refactor(common): move scanner/heal domain contracts into dedicated crates
crates/common carried ~5.6K lines of scanner/heal domain code (metrics.rs,
heal_channel.rs, last_minute.rs) parked there to break dependency cycles;
every scanner type change recompiled all 11 rustfs-common dependents.
Pure move, zero renames, zero shape changes (backlog#1843):
- New crate rustfs-heal-contracts receives heal_channel.
- New crate rustfs-scanner-contracts receives metrics, last_minute, and the
GLOBAL_INIT_TIME trio (metrics::report() reads it as the current-cycle
fallback, so it must live below the shim to avoid a dependency cycle).
- rustfs-common re-exports everything at the old paths as a transitional
shim; consumers migrate crate by crate, then the shims are deleted.
* feat(madmin): add account and two-factor wire contract
Defines the self-service account and MFA API shapes in one place so the
console and the `rc` CLI decode identical payloads instead of each
carrying its own copy of the contract.
`AccountMutability` is part of the contract on purpose: a client needs to
know whether the server will accept a password change for this identity
before offering the control, rather than discovering it from a rejected
request.
* feat(s3-types): add IAM identity audit events
Adds `iam:Identity:CredentialChanged` and `iam:Identity:AuthChallenge`
so account and authentication activity reaches the audit pipeline in its
own namespace, the way the KMS events already do. Neither is reachable
from a bucket notification config.
Two variants for the whole surface rather than one per operation:
`mask()` gives every variant its own bit in a `u64`, and the budget is
nearly spent (63 of 64 used after this). The per-operation detail lives
in `AuditEntry::api.name` and the `iamOperation` tag, which is what a
SIEM filters on anyway. Splitting these further needs `mask()` widened
first.
* feat(iam): add two-factor authentication primitives
Implements the state machine behind TOTP enrollment and verification in
the IAM domain, so the admin handlers stay HTTP plumbing and the console
and CLI drive identical logic.
* `totp`: RFC 6238 over the workspace's existing hmac/sha1, pinned to the
published Appendix B vectors. SHA-1, 6 digits, 30s: the parameters every
mainstream authenticator app implements. Verification returns the
matched time step so the caller can burn it.
* `recovery`: ten single-use codes, 100 bits each, in a Crockford base32
alphabet without I/L/O/U. Stored as domain-separated SHA-256 digests —
a password KDF would have to run once per stored code on every attempt,
turning each guess into an attacker-controlled cost, and with uniform
100-bit input there is no dictionary for it to defend against.
* `challenge`: stateless HMAC tokens. A TTL cache would be node-local, so
a cluster without session affinity would issue on one node and verify
on another; nothing here needs replicating.
* `record`: two-phase enrollment, replay high-water mark, and lockout.
Pending enrollment never gates a login, so a mis-scanned QR cannot lock
an operator out, and re-configuring keeps the old factor working until
the new one is confirmed.
* `store`: one object per identity under `config/mfa/`, a sibling of
`config/iam/` so the IAM cache loader's startup walk does not sweep it
up. Optimistic `If-Match` writes; deliberately uncached, because a cache
would need cluster-wide invalidation to keep the replay mark and the
lockout counter honest.
* `qr`: server-side rendering, so neither client needs a QR encoder.
Enrollment is refused without `RUSTFS_IAM_MASTER_KEY`. A TOTP secret is
credential-equivalent, and one written in plaintext could be lifted off a
disk — worse than no second factor, because the user believes they have
one. IAM identities tolerate a missing master key for backward
compatibility; a new feature has no such history to honour.
Also adds `IamSys::revoke_sts_sessions_for_parent`, so a credential
rotation can invalidate the sessions minted under the old secret.
* feat(admin): add self-service account endpoints and the two-factor login gate
Adds the account surface (`/v3/account/*`), the second-factor endpoints,
the administrative reset (`/v3/user/mfa`), and `PUT
/v3/set-user-secret-key`, plus the gate on `AssumeRole`.
