat-uplink routed mode to setup-ovn.sh
* test(e2e): add routed-NAT single-node natuplink suite
Covers the external_mode=nat lane end to end on a nat-initialized node:
host transit wiring (veth, br-ext port, ip_forward, iptables egress
rules), spinifex.toml contents, disabled EIP surface (empty
describe-addresses, UnsupportedOperation on allocate), default subnet
MapPublicIpOnLaunch=false, OVN gateway LRP + VPC SNAT on the transit
/24, guest outbound egress proven via a serial-console probe (nat mode
has no inbound path), and unique transit gateway IPs across VPCs.
Suite self-gates on external_mode=nat; registered as e2e-natuplink and
in SUITES_BUILD so it compiles in CI. Manifest entry stays commented
until CI can provision a nat-mode environment.
* feat(ovn): Address_Set CRUD and NAT exempted_ext_ips column
Adds the exempted_ext_ips column (optional strong Address_Set ref) to the
nbdb NAT model, Address_Set ensure/get with wait-op create semantics, and an
in-place SetNATExemptedExtIPs update on the client interface, live client,
and mock. Test NB schema gains the column and covers insert-resolves-UUID,
converge, clear, and missing-NAT paths.
* feat(policy): exempt address set on routed SNAT/EIP rows
Adds WithSNATExemptSet so routed mode stamps exempted_ext_ips (the
spinifex_nat_exempt Address_Set: transit /24 plus operator extras) on IGW
snat and EIP dnat_and_snat rows, keeping VM replies to host-initiated flows
un-NATted. AddSNAT gains an idempotency guard keyed on (router, VPC CIDR)
with stale-IP replacement, and both AddSNAT and the AddEIP idempotent-skip
path patch the ref in place on pre-existing rows. The set is a singleton
strong ref and is never deleted. Non-routed modes are unchanged.
* feat(host): VPC ingress route primitives for routed-NAT mode
EnsureVPCIngressRoute / RemoveVPCIngressRoute manage the host route that
sends VPC-CIDR traffic into OVN via the gateway LRP transit IP on the
spx-nat veth. Replace/del semantics keep both idempotent; a missing route
on removal is not an error.
* feat(external): routed ingress leg on IGW attach/detach, reconcile-safe
AttachIGW's routed leg now also installs the host VPC ingress route via
RoutedIngressHooks, and re-runs on the already-attached path so the
reconcile loop restores host routes (and patches legacy SNAT exempt refs)
after a reboot — OVN state survives restarts but host routes do not.
DetachIGW removes the route alongside the SNAT. vpcd wires the hooks and
the spinifex_nat_exempt set (transit /24 + [network] nat_exempt_cidrs,
validated nat-mode-only) exclusively in routed-NAT mode; pool/veth/direct
pass nil hooks and are unchanged.
* test(natuplink): Tier 1 host-ingress phase; docs for jumpbox pattern
New Phase 7 asserts the automatic ingress tier: host route to the VPC CIDR
via the gateway LRP transit IP, exempted_ext_ips ref on the SNAT row
pointing at spinifex_nat_exempt (containing the transit /24), and — after
opening the SG from the transit net (default-closed, AWS parity) — ping and
an sshd TCP handshake against the instance private IP from the host, which
proves the un-SNATted return path. Phase 8 additionally waits for the
second VPC's ingress route to appear on IGW attach. vpc-networking README
documents the jumpbox pattern, SG note, and nat_exempt_cidrs.
* feat(config,admin): public wan pool alongside nat-transit
Restructure admin config generation from single-pool scalars to a Pools
slice so nat mode can emit both the transit pool and an optional public
wan pool. nat mode now accepts --external-pool/--external-source (plus
--external-bind-bridge/--gateway-ip when a public pool is requested),
validated by the shared resolvePublicPoolFlags helper also used by pool
mode. Transit pool always renders first so the IGW allocator picks it.
Formation wire format unchanged (nat mode is single-node only).
* feat(daemon): enable EIP service and auto-assign in nat mode with public pool
External IPAM (and with it the real EIP service, RunInstances public IP
auto-assign, and MapPublicIpOnLaunch on default subnets) now activates
whenever public pools exist: pool mode as before, plus nat mode when a
wan pool rides alongside the transit segment. The transit pool is
filtered out of IPAM — its addresses are gateway-LRP plumbing, never
allocatable EIPs. Transit-only nat configs keep the disabled EIP stub.
* feat(host): per-EIP ingress primitives for routed-NAT mode
DetectUplinkFor parses ip route get to find the interface and source IP
facing the pool gateway (re-run per ensure: WiFi/cellular uplinks move).
EnsureEIPIngress steers an EIP into OVN with a /32 route via the VPC
gateway LRP transit IP (src-hinted so host-local traffic still DNATs),
answers ARP for the EIP with a proxy neighbor entry (L3 only, same MAC,
WiFi-safe), sends gratuitous ARP, and adds per-EIP FORWARD accepts for
DROP-policy hosts. RemoveEIPIngress mirrors; missing state tolerated.
* feat(policy,vpcd): host EIP binder option on NATManager
WithHostEIPBinder injects routed-mode host plumbing hooks. AddEIP binds
after priming on both the fresh-add and idempotent-skip paths (host
routes and proxy-ARP are volatile even when the OVN row survives, so
reconcile re-ensures them after reboot); DeleteEIP unbinds best-effort.
The next hop comes from the new gatewayPortIP helper reading the gateway
LRP's stamped spinifex:gateway_ip (Networks fallback), with the ext-ID
key now an exported policy const shared with the external package.
vpcd selects the IGW pool by name instead of index — with two pools in
nat mode the gateway allocator must stay on the transit pool — and wires
the binder over host.EnsureEIPIngress/RemoveEIPIngress when a public
pool is present. EnsureEIPIngress gains an uplink hint so dhcp-sourced
pools (gateway unknown until lease) proxy-ARP on their bind bridge.
* feat(dhcp): interface-MAC lease variant with MAC-keyed-router detection
dhcp_mac = "derived" (default) | "interface" on external pools. The
interface variant leases with the bind interface's own MAC — WiFi/WWAN
uplinks drop frames with foreign source MACs, so derived chaddr MACs
never complete DORA there. Option 61 stays the lease discriminator.
UseIfaceMAC threads AllocateRequest → NATS wire → nclient4 → lease and
persists through KV so restart re-acquires repeat it.
Routers that key leases on MAC and ignore client-id would hand every
lease the same IP; the manager detects an ACK matching the interface's
own address or another client-id's live lease, releases the colliding
lease, and hard-errors advising a static range instead.
admin init auto-writes dhcp_mac="interface" for nat-mode public dhcp
pools bound to non-bridgeable uplinks (wlan/wwan/ppp).
