* feat(auth): add TOTP two-factor authentication with backup codes
Adds RFC 6238 time-based one-time password support to every tier,
integrated with the existing password and SSO login paths.
Backend:
- New MfaService wrapping otplib with a plus or minus 1 step tolerance,
base32 secret generation, and hashed single-use backup codes (bcrypt).
- user_mfa and mfa_used_tokens tables in DatabaseService. The second
table is a DB-backed replay blacklist, purged on a 60s interval.
- authMiddleware now recognizes an mfa_pending scope. A token carrying
that scope is rejected on every route except the MFA challenge and
logout, so no API surface is reachable before the second factor
clears.
- /api/auth/login issues only a short-lived mfa_pending cookie when the
user has MFA enrolled. /api/auth/login/mfa consumes that cookie,
verifies the code (or backup code), and swaps in a real session.
- /api/auth/mfa/* routes for status, enrol/start, enrol/confirm,
disable, backup-code regenerate, and SSO-bypass opt-in.
- Admin recovery path: POST /api/users/:id/mfa/reset clears the target's
MFA state, bumps token_version, and writes an audit log entry.
- CLI emergency fallback: backend/src/cli/resetMfa.ts is wired via
`npm run reset-mfa <username>` and also exported for tests.
- SSO flows (LDAP and OIDC) gate on user_mfa.sso_enforce_mfa before
issuing a session; default behaviour keeps the SSO path frictionless.
- Per-user lockout after 5 consecutive failed codes (15 min).
Frontend:
- AppStatus gains an mfa-challenge branch driven by /api/auth/status.
- New MfaChallenge screen, MfaEnrollDialog (QR plus manual secret plus
backup codes), MfaDisableDialog, MfaBackupCodesDialog.
- Account section shows a Two-factor authentication card with enrol,
regenerate, disable, and the SSO-enforce toggle (shown only when SSO
providers are configured).
- Users section gains a Reset 2FA action for admins.
Docs:
- New user guide at features/two-factor-authentication.mdx.
- New admin guide at operations/two-factor-admin.mdx.
- SSO page cross-links to the 2FA doc.
* fix(mfa): drop unused TEST_PASSWORD import and stale eslint disable
* fix(mfa): simplify e2e openAccountSettings helper to match working pattern
* fix(mfa): make e2e suite self-contained and always clean up
Test #2 called loginAs() before the MFA challenge step, which waited for
the dashboard indicator that never appears once the previous test enrolled
the user. That timeout skipped the rest of the serial block, including
the disable step, leaving MFA enabled and breaking every later spec.
Two fixes:
- Tests #2 and #3 now navigate directly to the login page instead of
piggybacking on loginAs, which only handles the password-only path.
- A new afterAll hook unconditionally disables MFA via the API using two
unused backup codes, so the DB is reset even if a test fails midway.
* fix(e2e): use backup code for mfa recovery to avoid totp replay race
The final recovery step in the backup-code replay test previously
generated a fresh TOTP to sign back in. When the timing landed inside
the same 30-second window that test #2 consumed, the server's replay
blacklist correctly rejected it, producing a ~50% flake rate. Backup
codes are single-use and sidestep the replay window, so the recovery
becomes deterministic.
* fix(e2e): drive mfa disable test through the challenge screen
Test #4 called loginAs after test #3 left MFA enabled, but loginAs
waits for the dashboard indicator and does not handle the challenge
screen, so it timed out. Drive the login manually, satisfy the
challenge with a backup code, and use a backup code for the disable
step too to avoid any TOTP replay-window race against earlier tests
in the serial block.
* feat(git-sources): link stacks to Git repositories with diff-and-apply workflow
Add Git Sources so any stack can point at an HTTPS Git repository, branch, and
compose file path. Pulls fetch + validate the incoming commit, store a
diffable pending snapshot, and apply writes only after explicit confirmation
(or automatically, per the configured apply mode). Sibling .env sync is
optional. Works on the Community tier.
