mirror of
https://github.com/mulgadc/spinifex.git
synced 2026-10-15 17:11:30 +00:00
main
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Julian Sommer
|
65d2501e6b | feat: add MariaDB as the second RDS engine (#762) | ||
|
Ben Duncan
|
28a876d17d | feat(dns): resolvable ALB/NLB + EKS DNS, forwarder hardening, cross-tenant reconcile (#532) | ||
|
Julian Sommer
|
fa066a64d7 | fix | ||
|
Julian Sommer
|
50b5495d26 | chore: more comment cleanup | ||
|
Josh Siviour
|
bedc35344f |
feat(e2e/multinode) (#242)
* feat(e2e/harness): multinode cluster wait helpers + AWSClientForGateway (Stage A)
Stage A of mulga-siv-90. Compile-only; no tests wired yet.
multinode_cluster.go:
- Cluster.WaitNATSPeers polls /routez per node, dedupes by remote_id.
want=2 on healthy 3-node, =1 after a node-down event.
- Cluster.WaitPredastoreHealthy / WaitGatewayHealthy probe HTTPS per node
via insecureHTTPClient (multinode certs are self-signed across peers).
- Cluster.WaitDaemonReady runs DescribeInstanceTypes through every
node's gateway, not just env.ServiceIPs[0] — catches a daemon that's
only registered on one node.
multinode_aws_via.go:
- AWSClientForGateway clones *Env, swaps ServiceIPs to a single node's
Addr, returns a fresh AWSClient. Lets phases 6/7 issue describe/
stop/start across every node in turn (bash aws_via equivalent).
Init/Join helpers deferred to the pseudo-multinode bead (mulga-siv-91)
where they belong — real-multinode bootstrap is owned by tofu +
bootstrap-install.sh before the Go suite starts.
* feat(e2e/multinode): TestMultinodePreflight + TestMultinodeClusterHealth (Stage B)
Stage B of mulga-siv-90. First runnable Test* against a 3-node cluster.
multinode/main_test.go:
- Package-scoped singleton fixture, mirrors single/main_test.go.
- requireMultiNodeFixture skips when SPINIFEX_E2E unset or mode != multinode.
- Fixture = {Env, AWS, Harness, Cluster, Artifacts, TmpDir} — adds Cluster
to the single-node shape via harness.ClusterFromEnv (reads SPINIFEX_NODES
+ SPINIFEX_SSH_USER/KEY).
- TestMain drains harness.Fixture.Close + removes TmpDir at process exit.
multinode/helpers_test.go:
- needAZ / needInstanceTypeArch / needAMI shims (memoized via harness).
- readyNodeCount substring counter — matches bash `grep -c "Ready"`.
multinode/tests_test.go:
- Top-level Test* wrappers (TestMultinodePreflight, TestMultinodeClusterHealth).
multinode/preflight_test.go (phase 1):
- /dev/kvm writable check (no /dev/kvm = test environment is wrong, fail fast).
- peer_ssh hostname on every remote node. Skips node[0] to match bash —
the runner's loopback SSHd is not part of the contract.
multinode/cluster_health_test.go (phase 2):
- Cluster.WaitNATSPeers >= 2 per node.
- Cluster.WaitPredastoreHealthy / WaitGatewayHealthy across nodes.
- Cluster.WaitDaemonReady (DescribeInstanceTypes per gateway).
- spx get nodes shows N Ready, where N = cluster size.
- spx get vms returns (length only — content may be empty).
* feat(e2e/multinode): TestMultinodeInstanceDistribution + GuestSSH (Stage C)
Stage C of mulga-siv-90. Phase 3 (distribution) + phase 4 (guest SSH).
harness/multinode_distribution.go:
- InstanceHostingNode: SSH each peer, ps grep qemu-system | <id>.
Reuses NewPeerSSH; returns nil on no match (caller decides fatality).
- CountInstancesPerNode + AssertSpreadAcrossNodes: fan-out + minNodes
gate. Bash phase 3 warns-on-stacking; Go matches by accepting
minNodes=1 + caller-side log.
harness/multinode_guest_ssh.go:
- GuestSSHPort polls hosting node's qemu cmdline for hostfwd=tcp:...
reusing the existing hostfwdRE from ec2helpers.go (single regex, two
capture groups: host + port).
- GuestSSHEndpoint prefers PublicIpAddress, falls back to hosting-node
+ hostfwd. Mirrors the phase 4 conditional.
- GuestSSHReady polls `echo ready` via SSH with bash-equivalent -o flags.
multinode/helpers_test.go:
- needKeyPair (EnsureKeyPair shim).
- needInstanceTrio: pkg-level sync.Once launches 3 nano instances on
default VPC, registers terminate-on-process-exit. Phase 4+ reuse the
same trio without re-launch.
multinode/distribution_test.go (phase 3):
- launch trio + assert >= 1 node hosting (log warn on stacking).
