mirror of
https://github.com/Studio-Saelix/sencho.git
synced 2026-08-10 02:41:14 +00:00
fbe98676cb8a0d0021873cfa768adaf8c1455946
22 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Anso
|
fbe98676cb |
feat: bound container health pane so logs stay visible on large stacks (#1556)
* feat: bound container health pane so logs stay visible on large stacks On the stack overview page, multi-container stacks (8+ services) pushed the logs pane off-screen because the Command Center card had shrink-0 and no scroll mechanism. This reworks the desktop layout for stacks with more than one container: - The Command Center card is bounded at max-h-[42%] so it never consumes the full left column. The container list scrolls internally via Sencho's existing Radix ScrollArea. - A summary strip shows total / running / paused / unhealthy counts above the list, with a Compact / Detailed density toggle. Detailed (default) shows CPU / Mem / Net sparklines; Compact hides them for a denser list. - The logs pane has a guaranteed min-h-[180px] so it is always reachable. - Single-container stacks are untouched: the card keeps its original shrink-0 behaviour, and no summary strip or density toggle appears. Mobile is unaffected (it already uses segmented Health / Logs / Compose panes). * fix: key ContainersHealth by node+stack so density resets on navigation The density toggle state (compact/detailed) is local to ContainersHealth. Without a key, selecting Compact on one multi-container stack would persist when navigating to a single-container stack, hiding sparklines while also hiding the toggle itself. Keying by node+stack ensures a clean remount. Also added test coverage for zero containers and density reset on remount. * fix: remove unused rerender variable from ContainersHealth test |
||
|
Anso
|
b65daf6845 |
feat: add notification suppression rules (#1525)
* feat: add notification suppression rules * fix: restore label routing and routing test mocks for suppression * fix: allow bell mute shortcuts for history-only notification categories Suppression rule validation used the routable category whitelist, which rejected history-only categories such as update_started that appear in the bell during stack updates. * feat: expand Mute Rules UX with compose-first entry points and activity badges * fix: add missing NodeContext mocks for notification suppression tests |
||
|
Anso
|
d6ce60d280 |
fix: make Reduced motion gate overlays, standardize the tab band, and polish fleet/snapshots (#1504)
* fix: address review feedback on motion, fleet band, and snapshots - Reduced motion now also skips the animate-ui overlay open/close animations (dialog, sheet, popover, dropdown-menu) via a shared useReducedTransition that zeroes the transition when reduced motion is active; MotionConfig alone only neutralized transform/layout, leaving the opacity/blur fade. - Fleet tab band: flatten the list's own pill band so the tabs sit in a single full-width band instead of a nested second band. - Fleet Overview: label the node-update button "Node Update"; the add-node button becomes a ChartNetwork icon that opens Settings > Nodes (outline style, matching the node-update button) instead of the add-node modal. - Blueprint deployments empty state: drive the serif headings from the theme heading-style token so Calm drops the italic. - Snapshots: move the per-stack Restore onto the stack header row (right side), matching the ghost action style. * feat: standardize the tab band on Security and add a tab hover state - Apply the Fleet full-width tab band to the Security page (single band, the list's pill background flattened so the tabs sit directly in it). - Add a hover highlight to tabs so the band reads as interactive, not flat; the active tab is unaffected. * fix: drive reduced-motion transitions from the app setting, not the OS query useReducedTransition called framer-motion's useReducedMotion(), which only reflects the OS prefers-reduced-motion media query and ignores our MotionConfig / appearance toggle, so dialogs kept animating with the setting on. Read the app's useReducedMotion selector instead. Verified: with the setting on, the dialog opacity snaps 0->1 in one frame; with it off, it ramps over the spring. * feat: standardize stack-detail body text to text-xs and add a log expand toggle - Bump the anatomy panel body text (rows, field values, warnings) and the structured log lines from 10/11/12px to text-xs (12px), leaving the uppercase kicker labels and the log level/source badges as-is. - Add an expand control next to the log download button that collapses the Command Center so the logs pane fills the left column; toggles back to restore. |
||
|
Anso
|
b5810a9b55 |
feat: add Reduced motion setting and polish chrome, files, and stack-detail (#1501)
A batch of UI/UX polish: - New independent "Reduced motion" appearance setting (separate from Reduced effects). Drives framer-motion via MotionConfig and clamps CSS transitions via data-motion on <html>; toasts are unaffected. Defaults off (OS preference still honored). - Stack-detail Files tab: rename "Files & Volumes" to "Files", add a persisted word-wrap toggle to the file viewer (default on), and add a fullscreen toggle that collapses the Command Center + Logs column so the editor fills the width. - Create Stack > From Git: remove the nested scroll clamp so the deploy toggle and footer are reachable. - Fleet: full-width tab band with icon-only Refresh / Export Dossier, icon-only Check-for-updates / Add-node on the Overview toolbar, theme-aware empty-state headings (calm drops the italic), and fix the Actions card body overlapping the action-row divider. - Snapshots: restyle Restore and Restore all to the ghost button design used by View / Preview / Download, and right-align the per-stack Restore. - Settings sidebar: App Store gradient active style and standard font size. - Compose Doctor: dismiss the high-risk banner (and clear the tab dot) until the findings change, via a shared fingerprint-keyed hook. - Stack-detail Storage: link the "no recent fleet snapshot" warning to the Fleet Snapshots tab (FleetView tabs are now controlled to support the deep link). |
||
|
Anso
|
3bf677af6c |
feat: add syntax highlighting to .env editor tab (#1459)
Apply Monaco built-in ini language mode to the .env editor tab, matching the syntax highlighting already used by the FileViewer, diff previews, and Git source diffs for env content. - EditorView.tsx: change env tab language from plaintext to ini - Add EditorView.test.tsx: 3 cases asserting ini/yaml/files tabs - Docs: update editor.mdx to reflect env tab has highlighting |
||
|
Anso
|
a698aaa926 |
feat: add per-stack project env file selection for Docker Compose (#1457)
* feat: add per-stack project env file selection for Docker Compose
Allow users to configure an ordered list of env files per stack that serve
as the project environment file(s) for Docker Compose ${VAR} interpolation.
