Commit Graph

18 Commits

Author SHA1 Message Date
Sebastian Poxhofer 716baf630b fix(linters): add rules for filesystem helpers and Date (#44685)
* feat(lint): add renovate/prefer-fs-util and renovate/prefer-luxon rules

Two shared-util substitution rules, both at warn level:

- renovate/prefer-fs-util flags value imports of fs, node:fs,
  fs/promises, node:fs/promises, fs-extra and fs-extra/esm in lib/
  source files outside lib/util/fs/, pointing to the scoped helpers
  from lib/util/fs. Spec files and type-only imports are exempt.
  A config-only change via no-restricted-imports was considered but
  rejected: that rule is at error severity globally and per-path warn
  severity is not expressible, so the 13 existing call sites would
  break the baseline.

- renovate/prefer-luxon flags new Date(...) and Date.now() in lib/
  source files, pointing to Luxon per best-practices. Date/time
  utility modules (lib/util/date, lib/util/pretty-time,
  lib/util/timestamp) and spec files (vi.setSystemTime etc.) are
  exempt.

Baseline: 13 prefer-fs-util and 45 prefer-luxon warnings, zero errors.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* refactor: use Luxon instead of new Date() at remaining call sites

Fixes all renovate/prefer-luxon violations for `new Date(...)`:

- `new Date().toISOString()` -> `DateTime.utc().toISO()` (byte-identical
  output) in the http cache provider, schedule logging and PR cache.
- `new Date()` -> `DateTime.now().toJSDate()` for the git commit-date
  fallback and the rubygems `syncedAt` markers (same `Date` values).
- rust-release-channel now computes the Rust 1.0 release date and nightly
  version dates via `DateTime.utc(...)`; previously `new Date(y, m, d)`
  used the local timezone while the epoch used UTC, so the comparison was
  timezone-dependent at the boundary date. Tests run with TZ=UTC, where
  behavior is unchanged.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* refactor: use lib/util/fs helpers in repository worker

Fixes renovate/prefer-fs-util violations outside bootstrap code:

- `fs.ensureDir()` -> `ensureDir()` from lib/util/fs (same fs-extra call
  underneath; it no-ops on an empty dir name, so the repository worker
  spec now simulates the init failure via a rejected `initRepo` instead
  of relying on `fs.ensureDir('')` throwing).
- `fs.remove(privateCacheDir())` -> `cachePathExists()` + `rmCache()`,
  keeping the remove-if-present semantics while asserting cacheDir
  containment.

Two call sites keep raw imports with reasoned disable comments:

- lib/util/modules.ts synchronously enumerates Renovate's own installed
  module directories at import time.
- lib/util/cache/package/impl/sqlite.ts receives cacheDir as an explicit
  argument during global initialization, before GlobalConfig (which the
  scoped cache helpers resolve against) contains cacheDir.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* feat(lint): promote prefer-fs-util and prefer-luxon to error

Both rules are narrowed to what is actually accepted practice before
being promoted:

prefer-luxon no longer flags `Date.now()`: it returns UTC-based epoch
milliseconds used for elapsed-time measurement and TTL arithmetic, which
is timezone-independent by construction. The mined reviewer feedback
behind this rule ("use Luxon for date arithmetic outside util") targets
timezone-dependent date construction/formatting, which cannot occur with
a raw millis number; the rule keeps flagging `new Date(...)`.

prefer-fs-util exempts code that legitimately needs raw fs access
because the scoped lib/util/fs helpers resolve against GlobalConfig
localDir/cacheDir, which does not exist yet or does not apply there:

- lib/logger/: log-file streams at user-configured system paths during
  bootstrap; lib/util/fs also depends on the logger (import cycle).
- lib/workers/global/: creates baseDir/cacheDir themselves and
  reads/writes user-supplied paths before GlobalConfig is seeded.
- lib/config-validator.ts: standalone CLI without GlobalConfig.
- lib/util/git/: owns the localDir lifecycle (clone, emptyDir, symlinks)
  and private-key files with sync cleanup on process exit.

