mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-19 19:01:42 +00:00
07dce613eb5ac760bf5316b606eef5664e595eb3
12 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Josh Siviour
|
a3fb4cccec |
fix(eks): backoff and terminal state on delete re-drive, CSI volume reclaim reporting, independent e2e subtests (#642)
* fix: bound EKS DELETING re-drive with backoff and a terminal give-up reapCluster re-drove purgeClusterInfra on every GC tick with no attempt tracking, so a permanently-failing teardown (e.g. an unretriable DependencyViolation) was retried forever. Track attempt count and last attempt time on ClusterMeta, back off exponentially between re-drives, and give up after maxDeleteReapAttempts with a single error-level log. Status stays DELETING on give-up so the cluster's infra remains tracked and billable pending operator intervention, preserving the ADR-0006 §6 billable-before-sweep invariant. * fix: create the EKS e2e node role independently in each subtest runEBSCSIVolume string-built the worker node role ARN without ever creating it, only passing because runIRSAPod's t.Cleanup discarded DeleteRole's error while the role was still attached to its instance profile, leaving it behind for EBSCSIVolume to reuse by naming convention. Extract ensureNodeRole and call it independently from both subtests, detaching the role from its instance profile before deleting it and asserting that error instead of discarding it. * fix: reclaim CSI-provisioned EBS volumes on EKS cluster delete purgeClusterInfra tore down the control plane, nodegroups, and networking but never looked at EBS volumes, so any volume the in-cluster CSI driver had provisioned for a PVC was left behind untracked and unbilled for. Add a report-only reclaim step that scans for volumes tagged with the cluster's CSI owner tag and logs them for operator follow-up. Volumes are never auto-deleted: a PV's reclaim policy (Delete vs Retain) is a Kubernetes-side property the CSI driver does not tag onto the EC2 volume, so there is no safe way to tell from tags alone whether deleting a given volume is intended. This mirrors the volume-leak reaper's existing mark-and-alarm policy for the same reason. The cluster-owner tag requires the EBS CSI controller's --k8s-tag-cluster-id flag, added here to the controller manifest; without it a CSI volume carries no cluster-scoped tag and reclaim would have to guess across every cluster sharing the account. * fix: persist the last purge error on a wedged DELETING cluster DeleteReapExhausted told an operator a cluster's teardown had given up, but not why: nothing recorded the failing purge's error. Persist it on every failed re-drive, not only once the reaper exhausts its attempts, so it is visible on a still-retrying cluster too. Status stays DELETING throughout, preserving the billing invariant that untorn-down infra remains tracked. * fix: make the EKS e2e suite confirm its CSI volume is actually deleted The EBSCSIVolume subtest deleted its PVC on cleanup but never confirmed the underlying volume was reclaimed, so a CSI driver that silently failed to delete it would leak a volume with nobody noticing. The suite provisions and owns this volume, so unlike production teardown it can safely wait on its StorageClass's Delete reclaim policy: capture the CSI volumeHandle while the PVC is bound, then have cleanup poll EC2 for that exact volume to disappear before the addon/nodegroup that run the CSI controller are torn down. |
||
|
Josh Siviour
|
6873875248 |
fix(eks): tolerate the CriticalAddonsOnly taint on konnectivity-agent (#634)
On a zero-worker or GPU-only cluster no node tolerates the DaemonSet, so it has zero desired pods. The apiserver then has no tunnel to kube-system pods (including metrics-server), v1beta1.metrics.k8s.io never goes Available, and namespace GC hangs on the kubernetes finalizer for every namespace, not just ones using metrics. Add the same CriticalAddonsOnly + nvidia.com/gpu tolerations already used by every other control-plane-critical addon in this repo (aws-load-balancer-controller, ebs-csi-driver, argocd) so the agent also schedules onto the control plane. |
