* feat(auth): add TOTP two-factor authentication with backup codes
Adds RFC 6238 time-based one-time password support to every tier,
integrated with the existing password and SSO login paths.
Backend:
- New MfaService wrapping otplib with a plus or minus 1 step tolerance,
base32 secret generation, and hashed single-use backup codes (bcrypt).
- user_mfa and mfa_used_tokens tables in DatabaseService. The second
table is a DB-backed replay blacklist, purged on a 60s interval.
- authMiddleware now recognizes an mfa_pending scope. A token carrying
that scope is rejected on every route except the MFA challenge and
logout, so no API surface is reachable before the second factor
clears.
- /api/auth/login issues only a short-lived mfa_pending cookie when the
user has MFA enrolled. /api/auth/login/mfa consumes that cookie,
verifies the code (or backup code), and swaps in a real session.
- /api/auth/mfa/* routes for status, enrol/start, enrol/confirm,
disable, backup-code regenerate, and SSO-bypass opt-in.
- Admin recovery path: POST /api/users/:id/mfa/reset clears the target's
MFA state, bumps token_version, and writes an audit log entry.
- CLI emergency fallback: backend/src/cli/resetMfa.ts is wired via
`npm run reset-mfa <username>` and also exported for tests.
- SSO flows (LDAP and OIDC) gate on user_mfa.sso_enforce_mfa before
issuing a session; default behaviour keeps the SSO path frictionless.
- Per-user lockout after 5 consecutive failed codes (15 min).
Frontend:
- AppStatus gains an mfa-challenge branch driven by /api/auth/status.
- New MfaChallenge screen, MfaEnrollDialog (QR plus manual secret plus
backup codes), MfaDisableDialog, MfaBackupCodesDialog.
- Account section shows a Two-factor authentication card with enrol,
regenerate, disable, and the SSO-enforce toggle (shown only when SSO
providers are configured).
- Users section gains a Reset 2FA action for admins.
Docs:
- New user guide at features/two-factor-authentication.mdx.
- New admin guide at operations/two-factor-admin.mdx.
- SSO page cross-links to the 2FA doc.
* fix(mfa): drop unused TEST_PASSWORD import and stale eslint disable
* fix(mfa): simplify e2e openAccountSettings helper to match working pattern
* fix(mfa): make e2e suite self-contained and always clean up
Test #2 called loginAs() before the MFA challenge step, which waited for
the dashboard indicator that never appears once the previous test enrolled
the user. That timeout skipped the rest of the serial block, including
the disable step, leaving MFA enabled and breaking every later spec.
Two fixes:
- Tests #2 and #3 now navigate directly to the login page instead of
piggybacking on loginAs, which only handles the password-only path.
- A new afterAll hook unconditionally disables MFA via the API using two
unused backup codes, so the DB is reset even if a test fails midway.
* fix(e2e): use backup code for mfa recovery to avoid totp replay race
The final recovery step in the backup-code replay test previously
generated a fresh TOTP to sign back in. When the timing landed inside
the same 30-second window that test #2 consumed, the server's replay
blacklist correctly rejected it, producing a ~50% flake rate. Backup
codes are single-use and sidestep the replay window, so the recovery
becomes deterministic.
* fix(e2e): drive mfa disable test through the challenge screen
Test #4 called loginAs after test #3 left MFA enabled, but loginAs
waits for the dashboard indicator and does not handle the challenge
screen, so it timed out. Drive the login manually, satisfy the
challenge with a backup code, and use a backup code for the disable
step too to avoid any TOTP replay-window race against earlier tests
in the serial block.
* feat(git-sources): link stacks to Git repositories with diff-and-apply workflow
Add Git Sources so any stack can point at an HTTPS Git repository, branch, and
compose file path. Pulls fetch + validate the incoming commit, store a
diffable pending snapshot, and apply writes only after explicit confirmation
(or automatically, per the configured apply mode). Sibling .env sync is
optional. Works on the Community tier.