The selected files are passed via repeated --env-file flags during all
compose commands.
Backend:
- Add stack_project_env_files table (node-scoped, ordered)
- Extend authoredComposeEnvFileArgs to emit --env-file for configured files
- Add GET/PUT /stacks/:name/project-env-files and /candidates endpoints
- Update resolveStackEnvSources to use configured files as interpolation source
- Update resolveAllEnvFilePaths to merge injection + interpolation sources
- Add discoverStackLocalEnvFiles for candidate discovery
- Extend backupStackFiles and snapshotStackFiles for project env files
- Add project-env-files capability to CapabilityRegistry
Frontend:
- Add project env file selector to EnvironmentPanel (capability-gated)
- Update EditorView banner to generic "project environment file" language
- Add project-env-files capability to capabilities.ts
Issue: #1454
* fix: add realpath validation, clear all stale backup files, reject nested paths
- authoredComposeEnvFileArgs: use fsPromises.realpath + isPathWithinBase
for symlink escape defense at use time
- backupStackFiles: clear ALL non-marker files from backup slot before
writing, not just PROTECTED_STACK_FILES (handles stale old.env)
- PUT project-env-files: reject paths containing / or \ (root-level
only, matching Compose auto-discovery behavior)
* fix: add getStackProjectEnvFiles to compose-service mock
The new authoredComposeEnvFileArgs calls getStackProjectEnvFiles
on the DatabaseService singleton. The compose-service mesh-override
tests mock that singleton without the new method, causing 6 failures.
Add getStackProjectEnvFiles: () => [] (empty = fall back to legacy
behavior, which is what these tests exercise).
* fix: add getStackProjectEnvFiles to remaining service mocks
The new authoredComposeEnvFileArgs calls getStackProjectEnvFiles,
which is missing from the mock in compose-images.test.ts (6 failures)
and image-update-service.test.ts (proactive fix).
* fix: apply inline path-injection barrier at fs sink for CodeQL
The PUT project-env-files route resolved paths via isPathWithinBase
before calling fsp.stat, but CodeQL does not credit a containment check
separated from the sink. Apply the canonical inline barrier pattern
(path.resolve + startsWith at the sink) used throughout the codebase.
* fix: resolve stackDir from the same canonical root as safePath
Prevents a containment bypass when the compose base directory is
a symlink: stackDir was previously joined from the unresolved
baseDir while the inline barrier used path.resolve(baseDir),
which could differ for symlinked paths. Now both stackDir and
safePath are resolved from a single canonical root, then each is
containment-checked against it.
* fix: remove unused isPathWithinBase import
The inline path-injection barrier refactor replaced isPathWithinBase
with an inline startsWith check at the fs sink, so the import is now
unused and fails ESLint no-unused-vars.
