Renovate deployments that are deployed across multiple organisations may
take advantage of Inherited Config as a means to decentralise some
decisions and/or preferences that their organisations would like to use
for some self-hosted configuration.
Similarly, the decision of which hosts to allowlist may be something
that a self-hosted administrator /may/ want to allow their organisation
admins to decide.
We can make this an opt-in capability to indicate that the self-hosted
administrator trusts the Inherited Config moreso, and allows someone who
can write to it the ability to allowlist access to internal hosts that
may not be intended.
If a self-hosted administrator sets `allowInternal: false`, this takes
precedence, allowing a "veto", and a self-hosted admin's `headers` are
still preferred, too.
It's not possible for Inherited Config to set grants for `extends`, as
config resolution has already occurred, so this still needs to be
performed at the self-hosted config level.
This trust is transitive: `hostRules` defined in presets the
inherited config `extends` are registered at the same inherited
tier once resolved, so this option must only be enabled when those
preset sources are trusted too.
Co-authored-by: Claude Fable 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
Indirectly related to our changes to Host Rules, it was noticed that we
previously did not provide as helpful an error when a config validation
error occurs with Inherited Config.
Instead of throwing a `CONFIG_VALIDATION`, without a `validationSource`,
`validationError` or `validationMessage`, we can instead throw it
accordingly.
Co-authored-by: Claude Fable 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
With the new hardening on blocking internal hosts with outbound HTTP
calls, we should build on top of this to ensure that the UX is better
when a preset is blocked.
We can do this by making sure that when `HOST_BLOCKED`, we report a more
targeted config validation error.
We can also make sure to pass around our `internalGrants`, similar to
how we currently allow an admin's `headers` are handled.
Co-authored-by: Claude Fable 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As part of follow-up changes, we're looking to tighten the way that
Renovate handles outgoing HTTP traffic.
Before we do this, we can introduce a new config option,
`hostRules[].allowInternal`, that allows a self-hosted administrator to
mark an internal host as "trusted" for access.
This wires in the new global-only config option, `allowInternal`, which
implies a new internal field `internalHostGrant`.
We'll add full documentation in a future commit, when the full
enforcement is in place, as there are some wider changes to enforce it
fully.
Co-authored-by: Claude Fable 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As part of changes we've recently made to the merging of
`hostRules[].headers`, it highlighted that a repository - or a preset
it extends - could lead to a header an admin has configured for one host
to be sent to another.
This happened due to the way we additively merged i.e.
`Object.assign({}, ...matchedHeaders)`.
This doesn't require the repository to know a credential is being
set (for a specific host), or to act maliciously - any header of their
own for that host is enough to bring the administrator's masked one
back, with nothing logged or failing to show it happened.
To fix this, we can:
- apply admin headers last, as they are "trusted"
- stop repositories from being able to unset an admin-set header
- retain the existing logic for the "most specific rule" being used
- make sure that `trusted` isn't a field that could be injected by a
repository, and make sure we explicitly only set it where we know
we're using self-hosted administrator config
- make `filterAllowedHeaders` drop `headers` if every header name was
denied, so `{}` isn't returned and used to suppress headers when
merged
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
We previously enforced `allowedHeaders` by making sure that each
`hostRules.add()` call had `filterAllowedHeaders`.
This isn't super future proofed, and although we could add a linting
rule, we should instead enforce this by making sure that
`hostRules.add()` applies the filtering.
This also catches cases like host rules from `.npmrc` which wasn't
currently being filtered - albeit there was no means to bypass
`allowedHeaders`.
Moving `filterAllowedHeaders` into `lib/util` removes a dependency from
the global bootstrap and `config-validator` importing from
`lib/workers/repository/init/`.
