8 Commits

Author	SHA1	Message	Date
Anso	7ce045accb	feat: pre-deploy scan visibility and pinned scanner version (#1378) ... * feat: pre-deploy scan visibility and pinned scanner version Pin managed Trivy installs and add an opt-in pre-deploy scan advisory so a manual deploy can surface each image's latest scan before it runs. - Managed Trivy now installs a pinned, known-good version by default for reproducible installs. Auto-update still tracks the latest release, and an explicit update always pulls the latest. - Add an opt-in pre-deploy scan advisory: when enabled, deploying a stack from the editor first shows each image's latest cached scan severity for review. It is visibility only and never blocks; deploy enforcement is unchanged. - Backend: pre_deploy_scan_advisory setting, PUT /security/pre-deploy-scan-advisory, a cache-only GET /security/stacks/:name/pre-deploy-summary, and a node-scoped getLatestVulnScanByDigestForNode lookup. - Frontend: advisory toggle on the Security page scanner setup, and a PreDeployScanDialog wired into the editor deploy flow that fails open when the summary is unavailable. - Docs: scanner configuration, version pinning, and the advisory. * fix: harden pre-deploy advisory guard, toggle visibility, and installer busy state Addresses review findings on the pre-deploy advisory. - Block a second editor deploy during the async advisory window with a synchronous pending ref, cleared on cancel and in the deploy's finally, so a double-click can no longer start two deploys. - Keep the pre-deploy advisory toggle visible to admins whenever the setting is on, so it can still be turned off after the scanner becomes unavailable. - Resolve the managed Trivy version inside the install lock so the busy state and serialization cover the latest-version fetch and the managed-install check.	2026-06-16 00:42:33 -04:00
Anso	6cc66faa8c	feat(mobile): standardize secondary pages and the stack list on the status masthead (#1374) ... * feat(security): reflow the node Security page for mobile Below the md breakpoint the Security page now reads as a phone surface instead of a squeezed desktop, with no change to the desktop layout. - Masthead stat cluster moves into a full-width 3-cell strip (critical / high / last scan) below the tab strip, since the masthead hides its inline cluster on a phone. - The eight-section tab strip becomes a horizontally scrollable mono row with an edge mask-fade and a cyan underline on the active tab; every section stays reachable by scroll. - The six totals render as a 3x2 hairline-divided grid instead of the 640px-wide rail that forced a horizontal scroll. - The Images tab becomes a filterable, scrollable list (severity dot, truncated ref, freshness, critical/high count tags) with a chip row, in place of the desktop table. - A freshness footer band states scan recency and scanner version. All mobile treatment is gated by useIsMobile() or max-md: utilities, so the desktop view is byte-identical. Charts are reused full-width. * feat(security): make the mobile Security page a bespoke masthead-led screen On a phone the Security page now drops the global top bar and leads with its masthead (the notifications + more-menu cluster moves into the masthead's right slot), matching Home and Fleet so the mobile shell is continuous across pages. The view is reclassified bespoke and rendered through the masthead-led path; the desktop layout is unchanged. The mobile "more" menu now lists every destination instead of omitting the bottom-tab views, so the same menu opens the same set on every screen rather than changing contents from page to page. * refactor(mobile): extract shared PageHead, sub-tabs, and chip-row primitives Add PageHead (the header for a pushed full-screen secondary view), MobileSubTabs (the mono tab scroller with the cyan active underline), and MobileChipRow (the cyan-filled filter chips) to the shared mobile-ui kit, and rewire the Security page's tab strip and Images filter to consume them. No visual change; this is the shared chrome the remaining mobile pages reuse. * feat(updates): make the mobile Updates page a bespoke masthead-led screen Below the md breakpoint the Auto-Update Readiness page becomes a pushed full-screen view: a PageHead (back chip, the rehomed notifications + more-menu, a "fleet readiness" crumb, and a Recheck action) leads, then a brand-tinted readiness hero, per-node sections, and one-up readiness cards that reuse the same risk badge, version delta, and apply/disabled logic as the desktop board. The desktop layout is unchanged. Reclassifies auto-updates as bespoke and renders it through renderMobileBespoke behind the same hub-only + capability gates as the desktop content path. Also lifts the PageHead, sub-tabs, and chip-row primitives' right-slot to host the rehomed global chrome. * feat(app-store): make the mobile App Store a bespoke masthead-led screen Below the md breakpoint the App Store becomes a pushed full-screen view: a PageHead (back chip, the rehomed notifications + more-menu, and an app-count crumb) leads, the category sidebar collapses into a horizontal chip scroller, and the featured hero plus the tile grid (already single-column on a phone) stack below. The featured hero, tile grid, and deploy