// Copyright 2024 RustFS Team
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! Bucket Default Encryption Configuration Integration Tests
//!
//! This test suite verifies that bucket-level default encryption configuration is properly integrated with:
//! 1. put_object operations
//! 2. create_multipart_upload operations
//! 3. KMS service integration

use super::common::LocalKMSTestEnvironment;
use crate::common::{TEST_BUCKET, init_logging};
use aws_sdk_s3::types::{
    ServerSideEncryption, ServerSideEncryptionByDefault, ServerSideEncryptionConfiguration, ServerSideEncryptionRule,
};
use serial_test::serial;
use tracing::{debug, info, warn};

/// Test 1: When bucket is configured with default SSE-S3 encryption, put_object should automatically apply encryption
#[tokio::test]
#[serial]
async fn test_bucket_default_sse_s3_put_object() -> Result<(), Box<dyn std::error::Error + Send + Sync>> {
    init_logging();
    info!("Testing bucket default SSE-S3 encryption impact on put_object");

    let mut kms_env = LocalKMSTestEnvironment::new().await?;
    let _default_key_id = kms_env.start_rustfs_for_local_kms().await?;
    tokio::time::sleep(tokio::time::Duration::from_secs(3)).await;

    let s3_client = kms_env.base_env.create_s3_client();
    kms_env.base_env.create_test_bucket(TEST_BUCKET).await?;

    // Step 1: Set bucket default encryption to SSE-S3
    info!("Setting bucket default encryption configuration");
    let encryption_config = ServerSideEncryptionConfiguration::builder()
        .rules(
            ServerSideEncryptionRule::builder()
                .apply_server_side_encryption_by_default(
                    ServerSideEncryptionByDefault::builder()
                        .sse_algorithm(ServerSideEncryption::Aes256)
                        .build()
                        .unwrap(),
                )
                .build(),
        )
        .build()
        .unwrap();

    s3_client
        .put_bucket_encryption()
        .bucket(TEST_BUCKET)
        .server_side_encryption_configuration(encryption_config)
        .send()
        .await
        .expect("Failed to set bucket encryption");

    info!("Bucket default encryption configuration set successfully");

    // Verify bucket encryption configuration
    let get_encryption_response = s3_client
        .get_bucket_encryption()
        .bucket(TEST_BUCKET)
        .send()
        .await
        .expect("Failed to get bucket encryption");

    debug!(
        "Bucket encryption configuration: {:?}",
        get_encryption_response.server_side_encryption_configuration()
    );

    // Step 2: put_object without specifying encryption parameters should automatically use bucket default encryption
    info!("Uploading file (without specifying encryption parameters, should use bucket default encryption)");
    let test_data = b"test-bucket-default-sse-s3-data";
    let test_key = "test-bucket-default-sse-s3.txt";

    let put_response = s3_client
        .put_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .body(test_data.to_vec().into())
        // Note: No server_side_encryption specified here, should use bucket default
        .send()
        .await
        .expect("Failed to put object");

    debug!(
        "PUT response: ETag={:?}, SSE={:?}",
        put_response.e_tag(),
        put_response.server_side_encryption()
    );

    // Verify: Response should contain SSE-S3 encryption information
    assert_eq!(
        put_response.server_side_encryption(),
        Some(&ServerSideEncryption::Aes256),
        "put_object response should contain bucket default SSE-S3 encryption information"
    );

    // Step 3: Download file and verify encryption status
    info!("Downloading file and verifying encryption status");
    let get_response = s3_client
        .get_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .send()
        .await
        .expect("Failed to get object");

    debug!("GET response: SSE={:?}", get_response.server_side_encryption());

    // Verify: GET response should contain encryption information
    assert_eq!(
        get_response.server_side_encryption(),
        Some(&ServerSideEncryption::Aes256),
        "get_object response should contain SSE-S3 encryption information"
    );

    // Verify data integrity
    let downloaded_data = get_response
        .body
        .collect()
        .await
        .expect("Failed to collect body")
        .into_bytes();
    assert_eq!(&downloaded_data[..], test_data, "Downloaded data should match original data");

    // Step 4: Explicitly specifying encryption parameters should override bucket default
    info!("Uploading file (explicitly specifying no encryption, should override bucket default)");
    let _test_key_2 = "test-explicit-override.txt";
    // Note: This test might temporarily fail because current implementation might not support explicit override
    // But this is the target behavior we want to implement
    warn!("Test for explicitly overriding bucket default encryption is temporarily skipped, this is a feature to be implemented");

    // TODO: Add test for explicit override when implemented

    info!("Test passed: bucket default SSE-S3 encryption correctly applied to put_object");

