Validate the selected G09 evidence lane before process-substitution case expansion so --plan-only cannot turn an unknown --test value into an empty successful plan.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* fix(targets): reject trailing batch items (#7508)
* test(scanner): emit G09 release bundle gate evidence
Write a bundle-ready G09 gate descriptor from the Linux upgrade evidence runner and validate the single G09 gate with the shared release-bundle rules without approving the full Scanner/Heal release.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: cui fliter <imcusg@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* test(e2e): add G09 upgrade evidence runner
Add a Linux x86_64 runner that downloads the pinned previous release, builds the current RustFS binary, runs the mixed-version and rollback upgrade compatibility lanes, and verifies the required Scanner/Heal G09 raw evidence artifacts.
Document the runner and add a shell self-test for help, dry-run, SHA validation, and non-empty artifact directory guards.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* fix(targets): reject trailing batch items (#7508)
* fix(scanner): respect cargo target dir in G09 runner
Write the RustFS feature stamp under the resolved Cargo target directory so remote validation hosts with CARGO_TARGET_DIR set can reuse the built PR-head binary.
Extend the runner plan/self-test path to cover relative target-dir resolution.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: cui fliter <imcusg@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* fix(targets): reject trailing batch items (#7508)
* test(scanner): preflight G09 evidence disk space
Fail the Scanner/Heal G09 upgrade evidence runner before downloading or building when the validation host does not have enough free space for a full raw evidence pass.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: cui fliter <imcusg@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* test(scanner): add G09 upgrade evidence runner
Add a reusable Scanner/Heal G09 runner for Linux PR-head validation. The script downloads the pinned previous release, builds the current checkout, runs the mixed-version and rollback upgrade E2E lanes, and validates the measured raw artifacts before they can be consumed by the release bundle gate.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(replication): close the GA blocker set from backlog#2366 (#7503)
* fix(replication): close GA blockers from backlog#2366
Implements the P1 set from the pre-GA replication audit:
- Replication rule tag filters now require every And.Tag to match, replacing
the s3s OR semantics with a local AND matcher that fails closed on a
malformed tag.
- A replicated group membership change no longer writes the group status, so
a membership update carrying the default Enabled status cannot silently
re-enable a disabled group on the peer.
- A successful IAM import schedules one collapsed full-IAM snapshot per remote
peer instead of leaving the imported entities local-only.
- A pending endpoint refresh is redriven by the heavyweight reconcile tick,
carries its own ilm-expiry override, and no longer blocks a remove that
drops every unacknowledged peer.
- Site metrics expose local replication failure totals and rolling windows;
node-level counters no longer report a constructed zero.
- set/remove-remote-target notify peer metadata caches before returning, so a
follow-up put-bucket-replication on another node sees the target.
- Adds the site-replication operations runbook, a docs index, a replication
support boundary section, and the Replication changelog section.
* fix(site-replication): resume only a locally driven endpoint refresh
The peer-side edit handler journals a pending endpoint refresh with an empty
`remote_peers` map and commits it inside the same request through
`apply_internal_peer_edit`. The reconcile tick could not tell that journal
from the coordinator's own: with no required peers it reads as complete on
sight, so the tick committed it with `edit_state` - losing the local-name
sync - and cleared it under the request that owned it, whose commit then
reported the refresh as changed and denied the coordinator the peer
acknowledgement it was waiting for.
Resume now runs only for a journal that carries the fan-out topology. A
receiver's journal stays for the coordinator to redrive with the same
refresh id, which is the path that already recovers it.
* fix(site-replication): keep an explicit disabled group status on a snapshot
Skipping the group-status write whenever an item carries members stopped a
membership change from re-enabling a disabled group, but it also silenced the
full-IAM snapshot, which always sends members together with the sender's real
status. A peer that did not have the group yet created it through
`GroupInfo::new` - enabled - so a bootstrap, a repair, or the snapshot an IAM
import now schedules handed every member of a frozen group live access there.
The madmin wire maps an unset `groupStatus` to Enabled, so only Enabled can be
a default. Disabled is always explicit and is applied again.
* fix(site-replication): schedule the import snapshot without recording a failure
`import-iam` reused the failure-recording path to queue its full-IAM
snapshot. That raises `retry_count` on every call, so three imports - the
normal shape of a bulk migration done one archive at a time - escalated a
healthy peer to `retryStats.failed` with the scheduling note shown as
`lastError`, which is exactly the signal the runbook tells operators to
repair. A full retry queue also turned a completed import into a 503.
Scheduling now only ensures the collapsed entry exists, and a failure to
schedule is logged instead of failing the request: the entities are already
imported and the reconcile pass still closes the gap.
* fix(admin): stop reporting replication failures as retries
`retries` is the minio-go counter for redeliveries, and mc prints it as such.
Filling it with the failure count claimed a redelivery that never happens: a
failed object is not retried by an event today, it waits for the scanner heal
pass. `errors` keeps the failure counters; `retries` stays zero until there is
a real redelivery to count, and the runbook now says so.
