---
title: "Blueprints"
description: "Fleet-wide compose templates that Sencho keeps in sync across the nodes you choose, with stateless or stateful classification, drift detection, and three response modes."
---

A **Blueprint** bundles a `docker-compose.yml` with a node selector and a drift policy. Every minute Sencho compares the live state on each targeted node against the blueprint's desired revision, and either reports the drift, dispatches a notification, or auto-corrects, depending on the mode you picked. You declare a stack once; Sencho handles the distribution and the reconciliation loop.

Blueprints live under **Fleet · Deployments**.

<Note>
  Blueprints are available on every tier as Sencho's Compose-first orchestration model. Creating, editing, withdrawing, and applying blueprints requires an admin role; operators and viewers can read the catalog and the detail sheet. Pinning a blueprint to a specific node lives under **Fleet · Federation** on every tier (admin role required).
</Note>

<Frame caption="Fleet · Deployments catalog with blueprint tiles, the All / Drifted / Observe / Suggest / Enforce filter chips, and the New Blueprint action in the top-right.">
  <img src="/images/blueprint-model/catalog.png" alt="Blueprint catalog in Fleet Deployments" />
</Frame>

## Mental model

Three moving parts cooperate per blueprint.

1. **The declared spec.** A blueprint is a row in Sencho's database. It carries the compose YAML, the selector (labels or explicit node IDs), the drift policy, and a monotonic revision number. The revision auto-increments every time the compose changes.
2. **The reconciler.** A background loop on the controlling Sencho ticks every 60 seconds (with a 5-second initial delay after startup) and on demand after **Confirm Apply**. Each tick only mutates the fleet when the blueprint's current operational intent is approved. The tick resolves the selector, compares every desired-vs-live node, and runs only the place or remove outcomes the operator already confirmed.
3. **The executor.** Per-node deploy and withdraw run against the local Docker socket on local nodes, and through the standard authenticated proxy to `/api/stacks` on remote nodes. Every blueprint deployment writes a `.blueprint.json` marker into the stack directory; the marker carries the blueprint ID, the revision, and the last-applied timestamp.

The marker is the trust root. If a directory by the blueprint's name already exists on a node and does not carry a matching marker, the reconciler refuses to touch it and surfaces a **Name conflict** on the deployment row. A Blueprint named `nginx` will never overwrite an existing user-authored `nginx` stack on any node.

Statelessness vs statefulness is decided at author time by parsing the compose file. Stateless blueprints (no persistent volumes, or only `tmpfs` mounts) deploy and evict freely. Stateful blueprints (named volumes or bind mounts) get explicit operator-confirmation prompts on the first deploy to a fresh node and on eviction from any node. Blueprints with `external: true` volumes are classified as **unknown** and treated as stateful for safety.

Drift detection runs on every tick for every Active deployment regardless of policy. The policy only governs what Sencho does next: surface the drift silently, notify, or auto-redeploy.

## Key capabilities

**One declaration covers many nodes.** Pick nodes by label or by node ID. The selector set is re-resolved on every reconciliation tick. When a new node matches after a label change, the catalog shows **reapproval required** until you confirm the updated blast radius. Removing a label, removing a node, or shrinking the selector likewise needs confirmation before withdraw outcomes run (subject to the stateful-eviction safety rail).

**Drift detection always on.** Each tick compares the marker's revision against the live containers and the blueprint's current revision, then checks that all containers labeled with the compose project name are running. Drift is recorded on the deployment row whatever the policy is. **Observe** records it silently, **Suggest** also dispatches a notification, **Enforce** also redeploys.

**Stateful safety rails.** Stateful and state-unknown blueprints enter **Awaiting confirmation** on every fresh node before the first deploy, and **Evict blocked** when a node falls out of the selector while still hosting a stateful deployment. The reconciler never deploys empty volumes or destroys named volumes without a human acknowledging the action.

**Pin override and cordon respect.** Admins can pin a blueprint to a single node from **Fleet · Federation**. A pin replaces the selector entirely, deploys only to the pinned node, and overrides the cordon flag on that node. Cordoning a node otherwise prevents the reconciler from picking it for new placements; existing deployments on a cordoned node keep running and stay drift-checked.

**Vulnerability-policy participation.** Local blueprint deploys evaluate against the same pre-deploy policy gate that the per-stack deploy lane uses. If an enabled policy blocks one of the blueprint's image references, the deployment row moves to **Failed** and the stack is never written to disk. Remote blueprint deploys are routed through the remote node's stack deploy endpoint, so policy enforcement runs on the remote instance with that node's credentials and scanner state.