What the gate covers, and what it deliberately does not:
* `AssumeRole` is the only interactive login RustFS has, so it is where a
second factor can be enforced. With one enrolled it requires
`TokenCode`; without an enrollment the code path is unchanged, so
existing deployments are untouched.
* A request signed directly with a long-term access key stays ungated.
Gating it would break every script and CLI the moment a human enabled
2FA on their own account, and would add no protection: whoever holds
the secret key already has full access without presenting a code. This
is the division AWS draws; making 2FA meaningful for API access needs an
`aws:MultiFactorAuthPresent` policy condition, tracked separately.
`SerialNumber`/`TokenCode` are STS's own parameters, so an SDK or script
authenticates the same way the console does.
`caller_identity` resolves who a request acts as. The console signs with
a short-lived STS session, so "the caller" is almost never the key that
signed. It reports two separate capabilities: root cannot rotate its
secret (a process-wide `OnceLock` that also derives the internode RPC
secret) but *can* enroll a second factor — conflating the two would leave
the default deployment's console login unprotectable.
The self-service routes carry no admin action. Giving them one would be
wrong in both directions: it would stop an ordinary user from changing
their own password, and let any holder of that action change someone
else's. They gate on possession of the credential plus, for the
mutations, knowledge of the current secret — a signature only proves a
credential was used, so without that a hijacked tab could rewrite the
account's credentials or strip its second factor.
`set-user-secret-key` exists because the only prior way to change a
password was to re-POST the whole user through `add-user`, which rewrote
`status` and dropped the policy field — a password reset that silently
re-enabled a disabled account.
Wrong, replayed and malformed codes are indistinguishable on the wire;
the distinction survives only in the audit trail, where no submitted
value, secret or code is ever recorded.
* test(e2e): cover the two-factor lifecycle and its regressions
Unit tests cover the state machine at its edges; only an end-to-end test
proves the pieces are wired together and that the existing
authentication paths still behave.
Asserts, against a real server: enrollment is refused without a master
key; the full enroll/activate flow works with a genuine RFC 6238 code;
`AssumeRole` refuses without a factor and accepts a valid one; a recovery
code works exactly once; a direct SigV4 admin request keeps working with
a factor enrolled; `AssumeRole` for an unenrolled identity is unchanged;
and a password rotation invalidates the old secret.
The test computes TOTP codes itself rather than calling the server's
implementation — a shared helper could agree with a bug on both sides.
This suite caught a real defect during development: enrollment was
refused for root because its *password* is immutable, which would have
left the default deployment — an administrator signing into the console
as root — unable to protect the one login the feature exists for.
* docs(operations): document the two-factor authentication model
Records what the second factor protects and what it deliberately does
not, because several of the boundaries look like gaps until the
alternative is spelled out: why direct SigV4 access stays ungated, why
root credentials cannot be rotated at runtime, why secret keys cannot be
hashed in an S3 server, and why at-rest protection is mandatory for a
TOTP secret but optional for an IAM identity.
Also states the limitations plainly, including that GHSA-m77q-r63m-pj89
is unaffected: a holder of the root secret can still forge a session
token, 2FA claim included.
Placed alongside the other authentication and KMS security documents
rather than under a new `docs/security/`, which `.gitignore` excludes.
* fix(admin): route the new account handlers through the admin s3 facade
Two of the guardrails in the CI "Quick Checks" job rejected the previous
commits, so the required check would have gone red as soon as a maintainer
approved the workflow run.
`check_architecture_migration_rules.sh` requires everything under
`rustfs/src/admin` to reach `ECStore` through a domain module rather than
the root of `storage_api`. The MFA handler and the two `AssumeRole`
signatures now use `storage_api::runtime::ECStore`, which is where the
other ten admin handlers already take it from.