|
||
|
Anso
|
b9d8e9f490 |
feat(stacks): browse and edit mounted volume files in the explorer (#1403)
* feat(stacks): browse and edit mounted volume files in the explorer Reposition the stack file explorer around runtime configuration access: discover a stack's declared mounts and expose each as a safe, stack-scoped file root. The explorer opens on a Volumes group (bind mounts and named Docker volumes) by default, with the stack source directory as a secondary group, on a "Files & Volumes" tab. - Discover roots from the rendered effective compose model; resolve named volumes to their Docker name and browse/edit them through the hardened helper container, with bind mounts handled directly when reachable. - Re-derive the allowed roots server-side on every file operation and match the client root id against them, so a request can never address a path the stack did not declare. Block dangerous host mounts and binds that overlap Sencho's managed directories; reject writes to read-only mounts. - Thread an optional root id through the existing file endpoints and an opaque, parseable optimistic-concurrency token through read, conflict, and write, for both filesystem and helper backends. - Keep compose and env file protection on the stack source root only. * fix(stacks): theme the Files & Volumes root switcher Replace the raw native select in the file-root switcher with the design system Select component. The native control did not honour the dark theme, so the panel rendered white with unreadable text. The themed Select gives a dark popover with grouped Volumes / Stack source labels and disabled items. * fix(stacks): contain the bind-root probe and de-taint the file-op error log Gate the volume-root bind probe's realpath/stat behind a compose-base containment check (mirroring the storage host-path probe) so they never run on an unvalidated host path; a source outside the compose dir is unreachable in the containerized deployment anyway and is reported non-accessible without touching the filesystem. Log the helper-backed file-op failure through a constant format string with sanitized arguments instead of an interpolated template literal. * fix(stacks): inline the bind-probe containment guard at the fs sinks The wrapped containment predicate was not recognized as a path barrier, so the bind probe's realpath/stat still flagged as uncontrolled-data-in-path. Inline the path.resolve + startsWith check directly at each filesystem sink (and re-check the resolved canonical before stat, so a within-base symlink that resolves outside the compose dir is also rejected). * fix(stacks): harden file-root lifecycle, upload race, and helper errors Address review findings on the Files & Volumes feature: - Invalidate the file-root allowlist on stack create/delete/import/from-git (wire StackFileRootsService.invalidateNode into invalidateNodeCaches), so a stack deleted and recreated under the same name cannot serve the old stack's roots from the 15s cache. - Use the atomic exclusive write for a non-overwrite upload so a file created by another writer after the existence check is not silently clobbered. - Let the helper's real cd errno through and map permission failures to 403 consistently across list/stat/read/write/mkdir/delete/pathKind, instead of reporting EACCES as 404/500; pathKind no longer reports a permission-denied parent as absent. - Document the realpath-then-open TOCTOU as a known, pre-existing limitation of every file op (O_NOFOLLOW is not viable because config volumes legitimately contain symlinks); the bind root is contained to the compose dir and the op requires stack:edit. - Docs: drop a missing screenshot reference and correct the protected-file delete behavior (stack-root compose/.env cannot be deleted via the explorer). |
||
|
Anso
|
a5109e7916 |
feat(editor): enable mobile compose and env editing (#1371)
* feat(editor): enable mobile compose and env editing The mobile stack-detail Compose segment was read-only and told users to edit on desktop. Operators need to make small emergency edits from a phone, so the Compose segment now opens a full-screen editor for small, safe compose and .env changes. The editor is a lightweight monospace textarea rather than Monaco, sized for small corrections at common phone widths. It reuses the existing desktop save path from useStackActions and the global overlays, so every protection behaves the same: ETag conflict handling, diff preview when enabled, save-only, save-and-deploy, and the unsaved-changes guard. A compose/.env toggle appears when the stack has an env file, and the env-file picker is locked while edits are unsaved so switching files cannot drop them. Editing is gated by the same stack:edit permission as desktop. A footer note reminds users that mobile editing is for small changes and points large rewrites to desktop. The desktop Monaco editor is unchanged. * fix(editor): keep the mobile editor save target in sync with the shown buffer Two edge cases in the mobile compose/.env editor could silently drop an edit: - When the desktop editor was on the Files tab (or an env tab with no env file) and the viewport crossed into the mobile breakpoint, the editor showed the compose buffer while the shared active tab stayed on files, so a save quietly no-opped. Normalize the active tab to compose on the mobile surface so the visible edit always saves to the visible file. - The textarea stayed writable while an env-file switch was loading, so edits typed during the fetch were overwritten when it resolved. Make the textarea read-only while a file load is in flight. Adds unit tests for both normalizations and the read-only-during-load guard. |
||
|
Anso
|
f253276303 |
fix: make published port links open reliably (#1359)
* fix: make published port links open reliably Container published-port links now render as real anchors that open on desktop and mobile, replacing ad hoc window.open calls. A shared service URL builder centralizes host resolution (configured host, remote node API host, or the browser host, with no browser fallback for unreachable remote nodes), protocol selection (HTTPS for port 443), and known app sub-paths (Plex opens its web path). The container port mapping itself is the link, with a Copy URL action beside it. The stack Open App menu and the anatomy panel footer use the same builder, and the menu only offers Open App when a reachable URL can be built. * fix: skip UDP ports and scope known-app paths to the container port Two follow-ups to the published-port links: - The known-app path (Plex web sub-path) was borrowed from the published host port even when the container port was known and unregistered, so a non-Plex service published on host port 32400 wrongly inherited it. The container-port lookup now wins when known; the published-port lookup stays a fallback for the menu and anatomy footer, which only have the host port. - UDP ports could surface as HTTP links. The backend now carries the port protocol through both container-mapping paths and skips UDP when choosing the main web port (extracted as selectMainWebPort), and the container card filters UDP before selecting a port to link. |
