* fix(security): harden Trivy scan lifecycle, logging, and docs
- Call TrivyService.initialize() at startup so capability state is
accurate before first request; add periodic re-detect to the scheduler
so newly installed Trivy binaries light up without a restart.
- Add markStaleScansAsFailed sweep (+ idx_vuln_scans_status index) to
recover any scan row left in_progress after a crash or timeout; sweep
runs before the paid-tier gate so every tier self-heals.
- Split scanImage persistence into beginScan/finishScan so the manual
scan route owns a single code path and can return a scanId synchronously
while work continues asynchronously.
- Validate image refs on /api/security/scan and /sbom via new utility;
defense-in-depth against shell-metacharacter payloads.
- Dispatch a warning-level alert when a post-deploy scan fails so the
operator has a user-visible path to the failure instead of a silent log.
- Share DIGEST_CACHE_TTL_MS and severity ordering across service and
route layers; remove dead invalidateDetection().
- Add [Trivy:diag] logging gated behind developer_mode for support
diagnostics; production logs unchanged.
- Frontend: defensive toast fallback chain, sr-only SheetDescription,
and a truncation badge when the 500-item detail fetch is capped.
- Tests: extend trivy-service and vulnerability-db suites; add
image-ref and severity unit tests.
- Docs: expand vulnerability-scanning troubleshooting with recovery,
re-detect, and diagnostic-log guidance; link Dockerfile comment to
trivy-setup.
* fix(security): drop unnecessary escape in image-ref forbidden-char regex
* feat(images): Trivy-powered vulnerability scanning
Scan container images for known CVEs via Trivy. On-demand scanning and
severity badges are available on every tier; scheduled scans, scan
policies, SBOM generation, and scan history are gated to Skipper+.
- New TrivyService (binary detection, per-image scan, SBOM, digest cache)
- Three new tables: vulnerability_scans, vulnerability_details, scan_policies
- 12 routes under /api/security (scan, results, summaries, SBOM, policies, compare)
- Post-deploy async scans wired into all five deploy paths, with a
per-deploy opt-out toggle in the App Store deploy sheet
- "scan" action type added to SchedulerService for fleet-wide recurring scans
- Frontend: severity badges in Resources Hub with animated cursor detail,
scan results drawer with vulnerability table and filters, and a new
Security section in Settings for scan policy CRUD
- Policy threshold violations dispatch a warning or critical alert based on
the policy's block_on_deploy flag; deploys themselves are never blocked
* fix(security): compute scan age in useEffect to satisfy react-hooks/purity
* fix(container-exec): harden with security fixes, validation, and test coverage
- Enforce admin role at WebSocket upgrade for container exec sessions
- Validate container is running before creating exec
- Fix bash-to-sh fallback (move .start() inside try/catch)
- Register container-exec as a capability for fleet visibility
- Add standard and diagnostic logging for exec lifecycle
- Fix false Admiral license claim in API docs
- Fix design system violations in BashExecModal (hardcoded colors)
- Remove duplicate legacy xterm dependencies
- Add 18-test suite covering auth, validation, fallback, and cleanup
* fix(container-exec): use correct Duplex type for exec stream
The stream variable was typed as NodeJS.ReadWriteStream, which lacks
.destroy(). Dockerode's Exec.start() returns stream.Duplex per its
type definitions. This caused tsc to fail while Vitest (which skips
full type checking) passed.
Nodes with a trailing slash in api_url (e.g. http://host:3000/) caused
fetchRemoteMeta to construct a double-slash URL (http://host:3000//api/meta),
which failed silently. The update-status endpoint then returned version: null
for the remote node, triggering a false "Update available" badge.
Every other URL construction in the codebase already strips the trailing
slash; this was the one call site that was missed.
* fix(fleet): resolve stuck update states and improve update UX
The fleet node update flow had several bugs: the in-memory update tracker
never cleared terminal states (timeout, failed, completed), leaving nodes
permanently stuck with no way to retry or dismiss. The Recheck button
only re-fetched stale state without clearing it, and the POST trigger
rejected retries with 409 even after timeout.
Backend fixes:
- Add DELETE endpoints (single node + batch) to clear tracker entries
- Fix 409 race: detect expired timeouts and clear terminal states before
re-triggering
- Populate error messages in the tracker for timeouts and failures
- Include error field in the update-status API response
- Auto-expire completed entries after 60 seconds
Frontend fixes:
- Add retry (RotateCcw) and dismiss (X) buttons on failed/timed-out badges
- Show error details via animated cursor hover (CursorFollow pattern)
- Recheck button now batch-clears all terminal states before fetching
- Recheck shows loading spinner and disables while checking
- Extract NodeCardProps interface for readability
* fix(fleet): detect update completion via process start time
Remote nodes that cannot report their version (e.g. older builds)
caused updates to always time out because completion detection
relied solely on version comparison. The gateway now tracks the
remote node's process start time from /api/meta and detects
container restarts by comparing it across polls.
