21 Commits

Author	SHA1	Message	Date
Anso	f7f3afe05a	feat(stacks): one-click import for stray compose files (#1320) ... * feat(stacks): move discovered import candidates into place The guided import flow previewed loose and nested compose files but could not act on them, so it only told the user where to move files by hand. Add an opt-in "Move into place" action: relocate a loose-root file into its own <name>/ subfolder, or promote a nested stack directory one level up, so Sencho's filesystem discovery lists it as a stack. The file stays a plain compose file on disk; nothing is captured into a store. The move re-derives the candidate from a fresh scan and matches by location, validates the destination name and containment, resolves symlinks before the rename, and never overwrites an existing stack. Backend and frontend both gate the action on stack:create. Also fix the rescan flicker: scan results now stay on screen while a rescan runs (only the Rescan button shows progress) instead of the whole panel collapsing to a spinner, and an empty rescan surfaces a toast. * fix(stacks): make import-move destination creation atomic The loose-root branch created the destination directory with mkdir recursive after an access() existence precheck. If the destination appeared between the check and the create, recursive accepted the existing directory and the following rename could overwrite a same-named compose file inside it, so the intended conflict response never fired. Use a non-recursive mkdir so a destination that already exists raises a conflict instead of being merged into. Add a regression test that forces the precheck to miss and asserts the existing file is left intact. * fix(stacks): only offer not-yet-imported compose files in the import tab The import tab listed every compose file in the compose directory, including ones that are already stacks (a top-level subfolder with a compose file), which just duplicated the sidebar. The scan now skips those and surfaces only files that still need importing: a compose file loose at the compose-dir root, or one nested a folder too deep. Also harden the move-into-place write path that turns a stray file into a stack: a failed rename after the destination folder is created now rolls back the empty folder, so a retry is not blocked by a false "already exists" conflict, and the move switches on an exhaustive set of placements so a new one cannot silently take the wrong branch. The sidebar refreshes after a move so the imported stack appears right away, and the docs describe import as relocating a file, not capturing running containers. * fix(stacks): reject a nested import whose compose file escapes the base The move-into-place path for a nested compose file validated only the parent directory's real path, not the compose file itself. A directory that is real and inside the compose base but holds a compose file symlinked outside the base would survive the directory move and become a stack whose compose file still points outside the base, which the editor read path would then follow. The move now resolves the compose file too and refuses it unless it stays inside the resolved source directory, matching the loose-root check and the scan's preview reader. * fix(stacks): satisfy CodeQL path and log analysis in import-move The import-move write path built its destination directory from the user-provided stack name through resolveStackDir, whose containment barrier is wrapped in a helper that static analysis does not credit, so every filesystem sink on the destination was flagged as path injection. Re-establish the resolve-against-the-safe-base plus startsWith barrier inline at the sinks, matching the read and backup paths in the same file, and route the relocated file path through the same check. The name is already restricted to an alphanumeric, hyphen, and underscore allowlist, so the containment can never actually fail; this only makes the existing safety visible to the analyzer. Also log the move route's error as a sanitized message rather than the raw error object, so a name embedded in an error message cannot forge log lines.	2026-06-05 22:35:04 -04:00
Anso	865d792874	feat(pricing): collapse to two tiers (#1309) ... * feat(pricing): collapse to two tiers (Community + Admiral) Collapse Sencho's pricing from three tiers (Community / Skipper / Admiral) to two: a generous free Community tier and a single paid Admiral tier. The Skipper tier is removed. Now free in Community: auto-heal, auto-update, scheduled operations, webhooks, notification routing, Fleet Actions and bulk operations, SSO preset providers (Google / GitHub / Okta), unlimited users with admin and viewer roles, and deploy safety (atomic deploys, auto-rollback, and one-click rollback). Admiral (paid) is focused on running and governing a fleet: blueprints, Fleet Secrets, deploy enforcement, vulnerability report export, audit log, host console, private registries, mesh networking, node cordon, managed cloud backup, LDAP / Active Directory SSO, and the advanced RBAC roles (deployer, node-admin, auditor) with per-resource scoped assignments. Internally the license variant distinction is removed so tier is binary (community / paid). License validation still verifies the Lemon Squeezy store and product before granting paid status. Docs and the contributor guide are updated to the two-tier model. * docs(pricing): correct licensing page to two-tier pricing and tidy stale tier wording The licensing docs page kept the old Admiral pricing plus a Founder Lifetime column and an Enterprise paragraph after the two-tier collapse. Update it to $12/month or $99/year, drop the lifetime and Enterprise content, and link to the pricing page for current pricing. Also fix stale "Skipper" wording in CLA.md, SUPPORT.md, one test title, and three test comments. Historical CHANGELOG entries and the retired-Skipper license-guard test are intentionally left as-is. * docs: align licensing and SSO pages with the two-tier model Correct the SSO overview so the Google, GitHub, and Okta presets read as available on every tier, matching the provider table; only LDAP and Active Directory require Sencho Admiral. Remove the lifetime-plan references from the licensing, settings, and troubleshooting pages so they reflect subscription-only Admiral pricing. * fix(rbac): omit scoped permissions from /me on the Community tier Scoped role assignments only take effect on the paid tier, but GET /api/permissions/me returned them unconditionally, so a downgraded instance with leftover assignments rendered per-resource affordances the API then rejected with 403. The endpoint now mirrors the permission middleware and includes scoped permissions only on the paid tier. Adds a regression test covering the downgrade case. * docs: use custom-pricing wording on the contact page The two-tier model has no Enterprise tier; reword the contact page's enterprise pricing/deals to custom pricing/deals so it does not imply a tier that no longer exists.	2026-06-04 17:45:53 -04:00