||
|
Anso
|
e20f1fe415 |
feat: add an inline deploy-progress style for the stack detail (#1355)
* feat: add an inline deploy-progress style for the stack detail Deploy progress gains a presentation choice under Settings > Appearance > Display: Modal (the default centered overlay) or Inline. In Inline style a compact status band on the stack detail shows the running operation, its elapsed time, the live phase, the latest output line, and the post-update health gate result. A "View output" button opens the full log modal on demand, a dismiss control clears the band, and the band auto-clears a few seconds after a clean completion. The live progress socket is lifted to an always-mounted owner so the band streams without the modal; the default Modal style is unchanged. Operations carry their node so a band never bleeds onto a same-named stack on another node. The stack detail's redundant "CONTAINERS" section heading is removed; the band reserves that vertical space. * fix: keep inline deploy progress reachable off the stack detail Review of the inline presentation found a gap: a failed operation, an App Store install, or navigating away leaves the inline session with no visible surface, since the band only renders on the operation's own stack detail. Restore the minimized pill as the inline fallback, shown only when the band is not covering the session, so there is always a click-through to the log without ever overlapping the band. Closing the modal for a failed op now ends the session (the band has stepped aside) instead of only hiding it. Also document the unsupported mid-operation style switch, and refresh the deploy-progress, settings, appearance, and app-store docs for the renamed "Deploy progress" setting and the Modal/Inline choice. |
||
|
Anso
|
38aabe7064 |
feat: health-gated updates and rollback readiness (#1354)
* feat: classify stack deploy and update failures with suggested next actions Failed deploy and update responses now carry a failure classification (cause category, headline, and suggested next step) derived from the compose error output. The recovery panel and chip render the classification and include it in copied diagnostics, and gateway-style failures surface as a node-unreachable cause. * feat: add update and rollback readiness reports for stacks Before a manual update, Sencho now shows an advisory readiness verdict computed from the stored preflight result, open drift findings, live container health, the pending image change, the rollback backup slot, and node disk headroom. The Stack Dossier gains a rollback readiness section that states what a rollback can restore and explicitly discloses that volume and bind-mounted data are not covered. Toolbar and sidebar updates now share one update path, and admins can create a fleet snapshot from the readiness dialog before updating. Nodes that do not advertise the capability keep the direct update flow. * feat: observe stack health after updates with a post-deploy health gate After a deploy or update succeeds, Sencho now watches the stack for a configurable observation window and records a passed, failed, or unknown verdict: containers must stay running, healthchecks must report healthy, and restart loops or disappearing containers fail the gate. The deploy panel shows the observation live and holds off auto-closing until the verdict lands, a failed gate surfaces the existing recovery actions including rollback, and the stack timeline records update started and gate verdict events. Scheduled, webhook, bulk, and git-source updates are gated the same way; rollbacks and installs are deliberately not. The gate is observational only and can be tuned or disabled per node under host alert settings. * docs: document health-gated updates and rollback readiness New operator page covering the update readiness dialog, the post-update health gate and its settings, the rollback readiness disclosure, and classified failures, with cross-links from the atomic deployments and deploy progress pages. The API reference gains the readiness and health-gate endpoints, the healthGateId success field, and the failure classification schema on deploy and update error responses. * feat: withhold the success verdict while the health gate observes An update used to show a green Succeeded that a failed health gate then contradicted moments later. The deploy modal now reports Verifying health while the gate observes, shows success only when the gate passes, and makes a failed or unknown gate the headline result; success toasts soften to a verifying message while a gate runs. The mobile recovery card groups its actions behind one bottom-right Take action menu so it stays compact on a phone, with the classified cause still visible on the card. A successful image update now also counts as the last known-good marker in rollback readiness, and the docs gain screenshots of the readiness dialog, gate states, dossier section, and settings. * fix: harden log format strings and the env existence path check Log calls that interpolated the stack name into the console format string now use constant format strings with placeholder arguments, and envExists validates path containment inline at its filesystem access, matching the established patterns used elsewhere in the same files. * test: adapt deploy modal success specs to the post-deploy health gate The deploy feedback modal now withholds its success verdict while the health gate observes the new containers, showing "Verifying health" until the gate passes. The two success-path E2E tests waited for "Succeeded" within the gate's 90s default window and timed out. Shorten the observation window to the 15s minimum for these tests via the settings API, assert the verify-then-succeed sequence the modal actually renders, and restore the default window afterward so the test value does not leak into later runs. * fix: serialize health gate polling and harden gate observation Address race conditions in the post-update health gate found in review. Backend: the gate poller used setInterval, so a Docker observe slower than the 5s tick could overlap the next poll and corrupt the restart and missing-container accounting, and a wedged socket could leave a poll pending forever. Polling is now single-flight: each cycle self-schedules the next only after it settles, and the observe is bounded by an 8s timeout so a hung probe counts as a poll error and resolves the gate unknown after three in a row. Frontend: the gate poller could overlap requests, letting a slow earlier "observing" response overwrite an already-applied terminal verdict. It is now single-flight with a terminal latch, so a late response can never roll the UI back from passed or failed. Also reject a non-digit nodeId on the snapshot coverage route instead of letting parseInt coerce it, document that turning off the deploy progress panel opts out of the live gate UI while the gate still runs server-side, and add gate-coverage tests for the webhook, git source, and auto-update apply paths plus the new single-flight, observe-timeout, and recovery cases. |