Apply modes:
- Review only: mark pending, wait for manual apply in the diff dialog
- Auto-write: write compose + env to disk, do not redeploy
- Auto-deploy: write files and run docker compose up -d
Webhook integration: webhooks can target the new "git-pull" action to trigger
a sync from CI. Per-source debounce prevents runaway pipelines from hammering
the repository host. Tokens are encrypted at rest and never returned to the
frontend.
Docs and tests included. Screenshots and Playwright E2E flows to follow.
* fix(git-sources): drop unnecessary useMemo on commit sha slice
React Compiler's lint rule rejected the manual dependency list because the
inferred dep ('pull') was less specific than the written one ('pull?.commitSha').
The computation is a cheap 7-char slice, so drop the useMemo entirely rather
than fight the rule.
* test(git-sources): add Playwright E2E flows and drop orphan source rows on stack delete
- E2E coverage: non-HTTPS URL rejected client-side, unreachable repo surfaces
a toast error on save, and configure+remove walks the AlertDialog confirm path.
- Deleting a stack now also drops its linked Git source row so a future stack
with the same name starts clean rather than inheriting a stale config.
Replaces five ad-hoc in-process caches (project name map, templates, latest
version, fleet update status, remote node meta) with a single internal
CacheService that provides TTL, inflight-promise deduplication to protect
against thundering herd, stale-on-error fallback, and per-namespace
hit/miss/stale/size counters for observability.
Wraps the hot-path dashboard endpoints in the cache with write-path
invalidation: /api/stats (2s), /api/system/stats (3s), and
/api/stacks/statuses (3s). Keys are namespaced by nodeId so switching nodes
never serves another node's data. Every route that mutates container or
stack state calls invalidateNodeCaches(nodeId), which also drops the global
project-name-map, so user actions stay instantly reflected in the UI.
For /api/system/stats the cheap per-request network rx/tx block is kept
outside the cache so live-updating charts stay smooth while the expensive
systeminformation.currentLoad() CPU sample (~200ms) is reused across the
TTL.
Adds admin-only GET /api/system/cache-stats returning per-namespace
counters for operators who want to observe cache effectiveness.
Enables the compression middleware site-wide for JSON responses. Large
payloads like /api/templates shrink roughly 5x on the wire. SSE endpoints
are explicitly excluded via a Content-Type filter so live log tails and
metric streams are not buffered.
Bumps vitest hookTimeout to match testTimeout (15s) so parallel fork
workers do not hit the default 10s hook limit under CPU contention.
Adds 35 new tests (26 unit for CacheService, 9 integration for cached
endpoints) covering TTL expiry, inflight dedup, stale-on-error,
namespace invalidation, entry-cap safety guard, and write-path
invalidation end-to-end through Express routes.
* fix(api): add tiered rate limiting to prevent polling lockouts
Replace the single global rate limiter (100 req/min/IP) with a tiered
system that separates high-frequency polling endpoints from standard
API traffic:
- Polling tier (300/min): /stats, /system/stats, /stacks/statuses,
/metrics/historical, /health, /meta, /auth/status, /auth/sso/providers,
/license. Exempt from the global limiter but governed by their own
safety net to prevent resource exhaustion.
- Standard tier (200/min): All other endpoints, raised from 100.
- Webhook tier (500/min): POST /webhooks/:id/trigger, dedicated limiter
for CI/CD platforms sharing datacenter IPs.
- Auth tier: Unchanged (5-10 attempts / 15 min).
Enterprise adaptations:
- Authenticated requests keyed by user session (JWT sub/username) instead
of IP, preventing shared NAT/VPN environments from pooling budgets.
- Internal node-to-node traffic (node_proxy tokens) bypasses all rate
limiters entirely.
Includes comprehensive stress tests (21 cases) validating tier
separation, node proxy bypass, and per-user keying.