Anso	06b25262cc	feat(stacks): guided first stack import flow (#1285) ... * feat(stacks): add guided first stack import flow Add an Import mode to the Create Stack dialog and a zero-stacks empty state so a new user who already has compose files on disk can land their first stack without reading the docs first. A read-only scan of the compose directory (GET /api/stacks/import/scan) lists the compose files it finds with a dry preview of each file's services, ports, volumes, and env files. Each result is labelled by placement: already a stack, loose at the root of the compose directory, or one folder too deep, with the exact path to move misplaced files to. The scan never writes, moves, or changes any files. Manual stack creation (Empty, From Git, From Docker Run) is unchanged. * fix(stacks): read import-scan candidates via a single file handle Open the compose file once and stat plus read on the same descriptor so the size check and the read observe the same inode, instead of resolving the path twice (stat then readFile), which is a time-of-check/time-of-use race. Mirrors the existing handle-based readers in FileSystemService. * fix(stacks): confine import scan to the compose dir and refine the empty state Harden the read-only import scan: - Resolve symlinks and confirm the real target stays inside the compose directory before reading a candidate, and reject non-regular files, so a symlinked compose file or parent cannot expose a file outside the compose directory through the preview (matches resolveSafeStackPath). - Read at most the stat-reported size (bounded by the 1 MiB cap) from the open handle, so a file that grows after the size check cannot exceed the cap. - Log when the compose directory or a subdirectory cannot be read, so an access failure is not silently reported as "no compose files found". Only show the first-run "No stacks yet" prompt when no filter chip is active, so a filter that matches nothing is not mistaken for an empty fleet.	2026-06-02 16:10:05 -04:00
Anso	adcd04b01a	refactor(auto-update): retire per-stack gate, drive auto-update from schedules only (#1233) ... * refactor(auto-update): retire per-stack gate, drive auto-update from schedules only The per-stack Auto-update toggle in the stack sidebar context menu wrote a gate row to `stack_auto_update_settings`, but actual updates only ran when a `scheduled_tasks` row with `action='update'` fired. On a fresh install the toggle was inert: detection ran every 6h, nothing was applied. The same context menu already exposes `Schedule task`, which opens ScheduledOperationsView pre-filled for the stack where the user can pick `Auto-update Stack` and any cron. Keeping the toggle alongside that flow duplicated the same action and turned the gate table into a parallel store of "is a covering schedule active" derivable from `scheduled_tasks` itself. Drop the gate model entirely: - Backend: remove the `stack_auto_update_settings` table and its four accessors, the three routes under /api/stacks/*/auto-update, the per-stack skip in /api/auto-update/execute and SchedulerService.executeUpdate's fleet branch, and the clearStackAutoUpdateSetting call on stack delete. Dashboard `autoUpdate` count derives from scheduled_tasks (action='update' rows pinned to the node, total/enabled split). - Frontend: drop the Auto-update entry from the sidebar context menu and its optimistic toggle plumbing. Drop autoUpdateSettings state, the /stacks/auto-update-settings fetch, and the auto-update-settings-changed WebSocket branch. Slim useSidebarActivitySummary (just nextRunAt; no enabled/total counts). AutoUpdateReadinessView's per-card autoUpdateEnabled now means "a covering enabled action='update' schedule exists" (per-stack row or fleet row on this node, earliest next_run_at wins, per-stack row wins on ties), with the gate-fetch removed. - New: scheduledTasksRouter broadcasts scope: 'scheduled-tasks' on POST, PUT, PATCH /toggle, and DELETE so useConfigurationStatus and useNextAutoUpdateRun refetch under the 250ms debounce instead of waiting for the 60s poll. The broadcast is wrapped so a broken subscriber socket cannot turn a successful mutation into a 500. - Docs: rewrite the "Per-stack control" section of auto-update-policies.mdx to describe the schedule-based model; update the matching troubleshooting entry. The misleading fleet-update help text in ScheduledOperationsView is corrected to reflect that every stack on the node is covered. Tier parity: the surviving auto-update path (Schedule task -> Auto-update Stack / All Stacks) is gated `requirePaid + requireAdmin` backend and `isPaid + isAdmin` frontend, matching the gate the deleted routes carried. The pre-commit grep returns no tier-related diff outside this PR's scope. No data migration is provided: greenfield rules apply, and the leftover table on already-shipped instances is harmless because no code reads or writes it after this PR. * docs: sweep remaining references to the per-stack auto-update toggle The previous commit retired the per-stack Auto-update gate in favor of configuring auto-update purely through scheduled tasks. This commit removes the now-stale mentions of that toggle across the operator docs: - docs/features/sidebar.mdx: drop the Auto-update entry from the Inspect group description, the matching screenshot alt-text, and the Skipper Note that listed it. Schedule task now carries the cross-link to Auto-Update Policies. - docs/features/stack-management.mdx: drop the Auto-update list item; refresh the Schedule task entry to mention the Auto-update Stack action. - docs/features/dashboard.mdx: rename the Configuration Status row from "Auto-update stacks" to "Auto-update schedules" with the new value shape, and rewrite the troubleshooting accordion to describe the scheduled-tasks invalidation path. - docs/features/scheduled-operations.mdx: rewrite the Auto-update All Stacks row and helper text to reflect that every stack on the node is covered (no per-stack opt-out from this surface anymore). - docs/features/multi-node.mdx: rewrite the Updates column definition to derive the Auto/Off flag from enabled Auto-update Stack / Auto-update All Stacks schedules instead of the removed per-stack policy. The auto-update-policies.mdx rewrite in the previous commit already covered the main reference page. The sidebar-context-menu.png screenshot will be refreshed on release once the new menu is live in production; the alt text is updated in this commit so it accurately describes the shipping state. No website edits needed: the Auto-Update Policies feature card description ("Schedule automatic image pulls and redeployments per stack on your own cadence") and the feature matrix labels ("Auto-update stack schedule", "Auto-update all stacks schedule") remain accurate under the new model. * fix(stacks): drop orphaned requireAdmin import after auto-update route removal CI's backend lint step flagged this PR's earlier deletion of the three /api/stacks/*/auto-update routes: those handlers were the only callers of `requireAdmin` inside routes/stacks.ts, leaving the named import on line 15 unreferenced. `requirePaid` and `effectiveTier` from the same line are still in use elsewhere in the file and stay. tsc --noEmit does not flag unused named imports; ESLint's no-unused-vars does. Local backend lint reproduces and now reports 0 errors against the existing 334-warning baseline.	2026-05-26 11:08:33 -04:00