* perf(site-replication): aggregate failure windows without cloning bucket stats
`site_metrics_snapshot` went through `get_all`, which clones every bucket's
stats, and then scanned each target's sample deque twice. That deque is
bounded only by the one-hour window, so an unreachable target under load -
the case an operator polls this endpoint for - made every
`mc admin replicate status` copy the whole backlog and hold the read lock
against the failure path while doing it.
It now folds under the read lock and takes both windows in one walk. The
`max` against the serialized `last_minute` / `last_hour` snapshots is dropped:
those are stamped onto per-bucket clones elsewhere and are always zero in this
node-local cache.
* fix(site-replication): reject a conflicting ilm-expiry override on a re-run
The commit now reads the ilm-expiry override back out of the pending refresh
journal, so a second edit that asks for a different value had it dropped while
the request still reported success. Re-running without the flag keeps pinning
the recorded value - that is the documented way to redrive a stuck refresh -
but an explicit different value is now rejected instead of ignored.
* fix(admin): do not fail a remote-target write on a peer reload error
set/remove-remote-target propagated the peer metadata reload error, so a
target that was already persisted and live on this node reported a 5xx to the
client whenever one peer could not be reached. Every S3 bucket-config write
path treats that reload as best effort and only warns; these two admin
handlers now do the same, and the reason is logged with the bucket and action.
* fix(site-replication): undo every bucket a cut-short refresh rewrote
When a remove accepted on another node clears the refresh journal mid-pass,
only the bucket holding the lock at that moment had its restored target
undone. The buckets rewritten earlier in the same pass kept a target pointing
at the removed peer whenever the remove's own cleanup had already walked past
them. The undo now covers every bucket this pass rewrote, attempting all of
them so one failure does not strand the rest.
* fix(site-replication): keep replay running while an endpoint refresh is pending
A pending endpoint refresh took the whole heavyweight pass with it, so a peer
that never came back froze IAM and bucket replay to every healthy peer too -
the stall this journal's resume path was meant to end. The refresh arm now
drains the retry queue before returning; it replays per-peer deliveries
against the endpoints currently committed in state, so it is unaffected by the
edit in flight. Bucket wiring reconciliation still waits, because it rewrites
the very targets the refresh is changing, and the runbook now says so.
* test(e2e): cover the AND semantics of a two-tag replication filter
The acceptance matrix only had a single-tag rule, which matches under both AND
and OR semantics and therefore proved nothing about the filter this fix
changed. It now also carries a two-tag `And` rule - the shape
`mc replicate add --tags "k1=v1&k2=v2"` writes - and asserts that an object
with one of the two tags is not admitted while an object with both is.
No new test function, so the nightly selection digest is unchanged.
* refactor(site-replication): fold the refresh state-change error into one constructor
The endpoint-refresh work added three `s3_error!` invocation lines, which the
s3s footprint ratchet is meant to prevent. Five copies of the same
concurrent-change error now share one constructor, so the surface nets one
line smaller than main; the baseline is retightened to match.
* fix(site-replication): report a peer whose IAM snapshot waits for a repair
An escalated snapshot entry records a deletion a snapshot cannot replay, so
only a repair settles it and the marker must survive. Scheduling an import
snapshot therefore leaves that peer's entry alone - and now says so, instead
of returning success while nothing was scheduled for it.
* docs(operations): state the group-status and escalation convergence limits
Two boundaries the fixes in this branch make load-bearing: a membership change
never carries an enable, so a group disabled on one site only has to be
re-enabled there explicitly; and a peer holding an escalated IAM entry does
not receive a scheduled snapshot, including the one a bulk import schedules,
until a repair settles it.
* fix(ci): bind performance runs to selected inputs (#7512)
* test(scanner): add G09 upgrade evidence runner
Add a reusable Linux x86_64 runner for the Scanner/Heal G09 mixed-version and rollback upgrade evidence lanes.
The helper reads the pinned previous-release asset metadata from the upgrade workflow, verifies the downloaded binary, builds the current head, runs both ignored E2E tests, and fails unless the expected G09 JSON artifacts exist.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
---------
Co-authored-by: 唐小鸭 <tangtang1251@qq.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Merge main at 73957d0faf into release. Resolve the multipart test conflict with the current main fixture and remove its superseded ReadPlan test export.
Require the P4 release bundle to carry measured cleanup/GC soak evidence for retained MRF replay responsibilities. The bundle now needs a two-hour cleanup window, exact cleanup case coverage, observed verified idle GC, and zero pending responsibilities or stale journals after GC.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Require P4 retained-responsibility release bundle evidence to list the retained replay anchor and idle cleanup cases, prove a two-hour retention window, and record both idle cleanup and verified-proof discharge observations.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Require scanner/heal release evidence JSON artifacts to repeat their measured source revision, run identity, measurement window, gate, and field identity inside the artifact payload. This keeps a refreshed outer bundle hash from accepting stale summary or profile JSON from another run.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Require the Scanner/Heal release registry and bundle checker to carry explicit G08 MRF capacity, disk-full, and replica-loss evidence fields before release approval can pass.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Tighten the Scanner/Heal release bundle checker so G14 same-window evidence must name the EC8+4, multi-set, and multi-pool fields covered in that measurement window.
