* docs: fix images rendered as code inside figure blocks
The docs build forces tab_length 2, so content indented by two spaces
inside a <figure markdown> block is parsed as an indented code block.
Six images were printed as literal markdown instead of being rendered.
De-indent the six figure blocks and add a test that fails if indented
content reappears inside one.
* chore: add markdownlint rule for indented figure content
Replace the vitest check with a markdownlint custom rule. It runs with
pnpm markdown-lint, reports file and line like any other markdown
violation, and uses the micromark tokens so a <figure markdown> block
inside a fenced code sample is not flagged.
* Revert "chore: add markdownlint rule for indented figure content"
This reverts commit b853804501.
* chore: remove test
* fix(gerrit): resolve relative submodule URLs for nested project paths
* Fix tests after rebase
---------
Co-authored-by: Felipe Santos <felipe.santos@ericsson.com>
* refactor(lint): enable oxlint prefer-named-capture-group at error
Numbered capture groups (m[1], $1) break silently when a regex is
edited and group order shifts. Named groups (?<name>...) make intent
explicit and accesses (m.groups.name) resilient to reordering.
This enables the built-in eslint rule prefer-named-capture-group,
surfacing 321 pre-existing unnamed-group violations across ~121
files to be burned down incrementally in follow-up commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(versioning): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations in
lib/modules/versioning/. Unused capture groups (only reachable via
.test() or whole-match) become non-capturing (?:...); groups whose
value is read become named (?<name>...), with accesses rewritten to
match.groups!.<name> (or destructured from .groups!) instead of
positional match[n]/$n so a future edit that reorders groups cannot
silently break the reader.
Two cases needed extra care to preserve behavior:
- semver/common.ts and poetry/patterns.ts split() on a regex whose
capture group is relied upon by String.prototype.split to keep the
separator in the output array; the group is kept capturing and
named, not converted to non-capturing.
- hashicorp/convertor.ts's semverRegex is only ever embedded via
.source into a named `(?<version>...)` group elsewhere and never
matched directly, so its internal groups are safe to make
non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(datasource): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/datasource/. Same treatment as the versioning module:
unused groups become non-capturing, used groups get names, and
positional match[n] reads move to match.groups!.<name>.
docker/ecr.ts and pypi/common.ts keep their positional destructuring
(`const [, region] = ...`, `!!m &&`) working unchanged since a named
capture group is still addressable by its numeric index in
JavaScript — only pypi/common.ts's access was rewritten to
m.groups!.owner for clarity since it read a single group directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(platform): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/platform/. Uses the repo's established idiom of
`match.groups?.<name>` after an optional-chained exec()/match() (see
bitbucket/index.ts hostnameWithoutApiPrefix, gerrit/utils.ts
extractSourceBranch) and `$<name>` in String.replace replacement
strings. Unused groups (markdown/HTML massaging regexes matched only
to be stripped) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups in ansible-galaxy for prefer-named-capture-group
Burns down prefer-named-capture-group violations in
lib/modules/manager/ansible-galaxy/. newBlockRegEx and blockLineRegEx
dropped their unused outer wrapping group (only the inner key/value
groups were ever read) and named the key/value groups; nameMatchRegex's
remaining unused groups (protocol/user-info/port alternatives) become
non-capturing since only source/hostname/depName/version are read via
.groups. Accesses in collections.ts and roles.ts move from
lineMatch[2]/lineMatch[3] to lineMatch.groups!.key/value.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 1)
Burns down prefer-named-capture-group violations across the first
alphabetical slice of lib/modules/manager/ (ansible through mix).
Used groups get names with accesses rewritten to match.groups!.<name>
(or $<name> in replacement strings); groups whose value is never read
become non-capturing (?:...). Two String.split() call sites
(git-submodules/extract.ts, meteor/extract.ts) keep the established
"named group still readable positionally from the split() result
array" idiom instead of restructuring the destructuring.
bazel/rules/go.ts and buildpacks/extract.ts dockerRef verified
byte-for-byte equivalent before/after via a quick node script since
several nested groups collapsed to non-capturing at once.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 2)
Burns down prefer-named-capture-group violations across the remaining
alphabetical slice of lib/modules/manager/ (npm through terragrunt).