Also extracts a createTracker() factory to eliminate repeated
object construction across 5 call sites.
* docs: add troubleshooting for first-update timeout on old nodes
Adds a new troubleshooting entry explaining why the first remote
update on nodes running pre-v0.40.0 always times out (neither
version nor process start time can be detected). Documents the
fix: dismiss, recheck, and confirm the node updated.
Also adds a screenshot of the timed-out state with retry/dismiss
buttons to the remote updates feature page.
* fix(fleet): detect update completion via offline detection and error reporting
The update completion detection relied on version change and process
start time, both of which fail on nodes running older Sencho versions
that report "unknown" and lack the startedAt field. This caused every
update to time out after 5 minutes.
Add three-signal detection: version change, process restart (startedAt),
and offline/online detection (node went unreachable during update and
came back). Also add a 90-second early failure heuristic for when the
remote image pull fails silently, and surface pull errors from
SelfUpdateService via /api/meta so the gateway can report them
immediately.
* fix(deps): bump vite to 8.0.5 to resolve high severity vulnerabilities
Fixes GHSA-4w7w-66w2-5vf9, GHSA-v2wj-q39q-566r, GHSA-p9ff-h696-f583.
* fix(deps): bump vite in backend lockfile to resolve audit failures
Vitest pulls in vite as a transitive dependency. Bumps to 8.0.5.
* fix(fleet): resolve version detection using package.json over stale generated constant
resolveVersion() previously returned the build-time SENCHO_VERSION
constant without checking the root package.json. When a branch fell
behind a release-please version bump, the generated constant was stale,
causing remote nodes to show "unknown" version and false "Update
available" badges. The function now walks up to the root package.json
first (authoritative source) and falls back to the generated constant
only if the walk fails.
* fix(fleet): resolve stuck update states and improve update UX
The fleet node update flow had several bugs: the in-memory update tracker
never cleared terminal states (timeout, failed, completed), leaving nodes
permanently stuck with no way to retry or dismiss. The Recheck button
only re-fetched stale state without clearing it, and the POST trigger
rejected retries with 409 even after timeout.
Backend fixes:
- Add DELETE endpoints (single node + batch) to clear tracker entries
- Fix 409 race: detect expired timeouts and clear terminal states before
re-triggering
- Populate error messages in the tracker for timeouts and failures
- Include error field in the update-status API response
- Auto-expire completed entries after 60 seconds
Frontend fixes:
- Add retry (RotateCcw) and dismiss (X) buttons on failed/timed-out badges
- Show error details via animated cursor hover (CursorFollow pattern)
- Recheck button now batch-clears all terminal states before fetching
- Recheck shows loading spinner and disables while checking
- Extract NodeCardProps interface for readability
* fix(fleet): detect update completion via process start time
Remote nodes that cannot report their version (e.g. older builds)
caused updates to always time out because completion detection
relied solely on version comparison. The gateway now tracks the
remote node's process start time from /api/meta and detects
container restarts by comparing it across polls.
Also extracts a createTracker() factory to eliminate repeated
object construction across 5 call sites.
* docs: add troubleshooting for first-update timeout on old nodes
Adds a new troubleshooting entry explaining why the first remote
update on nodes running pre-v0.40.0 always times out (neither
version nor process start time can be detected). Documents the
fix: dismiss, recheck, and confirm the node updated.
Also adds a screenshot of the timed-out state with retry/dismiss
buttons to the remote updates feature page.
* fix(fleet): detect update completion via offline detection and error reporting
The update completion detection relied on version change and process
start time, both of which fail on nodes running older Sencho versions
that report "unknown" and lack the startedAt field. This caused every
update to time out after 5 minutes.
Add three-signal detection: version change, process restart (startedAt),
and offline/online detection (node went unreachable during update and
came back). Also add a 90-second early failure heuristic for when the
remote image pull fails silently, and surface pull errors from
SelfUpdateService via /api/meta so the gateway can report them
immediately.
* fix(deps): bump vite to 8.0.5 to resolve high severity vulnerabilities
Fixes GHSA-4w7w-66w2-5vf9, GHSA-v2wj-q39q-566r, GHSA-p9ff-h696-f583.
* fix(deps): bump vite in backend lockfile to resolve audit failures
Vitest pulls in vite as a transitive dependency. Bumps to 8.0.5.
* fix(fleet): resolve version detection pipeline for Docker builds
The Dockerfile backend-builder stage was missing a COPY of the root
package.json, causing generate-version.js to fall back to "0.0.0-dev"
at build time. At runtime, the filesystem walk also failed (root
package.json not in the final image), producing the string "unknown"
which the frontend rendered as "vunknown".