||
|
Ben Duncan
|
28a876d17d | feat(dns): resolvable ALB/NLB + EKS DNS, forwarder hardening, cross-tenant reconcile (#532) | ||
|
Josh Siviour
|
d3ac8c0656 |
test(eks): in-cluster IRSA pod e2e (AssumeRoleWithWebIdentity) (#535)
Add an IRSAPod subtest that applies a real pod wired for IRSA — a projected ServiceAccount token (aud sts.amazonaws.com) plus the AWS_ROLE_ARN / AWS_WEB_IDENTITY_TOKEN_FILE / AWS_ENDPOINT_URL_STS / AWS_CA_BUNDLE env the addon-sync agent injects — and asserts the pod's in-cluster aws sts get-caller-identity resolves to the assumed IRSA role. This closes the gap left by IRSAWebIdentity, which only exchanges the token host-side. Extract registerOIDCRole (shared with IRSAWebIdentity); the pod runs on a 1-node worker nodegroup (the control-plane node is CriticalAddonsOnly-tainted) and reaches awsgw STS over the worker subnet NAT. |
||
|
Josh Siviour
|
9f349e86ca |
feat(eks): expose NVIDIA GPUs to pods (Epic B) — VFIO QMP, worker registration, device-plugin GPU access (#507)
* feat(eks): expose NVIDIA GPUs to pods via CDI device plugin GPU nodegroups now label workers nvidia.com/gpu.present=true and taint them nvidia.com/gpu=present:NoSchedule (via a k3s config.yaml.d drop-in, since k3s has no K3S_NODE_TAINT env), and stage a hidden nvidia-device-plugin addon that addon-sync renders into the K3s auto-deploy dir. The device plugin runs with --device-list-strategy=cdi-cri and is gated to GPU nodes by nodeSelector + toleration, advertising nvidia.com/gpu allocatable so pods land on GPU nodes and get the device injected via the CDI spec baked by mulga-cdi-generate. Relies on containerd 2.0.5 default enable_cdi=true (no config fork). * fix(vm): scale QMP greeting deadline for VFIO passthrough guests A GPU passthrough guest (-device vfio-pci + large -m) must lock and DMA-map its entire guest RAM through the IOMMU before QEMU's QMP monitor answers, which exceeds the fixed 30s greeting deadline and gets the VM SIGKILLed at launch. Parameterize the greeting timeout (NewQMPClientWithGreetingTimeout) and scale it to 180s for VMs with GPU attachments; plain VMs keep the 30s default and reconnects against an already-running QEMU keep it too. * fix(eks): register GPU workers reliably and expose GPUs to pods Three fixes let a GPU nodegroup worker boot, register, and advertise its GPU: - k3s-agent.service gains Delegate=yes (plus KillMode/TasksMax/limits and overlay/br_netfilter modprobe): k3s embeds containerd+kubelet in-process, so on cgroup-v2 the kubelet cannot create /kubepods without a delegated subtree and ContainerManager.Start fails before Node registration. - The GPU node label rides a k3s config drop-in (20-gpu.yaml node-label + node-taint) instead of K3S_NODE_LABEL, which k3s ignores; without the label the nvidia-device-plugin nodeSelector never matches. - Raise the nodegroup ready timeout to 20m for the ~7min GPU first boot. Adds the GPU e2e (VPC + NAT-GW egress harness) and a slog-restore unit test. * fix(eks): install ecr-credential-provider on the GPU node AMI The GPU worker's kubelet is started (from nodegroup userdata) with --image-credential-provider-config + --image-credential-provider-bin-dir= /usr/local/bin, but the eks-node-gpu AMI never built or installed the ecr-credential-provider binary. kubelet treats a referenced-but-missing provider binary as a fatal RegisterCredentialProviderPlugins error, so the node crash-loops and never registers (while the Alpine eks-node worker, which ships the binary, joins fine). Build + install it in the GPU manifest; the server-only binaries stay omitted since GPU nodes are agent-only. Also tee