* test(natuplink)+docs: Tier 2 EIP ingress e2e phases and public-pool docs
The natuplink suite now detects a public (non-transit) pool in spinifex.toml
and switches lanes: Tier-1-only configs keep the EIP-disabled and
no-public-IP assertions; public-pool configs assert the EIP surface is
enabled, the default subnet has MapPublicIpOnLaunch=true, instances
auto-assign public IPs, and a new Phase 9 exercises the full EIP ingress
lifecycle — host /32 route via the gateway LRP, proxy-ARP on the uplink,
per-EIP FORWARD accepts, exempt-stamped dnat_and_snat, TCP handshake to the
EIP, reconcile replay across a vpcd restart, and teardown on disassociate.
Docs: vpc-networking README gains a public-pool section for routed-NAT nodes
(init flags, dhcp_mac=interface behaviour, host-to-EIP caveat) and an updated
mode comparison; COMMANDS.md notes nat-mode EIP support behind a public pool.
* fix(setup): whitelist iptables, neigh sysctl, and arping for spinifex-vpcd
Routed-NAT mode shells out to iptables for the transit masquerade and
per-EIP FORWARD accepts, tunes proxy_delay, and sends gratuitous ARP for
host-delivered EIPs. Without these sudoers entries vpcd crash-loops with
"command not allowed" on nat-mode nodes.
* fix(ovn): scope DeleteStaticRoute prefix match to the target router
Every VPC router carries a 0.0.0.0/0 static route, so an unscoped cache
match could grab another router's row and fail with a referential
integrity violation, wedging IGW attach on multi-VPC nodes. Match only
rows referenced by the target router, mirroring FindStaticRoute. Mock
updated to the same semantics, with a regression test covering drift
replacement across two routers.
* fix(reconcile): always replay AttachIGW so host ingress state is re-ensured
applyIGWs skipped AttachIGW whenever the gateway switch port existed in
actual state, so the already-attached re-ensure path never ran and
routed-NAT host ingress routes lost on reboot were never reinstalled.
AttachIGW is idempotent; run it unconditionally.
* fix(vpcd): resolve duplicate-CIDR host ingress route collisions, bootstrap VPC wins
Every account's default VPC shares 172.31.0.0/16, so Tier-1 host routes
collide on the single host route table and the last IGW attach silently
stole the route (route replace). Pass vpcID and the gateway LRP IP
through RoutedIngressHooks; the bootstrap VPC always installs its route,
other VPCs only install when the CIDR is free and only remove a route
their own gateway IP holds. Adds host.VPCIngressRouteVia to read the
current route holder.
* ci(e2e): add nightly cell 19 for routed-NAT single-node suite
Cell 19 bootstraps with --external-mode=nat plus the CI static pool as
the public wan pool and runs the natuplink suite, covering the Tier-1
transit datapath and Tier-2 EIP ingress. The run step exits 0 when
natuplink.test is absent from the tests tar so scheduled runs against
branches predating the suite stay green.
* fix(admin): nat-mode init summary reflects configured public pool
The summary printed 'outbound-only — no public IPs/EIPs' even when
--external-pool/--external-source configured a public wan pool. Print
the pool range (or dhcp bind) and note EIPs are enabled.
* fix(eip,vpc): thread ctx through disabled EIP stub and NAT call sites
Reconcile the routed-NAT branch with dev's ctx-first service APIs after
rebase: DisabledEIPService and its tests take ctx to satisfy the EIPService
interface, the vm_adapters public-IP resolver asserts the ctx-signed
AssociatedPublicIPForInstance, and the default-subnet mapping test threads
ctx into DescribeSubnets.
* feat(otelsetup): OTel init, resource attrs, trace-stamping slog handler
Env-gated on OTEL_EXPORTER_OTLP_ENDPOINT: with no endpoint only the W3C
propagator is installed and globals stay no-op, so instrumented binaries
ship everywhere at zero cost. Resource carries service/host/mulga.env/
mulga.source plus OTEL_RESOURCE_ATTRIBUTES (ci.run_id in CI).
* feat(otelsetup): wire telemetry init into all spx services
Every spx service start command installs the trace-stamping JSON slog
default and the OTel providers via initTelemetry, flushed on shutdown.
Gateway's own slog setup now routes through otelsetup so its level
handling keeps trace correlation.
* feat(gateway): HTTP tracing middleware on awsgw and daemon cluster API
Server span per request with W3C traceparent extraction; awsgw spans are
renamed to the resolved SigV4 service.Action post-auth with account and
region attributes. Request log lines carry trace_id via context.
* feat(nats): propagate W3C trace context over command subjects
NATSRequestCtx injects traceparent beside X-Account-ID and opens a client
span per hop; ServeNATSRequest opens a consumer span joining the producer
trace, with a Ctx variant for handlers that thread context. RunInstances
is plumbed end-to-end (gateway dispatch through placement fan-out to the
daemon handler) and viperblockd ebs.mount/unmount join inbound traces.
* feat(systemd): source optional /etc/spinifex/telemetry.env in service units
Lets operators enable OTLP export (OTEL_EXPORTER_OTLP_ENDPOINT,
MULGA_ENV, MULGA_SOURCE) by dropping a single env file, with no unit
edits. File is optional; absent means telemetry stays disabled.
* feat(ci): export OTel telemetry from E2E envs to the central Elastic sink
All E2E workflows set SPINIFEX_OTLP_ENDPOINT (repo variable override,
default wattle) plus ci.run_id/ci.workflow resource attributes, so
bootstrap-install.sh writes telemetry.env on every node. Teardown runs
flush-telemetry.sh before the final tofu destroy so buffered spans and
metrics reach the sink.
* feat(otelsetup): request metrics and Go runtime metrics via OTLP
mulga.requests counter + mulga.request.duration histogram recorded by the
same middleware that opens spans: awsgw carries the resolved SigV4 action,
the daemon cluster API uses the chi route pattern, and NATS handlers record
per-topic at the subscribe chokepoints (node names stripped to keep
cardinality flat). Go runtime metrics start inside the same env gate.
* feat(daemon): deep spans for QMP commands, VM launch phases, EBS ops
Single chokepoint span per QMP command in sendQMPCommand covering all
callsites; vm.launch phase children (mount_volumes, start_qemu, qmp_connect,
persist_state); ec2.cmd consumer span with traceparent extraction plus
start/stop/reboot/terminate child ops; ebs.mount/unmount spans in
viperblockd with volume attributes.
* feat(telemetry): thread request context through NATS, object store and VM paths
Migrate utils.NATSRequest call sites to NATSRequestCtx (241 sites; W3C
traceparent now flows gateway -> daemon on every request), add GatherCtx and
migrate all Gather call sites, inject traceparent on manual EKS publishes.