While doing so, we can also make sure that:
- we log only one WARN for global `hostRules` being invalid, rather than
once per `repositories[]`
- `renovate-config-validator` validates a global config file's
`hostRules` against that file's own `allowedHeaders`, like a real run
would after parsing it
Co-authored-by: Claude Fable 5 <jamie.tanna+claude-code@mend.io>
Previously, if there was a `hostRule[].headers` value for a given host
set in both global self-hosted configuration and repo config, the repo
config would overwrite /all/ headers set by the admin.
To resolve this, we can now correctly merge the keys, with the repo
config taking priority.
This still only takes into account the `allowedHeaders`, so a repository
cannot bypass admin settings.
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
For some time, admin configuration for `hostRules[].headers` was
enforced through `allowedHeaders`, but no validation feedback was given
to administrators, as it was silently ignored when `applyHostRule` runs.
To provide visibility to administrators who were setting headers that
were silently being ignored, we can instead provide validation at the
time we set our global host rules.
In a future change, we'll align the behaviour of `allowedHeaders` and
`allowedEnv` to make it so admin-controlled `hostRules` aren't bound by
the `allowedHeaders` flag.
We can also make it clear in the documentation that this is the
behaviour.
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As a further level of defence-in-depth for fixes on top of `allowedEnv`
and `allowedHeaders` enforcement, we can also make sure that we're
performing full config validation for the resolved configuration.
This allows us to report any configuration errors/warnings when we
include the full resolved configuration, without necessarily blocking
the full Renovate run, unless using `configValidationError`.
Co-authored-by: Claude Opus 4.8 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
This change was broken out of another commit, but it is unclear which AI
model was used to make the change, so we need to note both.
Co-authored-by: Claude Opus 4.8 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As an additional defence-in-depth, we can make sure that when applying
the `headers` configuration (from repo config, or presets) we
re-validate it.
We allow any admin-supplied configuration regardless, and then any
user-supplied settings are re-filtered according to `allowedHeaders`.
Due to the existing way that header merging incorrectly merges the repo
(or preset) `headers` over the admin config, we don't currently handle
this explicitly, unlike `filterAllowedEnv`.
If a user-supplied setting is filtered, we log a WARN message to inform
the user - and the admin - that this is ignored.
At this point, we don't try and explain which preset(s) this may have
come from, only that there is an issue.
Co-authored-by: Claude Opus 4.8 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As an additional defence-in-depth, we can make sure that when applying
the `env` configuration (from repo config, or presets) we re-validate
it.
We allow any admin-supplied configuration regardless, and then any
user-supplied settings are re-filtered according to `allowedEnv`.
If a user-supplied setting is filtered, we log a WARN message to inform
the user - and the admin - that this is ignored.
At this point, we don't try and explain which preset(s) this may have
come from, only that there is an issue.
Co-authored-by: Claude Opus 4.8 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As part of follow-up changes, we'll be better enforcing the
`allowedHeaders` validation.
Before we do this, we should make sure that we have relevant test cases
to cover the existing (broken) behaviour.
We should cover this across both Config Validation and how config is merged.
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
As part of follow-up changes, we'll be better enforcing the `allowedEnv`
validation.
Before we do this, we should make sure that we have relevant test cases
to cover the existing (broken) behaviour.
We should cover this across both Config Validation and how config is merged.
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
We dropped the "bot" from our terminology long ago, but it looks like
we've got some outdated docs + code that reference it.
We should remove this to keep things consistent.
A `fix`, as we're changing the commit author's name, and log lines.
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Refs #45216
The object counterpart to `prefer-coerce-array`: `x ?? {}` becomes
`coerceObject(x)`. The rule flags a `??` whose default is a bare `{}`
literal, so a populated default or an asserted `({} as Foo)` still
passes; a `x ?? y ?? {}` chain maps onto `coerceObject(x, y)`.
Every hit across `lib/` converted cleanly, so no disable comments were
needed.
* refactor(linters): add prefer-coerce-array rule
Refs #45217
`x ?? []` and `coerceArray(x)` say the same thing, but only the second
one is searchable and consistent. The rule flags a `??` whose default is
a bare `[]` literal; a non-empty default or an asserted `([] as Foo[])`
still passes.