k3s-agent stderr (and its embedded kubelet klog) to the serial console: Ubuntu logs only to journald, which is off-box-invisible on a worker in an isolated customer VPC, so a kubelet that fails to register left no trace. * fix(eks): give the nvidia-device-plugin its own GPU access The CDI-mode device plugin (--device-list-strategy=cdi-cri) must run nvml.Init and generate the CDI spec in its own container, but the DS had no GPU wiring, so nvml.Init crash-looped and nvidia.com/gpu was never advertised. Run the DS under the k3s-auto-configured nvidia runtimeClass with NVIDIA_VISIBLE_DEVICES/CAPABILITIES=all, the host root mounted read-only at /driver-root so it can locate the driver libs + ld.so.cache, and /var/run/cdi mounted writable so the generated spec is visible to containerd. No enable_cdi drop-in is needed on k3s v1.32.5 / containerd 2.0.5. GPU workload pods still need only resources.limits nvidia.com/gpu. Live-validated end-to-end on the single-GPU host (RTX A1000): baked control-plane AMI, GPU nodegroup, nvidia.com/gpu allocatable, nvidia-smi pod, zero manual intervention. * test(ec2): drop obsolete restoreSlogDefault test Rebased onto dev, which dropped the restoreSlogDefault workaround in #506 (viperblock no longer mutates the global slog). The test referenced the now-deleted helper and no longer compiles. Real GPU/registration diff is independently covered (diff coverage 95.3%). |
||
|
Josh Siviour
|
9d662f9889 |
feat: EKS EBS CSI driver (Viperblock) — egress, attach, node discovery, e2e (#402)
* feat: bake aws-ebs-csi-driver addon + mdev by-id bridge Add the aws-ebs-csi-driver entry (v1.40.1) to the eks addon catalog and ship its baked manifests (RBAC, IRSA-wired controller, node DaemonSet, default gp3 StorageClass) under the eks-node image. The node plugin locates EBS volumes via /dev/disk/by-id, which busybox mdev does not populate. Add mulga-ebs-byid: an mdev rule + helper that symlinks nvme-Amazon_Elastic_Block_Store_<serial> from the virtio-blk serial, plus a boot oneshot that points the kernel hotplug helper at mdev and coldplugs volumes present at boot. * test: e2e EBS CSI volume — PVC bind + mount + reschedule survival Add a TestEKS/EBSCSIVolume subtest that installs the aws-ebs-csi-driver managed addon bound to an IRSA role, provisions a default gp3 PVC + pod, and asserts a marker written by the first pod survives a reschedule onto a fresh pod backed by the same PVC. Exercises the full data path: CreateVolume(Viperblock)/AttachVolume virtio-blk hotplug with serial set to the volume-id, mdev /dev/disk/by-id symlink, and ext4 mount. * feat: eks-node provider-id + topology/instance-type labels for EBS CSI mulga-eks-provider-id boot oneshot writes a K3s config.yaml.d drop-in from IMDS before K3s starts: kubelet provider-id plus the region, zone and instance-type node labels. The aws-ebs-csi-driver node plugin reads this metadata for NodeGetInfo (instance id from providerID, region/zone from topology labels, instance type for the volume-limit family lookup). k3s runs no AWS cloud-provider so none of it is set otherwise, which left the node plugin's metadata init failing, NodeGetInfo panicking in IsNitroInstanceType, and the CSINode carrying no topology key. Wire the service into the image manifest (INSTALL_FILES + ENABLE_SERVICES) and chmod it in setup. * test: e2e EBS CSI controller IRSA policy + failure diagnostics awsgw enforces IAM on assumed-role EC2 calls, so the controller's CreateVolume/AttachVolume need a permission policy on the IRSA role. Attach a customer-managed EC2 policy (AWS-managed ARNs are opaque and grant nothing) covering the EBS CSI action set; CreateVolume then succeeds. Add an OnFailure dump of the CSI control path (provisioner and plugin logs, pvc/pod describe, events, csinode) to the EBSCSIVolume subtest so provisioning/attach failures are diagnosable post-teardown. * feat: EBS CSI