fix(ci): integrate strict gate with E2E provenance

* fix(replication): close GA blockers from backlog#2366

Implements the P1 set from the pre-GA replication audit:

- Replication rule tag filters now require every And.Tag to match, replacing
  the s3s OR semantics with a local AND matcher that fails closed on a
  malformed tag.
- A replicated group membership change no longer writes the group status, so
  a membership update carrying the default Enabled status cannot silently
  re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
  peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
  carries its own ilm-expiry override, and no longer blocks a remove that
  drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
  node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
  follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
  support boundary section, and the Replication changelog section.

* fix(site-replication): resume only a locally driven endpoint refresh

The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.

Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.

* fix(site-replication): keep an explicit disabled group status on a snapshot

Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.

The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.

* fix(site-replication): schedule the import snapshot without recording a failure

`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.

Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.

* fix(admin): stop reporting replication failures as retries

`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.

* perf(site-replication): aggregate failure windows without cloning bucket stats

`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.

It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.

* fix(site-replication): reject a conflicting ilm-expiry override on a re-run

The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.

* fix(admin): do not fail a remote-target write on a peer reload error

set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.

* fix(site-replication): undo every bucket a cut-short refresh rewrote

When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.

* fix(site-replication): keep replay running while an endpoint refresh is pending

A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.

* test(e2e): cover the AND semantics of a two-tag replication filter

The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.

No new test function, so the nightly selection digest is unchanged.

* refactor(site-replication): fold the refresh state-change error into one constructor

The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.

* fix(site-replication): report a peer whose IAM snapshot waits for a repair

An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.

* docs(operations): state the group-status and escalation convergence limits

Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.

.config/e2e-full-selection.txt

@@ -1,2 +1,2 @@
-sha256-darwin=f0c78fdb93471575d9a64c5c46eae6c806bdd0bc10a6e33d7fb574aabd8db5a3
+sha256-darwin=845feb5859c4063c38307ada8f263f4039ebaf54c510bbc9177c4ab0dba2d8a9
-sha256-linux=03ed7016cab672de9320e31375a0358eceacb4408b0e79cf063614fa7c878b87
+sha256-linux=22320a04e541ef27cf1d0df3670ab3fafb62c57beef9a57eaff895e84a1e8380

.config/make/lint-fmt.mak

@@ -89,6 +89,7 @@ offline-enrollment-e2e-check: core-deps ## Build and exercise the dedicated offl
 test-wiring-check: ## Check tests stay registered and selected by their intended runners
 	@echo "🧪 Checking test wiring..."
 	$(RUSTFS_PYTHON_BIN) ./scripts/check_test_wiring.py
+	$(RUSTFS_PYTHON_BIN) ./scripts/ci_gate.py --check-workflow
 
 .PHONY: log-analyzer-rules-check
 log-analyzer-rules-check: core-deps ## Check log-analyzer rule anchors still exist verbatim in source

.config/make/tests.mak

@@ -39,6 +39,8 @@ script-tests: ## Run shell script tests
 	./scripts/test_python_bin.sh
 	./scripts/check_embedded_secrets.sh --self-test
 	$(RUSTFS_PYTHON_BIN) ./scripts/check_test_wiring.py --self-test
+	$(RUSTFS_PYTHON_BIN) ./scripts/test_e2e_binary.py
+	$(RUSTFS_PYTHON_BIN) ./scripts/ci_gate.py --self-test
 	$(RUSTFS_PYTHON_BIN) ./scripts/check_security_coverage.py --self-test
 	$(RUSTFS_PYTHON_BIN) ./scripts/check_scheduled_validation_freshness.py --self-test
 	$(RUSTFS_PYTHON_BIN) ./scripts/test_security_workflow.py

.github/actions/quick-checks/action.yml

@@ -111,10 +111,6 @@ runs:
       shell: bash
       run: ./scripts/check_no_planning_docs.sh
 
-    - name: Check CI paths stay in sync
-      shell: bash
-      run: ./scripts/check_ci_paths_sync.sh
-
     - name: Check io_uring lane --lib precondition
       shell: bash
       run: ./scripts/check_uring_lane_lib_only.sh

.github/workflows/ci-docs-only.yml

@@ -1,79 +0,0 @@
-# Copyright 2026 RustFS Team
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Reports the existing required checks for paths excluded by ci.yml.
-# Mixed PRs can trigger both workflows; their Quick Checks jobs use one shared
-# action to keep validation coverage aligned. Keep this paths list in sync with
-# ci.yml's pull_request.paths-ignore via scripts/check_ci_paths_sync.sh.
-
-name: Continuous Integration (docs only)
-
-on:
-  pull_request:
-    types: [ opened, synchronize, reopened ]
-    branches: [ main ]
-    paths:
-      - "**.md"
-      - "docs/**"
-      - "deploy/**"
-      - "scripts/dev_*.sh"
-      - "scripts/probe.sh"
-      - "LICENSE*"
-      - ".gitignore"
-      - ".dockerignore"
-      - "README*"
-      - "**/*.png"
-      - "**/*.jpg"
-      - "**/*.svg"
-      - ".github/workflows/build.yml"
-      - ".github/workflows/docker.yml"
-      - ".github/workflows/audit.yml"
-      - "flake.lock"
-
-permissions:
-  contents: read
-
-jobs:
-  quick-checks:
-    name: Quick Checks
-    runs-on: ubuntu-latest
-    timeout-minutes: 10
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7
-        with:
-          persist-credentials: false
-
-      - name: Run shared quick checks
-        uses: ./.github/actions/quick-checks
-
-  test-and-lint:
-    name: Test and Lint
-    runs-on: ubuntu-latest
-    timeout-minutes: 10
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7
-        with:
-          persist-credentials: false
-
-      # Docs-only PRs skip the full code CI, but they are exactly where a
-      # planning-type document could be slipped in (git add -f bypasses
-      # .gitignore). Run the guard here so the required "Test and Lint" check
-      # stays meaningful for docs-only changes.
-      - name: Check no planning docs committed
-        run: ./scripts/check_no_planning_docs.sh
-
-      - name: Satisfy required check for docs-only changes
-        run: echo "Docs-only change — code CI is skipped by paths-ignore; planning-docs guard passed, reporting success for the required 'Test and Lint' check."

.github/workflows/ci.yml

@@ -37,25 +37,6 @@ on:
   pull_request:
     types: [ opened, synchronize, reopened, closed ]
     branches: [ main ]
-    # Keep this list in sync with the `paths` list in ci-docs-only.yml, which
-    # reports the required "Test and Lint" check for PRs skipped here.
-    paths-ignore:
-      - "**.md"
-      - "docs/**"
-      - "deploy/**"
-      - "scripts/dev_*.sh"
-      - "scripts/probe.sh"
-      - "LICENSE*"
-      - ".gitignore"
-      - ".dockerignore"
-      - "README*"
-      - "**/*.png"
-      - "**/*.jpg"
-      - "**/*.svg"
-      - ".github/workflows/build.yml"
-      - ".github/workflows/docker.yml"
-      - ".github/workflows/audit.yml"
-      - "flake.lock"
   merge_group:
     types: [ checks_requested ]
   schedule:
@@ -88,6 +69,32 @@ jobs:
       - name: Explain cancellation run
         run: echo "PR closed; this run only cancels older runs in the same concurrency group."
 
+  classify-changes:
+    name: Select CI scope
+    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    outputs:
+      mode: ${{ steps.scope.outputs.mode }}
+    steps:
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7
+        with:
+          fetch-depth: 2
+          persist-credentials: false
+      - name: Select scope using the base revision's policy
+        id: scope
+        env:
+          CI_BASE_SHA: ${{ github.event.pull_request.base.sha }}
+        run: |
+          if [[ "$GITHUB_EVENT_NAME" != "pull_request" ]]; then
+            printf '%s\n' 'mode=full' >> "$GITHUB_OUTPUT"
+          elif [[ "$CI_BASE_SHA" =~ ^[0-9a-f]{40}$ ]] && git show "$CI_BASE_SHA:scripts/ci_gate.py" > "$RUNNER_TEMP/ci-gate-base.py"; then
+            python3 -I "$RUNNER_TEMP/ci-gate-base.py" select
+          else
+            printf '%s\n' 'mode=full' >> "$GITHUB_OUTPUT"
+            echo "Base CI policy unavailable; running the full matrix."
+          fi
+
   typos:
     name: Typos
     if: github.event_name != 'pull_request' || github.event.action != 'closed'
@@ -100,7 +107,7 @@ jobs:
       - name: Typos check with custom config file
         uses: crate-ci/typos@37bb98842b0d8c4ffebdb75301a13db0267cef89 # master
 
-  # Fail early with compile-free checks shared with docs-only CI.
+  # Fail early with compile-free checks for every pull request.
   quick-checks:
     name: Quick Checks
     if: github.event_name != 'pull_request' || github.event.action != 'closed'
@@ -116,9 +123,9 @@ jobs:
         uses: ./.github/actions/quick-checks
 
   test-and-lint:
-    name: Test and Lint
+    name: Workspace Test and Lint
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     runs-on: sm-standard-4
     timeout-minutes: 90
     env:
@@ -289,45 +296,6 @@ jobs:
       - name: Run rebalance/decommission migration proofs
         run: ./scripts/check_migration_gate_count.sh
 
-      # Record the reason before this job completes as FAILURE. A separate
-      # dependent job cancels sibling lanes only after GitHub has preserved this
-      # required check's failure verdict.
-      - name: Annotate early-stop reason
-        if: >-
-          failure() && github.event_name == 'pull_request'
-          && github.event.pull_request.head.repo.full_name == github.repository
-        run: |
-          {
-            echo "## CI early-stop"
-            echo "Job \`${GITHUB_JOB}\` (Test and Lint) failed; a follow-up job will cancel sibling lanes to free runners."
-            echo "Sibling jobs showing **cancelled** were stopped by the early-stop follow-up, not by their own failure."
-          } >> "$GITHUB_STEP_SUMMARY"
-
-  # Preserve the required Test and Lint FAILURE verdict before stopping sibling
-  # lanes. Cancelling from inside test-and-lint changed its own conclusion to
-  # CANCELLED and hid the actionable failure in the PR checks UI.
-  cancel-after-test-and-lint-failure:
-    name: Cancel siblings after Test and Lint failure
-    if: >-
-      failure() && needs.test-and-lint.result == 'failure'
-      && github.event_name == 'pull_request'
-      && github.event.pull_request.head.repo.full_name == github.repository
-    needs: [ test-and-lint ]
-    runs-on: ubuntu-latest
-    timeout-minutes: 5
-    permissions:
-      actions: write
-    steps:
-      - name: Cancel remaining jobs
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          curl -fsS -X POST \
-            -H "Authorization: Bearer ${GH_TOKEN}" \
-            -H "Accept: application/vnd.github+json" \
-            -H "X-GitHub-Api-Version: 2022-11-28" \
-            "${GITHUB_API_URL}/repos/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID}/cancel"
-
   # Dedicated serial lane for the ILM / lifecycle integration tests. These tests
   # drive the object layer through process-global singletons (the GLOBAL_ENV
   # ECStore, the global tier-config manager, background-expiry workers) and bind
@@ -340,8 +308,8 @@ jobs:
   # See rustfs/backlog#1148 (ilm-1) and #1155.
   test-ilm-integration-serial:
     name: ILM Integration (serial)
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     runs-on: sm-standard-4
     timeout-minutes: 90
     env:
@@ -408,8 +376,8 @@ jobs:
 
   test-and-lint-rio-v2:
     name: Test and Lint (rio-v2)
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     runs-on: sm-standard-4
     timeout-minutes: 90
     env:
@@ -449,8 +417,8 @@ jobs:
 
   connect-short-credential-boundary:
     name: Connect Short Credential Boundary
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     runs-on: sm-standard-4
     timeout-minutes: 60
     env:
@@ -507,8 +475,8 @@ jobs:
 
   test-and-lint-protocols:
     name: "Test and Lint (${{ matrix.features.name }})"
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     runs-on: sm-standard-4
     timeout-minutes: 90
     strategy:
@@ -561,8 +529,8 @@ jobs:
 
   build-rustfs-debug-binary:
     name: Build RustFS Debug Binary
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     runs-on: sm-standard-4
     timeout-minutes: 30
     env:
@@ -600,7 +568,7 @@ jobs:
                       digest.update(chunk)
               return digest.hexdigest()
 
-          argv = ["cargo", "build", "-p", "rustfs", "--bins", "--features", "e2e-test-hooks"]
+          argv = ["python3", "scripts/e2e_binary.py", "build", "--bins", "--features", "e2e-test-hooks"]
           commit, tree = git("rev-parse", "HEAD"), git("rev-parse", "HEAD^{tree}")
           clean_before = not git("status", "--porcelain", "--untracked-files=normal")
           if not clean_before:
@@ -634,6 +602,7 @@ jobs:
           name: rustfs-debug-binary
           path: |
             target/debug/rustfs
+            target/debug/rustfs.e2e.json
             target/debug/rustfs.e2e-startup-cas-build.json
           if-no-files-found: error
           retention-days: 1
@@ -666,13 +635,15 @@ jobs:
           install-build-packaging-tools: 'false'
 
       - name: Build debug binary with rio-v2
-        run: cargo build -p rustfs --bins --features rio-v2,e2e-test-hooks
+        run: python3 scripts/e2e_binary.py build --bins --features rio-v2,e2e-test-hooks
 
       - name: Upload debug binary
         uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6
         with:
           name: rustfs-debug-binary-rio-v2
-          path: target/debug/rustfs
+          path: |
+            target/debug/rustfs
+            target/debug/rustfs.e2e.json
           if-no-files-found: error
           retention-days: 1
 
@@ -684,8 +655,8 @@ jobs:
     # job had neither, so each closed/merged PR really ran the whole io_uring
     # suite (measured 4m17s / 7m19s / 7m31s on runs 30678272341 / 30678117601 /
     # 30662728539) and kept the cancellation run in progress for minutes.
-    if: github.event_name != 'pull_request' || github.event.action != 'closed'
+    if: needs.classify-changes.outputs.mode == 'full' && (github.event_name != 'pull_request' || github.event.action != 'closed')
-    needs: [ quick-checks ]
+    needs: [ quick-checks, classify-changes ]
     # GitHub-hosted ubuntu-latest runs a recent kernel with io_uring and, unlike
     # a container, applies no seccomp filter that would block io_uring_setup — so
     # the probe succeeds and the tests exercise the real UringBackend/FdCache/
@@ -821,7 +792,7 @@ jobs:
           NEXTEST_ARCHIVE: ${{ runner.temp }}/rustfs-e2e-smoke.tar.zst
           RUSTFS_E2E_LOG_DIR: ${{ runner.temp }}/rustfs-e2e-smoke-logs
         run: |
-          cargo nextest run --profile e2e-smoke --archive-file "${NEXTEST_ARCHIVE}" \
+          python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run --profile e2e-smoke --archive-file "${NEXTEST_ARCHIVE}" \
             --status-level all --final-status-level all --failure-output final
 
       - name: Upload e2e smoke diagnostics
@@ -857,7 +828,7 @@ jobs:
           RUSTFS_TEST_PORT="$(python3 -c 'import socket; s=socket.socket(); s.bind(("127.0.0.1", 0)); print(s.getsockname()[1]); s.close()')"
           RUSTFS_TEST_PORT="${RUSTFS_TEST_PORT}" \
           RUSTFS_TEST_LOG="${RUN_ROOT}/rustfs.log" \
-          ./scripts/e2e-run.sh ./target/debug/rustfs "${RUN_ROOT}/data"
+          python3 scripts/e2e_binary.py run --features e2e-test-hooks -- ./scripts/e2e-run.sh ./target/debug/rustfs "${RUN_ROOT}/data"
 
       - name: Upload test logs
         if: failure()
@@ -985,6 +956,7 @@ jobs:
           if manifest["binary_sha256"] != digest.hexdigest() or manifest["commit"] != commit:
               raise SystemExit("downloaded hooks binary identity mismatch")
           shutil.copy2(manifest_path, target / manifest_path.name)
+          shutil.copy2(source.with_name("rustfs.e2e.json"), target / "rustfs.e2e.json")
           binary.chmod(0o755)
           PYINPUT
 
@@ -1004,7 +976,7 @@ jobs:
           RUSTFS_E2E_STARTUP_CAS_BINARY: ${{ runner.temp }}/rustfs-startup-cas-input/rustfs
           RUSTFS_E2E_STARTUP_CAS_BUILD_MANIFEST: ${{ runner.temp }}/rustfs-startup-cas-input/rustfs.e2e-startup-cas-build.json
           RUSTFS_E2E_STARTUP_CAS_ARTIFACT_DIR: ${{ runner.temp }}/rustfs-startup-cas-evidence
-        run: cargo nextest run --profile e2e-full -p e2e_test
+        run: python3 scripts/e2e_binary.py run --binary "$RUSTFS_E2E_STARTUP_CAS_BINARY" --features e2e-test-hooks -- cargo nextest run --profile e2e-full -p e2e_test
 
       - name: Upload junit
         if: always()
@@ -1076,7 +1048,7 @@ jobs:
       - name: Run end-to-end tests
         run: |
           s3s-e2e --version
-          ./scripts/e2e-run.sh ./target/debug/rustfs /tmp/rustfs
+          python3 scripts/e2e_binary.py run --features rio-v2,e2e-test-hooks -- ./scripts/e2e-run.sh ./target/debug/rustfs /tmp/rustfs
 
       - name: Upload test logs
         if: failure()
@@ -1119,7 +1091,7 @@ jobs:
           S3_PORT="${S3_PORT}" \
           DATA_ROOT="${RUN_ROOT}" \
           S3TESTS_CONF=artifacts/s3tests-single/s3tests.conf \
-          ./scripts/s3-tests/run.sh
+          python3 scripts/e2e_binary.py run --features e2e-test-hooks -- ./scripts/s3-tests/run.sh
 
       - name: Upload s3 test artifacts
         if: always()
@@ -1201,7 +1173,7 @@ jobs:
           S3_PORT="${S3_PORT}" \
           DATA_ROOT="${RUN_ROOT}" \
           S3TESTS_CONF=artifacts/s3tests-single/s3tests.conf \
-          ./scripts/s3-tests/run.sh
+          python3 scripts/e2e_binary.py run --features e2e-test-hooks -- ./scripts/s3-tests/run.sh
 
       - name: Upload s3 test artifacts
         if: always()
@@ -1212,9 +1184,44 @@ jobs:
           if-no-files-found: ignore
           retention-days: 3
 
+  required-checks:
+    name: Test and Lint
+    if: always() && (github.event_name != 'pull_request' || github.event.action != 'closed')
+    needs:
+      - classify-changes
+      - typos
+      - quick-checks
+      - test-and-lint
+      - test-ilm-integration-serial
+      - test-and-lint-rio-v2
+      - connect-short-credential-boundary
+      - test-and-lint-protocols
+      - build-rustfs-debug-binary
+      - uring-integration
+      - e2e-tests
+      - s3-implemented-tests
+      - s3-lifecycle-behavior-tests
+      - build-rustfs-debug-binary-rio-v2
+      - e2e-tests-rio-v2
+      - e2e-full
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    steps:
+      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7
+        with:
+          persist-credentials: false
+      - name: Require the expected result of every CI lane
+        env:
+          CI_NEEDS: ${{ toJSON(needs) }}
+        shell: bash
+        run: python3 scripts/ci_gate.py verify
+
   alert-on-failure:
     name: Alert on scheduled failure
     needs:
+      - classify-changes
+      - connect-short-credential-boundary
+      - required-checks
       - typos
       - quick-checks
       - test-and-lint

.github/workflows/e2e-distributed.yml

@@ -151,8 +151,7 @@ jobs:
 
       - name: Build rustfs binary
         run: |
-          cargo build -p rustfs --bins
+          python3 scripts/e2e_binary.py build --bins
-          : > target/debug/rustfs.features
 
       - name: Verify distributed e2e membership
         env:
@@ -168,9 +167,9 @@ jobs:
         run: |
           set -euo pipefail
           if [ -n "${FILTER}" ]; then
-            cargo nextest run --profile e2e-distributed -p e2e_test -E "${FILTER}"
+            python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-distributed -p e2e_test -E "${FILTER}"
           else
-            cargo nextest run --profile e2e-distributed -p e2e_test --no-tests=fail
+            python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-distributed -p e2e_test --no-tests=fail
           fi
 
       - name: Upload distributed e2e diagnostics

.github/workflows/e2e-replication-nightly.yml

@@ -89,14 +89,10 @@ jobs:
       - name: Verify awscurl
         run: test -x "$AWSCURL_PATH"
 
-      # Build the rustfs binary once up front. The e2e tests spawn it as a
+      # Build once and carry its source/binary identity into the test invocation.
-      # child process (crates/e2e_test/src/common.rs) and will build it on
-      # demand otherwise, but a single explicit build avoids several parallel
-      # nextest test processes racing to build it at once.
       - name: Build rustfs binary
         run: |
-          cargo build -p rustfs --bins
+          python3 scripts/e2e_binary.py build --bins
-          : > target/debug/rustfs.features
 
       - name: Verify replication e2e membership
         env:
@@ -108,7 +104,7 @@ jobs:
       - name: Run replication e2e nightly suite
         env:
           RUSTFS_E2E_LOG_DIR: ${{ runner.temp }}/rustfs-e2e-repl-nightly-logs
-        run: cargo nextest run --profile e2e-repl-nightly -p e2e_test
+        run: python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-repl-nightly -p e2e_test
 
       - name: Upload nextest junit report
         if: always()
@@ -144,8 +140,7 @@ jobs:
 
       - name: Build rustfs binary
         run: |
-          cargo build -p rustfs --bins --features e2e-test-hooks
+          python3 scripts/e2e_binary.py build --bins --features e2e-test-hooks
-          : > target/debug/rustfs.features
 
       - name: Verify cluster fault e2e membership
         env:
@@ -157,7 +152,7 @@ jobs:
       - name: Run cluster fault e2e nightly suite
         env:
           RUSTFS_E2E_LOG_DIR: ${{ runner.temp }}/rustfs-e2e-nightly-logs
-        run: cargo nextest run --profile e2e-nightly -p e2e_test
+        run: python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run --profile e2e-nightly -p e2e_test
 
       - name: Upload cluster fault diagnostics
         if: always()
@@ -198,6 +193,9 @@ jobs:
           sudo apt-get install -y -qq iproute2
           ss -tn state CLOSE-WAIT >/dev/null
 
+      - name: Build protocol server
+        run: python3 scripts/e2e_binary.py build --features "$RUSTFS_BUILD_FEATURES"
+
       # The suite owns fixed protocol ports and serializes its internal cases.
       - name: Verify protocol e2e membership
         env:
@@ -210,7 +208,7 @@ jobs:
         env:
           RUSTFS_E2E_LOG_DIR: ${{ runner.temp }}/rustfs-protocol-e2e-logs
         run: >-
-          cargo nextest run -j 1 --profile e2e-protocols -p e2e_test --no-capture
+          python3 scripts/e2e_binary.py run --features "$RUSTFS_BUILD_FEATURES" -- cargo nextest run -j 1 --profile e2e-protocols -p e2e_test --no-capture
 
       - name: Upload protocol diagnostics
         if: always()

.github/workflows/e2e-upgrade.yml

@@ -125,12 +125,11 @@ jobs:
 
       - name: Build current RustFS binary
         run: |
-          cargo build --locked -p rustfs --bin rustfs
+          python3 scripts/e2e_binary.py build
-          : > target/debug/rustfs.features
 
       - name: Run upgrade compatibility test
         run: |
-          cargo test --locked -p e2e_test \
+          python3 scripts/e2e_binary.py run -- cargo test --locked -p e2e_test \
             "upgrade_compatibility_test::${{ matrix.test }}" \
             -- --ignored --exact --nocapture
 

.github/workflows/on-demand-migration-interop.yml

@@ -132,7 +132,7 @@ jobs:
             s3api create-bucket --bucket "${RUSTFS_ODM_INTEROP_BUCKET}"
 
       - name: Build the RustFS binary under test
-        run: cargo build --locked -p rustfs --bins
+        run: python3 scripts/e2e_binary.py build --bins
 
       # The lane selects tests by module, so a rename would quietly shrink it.
       # The committed digest in .config/e2e-odm-interop-selection.txt fails
@@ -143,7 +143,7 @@ jobs:
           python3 ./scripts/check_test_wiring.py --check-profile e2e-odm-interop "${NEXTEST_LISTING}"
 
       - name: Run the interop cases against MinIO
-        run: cargo nextest run --profile e2e-odm-interop -p e2e_test --no-tests=fail
+        run: python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-odm-interop -p e2e_test --no-tests=fail
 
       - name: Build the MinIO interop report
         if: always()
@@ -251,7 +251,7 @@ jobs:
 