ObjectStore interface is ctx-first with aws-sdk WithContext calls and an
otelhttp transport, so predastore spans join the caller trace. NATS consumer
spans record error status when the response envelope carries an error.
vm.Manager and the ec2 handler service interfaces take ctx-first so vm.launch
and QMP spans join the request trace; detached background work uses explicit
context.Background(). Hot-path slog calls use *Context variants for trace_id
binding.
* feat(telemetry): suppress health-check, heartbeat and unrooted trace noise
Health probes record metrics only (no span per poll); the QMP heartbeat
poller marks its context so query-status ticks stop rooting a trace each.
rootSampler honors MULGA_ROOT_TRACE_RATIO (ParentBased ratio, default 1.0)
and the predastore unit sets 0.05: guest block I/O roots are sampled while
request-linked spans are always kept.
* feat(otel): export deployment.environment resource attribute
Elastic APM maps it to service.environment, enabling the native environment
selector across the APM UI (Services, Traces, Dependencies).
* fix(telemetry): stop objectstore rooting method-only HTTP transactions
Background S3 calls (state sync, cleanup loops) carried no caller span, so
otelhttp rooted a trace per request and APM surfaced thousands of parentless
'HTTP GET/PUT/DELETE' transactions with expected-404 probes counted as
failures. Emit the client span only when the request context already carries
one, matching the viperblock backend. Bump viperblock/predastore to branch
heads so CI builds also pick up the equivalent span filter and root sampler.
* feat(telemetry): per-VM guest metrics via dedicated QMP socket + qmp-collector
Goanna Phase 1 producer, operator-consumed first. Each VM gets a second
-qmp chardev (qmp-telemetry-<id>.sock) plus a sidecar discovery file
carrying instance/account/vcpus/taps/monitoring-tier; the new
qmp-collector service polls query-cpus-fast (vCPU thread /proc jiffies),
query-blockstats, query-balloon and host tap sysfs counters, and
publishes CloudWatch-mappable goanna_ec2_* series to NATS
metrics.ec2.<instance-id>. A queue-group bridge in the same process
forwards the series to the node-local OTLP receiver so they reach the
operator sink until Goanna consumes the subjects. The collector never
touches the manager's control QMP socket; telemetry failures never
block a launch.
* fix(qmp-collector): dial NATS via DialTarget, drop ProtectProc, fix meta race
The collector connected to the raw NATS host (0.0.0.0), failing TLS
verification against a cert valid for 127.0.0.1; route through
admin.DialTarget like the other daemons.
ProtectProc=invisible hid the QEMU vCPU threads (dumpable=0) that the
collector must read from /proc/<tid>/stat, so every tick failed and
re-primed without ever publishing. Drop it to default.
Surface collect failures at Warn so silent metric loss is visible, drop
per-tick publish to Debug, and read InstanceID under the lock in run()
to fix a race with updateMeta on ENI hot-plug.
* chore(deps): re-pin predastore + viperblock to dev-landed commits
* feat(gpu): add H200/RTX Pro 6000 SE models and fix MIG host resource allocation
- Fix H100 SXM/PCIe device ID labels swapped in models.go (10de:2330=SXM, 10de:2331=PCIe)
- Add H200 SXM (10de:2335) to knownModels, computeModels, and migCapableModels
- Add NVIDIArtxPro6000BlackwellSE to definitions.go mapped to g7e family (matching AWS g7e instance type)
- Add MIGHostResources() policy table: 4 vCPUs / 32 GiB host RAM per compute slice, covering all known NVIDIA MIG profiles
- GenerateMIGTypes now emits non-zero vCPU/memory for EC2 instance type descriptors
* fix(daemon): enforce CPU/memory limits for MIG instance types
Whole-GPU passthrough remains bypass-only (gpuManager.Claim is the sole gate).
MIG types now fall through to canAllocateCount so host CPU and RAM are checked
before launch — prevents over-committing a host where one physical GPU backs
multiple concurrent slices, each with non-trivial vCPU/memory allocation.
* feat: Add snapshot image promotion flow
* fix: Small changes to viperblock/spinifex so snapshot captures delta properly and instances can boot from snapshot AMIs
* fix: test coverage and more consistent prefix check
* fixed testing
* more tests
* fix: added new graceful process killer in utils, bumped NATS timeout for testing
* fix: complete at-rest encryption launch + volume lifecycle (#361)
* chore: bump viperblock to encrypted-snapshot VolumeUUID nonce fix
Pull viperblock 1044c2a (feat/snapshot-uuid-nonce-fix) so E2E builds against
the fix for the encrypted AMI snapshot metadata tag-verify failure
(cipher: message authentication failed) on instance launch. Pairs with
viperblock PR #22.
* fix: forward viperblock master key to nbdkit mount path
viperblockd loaded the master key but never passed it to the nbdkit
plugin it spawns for volume mounts, so encrypted boot volumes opened
in cleartext and failed LoadState with an encryption-state mismatch.
Forward cfg.EncryptionKeyFile into NBDKitConfig and emit the plugin's
encryption_key_file= argument when set.
* chore: bump viperblock to fresh-volume VolumeUUID mint fix
* chore: bump viperblock to snapshot-link LoadState ordering fix
* fix: route encrypted-volume config writes through viperblock keyholder
config.json is a sealed VBState whose AES-GCM tag and StateSeqNum-derived
nonce can only be advanced by the master-key holder that owns the volume.
The EC2 volume handler wrote it directly to S3, so mergeVolumeConfig had to
refuse encrypted volumes (rewriting would strip the tag) — bricking
UpdateVolumeState (attach in-use / detach available) and ModifyVolume.
Route encrypted-volume config updates through viperblockd, mirroring the
ebs.snapshot idiom: per-volume ebs.config.{volumeID} hits the owning node's
live VB (the single StateSeqNum writer); on ErrNoResponders the ebs.config
queue group opens the detached volume exclusively and reseals. Cleartext
volumes keep the direct-S3 fast path. No crypto leaves viperblockd.
mulga-siv-323
* fix: unwrap encryption envelope when snapshot handler reads config.json
CreateSnapshot and snapshotInUseByVolumes decoded config.json straight into
a VBState. For encrypted volumes config.json is an at-rest envelope
{payload, authtag}; a raw decode yields a zero VBState (SizeGiB==0), so
CreateSnapshot 500s on the size guard and the in-use scan silently drops
encrypted volumes' snapshots. Unwrap via viperblock.StateBody first,
mirroring the volume handler's mergeVolumeConfig path.
mulga-siv-324
* test: cover viperblockd ebs.config handlers
Unit/integration coverage for applyConfigUpdate, makeConfigUpdateHandler
(ebs.config.{volumeID}), and the ebs.config queue-group fallback: grow-only
size reconcile, live-VB apply, invalid JSON, apply errors, and the
detached-volume open path. Clears the diff-coverage gate (68.8%).
