rustfs/docs/operations/scanner-runtime-controls.md

Scanner Runtime Controls

This document describes the runtime controls and status fields for the RustFS data scanner. It is written for operators who need to reduce scanner pressure, diagnose slow scan progress, or confirm that background lifecycle, replication, heal, bitrot, and usage work is still moving.

What the scanner does

The scanner is the background maintenance loop that walks stored objects and feeds several subsystems:

• usage accounting and data usage cache updates;
• lifecycle expiry and transition admission;
• bucket replication repair admission;
• scanner-originated heal and bitrot checks;
• namespace alerts for excessive versions, retained version size, and folder fan-out.

Slowing the scanner can reduce idle CPU and disk pressure, but it also delays the maintenance work above. Prefer using the status fields below before changing cycle or pacing values.

Configuration Sources

Scanner runtime config is resolved in this order:

1. Environment variables.
2. Persisted admin config for the scanner subsystem.
3. Built-in defaults or speed preset-derived values.

Bitrot cycle resolution is slightly different because the canonical persistent key belongs to the heal subsystem:

1. RUSTFS_SCANNER_BITROT_CYCLE_SECS.
2. heal.bitrot_cycle.
3. Legacy compatibility key scanner.bitrot_cycle.
4. Built-in default.

The /v3/scanner/status response reports each effective runtime value with a source of env, config, scanner_compat_config, or default.

Runtime Controls

Persistent key	Environment variable	Unit	Default	Effect
scanner.speed	RUSTFS_SCANNER_SPEED	preset	default	Selects the base pacing preset: fastest, fast, default, slow, or slowest.
scanner.delay	RUSTFS_SCANNER_DELAY	factor	preset-derived	Overrides the sleep multiplier. Valid range is 0 through 10000.
scanner.max_wait	RUSTFS_SCANNER_MAX_WAIT_SECS	seconds	preset-derived	Caps one scanner sleep.
scanner.cycle	RUSTFS_SCANNER_CYCLE	seconds	preset-derived	Sets the interval between scanner cycles.
scanner.start_delay	RUSTFS_SCANNER_START_DELAY_SECS	seconds	unset	Sets startup delay and, for compatibility, the cycle interval when scanner.cycle is unset.
scanner.cycle_max_duration	RUSTFS_SCANNER_CYCLE_MAX_DURATION_SECS	seconds	0	Caps one cycle's runtime. 0 disables this budget.
scanner.cycle_max_objects	RUSTFS_SCANNER_CYCLE_MAX_OBJECTS	objects	0	Caps objects processed by one cycle. 0 disables this budget.
scanner.cycle_max_directories	RUSTFS_SCANNER_CYCLE_MAX_DIRECTORIES	directories	0	Caps directories entered by one cycle. 0 disables this budget.
heal.bitrot_cycle	RUSTFS_SCANNER_BITROT_CYCLE_SECS	seconds	2592000	Controls periodic deep bitrot scans. false, off, no, or disabled disables periodic deep scans; 0, true, on, or yes runs deep mode every scanner cycle.
scanner.idle_mode	RUSTFS_SCANNER_IDLE_MODE	boolean	true	Enables scanner sleeps and cooperative throttling.
scanner.cache_save_timeout	RUSTFS_SCANNER_CACHE_SAVE_TIMEOUT_SECS	seconds	30	Timeout for saving scanner cache; runtime enforces a minimum of 1.
scanner.max_concurrent_set_scans	RUSTFS_SCANNER_MAX_CONCURRENT_SET_SCANS	count	0	Caps concurrent set-level scanner tasks. 0 keeps topology-derived concurrency.
scanner.max_concurrent_disk_scans	RUSTFS_SCANNER_MAX_CONCURRENT_DISK_SCANS	count	0	Caps concurrent disk bucket walks per set. 0 keeps disk-count-derived concurrency.
scanner.yield_every_n_objects	RUSTFS_SCANNER_YIELD_EVERY_N_OBJECTS	objects	128	Controls how often object loops yield to the async runtime. 0 disables this extra yield.
scanner.alert_excess_versions	RUSTFS_SCANNER_ALERT_EXCESS_VERSIONS	versions	100	Version count threshold for scanner alerts.
scanner.alert_excess_version_size	RUSTFS_SCANNER_ALERT_EXCESS_VERSION_SIZE	bytes	1099511627776	Retained version byte threshold for scanner alerts.
scanner.alert_excess_folders	RUSTFS_SCANNER_ALERT_EXCESS_FOLDERS	folders	65538	Direct subfolder threshold for scanner alerts.

The fastest, fast, default, slow, and slowest presets set the base sleep multiplier, maximum wait, and cycle interval. Use scanner.delay, scanner.max_wait, and scanner.cycle when the preset is close but one axis needs a precise override.

Status Endpoint

The scanner status route is:

GET /v3/scanner/status

The request must be authenticated with an admin identity that has ServerInfoAdminAction. The JSON response has two top-level objects:

• runtime_config: the effective runtime controls and their value sources.
• metrics: scanner work, pressure, checkpoint, lifecycle, replication, heal, bitrot, and alert counters.