       - name: Build the RustFS binary under test
         if: steps.credentials.outputs.present == 'true'
-        run: cargo build --locked -p rustfs --bins
+        run: python3 scripts/e2e_binary.py build --bins
 
       # A filterset that matches nothing is valid, so the count is asserted
       # rather than inferred from a green run.
@@ -272,7 +272,7 @@ jobs:
       - name: Run the three-case minimum
         if: steps.credentials.outputs.present == 'true'
         run: |
-          cargo nextest run --profile e2e-odm-interop -p e2e_test \
+          python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-odm-interop -p e2e_test \
             -E "${CLOUD_CASE_FILTER}" --no-tests=fail
 
       - name: Build the ${{ matrix.provider }} interop report

.github/workflows/rustfs-performance-test.yml

@@ -82,6 +82,12 @@ jobs:
   performance-test:
     runs-on: pf-testing
     timeout-minutes: 900
+    env:
+      RUSTFS_BENCH_SCRIPT: ${{ github.workspace }}/auto-testing/rustfs_performance_testing.sh
+      RUSTFS_WARP_METHODS: ${{ inputs.test_method }}
+      RUSTFS_WARP_SIZES: ${{ inputs.object_size }}
+      RUSTFS_WARP_DURATION: ${{ inputs.warp_duration || '5m' }}
+      RUSTFS_WARP_CONCURRENCY: ${{ inputs.warp_concurrency || '64' }}
     # Run on manual dispatch, or when the nightly build completed successfully.
     # Skipped when nightly failed.
     if: ${{ github.event_name == 'workflow_dispatch' || github.event_name == 'repository_dispatch' }}
@@ -158,19 +164,15 @@ jobs:
       - name: Run benchmark (GET/PUT/MIXED)
         id: benchmark
         run: |
-          # Empty on automatic (workflow_run) runs -> full 30 rounds.
-          # Manual dispatch can restrict method(s)/size(s).
-          export WARP_METHODS="${{ inputs.test_method }}"
-          export WARP_SIZES="${{ inputs.object_size }}"
           ./auto-testing/rustfs_performance_test.sh \
             --step 5 -y \
-            --warp-duration "${{ inputs.warp_duration || '5m' }}" \
-            --warp-concurrency "${{ inputs.warp_concurrency || '64' }}" \
             --log-file "${LOG_FILE}"
 
       - name: Analyze results
         if: ${{ steps.benchmark.conclusion == 'success' }}
         run: |
+          export WARP_METHODS="${RUSTFS_WARP_METHODS}" WARP_SIZES="${RUSTFS_WARP_SIZES}"
+          export WARP_DURATION="${RUSTFS_WARP_DURATION}" WARP_CONCURRENCY="${RUSTFS_WARP_CONCURRENCY}"
           ./auto-testing/rustfs_performance_test.sh --step 6 -y --log-file "${LOG_FILE:-/dev/null}"
 
       - name: Collect RustFS version info

.gitignore

@@ -52,6 +52,7 @@ docs
 __pycache__/
 !docs/
 docs/*
+!docs/README.md
 !docs/architecture/
 !docs/architecture/**
 !docs/operations/

CHANGELOG.md

@@ -7,6 +7,16 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+### Replication
+
+- Object Lock replication PUTs now carry a required integrity header, fixing target rejection introduced by the plain-payload default ([#7097](https://github.com/rustfs/rustfs/pull/7097)). This changes the default outbound request for locked objects but adds no persisted format.
+- Multipart source objects stay on the multipart transport even when their checksum record is a whole-object checksum, so objects above the single-PUT limit remain replicable ([#7047](https://github.com/rustfs/rustfs/pull/7047)).
+- Targets that mint their own version IDs now use a per-target version ledger for tag, retention, legal-hold, and permanent-delete mutations; ambiguous pre-ledger matches fail with backoff instead of guessing ([#7368](https://github.com/rustfs/rustfs/pull/7368)). This adds dual-prefixed internal metadata keys that older readers ignore.
+- Single-part source checksums are forwarded as `x-amz-checksum-*` headers instead of user metadata, so the replica preserves checksum responses ([#7313](https://github.com/rustfs/rustfs/pull/7313)). This changes the default outbound headers for checksummed objects.
+- Site-replication outage recovery now uses a bounded 30-second retry drain plus the 600-second full reconciliation pass, persists destructive liabilities before local deletion, and fences replay settlement and peer edits ([#7148](https://github.com/rustfs/rustfs/pull/7148)). Persisted additions are optional and ignored by older readers.
+- IAM snapshot/deletion replay, target-assigned delete-marker purges, timestamp ordering, and best-effort peer broadcast now close the control-plane gaps found by the R6 review ([#7195](https://github.com/rustfs/rustfs/pull/7195)).
+- Upgrade and rollback: upgrade every node in one site consecutively and verify reconciliation before moving to the next site; do not intentionally run a site mixed-version. Target-version ledger keys are harmless on rollback, although old code cannot use their routing. Before rolling back past [#7307](https://github.com/rustfs/rustfs/pull/7307), drain or repair every pending version purge: older code can free a retained version's data directory before its remote purge is acknowledged. See `docs/operations/site-replication-operations.md`.
+
 ### Security
 - **Presigned URLs honour only signed headers** (GHSA-g8w9-qw9q-fghr): a SigV4 presigned request that carries an `x-amz-*` request header not listed in `X-Amz-SignedHeaders` is now rejected with `403 AccessDenied` ("There were headers present in the request which were not signed"), matching AWS S3. Previously the holder of a presigned `PutObject` URL could add unsigned `x-amz-tagging`, `x-amz-storage-class`, `x-amz-website-redirect-location`, ACL, metadata, Object Lock or SSE headers and have them applied. Presigners that intend a property must set it before signing so the SDK lists the header in `SignedHeaders`; `x-amz-cf-id` (CloudFront) remains tolerated unsigned. Header-signed SigV4 and SigV2 requests are unchanged.
 

crates/e2e_test/README.md

@@ -1,7 +1,7 @@
 # e2e_test
 
 End-to-end test suite for RustFS. Each test spawns a **real `rustfs` binary**
-(built on demand from the workspace) and drives it over the network with the
+(built and identified before the test invocation) and drives it over the network with the
 AWS SDK (`aws-sdk-s3`), raw HTTP (`reqwest` / `awscurl`), or a protocol client
 (FTPS / WebDAV / SFTP). This is the black-box integration layer: exhaustive
 end-to-end behavior lives here, unit behavior stays in the source crates
@@ -32,32 +32,28 @@ Registered in [`src/lib.rs`](src/lib.rs). Grouped by concern:
 
 ## How to run
 
-All commands assume repo root. `cargo test` triggers an on-demand build of the
+All commands assume repo root and Python 3.9 or newer on Linux or macOS. Build the server once through the provenance entry point, then run the test command through the same script:
-`rustfs` binary from [`src/common.rs`](src/common.rs) (`rustfs_binary_path`) on
-first use — the first invocation is slow, later ones reuse the binary.
 
 ```bash
-# Whole crate (default = ignored tests skipped)
+python3 scripts/e2e_binary.py build --features e2e-test-hooks
-cargo nextest run -p e2e_test
+
+# Whole crate (ignored tests remain skipped)
+python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run -p e2e_test
 
 # One module
-cargo nextest run -p e2e_test -E 'test(list_objects_v2_pagination_test)'
+python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run -p e2e_test -E 'test(list_objects_v2_pagination_test)'
-
-# PR smoke subset (see "CI smoke subset" below)
-cargo nextest run --profile e2e-smoke -p e2e_test
-
-# ILM serial lane — ignored lifecycle tests, single-threaded (mirrors CI)
-cargo nextest run -j1 --run-ignored ignored-only -p rustfs-scanner -p rustfs \
-  -E 'binary(lifecycle_integration_test) or (package(rustfs) and test(lifecycle_transition_api_test))'
 
+# PR smoke subset
+python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run --profile e2e-smoke -p e2e_test
 ```
 
-The protocols suite has its own contract (fixed bind ports 9022–9301,
+`build` records the source contents, HEAD, resolved Cargo features, profile, toolchain, and binary SHA-256 beside the executable in `rustfs.e2e.json`. `run` validates that identity before and after the command, preserves command failures, and removes its temporary run receipt on completion. The Rust harness checks that receipt before starting each server; it never compiles a server inside a test process. Source or binary changes during a run invalidate the result, even when the test command succeeds. Use an isolated worktree and keep it unchanged until the command finishes.
-single-worker execution, feature-gated scheduling) documented in
+
-[`src/protocols/README.md`](src/protocols/README.md). `RUSTFS_BUILD_FEATURES`
+The additional `--features` arguments must match between `build` and `run`; Cargo defaults remain enabled. The wrapper supplies `RUSTFS_BUILD_FEATURES` from Cargo's resolved feature list, including features enabled by `full`. Protocol helpers require a subset of that list. `CARGO_TARGET_DIR` and `--profile release` are supported. An in-workspace target directory must be Git-ignored; tracked files are always included in the source identity. `build --bins` preserves CI lanes that compile all RustFS binary targets. For a downloaded artifact, copy both the executable and its sidecar, then use `run`; do not generate a new identity for an arbitrary prebuilt binary. `CARGO_BIN_EXE_rustfs` cannot override the verified executable.
-selects which features the spawned binary is built with; leave it unset to run
+
-every protocol entry. Use the exact profile command under
+Each build/run holds an exclusive `rustfs.e2e.lock` marker beside the binary; concurrent wrappers fail immediately. Use a private target directory and do not run ordinary Cargo builds against it while tests are active: Cargo does not honor this marker. Interrupted runs fail and terminate their command group. After an uncatchable kill, inspect the PID recorded in a leftover marker and remove it only after confirming its owner has stopped. Embedded file symlinks are hashed through their target; embedded directory symlinks are rejected because their contents cannot be enumerated safely by this entry point.
-[Troubleshooting](#troubleshooting) for CI-equivalent execution.
+
+The protocols suite has its own fixed-port and single-worker contract in [`src/protocols/README.md`](src/protocols/README.md). Use its command under [Troubleshooting](#troubleshooting).
 
 ### `#[ignore]` semantics
 
@@ -123,7 +119,7 @@ via `create_s3_client(idx)` / `create_all_clients()`. See
 | `wait_for_server_ready` | Poll readiness before issuing requests |
 | `create_s3_client` / `create_test_bucket` / `delete_test_bucket` | aws-sdk-s3 client + bucket lifecycle |
 | `find_available_port` | Random free port (isolation primitive) |
-| `rustfs_binary_path` / `_with_features` | Locate/build the binary; honors `RUSTFS_BUILD_FEATURES` |
+| `rustfs_binary_path` / `_with_features` | Verify this run's binary receipt and required feature subset |
 | `requested_rustfs_build_features` / `rustfs_build_feature_enabled` | Feature-gate a test to what the binary was built with |
 | `execute_awscurl` / `awscurl_post` / `_get` / `_put` / `_delete` / `awscurl_post_sts_form_urlencoded` | Admin/STS API calls via `awscurl`; missing binaries are test failures |
 | `replication_fast_env` | Env vars that shrink replication timers (from repl-4); pass to `start_rustfs_server_with_env` |
@@ -189,35 +185,33 @@ the wiring source of truth. Committed test-ID digests under
 **Reproduce a CI failure locally** — run the exact profile/lane:
 
 ```bash
-# Smoke (e2e-tests job) — includes the 20 fast replication tests
+# Smoke, full, and cluster lanes share a server with fault-test hooks.
-cargo nextest run --profile e2e-smoke -p e2e_test
+python3 scripts/e2e_binary.py build --features e2e-test-hooks
-# Full single-node merge/main lane
+python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run --profile e2e-smoke -p e2e_test
-cargo nextest run --profile e2e-full -p e2e_test
+python3 scripts/e2e_binary.py run --binary "$RUSTFS_E2E_STARTUP_CAS_BINARY" --features e2e-test-hooks -- cargo nextest run --profile e2e-full -p e2e_test
-# Cluster fault nightly lane
+python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run --profile e2e-nightly -p e2e_test
-cargo nextest run --profile e2e-nightly -p e2e_test
+
-# 4-node 4-disk distributed lane (S3 / lock / versioning / replication / decommission / chaos / upgrade)
+# Distributed 4-node 4-disk lane uses the default server.
-# Upgrade cases need RUSTFS_UPGRADE_SOURCE_BINARY; without it they fail closed.
+# Upgrade cases require RUSTFS_UPGRADE_SOURCE_BINARY and fail closed without it.
-cargo nextest run --profile e2e-distributed -p e2e_test
+python3 scripts/e2e_binary.py build
-# Replication nightly lane; awscurl is required for STS paths
+python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-distributed -p e2e_test
-cargo nextest run --profile e2e-repl-nightly -p e2e_test
+
-# Fixed-port protocol nightly lane
+# Replication nightly uses the default server; awscurl is required for STS.
-RUSTFS_BUILD_FEATURES=ftps,webdav,sftp \
+python3 scripts/e2e_binary.py build
-  cargo nextest run -j 1 --profile e2e-protocols -p e2e_test --no-capture
+python3 scripts/e2e_binary.py run -- cargo nextest run --profile e2e-repl-nightly -p e2e_test
-# ILM serial lane
+
+# Protocol nightly owns fixed ports.
+python3 scripts/e2e_binary.py build --features ftps,webdav,sftp
+python3 scripts/e2e_binary.py run --features ftps,webdav,sftp -- cargo nextest run -j 1 --profile e2e-protocols -p e2e_test --no-capture
+
+# The ILM serial lane does not use this server harness.
 cargo nextest run -j1 --run-ignored ignored-only -p rustfs-scanner -p rustfs \
   -E 'binary(lifecycle_integration_test) or (package(rustfs) and test(lifecycle_transition_api_test))'
-# s3s-e2e black box
-./scripts/e2e-run.sh ./target/debug/rustfs /tmp/rustfs-e2e-data
 ```
 
-**Stale binary.** Tests build the `rustfs` binary once and reuse it. To avoid
+The full lane also requires the startup-CAS build manifest generated by the `Build debug binary` step in `.github/workflows/ci.yml`. Preserve that binary and both sidecars as its `Preserve startup CAS binary input` step does, and use the same `RUSTFS_E2E_STARTUP_CAS_*` environment as `Run e2e full suite`. A generic local build alone does not supply that fixture evidence.
-rebuilding while iterating on tests, `common.rs` reuses an existing binary when
+
-running *inside* the e2e test process even if sources changed
+**Stale or unverified binary.** Re-run the matching `build` command after changing source or features, then invoke tests through `run`. A missing receipt, copied old executable, or mismatched build identity is a prerequisite failure. Bare Cargo invocations that start a server deliberately fail; unit tests that do not start a server can still run directly.
-(`can_reuse_inside_e2e`, [`src/common.rs`](src/common.rs) line 98). Downside: if
-you changed **server** code, force a rebuild with
-`cargo build -p rustfs` (or `touch` a source file outside the reuse window)
-before re-running, or CI's freshly built artifact will diverge from your local
-one.
 
 **Port already in use / orphan processes.** A hard-killed run can leak a
 `rustfs` child holding its port. Find and kill it:
@@ -249,7 +243,8 @@ spawn error. Install the pinned CI version before running their profiles.
 A subset of this crate runs on every PR via the `e2e-tests` job:
 
 ```bash
-cargo nextest run --profile e2e-smoke -p e2e_test
+python3 scripts/e2e_binary.py build --features e2e-test-hooks
+python3 scripts/e2e_binary.py run --features e2e-test-hooks -- cargo nextest run --profile e2e-smoke -p e2e_test
 ```
 
 The selection lives in `.config/nextest.toml` under `[profile.e2e-smoke]`

crates/e2e_test/src/common.rs

@@ -31,7 +31,6 @@ use rustfs_signer::constants::UNSIGNED_PAYLOAD;
 use rustfs_signer::sign_v4;
 use s3s::Body;
 use serde_json;
-use std::ffi::OsStr;
 use std::fs as stdfs;
 use std::io::ErrorKind;
 use std::net::SocketAddr;
@@ -44,7 +43,6 @@ use tokio::net::TcpStream;
 use tokio::time::sleep;
 use tracing::{error, info, warn};
 use uuid::Uuid;
-use walkdir::WalkDir;
 
 // Common constants for all E2E tests
 pub const DEFAULT_ACCESS_KEY: &str = "rustfsadmin";
@@ -428,59 +426,75 @@ fn resolve_rustfs_binary_path(workspace: &Path, configured_target_dir: Option<&P
     path
 }
 
-/// Resolve the RustFS binary relative to the workspace, optionally requesting build features.
+/// Resolve the server verified by `scripts/e2e_binary.py run` for this test invocation.
+/// Requested features are a required subset of the server's resolved Cargo features.
 pub fn rustfs_binary_path_with_features(requested_features: Option<&str>) -> PathBuf {
-    if let Some(path) = std::env::var_os("CARGO_BIN_EXE_rustfs") {
-        return PathBuf::from(path);
-    }
-    let requested_features = requested_features.and_then(normalize_rustfs_build_features);
-
     let workspace = workspace_root();
     let configured_target_dir = std::env::var_os("CARGO_TARGET_DIR").map(PathBuf::from);
-    let binary_path = resolve_rustfs_binary_path(&workspace, configured_target_dir.as_deref());
+    let binary_path = std::env::var_os("CARGO_BIN_EXE_rustfs")
-
+        .map(PathBuf::from)
-    let features_match = binary_features_match(&binary_path, requested_features.as_deref());
+        .unwrap_or_else(|| resolve_rustfs_binary_path(&workspace, configured_target_dir.as_deref()));
-    let source_is_newer = workspace_sources_newer_than_binary(&binary_path);
+    let receipt_path = std::env::var_os("RUSTFS_E2E_BINARY_RECEIPT").map(PathBuf::from);
-    let can_reuse_inside_e2e = running_inside_e2e_test_binary() && requested_features.is_none() && features_match;
+    receipt_path
-    if binary_path.is_file() && features_match && (!source_is_newer || can_reuse_inside_e2e) {
+        .ok_or_else(|| std::io::Error::new(ErrorKind::NotFound, "missing E2E run receipt"))
-        if source_is_newer {
+        .and_then(|receipt| verify_e2e_binary_receipt(&receipt, &workspace, &binary_path, requested_features))
-            warn!(
+        .unwrap_or_else(|error| {
-                "RustFS binary at {:?} appears older than workspace sources; reusing it inside cargo test to avoid nested builds",
+            panic!(
-                binary_path
+                "E2E server prerequisite failed: {error}. Build with `python3 scripts/e2e_binary.py build --features <features>` and run tests with `python3 scripts/e2e_binary.py run --features <features> -- cargo nextest run ...`"
-            );
+            )
-        }
+        })
-        info!("Using existing RustFS binary at {:?}", binary_path);
-        return binary_path;
 }
 
-    info!("Building RustFS binary to ensure it's up to date...");
+#[derive(serde::Deserialize)]
-    build_rustfs_binary(requested_features.as_deref(), &binary_path);
+#[serde(deny_unknown_fields)]
-
+struct E2eBinaryReceipt {
-    info!("Using RustFS binary at {:?}", binary_path);
+    schema: u32,
-    binary_path
+    workspace: PathBuf,
+    binary: PathBuf,
+    size: u64,
+    modified_ns: u128,
+    features: Vec<String>,
 }
 
-fn workspace_sources_newer_than_binary(binary_path: &PathBuf) -> bool {
+fn verify_e2e_binary_receipt(
-    let Ok(binary_meta) = std::fs::metadata(binary_path) else {
+    receipt_path: &Path,
-        return true;
+    workspace: &Path,
-    };
+    binary_path: &Path,
-    let Ok(binary_modified) = binary_meta.modified() else {
+    requested_features: Option<&str>,
-        return true;
+) -> std::io::Result<PathBuf> {
-    };
+    let receipt: E2eBinaryReceipt = serde_json::from_slice(&stdfs::read(receipt_path)?)?;
-
+    let binary = binary_path.canonicalize()?;
-    let workspace = workspace_root();
+    let metadata = binary.metadata()?;
-    let watch_roots = [
+    let modified_ns = metadata
-        workspace.join("Cargo.toml"),
+        .modified()?
-        workspace.join("Cargo.lock"),
+        .duration_since(std::time::UNIX_EPOCH)
-        workspace.join("rustfs"),
+        .map_err(std::io::Error::other)?
-        workspace.join("crates"),
+        .as_nanos();
-    ];
+    // The runner hashes source and binary before/after the entire suite. Each
-
+    // nextest process checks only this invocation's path, features, and file stat.
-    watch_roots.iter().any(|path| path_is_newer_than(binary_modified, path))
+    if receipt.schema != 1
+        || receipt.workspace != workspace.canonicalize()?
+        || receipt.binary != binary
+        || !metadata.is_file()
+        || receipt.size != metadata.len()
+        || receipt.modified_ns != modified_ns
+    {
+        return Err(std::io::Error::new(
+            ErrorKind::InvalidData,
+            "E2E server differs from this run's verified binary",
+        ));
     }
-
+    if let Some(requested) = requested_features.and_then(normalize_rustfs_build_features)
-fn running_inside_e2e_test_binary() -> bool {
+        && requested
-    std::env::var("CARGO_PKG_NAME").is_ok_and(|value| value == "e2e_test")
+            .split(',')
+            .any(|feature| !receipt.features.iter().any(|actual| actual == feature))
+    {
+        return Err(std::io::Error::new(
+            ErrorKind::InvalidInput,
+            "E2E server is missing a requested build feature",
+        ));
+    }
+    Ok(binary)
 }
 
 pub fn requested_rustfs_build_features() -> Option<String> {
@@ -510,96 +524,6 @@ pub fn rustfs_build_feature_enabled(requested_features: Option<&str>, required_f
         .any(|feature| feature.eq_ignore_ascii_case(RUSTFS_FULL_FEATURE) || feature.eq_ignore_ascii_case(required_feature))
 }
 
-fn rustfs_binary_features_stamp_path(binary_path: &Path) -> PathBuf {
-    binary_path.with_extension("features")
-}
-
-fn binary_features_match(binary_path: &Path, requested_features: Option<&str>) -> bool {
-    let stamp_path = rustfs_binary_features_stamp_path(binary_path);
-    let recorded = stdfs::read_to_string(stamp_path)
-        .ok()
-        .and_then(|value| normalize_rustfs_build_features(&value));
-    let requested = requested_features.and_then(normalize_rustfs_build_features);
-
-    match requested.as_deref() {
-        Some(features) => recorded.as_deref() == Some(features),
-        None => recorded.is_none(),
-    }
-}
-
-fn path_is_newer_than(binary_modified: std::time::SystemTime, path: &Path) -> bool {
-    if path.is_file() {
-        return std::fs::metadata(path)
-            .and_then(|meta| meta.modified())
-            .map(|modified| modified > binary_modified)
-            .unwrap_or(false);
-    }
-
-    if !path.is_dir() {
-        return false;
-    }
-
-    WalkDir::new(path)
-        .into_iter()
-        .filter_entry(|entry| {
-            let name = entry.file_name();
-            name != OsStr::new("target") && name != OsStr::new(".git")
-        })
-        .filter_map(Result::ok)
-        .filter(|entry| entry.file_type().is_file())
-        .any(|entry| {
-            std::fs::metadata(entry.path())
-                .and_then(|meta| meta.modified())
-                .map(|modified| modified > binary_modified)
-                .unwrap_or(false)
-        })
-}
-
-/// Build the RustFS binary using cargo
-fn build_rustfs_binary(requested_features: Option<&str>, binary_path: &Path) {
-    let workspace = workspace_root();
-    info!("Building RustFS binary from workspace: {:?}", workspace);
-
-    let _profile = if cfg!(debug_assertions) {
-        info!("Building in debug mode");
-        "dev"
-    } else {
-        info!("Building in release mode");
-        "release"
-    };
-
-    let mut cmd = Command::new("cargo");
-    cmd.current_dir(&workspace).args(["build", "--bin", "rustfs"]);
-
-    if let Some(features) = requested_features {
-        cmd.arg("--features").arg(features);
-        info!("Building with features: {}", features);
-    }
-
-    if !cfg!(debug_assertions) {
-        cmd.arg("--release");
-    }
-
-    info!(
-        "Executing: cargo build --bin rustfs {}",
-        if cfg!(debug_assertions) { "" } else { "--release" }
-    );
-
-    let output = cmd.output().expect("Failed to execute cargo build command");
-
-    if !output.status.success() {
-        let stderr = String::from_utf8_lossy(&output.stderr);
-        panic!("Failed to build RustFS binary. Error: {stderr}");
-    }
-
-    let stamp_path = rustfs_binary_features_stamp_path(binary_path);
-    if let Err(err) = stdfs::write(&stamp_path, requested_features.unwrap_or_default()) {
-        warn!("Failed to write RustFS feature stamp {:?}: {}", stamp_path, err);
-    }
-
-    info!("✅ RustFS binary built successfully");
-}
-
 fn awscurl_binary_path() -> PathBuf {
     std::env::var_os("AWSCURL_PATH")
         .map(PathBuf::from)
@@ -2229,16 +2153,66 @@ mod tests {
     }
 