Same treatment as batch 1: used groups get names with accesses moved
to match.groups!.<name> or $<name> replacement strings; unused groups
(wrapping alternations, quantifier repetition groups only consumed via
.test(), or values never read from a match) become non-capturing.
terraform/extractors/others/modules.ts and terragrunt/modules.ts share
near-identical URL-parsing regexes (github/bitbucket/git/azure-devops
ref matchers) — the same set of always-unused `depth=`/`&depth=`
query-string groups is converted to non-capturing in both files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(config): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/config/.
Used groups get names with replacement strings switched from $1/$2 to
$<name>; the unused separator group in schedule-migration.ts's
afterBeforeRegex becomes non-capturing. presets/parse.ts keeps
assigning through the already-declared `repo` variable rather than
array-destructuring the exec() result, matching this file's existing
style for the other named-group regexes just above it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(util): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations across lib/util/ and
lib/logger/. Same treatment as previous batches: named groups for
values that are read (via $<name> replacement strings, .groups!.<name>,
or destructured from .groups), non-capturing groups where nothing reads
the captured value (e.g. semantic.ts's angular-commit .test()-only
regex). www-authenticate.ts's tokenizer entries each get their own
named group but keep accessing the match generically via match[1],
since a positionally-indexed named group is still readable by index.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(workers): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/workers/.
Used groups get names with $<name> replacement strings; unused
wrapper/alternation groups (e.g. semantic-commit-message.ts's optional
scope/issue wrappers, release-notes.ts's date-heading and
horizontal-rule matchers that are only probed with .search()/replaced
wholesale) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(test,tools): name capture groups for prefer-named-capture-group
Finishes the prefer-named-capture-group burndown: test/, tools/, and
vitest.config.mts. Groups whose value is read get names ($<name>
replacement strings or .groups.<name> access); groups only used via
.test()/.search() or that feed a .match(/…/g) call (whose return value
is the array of whole matches, not captured groups) become
non-capturing.
This is the last remaining slice of pre-existing violations, so the
rule (already enabled at error repo-wide) now passes with zero
findings across the whole codebase.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* fix prettier failure
* refactor(lint): use a named capture group in `v8-ignore-no-count`
New rule from main trips the newly enabled `prefer-named-capture-group` oxlint rule.
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
We dropped the "bot" from our terminology long ago, but it looks like
we've got some outdated docs + code that reference it.
We should remove this to keep things consistent.
A `fix`, as we're changing the commit author's name, and log lines.
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Refs #45216
The object counterpart to `prefer-coerce-array`: `x ?? {}` becomes
`coerceObject(x)`. The rule flags a `??` whose default is a bare `{}`
literal, so a populated default or an asserted `({} as Foo)` still
passes; a `x ?? y ?? {}` chain maps onto `coerceObject(x, y)`.
Every hit across `lib/` converted cleanly, so no disable comments were
needed.
* refactor(linters): add prefer-coerce-array rule
Refs #45217
`x ?? []` and `coerceArray(x)` say the same thing, but only the second
one is searchable and consistent. The rule flags a `??` whose default is
a bare `[]` literal; a non-empty default or an asserted `([] as Foo[])`
still passes.
Applying it across `lib/` surfaced three spots the helper cannot cover,
which keep `?? []` with a disable comment or a narrower fix:
- `package-files.ts` destructures a tuple, which `coerceArray()` widens
- `generate.spec.ts` defaults `matchAll()`, an iterator rather than an array
- `mise/upgradeable-tooling.ts` declares a `Record` return, so its
`?? []` fallback was wrong to begin with and becomes `coerceObject()`
* refactor(platform/github): hoist the GHE version header lookup
`Object.entries(...).find()` returns a tuple, and defaulting it with
`?? []` only to destructure the second element reads as an array
default when it is not one. Name the found entry instead, which drops
the `?? []` rather than routing a tuple through `coerceArray()`.
* fix(lint): use `parseInt` over `Number`
As a code review comment that comes up every so often, we can add a
linting rule to enforce this check.
This also fixes any existing usages.
As this could be breaking, we can release it as a `fix`.
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
* fixup! fix(lint): use `parseInt` over `Number`
* fixup! fix(lint): use `parseInt` over `Number`
---------
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
* ci(linter): add renovate/require-regex-util rule
Adds a custom oxlint rule that flags raw RegExp usage in lib/
production code: any `new RegExp(...)` call and any regex literal
that is not the direct first argument of `regEx(...)`. The regEx()
helper from lib/util/regex.ts uses the RE2 engine for ReDoS-safe
matching and caches compiled patterns. lib/util/regex.ts itself is
exempt.
