mirror of
https://github.com/Studio-Saelix/sencho.git
synced 2026-08-05 08:27:42 +00:00
v0.90.0
566 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Anso
|
86bfc108ae |
fix(security): resolve open CodeQL path-injection and temp-file alerts (#1322)
Re-establish the path-containment barrier inline at the backup readdir sink in restoreStackFiles. The sink previously built backupDir through the getBackupDir helper, whose stack-name validation the static analyzer does not trace, leaving a flagged path-injection sink. The barrier now resolves backupDir against its root and asserts containment inline, the same pattern already used in backupStackFiles. Behavior is unchanged for valid stack names (already validated one line above by resolveStackDir). Scope the js/insecure-temporary-file rule out of e2e/** in the CodeQL config. End-to-end fixtures must seed files into the backend's COMPOSE_DIR so the API under test can read them back; that path is a fixed location under /tmp in both CI and local dev, which the rule flags. A randomized temp directory does not apply because the backend resolves against its own COMPOSE_DIR. Production code is still analyzed. |
||
|
Anso
|
f7f3afe05a |
feat(stacks): one-click import for stray compose files (#1320)
* feat(stacks): move discovered import candidates into place The guided import flow previewed loose and nested compose files but could not act on them, so it only told the user where to move files by hand. Add an opt-in "Move into place" action: relocate a loose-root file into its own <name>/ subfolder, or promote a nested stack directory one level up, so Sencho's filesystem discovery lists it as a stack. The file stays a plain compose file on disk; nothing is captured into a store. The move re-derives the candidate from a fresh scan and matches by location, validates the destination name and containment, resolves symlinks before the rename, and never overwrites an existing stack. Backend and frontend both gate the action on stack:create. Also fix the rescan flicker: scan results now stay on screen while a rescan runs (only the Rescan button shows progress) instead of the whole panel collapsing to a spinner, and an empty rescan surfaces a toast. * fix(stacks): make import-move destination creation atomic The loose-root branch created the destination directory with mkdir recursive after an access() existence precheck. If the destination appeared between the check and the create, recursive accepted the existing directory and the following rename could overwrite a same-named compose file inside it, so the intended conflict response never fired. Use a non-recursive mkdir so a destination that already exists raises a conflict instead of being merged into. Add a regression test that forces the precheck to miss and asserts the existing file is left intact. * fix(stacks): only offer not-yet-imported compose files in the import tab The import tab listed every compose file in the compose directory, including ones that are already stacks (a top-level subfolder with a compose file), which just duplicated the sidebar. The scan now skips those and surfaces only files that still need importing: a compose file loose at the compose-dir root, or one nested a folder too deep. Also harden the move-into-place write path that turns a stray file into a stack: a failed rename after the destination folder is created now rolls back the empty folder, so a retry is not blocked by a false "already exists" conflict, and the move switches on an exhaustive set of placements so a new one cannot silently take the wrong branch. The sidebar refreshes after a move so the imported stack appears right away, and the docs describe import as relocating a file, not capturing running containers. * fix(stacks): reject a nested import whose compose file escapes the base The move-into-place path for a nested compose file validated only the parent directory's real path, not the compose file itself. A directory that is real and inside the compose base but holds a compose file symlinked outside the base would survive the directory move and become a stack whose compose file still points outside the base, which the editor read path would then follow. The move now resolves the compose file too and refuses it unless it stays inside the resolved source directory, matching the loose-root check and the scan's preview reader. * fix(stacks): satisfy CodeQL path and log analysis in import-move The import-move write path built its destination directory from the user-provided stack name through resolveStackDir, whose containment barrier is wrapped in a helper that static analysis does not credit, so every filesystem sink on the destination was flagged as path injection. Re-establish the resolve-against-the-safe-base plus startsWith barrier inline at the sinks, matching the read and backup paths in the same file, and route the relocated file path through the same check. The name is already restricted to an alphanumeric, hyphen, and underscore allowlist, so the containment can never actually fail; this only makes the existing safety visible to the analyzer. Also log the move route's error as a sanitized message rather than the raw error object, so a name embedded in an error message cannot forge log lines. |
||
|
Anso
|
308949282c |
feat(resources): reclaim banner controls and accurate reclaim math (#1318)
* feat(resources): reclaim banner controls and accurate reclaim math Make the Resources Hub reclaim banner match what it advertises and give operators control over when it appears. - "Review & prune" now reclaims every category the banner lists (unused images, stopped containers, and dangling volumes) instead of images only, so the banner clears in one action. Pruning runs volumes first, while stopped containers still reference their named volumes, so a stopped stack's data is never cascaded into deletion. - Add a "Show reclaimable-space banner" toggle under Settings, System, Docker hygiene (on by default, per node) and a dismiss control on the banner that snoozes it until the reclaimable total grows again. - Fix the reclaimable-space math: count only containers a prune can actually remove (created, exited, dead) and size them by their writable layer, so a small, un-prunable remainder no longer keeps the banner up. * fix(resources): show the reclaim banner when the settings fetch fails A failed or empty /settings load left the banner's enabled flag at the previously active node's value, so switching from a node with the banner turned off to a node whose /settings errored kept the new node's banner hidden. Set the flag unconditionally after the staleness guard so a failed fetch falls back to the default-on state for the current node. |
||
|
Anso
|
716daf77d0 |
feat(updates): auto-prune dangling images after updates (#1316)
* feat(updates): auto-prune dangling images after updates Each update pulls a fresh image and recreates containers, leaving the replaced image behind as a dangling layer that previously had to be pruned by hand. A new "Prune dangling images after updates" toggle under Settings > System > Docker hygiene reclaims these automatically. The setting is on by default and opt-out. When enabled, a successful stack update (manual or scheduled) and a Sencho self-update each remove the dangling image layers they orphaned. Only untagged layers are touched; tagged images, volumes, and data are never removed. The toggle requires an admin account and is per node: each instance honors its own value, so a remote node self-update applies that node's own preference. A prune failure never affects the update result: on the stack path it is caught and logged after the update has already succeeded, and on the self-update path the helper-shell prune runs only after a clean recreate and cannot change the exit code or the recorded update error. * security(self-update): shell-quote label-derived values in helper command Address review feedback on the prune-on-update change: - The self-update helper command interpolated the compose service name and config-file paths (both read from Docker Compose labels) straight into a shell string. Shell-quote them via shQuote so a label carrying shell metacharacters stays inert data and cannot break the exit-code capture, error-file write, or prune guard. - Correct the settings copy and docs: the prune is a standard dangling-image prune, so it reclaims every untagged layer on the node, not only the one the current update orphaned. Tagged images, volumes, and data remain untouched. - Add tests: shell-metacharacter neutralization and prune-output suppression in the self-update command, and an atomic-update case asserting a prune failure does not trigger a rollback. * fix(updates): omit the reclaim figure when the daemon reports zero bytes End-to-end testing on a Docker daemon backed by the containerd image store showed the post-update prune removing a dangling image while the prune API returned SpaceReclaimed=0, so the stream printed "reclaimed 0.0 MB" even though an image was removed. Show the reclaimed figure only when the daemon reports a non-zero value; otherwise the line reads "=== Pruned dangling images ===". The overlay2 store still reports real figures and shows them. Add a test covering both branches. |
||
|
Anso
|
b4cca9b995 |
fix(blueprints): allow deleting blueprints stuck on awaiting-confirmation deployments (#1313)
* fix(blueprints): allow deleting blueprints stuck on awaiting-confirmation deployments Withdrawing a stateful deployment removed its row, but the reconciler re-created it as "Awaiting confirmation" for any node still matching the selector. The delete guard counted that recreated row as blocking, so a stateful blueprint could never be deleted: every withdraw came back as a pending review and delete kept refusing. The delete guard now blocks only on deployments that have a live stack on a node (active, drifted, correcting, evict_blocked, or a pending review that was previously deployed). A never-deployed "Awaiting confirmation" deployment no longer blocks; the delete path's best-effort withdraw-all loop and the foreign-key cascade clear those rows. Live stateful deployments still require explicit withdrawal first, so the snapshot-vs-destroy choice is always made by the operator. Updates the delete dialog copy to match and adds delete-guard coverage. * fix(blueprints): harden delete against destroying unmanaged or live stacks Address two issues found while auditing the delete guard: - A never-deployed deployment (for example a reconciler-created pending review) no longer blocked delete, but the route's withdraw-all loop still ran the withdraw primitive for it. withdrawFromNode proceeds on a missing marker, so deleting the blueprint could down and delete an unmanaged same-name stack on the node. The loop now withdraws only the stacks Sencho deployed and still owns, and skips never-deployed, name_conflict, and withdrawn rows. - A stack that was deployed then failed keeps its last_deployed_at, but the guard's status list did not include failed, so it could be deleted without the snapshot-vs-destroy choice. The guard now keys on last_deployed_at (a stack we deployed and own) rather than a status list, so any owned live stack blocks regardless of its current status, while never-deployed, name_conflict, and withdrawn rows do not. Adds delete-guard coverage for these paths, including that withdraw is never invoked for an unmanaged row and is invoked for an owned one. |
||
|
Anso
|
865d792874 |
feat(pricing): collapse to two tiers (#1309)
* feat(pricing): collapse to two tiers (Community + Admiral) Collapse Sencho's pricing from three tiers (Community / Skipper / Admiral) to two: a generous free Community tier and a single paid Admiral tier. The Skipper tier is removed. Now free in Community: auto-heal, auto-update, scheduled operations, webhooks, notification routing, Fleet Actions and bulk operations, SSO preset providers (Google / GitHub / Okta), unlimited users with admin and viewer roles, and deploy safety (atomic deploys, auto-rollback, and one-click rollback). Admiral (paid) is focused on running and governing a fleet: blueprints, Fleet Secrets, deploy enforcement, vulnerability report export, audit log, host console, private registries, mesh networking, node cordon, managed cloud backup, LDAP / Active Directory SSO, and the advanced RBAC roles (deployer, node-admin, auditor) with per-resource scoped assignments. Internally the license variant distinction is removed so tier is binary (community / paid). License validation still verifies the Lemon Squeezy store and product before granting paid status. Docs and the contributor guide are updated to the two-tier model. * docs(pricing): correct licensing page to two-tier pricing and tidy stale tier wording The licensing docs page kept the old Admiral pricing plus a Founder Lifetime column and an Enterprise paragraph after the two-tier collapse. Update it to $12/month or $99/year, drop the lifetime and Enterprise content, and link to the pricing page for current pricing. Also fix stale "Skipper" wording in CLA.md, SUPPORT.md, one test title, and three test comments. Historical CHANGELOG entries and the retired-Skipper license-guard test are intentionally left as-is. * docs: align licensing and SSO pages with the two-tier model Correct the SSO overview so the Google, GitHub, and Okta presets read as available on every tier, matching the provider table; only LDAP and Active Directory require Sencho Admiral. Remove the lifetime-plan references from the licensing, settings, and troubleshooting pages so they reflect subscription-only Admiral pricing. * fix(rbac): omit scoped permissions from /me on the Community tier Scoped role assignments only take effect on the paid tier, but GET /api/permissions/me returned them unconditionally, so a downgraded instance with leftover assignments rendered per-resource affordances the API then rejected with 403. The endpoint now mirrors the permission middleware and includes scoped permissions only on the paid tier. Adds a regression test covering the downgrade case. * docs: use custom-pricing wording on the contact page The two-tier model has no Enterprise tier; reword the contact page's enterprise pricing/deals to custom pricing/deals so it does not imply a tier that no longer exists. |
