4 Commits

Author	SHA1	Message	Date
Anso	f5178889eb	feat(recovery): complete authored-project atomic rollback generations (#1819) ... * feat(recovery): capture complete authored Compose project for atomic rollback Replace the root-compose-only backup slot with staged recovery generations that record the managed inventory, exact Compose invocation, and prior image identity, and wire the same engine through deploy, update, manual rollback, and Git apply. * fix(recovery): satisfy CodeQL path barriers and update-guard mock Inline resolve+startsWith checks at generation/inventory fs sinks and stub getCurrentStackUpdateRecovery in UpdateGuardService tests. * fix(recovery): drop unused FileSystemService import in generation store test * fix(recovery): harden authored-project rollback for upgrade and restore safety Preserve legacy UUID backup rows, restore Git deploy state with files, make multi-file restore recoverable, evaluate policy on the restored target, and fail closed when Git capture cannot cover an apply. * fix(recovery): unblock Git apply unit tests and CodeQL pre-restore TOCTOU Mock recovery capture in git-source-service tests after fail-closed apply capture, and re-resolve live paths immediately before pre-restore snapshot reads. * fix(recovery): fall back to authored inventory when Git manifesto is missing First Git apply captures before promote, so a missing managed-project manifesto must not block rollback capture when the live stack already has authored files. * fix(recovery): make authored-project rollback atomic across Git state Restore the managed-project manifesto with files, keep nullable Git identity on first-apply captures, persist Git side-state in restore intents for startup reconcile, compensate legacy materialize failures, and refuse directory collisions before mutation. * fix(recovery): satisfy CodeQL path and TOCTOU barriers on manifesto restore Add inline resolve barriers for manifesto read/clear sinks and remove the access-then-read race when restoring a generation manifesto snapshot. * fix(recovery): close third-audit rollback generation blockers Fail closed on incomplete Git inventory fallbacks, execute captured Compose invocation during recovery, refuse startup and mutations while restore intents remain unresolved, propagate legacy stale-delete failures, and add Docker-level exact prior-image coverage plus regression tests. * fix(recovery): mark acquired before handoff in prior-image Docker test Match the production updateStack CAS sequence so the exact prior-image integration test does not fail handoff from the captured phase. * fix(recovery): close fourth-audit rollback safety blockers Evaluate policy against held images, use index-based pre-restore snapshots, hold the shared stack lock across Git apply, replay Mesh and empty captured invocations exactly, restore POSIX modes with fail-closed sensitive permissions, keep case-sensitive paths, and link Git auto-deploy health gates. Add regression coverage for these cases. * test(recovery): fix mocks for health-gate link and authored compose args Add linkGateOrRetain to the Git apply recovery mock, and mock authoredComposeArgs so the case-collision inventory test is not masked by a missing getComposeDir stub. * fix(recovery): close fifth-audit rollback safety blockers Share git_apply locking for webhook auto-apply, fail closed on malformed recovery service records, refuse mixed-image capture, and require exact probe counts with hold-tag eligibility checks. * fix(recovery): close sixth-audit rollback safety blockers Preserve the legacy backup slot during generation capture, encrypt sensitive pre-restore snapshots, revert files on a failed health probe without committing Git, fail closed when an absent-file revert would delete a directory, skip Compose one-offs, route manual and scheduled backup through the current generation, and persist runtime image platform identity. * fix(recovery): close seventh-audit rollback safety blockers Fleet snapshot restore and restore-all now capture a recovery generation under the stack lock before any authored file write, including on remote nodes. * fix(recovery): keep pre-deploy generations during health-gate observe Link deploy recovery generations to the observing gate so backup cannot replace them mid-observe. Distinguish missing hold tags from probe failures, refuse generation release when services metadata is corrupt, classify mixed-replica and coverage refusals, and toast the backend rollback message. * fix(recovery): wrap webhook deploy case for eslint const bindings in an unbraced switch case trip no-case-declarations. Match the pull case block.	2026-08-13 03:48:09 -04:00
Anso	3f1f15a6f4	fix: keep running containers until stack pull/build succeeds (#1657) ... * fix: keep running containers until stack pull/build succeeds Acquire images before reconcile, capture a recovery generation for compensation, and only remove classified orphans after handoff. * fix: address recovery audit blockers for safe stack updates Retire abandoned and expired recovery artifacts, probe compensated runtimes before reporting rollback success, preserve local Docker when deleting a node, validate the exact Compose invocation before capture, and repair updateStack return-contract fixtures. * fix: resolve ESLint errors blocking CI on this branch Unused-import and unused-variable errors left over from the stack deletion refactor: MeshService in stacks.ts (its opt-out cascade moved into DeployedStackDeletionService), a redundant pruneVolumes destructure in deleteDeployedStack (the real one is re-derived from the same input