rustfs/docs/operations/drive-timeout-tuning.md

Drive Timeout Tuning

This document describes the per-operation drive timeout knobs and the drive-timeout profile. It is written for operators running RustFS on slow or high-latency storage (HDD-class disks, network block devices, throttled containers) who see ListObjects/ListObjectsV2 requests fail on large prefixes, or who want to widen drive liveness budgets before a walk on a healthy-but-slow disk is treated as a stall.

If you are debugging a listing that returns fewer keys than the bucket holds, read Listing truncation and the walk stall budget first — that is the case this document exists for.

Background: what these timeouts bound

Every foreground drive operation carries a liveness budget so a hung disk fails fast instead of parking the request forever. The budget answers "is the drive still answering", not "how much total work is there" — a healthy disk that is merely busy keeps making progress and is not timed out.

The most important of these for listings is the walk stall budget. A directory walk (the filesystem enumeration behind every ListObjects) bounds each individual filesystem call — readdir, stat, xl.meta read — by the stall budget. A call that stops answering for longer than the budget fails with a drive timeout; time the walk spends blocked on a slow consumer (a client draining the listing slowly) does not count against it.

Configuration and precedence

Each knob is resolved in this order, highest priority first:

1. Its explicit per-operation environment variable (RUSTFS_DRIVE_*_TIMEOUT_SECS).
2. The legacy global fallback RUSTFS_DRIVE_MAX_TIMEOUT_DURATION (deprecated; applies to every per-operation knob that has no explicit override).
3. The drive-timeout profile default (see below).
4. The built-in default.

Values are whole seconds. Changes take effect on process restart.

Drive-timeout profile

RUSTFS_DRIVE_TIMEOUT_PROFILE selects a preset that raises several defaults at once, so slow-storage deployments do not have to set each knob individually:

Value	Effect
default	Built-in defaults (see the table below).
high_latency	Raises the default for every profile-aware knob to 60s.

Explicit per-operation overrides always win over the profile, so you can select high_latency and still pin one knob to a specific value.

Knobs

Environment variable	Default	high_latency default	Bounds
RUSTFS_DRIVE_WALKDIR_STALL_TIMEOUT_SECS	5	60	Max time a single walk filesystem call may go without answering during a listing walk. The knob for listing failures on large prefixes.
RUSTFS_DRIVE_WALKDIR_TIMEOUT_SECS	5	60	Total wall-clock timeout for a walk_dir. Retained for non-foreground callers; the foreground listing path no longer uses it (see below).
RUSTFS_DRIVE_LIST_DIR_TIMEOUT_SECS	5	60	Timeout for a standalone list_dir metadata listing.
RUSTFS_DRIVE_METADATA_TIMEOUT_SECS	5	60	Timeout for metadata reads such as read_metadata.
RUSTFS_DRIVE_DISK_INFO_TIMEOUT_SECS	5	60	Timeout for disk_info() calls.
RUSTFS_OBJECT_DISK_READ_TIMEOUT	10	60	Per-read stall budget while streaming an object body from disk.
RUSTFS_DRIVE_MAX_TIMEOUT_DURATION	30	—	Deprecated global fallback for every per-operation knob without an explicit override. Prefer the per-operation knobs.

The health-transition and probe knobs (RUSTFS_DRIVE_TIMEOUT_HEALTH_ACTION, RUSTFS_DRIVE_ACTIVE_CHECK_*, RUSTFS_DRIVE_SUSPECT_FAILURE_THRESHOLD, and the returning/offline classification knobs) govern how a timeout maps to drive health state. They are out of scope here; see crates/config/src/constants/drive.rs for the full list and defaults.

Listing truncation and the walk stall budget

Symptom

ListObjects/ListObjectsV2 on a large prefix either:

• returns 500 InternalError with Io error: timeout; or
• (on older builds) returns HTTP 200 with IsTruncated=false after fewer keys than the bucket actually holds — a silent truncation that S3 clients (mc, minio-go, SDK pagination loops) cannot detect, because IsTruncated=false is the protocol's only end-of-listing signal.

Every "missing" object remains readable by exact key via GetObject / StatObject; only the listing is affected.

Why it happens

A listing walk is bounded by the stall budget. Because a whole-directory enumeration (list_dir reading every immediate child in one pass) is bounded by that budget as a single unit, a very wide flat directory — one prefix holding hundreds of thousands or millions of immediate children — can make a single readdir exceed the budget on a perfectly healthy disk, especially on HDD-class or throttled storage. That trips a drive timeout, which the listing path escalates and surfaces to the client.

The silent variant is fixed; the loud 500 is tuned away

As of the walk-stall rework (merged to main, first released in 1.0.0-beta.9):

• The silent variant is eliminated. A walk that dies mid-stream can no longer be consumed as a clean end-of-listing. Once a walk has streamed any entries and then stalls, the failure is recorded as a hard drive timeout and escalated on that erasure set, so the client always sees an error — never a well-formed short page. This is locked by the list_path_raw_returns_timeout_when_producer_fails_after_partial_entry regression test in crates/ecstore/src/cache_value/metacache_set.rs.
• The remaining 500 is an operator-tunable, not a data-integrity bug. A genuinely wide flat directory can still exhaust the default 5s stall budget on slow storage and fail the listing loudly. The supported mitigation is to widen the budget.

Mitigation

Raise the walk stall budget, or select the high-latency profile:

# widen just the listing walk budget
-e RUSTFS_DRIVE_WALKDIR_STALL_TIMEOUT_SECS=60

# or raise every profile-aware drive default at once
-e RUSTFS_DRIVE_TIMEOUT_PROFILE=high_latency

Note: on releases at or before 1.0.0-beta.8, the foreground listing path was bounded by the total wall-clock knob RUSTFS_DRIVE_WALKDIR_TIMEOUT_SECS instead of the stall budget. If you cannot upgrade, raise that knob — but upgrading to 1.0.0-beta.9 or later is strongly preferred, because only the newer builds convert the silent truncation into a detectable error.

The most durable fix for pathologically wide directories is to shard keys under additional prefix levels so no single directory holds an enormous flat child set; the stall budget then never has to bound one giant readdir.

Diagnosing

Server logs at the failure show the walk timeout escalating through the listing pipeline:

WARN  Metacache reader peek timed out            state=peek_timed_out  drive=<endpoint>
ERROR Metacache listing quorum failed            state=quorum_failed

The rustfs_list_path_raw_stall_total counter (labelled by drive) increments on every walk stall, and gives you a per-drive signal that a budget is being hit before any client-visible failure. Watch it after tuning to confirm the stalls have stopped.