||
|
dependabot[bot]
|
7b78cb9cc9 |
chore(deps): bump the all-npm-backend group in /backend with 9 updates (#1306)
Bumps the all-npm-backend group in /backend with 9 updates: | Package | From | To | | --- | --- | --- | | [axios](https://github.com/axios/axios) | `1.16.1` | `1.17.0` | | [isomorphic-git](https://github.com/isomorphic-git/isomorphic-git) | `1.38.3` | `1.38.4` | | [otplib](https://github.com/yeojz/otplib/tree/HEAD/packages/otplib) | `13.4.0` | `13.4.1` | | [systeminformation](https://github.com/sebhildebrandt/systeminformation) | `5.31.6` | `5.31.7` | | [eslint](https://github.com/eslint/eslint) | `10.4.0` | `10.4.1` | | [typescript-eslint](https://github.com/typescript-eslint/typescript-eslint/tree/HEAD/packages/typescript-eslint) | `8.60.0` | `8.60.1` | | [vitest](https://github.com/vitest-dev/vitest/tree/HEAD/packages/vitest) | `4.1.7` | `4.1.8` | | [@aws-sdk/client-ecr](https://github.com/aws/aws-sdk-js-v3/tree/HEAD/clients/client-ecr) | `3.1054.0` | `3.1061.0` | | [@aws-sdk/client-s3](https://github.com/aws/aws-sdk-js-v3/tree/HEAD/clients/client-s3) | `3.1054.0` | `3.1061.0` | Updates `axios` from 1.16.1 to 1.17.0 - [Release notes](https://github.com/axios/axios/releases) - [Changelog](https://github.com/axios/axios/blob/v1.x/CHANGELOG.md) - [Commits](https://github.com/axios/axios/compare/v1.16.1...v1.17.0) Updates `isomorphic-git` from 1.38.3 to 1.38.4 - [Release notes](https://github.com/isomorphic-git/isomorphic-git/releases) - [Commits](https://github.com/isomorphic-git/isomorphic-git/compare/v1.38.3...v1.38.4) Updates `otplib` from 13.4.0 to 13.4.1 - [Release notes](https://github.com/yeojz/otplib/releases) - [Commits](https://github.com/yeojz/otplib/commits/v13.4.1/packages/otplib) Updates `systeminformation` from 5.31.6 to 5.31.7 - [Release notes](https://github.com/sebhildebrandt/systeminformation/releases) - [Changelog](https://github.com/sebhildebrandt/systeminformation/blob/master/CHANGELOG.md) - [Commits](https://github.com/sebhildebrandt/systeminformation/compare/v5.31.6...v5.31.7) Updates `eslint` from 10.4.0 to 10.4.1 - [Release notes](https://github.com/eslint/eslint/releases) - [Commits](https://github.com/eslint/eslint/compare/v10.4.0...v10.4.1) Updates `typescript-eslint` from 8.60.0 to 8.60.1 - [Release notes](https://github.com/typescript-eslint/typescript-eslint/releases) - [Changelog](https://github.com/typescript-eslint/typescript-eslint/blob/main/packages/typescript-eslint/CHANGELOG.md) - [Commits](https://github.com/typescript-eslint/typescript-eslint/commits/v8.60.1/packages/typescript-eslint) Updates `vitest` from 4.1.7 to 4.1.8 - [Release notes](https://github.com/vitest-dev/vitest/releases) - [Changelog](https://github.com/vitest-dev/vitest/blob/main/docs/releases.md) - [Commits](https://github.com/vitest-dev/vitest/commits/v4.1.8/packages/vitest) Updates `@aws-sdk/client-ecr` from 3.1054.0 to 3.1061.0 - [Release notes](https://github.com/aws/aws-sdk-js-v3/releases) - [Changelog](https://github.com/aws/aws-sdk-js-v3/blob/main/clients/client-ecr/CHANGELOG.md) - [Commits](https://github.com/aws/aws-sdk-js-v3/commits/v3.1061.0/clients/client-ecr) Updates `@aws-sdk/client-s3` from 3.1054.0 to 3.1061.0 - [Release notes](https://github.com/aws/aws-sdk-js-v3/releases) - [Changelog](https://github.com/aws/aws-sdk-js-v3/blob/main/clients/client-s3/CHANGELOG.md) - [Commits](https://github.com/aws/aws-sdk-js-v3/commits/v3.1061.0/clients/client-s3) --- updated-dependencies: - dependency-name: axios dependency-version: 1.17.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: all-npm-backend - dependency-name: isomorphic-git dependency-version: 1.38.4 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: otplib dependency-version: 13.4.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: systeminformation dependency-version: 5.31.7 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: eslint dependency-version: 10.4.1 dependency-type: direct:development update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: typescript-eslint dependency-version: 8.60.1 dependency-type: direct:development update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: vitest dependency-version: 4.1.8 dependency-type: direct:development update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: "@aws-sdk/client-ecr" dependency-version: 3.1061.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: all-npm-backend - dependency-name: "@aws-sdk/client-s3" dependency-version: 3.1061.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: all-npm-backend ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Anso <dev@saelix.com> |
||
|
Anso
|
0683aa9395 |
fix(settings): reflect role, tier, and node scope in settings panels (#1300)
* fix(settings): reflect role, tier, and node scope in settings panels Three gate fixes so the Settings panels match what the backend enforces. Non-admin roles saw editable fields and a Save button on System Limits, Developer, and App Store, but writes require admin, so Save always failed. These panels now render read-only for non-admins (controls disabled, Save hidden) while still showing the values. The Developer panel is node-scoped but read and wrote the controlling instance regardless of the selected node, so a remote node's debug mode and retention windows could not be changed from the UI. It now targets the active node like System Limits. The settings shell derived the Admiral entitlement locally; it now consumes the backend-provided value the API authorizes against, and that value is corrected to require an active paid tier so an expired Admiral license no longer reports as Admiral. * fix(settings): gate audit_retention_days writes behind Admiral audit_retention_days configures the Admiral-only audit log (the audit-log routes require Admiral, and the Developer settings UI only shows the field to Admiral operators), but the settings POST/PATCH handlers only required an admin role. A non-Admiral admin (for example Skipper, or an expired-Admiral admin whose tier dropped to community) could still set it through the API. Gate writes to that key with requireAdmiral on both the single-key POST and the bulk PATCH paths, matching the audit-log routes and the UI. Other keys remain writable by any admin. * fix(settings): reject unknown keys on PATCH instead of silently stripping The bulk settings PATCH validated the body with a Zod object schema that strips unknown keys by default, so a request carrying a disallowed key (for example an auth_* secret) returned 200 as a no-op instead of being rejected. No secret was written, but it diverged from the single-key POST path, which rejects disallowed keys, and could hide client drift. PATCH now rejects any key outside the allowlist with a 400 before validation or write, keeping the bulk path fail-closed and consistent with POST. |
||
|
Anso
|
4596a90474 |
fix(settings): serialize GET /api/settings from an allowlist (#1299)
The settings read returned the entire global_settings map minus a small denylist of auth keys. Other subsystems persist their config in the same table, so cloud backup values (endpoint, bucket, access key) were returned to any authenticated user, including read-only roles, bypassing the redaction the dedicated cloud-backup endpoint applies. Project the response from the operational allowlist instead, so only the keys the settings UI reads are returned and any key written to global_settings by another subsystem is excluded by default. Remove the now-unused denylist constant. |
||
|
Anso
|
42fc8048fe |
fix(metrics): host memory usage excludes reclaimable page cache (#1297)
* fix(metrics): host memory usage excludes reclaimable page cache Host RAM was computed as mem.used / mem.total via systeminformation, but mem.used counts reclaimable buffers/cache as used, so a busy Linux host read ~99%. Switch the dashboard stats, the fleet node self-report, and the host-RAM alert threshold to mem.active / mem.total (cache-excluded), and report used: mem.active and free: mem.available so the byte readout stays consistent with the percentage. Add regression tests for a cache-heavy host (no false alert) and a genuinely busy host (alert still fires). * test(metrics): assert system stats memory excludes reclaimable cache The cached /api/system/stats test mocked si.mem() without active/available, so after the route switched to the cache-excluded fields it produced a NaN percentage that the shape-only assertions did not catch. Fill the mock with a realistic shape and assert the route reports the active working set, not the cache-inclusive used/free. |
||
|
Anso
|
2435da232b |
fix(api-tokens): harden rate limiting and surface list-load errors (#1292)
* fix(api-tokens): scope per-token rate limits to live tokens Forged or token-shaped Authorization headers no longer mint their own rate-limit budget. The key generator now grants a per-token budget only to a real, active token and falls back to per-IP keying for anything else, so a single source cannot evade the global limiter by rotating fake tokens. The validated token is memoized on the request, so authentication reuses it without a second database lookup. Token validation (format, checksum, lookup, revocation, expiry) is now a single shared helper used by the HTTP auth middleware, the WebSocket upgrade handler, and the rate-limit key generator, replacing two near-identical inline copies that could drift apart. The last-used timestamp write is throttled so a busy token no longer writes to the database on every request. * fix(api-tokens): surface token list-load failures with a retry A failed load of the API tokens list was swallowed: a server error rendered the empty "no tokens yet" state with no sign that anything went wrong. The list now shows an error card with a Retry action and raises a toast on any non-ok response or network error, matching the create and revoke flows. Adds a troubleshooting entry for the error. * test(api-tokens): seed tokens via the shared test helper The new hardening and WS-scope suites computed sha256 of a raw token directly, which CodeQL flags as js/insufficient-password-hash (a false positive: these are 256-bit CSPRNG opaque tokens, not passwords). Route token creation through the existing apiTokenTestHelper and read the stored token_hash back from the row, so the suites no longer hash anything themselves. Also removes the duplicated createToken helpers. * fix(api-tokens): key the rate limiter by the same credential auth uses The rate-limit key generator checked the session cookie before the Authorization bearer, while authMiddleware authenticates bearer-over-cookie (bearerToken || cookieToken). A request could send a Bearer API token plus a forged cookie and be keyed by the cookie's (forgeable, rotatable) username, sidestepping the per-token / per-IP keying the limiter applies to API tokens: a valid token would lose its own bucket, and a forged token-shaped bearer would no longer collapse to per-IP. Reorder the generator to mirror auth: process the bearer first (validate the API token and key per-token or fall back to per-IP; otherwise decode the JWT by username/sub), and consult the cookie only when there is no bearer. Regression tests cover a valid and a forged sen_sk_ bearer, each sent with a forged cookie. |
||
|
Anso
|
ae0b9d166c |
fix(git-sources): return 200 for stacks without a Git source (#1294)
The dashboard probes GET /api/stacks/<name>/git-source for every stack to
decide whether to show a Git badge. For a stack with no Git source attached
the endpoint answered 404, so a fleet of unlinked stacks painted a red 404
per stack in the browser console.