Apply modes:
- Review only: mark pending, wait for manual apply in the diff dialog
- Auto-write: write compose + env to disk, do not redeploy
- Auto-deploy: write files and run docker compose up -d
Webhook integration: webhooks can target the new "git-pull" action to trigger
a sync from CI. Per-source debounce prevents runaway pipelines from hammering
the repository host. Tokens are encrypted at rest and never returned to the
frontend.
Docs and tests included. Screenshots and Playwright E2E flows to follow.
* fix(git-sources): drop unnecessary useMemo on commit sha slice
React Compiler's lint rule rejected the manual dependency list because the
inferred dep ('pull') was less specific than the written one ('pull?.commitSha').
The computation is a cheap 7-char slice, so drop the useMemo entirely rather
than fight the rule.
* test(git-sources): add Playwright E2E flows and drop orphan source rows on stack delete
- E2E coverage: non-HTTPS URL rejected client-side, unreachable repo surfaces
a toast error on save, and configure+remove walks the AlertDialog confirm path.
- Deleting a stack now also drops its linked Git source row so a future stack
with the same name starts clean rather than inheriting a stale config.
Every published Sencho Docker image is now signed with Sigstore cosign
using GitHub Actions keyless OIDC, and ships with an embedded SBOM plus
SLSA provenance attestation attached as OCI referrers on the image.
Users can verify the signature and inspect the attestations themselves
before pulling an image into production.
cosign verify saelix/sencho:<tag> \
--certificate-identity-regexp "https://github.com/AnsoCode/Sencho/.*" \
--certificate-oidc-issuer https://token.actions.githubusercontent.com
The release pipeline now also publishes a new moving minor tag
(saelix/sencho:X.Y, e.g. 0.42) alongside the existing latest and
immutable X.Y.Z tags, so operators who want the latest patch on a given
minor line can pin without chasing every release. Since every 0.x minor
is potentially breaking, the {{major}}-only tag is deferred until 1.0.
cosign is installed via the sigstore/cosign-installer action pinned to
a full commit SHA. The signing step batches every tag produced by
metadata-action into a single cosign invocation pinned to the built
digest, so all tags resolve to the same manifest and we save N-1
Rekor/Fulcio round trips. The job declares id-token: write so the
ambient OIDC token can be minted.
A new docs page (docs/reference/verifying-images.mdx) walks users
through installing cosign, verifying an image, and inspecting the SBOM
and provenance with docker buildx imagetools. A note calls out that
signatures start shipping with v0.43.0, so older images failing
verification is expected behavior and not tampering.
Surface six dedicated email channels (support, contact, licensing,
security, privacy, conduct) across contextually appropriate locations:
- security.txt: create .well-known/security.txt for app (RFC 9116)
- SECURITY.md: add security@sencho.io as alternative to GitHub reporting
- PaidGate/AdmiralGate: add licensing@sencho.io to upgrade prompts
- docs: new Contact & Support reference page listing all channels
- CHANGELOG: document additions under [Unreleased]
Website changes (separate repo): privacy@sencho.io in Privacy/Terms
pages, licensing@sencho.io in Refund page and pricing footer,
contact@sencho.io in website footer.
Add the ability to check for outdated nodes and trigger over-the-air
updates from Fleet View. Nodes self-update by pulling the latest Docker
image and recreating their container via the "last breath" pattern.
Backend:
- SelfUpdateService: self-container identification via HOSTNAME + Docker
Compose labels, triggers pull + force-recreate
- CapabilityRegistry: runtime capability disabling via disableCapability()
- POST /api/system/update (202 + deferred self-update)
- GET /api/fleet/update-status (version comparison across fleet)
- POST /api/fleet/nodes/:nodeId/update (single node)
- POST /api/fleet/update-all (bulk remote update)
- In-memory update tracker with 5-min timeout
Frontend:
- Node Updates modal with summary stats, search filter, table layout,
per-node Update buttons, and bulk Update All
- Version badges and update-available indicators on node cards
- ReconnectingOverlay for local node updates (polls /api/health)
- 5s fast-poll when any node is actively updating
- UpdateStatusBadge shared component for consistent badge rendering
Requires Skipper (Pro) tier. Nodes must be deployed via Docker Compose
with Docker socket access.