Applying it across `lib/` surfaced three spots the helper cannot cover,
which keep `?? []` with a disable comment or a narrower fix:
- `package-files.ts` destructures a tuple, which `coerceArray()` widens
- `generate.spec.ts` defaults `matchAll()`, an iterator rather than an array
- `mise/upgradeable-tooling.ts` declares a `Record` return, so its
`?? []` fallback was wrong to begin with and becomes `coerceObject()`
* refactor(platform/github): hoist the GHE version header lookup
`Object.entries(...).find()` returns a tuple, and defaulting it with
`?? []` only to destructure the second element reads as an array
default when it is not one. Name the found entry instead, which drops
the `?? []` rather than routing a tuple through `coerceArray()`.
* test: replace manual process.env mutation with vi.stubEnv
Enable Vitest's `unstubEnvs` so env stubs are reverted automatically
before every test, and convert the manual `process.env.X = ...` /
`delete process.env.X` pairs in specs to `vi.stubEnv()`.
This removes the hand-written `afterEach` cleanup blocks and the
`const OLD_ENV = process.env` / `process.env = { ...OLD_ENV }`
save-restore dance, which silently leaked state between tests when a
test set a variable without a matching delete.
Left as-is (incompatible with `unstubEnvs`, which unstubs before each
test, not after):
- module top-level env writes (cocoapods, gomod, post-update, pip-compile
and bundler artifacts specs)
- `beforeAll` env writes -- the two in `util/http` moved to `beforeEach`
* test: stop asserting on ambient environment variables
Three specs asserted on values that the surrounding environment can
override, so they only passed on a machine that happened not to set them:
- `util/exec/env`: `getChildProcessEnv()` forwards every entry of
`basicEnvVars`, but the spec only seeded a subset. Any other forwarded
variable that was set ambiently (e.g. a lowercase `http_proxy`) leaked
into the `toEqual` assertion. Clear all of them first.
- `util/git/index`: `process.env.GIT_SSH_COMMAND` deliberately overrides
the default that the two env-inheritance tests assert on. Clear it.
- `logger/pretty-stdout`: the colorized level strings are built at import
time, so the `beforeEach` setting `FORCE_COLOR` could never affect them
-- it was dead code, and the test silently assumed a terminal without
colour support. Derive the expectation the same way the module does.
* test(datasource/nuget): use a throwaway cache dir for nupkg downloads
The `determine source URL from nupkg` tests do not mock the filesystem,
so they really wrote downloaded packages into a fixed `/tmp/cache` path.
That fails wherever the system tmpdir is not writable, and two checkouts
running the suite at once would share the same directory.
Use `tmp.dir({ unsafeCleanup: true })` and clean it up afterwards, which
is the pattern the other specs that touch disk already use.
* feat(lint): add renovate/prefer-stub-env rule
Enforces in specs what the migration to `vi.stubEnv` established:
- assigning to or deleting `process.env.X` inside `beforeEach`, `afterEach`,
`it` or `test` is reported, with a fixer that rewrites it to `vi.stubEnv()`
- module scope, `describe` bodies and `beforeAll` / `afterAll` are left alone:
`unstubEnvs` reverts stubs *before* each test, so a stub created there is
gone by the time the first test runs, and those must keep assigning directly
- replacing the `process.env` object is reported everywhere and never fixed.
`vi.stubEnv()` captures the original object when the worker starts, so after
a reassignment its deletes silently target the old object
The rule found 28 further violations in specs the earlier sweep missed, since
that one was anchored on `delete process.env`. Twelve were auto-fixed; the
rest replaced `process.env` wholesale and are now `clearEnv()` from test/util.
`util/exec/index.spec.ts` opts out with a comment: it asserts on the whole
child env, and `vi.stubEnv()` cannot express that because it maps `PROD`,
`DEV` and `SSR` onto '' instead of deleting them.