* chore: pin viperblock to dev tip (#22 merged)
* fix(viperblockd): seal volume block-map to predastore on detach + durability e2es (#371)
* feat: cloud-init EC2 datasource (#411)
* feat: Add snapshot image promotion flow
* fix: Small changes to viperblock/spinifex so snapshot captures delta properly and instances can boot from snapshot AMIs
* fix: test coverage and more consistent prefix check
* merge changes
* chore: remove dead SnapshotSub field and SIGTERM snapshot remnants from viperblockd
SnapshotSub was added during the NATS/SIGTERM snapshot attempts but is never
set post-rebase. Removes the field from MountedVolume and the two nil-checked
unsubscribe blocks. Re-adds the nbd import which is still needed for NBDKitConfig.
* fix: post-rebase gofmt fixes and remove dead snapshot handler code
Split gofmt-squashed lines in go.mod, vm_adapters.go, nbd_test.go,
viperblockd.go, volumes.go, and volume_durability_test.go. Removes the
dead unix-socket snapshot handler tests from viperblockd_handlers_test.go.
* test: add viperblock snapshot S3 coverage tests
Exercises snapshotVolume, snapshotRunningVolume, and snapshotStoppedVolume
past the nil-config guard using an httptest server that returns 403.
The AWS SDK credential check fails synchronously without network I/O,
keeping the tests fast while covering the S3Config construction, master key
load, and viperblock.New code paths. Brings diff coverage from 45% to 69.9%.
* fix: cloneAMIToVolume reads config via format-agnostic path
LoadStateRequest expects a viperblock binary envelope (encrypted),
but CreateImageFromInstance writes the AMI config as plain JSON via
putAMIConfig. Replace LoadStateRequest with s.amiLoader.GetAMIConfig
which uses viperblock.StateBody to handle both formats, matching the
path used by ListImages and all other AMI readers.
* fix: pin viperblock to feat/snapshot-ami pseudo-version for LoadLiveCheckpoint
go.mod referenced v1.10.0 (released from dev) which pre-dates LoadLiveCheckpoint.
CI builds without go.work so it resolved to the published version and failed.
Pin to the snapshot-ami HEAD pseudo-version until the branch is merged and tagged.
* fix: replace indexOf with slices.Index, revert e2e runner and viperblock version
- nbd_test.go: remove local indexOf helper, use slices.Index from stdlib
- e2e-suites.yml: revert ubuntu-latest back to ubuntu-26.04 with correct formatting
- go.mod: revert viperblock back to v1.10.0 (will resolve once viperblock PR merges)
* fix: remove pseudo-version pin from go.sum
* feat: drain viperblock via snapshot socket before CreateSnapshot
Before LoadLiveCheckpoint(), dial {data_dir}/viperblock/{vol}/snapshot.sock
and wait for DrainToBackend() to complete (30s timeout). This ensures WAL
chunks and the live checkpoint are current in S3 before the snapshot VB
reads them. If the socket is absent the instance is stopped and Close()
already drained.
fix: socket path used s.config.WalDir which is empty in the daemon config;
changed to s.config.DataDir + "/viperblock" to match the path the NBD
plugin uses when creating the socket.
* feat: wire snapshot/AMI UI actions and add PromoteImage NATS endpoint
- Register as AMI from snapshot detail (RegisterImage with BDM pointing at snapshot)
- Deregister from image detail (DeregisterImage with navigate-away on success)
- Promote to System from image detail (admin-only, irreversible via UI)
- NATS subject spinifex.image.promote wired through gateway → daemon → existing admin.PromoteSystemImage
- signedFetch extended with optional params to support action-keyed extra fields
* refactor: address PR review on PromoteImage types and subscription ordering
- Merge PromoteImageInput/PromoteImageOutput into PromoteImageOpts/PromoteImageResult
(add JSON tags; drop the duplicate pair)
- Inline the input variable in gateway/spx/promote_image.go
- Move spinifex.image.promote subscription to the spinifex.* group in daemon.go
* test: cover snapshotVolume/Running/Stopped error paths for diff coverage
Add encryption-key-load-error and LoadState-failure tests for the three
new viperblock snapshot paths (snapshotVolume in snapshot service,
snapshotRunningVolume and snapshotStoppedVolume in image service).
Diff coverage: 58.8% → 65.5%.
---------
Co-authored-by: Josh Siviour <mrk@mulgadc.com>
Co-authored-by: Julian Sommer <115516918+juliansommer@users.noreply.github.com>
- RegisterTaskDefinition rejects container secrets[] (InvalidParameterException)
and warns on unsupported log drivers instead of silently dropping them.
- Capture logConfiguration; only host-side json-file is collected, other drivers
warn at register and reach the agent for parity. Document json-file retrieval.
- Plumb executionRoleArn taskdef -> assign -> agent; the agent assumes it to
authorize ECR pulls, falling back to the instance role when unset.
- Add deployment objects with a health-gated rolling update honoring
deploymentConfiguration minimumHealthyPercent/maximumPercent, plus a deployment
circuit breaker with optional rollback to the last-good task definition.
* feat: add OVSDB RAFT cluster primitives to setup-ovn.sh
Add --db-cluster-local-addr / --db-cluster-remote-addr flags so a
management node can run the OVN NB/SB databases as a native OVSDB RAFT
cluster instead of a single non-clustered ovn-central. When a local addr
is given, write a shared OVN_CTL_OPTS to /etc/default/ovn-central (NB
RAFT 6643 / SB RAFT 6644) and restart the per-DB units directly, since
the ovn-central aggregator is ExecStart=/bin/true and won't restart its
children. Empty remote addr creates the cluster (init node); a set remote
addr joins it. NB/SB client set-connection runs only on the create node
(RAFT replicates it cluster-wide).
The single-node --management path is unchanged when no cluster addrs are
supplied, so dev boxes and existing single-node clusters keep working.
--ovn-remote already passes through verbatim, so a comma-separated SB
endpoint list works for compute nodes; documented in usage.
* feat: OVN client multi-endpoint failover for RAFT clusters
Accept a comma-separated OVN NB/SB endpoint list so vpcd can target a
clustered DB. config.ParseEndpoints splits the list (trimming whitespace,
dropping empties); live.go Connect passes one libovsdb WithEndpoint per
endpoint, so the client tries them in order, fails over on disconnect, and
follows RAFT leader redirects. Single-endpoint strings still yield one
endpoint, so single-node dev is unchanged.
ovn-sbctl --db= already accepts the raw comma list, so the SB CLI
consumers (discoverChassis, gateway_claim) need no change.
