sencho/docs/getting-started/configuration.mdx

---
title: Configuration
description: Environment variables, volume mounts, and the 1:1 path rule.
---

Sencho is configured entirely through environment variables and Docker volume mounts. There is no config file to edit inside the container.

## Required environment variables

| Variable | Description |
|----------|-------------|
| `COMPOSE_DIR` | Absolute path to the directory that contains your Compose stacks. Every subdirectory inside becomes a stack in Sencho. Falls back to `/app/compose` if unset, but per the [1:1 path rule](#compose-directory-the-11-path-rule) you should always set this explicitly to match the host path you mount. |

<Note>
  **JWT_SECRET is generated automatically.** Sencho creates a secure random signing key during initial setup and stores it in its database. You do not need to provide one.
</Note>

### How Sencho organizes your compose directory

When you point `COMPOSE_DIR` at a directory, Sencho expects each stack to live in its own subdirectory. If you create a stack through the UI, Sencho automatically creates a subfolder and places a blank `compose.yaml` inside it. Sencho does not move or "capture" existing files; it simply treats every subdirectory as a separate stack.

## Optional environment variables

| Variable | Default | Description |
|----------|---------|-------------|
| `DATA_DIR` | `/app/data` | Directory where Sencho stores its SQLite database, node registry, and cached metrics. |
| `FRONTEND_URL` | *(empty)* | Frontend origin for CORS. Only needed if the UI is served from a different domain than the API. Leave empty for same-origin setups. |
| `NODE_ENV` | `production` | Set automatically in the Docker image. Only change this for local development. |
| `SENCHO_USER` | *(unset)* | When set to a username present inside the container (`sencho` is pre-created for this purpose), the entrypoint drops privileges to that user at startup instead of running as `root`. See [Running as a non-root user](#running-as-a-non-root-user) below. |
| `API_RATE_LIMIT` | `200` | Global API requests per minute per user session. Applies in production only; development uses a fixed higher cap. Authenticated requests are keyed by user ID, unauthenticated by IP. Internal node-to-node traffic bypasses this limit. |
| `API_POLLING_RATE_LIMIT` | `300` | Rate limit for dashboard polling endpoints, in requests per minute. Applies in production only; development uses a fixed higher cap. Raise it for environments with many concurrent browser sessions behind shared NAT. |

## Listen port

Sencho always listens on `1852` inside the container. The port is fixed and is not read from an environment variable. To expose Sencho on a different host port, remap with Docker's `-p` flag (or the `ports:` key in your compose file):

```yaml
ports:
  - "8080:1852"   # host 8080 to container 1852
```

Behind a reverse proxy you can keep the standard mapping and let the proxy own the public port.

## Container user

Sencho runs as `root` inside the container by default, matching Portainer, Dockge, Komodo, and Yacht. This is required so Sencho can always write to your compose folders, even when a stack container (commonly anything from `linuxserver/*`) has chowned its own bind mount to another UID. Mounting `/var/run/docker.sock` already grants root-equivalent access to the host, so running the Sencho process itself as root does not change the effective privilege boundary.

**What this means for you:**

- Files Sencho creates inside your compose directory (new stacks, edited `compose.yaml`, generated `.env` files) will be owned by `root` on the host. If you edit those files outside Sencho using your own editor, you will need `sudo` or a one-time `chown`.
- The `/app/data` directory is internal to Sencho; its ownership does not matter for host-side tooling.

### Running as a non-root user

If organisational policy, compliance scanners, or a rootless Docker setup requires the container to drop privileges, set `SENCHO_USER=sencho` in the environment. The entrypoint will chown `/app/data` to the sencho user, match the host's Docker socket group, and exec Node under that user.

```yaml
services:
  sencho:
    image: saelix/sencho:latest
    environment:
      - COMPOSE_DIR=/opt/compose
      - SENCHO_USER=sencho          # opt into non-root mode
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock
      - /opt/compose:/opt/compose
      - ./sencho-data:/app/data
```

<Warning>
  Non-root mode can cause filesystem write failures for any stack whose compose folder is owned by a UID other than `sencho`. If you hit "Failed to save stack" or similar errors after opting in, either `chown` the affected stack folder to the sencho user inside the container, or unset `SENCHO_USER` to return to the default (root) mode.
</Warning>

## SSO environment variables

If you use SSO, configure your identity providers via environment variables:

| Variable | Description |
|----------|-------------|
| `SSO_LDAP_ENABLED` | Enable LDAP/AD authentication |
| `SSO_OIDC_GOOGLE_ENABLED` | Enable Google SSO |
| `SSO_OIDC_GITHUB_ENABLED` | Enable GitHub SSO |
| `SSO_OIDC_OKTA_ENABLED` | Enable Okta SSO |
| `SSO_CALLBACK_URL` | External base URL for OAuth callbacks (required behind reverse proxy) |

For end-to-end provider setup walkthroughs, see the [SSO Quickstart →](/getting-started/sso-quickstart). For the full feature reference, see [SSO Authentication →](/features/sso).

## Required volume mounts

### Docker socket

Sencho needs access to the Docker daemon to manage containers:

```yaml
volumes:
  - /var/run/docker.sock:/var/run/docker.sock
```

### Data directory

Sencho's database persists all your settings, nodes, alerts, and metrics history. Mount a named volume or host path so it survives container restarts:

```yaml
volumes:
  - ./sencho-data:/app/data
```

<Warning>
  Without a persistent data mount, Sencho will lose all configuration (including registered nodes, alerts, and settings) every time the container restarts.
</Warning>

### Compose directory - the 1:1 path rule

<Warning>
  This is the most common source of deployment problems. Read carefully.
</Warning>

When Sencho runs `docker compose up`, it does so on your **host machine**. Docker resolves relative volume paths in your Compose files relative to the **host** path of the stack directory, not the path inside the Sencho container.

