fix(ecstore): make body-cache hook re-registrable + add e2e regressions
ODC-21 (backlog#1126): the GET body-cache hook lived in a first-wins
OnceLock. When AppContext is rebuilt (config reload, test re-init) a fresh
ObjectDataCacheAdapter is constructed and re-registered, but the OnceLock
kept ecstore's GET probe pointed at adapter #1 while every usecase-layer
fill and invalidation targeted adapter #2 — silently degrading the feature
to a 0% hit rate with no error, log, or metric, and stranding entries in the
unreachable cache until their TTL.
Replace the slot with RwLock<Option<Arc<dyn GetObjectBodyCacheHook>>> so
re-registration atomically swaps to the newest adapter, and log at WARN when
a swap replaces a *different* instance (Arc::ptr_eq). RwLock over
ArcSwapOption because arc-swap's RefCnt is impl<T> (Sized, thin *mut T) and
cannot hold an Arc<dyn Trait> without a sized newtype wrapper; the probe
reads the slot once per full-object GET but only clones an Arc, negligible
next to the metadata quorum fan-out already done before the probe. Add a
test-only clear_get_object_body_cache_hook so tests register/unregister
deterministically.
With the hook now re-registrable, add true end-to-end regressions that drive
get_object_reader (not the full_object_plaintext_len predicate) against a
real erasure-coded, genuinely-compressed object via the blackbox
make_local_set_disks harness, with a stand-in hook playing the app-layer
cache (the injection point production uses; the adapter itself lives above
ecstore). These close the gap the predicate-only tests left — a caller that
opens a new shortcut serving the cached body directly, the original form of
both P0s:
- backlog#1108: a raw_data_movement_read must yield the STORED (compressed)
bytes, never the cached plaintext.
- backlog#1109: a compressed cache hit must publish the DECOMPRESSED length
as object_info.size (the UploadPartCopy invariant), with the streamed
length matching.
- backlog#1146: a restore read (restore_request.days) must serve STORED
bytes, not the cache.
Mutation-verified each e2e test bites: dropping the raw_data_movement_read
gate serves plaintext (fails #1108); removing the hit-site size republication
publishes 2972 vs 660000 (fails #1109); dropping the restore gate serves
plaintext (fails #1146).
Co-authored-by: heihutu <heihutu@gmail.com>
* refactor(obs): make dial9 telemetry opt-in and actually record events
The dial9 Tokio-runtime profiler was disabled by default, yet every build
paid for it, and enabling it produced trace files with no events in them.
Recorded empty traces
---------------------
`build_traced_runtime` called `TracedRuntime::builder()...build(..)`, but dial9
only starts recording in `build_and_start*`. `build` still returns a live guard
whose `is_enabled()` reports true, and still creates and seals segment files —
they just contain a header and no events. It also skipped `with_trace_path`, so
the background worker driving the segment pipeline was never spawned.
Measured on the new smoke example: 310 bytes of bare segment header, against
5640 bytes for the same workload once recording actually starts.
Switch to `with_trace_path(..).build_and_start(..)`.
Cost was unconditional
----------------------
`--cfg tokio_unstable` was a global `[build] rustflags` entry and `rustfs-obs`
depended on `dial9-tokio-telemetry` unconditionally, so all builds depended on
Tokio's non-semver API. Worse, an environment `RUSTFLAGS` replaces (never
appends to) the config-file value, so any caller exporting their own RUSTFLAGS
silently dropped the flag — the long comment in build.yml was a scar from that.
dial9 is now an opt-in feature (`dial9`, plus `dial9-s3` and `dial9-taskdump`),
the global rustflag is gone, and `crates/obs/build.rs` fails the compile if the
feature is on without the flag. Telemetry builds go through `make build-profiling`.
Metrics that could not lie
--------------------------
`rustfs_dial9_{events_total,bytes_written_total,rotations_total,cpu_overhead_percent}`
were hard-coded to zero — a Counter pinned at 0 reads as "nothing happened".