Changes:
- Dockerfile: copy root package.json into backend-builder stage
- CapabilityRegistry: return null (not "unknown") for unresolvable
versions; add isValidVersion() type guard; normalize remote meta
responses to strip "unknown"/"0.0.0-dev" sentinel values
- Fleet endpoints: hoist gateway version validation outside per-node
loops; treat unresolvable remote versions as "potentially outdated"
instead of silently marking them up to date
- FleetView: guard all version display points (card badge, update
button, gateway label, modal columns) via shared formatVersion()
- EditorLayout, CapabilityGate: use shared isValidVersion utility
- New frontend/src/lib/version.ts shared utility
- Docs: add troubleshooting section for version display edge cases
- Screenshots: updated Fleet Overview and Node Updates modal
* docs: update fleet node updates screenshot with live remote node
* fix(fleet): resolve getSenchoVersion crash in Docker containers
Replace the runtime __dirname walk (which fails in Docker because the
root package.json is absent from the final image) with a build-time
version injection. A prebuild script reads the root package.json and
generates src/generated/version.ts with the version baked in as a
constant. The compiled output carries the correct version regardless
of the container's filesystem layout.
Retains a filesystem walk fallback for dev environments where the
prebuild hook may not have run.
* fix(fleet): skip postinstall version generation when script is absent
The Docker prod-deps stage copies only package.json (no source files)
before running npm ci --omit=dev. The postinstall hook now checks for
the script file before executing, so it no-ops in stages where
scripts/generate-version.js has not been copied.
getSenchoVersion() used require('../../../package.json') which resolves
correctly in dev (src/services/ -> 3 up -> root) but fails in Docker
where the compiled file is at dist/services/ (2 levels from /app/).
The 500 error on /api/meta caused fetchRemoteMeta to always return
empty capabilities, blocking all capability-gated features on remote
nodes. Replace with a __dirname-based walk that finds the root
package.json (name === 'sencho') regardless of directory depth.
Accept legacy tier ('pro') and variant ('personal', 'team') names from older
remote nodes, normalizing them to current values ('paid', 'skipper', 'admiral')
in authMiddleware. This fixes distributed license enforcement failing between
v0.38.3 and v0.38.0 nodes due to the tier rename in v0.38.1.
Also fixes:
- Self-healing getVariant() that cross-checks stored variant_type against
product/variant name metadata on every call, correcting stale cached values
from previous buggy resolution logic
- Unguarded API responses in ResourcesView causing potential t.map crashes
- Fleet update status now polls on a 120s interval (was only fetched on mount)
- fetchRemoteMeta failures now logged for diagnosability
Add the ability to check for outdated nodes and trigger over-the-air
updates from Fleet View. Nodes self-update by pulling the latest Docker
image and recreating their container via the "last breath" pattern.
Backend:
- SelfUpdateService: self-container identification via HOSTNAME + Docker
Compose labels, triggers pull + force-recreate
- CapabilityRegistry: runtime capability disabling via disableCapability()
- POST /api/system/update (202 + deferred self-update)
- GET /api/fleet/update-status (version comparison across fleet)
- POST /api/fleet/nodes/:nodeId/update (single node)
- POST /api/fleet/update-all (bulk remote update)
- In-memory update tracker with 5-min timeout
Frontend:
- Node Updates modal with summary stats, search filter, table layout,
per-node Update buttons, and bulk Update All
- Version badges and update-available indicators on node cards
- ReconnectingOverlay for local node updates (polls /api/health)
- 5s fast-poll when any node is actively updating
- UpdateStatusBadge shared component for consistent badge rendering
Requires Skipper (Pro) tier. Nodes must be deployed via Docker Compose
with Docker socket access.
* feat(nodes): add capability-based node compatibility negotiation
Each Sencho instance now exposes /api/meta with its version and supported
capabilities. When the user switches nodes, the frontend fetches this
metadata and disables features the remote node doesn't support via a
CapabilityGate overlay. Version is shown in the node switcher dropdown
and connection test results.
- Backend: CapabilityRegistry with static capability list and fetchRemoteMeta helper
- Backend: /api/meta (public) and /api/nodes/:id/meta (auth) endpoints
- Frontend: NodeContext enhanced with per-node meta caching (5min TTL)
- Frontend: CapabilityGate component with typed Capability union
- Frontend: 13 features wrapped with capability gates
- Docs: node-compatibility.mdx + OpenAPI spec updates
* fix(nodes): revert to require() for package.json version reading
The static import fails in the Docker multi-stage build because the
root package.json is not copied into the backend-builder stage. The
require() call resolves at runtime when the file is available.
Anso