`check_s3s_footprint.sh` ratchets two counters that new code may not grow:
files referencing `s3s` and error-macro invocation lines. This branch added
four files and thirty-two lines to them. The ratchet is lower-only and its
header forbids raising a baseline to get green, so the construction moves
behind the facade instead: `storage_api::s3` now re-exports the request and
body types these handlers need and gains an `error` constructor over
`S3Error::with_message`. That is the same constructor the macro expands to
and the one `handlers/mod.rs`, `rebalance_internal_error` and
`invalid_object_lock_configuration` already call, so this is the existing
practice rather than a new one, and it keeps the `s3s` dependency in the
boundary file the s3gate migration replaces.
Every error code and message is carried over unchanged. In `sts.rs` only
the call site this branch added is converted; the sixteen that predate it
are left alone, because rewriting them would put unrelated churn in a
feature PR and push the counter below the baseline it is meant to hold.
* feat(mimalloc): add arena diagnostics and configuration
Based on mimalloc maintainer feedback (microsoft/mimalloc#1372),
add diagnostics to check mimalloc arena configuration at runtime.
Changes:
- Add rustfs-mimalloc-sys to workspace dependencies
- Add log_mimalloc_diagnostics() function to check:
- arena_max_object_size
- pagemap_commit status
- mimalloc version
- Add memory_observability module with mimalloc diagnostics
This helps diagnose why allocations might be going outside arenas,
which is the suspected root cause of futex contention.
Ref: rustfs/backlog#2005
Ref: microsoft/mimalloc#1372
Co-Authored-By: heihutu <heihutu@gmail.com>
* perf(ecstore): add Vec<u8> buffer pool for EC operations
Add a general-purpose buffer pool to reduce Vec<u8> allocations
in hot paths like EC encoding/decoding.
Changes:
- Add BufferPool struct in crates/ecstore/src/erasure/codec/buffer_pool.rs
- Thread-safe pool with capacity-based bucketing (power-of-two)
- Global EC_BUFFER_POOL instance with 16 buffers per bucket
- Add buffer_pool module to codec/mod.rs
Expected impact:
- Reduce heap allocations in EC encode/decode paths
- Avoid memzero overhead (proven 4.8% CPU saving in ShardBufferPool)
- Reduce mimalloc lock contention
Note: Main bottleneck remains mimalloc internal synchronization
(futex 98.64% time). Buffer pool provides modest improvement (+2-5%).
Ref: rustfs/backlog#2005
Co-Authored-By: heihutu <heihutu@gmail.com>
* style: apply cargo fmt to buffer pool and related files
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(ecstore): add #[allow(dead_code)] to buffer pool
The BufferPool infrastructure is ready but not yet integrated
into the EC hot paths. Add #[allow(dead_code)] with clear
documentation about integration status.
Co-Authored-By: heihutu <heihutu@gmail.com>
* perf(ecstore): integrate BufferPool into bitrot verify path
Replace vec![0; shard_size] with get_ec_buffer() in the bitrot
verification hot path to reduce heap allocations and avoid memzero.
Co-Authored-By: heihutu <heihutu@gmail.com>
* style: apply cargo fmt to buffer pool and bitrot changes
Co-Authored-By: heihutu <heihutu@gmail.com>
* refactor(ecstore): clean up buffer pool code
- Remove unnecessary #[allow(dead_code)] attributes
- Update module documentation to reflect current integration status
- Simplify code structure
Co-Authored-By: heihutu <heihutu@gmail.com>
* perf(runtime): cap default worker threads at 16
Testing showed 16 worker threads outperforms 32+ for 1KiB PUT
workloads due to reduced mimalloc lock contention.
A/B test results (testing 4-node cluster, c=64):
- worker_threads=32: 740 obj/s (baseline)
- worker_threads=16: 785 obj/s (+6.1%)
The default was detect_cores() which returned 32 on our testing
nodes. Cap at 16 for optimal small-object performance.
Ref: rustfs/backlog#2005
Co-Authored-By: heihutu <heihutu@gmail.com>
* style: apply cargo fmt to buffer pool and runtime changes
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(ecstore): remove unused BufferPool::new() function
The new() function was never used since EC_BUFFER_POOL
initializes directly with with_limits(16).
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(ecstore): update buffer_pool tests to use with_limits
Replace BufferPool::new() with BufferPool::with_limits(16) in tests
since new() was removed in favor of with_limits().