Removed. `rustfs_dial9_enabled` was sourced from the environment, so it read 1
even when the traced runtime failed and the process fell back to a standard
runtime; it is replaced by `rustfs_dial9_supported` (compile-time),
`rustfs_dial9_configured` (intent) and `rustfs_dial9_active_sessions` (reality).
No `writer_healthy` gauge is exported: dial9's `RotatingWriter` can enter its
`Finished` state and stop writing, but exposes no way to observe that, so the
gauge could only ever be hard-coded to 1. Documented as a known gap instead.
Final events were lost
----------------------
The `TelemetryGuard` lived in a `static OnceLock`, which is never dropped, so
buffered events were never flushed at exit. `build_tokio_runtime` now returns
the guard and `run_process` drops it before any exit path.
Also
----
- `disk_usage_bytes` was a `read_dir` + per-file `stat` on the metrics
collection path. It is now sampled by a background task into an atomic.
- `SAMPLING_RATE`/`S3_BUCKET`/`S3_PREFIX` were parsed, warned about, and
discarded. S3 upload is now wired to dial9's `with_s3_uploader` behind
`dial9-s3`; `SAMPLING_RATE` has no upstream equivalent and is removed.
- Wire `with_task_dumps` (async backtraces of stalled tasks), configurable via
`RUSTFS_RUNTIME_DIAL9_TASK_DUMP_{ENABLED,IDLE_THRESHOLD_MS}`.
- Split `telemetry/dial9.rs` into `config`/`state`/`enabled`/`disabled`; the
stub keeps the public API identical so callers need no `#[cfg]`.
- Drop four print-only examples and the manual test bin that exercised the
removed `init_session` scaffolding.
Verified: cargo check/clippy/test across default, `dial9`, and `dial9-s3`;
build.rs correctly rejects `dial9` without `--cfg tokio_unstable`;
`make pre-commit` passes.
Co-Authored-By: heihutu <heihutu@gmail.com>
* docs(obs): document dial9 as an on-demand profiler
scripts/run.sh advertised a `SAMPLING_RATE` knob that was never passed to dial9,
and claimed "CPU overhead < 5% (with sampling rate 1.0)" and "lower values reduce
CPU overhead" on the strength of it. The knob is gone; the guidance built on it
had to go too.
Replace it with what is actually true: dial9 needs a `make build-profiling`
binary, its disk budget evicts oldest-first (so a high poll rate can overwrite
the incident you are chasing), and it cannot be toggled without a restart.
Add docs/operations/dial9-runtime-profiling.md covering the build variants, an
investigation walkthrough, the configuration table, how to read the three
supported/configured/active_sessions gauges against each other, and the upstream
gap that makes writer death only indirectly observable.
Co-Authored-By: heihutu <heihutu@gmail.com>
* test(obs): add a dial9 smoke example that proves events are recorded
The bug this guards against is invisible to every existing signal: with
`build` instead of `build_and_start`, dial9 creates the trace file, seals
segments, and reports `TelemetryGuard::is_enabled() == true` — it simply
records no events. Only the segment's byte count tells the two apart.
Measured on this workload: 5640 bytes when recording, 310 bytes (a bare
segment header) when not. The example asserts >= 2048 bytes, and was verified
to fail with the `build` call restored.
Also correct the comment on the `is_enabled` check in `finish_traced_runtime`.
It claimed to catch "recording silently off"; it does not. It only rejects the
inert guard a lenient config yields after a build failure. Recording is
guaranteed by `build_and_start`, not by that check.
Co-Authored-By: heihutu <heihutu@gmail.com>
* test(rustfs): accept Unsupported runtime telemetry capability
A binary built without the `dial9` feature now reports the runtime-telemetry
capability as `Unsupported` rather than `Disabled`. The distinction matters to
operators: `Disabled` implies the capability can be switched on by setting an
environment variable, which is not true here — telemetry needs a rebuild.
Widen the assertion and pin the new semantics: when `dial9::is_supported()` is
false, the state must be exactly `Unsupported`.
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(obs): drop the dial9-s3 feature, its TLS stack is vulnerable
CI's Dependency Review and `cargo deny` both reject the branch: dial9's
`worker-s3` feature depends on aws-sdk-s3-transfer-manager 0.1.3, which pins
aws-smithy-http-client onto hyper-rustls 0.24 and rustls-webpki 0.101.7. That
webpki carries RUSTSEC-2026-0098, -0099 and -0104.