    Ok(())
}

/// Test 2: When bucket is configured with default SSE-KMS encryption, put_object should automatically apply encryption and use the specified KMS key
#[tokio::test]
#[serial]
async fn test_bucket_default_sse_kms_put_object() -> Result<(), Box<dyn std::error::Error + Send + Sync>> {
    init_logging();
    info!("Testing bucket default SSE-KMS encryption impact on put_object");

    let mut kms_env = LocalKMSTestEnvironment::new().await?;
    let default_key_id = kms_env.start_rustfs_for_local_kms().await?;
    tokio::time::sleep(tokio::time::Duration::from_secs(3)).await;

    let s3_client = kms_env.base_env.create_s3_client();
    kms_env.base_env.create_test_bucket(TEST_BUCKET).await?;

    // Step 1: Set bucket default encryption to SSE-KMS with specified KMS key
    info!("Setting bucket default encryption configuration to SSE-KMS");
    let encryption_config = ServerSideEncryptionConfiguration::builder()
        .rules(
            ServerSideEncryptionRule::builder()
                .apply_server_side_encryption_by_default(
                    ServerSideEncryptionByDefault::builder()
                        .sse_algorithm(ServerSideEncryption::AwsKms)
                        .kms_master_key_id(&default_key_id)
                        .build()
                        .unwrap(),
                )
                .build(),
        )
        .build()
        .unwrap();

    s3_client
        .put_bucket_encryption()
        .bucket(TEST_BUCKET)
        .server_side_encryption_configuration(encryption_config)
        .send()
        .await
        .expect("Failed to set bucket SSE-KMS encryption");

    info!("Bucket default SSE-KMS encryption configuration set successfully");

    // Step 2: put_object without specifying encryption parameters should automatically use bucket default SSE-KMS
    info!("Uploading file (without specifying encryption parameters, should use bucket default SSE-KMS)");
    let test_data = b"test-bucket-default-sse-kms-data";
    let test_key = "test-bucket-default-sse-kms.txt";

    let put_response = s3_client
        .put_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .body(test_data.to_vec().into())
        // Note: No encryption parameters specified here, should use bucket default SSE-KMS
        .send()
        .await
        .expect("Failed to put object with bucket default SSE-KMS");

    debug!(
        "PUT response: ETag={:?}, SSE={:?}, KMS_Key={:?}",
        put_response.e_tag(),
        put_response.server_side_encryption(),
        put_response.ssekms_key_id()
    );

    // Verify: Response should contain SSE-KMS encryption information
    assert_eq!(
        put_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "put_object response should contain bucket default SSE-KMS encryption information"
    );

    assert_eq!(
        put_response.ssekms_key_id().unwrap(),
        &default_key_id,
        "put_object response should contain correct KMS key ID"
    );

    // Step 3: Download file and verify encryption status
    info!("Downloading file and verifying encryption status");
    let get_response = s3_client
        .get_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .send()
        .await
        .expect("Failed to get object");

    debug!(
        "GET response: SSE={:?}, KMS_Key={:?}",
        get_response.server_side_encryption(),
        get_response.ssekms_key_id()
    );

    // Verify: GET response should contain encryption information
    assert_eq!(
        get_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "get_object response should contain SSE-KMS encryption information"
    );

    assert_eq!(
        get_response.ssekms_key_id().unwrap(),
        &default_key_id,
        "get_object response should contain correct KMS key ID"
    );

    // Verify data integrity
    let downloaded_data = get_response
        .body
        .collect()
        .await
        .expect("Failed to collect body")
        .into_bytes();
    assert_eq!(&downloaded_data[..], test_data, "Downloaded data should match original data");

    // Cleanup is handled automatically when the test environment is dropped
    info!("Test passed: bucket default SSE-KMS encryption correctly applied to put_object");

    Ok(())
}

/// Test 3: When bucket is configured with default encryption, create_multipart_upload should inherit the configuration
#[tokio::test]
#[serial]
async fn test_bucket_default_encryption_multipart_upload() -> Result<(), Box<dyn std::error::Error + Send + Sync>> {
    init_logging();
    info!("Testing bucket default encryption impact on create_multipart_upload");

    let mut kms_env = LocalKMSTestEnvironment::new().await?;
    let default_key_id = kms_env.start_rustfs_for_local_kms().await?;
    tokio::time::sleep(tokio::time::Duration::from_secs(3)).await;

    let s3_client = kms_env.base_env.create_s3_client();
    kms_env.base_env.create_test_bucket(TEST_BUCKET).await?;