**The rule:** Mount your Compose directory at the **exact same path** inside the container as it exists on your host.

```yaml
# ✅ Correct - host path matches container path
volumes:
  - /home/user/docker:/home/user/docker
environment:
  - COMPOSE_DIR=/home/user/docker
```

```yaml
# ❌ Wrong - paths differ, relative volumes will break
volumes:
  - /home/user/docker:/app/compose
environment:
  - COMPOSE_DIR=/app/compose
```

If you use a simple path like `/opt/compose` on your host, mount it at `/opt/compose` in the container:

```yaml
volumes:
  - /opt/compose:/opt/compose
environment:
  - COMPOSE_DIR=/opt/compose
```

## Full docker-compose.yml example

```yaml
services:
  sencho:
    image: saelix/sencho:latest
    restart: unless-stopped
    ports:
      - "1852:1852"
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock
      - ./sencho-data:/app/data
      - /opt/compose:/opt/compose          # 1:1 path rule
    environment:
      - COMPOSE_DIR=/opt/compose
      - DATA_DIR=/app/data
```

## Optional: global environment file

If your Compose stacks share common variables (e.g. `PUID`, `PGID`, `TZ`), you can pass an `env_file` to the Sencho container so those variables are available in the host environment when `docker compose` runs:

```yaml
services:
  sencho:
    image: saelix/sencho:latest
    env_file:
      - /opt/compose/globals.env          # shared vars for all stacks
    environment:
      - COMPOSE_DIR=/opt/compose
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock
      - /opt/compose:/opt/compose
      - ./sencho-data:/app/data
```

## Reverse proxy setup

Sencho works behind any reverse proxy. The only requirement is that WebSocket connections are forwarded correctly (used for live logs, container terminals, and the host console).

### Nginx

```nginx
server {
    listen 80;
    server_name sencho.yourdomain.com;

    location / {
        proxy_pass http://localhost:1852;
        proxy_http_version 1.1;

        # WebSocket support
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";

        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_read_timeout 3600s;
    }
}
```

### Nginx with SSL (Let's Encrypt)

```nginx
server {
    listen 80;
    server_name sencho.yourdomain.com;
    return 301 https://$host$request_uri;
}

server {
    listen 443 ssl;
    server_name sencho.yourdomain.com;

    ssl_certificate /etc/letsencrypt/live/sencho.yourdomain.com/fullchain.pem;
    ssl_certificate_key /etc/letsencrypt/live/sencho.yourdomain.com/privkey.pem;

    location / {
        proxy_pass http://localhost:1852;
        proxy_http_version 1.1;

        # WebSocket support
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";

        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
        proxy_read_timeout 3600s;
    }
}
```

Use [Certbot](https://certbot.eff.org/) to obtain and auto-renew certificates: `certbot --nginx -d sencho.yourdomain.com`.

### Traefik (Docker labels)

```yaml
labels:
  - "traefik.enable=true"
  - "traefik.http.routers.sencho.rule=Host(`sencho.yourdomain.com`)"
  - "traefik.http.services.sencho.loadbalancer.server.port=1852"
```

### Traefik with SSL (Let's Encrypt)

```yaml
labels:
  - "traefik.enable=true"
  - "traefik.http.routers.sencho.rule=Host(`sencho.yourdomain.com`)"
  - "traefik.http.routers.sencho.entrypoints=websecure"
  - "traefik.http.routers.sencho.tls.certresolver=letsencrypt"
  - "traefik.http.services.sencho.loadbalancer.server.port=1852"
  # HTTP to HTTPS redirect
  - "traefik.http.routers.sencho-http.rule=Host(`sencho.yourdomain.com`)"
  - "traefik.http.routers.sencho-http.entrypoints=web"
  - "traefik.http.routers.sencho-http.middlewares=redirect-to-https"
  - "traefik.http.middlewares.redirect-to-https.redirectscheme.scheme=https"
```

<Note>
  Traefik handles WebSocket upgrades automatically for HTTP/1.1 backends. No extra configuration needed.
</Note>

### Caddy

```
sencho.yourdomain.com {
    reverse_proxy localhost:1852
}
```

Caddy automatically obtains and renews SSL certificates via Let's Encrypt. WebSocket connections are forwarded without additional configuration.

## First boot

After starting Sencho, open `http://localhost:1852` in a browser. On a fresh install you land on the **Cold start** card to create the first admin account; every subsequent visit goes to the regular sign-in screen. The [Quickstart](/getting-started/quickstart#first-boot) shows it in detail.

## Where to next

<CardGroup cols={2}>
  <Card title="Stack management" icon="layer-group" href="/features/stack-management">
    Deploy, edit, restart, update, and roll back stacks from the cockpit.
  </Card>
  <Card title="Multi-node" icon="sitemap" href="/features/multi-node">
    Add a remote Sencho instance and manage it from the same console.
  </Card>
  <Card title="Self-hosting" icon="server" href="/operations/self-hosting">
    Resource recommendations, networking, and Docker socket security.
  </Card>
  <Card title="SSO Quickstart" icon="key" href="/getting-started/sso-quickstart">
    End-to-end provider setup for OIDC, LDAP, and Active Directory.
  </Card>
</CardGroup>