sheet are shared with the desktop layout, which is unchanged. Reclassifies templates as bespoke and renders it through renderMobileBespoke. Adds tests for the shared chip row and sub-tabs. * feat(audit): make the mobile Audit Log a bespoke masthead-led screen Below the md breakpoint the Audit Log becomes a pushed full-screen view: a PageHead (back chip, the rehomed notifications + more-menu, an entry-count crumb, and Refresh) leads, then the Stream/Table sub-tabs and the stream view, where the signal-rail tiles fold to a 2x2 grid and the day-banded activity stream reflows. The columnar table reads best on a larger screen, so the Table tab points there on a phone. Desktop is unchanged. Reclassifies audit-log as bespoke behind the same hub-only + capability gates as the desktop content path. * feat(app-store): drop the featured hero and category chips on mobile On a phone the App Store is now search plus a single-column list of every matching app. The featured hero and the category chip row are removed; the would-be-featured app is folded into the list so nothing is dropped. Desktop keeps the featured hero, category sidebar, and grid. * feat(resources): make the mobile Resources page a bespoke masthead-led screen Below the md breakpoint Resources becomes a pushed full-screen view: a PageHead (back chip, the rehomed notifications + more-menu, a docker crumb) leads, then the reclaim hero, the disk-footprint segments, the 2x2 quick-clean grid, and the resource tabs. The raw resource tables scroll horizontally to fit; the detail sheets stay full-screen. The main content and the dialog/sheet overlays are shared with the desktop layout, which is unchanged. * chore(mobile): correct shared-primitive comments and dedupe the lazy fallback Fix the "shared by" consumer lists on the mobile-ui primitives, point the headerActions doc comments at the PageHead (not a masthead), drop the stale "all eight sections" count on the Security tab strip, rename a readiness-card test to match what it asserts, and extract a single Suspense fallback for the four bespoke phone-screen lazy imports. No behavior change. * feat(mobile): codify the fade+arrow tab scroller and fix the Resources tab clip Extract the horizontal tab scroller (edge fade + clickable chevron + wheel-to-horizontal) out of the stack anatomy panel into a shared ScrollableTabRow primitive, and adopt it in the stack anatomy tabs, the mobile sub-tabs (Security / Audit), and the Resources resource tabs. On a phone the Resources tabs now scroll horizontally, so the "Unmanaged" tab and its count no longer clip out of the frame. Desktop is unchanged. * feat(logs): make the mobile Logs page a bespoke masthead-led screen Below the md breakpoint the global Logs view drops the TopBar for a PageHead, hides the metrics rail, collapses the stream and level filters into a single Filters dropdown, turns the search into an icon that expands to an input, and folds the pause / clear / download controls into an expanding floating action button that retracts after each action. Desktop is unchanged. Reclassifies global-observability as bespoke behind the same hub-only gate as the desktop content path. * feat(mobile): standardize secondary pages on the status masthead Adopt the Home/Fleet/Security status masthead (cyan rail, kicker, serif- italic state word + tone dot, meta line, notifications + more-menu in the right slot) on every bespoke secondary page (Resources, App Store, Updates, Audit, Logs), replacing the title-led PageHead, which is removed. Each page derives a status word: Updates "Up to date" / "N pending", Logs Streaming / Idle / Offline, Audit Healthy / Review / Alerts, Resources Reclaimable / Tidy, App Store the app count. The "< Stacks" back chip is dropped (the bottom tab bar and more-menu own navigation), the page actions (Recheck, Refresh) move into the body, and the Updates readiness hero folds into the masthead. Also make the Resources tab tables scroll horizontally instead of clipping on the right. Desktop is unchanged. * feat(stacks): lead the mobile stack list with the status masthead On phones the stack list now opens with the shared status masthead instead of the global top bar plus an in-sidebar node row. The node switcher renders as a compact kicker chip in the masthead, the serif word summarizes stack health (down, updates, or all running), and notifications plus the more-menu sit in the right slot. This matches the Home, Fleet, and Security pages. The dropped top bar hosted global search, so the more-menu gains a Search item that opens the command palette. The masthead kicker now accepts either a styled kicker or a raw slot, enforced as a discriminated union so exactly one source is supplied. Desktop is unchanged: the new chrome is gated to the mobile shell and the sidebar rows hide via max-md only. * fix(stacks): only call the list "All running" when every stack is up The mobile stack masthead derived its health word from filterCounts, where up counts running stacks and down counts exited ones. Any other status, and the window before statuses load, counts as neither, so a list with no exited stacks but some not yet running fell through to "All running" even though it was not. Gate that label on up equal to all, and otherwise show the running count out of the total so the headline stays honest while statuses settle.	2026-06-14 22:21:46 -04:00