     #[test]
-    fn binary_feature_stamp_matching_uses_normalized_features() {
+    fn explicit_binary_without_run_receipt_is_rejected() {
-        let binary_path = std::env::temp_dir().join(format!("rustfs-feature-stamp-test-{}", Uuid::new_v4()));
+        const CHILD_ENV: &str = "RUSTFS_E2E_RECEIPT_TEST_CHILD";
-        let stamp_path = rustfs_binary_features_stamp_path(&binary_path);
+        if std::env::var_os(CHILD_ENV).is_some() {
+            rustfs_binary_path_with_features(None);
+            return;
+        }
+        let executable = std::env::current_exe().expect("locate isolated test process");
+        let output = Command::new(&executable)
+            .args([
+                "--exact",
+                "common::tests::explicit_binary_without_run_receipt_is_rejected",
+                "--nocapture",
+            ])
+            .env(CHILD_ENV, "1")
+            .env("CARGO_BIN_EXE_rustfs", &executable)
+            .env_remove("RUSTFS_E2E_BINARY_RECEIPT")
+            .output()
+            .expect("run the missing-receipt scenario with isolated environment variables");
+        assert!(!output.status.success(), "an explicit binary must not bypass run verification");
+        assert!(String::from_utf8_lossy(&output.stderr).contains("missing E2E run receipt"));
+    }
 
-        stdfs::write(&stamp_path, " SFTP, ftps ").expect("write feature stamp");
+    #[test]
-        assert!(binary_features_match(&binary_path, Some("sftp,ftps")));
+    fn e2e_run_receipt_rejects_replaced_binary_and_missing_features() {
-        assert!(binary_features_match(&binary_path, Some(" SFTP, FTPS ")));
+        let directory = std::env::temp_dir().join(format!("rustfs-e2e-receipt-test-{}", Uuid::new_v4()));
-        assert!(!binary_features_match(&binary_path, Some("sftp")));
+        stdfs::create_dir(&directory).expect("create receipt fixture");
-
+        let binary = directory.join("rustfs");
-        stdfs::remove_file(stamp_path).ok();
+        let receipt = directory.join("receipt.json");
+        stdfs::write(&binary, "server").expect("write fixture binary");
+        let metadata = binary.metadata().expect("stat fixture binary");
+        let record = serde_json::json!({
+            "schema": 1,
+            "workspace": directory.canonicalize().expect("canonical workspace"),
+            "binary": binary.canonicalize().expect("canonical binary"),
+            "size": metadata.len(),
+            "modified_ns": metadata.modified().expect("modified time").duration_since(std::time::UNIX_EPOCH).expect("positive timestamp").as_nanos(),
+            "features": ["default", "full", "ftps", "webdav", "sftp"]
+        });
+        stdfs::write(&receipt, serde_json::to_vec(&record).expect("serialize receipt")).expect("write receipt");
+        verify_e2e_binary_receipt(&receipt, &directory, &binary, Some("sftp,webdav")).expect("resolved feature subset");
+        verify_e2e_binary_receipt(&receipt, &directory, &binary, Some("full")).expect("full was actually requested");
+        assert_eq!(
+            verify_e2e_binary_receipt(&receipt, &directory, &binary, Some("rio-v2"))
+                .expect_err("full does not enable rio-v2")
+                .kind(),
+            ErrorKind::InvalidInput
+        );
+        let other = directory.join("old-server");
+        stdfs::write(&other, "server").expect("write alternate binary");
+        assert!(verify_e2e_binary_receipt(&receipt, &directory, &other, None).is_err());
+        stdfs::write(&binary, "different server").expect("replace fixture binary");
+        assert!(verify_e2e_binary_receipt(&receipt, &directory, &binary, None).is_err());
+        stdfs::remove_file(&receipt).expect("remove expired receipt");
+        assert_eq!(
+            verify_e2e_binary_receipt(&receipt, &directory, &binary, None)
+                .expect_err("expired receipt")
+                .kind(),
+            ErrorKind::NotFound
+        );
+        stdfs::remove_dir_all(directory).expect("remove receipt fixture");
     }
 
     /// Build a cluster environment struct in-memory (no ports, no processes) so

crates/e2e_test/src/on_demand_migration/interaction_test.rs

@@ -1137,7 +1137,12 @@ async fn test_odm_admin_config_is_redacted_and_status_counts_match_the_source()
         let miss = env.raw_get(bucket, miss_key).await?;
         assert_eq!(miss.status, 404, "{}", String::from_utf8_lossy(&miss.body));
     }
-    assert!(env.wait_local_listed(bucket, hit_key, SETTLE).await?);
+    let (listed, _, _) = tokio::try_join!(
+        env.wait_local_listed(bucket, hit_key, SETTLE),
+        env.wait_for_status_counter(bucket, "/counters/pulled_objects_total/inline", 1, SETTLE),
+        env.wait_for_status_counter(bucket, "/counters/pulled_bytes_total", body.len() as u64, SETTLE),
+    )?;
+    assert!(listed);
 
     let status = env.status_json(bucket).await?;
     assert_eq!(status.pointer("/configured").and_then(Value::as_bool), Some(true), "{status}");

crates/e2e_test/src/protocols/README.md

@@ -17,15 +17,13 @@ Use the canonical CI-equivalent protocol command in the parent
 For targeted debugging of the core suite only:
 
 ```bash
-RUSTFS_BUILD_FEATURES=ftps,webdav,sftp cargo test --package e2e_test test_protocol_core_suite -- --test-threads=1 --nocapture
+python3 scripts/e2e_binary.py build --features ftps,webdav,sftp
+python3 scripts/e2e_binary.py run --features ftps,webdav,sftp -- cargo test --package e2e_test test_protocol_core_suite -- --test-threads=1 --nocapture
 ```
 
 This targeted command does not cover the full `e2e-protocols` profile.
 
-`RUSTFS_BUILD_FEATURES` controls which features the test rustfs binary is
+`e2e_binary.py` supplies `RUSTFS_BUILD_FEATURES` from the verified server's resolved Cargo features. The protocol runner schedules only entries present in that feature list; helpers check that their required features are available without rebuilding the server.
-built with. When this variable is set, the protocol test runner schedules
-only entries whose protocol is present in the requested feature list. Leave
-it unset to run every protocol entry.
 `--test-threads=1` is required because every entry spawns a rustfs server
 on fixed bind ports.
 

crates/e2e_test/src/replication_extension_test.rs

@@ -4235,6 +4235,16 @@ async fn test_bucket_replication_acceptance_matrix_local_dual_targets() -> TestR
     <ExistingObjectReplication><Status>Enabled</Status></ExistingObjectReplication>
     <Destination><Bucket>{target_b_arn}</Bucket></Destination>
   </Rule>
+  <Rule>
+    <ID>matrix-and-tags</ID>
+    <Priority>135</Priority>
+    <Status>Enabled</Status>
+    <Filter><And><Prefix>and-tags/</Prefix><Tag><Key>env</Key><Value>prod</Value></Tag><Tag><Key>tier</Key><Value>gold</Value></Tag></And></Filter>
+    <DeleteMarkerReplication><Status>Disabled</Status></DeleteMarkerReplication>
+    <DeleteReplication><Status>Enabled</Status></DeleteReplication>
+    <ExistingObjectReplication><Status>Enabled</Status></ExistingObjectReplication>
+    <Destination><Bucket>{target_b_arn}</Bucket></Destination>
+  </Rule>
   <Rule>
     <ID>matrix-disabled</ID>
     <Priority>140</Priority>
@@ -4289,6 +4299,7 @@ async fn test_bucket_replication_acceptance_matrix_local_dual_targets() -> TestR
         "matrix-prefix",
         "matrix-tag",
         "matrix-disabled",
+        "matrix-and-tags",
         "matrix-priority-high",
         "Priority>200",
         "<Status>Disabled</Status>",
@@ -4409,6 +4420,30 @@ async fn test_bucket_replication_acceptance_matrix_local_dual_targets() -> TestR
     put_single_tag_current(&source_client, source_bucket, "tagged/no-match.txt", "route", "tagged").await?;
     assert_replication_key_absent(&target_client_b, target_bucket_b, "tagged/no-match.txt", Duration::from_secs(3)).await?;
 
+    // S3 and MinIO both read `And.Tags` as AND: an object carrying only one of
+    // the required tags is not admitted. Matching any single tag would push
+    // data to a destination the rule never selected (backlog#2366 P1-1), and
+    // the two-tag rule is the shape `mc replicate add --tags "k1=v1&k2=v2"`
+    // writes, so a single-tag rule passing is not evidence for this.
+    source_client
+        .put_object()
+        .bucket(source_bucket)
+        .key("and-tags/partial.txt")
+        .tagging("env=prod")
+        .body(ByteStream::from_static(b"one of two tags"))
+        .send()
+        .await?;
+    assert_replication_key_absent(&target_client_b, target_bucket_b, "and-tags/partial.txt", Duration::from_secs(3)).await?;
+    source_client
+        .put_object()
+        .bucket(source_bucket)
+        .key("and-tags/full.txt")
+        .tagging("env=prod&tier=gold")
+        .body(ByteStream::from_static(b"both tags"))
+        .send()
+        .await?;
+    wait_for_user_get_object(&target_client_b, target_bucket_b, "and-tags/full.txt").await?;
+
     source_client
         .put_object()
         .bucket(source_bucket)

crates/replication/src/config.rs

@@ -166,6 +166,24 @@ fn rule_replicates(rule: &ReplicationRule, obj: &ObjectOpts) -> bool {
     }
 }
 
+fn replication_filter_tags_match(filter: &s3s::dto::ReplicationRuleFilter, object_tags: &HashMap<String, String>) -> bool {
+    let tag_matches = |tag: &s3s::dto::Tag| match (&tag.key, &tag.value) {
+        (None, None) => true,
+        (Some(key), _) if key.is_empty() => true,
+        (Some(key), Some(value)) => object_tags.get(key) == Some(value),
+        _ => false,
+    };
+
+    filter
+        .and
+        .as_ref()
+        .and_then(|and| and.tags.as_deref())
+        .into_iter()
+        .flatten()
+        .chain(filter.tag.iter())
+        .all(tag_matches)
+}
+
 #[derive(Debug, Clone, Copy, PartialEq, Eq)]
 pub enum ReplicationTargetValidationError {
     RoleWithMultipleDestinations,
@@ -704,7 +722,7 @@ impl ReplicationConfigurationExt for ReplicationConfiguration {
 
             if let Some(filter) = &rule.filter {
                 let object_tags = ReplicationTagFilter::decode_tags_to_map(&obj.user_tags);
-                if filter.test_tags(&object_tags) {
+                if replication_filter_tags_match(filter, &object_tags) {
                     rules.push(rule.clone());
                 }
             } else {
@@ -1139,6 +1157,47 @@ mod tests {
         assert_eq!(validate_replication_config_structure(&structure_config(vec![rule])), Ok(()));
     }
 
+    #[test]
+    fn actionable_rules_require_every_and_tag_to_match() {
+        let mut rule = replication_rule("rule-1", "arn:target:a");
+        rule.filter = Some(s3s::dto::ReplicationRuleFilter {
+            and: Some(s3s::dto::ReplicationRuleAndOperator {
+                prefix: None,
+                tags: Some(vec![
+                    s3s::dto::Tag {
+                        key: Some("env".to_string()),
+                        value: Some("prod".to_string()),
+                    },
+                    s3s::dto::Tag {
+                        key: Some("tier".to_string()),
+                        value: Some("gold".to_string()),
+                    },
+                ]),
+            }),
+            ..Default::default()
+        });
+        let config = structure_config(vec![rule]);
+        let object = |user_tags: &str| ObjectOpts {
+            name: "object".to_string(),
+            user_tags: user_tags.to_string(),
+            ..Default::default()
+        };
+
+        assert!(config.filter_target_arns(&object("env=prod")).is_empty());
+        assert_eq!(config.filter_target_arns(&object("env=prod&tier=gold")), vec!["arn:target:a"]);
+        assert!(config.filter_target_arns(&object("")).is_empty());
+
+        let mut malformed = config;
+        malformed.rules[0].filter.as_mut().unwrap().and.as_mut().unwrap().tags = Some(vec![s3s::dto::Tag {
+            key: Some("env".to_string()),
+            value: None,
+        }]);
+        assert!(
+            malformed.filter_target_arns(&object("env=prod")).is_empty(),
+            "a malformed tag filter must fail closed"
+        );
+    }
+
     #[test]
     fn structure_validation_allows_tag_filter_when_delete_marker_replication_disabled() {
         let mut rule = replication_rule("rule-1", "arn:target:a");

crates/replication/src/stats.rs

@@ -580,6 +580,30 @@ impl FailStats {
         FailedMetric { count, size }
     }
 
+    /// Both rolling windows from one walk of the samples. `short` must be the
+    /// narrower window; the walk stops at `long`. Callers that need both (the
+    /// per-node site snapshot) would otherwise scan the deque twice while
+    /// holding the bucket-stats read lock, and the deque is only bounded by
+    /// the one-hour window - an unreachable target under load fills it.
+    pub fn recent_windows(&self, short: Duration, long: Duration) -> (FailedMetric, FailedMetric) {
+        let now = Instant::now();
+        let mut short_metric = FailedMetric::default();
+        let mut long_metric = FailedMetric::default();
+        for sample in self.recent.iter().rev() {
+            let age = now.duration_since(sample.observed_at);
+            if age > long {
+                break;
+            }
+            if age <= short {
+                short_metric.count += 1;
+                short_metric.size += sample.size;
+            }
+            long_metric.count += 1;
+            long_metric.size += sample.size;
+        }
+        (short_metric, long_metric)
+    }
+
     pub fn merge(&self, other: &FailStats) -> Self {
         Self {
             count: self.count.saturating_add(other.count),
@@ -912,6 +936,26 @@ mod tests {
         assert_eq!(last_hour.size, 96);
     }
 
+    #[test]
+    fn fail_stats_recent_windows_matches_two_separate_scans() {
+        let mut stats = FailStats::default();
+        stats.add_size(64, None::<&()>);
+        stats.add_size(32, None::<&()>);
+
+        let (minute, hour) = stats.recent_windows(Duration::from_secs(60), Duration::from_secs(60 * 60));
+        let expected_minute = stats.recent_since(Duration::from_secs(60));
+        let expected_hour = stats.recent_since(Duration::from_secs(60 * 60));
+
+        assert_eq!((minute.count, minute.size), (expected_minute.count, expected_minute.size));
+        assert_eq!((hour.count, hour.size), (expected_hour.count, expected_hour.size));
+        assert_eq!(minute.count, 2);
+        assert_eq!(hour.size, 96);
+
+        let empty = FailStats::default();
+        let (minute, hour) = empty.recent_windows(Duration::from_secs(60), Duration::from_secs(60 * 60));
+        assert_eq!((minute.count, minute.size, hour.count, hour.size), (0, 0, 0, 0));
+    }
+
     #[test]
     fn fail_stats_saturate_instead_of_wrapping() {
         let mut stats = FailStats {

crates/targets/src/store.rs

@@ -919,6 +919,22 @@ where
             }
         }
 
+        // The filename's item count is untrusted. Reject a payload that contains
+        // more items than advertised instead of returning success and allowing the
+        // caller to delete the entry with trailing events still in the file.
+        match deserializer.next() {
+            None => {}
+            Some(Ok(_)) => {
+                return Err(StoreError::Deserialization(format!(
+                    "Batch for key {key} contains more than {} items",
+                    key.item_count
+                )));
+            }
+            Some(Err(e)) => {
+                return Err(StoreError::Deserialization(format!("Failed to deserialize trailing batch item: {e}")));
+            }
+        }
+
         if items.is_empty() && key.item_count > 0 {
             return Err(StoreError::Deserialization("No items found".to_string()));
         }
@@ -1381,6 +1397,39 @@ mod tests {
         let _ = store.delete();
     }
 
+    #[test]
+    fn get_multiple_errors_on_batch_with_trailing_items_instead_of_partial_success() {
+        let dir = temp_store_dir("trailing-batch-items");
+        let store = QueueStore::<String>::new_with_compression(&dir, 8, ".test", false);
+        store.open().unwrap();
+
+        let items = vec!["aa".to_string(), "bb".to_string(), "cc".to_string()];
+        let original_key = store.put_multiple(items).unwrap();
+        assert_eq!(original_key.item_count, 3);
+
+        // Keep the three-item payload but make its filename claim that it contains
+        // only two items, simulating a corrupt or otherwise untrusted queue key.
+        let original_path = store.file_path(&original_key);
+        let advertised_key = Key {
+            item_count: 2,
+            ..original_key
+        };
+        let advertised_path = store.file_path(&advertised_key);
+        std::fs::rename(&original_path, &advertised_path).unwrap();
+
+        let err = store.get_multiple(&advertised_key).unwrap_err();
+        assert!(
+            matches!(err, StoreError::Deserialization(_)),
+            "expected Deserialization error, got {err:?}"
+        );
+
+        // Because get_multiple failed, the batch entry remains available for
+        // inspection or recovery instead of being silently discarded.
+        assert!(advertised_path.exists());
+
+        let _ = store.delete();
+    }
+
     #[test]
     fn concurrent_put_raw_respects_entry_limit() {
         let dir = temp_store_dir("concurrent-limit");

docs/README.md

@@ -0,0 +1,23 @@
+# Documentation
+
+Use the focused indexes rather than treating this directory as an unordered
+collection:
+
+- [Architecture knowledge base](architecture/README.md)
+- [Testing references](testing/README.md)
+
+## Operations
+
+Operational runbooks live under [`operations/`](operations/). Replication
+operators should start with:
+
+| Runbook | Use it for |
+|---|---|
+| [Site replication operations](operations/site-replication-operations.md) | Health fields, pending operations, outage recovery, re-pair admission, IAM/SSE boundaries, and upgrades. |
+| [Replication target check](operations/replication-check.md) | Validating an S3 destination and version fidelity before enabling replication. |
+| [Replication object size limits](operations/replication-object-size-limits.md) | Multipart routing, large-object limits, and retry characteristics. |
+| [Replication outbound transport](operations/replication-outbound-transport.md) | Integrity headers, generic target behavior, and transport knobs. |
+
+Other runbooks remain grouped by filename in [`operations/`](operations/);
+architecture pages link to the relevant runbook where a cross-boundary
+procedure is required.

docs/architecture/README.md

@@ -60,6 +60,8 @@ Required headings and strings in these files are asserted by `scripts/check_arch
 | [minio-rustfs-router-compatibility.md](minio-rustfs-router-compatibility.md) | a client or `mc` call that works against MinIO fails against RustFS and you need to know whether the endpoint is missing, stubbed, or deliberately different |
 | [minio-file-format-compat.md](minio-file-format-compat.md) | deciding whether a MinIO drive set, bucket-metadata blob, or SSE object can be read or imported by a given RustFS build, or before touching a listed version anchor |
 
-Operations runbooks live in [../operations/](../operations/) and testing references in [../testing/README.md](../testing/README.md).
+Operations runbooks are registered in the [documentation operations index](../README.md#operations), and testing references live in [../testing/README.md](../testing/README.md).
+
+For replication operations, start with [site replication operations](../operations/site-replication-operations.md), [replication target check](../operations/replication-check.md), [replication object size limits](../operations/replication-object-size-limits.md), and [replication outbound transport](../operations/replication-outbound-transport.md).
 
 For per-node HTTP failure ratios and cached storage probe provenance, see [S3 write failure diagnostics](../operations/s3-write-failure-diagnostics.md).

docs/architecture/s3-compatibility-matrix.md

@@ -38,6 +38,42 @@ Counts ignore blank lines and comments; compute them from the files. The lifecyc
 
 "Supported" for the SSE row means RustFS encrypts and decrypts its own objects. MinIO SSE objects (SSE-S3, SSE-KMS, SSE-C) are not readable in default builds; see [minio-file-format-compat.md Part C](minio-file-format-compat.md#part-c--server-side-encryption-sse) for the `rio-v2` migration build.
 
+## Replication Support Boundary
+
+Site replication and bucket replication are not the same compatibility claim.
+Site replication requires RustFS-compatible peer admin APIs and coordinates
+IAM, topology, buckets, and metadata. A generic S3-compatible service can only
+be a bucket-replication data target.
+
+For a generic S3 target, RustFS supports object PUT/HEAD/DELETE, multipart
+uploads, tags, version deletes, and Object Lock mutations when the target
+implements the corresponding S3 APIs and has versioning enabled. Targets that
+mint their own version IDs are supported through a per-target version ledger;
+pre-ledger replicas are adopted only when exact key and ETag identify one
+unambiguous target version. `NoSuchVersion` for an already absent addressed
+replica is treated as converged.
+
+The following are capability boundaries, not universal S3 claims:
+
+- `GET /BUCKET?replication-check` must pass the phases required by the intended
+  workload. `VersionFidelity` may report a minting target as mismatched even
+  though ledger-addressed delete and Object Lock phases succeed.
+- A target that rejects standard multipart constraints, required Object Lock
+  integrity headers, or the configured checksum framing is unsupported until
+  its transport settings are made compatible.
+- SSE-S3 and SSE-KMS are decrypted at the source and re-encrypted by the
+  destination's KMS. SSE-C uses ciphertext passthrough and requires target
+  evidence. Unsupported or ambiguous encryption metadata fails closed.
+- ACL authorization is intentionally unsupported, and generic targets never
+  receive RustFS IAM/site-control-plane state.
+- RustFS does not guess between multiple target versions with the same key and
+  ETag. The mutation remains failed and retryable until repair establishes an
+  unambiguous mapping.
+
+See [site replication operations](../operations/site-replication-operations.md)
+for health, recovery, and upgrade rules and [replication outbound transport](../operations/replication-outbound-transport.md)
+for the tested target classes and knobs.
+
 ## Not Yet Passing
 