* feat(nodes): add capability-based node compatibility negotiation
Each Sencho instance now exposes /api/meta with its version and supported
capabilities. When the user switches nodes, the frontend fetches this
metadata and disables features the remote node doesn't support via a
CapabilityGate overlay. Version is shown in the node switcher dropdown
and connection test results.
- Backend: CapabilityRegistry with static capability list and fetchRemoteMeta helper
- Backend: /api/meta (public) and /api/nodes/:id/meta (auth) endpoints
- Frontend: NodeContext enhanced with per-node meta caching (5min TTL)
- Frontend: CapabilityGate component with typed Capability union
- Frontend: 13 features wrapped with capability gates
- Docs: node-compatibility.mdx + OpenAPI spec updates
* fix(nodes): revert to require() for package.json version reading
The static import fails in the Docker multi-stage build because the
root package.json is not copied into the backend-builder stage. The
require() call resolves at runtime when the file is available.
Route stack alerts to specific Discord, Slack, or webhook channels instead
of the single global endpoint. Includes per-rule enable/disable, priority
ordering, and automatic fallback to global agents when no rule matches.
- Add notification_routes table, interface, and CRUD in DatabaseService
- Add routing logic in NotificationService.dispatchAlert with optional stackName
- Pass stack context from MonitorService (crash/health) and SchedulerService
- Add 5 API endpoints gated with requireAdmin + requireAdmiral
- Add NotificationRoutingSection UI with Combobox stack picker, channel tabs
- Parallel webhook dispatch via Promise.allSettled
- 10 unit tests covering routing, fallback, and edge cases
- Documentation with screenshots at docs/features/notification-routing.mdx
* feat(labels): add stack_labels schema and DatabaseService CRUD methods
* feat(labels): add label CRUD, assignment, and bulk action API routes
* feat(labels): add oklch label color palette for light and dark themes
* feat(labels): add LabelPill and LabelDot reusable components
* feat(labels): add LabelAssignPopover component for inline label management
* feat(labels): add label pill bar, label dots, and label assignment to sidebar
* feat(labels): add label filtering and label dots to fleet view
* feat(labels): add label-scoped bulk actions (deploy/stop/restart all)
* docs: add Stack Labels feature documentation
* fix(labels): use context menu sub-menu for label assignment and add settings integration
Replace broken Popover-inside-ContextMenu pattern with native Radix
ContextMenuSub for reliable label toggling on right-click. Wrap
ContextMenuSubContent in a Portal to prevent overflow clipping. Add
"Manage labels..." item that opens Settings directly to Labels section.
Fix close button overlap in LabelsSection header. Add LabelsSection
settings component with full CRUD, assignment counts, and ProGate.
Add initialSection prop to SettingsModal for deep-linking. Include
screenshots for documentation.
* docs: update stack labels documentation with screenshots and corrected instructions
* fix(labels): address security and quality issues from code review
- Add NaN validation on parseInt(req.params.id) in label routes
- Scope updateLabel/deleteLabel by nodeId to prevent cross-node IDOR
- Validate labelIds belong to correct node in setStackLabels
- Add requireAdmin check on bulk action endpoint
- Replace error: any with error: unknown and proper narrowing
- Remove unused Label import from index.ts
- Remove unused isPro prop from LabelsSection
- Add strokeWidth={1.5} to Check icons per design system
* chore: update CHANGELOG with stack labels feature
* feat(auto-update): add auto-update policies and fix image update detection
Auto-Update Policies (Skipper+ tier):
- New scheduled task action type 'update' for check-then-update flow
- Dedicated AutoUpdatePoliciesView with CRUD, cron presets, and run history
- Conditional tier gating: Skipper gets auto-update, Admiral gets full scheduled ops
- Backend executeUpdate: checks digests, pulls only if newer, atomic redeploy
Image Update Detection fixes (all tiers):
- Fix stack name key mismatch: use working_dir label instead of project label
- Add 5-minute periodic frontend polling for background check results
- Replace fixed 3s timeout with polling-based manual refresh via /api/image-updates/status
- Clear update status after successful stack update
* fix(ui): remove Skipper tier badge from Auto-Update Policies header
* fix(ui): remove auto-update action from Scheduled Operations view
Admiral users have a dedicated Auto-Update view — showing update tasks
in Scheduled Operations too was confusing duplication. Each view now
owns a distinct, non-overlapping set of action types.