The rule is disabled for **/*.spec.ts, test/**, and tools/** via
config overrides, because vitest APIs such as expect.stringMatching
need bare RegExp instances (a past commit reverted regEx() there).
Severity is set to "warn" instead of "error": the repo currently has
197 pre-existing violations (above the agreed mechanical-fix
threshold of 80), and a number of them are deliberately
RE2-incompatible patterns (lookahead/lookbehind/named backreferences,
see TODO #12872/#12875 markers in e.g. lib/modules/versioning/rez/
pattern.ts and lib/modules/manager/dockerfile/extract.ts) that need
per-site judgment before they can be wrapped in regEx() or suppressed
with a justified disable comment. No violation fixes are included in
this commit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): enforce renovate/require-regex-util at error
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: use regEx() for regex literals and RegExp construction in lib
Burn down all renovate/require-regex-util violations (197):
- wrap RE2-compatible regex literals and RegExp constructions in regEx()
- rewrite lookaround patterns where behavior is provably preserved:
goproxy separator split, sbt-package link extraction, leiningen
comment stripping and keyword search, npm GitHub owner validation
(unit-count bound replaced by an explicit length check)
- keep native RegExp with disable comments where RE2 cannot be used:
moo / good-enough-parser lexer patterns (moo rejects RE2 instances),
MigrationsService propertyName (matched via isRegExp, which RE2
instances fail), rez named backreferences and lookaheads, GitHub
markdown link negative lookbehind, emoji astral-plane matching
- drop stale TODO #12875 comments for patterns current re2 handles
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: reduce require-regex-util disable comments
Rewrite the github massage-markdown-links URL regex to capture an
optional `api.` prefix in a named group (skipped in code) instead of
relying on a negative lookbehind, so both the base and global variants
can use regEx()/RE2 and their two disable comments are removed. Add
spec cases for api-prefixed URLs that match the URL shape.
Consolidate the four related line disables in rez/pattern.ts (bound and
range patterns emulating Python conditional patterns via named
backreferences and lookaheads, which RE2 cannot express) into a single
block disable/enable pair, matching the treatment of the lexer files.
Disable comment count drops from 13 to 8.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor(datasource/sbt-package): use named capture group in link regex
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor(manager/cake): restore original multiLineComment regex spelling
The [^] -> [\\s\\S] rewrite was only needed for an RE2 wrap that was
later reverted; keep the diff minimal.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(datasource/go): skip empty GOPROXY segments
The switch from a lookahead split to a capture-group split (needed because
RE2 has no lookahead support) changed how empty GOPROXY segments parse:
`a|,b` yielded `{ url: ',', fallback: '|' }` before and
`{ url: '', fallback: ',' }` after. The comma fallback only continues on
404/410, so a failing proxy ahead of an empty segment silently stopped the
lookup instead of falling through to the remaining proxies.
Empty segments carry no url to query, so drop them.
* refactor(datasource/go): use isTruthy for empty segment filter
* fix(datasource/go): filter empty segments before mapping
Filtering after the map broke the contextual typing from the
GoproxyItem[] annotation, widening fallback to string.
* refactor(platform/github): use regEx() for merge queue query stripping
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix(gerrit): use max available Code-Review vote value for autoApprove
* Update lib/modules/platform/gerrit/scm.ts
Co-authored-by: Felipe Santos <felipecassiors@gmail.com>
* refactor(gerrit): extract Code-Review label name into a constant
* fix(gerrit): skip Code-Review vote and warn if label is not defined on project
* test(gerrit): restore Code-Review+2 auto-approve test with a defined label
* docs(gerrit): shorten getAutoApproveLabelValue() comment
* fix(gerrit): use static log message with metadata object for logger.warn
* refactor(gerrit): extract GerritLabels type alias
---------
Co-authored-by: Felipe Santos <felipecassiors@gmail.com>
* feat(config): add commitTrailers option
Renovate's only way to add git trailers today is `commitBody`, but it's
broken on Gerrit: Renovate appends its own `Renovate-Branch`/`Change-Id`
block after the body, so user trailers end up in a non-final message
block and are not real trailers per git-interpret-trailers rules.
This adds a `commitTrailers: string[]` option (each entry a full
`Key: value` line), standardizes Gerrit's own trailers through the same
mechanism so user trailers and platform trailers merge into one final
block, and verifies the result at runtime with `git interpret-trailers`
(commitlint's trailer-exists rule uses the same approach). The
`:gitSignOff` preset is migrated from `commitBody` to `commitTrailers`
so sign-off works correctly on Gerrit too.