    // Step 1: Set bucket default encryption to SSE-KMS
    info!("Setting bucket default encryption configuration to SSE-KMS");
    let encryption_config = ServerSideEncryptionConfiguration::builder()
        .rules(
            ServerSideEncryptionRule::builder()
                .apply_server_side_encryption_by_default(
                    ServerSideEncryptionByDefault::builder()
                        .sse_algorithm(ServerSideEncryption::AwsKms)
                        .kms_master_key_id(&default_key_id)
                        .build()
                        .unwrap(),
                )
                .build(),
        )
        .build()
        .unwrap();

    s3_client
        .put_bucket_encryption()
        .bucket(TEST_BUCKET)
        .server_side_encryption_configuration(encryption_config)
        .send()
        .await
        .expect("Failed to set bucket encryption");

    // Step 2: Create multipart upload (without specifying encryption parameters)
    info!("Creating multipart upload (without specifying encryption parameters, should use bucket default configuration)");
    let test_key = "test-multipart-bucket-default.txt";

    let create_multipart_response = s3_client
        .create_multipart_upload()
        .bucket(TEST_BUCKET)
        .key(test_key)
        // Note: No encryption parameters specified here, should use bucket default configuration
        .send()
        .await
        .expect("Failed to create multipart upload");

    let upload_id = create_multipart_response.upload_id().unwrap();
    debug!(
        "CreateMultipartUpload response: UploadId={}, SSE={:?}, KMS_Key={:?}",
        upload_id,
        create_multipart_response.server_side_encryption(),
        create_multipart_response.ssekms_key_id()
    );

    // Verify: create_multipart_upload response should contain bucket default encryption configuration
    assert_eq!(
        create_multipart_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "create_multipart_upload response should contain bucket default SSE-KMS encryption information"
    );

    assert_eq!(
        create_multipart_response.ssekms_key_id().unwrap(),
        &default_key_id,
        "create_multipart_upload response should contain correct KMS key ID"
    );

    // Step 3: Upload a part and complete multipart upload
    info!("Uploading part and completing multipart upload");
    let test_data = b"test-multipart-bucket-default-encryption-data";

    // Upload part 1
    let upload_part_response = s3_client
        .upload_part()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .upload_id(upload_id)
        .part_number(1)
        .body(test_data.to_vec().into())
        .send()
        .await
        .expect("Failed to upload part");

    let etag = upload_part_response.e_tag().unwrap().to_string();

    // Complete multipart upload
    let completed_part = aws_sdk_s3::types::CompletedPart::builder()
        .part_number(1)
        .e_tag(&etag)
        .build();

    let complete_multipart_response = s3_client
        .complete_multipart_upload()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .upload_id(upload_id)
        .multipart_upload(
            aws_sdk_s3::types::CompletedMultipartUpload::builder()
                .parts(completed_part)
                .build(),
        )
        .send()
        .await
        .expect("Failed to complete multipart upload");

    debug!(
        "CompleteMultipartUpload response: ETag={:?}, SSE={:?}, KMS_Key={:?}",
        complete_multipart_response.e_tag(),
        complete_multipart_response.server_side_encryption(),
        complete_multipart_response.ssekms_key_id()
    );

    assert_eq!(
        complete_multipart_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "complete_multipart_upload response should contain SSE-KMS encryption information"
    );

    // Step 4: Download file and verify encryption status
    info!("Downloading file and verifying encryption status");
    let get_response = s3_client
        .get_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .send()
        .await
        .expect("Failed to get object");

    // Verify: Final object should be properly encrypted
    assert_eq!(
        get_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "Final object should contain SSE-KMS encryption information"
    );

    // Verify data integrity
    let downloaded_data = get_response
        .body
        .collect()
        .await
        .expect("Failed to collect body")
        .into_bytes();
    assert_eq!(&downloaded_data[..], test_data, "Downloaded data should match original data");

    // Cleanup is handled automatically when the test environment is dropped
    info!("Test passed: bucket default encryption correctly applied to multipart upload");

    Ok(())
}

/// Test 4: Explicitly specified encryption parameters in requests should override bucket default configuration
#[tokio::test]
#[serial]
async fn test_explicit_encryption_overrides_bucket_default() -> Result<(), Box<dyn std::error::Error + Send + Sync>> {
    init_logging();
    info!("Testing explicitly specified encryption parameters override bucket default configuration");

    let mut kms_env = LocalKMSTestEnvironment::new().await?;
    let default_key_id = kms_env.start_rustfs_for_local_kms().await?;
    tokio::time::sleep(tokio::time::Duration::from_secs(3)).await;

    let s3_client = kms_env.base_env.create_s3_client();
    kms_env.base_env.create_test_bucket(TEST_BUCKET).await?;

    // Step 1: Set bucket default encryption to SSE-S3
    info!("Setting bucket default encryption configuration to SSE-S3");
    let encryption_config = ServerSideEncryptionConfiguration::builder()
        .rules(
            ServerSideEncryptionRule::builder()
                .apply_server_side_encryption_by_default(
                    ServerSideEncryptionByDefault::builder()
                        .sse_algorithm(ServerSideEncryption::Aes256)
                        .build()
                        .unwrap(),
                )
                .build(),
        )
        .build()
        .unwrap();

    s3_client
        .put_bucket_encryption()
        .bucket(TEST_BUCKET)
        .server_side_encryption_configuration(encryption_config)
        .send()
        .await
        .expect("Failed to set bucket encryption");