* fix(auto-update): fix node-stack linking and add All Stacks option
- Stack dropdown now re-fetches when node selection changes using
fetchForNode, and resets the selected stack
- Node selector moved above stack selector with stack disabled until
a node is picked
- Added "All Stacks" wildcard option that checks and updates every
stack on the selected node
- Backend executeUpdate refactored to iterate over all stacks when
target_id is "*", with per-stack error isolation
* refactor(ui): replace Select dropdowns with searchable Combobox component
Add a reusable Combobox component with inline search and use it for
Node/Stack selectors in both Auto-Update Policies and Scheduled
Operations dialogs. Also fixes node-stack linking bug where changing
node didn't update the stack list.
* fix(ui): resolve CI TypeScript errors in Combobox and ScheduledOperationsView
Add missing searchPlaceholder prop to ComboboxProps interface and remove
dead 'update' action filter that conflicted with the narrowed type union.
* fix(ui): use Geist Sans font in toast component
The toast renders via React portal on document.body, bypassing the app's
font inheritance. Add explicit font-family declaration using var(--font-sans)
to match Sencho's design system.
Sencho is self-hosted so the Mintlify "Try it" playground can never
reach a user's instance (CORS + localhost). Switch to "simple" mode
which keeps the endpoint URL/method as a copyable reference without
the misleading Send button.
Add a complete OpenAPI 3.1 specification covering ~55 public API endpoints
across 8 categories (Stacks, Containers, API Tokens, Webhooks, Nodes, Fleet,
Scheduled Tasks, Health). Wire it into Mintlify via native OpenAPI rendering
with an interactive "Try It" playground and a dedicated API Reference tab.
Includes an API overview page documenting authentication, token scopes,
node routing, error format, license tier requirements, and WebSocket endpoints.
Compose v2.40.3 was compiled with Go 1.24.9, grpc 1.74.2, and
x/crypto 0.38.0 — all below the minimum safe versions identified
in the March 2026 security audit. Upgrading to v5.1.1 (Go 1.25.8,
x/crypto 0.46.0) resolves CVE-2025-68121, CVE-2025-61726,
CVE-2025-61729, CVE-2026-25679, and CVE-2025-47913.
CVE-2026-33186 (grpc ≥1.79.3) remains unresolved — no upstream
Docker CLI or Compose release includes grpc past 1.78.0 yet.
CVE-2026-33671 (picomatch) and CVE-2026-33747/33748 (buildkit) were
already patched in prior releases.
Add centralized credential storage for private Docker registries with
support for Docker Hub, GHCR, AWS ECR, and self-hosted registries.
- New `registries` table with AES-256-GCM encrypted secrets
- RegistryService with CRUD, test connectivity, Docker config generation
- 5 API endpoints gated by requireTeamPro + requireAdmin
- ComposeService injects credentials via temp DOCKER_CONFIG on deploy/pull
- ImageUpdateService passes stored credentials for private registry checks
- AWS ECR just-in-time token refresh via @aws-sdk/client-ecr
- RegistriesSection UI in Settings Hub with type-aware form
- Documentation with screenshots
Adds the ability to schedule recurring Docker operations (stack restarts,
fleet snapshots, system prunes) via cron expressions with full execution
history logging. Includes Run Now for on-demand execution.
Add long-lived API tokens with three permission scopes (read-only,
deploy-only, full-admin) for CI/CD pipelines, scripts, and automation.
- Database: api_tokens table with SHA-256 hashed storage
- Auth: extend middleware to authenticate Bearer API tokens
- Scope enforcement: middleware restricts actions per token scope
- API: CRUD endpoints gated behind Team Pro + admin
- UI: ApiTokensSection in Settings Hub with create/revoke/copy flows
- Docs: new api-tokens.mdx with usage examples and screenshots
* feat: SSO & LDAP authentication for Team Pro
Add SSO integration allowing Team Pro users to authenticate via LDAP/Active Directory, Google, GitHub, and Okta identity providers. SSO works alongside password authentication with auto-provisioning and role mapping.