Return 200 { linked: false } when the stack exists but has no Git source,
and reserve 404 for the genuine "stack does not exist" case (mirroring the
existence guard the PUT handler already uses). The two consumers that read
this endpoint now treat the { linked: false } sentinel as unlinked rather
than as a configured source.
|
||
|
Anso
|
c68f0b494c |
test(stacks): drain pending download-metric records between tests (#1293)
The "records the download metric exactly once" test in stack-files-routes intermittently failed with "expected 2 to be 1". The download route records its metric asynchronously, on the file stream's end/close and the response's close event, so a prior download test's record could land after the next test called resetFileExplorerMetrics(), leaking a count across the reset. The route's per-request recording is correct (a synchronous guard); the leak was purely cross-test in the suite. Add an afterEach in the download suite that waits for the download count to settle (bounded poll) before the next test runs, so no pending record survives the reset, and assert the count actually settled so a runaway record surfaces rather than being silently swallowed. |
||
|
Anso
|
5289f01bfd |
feat(onboarding): add first-run environment checker (#1290)
* feat(onboarding): add first-run environment checker Add a preflight that checks whether the host can run Docker deploys before a deploy fails for an avoidable reason. It verifies the Docker engine is reachable and permitted, the Compose plugin is present, the compose directory is writable and mounted at a matching host path, the dashboard is behind TLS, and the compose volume has disk headroom. Each result that needs attention carries a specific fix rather than a generic error, and the checks never block: an operator who knows their setup can continue. The checks run as the final step of first-boot setup and can be re-run any time from the Recovery settings tab. A new admin-only endpoint, GET /api/diagnostics/environment, backs both surfaces. * fix(onboarding): distinguish unverified path mapping and support parent binds Treat a container whose self-inspect fails as an unverified path-mapping warning instead of a false "not containerized" pass, so an unverifiable mapping never reads as healthy. Resolve the compose directory through the longest-prefix bind mount and compare the host path it resolves to, so a parent bind such as -v /opt:/opt correctly covers COMPOSE_DIR=/opt/compose instead of warning that the directory is not bind-mounted. * test(e2e): advance the setup wizard past the environment step in loginAs The first-run setup helper clicked "Initialize console" and immediately waited for the dashboard, but setup now shows an environment-preflight step before landing the console. Click "Enter Sencho" to complete onboarding before asserting the dashboard, so the first test on a fresh instance passes. |
||
|
Anso
|
653be3296b |
fix(stacks): name the body field in the stack-create required error (#1289)
The create endpoint reads the new stack name from the body field stackName, but a missing or non-string value returned "Stack name is required and must be a string", which points at a value problem and leaves anyone scripting against the stacks API unsure which field to fix. Name the field in the message so the cause is unambiguous, and add regression coverage for the missing and non-string cases. |
||
|
Anso
|
5e6e96e405 |
feat(mesh): add developer-mode diagnostics to the mesh data plane (#1287)
* feat(mesh): add developer-mode diagnostics to the mesh data plane Add a developer-mode-gated [Mesh:diag] diagnostic log to MeshService, following the existing diagnostic-logging pattern: gated on the shared developer_mode setting (off in production by default) and every value run through sanitizeForLog. The diagnostics cover the forwarder dispatch decision (which self-node resolution won, and whether the route is same-node or cross-node), the entry of the opt-in, opt-out, enable, and disable operations, and completion timing for opt-in, node disable, and the alias-cache refresh. This lets an operator trace a slow or stuck mesh operation from the logs without attaching a debugger. The calls sit only at per-operation, per-accept, and per-refresh cadences, never inside the per-frame byte-relay loops. Add tests covering the developer_mode on/off gating and a guard that a node's api token never reaches a diagnostic log or the activity buffer. * refactor(mesh): redact secret-shaped values in developer-mode diagnostics Run each [Mesh:diag] detail through redactSensitiveText before sanitizeForLog so a future caller cannot leak a Bearer token, JWT, or credentialed URL through a diagnostic line, regardless of which call site emits it. No current call site passes a secret; this is defense in depth. Use a JWT-shaped canary in the no-leak test so it guards the real credential class. |
||
|
Anso
|
c6d1631afe |
feat(recovery): add safe-mode recovery surface and emergency CLI (#1286)
* feat(recovery): add safe-mode recovery surface and emergency CLI Add a read-only Recovery tab under Settings (admin-only) backed by a new GET /api/diagnostics endpoint reporting app version, database integrity, encryption-key status, Docker reachability, account and SSO counts, and non-secret configuration. The endpoint loads without Docker or live metrics so it stays available when the dashboard does not, requires a genuine admin session, and builds its config block from a non-secret allowlist so no credentials are ever exposed. Expand the emergency command-line toolkit beyond the two-factor reset with seven host-level commands: reset-password, create-emergency-admin, clear-sessions, disable-sso, diagnostics, validate-db, and backup-data. Each prints its result, exits with a meaningful status code, and writes an audit entry where it changes state. Document the toolkit in a new operator guide and link it from the recovery and two-factor pages. * feat(recovery): download the emergency command reference as a text file The recovery commands are needed exactly when the dashboard is unreachable, so reading them only in-app is a chicken-and-egg problem. Add a Download button to the command-line section that saves the full `docker compose exec sencho ...` reference as a text file, letting operators keep it on hand before they need it. Reuses a shared download helper with the existing diagnostics export. * fix(recovery): harden diagnostics, backup, and emergency-admin against edge cases Address findings from an independent review of the recovery toolkit: - DiagnosticsService now degrades instead of throwing when a queried table is missing or corrupt: each read falls back and is folded into database.ok, so a broken database reports "problem detected" rather than failing the whole endpoint or showing a misleading healthy state with zeroed counts. - backup-data refuses a destination that resolves to the live database, which would otherwise report success while producing no separate copy. - create-emergency-admin now applies the same username rule as the user- management route, extracted to a shared helper so both stay in sync. Adds tests for a missing read table, a malformed emergency-admin username, and the backup same-target rejection. |
||
|
Anso
|
06b25262cc |
feat(stacks): guided first stack import flow (#1285)
* feat(stacks): add guided first stack import flow Add an Import mode to the Create Stack dialog and a zero-stacks empty state so a new user who already has compose files on disk can land their first stack without reading the docs first. A read-only scan of the compose directory (GET /api/stacks/import/scan) lists the compose files it finds with a dry preview of each file's services, ports, volumes, and env files. Each result is labelled by placement: already a stack, loose at the root of the compose directory, or one folder too deep, with the exact path to move misplaced files to. The scan never writes, moves, or changes any files. Manual stack creation (Empty, From Git, From Docker Run) is unchanged. * fix(stacks): read import-scan candidates via a single file handle Open the compose file once and stat plus read on the same descriptor so the size check and the read observe the same inode, instead of resolving the path twice (stat then readFile), which is a time-of-check/time-of-use race. Mirrors the existing handle-based readers in FileSystemService. * fix(stacks): confine import scan to the compose dir and refine the empty state Harden the read-only import scan: - Resolve symlinks and confirm the real target stays inside the compose directory before reading a candidate, and reject non-regular files, so a symlinked compose file or parent cannot expose a file outside the compose directory through the preview (matches resolveSafeStackPath). - Read at most the stat-reported size (bounded by the 1 MiB cap) from the open handle, so a file that grows after the size check cannot exceed the cap. - Log when the compose directory or a subdirectory cannot be read, so an access failure is not silently reported as "no compose files found". Only show the first-run "No stacks yet" prompt when no filter chip is active, so a filter that matches nothing is not mistaken for an empty fleet. |
||
|
Anso
|
c82a39c65a |
fix(mesh): hide node and stack management controls from non-admins (#1284)
* fix(mesh): hide node and stack management controls from non-admins The Routing tab rendered the per-node mesh enable/disable toggle and the stack opt-in/opt-out controls for any Admiral-tier user, but those backend routes require the admin role. A non-admin viewer on an Admiral instance saw controls that returned 403. Thread a canManage flag (true only for admins) from the Fleet view into the Routing tab, its node cards, and the opt-in sheet so non-admins get a read-only Routing tab: the enable/disable toggle, add-stack, and opt-in/opt-out controls are hidden, while status, aliases, topology, activity, diagnostics, and the alias test probe stay available. This mirrors the Federation tab's existing read-only treatment for non-admins. Add backend route-gating tests covering the tier and admin-role guards on every mesh route, and frontend render-gate tests for the node card and the opt-in sheet in both density layouts. * refactor(mesh): require canManage on the routing-node-card primitive Remove the permissive `canManage = true` default on the shared routing-node-card primitive so a new call site cannot render the management controls without an explicit decision. Every current caller already passes the flag; the type now enforces it. Drop the omitted-prop test, which covered a state the compiler now prevents. |
||
|
Anso
|
65a69d9ecc |
fix(nodes): never send stored node tokens to clients (#1281)
Node read endpoints now return a client-safe projection that omits the stored api_token and exposes a has_token boolean instead, so a node's long-lived proxy credential is never serialized to a browser or API token client. The token stays encrypted at rest and is read server-side only by the components that need it (the remote proxy, the connection test, and the mesh dialer). The edit form opens the API Token field blank, and a blank value keeps the existing credential, so saving an edit without retyping the token no longer clears it; a non-empty value rotates it. The backend enforces the same rule defensively. Node management actions (add, edit, delete, test connection, generate node token) are gated in the UI to match their server-side permission checks, so operators no longer see an action the API would reject. The test-connection route also gains the missing server-side permission and token-scope guards. Also validate the x-node-id header and fall back to the default node for malformed values instead of an obscure 404, and return 400 (not 500) when deleting the default node. |