 Standard S3 areas that must not be described as complete:

docs/operations/site-replication-operations.md

@@ -0,0 +1,258 @@
+# Site Replication Operations
+
+**Use this when:** operating a site-replication deployment, diagnosing a peer
+outage or incomplete topology change, pairing sites that already contain data,
+or planning an upgrade.
+
+**Source of truth:** `rustfs/src/admin/handlers/site_replication.rs`,
+`rustfs/src/site_replication/`, and the bucket-replication worker under
+`crates/ecstore/src/bucket/replication/`.
+
+Site replication combines two different convergence paths:
+
+- the control plane replicates buckets, bucket metadata, IAM, and topology;
+- ordinary bucket replication moves object versions and delete operations.
+
+An `enabled: true` response only says that a site has more than one configured
+peer. It does not prove that every peer is reachable or caught up. Always read
+`pendingOperation`, `retryStats`, `PeerErrors`, and `Metrics` as well.
+
+## Routine checks
+
+Run these commands from an admin workstation with one alias per site:
+
+```console
+mc admin replicate info site-a
+mc admin replicate status site-a
+```
+
+Check more than one site. A partition can leave each side with a different but
+locally valid view.
+
+`replicate info` is the compact control-plane view:
+
+| Field | Interpretation |
+|---|---|
+| `enabled` | More than one site is configured; this is not a health verdict. |
+| `sites` | The locally persisted topology. Compare deployment IDs and endpoints on every site. |
+| `retryStats.pending` | Collapsed peer deliveries waiting to be retried. |
+| `retryStats.failed` | Deliveries that crossed the escalation threshold and require attention. |
+| `retryStats.lastError` | A redacted summary of the most recent delivery failure. |
+| `pendingOperation` | A durable multi-step topology operation described below. Absence is the healthy steady state. |
+
+`replicate status` adds detailed convergence state:
+
+| Field | Interpretation |
+|---|---|
+| `Sites` / `PeerStates` | Configured peers and derived reachability/configuration state. |
+| `PeerErrors` | A peer could not be queried. Its detailed counters may be absent; do not read zeros as success. |
+| `BucketStats` | Per-bucket presence and versioning, replication, lifecycle, Object Lock, and metadata mismatches. |
+| `PolicyStats`, `UserStats`, `GroupStats` | IAM inventory mismatches. |
+| `RetryStats` | Durable control-plane retry backlog and escalation count. |
+| `Metrics.replMetrics` | Per-destination online state, downtime, replicated counts/bytes, and `failed` totals/windows. |
+| `Metrics.queued` / `Metrics.inProgress` | Object work waiting or active on the responding node. |
+| `Metrics.errors` | Node-level object-replication failures. When only queue statistics are available, RustFS synthesizes a node entry and preserves this counter rather than reporting zero. |
+| `Metrics.retries` | Redeliveries. Always zero today: a failed object is not retried by an event, it waits for the scanner pass described below. Read `errors` instead. |
+
+Healthy means: the same topology is visible on all sites, no pending operation,
+no peer error, no failed retry escalation, required bucket/IAM state is in sync,
+and queue/error counters are stable or falling. Counters are cumulative; alert on
+their rate and on a backlog that does not drain, not merely on a non-zero total.
+
+## Pending operations and recovery
+
+`pendingOperation` contains `operation`, an opaque `id`, `pendingPeers`, and
+`ackedPeers`. Do not edit the site-replication state object by hand. The marker
+is the crash-recovery journal and removing it can make a partially applied
+operation look complete.
+
+The heavyweight reconciler runs once at startup and every 600 seconds. The
+lightweight retry drain runs every 30 seconds. A restart is therefore a valid
+way to cause an immediate heavyweight pass after the underlying fault has been
+fixed, but it is not a substitute for fixing connectivity, credentials, TLS,
+or the remote endpoint.
+
+### `remove`
+
+The original topology and each peer acknowledgement are persisted before the
+operation finalizes. While peers remain in `pendingPeers`, restore access to
+them and wait for reconciliation. If a peer is permanently gone, a new remove
+request may remove all currently active unacknowledged peers; RustFS permits
+that request and then finalizes against the remaining topology. Removing the
+local site or all sites is also an explicit completion path.
+
+Do not re-add a site merely to hide this marker. First compare the topology on
+all reachable peers. If the same operation ID makes no progress for more than
+one heavyweight interval, collect `PeerErrors`, `RetryStats`, and the
+site-replication logs before retrying the remove.
+
+### `rotate-svc-acct`
+
+Service-account rotation keeps the candidate secrets and peer acknowledgements
+until every current remote peer accepts the rotation. Restore the failing peer
+and allow the reconciler to resume it. Do not manually delete either candidate
+credential during this window: doing so can remove the only credential that a
+not-yet-acknowledged peer accepts.
+
+After the marker clears, verify `replicate status` from every site, then retire
+any separately retained old credential material according to local policy.
+
+### `endpoint-refresh`
+
+An endpoint, CA, or TLS-verification edit first refreshes the replication
+target on every active peer and records acknowledgements. On startup and every
+heavyweight pass, RustFS probes peer capability, uses the endpoint-refresh API
+when supported (or the legacy peer-edit fallback), refreshes local bucket
+targets, and commits the edit only after every still-active peer acknowledges.
+
+If this marker is stuck:
+
+1. Confirm that the proposed endpoint and CA are correct and reachable from
+   every site, not only from the admin workstation.
+2. Restore the site-replication service account and TLS trust path.
+3. Wait for one 600-second pass or restart one healthy node to trigger the
+   startup pass.
+4. Re-run the identical edit only if the operation remains visible; a different
+   endpoint edit is rejected while the existing refresh is pending. The journal
+   pins the edit's payload, so a re-run without `--replicate-ilm-expiry` keeps
+   the value the first attempt recorded, and a re-run asking for a different
+   value is rejected. Finish or remove the pending refresh before changing it.
+
+A peer removed from the topology no longer blocks completion. A remove request
+is accepted when it removes every active unacknowledged peer.
+
+While this marker is present, control-plane retry replay to the other peers
+keeps running, but bucket wiring reconciliation waits: it rewrites the same
+targets the refresh is changing. Expect bucket-level drift on this site to
+persist until the refresh settles.
+
+## Outage recovery and convergence time
+
+Control-plane retry begins on the 30-second drain, while heavyweight snapshots,
+pending topology operations, and bucket wiring are revisited on the 600-second
+pass. Object MRF entries are persisted every 10 seconds by default and target
+health is probed every 5 seconds. These are scheduling bounds, not delivery
+SLAs: network timeouts and the amount of queued work add to them.
+
+Objects that must be rediscovered by the scanner have this conservative upper
+bound before discovery:
+
+```text
+RUSTFS_DATA_USAGE_UPDATE_DIR_CYCLES
+    × max(RUSTFS_SCANNER_CYCLE, actual duration of one scanner cycle)
+```
+
+The defaults re-descend a compacted directory every 16 cycles. A practical
+production starting point for a tighter recovery objective is
+`RUSTFS_DATA_USAGE_UPDATE_DIR_CYCLES=4`; `1` forces re-descent every cycle.
+Measure the additional disk and metadata load before lowering it further or
+tuning the scanner cadence. For an immediate operator-driven recovery, start a
+site resync with `mc admin replicate resync start` and monitor its status.
+Transfer time after discovery remains proportional to backlog size, bandwidth,
+worker capacity, and target latency. Use queue depth and the rate of
+`Metrics.errors` rather than the formula alone to decide whether convergence is
+progressing.
+
+## Pairing sites that already contain data
+
+When more than one requested site is non-empty, preflight considers each bucket
+name held by more than one site:
+
+- versioning must be `Enabled` on every site holding the shared bucket;
+- Object Lock enablement must be identical on every holder.
+
+A bucket present on only one site is safe: post-add backfill creates it on the
+other peers. A shared unversioned bucket is rejected because merging can
+overwrite the only copy of an object. An Object Lock mismatch is rejected
+because lock enablement cannot be changed after bucket creation and convergence
+could otherwise strip a WORM guarantee.
+
+If preflight rejects the pair, keep the authoritative copy, delete the
+conflicting bucket (or its contents) from all other sites, run `replicate add`
+again, and then start `replicate resync` from the surviving site. Back up and
+validate the authoritative data before deleting anything.
+
+## IAM convergence and repair boundary
+
+Ordinary IAM changes are delivered to each peer. A successful bulk IAM import
+also schedules one collapsed full-IAM snapshot per remote peer. A failed IAM
+deletion is replayed before that snapshot so the snapshot cannot re-create a
+principal or grant that was already revoked.
+
+The safety state has two bounds:
+
+- deletion high-water marks are retained for 30 days;
+- deletion replay bodies are capped at 256 distinct entities per peer.
+
+Repeated deletion of the same entity replaces its saved body. When the per-peer
+cap is exceeded or the body cannot be serialized, the retry entry remains
+escalated rather than pretending the deletion is replayable. An item from an
+older sender without a source timestamp cannot install the 30-day high-water
+mark, so verify it explicitly after a prolonged split. A successful drain
+clears replay bodies; removing the peer prunes its bodies. For an escalated IAM
+retry, use the site-replication repair workflow for the affected peer and IAM
+family, then verify users, service accounts, groups, policies, and mappings on
+both sides. Repair is the operator's explicit accountability transfer and
+clears the saved deletion bodies only after the IAM repair succeeds.
+
+A group's status converges in one direction. An explicit disable is applied
+everywhere, including through a snapshot, but a membership change never
+carries an enable - it would otherwise re-enable a group frozen on the
+receiving site. If a group ended up disabled on one site only, re-enable it
+there explicitly with `mc admin group enable`; a snapshot or repair will not
+do it.
+
+Treat IAM divergence as a security incident: a user deleted on one site can
+remain usable on an unreachable peer until replay or repair completes. A peer
+whose IAM entry is escalated does not receive scheduled snapshots either -
+including the one a bulk import schedules - until the repair settles it.
+
+## Encrypted objects
+
+| Source form | Replication behavior | Fail-closed condition |
+|---|---|---|
+| SSE-S3 | The source decrypts the object; the request sends only `AES256` intent; the destination encrypts with its own KMS. Source envelope material never leaves the site. | The destination cannot satisfy the encryption request, or the source metadata is incomplete/unsupported. The replica is `FAILED`; plaintext is not silently stored. |
+| SSE-KMS | The source decrypts the object; the request sends `aws:kms` intent without the source-local key ID; the destination selects its own configured KMS key. | Either side cannot decrypt/encrypt, or the metadata mixes incompatible encryption evidence. |
+| SSE-C | Stored ciphertext and the required SSE-C replication transport metadata pass through. RustFS verifies target evidence before accepting the replica. | The target does not echo the customer-algorithm evidence, required material/layout is absent, or the metadata is ambiguous. |
+
+Unknown MinIO/RustFS encryption markers are never forwarded as ordinary user
+metadata. They fail replication so an operator must migrate or repair the
+object with a supported format.
+
+## Rolling upgrades and rollback
+
+Keep every node in one site on the same version whenever possible. Upgrade all
+nodes of one site consecutively, verify its startup reconciliation and status,
+then move to the next site. Do not intentionally leave a site mixed-version:
+admin requests can land on different nodes, and an older node may not resume a
+new pending-operation shape or expose its health fields.
+
+Current state additions are optional and defaulted, so older readers ignore
+them. The target-version ledger is stored as dual-prefixed internal object
+metadata and is also ignored by older readers; rollback does not corrupt the
+object format, but older code loses the assigned-version routing improvement.
+
+Before rolling back across the fix that retains the data directory of a version
+awaiting purge replication (rustfs/rustfs#7307), ensure no version purge is
+pending. Older code can free that retained version's data directory before the
+remote purge is acknowledged, leaving unreadable metadata and blocking bucket
+deletion. Drain or repair replication and take a metadata/data backup first.
+
+## Runtime knobs
+
+These values are read when the owning background task starts. Restart the
+server after changing them. The millisecond intervals have a 10 ms floor;
+invalid values fall back to the default with a warning.
+
+| Variable | Default | Effect |
+|---|---:|---|
+| `RUSTFS_REPL_HEALTH_CHECK_INTERVAL_MS` | `5000` | Remote-target health probe interval. Lowering it increases outbound probes. |
+| `RUSTFS_REPL_MRF_FLUSH_INTERVAL_MS` | `10000` | Maximum periodic interval between MRF persistence flushes; 1,000 new entries also trigger a flush. |
+| `RUSTFS_REPL_RESYNC_POLL_MAX_MS` | `60000` | Upper bound for randomized resync retry-poll sleep. |
+| `RUSTFS_REPL_RESYNC_MAX_JOBS` | `2` | Concurrent resync jobs; values are bounded to `1..=32`. |
+
+Transport-specific controls and target behavior are documented in
+[Replication outbound transport](replication-outbound-transport.md). Validate a
+new destination with [Replication target check](replication-check.md), and read
+[Replication object size limits](replication-object-size-limits.md) before
+moving large objects.

docs/testing/ci-gates.md

@@ -3,7 +3,7 @@
 **Use this when:** a check is red and you need to know whether it blocks the merge, which workflow and job produced it, and how to reproduce it locally.
 **Source of truth:** the live `main` ruleset (command below) for required status; `.github/workflows/<file>.yml` for triggers, `paths`, `timeout-minutes`, and cron; `.config/nextest.toml` for e2e profile filters; `.github/scheduled-validations.json` for the freshness-watchdog list.
 
-A job blocks a merge only when its exact check name is in the live `main` ruleset. A workflow name, a `merge_group` trigger, or a red PR check does not make a job required by itself.
+A job blocks a merge when its exact check name is required by the live `main` ruleset, or when its result is required by the `Test and Lint` aggregate. A workflow name, a `merge_group` trigger, or an unrelated red PR check does not make a job required by itself.
 
 ## Required merge checks
 
@@ -13,9 +13,11 @@ The `main` ruleset (`6436880`) requires exactly these contexts, with `strict_req
 |---|---|---|
 | `CLA Check` | `cla.yml` | Contributor agreement |
 | `Quick Checks` | `ci.yml` job `quick-checks` | Formatting and repository guard scripts |
-| `Test and Lint` | `ci.yml` job `test-and-lint` | Clippy, workspace nextest (`ci` profile, excluding `e2e_test`), doctests, migration-gate count (`scripts/check_migration_gate_count.sh`) |
+| `Test and Lint` | `ci.yml` job `required-checks` | Exact expected results for every CI validation job, including workspace checks, critical E2E, feature lanes, and event-specific full suites |
 
-For PRs limited to the `paths-ignore` list in `ci.yml`, `ci-docs-only.yml` reports `Quick Checks` and `Test and Lint` under the same names; it runs the quick checks and `scripts/check_no_planning_docs.sh`, not a Rust build or tests. `scripts/check_ci_paths_sync.sh` keeps the two path lists aligned.
+Every PR enters `ci.yml`. The `classify-changes` job uses the base revision of `scripts/ci_gate.py` to select a conservative documentation-only path: root Markdown/licenses, `AGENTS.md`, Markdown under `docs/` or `.agents/skills/`, and documentation images. Unknown paths, unavailable Git history, an empty diff, or a missing base policy select the full matrix. Renames include their deleted source path. Documentation-only PRs still run Quick Checks and Typos; the aggregate requires the expensive jobs to be skipped exactly as selected.
+
+`required-checks` runs even after failed or skipped dependencies. `scripts/ci_gate.py verify` rejects missing jobs, unexpected jobs, failure, cancellation, and unexpected skips; optional lanes are required only on their declared events. `Workspace Test and Lint` is the ordinary Rust job, while `Test and Lint` uniquely names the aggregate. New validation jobs must update both its direct dependencies and the script contract. Test this wiring and its failure cases with `python3 scripts/ci_gate.py --self-test`.
 
 Verify the live rule before changing merge policy:
 