- LDAP bind+search authentication with group-based role mapping
- OIDC/OAuth2 flows with PKCE and CSRF protection for Google, GitHub, Okta
- Auto-provisioning: first SSO login creates a Sencho account automatically
- Role mapping via LDAP group membership or OIDC JWT claims
- SSO settings UI in Settings → SSO with per-provider config and test connection
- SSO login buttons on login page with LDAP toggle
- Environment variable seeding for infrastructure-as-code workflows
- Secrets encrypted at rest via CryptoService (AES-256-GCM)
- Seat limit enforcement during auto-provisioning
- Full documentation: feature docs, quickstart guides, env var reference
* fix: resolve ESLint errors in SSO feature
- Remove unnecessary escape characters in regex character classes
- Remove unused `issuer` variable from OIDC callback handler
- Fix setState-in-effect lint error in Login.tsx by using useState initializer
- Suppress set-state-in-effect for SSOSection fetch pattern (matches existing codebase convention)
* feat: audit logging, secrets at rest, and legacy cleanup
- Add Team Pro audit log: records all mutating API actions with user
attribution, searchable timeline UI with filtering and pagination
- Add AES-256-GCM encryption at rest for node API tokens via CryptoService
- Drop 9 legacy SSH/TLS columns from nodes table (dead since v0.7)
- Remove orphaned MaintenanceModal.tsx (dead code, never imported)
- Add requireTeamPro backend guard for team-tier features
- Add audit log cleanup (90-day retention) to MonitorService
- Add docs page and navigation entry for audit log feature
* fix: remove unused AUTH_TAG_LENGTH constant from CryptoService
* docs: align documentation theme with Sencho app branding
- Change dark background from #0F172A (blue-tinted slate) to #090909 (neutral dark)
- Update accent colors to match app brand oklch(0.72 0.14 200)
- Add custom.css to increase navbar and footer logo size from 28px to 36px
* fix(deps): resolve npm audit vulnerabilities in backend
Fix path-to-regexp (high) and brace-expansion (moderate) via npm audit fix.
* chore: remove CLAUDE.md and MANUAL_STEPS.md from git tracking
These files contain internal project instructions that should not be
public. Both are now in .gitignore to prevent re-tracking.
* chore: remove build output and generated files from git tracking
Remove backend/public/ (frontend build artifacts) and backend/cookies.txt
from tracking. Add demo-video/ and website/ to .gitignore.
* docs: align mintlify theme with website and app branding
Update colors to brand cyan, add Geist font, dark mode default,
gradient background, navbar with GitHub link and CTA, and footer
matching the website structure.
* feat: add RBAC viewer accounts, atomic deployments, and fleet-wide backups (Pro)
Introduces three Pro-tier features:
- RBAC: Multi-user system with admin/viewer roles, user management UI,
automatic migration from single-admin credentials, viewer restrictions
across the entire UI (read-only editor, hidden action buttons)
- Atomic Deployments: Pre-deploy file backup to .sencho-backup/, automatic
rollback on health probe failure, manual rollback button, health probes
added to stack updates, webhook-triggered deploys use atomic rollback
- Fleet-Wide Backups: Point-in-time snapshots of compose files across all
nodes (local + remote), stored centrally in SQLite, per-stack restore
with optional redeploy, graceful handling of offline nodes
* fix(settings): use correct ProGate prop name in UsersSection
* fix(settings): remove unused isPro prop from UsersSection
* fix(auth): fetch user info after login and setup so isAdmin is set correctly
* feat(pricing): revise pricing strategy and enforce variant-based seat limits
Raise Personal Pro from $49/yr to $69/yr with 3 viewer seats (up from 1).
Add $15/mo billing option for Team Pro. Mark lifetime pricing as a
90-day early-adopter offer. Store Lemon Squeezy variant_name on
activation/validation and enforce seat limits server-side per variant.