* chore(deps): bump axios to 1.15.0 to fix SSRF vulnerability
Addresses GHSA-3p68-rc4w-qgx5 (NO_PROXY hostname normalization bypass).
* fix(fleet): resolve stuck update states and improve update UX
The fleet node update flow had several bugs: the in-memory update tracker
never cleared terminal states (timeout, failed, completed), leaving nodes
permanently stuck with no way to retry or dismiss. The Recheck button
only re-fetched stale state without clearing it, and the POST trigger
rejected retries with 409 even after timeout.
Backend fixes:
- Add DELETE endpoints (single node + batch) to clear tracker entries
- Fix 409 race: detect expired timeouts and clear terminal states before
re-triggering
- Populate error messages in the tracker for timeouts and failures
- Include error field in the update-status API response
- Auto-expire completed entries after 60 seconds
Frontend fixes:
- Add retry (RotateCcw) and dismiss (X) buttons on failed/timed-out badges
- Show error details via animated cursor hover (CursorFollow pattern)
- Recheck button now batch-clears all terminal states before fetching
- Recheck shows loading spinner and disables while checking
- Extract NodeCardProps interface for readability
* fix(fleet): detect update completion via process start time
Remote nodes that cannot report their version (e.g. older builds)
caused updates to always time out because completion detection
relied solely on version comparison. The gateway now tracks the
remote node's process start time from /api/meta and detects
container restarts by comparing it across polls.
Also extracts a createTracker() factory to eliminate repeated
object construction across 5 call sites.
* docs: add troubleshooting for first-update timeout on old nodes
Adds a new troubleshooting entry explaining why the first remote
update on nodes running pre-v0.40.0 always times out (neither
version nor process start time can be detected). Documents the
fix: dismiss, recheck, and confirm the node updated.
Also adds a screenshot of the timed-out state with retry/dismiss
buttons to the remote updates feature page.
* fix(fleet): detect update completion via offline detection and error reporting
The update completion detection relied on version change and process
start time, both of which fail on nodes running older Sencho versions
that report "unknown" and lack the startedAt field. This caused every
update to time out after 5 minutes.
Add three-signal detection: version change, process restart (startedAt),
and offline/online detection (node went unreachable during update and
came back). Also add a 90-second early failure heuristic for when the
remote image pull fails silently, and surface pull errors from
SelfUpdateService via /api/meta so the gateway can report them
immediately.
* fix(deps): bump vite to 8.0.5 to resolve high severity vulnerabilities
Fixes GHSA-4w7w-66w2-5vf9, GHSA-v2wj-q39q-566r, GHSA-p9ff-h696-f583.
* fix(deps): bump vite in backend lockfile to resolve audit failures
Vitest pulls in vite as a transitive dependency. Bumps to 8.0.5.
Add the ability to check for outdated nodes and trigger over-the-air
updates from Fleet View. Nodes self-update by pulling the latest Docker
image and recreating their container via the "last breath" pattern.
Backend:
- SelfUpdateService: self-container identification via HOSTNAME + Docker
Compose labels, triggers pull + force-recreate
- CapabilityRegistry: runtime capability disabling via disableCapability()
- POST /api/system/update (202 + deferred self-update)
- GET /api/fleet/update-status (version comparison across fleet)
- POST /api/fleet/nodes/:nodeId/update (single node)
- POST /api/fleet/update-all (bulk remote update)
- In-memory update tracker with 5-min timeout
Frontend:
- Node Updates modal with summary stats, search filter, table layout,
per-node Update buttons, and bulk Update All
- Version badges and update-available indicators on node cards
- ReconnectingOverlay for local node updates (polls /api/health)
- 5s fast-poll when any node is actively updating
- UpdateStatusBadge shared component for consistent badge rendering
Requires Skipper (Pro) tier. Nodes must be deployed via Docker Compose
with Docker socket access.
Add centralized credential storage for private Docker registries with
support for Docker Hub, GHCR, AWS ECR, and self-hosted registries.