* feat(lint): add renovate/prefer-fs-util and renovate/prefer-luxon rules
Two shared-util substitution rules, both at warn level:
- renovate/prefer-fs-util flags value imports of fs, node:fs,
fs/promises, node:fs/promises, fs-extra and fs-extra/esm in lib/
source files outside lib/util/fs/, pointing to the scoped helpers
from lib/util/fs. Spec files and type-only imports are exempt.
A config-only change via no-restricted-imports was considered but
rejected: that rule is at error severity globally and per-path warn
severity is not expressible, so the 13 existing call sites would
break the baseline.
- renovate/prefer-luxon flags new Date(...) and Date.now() in lib/
source files, pointing to Luxon per best-practices. Date/time
utility modules (lib/util/date, lib/util/pretty-time,
lib/util/timestamp) and spec files (vi.setSystemTime etc.) are
exempt.
Baseline: 13 prefer-fs-util and 45 prefer-luxon warnings, zero errors.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: use Luxon instead of new Date() at remaining call sites
Fixes all renovate/prefer-luxon violations for `new Date(...)`:
- `new Date().toISOString()` -> `DateTime.utc().toISO()` (byte-identical
output) in the http cache provider, schedule logging and PR cache.
- `new Date()` -> `DateTime.now().toJSDate()` for the git commit-date
fallback and the rubygems `syncedAt` markers (same `Date` values).
- rust-release-channel now computes the Rust 1.0 release date and nightly
version dates via `DateTime.utc(...)`; previously `new Date(y, m, d)`
used the local timezone while the epoch used UTC, so the comparison was
timezone-dependent at the boundary date. Tests run with TZ=UTC, where
behavior is unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: use lib/util/fs helpers in repository worker
Fixes renovate/prefer-fs-util violations outside bootstrap code:
- `fs.ensureDir()` -> `ensureDir()` from lib/util/fs (same fs-extra call
underneath; it no-ops on an empty dir name, so the repository worker
spec now simulates the init failure via a rejected `initRepo` instead
of relying on `fs.ensureDir('')` throwing).
- `fs.remove(privateCacheDir())` -> `cachePathExists()` + `rmCache()`,
keeping the remove-if-present semantics while asserting cacheDir
containment.
Two call sites keep raw imports with reasoned disable comments:
- lib/util/modules.ts synchronously enumerates Renovate's own installed
module directories at import time.
- lib/util/cache/package/impl/sqlite.ts receives cacheDir as an explicit
argument during global initialization, before GlobalConfig (which the
scoped cache helpers resolve against) contains cacheDir.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(lint): promote prefer-fs-util and prefer-luxon to error
Both rules are narrowed to what is actually accepted practice before
being promoted:
prefer-luxon no longer flags `Date.now()`: it returns UTC-based epoch
milliseconds used for elapsed-time measurement and TTL arithmetic, which
is timezone-independent by construction. The mined reviewer feedback
behind this rule ("use Luxon for date arithmetic outside util") targets
timezone-dependent date construction/formatting, which cannot occur with
a raw millis number; the rule keeps flagging `new Date(...)`.
prefer-fs-util exempts code that legitimately needs raw fs access
because the scoped lib/util/fs helpers resolve against GlobalConfig
localDir/cacheDir, which does not exist yet or does not apply there:
- lib/logger/: log-file streams at user-configured system paths during
bootstrap; lib/util/fs also depends on the logger (import cycle).
- lib/workers/global/: creates baseDir/cacheDir themselves and
reads/writes user-supplied paths before GlobalConfig is seeded.
- lib/config-validator.ts: standalone CLI without GlobalConfig.
- lib/util/git/: owns the localDir lifecycle (clone, emptyDir, symlinks)
and private-key files with sync cleanup on process exit.