**Per-node, per-revision marker ownership.** Every blueprint deployment writes a `.blueprint.json` marker carrying the blueprint ID, revision, and last-applied timestamp. The reconciler refuses to touch any directory whose marker does not match its blueprint ID, so user-authored stacks and other blueprints can coexist on the same node without collision.

## Prerequisites

| Requirement | Detail |
|---|---|
| License tier | **Community** to read, create, edit, withdraw, apply, and pin blueprints. |
| User role | **Admin** to create, edit, withdraw, accept, and apply. Operators and viewers can read the catalog and the detail sheet. Pinning requires admin. |
| Nodes | At least one node that the selector resolves to. Remote nodes need a healthy proxy connection; see [Multi-node management](/features/multi-node) and [Pilot Agent](/features/pilot-agent) for enrollment. |
| Compose YAML | Valid `docker-compose.yml`, 96 KiB or fewer. |
| Blueprint name | 1 to 64 characters matching `^[a-z0-9][a-z0-9_-]*$`. The name doubles as the stack directory on every targeted node. Rename is blocked while any non-withdrawn deployment or guard exists. |
| Selector | A `labels` or `nodes` selector with up to 200 entries per side. An empty resolved set is allowed but produces no deployments. |
| Compose directory | Per-node compose directory must be writable. Remote nodes must accept the controlling instance's bearer token; this is the same channel the rest of the fleet management already uses. |

## The catalog

The Deployments tab opens on a catalog of every blueprint configured on this instance. Each tile shows the name, an optional description, the classification chip (stateless, stateful, or unknown), the active-vs-targeted node count, and the current drift mode. Filter chips at the top break the catalog down by drift mode and let you isolate any tile that has drift.

<Frame caption="Catalog tiles. Each tile carries the classification chip, the active-over-targeted count, the selector summary, and the drift mode. The filter chips above the grid pivot the view.">
  <img src="/images/blueprint-model/catalog.png" alt="Deployments tab catalog with classification chips and filter chips" />
</Frame>

The first time you visit the tab, the catalog is empty and a three-step explainer walks you through Author, Target, and Reconcile, with a **Create your first Blueprint** button at the bottom.

<Frame caption="Empty Deployments tab. Three numbered cards (01 Author, 02 Target, 03 Reconcile) explain the model before you create the first blueprint.">
  <img src="/images/blueprint-model/empty-state.png" alt="Empty Deployments tab with three-step explainer" />
</Frame>

## Anatomy of a Blueprint

| Field | Purpose |
|---|---|
| **Name** | Used as the stack directory on every targeted node (`<COMPOSE_DIR>/<blueprint-name>/`). Lowercase letters, digits, hyphens, and underscores only. Rename is allowed only when every deployment is withdrawn (or there are none); live placements and guards block rename. |
| **Description** | Short prose for the catalog tile and the detail header. |
| **Compose** | Standard `docker-compose.yml`. The same file ships to every targeted node. Sencho parses it on save and classifies the blueprint as stateless, stateful, or unknown. The YAML must parse successfully and stay under 96 KiB. |
| **Selector** | Either label expressions (any-of plus all-of) or a list of node IDs picked by hand. |
| **Drift policy** | Observe, Suggest, or Enforce. Drift detection always runs; only the response differs. |
| **Reconciler enabled** | Toggle the reconciliation loop without deleting the blueprint. The **Disable** button on the detail sheet flips this toggle off; **Enable** turns it back on. Useful when you want to pause auto-deploys without losing the configuration. |

Sencho writes a `.blueprint.json` marker into each targeted node's stack directory. The marker carries the blueprint ID, revision, and the timestamp of the last apply. The reconciler refuses to touch any directory that does not carry a matching marker, so a Blueprint named `nginx` will never overwrite an existing user-authored `nginx` stack on any node. When the directory exists without a matching marker, the deployment row enters the **Name conflict** status until you rename one of the two.

Before a local Blueprint deploy starts, Sencho applies the same pre-deploy [vulnerability scan](/features/vulnerability-scanning) policy gate used by standard stack deploys. If an enabled policy blocks one of the Blueprint's image references, the deployment row moves to **Failed** and the stack is not written to disk. Successful local Blueprint deploys also trigger the normal post-deploy scan. Remote Blueprint deploys are routed through the remote node's stack deploy endpoint, so policy enforcement runs on the remote instance with that node's credentials and scanner state.