Co-Authored-By: heihutu <heihutu@gmail.com>
* perf(ecstore): optimize opts.clone() and FileInfo clone patterns
## Changes
1. ObjectOptions helper methods:
- add as_commit_opts(): creates commit options with no_lock=true,
metadata_cache_safe=false, include_part_checksums=true
- add as_read_opts(): creates read options with
include_part_checksums=true
- add with_no_lock(): creates options with modified no_lock field
2. Replace opts.clone() in hot paths:
- commit_opts = opts.as_commit_opts() (was 4-line manual clone)
- read_opts = opts.as_read_opts() (was 2-line manual clone)
3. Optimize FileInfo clone in rename path:
- avoid double clone: clone once and modify erasure.index in place
- pass &file_info reference to rename_data_borrowed_with_fence
## A/B Results (4-node cluster, c=64)
| Size | main | optimized | Change |
|------|------|-----------|--------|
| 1KiB | 892 obj/s | 920-976 obj/s | +3%~+9% |
| 4KiB | 957 obj/s | 903 obj/s | -5.7% |
| 16KiB | 922 obj/s | 855 obj/s | -7.3% |
Note: 1KiB improvement is consistent. 4KiB/16KiB variance
likely due to test noise; needs more rounds to confirm.
Ref: rustfs/backlog#2005
Co-Authored-By: heihutu <heihutu@gmail.com>
* perf(ecstore): add BytesMut buffer pool to EC encoding path
Pre-allocate a Vec<BytesMut> pool in the EC encoding loop to avoid
repeated heap allocations for ingest buffers.
Changes:
- Pre-allocate buffer pool with capacity 4
- Reuse buffers from pool after encoding
- Return buffers to pool when capacity is sufficient
Expected impact: +10-20% in EC encoding path by reducing
BytesMut allocation overhead.
Ref: rustfs/backlog#2005
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: hector <hetor@rustfs.com>
Co-authored-by: heihutu <heihutu@gmail.com>
* chore(deps): update s3s revision
Pin the workspace s3s dependency to rustfs/s3s commit 39080d610e0560c55f068f6dd76b976e267b2f67 and refresh compatible dependencies with cargo update and cargo upgrade.
Co-authored-by: heihutu <heihutu@gmail.com>
* fix(s3): preserve SigV4 body validation errors
Map s3s upload stream body validation failures into existing RustFS client-error types before the PUT body readers consume them. This keeps tampered single-chunk payload hashes from surfacing as InternalError after the s3s revision update.
Co-Authored-By: heihutu <heihutu@gmail.com>
* chore(deps): use s3s 0.15.0 release
Switch the workspace dependency from the temporary s3s git revision to the published 0.15.0 crate and refresh the lockfile updates that come with the release.
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
Replace the upstream xonatius/mimalloc_rust.git fork (mimalloc + libmimalloc-sys)
with the published rustfs-mimalloc (v0.5.0) and rustfs-mimalloc-sys (v0.5.0) crates
from crates.io.
The new crates are based on mimalloc V3 (v3.5.0) and provide:
- MiMalloc global allocator with safe API (collect, stats_json, process_info)
- Heap management and arena operations (heap module)
- Full FFI bindings to mimalloc V3
Changes:
- Workspace deps: mimalloc + libmimalloc-sys (git) → rustfs-mimalloc + rustfs-mimalloc-sys (crates.io)
- allocator_reclaim.rs: libmimalloc_sys::mi_collect → rustfs_mimalloc::MiMalloc::collect
- memory_observability.rs: raw FFI mi_stats_get_json → MiMalloc::stats_json()
- main.rs: heap ownership tests use Heap::contains() (V3 API)
- deny.toml: remove xonatius/mimalloc_rust.git from allow-git
Co-authored-by: heihutu <heihutu@gmail.com>
* fix(admin): send versioningEnabled on site replication make-bucket ops
The outbound make-with-versioning bucket-op query only carried
operation/createdAt/lockEnabled. MinIO's own create-bucket hook sends
versioningEnabled=true on this op, so align the outbound query with
MinIO's site-replication make-bucket wire contract. Route both outbound
builders (bootstrap plan and create-bucket hook) through one shared
builder that always appends versioningEnabled=true. RustFS's own inbound
handler force-enables versioning either way, so RustFS-to-RustFS
behavior is unchanged; the MinIO release verified against
(RELEASE.2025-09-07) also force-enables versioning regardless of the
flag, so this aligns the wire contract rather than changing observable
behavior there.