||
|
Anso
|
35a1182890 |
fix(nodes): gate node-management actions by role and release pilot tunnels on delete (#1280)
* fix(nodes): gate node-management actions by role and release pilot tunnels on delete The node-management write actions in the Nodes panel (add, edit, delete, generate node token, reset fleet-sync anchor) rendered for every signed-in role, but the API enforces the manage-nodes permission on them, so lower-privilege roles saw buttons that returned 403. The panel now renders each action against the same permission its route enforces; the read-only node table stays visible to every role. Deleting a node now also tears down its live pilot-agent tunnel (and any mesh bridge) immediately, releasing the loopback server, heartbeat timer, and open streams instead of leaving them until the agent next disconnects, matching the cleanup the re-enrollment path already performed. Adds backend route tests for the permission boundaries and tunnel teardown, and a Nodes panel render test covering the viewer, admin, and node-admin views. * fix(nodes): close proxy mesh bridges via the dialer on node delete to skip a redial Deleting a node closed any active mesh bridge through PilotTunnelManager, but a proxy-mode bridge is owned by the mesh dialer, whose close listener then treated the close as unexpected and scheduled a reactive redial against the node being removed. The delete handler now closes a proxy bridge through the dialer's intentional-close path first (which suppresses the redial), then closes a pilot-agent tunnel as before. Adds a backend test that primes a live proxy bridge and asserts deletion closes it without scheduling a redial. |
||
|
Anso
|
5af0c043d5 |
fix(stack-files): record download metric when response closes after a full read (#1282)
The file-download handler recorded its in-process download metric off the source stream's end/close events. When the response consumer closed right after receiving the whole file, those source events could be dropped and the metric was never recorded, so the per-node download counter undercounted successful reads under load. Record the success directly on response close once the file has been fully read, instead of waiting on source events that may never arrive. The abort path (partial read) is unchanged and the recorder stays idempotent, so a later source end/close cannot double-count. Adds a deterministic regression test for the response-close-after-full-read path. |
||
|
Anso
|
dd2c2b22ec |
fix(federation): gate node cordon control on node:manage to match backend (#1277)
* fix(federation): gate node cordon control on node:manage to match backend
The cordon and uncordon control on the node card rendered whenever the
instance held an Admiral license, but the backend route also requires the
node:manage permission. Non-admin users without that permission (deployer,
viewer, auditor) saw a Cordon action the API rejected with 403. Gate the
control on the same permission the route enforces, so it renders only for
users who can use it.
Add developer-mode diagnostic logging to the cordon and pin handlers, and
route-level tests covering the cordon and uncordon permission, tier,
API-token, and input-validation boundaries.
* fix(federation): reject non-numeric node ids in cordon/uncordon
The cordon and uncordon routes validated the node id with parseInt, which
accepts numeric-prefix strings (parseInt('1abc', 10) === 1), so a request to
/api/nodes/1abc/cordon would operate on node 1. Require a strict positive
integer before parsing, and add tests for both routes.
* fix(federation): sanitize user-derived values in cordon and pin diagnostics
Route the node id, blueprint id, target node id, and reason length through
the shared log sanitizer before they reach the developer-mode diagnostic
log lines, and switch the format specifiers to %s to match. The values are
already validated integers, so this is defense in depth at the log sink and
keeps the diagnostics on the same sanitize-every-interpolated-value pattern
used elsewhere. No runtime behavior change: the lines stay gated behind the
developer_mode setting, off by default.
|
||
|
Anso
|
e60c1c0525 |
feat(fleet-snapshots): add restore-all, per-file download, and scrollable preview (#1276)
Three improvements to the Fleet Snapshots detail view, matching the admin-only access of the existing per-stack restore: - Restore all: a control in the snapshot header restores every captured stack across the fleet in one action, with an optional "redeploy all after restore" checkbox. Each stack is restored independently, so a failure on one (removed node, offline remote, blocked deploy) is reported per stack while the rest still proceed. Backed by POST /api/fleet/snapshots/:id/restore-all. - Per-file download: each compose or .env file in a snapshot can be saved to disk individually from its row. - Scrollable preview: the inline file preview is now a bounded, scrollable panel, so a long compose file can be read in full instead of being clipped. Remote restore and redeploy failures now carry the remote node's status and reason, so a per-stack failure in Restore all is actionable. |
||
|
Anso
|
9fb4ccccff |
fix(fleet-secrets): restrict bundle management to admin hub sessions (#1274)
* fix(fleet-secrets): restrict bundle management to admin hub sessions Fleet Secrets exposes decrypted environment-variable values and writes credentials across the fleet, so every route now requires an admin role, runs only on the instance you are signed into, and rejects long-lived API tokens: - Add an admin-role check to all secrets routes; the frontend Secrets tab renders only for admin users so the affordance matches the backend gate. - Add /api/secrets/ to the hub-only path list so a request carrying a remote node id cannot be proxied to read another node's decrypted values. - Reject API tokens on every secrets route (browser admin sessions only), matching how registry credentials are handled. Also adds lifecycle and developer-mode diagnostic logging (never the secret values) and tests covering the admin boundary on every endpoint, API-token rejection, hub-only enforcement, and diagnostic gating. * fix(fleet-secrets): require a signed-in user session for all secrets routes The earlier API-token rejection only blocked opaque API tokens. node_proxy and pilot_tunnel JWTs are mapped to an admin role by the auth middleware without an API-token scope, so they still passed the admin gate and could read decrypted bundles via GET /api/secrets/:id. Replace the API-token check with requireUserSession, which rejects API tokens and node_proxy / pilot_tunnel machine credentials (userId 0) on every secrets route, returning SESSION_REQUIRED. The admin role is still enforced after. Tests now assert SESSION_REQUIRED for a full-admin API token across all nine routes and for node_proxy and pilot_tunnel JWTs. * test(fleet-secrets): mint the rejection-test token via the real endpoint The machine-credential test reconstructed an API token by sha256-hashing a raw key inline. That duplicated a hashing sink that CodeQL's js/insufficient-password-hash query flags (a false positive for a 256-bit random token, but a new occurrence in the diff). Create the token through POST /api/api-tokens instead, so the hashing stays in the production path and the test carries none of its own. Behavior and coverage are unchanged. |
||
|
Anso
|
c11a550b6a |
fix(fleet-snapshots): gate reads on admin role and encrypt content at rest (#1273)
* fix(fleet-snapshots): gate reads on admin role and encrypt content at rest Fleet snapshots capture every node's compose.yaml and .env, so the data is as sensitive as the live stacks. This hardens access and reliability across the snapshot pipeline. - Restrict snapshot reads to administrators. GET /api/fleet/snapshots and /:id now require the admin role, matching create, restore, and delete; the Fleet "Snapshots" tab and its panel render only for admins. Previously any authenticated user could enumerate snapshots and read every node's .env. - Encrypt snapshot file contents at rest with the instance key. Restore and cloud-archive paths decrypt on read, so cloud archives stay portable and a database copy no longer exposes stack secrets in plaintext. Rows written before this change still read back as plaintext. - Surface partial captures. A stack whose compose file cannot be read or fetched, or a file over the 1 MB capture cap, is recorded as a warning and shown on the snapshot instead of being silently dropped, so a snapshot is never mistaken for complete. Remote .env read errors are now distinguished from a genuinely absent .env. Adds route-authz, capture-warning, and encryption round-trip tests; updates the Fleet-Wide Backups feature docs. * fix(fleet-snapshots): gate cloud snapshot reads on admin role The cloud snapshot read routes were guarded by provider/license only, not by role, while their write counterparts (upload, delete) already required admin and the Cloud Backup settings surface is admin-only. Because a downloaded archive contains plaintext compose and .env files, a non-admin could list and download cloud snapshots and read every node's secrets, the same exposure the local snapshot reads were just closed against. - Require admin on GET /api/cloud-backup/snapshots, /status/:id, and /object/:keyB64/download, matching the local snapshot reads and the admin-only Cloud Backup settings section. - When capturing a remote node, treat a 200 response carrying X-Env-Exists: false as a stack with no .env (matching the local ENOENT path) instead of storing an empty .env that restore would later write back. Adds non-admin authorization tests for the cloud read routes and a remote absent-.env capture test. |
||
|
Anso
|
0953025036 |
fix(fleet): gate node update actions to admins and harden update tracking (#1272)
* fix(fleet): gate node update actions to admins and harden update tracking Node update affordances now render only for admins, matching the admin-only routes behind them. Previously a non-admin could open the Fleet view and see the per-node Update button, Update all, retry, dismiss, and Recheck controls, then get a 403 on click. Those controls are now hidden for non-admins, who still see read-only update status. Both update-status clear routes (per-node and bulk) now require admin, and the bulk recheck throttles its forced "latest published version" lookup so a caller cannot loop it to hammer the upstream registries; the response reports whether the refresh actually ran so the UI can surface a "checked recently" note. Completion detection no longer reports a node as Updated when it merely blips offline and returns on the same version with an unchanged process start time. That case stays in progress and is decided by the existing early-fail and timeout heuristics, so a momentary network glitch is not mistaken for a successful update. Failed and timed-out updates now emit an operator-visible warning, and a periodic safety-net sweep bounds in-flight trackers when no client is polling for status. * fix(fleet): harden update completion and recheck failure handling Refinements from review of the node self-update hardening: - Completion signal 1 now requires a valid version, not merely a different one. A node whose /api/meta momentarily omits or mangles its version (online, same process) reported version=null, which compared unequal to the previous version and falsely marked the update completed. It now stays in progress and is decided by the early-fail/timeout heuristics. - Terminal resolution is atomic: it re-reads the live tracker and transitions only if it is still in flight with the same start time, so two concurrent status polls cannot both warn or clobber each other's transition. - The operator warning for a failed or timed-out update now redacts secret-shaped text (bearer/basic/token/password, credentialed URLs) from the underlying error before logging, in addition to stripping control characters. - The Recheck button now surfaces an error toast when the request throws (network or auth failure), matching the existing non-ok-response path instead of only logging to the console. |