Anso	8ba88755b1	fix(stacks): default Empty template ships ports block commented out (#1189) ... The Empty branch of the Create Stack flow wrote a compose.yaml whose first service bound the host's port 8080 by default. On any workstation already running something on 8080 (traefik, caddy, librespeed, another nginx, etc.) the very first deploy failed at the docker compose networking step with "Bind for 0.0.0.0:8080 failed: port is already allocated", which made the day-one experience feel broken right after F-2 (PR #1168) tightened the dialog itself. The boilerplate in FileSystemService.createStack now emits the ports block commented out plus a one-line hint above it. A fresh deploy binds no host port, so the container starts cleanly on any host; the user uncomments the two-line block when they're ready to expose the container. The deterministic shape (no probe-and-write, no random port, no preflight scan) avoids the TOCTOU race that a free-port probe would have left between template creation and the actual compose up. Adds backend/src/__tests__/file-system-service-create-stack.test.ts (8 cases): directory + file creation, structural YAML assertions via yaml.parse to lock in the no-live-ports invariant, raw-text regex to lock in the commented hint, and the already-exists rejection path. FileSystemService.createStack had no coverage before this change. Adds e2e/default-stack-template-no-fixed-port.spec.ts (1 case): drives the dialog through Create, reads the resulting compose via the in-browser apiFetch, and asserts the live + commented invariants end-to-end. docs/features/stack-management.mdx Empty bullet rewritten to describe the minimal skeleton and the commented ports block instead of calling it "blank". Resolves: F-3 in the v1.0 audit tracker.	2026-05-24 01:06:22 -04:00
Anso	0be479100c	docs: v1 docs refresh (#966) ... * docs(introduction): rewrite intro page and refresh screenshots Rewrite the Getting Started introduction to reflect the current product: adds the Mesh, Blueprints, Pilot, Fleet, Resources concepts up front; restructures capability sections around Stacks, Fleet (now including Fleet Actions), Mesh, Blueprints, Monitoring, Resources, Security, Automation, and Pilot/Remote ops; cross-links every claim to the matching feature page. Replaces the dashboard hero shot with a fresh capture against the redesigned cockpit chrome and adds three inline shots (running stack with anatomy and logs, fleet command deck, resources hub with reclaim header). All screenshots taken at 1920x900, dark theme, with node names, usernames, IPs, and home paths neutralized. Drops outdated claims: stale "190+ templates" count, the "viewer accounts" RBAC summary, and the "atomic" deployment label that did not match the actual rollback mechanism. * docs(introduction): add Federation and Fleet Secrets Federation has shipped (Admiral) with cordon and pin policy as operator overrides on the blueprint reconciler. Fleet Secrets is landing as a Skipper+ tab for versioned env-var bundles encrypted at rest, with diff preview and target push. Mirror those in the Run-one-machine-or-many bullet list and in the Tiers paragraph so the introduction matches the current product. * docs(introduction): re-shoot screenshots against v0.72.0 production Re-capture all four introduction screenshots from the upgraded production node so the fleet view shows the current full tab strip (Overview / Snapshots / Status / Deployments / Traffic / Federation / Fleet Actions / Secrets) instead of the older Overview / Snapshots / Status only. Same 1920x900 dark-theme capture and the same PII scrub applied (node names, usernames, IPs, home paths neutralized). * docs(quickstart): rewrite around v0.72.0 cockpit and add screenshots Replaces the bare install snippet with a five-minute walkthrough that matches the redesigned UI. Leads with a docker-compose.yml block (the bare docker run command is collapsed in an Accordion), keeps the 1:1 path rule, and adds two new sections that show the user what happens on first boot. Adds two screenshots at 1920x900 dark theme: - setup-cold-start.png: the Cold start card with Username, Password, Confirm password fields, and the Initialize console button. - dashboard.png: the post-sign-in dashboard captured against v0.72.0 with the full top nav (Home, Fleet, Resources, App Store, Logs, Auto-Update, Console, Audit, Schedules) and the populated Stack health table sorted by load. Where-to-next now uses CardGroup cols=2 to match the introduction page's pattern. * docs(configuration): align env var reference with current backend Bring docs/getting-started/configuration.mdx up to date with the v0.72.0 backend: - Remove PORT from the optional env vars table. The listen port is hardcoded to 1852 in backend/src/helpers/constants.ts and is never read from the environment. Replace it with a Listen port section that explains the fixed port and host-port remapping. - Document API_RATE_LIMIT (default 200) and API_POLLING_RATE_LIMIT (default 300), both applied in production only. - Note the /app/compose fallback default for COMPOSE_DIR while still pointing readers at the 1:1 path rule. - Point the SSO env var section at the new SSO Quickstart page and keep the SSO feature reference as the deeper dive. - Tighten First boot and cross-link to Quickstart so the screenshot is not duplicated. - Add a Where to next CardGroup matching the refreshed Introduction and Quickstart pages. Drop stale PORT=1852 and JWT_SECRET=your-secure-jwt-secret-here lines from .env.example so the example no longer contradicts the docs (PORT is hardcoded, JWT_SECRET is auto-generated and persisted to the database during initial setup). * docs(configuration): replace em-dash-substitute hyphens in prose Three sentences used ` - ` (space-hyphen-space) as an em-dash substitute. Replaced with the punctuation that fits each case: - "How Sencho organizes your compose directory": semicolon between the two related clauses. - Data directory Warning: parentheses around the parenthetical insertion. - 1:1 path rule explanation: comma before the contrastive clause. Heading slugs and YAML code-block comments are unchanged. * docs(sso): refresh setup guide and drop misleading "one-click" wording Brings the SSO Setup Guide in line with how SSO actually works in the current build, and corrects misleading copy across both SSO docs pages. - Setup Guide: explains the env-var-seeds-once / DB-is-authoritative config model up front, replacing per-section "Restart Sencho" wording that implied a restart was always required. - Setup Guide: promotes the per-provider Test Connection button out of the LDAP-only paragraph into a generic intro callout, and adds a self-signed LDAPS tip. - Setup Guide: notes that all OIDC providers accept a *_DISPLAY_NAME override for the login button label, and adds a commented LDAP TLS toggle to the full compose example. - Setup Guide: adds two screenshots of the redesigned Settings > SSO panel (overview + LDAP card expanded with form). - Both pages: replaces "one-click presets" / "one-click configuration" with "preset providers". The Skipper-tier presets still require an OAuth app provisioned in the provider's console; what they actually buy is provider-aware defaults and a branded login button. The old wording overpromised. * docs(features-overview): regroup catalog and add 17 missing features Restructure the Features Overview into the same six groups the docs sidebar uses (Stacks & Deployments, Observability, Fleet & Multi-Node, Security & Identity, Automation, Platform) plus a short Reference tail. Add catalog entries for 17 shipped features that the previous overview never mentioned: Stack Activity, Stack File Explorer, Deploy Progress, Deploy Enforcement, Blueprints, Git Sources, Global Search, Pilot Agent, Sencho Mesh, Fleet