- New `registries` table with AES-256-GCM encrypted secrets
- RegistryService with CRUD, test connectivity, Docker config generation
- 5 API endpoints gated by requireTeamPro + requireAdmin
- ComposeService injects credentials via temp DOCKER_CONFIG on deploy/pull
- ImageUpdateService passes stored credentials for private registry checks
- AWS ECR just-in-time token refresh via @aws-sdk/client-ecr
- RegistriesSection UI in Settings Hub with type-aware form
- Documentation with screenshots
Adds the ability to schedule recurring Docker operations (stack restarts,
fleet snapshots, system prunes) via cron expressions with full execution
history logging. Includes Run Now for on-demand execution.
* feat: SSO & LDAP authentication for Team Pro
Add SSO integration allowing Team Pro users to authenticate via LDAP/Active Directory, Google, GitHub, and Okta identity providers. SSO works alongside password authentication with auto-provisioning and role mapping.
- LDAP bind+search authentication with group-based role mapping
- OIDC/OAuth2 flows with PKCE and CSRF protection for Google, GitHub, Okta
- Auto-provisioning: first SSO login creates a Sencho account automatically
- Role mapping via LDAP group membership or OIDC JWT claims
- SSO settings UI in Settings → SSO with per-provider config and test connection
- SSO login buttons on login page with LDAP toggle
- Environment variable seeding for infrastructure-as-code workflows
- Secrets encrypted at rest via CryptoService (AES-256-GCM)
- Seat limit enforcement during auto-provisioning
- Full documentation: feature docs, quickstart guides, env var reference
* fix: resolve ESLint errors in SSO feature
- Remove unnecessary escape characters in regex character classes
- Remove unused `issuer` variable from OIDC callback handler
- Fix setState-in-effect lint error in Login.tsx by using useState initializer
- Suppress set-state-in-effect for SSOSection fetch pattern (matches existing codebase convention)
* docs: align documentation theme with Sencho app branding
- Change dark background from #0F172A (blue-tinted slate) to #090909 (neutral dark)
- Update accent colors to match app brand oklch(0.72 0.14 200)
- Add custom.css to increase navbar and footer logo size from 28px to 36px
* fix(deps): resolve npm audit vulnerabilities in backend
Fix path-to-regexp (high) and brace-expansion (moderate) via npm audit fix.
* feat(auth): redesign Login and Setup pages with split-panel branding layout
Replace plain Card-based Login and Setup forms with a professional
split-panel layout: always-dark branding panel (dot grid texture, logo,
tagline, cyan accent line) on the left, theme-aware form on the right.
Mobile collapses to single column with compact logo header.
- Add optional admin email field on Setup for license recovery
- Backend accepts and stores admin_email in setup endpoint
- Fix data-stacks-loaded attribute forwarding (wrap in div, use string values)
* docs: add license-settings and profile-dropdown screenshots
* fix(docs): correct logo paths from .svg to .png
* fix(deps): resolve picomatch high-severity vulnerability
* chore(deps): upgrade ESLint 9 → 10 with plugin compatibility fixes
- eslint: ^9 → ^10.0.0 (backend + frontend)
- @eslint/js: ^9 → ^10.0.0 (backend + frontend)
- eslint-plugin-react-refresh: ^0.4.24 → ^0.5.2 (ESM, config factory API)
- Update frontend eslint.config.js: destructured import for react-refresh,
call configs.vite() as factory function (0.5 API change)
- Downgrade new ESLint 10 rules (no-useless-assignment, preserve-caught-error)
to warnings for existing code patterns
- eslint-plugin-react-hooks stays at 7.0.1 (stable) with --legacy-peer-deps
until a stable release adds ESLint 10 peer support
* chore(deps): upgrade recharts 2.x to 3.8 with chart.tsx type fixes
recharts 3.x moved Tooltip/Legend props to context-based API.