||
|
Anso
|
d369b03a38 |
feat: detect stalled stack updates and add in-app recovery actions (#1347)
* feat: detect stalled stack updates and add in-app recovery actions Add a backend idle-output backstop that stops a deploy/update compose step that has gone silent (SENCHO_COMPOSE_STALL_TIMEOUT_MS, default 10m), so a hung image pull surfaces a fast failure instead of spinning indefinitely. Surface failed, timed-out, and stalled operations with recovery actions on the stack page: a desktop chip plus popover menu and an inline mobile card offering retry, restart, roll back (when a backup exists), refresh state, and copy diagnostics, all gated by deploy permission. The streaming deploy/update progress modal is now on by default and warns when output goes quiet. Container state is refreshed after a failed or stalled operation, and the UI never sits in an indefinite spinner. * fix: harden rollback against policy-blocked file mutation and refine recovery Address review findings on the stalled-update recovery work: - The rollback route restored backup files before running the policy gate, so a policy-blocked rollback could leave the on-disk config rolled back while the deployed containers were unchanged. Snapshot the current files first and revert them when the gate blocks; if that revert itself fails, escalate it on the persistent alert feed since the 409 is already sent. - Refresh container state after a successful manual rollback (rollback redeploys), without mis-recording a refetch failure as a rollback failure. - Suppress the stalled-output warning once live progress is unavailable. * test: mock snapshotStackFiles in the atomic-deploy rollback route tests The rollback route now snapshots stack files before restoring a backup, so its FileSystemService mock needs snapshotStackFiles. Without it the mocked call threw and the route returned 500, failing the success-path rollback assertions. |
||
|
Anso
|
928a3a8343 |
feat(mobile): bespoke phone layouts for dashboard, fleet, schedules, and settings (#1330)
* feat(mobile): masthead-led dashboard and 5-tab bottom nav on phones On phones (below the md breakpoint) the dashboard now renders a bespoke, masthead-led layout instead of the reflowed desktop workspace: - A status masthead leads with the overall system-health verdict, the node, and a live summary (stack counts, last sync, a "metrics stale" marker when polling stops). - A CPU hero card with a sparkline, then a memory / disk / network strip with threshold-colored bars, then a tappable stack-health list. - The bottom tab bar gains a Home tab (Home / Stacks / Fleet / Sched / Settings); the global top bar is dropped on this screen, with notifications and a "more" menu rehomed into the masthead. The health-verdict logic is extracted into a shared helper so the phone masthead and the desktop health bar read from one source, with unit tests. All changes are scoped below the md breakpoint or rendered only on the mobile shell; desktop layout is unchanged (verified against the desktop snapshot gate). * feat(mobile): bespoke fleet glance and node detail on phones On phones (below the md breakpoint) the Fleet view now renders a bespoke, masthead-led layout instead of the reflowed desktop workspace: - A fleet masthead leads with the overall fleet-health verdict and a running / cpu / mem summary band, then a list of node cards. The local node is marked with a cyan rail and a "you are here" tag; offline nodes are dimmed. - Tapping a node opens a full-screen node detail: state pill, resource bars (cpu / mem / disk), the stacks running on that node, and an Inspect action that switches to the node. Operators with the right permissions also get a Drain (cordon) action. - The screen polls the fleet overview every 30 seconds; the global top bar is dropped here, with notifications and a "more" menu in the masthead. All changes are scoped below the md breakpoint or rendered only on the mobile shell; desktop layout is unchanged. * feat(mobile): bespoke schedules and settings screens on phones On phones (below the md breakpoint) Schedules and Settings now render bespoke, masthead-led layouts instead of the reflowed desktop workspace: - Schedules: a "next up" glance leading with the next run time and countdown, then upcoming runs grouped by day with a per-action status dot and target. It is read-only on mobile; creating and editing schedules stays on desktop. - Settings: a grouped-card list of every reachable section; tapping one opens it full-screen with a back affordance and a section masthead. The section content itself is the same as on desktop. The settings section switch, lazy-loaded section chunks, and tier gating are moved into a shared component so the desktop and mobile screens render the same section content from one place. The global top bar is dropped on both screens, with notifications and a "more" menu in the masthead. All changes are scoped below the md breakpoint or rendered only on the mobile shell; desktop layout is unchanged. * fix(mobile): show notifications and more-menu on the stack detail header The full-screen stack detail on phones drops the global top bar, but its header was missing the notifications bell and the "more" navigation menu that the other mobile screens carry in their masthead, leaving no way to reach notifications or other destinations while viewing a stack. Render the same header-actions cluster in the detail header (and the loading placeholder), next to the back affordance. Desktop is unaffected. |
||
|
Anso
|
e8f271f5f6 |
feat(ui): make the core stack flow usable on mobile (#1327)
