* fix(sidebar): resolve stacks showing unknown status when compose name field is set
The bulk status endpoint matched containers to stacks using the
com.docker.compose.project Docker label, assuming it equals the stack
directory name. When a compose file declares a top-level name: field,
Docker Compose uses that as the project name instead, causing the
label lookup to miss those containers entirely.
The fix parses each stack's compose file to build a project-name-to-
directory mapping (cached with 60s TTL to avoid re-parsing on every
poll), with a fallback to the working_dir label for edge cases.
Also extracts compose file name variants into a shared constant and
fixes an ordering inconsistency in smartFallback.
* docs: add troubleshooting entry for stack status mismatch with name field
* feat(dashboard): redesign as DevOps command center
Transform the dashboard from a basic stats viewer into a high-signal
operational command center with 5 composable sections:
- Health status bar with system health derivation (Healthy/Degraded/Critical)
- Resource gauges with visual progress bars and threshold coloring
- Paginated stack health table with per-stack UP/DN, CPU, memory, and
click-to-navigate (8 per page)
- Enhanced historical CPU/RAM charts with skeleton empty states
- Recent alerts feed with severity-coded notifications
Extract monolithic HomeDashboard.tsx (447 lines) into composable
sub-components under dashboard/ directory. Remove Docker Run to Compose
converter from the landing surface. Add defensive .ok check on container
status fallback in EditorLayout.
* feat(dashboard): add Clear All Notifications button to Recent Alerts
Add a destructive ghost button below the alerts feed that calls
DELETE /api/notifications to clear all notifications, then refreshes
the list. Button only appears when there are alerts to clear.
* feat(dashboard): add pagination to Recent Alerts section
Same pattern as Stack Health table: 8 items per page with prev/next
chevron controls and page indicator in the card header. Pagination
auto-hides when there are 8 or fewer alerts. Page resets on clear all.
* fix(dashboard): resolve container count oscillation and add cursor hover detail
Fix container stats flickering between 0 and correct values by moving
state resets to the top of each useEffect body (runs once per node
switch, not on every poll tick). Add animate-ui cursor primitive and
wire it to the active containers number in ResourceGauges to show
managed/external breakdown on hover. Silence noisy Docker socket
errors when engine is unreachable.
* feat(dashboard): add cursor hover to health status with reason breakdown
Wrap the health badge (pulsing dot + label) in a CursorFollow tooltip
that explains why the node is Critical, Degraded, or Healthy. Shows
specific metrics (e.g. "RAM at 97.9%", "Disk at 96.4%") when hovered.
Displays "All systems nominal" for healthy nodes.
* fix(dashboard): resolve OOM from unbounded Docker stats polling
Three root causes addressed:
1. updateGlobalDockerNetwork had no overlap guard. When Docker was slow,
3-second interval ticks stacked up, creating dozens of concurrent
container.stats() calls that exhausted the heap. Added isUpdatingNetwork
flag and increased interval from 3s to 5s.
2. Historical metrics query returned ~20K rows (1-minute buckets x 14
containers x 24h). Downsampled to 5-minute buckets, reducing response
size by ~5x.
3. Dashboard polling continued when the browser tab was hidden, creating
phantom load. Replaced setInterval with visibilityInterval helper that
pauses polling on tab hide and resumes with an immediate fetch on focus.
* fix(dashboard): use loadFile for stack navigation from Stack Health table
The onNavigateToStack callback was only calling setSelectedFile and
setActiveView, skipping the full load flow (YAML content, env files,
containers, backup info). This caused the editor to show stale state
with a "Start" button for running stacks and empty YAML. Now calls
loadFile() which is the same path the sidebar uses.
* refactor(dashboard): simplify Containers card layout
Replace 2-column grid with vertical layout matching other gauge cards.
Active count uses text-2xl hero number, exited count sits in subtitle
position. Removed redundant total count row.
* fix(dashboard): unify notification types and fix multi-node clear
- Replace duplicate Notification interface in EditorLayout with shared
NotificationItem from dashboard/types.ts
- Tighten is_read type from number | boolean to number (matches SQLite)
- Pass notifications from EditorLayout (which aggregates all nodes) to
HomeDashboard as props, removing duplicate local-only polling from
useDashboardData
- Fix Clear All to use clearAllNotifications (deletes from all nodes)
instead of fetchNotifications (which was just a re-fetch, causing
remote notifications to reappear immediately after clearing)
- Delegate DELETE responsibility from RecentAlerts to parent handler
* fix(dashboard): handle optional nodeId in notification operations
Guard against undefined nodeId when calling fetchForNode for mark-read,
delete, and clear-all notification operations. The shared NotificationItem
type has nodeId as optional since the API response doesn't include it;
EditorLayout enriches it but TypeScript correctly flags the possibility.
* feat(stacks): state-aware sidebar context menu and Open App action
- Context menu now adapts to stack state: running stacks show
Stop/Restart/Update, stopped stacks show Deploy only
- Added "Open App" shortcut to open a stack's web UI directly
from the sidebar (visible when running with a published port)
- Backend bulk status endpoint enriched with mainPort detection
- Reduced manual image update check cooldown from 10 to 2 minutes
- Rate limit error message now derives from the configured constant
* fix(stacks): use const for bulkPorts (prefer-const lint)
* feat(stacks): per-stack action tracking, optimistic status, and bulk status endpoint
Replace global loadingAction mutex with per-stack tracking so users can
fire actions on multiple stacks concurrently. Add optimistic status
updates to fix sidebar showing "--" after stop/start. Add bulk
GET /api/stacks/statuses endpoint using a single docker.listContainers
call instead of N docker compose ps invocations (~21s → ~110ms for 3
stacks). Falls back to per-stack queries for remote nodes on older
versions.