* feat(licensing): add Lemon Squeezy checkout, webhook, and billing portal integration
Server-side checkout URL generation (POST /api/checkout) with admin email
pre-fill and instance_id custom data. HMAC-SHA256 verified webhook endpoint
(POST /api/webhooks/lemonsqueezy) handling order, subscription, and payment
lifecycle events for automatic license activation. Customer billing portal
link stored from webhook events and exposed via GET /api/billing/portal.
In-app checkout buttons in Settings with manual license key fallback.
* fix(licensing): exempt Lemon Squeezy webhook from auth middleware
The catch-all auth middleware on /api/* was blocking the public webhook
endpoint. Added /webhooks/lemonsqueezy to the exemption list alongside
/auth/* and /webhooks/:id/trigger.
* feat(pricing): update pricing to final live rates
Personal Pro: $7.99/month, $69.99/year, $249 lifetime.
Team Pro: $49.99/month, $499.99/year, $1,499 lifetime.
Added personal_monthly checkout variant across backend, frontend, and website.
* refactor(licensing): remove server-side checkout/webhook for self-hosted model
Sencho is self-hosted — each user runs their own instance, so there is
no central server to receive webhooks or hold the store API key. Replaced
in-app checkout buttons with a "View Pricing" redirect to sencho.io and
kept manual license key activation as the primary flow.
- Delete LemonSqueezyService (checkout, webhook, HMAC verification)
- Remove POST /api/checkout, GET /api/billing/portal, POST /api/webhooks/lemonsqueezy
- Remove raw body parser and auth exemption for webhook route
- Remove all LEMONSQUEEZY_* env vars from .env.example
- Replace checkout buttons in SettingsModal with single "View Pricing" button
- Simplify LicenseContext checkout to open sencho.io pricing page
- Update licensing docs to reflect website-based purchase flow
* chore: normalize em-dashes to hyphens across codebase (linter)
* chore: remove accidentally tracked directories from index
* feat: add RBAC viewer accounts, atomic deployments, and fleet-wide backups (Pro)
Introduces three Pro-tier features:
- RBAC: Multi-user system with admin/viewer roles, user management UI,
automatic migration from single-admin credentials, viewer restrictions
across the entire UI (read-only editor, hidden action buttons)
- Atomic Deployments: Pre-deploy file backup to .sencho-backup/, automatic
rollback on health probe failure, manual rollback button, health probes
added to stack updates, webhook-triggered deploys use atomic rollback
- Fleet-Wide Backups: Point-in-time snapshots of compose files across all
nodes (local + remote), stored centrally in SQLite, per-stack restore
with optional redeploy, graceful handling of offline nodes
* fix(settings): use correct ProGate prop name in UsersSection
* fix(settings): remove unused isPro prop from UsersSection
* fix(auth): fetch user info after login and setup so isAdmin is set correctly
Add custom webhooks allowing external CI/CD systems (GitHub Actions, GitLab CI, etc.)
to trigger stack actions via HTTP POST with HMAC-SHA256 signature authentication.
Includes webhook CRUD management UI in Settings, execution history tracking,
one-time secret reveal, enable/disable toggle, and comprehensive documentation.
Add fleet health summary cards, container-level drill-down, node sorting
and filtering, fleet-wide search, and critical node detection to the
Fleet View. Fix ProGate to wrap placeholder content and add error toasts.
* feat(auth): redesign Login and Setup pages with split-panel branding layout
Replace plain Card-based Login and Setup forms with a professional
split-panel layout: always-dark branding panel (dot grid texture, logo,
tagline, cyan accent line) on the left, theme-aware form on the right.
Mobile collapses to single column with compact logo header.
- Add optional admin email field on Setup for license recovery
- Backend accepts and stores admin_email in setup endpoint
- Fix data-stacks-loaded attribute forwarding (wrap in div, use string values)
* docs: add license-settings and profile-dropdown screenshots
* fix(docs): correct logo paths from .svg to .png
* fix(deps): resolve picomatch high-severity vulnerability
Anso