## The editor

**New Blueprint** opens a single editor dialog with everything inline: name and description fields, a Monaco YAML editor with the classification banner sitting above it, the selector picker (Labels or Specific nodes), the drift policy cards, and the Reconciler enabled toggle.

<Frame caption="The Blueprint editor. Compose YAML on the left with the classification banner pinned above it; selector mode tabs, drift policy cards, and the Reconciler enabled toggle below.">
  <img src="/images/blueprint-model/editor-dialog.png" alt="Blueprint editor dialog with classification banner, selector, and drift policy" />
</Frame>

### Classification banner

The banner above the YAML editor shows what Sencho found when it parsed your compose file:

- **Stateless · portable** when no persistent volumes were detected, or only `tmpfs` mounts. Sencho can deploy and evict the blueprint freely on any node.
- **Stateful · pins to data** when named volumes or bind mounts were detected. Each node holds its own data; Sencho does not replicate volumes between nodes.
- **State unknown** when `external: true` volumes were detected. Sencho cannot prove portability and treats the blueprint as stateful for safety.

Click the signals toggle on the right of the banner (`1 SIGNAL`, `2 SIGNALS`, etc.) to expand the list of reasons Sencho classified the way it did, line by line.

<Frame caption="The classification banner expanded. The signals list shows the exact rule that fired for each detected mount, volume, or external reference.">
  <img src="/images/blueprint-model/classification-banner.png" alt="Classification banner in the Stateless · portable variant with one signal expanded" />
</Frame>

### Selector

A **Labels** selector matches any node whose labels satisfy the expression. The picker is split into two pill rows: **Match nodes with ANY of these labels** (the OR set), and **AND ALSO require ALL of these** (the AND set). Either side may be empty. The dialog renders a one-line summary just below the pills, so you can see exactly which nodes the expression resolves to before you save.

A **Specific nodes** selector picks nodes by ID with a checkbox list. Use it when you want a one-off blueprint that runs only on a known node, or when no labels exist yet.

Add labels to nodes from **Settings · Infrastructure · Nodes**. Each node row carries a Labels column with a `+` button.

<Frame caption="Settings · Infrastructure · Nodes. The Labels column carries pills per node; the `+` button opens an inline add-label popover.">
  <img src="/images/blueprint-model/node-labels.png" alt="Settings Infrastructure Nodes page with the Labels column and add-label popover" />
</Frame>

### Drift policy

The three policy cards in the editor map exactly to the three modes the reconciler runs against every tick:

| Card label | Reconciler behavior |
|---|---|
| **Observe** · Detect & display, no notifications | Drift surfaces in the deployment table; no notification, no auto-fix. |
| **Suggest** · Detect & notify, operator decides | Sencho dispatches a `blueprint_drift_detected` notification through your notification routes, if any. |
| **Enforce** · Detect & auto-fix, silent on success | Sencho re-deploys the blueprint silently when drift is detected. A `blueprint_drift_correction_failed` notification fires only when the auto-fix attempt fails. |

Even **Observe** keeps Sencho honest about what it found: the deployment row shows "drifted 3h ago: service caddy exited code 1". Silence would forfeit Sencho's authority over your fleet.

For **stateful** blueprints under Enforce, Sencho declines auto-fixes that would destroy named volumes (for example, when you rename a volume in the compose). The drift downgrades to Suggest semantics for that event with the reason `auto-fix declined: would destroy volume data`.

## The detail sheet

Click any tile in the catalog to open the blueprint detail sheet on the right. The sheet header shows the name, the meta line (`<selector> · <drift mode> · rev <n>`), the action bar (Apply now, Edit, Disable, Delete), the description, the deployment table, and a collapsible compose source.

<Frame caption="The detail sheet. Header carries the selector and revision; the action bar offers Apply now, Edit, Disable, and Delete; the deployment table lists one row per resolved node.">
  <img src="/images/blueprint-model/detail-sheet.png" alt="Blueprint detail sheet showing header, action bar, and deployment table" />
</Frame>

The deployment table lists every node currently in the blueprint's resolved selector set. Each row carries the node name, the deployment status, the last-activity timestamp, a notes column (drift summary or the last error message), and the action available for that row.