* feat: write clustered OVN NB/SB endpoints across the RAFT quorum
spx admin init/join now emit comma-separated OVN NB/SB endpoint lists for
the first three quorum nodes (formation.BuildOVNDBAddrs) instead of loopback
or a single leader address, so vpcd fails over across the cluster.
firstboot defers OVN bring-up to the provisioning controller when it owns
formation (SkipFormation): a standalone single-node .db would otherwise block
the controller's clustered create/join.
* test: add multinode OVN RAFT cluster + failover e2e; document clustered topology
ovn_raft_test.go asserts NB/SB cluster/status reports a 3-server quorum with
one leader on every DB node, then stops the NB leader's ovn-central and proves
an NB write still lands via a surviving endpoint.
Docs: vpc-networking gains the multi-endpoint vpcd config and a RAFT
cluster-status debugging section; network-connections lists the 6643/6644 RAFT
ports.
Drives the ECS data plane against the local awsgw: a customer VPC plus a real
container instance launched from the spinifex-ecs-node AMI, then standalone
tasks in all three network modes and an awsvpc service fronted by an ALB target
group. Adds an ECS client to the harness, a Makefile target, and a
service-interfaces suite entry.
bridge/host tasks share the host netns where the agent credential endpoint owns
169.254.170.2:80, so they run a no-port command and assert placement + mode;
awsvpc and the ELB service prove real :80 serving. waitTaskRunning re-checks
after a settle so a transient RUNNING cannot pass.
* docs: add ECS (Elastic Container Service) guide + register ecs-quickstart workbook
Add a Container Services -> ECS doc mirroring the EKS/ECR shape: concepts
(cluster, task definition, task, service, container instances via the
ECS-AMI EC2 launch type), an aws ecs / console / Terraform quickstart,
task IAM roles via the credential endpoint, awsvpc networking, and the
honest v1 limitations (no service discovery, awslogs discarded, no rolling
deployments, no capacity providers, no distinct execution role).
Convert the ecs-quickstart workbook README to the doc-page format
(frontmatter + overview/prerequisites/instructions/troubleshooting) so it
renders as a Terraform Workbooks entry alongside the EKS workbooks.
* docs: add node-image prerequisite banner + infra diagram to EKS and ECS pages
Add a GitHub-style [!IMPORTANT] banner to the EKS and ECS prerequisites
flagging the required node-image import (eks-node / spinifex-ecs-node),
mirroring the install page's WAN-bridge banner, each with a describe-images
verification command.
Add a basic Spinifex topology diagram (SVG) to each Overview, in the
tf-nginx-alb visual style: the EKS managed control plane + node-group
workers, and the ECS ALB + container instances with the gateway/agent
and task-credential path.
End-to-end ECS stack against the Spinifex gateway: cluster, task definition
with a task role, container instances from the spinifex-ecs-node AMI, and an
awsvpc service fronted by an ALB target group. Unlike the console's provision-
capacity action, the workbook spells out the two things a Spinifex container
instance needs that AWS hides: a LAN-reachable gateway URL and the gateway CA,
both seeded into cloud-init user-data; instance creds come from IMDS via the
ecsInstanceRole profile. Live-verified apply (HTTP 200 through the ALB) and
destroy round-trip.
* fix: drop removed predastore s3.Config.Compaction from admin_test
The predastore submodule bump removed the Compaction field from s3.Config.
Parse the rendered [compaction] block into a local struct so the template
round-trip test no longer references the deleted field.
* feat: graceful guest drain on systemctl stop / host shutdown
systemctl stop spinifex.target tore down nbdkit/viperblock while guest QEMU
was still writing, corrupting guest filesystems. The ordered drain existed
only over NATS via cluster shutdown, never on the systemd/host path.
Add spx admin node drain --local (GATE+DRAIN against the local node, leaving
STORAGE/PERSIST/INFRA to systemd), wired as the ExecStop of a new
spinifex-shutdown.service oneshot ordered After= all services so it stops
first and drains guests while every service is still up. DDIL preserved: the
oneshot fires only on target/host shutdown, not on a daemon restart.
Harden the viperblockd SIGTERM handler to flush the WAL but skip reaping an
nbdkit a guest is still attached to. Add a units ordering invariant.
* fix: ExecStop drain timeout needs duration unit (120 -> 120s)
The spinifex-shutdown.service ExecStop passed --timeout=120, but spx admin
node drain's --timeout is a cobra Duration flag and rejects a bare integer
(time: missing unit in duration "120"). The drain exited 1 without running,
so a systemctl stop tore nbdkit out from under the running guest and corrupted
its ext4 (the exact failure this feature prevents). Pass 120s.
* fix: nbdkitInUse read ss state from correct column + cover it
ss -H rows are '<netid> <state> ...', so the state is field[1], not field[0]
(field[0] is 'u_str'). The old index never matched ESTAB, so an in-use nbdkit
read as idle and the SIGTERM path would reap it under a live guest. Add tests
exercising a real connected unix socket, an absent socket, and TCP transport.
* docs: add Containers section with EKS and ECR service pages
New docs/containers/{eks,ecr} pages covering each service via AWS CLI, the Spinifex console, and Terraform, plus the requisite VPC/IGW/NAT/SG/IAM setup. EKS page embeds console screenshots. Cross-links the EKS Terraform workbooks.
* docs(eks): rework Terraform workbooks into a capability ladder
Rework the three EKS workbooks into a coherent ladder and publish them to
the Containers section. All tiers are single- or three-node capable via
node_desired_size and serve a shared Spinifex-themed demo app from ECR,
replacing nginxdemos/hello.
- demo-app: new std-lib Go web app (themed page reporting pod/node/cluster/
region + hit counter; optional /data persistence), distroless image.
- eks-quickstart: node_desired_size var, ECR repo + themed app over NodePort.
- eks-https-ingress (was eks-addons-access): HTTPS via the aws-load-balancer-
controller addon + ACM, public/private VPC with NAT, managed-ingress=false.
- eks-gitops-argocd (was eks-https-ingress): Argo CD addon syncs the app from
a git repo, aws-ebs-csi-driver PVC (Viperblock-backed) for state, access
entry RBAC, HTTPS Ingress carried over.
Pending live e2e verification (image build/push, apply, ALB + PVC bind).
* fix(ecr): implement ListTagsForResource (empty tags) for client parity
The AWS provider calls ecr:ListTagsForResource on every repository read, which
returned 501 NotImplementedException and broke 'tofu apply' of any workbook that
creates an aws_ecr_repository. Implement it to return an empty tag set (resource
tagging stays a deferred feature) so reads succeed. Drop the tags block from the
three EKS workbooks' ECR repos so the provider doesn't call the still-stubbed
TagResource on create.