@@ -24,25 +26,25 @@ gh api repos/rustfs/rustfs/rulesets/6436880 \
   --jq '.rules[] | select(.type == "required_status_checks") | .parameters'
 ```
 
-Promotion rule: never promote a report-only lane to required from one green run. Require at least 14 days and 30 representative PRs with at least 99% complete execution, then update the ruleset and this file together.
+The aggregate requires the validation lanes already selected by `ci.yml`; this closes the gap where a failing critical lane left the required workspace check green. Independent workflows remain report-only unless separately required. Before adding a new expensive lane or moving existing PR coverage to a schedule, collect representative execution and regression evidence, establish ownership and a working scheduled replacement, and update this reference with the resulting policy.
 
 ## Pull request and merge matrix
 
-"Report-only" means visible and actionable but not in the required list. Budgets are each job's `timeout-minutes` in the named workflow and are not copied here.
+"Via aggregate" means a wrong result fails the required `Test and Lint` check. "Report-only" means visible and actionable but outside both the required list and aggregate. Budgets are each job's `timeout-minutes` in the named workflow and are not copied here.
 
 | Event | Check name | Workflow / job | Merge status | Reproduce |
 |---|---|---|---|---|
 | PR, non-doc change | `Quick Checks` | `ci.yml` `quick-checks` | Required | `make pre-commit` |
-| PR, non-doc change | `Test and Lint` | `ci.yml` `test-and-lint` | Required | `cargo clippy --all-targets -- -D warnings`; `cargo nextest run --profile ci --all --exclude e2e_test`; `cargo test --all --doc`; `scripts/check_migration_gate_count.sh` |
+| PR, non-doc change | `Workspace Test and Lint` | `ci.yml` `test-and-lint` | Via aggregate | `cargo clippy --all-targets -- -D warnings`; `cargo nextest run --profile ci --all --exclude e2e_test`; `cargo test --all --doc`; `scripts/check_migration_gate_count.sh` |
-| PR, non-doc change | `Typos` | `ci.yml` `typos` | Report-only | `typos` |
+| PR, non-doc change | `Typos` | `ci.yml` `typos` | Via aggregate | `typos` |
-| PR, non-doc change | `ILM Integration (serial)` | `ci.yml` `test-ilm-integration-serial` | Report-only | exact command in the job |
+| PR, non-doc change | `ILM Integration (serial)` | `ci.yml` `test-ilm-integration-serial` | Via aggregate | exact command in the job |
-| PR, non-doc change | `Test and Lint (rio-v2)`, `Test and Lint (swift)`, `Test and Lint (sftp)` | `ci.yml` `test-and-lint-rio-v2`, `test-and-lint-protocols` | Report-only | `cargo nextest run` with the job's `--features` |
+| PR, non-doc change | `Test and Lint (rio-v2)`, `Test and Lint (swift)`, `Test and Lint (sftp)` | `ci.yml` `test-and-lint-rio-v2`, `test-and-lint-protocols` | Via aggregate | `cargo nextest run` with the job's `--features` |
-| PR, non-doc change | `Connect Short Credential Boundary` | `ci.yml` `connect-short-credential-boundary` | Report-only | `cargo test -p rustfs --test connect_registration --features connect-e2e-short-credentials`; `cargo check -p rustfs --release --features connect-e2e-short-credentials` must fail |
+| PR, non-doc change | `Connect Short Credential Boundary` | `ci.yml` `connect-short-credential-boundary` | Via aggregate | `cargo test -p rustfs --test connect_registration --features connect-e2e-short-credentials`; `cargo check -p rustfs --release --features connect-e2e-short-credentials` must fail |
-| PR, non-doc change | `Build RustFS Debug Binary` | `ci.yml` `build-rustfs-debug-binary` | Report-only; prerequisite for the black-box jobs | `cargo build -p rustfs --bins` |
+| PR, non-doc change | `Build RustFS Debug Binary` | `ci.yml` `build-rustfs-debug-binary` | Via aggregate; prerequisite for black-box jobs | `cargo build -p rustfs --bins --features e2e-test-hooks` |
-| PR, non-doc change | `io_uring Integration (real)` | `ci.yml` `uring-integration` | Report-only | `cargo test -p rustfs-ecstore --lib uring_ -- --test-threads=1 --nocapture` |
+| PR, non-doc change | `io_uring Integration (real)` | `ci.yml` `uring-integration` | Via aggregate | `cargo test -p rustfs-ecstore --lib uring_ -- --test-threads=1 --nocapture` |
-| PR, non-doc change | `End-to-End Tests` | `ci.yml` `e2e-tests` | Report-only | `cargo nextest run --profile e2e-smoke -p e2e_test`, then `./scripts/e2e-run.sh ./target/debug/rustfs <data-dir>`; membership guards `scripts/check_test_wiring.py --check-profile e2e-smoke <listing.json>` and `scripts/check_security_smoke_count.sh check <listing.json>` |
+| PR, non-doc change | `End-to-End Tests` | `ci.yml` `e2e-tests` | Via aggregate | `cargo nextest run --profile e2e-smoke -p e2e_test`, then `./scripts/e2e-run.sh ./target/debug/rustfs <data-dir>`; membership guards `scripts/check_test_wiring.py --check-profile e2e-smoke <listing.json>` and `scripts/check_security_smoke_count.sh check <listing.json>` |
-| PR, non-doc change | `S3 Implemented Tests` | `ci.yml` `s3-implemented-tests` | Report-only | build `rustfs`, then `scripts/s3-tests/run.sh` with the job's `DEPLOY_MODE` / `TEST_MODE` / `MAXFAIL` env |
+| PR, non-doc change | `S3 Implemented Tests` | `ci.yml` `s3-implemented-tests` | Via aggregate | build `rustfs`, then `scripts/s3-tests/run.sh` with the job's `DEPLOY_MODE` / `TEST_MODE` / `MAXFAIL` env |
-| PR, non-doc change | `S3 Lifecycle Behavior Tests` | `ci.yml` `s3-lifecycle-behavior-tests` | Report-only | `scripts/s3-tests/run.sh` with the job's accelerated-scanner env |
+| PR, non-doc change | `S3 Lifecycle Behavior Tests` | `ci.yml` `s3-lifecycle-behavior-tests` | Via aggregate | `scripts/s3-tests/run.sh` with the job's accelerated-scanner env |
 | PR touching `paths` in `audit.yml` | `Cargo Deny`, `Workflow Pin Report`, `Dependency Review` | `audit.yml` `cargo-deny`, `workflow-pin-report`, `dependency-review` | Report-only | `cargo deny check`; `scripts/security/check_workflow_pins.sh` |
 | PR touching `paths` in `architecture-migration-rules.yml` | `Architecture Migration Rules` | `architecture-migration-rules.yml` `architecture-migration-rules` | Report-only | `scripts/check_architecture_migration_rules.sh` |
 | PR touching `paths` in `nix.yml` | `Nix Build & Check` | `nix.yml` `nix-validation` | Report-only | `nix flake check` |
@@ -52,8 +54,8 @@ Promotion rule: never promote a report-only lane to required from one green run.
 | PR touching `paths` in `e2e-upgrade.yml` | `Direct upgrade from the previous release`, `Mixed-version rolling upgrade from the previous release`, `Bucket configuration survives the upgrade`, `Rollback reads current bucket metadata` | `e2e-upgrade.yml` `upgrade` matrix | Report-only | the `cargo test --locked -p e2e_test` command in the job with `RUSTFS_UPGRADE_SOURCE_BINARY` pointing at the pinned previous release (`UPGRADE_SOURCE_VERSION`) |
 | PR touching `paths` in `oidc-keycloak.yml` | `OIDC Keycloak live gate` | `oidc-keycloak.yml` `oidc-keycloak-live` | Report-only | `cargo build --locked -p rustfs --bin rustfs`, then `bash scripts/test/oidc_keycloak_live.sh ./target/debug/rustfs` |
 | PR touching `paths` in `targets-integration.yml` | `PostgreSQL, MySQL, AMQP, and NATS` | `targets-integration.yml` `targets-live` | Report-only | start the containers as in the job, export the `RUSTFS_TEST_*` DSNs, then the job's `cargo test --locked -p rustfs-targets --test <name> -- --ignored --test-threads=1` commands |
-| PR limited to main-CI-excluded paths | `Quick Checks`, `Test and Lint` | `ci-docs-only.yml` `quick-checks`, `test-and-lint` | Required | `git diff --check`; `make doc-paths-check`; `scripts/check_no_planning_docs.sh` |
+| PR, documentation-only selection | `Quick Checks`, `Typos`, `Test and Lint` | `ci.yml` `quick-checks`, `typos`, `required-checks` | Required directly or via aggregate | Quick Checks commands; `python3 scripts/ci_gate.py --self-test` |
-| `merge_group`; push to `main` | `End-to-End Tests (full merge gate)` | `ci.yml` `e2e-full` | Report-only | `cargo nextest run --profile e2e-full -p e2e_test` |
+| `merge_group`; push to `main` | `End-to-End Tests (full merge gate)` | `ci.yml` `e2e-full` | Via aggregate on these events | `cargo nextest run --profile e2e-full -p e2e_test` |
 
 e2e filters live in `.config/nextest.toml`; extend a profile instead of adding a second selector. Before a profile runs, `scripts/check_test_wiring.py` compares its listing to the committed digest in `.config/e2e-<profile>-selection.txt`, so a silent test drop fails closed.
 
@@ -67,11 +69,11 @@ the serialized cluster fault-domain suites for scheduled soak signal.
 
 ## Scheduled validation
 
-Scheduled lanes never block a PR. Their workflow-local gate fails the run, scheduled failures route to the shared failure-issue action, and `scheduled-validation-freshness.yml` fails when a workflow listed in `.github/scheduled-validations.json` has not run within its `max_age_hours` (a `never_ran_grace_until` entry covers the window before a newly enabled cron's first slot). Cadence is qualitative here; the cron lives in each workflow's `on.schedule`.
+Scheduled lanes never block a PR. Their workflow-local gate fails the run, scheduled failures route to the shared failure-issue action, and `scheduled-validation-freshness.yml` fails when a workflow listed in `.github/scheduled-validations.json` has no recent attempt or completed successful scheduled run within its `max_age_hours` (a `never_ran_grace_until` entry covers the window before a newly enabled cron's first slot). Cadence is qualitative here; the cron lives in each workflow's `on.schedule`.
 
 | Workflow (cadence) | Jobs | Verdict and artifacts | In freshness list | Reproduce |
 |---|---|---|---|---|
-| `ci.yml` (weekly) | full matrix, including the schedule/dispatch-only rio-v2 jobs `build-rustfs-debug-binary-rio-v2` and `e2e-tests-rio-v2` | per-job | yes | dispatch `ci.yml` |
+| `ci.yml` (weekly) | full matrix, including the schedule/dispatch-only rio-v2 jobs `build-rustfs-debug-binary-rio-v2` and `e2e-tests-rio-v2` | strict aggregate; the full E2E lane runs on dispatch, merge groups, and main pushes | yes | dispatch `ci.yml` |
 | `build.yml` (weekly) | `build-rustfs` over the six-target platform matrix in `prepare-platform-matrix` (four Linux, macOS aarch64, Windows x86_64) | build/package integrity | yes | dispatch `build.yml` with an exact platform set |
 | `e2e-replication-nightly.yml` (nightly) | `repl-nightly`, `cluster-nightly`, `protocols-nightly` | three independent gates; JUnit, membership listing, server logs | yes | `cargo nextest run --profile e2e-repl-nightly -p e2e_test`; `--profile e2e-nightly`; `-j 1 --profile e2e-protocols` |
 | `e2e-distributed.yml` (storage-sensitive PRs + nightly) | `distributed` | fail-closed 4-node 4-disk S3, durability, replication, movement, fault, and direct/rolling upgrade gate; JUnit, membership listing, per-node server logs | yes, with `never_ran_grace_until` | download the pinned previous release as in the workflow, export `RUSTFS_UPGRADE_SOURCE_BINARY`, then `cargo nextest run --profile e2e-distributed -p e2e_test` |
@@ -88,7 +90,7 @@ Scheduled lanes never block a PR. Their workflow-local gate fails the run, sched
 | `e2e-upgrade.yml` (weekly) | `upgrade` (4-case matrix) | upgrade and rollback gate; server logs | no | see the PR row |
 | `oidc-keycloak.yml` (weekly) | `oidc-keycloak-live` | live OIDC gate | no | see the PR row |
 | `targets-integration.yml` (nightly) | `targets-live` | live target gate; container logs | no | see the PR row |
-| `scheduled-validation-freshness.yml` (nightly) | `check-freshness` | fails on a never-created or stale schedule | n/a | dispatch |
+| `scheduled-validation-freshness.yml` (nightly) | `check-freshness` | fails on missing or stale attempts or completed successes | n/a | dispatch |
 
 Manual `workflow_dispatch` runs are debugging evidence and do not open scheduled-failure issues. A manual performance run may explicitly allow a known regression; that override is not a passing baseline.
 

rustfs/src/admin/handlers/replication.rs

@@ -627,6 +627,32 @@ pub(crate) async fn cluster_replication_stats(bucket: &str, context: Option<Arc<
         .await
 }
 
+/// Reload the bucket's metadata on every peer so a follow-up
+/// `put-bucket-replication` on another node does not read a stale target.
+///
+/// Best effort, like every S3 bucket-config write path
+/// (`app::bucket_usecase::notify_bucket_metadata_reload`): the target is
+/// already persisted and live on this node, and the 15-minute refresh closes
+/// the gap, so a peer that cannot be reached must not turn a completed write
+/// into a failed request.
+async fn notify_remote_target_metadata_reload(bucket: &str, context: Option<Arc<AppContext>>, action: &'static str) {
+    let Some(notification_system) = current_notification_system_for_context(context.as_deref()) else {
+        return;
+    };
+    if let Err(err) = notification_system.load_bucket_metadata(bucket).await {
+        warn!(
+            event = EVENT_ADMIN_REMOTE_TARGET_STATE,
+            component = LOG_COMPONENT_ADMIN,
+            subsystem = LOG_SUBSYSTEM_REPLICATION,
+            action = action,
+            result = "peer_metadata_reload_failed",
+            bucket = %bucket,
+            error = ?err,
+            "admin remote target state"
+        );
+    }
+}
+
 fn unique_replication_peers(peer_clients: &[Option<PeerRestClient>]) -> (Vec<&PeerRestClient>, u32) {
     let mut seen_grid_hosts = HashSet::new();
     let peers: Vec<_> = peer_clients
@@ -699,6 +725,7 @@ pub struct SetRemoteTargetHandler {}
 impl Operation for SetRemoteTargetHandler {
     async fn call(&self, req: S3Request<Body>, _params: Params<'_, '_>) -> S3Result<S3Response<(StatusCode, Body)>> {
         let cred = validate_replication_admin_request(&req, AdminAction::SetBucketTargetAction).await?;
+        let app_context = app_context_from_req(&req);
 
         let queries = extract_query_params(&req.uri);
 
@@ -926,6 +953,8 @@ impl Operation for SetRemoteTargetHandler {
             .map_err(map_bucket_target_error)?;
         let _targets_guard = lock_bucket_targets_metadata(bucket).await;
         let arn = persist_remote_target_write(bucket, remote_target, incarnation, mode).await?;
+        drop(_targets_guard);
+        notify_remote_target_metadata_reload(bucket, app_context, "set_remote_target").await;
         let arn_str = serde_json::to_string(&arn)
             .map_err(|_| S3Error::with_message(S3ErrorCode::InternalError, "Failed to serialize target ARN"))?;
 
@@ -1006,6 +1035,7 @@ pub struct RemoveRemoteTargetHandler {}
 impl Operation for RemoveRemoteTargetHandler {
     async fn call(&self, req: S3Request<Body>, _params: Params<'_, '_>) -> S3Result<S3Response<(StatusCode, Body)>> {
         validate_replication_admin_request(&req, AdminAction::SetBucketTargetAction).await?;
+        let app_context = app_context_from_req(&req);
 
         debug!("remove remote target called");
         let queries = extract_query_params(&req.uri);
@@ -1081,6 +1111,7 @@ impl Operation for RemoveRemoteTargetHandler {
         }
         let json_targets = serde_json::to_vec(&targets)
             .map_err(|_| S3Error::with_message(S3ErrorCode::InternalError, "Failed to serialize targets"))?;
+        let notification_bucket = bucket.clone();
         let bucket = bucket.clone();
         let arn = arn_str.clone();
         // The pool cancellation owns a detached task. Both outer guards must
@@ -1101,6 +1132,8 @@ impl Operation for RemoveRemoteTargetHandler {
             S3Error::with_message(S3ErrorCode::InternalError, format!("remote target removal task failed: {error}"))
         })??;
 
+        notify_remote_target_metadata_reload(&notification_bucket, app_context, "remove_remote_target").await;
+
         Ok(S3Response::new((StatusCode::NO_CONTENT, Body::from("".to_string()))))
     }
 }
@@ -1787,6 +1820,25 @@ mod tests {
         pairs.iter().map(|(k, v)| (k.to_string(), v.to_string())).collect()
     }
 
+    #[test]
+    fn remote_target_writes_notify_peer_metadata_caches() {
+        let source = include_str!("replication.rs");
+        for (start, end) in [
+            ("impl Operation for SetRemoteTargetHandler", "pub struct ListRemoteTargetHandler"),
+            ("impl Operation for RemoveRemoteTargetHandler", "async fn cancel_active_resync_intent"),
+        ] {
+            let body = source
+                .split(start)
+                .nth(1)
+                .and_then(|rest| rest.split(end).next())
+                .expect(start);
+            assert!(
+                body.contains("notify_remote_target_metadata_reload"),
+                "{start} must notify every node before returning success"
+            );
+        }
+    }
+
     #[test]
     fn update_ops_parse_minio_query_contract() {
         let ops = parse_remote_target_update_ops(&query_map(&[

rustfs/src/admin/handlers/user.rs

@@ -1318,6 +1318,24 @@ impl Operation for ImportIam {
             failed,
         };
 
+        // The entities are already imported locally. A snapshot that cannot be
+        // scheduled is a convergence delay the reconcile pass still closes, so
+        // it must not turn a completed import into a failed request - the same
+        // best-effort contract every other site-replication hook here follows.
+        if let Err(err) =
+            crate::site_replication::enqueue_site_replication_iam_snapshot("iam import scheduled a full snapshot").await
+        {
+            warn!(
+                component = LOG_COMPONENT_ADMIN,
+                subsystem = LOG_SUBSYSTEM_USER,
+                event = EVENT_ADMIN_USER_STATE,
+                action = "import_iam",
+                result = "site_replication_snapshot_not_scheduled",
+                error = ?err,
+                "admin user state"
+            );
+        }
+
         let body = serde_json::to_vec(&ret).map_err(|e| S3Error::with_message(S3ErrorCode::InternalError, e.to_string()))?;
 
         let mut header = HeaderMap::new();
@@ -1424,6 +1442,16 @@ mod tests {
         assert!(include_str!("user.rs").contains(mapper_call));
     }
 
+    #[test]
+    fn import_iam_enqueues_a_site_replication_snapshot() {
+        let body = source_block(include_str!("user.rs"), "impl Operation for ImportIam");
+
+        assert!(
+            body.contains("enqueue_site_replication_iam_snapshot"),
+            "a successful IAM import must schedule a full IAM snapshot for every remote site"
+        );
+    }
+
     #[test]
     fn test_should_check_deny_only_for_regular_self_request() {
         let cred = Credentials {

rustfs/src/admin/replication_metrics_wire.rs

@@ -409,6 +409,26 @@ fn transfer_summaries(stats: &InternalReplicationStats) -> (XferSummaryWire, Tar
     (summary, per_target)
 }
 
+/// Node-level failure counters for `errors`. The sibling `retries` field
+/// stays zero on purpose: it means redeliveries in the minio-go shape, and a
+/// failed object is not retried by an event today (it waits for the scanner's
+/// heal pass), so reporting failures there would claim a redelivery that
+/// never happened.
+fn failure_counters(stats: &InternalReplicationStats) -> CounterSummaryWire {
+    let (total, last1m, last1hr) = stats.stats.values().fold((0i64, 0i64, 0i64), |acc, stat| {
+        (
+            acc.0.saturating_add(stat.fail_stats.count),
+            acc.1.saturating_add(stat.fail_stats.last_minute.count),
+            acc.2.saturating_add(stat.fail_stats.last_hour.count),
+        )
+    });
+    CounterSummaryWire {
+        total: u64::try_from(total.max(0)).unwrap_or_default(),
+        last1m: u64::try_from(last1m.max(0)).unwrap_or_default(),
+        last1hr: u64::try_from(last1hr.max(0)).unwrap_or_default(),
+    }
+}
+
 impl MetricsV2Wire {
     /// Project the aggregated internal stats onto the `MetricsV2` shape.
     ///
@@ -418,6 +438,7 @@ impl MetricsV2Wire {
     /// `queueStats.nodes` and treats an empty list as "no data".
     pub(crate) fn from_stats(bucket_stats: &BucketStats, node_name: &str) -> Self {
         let (xfer_stats, tgt_xfer_stats) = transfer_summaries(&bucket_stats.replication_stats);
+        let failed = failure_counters(&bucket_stats.replication_stats);
         let mut nodes: Vec<ReplQNodeStatsWire> = bucket_stats
             .queue_stats
             .nodes
@@ -436,6 +457,7 @@ impl MetricsV2Wire {
                 q_stats: InQueueMetricWire::from(&bucket_stats.replication_stats.q_stat),
                 xfer_stats: xfer_stats.clone(),
                 tgt_xfer_stats: tgt_xfer_stats.clone(),
+                errors: failed,
                 ..Default::default()
             });
         } else {
@@ -444,6 +466,7 @@ impl MetricsV2Wire {
             if let Some(first) = nodes.first_mut() {
                 first.xfer_stats = xfer_stats.clone();
                 first.tgt_xfer_stats = tgt_xfer_stats.clone();
+                first.errors = failed;
             }
         }
 
@@ -478,6 +501,12 @@ mod tests {
         target.replicated_size = 4096;
         target.failed.count = 3;
         target.failed.size = 900;
+        target.fail_stats.count = 3;
+        target.fail_stats.size = 900;
+        target.fail_stats.last_minute.count = 2;
+        target.fail_stats.last_minute.size = 600;
+        target.fail_stats.last_hour.count = 3;
+        target.fail_stats.last_hour.size = 900;
         target.bandwidth_limit_bytes_per_sec = 1024;
         target.current_bandwidth_bytes_per_sec = 512.5;
         stats
@@ -537,6 +566,10 @@ mod tests {
         assert_eq!(node["queueStats"]["peak"], node["queueStats"]["max"]);
         assert!(node["activeWorkers"].get("curr").is_some());
         assert!(node["transferSummary"].get("Total").is_some());
+        assert_eq!(node["errors"]["total"], 3);
+        assert_eq!(node["errors"]["last1m"], 2);
+        assert_eq!(node["errors"]["last1hr"], 3);
+        assert_eq!(node["retries"]["total"], 0, "failures are not redeliveries; retries must not claim one");
         assert_eq!(json["downtimeInfo"], serde_json::json!({}));
     }
 

rustfs/src/site_replication/retry.rs

@@ -217,6 +217,26 @@ pub(crate) fn settle_observed_site_replication_retry_event(
     before.saturating_sub(queue.len())
 }
 
+/// Make sure `peer` has a collapsed entry for `path` without counting the
+/// call as a delivery failure. A bulk local mutation (`import-iam`) needs the
+/// entry to exist so the next drain sends the snapshot; routing it through
+/// [`upsert_site_replication_retry_event`] would raise `retry_count` on every
+/// import and escalate a healthy peer to `failed` after
+/// [`SITE_REPLICATION_RETRY_FAILED_AFTER`] of them, with the scheduling note
+/// shown to operators as `lastError`.
+pub(crate) fn ensure_site_replication_retry_event(
+    queue: &mut Vec<SiteReplicationRetryEvent>,
+    peer: &PeerInfo,
+    path: &str,
+    reason: &str,
+) -> S3Result<Vec<SiteReplicationRetryEvent>> {
+    let path = collapsed_retry_queue_path(path).unwrap_or(path);
+    if queue.iter().any(|event| retry_event_matches(event, peer, path)) {
+        return Ok(Vec::new());
+    }
+    push_site_replication_retry_event(queue, peer, path, summarize_peer_error_detail(reason), false, None)
+}
+
 pub(crate) fn upsert_site_replication_retry_event(
     queue: &mut Vec<SiteReplicationRetryEvent>,
     peer: &PeerInfo,
@@ -244,6 +264,17 @@ pub(crate) fn upsert_site_replication_retry_event(
         return Ok(Vec::new());
     }
 
+    push_site_replication_retry_event(queue, peer, path, detail, peer_unreachable, generation)
+}
+
+fn push_site_replication_retry_event(
+    queue: &mut Vec<SiteReplicationRetryEvent>,
+    peer: &PeerInfo,
+    path: &str,
+    detail: String,
+    peer_unreachable: bool,
+    generation: Option<u64>,
+) -> S3Result<Vec<SiteReplicationRetryEvent>> {
     let slots_needed = queue
         .len()
         .saturating_add(1)
@@ -274,7 +305,7 @@ pub(crate) fn upsert_site_replication_retry_event(
         retry_count: 1,
         failed: false,
         last_error: detail,
-        updated_at: Some(now),
+        updated_at: Some(OffsetDateTime::now_utc()),
         edit_generation: generation,
         peer_unreachable,
         deletions_recorded: false,
@@ -365,6 +396,60 @@ pub(crate) async fn enqueue_site_replication_retry_event_for_generation(
     }
 }
 
+/// Returns the number of peers whose snapshot entry is escalated and therefore
+/// will not carry this scheduling: the marker records a deletion that a
+/// snapshot cannot replay, and only a repair settles it, so clearing it to make
+/// the entry drainable again would drop that liability.
+pub(crate) fn record_iam_snapshot_retries(
+    state: &mut SiteReplicationState,
+    local_peer: &PeerInfo,
+    reason: &str,
+) -> S3Result<usize> {
+    let peers = state
+        .peers
+        .values()
+        .filter(|peer| {
+            peer.deployment_id != local_peer.deployment_id && !same_identity_endpoint(&peer.endpoint, &local_peer.endpoint)
+        })
+        .cloned()
+        .collect::<Vec<_>>();
+    let mut escalated = 0usize;
+    for peer in peers {
+        if state.retry_queue.iter().any(|event| {
+            retry_event_matches(event, &peer, SITE_REPLICATION_RETRY_IAM_SNAPSHOT_PATH)
+                && event.last_error == SITE_REPLICATION_RETRY_SNAPSHOT_REPLAYED_MARKER
+        }) {
+            escalated += 1;
+            continue;
+        }
+        ensure_site_replication_retry_event(&mut state.retry_queue, &peer, SITE_REPLICATION_RETRY_IAM_SNAPSHOT_PATH, reason)?;
+    }
+    Ok(escalated)
+}
+
+/// Schedule one collapsed full-IAM snapshot per remote peer after a bulk
+/// local mutation such as `import-iam`.
+pub(crate) async fn enqueue_site_replication_iam_snapshot(reason: &str) -> S3Result<()> {
+    let state = load_site_replication_state().await?;
+    if !state.enabled() {
+        return Ok(());
+    }
+    let local_peer = current_local_runtime_peer(&state);
+    let reason = reason.to_string();
+    let escalated = update_site_replication_state(move |state| record_iam_snapshot_retries(state, &local_peer, &reason)).await?;
+    if escalated > 0 {
+        warn!(
+            component = LOG_COMPONENT_ADMIN,
+            subsystem = LOG_SUBSYSTEM_SITE_REPLICATION,
+            event = EVENT_ADMIN_SITE_REPLICATION_STATE,
+            escalated,
+            result = "iam_snapshot_not_scheduled_for_escalated_peer",
+            "site replication peers hold an escalated IAM entry; the snapshot waits for a repair"
+        );
+    }
+    Ok(())
+}
+
 pub(crate) const SITE_REPLICATION_PEER_IAM_ITEM_WIRE_PATH: &str = "/rustfs/admin/v3/site-replication/peer/iam-item";
 
 /// Per-peer cap on recorded deletion bodies. Beyond it the peer's collapsed

rustfs/src/site_replication/state.rs

@@ -168,6 +168,8 @@ mod rfc3339_map {