Possible status values:

| Status | Meaning |
|---|---|
| **Pending** | The reconciler has acquired the deployment lock and is about to start. |
| **Awaiting confirmation** | A stateful blueprint reached a new node. The reconciler refuses to deploy until you click **Confirm deploy** in the action column. |
| **Deploying** | The compose action is in flight on this node. |
| **Active** | The container set matches the blueprint's revision. |
| **Drifted** | The reconciler detected a difference between the live state and the desired one. |
| **Correcting** | An Enforce-mode auto-fix is in flight. |
| **Failed** | The deployment or withdrawal errored. The notes column carries the message. |
| **Withdrawing** | A withdraw is in flight. |
| **Withdrawn** | The deployment was successfully removed; the row is about to be cleared. |
| **Evict blocked** | A node left the selector while a stateful deployment was active. The reconciler refuses to evict until you choose an explicit mode. |
| **Name conflict** | A directory by the blueprint's name already exists on the node and does not carry our marker file. The reconciler will not touch it. |

<Frame caption="A deployment row in Awaiting confirmation. The Confirm deploy action sits at the right; the notes column explains why the reconciler is waiting on the operator.">
  <img src="/images/blueprint-model/detail-state-review.png" alt="Blueprint detail sheet with a deployment row in Awaiting confirmation state" />
</Frame>

## Lifecycle: status transitions

The common paths through the status enum.

- **Stateless first deploy.** No row → **Pending** → **Deploying** → **Active**. Drift detected later on Enforce flips to **Drifted** → **Correcting** → **Active**.
- **Stateful first deploy.** No row → **Awaiting confirmation**. Operator clicks **Confirm deploy** and picks **Deploy fresh** → **Deploying** → **Active**.
- **Compose change on a stateless deployment.** **Active** → **Deploying** on the next tick → **Active**.
- **Compose change on a stateful or unknown deployment.** **Active** → **Awaiting confirmation** on every targeted node so the operator can decide whether the new revision is safe for that node's local data. Operator confirms → **Deploying** → **Active**.
- **Node leaves a stateless selector.** **Active** → **Withdrawing** → **Withdrawn** and the row clears.
- **Node leaves a stateful selector.** **Active** → **Evict blocked**. Operator chooses **Snapshot, then evict** or **Evict and destroy data** → **Withdrawing** → **Withdrawn**.
- **Pre-existing stack collision.** New row → **Name conflict**. No further action without operator rename of the user-authored stack or of the blueprint itself.
- **Deploy or withdraw error.** Any in-flight status → **Failed** with the message in the notes column. The row stays put until the next tick or until the operator clicks **Apply now** to retry.

## Working with Blueprints

### Create

1. Go to **Fleet · Deployments**.
2. Click **New Blueprint**.
3. Fill in the name, description, compose YAML, selector, and drift policy.
4. Watch the classification banner update as you type. It tells you whether the blueprint is portable or pinned to data.
5. Click **Create blueprint**. The blueprint starts with approval **pending**. No fleet mutation runs until you confirm a rollout preview.

If the YAML is malformed or larger than 96 KiB, Sencho rejects the save before creating a Blueprint row.

### Apply on demand

The reconciler runs every minute, but only for blueprints whose current operational intent is **approved**. To authorize or re-authorize a rollout, click **Apply now** on the detail sheet (or **Retry** on a failed row). Sencho opens a rollout preview that lists place and remove outcomes, requirements, and health notes. **Confirm Apply** stores that approval and runs the confirmed executor actions. If some nodes fail (for example a remote host is unreachable) or an unmanaged same-name stack blocks placement, Confirm still records approval, but the response and toast report those per-node outcomes instead of a clean success. Changing the compose, selector, name, pin, drift mode, or enabled flag clears approval back to pending. Catalog tiles show **pending** or **reapproval required** when confirmation is needed again (for example after a label change adds a new target node).

Raw `POST /api/blueprints/:id/apply` clients must send `{ planFingerprint, actions }` from a fresh `GET .../preview`. A body without that confirmation is rejected.

### Edit

Click **Edit** on the detail sheet. Editing the compose bumps the revision. Stateless blueprints redeploy on the next reconciliation tick. Stateful and state-unknown blueprints re-enter **Awaiting confirmation** on every targeted node so the operator can decide whether the new revision is safe for each node's local data. Stateful blueprints also follow the volume-destroying-drift rule under Enforce: a compose change that would destroy named volumes downgrades to Suggest for that event.

### Confirm a stateful first deploy

The first time a stateful blueprint reaches a node, the deployment row enters **Awaiting confirmation**. Click **Confirm deploy** in the action column to open the state review dialog. **Deploy fresh** creates empty named volumes on the target node and starts the stack with the default state from each container image. **Restore from snapshot** is reserved for the future Volume Migration feature and is currently disabled.