Also fixes a pre-existing tsc error in prefer-fs-util.js: `importKind`
is a TypeScript-ESTree extension missing from eslint's base AST types.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor(fs): make rmCache ignore missing paths
All rmCache callers use it for cleanup, where a missing path is a
no-op, so bake force: true in instead of guarding call sites with
an existence check.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor(linters): exempt lib/instrumentation from prefer-fs-util
`lib/instrumentation/file-exporter.ts` landed on main while this branch
was open and imports `node:fs/promises` directly.
The exporter writes to a user-configured system path
(`RENOVATE_TRACING_FILE_EXPORTER_PATH`) outside `localDir`/`cacheDir`,
so the scoped helpers do not apply. `lib/instrumentation` is also
deliberately kept out of the module graph of instrumented libraries
(see the `⚠️` note in `lib/renovate.ts`), so it must not pull in
`lib/util/fs` and its config/logger dependencies. Exempt the directory,
as is already done for `lib/logger`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* docs: shorten doc
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix(preset/monorepo): re-add old facebook/react URL
I'd missed this from 61e4c9c2d1, which
leads to old PRs no longer being grouped, which is not correct.
* fixup! fix(preset/monorepo): re-add old facebook/react URL
fix(data): update react and react-native source URLs to react/react org
The react and react-native repositories moved from the facebook org to
the react org on GitHub
See https://github.com/renovatebot/renovate/discussions/44772
* ci(linter): add renovate/v8-ignore-reason rule
Flag coverage-ignore comments ("v8 ignore") that carry no justification.
Accepted forms: "-- reason" / "--- reason" (recommended) and the legacy
colon form "v8 ignore <kind>[ <count>]: reason", which is already
widespread in the codebase (29 sites). Bare "v8 ignore stop" markers are
exempt because the justification lives on the paired "start" marker. The
"v8 ignore next <N>" count form remains allowed; this rule only requires
a justification.
Registered as "warn" instead of "error": the repo currently has 119
reason-less v8 ignore comments, too many to fix mechanically in one PR,
so existing sites are left untouched and can be fixed incrementally.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): promote renovate/v8-ignore-reason to error
Record the empirical verdict on the contested "v8 ignore next <N>" count
semantics in the rule doc: verified against vitest 4 with
ast-v8-to-istanbul that the count is not honored - the ignore hint always
exempts exactly the next AST node regardless of N. Counts are therefore
inert and stay allowed; the rule keeps requiring only a justification.
Promoting to error so all remaining reason-less coverage-ignore comments
must be fixed; the burndown follows in subsequent commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 1)
Give every reason-less "v8 ignore" comment outside the large platform
index files a site-specific justification explaining why the exempted
branch is untestable or defensive, as now required by the
renovate/v8-ignore-reason rule.
Also guard against a nullish comment.loc in the rule itself; the
merged-in stricter tools typechecking flagged the unguarded access.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 2)
Cover the five large platform index files (github, bitbucket,
bitbucket-server, codecommit, gitlab) with site-specific reasons on
every "v8 ignore" comment, completing the renovate/v8-ignore-reason
burndown. Two meaningless ignore hints inside commented-out CodeCommit
mergePr code are dropped instead of annotated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* Apply suggestions from code review
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
* Update lib/util/regex.ts
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
* ci(linter): add renovate/codeblock-in-spec-fixtures rule
Add a custom oxlint rule that requires the codeBlock (or stripIndent)
template helper from common-tags for multi-line string fixtures in spec
files (enabled for **/*.spec.ts and test/** only).