Federation, Fleet Actions, Fleet Sync, Fleet Secrets, Two-Factor Authentication, CVE Suppressions, Auto-Heal Policies, Stack Sidebar. Fix two factual inaccuracies: - Fleet View blurb wrongly gated search, sort, filter, and stack drill-down behind Skipper. The deep-dive is explicit that those are available on every tier; only the bulk Update All action inside the Node Updates modal is paid. - Auto-update entry was titled and described as a scheduling system. The deep-dive page is the Auto-Update Readiness board (risk tags, changelog previews, rollback targets); the scheduler lives under Scheduled Operations. Add three hero screenshots captured from production at 1920x900, illustrating the redesigned cockpit visual language: Home dashboard, stack anatomy, and fleet topology. * docs(stack-management): refresh page around v0.72.0 cockpit and add screenshots Updates the Stack Management page to match the current UI: sidebar with filter chips and label groups, bulk mode, restructured kebab menu, two-tab anatomy panel, and three-source New stack dialog (Empty, From Git, From Docker Run). Adds sections for Filter chips, Pinned and label groups, and Bulk mode. Restructures the Stack context menu around the inspect, organize, lifecycle, and destructive groups with their keyboard shortcuts. Documents the From Git tab and cross-links Git Sources for the full sync flow. Replaces every existing screenshot with fresh captures from the current UI and adds eight new captures for the new sections. Cross-links Stack Activity, Stack Labels, Stack File Explorer, Compose Editor, Atomic Deployments, Scheduled Operations, Auto-Heal Policies, Auto-Update Policies, and Alerts and Notifications for features documented on their own pages. * docs(stack-activity): refresh page around v1 cockpit and recapture screenshots Realign the page with the current Anatomy panel tab strip and the StackActivityTimeline component: - Frame the Activity tab as a sibling of Anatomy under the right-hand panel, with files/edit actions belonging to the strip. - Expand the category guidance: list the five iconized categories and call out that other stack-scoped notifications (deploy failure, available image updates, auto-heal triggers, monitor alerts, scan findings) flow into the timeline with a generic icon. - Tighten the actor-attribution rule to match the component: omitted for events without an actor and for system-driven events. - Add the day-format example to the relative-time row. - Recapture both screenshots from a populated stack (Today + Yesterday + Earlier with three distinct icons) and an empty stack. - Convert troubleshooting blurbs to H3 for anchor links and consistency with the v1-refresh sibling pages. * docs(stack-activity): wrap troubleshooting entries in Accordion blocks Match the foldable troubleshooting pattern established by docs/features/deploy-progress.mdx so the page stays compact and readers can scan to their issue. This is the canonical formatting for the /features section's troubleshooting blurbs going forward. * docs(editor): refresh page around v1 cockpit and recapture screenshots Rewrites the page around the dual-mode right panel (Anatomy by default, Monaco when the user clicks edit), the redesigned Command Center action bar, the new container row layout with status badges and live stats, the Structured / Raw terminal logs toggle, the Git Source toolbar button, and the opt-in diff preview. Drops the obsolete persistent embedded terminal section. Preserves the #diff-preview-before-save and #log-viewer anchors referenced from settings.mdx and global-observability.mdx. Replaces editor-overview.png and container-exec-modal.png with fresh captures against v0.72.0 production at 1920x900 dark theme; renames container -actions.png to containers-list.png; adds command-center.png and editor-edit-mode.png. PII scrubbed (host paths normalized) and the compose-diff-preview/diff-modal.png shared asset is left untouched after visual diff against the live UI showed no chrome change. * docs(features): wrap troubleshooting accordions in AccordionGroup Wraps the loose <Accordion> blocks in editor.mdx and stack-activity.mdx in a single <AccordionGroup> to match the troubleshooting design used by fleet-federation.mdx. Structural only; no content changes. * docs(stack-file-explorer): refresh page around v1 explorer and add screenshots Full rewrite to match the live two-pane Files tab. Replaces the false 'Edit' toolbar flow with the read-only chip + always-on Save model, fixes the protected-files list (5 names) and dedicated-tab redirect list (3 names), drops the fabricated 100 MB download cap, and corrects the upload claim to single file at a time. Adds sections for New File, Rename, Permissions, the type-to-confirm protected-file delete flow, the non-empty folder delete confirmation, the 500-entry tree display cap, and the symlink rendering. Restructures troubleshooting around <AccordionGroup> + <Accordion> to match fleet-federation.mdx, and adds two new entries (display cap, 403 on Community admin write). Ships nine screenshots captured against v0.72.0 production at 1920x900 in dark theme: overview, two-pane layout, protected-tree-marker, viewer-edit-mode, new-file-dialog, context-menu-folder, context-menu-file, permissions-dialog, delete-protected-confirm. * docs(deploy-progress): rewrite around current modal + capture v1 screenshots Aligns the page with the v0.72.0 implementation and standardizes the troubleshooting layout with the rest of the docs refresh. Setting and gating - Renames the Settings field to "Deploy progress modal" and quotes the current helper text verbatim. Documents that the toggle is off by default, lives under Settings > Appearance > Display, is stored in localStorage, and syncs across tabs in the same browser. Modal anatomy - Names every visible UI string: header verbs, status indicator (with the "closes in <n>s" countdown that was previously undocumented), empty-body strings, footer toggle that flips between "Raw output" and "Hide raw", and the destructive border on ERR rows vs the softer warn tint on WARN rows. - Replaces the vague "after a few seconds" with the actual 4-second auto-close timer; documents hover-to-pause and the leave-hover-restarts-the-countdown behavior. - Documents the truncated error message in the failed-state header and the manual close-only requirement. - Notes that the pill is portal-mounted and survives navigation. Stage badges - Keeps the 9-badge table but adds an honest note that most lines render as LOG because the badges are gated on Compose's "[+]" progress prefix, which Compose only emits in TTY mode and Sencho spawns it without one. Entry points - Splits the supported actions into the four that produce a populated structured-log body (Deploy, Update, Install, Git Apply) and the two that bypass compose and finish with 0 lines (Restart, Stop). Drops the "Down" claim from the user-facing list since no UI control currently triggers it; mentions the down route as an automation surface only. Troubleshooting - Wraps the existing accordions in an <AccordionGroup> matching the pattern used by the editor and stack-activity refreshes. Adds two new entries: one explaining the Restart/Stop "0 lines" outcome, one explaining the LOG-everywhere case for non-TTY compose output. Screenshots (six PNGs in docs/images/deploy-progress/, 1920x900, dark theme, captured against the upgraded production