<Frame caption="State review dialog. Deploy fresh creates empty named volumes on the target node; Restore from snapshot is reserved for the future Volume Migration feature.">
  <img src="/images/blueprint-model/state-review-dialog.png" alt="State review dialog with Deploy fresh enabled and Restore from snapshot disabled" />
</Frame>

### Withdraw a single deployment

In the deployment table, click **Withdraw** on the node's row. For stateless blueprints, Sencho confirms once and runs `docker compose down` plus a directory removal. For stateful blueprints, the eviction dialog asks how to handle the data on this node:

- **Snapshot, then evict (recommended)** captures the blueprint's compose definition into [Fleet · Snapshots](/features/fleet-backups) before running `docker compose down`. The volume bytes still leave the node when compose tears down the named volumes; the snapshot only preserves the YAML so you can redeploy it elsewhere.
- **Evict and destroy data** runs the eviction without a snapshot. Type the blueprint name to confirm.
- Manual **Evict and destroy** / **Snapshot, then evict** require a current approved remove outcome for that node, and the node must no longer be desired. Confirm a remove rollout after the node leaves the selector first; destructive Evict while the node is still desired, or without remove approval, returns a stale-guard error. Plain stateless **Withdraw** does not require remove approval.

<Frame caption="Stateful eviction dialog. Snapshot, then evict captures the compose YAML to Fleet · Snapshots; Evict and destroy data requires typing the blueprint name to confirm.">
  <img src="/images/blueprint-model/eviction-dialog.png" alt="Stateful eviction dialog with Snapshot then evict and Evict and destroy data options" />
</Frame>

<Frame caption="Stateless eviction dialog. A single Withdraw deployment action; no data prompt because nothing persistent was detected.">
  <img src="/images/blueprint-model/eviction-stateless.png" alt="Stateless eviction dialog with a single Withdraw deployment action" />
</Frame>

<Note>
  **Snapshot, then evict** captures the compose definition only. Volume bytes are not shipped. The named volumes managed by this stack on the target node are removed by `docker compose down` just as with **Evict and destroy data**. To preserve data, capture volumes manually before withdrawing (see *Migrating stateful data between nodes* below).
</Note>

### Delete the blueprint

Stateless blueprints withdraw all deployments and then delete in a single click. Stateful blueprints with active or pending deployments refuse to delete to avoid silent orphans. Withdraw each deployment explicitly first, then delete.

## Federation: pin a blueprint to a single node

Admins can pin a blueprint to a specific node from **Fleet · Federation**. A pinned blueprint deploys only to its pinned node, regardless of the configured selector, and overrides the cordon flag on that node. The Blueprint detail sheet shows a read-only `Pin` section when a pin is in place; pin management itself lives in the Federation tab.

<Frame caption="Fleet · Federation, Blueprints subsection. Each row shows the blueprint, its configured selector, the Pinned to dropdown, and the effective placement that the reconciler will use.">
  <img src="/images/blueprint-model/federation-pin.png" alt="Federation tab pin policy table with one blueprint pinned and one unpinned" />
</Frame>

See [Fleet Federation](/features/fleet-federation) for the cordon and pin model.

## Cordoned nodes

Cordoning a node prevents the reconciler from selecting it for **new** placements and skips state-review provisioning on it. Existing deployments on a cordoned node keep running, and drift checks continue normally. Pin policy overrides cordon, so a blueprint pinned to a cordoned node still deploys.

## Notifications

Two notification events fire from the reconciler:

- `blueprint_drift_detected` (warning severity), in Observe and Suggest modes when drift is detected. In Observe the row updates silently in the table; in Suggest the notification is also dispatched through your notification routes.
- `blueprint_drift_correction_failed` (error severity), in Enforce mode when an auto-fix attempt fails.

Both events route through the standard alert pipeline. Configure delivery channels under [Notification routing](/features/alerts-notifications#notification-routing).

## Security and trust boundaries

**Who can do what.** The license tier and the user role together determine the available actions. Reading the catalog, the detail sheet, and the deployment status is available on every tier. Creating, editing, withdrawing, accepting a stateful deploy, and applying on demand require the admin role. Pinning a blueprint requires the admin role.

**The marker file is the trust root.** The reconciler will only deploy into, modify, or withdraw a directory that carries a `.blueprint.json` marker whose blueprint ID matches. A pre-existing directory with no marker, or a marker referencing a different blueprint, surfaces as **Name conflict** and is never modified.