object inside runDeletionBody), and an unused beforeAll import in a Docker-integration test stub. Also scopes the webhook pull-action case body in a block to satisfy no-case-declarations; purely syntactic, no behavior change. * fix: harden recovery probe, cleanup retry, and failed-pull Docker test Reject absent or unhealthy expected replicas before reporting rollback success, keep cleanup records until artifacts are actually removed, fail closed when a mesh override cannot be generated, and assert a real failed pull leaves the original container running. * fix: verify recovery probe image identity and stack-scoped override paths Reject recovered runtimes that use the wrong image or leave scale-zero services running, and confine tombstone override deletion to the intent stack directory so forged cross-stack paths cannot be swept. * test: batch notification cap fixtures in a SQLite transaction Unbatched 1200-row inserts were timing out at the default 30s under CI load even though the same assertions pass in under 2s when green.	2026-07-21 12:18:01 -04:00
Anso	5f1baa7522	fix: harden deploy/update concurrency and node-targeting safety (#1390) ... * fix: harden deploy/update concurrency and node-targeting safety Release stabilization for deploy/update operational safety. Per-stack operation locking is now global. Background lifecycle paths (scheduler auto stop/down/start/backup/update, webhook execute, Git source auto-deploy, image auto-update, label bulk actions, fleet snapshot redeploy, and mesh redeploy) acquire the per-node, per-stack lock through a new StackOpLockService.runExclusive helper and skip rather than race a manual deploy/update/rollback/backup on the same stack and node. Skips surface honestly (a failed scheduled run, a recorded webhook failure, a per-stack batch result, or a thrown error) instead of a silent no-op. Update readiness and policy-bypass now run against the node captured when the dialog opened, not the live active node, so switching nodes while a dialog is open cannot retarget the update or the bypass retry. Rollback readiness no longer presents a moving-tag or unpinned image as a ready image revert. Restoring files does not revert a moving tag, so those stacks read as partial, and the rollback success message states that the compose and env files were restored. * fix: lock blueprint reconcile against manual ops and correct rollback wording Follow-up to the deploy/update safety hardening, closing two more gaps from a verification pass. BlueprintService.deployLocal and withdrawLocal called ComposeService directly, so blueprint reconciliation could race a manual deploy/update/rollback/backup on an owned stack. Both now run their compose lifecycle call through StackOpLockService.runExclusive and skip (recorded as a failed reconcile, retried on the next cycle) on conflict. The withdraw holds the lock across both the compose down and the directory delete so neither races a manual operation. The runtime rollback messages overstated recovery: a rollback restores the compose and env files and recreates containers, but does not revert an image behind a moving tag. The auto-rollback deploy-progress output, the recovery panel and chip, the failure toasts, and the manual rollback route message now state that the compose and env files were restored, with the matching OpenAPI example and atomic-deployments doc updated. * fix: acquire stack lock before blueprint deploy mutates compose and marker files Local blueprint deploy wrote the compose and marker files and ran the policy assert before acquiring the per-stack lock; the lock only wrapped the deploy itself. A reconcile could therefore rewrite an owned stack's files while a manual deploy/update/rollback/backup was running. The lock now wraps the whole critical section (create, write compose, write marker, policy assert, deploy), so on conflict nothing is written and the reconcile records a failed outcome. Adds a test asserting a deploy under a held lock records failed, writes no marker file, and leaves the manual lock untouched. * fix: make remote blueprint apply atomic under the receiving node's stack lock Remote blueprint deploy wrote the compose and marker files to the target node via separate HTTP calls and only locked on the final deploy, so the file writes could race a manual operation on that node. A node's operation lock is process-local and cannot be held by the hub across HTTP calls, so the locked create/write/deploy now runs on the receiving node. The locked critical section is extracted into BlueprintService.applyLocalUnderLock and exposed via POST /api/blueprints/apply-local. The hub posts the blueprint to that endpoint in one call; the receiving node runs create + write compose+marker + deploy under its own per-stack lock. Older nodes without the route answer 404 and fall back to the legacy multi-call flow. The endpoint is gated by paid tier and the same per-stack stack:edit and stack:deploy permissions as the PUT-compose + deploy it bundles, validates the stack name, compose size, and marker structure, and returns 409 on a lock conflict without writing anything. Adds tests for the atomic single-call path, the 404 legacy fallback, the 409 lock-conflict mapping, the route validation and permission paths, and the write-compose-then-marker-then-deploy ordering of the shared locked apply. * fix(deps): bump undici to 7.28.0 to clear high-severity advisory The frontend CI npm audit gate (--audit-level=high) failed on a transitive undici 7.25.0 (a dev-only dependency via jsdom): TLS certificate validation bypass (GHSA-vmh5-mc38-953g) and cross-user cache information disclosure (GHSA-pr7r-676h-xcf6). Bumping undici within jsdom's existing ^7.25.0 range to 7.28.0 clears the high-severity advisory and unblocks the frontend job. Lockfile only; no direct dependency or source change.	2026-06-18 13:38:19 -04:00