node) - setting-toggle.png: the Display section with the toggle enabled. - modal-streaming.png: a real update in flight at 19s, 554 lines. - modal-succeeded.png: succeeded state with the live closes-in countdown visible. - modal-raw-output.png: structured rows with the Raw output panel expanded beneath. - pill.png: minimized pill anchored bottom-center on a stack editor view. - modal-failed.png: failed state with the truncated error in the header and ERR rows highlighted. * docs(resources): refresh Resources Hub page for v1 redesign and feature additions Rewrite the page to match the shipping UI and replace stale screenshots with fresh captures of the redesigned chrome. - Document the admin-only Reclaim hero and clarify the per-tile Sencho-only vs. All Docker (includes external) split in Quick Clean. - Add coverage of the Scan history toolbar button and the per-row severity badge plus shield-icon scan dropdown in the Images tab; cross-link to the vulnerability scanning page. - Correct the Volumes column list (no Size column; size lives on the Largest 5 landing card) and call out admin gates on browse and delete. - Spell out the List/Topology view-mode toggle and that Create Network is admin-only and List-mode only. - Rewrite the Unmanaged tab section around the project-grouped layout, the Select all + Purge Selected (N) admin-only multi-select, and the empty state copy. - Replace screenshots: resources-reclaim, networks-list, create-network, network-inspect, network-topology, network-topology-toggle. Add fresh resources-volumes-tab and resources-unmanaged-tab captures. * docs(app-store): refresh page around v1 deploy sheet, scan integration, and registry settings Rewrites the App Store reference to match the current cockpit: - Documents the weekly-rotated featured banner picked from the top-5 by GitHub stars and the star-descending grid sort. - Adds the deploy-sheet structure (breadcrumb, meta line, About panel with Read more) and splits the Advanced tab into Ports, Volumes, Environment variables, Custom variables, and Security subsections. - Documents the Trivy-gated Security checkbox, atomic vs non-atomic deploys by tier, and the rollback semantics driven by error class. - Adds a Watching the deploy section linking to the deploy-progress modal. - Rewrites the Custom registry section against the new two-panel settings layout (Default + Custom) with the URL validation rule and the using default / using custom hint. - Adds a four-entry Accordion troubleshooting block in the house style. - Replaces three screenshots and adds two (Advanced tab, Settings registry panel) captured against the production node. Permissions wording aligns with current backend (admin only); the broader stack:create gate will land in a follow-up fix branch. * docs(app-store): describe inline port-conflict messaging on deploy sheet Update the deploy-sheet section to match the visible port-conflict behavior: the Essentials tab surfaces a Port-conflict warning that replaces the defaults hint when any default port is already bound, and the Advanced tab shows an inline "in use by {stack}" message next to the container port instead of a hover-only tooltip. Refresh the screenshot alt-text and the troubleshooting Accordion to match. * docs(app-store): align permissions note with stack:create gate Pairs with the backend gate swap in fix/templates-deploy-rbac (#986) which moves POST /api/templates/deploy from requireAdmin to requirePermission('stack:create'). Updates the Note block under 'Watching the deploy' so the docs match the new behavior: admin and node-admin can deploy templates from the App Store; viewer, deployer, and auditor cannot.	2026-05-07 23:44:13 -04:00
Anso	945259f048	refactor(frontend): migrate CreateStackDialog to Modal chrome system (D-4) (#908) ... * refactor(frontend): migrate CreateStackDialog to Modal chrome system (D-4) Swap raw shadcn Dialog/DialogContent/DialogHeader/DialogFooter for the Modal/ModalHeader/ModalBody/ModalFooter primitives shipped in D-1 and introduce an inline ModeRail to replace the TabsHighlight chip. The new chrome carries the cyan rail, mono kicker (STACKS · NEW), italic serif title, and contextual footer hints per mode (ALPHANUMERIC · HYPHENS, HTTPS REPOS ONLY, CONVERT FIRST / YAML READY + line-count accent). ModeRail implements the full WAI-ARIA tabs pattern: aria-selected on the active tab, aria-controls/role=tabpanel/aria-labelledby linkage to each mode panel, roving tabIndex (active=0, inactive=-1), and ArrowLeft / ArrowRight / Home / End keyboard navigation matching the contract that the prior shadcn Tabs primitive provided. Each mode also gains an explicit Cancel button alongside the existing primary action, the empty-mode primary button is now disabled until the stack name is non-empty, and the ModeRail disables itself while a Git or docker-run create is in flight. The async handlers (handleCreateStack, handleCreateStackFromGit, handleConvertDockerRun, handleCreateStackFromDockerRun) and form-reset helpers are unchanged; this PR is structural plus the segmented-control redesign called out in the migration tracker as the D-4 risk note. * test(e2e): align git-sources spec with new CreateStackDialog title D-4 renamed the dialog title from "Create New Stack" to "New stack". The shared openCreateStackDialog helper in git-sources.spec.ts was still asserting the old literal, so three tests in the "Create stack from Git" group failed at the helper's first assertion. Update the assertion to match the shipped title and refresh the two stale references in docs/features/stack-management.mdx so the docs stay in sync with the UI copy. * test(e2e): use dialog accessible name in openCreateStackDialog helper The previous helper used getByText('New stack') which matched two elements: the dialog title h2 and the sr-only description (which starts "Create a new stack: empty, ..." and contains the substring). Playwright fails with a strict mode violation. Switch to getByRole('dialog', { name: 'New stack' }), which asserts the dialog by its accessible name (provided by DialogTitle via the Radix aria-labelledby wiring). One match, more precise, and independent of any future description copy.	2026-05-04 11:17:29 -04:00
Anso	6986b927e3	feat(stacks): per-service start/stop/restart lifecycle actions (#778) ... * feat(stacks): add per-service start/stop/restart lifecycle routes Adds POST /:stackName/services/:serviceName/{start,stop,restart} routes that operate on containers belonging to a single Compose service, using the same Engine API pattern as the existing stack-level lifecycle routes. Includes isValidServiceName validator and audit-summary entries for the three new paths. * test(stacks): add per-service action route tests * test(stacks): fix test quality issues in service action tests * feat(stacks): add per-service lifecycle menu to container cards * fix(stacks): handle paused container state in service action menu * docs(stacks): add per-service lifecycle actions documentation * docs(stacks): add validation screenshots for per-service lifecycle actions	2026-04-25 17:26:04 -04:00