The rule only flags shapes whose value can round-trip through the
common-tags helpers unchanged, since both codeBlock and stripIndent trim
the end result and strip the shortest line indentation:
- only literals spanning multiple source lines are flagged (escaped \n
one-liners are left alone: tagging them is not value-preserving in
general and gains nothing)
- values with leading/trailing whitespace (e.g. fixtures ending in a
newline) are not flagged
- tagged templates, describe/it titles, and inline snapshot arguments
are skipped
All 55 pre-existing violations (22 files) were fixed with a one-off
codemod that re-emits each fixture indented to the statement depth and
verifies value preservation by evaluating codeBlock on the rewritten
template (substitutions kept as opaque placeholders). One site
(pip_requirements/artifacts.spec.ts) mixes line continuations with
escaped newlines and was tagged verbatim instead of re-indented.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): address review findings
Make getSimpleRequirementsFile in pip-compile/extract.spec.ts
value-preserving again: tagging the whole template with codeBlock
trimmed the trailing blank line when deps is empty (the headerOnly.txt
case), silently changing the fixture from ending in '#\n\n' to '#'.
Tag only the static header and append the deps section via a
single-line template, which reproduces the original string exactly
for both empty and non-empty deps (verified by executing old vs new
in node).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Enable no-else-return (with allowElseIf: false) and unicorn/no-lonely-if
as errors in .oxlintrc.json and fix all 131 pre-existing violations
(91 no-else-return, 40 unicorn/no-lonely-if) across 98 files.
The no-else-return violations were fixed with the oxlint autofix
(iterated to a fixpoint, plus two else-if chains that required
--fix-dangerously) followed by Prettier formatting. One comment dropped
by the autofix in lib/modules/manager/pub/artifacts.ts was restored
manually. The unicorn/no-lonely-if violations were merged by hand,
preserving comments and coverage-ignore hints.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): add renovate/prefer-zod-nullish rule
Add a custom oxlint rule that flags zod chains calling .optional() and
.nullable() adjacently (in either order) and suggests .nullish(), which
is equivalent (both accept undefined | null in zod v4).
Fix all 26 pre-existing violations across 6 schema files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): prefer schema-utils Nullish over zod .nullish()
Rename prefer-zod-nullish to prefer-nullish-util and extend it to flag
.nullish() itself, including the standalone forms z.nullish(x) and
z.optional(z.nullable(x)). Migrate all call sites to Nullish() and
DeepNullish() from schema-utils, which normalize null to undefined in
parsed output. Schemas with more than one nullish position are wrapped
in DeepNullish(); nullish object properties with nullish members use
Nullish(DeepNullish(...)) to keep the optional property type marker.
Spec files are exempt (result.spec.ts intentionally tests
null-preserving parses). Spec assertions expecting null in parsed
output were updated to undefined. Note: docker manifests with an
explicit "mediaType": null are now accepted and treated like an absent
mediaType instead of failing the discriminated union.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix: not applying global options in object entries in `repositories` array
* Use isNonEmptyObject
* Add test for per-repo override
* Use AllConfig instead
* fix(config/global): return default values for `GlobalConfig.get`
As noted in #39949, it can be awkward working with in `GlobalConfig.get`, where
we would previously need to specify the default value when calling `.get`,
which could lead to drift with the defaults for a given config option.
To reduce this risk, we can rely on a given `default` for a configuration
option, providing that as a default.
Because this now definitely returns a value that matches the config option, it
now allows us to remove `!` assertions.
* fixup! fix(config/global): return default values for `GlobalConfig.get`
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* fixup! fix(config/global): return default values for `GlobalConfig.get`
* test(presets): remove impossible test
As it's now not possible to set a value as `undefined` (as
`GlobalConfig` will then use the default), this test no longer validates
anything.
* test(workers/repository): add mock
Now `platform` defaults to `github`, we need to mock out the call to
fetch config.
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
* test: coverage
* test: coverage
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
As noted in #15827, it would be useful to log the "shallow"
configuration for a given repository - that is, the resolved
configuration, but without any Renovate internal presets being included.
This will be very useful for debugging, as it shows the final resulting
configuration, but without the - often very - verbose internal presets.
In the case that only this log line is shared, we can make sure to
reference the version of the Renovate CLI in the log line.