obeys control-plane taint; e2e worker nodegroup Drop the CriticalAddonsOnly/NoExecute tolerations from the EBS CSI controller + node manifests so the driver runs only on customer worker nodes, never the system control-plane VM. The e2e creates a 1-node worker nodegroup and the writer/reader pods drop their CP tolerations so the customer-owned volume attaches in the customer space. * fix: EBS CSI attach — decouple hotplug PCIe port from device name; iothread rollback virtio-blk-pci hot-plug bus was derived from the AWS device-name letter (/dev/sd[f-p]); the EBS CSI driver sends arbitrary names (/dev/xvdaa) that map to no slot, so device_add fell back to pcie.0 — which rejects hot-plug — and the attach hung. A failed attach also left the per-volume iothread object behind, so every retry died on object-add 'duplicate property'. nextHotplugEBSPort allocates the lowest free hotplug-ebs port from live query-block state, independent of the device name. delIothreadBestEffort removes the iothread on every attach rollback path. * fix: EBS CSI node discovery — un-shadow mdev by-id rule, mint nvme link Alpine eks-node runs busybox mdev (no eudev), which stops at the first matching /etc/mdev.conf rule. setup.sh appended the mulga-ebs-byid rule after the stock 'vd[a-z].* -> persistent-storage' line, so it never fired on hot-attach: only /dev/disk/by-id/virtio-<serial> was created, while the upstream aws-ebs-csi-driver resolves nvme-Amazon_Elastic_Block_Store_<volid>. Swap the stock vd* rule in place to route through mulga-ebs-byid, which now delegates to persistent-storage (preserving stock links) before minting the nvme-style link the node plugin expects. * test: EKS e2e — NAT Gateway egress for private worker nodegroup The customer-VPC worker is private; AttachIGW programs no SNAT (mirrors AWS: an IGW serves only public-IP instances), so an IGW-only fixture left the worker unable to reach the public NLB endpoint or pull public CSI images — the nodegroup never joined. createWorkerEgress now builds the real topology: an IGW-fronted public subnet hosting a NAT Gateway, with the worker subnet default-routed to it. Associating the worker route table triggers the subnet-wide SNAT egress reroute. Teardown drains the NAT Gateway before releasing the public subnet + EIP it pins. |
||
|
Julian Sommer
|
2e9501524b | feat(e2e): more e2e coverage (#365) | ||
|
Josh Siviour
|
b23fa3bf60 |
feat(eks): managed control-plane VPC (Set B) + control-plane lifecycle hardening (#356)
* feat(eks): VM-side managed-addon delivery transport
Stage CreateAddon manifests in KV host-side; the control-plane VM pulls the
staged set through the AWS gateway (signed GET /clusters/{name}/internal-addons/
{accountId}), renders the baked bundles into the K3s auto-deploy dir, and
reports per-addon delivery status on a dedicated eks.addon.*.status channel that
the cluster reconciler CASes onto AWS-visible AddonStatus (CREATING->ACTIVE).
- gateway: ListInternalAddons route + ListStagedAddonManifests NATS action
- handlers: addon status reconciler (nextAddonStatus), staging installer
- eks-node AMI: eks-gateway-fetch binary + mulga-eks-addon-sync agent
- agent renders idempotently (cmp before replace) so K3s auto-deploy does not
re-apply every tick and clear the Addon CR .status.gvks readiness signal
- agent mirrors per-tick delivery outcomes to the serial console for host-side
observability
* fix(eks): provision cluster NLB synchronously so the endpoint carries the real front-end IP
The cluster NLB front-end IP is assigned by the async LB-VM launch
(launchLBVMAsync), but EnsureClusterNLB read it back synchronously right after
CreateLoadBalancer returned — losing the race and falling back to the synthetic
<lb>.elb.spinifex.local DNS name. That name is unresolvable (no Route53) and is
not in the apiserver serving-cert SAN, so kubectl against the cluster never
connects.
