From 6ec2f4bd08c6ddc27e1529dcc617aa0d7262263c Mon Sep 17 00:00:00 2001 From: Julian Sommer <115516918+juliansommer@users.noreply.github.com> Date: Thu, 30 Apr 2026 14:32:56 +1000 Subject: [PATCH] fix: usb install doc formatting --- docs/getting-started/install-usb/README.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/docs/getting-started/install-usb/README.md b/docs/getting-started/install-usb/README.md index 568e34cad..25f48b920 100644 --- a/docs/getting-started/install-usb/README.md +++ b/docs/getting-started/install-usb/README.md @@ -1,5 +1,5 @@ --- -title: "Install from Bootable USB" +title: "Bootable USB Install" description: "Install Spinifex on bare-metal hardware by flashing the Spinifex ISO to a USB drive and booting the target device from it." category: "Getting Started" sections: @@ -27,27 +27,27 @@ resources: Spinifex is designed for bare-metal hardware, edge nodes and data-centre use. Follow this guide to install Spinifex from a bootable USB using the Spinifex ISO. -> **Note:** this tutorial is for x86 architecture. +**Note:** this tutorial is for x86 architecture. -> **Also note:** This procedure COMPLETELY WIPES the target disk. For systems with multiple disks, ensure the correct one is targeted. +**Warning:** this procedure COMPLETELY WIPES the target disk. For systems with multiple disks, ensure the correct one is targeted. ### Booting Media For this tutorial, a USB drive with at least 8GB of memory is required. -> **Note:** Flashing the Spinifex ISO onto the USB completely wipes the USB, so ensure no important data is stored on the USB used. +**Note:** flashing the Spinifex ISO onto the USB completely wipes the USB, so ensure no important data is stored on the USB used. ### Balena Etcher Installation For this tutorial download Balena Etcher to simplify the ISO flash process. -* [Balena Etcher](https://etcher.balena.io) +- [Balena Etcher](https://etcher.balena.io) ### Download Spinifex ISO Download the Spinifex ISO (x86) -* [Spinifex ISO](https://iso.mulgadc.com/spinifex.iso) +- [Spinifex ISO](https://iso.mulgadc.com/spinifex.iso) ### Flash Media @@ -99,8 +99,8 @@ Once the USB drive is removed, press enter or wait for the auto-reboot. The device will reboot and spend ~2-5 minutes configuring the Spinifex node. The user will then be prompted to log in. Use the following credentials for login: -* Login: `spinifex` -* Password: Set by user during installation +- Login: `spinifex` +- Password: Set by user during installation Both before and after login, a banner will be printed specifying important information, such as details for SSH into the node and accessing the web dashboard for further configuration of the node. @@ -132,4 +132,4 @@ The VM itself never talks to the router's DHCP — it only sees its private VPC **Use when:** You don't control a static IP block but the router's DHCP server has enough leases. Homelabs where you don't want to carve out a range. Environments where IPs are managed centrally by the network team's DHCP. -For further troubleshooting suggestions, refer to the [VPC networking](/docs/vpc-networking) guide. +For further troubleshooting suggestions, refer to the [VPC Networking](/docs/vpc-networking) guide.