Also fixes a pre-existing tsc error in prefer-fs-util.js: `importKind`
is a TypeScript-ESTree extension missing from eslint's base AST types.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* refactor(fs): make rmCache ignore missing paths

All rmCache callers use it for cleanup, where a missing path is a
no-op, so bake force: true in instead of guarding call sites with
an existence check.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* refactor(linters): exempt lib/instrumentation from prefer-fs-util

`lib/instrumentation/file-exporter.ts` landed on main while this branch
was open and imports `node:fs/promises` directly.

The exporter writes to a user-configured system path
(`RENOVATE_TRACING_FILE_EXPORTER_PATH`) outside `localDir`/`cacheDir`,
so the scoped helpers do not apply. `lib/instrumentation` is also
deliberately kept out of the module graph of instrumented libraries
(see the `⚠️` note in `lib/renovate.ts`), so it must not pull in
`lib/util/fs` and its config/logger dependencies. Exempt the directory,
as is already done for `lib/logger`.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* docs: shorten doc

---------

Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
2026-07-25 16:00:44 +00:00
Sergei Zharinov 930cf6633c refactor: Rewrite imports with .ts extensions (#40700)
fix: Additional vi.mock path corrections and prettier formatting
2026-01-26 22:48:17 +00:00
Michael Kriese 997c23502e test: migrate to vitest (#34475)
Co-authored-by: HonkingGoose <34918129+HonkingGoose@users.noreply.github.com>
2025-02-26 09:35:54 +00:00
Sergei Zharinov b69416ce17 refactor(prettier): Force trailing commas (#25631) 2023-11-07 15:50:29 +00:00
Jamie Magee 176282e65f chore: use node: protocol imports (#21181) 2023-03-28 21:05:36 +00:00
Rhys Arkins b6ed33ec01 fix(regex): don’t escape forward slash in fileMatch (#19314)
This cleanup of default `fileMatch` values should be backwards compatible.
2023-03-10 09:34:39 +01:00
Michael Kriese 0838ca209c refactor: strict datasource tests (#16150) 2022-06-20 13:15:02 +02:00
Michael Kriese 53bd90b30f refactor(platform): final strict checks (#15268) 2022-04-22 22:05:26 +02:00
Rhys Arkins dca3418bbd refactor: lib/modules (#14488)
Moves datasource, manager, platform and versioning code from lib/ into new lib/modules/

BREAKING CHANGE: External tools must update paths to datasource, manager, platform and versioning
2022-03-04 09:04:02 +01:00
Michael Kriese 2b24a98359 refactor: update imports for esm (#13230)
Co-authored-by: Rhys Arkins <rhys@arkins.net>
2021-12-22 08:37:47 +00:00
RahulGautamSingh ee2e155f1f fix: modify regex to be re2 compatbile (#12778)
Co-authored-by: Rhys Arkins <rhys@arkins.net>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
2021-11-29 19:16:05 +00:00
RahulGautamSingh 91f067b39f fix: refactor regex to use re2 part3 (#12283)
Co-authored-by: Rhys Arkins <rhys@arkins.net>
2021-10-27 14:37:11 +00:00
renovate[bot] 4f59b62da4 chore(deps): update dependency prettier to v2 (#5952)
* chore(deps): update dependency prettier to v2

* Run prettier-fix

Co-authored-by: Renovate Bot <bot@renovateapp.com>
Co-authored-by: Jamie Magee <jamie.magee@gmail.com>
2020-04-12 18:09:36 +02:00
Michael Kriese 30fcff2194 feat(internal): dynamic platform imports (#5898) 2020-04-08 09:14:32 +02:00
Jamie Magee 5ce5ef39c1 chore(internal): disallow implicit braces (#5730) 2020-03-17 12:15:22 +01:00
Rhys Arkins 6293edc19a feat: replace datasource constants with IDs (#5595)
Co-Authored-By: Michael Kriese <michael.kriese@visualon.de>
2020-03-01 08:01:12 +01:00
Rhys Arkins e13cb52ed5 feat: validate managers 2020-02-16 06:49:09 +01:00
Sergio Zharinov 23e254eee9 refactor: Extract module loading code out to utils (#5444) 2020-02-16 05:57:12 +01:00