* feat(ui): make the core stack flow usable on mobile Below the md breakpoint the app collapses to a single full-width column: the stack list is full-screen, tapping a stack opens a full-screen detail with a Health / Logs / Compose segmented control (Logs first) and a back button, and a bottom tab bar switches Stacks, Fleet, Schedules, and Settings. Compose is read-only on a phone with a prompt to edit on desktop. Desktop (md and up) is unchanged: the mobile shell is gated behind a useIsMobile hook plus max-md/md variants, and the stack-detail blocks are shared with the desktop two-pane view so it renders identically. Also generalizes the unsaved-changes guard so leaving a dirty editor (back, tab bar, hamburger) prompts before discarding; adds 44px touch targets on list rows, filter chips, and actions; makes log and shell modals full-screen on mobile; and offsets toasts and the deploy pill above the bottom tab bar. * fix(ui): keep mobile nav in sync when opening views from outside the bottom bar On a phone the sidebar activity actions, the node switcher's Manage Nodes, the profile Settings entry, and the dashboard configuration links set the active view without flipping the mobile surface to content, so the user stayed on the stack list and never saw the destination. Route these through the mobile-aware navigation and settings helpers (a no-op on desktop). |
||
|
Anso
|
865d792874 |
feat(pricing): collapse to two tiers (#1309)
* feat(pricing): collapse to two tiers (Community + Admiral) Collapse Sencho's pricing from three tiers (Community / Skipper / Admiral) to two: a generous free Community tier and a single paid Admiral tier. The Skipper tier is removed. Now free in Community: auto-heal, auto-update, scheduled operations, webhooks, notification routing, Fleet Actions and bulk operations, SSO preset providers (Google / GitHub / Okta), unlimited users with admin and viewer roles, and deploy safety (atomic deploys, auto-rollback, and one-click rollback). Admiral (paid) is focused on running and governing a fleet: blueprints, Fleet Secrets, deploy enforcement, vulnerability report export, audit log, host console, private registries, mesh networking, node cordon, managed cloud backup, LDAP / Active Directory SSO, and the advanced RBAC roles (deployer, node-admin, auditor) with per-resource scoped assignments. Internally the license variant distinction is removed so tier is binary (community / paid). License validation still verifies the Lemon Squeezy store and product before granting paid status. Docs and the contributor guide are updated to the two-tier model. * docs(pricing): correct licensing page to two-tier pricing and tidy stale tier wording The licensing docs page kept the old Admiral pricing plus a Founder Lifetime column and an Enterprise paragraph after the two-tier collapse. Update it to $12/month or $99/year, drop the lifetime and Enterprise content, and link to the pricing page for current pricing. Also fix stale "Skipper" wording in CLA.md, SUPPORT.md, one test title, and three test comments. Historical CHANGELOG entries and the retired-Skipper license-guard test are intentionally left as-is. * docs: align licensing and SSO pages with the two-tier model Correct the SSO overview so the Google, GitHub, and Okta presets read as available on every tier, matching the provider table; only LDAP and Active Directory require Sencho Admiral. Remove the lifetime-plan references from the licensing, settings, and troubleshooting pages so they reflect subscription-only Admiral pricing. * fix(rbac): omit scoped permissions from /me on the Community tier Scoped role assignments only take effect on the paid tier, but GET /api/permissions/me returned them unconditionally, so a downgraded instance with leftover assignments rendered per-resource affordances the API then rejected with 403. The endpoint now mirrors the permission middleware and includes scoped permissions only on the paid tier. Adds a regression test covering the downgrade case. * docs: use custom-pricing wording on the contact page The two-tier model has no Enterprise tier; reword the contact page's enterprise pricing/deals to custom pricing/deals so it does not imply a tier that no longer exists. |
||
|
Anso
|
2dd0660491 |
fix(stacks): reflect apply progress and clear the anatomy update banner (#1279)
* fix(stacks): reflect apply progress and clear the anatomy update banner The "Update available" banner in the stack Anatomy panel ran its apply in the background but gave no feedback: the apply button stayed idle and the banner never went away once the update finished. Pass an in-flight flag to the panel so the apply button disables and shows progress while the update runs, and re-check the update preview when the apply finishes so the banner clears on success and stays in place when the update did not take effect. * fix(stacks): scope the update re-check to its stack and keep the banner on refresh failure The post-apply re-check of the Anatomy update banner tracked only the in-flight flag, so switching stacks while the first was still updating looked like a completion for the newly selected stack and triggered a stray preview request that could clear that stack's valid banner. Track the stack name alongside the flag and only re-check when the completion belongs to the stack on screen. Also keep the banner when the re-check itself fails (non-OK response or network error) instead of clearing it, so a transient read failure can no longer hide an update that may still be pending. Both failure paths now log for diagnosis. |
||
|
Anso
|
4c28b37a59 |
fix(stacks): require stack:read on file explorer GET routes (#1200)
The four file-explorer GET endpoints (list, content, download, permissions) previously relied on auth alone. Their write-side siblings required stack:edit, so the read path was the only file-explorer surface without an explicit capability check. The shipped roles all carry stack:read globally so behaviour is unchanged today, but adding the guard prevents a future role definition from silently inheriting unrestricted file reads, and it brings the file-explorer reads in line with gitSources and stackActivity which already gate on stack:read. The frontend Files tab trigger, panel, and the anatomy-panel "Open Files" affordance now render only when the user holds stack:read for the active stack. An effect canonicalises activeTab back to 'compose' if the user lands on 'files' without permission, so a denied user cannot end up staring at an empty panel. |
||
|
Anso
|
7c84969b31 |
fix(editor): harden save-deploy, node-switch, delete, and stats reactivity (#1188)
* fix(stacks): validate input, bound YAML parses, and reorder delete steps
Backend hardening covering three editor-served routes:
- `/:stackName/containers` GET adds an explicit `isValidStackName` guard so
bad input is rejected at the call site even if the router-level param
validator changes in future.
- `MAX_COMPOSE_PARSE_BYTES` (1 MiB) bounds the two `YAML.parse` callsites
(`resolveAllEnvFilePaths`, `/services`) so a malformed or oversize compose
cannot exhaust heap during routine env/service lookups.
- `DELETE /:stackName` is reordered to abort before any database cleanup
if `FileSystemService.deleteStack` throws, keeping DB and FS in sync.