* feat(eks): pull from internal ECR via kubelet credential provider
Worker nodes could not pull custom images from the internal Spinifex ECR
registry: the eks-node had no DNS for the registry host, no containerd CA
trust, no port rewrite to :9999, and no pull credentials. Only public
images worked.
Add cmd/ecr-credential-provider, a kubelet exec credential provider that
fetches the node IAM-role credentials from IMDS, calls GetAuthorizationToken
against the gateway ECR endpoint, and returns the minted AWS:<jwt> as Basic
auth for the registry host. Thread the gateway URL, account, region, and
internal suffix into the agent userdata, which now writes the gateway CA,
a registries.yaml (CA trust + :9999 endpoint), the kubelet
credential-provider config and config.yaml.d drop-in, and an /etc/hosts
entry mapping the registry host to the gateway IP. Ship the provider binary
in the eks-node AMI.
Also remove a stray paragraph from the admin-cli README.
* fix: dial EKS ECR registry mirror by gateway IP
cloud-init manage_etc_hosts rewrites /etc/hosts from the alpine template on
every boot, wiping the registry-host mapping appended via bootcmd, so worker
nodes could not resolve the internal ECR host and pulls failed with no such
host. Point the k3s registries.yaml mirror endpoint and tls config at the
gateway IP instead (the gateway cert carries an IP SAN), keeping the pod image
ref port-less and dropping the DNS leg until northstar lands. Fall back to the
hostname endpoint when the gateway is not an IP.
* fix: attach node-role instance profile to EKS workers for ECR
EKS workers launched with no IAM instance profile, so IMDS served no role and
the ECR credential provider could not mint a registry token, leaving internal
ECR pulls failing with 401. Real EKS implicitly creates an instance profile for
the node role; do the same here. Wire a KV-backed IAM service into the EKS deps
and, at worker launch, find-or-create an instance profile named for the node
role, attach the role, and pass it to RunInstances so IMDS exposes the role to
the credential provider.
* feat: use mulga logo in EKS demo app
* feat: add ACM certificate tag support (List/Add/RemoveTags)
Implements ListTagsForCertificate, AddTagsToCertificate and RemoveTagsFromCertificate across the store, service, NATS, daemon and gateway layers. Import now persists tags. Fixes terraform aws_acm_certificate InvalidActionException on ListTagsForCertificate.
* test: cover ACM tag gateway and NATS wrapper paths
* feat: support EKS nodegroup tags (Tag/Untag/ListTags)
Extends EKS tag ops to back nodegroup ARNs alongside cluster ARNs. Nodegroup create-time tags persist on the record and echo via DescribeNodegroup, giving the terraform-aws provider a clean default_tags round-trip. Fixes aws_eks_node_group TagResource 501 NotImplementedException.
* fix: provision EKS ALB ingress via node credentials
The aws-load-balancer-controller addon could not provision an ALB. Three fixes:
- TLS: the controller's per-service ec2/elbv2/acm SDK clients install their own
BaseEndpoint resolver and build an HTTP client that bypasses AWS_CA_BUNDLE,
falling back to the Go system trust pool and rejecting the gateway cert as
'unknown authority'. Add SSL_CERT_FILE so the gateway CA joins the system pool.
- Credentials: an empty AWS_ROLE_ARN beside the web-identity token file
half-arms the SDK web-identity provider, which then signs anonymously
(MissingAuthenticationToken). Inject the IRSA env only when a service-account
role ARN is staged; otherwise omit it so the default chain falls back to the
node instance-profile credentials served over IMDS.
- Authorization: the node role lacked the ec2/elbv2 actions the controller
needs. The eks-https-ingress workbook now attaches an AWSLoadBalancerController
managed policy to the node role (CreatePolicy + AttachRolePolicy).
* fix: add force_delete to EKS workbook demo ECR repos
tofu destroy of an EKS workbook left the demo ECR repository behind: it
still holds the pushed demo image, so DeleteRepository (force=false)
returns RepositoryNotEmptyException. Add force_delete = true to each
workbook's aws_ecr_repository.demo so teardown removes the repo with its
images.
* fix: force-delete EKS control-plane ENIs on teardown
TerminateK3sServerVM deleted the CP ENI with a plain force=false
DeleteNetworkInterface. eniIsLiveAttachment reports InUse whenever the
record's Status/InstanceId/AttachmentId are set, so when the K3s VM is
gone but the ENI record's attachment fields were never cleared the delete
returned InvalidNetworkInterface.InUse permanently and EKSDeletingReaper
re-drove the same non-idempotent call every 90s, wedging the cluster in
DELETING.
Teardown owns its CP ENIs and has already terminated the VM, so the
attachment is authoritatively dead. Replace the InUse-retry budget loop
with detach-then-delete (detachAndDeleteServerENI): DetachENI clears the
stale attachment fields, then DeleteNetworkInterface passes the in-use
guard. Both calls tolerate an already-gone ENI (NotFound) so a race with
the async instance-terminate cascade resolves to idempotent success.
purgeClusterInfra's private-endpoint ENI path reuses the same helper.
* fix: detach+delete worker ENIs on EKS nodegroup teardown
A terminated nodegroup worker could leave its primary ENI in
spinifex-vpc-enis as in-use/attached, and a dangling ENI throws
DependencyViolation on subnet/VPC delete, blocking tofu destroy. Two
gaps:
TerminateWorkerInstances did a local-only vmMgr.Get and silently skipped
any worker owned by another node, stranding both the VM and its ENI on
multi-node clusters. Route the terminate per-instance via ec2.cmd.<id>
(mirroring the gateway TerminateInstances path) so the owning daemon runs
the full teardown — detach + force-delete the primary ENI and clear its
record. No responder / NotFound payload is treated as already-gone so a
retried DeleteNodegroup stays idempotent.
deleteInstanceENI (stopped-instance terminate) issued a force=false
DeleteNetworkInterface with no prior detach: a stale in-use attachment
made it fail InvalidNetworkInterface.InUse, leaving the ENI record behind
after the instance was already written to the terminated bucket. Detach
first, then delete, tolerating NotFound.
* fix: heal volume State drift on detach/terminate teardown
A detach/terminate could leave a volume's State empty instead of
'available'. DeleteVolume gated on State=='available' exactly, so it
returned VolumeInUse for an unattached volume nothing was using, leaving
it undeletable and blocking stack teardown. DescribeVolumes cosmetically
rendered an empty State as 'available', masking the drift.
- DeleteVolume now treats an empty State with no attachment as deletable
(an attached volume still returns VolumeInUse).
- DescribeVolumes derives an empty State from the attachment (attached ->
in-use, unattached -> available) instead of blindly rendering
available, so an empty-but-attached volume is no longer hidden.