 pub(crate) struct PendingEndpointRefresh {
     pub(crate) id: String,
     pub(crate) peer: PeerInfo,
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub(crate) ilm_expiry_override: Option<bool>,
     #[serde(default, skip_serializing_if = "BTreeMap::is_empty")]
     pub(crate) remote_peers: BTreeMap<String, PeerInfo>,
     #[serde(default, skip_serializing_if = "BTreeSet::is_empty")]

rustfs/src/site_replication/tests.rs

@@ -693,6 +693,122 @@ fn test_record_iam_deletion_marks_newest_wins_and_expires_by_age_only() {
     );
 }
 
+/// Scheduling a snapshot is not a delivery failure. Repeated imports - the
+/// normal way a bulk IAM migration is done, one archive at a time - must not
+/// walk the peer's entry up to the escalation threshold and report a healthy
+/// site as `retryStats.failed` with the scheduling note as its `lastError`.
+#[test]
+fn repeated_iam_import_snapshots_do_not_escalate_a_healthy_peer() {
+    let local = PeerInfo {
+        deployment_id: "local-dep".to_string(),
+        ..peer("local", "https://local.example.com")
+    };
+    let remote = PeerInfo {
+        deployment_id: "remote-a".to_string(),
+        ..peer("remote-a", "https://a.example.com")
+    };
+    let mut state = SiteReplicationState {
+        peers: BTreeMap::from([
+            (local.deployment_id.clone(), local.clone()),
+            (remote.deployment_id.clone(), remote),
+        ]),
+        ..Default::default()
+    };
+
+    for _ in 0..(SITE_REPLICATION_RETRY_FAILED_AFTER + 2) {
+        record_iam_snapshot_retries(&mut state, &local, "iam import scheduled a full snapshot").expect("record snapshot");
+    }
+
+    assert_eq!(state.retry_queue.len(), 1);
+    let event = &state.retry_queue[0];
+    assert_eq!(event.retry_count, 1, "a schedule must not count as a delivery attempt");
+    assert!(!event.failed, "a scheduled snapshot must not report as an escalated failure");
+}
+
+/// An escalated entry records a deletion a snapshot cannot replay: only a
+/// repair settles it. Scheduling an import snapshot must not clear that
+/// marker to make the entry drainable again, and the peer it skips has to be
+/// reported rather than silently left behind.
+#[test]
+fn an_escalated_peer_keeps_its_marker_and_is_reported() {
+    let local = PeerInfo {
+        deployment_id: "local-dep".to_string(),
+        ..peer("local", "https://local.example.com")
+    };
+    let remote = PeerInfo {
+        deployment_id: "remote-a".to_string(),
+        ..peer("remote-a", "https://a.example.com")
+    };
+    let mut state = SiteReplicationState {
+        peers: BTreeMap::from([
+            (local.deployment_id.clone(), local.clone()),
+            (remote.deployment_id.clone(), remote.clone()),
+        ]),
+        retry_queue: vec![SiteReplicationRetryEvent {
+            id: "escalated".to_string(),
+            peer_deployment_id: remote.deployment_id.clone(),
+            peer_endpoint: remote.endpoint,
+            path: SITE_REPLICATION_RETRY_IAM_SNAPSHOT_PATH.to_string(),
+            retry_count: SITE_REPLICATION_RETRY_FAILED_AFTER,
+            failed: true,
+            last_error: SITE_REPLICATION_RETRY_SNAPSHOT_REPLAYED_MARKER.to_string(),
+            deletions_recorded: true,
+            ..Default::default()
+        }],
+        ..Default::default()
+    };
+
+    let escalated =
+        record_iam_snapshot_retries(&mut state, &local, "iam import scheduled a full snapshot").expect("record snapshot retries");
+
+    assert_eq!(escalated, 1);
+    assert_eq!(state.retry_queue.len(), 1);
+    assert_eq!(
+        state.retry_queue[0].last_error, SITE_REPLICATION_RETRY_SNAPSHOT_REPLAYED_MARKER,
+        "the unreplayable-deletion marker must survive a snapshot schedule"
+    );
+}
+
+#[test]
+fn iam_import_snapshot_retry_is_recorded_once_per_remote_peer() {
+    let local = PeerInfo {
+        deployment_id: "local-dep".to_string(),
+        ..peer("local", "https://local.example.com")
+    };
+    let remote_a = PeerInfo {
+        deployment_id: "remote-a".to_string(),
+        ..peer("remote-a", "https://a.example.com")
+    };
+    let remote_b = PeerInfo {
+        deployment_id: "remote-b".to_string(),
+        ..peer("remote-b", "https://b.example.com")
+    };
+    let mut state = SiteReplicationState {
+        peers: BTreeMap::from([
+            (local.deployment_id.clone(), local.clone()),
+            (remote_a.deployment_id.clone(), remote_a),
+            (remote_b.deployment_id.clone(), remote_b),
+        ]),
+        ..Default::default()
+    };
+
+    record_iam_snapshot_retries(&mut state, &local, "IAM import snapshot pending").expect("record snapshot retries");
+
+    assert_eq!(state.retry_queue.len(), 2);
+    assert!(
+        state
+            .retry_queue
+            .iter()
+            .all(|event| event.path == SITE_REPLICATION_RETRY_IAM_SNAPSHOT_PATH)
+    );
+    assert!(
+        state
+            .retry_queue
+            .iter()
+            .all(|event| event.peer_deployment_id != local.deployment_id)
+    );
+}
+
 /// A failed deletion delivery persists a replay record next to the collapsed
 /// retry entry; a fresh entry is stamped `deletions_recorded` so a later
 /// replay can settle it, and a repeated deletion of the same entity keeps the

rustfs/src/storage/storage_api.rs

@@ -17,6 +17,7 @@
 use std::collections::hash_map::DefaultHasher;
 use std::hash::{Hash, Hasher};
 use std::sync::{Arc, LazyLock};
+use std::time::Duration;
 
 use rand::RngExt as _;
 use rustfs_storage_api as storage_contracts;
@@ -836,6 +837,39 @@ impl StorageReplicationStatsHandle {
 
     pub(crate) async fn site_metrics_snapshot(&self) -> ReplicationSiteMetricsSnapshot {
         let metrics = self.inner.get_sr_metrics_for_node().await;
+        // Aggregate under the read lock rather than through `get_all`: that
+        // clones every bucket's stats, and `FailStats.recent` is bounded only
+        // by the one-hour window, so an unreachable target under load - the
+        // very case an operator polls this for - makes the copy large. The
+        // windows come from the live samples; the serialized `last_minute` /
+        // `last_hour` snapshots are stamped onto per-bucket clones elsewhere
+        // and stay zero in this node-local cache.
+        let (
+            failed_count,
+            failed_bytes,
+            failed_last_minute_count,
+            failed_last_minute_bytes,
+            failed_last_hour_count,
+            failed_last_hour_bytes,
+        ) = {
+            let cache = self.inner.cache.read().await;
+            cache
+                .values()
+                .flat_map(|bucket| bucket.stats.values())
+                .fold((0i64, 0i64, 0i64, 0i64, 0i64, 0i64), |totals, stat| {
+                    let (minute, hour) = stat
+                        .fail_stats
+                        .recent_windows(Duration::from_secs(60), Duration::from_secs(3600));
+                    (
+                        totals.0.saturating_add(stat.fail_stats.count),
+                        totals.1.saturating_add(stat.fail_stats.size),
+                        totals.2.saturating_add(minute.count),
+                        totals.3.saturating_add(minute.size),
+                        totals.4.saturating_add(hour.count),
+                        totals.5.saturating_add(hour.size),
+                    )
+                })
+        };
         ReplicationSiteMetricsSnapshot {
             uptime: metrics.uptime,
             queued_curr_count: metrics.queued.curr.count,
@@ -859,6 +893,12 @@ impl StorageReplicationStatsHandle {
             proxy_delete_tag_failed: metrics.proxied.delete_tag_failed,
             replica_size: metrics.replica_size,
             replica_count: metrics.replica_count,
+            failed_count,
+            failed_bytes,
+            failed_last_minute_count,
+            failed_last_minute_bytes,
+            failed_last_hour_count,
+            failed_last_hour_bytes,
         }
     }
 
@@ -899,6 +939,12 @@ pub(crate) struct ReplicationSiteMetricsSnapshot {
     pub(crate) proxy_delete_tag_failed: i64,
     pub(crate) replica_size: i64,
     pub(crate) replica_count: i64,
+    pub(crate) failed_count: i64,
+    pub(crate) failed_bytes: i64,
+    pub(crate) failed_last_minute_count: i64,
+    pub(crate) failed_last_minute_bytes: i64,
+    pub(crate) failed_last_hour_count: i64,
+    pub(crate) failed_last_hour_bytes: i64,
 }
 
 pub(crate) async fn get_local_server_property() -> rustfs_madmin::ServerProperties {
@@ -2043,13 +2089,32 @@ pub(crate) async fn init_compression_total_memory_from_backend(store: Arc<ECStor
 #[cfg(test)]
 mod tests {
     use super::{
-        BUCKET_RESYNC_LOCK_RETRY_MAX_MS, apply_active_resync_intents, bucket_resync_transaction_lock_retry_ceiling_ms,
+        BUCKET_RESYNC_LOCK_RETRY_MAX_MS, StorageReplicationStatsHandle, apply_active_resync_intents,
-        bucket_resync_transaction_lock_retry_delay, bucket_resync_transaction_lock_retry_reason,
+        bucket_resync_transaction_lock_retry_ceiling_ms, bucket_resync_transaction_lock_retry_delay,
-        bucket_targets_metadata_lock_shard, ecstore_bucket, lock_bucket_targets_metadata, new_instance_ctx,
+        bucket_resync_transaction_lock_retry_reason, bucket_targets_metadata_lock_shard, ecstore_bucket,
-        retry_bucket_resync_transaction_lock, scanner_maintenance_config_file,
+        lock_bucket_targets_metadata, new_instance_ctx, retry_bucket_resync_transaction_lock, scanner_maintenance_config_file,
     };
     use std::time::Duration;
 
+    #[tokio::test]
+    async fn site_metrics_snapshot_includes_live_failure_windows() {
+        let stats = StorageReplicationStatsHandle::new();
+        let mut target = ecstore_bucket::replication::BucketReplicationStat::default();
+        target.fail_stats.add_size(2048, None::<&std::io::Error>);
+        let mut bucket = ecstore_bucket::replication::BucketReplicationStats::new();
+        bucket.stats.insert("arn:replication::remote:photos".to_string(), target);
+        stats.inner.cache.write().await.insert("photos".to_string(), bucket);
+
+        let snapshot = stats.site_metrics_snapshot().await;
+
+        assert_eq!(snapshot.failed_count, 1);
+        assert_eq!(snapshot.failed_bytes, 2048);
+        assert_eq!(snapshot.failed_last_minute_count, 1);
+        assert_eq!(snapshot.failed_last_minute_bytes, 2048);
+        assert_eq!(snapshot.failed_last_hour_count, 1);
+        assert_eq!(snapshot.failed_last_hour_bytes, 2048);
+    }
+
     #[tokio::test]
     async fn bucket_target_metadata_locks_serialize_only_matching_shards() {
         let bucket = "bucket-target-lock";

scripts/check_ci_paths_sync.sh

@@ -1,83 +0,0 @@
-#!/usr/bin/env bash
-# ci.yml's pull_request paths-ignore and ci-docs-only.yml's paths must be equal.
-#
-# ci-docs-only.yml exists to report the required checks for pull requests that
-# ci.yml skips. The two lists are the complement of each other, so any drift
-# breaks one of two ways, both silent:
-#
-#   - an entry only in ci.yml's paths-ignore: a PR touching only those files
-#     triggers neither workflow, nobody reports "Test and Lint" or "Quick
-#     Checks", and the PR waits on a required check forever;
-#   - an entry only in ci-docs-only.yml's paths: both workflows run, which is
-#     merely wasteful — but it also means the lists no longer describe the same
-#     intent, and the next edit is made against a wrong assumption.
-#
-# The push paths-ignore in ci.yml is deliberately NOT compared: no required
-# check is reported for push events, so it does not have to pair with anything.
-#
-# Also asserts ci-docs-only.yml still declares both companion job names, since a
-# rename there produces exactly the permanent-pending failure above.
-#
-# Usage: scripts/check_ci_paths_sync.sh
-set -euo pipefail
-
-cd "$(dirname "$0")/.."
-
-CI=".github/workflows/ci.yml"
-DOCS=".github/workflows/ci-docs-only.yml"
-
-# Print the quoted list items that follow $2 within the block introduced by $1.
-# Both files keep these as a flat list of quoted scalars, so no YAML parser is
-# needed and the script stays dependency-free like its check_* siblings.
-extract() {
-    local file="$1" event="$2" key="$3"
-    awk -v event="$event" -v key="$key" '
-        $0 ~ "^  " event ":[[:space:]]*$" { in_event = 1; next }
-        in_event && /^  [a-z_]+:[[:space:]]*$/ { in_event = 0 }
-        in_event && $0 ~ "^    " key ":[[:space:]]*$" { in_list = 1; next }
-        in_list {
-            if ($0 ~ /^      - /) {
-                item = $0
-                sub(/^      - /, "", item)
-                gsub(/^"|"$/, "", item)
-                print item
-                next
-            }
-            if ($0 !~ /^[[:space:]]*#/ && $0 !~ /^[[:space:]]*$/) in_list = 0
-        }
-    ' "$file" | sort
-}
-
-ci_list="$(extract "$CI" "pull_request" "paths-ignore")"
-docs_list="$(extract "$DOCS" "pull_request" "paths")"
-
-if [ -z "$ci_list" ] || [ -z "$docs_list" ]; then
-    echo "ERROR: could not read one of the path lists — did the file structure change?" >&2
-    echo "  $CI pull_request.paths-ignore: $(printf '%s' "$ci_list" | grep -c . || true) entries" >&2
-    echo "  $DOCS pull_request.paths: $(printf '%s' "$docs_list" | grep -c . || true) entries" >&2
-    exit 1
-fi
-
-status=0
-
-if ! diff_out="$(diff <(printf '%s\n' "$ci_list") <(printf '%s\n' "$docs_list"))"; then
-    echo "ERROR: $CI pull_request paths-ignore and $DOCS paths have drifted." >&2
-    echo "  '<' is only in $CI, '>' is only in $DOCS:" >&2
-    printf '%s\n' "$diff_out" | sed 's/^/    /' >&2
-    status=1
-fi
-
-for job_name in "Test and Lint" "Quick Checks"; do
-    if ! grep -q "name: ${job_name}\$" "$DOCS"; then
-        echo "ERROR: $DOCS no longer declares a job named '${job_name}'." >&2
-        echo "  It is a required status check; without a companion job here, a" >&2
-        echo "  docs-only PR waits on it forever." >&2
-        status=1
-    fi
-done
-
-if [ "$status" -ne 0 ]; then
-    exit 1
-fi
-
-echo "OK: ci.yml and ci-docs-only.yml path lists agree ($(printf '%s\n' "$ci_list" | wc -l | tr -d ' ') entries)"

scripts/check_s3s_footprint.sh

@@ -55,8 +55,11 @@ cd "$(dirname "$0")/.."
 # now reports an unreadable configuration as a plain string instead of raising
 # an S3 error per arm (24 invocation lines removed from
 # rustfs/src/admin/handlers/bucket_meta.rs; measured after merging the two).
+# 1589 -> 1588 on 2026-09-08: the GA blocker set (rustfs/backlog#2366) added
+# three invocation lines to the endpoint-refresh paths and folded the five
+# copies of the concurrent-change error into one constructor, netting -1.
 S3S_IMPORT_FILES_BASELINE=213
-S3_ERROR_LINES_BASELINE=1589
+S3_ERROR_LINES_BASELINE=1588
 # ecstore-scoped ratchet (rustfs/backlog#1842): the storage engine must not
 # know S3 wire/DTO types (ARCHITECTURE.md invariant 4). The S3-*consuming*
 # client was extracted to crates/s3-client, where s3s usage is legitimate;

scripts/check_test_wiring.py

@@ -542,7 +542,7 @@ def yaml_scalar_continues(lines: list[str], index: int, indent: int) -> bool:
 def check_quick_checks(root: Path) -> list[str]:
     errors: list[str] = []
     bypass_key = r'''(?:if|continue-on-error|needs|"if"|"continue-on-error"|"needs"|'if'|'continue-on-error'|'needs')\s*:'''
-    for name in ("ci.yml", "ci-docs-only.yml"):
+    for name in ("ci.yml",):
         relative = f".github/workflows/{name}"
         path = root / relative
         job = yaml_block(path.read_text().splitlines(), "quick-checks", 2) if path.is_file() else None
@@ -1165,7 +1165,6 @@ class SelfTests(unittest.TestCase):
                 ".github/workflows/ci.yml": caller.replace(
                     "    steps:", "    if: github.event_name != 'pull_request' || github.event.action != 'closed'\n    steps:"
                 ),
-                ".github/workflows/ci-docs-only.yml": caller,
                 ".github/actions/quick-checks/action.yml": action,
             }
             for relative, source in sources.items():
@@ -1173,7 +1172,7 @@ class SelfTests(unittest.TestCase):
                 path.parent.mkdir(parents=True, exist_ok=True)
                 path.write_text(source)
             self.assertEqual(check_quick_checks(root), [])
-            for relative in (".github/workflows/ci.yml", ".github/workflows/ci-docs-only.yml"):
+            for relative in (".github/workflows/ci.yml",):
                 source = sources[relative]
                 mutations = {
                     "different action": source.replace("./.github/actions/quick-checks", "./.github/actions/other"),

scripts/ci_gate.py

@@ -0,0 +1,369 @@
+#!/usr/bin/env python3
+"""Select safe documentation-only CI and verify the complete required job set."""
+from __future__ import annotations
+
+import json
+import os
+from pathlib import Path, PurePosixPath
+import re
+import subprocess
+import sys
+import tempfile
+import unittest
+
+ROOT = Path(__file__).resolve().parent.parent
+ALWAYS_JOBS = ("classify-changes", "typos", "quick-checks")
+CODE_JOBS = (
+    "test-and-lint", "test-ilm-integration-serial", "test-and-lint-rio-v2",
+    "connect-short-credential-boundary", "test-and-lint-protocols",
+    "build-rustfs-debug-binary", "uring-integration", "e2e-tests",
+    "s3-implemented-tests", "s3-lifecycle-behavior-tests",
+)
+OPTIONAL_JOBS = ("build-rustfs-debug-binary-rio-v2", "e2e-tests-rio-v2", "e2e-full")
+NON_VALIDATION_JOBS = {"required-checks", "cancel-closed-pr-runs", "alert-on-failure"}
+
+
+def documentation_path(path: str) -> bool:
+    parts = PurePosixPath(path).parts
+    if not parts or path.startswith("/") or any(part in (".", "..") for part in parts) or any(ord(c) < 32 for c in path):
+        return False
+    if parts[-1] == "AGENTS.md":
+        return True
+    if len(parts) == 1 and (path.endswith(".md") or path == "LICENSE" or path.startswith("LICENSE-")):
+        return True
+    if path.startswith(("docs/", ".agents/skills/")) and path.endswith(".md"):
+        return True
+    return path.startswith("docs/") and path.endswith((".png", ".jpg", ".svg"))
+
+
+def select_mode(event: str, base: str, head: str, root: Path) -> str:
+    if event != "pull_request" or not all(re.fullmatch(r"[0-9a-f]{40}", sha) for sha in (base, head)):
+        return "full"
+    try:
+        changed = subprocess.check_output(
+            ["git", "diff", "--no-ext-diff", "--no-textconv", "--no-renames", "--name-only", "-z", base, head, "--"],
+            cwd=root, stderr=subprocess.PIPE,
+        ).decode("utf-8")
+    except (subprocess.CalledProcessError, UnicodeError):
+        return "full"
+    paths = changed.rstrip("\0").split("\0") if changed else []
+    return "docs" if paths and all(documentation_path(path) for path in paths) else "full"
+
+
+def expected_results(mode: str, event: str, ref: str) -> dict[str, str]:
+    if event not in ("pull_request", "push", "merge_group", "schedule", "workflow_dispatch"):
+        raise ValueError(f"unsupported CI event: {event!r}")
+    if mode not in ("docs", "full") or (mode == "docs" and event != "pull_request"):
+        raise ValueError(f"invalid CI selection: {mode!r} for {event!r}")
+    expected = {job: "success" for job in ALWAYS_JOBS}
+    expected.update({job: "success" if mode == "full" else "skipped" for job in CODE_JOBS})
+    rio = mode == "full" and event in ("schedule", "workflow_dispatch")
+    expected.update({job: "success" if rio else "skipped" for job in OPTIONAL_JOBS[:2]})
+    full = mode == "full" and (event in ("merge_group", "workflow_dispatch") or (event == "push" and ref == "refs/heads/main"))
+    expected["e2e-full"] = "success" if full else "skipped"
+    return expected
+
+
+def verify_results(needs: object, event: str, ref: str) -> list[str]:
+    if not isinstance(needs, dict):
+        return ["needs must be a job-result object"]
+    selection = needs.get("classify-changes", {})
+    outputs = selection.get("outputs", {}) if isinstance(selection, dict) else {}
+    mode = outputs.get("mode") if isinstance(outputs, dict) else None
+    try:
+        expected = expected_results(mode, event, ref)
+    except ValueError as error:
+        return [str(error)]
+    errors = []
+    if set(needs) != set(expected):
+        errors.append(f"job set differs: missing={sorted(set(expected) - set(needs))}, unexpected={sorted(set(needs) - set(expected))}")
+    for job, required in expected.items():
+        result = needs.get(job, {})
+        actual = result.get("result") if isinstance(result, dict) else None
+        if actual != required:
+            errors.append(f"{job}: expected {required}, got {actual!r}")
+    return errors
+
+
+def check_workflow(root: Path) -> list[str]:
+    # Reuse the repository's canonical-indentation checker; actionlint validates YAML syntax.
+    from check_test_wiring import yaml_block, yaml_scalar_continues
+
+    errors = []
+    lines = (root / ".github/workflows/ci.yml").read_text().splitlines()
+    jobs = yaml_block(lines, "jobs", 0) or []
+    names = set()
+    for index, line in enumerate(jobs):
+        if not re.match(r"^  \S", line) or line.lstrip().startswith("#"):
+            continue
+        header = re.fullmatch(r'''  (["']?)([A-Za-z_][A-Za-z0-9_-]*)\1\s*:\s*(?:#.*)?''', line)
+        if header is None:
+            errors.append("CI job declarations must use single-line job IDs")
+            continue
+        name = header[2]
+        if name in names:
+            errors.append(f"duplicate CI job ID: {name}")
+        names.add(name)
+        jobs[index] = f"  {name}:"
+    required = set(ALWAYS_JOBS + CODE_JOBS + OPTIONAL_JOBS)
+    if names - NON_VALIDATION_JOBS != required:
+        errors.append("CI verification jobs and the required gate contract differ")
+    for job in required:
+        block = yaml_block(jobs, job, 2) or []
+        if any(re.match(r"\s+(?:- )?[\"']?continue-on-error[\"']?\s*:", line) for line in block):
+            errors.append(f"{job} cannot convert a validation failure into success")
+    gate = yaml_block(jobs, "required-checks", 2) or []
+    def scalar(block, key, indent):
+        prefix = " " * indent + key + ": "
+        matches = [index for index, line in enumerate(block) if line.startswith(prefix)]
+        if len(matches) != 1:
+            return None
+        index = matches[0]
+        if yaml_scalar_continues(block, index, indent):
+            return None
+        return block[index][len(prefix):]
+
+    display_names = {}
+    for job in names:
+        block = [re.sub(r'''^    (?:'name'|"name")\s*:\s*''', "    name: ", line)
+                 for line in yaml_block(jobs, job, 2) or []]
+        value = scalar(block, "name", 4)
+        display = re.fullmatch(r'''(?:"([^"\\]*)"|'([^']*)'|([^'"#][^#]*?))(?:\s+#.*)?\s*''', (value or "").strip())
+        if display is None or (display[3] is not None and display[3].startswith(tuple("|>*&!{[?"))):
+            errors.append(f"{job} must use a verifiable single-line display name")
+            continue
+        name = next(value for value in display.groups() if value is not None)
+        if "${{" in name and (job != "test-and-lint-protocols" or name != "Test and Lint (${{ matrix.features.name }})"):
+            errors.append(f"{job} has an unverifiable dynamic display name")
+        display_names[job] = name
+
+    dependencies = yaml_block(gate, "needs", 4) or []
+    declared = [line.strip().removeprefix("- ") for line in dependencies if line.strip()]
+    if set(declared) != required or len(declared) != len(required):
+        errors.append("required-checks must directly depend on every verification job exactly once")
+    if display_names.get("required-checks") != "Test and Lint" or list(display_names.values()).count("Test and Lint") != 1:
+        errors.append("Test and Lint must uniquely name the aggregate gate")
+    if scalar(gate, "if", 4) != "always() && (github.event_name != 'pull_request' || github.event.action != 'closed')":
+        errors.append("required-checks must run after failed or skipped dependencies")
+    if scalar(gate, "shell", 8) != "bash" or scalar(gate, "run", 8) != "python3 scripts/ci_gate.py verify" or scalar(gate, "CI_NEEDS", 10) != "${{ toJSON(needs) }}":
+        errors.append("required-checks must verify the actual needs results")
+    if any(re.match(r'''\s+(?:- )?(?:["']?continue-on-error["']?\s*:|["']?if["']?\s*:)''', line) and not line.startswith("    if:") for line in gate):
+        errors.append("required-checks cannot ignore failures")
+    pr = yaml_block(lines, "pull_request", 2) or []
+    if any(line.strip().startswith(("paths:", "paths-ignore:")) for line in pr):
+        errors.append("all pull requests must enter the single CI workflow")
+    if (root / ".github/workflows/ci-docs-only.yml").exists():
+        errors.append("the duplicate required-status companion must be removed")
+    return errors
+
+
+class SelfTests(unittest.TestCase):
+    def test_documentation_paths_do_not_hide_build_or_fixture_changes(self):
+        for path in ("README.md", "AGENTS.md", "crates/utils/AGENTS.md", "docs/testing/README.md", "docs/diagram.svg", ".agents/skills/example/SKILL.md"):
+            self.assertTrue(documentation_path(path), path)
+        for path in ("", "src/lib.rs", "crates/foo/tests/fixtures/data.md", "Cargo.lock", "build.rs", "deploy/chart.yaml", ".github/workflows/ci.yml", "scripts/dev_build.sh", "assets/logo.png", "docs/test.rs", "README.md\n", "../README.md"):
+            self.assertFalse(documentation_path(path), path)
+
+    def test_git_range_includes_deleted_source_and_rename_origins(self):
+        with tempfile.TemporaryDirectory() as directory:
+            root = Path(directory)
+            def git(*args):
+                return subprocess.check_output(["git", "-c", "core.hooksPath=/dev/null", "-c", "user.name=CI Test", "-c", "user.email=ci@example.invalid", *args], cwd=root, stderr=subprocess.PIPE).decode().strip()
+            git("init", "-q")
+            (root / "server.rs").write_text("fn main() {}\n")
+            (root / "README.md").write_text("old\n")
+            git("add", "."); git("commit", "-qm", "base")
+            base = git("rev-parse", "HEAD")
+            (root / "README.md").write_text("new\n")
+            git("add", "."); git("commit", "-qm", "docs")
+            docs = git("rev-parse", "HEAD")
+            self.assertEqual(select_mode("pull_request", base, docs, root), "docs")
+            (root / "server.rs").rename(root / "server.md")
+            git("add", "-A"); git("commit", "-qm", "rename source")
+            head = git("rev-parse", "HEAD")
+            self.assertEqual(select_mode("pull_request", base, head, root), "full")
+            self.assertEqual(select_mode("pull_request", docs, docs, root), "full")
+            self.assertEqual(select_mode("pull_request", "0" * 40, head, root), "full")