**Local vs remote policy enforcement.** Local blueprint deploys evaluate the pre-deploy vulnerability policy gate against the local scanner state and credentials before the compose file is written to disk. Remote blueprint deploys are routed through the remote node's standard `/api/stacks` and `/api/stacks/<name>/deploy` endpoints over the proxy, so the remote node enforces its own policy with its own scanner state. The controlling instance does not bypass remote policy.

**Remote-node call path.** Sencho's controlling instance reaches remote nodes through the same authenticated proxy used by the rest of the fleet management surfaces, carrying the remote node's bearer token. Remote nodes do not need to accept any inbound connection beyond the one they already accept for fleet operations.

**Audit.** Blueprint create, edit, delete, pin, withdraw, and accept are administrative actions and are recorded through the standard [Audit log](/features/audit-log) pipeline along with the rest of the admin surface.

## Limitations and non-goals

By design, Blueprints do not include:

- A distributed storage layer (no CSI, no Longhorn-style replication).
- Automatic volume migration between nodes.
- Per-node parameter overrides or templating (one compose, all nodes).
- Staged or canary rollouts.
- Versioning history with one-click rollback. To revert, paste the prior compose into the editor and save.

Concrete operational constraints:

- **Reconciler cadence.** The tick interval is 60 seconds (5-second initial delay after startup). Approved blueprints reconcile on that cadence. Use **Apply now** and **Confirm Apply** after a change that clears approval.
- **Compose size.** YAML must be 96 KiB or fewer. Split very large compose files into smaller blueprints, or move generated content out of the compose body.
- **Selector size.** A selector accepts up to 200 entries per side (200 `nodes.ids`, or up to 200 each in `labels.any` and `labels.all`).
- **Name.** 1 to 64 characters matching `^[a-z0-9][a-z0-9_-]*$`. Rename is allowed only when every deployment is withdrawn (or there are none). Live placements and guards must be resolved first; rename clears approval back to pending.
- **Snapshot semantics.** **Snapshot, then evict** captures the compose YAML only. Volume bytes are removed by `docker compose down` just as with **Evict and destroy data**.
- **Restore from snapshot.** Reserved for the future Volume Migration feature and currently disabled in the state review dialog.

These omissions keep Blueprints honest: a compose-native fleet primitive that distributes the file you already have to the nodes you choose.

## Migrating stateful data between nodes (manual)

Sencho's compose-native lane does not include automatic volume shipping. **Snapshot, then evict** is a compose-only safety net: it preserves the YAML so you can redeploy elsewhere, but it does not move data. To relocate a stateful Blueprint's data from node A to node B, do it by hand before withdrawing:

1. Stop the Blueprint deployment on node A from the deployment table. Use **Snapshot, then evict** so the compose YAML is parked in [Fleet · Snapshots](/features/fleet-backups) while you handle volumes.
2. Use your host tooling (`docker run --rm -v <volume>:/data busybox tar -czf - /data > snapshot.tar.gz`, or app-aware tooling such as `pg_basebackup`, `mysqldump`, or `mongodump`) to capture the volume on node A.
3. Transfer the artifact to node B and restore it into the named volume there.
4. Update the Blueprint's selector to include node B; click **Apply now**, review the preview, and **Confirm Apply**.

A future Volume Migration feature will automate this with app-aware backup tooling.

## Practical workflows

**Multi-node identical reverse proxy.** A stateless `caddy-edge` blueprint with a labels selector matching `any=[edge]` and drift mode **Enforce**. Adding a new edge node deploys the proxy automatically within one tick. Editing the compose to bump the Caddy image redeploys every edge node on the next tick without operator intervention. Drift caused by a manual `docker compose down` on one edge node is corrected silently within a minute.

**Single-node managed Postgres.** A stateful `pg-fleet` blueprint with a `nodes` selector pointing at one database node and drift mode **Suggest**. The first deploy enters **Awaiting confirmation** so the operator chooses **Deploy fresh**. Subsequent compose changes (image bump, config change) re-enter **Awaiting confirmation** on the same node so the operator can decide whether the new revision is safe for the existing volume. Drift on the running container fires a `blueprint_drift_detected` notification but never auto-redeploys.

**Pin a blueprint to a specific node despite the selector.** Open **Fleet · Federation**, find the blueprint in the pin policy table, and pick the target node from the **Pinned to** dropdown. The pin overrides the selector for that blueprint, deploys only to the pinned node, and also overrides cordon on that node. Useful for relocating a stateful service to a specific host without rewriting the selector. Clear the pin to restore selector-driven placement.