    // Step 2: Explicitly specify SSE-KMS encryption (should override bucket default SSE-S3)
    info!("Uploading file (explicitly specifying SSE-KMS, should override bucket default SSE-S3)");
    let test_data = b"test-explicit-override-data";
    let test_key = "test-explicit-override.txt";

    let put_response = s3_client
        .put_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .body(test_data.to_vec().into())
        // Explicitly specify SSE-KMS, should override bucket default SSE-S3
        .server_side_encryption(ServerSideEncryption::AwsKms)
        .ssekms_key_id(&default_key_id)
        .send()
        .await
        .expect("Failed to put object with explicit SSE-KMS");

    debug!(
        "PUT response: SSE={:?}, KMS_Key={:?}",
        put_response.server_side_encryption(),
        put_response.ssekms_key_id()
    );

    // Verify: Should use explicitly specified SSE-KMS, not bucket default SSE-S3
    assert_eq!(
        put_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "Explicitly specified SSE-KMS should override bucket default SSE-S3"
    );

    assert_eq!(
        put_response.ssekms_key_id().unwrap(),
        &default_key_id,
        "Should use explicitly specified KMS key ID"
    );

    // Verify GET response
    let get_response = s3_client
        .get_object()
        .bucket(TEST_BUCKET)
        .key(test_key)
        .send()
        .await
        .expect("Failed to get object");

    assert_eq!(
        get_response.server_side_encryption(),
        Some(&ServerSideEncryption::AwsKms),
        "GET response should reflect the actually used SSE-KMS encryption"
    );

    // Cleanup is handled automatically when the test environment is dropped
    info!("Test passed: explicitly specified encryption parameters correctly override bucket default configuration");

    Ok(())
}

/// Test 5: Setting SSE-KMS without a specific key ID should auto-populate the
/// default KMS key ID so that GetBucketEncryption returns it (issue #3039).
#[tokio::test]
#[serial]
async fn test_sse_kms_without_key_id_populates_default() -> Result<(), Box<dyn std::error::Error + Send + Sync>> {
    init_logging();
    info!("Testing SSE-KMS without explicit key ID populates default key");

    let mut kms_env = LocalKMSTestEnvironment::new().await?;
    let default_key_id = kms_env.start_rustfs_for_local_kms().await?;
    tokio::time::sleep(tokio::time::Duration::from_secs(3)).await;

    let s3_client = kms_env.base_env.create_s3_client();
    kms_env.base_env.create_test_bucket(TEST_BUCKET).await?;

    // Set bucket encryption to SSE-KMS WITHOUT specifying a key ID
    info!("Setting bucket default encryption to SSE-KMS without key ID");
    let encryption_config = ServerSideEncryptionConfiguration::builder()
        .rules(
            ServerSideEncryptionRule::builder()
                .apply_server_side_encryption_by_default(
                    ServerSideEncryptionByDefault::builder()
                        .sse_algorithm(ServerSideEncryption::AwsKms)
                        .kms_master_key_id("")
                        .build()
                        .unwrap(),
                )
                .build(),
        )
        .build()
        .unwrap();

    s3_client
        .put_bucket_encryption()
        .bucket(TEST_BUCKET)
        .server_side_encryption_configuration(encryption_config)
        .send()
        .await
        .expect("Failed to set bucket SSE-KMS encryption without key ID");

    // GetBucketEncryption should return the default KMS key ID
    info!("Verifying GetBucketEncryption returns default KMS key ID");
    let get_response = s3_client
        .get_bucket_encryption()
        .bucket(TEST_BUCKET)
        .send()
        .await
        .expect("Failed to get bucket encryption");

    let config = get_response.server_side_encryption_configuration();
    let rule = config
        .and_then(|c| c.rules().first())
        .expect("Should have at least one encryption rule");
    let by_default = rule
        .apply_server_side_encryption_by_default()
        .expect("Should have ApplyServerSideEncryptionByDefault");

    assert_eq!(by_default.sse_algorithm(), &ServerSideEncryption::AwsKms, "Algorithm should be aws:kms");
    assert!(
        by_default.kms_master_key_id().is_some(),
        "KMS key ID should be populated with the default key (was None)"
    );
    assert_eq!(
        by_default.kms_master_key_id().unwrap(),
        &default_key_id,
        "KMS key ID should match the configured default key"
    );

    info!("Test passed: SSE-KMS without key ID correctly populates default key '{}'", default_key_id);
    Ok(())
}