Split the elbv2 create: the public CreateLoadBalancer stays async (267.4 — an
inline multi-minute VM boot head-of-line-blocks the gateway responder), and a
new CreateLoadBalancerSync drives the data-plane launch inline and returns the
LB carrying its front-end address. The EKS cluster-create worker runs off the
gateway responder, so it uses the sync entry and reads the IP from the return
value instead of racing persisted state. No polling.
- elbv2: factor provisionLBDataPlane out of launchLBVMAsync; add CreateLoadBalancerSync
- eks: ensureClusterLB uses the sync entry, sets FrontendIP from the result,
drops the read-back; EnsureClusterNLB fails loud (ErrClusterNLBFrontendIPUnavailable)
when no front-end IP is allocated rather than shipping the DNS-name fallback
- eks: drop the DNS-name endpoint fallback; the endpoint is always the front-end IP
* feat: auto-wire IGW for internet-facing EKS cluster endpoint
An internet-facing cluster NLB allocates an external front-end IP and the
OVN dnat_and_snat for it, but the external switch + localnet + gateway LRP
that make that IP answerable on the wire are built only on IGW attach. The
control-plane NLB is a system instance, so ensure an IGW on cluster build
and reclaim it on teardown.
EnsureClusterIGW (idempotent, reuses a customer IGW untouched) runs before
EnsureClusterNLB when the endpoint is public; DeleteClusterIGW (ownership-
scoped) removes only the cluster-owned IGW in purgeClusterInfra, before the
VPC delete. New IGW dep wired from the daemon.
* fix(eks): tear down infra on failed cluster launch to stop LB EIP leak
A CreateCluster that fails during its background launch flipped the meta
to FAILED but performed no teardown, relying on a later same-name create
to reclaim and purge the infra. EKS cluster names are unique per create,
so that reclaim never fires: the internet-facing load-balancer VM keeps
running with its allocated+associated dnat_and_snat EIP indefinitely.
Over repeated create/delete cycles the EIP pool fills with allocations
bound to terminated instances, so a later allocation's advertised
endpoint and its live OVN NAT diverge onto different pool addresses.
- failClusterLaunch now runs a best-effort purgeClusterInfra on the
in-memory meta (freshest refs even when the failing step was the meta
write itself) before MarkClusterFailed. purgeClusterInfra is
idempotent, so a later reclaim or DeleteCluster re-purge is a no-op;
the FAILED meta is retained for observability.
- Daemon releaseSystemInstanceEIP extracted and called from both
TerminateSystemInstance and cleanupFailedSystemInstance, so a launch
that fails after AssociateAddress releases the eipService allocation
instead of leaking it (MarkFailed's ReleasePublicIP only knows the
externalIPAM path).
* feat: EKS managed control-plane VPC (AWS Set B) composed from EC2 APIs
CreateCluster now auto-builds the managed control-plane VPC under the
system account, the spinifex analogue of AWS EKS's hidden managed-account
VPC: a public subnet for the internet-facing NLB, private subnet(s) for the
k3s control-plane VM(s), and a NAT gateway giving the private CP egress for
image pulls. It is composed from the real EC2 VPC-family APIs
(CreateVpc/Subnet, IGW, RouteTable/Route, NatGateway), so per-subnet egress
gating is wired by the existing topology subscribers off the route-table
events those APIs publish — no direct OVN mutation.
This resolves the mulga-siv-292 root cause: the internet-facing NLB and the
private CP were crammed into one customer subnet with no IGW route, so both
were treated as private and dropped by the lr_in_policy 1100 rule, killing
the LB-VM return leg and lb-agent heartbeat. The CP only survived via a
per-instance 1200 reroute bandaid, now removed — the topology expresses
egress instead.
Placement is uniform single/multi-node (CP always in the private subnet).