- spx get vms contains every trio ID.
multinode/guest_ssh_test.go (phase 4):
- For each trio instance: resolve endpoint, poll SSH ready, assert id
reports ec2-user, log lsblk line count.
multinode/tests_test.go: TestMultinodeInstanceDistribution + TestMultinodeGuestSSH.
* feat(e2e/multinode): TestMultinode{Volume,CrossNodeGateway,CrossNodeOps} (Stage D)
Stage D of mulga-siv-90. Phases 5/6/7 — pure AWS API exercise (no
node-state churn).
volume_test.go (phase 5):
- Create 10GiB volume in discovered AZ, attach to trio[0] at /dev/sdf,
detach, delete. Inline lifecycle — DeleteVolume in-test would race a
registered Ensure* cleanup, surface as InvalidVolume.NotFound.
gateway_test.go (phase 6):
- Baseline DescribeInstances via the local gateway, then fan out
AWSClientForGateway per non-local node. Require.Equal across all —
cross-node fan-out regression surfaces immediately.
crossnode_ops_test.go (phase 7):
- Find trio[0]'s hosting node, stop via a different gateway, start via
a third (or same other on 2-node fallback). Returns to running so
later Test*s (phase 4 SSH, etc.) don't cascade-fail. otherTwoGateways
mirrors the bash fallback chain.
* feat(e2e/multinode): TestMultinodeNode{Failure,Recovery} (Stage E)
Stage E of mulga-siv-90. Phase 8 (failure) + phase 9 (recovery) +
diagnostic primitives.
harness/multinode_node_lifecycle.go:
- StopNode SSHes `sudo systemctl stop spinifex.target`. Non-fatal on
exit error (bash matches — cluster shutdown races the SSH conn).
- StartNode mirrors with sudo systemctl start.
- WaitNodeServiceReady polls a single node's HTTPS gateway. Distinct
from cluster-wide WaitGatewayHealthy so a recovering node can be
tracked without re-checking peers.
harness/multinode_diag.go:
- DumpAllNodeLogs fans out journalctl -u 'spinifex-*' per node into
artifactsDir/journal-<node>.log. Tolerates per-node SSH failure.
- SpxGetNodesAcrossCluster strips trailing whitespace off SpxGetNodes.
multinode/node_failure_test.go (phase 8):
- Stop node2, register t.Cleanup restart safety net.
- WaitNATSPeers want=1 (degraded), DescribeInstanceTypes via node1+node3,
DescribeInstances still returns the trio.
multinode/node_recovery_test.go (phase 9):
- StartNode node2 (idempotent — phase 9 in isolation still works).
- WaitNATSPeers want=2, WaitNodeServiceReady, spx get nodes 3 Ready,
DescribeInstanceTypes via the recovered gateway.
* feat(e2e/multinode): TestMultinodeVPCNetworking (Stage F)
Ports phase 10 from run-multinode-e2e.sh. Stands up a fresh non-default
VPC + subnet (10.200.0.0/16 + 10.200.1.0/24), launches 3 instances into
the subnet, then asserts:
- PrivateIpAddress is non-empty and matches 10.200.1.0/24
- All 3 IPs are unique
- SubnetId / VpcId on the instance match the freshly-created ids
- IPs persist across stop -> start cycles
Independent of the package-level trio (which uses the default VPC) —
this phase needs full control over subnet allocation so resources are
created and cleaned up inline via t.Cleanup (LIFO: instances ->
subnet -> VPC).
* feat(e2e/multinode): TestMultinodePlacementAndNAT (Stage G)
Ports phase 11 from run-multinode-e2e.sh — the largest single phase
(~340 bash lines covering spread placement + NAT Gateway egress). Eight
sub-steps preserved with matching harness.Step markers so the Go run
cross-references cleanly with the bash log:
Step 1: VPC + pub/priv subnets + IGW + main RT route + 2 SGs
(bastion: tcp/22 anywhere; private: tcp/22 from bastion-sg,
icmp from VPC)
Step 2: bastion launch, wait SSH, scp key
Step 3: spread placement group + 3 private instances via the group
Step 4: validate spread (>=2 unique hosting nodes; >=3 = full PASS)
Step 5: pre-NAT baseline — confirm NO internet from private VMs
Step 6: allocate EIP + create NAT GW + private RT + 0.0.0.0/0 -> NGW
Step 7: post-NAT — every private VM reaches 8.8.8.8 via NAT GW
Step 8: inline teardown of NAT GW + private RT + EIP
Each resource is owned by the test (no Ensure* memoization) so a failure
mid-flight tears the full VPC graph down via t.Cleanup in LIFO order,
matching the bash teardown sequence. NAT GW state polling is duplicated
locally (waitForNATGatewayStateFatal/Best); the equivalents in
single/natgw_test.go are unexported. Promote to harness/poll.go once a
third consumer lands.
* ci(e2e-go): add multi-node Go E2E job + cert/lb on 3-node cluster (Stage H)
Adds e2e_go_multinode as a parallel job alongside e2e_go_single on the
e2e-go workflow. The single-node job is untouched apart from extending
its SUITES filter to drop the multinode suite (which only runs on the
ci-multi cluster).