This requires building on top of changes in
6a4fa3f245 to be able to return a `merged`
and `unmerged` list of presets, and uses helpers from
c8f42e86b4, and
66b84dd12b to process the internal presets
accordingly.
Since we first worked on this, we've worked on improvements to caching
which should provide a require no additional performance overhead
performing this resolution twice.
This can also lead to being able to understand more clearly how Renovate
configuration is being used[0], as we have the final resolved configuration.
We want to make sure we don't try and merge or visit any internal
presets if we're not going to merge them, so we can avoid verbose
`config` or `visitedPresets` results.
[0]: https://www.jvt.me/posts/2024/04/14/renovate-config-sql/
* feat(vulnerability): Add vulnerability alerts to deps-end + lein
deps-edn and lein both essentially use maven upstream for several
packages. Some packages come from clojars directly but others are
typical java packages. If there is an OSV alert for a maven package
however, it will not propagate to the deps-edn or lein dependency update
from renovate. This tries to adjust that so that clojure can derive
dependency alerts from maven as well so that those dependencies are
treated the same way.
* chore: Code review feedback
* chore: Make ecosystem to datasource one to many
Technically datasource to ecosystem was already many to one in a way, as
maven appeared in the values twice. Once for clojure and once for maven
itself. This changes it so that the ecosystem to datasource is the same
way and looking up by ecosystem you will get multiple datasources
(should match the map above the modified code).
Then to make this work, instead of keying off of datasource for
vulnerabilities we key off of ecosystem so that all of the datasources
that are part of that ecosystem inherit the vulnerabilities for the same
dependency.
* chore: Tweaking to try to force CI/CD retry
* fix(config): resolve repository entry presets in correct order
* refactor: extract `applyHostRules` and `applyNpmrc` to functions
* Reuse applyHostRules in inherited.ts
* Fix test failure
* Improve resolvedRepoEntry log
* Coerce everything
* Fix another test coverage issue
As part of the addition of the new Enrichment modules, we should perform
a prefactor that'll introduce a shared helper for the how we translate
an "Ecosystem" according to OSV with a datasource that Renovate
understands.
Co-authored-by: Claude Opus 4.6 <jamie.tanna+claude-code@mend.io>
As part of the addition of the new Enrichment modules, we should perform
a prefactor that'll introduce helper methods that can be used across
both GitHub and OSV Vulnerability Alerts.
Because each module uses a slightly different input (Datasource ID or an
"Ecosystem" according to OSV) we need to handle both types of inputs.
Co-authored-by: Claude Opus 4.6 <jamie.tanna+claude-code@mend.io>
* refactor(lint): extract custom oxlint rules into separate files
Split `tools/lint/rules.js` into one file per rule under
`tools/lint/rules/`. Also simplify `test-root-describe` with
early-exit guard clauses.
* feat(lint): add `enforce-ts-extension` oxlint rule
Add a custom JS-based oxlint rule that enforces `.ts` extensions on
local imports. The rule catches two problems:
- `.js` extension used instead of `.ts` (auto-fixable)
- missing file extension entirely (report only)
Checked locations:
- static import/export declarations
- dynamic `import()` expressions
- vitest module APIs: `vi.mock`, `vi.doMock`, `vi.unmock`,
`vi.doUnmock`, `vi.importActual`, `vi.importMock`
Both relative paths (`./`, `../`) and path aliases (`~test/`)
are treated as local. Package imports are ignored.
Also fixes 26 pre-existing violations across 18 spec files.
* Update tools/lint/rules/enforce-ts-extension.js
Co-authored-by: Anne Stellingwerf <1637358+astellingwerf@users.noreply.github.com>
---------
Co-authored-by: Anne Stellingwerf <1637358+astellingwerf@users.noreply.github.com>
* feat(vulnerabilities): add support for github-actions vulnerability alerts
* fix failed merge from main
* now for real
* review comments
* remove no longer needed assertion
Jamie Tanna