The system LB VM heartbeats over the mgmt bridge (SystemGatewayURL) rather
than the WAN. Managed-VPC teardown reclaims NAT GW + EIP, route tables,
subnets, IGW, and the VPC in dependency order. Customer subnetIds (Set A /
worker side) remain consumed-not-created and are deferred to the worker
round.
* fix(eks): bake cluster-owner account into CP-VM EKS_ACCOUNT_ID
The managed control-plane VPC (Set B) launches the K3s control-plane VMs and
their ENIs under the system (infra) account, but the on-VM agents — bootstrap
publish, state report, token-review, and add-on fetch — must key on the
cluster-OWNER (customer) account that owns the cluster meta, namespaces, and
AccessEntry KV. Add ClusterAccountID to K3sServerInput and bake it into the
VM's EKS_ACCOUNT_ID, decoupling it from the infra AccountID the VM launches
under. Without this the VM reported state and fetched add-ons against the
system account, so the cluster never observed a healthy control plane (stuck
CREATING, null CA) and kubectl/add-on delivery timed out.
Also refresh the e2e suite doc comment to describe the Set B topology and the
data-plane subtests (kubectl + managed-addon delivery) that now run.
* fix(eks): explicitly delete addon objects on unstage
K3s does not delete the applied resources when an auto-deploy manifest file is
removed from the server manifests dir (documented behaviour). The addon-sync
GC pass relied on that, so after DeleteAddon the rendered manifest was dropped
but its Namespace/ConfigMap stayed standing — the e2e AddonDelivery GC wait
timed out. Copy the manifest aside, drop the original so K3s stops tracking it,
then kubectl delete the objects (--wait=false to avoid finalizer stalls).
|
||
|
Julian Sommer
|
50b5495d26 | chore: more comment cleanup | ||
|
Josh Siviour
|
4ef19fc488 | feat(ui): EKS console (#310) | ||
|
Josh Siviour
|
e44221d653 |
feat(eks): public/private endpoint access + publicAccessCidrs-driven NLB scheme & SG (#315)
* feat(eks): public/private endpoint access drives NLB scheme + IP:port reachability Parse resourcesVpcConfig.endpointPublicAccess/endpointPrivateAccess/ publicAccessCidrs (defaults public=true, private=false, cidrs=0.0.0.0/0) and reject the both-disabled combination. Public access provisions an internet-facing NLB and publishes its external frontend IP as the cluster endpoint; private access keeps the NLB internal and uses the VPC frontend IP. Inject the resolved endpoint IP into the k3s apiserver tls-san so the published IP:443 endpoint serves a cert valid for verified TLS, and surface the access fields in DescribeCluster. The e2e suite now connects via the verified endpoint with TLS verification on, dropping the insecure mgmt-IP shim. * fix(eks): authorize NLB->apiserver ingress on control-plane SG The cluster control-plane security group was created with empty ingress, so the NLB's backing LB VM could not reach the apiserver on 6443 from inside the VPC. The target group stayed unhealthy and the published endpoint never served. Authorize tcp/6443 on the control-plane SG from the VPC CIDR after the SGs are created; public exposure remains gated at the NLB front-end by publicAccessCidrs, so this only opens the in-VPC LB->apiserver hop. Extend SubnetVPCResolver with GetVPCCIDR so the service can resolve the VPC CIDR for the rule. * feat(eks): thread publicAccessCidrs to NLB SetLoadBalancerIngressCIDRs Wire the cluster's publicAccessCidrs (parsed from CreateCluster ResourcesVpcConfig) through EnsureClusterNLB to the ELBv2 SetLoadBalancerIngressCIDRs override so a public cluster endpoint can be narrowed below the wide-open scheme default. The override only fires for an internet-facing NLB whose CIDRs restrict below 0.0.0.0/0; internal NLBs and the default keep the LB's out-of-the-box ingress. |
||
|
Josh Siviour
|
496424c41c |
test(eks): EKS control-plane E2E suite (Sprint 6g) (#304)
* test(eks): EKS control-plane e2e suite (Phase 1, API-level)
Add tests/e2e/eks/eks_test.go driving the EKS lifecycle against awsgw:
CreateCluster -> ACTIVE (endpoint + CA asserted), kubeconfig artifact
assembly, AccessEntry CRUD, get-token presign decode, DeleteCluster -> gone.