0.1.3 is the latest release of the transfer manager, and 1.2.0 the latest of the
smithy client, so there is nothing to upgrade to. Cargo's feature unification can
add features but cannot drop a transitive dependency, so it cannot be worked
around from here either — the rest of the workspace already resolves to the safe
rustls-webpki 0.103 / hyper-rustls 0.27.
Remove the `dial9-s3` feature and the `with_s3_uploader` wiring. The two S3
environment variables stay parsed and warned about, now naming the real reason
rather than a missing build feature. Trace segments are collected from the output
directory instead. Tracked as D9-14 in rustfs/backlog#1157.
With this, Cargo.lock is byte-identical to main: the PR no longer touches the
dependency graph at all.
Also correct the `dial9-taskdump` documentation. It claimed the feature "compiles
to a no-op elsewhere"; in fact `tokio/taskdump` raises a `compile_error!` on any
target other than linux/{aarch64,x86,x86_64}. Verified by trying to build it on
macOS, which is how the claim was found to be wrong.
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
versions_scanned for both the scanner and ILM collectors was read from
the Lifecycle work source's `checked` counter, which is never recorded on
the production scan path — so rustfs_scanner_versions_scanned_total and
rustfs_ilm_versions_scanned_total sat at zero even while objects_scanned
climbed. The two metrics also have distinct intended meanings that were
conflated: "versions scanned" (all versions, any bucket) vs "versions
checked for ILM actions" (lifecycle-configured buckets only).
Add a lifetime `versions_scanned` counter recorded for every version the
scanner walks (independent of ILM), and record the Lifecycle source's
`checked` counter from the ILM evaluator so the ILM metric reflects the
real checked subset. The scanner collector now reports total scanned
versions; the ILM collector keeps the ILM-checked subset.
Closes backlog#995 (OBS-09).
Co-authored-by: heihutu <heihutu@gmail.com>
* fix(obs): isolate process sampler windows
Refs rustfs/backlog#1004
Refs rustfs/backlog#986
- add a reusable ProcessSampler so callers can own independent sysinfo refresh windows
- wire separate sampler instances for obs metrics scheduling and memory observability
- keep compatibility helpers while avoiding cross-task CPU and disk delta interference
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(obs): import process sampler bundle helper
Refs rustfs/backlog#1004
Refs rustfs/backlog#986
- import collect_process_metric_bundle_with in the metrics scheduler
- drop the stale collect_process_metric_bundle import after switching scheduler sampling to independent process samplers
Co-Authored-By: heihutu <heihutu@gmail.com>
* fix(obs): move process sampler into blocking task
Refs rustfs/backlog#1004
Refs rustfs/backlog#986
- move the memory observability process sampler into the spawn_blocking closure
- satisfy the closure static lifetime required by tokio while keeping the isolated sampler design intact
Co-Authored-By: heihutu <heihutu@gmail.com>
---------
Co-authored-by: heihutu <heihutu@gmail.com>
Refs rustfs/backlog#1006
- aggregate request traffic samples per type to avoid future counter collisions
- keep request schema and collector crate-internal until a production stats source exists
- preserve focused regression coverage for the internal request collector logic
Co-authored-by: heihutu <heihutu@gmail.com>
docs: document obs reverse dependency on ecstore
Add comment explaining why obs depends on ecstore and the scope
of work required to break this dependency.
Refs #735
Co-authored-by: houseme <housemecn@gmail.com>
revert: restore #![allow(dead_code)] - clippy -D warnings treats warn as error
The #742 PR changed #![allow(dead_code)] to #![warn(dead_code)], but
CI runs clippy with -D warnings which turns warnings into errors.
This caused CI failures across multiple PRs.
Reverting to #![allow(dead_code)] until the dead code is actually
cleaned up. The 189 warnings in ecstore should be fixed incrementally
by deleting dead code and adding item-level allows, not by changing
the crate-level policy.
houseme