Anso	0066887cee	feat(security): reflow the node Security page for mobile (#1372) ... * feat(security): reflow the node Security page for mobile Below the md breakpoint the Security page now reads as a phone surface instead of a squeezed desktop, with no change to the desktop layout. - Masthead stat cluster moves into a full-width 3-cell strip (critical / high / last scan) below the tab strip, since the masthead hides its inline cluster on a phone. - The eight-section tab strip becomes a horizontally scrollable mono row with an edge mask-fade and a cyan underline on the active tab; every section stays reachable by scroll. - The six totals render as a 3x2 hairline-divided grid instead of the 640px-wide rail that forced a horizontal scroll. - The Images tab becomes a filterable, scrollable list (severity dot, truncated ref, freshness, critical/high count tags) with a chip row, in place of the desktop table. - A freshness footer band states scan recency and scanner version. All mobile treatment is gated by useIsMobile() or max-md: utilities, so the desktop view is byte-identical. Charts are reused full-width. * feat(security): make the mobile Security page a bespoke masthead-led screen On a phone the Security page now drops the global top bar and leads with its masthead (the notifications + more-menu cluster moves into the masthead's right slot), matching Home and Fleet so the mobile shell is continuous across pages. The view is reclassified bespoke and rendered through the masthead-led path; the desktop layout is unchanged. The mobile "more" menu now lists every destination instead of omitting the bottom-tab views, so the same menu opens the same set on every screen rather than changing contents from page to page.	2026-06-14 21:28:13 -04:00
Anso	3c116466d9	refactor: drop the advisory policy-packs section and the findings cursor tooltip (#1369) ... * refactor: drop the advisory policy-packs section and the findings cursor tooltip Two Security-page cleanups from review. - Remove the advisory policy-packs catalog from the Policies tab. It was information-only and disconnected from the scan_policies enforcement engine, so it read as duplicated. The tab now hosts only the enforcement manager, which is paid, so the Policies tab is hidden for Community (with a deep-link guard) and the Overview's enforcement hint is gated to match. The backend policy-packs catalog and route are kept as a dormant foundation. Delete the orphaned PolicyPacksTab component, its test, and the unused frontend pack types. - Drop the cursor-follow tooltip from the findings severity badge (Secrets and Compose risks), matching the Images table. - Clarify that Compose risks is a Trivy security-misconfig audit, distinct from Compose Doctor's deploy-readiness preflight, in the tab copy and the docs. * chore: re-run CI	2026-06-12 23:24:32 -04:00
Anso	ef5a3f00a7	feat: add an on-demand node-wide security scan with live progress (#1367) ... Add a "Scan this node" action on the Security overview that scans, in one pass, any combination of three types: image vulnerabilities, image secrets, and compose misconfigurations. Progress streams live into the deploy-feedback modal. - TrivyService.scanNode runs the selected scanners across the node's images and, for misconfig, every stack's compose file, behind a per-node lock and tolerant of per-item failures. The existing scanAllNodeImages becomes a thin vuln-only wrapper over the shared image loop, so scheduled scans are unchanged. - POST /api/security/scan-node (admin, scanner-gated) streams sanitized progress to the deploy terminal and returns a combined summary. Secret scans stream counts only, never matched values. - Frontend adds a "scan" action verb and a ScanNodeLauncher wired into the overview; the scan stays bound to the node it started on even if the active node changes mid-run.	2026-06-12 19:07:45 -04:00
Anso	6cbab661a0	feat: match the Security masthead to the primary-page hero and make History search realtime (#1365) ... - Masthead: add `size` and `subtitle` to PageMasthead and render the Security masthead at the hero title size with a one-line posture summary, so its height and weight match the Home and Fleet mastheads. The compact size with no subtitle stays the default, so Settings, Console, and Logs are unchanged. - History search now applies as you type (a short debounce, no Enter press), matching the Fleet overview search. It stays server-side so the query searches every completed scan, not just the loaded page.	2026-06-12 18:21:37 -04:00