* Simplify a bit
* Simplify docs even more
* Simplify another bit
* Add comment about rawExec
* Drop runtime commit trailer verification
Bypass simple-git only to emit a proactive warn log is not worth the
extra surface area. Config validation already enforces Key: value form.
* test(git): cover string commit message with trailers
Codecov patch failed on the partial ternary branch that normalizes a
string message before appending trailers.
* test(gerrit): fix trailers test after scm rework
Align the commitTrailers merge test with the post-rework Gerrit SCM:
use fakeSha helpers and drop the removed force flag.
* Improve wording on gitSignOff docs
* Validate compiled commitTrailers as well
* Improve trailers example
* Use isString instead
* Update lib/util/git/index.ts
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
* Update lib/workers/repository/onboarding/branch/create.ts
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
* Format code
* Fix type-check
* Fix tests
---------
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
* ci(linter): add renovate/v8-ignore-reason rule
Flag coverage-ignore comments ("v8 ignore") that carry no justification.
Accepted forms: "-- reason" / "--- reason" (recommended) and the legacy
colon form "v8 ignore <kind>[ <count>]: reason", which is already
widespread in the codebase (29 sites). Bare "v8 ignore stop" markers are
exempt because the justification lives on the paired "start" marker. The
"v8 ignore next <N>" count form remains allowed; this rule only requires
a justification.
Registered as "warn" instead of "error": the repo currently has 119
reason-less v8 ignore comments, too many to fix mechanically in one PR,
so existing sites are left untouched and can be fixed incrementally.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): promote renovate/v8-ignore-reason to error
Record the empirical verdict on the contested "v8 ignore next <N>" count
semantics in the rule doc: verified against vitest 4 with
ast-v8-to-istanbul that the count is not honored - the ignore hint always
exempts exactly the next AST node regardless of N. Counts are therefore
inert and stay allowed; the rule keeps requiring only a justification.
Promoting to error so all remaining reason-less coverage-ignore comments
must be fixed; the burndown follows in subsequent commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 1)
Give every reason-less "v8 ignore" comment outside the large platform
index files a site-specific justification explaining why the exempted
branch is untestable or defensive, as now required by the
renovate/v8-ignore-reason rule.
Also guard against a nullish comment.loc in the rule itself; the
merged-in stricter tools typechecking flagged the unguarded access.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 2)
Cover the five large platform index files (github, bitbucket,
bitbucket-server, codecommit, gitlab) with site-specific reasons on
every "v8 ignore" comment, completing the renovate/v8-ignore-reason
burndown. Two meaningless ignore hints inside commented-out CodeCommit
mergePr code are dropped instead of annotated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* Apply suggestions from code review
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
* Update lib/util/regex.ts
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
* ci(linter): add renovate/no-host-rules-mock rule
Flags vi.mock()/vi.doMock() calls whose module specifier contains
"host-rules" in spec files. Tests should configure real rules via
hostRules.add() instead of mocking the host-rules module.
Enabled at "warn" severity instead of "error": the repo currently has
35 pre-existing violations across 34 spec files, which exceeds the
agreed fix threshold of 12 files. No violation fixes are included;
migrating each spec to real hostRules.add()/clear() setup is a
semantic test rewrite that should be done incrementally, after which
the rule can be promoted to "error".