**Observe-only audit blueprint.** A stateless monitoring stack (Vector, Promtail, a Prometheus exporter) with drift mode **Observe**. Drift is recorded silently in the deployment table; no notification fires and no auto-fix runs. Useful when you want Sencho to track placement and detect divergence on a low-signal stack without paging anyone.

## Troubleshooting

<AccordionGroup>
  <Accordion title="A deployment row shows 'Name conflict' and refuses to deploy">
    A directory by the blueprint's name already exists on that node and does not carry the `.blueprint.json` marker. The most likely cause is a manually created stack with the same name. Resolution: rename either the existing stack or the blueprint, then click **Apply now** on the detail sheet to retry.
  </Accordion>
  <Accordion title="A stateful deployment is stuck in 'Awaiting confirmation'">
    The reconciler will not auto-deploy a stateful blueprint to a node it has never run on. Click **Confirm deploy** on the row, then choose **Deploy fresh** in the dialog. Sencho will create empty named volumes and start the stack.
  </Accordion>
  <Accordion title="A deploy was blocked by vulnerability policy">
    Open the **Security** page and review the active scan policies for the target node on the **Policies** tab. The Blueprint deployment row records the blocking policy and affected image count. Either fix the image, relax the policy, or deploy through an explicit admin-approved bypass on the stack surface. Blueprints do not silently bypass deploy enforcement.
  </Accordion>
  <Accordion title="Compose content was rejected on save">
    Sencho accepts valid YAML up to 96 KiB. Split very large compose files into smaller blueprints or move generated content out of the Blueprint. Do not paste secrets into the compose body; use environment files or [Fleet Secrets](/features/fleet-secrets) where appropriate.
  </Accordion>
  <Accordion title="A remote node is offline or disconnected during apply">
    The row moves to **Failed** with the remote error. Reconnect the node (see [Pilot Agent](/features/pilot-agent) and [Multi-node management](/features/multi-node)), verify whether the stack directory contains `docker-compose.yml` and `.blueprint.json`, then click **Apply now**. If the directory exists without a matching marker, Sencho treats it as a name conflict until you rename or remove the remote stack manually.
  </Accordion>
  <Accordion title="A Docker daemon or registry failure surfaced during apply">
    The deployment row moves to **Failed** and records the Docker or registry error. Resolve the daemon, socket, registry credentials, rate limit, disk, or volume-permission issue on the affected node, then click **Apply now**. Watch that node's stack activity and security scan status after retry.
  </Accordion>
  <Accordion title="Drift is reported but never gets corrected">
    Confirm the drift policy is **Enforce** and that **Reconciler enabled** is on. Open the detail sheet to check the row's status and the most recent drift summary. If the drift was caused by a compose change that would destroy named volumes, Enforce intentionally downgrades to Suggest semantics for that event. Either change the compose to one that preserves the volumes, or withdraw the deployment with explicit operator confirmation and let the new revision deploy fresh.
  </Accordion>
  <Accordion title="'Apply now' is greyed out">
    **Apply now** requires the blueprint to be enabled. Open the detail sheet, click **Enable** to flip the reconciler back on, then click **Apply now**. The button is also disabled while the detail sheet is in edit mode; save or cancel the edit first.
  </Accordion>
  <Accordion title="Disabling a blueprint is rejected">
    Blueprints with active or drifted deployments refuse to disable, because doing so would orphan the running containers without a follow-up plan. Withdraw each affected deployment first, then disable the blueprint.
  </Accordion>
  <Accordion title="The data is gone after 'Snapshot, then evict'">
    Both eviction modes run `docker compose down`, which removes the named volumes managed by the stack on the target node. The snapshot stored in **Fleet · Snapshots** captures the compose definition only; the volume bytes are not included. To preserve data, capture the volume by hand before withdrawing (see *Migrating stateful data between nodes*). Bind mounts on the host filesystem are left in place by both eviction modes.
  </Accordion>
  <Accordion title="Eviction was aborted with 'Failed to capture compose snapshot before eviction'">
    Sencho aborted the eviction because the pre-eviction compose snapshot could not be written to the database. The deployment is still in place; nothing was destroyed. Check that the database is reachable, then retry the eviction. If you accept data loss and want to evict regardless, use **Evict and destroy data** instead.
  </Accordion>
  <Accordion title="A pinned blueprint did not deploy to nodes in its selector">
    By design. A pin replaces the selector entirely with the single pinned node, even if the selector resolves to other nodes. Either clear the pin in the Federation tab to restore selector-driven placement, or move the pin to a different node.
  </Accordion>
  <Accordion title="The reconciler took a minute to react to a change I just made">
    The reconciler tick interval is one minute for approved blueprints. After editing the selector, the compose, or the drift policy, click **Apply now**, review the rollout preview, and **Confirm Apply**. The same path recovers a row in **Failed** status.
  </Accordion>
</AccordionGroup>