||
|
Anso
|
7d7e0a6264 |
feat(fleet-sync): gate sync-status polling on admin role (#1271)
* feat(fleet-sync): gate sync-status polling on admin role The fleet sync status poll requires a paid admin on the server, but the useFleetSyncStatus hook only checked the paid tier. A paid non-admin who opened the Fleet Status tab or Settings, Nodes would poll the endpoint every 30 seconds and get a 403 each time, with the policy sync rows silently never loading. Gate the hook on both paid tier and admin role so the client mirrors the server and the request only fires when it can succeed. Also add a one-time log when an instance transitions from control to replica, and a real-database integration test covering the full receive path: role flip, identity and watermark persistence, wholesale row replacement with local rows preserved, replica read-only enforcement, and the stale-watermark and control-anchor rejection branches. Includes a hook test asserting the gate across the paid and admin matrix. * fix(fleet-sync): drop sync-status rows that resolve after the gate flips A sync-status fetch started while the user was an eligible paid admin could resolve after the user lost eligibility mid-flight (role or tier change), re-populating the status rows that the gate-false path had already cleared. That briefly re-enabled the policy-sync rows and the anchor-mismatch banner for a now-ineligible client. Track the latest gate state in a ref and skip the state writes when the fetch resolves after eligibility was lost, so the rows stay empty under role and tier transitions. Adds a regression test for the late-resolve path. * fix(security): sanitize control identity before logging replica transition The control to replica transition log interpolated the control fingerprint straight from the inbound sync payload, so a sibling pushing a forged controlIdentity with embedded CR/LF could split or spoof log lines. Wrap the value in the shared sanitizeForLog helper, matching every other tainted log sink, so control characters are stripped before the entry is written. |
||
|
Anso
|
7e0cffa376 |
fix(fleet-actions): stop-by-label works on Community remote nodes (#1270)
* fix(fleet-actions): stop-by-label works on Community remote nodes Fleet-stop's remote leg fanned out to POST /api/labels/:id/action, which is gated to Skipper/Admiral, so on a Community fleet the control node stopped its own stacks but every remote node returned 403. Fleet-stop itself is admin-only and available on every license, so the remote leg contradicted the feature's own gate. Extract the label-match plus bulk-stop logic into a shared runLocalLabelStop helper and add an admin-only, every-license POST /api/fleet-actions/labels/local-stop receiver. The control now fans out to that receiver, so remote stacks stop on every tier. Each node runs under its own per-node bulk lock, so a fleet-stop and a per-label action still serialize cleanly instead of double-stopping containers. Also degrade the control's own leg per-node instead of failing the whole fan-out when its filesystem read throws, and gate fleet-stop and fleet-prune diagnostics behind developer_mode. Tests: local-stop auth, tier, validation, and behavior; a remote-leg routing guard that asserts the fan-out targets local-stop and never the paid route; local-leg graceful degradation; and the three Fleet Action card UIs. * fix(fleet-actions): honor the remote stop receiver's matched flag The control reached the remote leg only because its own mirror had the label, then hardcoded matched:true and trusted results without guarding its shape. A mirror-skewed control (mirror has the label, remote does not) then showed a remote mismatch as "matched, 0 stacks" instead of "no matching label", and a malformed 200 body could flow a non-array into the per-stack renderers. Honor the remote's own matched flag and coerce results to an array when the body is malformed. Add regression tests for the matched:false skew case and the non-array results case. |
||
|
Anso
|
085267b466 |
feat(security): make CVE suppressions optionally honored by deploy-block policies (#1269)
* feat(security): make CVE suppressions optionally honored by deploy-block policies
Block-on-deploy policies evaluate the raw scan result, so a CVE an admin
has accepted in CVE Suppressions still blocks the deploy. Add an opt-in,
per-instance toggle ("Honor suppressions in deploy blocks", Settings ->
Security) that, when on, re-derives each image's severity from the
suppression-filtered findings before comparing to the policy threshold. A
deploy that proceeds only because suppressions dropped it below the gate is
recorded in the audit log. Default off, so the strict raw-scan behavior is
unchanged unless an operator enables it.
The setting governs the instance that runs the deploy and is not
fleet-replicated. The gate fails safe: a suppression-read error or an
empty detail set falls back to raw scan severity rather than dropping it.
Also surface a previously swallowed error in the CVE suppressions and
misconfig acknowledgement settings panels so a failed list load shows a
toast instead of an empty list.
* fix(security): gate on raw severity when preflight detail rows are truncated
The suppression-aware deploy gate re-derived image severity from the stored
vulnerability_details rows, assuming any non-empty set was complete. A cached
pre-deploy scan keeps the full aggregate counts but copies only a bounded slice
of detail rows, so recomputing from that slice could drop an unsuppressed
blocking CVE below the threshold and let a deploy through.
Guard the recompute: when the loaded detail rows do not match the scan's total
finding count, gate on the raw scan severity (never drops severity). Suppression
awareness still applies for scans whose details are stored in full, which is the
common case.
|
||
|
Anso
|
d8f73f8203 |
feat(fleet): show stack-label filtering in Fleet View on every tier (#1268)
* feat(fleet): show stack-label filtering in Fleet View on every tier Stack labels and their assignments are a Community feature: the per-node label reads are available to any authenticated user and are already used in the per-node Stacks view. Fleet View, however, only fetched the fleet-wide label palette and per-stack chips when the instance was on a paid tier, so a Community user who had labelled their stacks saw no label dots on node cards and no Tags filter in the Overview toolbar. Drop the paid gate on the fleet label fetch so the palette, the per-stack chips, and the Tags filter render for everyone who has labels. Node-level tag aggregation (used for topology grouping) stays paid and is unchanged. * fix(fleet): surface update-status failures and soften the reconnect timeout Three reliability fixes in the Fleet View update path: - The fleet update-status poll swallowed fetch errors in an empty catch, so a failing poll left a silently stale table with no breadcrumb. It now logs the failure (both thrown errors and non-ok HTTP responses) without toasting on every tick, and keeps the last-known statuses. - The local-update reconnecting overlay declared "Update timed out" after five minutes, which falsely reported failure when a large image pull simply ran longer than the reconnect window. It now shows a non-failure "Taking longer than expected" state with a "Reload to check" action, and the timeout is a named constant that mirrors the backend update timeout. - The fleet overview fan-out already logged a node that failed to report; the update-status and update-all fan-outs now log the rejected node and reason too instead of discarding it. * test(fleet): backfill Fleet View hook, component, and update-tracker coverage Adds unit and component coverage for the previously untested Fleet View surface: all six Overview hooks (overview, update-status, polling cadence, preferences, fleet labels, node labels), the NodeCard, OverviewTab, OverviewToolbar, NodeUpdatesSheet, UpdateStatusBadge, and ReconnectingOverlay components, and the FleetUpdateTrackerService state transitions. * test(fleet): assert update-status poll preserves last-known statuses on failure Adds an explicit case that seeds statuses from a successful poll, then fails the next poll, and verifies the table keeps the seeded statuses (and logs without toasting) rather than relying on the implementation implicitly. |
||
|
Anso
|
18762fa74b |
fix(registries): keep registry endpoints local to each instance (#1267)
Registry credentials are stored and resolved per instance, and the UI only ever calls registry endpoints with localOnly. The endpoints were not on the hub-only proxy list, so a scripted request carrying an x-node-id for a remote node would be forwarded by the remote proxy, carrying a plaintext registry secret to (or reading stored credentials from) the remote instance. Add /api/registries/ to HUB_ONLY_PREFIXES so a remote-targeted registry request is rejected with 403 before the proxy can forward it, matching the existing defense-in-depth for the audit log, schedules, and the global logs feed. Add regression tests for the collection, a sub-path, and the local pass-through. Correct a stale 409 reference in the guard comments and test header to the 403 the guard actually returns. |
||
|
Anso
|
b61388c675 |
fix(rbac): enforce admin seat cap on promotion and harden last-admin and audit paths (#1266)
Promoting a user to admin now respects the per-tier admin seat limit the same way user creation does, closing a path that let an operator exceed the cap by creating an account and then editing its role to admin. The last-admin guard for demote and delete now runs the admin-count re-check and the write in a single transaction, so two concurrent admin changes can no longer race the admin count to zero and lock everyone out. Admin two-factor resets are now recorded once with their own audit summary instead of being mislabeled as a user creation by the audit middleware. |
||
|
Anso
|
d4fa4a4965 |
fix(host-console): audit session lifecycle and harden path, resize, and route gating (#1263)
* fix(host-console): audit session lifecycle and harden path, resize, and route gating Record an audit-log entry when a host console session opens and when it closes (capturing user, node, client IP, and timestamp), so interactive host-shell access leaves a durable, accountable trail instead of only an ephemeral log line. Fix a stack-path boundary check that allowed a sibling directory sharing the base path's prefix to pass; directory resolution now uses the canonical within-base check via a small testable helper. Validate terminal resize frames (positive integers within a sane bound) before forwarding them to the PTY, dropping malformed frames instead of passing them through. Mirror the backend admin-only console permission on the frontend route so a non-admin who reaches the view cannot mount a console the server would reject, and log (rather than silently swallow) a working-directory resolution failure. Add unit coverage for the path helper, audit open/close rows, resize validation, and the spawn-error path, plus a WebSocket-upgrade integration test exercising the full gate chain and a live session-open audit row. * fix(host-console): record the node the shell actually runs in When the requested node's directory cannot be resolved, the session falls back to the default node's base directory. Record that fallback node in the session audit row (and log it) so the audit trail names the node the shell actually runs in rather than the originally requested one. Strengthen the upgrade integration test to assert the open row captures the user, node, and client IP. |