Anso	3d39d856a3	feat: chart-led Security overview with sortable Images and History tables (#1364) ... * feat: chart-led Security overview with sortable Images and History tables Refine the Security page around the existing design system and add the data the dashboard needs. - Overview leads with four charts (30-day risk trend, severity donut, top exposed images, findings by type); the signal-rail counts become a secondary summary, and the scanner and deploy-enforcement posture follow. - Images becomes a recessed table with search, a severity filter, sortable columns, a last-scan column, and inline scan actions; the findings cell is clickable into the scan sheet, and the per-row cursor tooltip is dropped where the columns already carry that information. - Policies puts deploy-enforcement first, collapses the policy packs into an accordion, and uses the standard primary button for Add policy. - Suppressions and acknowledgements move their titles and Add buttons outside the cards, matching the Fleet tab layout. - History switches from the detail sheet to an inline table (search, sortable columns, two-scan compare, pagination); the now-unreachable scan-history overlay is removed. - Add GET /api/security/overview/trend, a node-scoped daily critical/high rollup backing the risk-trend chart. - Extract the shared image-scan hook and the severity classifier, and harden the overview data fetch so a malformed non-critical response can never read as a clean security state. * fix: treat malformed Security responses as errors, not empty or clean states Address an independent review of the data-fetch paths so a 200 with an unexpected shape can never read as a benign "no findings" view. - SecurityView: validate that the image-summaries body is a scan-summary map; an unexpected shape now sets the error state instead of an empty map. Isolate the trend fetch in its own self-catching promise so a transport failure on the non-critical chart can no longer poison the overview or summaries error state. - useImageScan: only a "completed" poll counts as success (a malformed or unknown status now throws), and a failed post-scan summaries refresh is logged instead of silently dropped. - HistoryTab: a 200 whose body lacks an items array is treated as an error, not an empty "no completed scans" list.	2026-06-12 14:35:03 -04:00
Anso	2a4955f56d	feat: add dedicated Security page and policy-pack foundation (#1362) ... * feat: add dedicated Security page and policy-pack foundation Bring vulnerability scanning, scan history, suppressions, Compose risks, secrets, policy packs, and scanner setup into one node-scoped Security command center instead of scattering them across Resources and Settings. - New top-level Security view with Overview, Images, Compose risks, Secrets, Policies, Suppressions, History, and Scanner setup tabs (status masthead + signal rail; controlled tabs with deep-link support). - Backend: GET /security/overview rollup and GET /security/policy-packs static catalog (auth-only, Community). DatabaseService gains an uncapped scan-status count and a node-eligible block-policy count, and getImageScanSummaries now projects secret and misconfig counts. - Reuse existing surfaces: the scan-history sheet, the control-governed suppression and acknowledgement panels, and the scan-detail sheet (now with an initial-tab prop so it opens on the matching finding type). - Extract a shared SeverityBadge (from Resources) and a TrivyManager (from Settings) so both surfaces render identical controls. - Resources "Scan history" now links into the Security page History tab. - Docs for the new Security surface and tests for the new endpoints, helpers, nav wiring, and tabs. * refactor: consolidate scanner and policy management onto the Security page Remove the Settings "Vulnerability Scanning" section now that the Security page covers the same ground, with every option preserved: - Scanner install / update / uninstall / auto-update live on the Scanner setup tab (TrivyManager). - Scan policies, the honor-suppressions toggle, and the replica managed-by-control / demote controls move into a new ScanPolicyManager on the Policies tab (paid; Community sees only the policy-pack catalog). - CVE suppressions and acknowledgements remain on the Suppressions tab. Wiring removed: the registry section and the now-empty Security settings group, the SectionId, the SettingsSectionContent case and the isPaid prop it was the sole consumer of, and SecuritySection itself. The dashboard configuration-status "Vulnerability scanning" row now navigates to the Security page Policies tab. Docs that pointed at "Settings -> Security -> Vulnerability Scanning" are swept to the relevant Security page tabs. * fix: harden Security page scanner refresh, policy-load errors, and secret-only badges Address independent-review findings on the Security page: - Scanner setup now refreshes Trivy state when the active node changes, so the displayed scanner status matches the node TrivyManager's actions target (both follow x-node-id). Previously, switching nodes on the tab left stale state. - ScanPolicyManager surfaces an explicit error state on a failed policy fetch instead of falling through to a false "No scan policies configured". - The shared SeverityBadge and the Images findings column no longer label a scan "clean" when it has secrets or misconfigurations but no CVE severity (highest_severity is derived from vulnerabilities only); they show a "Findings" state and the secret/misconfig counts instead. - The Overview enforcement note points to the Policies tab, not the removed Settings section. - The History tab auto-opens the scan-history sheet only on a deep-link (mount with the History tab active), not on every manual tab selection. Adds tests for the badge secret/misconfig state and the policy-load error state.	2026-06-12 10:41:39 -04:00