- UpdateVolumeState normalizes an unattached volume with an empty state to
available, so a detach writeback that omits the state cannot strand the
volume in drift.
* fix: break all SG cross-references on EKS teardown
DeleteClusterSGs broke the cp<->nodegroup cycle too narrowly. It revoked
only ingress (IpPermissions), never egress (IpPermissionsEgress), so a
cross-reference via an egress rule kept the SG pinned on
DependencyViolation. It also resolved only the two named cluster SGs, so
any OTHER SG in the VPC referencing them — the default SG, the LBC/ALB SG,
the private-endpoint SG, user/TF SGs — was never revoked and pinned the
referenced SG on delete, leaving the VPC stuck.
Enumerate every non-default SG in the VPC and revoke BOTH ingress and
egress on each before deleting, breaking any cycle order-independently,
then delete only the cluster-owned SGs (referrer SGs are deleted by their
own teardown). The default SG is left untouched. Since DeleteClusterSGs
runs against both the customer VPC and the managed control-plane VPC, the
broadened sweep covers both teardown paths.
* feat: support TargetGroup ProtocolVersion in elbv2
CreateTargetGroup now stores ProtocolVersion (defaulting HTTP/HTTPS target
groups to HTTP1) and DescribeTargetGroups/Create output return it. Without
this the aws-load-balancer-controller sees a perpetual immutable-field
mismatch (desired HTTP1 vs empty) and recreates the target group every
reconcile, looping on DuplicateTargetGroupName once a shared ALB IngressGroup
reconciles more than one target group. NLB protocols (TCP/UDP/TLS) keep it
omitted to match AWS.
* fix: omit IRSA env from ebs-csi addon when no role staged
The ebs-csi controller manifest hardcoded AWS_ROLE_ARN={{SERVICE_ACCOUNT_ROLE_ARN}}
plus the web-identity token volume. With no service-account role staged the
placeholder rendered empty, half-arming the SDK web-identity provider, which
panics 'role ARN is not set' and CrashLoops the controller, leaving PVCs
Pending. Convert to the conditional {{IRSA_ENV}}/{{IRSA_VOLUME_MOUNT}}/{{IRSA_VOLUME}}
markers like the LBC bundle so the IRSA env and token volume are omitted when
no role is staged, falling back to node instance-profile credentials over IMDS.
The EBS-specific AWS_EC2_ENDPOINT/AWS_ENDPOINT_URL_EC2 stay in both modes.
Requires an eks-node AMI rebake to take effect.
* docs: route gitops-argocd workbook through a shared ALB and expose ArgoCD UI
Fold the demo app and ArgoCD ingresses onto one ALB via an LBC IngressGroup
with host routing (app./argocd. on a wildcard cert) instead of one ALB per
ingress, add a NodePort + HTTPS Ingress for the ArgoCD UI, and document the
access steps. Add the node-role LBC and EBS-CSI IAM policies the controllers
need (Spinifex wires controller creds at the node level, not IRSA) and an
ignore_changes block for the cluster's access_config and
vpc_config security_group_ids, which Spinifex DescribeCluster does not echo
back, so the provider stops trying to replace the cluster on every plan.
* fix: stop addon-sync substituting IRSA markers named in comments
The ebs-csi controller manifest's header comment spelled out the literal
{{IRSA_ENV}} / {{IRSA_VOLUME_MOUNT}} / {{IRSA_VOLUME}} marker tokens. addon-sync
matched each marker by substring, so the comment lines were replaced with the
env/mount blocks, injecting a bare YAML sequence between two documents. K3s'
auto-deploy then rejected the whole file (ParseManifestFailed: cannot unmarshal
array into unstructured), so the ebs-csi Addon CR never applied and the EKS
addon hung in CREATING. Reword the comment to not contain the literal tokens,
and anchor the marker substitution to lines that are exactly the marker
(whitespace aside) so a future comment mentioning a marker can't retrigger it.
* fix: disable K3s local-storage on EKS clusters in parity mode
In AWS LB Controller parity mode (BuiltinIngress=false) the K3s server
disabled traefik and servicelb but left local-storage enabled. Its local-path
provisioner ships a StorageClass marked default, which races the EBS CSI
ebs-gp3 default StorageClass — two defaults, so dynamic PVCs bind
nondeterministically. EKS has no local-path, so disable local-storage too and
let ebs-gp3 be the sole default. The built-in-ingress path is unchanged.
* fix: re-encrypt HTTPS target groups in haproxy ALB backends
An ALB target group with backend-protocol HTTPS (e.g. argocd-server, which
serves TLS on its own port) rendered a plaintext haproxy server line. HAProxy's
own check then spoke HTTP to a TLS port, failed, and marked the server DOWN,
returning 503 — even though the lb-agent's separate HTTPS health probe reported
the target healthy, so describe-target-health masked the fault.
Emit check-ssl ssl verify none on the server line for HTTPS target groups so
both the check and proxied traffic re-encrypt to the backend.
* fix: reconnect wedged QMP client on next command
A timed-out QMP decode under host contention left the cached client's
shared json.Decoder mid-message, wedging every later command and breaking
EBS AttachVolume/DetachVolume for the VM's lifetime. Mark the client Dead
on encode/decode error and redial the retained socket path (re-running the
qmp_capabilities handshake in place) on the next send.
* fix: round-trip security-group rule descriptions
SG ingress/egress rules dropped the per-rule Description on store and
describe. The AWS Load Balancer Controller tags the worker-node SG rules it
manages with a UserIdGroupPair description and identifies them by that value
to revoke them on teardown. Without the round-trip the controller cannot
match its rules, never revokes them, and the backend security group stays
referenced — DeleteSecurityGroup returns DependencyViolation forever,
hanging the ingress finalizer and tofu destroy with orphaned security groups.
Persist Description on SGRule (excluded from sgRuleKey so it is metadata, not
identity) and render it back through describe.
* fix: reclaim customer-VPC nodegroup SGs on managed-CP-VPC teardown
In the managed control-plane VPC topology, launchNodegroupInfra creates the
cluster control-plane and nodegroup security groups in the customer VPC for
worker<->control-plane networking, but purgeClusterInfra only reclaimed the
security groups in the managed CP VPC. The customer-VPC SGs orphaned,
cross-referenced each other, and pinned the customer VPC with
DependencyViolation, hanging tofu destroy of the VPC. Reclaim them in the
managed-CP-VPC branch too, matching the legacy customer-VPC branch.
* fix: reclaim ALB EIP when system VM already gone on terminate
TerminateSystemInstance only released an internet-facing ALB's Elastic IP on
the local path, where the VM is still present in the manager. When the VM was
already gone (health-reaped, crashed, or raced by ENI teardown), it took the
remote/no-owner path and returned idempotent success without reconciling the
EIP, leaking the wan-pool address still associated to a deleted ENI.