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): enforce renovate/no-host-rules-mock at error
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* test(datasource): use real host-rules instead of mocking
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* test(manager): use real host-rules instead of mocking
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* test(platform): use real host-rules instead of mocking
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* test(util,workers): use real host-rules instead of mocking
Also narrow renovate/no-host-rules-mock to the host-rules module itself so that mocking e.g. host-rules-from-env is not flagged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): mention '~test/host-rules.ts' util in no-host-rules-mock message
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix(gerrit): remove memCache to fix prNo coming as null when pr-created
* perf(gerrit): remove custom scm functions
* Fully remove login parameter from configureScm()
* Fetch refspecs in batches
* Remove unnecessary error handling
* Add tests
* Throw if branch init fails
* Simplify tests a little
* Reduce more the tests
* More test changes
* Reuse the existing test setup more
* Undo test import change
* Improve initializeBranchesFromRefspecs JSDoc
* The same for deleteBranchCreatedFromRefspec
* Reduce a log to trace level
* Abandon Code-Review -2 changes before initializing repository
* Simply initialize the branches after git.initRepo()
* Rework approach to be more generic
* Add TODO comment about commitAndPush()
* fix(gerrit): defer change creation to `createPr()`
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
* Refactor hashtags handling
* Add prTitle to all missing commitAndPush()
* Fix type check
* Fix test issue
* Fix gerrit tests
* Add warning when prTitle is set in updatePr
* Remove now useless labels from commitAndPush
* Fix gerrit client coverage
* Fix gerrit scm coverage
* Fix rebase coverage
* Improve TODO about assignees
* Fix formatting
* Fix review comment
* Extract to a pushForReview function
* Fix after #41382
* Fix onboarding
* Cleanup code
* Fix ESLint
* Fix tests
* Restore gitRetry for git.merge
* Fix tests
* Simplify hashtags code
* Delete pendingChangeBranch in pushForReview()
* Fix test name
* Remove unnecessary test comments
* Improve test name again
* Fix another test name
* Delete local branch in Gerrit SCM
* Add test for deleting pending branch
* Add tests for pushForReview()
* Simplify/optimize commitAndPush
* Align jsdoc terminology on virtual branches
* Remove no longer relevant TODO
* Update virtal branch on push
* Simplify deleteVirtualBranch
* Fix test case name
* Improve another test name
* Restore test deleted by mistake
* Fix another small test inconsistency
* Fix coverage
* Fix Renovate not detecting modified commits
* Simplify Gerrit commitAndPush by leveraging git.commitFiles
* Fix some code style issues
* Revert "Simplify Gerrit commitAndPush by leveraging git.commitFiles"
This reverts commit d71edcc279.
* Fix another small code style issue
* Use isUndefined instead
* Fix one small test style issue
* Fix more code style issues
* Fix Gerrit mergeToLocal trying to fetch (and probably failing)
* Extract refs/remotes/origin to a function
* Rename virtualBranchRef to remoteBranchRef
* Fix remoteBranchRef tsc
* Consistently use currentRevision in Gerrit tests
* Remove unnecessary type assertion
* Instrument "fetch virtual branches"
* Remove pendingChangeBranches, avoid overriding deleteBranch and mergeToLocal
* Optimize virtual branches fetch (no longer requires update-ref), convert virtualBranches to Record, rename setVirtualBranch to registerVirtualBranch
* Combine registerVirtualBranch and updateVirtualBranch into a single setVirtualBranch, and update ref in virtual branch too
* Fix virtualBranches not being initialized
* Add some debug logs
* Simplify mergeToLocal for virtual branches
* Revert "Simplify mergeToLocal for virtual branches"
This reverts commit 375d57a474.
* Remove useless isVirtual const
* test(git): add toThrow message for virtualBranches fetch error
Satisfy vitest/require-to-throw-message so oxlint passes.
* Update lib/util/git/types.ts
Co-authored-by: RahulGautamSingh <rahultesnik@gmail.com>
* Address review feedback
---------
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
Co-authored-by: RahulGautamSingh <rahultesnik@gmail.com>
Enable no-else-return (with allowElseIf: false) and unicorn/no-lonely-if
as errors in .oxlintrc.json and fix all 131 pre-existing violations
(91 no-else-return, 40 unicorn/no-lonely-if) across 98 files.
The no-else-return violations were fixed with the oxlint autofix
(iterated to a fixpoint, plus two else-if chains that required
--fix-dangerously) followed by Prettier formatting. One comment dropped
by the autofix in lib/modules/manager/pub/artifacts.ts was restored
manually. The unicorn/no-lonely-if violations were merged by hand,
preserving comments and coverage-ignore hints.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* feat(git): validate length commit shas
* test: adapt test mocks
* chore: update import paths
* feat(git): make the validation more strict and support repositories using sha256
* test: add fakeSha function for deterministic git commit shas in tests
* fix(platform/gerrit): replace getJsonUnchecked with validated getJson
Migrate all getJsonUnchecked calls in lib/modules/platform/gerrit/client.ts
to use Zod-validated getJson. Co-locate schemas in schema.ts with lenient
optional fields to ensure backward compatibility with all existing API responses.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* strictly follow previous interfaces
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: migrate from zod/v3 to zod/v4
This commit contains the logic changes
* chore: migrate imports from zod/v3 to zod/v4
This contains import updates and adds explicit record keys as zod/v4 requires these now
* ci: enforce usage of zod/v4
* ci: add local mkdocs-admonitions plugin for prettier to allow admonition preservation
* docs: remove uses of `prettier-ignore` for admonitions
* test: rather use await expect
* chore: use named group exclusively
* docs: ensure 2 spaces used for generated admonitions
As a follow-up to 4b0146ab7b and
1844916259b6dc17f532e491eb93f6116327c324., this correctly renders
admonitions with 2 spaces (1 indent).