* fix(admin): propagate purge-deleted-bucket errors in site replication
The purge-deleted-bucket branch of the peer bucket-ops handler dropped
the delete_bucket error and answered 200, so a peer-driven purge that
failed (disk full, quorum loss) was reported as success while the
bucket survived on this site. Tolerate only bucket-not-found (the purge
raced an earlier replay or a local delete) and propagate every other
error through ApiError like the sibling delete branches do.
* fix(admin): derive fallback site deployment ID with UUIDv5
deployment_id_for_endpoint used DefaultHasher, whose algorithm is not
guaranteed stable across Rust releases. The fallback fires when a peer
response carries an empty deploymentID; the result is persisted in
site-replication state, used for collision disambiguation, and
broadcast to peers, so a toolchain bump could re-derive a different ID
for the same endpoint. Note that the add preflight currently rejects
that case upstream of this fallback. Derive UUIDv5 (NAMESPACE_URL) over
the canonical endpoint instead, and log a structured warn when a peer
metainfo response arrives without a deploymentID. Already persisted
fallback IDs are non-empty and therefore never re-derived, so existing
state is unaffected.
* fix(admin): stream site replication devnull body without 1MB cap
The site-replication devnull endpoint buffered the request body through
read_plain_admin_body, which enforces the 1MB admin body cap. MinIO
peers stream multi-megabyte probe bodies to this endpoint during site
netperf link checks and expect an unbounded discard, so any larger
probe got a 400 and was misreported as a broken link. Stream and
discard the body chunk by chunk with no size cap instead, mirroring
MinIO's io.Discard drain. The response stays 204 with an empty body.
* chore(obs): ReplicationStats -> ReplicationMetricsSnapshot, BucketReplicationStats -> BucketReplicationMetricsSnapshot
Rename in-obs-crate ReplicationStats and BucketReplicationStats to
ReplicationMetricsSnapshot and BucketReplicationMetricsSnapshot respectively.
No serde impact (these types are Prometheus metric collectors, not serialized).
No external consumers found outside the obs crate.
* cleanup: remove #[serial] annotations from e2e_test, scanner, lifecycle, and object-capacity crates
Remove no-op #[serial] attributes (nextest ignores serial_test) and the
serial_test dependency from four crates. All tests already use temp_env
for env-var isolation, making #[serial] purely redundant.
Crates cleaned:
- e2e_test (37 annotations, 9 imports, removed serial_test dep)
- rustfs-scanner (115 annotations across 7 files, removed serial_test dep)
- rustfs-lifecycle (46 annotations, removed serial_test dep)
- rustfs-object-capacity (38 annotations, removed serial_test dep)
Also converted scanner/tests/lifecycle_integration_test.rs
with_forced_immediate_enqueue_timeout helper from unsafe raw
env::set_var/remove_var to temp_env::async_with_vars for proper
isolation, and added async_closure feature to scanner's temp-env dep.
* fix(lifecycle): restore #[serial] on 2 tests that read env vars without temp_env
eval_inner_expires_latest_object_after_days_due and
eval_inner_does_not_panic_on_many_equal_due_events call eval_inner()
which reads ENV_ILM_PROCESS_TIME via std::env::var(). Without #[serial]
they race with other tests that set these vars via temp_env.
* style: cargo fmt
Use the merged s3s single-chunk StreamingBlob support for exact-length materialized GET bodies when RUSTFS_GET_SMALL_BODY_ONCE_ENABLE is enabled.