+            self.assertEqual(select_mode("pull_request", "--output=bad", head, root), "full")
+            self.assertEqual(select_mode("merge_group", base, docs, root), "full")
+
+    def test_event_contract_requires_complete_candidate_and_optional_lanes(self):
+        ordinary = expected_results("full", "pull_request", "refs/pull/1/merge")
+        self.assertEqual({job for job, state in ordinary.items() if state == "skipped"}, set(OPTIONAL_JOBS))
+        docs = expected_results("docs", "pull_request", "refs/pull/1/merge")
+        self.assertEqual({job for job, state in docs.items() if state == "success"}, set(ALWAYS_JOBS))
+        for event in ("schedule", "workflow_dispatch", "merge_group", "push"):
+            result = expected_results("full", event, "refs/heads/main")
+            self.assertEqual(result["e2e-full"], "skipped" if event == "schedule" else "success")
+            self.assertEqual(result["e2e-tests-rio-v2"], "success" if event in ("schedule", "workflow_dispatch") else "skipped")
+            with self.assertRaises(ValueError):
+                expected_results("docs", event, "refs/heads/main")
+
+    def test_every_wrong_result_missing_job_or_selection_fails_closed(self):
+        for mode, event in (("full", "pull_request"), ("docs", "pull_request"), ("full", "schedule"), ("full", "workflow_dispatch"), ("full", "merge_group")):
+            good = {job: {"result": value} for job, value in expected_results(mode, event, "refs/heads/main").items()}
+            good["classify-changes"]["outputs"] = {"mode": mode}
+            self.assertEqual(verify_results(good, event, "refs/heads/main"), [])
+            for job in good:
+                for value in ("success", "skipped", "failure", "cancelled", "neutral", "", None):
+                    if value == good[job]["result"]:
+                        continue
+                    with self.subTest(mode=mode, event=event, job=job, result=value):
+                        bad = {**good, job: {**good[job], "result": value}}
+                        self.assertTrue(verify_results(bad, event, "refs/heads/main"))
+                self.assertTrue(verify_results({key: value for key, value in good.items() if key != job}, event, "refs/heads/main"))
+                missing_result = {key: value for key, value in good[job].items() if key != "result"}
+                self.assertTrue(verify_results({**good, job: missing_result}, event, "refs/heads/main"))
+            self.assertTrue(verify_results({**good, "unknown-job": {"result": "success"}}, event, "refs/heads/main"))
+            for selection in ({}, {"mode": ""}, {"mode": True}, []):
+                bad = {**good, "classify-changes": {"result": "success", "outputs": selection}}
+                self.assertTrue(verify_results(bad, event, "refs/heads/main"))
+
+    def test_repository_wiring_and_missing_dependency_regression(self):
+        self.assertEqual(check_workflow(ROOT), [])
+        with tempfile.TemporaryDirectory() as directory:
+            root = Path(directory)
+            (root / ".github/workflows").mkdir(parents=True)
+            source = (ROOT / ".github/workflows/ci.yml").read_text()
+            path = root / ".github/workflows/ci.yml"
+            for job in ALWAYS_JOBS + CODE_JOBS + OPTIONAL_JOBS:
+                before, gate = source.split("  required-checks:\n", 1)
+                path.write_text(before + "  required-checks:\n" + gate.replace(f"      - {job}\n", "", 1))
+                self.assertTrue(check_workflow(root), job)
+            for old, new in (
+                ("run: python3 scripts/ci_gate.py verify", "run: python3 scripts/ci_gate.py verify || true"),
+                ("run: python3 scripts/ci_gate.py verify", "run: python3 scripts/ci_gate.py verify\n          || true"),
+                ("CI_NEEDS: ${{ toJSON(needs) }}", "CI_NEEDS: '{}'"),
+                ("name: Test and Lint\n", "name: Unrequired result\n"),
+                ("        shell: bash\n        run: python3 scripts/ci_gate.py verify", "        shell: echo {0}\n        run: python3 scripts/ci_gate.py verify"),
+                ("        shell: bash\n        run: python3 scripts/ci_gate.py verify", "        run: python3 scripts/ci_gate.py verify"),
+                ("        run: python3 scripts/ci_gate.py verify", '        "if": false\n        run: python3 scripts/ci_gate.py verify'),
+            ):
+                path.write_text(source.replace(old, new))
+                self.assertTrue(check_workflow(root), new)
+            for job in ALWAYS_JOBS + CODE_JOBS + OPTIONAL_JOBS:
+                for field in ("continue-on-error", '"continue-on-error"', "'continue-on-error'"):
+                    path.write_text(source.replace(f"  {job}:\n", f"  {job}:\n    {field}: true\n", 1))
+                    self.assertTrue(check_workflow(root), (job, field))
+                    before, block = source.split(f"  {job}:\n", 1)
+                    block = block.replace("      - name:", f"      - {field}: true\n        name:", 1)
+                    path.write_text(before + f"  {job}:\n" + block)
+                    self.assertTrue(check_workflow(root), (job, field, "step"))
+            path.write_text(source + "\n  cancel-after-test-and-lint-failure:\n    runs-on: ubuntu-latest\n")
+            self.assertTrue(check_workflow(root))
+
+    def test_job_ids_and_display_names_cannot_hide_validation(self):
+        with tempfile.TemporaryDirectory() as directory:
+            root = Path(directory)
+            (root / ".github/workflows").mkdir(parents=True)
+            source = (ROOT / ".github/workflows/ci.yml").read_text()
+            path = root / ".github/workflows/ci.yml"
+            for header in ("typos", "'typos'", '"typos"'):
+                path.write_text(source.replace("  typos:\n", f"  {header}: # spelling\n"))
+                self.assertEqual(check_workflow(root), [], header)
+            for name in ("Test and Lint # required", "'Test and Lint'", '"Test and Lint" # required'):
+                path.write_text(source.replace("    name: Test and Lint\n", f"    name: {name}\n"))
+                self.assertEqual(check_workflow(root), [], name)
+            for key in ("'name'", '"name"'):
+                path.write_text(source.replace("    name: Typos\n", f"    {key}: Typos\n"))
+                self.assertEqual(check_workflow(root), [], key)
+            for header in ("new_test", "NewTest", "_new_test", "'new_test'", '"new_test"', '"new\\u005ftest"'):
+                path.write_text(source + f"\n  {header}:\n    name: New test\n    runs-on: ubuntu-latest\n    steps:\n      - run: exit 1\n")
+                self.assertTrue(check_workflow(root), header)
+            path.write_text(source + "\n  'typos':\n    name: Duplicate\n    runs-on: ubuntu-latest\n    steps:\n      - run: exit 1\n")
+            self.assertIn("duplicate CI job ID: typos", check_workflow(root))
+            for name in (
+                "Test and Lint", "Test and Lint # duplicate", "'Test and Lint'",
+                '"Test and Lint" # duplicate', '"Test\\u0020and Lint"',
+                ">-\n      Test and Lint", "|-\n      Test and Lint", "Test and\n      Lint",
+                "*required_name", "&required_name Test and Lint", "!!str Test and Lint",
+                "${{ 'Test and Lint' }}", '"${{ github.event.inputs.check_name }}"',
+            ):
+                path.write_text(source.replace("    name: Typos\n", f"    name: {name}\n"))
+                self.assertTrue(check_workflow(root), name)
+            path.write_text(source.replace("    name: Typos\n", ""))
+            self.assertIn("typos must use a verifiable single-line display name", check_workflow(root))
+
+    def test_verify_command_preserves_failures(self):
+        good = {job: {"result": value} for job, value in expected_results("full", "pull_request", "refs/pull/1/merge").items()}
+        good["classify-changes"]["outputs"] = {"mode": "full"}
+        failed = {**good, "e2e-tests": {"result": "failure"}}
+        for needs, code in ((json.dumps(good), 0), (json.dumps(failed), 1), ("{}", 1), ("{", 1)):
+            with self.subTest(needs=needs):
+                env = dict(os.environ, CI_NEEDS=needs, GITHUB_EVENT_NAME="pull_request", GITHUB_REF="refs/pull/1/merge")
+                result = subprocess.run([sys.executable, str(Path(__file__).resolve()), "verify"], env=env, capture_output=True, text=True)
+                self.assertEqual(result.returncode, code, result.stderr)
+                self.assertIn("ERROR:" if code else "CI contract passed", result.stderr if code else result.stdout)
+
+    def test_actual_selector_bootstrap_uses_base_policy_and_fails_closed(self):
+        from check_test_wiring import yaml_block
+        jobs = yaml_block((ROOT / ".github/workflows/ci.yml").read_text().splitlines(), "jobs", 0)
+        selector = yaml_block(jobs, "classify-changes", 2)
+        body = "\n".join(line[10:] for line in selector[selector.index("        run: |") + 1:])
+        for event, changed, base_sha, available, broken, expected in (
+            ("pull_request", "README.md", "b" * 40, True, False, "docs"),
+            ("pull_request", "src/server.rs", "b" * 40, True, False, "full"),
+            ("pull_request", "README.md", "b" * 40, False, False, "full"),
+            ("merge_group", "README.md", "b" * 40, False, False, "full"),
+            ("pull_request", "README.md", "b" * 40, True, True, None),
+            ("pull_request", "README.md", "", True, True, "full"),
+        ):
+            with self.subTest(event=event, changed=changed, available=available, broken=broken), tempfile.TemporaryDirectory() as directory:
+                root = Path(directory)
+                (root / "scripts").mkdir()
+                (root / "scripts/ci_gate.py").write_text("raise SystemExit(71)\n")
+                (root / "python3").symlink_to(sys.executable)
+                base = root / "base-policy.py"
+                base.write_text("raise SystemExit(29)\n" if broken else Path(__file__).read_text())
+                git = root / "git"
+                git.write_text('''#!/bin/sh
+if [ "$1" = show ]; then
+  [ "$2" = "$CI_BASE_SHA:scripts/ci_gate.py" ] || exit 19
+  [ "$BASE_AVAILABLE" = yes ] || exit 128
+  cat "$BASE_POLICY"
+elif [ "$1" = diff ]; then
+  printf '%s\\0' "$CHANGED_PATH"
+else
+  exit 20
+fi
+''')
+                git.chmod(0o755)
+                output = root / "output"
+                output.touch()
+                env = dict(os.environ, GITHUB_EVENT_NAME=event, CI_BASE_SHA=base_sha, GITHUB_SHA="c" * 40,
+                           RUNNER_TEMP=str(root), GITHUB_OUTPUT=str(output), BASE_POLICY=str(base),
+                           BASE_AVAILABLE="yes" if available else "no", CHANGED_PATH=changed,
+                           PATH=f"{root}{os.pathsep}{os.environ['PATH']}")
+                result = subprocess.run(["bash", "--noprofile", "--norc", "-e", "-o", "pipefail", "-c", body], cwd=root, env=env, capture_output=True, text=True)
+                self.assertEqual(result.returncode, 29 if expected is None else 0, result.stderr)
+                self.assertEqual(output.read_text(), "" if expected is None else f"mode={expected}\n")
+
+
+def main() -> int:
+    if sys.argv[1:] == ["--self-test"]:
+        return not unittest.TextTestRunner(verbosity=2).run(unittest.defaultTestLoader.loadTestsFromTestCase(SelfTests)).wasSuccessful()
+    if sys.argv[1:] == ["select"]:
+        mode = select_mode(os.environ.get("GITHUB_EVENT_NAME", ""), os.environ.get("CI_BASE_SHA", ""), os.environ.get("GITHUB_SHA", ""), Path.cwd())
+        with open(os.environ["GITHUB_OUTPUT"], "a") as output:
+            output.write(f"mode={mode}\n")
+        print(f"CI selection: {mode}")
+        return 0
+    if sys.argv[1:] == ["verify"]:
+        try:
+            errors = verify_results(json.loads(os.environ["CI_NEEDS"]), os.environ.get("GITHUB_EVENT_NAME", ""), os.environ.get("GITHUB_REF", ""))
+        except (KeyError, ValueError) as error:
+            errors = [str(error)]
+    elif sys.argv[1:] == ["--check-workflow"]:
+        errors = check_workflow(ROOT)
+    else:
+        print("usage: ci_gate.py {select|verify|--check-workflow|--self-test}", file=sys.stderr)
+        return 2
+    for error in errors:
+        print(f"ERROR: {error}", file=sys.stderr)
+    if not errors:
+        print("CI contract passed")
+    return bool(errors)
+
+
+if __name__ == "__main__":
+    raise SystemExit(main())

scripts/e2e_binary.py

@@ -0,0 +1,253 @@
+#!/usr/bin/env python3
+"""Build an identified E2E server and verify it around one test invocation."""
+
+import argparse
+from contextlib import contextmanager
+import hashlib
+import json
+import os
+from pathlib import Path
+import stat
+import signal
+import subprocess
+import sys
+import tempfile
+
+ROOT = Path(__file__).resolve().parent.parent
+RECEIPT_ENV = "RUSTFS_E2E_BINARY_RECEIPT"
+
+
+def feature_set(value):
+    return sorted(set(part.strip() for part in value.split(",") if part.strip()))
+
+
+def file_hash(path):
+    digest = hashlib.sha256()
+    with path.open("rb") as source:
+        for chunk in iter(lambda: source.read(1024 * 1024), b""):
+            digest.update(chunk)
+    return digest.hexdigest()
+
+
+def source_identity():
+    head = subprocess.check_output(["git", "rev-parse", "HEAD"], cwd=ROOT, text=True).strip()
+    tracked = subprocess.check_output(["git", "ls-files", "--cached", "--others", "--exclude-standard", "-z"], cwd=ROOT)
+    paths = set(tracked.decode("utf-8").rstrip("\0").split("\0")) - {""}
+    # RustEmbed consumes ignored console assets as well as tracked Rust sources.
+    static_dir = ROOT / "rustfs/static"
+    if static_dir.is_symlink():
+        raise ValueError("The embedded static directory must not be a symlink")
+    if static_dir.is_dir():
+        for path in static_dir.rglob("*"):
+            if path.is_symlink() and path.is_dir():
+                raise ValueError(f"Unsupported embedded directory symlink: {path}")
+            if not path.is_dir():
+                paths.add(str(path.relative_to(ROOT)))
+    elif static_dir.exists():
+        paths.add("rustfs/static")
+    digest = hashlib.sha256()
+    digest.update(b"static-present\0" if static_dir.is_dir() else b"static-absent\0")
+    for name in sorted(paths):
+        path = ROOT / name
+        digest.update(name.encode("utf-8") + b"\0")
+        try:
+            metadata = path.lstat()
+        except FileNotFoundError:
+            digest.update(b"deleted\0")
+            continue
+        if stat.S_ISLNK(metadata.st_mode):
+            digest.update(b"symlink\0" + os.fsencode(os.readlink(path)) + b"\0")
+            if path.is_dir():
+                target = path.resolve()
+                if ROOT not in target.parents:
+                    raise ValueError(f"Directory link escapes the source inventory: {name}")
+                # Directory aliases such as .claude/skills share already-hashed inputs.
+                for child in target.rglob("*"):
+                    if child.is_dir() and not child.is_symlink():
+                        continue
+                    if child.is_dir() or str(child.relative_to(ROOT)) not in paths:
+                        raise ValueError(f"Directory link contains an unrecorded input: {child}")
+                digest.update(b"directory\0" + str(target.relative_to(ROOT)).encode("utf-8") + b"\0")
+                continue
+        elif not stat.S_ISREG(metadata.st_mode):
+            raise ValueError(f"Unsupported build input: {name}")
+        digest.update(str(metadata.st_mode & 0o111).encode() + b"\0")
+        digest.update(file_hash(path).encode() + b"\0")
+    return {"head": head, "sha256": digest.hexdigest()}
+
+
+def sidecar_path(binary):
+    return binary.with_name(binary.name + ".e2e.json")
+
+
+def validate_target_directory(target_dir):
+    if target_dir == ROOT or target_dir in ROOT.parents:
+        raise ValueError("CARGO_TARGET_DIR must not contain the source workspace")
+    if ROOT in target_dir.parents:
+        ignored = subprocess.run(["git", "check-ignore", "--quiet", "--no-index", str(target_dir.relative_to(ROOT))], cwd=ROOT)
+        if ignored.returncode != 0:
+            raise ValueError("An in-workspace CARGO_TARGET_DIR must be Git-ignored; use target/ or an external directory")
+
+
+@contextmanager
+def exclusive_binary(binary):
+    marker = binary.with_name(binary.name + ".e2e.lock")
+    try:
+        descriptor = os.open(marker, os.O_CREAT | os.O_EXCL | os.O_WRONLY, 0o600)
+    except FileExistsError as error:
+        raise ValueError(f"Another E2E build/run owns {marker}; do not share a target directory between concurrent runs") from error
+    try:
+        identity = os.fstat(descriptor)
+        with os.fdopen(descriptor, "w") as lock:
+            lock.write(f"pid={os.getpid()}\n")
+        yield
+    finally:
+        current = marker.stat()
+        if (current.st_dev, current.st_ino) != (identity.st_dev, identity.st_ino):
+            raise ValueError("The E2E ownership marker changed during the command")
+        marker.unlink()
+
+
+def terminate_command(process):
+    if process.poll() is not None:
+        return
+    try:
+        os.killpg(process.pid, signal.SIGTERM)
+    except ProcessLookupError:
+        return
+    try:
+        process.wait(timeout=5)
+    except subprocess.TimeoutExpired:
+        os.killpg(process.pid, signal.SIGKILL)
+        process.wait()
+
+
+def build(binary, target_dir, profile, requested, all_bins):
+    sidecar = sidecar_path(binary)
+    sidecar.unlink(missing_ok=True)
+    before = source_identity()
+    command = ["cargo", "build", "--locked", "-p", "rustfs", "--target-dir", str(target_dir), "--message-format=json-render-diagnostics"]
+    command.extend(["--bins"] if all_bins else ["--bin", "rustfs"])
+    if requested:
+        command.extend(["--features", ",".join(requested)])
+    if profile == "release":
+        command.append("--release")
+    artifact = None
+    with subprocess.Popen(command, cwd=ROOT, stdout=subprocess.PIPE, text=True, start_new_session=True) as process:
+        try:
+            for line in process.stdout:
+                message = json.loads(line)
+                if message.get("reason") == "compiler-message":
+                    print(message["message"].get("rendered", ""), end="", file=sys.stderr)
+                if message.get("reason") == "compiler-artifact" and message.get("target", {}).get("name") == "rustfs" and "bin" in message.get("target", {}).get("kind", []):
+                    artifact = message
+            if process.wait() != 0:
+                raise ValueError("RustFS build failed; no E2E identity was recorded")
+        except BaseException:
+            terminate_command(process)
+            raise
+    if not artifact or Path(artifact.get("executable", "")).resolve() != binary:
+        raise ValueError("Cargo did not produce the requested RustFS executable")
+    if source_identity() != before:
+        raise ValueError("Build inputs changed during compilation; finish preparing embedded assets and rebuild in an isolated worktree")
+    record = {
+        "schema": 1,
+        "source": before,
+        "requested_features": requested,
+        "features": sorted(artifact["features"]),
+        "profile": profile,
+        "rustc": subprocess.check_output(["rustc", "-Vv"], text=True),
+        "binary_sha256": file_hash(binary),
+    }
+    sidecar.write_text(json.dumps(record, sort_keys=True) + "\n")
+    print(f"Built E2E server: {binary}\nIdentity: {sidecar}", file=sys.stderr)
+
+
+def verify(binary, profile, requested):
+    record = json.loads(sidecar_path(binary).read_text())
+    if not isinstance(record, dict) or set(record) != {"schema", "source", "requested_features", "features", "profile", "rustc", "binary_sha256"} or type(record["schema"]) is not int or record["schema"] != 1:
+        raise ValueError("Missing or unsupported E2E binary identity; run the build command")
+    if not isinstance(record["rustc"], str) or not record["rustc"].strip():
+        raise ValueError("Missing E2E build toolchain identity")
+    if record["requested_features"] != requested or record["profile"] != profile:
+        raise ValueError("E2E binary build features/profile differ from this test invocation")
+    if not isinstance(record["features"], list) or not all(isinstance(item, str) for item in record["features"]) or not set(requested) <= set(record["features"]):
+        raise ValueError("Invalid resolved E2E binary features")
+    if record["source"] != source_identity():
+        raise ValueError("E2E binary was built from different inputs; rebuild before testing")
+    if record["binary_sha256"] != file_hash(binary):
+        raise ValueError("E2E binary content differs from its build identity")
+    return record
+
+
+def run(binary, profile, requested, command):
+    if not command:
+        raise ValueError("run requires a test command after --")
+    override = os.environ.get("CARGO_BIN_EXE_rustfs")
+    if override and Path(override).resolve() != binary:
+        raise ValueError("CARGO_BIN_EXE_rustfs selects a different server; use --binary explicitly")
+    record = verify(binary, profile, requested)
+    metadata = binary.stat()
+    with tempfile.TemporaryDirectory(prefix="rustfs-e2e-receipt-") as directory:
+        receipt = Path(directory) / "receipt.json"
+        receipt.write_text(json.dumps({
+            "schema": 1,
+            "workspace": str(ROOT),
+            "binary": str(binary),
+            "size": metadata.st_size,
+            "modified_ns": metadata.st_mtime_ns,
+            "features": record["features"],
+        }))
+        env = dict(os.environ, CARGO_BIN_EXE_rustfs=str(binary), RUSTFS_BUILD_FEATURES=",".join(record["features"]))
+        env[RECEIPT_ENV] = str(receipt)
+        with subprocess.Popen(command, cwd=ROOT, env=env, start_new_session=True) as process:
+            try:
+                status = process.wait()
+            except (KeyboardInterrupt, SystemExit):
+                terminate_command(process)
+                raise
+        try:
+            if verify(binary, profile, requested) != record:
+                raise ValueError("E2E build identity changed during testing")
+        except (OSError, ValueError, subprocess.SubprocessError) as error:
+            print(f"E2E validation invalidated: {error}", file=sys.stderr)
+            return status if status else 1
+        return status
+
+
+def main():
+    parser = argparse.ArgumentParser(description=__doc__)
+    parser.add_argument("mode", choices=("build", "run"))
+    parser.add_argument("--features", default="", help="additional Cargo features; defaults remain enabled")
+    parser.add_argument("--profile", choices=("debug", "release"), default="debug")
+    parser.add_argument("--binary", type=Path, help="prebuilt server path for run")
+    parser.add_argument("--bins", action="store_true", help="build all RustFS binary targets, preserving the CI build matrix")
+    # Parse the child command separately so its options are never interpreted here.
+    args = sys.argv[1:]
+    separator = args.index("--") if "--" in args else len(args)
+    command = args[separator + 1:] if separator < len(args) else []
+    options = parser.parse_args(args[:separator])
+    target_dir = Path(os.environ.get("CARGO_TARGET_DIR", ROOT / "target")).resolve()
+    binary = (options.binary or target_dir / options.profile / ("rustfs.exe" if os.name == "nt" else "rustfs")).resolve()
+    try:
+        validate_target_directory(target_dir)
+        requested = feature_set(options.features)
+        if options.mode == "build":
+            binary.parent.mkdir(parents=True, exist_ok=True)
+        with exclusive_binary(binary):
+            if options.mode == "build":
+                if options.binary or command:
+                    raise ValueError("build does not accept --binary or a child command")
+                build(binary, target_dir, options.profile, requested, options.bins)
+                return 0
+            if options.bins:
+                raise ValueError("--bins is a build option")
+            return run(binary, options.profile, requested, command)
+    except (OSError, ValueError, subprocess.SubprocessError) as error:
+        print(f"E2E prerequisite failed: {error}", file=sys.stderr)
+        return 1
+
+
+if __name__ == "__main__":
+    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(128 + signum))
+    raise SystemExit(main())

scripts/run_e2e_tests.sh

@@ -14,7 +14,12 @@ NC='\033[0m' # No Color
 
 # Default values
 PROJECT_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
-TARGET_DIR="$PROJECT_ROOT/target/debug"
+CARGO_TARGET_DIR="${CARGO_TARGET_DIR:-$PROJECT_ROOT/target}"
+if [[ "$CARGO_TARGET_DIR" != /* ]]; then
+    CARGO_TARGET_DIR="$PROJECT_ROOT/$CARGO_TARGET_DIR"
+fi
+export CARGO_TARGET_DIR
+TARGET_DIR="$CARGO_TARGET_DIR/debug"
 RUSTFS_BINARY="$TARGET_DIR/rustfs"
 DATA_DIR="$TARGET_DIR/rustfs_test_data"
 RUSTFS_PID=""
@@ -94,7 +99,7 @@ build_rustfs() {
     print_info "Building RustFS..."
     cd "$PROJECT_ROOT"
     
-    if ! cargo build --bin rustfs --features "$RUSTFS_BUILD_FEATURES"; then
+    if ! python3 scripts/e2e_binary.py build --features "$RUSTFS_BUILD_FEATURES"; then
         print_error "Failed to build RustFS"
         exit 1
     fi
@@ -115,6 +120,10 @@ check_dependencies() {
         missing_tools+=("curl")
     fi
     
+    if ! command -v python3 >/dev/null 2>&1; then
+        missing_tools+=("python3")
+    fi
+
     if ! command -v cargo >/dev/null 2>&1; then
         missing_tools+=("cargo")
     fi
@@ -203,7 +212,7 @@ run_tests() {
 
     print_info "Test command: ${test_cmd[*]}"
 
-    if "${test_cmd[@]}"; then
+    if python3 scripts/e2e_binary.py run --features "$RUSTFS_BUILD_FEATURES" -- "${test_cmd[@]}"; then
         print_success "All tests passed!"
         return 0
     else

scripts/run_ecstore_validation_suite.sh

@@ -243,9 +243,10 @@ run_quick_e2e_steps() {
     return
   fi
 
-  run_step "e2e-reliability-disk-fault" cargo test --package e2e_test reliability_disk_fault_test -- --nocapture
+  run_step "build-e2e-server" python3 scripts/e2e_binary.py build
-  run_step "e2e-heal-erasure-disk-rebuild" cargo test --package e2e_test heal_erasure_disk_rebuild_test -- --nocapture
+  run_step "e2e-reliability-disk-fault" python3 scripts/e2e_binary.py run -- cargo test --package e2e_test reliability_disk_fault_test -- --nocapture
-  run_step "e2e-namespace-lock-quorum" cargo test --package e2e_test namespace_lock_quorum_test -- --nocapture
+  run_step "e2e-heal-erasure-disk-rebuild" python3 scripts/e2e_binary.py run -- cargo test --package e2e_test heal_erasure_disk_rebuild_test -- --nocapture