||
|
Anso
|
7e65a2ae19 |
fix(mfa): enforce single-use backup codes under concurrent verification (#1262)
* fix(mfa): enforce single-use backup codes under concurrent verification Backup-code consumption read the stored hash set, awaited bcrypt.compare, then wrote the shrunk set back. Two concurrent /login/mfa requests carrying the same code could both read the same set, both match, and both persist, so a single backup code yielded two authenticated sessions. Move consumption into a synchronous transaction: verifyBackupCode now returns the matched hash without mutating state, and a new consumeBackupCodeHash re-reads and shrinks the set atomically, returning whether the hash was still present. Login gates success on that result, so exactly one concurrent request wins. Reshape the verify result into a discriminated union so a match always carries its hash. Add coverage: a deterministic consume test (same hash twice, distinct hashes, absent hash), a concurrent same-code login race, backup-code exhaustion, and a disable-via-backup-code path. * test(mfa): make the concurrent backup-code test deterministic The race test relied on incidental scheduling to interleave the two requests, so it could false-green if they happened to serialize. Add a barrier that holds both requests just after verification (once both have read the same stored set) until both arrive, then releases them into the atomic consume. This forces the race every run, so the test fails against a non-atomic consume and passes only when exactly one request wins. A timeout releases the barrier if only one request arrives, so a setup fault fails loudly instead of hanging. |
||
|
Anso
|
d03d97d964 |
fix(nodes): close capability-gating gaps in node compatibility (#1261)
* fix(nodes): close capability-gating gaps in node compatibility Vulnerability scanning is now gated correctly on whether the active node advertises support for it: - A node without the Trivy binary stops advertising the scanning capability. Previously the capability was toggled only on a state change, so a node that booted without Trivy kept advertising scanning it could not perform. - The control node's own capability list now reflects features disabled at runtime, matching what it advertises to peers. - The scan history surface shows a clear "not available on this node" card, with its header actions hidden, instead of attempting a request that fails. A node's version and capability metadata now refreshes immediately after a connection test or a completed update, rather than waiting out the cache. Capability gates fail closed to the unavailable card when a node's metadata request errors, instead of staying open until the next fetch. Adds a test that fails if the frontend and backend capability lists drift, plus coverage for the metadata error path, the runtime-disabled local meta, the scanning capability sync, and the metadata cache invalidation paths. * fix(nodes): refresh node metadata client-side after a connection test A connection test dropped the server-side metadata cache, but the dashboard kept its own cached copy until the client TTL expired, so version and capability gates could stay stale in the browser. The test now forces a client-side metadata refresh for that node, so the version pill and gates reflect the node's current state immediately. Also strips any URL userinfo before logging the metadata fetch target, and makes the scanning-capability detection test deterministically exercise the no-binary disable path rather than depending on whether the runner has Trivy. |
||
|
Anso
|
6fc7f200a6 |
fix(scheduled-ops): run stack lifecycle schedules on remote nodes and harden run visibility (#1260)
* fix(scheduled-ops): run stack lifecycle schedules on remote nodes and harden run visibility Stack lifecycle schedules (Restart, Stop, Take Down, Start, Backup Stack Files) now run against whichever node the schedule targets, local or remote. Each remote run proxies to that node's own stack-operation endpoint, so a hub-managed schedule reaches the node that actually holds the stack. Restart with a service subset restarts each selected service and, if one fails, names the services already restarted so run history reflects the stack's partial state. Auto-start on a remote node runs that node's own pre-deploy scan-policy check against the images it holds. Add POST /api/stacks/:name/backup to trigger an on-demand backup of a stack's compose and env files (the same rollback snapshot a deploy takes); it backs the remote backup schedule and is available to operators on its own. A scheduled task that reaches execution on an unpaid licence is now skipped and written to run history as a failed run, so a manual trigger that returned a queued response never silently disappears. Test plan: - Backend unit + integration: scheduler-service (remote proxy per action, per-service fan-out, auto-start policy delegation, remote-failure and no-credentials paths, unpaid-tier skip), stack-backup-route (auth/role/paid/404/400/500), scheduled-tasks-routes. - Frontend component test for the schedules view (list, prefill, node filter, create payload). - tsc and lint clean on both packages. * fix(scheduled-ops): lock the stack-files backup route against concurrent stack ops The stack-files backup writes the same slot the pre-deploy rollback snapshot uses, so running it while a deploy, update, or rollback is in flight on the same stack could overwrite the rollback point. The backup route now takes the per-stack operation lock (as deploy/down/restart do) and returns 409 when the stack is busy, keeping the rollback snapshot intact. Adds the 'backup' action to the stack-op lock type and a busy participle for the 409 message. * fix(scheduled-ops): enforce backup-path containment inline at the filesystem sink The on-demand backup route passes the stack name straight into backupStackFiles, so resolve the backup directory against the backup root and confirm containment with an inline startsWith check before the mkdir/copy/write sinks, matching the barrier restoreStackFiles already uses. The stack name is validated at the route and again by resolveStackDir, so this is defense in depth that also closes a static path-injection finding on the new call path. |
||
|
Anso
|
5e66b54153 |
fix(audit-log): neutralize CSV export injection, clamp pagination, bound anomaly history (#1259)
* fix(audit-log): neutralize CSV export injection, clamp pagination, bound anomaly history Harden the Admiral audit log without changing its tier or hub-only gating. - CSV export now defuses formula injection: any field that a spreadsheet would evaluate as a formula (leading = + - @, or a trigger behind leading whitespace, or a leading tab/CR) is prefixed with a single quote before RFC 4180 quoting. Audit summaries embed user-controlled resource names, so this closes a path where a crafted name could execute on export open. - Clamp page and limit to positive bounds on the list endpoint so a negative limit can no longer reach SQLite as "unlimited" and dump the whole table. - Bound the anomaly and stats history reads to a capped slice of recent rows so the analysis paths stay within fixed memory and latency on large histories instead of scanning the full retention window per request. - Surface failed audit list and stats fetches through the standard error toast instead of leaving the view silently stale. - Add a developer-mode-gated diagnostic log to the stats endpoint for parity with the list and export handlers. Covered by new unit and HTTP-integration tests (CSV neutralization through the real export route, pagination clamps, bounded history, stats endpoint, anomaly annotation) and verified end to end in the browser. * fix(audit-log): compute signal-rail stats with exact SQL aggregates Address review feedback on the earlier history-cap change. The cap was correct for the anomaly baseline but made the stats tiles (events, actors, failure rate, hourly series) silently undercount on a hub with more than the cap's worth of rows in the window, since they were derived from the capped row slice. - Add DatabaseService.getAuditStatsInputs: exact counts via SQL COUNT / COUNT(DISTINCT) / GROUP BY hour, and new-ip detection over the small DISTINCT (user, ip) pair sets. No row cap, so the tiles stay exact at any window size while memory stays bounded. - Reduce computeAuditStats to a pure formatter over those aggregates. - Keep the bounded history read only for the list endpoint's anomaly annotation, where a recent-activity baseline is an acceptable heuristic. - Skip the redundant load-failure toast when a fetch fails with a handled 401, so an expired session does not stack toasts on top of logout. Adds exactness tests for the aggregate counts, distinct-actor handling, and new-ip detection, and strengthens the pagination-clamp tests. * fix(audit-log): exclude future-dated rows and make the new-ip sample deterministic Two small parity fixes on the stats aggregates: upper-bound every current window by `now` so a future-dated row (clock skew or a fixture) cannot inflate the live counts, and order the new-ip pair scan so the sample actor shown in the tile detail is stable. Adds a test asserting a future row is excluded. |
||
|
Anso
|
dbb7fe8215 |
feat(auto-heal): restart crashed containers and harden the heal loop (#1258)
* feat(auto-heal): restart crashed containers and harden the heal loop Auto-Heal now restarts containers that crash (non-zero exit) and stay down past the policy threshold, in addition to those that fail their Docker healthcheck. Crash detection reuses the container event classifier so a container that exits cleanly or that an operator stopped is never restarted; only classified crashes set the heal signal. Also hardens the existing loop: - A paid controlling instance refreshes proxied remotes' entitlement on a background interval so a remote node's policies keep evaluating between operator visits instead of lapsing a few minutes after the sheet was last opened. A node that stays unreachable surfaces a warning. - Overlapping policies (all-services plus a service-specific one) restart a given container at most once per evaluation pass, so the hourly cap holds. - A failed restart now counts toward the cooldown and hourly cap, so a broken setup is retried on the cooldown interval rather than every poll. - Diagnostic logging behind developer mode for evaluation, heal decisions, timing, and lease refresh. * docs(auto-heal): document crash healing and refresh troubleshooting Cover the two heal conditions (unhealthy and crashed), note that clean exits and operator stops are never restarted and that crash healing acts on crashes observed while Sencho is running, and update the troubleshooting and tab visibility entries accordingly. * fix(auto-heal): close stale crash-signal race and harden lease refresh A crash signal could outlive the crash it described. The exit classifier is deferred 500ms, so an immediate restart could let it stamp the crash marker after the container was already running, and a later clean or operator-initiated exit did not clear it; the next poll could then restart a container that had exited cleanly. Now a clean or intentional exit always clears the marker, a die that a start has superseded is not stamped, and the die's own time is captured at arrival rather than at the deferred classification so the supersede check is accurate. Also: - Crash state survives the event service's idle-prune window, so crash healing works for any configured threshold rather than only short ones. - An exited or dead container is matched before any health-text parsing, so it can never fall into the healthcheck path. - A remote with no reachable proxy target counts toward the lease-refresh failure warning instead of being silently skipped. |