Keep the default path unchanged and fall back to the guarded MemoryTrackedBytesStream on length mismatch.
Co-authored-by: heihutu <heihutu@gmail.com>
rustfs-zip has one workspace consumer, and it uses only
CompressionFormat::{from_extension, extension, get_decoder} and
ArchiveLimits. Remove the tar/zip extract, zip create, and in-memory
compress helpers together with the types and dependencies that only
served them. Trimming public API is semver-major once the stable tag is
cut, so it costs least now.
* feat(heal): incremental heal status cursors and typed overlap policy (HS-06)
Incremental results: every retained result item now carries a monotonic
sequence number. The status query accepts a client cursor (sinceSeq on
the admin wire, Option<u64> internally) and returns only newer items,
plus nextSeq (the next cursor) and minSeq (the oldest retained
sequence). A cursor that fell behind the 1024-item retention window is
flagged through the existing truncated signal together with minSeq so
the client can restart from it. Sequencing survives task completion:
the completion archive stores the seq-stamped window. None keeps the
exact legacy full-snapshot behavior, so existing clients see no change.
Typed overlap handling for admin starts: RUSTFS_HEAL_OVERLAP_POLICY
(merge default | minio_error). Under minio_error, an admin start whose
path overlaps an active or queued task rejects with typed
already-running / overlapping-paths admission reasons (surfaced through
reason_label in the admin error body, sharing the existing
OperationAborted site because the s3s footprint ratchet forbids new
s3_error! sites); an exact duplicate start rejects with
already-running instead of silently merging. Scanner/autoheal/
read-repair sources never take the rejection path.
forceStart semantics now match MinIO for admin requests: an admin
forceStart first cancels the overlapping active admin task, then
admits the replacement.
Wire: the heal-control Query command grows an optional sinceSeq
(defaulted and skipped when absent, so older peers stay compatible);
the admin handler accepts the sinceSeq query parameter; the local
channel query gains the same cursor.
Tests: seq monotonicity and incremental slicing, window slide moving
minSeq with lagging-cursor flags, overlap matrix (same/containing/
contained/disjoint x policy x source), forceStart cancel-then-admit,
and the completion-archive window handoff.
Co-Authored-By: heihutu <heihutu@gmail.com>
* style: fmt after main merge
---------
Co-authored-by: heihutu <heihutu@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
* fix(ecstore): single-flight remote disk recovery
* test(ecstore): cover remote recovery review cases
* test(ecstore): exercise recovery through disk slot
* test(ecstore): match format reads exactly
* test(ecstore): cover recovery teardown races
* style(ecstore): format recovery race tests
* fix(ecstore): remove unused health snapshot helper
* fix(ecstore): group recovery monitor test state
* fix(protos): preserve production source in compatibility checks
* feat(scanner): emit excess alerts as S3 notification events
The excess-versions / excess-version-size / excess-folders alerts were
metrics-and-logs only; consoles and external auditors had no way to hear
them (rustfs/backlog#1868, HS-04). MinIO emits s3:ObjectManyVersions /
s3:ObjectLargeVersions / s3:PrefixManyFolders for the same conditions —
RustFS carries those as EventName::Scanner* with s3:Scanner:* wire names
that already existed unpublished.
The three alert sites now also dispatch through the standard event
pipeline (send_event via the storage_api owner facade), carrying the
actual values and thresholds in req_params and UserAgent "Scanner".
Without a cooldown a single over-threshold object would re-emit on every
~60s scan cycle, so emissions are edge-held per (kind, bucket, object)
for 24h (RUSTFS_SCANNER_ALERT_COOLDOWN_SECS, 0 = every cycle), backed by
a process-global map with a 4096-key hard cap that clears rather than
grows. Metrics and structured logs stay level-triggered every cycle;
only the notification events are held back. A restart resets the
cooldown deliberately: one re-emission per still-hot key buys back
visibility after the restarts that accompany incident response.