Harness: EKS SDK client on AWSClient + WaitForEKSCluster{Active,Deleted}
pollers. Wire e2e-eks into the Makefile and the single-node CI suite list.
* test(eks): Phase 2 kubectl get-nodes data-plane gate
Add the reachability shim (harness/eks_mgmt.go) that reads the control-plane
VM's br-mgmt IP from the cluster KV meta over NATS, plus a kubectl wrapper
(harness/kubectl.go) that skips when kubectl is absent. KubectlGetNodes points
kubectl at https://<mgmtIP>:6443 (insecure-skip-tls-verify; cert SANs the NLB
DNS, not the mgmt IP) with an aws eks get-token exec block and polls until the
control-plane node is Ready — the get-token webhook auth regression gate.
IRSA pod + the real NLB/Route53 passthrough are deferred to a follow-up.
* test(eks): tolerate doubled NotFound code + dial loopback NATS
DeleteCluster detection matched the SDK constant ResourceNotFoundException,
but awsgw emits ResourceNotFoundExceptionException on the wire — match the
NotFound code by substring so deletion is detected immediately instead of
timing out. The mgmt-IP shim dialed NATS.Host verbatim (0.0.0.0:4222), which
the serving cert does not SAN; rewrite the wildcard bind to loopback.
Validated live: all 6 subtests green, kubectl get nodes shows the
control-plane node Ready via the get-token webhook auth path.
* feat: build system images with libguestfs (no host block devices)
Replace the qemu-nbd + sudo mount + chroot + /dev-bind flow in
build-system-image.sh with libguestfs (virt-customize / virt-resize /
guestfish). Every operation runs in an isolated userspace appliance VM with
its own kernel, so the build touches no host block device, no host mount, and
needs no sudo — removing the failure class that wiped the host's /dev on shared
CI runners (a leaked /dev bind traversed by rm -rf).
Applies to all distros: alpine resizes via guestfish e2fsck+resize2fs, ubuntu
via virt-resize; customization (packages, binaries, files, setup script,
service enable, cache cleanup) is one ordered virt-customize invocation.
LIBGUESTFS_BACKEND=direct (no libvirt on runners).
Wire the eks-node AMI into the single-node e2e job: the runner builds the
device-free raw, ships it to the VM, and the VM imports it (predastore/NATS are
VM-only) so the eks suite's CreateCluster has an AMI to boot.
* feat(eks): bootstrap + state-report via AWS gateway broker
Converge the EKS control-plane → host channel onto the ELBv2 lb-agent model:
the K3s server VM publishes its bootstrap envelopes and periodic state reports
via SigV4-signed HTTPS POST to the AWS gateway, instead of dialing core NATS
directly. A new gateway action (PublishInternal, POST
/clusters/{name}/internal-publish) relays the payload verbatim onto the
existing eks.bus.* / eks.state.* subjects, so the daemon-side subscriber, KV
persistence/encryption, and reconciler are unchanged.
This removes the VM's need to reach NATS at all, so NATS can stay
cluster-internal behind its bind/firewall/mTLS controls — the prior direct
path broke when NATS was not VM-reachable (e2e CreateCluster timeout) and was
DDIL-fragile (fire-and-forget nats pub, no ack/retry).