Anso	38aabe7064	feat: health-gated updates and rollback readiness (#1354) ... * feat: classify stack deploy and update failures with suggested next actions Failed deploy and update responses now carry a failure classification (cause category, headline, and suggested next step) derived from the compose error output. The recovery panel and chip render the classification and include it in copied diagnostics, and gateway-style failures surface as a node-unreachable cause. * feat: add update and rollback readiness reports for stacks Before a manual update, Sencho now shows an advisory readiness verdict computed from the stored preflight result, open drift findings, live container health, the pending image change, the rollback backup slot, and node disk headroom. The Stack Dossier gains a rollback readiness section that states what a rollback can restore and explicitly discloses that volume and bind-mounted data are not covered. Toolbar and sidebar updates now share one update path, and admins can create a fleet snapshot from the readiness dialog before updating. Nodes that do not advertise the capability keep the direct update flow. * feat: observe stack health after updates with a post-deploy health gate After a deploy or update succeeds, Sencho now watches the stack for a configurable observation window and records a passed, failed, or unknown verdict: containers must stay running, healthchecks must report healthy, and restart loops or disappearing containers fail the gate. The deploy panel shows the observation live and holds off auto-closing until the verdict lands, a failed gate surfaces the existing recovery actions including rollback, and the stack timeline records update started and gate verdict events. Scheduled, webhook, bulk, and git-source updates are gated the same way; rollbacks and installs are deliberately not. The gate is observational only and can be tuned or disabled per node under host alert settings. * docs: document health-gated updates and rollback readiness New operator page covering the update readiness dialog, the post-update health gate and its settings, the rollback readiness disclosure, and classified failures, with cross-links from the atomic deployments and deploy progress pages. The API reference gains the readiness and health-gate endpoints, the healthGateId success field, and the failure classification schema on deploy and update error responses. * feat: withhold the success verdict while the health gate observes An update used to show a green Succeeded that a failed health gate then contradicted moments later. The deploy modal now reports Verifying health while the gate observes, shows success only when the gate passes, and makes a failed or unknown gate the headline result; success toasts soften to a verifying message while a gate runs. The mobile recovery card groups its actions behind one bottom-right Take action menu so it stays compact on a phone, with the classified cause still visible on the card. A successful image update now also counts as the last known-good marker in rollback readiness, and the docs gain screenshots of the readiness dialog, gate states, dossier section, and settings. * fix: harden log format strings and the env existence path check Log calls that interpolated the stack name into the console format string now use constant format strings with placeholder arguments, and envExists validates path containment inline at its filesystem access, matching the established patterns used elsewhere in the same files. * test: adapt deploy modal success specs to the post-deploy health gate The deploy feedback modal now withholds its success verdict while the health gate observes the new containers, showing "Verifying health" until the gate passes. The two success-path E2E tests waited for "Succeeded" within the gate's 90s default window and timed out. Shorten the observation window to the 15s minimum for these tests via the settings API, assert the verify-then-succeed sequence the modal actually renders, and restore the default window afterward so the test value does not leak into later runs. * fix: serialize health gate polling and harden gate observation Address race conditions in the post-update health gate found in review. Backend: the gate poller used setInterval, so a Docker observe slower than the 5s tick could overlap the next poll and corrupt the restart and missing-container accounting, and a wedged socket could leave a poll pending forever. Polling is now single-flight: each cycle self-schedules the next only after it settles, and the observe is bounded by an 8s timeout so a hung probe counts as a poll error and resolves the gate unknown after three in a row. Frontend: the gate poller could overlap requests, letting a slow earlier "observing" response overwrite an already-applied terminal verdict. It is now single-flight with a terminal latch, so a late response can never roll the UI back from passed or failed. Also reject a non-digit nodeId on the snapshot coverage route instead of letting parseInt coerce it, document that turning off the deploy progress panel opts out of the live gate UI while the gate still runs server-side, and add gate-coverage tests for the webhook, git source, and auto-update apply paths plus the new single-flight, observe-timeout, and recovery cases.	2026-06-11 00:26:26 -04:00