What the new job does:
- Provisions a 3-node tofu cluster via the same build-install-artifacts
+ bootstrap-install path as e2e_real_multi (bash).
- Builds multinode.test / cert.test / lb.test on the runner, ships
them to node1.
- Runs each suite with SPINIFEX_MODE=multinode and the cluster csv
in SPINIFEX_NODES / SPINIFEX_NODE_IPS. cert / lb branch internally
on env.Mode so the same binaries cover both single + multi.
- Pulls per-node journals (spinifex-journal-node1..N.log) for the
e2e-analyze action so a node2/3 failure isn't blind.
- Same JUnit + analyze + artifact-upload + status pipeline as the
single-node job.
Other moves:
- Default SUITES now includes e2e-multinode so push triggers fan
out across single + multi automatically. e2e_go_reboot stays
explicit-opt-in (unchanged).
- tests/e2e/Makefile: e2e-multinode now sets MODE=multinode so
`make e2e-multinode` doesn't fall back to single (which would
skip every TestMultinode* on the SPINIFEX_MODE check).
- tests/e2e/TEST_COVERAGE.md: cross-reference the Go port at the
head of the Real Multi-Node section. The bash driver stays in
place as executable spec until the Go run is soak-tested.
- e2e_go_status now needs e2e_go_multinode; multi=skipped counts
as success so a single-only dispatch still posts green.
* fix(e2e/multinode): NATS routez via peer_ssh + StartNode timeout + spx best-effort
CI run 26161792146 surfaced three regressions in the freshly-landed
multinode suite:
1. WaitNATSPeers dialled node.Addr:8222 directly. NATS monitor binds
127.0.0.1:8222 only (cmd/spinifex/cmd/templates/nats.conf:65), so
every routez poll returned "connection refused". Switched to
peer_ssh + curl http://127.0.0.1:8222/routez per node — matches
the bash run-multinode-e2e.sh phase 2 pattern.
2. StartNode / StopNode capped ssh at a 30s context. spinifex.target
has 6+ dependent units (predastore, NATS, awsgw, vpcd, daemon, ui)
and a clean systemctl start runs 60-90s; the 30s budget was
killing ssh mid-command ("signal: killed"). Bump StartNode to 5min
and StopNode to 3min.
3. SpxGetVMs is best-effort in bash (`spx get vms --timeout 5s
2>/dev/null` with no exit-code check) because the CLI's NATS dial
can race the cluster join shortly after bootstrap. The Go port
fatal'd on non-zero exit and broke TestMultinodeClusterHealth +
TestMultinodeInstanceDistribution downstream. Added
harness.SpxRunBestEffort and rewired both call sites.
* fix(e2e/multinode): spx CLI lenience + trio capacity retry + diag
Run 26163994815 cascaded from two issues that bash silently tolerated.
The Go port hard-failed where bash counts the failure and continues, so
3+ tests cascaded off transient first-failures.
- spx get nodes: cluster_health + node_recovery now downgrade <Ready
count to WARN with SpxRunBestEffort, matching bash phase 2
fail_test counter and phase 9 `|| echo ""`. Gateway+daemon health
checks above already prove end-to-end NATS routing.
- needInstanceTrio: retry RunInstances up to 6× on
InsufficientInstanceCapacity (10s backoff). Daemon resourceMgr can
briefly report 0 capacity right after node bootstrap before its
first inventory scan completes — AWS itself surfaces this
transiently. Stagger 2s between launches to match bash phase 3.
- CI workflow: new "Pre-flight diagnostics on node1" step dumps
groups/perms/spx output/systemctl status/journal tail to
preflight-diag.log so next run's artifacts surface what tf-user
sees before the test binary starts.
* fix(e2e): strip SPINIFEX_* from spx child env
Root cause of `spx get nodes` returning "nats: no servers available for
connection" in the multinode Go suite (mulga-siv-90 runs 26163994815,
26195522455): spx CLI calls viper.AutomaticEnv() with prefix "SPINIFEX"
inside config.LoadConfig. The CI workflow exports SPINIFEX_NODES (csv
of cluster WAN IPs) so harness.ClusterFromEnv can build the *Cluster.
viper picks SPINIFEX_NODES up as the `nodes` config key and silently
clobbers the loaded `[nodes.*]` map → nodeConfig.NATS.Host = "" →
nats.Connect("") → ErrNoServers.
Bash never set SPINIFEX_NODES so the bash port was unaffected. Direct
ssh `spx get nodes` from the runner also worked because the env was
clean. Only the test-binary-spawned spx hit the collision.
Fix: SpxRun / SpxRunBestEffort build a sanitized child env that
preserves the small SPINIFEX_* set spx's root command explicitly
BindEnvs (config path, AWS keys, host, base-dir, NATS dial overrides)
and drops everything else.
* fix(vpcd): make handleAddNAT idempotent (mulga-siv-124)
PR #232 (commit
|