||
|
Anso
|
ca346916c1 |
fix(auto-update): paid-gate execute route and harden image-check watchdog (#1257)
* fix(auto-update): paid-gate execute route and harden image-check watchdog Auto-update execution is a paid capability, but POST /api/auto-update/execute was reachable by any admin regardless of license. Add the paid guard so it matches the rest of the surface (scheduled-task management and fleet refresh). The scheduler dispatch to remote nodes still works because the controlling instance forwards its tier with the request. Restrict GET /api/image-updates/fleet to admins. The single-node status endpoint that drives the sidebar update dot stays open to all roles. Replace the image-check watchdog timer that released the run lock after five minutes. On a healthy but slow scan it let a manual refresh start a second concurrent check, duplicating notifications and racing the status writes. The scan now owns its lock for its full duration, and every Docker socket and filesystem read is bounded so a wedged daemon or mount cannot stall a scan forever. * test(auto-update): assert the debug skip-log branch in the image-check guard The concurrency-guard test covered the warn branch for a trigger arriving past the long-run threshold but never exercised the developer-mode debug skip log. Add a case that enables developer mode and asserts the debug line fires for a mid-scan trigger under the threshold. |
||
|
Anso
|
7d4e61625f |
fix(notifications): harden alert dispatch crash-safety and redact webhook secrets in logs (#1255)
* fix(notifications): harden alert dispatch crash-safety and redact webhook secrets in logs Make NotificationService.dispatchAlert never reject so the many fire-and-forget callers (monitors, event streams, policy and image-update paths) cannot trigger an unhandledRejection on an unhealthy database. The whole dispatch body now sits inside a guard covering node resolution, the history insert, channel-table reads, and the WebSocket broadcast; a failure logs and drops the notification instead of crashing the process. An inner guard still splits the write-success and write-failure metrics. Also: - Redact webhook URLs in diagnostic logs via a new maskWebhookUrl helper; Discord/Slack/custom webhook URLs embed their token in the path, so only the origin is safe to emit. - Add error logging to four notification-history route handlers that previously swallowed database errors silently before returning 500. - Snapshot the subscriber set before broadcasting so a close/error handler firing mid-send cannot mutate the set during iteration. - Sanitize the admin-supplied route name in dispatch log lines. Adds tests for dispatch crash-safety (write failure, post-write routing failure, broadcast send failure), the success-path write metric, webhook URL masking, and history-route error logging. * fix(notifications): sanitize route name and patterns in create logs Apply sanitizeForLog to the admin-supplied route name and stack patterns in the route-creation log lines, matching the dispatch-site sanitization and closing the remaining log-injection path on this feature. Also extend tests: userinfo-stripping in maskWebhookUrl, subscriber-set snapshot behavior under an unsubscribe-during-send, and error logging on the mark-read, delete-one, and clear-all notification-history handlers. |
||
|
Anso
|
69edb0dcbb |
fix(observability): gate global logs to admins, scope to managed containers, harden SSE (#1254)
* fix(observability): gate global logs to admins, scope to managed containers, harden SSE Make the Logs feed an administrator view enforced on both sides (requireAdmin on the /api/logs/global poll and SSE routes; the Logs nav item plus a redirect guard on the frontend), and scope the feed to Sencho-managed containers only via a shared isManagedByComposeDir helper that /stats now reuses. Harden the SSE stream: a stateful frame demuxer that survives chunk boundaries so a Docker frame split across reads is reassembled instead of dropped or garbled; a per-stream error listener so one broken follow stream cannot crash the event loop (it posts a single degraded notice and keeps the others alive); a cap on concurrent follow streams with a truncation notice; a bounded initial tail; and backpressure that pauses the source streams when the client is slow and resumes on drain. Bound the polling snapshot's per-container fan-out with a concurrency limit. Add process-local, in-memory log-stream counters exposed at the admin-only /api/system/log-stream-metrics endpoint (active connections, lines streamed, attach and frame errors). Collapse the view to the local hub and remove the dead remote-node handling. * fix(observability): close remote-proxy bypass of the global-logs admin gate The logs feed's requireAdmin lives in the local route handler, which the remote proxy skips when forwarding a request whose nodeId targets a remote node. A hub user could therefore request /api/logs/global*, /api/logs/global/stream, or /api/system/log-stream-metrics with x-node-id (or ?nodeId= for the SSE transport) pointing at a remote node and have it served as the node-proxy admin on the far side, sidestepping the gate entirely. Add these paths to HUB_ONLY_PREFIXES so hubOnlyGuard rejects a remote nodeId with 403 before the proxy runs, matching the existing protection on audit-log, scheduled-tasks, and notification-routes. Add regression tests covering the collection path, the SSE sub-path (both the x-node-id header and the ?nodeId= query transport), and the stream-metrics endpoint. |
||
|
Anso
|
d41282e352 |
fix(blueprints): gate Federation pin control on admin role (#1252)
* fix(blueprints): gate Federation pin control on admin role The Federation tab rendered an editable pin control to any Admiral-tier user, but PUT /api/blueprints/:id/pin requires admin role, so a non-admin Admiral user saw a dropdown that returned 403 on use. Thread the admin flag into FederationTab and render the pin placement read-only (with an administrator-required hint) for non-admins, matching the existing canEdit pattern in the Deployments tab. The backend guard already enforced admin; this aligns the UI affordance with it. Add backend coverage for the tier/role authorization matrix across the blueprint routes, remote-node deploy/withdraw ordering and failure mapping, edge cases (disable-with-active 409, selector cap, marker drift, cross-blueprint withdraw refusal), service developer-mode diagnostics, and a frontend render-gate test for both admin and non-admin states. * fix(blueprints): gate Apply action on admin role in blueprint detail The blueprint detail sheet rendered an enabled "Apply now" control to any paid user, but POST /api/blueprints/:id/apply requires admin. Gate the primary action on canEdit so it matches the already-gated Edit / Disable / Delete actions and the backend guard; non-admins keep a read-only detail view. Add a render test covering both the admin and non-admin action bars. Also strengthen the remote-deploy ordering test to assert global call order across spies (create < compose < marker < deploy) via invocationCallOrder, not just per-method indices. |
||
|
Anso
|
eed7e04e71 |
fix(resources): harden Resources Hub data race, prune errors, and scan lifecycle (#1251)
* fix(resources): harden Resources Hub data race, prune errors, and scan lifecycle Guard fetchAllData with a generation counter so switching nodes mid-load cannot let a stale fetch overwrite the newly selected node's resources. handlePrune now checks res.ok and surfaces the server error instead of showing a false success toast on a failed prune, matching the delete and purge handlers. Make the vulnerability-scan poll loop abort-aware via an AbortController that cancels on unmount and on node switch, dismissing the loading toast and avoiding state updates after the view is gone. Add developer-mode diagnostic logging to the prune, network-create, and volume list/read paths, gated by the existing developer_mode setting and never logging file bodies or secrets. Add regression tests covering the node-switch race and the prune error path. * fix(resources): make scan-poll abort cancel in-flight requests and guard parse window Thread the scan AbortController signal into the scan POST, status poll, and image-summaries fetches so an abort cancels the in-flight request and the loading toast clears promptly instead of after the request settles. Add abort checks after each response-body parse so an abort landing during JSON parsing cannot fire a stale completion toast, open the scan sheet, or write summaries for a node the user already left. Bump the fetch generation on unmount so a fetchAllData that resolves after the view is gone drops its state writes and load-error toast. Add a regression test for the post-unmount load-failure path. |
||
|
Anso
|
96c5f05cdc |
fix(app-store): harden template deploy, registry fetch, and catalogue refresh (#1250)
* fix(app-store): harden template deploy, registry fetch, and catalogue refresh Serialize generated compose through the YAML emitter so registry-supplied values are escaped correctly instead of interpolated into hand-built lines. Cap the registry response size so an oversized or runaway catalogue cannot exhaust backend memory, and surface the fetch failure to the caller. Reload the catalogue when the active node changes, since the registry is node-scoped. Add developer-mode deploy diagnostics (counts only, no values) and extend the unit tests with YAML round-trip, LinuxServer.io mapping, and size-cap coverage. * fix(app-store): reset node-scoped catalogue state on fetch and bound deploy diagnostics Clear the templates list and Trivy availability at the start of each catalogue load so a failed fetch after a node switch shows the new node's empty state instead of the previous node's catalogue or scan toggle. Bound the developer-mode diagnostic template title/source length, and document that the registry cache serves the last-known-good catalogue on a transient fetch failure (the size cap still protects memory in every case). |
||
|
Anso
|
2844f606cd |
fix(git-sources): harden webhook delivery, transport errors, and clone limits (#1249)
* fix(git-sources): harden webhook delivery, transport errors, and clone limits Map webhook-pull outcomes to real HTTP status codes (200 success, 202 debounced, 404 no source, 422 failure) instead of always returning 200, so a Git provider and any monitoring on it can tell when a delivery actually failed. Close a concurrent webhook fan-out gap: the debounce window is now re-checked inside the per-stack lock, so simultaneous deliveries for one push run a single clone instead of one per request. The whole pull/apply critical section runs under a single lock acquisition. Unwrap fetch transport causes (ENOTFOUND, ECONNREFUSED, ECONNRESET, TLS) so a clone failure surfaces an actionable, host-qualified message instead of a bare "fetch failed". Cap how many bytes a single clone may download to protect the host disk; operators can tune it with GITSOURCE_MAX_CLONE_BYTES (default 100 MB). Log webhook pull failures server-side, since the webhook path is unattended. * test(git-sources): assert surfaced host via toContain to satisfy CodeQL * fix(git-sources): bound per-file read, treat debounced webhooks as non-failure, correct clone-cap docs * docs(git-sources): correct clone-cap comment to describe a download bound, not disk |