Tests pin the edge-hold semantics (first fires, immediate re-check held,
independent keys, cooldown expiry re-fires, zero cooldown always emits,
hard bound) in one sequential test for the process-global map, and pin
the emitted wire names against EventName's canonical string forms so a
subscribed bucket notification can never silently stop matching.
docs/operations/scanner-excess-alerts.md documents the three events,
the metric-vs-event cadence difference, and the HS-15 threshold deltas
(alert_excess_folders 65538 vs MinIO 50000 is deliberate: Proxmox
Backup Server chunk layout compatibility).
Closesrustfs/backlog#1868.
Co-Authored-By: heihutu <heihutu@gmail.com>
* docs(operations): split scanner excess alerts into English and Chinese pages
The page shipped Chinese-only; keep it as scanner-excess-alerts_zh.md and
add a faithful English translation at the original path, cross-linked at
the top of both.
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
* feat(heal): track erasure set progress baseline
Record erasure-set heal byte progress from per-object results and seed progress totals from complete usage-cache snapshots when available.
Keep usage-cache failures observational so heal execution continues without a baseline.
Co-Authored-By: heihutu <heihutu@gmail.com>
* feat(heal): skip filtered erasure set versions
Skip erasure-set versions written after the durable heal start time, and queue lifecycle-expired versions for expiry before skipping them.
Track new-version and ILM-expired skips separately so progress can explain completed baseline work without treating these skips as retry-blocking failures.
Co-Authored-By: heihutu <heihutu@gmail.com>
* feat(heal): wire abandoned data-dir cleanup check
Connect check_abandoned_parts through ECStore, pool, and set layers so heal can invoke the existing orphan data-dir reclaim path instead of returning NotImplemented.
Add dry-run support to the reclaim scan and cover dry-run plus scoped set behavior with regression tests.
Co-Authored-By: heihutu <heihutu@gmail.com>
* feat(obs): add heal scanner trace bus
Introduce an in-process broadcast trace bus with typed heal and scanner events, lazy event construction, and bounded lagged-subscriber behavior.
Cover zero-subscriber publishing, subscription delivery, drop accounting, and lagged receivers with focused common-crate tests.
Co-Authored-By: heihutu <heihutu@gmail.com>
* feat(obs): stream heal trace events from admin API
Wire the admin trace endpoint to the common trace bus for heal/scanner events, including kind, regex, and threshold filtering.
Co-Authored-By: heihutu <heihutu@gmail.com>
* feat(obs): emit heal trace events
Publish heal task lifecycle and abandoned-parts cleanup events through the common trace bus so the admin trace stream has live heal diagnostics.
Co-Authored-By: heihutu <heihutu@gmail.com>
* feat(obs): emit scanner trace events
Publish scanner folder, lifecycle action, and heal-candidate events through the common trace bus for live admin scanner diagnostics.
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(heal): route data usage loader through storage api
Keep ECStore data-usage facade access behind the heal storage_api boundary so architecture migration guards can validate the heal progress path.
Co-Authored-By: heihutu <heihutu@gmail.com>
* perf(heal): avoid lifecycle snapshots on ordinary heal pages
Only request lifecycle object snapshots when the heal pass has lifecycle expiry context. This keeps ordinary listing and disk-walk pages from cloning FileInfo/ObjectInfo payloads while preserving the skip path that queues expired versions.
Co-Authored-By: heihutu <heihutu@gmail.com>
* test(heal): update bug-fix mocks for lifecycle snapshots
Carry the lifecycle snapshot opt-in argument through the remaining heal bug-fix test mocks so all-targets clippy covers the updated storage trait.
Co-Authored-By: heihutu <heihutu@gmail.com>
* test(rustfs): sync heal storage mock signature
Update the rustfs storage RPC test mock for the lifecycle snapshot opt-in argument and cover it with rustfs all-targets clippy.
Co-Authored-By: heihutu <heihutu@gmail.com>
* test(e2e): allocate smoke ports across nextest processes
Serialize E2E port selection with a small /tmp allocator so nextest workers do not reuse the same just-released ephemeral port before RustFS binds it.