* fixup! docs: use 2-space indentation for Markdown (#43537)
Plus using 3-space for mixed-style `<ul>` and `<ol>`s.
* fixup! docs: use 2-space indentation for Markdown (#43537)
As otherwise it breaks the rendering of the table.
* fix(gerrit): defer change creation to `createPr()`
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
* Refactor hashtags handling
* Add prTitle to all missing commitAndPush()
* Fix gerrit tests
* Add warning when prTitle is set in updatePr
* Remove now useless labels from commitAndPush
* Fix gerrit client coverage
* Fix gerrit scm coverage
* Fix rebase coverage
* Improve TODO about assignees
* Fix formatting
* Fix review comment
* Extract to a pushForReview function
* Fix after #41382
* Fix onboarding
* Cleanup code
* Fix ESLint
* Fix tests
* Restore gitRetry for git.merge
* Fix tests
* Simplify hashtags code
* Delete pendingChangeBranch in pushForReview()
* Fix test name
* Remove unnecessary test comments
* Improve test name again
* Fix another test name
* Delete local branch in Gerrit SCM
* Add test for deleting pending branch
* Add tests for pushForReview()
* Fix test case name
* Improve another test name
* Fix another small test inconsistency
* Fix some code style issues
* Use isUndefined instead
* Fix one small test style issue
---------
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
* feat: Gerrit supports gitUrl
This change adds support for the gitUrl parameter to the gerrit platform.
It queries the gerrit server to check what download options are available. If ssh is selected but not available, it will throw an error.
* feat: Gerrit supports gitUrl
This removes support for querying the supported download schemes and
instead hard-codes the default ssh port.
* fix: Review feedback
Addresses feedback left in review:
- constants for ports
- better SSH url creation
- more consistent util method usage
* fix: Review feedback
Addresses feedback left in review:
- Reverts SSH URL creation to ensure coverage target
* fix: Review feedback
Addresses feedback left in review:
- Convert switch statement to if/else
- Move endpointURL check into getGerritResponse
This makes the parse/clone calls unnecessary.
* fix: Review feedback
Addresses feedback left in review:
- Simplify ssh url creation
fix(gerrit): use the "ready" push option to ensure changes are not wip
In gerrit, changes can be set to WIP by default instead of ready.
This breaks renovate because it doesn't see WIP changes and just
creates new ones again every run.
The solution is to always include the "ready" push option to ensure
the changes are ready and not wip.
https://gerrit-review.googlesource.com/Documentation/user-upload.html
* refactor(platform): programatically mark Platforms as experimental
As part of future changes, we'll want to be able to more
straightforwardly determine whether a given Platform is experimental.
To do this, we can add a new optional `experimental` flag to the
`Platform`.
As part of having this available, we can refactor how our docs for
Platforms are built, and replace a hand-authored experimental notice, we
can automagically insert it into the built docs.
To make sure that we don't break the rendering of the Markdown for
Mkdocs, we need to insert the experimental notice after the page
heading.
As we're now using the Platform itself, not only the ID, we need to
refactor how `tools/docs/platforms.ts` renders the pages.
* docs(platforms): clarify which Platforms are experimental (#41249)
* chore: format code block
---------
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
We need to explicitly pass the gerrit credentials to the api calls
in initPlaform since the host rules for the platform aren't set up
until later on, so the standard http library won't find any credentials
for the gerrit platform yet.
This follows the same pattern as many of the other platforms on renovate
where they also explicitly pass credentials for the api calls made
during their initPlatform.
This appears to have been broken recently due to the recent addition
of an authenticated version api call in
https://github.com/renovatebot/renovate/pull/39223
See https://github.com/renovatebot/renovate/discussions/39969
* fix(gerrit): use most efficient search operators based on Gerrit version
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
* Address review comments
* Use ignore if instead
* Rename client.version to client.gerritVersion
* Update lib/modules/platform/gerrit/client.spec.ts
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
---------
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
* feat(gerrit): handle pagination when querying changes
* Add noPagination option, rename pageLimit to limit, and JSDoc them
* Rename limit to pageLimit
* Rename test references
Darren Dooley