Updated chart.tsx to use explicit prop interfaces with internal
recharts type imports (LegendPayload, TooltipPayload, TooltipFormatter).
* chore(deps): upgrade TypeScript 5.9 to 6.0
- Remove deprecated baseUrl from frontend tsconfig (paths works standalone in TS 6)
- Add react-is dependency required by recharts 3.x at build time
- Backend and frontend both compile and lint cleanly
* chore(deps): upgrade Vite 7.3 to 8.0 and @vitejs/plugin-react to 6.0
Vite 8 replaces Rollup+esbuild with Rolldown, significantly improving
build speed (~2s vs ~18s). No config changes required.
* fix(ci): add .npmrc with legacy-peer-deps for CI and Docker builds
typescript-eslint@8.x requires typescript <6.0.0 and
eslint-plugin-react-hooks@7.0.1 requires eslint <=9. Until upstream
packages release compatible versions, legacy-peer-deps is needed.
* docs: add logo assets and re-ignore CLAUDE.md
* fix(ci): copy .npmrc into prod-deps Docker stage
The prod-deps stage also runs npm ci with backend/package.json but was
missing the .npmrc needed to bypass peer dep conflicts.
SECURITY (critical fixes):
- Add authMiddleware to /api/system/console-token (was publicly accessible)
- Validate api_url on node create/update to prevent SSRF (rejects localhost/loopback)
- Add rate limiting (5 req/15 min/IP) to /api/auth/login and /api/auth/setup
- Fix path traversal in env_file resolution — absolute/escaping paths rejected
- Add stack name validation to GET routes (was only on PUT/POST)
- Add helmet security headers middleware
- Restrict CORS to FRONTEND_URL in production
PRODUCTION READINESS:
- Add GET /api/health public endpoint + HEALTHCHECK in Dockerfile
- Add SIGTERM/SIGINT graceful shutdown handler (drains connections, closes DB)
- Run container as non-root sencho user in Dockerfile
QUALITY:
- Fix 4 silent empty catch{} blocks in EditorLayout (now show toast.error)
- Connect ErrorBoundary to root App in main.tsx
- Replace WebSocket.Server with named WebSocketServer import (ESM compat)
TESTING (new automated test suite):
- Install Vitest; 38 backend tests across 4 suites covering validation utilities,
health endpoint, auth middleware, login flows, SSRF protection, and path traversal
- Extract isValidStackName/isValidRemoteUrl/isPathWithinBase to utils/validation.ts
- Playwright E2E scaffolding: auth, stacks, nodes specs + shared login helper
- CI: run Vitest + ESLint on every PR
Security:
- Strip auth credential keys (auth_username, auth_password_hash,
auth_jwt_secret) from GET /api/settings response
- Add allowlist guard to POST /api/settings — rejects unknown or
auth-namespace keys with a 400
Backend:
- Add PATCH /api/settings bulk endpoint with Zod schema validation
(type coercion, range checks, URL format) and atomic SQLite transaction
- Add system_state table — moves last_janitor_alert_timestamp out of
global_settings; adds getSystemState/setSystemState on DatabaseService
- Add metrics_retention_hours and log_retention_days configurable settings;
MonitorService reads both dynamically each evaluation cycle
- Add cleanupOldNotifications(days) to DatabaseService, called each cycle
Frontend:
- Replace single isLoading flag with per-operation states
(isSavingSystem, isSavingDeveloper, isSavingPassword, isSavingRegistry,
isSavingAgent/isTestingAgent per agent type)
- Add skeleton loader that blocks interaction until fetchSettings resolves
- Explicit key-picking in fetchSettings — auth keys cannot enter state
- Unsaved-changes amber dot on System Limits and Developer sidebar items
- Separate saveSystemSettings / saveDeveloperSettings — no cross-tab clobber
- Developer tab gains Data Retention section (metrics hours, log days)
- All settings saves use new PATCH /api/settings endpoint
Anso