* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* test(scanner): add G09 upgrade evidence runner
Add a reusable Linux x86_64 runner for the Scanner/Heal G09 mixed-version and rollback upgrade evidence lanes.
The helper reads the pinned previous-release asset metadata from the upgrade workflow, verifies the downloaded binary, builds the current head, runs both ignored E2E tests, and fails unless the expected G09 JSON artifacts exist.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(ci): preserve reported functional suite failures
* fix(ci): isolate functional evidence and preserve every result
* fix(ci): exclude sensitive scratch files from suite artifacts
Problem: the nightly functional chain has not completed end-to-end.
Evidence from recent runs:
- workflow_run events are fire-and-forget: after KMS finished at 17:09Z
on 8/31 no tier run was created; rustfs-storage-test.yml has never run.
- 'if: conclusion == success' gates skip downstream suites on any
failure (security was skipped after pool failed on 9/1 01:48Z).
- rustfs-pool-expand-test.yml embedded a heal pass without
continue-on-error, so a heal failure failed the whole workflow.
Fixes:
- Add rustfs-functional-chain.yml: entry point that dispatches the first
suite via repository_dispatch; each suite hands off to the next with an
explicit, re-drivable API call instead of workflow_run triggers.
- Split heal out of the pool workflow (renamed to RustFS Pool Expansion
Test): heal now runs exactly once per chain, in rustfs-heal-test.yml
(storage -> heal -> pool).
- Every suite job gets continue-on-error so a failing test never fails
the workflow; failures are filed as issues in rustfs/backlog (report
+ redacted log tail) and the chain moves on.
- Clone rustfs/auto-testing with the PF token via 'gh repo clone' plus a
5-attempt retry loop (transient clone failures aborted whole suites).
- Stop rewriting functional/index.html from every suite (divergent
copies raced each other with stale SHAs); the canonical index now
lives in the dashboard repo.
- Standalone workflow_dispatch runs are unchanged and never forward the
chain; performance runs on its own runner, dispatched in parallel.
The test workflows checkout the private rustfs/auto-testing repository, but
the default GITHUB_TOKEN only has access to rustfs/rustfs, so every checkout
failed with 'repository ... not found' (nightly runs on 2026-08-28).
Pass secrets.PF_TESTING_GH_TOKEN (the existing cross-repo PAT already used
by the performance workflow) to the auto-testing checkout steps in all three
workflows.
houseme