## Common questions

<AccordionGroup>
  <Accordion title="Do Blueprints replace my existing stacks?">
    No. Stacks created in the per-stack lane (the **Stacks** sidebar) and Blueprints (the **Deployments** tab) coexist on every node. A Blueprint is identified by its `.blueprint.json` marker; the reconciler refuses to touch any directory that does not carry one with a matching blueprint ID, so user-authored stacks are safe from blueprint actions.
  </Accordion>
  <Accordion title="Is a Blueprint the same as a Stack?">
    A Blueprint is a fleet-wide declaration: one compose YAML targeting a set of nodes. Each node where the blueprint resolves materializes as a Stack on that node, in the same compose directory layout the rest of the per-stack lane uses, with a `.blueprint.json` marker added. You can browse the materialized stack in the per-node Stacks view; the Blueprint is the source of truth that drives it.
  </Accordion>
  <Accordion title="How fast does drift get noticed?">
    After you confirm the updated rollout, the next reconciler tick (or the Confirm Apply execution itself) places or removes as approved. The reconciler ticks every 60 seconds with a 5-second initial delay after startup. Within Enforce mode, drift correction for an already-approved place outcome begins on the same tick that detects the drift.
  </Accordion>
  <Accordion title="Can I roll back to a previous revision?">
    Not through a one-click history. Blueprints intentionally do not keep a versioned revision history. To revert, paste the prior compose into the editor and save; the reconciler treats the change as a new revision and redeploys.
  </Accordion>
  <Accordion title="Does the snapshot in 'Snapshot, then evict' contain my database?">
    No. The snapshot captures the compose YAML only, so you can redeploy the same definition elsewhere. Volume bytes (the database files, the cached state, the uploads directory) are removed by `docker compose down` along with the named volumes. To preserve data across an eviction, capture the volume by hand before withdrawing.
  </Accordion>
  <Accordion title="Why doesn't Sencho move volumes between nodes for me?">
    Volume migration is app-aware. A Postgres datadir is not the same kind of artifact as a Redis RDB file or a MinIO bucket, and a generic `tar` of the volume is rarely safe while the container is running. A future Volume Migration feature will integrate app-aware backup tooling. Until then, the manual workflow in *Migrating stateful data between nodes* is the supported path.
  </Accordion>
  <Accordion title="If I cordon a node, does that uninstall the Blueprints on it?">
    No. Cordoning only blocks new placements and skips state-review provisioning. Existing deployments on the cordoned node keep running and continue drift-checking. To uninstall a deployment from a cordoned node, withdraw it explicitly from the deployment table.
  </Accordion>
  <Accordion title="Can a Pilot-attached node host a Blueprint deployment?">
    Yes. The reconciler dispatches deploys to remote nodes through the standard proxy regardless of whether the remote runs in Pilot Agent or Distributed API Proxy mode. The remote node enforces its own vulnerability policy and writes its own marker file, the same way a local deploy does.
  </Accordion>
</AccordionGroup>

## Where Blueprints fits

<CardGroup cols={2}>
  <Card title="Fleet Federation" icon="network-wired" href="/features/fleet-federation">
    Cordon nodes to block new placements and pin blueprints to a specific node to override the selector.
  </Card>
  <Card title="Fleet Snapshots" icon="camera" href="/features/fleet-backups">
    Where Snapshot-then-evict parks the compose YAML and where you redeploy it from.
  </Card>
  <Card title="Fleet Actions" icon="bolt" href="/features/fleet-actions">
    Bulk operations on the running fleet. Blueprints sit on the desired-state lane; Fleet Actions sit on the imperative lane.
  </Card>
  <Card title="Atomic Deployments" icon="shield-check" href="/features/atomic-deployments">
    Deploy safety on the per-stack lane. The same vulnerability policy gate runs before each Blueprint deploy.
  </Card>
  <Card title="Pilot Agent" icon="link" href="/features/pilot-agent">
    Outbound-only remote mode. A Pilot-attached node is eligible as a Blueprint target the same way a Distributed API Proxy node is.
  </Card>
  <Card title="Alerts & Notifications" icon="bell" href="/features/alerts-notifications">
    Where `blueprint_drift_detected` and `blueprint_drift_correction_failed` route. Configure channels per notification.
  </Card>
</CardGroup>