- gateway/eks: PublishInternal broker + route; closed-set channel/kind validation
- cmd/eks-gateway-publish: one-shot SigV4 publisher (retry-until-ack) baked into
the eks-node AMI; replaces the nats-cli publisher in k3s-first-boot.sh and
mulga-eks-state-report.sh
- handlers/eks + daemon: hand the K3s server VM the mgmt-reachable gateway URL +
system (Predastore) SigV4 creds + gateway CA instead of NATS URL/token/CA;
new resolveSystemGatewayBaseURL (mgmt-bridge-first)
- eks-node image: build/install eks-gateway-publish, drop nats-cli download
* feat: migrate eks-token-webhook to the AWS gateway broker
The TokenReview webhook dialed core NATS directly (STS verify + AccessEntry
KV read). On a mgmt-only control-plane VM with NATS bound off-subnet that
fails, so the webhook exited at startup, the apiserver token-webhook
kubeconfig was never written, and the apiserver crash-looped — the cluster
never reached ACTIVE.
Converge it onto the same gateway-broker model as bootstrap/state-report and
ELBv2's lb-agent: the webhook SigV4-signs an HTTPS POST {accountId,token} to
/clusters/{name}/token-review, and the gateway runs the verify + lookup
host-side and returns the resolved identity. The VM now speaks no core NATS.
- internal/eksgw: shared on-VM SigV4 client (also adopted by
eks-gateway-publish).
- handlers/eks/token_review.go: Authenticate decision core (moved from the
webhook binary) + ResolveTokenReview host-side wiring.
- gateway/eks token-review route + WebhookTokenReview handler.
- webhook: drop NATS, relay via eksgw.Client; broker fault -> 503 (retryable)
not a silent deny.
- initd: export EKS_GATEWAY_* / EKS_ACCESS_* creds, not SPINIFEX_NATS_*.
* fix: build eks-node helpers with GOFIPS140; cover token-review broker
eks-gateway-publish blank-imports internal/fipsboot, whose init() panics
unless the binary is built with GOFIPS140=v1.0.0. The eks-node AMI build
omitted the flag, so the binary paniced at first boot right after k3s came
up — k3s-first-boot (set -eu) died before publishing the bootstrap token and
the cluster never reached ACTIVE. Build both eks-node helpers with
GOFIPS140=v1.0.0, matching cmd/lb-agent.
Add NATS-backed unit tests for ResolveTokenReview and the WebhookTokenReview
gateway handler (verify responder + account KV) to cover the new broker path.
* fix: export first-boot env so eks-gateway-publish child sees it
k3s-first-boot.sh and mulga-eks-state-report.sh sourced /etc/spinifex-eks/
first-boot.env but never exported the vars, so the eks-gateway-publish child
process inherited an empty environment and exited '--account-id is required'.
The control-plane VM came up healthy but never published its bootstrap
envelopes, so the cluster never reached ACTIVE. Wrap the source in set -a /
set +a so the KEY=value lines export to child processes.
* fix: make awsgw start --host override actually bind
The 'awsgw start --host' override printed 'Overwriting awsgw host' but the
assignment was commented out, so AWSGW always bound the spinifex.toml host
(a specific WAN IP, e.g. 192.168.0.10). A system instance (EKS K3s control
plane, internal LB agent) has a mgmt-only NIC on-link to the br-mgmt IP with
no route to the WAN IP, so its SigV4 POSTs to the gateway were refused and the
cluster never bootstrapped. Honour --host (e2e passes 0.0.0.0:9999) so AWSGW
listens on all interfaces incl. br-mgmt; the serving cert already SANs every
local interface IP, and WAN clients still reach it.
* test(eks): install kubectl on e2e VM so KubectlGetNodes runs
The eks data-plane subtest (TestEKS/KubectlGetNodes) drives the full
aws eks get-token -> kubectl -> apiserver -> token-webhook -> gateway broker
-> STS verify path — the only end-to-end exercise of the token-review broker.
The e2e binaries run on the VM, where kubectl was absent, so
harness.NewKubectl t.Skip'd it and the path went unvalidated. Install a
checksum-verified kubectl (pinned to the k3s server version) on the VM,
gated on e2e-eks.
|