Partial-failure responses now describe the resulting state in human
terms instead of returning a generic 500.
Adds debug-mode entry-point traces (`[Stacks:debug] ...`) on save / down /
restart / delete handlers, all sanitised through `sanitizeForLog`. New
vitest covers the containers validator, the YAML size guard, and the
small-compose happy path.
* fix(editor): gate save-and-deploy on save success, abort stale loads
`saveFile` now returns a boolean: true on a successful PUT, false on any
failure. `handleSaveAndDeploy` short-circuits when save fails so a backend
500 on the compose write no longer slips through to a deploy with the
unsaved in-memory content. The diff-preview confirm path in ShellOverlays
applies the same guard.
`loadFile` now drives a per-hook `AbortController`. A stack switch, a
node switch (via `resetEditorState`), or hook unmount aborts the in-flight
GET chain so a late compose / env / containers / backup response from the
previous selection never overwrites freshly-loaded state.
`hasUnsavedChanges` is exported so EditorLayout can check it during the
node-switch lifecycle. New unit tests cover the boolean save contract and
the save-fail-blocks-deploy invariant.
* fix(editor): prompt on node switch when the editor has unsaved changes
Switching the active node previously called `resetEditorState()` without
checking the editor's dirty state, silently dropping in-progress edits.
The post-auth shell now intercepts the node-change effect: if the editor
is dirty, the attempted node is stashed via the existing
`pendingUnsavedNode` field, `pendingUnsavedLoad` is set to a sentinel
that routes `discardAndLoadPending` to `setActiveNode`, and `activeNode`
is reverted to the previous node so the dialog can be resolved without
losing content.
A re-entrant switch (clicking a third node while the dialog is still
open) is now ignored — the second switch reverts silently so the
dialog's anchor stays on the first attempt. When the previous node is no
longer in the registry and cannot be reverted to, the operator gets a
warning toast before the wipe so the loss is at least visible.
* fix(editor): split delete and deploy permission gates in the action bar
The action bar previously wrapped every affordance — including the Delete
menu item — in a single `can('stack:deploy')` check, even though the
backend route requires `stack:delete`. A user with `stack:deploy` only
saw a Delete button that 403'd, and a user with `stack:delete` only saw
no menu at all.
Each affordance now renders against its own permission: deploy / stop /
restart / update on `stack:deploy`, delete on `stack:delete`, rollback on
`canDeploy + isPaid + backupInfo.exists`, scan on `isAdmin +
trivy.available`. The overflow menu appears if any of {rollback, scan,
delete} is granted, so a delete-only operator still has a way to remove
the stack.
Adds a Monaco model dispose on EditorView unmount via the existing
editor ref, and a compact `Stats unavailable` chip in the CONTAINERS
header that lights up when the live-stats WebSocket reports a persistent
failure.
* fix(editor): make container-stats hook reactive to the active node
`useContainerStats` previously read the active node id from
`localStorage` on each WebSocket open, with a deps array of `[containers]`
only. After a node switch the stats stream stayed pointed at the
previous node's `/ws` endpoint until the containers array refreshed.
The hook now accepts `activeNodeId` as a second argument, depends on
`[containers, activeNodeId]`, and drops the localStorage read. The
return shape is `{ stats, error }`: the error field carries a string
when the stream fails, surfaced by EditorView as a small chip in the
CONTAINERS header. A per-WS `warnedOnce` set ensures a flaky daemon
emits at most one console.warn per stream lifetime, never at message
rate. Close codes 1000 / 1001 stay silent (normal teardown, navigation).
The error reset (`setError(null)`) is split into its own effect keyed on
`activeNodeId` so the banner does not flap on every containers-array
refresh tick against a persistently-flaky daemon. Tests cover the new
shape, the node-id reactivity, and the abnormal-close warn behaviour.
* docs(editor): describe new gate split and add troubleshooting entries
Updates the editor cockpit page to reflect that the action bar now
gates each affordance on its own permission (deploy / delete), and that
the bar appears for delete-only users so a stack can still be removed.
Adds three troubleshooting accordions covering the new behaviours: a
failed save that blocks the subsequent deploy, the unsaved-changes
prompt on node switch, and the live-stats chip when the daemon is
unreachable.
Adds an E2E spec verifying that a forced PUT 500 on the compose write
surfaces the failure toast and prevents the deploy POST from firing.
* fix(stacks): use printf-style format for compose-down warn
`console.warn` treats arg-1 as a printf format string when subsequent
args follow. The template literal here interpolated a sanitized but
not %-escaped stackName into arg-1 alongside an error argument, so a
stackName containing a `%s` placeholder could theoretically swallow
the error in the substitution. Switch to the file's established
`'... %s ...', value, err` pattern.
* test(editor): fix save-deploy spec; click both edit buttons, drop Monaco fill
The editor has two edit affordances: a lowercase 'edit' in the Anatomy
panel header that swaps the right column to the editor tabs, and a
capital 'Edit' in the editor toolbar that flips Monaco from read-only
into edit mode. The spec previously matched both with a case-insensitive
regex and only fired one click, so Monaco never entered edit mode.