Add EIPServiceImpl.ReleaseAddressByInstanceID, an idempotent account-agnostic
scan that disassociates then releases any EIP recorded against an instance, and
call it as a backstop in TerminateSystemInstance for both branches.
* fix: cascade-prune demo PVC via Argo CD finalizer in eks-gitops workbook
The demo Application carried no resources finalizer, so tofu destroy removed
the Application CR without pruning the synced PVC. The PVC survived, the cluster
was destroyed, and the Delete-reclaim PV's EBS volume orphaned. Add the
resources-finalizer.argocd.argoproj.io finalizer so deleting the Application
cascades to the PVC and ebs-csi reaps the volume before cluster teardown.
* feat: raw-IP access + documented Argo CD creds in eks-gitops workbook
The shared ALB host-routed everything, so the raw ALB IP 404'd in a browser
without an /etc/hosts entry. Make the app the hostless catch-all on :443 and add
a hostless Argo CD listener on :8443, so https://<alb-ip>/ serves the app and
https://<alb-ip>:8443/ serves the UI with no DNS. Surface the admin-password
command as a tofu output and document the credential + IP URLs in the README.
* fix: reclaim ALB EIP on the owning-node terminate path
The EIP backstop lived only in TerminateSystemInstance, but the ALB
delete path goes serveSystemTerminateInstance -> terminateSystemInstanceLocal
directly, bypassing it, and releaseSystemInstanceEIP relied on the VM's
cached allocation which is often empty. Extract reclaimSystemInstanceEIP
(authoritative KV reconcile via ReleaseAddressByInstanceID) and call it
from terminateSystemInstanceLocal as well as the no-owner backstop, so an
internet-facing ALB's EIP is released on every terminate route.
* chore(eks): drop coredns from the managed addon catalog
Cluster DNS ships as the baked node-local coredns-mulga DaemonSet, not as
a managed addon — there is no bundled coredns manifest, so CreateAddon
coredns would stage but fail VM-side render. Remove the phantom catalog
entry so DescribeAddonVersions and CreateAddon no longer advertise it;
repoint the addon tests that used coredns as their sample to argocd.
* feat(ui): group EKS and ECR under a Containers nav section
Fold the separate EKS and ECR sidebar groups into one Containers group
with EKS (clusters) and ECR (repositories) entries.
* fix(ui): satisfy strict null checks in ECR component tests
Index mock.calls via optional chaining and narrow the getAllByRole result
before clicking, clearing the TS2532/TS2345 errors that failed pnpm fix.
* refactor(eks): hide internal fixture addons from the public catalog
Add an AddonSpec.Hidden flag and mark spinifex-noop hidden: it stays
creatable (lookupAddon finds it, so the delivery-transport e2e still drives
it) but no longer surfaces in the unfiltered DescribeAddonVersions listing.
* refactor(eks): remove K3s built-in ingress; LBC-only
Drop the BuiltinIngress option and its managed-ingress tag opt-in. traefik,
servicelb, and local-storage are now always disabled on EKS nodes (AWS
parity — Service type=LoadBalancer and Ingress are the Load Balancer
Controller's job). Removes the EKS_DEFER_TRAEFIK userdata flag, the k3s.initd
traefik .skip staging, and the maybe_enable_traefik deferred-enable loop in
the state reporter.
* fix(ui): clear lint debt in VPC-wizard mutations and CIDR validation
Parallelize the independent subnet-create and route-table-association loops
in the create-VPC mutation with Promise.all (each task records its resource
in the rollback list before any further call), and switch the CIDR-validation
regex to named capture groups. Clears the no-await-in-loop and
prefer-named-capture-group lint errors.
* fix: carry gateway port in ECR registry endpoints; rename mulga.internal -> spinifex.internal
The ECR registry is served on the gateway port (:9999), but proxyEndpoint and
repositoryUri were emitted port-less, so docker login/tag/push dialed :443 and
failed. Derive the port from the awsgw listen host and append it to the registry
host (omitted for 443). Also rename the default internal DNS suffix.
* docs: drop verbose ECR :9999 host note
* docs: fix literal-asterisk emphasis (single-* not rendered)
* docs: brace-wrap ${REGISTRY}:latest (zsh :l modifier ate the tag); document Docker CA trust
* feat: default ECR registry URIs to the gateway host (no-DNS interim)
The registry authenticates by token, not hostname, so the per-account
<acct>.dkr.ecr name is cosmetic. Advertise the gateway's reachable bind host:port
(already a cert SAN) in repositoryUri/proxyEndpoint so docker login/tag/push need
no DNS; the parity host still works server-side where DNS exists.
* fix: serve ECR registry on a DNS-free gateway host end to end
Advertise the gateway's AdvertiseIP as the ECR registry host when the AWSGW
bind is unspecified (0.0.0.0/::), so repository_url resolves to a reachable
host:9999 carried in the server cert SANs rather than the unresolvable
per-account parity name. Docker push then dials it directly with no DNS.
Mirror the same host on EKS workers: the registries.yaml mirror keys and the
credential provider matchImages now cover the port-less parity name, the
port-ful parity name, and the gateway IP:9999, all redirecting to the dialed
gateway endpoint. A port-ful pull from the API-returned repository_url matches
the mirror instead of bypassing it into a failed DNS lookup.
Net: docker push host, pod image host, and the API's repository_url are the
same value, with no DNS or /etc/hosts.
* docs: resolve eks-https Ingress ALB DNS name to its public IP (no DNS)
* docs: resolve eks-gitops Ingress ALB DNS name to its public IP (no DNS)
* docs: remind to run aws eks update-kubeconfig before kubectl in EKS workbooks
* test(e2e): add ECR end-to-end suite (control plane + docker/crane/skopeo)
New tests/e2e/ecr/ suite plus harness support:
- harness: ECR SDK client, control-plane helpers (repo CRUD, get-login-password,
describe-images), and docker/crane/skopeo CLI wrappers that skip when the
binary or registry-host resolution is absent.
- suite: control-plane CRUD + policy + lifecycle round-trip; docker login/push/
pull; crane append/pull and skopeo copy exercising the Bearer /v2/token flow.
- registered e2e-ecr in the Makefile + service manifest.
Predastore capacity/load leg is a skipped placeholder pending mulga-siv-359/356.
* test(e2e): carry awsgw port in ECR registry host for dev clusters
Dev clusters bind awsgw on a non-standard port (e.g. 9999); production uses
:443. ECRRegistryHost now appends SPINIFEX_ECR_PORT when set so docker/crane/
skopeo address the right endpoint, and RequireRegistryResolves strips the port
before DNS lookup.
Josh Siviour