Anso	9e41d5e6b8	feat(stack-view): anatomy panel replaces always-open yaml (#690) ... * feat(stack-view): anatomy panel replaces always-open yaml Introduce StackAnatomyPanel as the default right-column surface of the stack view, replacing the always-visible Monaco YAML editor. The panel parses compose.yaml client-side and surfaces services, ports, volumes, restart policy, env file with missing-variable detection, network, and git/local source in a compact, read-only format. An inline banner surfaces pending image updates with risk classification (patch/minor/major) and an apply button gated on edit permissions. Compose editing remains one click away: the anatomy header exposes an "edit compose.yaml" toggle that slides the Monaco editor into the same right-column slot with the full tabs, Git Source, Save, and Save & Deploy toolbar. Closing the editor discards unsaved changes and restores the anatomy view. The overall stack view is now a two-column grid: left column stacks the identity header, per-container health strip, and logs viewer; right column holds the anatomy panel or the Monaco editor. Missing-variable detection covers the full compose interpolation grammar, including defaulted (:- / -) and required (:? / ?) modifiers. * fix(stack-view): restore Git Source accessible name on anatomy source row The anatomy panel's source row is the primary Git Source control on the default stack view. Without an explicit accessible name, screen readers announced only the raw git ref or 'local', and role-based locators could not target it.	2026-04-19 01:13:33 -04:00
Anso	a65a1c0e86	feat(stack-view): per-container health strip and structured logs viewer (#689) ... * feat(stack-view): per-container health strip and structured logs viewer Replaces the flat container list with a per-container health strip showing healthcheck state, uptime, port mapping with an open-app link, and live cpu/memory/network sparklines fed by a 60-sample ring buffer on the stats WebSocket. Adds a structured logs viewer that parses docker timestamps (emitted by the -t flag on the logs stream) and classifies each line by level. Rows render as a DOM grid with filter pills (all / info / warn / err with count), following indicator, and plain-text download. A segmented toggle switches between the structured viewer and the original xterm view; the choice is persisted in localStorage. * fix(stack-view): disable no-control-regex for ANSI escape pattern ANSI escape sequences start with ESC (0x1B), which is a control character. The regex is intentional and cannot be rewritten without it.	2026-04-19 00:17:51 -04:00
Anso	82aabfe64c	feat(stack-view): identity header with health state and action hierarchy (#688) ... * feat(stack-view): identity header with health state and action hierarchy Redesign the stack view header around three questions: what is this, is it healthy, what does it do. Surface Docker healthcheck state, primary image tag, and image digest; group actions by frequency. - Backend: extend /api/stacks/:name/containers with healthStatus (healthy / unhealthy / starting / none), Image, and ImageID by inspecting each container in parallel. - Frontend: replace flat CardHeader with breadcrumb, italic serif title, colored state pill with pulse, and a mono image/digest line with a one-click copy button for the full digest. - Frontend: action hierarchy - primary cyan Restart/Start, outline Stop and Update, and an overflow menu for Rollback, Scan config, and Delete. - Docs: new Stack header section and updated controlling-a-running-stack tables showing primary/secondary/overflow grouping. * test(e2e): open overflow menu to reach stack Delete action Destructive actions now live under the stack toolbar overflow menu rather than as a flat top-level button, so the delete flow must click More actions before selecting the Delete menu item.	2026-04-18 23:38:56 -04:00
Anso	b2f341b43d	feat: docker run to compose converter (#623) ... * feat(convert): harden /api/convert endpoint with auth, validation, and tests Applies authMiddleware to the docker run to compose endpoint, validates that the payload is a non-empty string within an 8192 character budget, rejects inputs containing null bytes, and wraps composerize in a try/catch that surfaces a 422 with a clear message when the library cannot produce a services block. Adds a Vitest suite covering the auth gate, happy path, common flag coverage, boundary and null byte placement variants, and malformed command handling. * feat(editor): add From Docker Run tab to create stack dialog Introduces a third tab in the Create New Stack dialog that accepts a docker run command, calls the converter endpoint, and previews the returned compose YAML before writing it to a new stack directory. Uses the defensive toast pattern, clears the stale preview when the input changes, and rolls back the empty stack directory if saving the converted YAML fails so the user never ends up with an orphan stack. * docs(stack-management): document docker run to compose converter Adds a Convert from a docker run command section to the stack management page covering how to use the new tab, the list of supported flags, and troubleshooting for unparseable inputs. Screenshots show the empty tab, a successful conversion with the compose preview, the resulting stack in the editor, and the error toast surfaced when the input cannot be converted. Appends a matching entry to the troubleshooting page.	2026-04-15 20:23:12 -04:00
Anso	f516275834	refactor(licensing): replace Pro branding with Community/Skipper/Admiral tiers (#375) ... Eliminate all references to "Pro" across backend, frontend, and docs. Internal tier value renamed from 'pro' to 'paid'; user-facing text now uses the thematic tier names (Community, Skipper, Admiral). - Rename LicenseTier 'pro' to 'paid' in backend and frontend types - Rename requirePro guard to requirePaid, error code PRO_REQUIRED to PAID_REQUIRED - Rename ProGate.tsx to PaidGate.tsx with updated copy - Fix: trial users can now see upgrade/purchase cards in Settings - Update all docs and openapi.yaml to use correct tier names	2026-04-05 05:59:36 -04:00
Anso	a1804c8fbe	docs: comprehensive review and refresh of all documentation (#374) ... * docs: comprehensive review and refresh of all documentation pages Reviewed every doc page against the current app state after the v0.38 dashboard redesign. Updated content, fixed inaccuracies, and refreshed all screenshots at 1920x1080. Pages updated: - introduction: expanded feature list to 25 items across 6 subsections - quickstart: fixed docker run command (Docker Hub, auto JWT, COMPOSE_DIR) - configuration: replaced personal paths with generic /home/user/docker - sso-quickstart: fixed Settings navigation reference - sso: added SSO_LDAP_DISPLAY_NAME env var - overview: added 8 missing feature sections (labels, API tokens, schedules, etc.) - dashboard: complete rewrite for new health bar, gauges, stack health table - stack-management: updated for UP/DN indicators, rollback button, split actions - editor: rewritten for two-column layout, inline stats, embedded terminal - resources: updated Quick Clean docs, added network topology and inspect - app-store: updated categories, deploy sheet details, permission gate, settings - openapi.yaml: fixed YAML parsing error on line 1831 Screenshots refreshed: 14 images across 6 feature areas. * docs: review and update observability, console, multi-node, and compatibility pages - Global Observability: fix log format fields, add download button docs, split display limits into memory buffer vs rendered rows, correct settings labels - Host Console: remove internal implementation details per security docs policy, add stack directory behavior, expand header