It also tried to fill .monaco-editor textarea — that element is Monaco's
IME accessibility helper, hard-coded readonly; the real editable surface
is a contenteditable div.
`saveFile()` does not gate on a dirty buffer, so the spec does not need
to modify Monaco at all. Click both edit buttons with case-anchored
regexes and drop the fill step.
* test(editor): disambiguate Save & Deploy locator from sidebar row
The TEST_STACK fixture is named 'e2e-save-deploy-stack'. The sidebar
renders each stack into a div with role=button whose accessible name
includes the stack slug, so the regex /save.*deploy/i matches both the
sidebar row ('e2e-save-deploy-stack') and the editor toolbar's actual
Save & Deploy button — strict-mode bails. Anchor the locator to the
literal button text with exact:true.
|
||
|
Anso
|
3a839b781b |
fix(stack-editor): reset tab to compose.yaml when clicking edit (#1107)
The Edit affordance on the stack anatomy panel previously only flipped the editor visibility flag and left activeTab whatever it was. After a user clicked Files (which set activeTab to 'files'), closed the editor, then clicked Edit, the editor reopened still on the Files tab instead of showing the compose.yaml editor. Make onEditCompose mirror the sibling onOpenFiles handler by also setting activeTab to 'compose', so the Edit button always lands on the compose editor regardless of which tab was last viewed. |
||
|
Anso
|
6354cb3387 |
fix(security-ui): expose Community-tier scan surfaces per PR #930 (#1070)
PR #930 opened the backend security routes to Community admin but left several frontend isPaid gates in place, so the matching UI surfaces stayed hidden from Community even though the API would accept the request. This brings the UI in line with the backend matrix. Flipped: - ResourcesView Scan history button (was trivy.available && isPaid) - ResourcesView Full scan (vulnerabilities + secrets) menu item - ResourcesView VulnerabilityScanSheet canCompare - ResourcesView VulnerabilityScanSheet canManageSuppressions (now isAdmin) - EditorView stack-level Scan config button (canScan) - SecurityHistoryView primaryAction (Compare) - SecurityHistoryView VulnerabilityScanSheet canManageSuppressions Unchanged on purpose (still paid, matching backend gates): - canGenerateSbom (SBOM endpoint requirePaid) - SARIF download in the drawer overflow - Scan Policies block in Settings - Trivy auto-update toggle (requireAdmiral) Test: inverted the SecurityHistoryView.test.tsx assertion that locked in the now-incorrect "hides Compare on Community" behavior. |
||
|
Anso
|
1cf996142b |
refactor(frontend): EditorLayout final shell (B4-7) (#906)
* refactor(frontend): extract useOverlayState hook from EditorLayout * refactor(frontend): extract useStackActions hook and wire useOverlayState into EditorLayout * refactor(frontend): fix quality issues in useStackActions post-review * fix(frontend): fix interval leak, RunResult contract, yml hardcode, and loadFile length in useStackActions * refactor(frontend): extract useSidebarContextMenu hook from EditorLayout * refactor(frontend): extract ShellOverlays component from EditorLayout * refactor(frontend): relocate Monaco layout effect and log-viewer event listener out of EditorLayout The Monaco tab-switch layout effect is now self-contained in EditorView, alongside its monacoEditorRef. The SENCHO_OPEN_LOGS_EVENT listener moves into useOverlayState, where openLogViewer lives. EditorLayout is left with the two coordination effects that depend on cross-hook state. |
||
|
Anso
|
ae3cc3f0fd |
refactor(frontend): extract EditorView from EditorLayout (#899)
Move the inline renderEditor JSX (~535 lines) out of EditorLayout.tsx into a new EditorView component under components/EditorLayout/, matching the pattern established by ViewRouter (B4-1) and CreateStackDialog (B4-2). State ownership stays in EditorLayout for this PR; the next step lifts state slices into a useEditorViewState hook. The new file owns the compose-editor surface as a unit: command-center identity card, action bar (Restart/Stop/Update + overflow with Rollback, Scan config, Delete), per-container health strip with sparklines and service action menus, the Logs section with Structured / Raw toggle, and the right-column Monaco editor (when editingCompose) or StackAnatomyPanel (default). Three module-level helpers (extractUptime, healthcheckLabel, getStackStatePill) and the ContainerInfo / StackAction types move with it; EditorLayout re-imports the types so existing local consumers compile unchanged. One small consolidation done in this PR: the trash-can onClick used to call setStackToDelete(selectedFile) followed by setDeleteDialogOpen(true). Those are wrapped into a single requestDeleteStack callback owned by EditorLayout, exposed as one prop on EditorView. The sidebar context-menu remove path remains unchanged (it passes its own stackName to the setters). EditorLayout.tsx: 2,747 -> 2,169 LOC (-578). Also drops ~25 imports that were only consumed by the relocated block (Editor, Card*, DropdownMenu*, Select*, Tabs*, Sparkline, StackAnatomyPanel, StackFileExplorer, StructuredLogViewer, TerminalComponent, ErrorBoundary, copyToClipboard, cn, springs, and 18 lucide icons). EditorView.tsx: 822 LOC. Above the per-child < 500 target; further sub-decomposition (CommandCenterCard, ContainerHealthStrip, etc.) is a later step in the tracker, not this PR. |