Example fields to inspect:

runtime_config.speed.value
runtime_config.delay.value
runtime_config.max_wait_seconds.value
runtime_config.cycle_interval_seconds.value
runtime_config.bitrot_cycle_seconds.value
metrics.pacing_pressure.primary_pressure
metrics.pacing_pressure.last_cycle_budget_limited
metrics.lifecycle_transition.current_queued
metrics.lifecycle_transition.scanner_missed
metrics.source_work
metrics.scan_checkpoint

Reading Pacing Pressure

metrics.pacing_pressure.primary_pressure summarizes the highest-priority scanner pressure signal:

Value	Meaning	Usual response
queued_scans	Set or disk scan queues are backing up.	Lower scanner concurrency or increase pacing delay if user traffic is affected.
cycle_budget	The last cycle stopped because a runtime/object/directory budget was reached.	Check last_cycle_partial_reason and last_cycle_partial_source; increase the specific budget if scans need to finish sooner.
throttle_pause	Scanner sleeps or cooperative yields were observed.	Expected when idle_mode is enabled; inspect pause ratios before tuning.
active_scans	Scanner work is active but not currently queued or budget-limited.	Usually healthy; correlate with CPU/disk metrics.
none	No current scanner pressure was observed.	No scanner pacing action needed.

The ratio fields are fractions of the last cycle duration:

• last_cycle_throttle_sleep_ratio
• last_cycle_yield_ratio
• last_cycle_total_pause_ratio

If CPU is high but pause ratios are already high, increasing scanner.delay or scanner.max_wait may have limited value. Check active paths, source work, and disk activity before changing the cycle interval.

Reading Source Work

metrics.source_work, metrics.current_cycle_source_work, and metrics.last_cycle_source_work group scanner work by source:

• usage
• lifecycle
• bucket_replication
• site_replication
• heal
• bitrot
• alerts

Each source has checked, queued, executed, failed, skipped, and missed counters. missed means the scanner found work but could not admit it to the downstream queue. skipped means the work was intentionally merged or deduplicated.

Use these counters to decide whether scan progress is limited by scanner pacing or by a downstream subsystem such as lifecycle transition, replication repair, or heal admission.

Reading Lifecycle Transition Status

metrics.lifecycle_transition focuses on scanner-driven lifecycle transition work:

Field	Meaning
current_queue_capacity	Current transition queue capacity.
current_queued	Transition tasks currently queued.
current_active	Transition tasks currently being processed.
current_workers	Transition worker count.
queue_full	Queue-full observations in the transition state.
queue_send_timeout	Send timeouts for transition queue admission.
compensation_scheduled	Buckets scheduled for transition compensation.
compensation_running	Transition compensation tasks currently running.
scanner_queued	Scanner transition tasks admitted to the queue.
scanner_missed	Scanner transition tasks that could not be admitted.
completed	Transition worker completions.
failed	Transition worker failures.

When scanner_missed or queue_full rises, scanner lifecycle work is finding transition candidates faster than the transition queue can accept them. That is a downstream transition pressure signal, not just a scanner walk pressure signal.

Tuning Workflow

For symptoms where a mostly idle single-node, single-disk deployment has sustained CPU usage while the scanner is enabled:

1. Read /v3/scanner/status.
2. Check metrics.pacing_pressure.primary_pressure.
3. Check runtime_config.delay, runtime_config.max_wait_seconds, and runtime_config.cycle_interval_seconds to confirm the active values and their sources.
4. Check metrics.current_cycle_objects_scanned, metrics.current_cycle_directories_scanned, and active paths to confirm the scanner is the active work.
5. If primary_pressure is throttle_pause and pause ratios are low, raise scanner.delay first.
6. If individual sleeps are too short, raise scanner.max_wait.
7. If each scan cycle finishes but starts too often, raise scanner.cycle.
8. If scans must be broken into bounded chunks, set one of the cycle budgets: scanner.cycle_max_duration, scanner.cycle_max_objects, or scanner.cycle_max_directories.
9. Recheck pacing_pressure, source work, and lifecycle transition status after one or more scanner cycles.

Do not rely only on a longer cycle interval if lifecycle, replication, heal, or bitrot work must keep moving. Use source work and transition status to confirm that background maintenance is still making progress.

Helm

The Helm chart exposes the scanner environment variables under config.rustfs.scanner. Example:

config:
  rustfs:
    scanner:
      speed: "slow"
      delay: "30"
      max_wait_secs: "15"
      cycle_secs: "3600"
      cycle_max_duration_secs: "1800"
      cycle_max_objects: "1000000"
      cycle_max_directories: "100000"
      idle_mode: "true"
      yield_every_n_objects: "128"
      bitrot_cycle_secs: "2592000"

Use extraEnv for experimental or unrelated environment variables that are not represented by chart values.