Keep the release gate blocked when same-window evidence omits one of the required G14 fields, without changing production runtime behavior.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Require Scanner/Heal release bundle artifact paths to resolve to non-empty files before hashing them.
Cover empty hard-gate artifacts in the existing release bundle checker self-test and keep profile artifact size checking on the shared artifact boundary.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Give Scanner/Heal evidence cases explicit runtime profiles so EC8+4 background restart and crash cases use their own object count, object size, and partial-progress timeout defaults instead of inheriting the legacy 4x1 case assumptions.
Expose the runtime profile in plan-only output and cover every registry case in the script self-test.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Reject measured Scanner/Heal ABBA manifests whose mixed-version evidence uses the same baseline and candidate source revision or binary hash.
Require crash fault modes and profile artifact names to match the exact supported sets, rejecting missing, duplicate, and unknown values.
Update harness fixtures and regression coverage for same-build mixed-version claims and exact-set release evidence fields.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Tighten the Scanner/Heal release bundle checker so mixed-version, scoped-ACK, and rollback fields cannot reuse a generic versions list without proving the expected evidence role.
Require version lists to use source revision identities and include the tested source revision. Also require profile evidence fields to name the core profiling artifacts before release approval.
The release gate remains blocked until measured field evidence is present.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Register and wire Scanner/Heal background target restart and crash evidence cases for the 3x4 EC8+4 topology.
Validate the observed data/parity geometry in scanner-heal evidence receipts so multi-drive runs cannot satisfy the gate without proving EC8+4 metadata.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Require Scanner/Heal release bundle fields to carry source, run, window, timestamp, command, and artifact format provenance before a measured gate can pass.
Keep EC8+4 and performance gate fields tied to a single measurement window so unrelated artifacts cannot be stitched into a release approval.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Keep the synthetic ABBA test adapter aligned with the measured release evidence contract so result validation covers release_evidence drift.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Retry heal-control RPCs once after transport auth rejects a stale replay-scope epoch, and add a distributed EC8+4 restart heal evidence case that rebuilds a replaced drive with exact shard/body assertions.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Require explicit scanner/heal release evidence field contracts for the scoped ACK and mixed-version rollback gates.
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* test(scanner): measure heal pacing and cache cost
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(error): merge equivalent api message branches
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(heal): cleanup consumed MRF replay journals
Do not retain Accepted or Merged replay intents as startup anchors after they have been handed to the heal manager. Only refused or still-pending replay records keep the journal on disk until a successor snapshot can persist them.
This keeps successor snapshots limited to the pending queue, which lets successful replay remove both authoritative and legacy journal paths and restores the crash-boundary tests around successor flush.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
(cherry picked from commit d5b8f49c9d)
---------
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
* test(scanner): report heal release gate status
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(error): merge equivalent api message branches
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(heal): cleanup consumed MRF replay journals
Do not retain Accepted or Merged replay intents as startup anchors after they have been handed to the heal manager. Only refused or still-pending replay records keep the journal on disk until a successor snapshot can persist them.
This keeps successor snapshots limited to the pending queue, which lets successful replay remove both authoritative and legacy journal paths and restores the crash-boundary tests around successor flush.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
(cherry picked from commit d5b8f49c9d)
---------
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
* fix(scanner): retain raw enumeration quantum
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(error): merge equivalent api message branches
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(heal): cleanup consumed MRF replay journals
Do not retain Accepted or Merged replay intents as startup anchors after they have been handed to the heal manager. Only refused or still-pending replay records keep the journal on disk until a successor snapshot can persist them.
This keeps successor snapshots limited to the pending queue, which lets successful replay remove both authoritative and legacy journal paths and restores the crash-boundary tests around successor flush.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
(cherry picked from commit d5b8f49c9d)
---------
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
* test: summarize scanner heal perf artifacts
Add a quiet Scanner/Heal performance artifact summarizer that normalizes ABBA report verdicts, key regression metrics, cache-cost profile records, and provenance hashes for CI or PR handoff.
Document the summary command in the scanner benchmark runbook and cover measured, synthetic, pending, and invalid cache-cost paths with focused Python tests.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(error): merge equivalent api message branches
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
* fix(heal): cleanup consumed MRF replay journals
Do not retain Accepted or Merged replay intents as startup anchors after they have been handed to the heal manager. Only refused or still-pending replay records keep the journal on disk until a successor snapshot can persist them.
This keeps successor snapshots limited to the pending queue, which lets successful replay remove both authoritative and legacy journal paths and restores the crash-boundary tests around successor flush.
Co-Authored-By: heihutu <heihutu@gmail.com>
Co-Authored-By: zhi22915 <qiuzgang@gmail.com>
(cherry picked from commit d5b8f49c9d)
---------
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Co-authored-by: Zhengchao An <anzhengchao@gmail.com>
houseme