* fix(stacks): remove stale 'start' action check from deploy button label
* feat(resources): add network management with create, inspect, and topology visualization
Add full Docker network CRUD: create networks with custom drivers, subnets,
and IPAM config; inspect network details including connected containers and
IP addresses; interactive topology graph visualization (Pro-gated to
Skipper/Admiral tiers). Includes backend routes, DockerController methods,
unit tests, documentation with screenshots, and updated changelog.
* refactor(resources): address code review findings for network management
- Add batch GET /api/system/networks/topology endpoint to eliminate N+1
HTTP calls from the topology view
- Export DockerNetwork type from ResourcesView, remove duplicate in
NetworkTopologyView
- Wire up isInspectLoading state to Eye button (spinner + disabled)
- Remove unnecessary wrapper div around FilterToggle
- NetworkTopologyView is now self-contained (fetches from batch endpoint,
no longer needs networks prop)
* fix(resources): align pre-existing UI with design system standards
- Replace hardcoded red-500 on image/volume delete buttons with
text-destructive/60 hover:bg-destructive tokens
- Replace shadow-sm with shadow-card-bevel on all cards (Disk Footprint,
Quick Clean, Resource Tabs, Unmanaged Containers)
- Add strokeWidth={1.5} to all action button Trash2 icons
- Type network drivers as union type instead of raw strings (backend
NetworkDriver type + frontend NETWORK_DRIVERS constant)
* fix(resources): add generic type args to useNodesState/useEdgesState
Fixes TS2345 build error in CI where tsc -b (strict mode via
tsconfig.app.json) infers never[] from untyped empty array literals
passed to React Flow hooks.
* fix(resources): replace explicit any in catch blocks with unknown narrowing
ESLint no-explicit-any errors in CI for three catch blocks added by the
network management feature.
Add console.warn/console.error logging to 22 silent catch blocks across
10 files. Errors in cleanup, migrations, SSO, fleet snapshots, shutdown,
and validation are now visible in logs. ENOENT guards added to
file-system catches to distinguish missing files from permission errors.
No control flow changes.
- Dispatch error alerts via NotificationService when scheduled tasks fail,
with info-level recovery notifications when a previously-failing task succeeds
- Per-service restart targeting: scheduled stack restarts can target specific
services instead of restarting the entire stack
- Prune label filter: scheduled prune operations can be scoped to resources
matching a specific Docker label
- CSV export button in the execution history panel for one-click download
- Fix: prune_targets was silently dropped on task creation (missing in INSERT)
- Classify all Docker images, volumes, and networks as managed (Sencho
stack), external (other Compose project), or unused/system via a new
getClassifiedResources() method and GET /api/system/resources endpoint
- Add pruneManagedOnly() + getDiskUsageClassified() to DockerController
- Prune buttons now default to Sencho-managed scope; "All Docker" is
hidden in a ⋮ dropdown with a distinct destructive confirm dialog
- Replace Reclaimable Space donut with interactive Docker Disk Footprint
widget (stacked bar with clickable segments that filter resource tabs)
- Add managed/external filter toggles and classification badges per tab
- GET /api/stats now returns managed + unmanaged container counts; Home
Dashboard Active Containers card subtitle shows "N managed · N external"
- Rename "Ghost Containers" tab/copy to "Unmanaged Containers" throughout
- Destroy Docker stats stream on WS close to prevent orphaned daemon polling
- Guard all ws.send() calls with readyState === OPEN check
- Add .catch() to unawaited streamStats/execContainer calls to prevent
unhandled rejections crashing the process (Node >= 15)
- Close per-connection WebSocket.Server instances after handleUpgrade to
prevent listener accumulation over many connections
- Invert auth token precedence to bearerToken || cookieToken in both
authMiddleware and the WS upgrade handler so node-to-node Bearer tokens
are never shadowed by a stale browser cookie
- Narrow proxyRes type in remoteNodeProxy error handler before calling
.status() to avoid throwing on raw Socket (WS/TCP-level proxy errors)
Add Node modal — type selector & state reset:
- Restored a Local/Remote <Select> dropdown in renderFormFields so users can
explicitly choose the node type instead of it defaulting silently to 'remote'.
- Switching type clears api_url and api_token so no stale remote credentials
carry over if a user switches from Remote to Local mid-form.
- Replaced the static "Add Remote Node" title with a dynamic one that reflects
the currently selected type ("Add Local Node" / "Add Remote Node").
- onOpenChange now resets formData to defaultFormData whenever the dialog
opens, preventing stale values from a previous session leaking in.
Remote connection details — real metrics:
- testRemoteConnection previously returned hard-coded '-' for containers,
images, and cpus after a successful auth/check ping.
- Now fires three parallel requests (Promise.allSettled) after auth passes:
/api/stats → containers total + running count
/api/system/stats → cpu.cores
/api/system/images → image list length
- Each field falls back to '-' gracefully if an endpoint is unavailable,
so a slow or older remote instance never breaks the connection test.
DEP0060 util._extend suppression:
- http-proxy@1.18.1 calls util._extend when createProxyServer() is first
invoked at runtime (NOT at import time). A process.emitWarning override
placed before the proxy instantiations intercepts only DEP0060 without
suppressing any other warnings. No package version changes needed.
Also includes linter/formatter normalisation across multiple files.
Anso