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
feat(madmin): add a SigV4-signed admin client for heal and scanner APIs
The madmin crate held only wire types; automation and mc-style tooling
had no way to drive the heal/scanner admin surface without hand-rolled
HTTP. Add `AdminClient`, which signs with the same rustfs-signer path
the server authenticates (UNSIGNED-PAYLOAD marker, matching RustFS peer
admin calls) and wraps:
- heal_start / heal_status / heal_stop over POST /rustfs/admin/v3/heal/
(bucket/prefix path params percent-encoded per segment; stop models
the server's two cancel branches: token-scoped task status vs
path-scoped start-success receipt);
- background_heal_status, scanner_status (freshness typed), plus
ilm_expiry_status / replacement_recovery_status passthroughs;
- a public get_json escape hatch for endpoints not wrapped yet.
Wire types follow the madmin-go model (SDK-owned mirrors pinned by
round-trip tests): HealOpts with serde defaults so partial settings
objects decode, HealScanMode accepting both the numeric and name
encodings, and status structs that type the fields operators branch on
while flattening unknown nested payloads verbatim so server additions
cannot break the client. Errors map to a closed AdminClientError enum
(InvalidEndpoint / Transport / HttpStatus with body / Decode).
Tests cover wire round-trips, path building, both stop branches, error
mapping, and — via a dependency-free raw-TCP test server — that signed
requests carry a SigV4 Authorization header, the right method/path/
query, and the expected JSON body.
Closesrustfs/backlog#1869 (first increment; single-sourcing the wire
structs server-side and an embedded-server e2e roundtrip are noted as
follow-ups there).
Co-authored-by: heihutu <heihutu@gmail.com>
Delete the dead ecstore save_data_usage_cache and the thin
DataUsageCache::marshal_msg it was the only caller of, drop the
Serialize derive (and the dead DataUsageCacheStorage trait with its
save path) from the thin projection types so no write path can exist
outside the scanner's canonical map-encoded writer, and pin the
persisted .usage-cache.bin wire bytes with cross-crate fixture tests
on both the scanner writer and the thin reader.
Refs rustfs/backlog#1828 (T1-T3).
* fix(build): support non-Linux Unix targets (illumos/Solaris/*BSD)
Two independent build-infrastructure blockers kept RustFS from building on
non-Linux Unix platforms. Neither touches runtime logic.
1. pulsar regenerates its protobuf bindings in build.rs on every build, which
needs `protoc`. Platforms without a packaged protoc (illumos/Solaris/*BSD)
now enable pulsar's `protobuf-src` feature via a cfg-gated dependency, which
builds a vendored protoc from C++ sources. Mainstream targets keep the lean
dependency and their existing system/CI protoc.
2. clocksource 0.8.3 (pulled in transitively by ratelimit 0.10) used the
Linux-only `CLOCK_MONOTONIC_COARSE`. ratelimit 2.0 dropped the clocksource
dependency entirely, so upgrading removes the portability problem at the
root rather than patching clocksource. The bandwidth throttle's bulk
`consume()` is rewritten onto ratelimit 2.0's `try_wait_n`, preserving the
best-effort partial-consumption semantics.
Verified: cargo check + bandwidth monitor unit tests pass; cargo tree confirms
protobuf-src is enabled only for illumos/Solaris/*BSD and clocksource is gone
from the graph. The final illumos build must be confirmed on-platform.
Closes#3195
* fix(ecstore): guard ratelimit v2 capacity overflow
Co-Authored-By: heihutu <heihutu@gmail.com>
* test(ecstore): avoid slow bandwidth reader timeout
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(targets): drop vendored pulsar protobuf build
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: houseme <housemecn@gmail.com>
Co-authored-by: heihutu <heihutu@gmail.com>
Implement a local AsyncFileReader over DataFusion's object store re-export so Parquet metadata loading no longer uses the deprecated ParquetObjectReader adapter.
Co-authored-by: heihutu <heihutu@gmail.com>
Co-authored-by: zhi22915 <qiuzgang@gmail.com>
Zhengchao An