bar docs, remove unverified scrollback claim - Multi-Node: add Compose Directory field, document connection test details panel, fix edit/delete node behavior, simplify token security section, remove internal details - Node Compatibility: add missing self-update capability, remove internal endpoint paths and cache TTL, move from Features to Reference group in navigation - Refresh all screenshots for the redesigned UI (7 images) * docs: review and refresh fleet, remote updates, labels, alerts, routing, and webhooks pages - Fleet View: added node updates modal, container detail, version/update/critical badges, Tags filter - Remote Updates: removed internal details, added capability cross-link, fast polling - Stack Labels: three creation methods, two assignment methods, 10 colors, bulk actions screenshot - Alerts & Notifications: fixed metric labels, added notification popover detail, status banner - Notification Routing: HTTPS requirement, rule card layout, channel terminology fix - Webhooks: corrected license tier to Admiral, matched action labels to UI, removed internal security details, added local-only note - Troubleshooting: centralized entries from remote-updates, stack-labels, notification-routing - Refreshed all screenshots at 1920x1080, removed 11 orphaned images * docs: review and refresh RBAC, user management, and atomic deployments pages - RBAC: added missing Auditor role (5th role), updated permission matrix, fixed license tier references, documented username/password validation rules, self-deletion protection - Atomic Deployments: added "Which operations are protected" section covering webhooks/schedules/app store, removed internal backup path, fixed license tier to Skipper/Admiral - Screenshots: cropped to dialog element per updated strategic cropping guideline, removed 2 orphaned images * docs: review and refresh fleet-wide backups and audit log pages Update fleet-backups page to reflect current inline create form, add scheduled snapshots section, document the detail view and restore dialog, expand RBAC table to all five roles. Update audit log page to document expanded row detail fields, pagination, refresh button, and data retention screenshot. Replace all screenshots with fresh captures at 1920x720. * docs: review and refresh API tokens and private registries pages - API Tokens: clarify Full Admin scope, add Managing tokens section with card details, document revocation confirmation dialog, add usage tracking to security model, refresh screenshot - Private Registries: add Managing registries section with card details and action buttons, document edit behavior, fix URL auto-fill description, remove encryption algorithm name per security policy, fix grammar, refresh both screenshots * docs: review and refresh auto-update policies, scheduled operations, and SSO pages - Auto-Update Policies: document all 8 table columns, expand action buttons, add "All Stacks" wildcard option, fix field labels, add CSV export and pagination details, refresh screenshots - Scheduled Operations: fix System Prune target description, add Task List table columns, restructure create dialog fields with action-specific annotations, rewrite execution history with column table, refresh screenshots - SSO: remove encryption algorithm name per security policy, add LDAP and OIDC configuration field tables, document provider card controls (Save, Test Connection, Remove, Active badge), refresh screenshots - Move SSO troubleshooting entries to centralized troubleshooting page * docs: review and refresh licensing & billing page Update upgrade card feature lists to match actual tier gating (Skipper: fleet view, webhooks, labels, atomic deployments, backups, auto-update policies; Admiral: scoped RBAC, SSO, audit log, host console, API tokens, private registries, scheduled operations). Add flex layout to align upgrade card buttons at the bottom. Replace stale screenshot with fresh community and active license captures. Add feature breakdown subsection and profile menu billing shortcut to docs. * docs: review and refresh settings reference and security advisories pages Settings Reference: add 5 missing sections (SSO, API Tokens, Registries, Labels, Routing), expand Users from 2 to 5 roles, fix System Limits and Developer field labels to match UI, restructure Developer into Streaming and Data Retention sub-tables, update App Store and Support sections, refresh overview screenshot. Security Advisories: restructure into versioned sections (v0.25.x hardening and v0.19-v0.24 CVE remediation), expand from 3 bullet points to 10 specific improvements, fix GitHub URL from SaelixCode to AnsoCode, redact internal details per security docs policy. Remove "Sencho Pro" product name from all three pages, replaced with tier names (Community, Skipper, Admiral). * docs: review and refresh troubleshooting page, remove architecture and development guides - Rewrote forgotten password section to remove exposed SQL and table names - Updated all Settings navigation paths to Profile > Settings > X - Fixed network topology from "tab" to "view mode", added Pro license note - Updated Prune Networks to current "Prune Dead Networks" label - Corrected update check cooldown from vague to 2 minutes - Consolidated two network creation error sections into one - Removed hardcoded version reference (v0.34.0) - Replaced em dashes throughout - Deleted architecture.mdx (exposes internal implementation details) - Deleted development.mdx (contributor guide belongs in repo, not public docs) - Removed both pages from docs.json navigation * docs: review and refresh operations pages (backup, upgrade, self-hosting, troubleshooting) Backup & Restore: - Added missing encryption.key to all backup/restore procedures - Added Warning about restoring db without matching encryption key - Added cross-reference to Fleet-Wide Backups for paid tiers - Removed false claim about no built-in backup scheduler - Updated cron example to include encryption key copy Upgrading Sencho: - Removed internal migration details (table names, column specs, encryption algorithm) - Replaced with high-level migration summary per security docs policy - Added encryption.key to pre-upgrade backup command - Updated version pinning example from 0.25.3 to 0.38.0 - Added Remote Updates cross-reference for Skipper/Admiral users Self-Hosting Best Practices: - Removed JWT_SECRET from env var table (auto-generated, not an env var) - Removed PORT from env var table (hardcoded to 3000, not configurable) - Added API_RATE_LIMIT to env var table (actually exists in code) - Fixed listen port description from "configurable" to "fixed" - Updated resource recommendations based on measured footprint audit - Removed su-exec reference (internal implementation detail) - Upgraded data directory Note to Warning with file names Troubleshooting: - Fixed "Pro features" heading to "Paid features" with correct tier names	2026-04-04 21:32:51 -04:00
Anso	55d3b8ca1d	feat(stacks): state-aware sidebar context menu and Open App action (#368) ... * feat(stacks): state-aware sidebar context menu and Open App action - Context menu now adapts to stack state: running stacks show Stop/Restart/Update, stopped stacks show Deploy only - Added "Open App" shortcut to open a stack's web UI directly from the sidebar (visible when running with a published port) - Backend bulk status endpoint enriched with mainPort detection - Reduced manual image update check cooldown from 10 to 2 minutes - Rate limit error message now derives from the configured constant * fix(stacks): use const for bulkPorts (prefer-const lint)	2026-04-03 21:41:01 -04:00