+  run_step "e2e-namespace-lock-quorum" python3 scripts/e2e_binary.py run -- cargo test --package e2e_test namespace_lock_quorum_test -- --nocapture
 }
 
 run_quick_profile() {
@@ -313,15 +314,15 @@ write_blackbox_matrix() {
 
 	  {
 	    printf 'profile\tscenario\tgate\tcommand\tfixture_env\tstatus\n'
-	    printf 'quick\tsingle-node disk fault read/write\tblack-box\tcargo test --package e2e_test reliability_disk_fault_test -- --nocapture\tnone\t%s\n' "$e2e_status"
+	    printf 'quick\tsingle-node disk fault read/write\tblack-box\tpython3 scripts/e2e_binary.py run -- cargo test --package e2e_test reliability_disk_fault_test -- --nocapture\tnone\t%s\n' "$e2e_status"
-	    printf 'quick\theal degraded erasure disk rebuild\tblack-box\tcargo test --package e2e_test heal_erasure_disk_rebuild_test -- --nocapture\tnone\t%s\n' "$e2e_status"
+	    printf 'quick\theal degraded erasure disk rebuild\tblack-box\tpython3 scripts/e2e_binary.py run -- cargo test --package e2e_test heal_erasure_disk_rebuild_test -- --nocapture\tnone\t%s\n' "$e2e_status"
-	    printf 'quick\tnamespace lock quorum under EC ops\tblack-box\tcargo test --package e2e_test namespace_lock_quorum_test -- --nocapture\tnone\t%s\n' "$e2e_status"
+	    printf 'quick\tnamespace lock quorum under EC ops\tblack-box\tpython3 scripts/e2e_binary.py run -- cargo test --package e2e_test namespace_lock_quorum_test -- --nocapture\tnone\t%s\n' "$e2e_status"
 	    printf 'full\tlegacy bitrot read fixture restore\tfixture\tcargo test -p rustfs-ecstore --test legacy_bitrot_read_test -- --nocapture\tRUSTFS_LEGACY_TEST_ROOT,RUSTFS_LEGACY_TEST_DISK\t%s\n' "$legacy_status"
 	    printf 'full\tMinIO generated encrypted read and negative restore fixture\tfixture\tcargo test -p rustfs --features rio-v2 storage::minio_generated_read_test --lib -- --ignored --nocapture\tRUSTFS_MINIO_FIXTURE_ROOT,RUSTFS_MINIO_STATIC_KMS_KEY_B64\t%s\n' "$minio_status"
 	    printf 'full\tS3 multipart range versioning delete subset\tblack-box\tenv TESTEXPR=\"multipart or range or versioning or delete\" DEPLOY_MODE=build MAXFAIL=0 ./scripts/s3-tests/run.sh\tnone\t%s\n' "$s3_status"
-	    printf 'destructive\tdistributed cluster concurrency\tblack-box\tcargo test --package e2e_test cluster_concurrency_test -- --nocapture\tnone\t%s\n' "$destructive_status"
+	    printf 'destructive\tdistributed cluster concurrency\tblack-box\tpython3 scripts/e2e_binary.py run -- cargo test --package e2e_test cluster_concurrency_test -- --nocapture\tnone\t%s\n' "$destructive_status"
-	    printf 'destructive\tstale multipart cleanup cluster\tblack-box\tcargo test --package e2e_test stale_multipart_cleanup_cluster_test -- --nocapture\tnone\t%s\n' "$destructive_status"
+	    printf 'destructive\tstale multipart cleanup cluster\tblack-box\tpython3 scripts/e2e_binary.py run -- cargo test --package e2e_test stale_multipart_cleanup_cluster_test -- --nocapture\tnone\t%s\n' "$destructive_status"
-	    printf 'destructive\tdelete marker migration semantics\tblack-box\tcargo test --package e2e_test delete_marker_migration_semantics_test -- --nocapture\tnone\t%s\n' "$destructive_status"
+	    printf 'destructive\tdelete marker migration semantics\tblack-box\tpython3 scripts/e2e_binary.py run -- cargo test --package e2e_test delete_marker_migration_semantics_test -- --nocapture\tnone\t%s\n' "$destructive_status"
 	  } >"$BLACKBOX_MATRIX"
 }
 
@@ -566,9 +567,9 @@ run_destructive_profile() {
     return
   fi
 
-  run_step "e2e-cluster-concurrency" cargo test --package e2e_test cluster_concurrency_test -- --nocapture
+  run_step "e2e-cluster-concurrency" python3 scripts/e2e_binary.py run -- cargo test --package e2e_test cluster_concurrency_test -- --nocapture
-  run_step "e2e-stale-multipart-cleanup-cluster" cargo test --package e2e_test stale_multipart_cleanup_cluster_test -- --nocapture
+  run_step "e2e-stale-multipart-cleanup-cluster" python3 scripts/e2e_binary.py run -- cargo test --package e2e_test stale_multipart_cleanup_cluster_test -- --nocapture
-  run_step "e2e-delete-marker-migration-semantics" cargo test --package e2e_test delete_marker_migration_semantics_test -- --nocapture
+  run_step "e2e-delete-marker-migration-semantics" python3 scripts/e2e_binary.py run -- cargo test --package e2e_test delete_marker_migration_semantics_test -- --nocapture
 }
 
 run_fuzz_profile() {

scripts/test_e2e_binary.py

@@ -0,0 +1,314 @@
+#!/usr/bin/env python3
+"""Exercise the E2E build/run boundary without compiling RustFS."""
+
+import json
+import os
+from pathlib import Path
+import shutil
+import signal
+import subprocess
+import sys
+import tempfile
+import unittest
+
+
+class BinaryProvenanceTests(unittest.TestCase):
+    def setUp(self):
+        self.temp = tempfile.TemporaryDirectory()
+        self.addCleanup(self.temp.cleanup)
+        self.root = Path(self.temp.name)
+        (self.root / "scripts").mkdir()
+        shutil.copy(Path(__file__).with_name("e2e_binary.py"), self.root / "scripts/e2e_binary.py")
+        (self.root / "Cargo.toml").write_text("[workspace]\n")
+        (self.root / "source.rs").write_text("original source\n")
+        (self.root / ".gitignore").write_text("/target/\n/rustfs/static/\n")
+        (self.root / ".agents/skills").mkdir(parents=True)
+        (self.root / ".agents/skills/SKILL.md").write_text("tracked instructions\n")
+        (self.root / ".claude").mkdir()
+        (self.root / ".claude/skills").symlink_to("../.agents/skills", target_is_directory=True)
+        subprocess.run(["git", "init", "-q", str(self.root)], check=True)
+        for args in (["add", "."], ["-c", "user.name=Test", "-c", "user.email=test@example.com", "commit", "-qm", "fixture"]):
+            subprocess.run(["git", "-C", str(self.root), *args], check=True)
+        self.commands = self.root / "target/commands"
+        self.commands.mkdir(parents=True)
+        cargo = self.commands / "cargo"
+        cargo.write_text(f"#!{sys.executable}\n" + '''import json, os, pathlib, sys
+if os.environ.get("FAKE_BUILD_FAIL"):
+    raise SystemExit(23)
+args = sys.argv[1:]
+if args[:2] == ["nextest", "run"]:
+    receipt = json.loads(pathlib.Path(os.environ["RUSTFS_E2E_BINARY_RECEIPT"]).read_text())
+    assert pathlib.Path(receipt["binary"]) == pathlib.Path(os.environ["CARGO_BIN_EXE_rustfs"]).resolve()
+    if os.environ.get("RUSTFS_E2E_STARTUP_CAS_BINARY"):
+        assert pathlib.Path(receipt["binary"]) == pathlib.Path(os.environ["RUSTFS_E2E_STARTUP_CAS_BINARY"]).resolve()
+    pathlib.Path("target/nextest-command.json").write_text(json.dumps(args))
+    raise SystemExit(int(os.environ.get("FAKE_TEST_EXIT", "0")))
+target = pathlib.Path(args[args.index("--target-dir") + 1])
+binary = target / ("release" if "--release" in args else "debug") / "rustfs"
+binary.parent.mkdir(parents=True, exist_ok=True)
+binary.write_text("#!/bin/sh\\nexit 0\\n")
+binary.chmod(0o755)
+features = ["default", "ftps", "webdav"]
+if "--features" in args:
+    features.extend(args[args.index("--features") + 1].split(","))
+if "full" in features:
+    features.extend(["sftp", "swift", "metrics-gpu", "pyroscope"])
+print(json.dumps({"reason": "compiler-artifact", "target": {"name": "rustfs", "kind": ["bin"]}, "executable": str(binary), "features": sorted(set(features))}))
+if os.environ.get("FAKE_BUILD_MUTATE"):
+    pathlib.Path("source.rs").write_text("changed during build")
+''')
+        cargo.chmod(0o755)
+        rustc = self.commands / "rustc"
+        rustc.write_text("#!/bin/sh\nprintf 'rustc fixture\\nhost: fixture\\n'\n")
+        rustc.chmod(0o755)
+        self.env = dict(os.environ, PATH=f"{self.commands}{os.pathsep}{os.environ['PATH']}")
+        for name in ("CARGO_TARGET_DIR", "CARGO_BIN_EXE_rustfs", "RUSTFS_BUILD_FEATURES", "RUSTFS_E2E_BINARY_RECEIPT"):
+            self.env.pop(name, None)
+        self.binary = self.root / "target/debug/rustfs"
+        self.sidecar = self.binary.with_name("rustfs.e2e.json")
+
+    def invoke(self, *args, env=None):
+        return subprocess.run([sys.executable, str(self.root / "scripts/e2e_binary.py"), *args], cwd=self.root, env=env or self.env, text=True, capture_output=True)
+
+    def build(self, features=""):
+        result = self.invoke("build", "--features", features)
+        self.assertEqual(result.returncode, 0, result.stderr)
+
+    def run_code(self, code="pass", features="", env=None):
+        return self.invoke("run", "--features", features, "--", sys.executable, "-c", code, env=env)
+
+    def test_build_run_and_receipt_cleanup(self):
+        self.build("full,e2e-test-hooks")
+        result = self.run_code("import os,pathlib; print(os.environ['RUSTFS_E2E_BINARY_RECEIPT']); assert pathlib.Path(os.environ['CARGO_BIN_EXE_rustfs']).is_file(); assert 'sftp' in os.environ['RUSTFS_BUILD_FEATURES']", "e2e-test-hooks,full")
+        self.assertEqual(result.returncode, 0, result.stderr)
+        self.assertFalse(Path(result.stdout.strip()).exists(), "run receipts must not survive their command")
+        self.assertIn("sftp", json.loads(self.sidecar.read_text())["features"])
+
+    def test_source_changes_are_not_hidden_by_timestamps_or_head(self):
+        self.build()
+        path = self.root / "source.rs"
+        old = path.stat()
+        path.write_text("different bytes\n")
+        os.utime(path, ns=(old.st_atime_ns, old.st_mtime_ns))
+        self.assertNotEqual(self.run_code().returncode, 0)
+
+    def test_deleted_untracked_and_ignored_embedded_inputs(self):
+        for mutation in ("delete", "untracked", "static"):
+            with self.subTest(mutation=mutation):
+                self.build()
+                path = self.root / "source.rs"
+                if mutation == "delete":
+                    path.unlink()
+                elif mutation == "untracked":
+                    (self.root / "new.rs").write_text("new source")
+                else:
+                    static = self.root / "rustfs/static"
+                    static.mkdir(parents=True)
+                    (static / "index.html").write_text("embedded content")
+                self.assertNotEqual(self.run_code().returncode, 0)
+                path.write_text("original source\n")
+
+    def test_wrong_binary_features_and_manifest_fail_closed(self):
+        self.build("sftp")
+        self.assertNotEqual(self.run_code(features="webdav").returncode, 0)
+        self.binary.write_text("old server")
+        self.assertNotEqual(self.run_code(features="sftp").returncode, 0)
+        self.sidecar.write_text("{}")
+        self.assertNotEqual(self.run_code(features="sftp").returncode, 0)
+        self.sidecar.unlink()
+        self.assertNotEqual(self.run_code(features="sftp").returncode, 0)
+
+    def test_build_failure_or_source_race_does_not_leave_a_receipt(self):
+        for failure in ("FAKE_BUILD_FAIL", "FAKE_BUILD_MUTATE"):
+            self.build()
+            result = self.invoke("build", env=dict(self.env, **{failure: "1"}))
+            self.assertNotEqual(result.returncode, 0)
+            self.assertFalse(self.sidecar.exists())
+
+    def test_child_failure_and_changes_during_run_fail(self):
+        self.build()
+        failed = self.run_code("raise SystemExit(37)")
+        self.assertEqual(failed.returncode, 37, failed.stderr)
+        for code in ("import pathlib; pathlib.Path('source.rs').write_text('changed while testing')", "import pathlib; pathlib.Path('target/debug/rustfs').write_text('different server')"):
+            self.build()
+            self.assertNotEqual(self.run_code(code).returncode, 0)
+
+    def test_override_cannot_select_an_unverified_server(self):
+        self.build()
+        result = self.run_code(env=dict(self.env, CARGO_BIN_EXE_rustfs="/some/old/server"))
+        self.assertNotEqual(result.returncode, 0)
+
+    def test_artifact_moves_between_clean_checkouts(self):
+        self.build()
+        with tempfile.TemporaryDirectory() as destination:
+            clone = Path(destination) / "clone"
+            subprocess.run(["git", "clone", "-q", str(self.root), str(clone)], check=True)
+            (clone / "target/debug").mkdir(parents=True)
+            shutil.copy2(self.binary, clone / "target/debug/rustfs")
+            shutil.copy2(self.sidecar, clone / "target/debug/rustfs.e2e.json")
+            result = subprocess.run([sys.executable, str(clone / "scripts/e2e_binary.py"), "run", "--", sys.executable, "-c", "pass"], cwd=clone, env=self.env, text=True, capture_output=True)
+            self.assertEqual(result.returncode, 0, result.stderr)
+
+    def test_ci_build_preserves_both_manifests_and_runs_the_copied_server(self):
+        from check_test_wiring import yaml_block
+        from test_security_workflow import named_steps, shell_body
+
+        source = (Path(__file__).resolve().parents[1] / ".github/workflows/ci.yml").read_text().splitlines()
+        build_steps = named_steps(yaml_block(source, "build-rustfs-debug-binary", 2))
+        run_steps = named_steps(yaml_block(source, "e2e-full", 2))
+        (self.root / "Cargo.lock").write_text("fixture lock\n")
+        subprocess.run(["git", "add", "Cargo.lock"], cwd=self.root, check=True)
+        subprocess.run(["git", "-c", "user.name=Test", "-c", "user.email=test@example.com", "commit", "-qm", "lock"], cwd=self.root, check=True)
+        copied = self.root / "target/startup-cas-input/rustfs"
+        env = dict(self.env, STARTUP_CAS_INPUT=str(copied.parent), RUSTFS_E2E_STARTUP_CAS_BINARY=str(copied))
+        for step in (build_steps["Build debug binary"], run_steps["Preserve startup CAS binary input"]):
+            result = subprocess.run(["bash", "-e", "-o", "pipefail", "-c", shell_body(step)], cwd=self.root, env=env, capture_output=True, text=True)
+            self.assertEqual(result.returncode, 0, result.stderr)
+        for name in ("rustfs.e2e.json", "rustfs.e2e-startup-cas-build.json"):
+            self.assertIn("            target/debug/" + name, build_steps["Upload debug binary"])
+            self.assertEqual((self.binary.parent / name).read_bytes(), (copied.parent / name).read_bytes())
+        manifest = json.loads(copied.with_name("rustfs.e2e-startup-cas-build.json").read_text())
+        self.assertEqual(manifest["argv"], ["python3", "scripts/e2e_binary.py", "build", "--bins", "--features", "e2e-test-hooks"])
+        self.assertTrue(manifest["clean_before"] and manifest["clean_after"])
+        body = next(line.removeprefix("        run: ") for line in run_steps["Run e2e full suite"] if line.startswith("        run: "))
+        for status in (0, 23):
+            result = subprocess.run(["bash", "-e", "-o", "pipefail", "-c", body], cwd=self.root, env=dict(env, FAKE_TEST_EXIT=str(status)), capture_output=True, text=True)
+            self.assertEqual(result.returncode, status, result.stderr)
+        copied.write_text("replaced preserved binary")
+        result = subprocess.run(["bash", "-e", "-o", "pipefail", "-c", body], cwd=self.root, env=env, capture_output=True, text=True)
+        self.assertNotEqual(result.returncode, 0)
+
+    def test_distributed_workflow_runs_both_filter_branches_with_receipts(self):
+        from check_test_wiring import yaml_block
+        from test_security_workflow import named_steps, shell_body
+
+        source = (Path(__file__).resolve().parents[1] / ".github/workflows/e2e-distributed.yml").read_text().splitlines()
+        steps = named_steps(yaml_block(source, "distributed", 2))
+        result = subprocess.run(["bash", "-e", "-o", "pipefail", "-c", shell_body(steps["Build rustfs binary"])], cwd=self.root, env=self.env, capture_output=True, text=True)
+        self.assertEqual(result.returncode, 0, result.stderr)
+        for selected in ("", "test(distributed::s3_basic)"):
+            for status in (0, 23):
+                result = subprocess.run(["bash", "-e", "-o", "pipefail", "-c", shell_body(steps["Run distributed 4-node e2e suite"])], cwd=self.root, env=dict(self.env, FILTER=selected, FAKE_TEST_EXIT=str(status)), capture_output=True, text=True)
+                self.assertEqual(result.returncode, status, result.stderr)
+                argv = json.loads((self.root / "target/nextest-command.json").read_text())
+                self.assertEqual(argv, ["nextest", "run", "--profile", "e2e-distributed", "-p", "e2e_test", *(["-E", selected] if selected else ["--no-tests=fail"])])
+
+    def test_target_directory_and_profile_are_explicit(self):
+        env = dict(self.env, CARGO_TARGET_DIR="target/custom")
+        built = self.invoke("build", "--profile", "release", env=env)
+        self.assertEqual(built.returncode, 0, built.stderr)
+        run = self.invoke("run", "--profile", "release", "--", sys.executable, "-c", "pass", env=env)
+        self.assertEqual(run.returncode, 0, run.stderr)
+        self.assertNotEqual(self.invoke("run", "--", sys.executable, "-c", "pass", env=env).returncode, 0)
+
+    def test_target_directory_cannot_hide_source_inputs(self):
+        for target in (str(self.root), str(self.root / "crates"), str(self.root.parent)):
+            with self.subTest(target=target):
+                result = self.invoke("build", env=dict(self.env, CARGO_TARGET_DIR=target))
+                self.assertNotEqual(result.returncode, 0)
+                self.assertIn("CARGO_TARGET_DIR", result.stderr)
+        tracked = self.root / "target/tracked.rs"
+        tracked.write_text("tracked build input")
+        subprocess.run(["git", "add", "-f", "target/tracked.rs"], cwd=self.root, check=True)
+        self.build()
+        tracked.write_text("changed tracked build input")
+        self.assertNotEqual(self.run_code().returncode, 0)
+
+    def test_unsupported_embedded_directory_links_fail_closed(self):
+        self.build()
+        destination = self.root / "target/embedded-assets"
+        destination.mkdir()
+        (destination / "index.html").write_text("untracked embedded input")
+        static = self.root / "rustfs/static"
+        static.mkdir(parents=True)
+        (static / "linked-assets").symlink_to(destination, target_is_directory=True)
+        self.assertNotEqual(self.run_code().returncode, 0)
+
+    def test_directory_aliases_cannot_hide_unrecorded_inputs(self):
+        self.build()
+        target = self.root / ".agents/skills/SKILL.md"
+        target.write_text("changed instructions\n")
+        self.assertNotEqual(self.run_code().returncode, 0)
+        self.build()
+        (target.parent / ".gitignore").write_text("hidden.rs\n")
+        (target.parent / "hidden.rs").write_text("ignored build input\n")
+        result = self.invoke("build")
+        self.assertNotEqual(result.returncode, 0)
+        self.assertIn("unrecorded input", result.stderr)
+        alias = self.root / ".claude/skills"
+        alias.unlink()
+        with tempfile.TemporaryDirectory() as external:
+            alias.symlink_to(external, target_is_directory=True)
+            result = self.invoke("build")
+            self.assertNotEqual(result.returncode, 0)
+            self.assertIn("escapes the source inventory", result.stderr)
+
+    def test_directory_alias_indirection_is_part_of_the_identity(self):
+        for name in ("first", "second"):
+            directory = self.root / name
+            directory.mkdir()
+            (directory / "input.rs").write_text(name)
+        selection = self.root / "target/selection"
+        selection.symlink_to(self.root / "first", target_is_directory=True)
+        (self.root / "source-alias").symlink_to("target/selection", target_is_directory=True)
+        self.build()
+        selection.unlink()
+        selection.symlink_to(self.root / "second", target_is_directory=True)
+        self.assertNotEqual(self.run_code().returncode, 0)
+
+    def test_existing_embedded_files_and_symlink_targets_are_hashed(self):
+        static = self.root / "rustfs/static"
+        static.mkdir(parents=True)
+        index = static / "index.html"
+        index.write_text("embedded version one")
+        external = self.root / "target/embedded-file"
+        external.write_text("linked version one")
+        (static / "linked.html").symlink_to(external)
+        self.build()
+        index.write_text("embedded version two")
+        self.assertNotEqual(self.run_code().returncode, 0)
+        self.build()
+        external.write_text("linked version two")
+        self.assertNotEqual(self.run_code().returncode, 0)
+
+    def test_each_run_hashes_binary_twice_and_never_calls_cargo(self):
+        script = self.root / "scripts/e2e_binary.py"
+        script.write_text(script.read_text().replace("def file_hash(path):\n", "def file_hash(path):\n    if path.name == 'rustfs':\n        with (ROOT / 'target/hash-count').open('a') as count:\n            count.write('hash\\n')\n"))
+        self.build()
+        count = self.root / "target/hash-count"
+        count.write_text("")
+        result = self.run_code(env=dict(self.env, FAKE_BUILD_FAIL="1"))
+        self.assertEqual(result.returncode, 0, result.stderr)
+        self.assertEqual(count.read_text().splitlines(), ["hash", "hash"])
+
+    def test_concurrent_build_or_run_is_rejected(self):
+        self.build()
+        command = [sys.executable, str(self.root / "scripts/e2e_binary.py"), "run", "--", sys.executable, "-c", "print('ready', flush=True); input()"]
+        with subprocess.Popen(command, cwd=self.root, env=self.env, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE, text=True) as process:
+            self.assertEqual(process.stdout.readline().strip(), "ready")
+            try:
+                for args in (("build", "--features", "sftp"), ("run", "--", sys.executable, "-c", "pass")):
+                    rejected = self.invoke(*args)
+                    self.assertNotEqual(rejected.returncode, 0)
+                    self.assertIn("Another E2E build/run", rejected.stderr)
+            finally:
+                output, error = process.communicate("\n", timeout=10)
+            self.assertEqual(process.returncode, 0, error + output)
+        self.assertFalse(self.binary.with_name("rustfs.e2e.lock").exists())
+
+    def test_interruption_cleans_receipt_and_releases_ownership(self):
+        self.build()
+        for signum in (signal.SIGINT, signal.SIGTERM):
+            command = [sys.executable, str(self.root / "scripts/e2e_binary.py"), "run", "--", sys.executable, "-c", "import os; print(os.environ['RUSTFS_E2E_BINARY_RECEIPT'], flush=True); input()"]
+            with subprocess.Popen(command, cwd=self.root, env=self.env, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE, text=True) as process:
+                receipt = Path(process.stdout.readline().strip())
+                self.assertTrue(receipt.is_file())
+                process.send_signal(signum)
+                process.communicate(timeout=10)
+                self.assertNotEqual(process.returncode, 0)
+            self.assertFalse(receipt.exists())
+            self.assertFalse(self.binary.with_name("rustfs.e2e.lock").exists())
+
+
+if __name__ == "__main__":
+    unittest.main()

scripts/test_security_workflow.py

@@ -837,6 +837,55 @@ emit_step_result() {
             self.assertIn(value, contents)
         self.assertNotIn("OLD RUN EVIDENCE", contents)
 
+    def test_performance_commands_bind_runner_selection_and_preserve_failures(self) -> None:
+        self.prepare("performance")
+        source = self.source.splitlines()
+        job = yaml_block(source, "performance-test", 2)
+        runner = WorkflowSteps()
+        runner.directory = self.directory / "workspace with spaces"
+        scripts = runner.directory / "auto-testing"
+        scripts.mkdir(parents=True)
+        wrapper = scripts / "rustfs_performance_test.sh"
+        wrapper.write_text(f"#!{sys.executable}\nimport json, os, sys\n" +
+                           "print(json.dumps({'args': sys.argv[1:], 'env': {key: os.environ.get(key) for key in " +
+                           "('RUSTFS_BENCH_SCRIPT', 'RUSTFS_WARP_METHODS', 'RUSTFS_WARP_SIZES', " +
+                           "'RUSTFS_WARP_DURATION', 'RUSTFS_WARP_CONCURRENCY', 'WARP_METHODS', " +
+                           "'WARP_SIZES', 'WARP_DURATION', 'WARP_CONCURRENCY')}}))\n" +
+                           "sys.exit(int(os.environ['FAKE_BENCH_EXIT']))\n")
+        wrapper.chmod(0o755)
+        runner.steps = named_steps(job)
+        for methods, sizes, duration, concurrency in (
+            ("get", "1KiB", "1s", "7"), ("all", "all", "5m", "64"), ("", "", "5m", "64")
+        ):
+            runner.context = {"github.workspace": str(runner.directory), "inputs.test_method": methods,
+                              "inputs.object_size": sizes, "inputs.warp_duration || '5m'": duration,
+                              "inputs.warp_concurrency || '64'": concurrency}
+            runner.env = {**self.env, "RUSTFS_BENCH_SCRIPT": "/unverified/home-script.sh",
+                          "RUSTFS_WARP_METHODS": "put", "RUSTFS_WARP_SIZES": "64MiB",
+                          "RUSTFS_WARP_DURATION": "99h", "RUSTFS_WARP_CONCURRENCY": "2",
+                          "WARP_DURATION": "88h", "WARP_CONCURRENCY": "3", "WARP_METHODS": "mixed", "WARP_SIZES": "32MiB",
+                          "LOG_FILE": str(self.directory / "suite.log")}
+            runner.env.update(runner.step_env(job, indent=4))
+            for step, number in (("Run benchmark (GET/PUT/MIXED)", "5"), ("Analyze results", "6")):
+                for code in (0, 42):
+                    with self.subTest(methods=methods, sizes=sizes, step=step, exit=code):
+                        runner.env["FAKE_BENCH_EXIT"] = str(code)
+                        result = runner.run_step(step)
+                        self.assertEqual(result.returncode, code, result.stderr)
+                        invocation = json.loads(result.stdout)
+                        expected = ["--step", number, "-y", "--log-file", runner.env["LOG_FILE"]]
+                        self.assertEqual(invocation["args"], expected)
+                        self.assertEqual(invocation["env"]["RUSTFS_BENCH_SCRIPT"], str(scripts / "rustfs_performance_testing.sh"))
+                        self.assertEqual(invocation["env"]["RUSTFS_WARP_METHODS"], methods)
+                        self.assertEqual(invocation["env"]["RUSTFS_WARP_SIZES"], sizes)
+                        self.assertEqual(invocation["env"]["RUSTFS_WARP_DURATION"], duration)
+                        self.assertEqual(invocation["env"]["RUSTFS_WARP_CONCURRENCY"], concurrency)
+                        if number == "6":
+                            self.assertEqual(invocation["env"]["WARP_METHODS"], methods)
+                            self.assertEqual(invocation["env"]["WARP_SIZES"], sizes)
+                            self.assertEqual(invocation["env"]["WARP_DURATION"], duration)
+                            self.assertEqual(invocation["env"]["WARP_CONCURRENCY"], concurrency)
+
 
 if __name__ == "__main__":
     unittest.main()