||
|
Anso
|
b33a0e8422 |
fix(deploy-enforcement): surface scan-policy blocks on update and sidebar deploys (#1248)
* fix(deploy-enforcement): surface scan-policy blocks on update and sidebar deploys A blocked deploy only opened the policy dialog from the editor deploy button. The update action and the sidebar context-menu deploy/update fell through to a generic error toast, so an admin could not review the violations or bypass the block from those entry points. Route the 409 policy response through a shared handler on all three paths and make the "Deploy anyway" bypass retry the originating action (deploy or update) so an update bypass still re-pulls images. Also: - Correct the "Block on deploy" policy-editor helper text, which described post-deploy alerting rather than the pre-flight rejection it actually performs. - Dispatch the documented scan_finding warning (policy name and the offending images) when a scheduled auto-update or auto-start is blocked, instead of recording an opaque failure. - Add a standard log line when the gate blocks a deploy, plus developer-mode diagnostics for the matched policy and per-image severity decision. - Fix deploy-enforcement docs: complete the enforced entry-point list, correct the policy-precedence wording, and remove inaccurate tier and audit-actor claims. * fix(deploy-enforcement): surface policy block on rollback and name images in remote auto-update alert Addresses two gaps found in independent review: - Rollback is a policy-gated deploy path (it restores the saved files then re-runs the gate before redeploying), but the frontend treated a blocked rollback as a generic error toast. Route the 409 through the same handler as deploy and update so the block dialog opens, and let an admin "Deploy anyway" retry the rollback with the bypass flag (the rollback route already honors it). - The remote auto-update path dispatched its policy-block warning without the offending image refs, unlike the local scheduler. Append the images so the alert matches the documented contract on every node. Also list rollback as an enforced entry point in the docs and clarify that Git Source enforcement covers both the create-time deploy and a manual apply-with-deploy. |
||
|
Anso
|
45844b92ca |
fix(atomic-deploy): harden rollback locking, restore fidelity, and tier gating (#1247)
* fix(atomic-deploy): harden rollback locking, restore fidelity, and tier gating Hardens the Atomic Deployments feature found during a full audit: - Rollback now holds the per-stack lifecycle lock (deploy/update already do), so a rollback can no longer race a concurrent deploy on the same compose files. Adds a 'rollback' lifecycle action and releases the lock in finally. - restoreStackFiles is now a faithful revert: it removes managed compose/.env files added after the backup before copying, so a rollback no longer leaves a hybrid of old and new configuration. Scope is the protected file set only; user data is untouched. Aborts (rather than reporting success) if a stale managed file cannot be removed. - The scheduled image-update path derives the atomic flag from the licence tier instead of hardcoding it on, keeping the paid capability explicit at the call site (the scheduler is already paid-gated; this prevents silent drift). - The backup-metadata read (GET /stacks/:name/backup) now requires a paid licence, matching the rollback flow that is the only caller. - Manual rollback dispatches a success/failure notification, alongside the existing audit-log entry. Adds route integration tests (lock acquisition/release, tier 403, notifications, no-backup 404), filesystem tests for the faithful restore (orphan removal, variant switch, abort path, non-managed files preserved), a community-tier scheduler test, and a developer-mode logging matrix. Documents the restore semantics and reconciles the scheduled-update wording in the feature guide. * fix(atomic-deploy): assert restore target stays within the compose dir before unlink The orphan-removal step in restoreStackFiles joins the stack directory with a managed filename and unlinks it. The stack directory is already validated and contained by resolveStackDir (allowlist stack name + within-base assertion), but the containment guard was not reapplied to the joined target at the delete sink, so static analysis flagged the path as derived from user input. Reassert containment on the final path before unlinking, matching the barrier the other write/read helpers in this service already apply. No behavior change for valid stacks; defense-in-depth at the sink. * fix(atomic-deploy): inline the path-containment barrier at the restore unlink sink The wrapped within-base assertion was not recognized as a sanitizer by the static path-injection analysis, which still traced the stack name to the unlink sink. Replace it with the inline path.resolve + startsWith containment check the other write helpers in this service already use (the recognized barrier), kept in the same scope as the sink. Behavior is unchanged for valid stack names. * fix(atomic-deploy): clear stale managed files from the backup slot before writing The backup directory is reused across runs and was only ever added to, never cleared. A managed file removed from the stack since the last backup (e.g. a deleted .env or a switched compose variant) lingered in the slot, so a later rollback restored a file that did not exist immediately before the failed run, contradicting the faithful-revert guarantee. Clear the protected file set from the slot before copying the current files, with the same inline containment barrier the restore path uses. A clear failure is logged, not fatal, since it only risks a stale future rollback and should not block a valid deploy. |
||
|
dependabot[bot]
|
1074d523b2 |
chore(deps): bump the all-npm-backend group in /backend with 4 updates (#1240)
Bumps the all-npm-backend group in /backend with 4 updates: [isomorphic-git](https://github.com/isomorphic-git/isomorphic-git), [typescript-eslint](https://github.com/typescript-eslint/typescript-eslint/tree/HEAD/packages/typescript-eslint), [@aws-sdk/client-ecr](https://github.com/aws/aws-sdk-js-v3/tree/HEAD/clients/client-ecr) and [@aws-sdk/client-s3](https://github.com/aws/aws-sdk-js-v3/tree/HEAD/clients/client-s3). Updates `isomorphic-git` from 1.38.1 to 1.38.3 - [Release notes](https://github.com/isomorphic-git/isomorphic-git/releases) - [Commits](https://github.com/isomorphic-git/isomorphic-git/compare/v1.38.1...v1.38.3) Updates `typescript-eslint` from 8.59.4 to 8.60.0 - [Release notes](https://github.com/typescript-eslint/typescript-eslint/releases) - [Changelog](https://github.com/typescript-eslint/typescript-eslint/blob/main/packages/typescript-eslint/CHANGELOG.md) - [Commits](https://github.com/typescript-eslint/typescript-eslint/commits/v8.60.0/packages/typescript-eslint) Updates `@aws-sdk/client-ecr` from 3.1053.0 to 3.1054.0 - [Release notes](https://github.com/aws/aws-sdk-js-v3/releases) - [Changelog](https://github.com/aws/aws-sdk-js-v3/blob/main/clients/client-ecr/CHANGELOG.md) - [Commits](https://github.com/aws/aws-sdk-js-v3/commits/v3.1054.0/clients/client-ecr) Updates `@aws-sdk/client-s3` from 3.1053.0 to 3.1054.0 - [Release notes](https://github.com/aws/aws-sdk-js-v3/releases) - [Changelog](https://github.com/aws/aws-sdk-js-v3/blob/main/clients/client-s3/CHANGELOG.md) - [Commits](https://github.com/aws/aws-sdk-js-v3/commits/v3.1054.0/clients/client-s3) --- updated-dependencies: - dependency-name: isomorphic-git dependency-version: 1.38.3 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: all-npm-backend - dependency-name: typescript-eslint dependency-version: 8.60.0 dependency-type: direct:development update-type: version-update:semver-minor dependency-group: all-npm-backend - dependency-name: "@aws-sdk/client-ecr" dependency-version: 3.1054.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: all-npm-backend - dependency-name: "@aws-sdk/client-s3" dependency-version: 3.1054.0 dependency-type: direct:production update-type: version-update:semver-minor dependency-group: all-npm-backend ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Anso <dev@saelix.com> |
||
|
Anso
|
5dea040ec8 |
fix(deploy-progress): decouple deploys from the live progress stream (#1246)
* fix(deploy-progress): decouple deploys from the live progress stream The deploy progress modal streamed compose output over a WebSocket, but the deploy itself was coupled to that socket in two ways that could break or silently abort a deploy: - The deploy request was gated on the progress socket connecting, so any upgrade failure (a reverse proxy blocking WebSocket upgrades, or the admin-only stream rejecting a scoped deployer) left the modal stuck on "Connecting..." and the deploy never fired. - The backend terminated the running compose process when that socket closed, so minimizing the modal, navigating away, or a network blip aborted an in-flight deploy. Make the progress socket output-only: the deploy is owned by its request and runs to completion (or the existing command timeout) regardless of the stream. The modal now degrades to a "Live progress unavailable" state and still reports success or failure from the request result. Connect failures, drops, and a connect timeout all release the deploy instead of blocking it. Also route progress output per deploy: the frontend sends a correlation id on both the connectTerminal message and the deploy request header, and the backend keys progress sockets by that id so concurrent deploys from different tabs or users no longer cross-stream each other's output. Cap the in-memory parsed log rows so a very long deploy cannot grow the modal's state unbounded. * fix(deploy-progress): generate the deploy session id with a CSPRNG The per-deploy correlation id keys which WebSocket receives a deploy's live output, so a guessable id lets one authenticated client register a victim's id and read its compose output. It was built from Math.random() plus a timestamp, which is not cryptographically secure. Generate it with crypto.getRandomValues (128 bits, hex). That is the one Crypto member available in insecure contexts, so it still works over LAN HTTP where crypto.randomUUID is unavailable. * fix(deploy-progress): stop headerless ops bleeding into a keyed progress modal Address review findings on the progress-stream routing: - Only an id-less connectTerminal registration may become the id-less fallback socket. Previously every connectTerminal (including keyed deploy modals) set the fallback, so a headerless operation (bulk update, rollback, or a legacy client) resolved via getTerminalWs() into another user's keyed deploy modal. Keyed sockets are now excluded from the fallback, and a socket that adopts a session id is removed from it. - The connect-timeout fallback now also flags the modal as "Live progress unavailable" instead of leaving it on "Connecting..." while the deploy runs. - Log only a short prefix of the deploy session id in developer diagnostics, not the full capability value. |