Anso	6f7415351f	feat(stack-management): add scan stacks folder button (#332) ... * feat(stack-management): add scan stacks folder button to detect manually-placed compose files Users who place Docker Compose files directly into the stacks directory (via SCP, file manager, etc.) can now click the folder-search icon next to "Create Stack" to immediately discover and surface those stacks in the sidebar without a full page reload. * docs(troubleshooting): add scan stacks folder troubleshooting section Covers common issues: compose file not in subdirectory, unrecognized filenames, empty directories, and already-tracked stacks.	2026-04-02 12:17:19 -04:00
Anso	116f15dae9	fix(stacks): resolve permission denied error on stack deletion (#261) ... * fix(stacks): resolve permission denied error when deleting stacks with root-owned files When Docker Compose creates files as root inside a stack directory, the non-root Sencho process cannot remove them. This adds a Docker-based fallback: if fsPromises.rm fails with EACCES/EPERM, Sencho spawns a short-lived Alpine container to clean up the root-owned files. Also enhances docker compose down with --volumes --remove-orphans to let Docker clean up its own resources before filesystem deletion. * docs: clarify that pre-existing root-owned stacks can be deleted * fix(stacks): include Docker stderr in fallback deletion error message Fixes CI lint failure: 'stderr' was assigned but never read in forceDeleteViaDocker(). Now surfaces Docker stderr output in the error message when the fallback cleanup fails.	2026-03-29 21:32:05 -04:00
Anso	31e1795af0	feat(scheduled-ops): add scheduled operations for Team Pro users (#231) ... Adds the ability to schedule recurring Docker operations (stack restarts, fleet snapshots, system prunes) via cron expressions with full execution history logging. Includes Run Now for on-demand execution.	2026-03-28 23:56:37 -04:00
Anso	dda1671e5a	feat: stack context menu, tier icons, centered logo & support (#194) ... * chore: remove CLAUDE.md and MANUAL_STEPS.md from git tracking These files contain internal project instructions that should not be public. Both are now in .gitignore to prevent re-tracking. * chore: remove build output and generated files from git tracking Remove backend/public/ (frontend build artifacts) and backend/cookies.txt from tracking. Add demo-video/ and website/ to .gitignore. * docs: align mintlify theme with website and app branding Update colors to brand cyan, add Geist font, dark mode default, gradient background, navbar with GitHub link and CTA, and footer matching the website structure. * chore: add shadcn MCP server configuration * feat: add stack context menu, tier icons, centered logo, and support section - Add right-click context menu on sidebar stacks with full actions (alerts, check updates, deploy, stop, restart, update, delete) - Mirror same actions in the three-dot dropdown menu - Create TierBadge component with Globe/Crown/Users icons for Community/Pro/Team tiers, replacing ProBadge across the app - Center logo and app name in sidebar header - Add tiered Support section in Settings with docs, GitHub issues, and tier-appropriate email support channels - Remove duplicate links from About section * docs: update changelog and stack management docs for context menu	2026-03-27 17:10:47 -04:00
Anso	32a7d53b2b	feat: RBAC, atomic deployments, fleet backups, and licensing (Pro) (#185) ... * feat: add RBAC viewer accounts, atomic deployments, and fleet-wide backups (Pro) Introduces three Pro-tier features: - RBAC: Multi-user system with admin/viewer roles, user management UI, automatic migration from single-admin credentials, viewer restrictions across the entire UI (read-only editor, hidden action buttons) - Atomic Deployments: Pre-deploy file backup to .sencho-backup/, automatic rollback on health probe failure, manual rollback button, health probes added to stack updates, webhook-triggered deploys use atomic rollback - Fleet-Wide Backups: Point-in-time snapshots of compose files across all nodes (local + remote), stored centrally in SQLite, per-stack restore with optional redeploy, graceful handling of offline nodes * fix(settings): use correct ProGate prop name in UsersSection * fix(settings): remove unused isPro prop from UsersSection * fix(auth): fetch user info after login and setup so isAdmin is set correctly * feat(pricing): revise pricing strategy and enforce variant-based seat limits Raise Personal Pro from $49/yr to $69/yr with 3 viewer seats (up from 1). Add $15/mo billing option for Team Pro. Mark lifetime pricing as a 90-day early-adopter offer. Store Lemon Squeezy variant_name on activation/validation and enforce seat limits server-side per variant. * feat(licensing): add Lemon Squeezy checkout, webhook, and billing portal integration Server-side checkout URL generation (POST /api/checkout) with admin email pre-fill and instance_id custom data. HMAC-SHA256 verified webhook endpoint (POST /api/webhooks/lemonsqueezy) handling order, subscription, and payment lifecycle events for automatic license activation. Customer billing portal link stored from webhook events and exposed via GET /api/billing/portal. In-app checkout buttons in Settings with manual license key fallback. * fix(licensing): exempt Lemon Squeezy webhook from auth middleware The catch-all auth middleware on /api/* was blocking the public webhook endpoint. Added /webhooks/lemonsqueezy to the exemption list alongside /auth/* and /webhooks/:id/trigger. * feat(pricing): update pricing to final live rates Personal Pro: $7.99/month, $69.99/year, $249 lifetime. Team Pro: $49.99/month, $499.99/year, $1,499 lifetime. Added personal_monthly checkout variant across backend, frontend, and website. * refactor(licensing): remove server-side checkout/webhook for self-hosted model Sencho is self-hosted — each user runs their own instance, so there is no central server to receive webhooks or hold the store API key. Replaced in-app checkout buttons with a "View Pricing" redirect to sencho.io and kept manual license key activation as the primary flow. - Delete LemonSqueezyService (checkout, webhook, HMAC verification) - Remove POST /api/checkout, GET /api/billing/portal, POST /api/webhooks/lemonsqueezy - Remove raw body parser and auth exemption for webhook route - Remove all LEMONSQUEEZY_* env vars from .env.example - Replace checkout buttons in SettingsModal with single "View Pricing" button - Simplify LicenseContext checkout to open sencho.io pricing page - Update licensing docs to reflect website-based purchase flow * chore: normalize em-dashes to hyphens across codebase (linter) * chore: remove accidentally tracked directories from index	2026-03-26 21:58:24 -04:00
SaelixCode	98910c4117	docs: bootstrap user-facing documentation from codebase audit ... - Add 5 new Tier 1 doc pages: configuration, stack-management, editor, multi-node, and alerts-notifications - Update introduction, quickstart, and features/overview to reflect current feature set and link to new pages - Restructure mint.json with Getting Started / Features / Reference / Operations navigation groups - Add Playwright-captured screenshots for all major UI screens	2026-03-22 22:39:06 -04:00