* fix(gerrit): resolve relative submodule URLs for nested project paths
* Fix tests after rebase
---------
Co-authored-by: Felipe Santos <felipe.santos@ericsson.com>
* refactor(lint): enable oxlint prefer-named-capture-group at error
Numbered capture groups (m[1], $1) break silently when a regex is
edited and group order shifts. Named groups (?<name>...) make intent
explicit and accesses (m.groups.name) resilient to reordering.
This enables the built-in eslint rule prefer-named-capture-group,
surfacing 321 pre-existing unnamed-group violations across ~121
files to be burned down incrementally in follow-up commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(versioning): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations in
lib/modules/versioning/. Unused capture groups (only reachable via
.test() or whole-match) become non-capturing (?:...); groups whose
value is read become named (?<name>...), with accesses rewritten to
match.groups!.<name> (or destructured from .groups!) instead of
positional match[n]/$n so a future edit that reorders groups cannot
silently break the reader.
Two cases needed extra care to preserve behavior:
- semver/common.ts and poetry/patterns.ts split() on a regex whose
capture group is relied upon by String.prototype.split to keep the
separator in the output array; the group is kept capturing and
named, not converted to non-capturing.
- hashicorp/convertor.ts's semverRegex is only ever embedded via
.source into a named `(?<version>...)` group elsewhere and never
matched directly, so its internal groups are safe to make
non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(datasource): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/datasource/. Same treatment as the versioning module:
unused groups become non-capturing, used groups get names, and
positional match[n] reads move to match.groups!.<name>.
docker/ecr.ts and pypi/common.ts keep their positional destructuring
(`const [, region] = ...`, `!!m &&`) working unchanged since a named
capture group is still addressable by its numeric index in
JavaScript — only pypi/common.ts's access was rewritten to
m.groups!.owner for clarity since it read a single group directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(platform): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/platform/. Uses the repo's established idiom of
`match.groups?.<name>` after an optional-chained exec()/match() (see
bitbucket/index.ts hostnameWithoutApiPrefix, gerrit/utils.ts
extractSourceBranch) and `$<name>` in String.replace replacement
strings. Unused groups (markdown/HTML massaging regexes matched only
to be stripped) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups in ansible-galaxy for prefer-named-capture-group
Burns down prefer-named-capture-group violations in
lib/modules/manager/ansible-galaxy/. newBlockRegEx and blockLineRegEx
dropped their unused outer wrapping group (only the inner key/value
groups were ever read) and named the key/value groups; nameMatchRegex's
remaining unused groups (protocol/user-info/port alternatives) become
non-capturing since only source/hostname/depName/version are read via
.groups. Accesses in collections.ts and roles.ts move from
lineMatch[2]/lineMatch[3] to lineMatch.groups!.key/value.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 1)
Burns down prefer-named-capture-group violations across the first
alphabetical slice of lib/modules/manager/ (ansible through mix).
Used groups get names with accesses rewritten to match.groups!.<name>
(or $<name> in replacement strings); groups whose value is never read
become non-capturing (?:...). Two String.split() call sites
(git-submodules/extract.ts, meteor/extract.ts) keep the established
"named group still readable positionally from the split() result
array" idiom instead of restructuring the destructuring.
bazel/rules/go.ts and buildpacks/extract.ts dockerRef verified
byte-for-byte equivalent before/after via a quick node script since
several nested groups collapsed to non-capturing at once.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 2)
Burns down prefer-named-capture-group violations across the remaining
alphabetical slice of lib/modules/manager/ (npm through terragrunt).
Same treatment as batch 1: used groups get names with accesses moved
to match.groups!.<name> or $<name> replacement strings; unused groups
(wrapping alternations, quantifier repetition groups only consumed via
.test(), or values never read from a match) become non-capturing.
terraform/extractors/others/modules.ts and terragrunt/modules.ts share
near-identical URL-parsing regexes (github/bitbucket/git/azure-devops
ref matchers) — the same set of always-unused `depth=`/`&depth=`
query-string groups is converted to non-capturing in both files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(config): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/config/.
Used groups get names with replacement strings switched from $1/$2 to
$<name>; the unused separator group in schedule-migration.ts's
afterBeforeRegex becomes non-capturing. presets/parse.ts keeps
assigning through the already-declared `repo` variable rather than
array-destructuring the exec() result, matching this file's existing
style for the other named-group regexes just above it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(util): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations across lib/util/ and
lib/logger/. Same treatment as previous batches: named groups for
values that are read (via $<name> replacement strings, .groups!.<name>,
or destructured from .groups), non-capturing groups where nothing reads
the captured value (e.g. semantic.ts's angular-commit .test()-only
regex). www-authenticate.ts's tokenizer entries each get their own
named group but keep accessing the match generically via match[1],
since a positionally-indexed named group is still readable by index.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(workers): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/workers/.
Used groups get names with $<name> replacement strings; unused
wrapper/alternation groups (e.g. semantic-commit-message.ts's optional
scope/issue wrappers, release-notes.ts's date-heading and
horizontal-rule matchers that are only probed with .search()/replaced
wholesale) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(test,tools): name capture groups for prefer-named-capture-group
Finishes the prefer-named-capture-group burndown: test/, tools/, and
vitest.config.mts. Groups whose value is read get names ($<name>
replacement strings or .groups.<name> access); groups only used via
.test()/.search() or that feed a .match(/…/g) call (whose return value
is the array of whole matches, not captured groups) become
non-capturing.
This is the last remaining slice of pre-existing violations, so the
rule (already enabled at error repo-wide) now passes with zero
findings across the whole codebase.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* fix prettier failure
* refactor(lint): use a named capture group in `v8-ignore-no-count`
New rule from main trips the newly enabled `prefer-named-capture-group` oxlint rule.
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* refactor(linters): add prefer-coerce-array rule
Refs #45217
`x ?? []` and `coerceArray(x)` say the same thing, but only the second
one is searchable and consistent. The rule flags a `??` whose default is
a bare `[]` literal; a non-empty default or an asserted `([] as Foo[])`
still passes.
Applying it across `lib/` surfaced three spots the helper cannot cover,
which keep `?? []` with a disable comment or a narrower fix:
- `package-files.ts` destructures a tuple, which `coerceArray()` widens
- `generate.spec.ts` defaults `matchAll()`, an iterator rather than an array
- `mise/upgradeable-tooling.ts` declares a `Record` return, so its
`?? []` fallback was wrong to begin with and becomes `coerceObject()`
* refactor(platform/github): hoist the GHE version header lookup
`Object.entries(...).find()` returns a tuple, and defaulting it with
`?? []` only to destructure the second element reads as an array
default when it is not one. Name the found entry instead, which drops
the `?? []` rather than routing a tuple through `coerceArray()`.
* ci(linter): add renovate/require-regex-util rule
Adds a custom oxlint rule that flags raw RegExp usage in lib/
production code: any `new RegExp(...)` call and any regex literal
that is not the direct first argument of `regEx(...)`. The regEx()
helper from lib/util/regex.ts uses the RE2 engine for ReDoS-safe
matching and caches compiled patterns. lib/util/regex.ts itself is
exempt.
The rule is disabled for **/*.spec.ts, test/**, and tools/** via
config overrides, because vitest APIs such as expect.stringMatching
need bare RegExp instances (a past commit reverted regEx() there).
Severity is set to "warn" instead of "error": the repo currently has
197 pre-existing violations (above the agreed mechanical-fix
threshold of 80), and a number of them are deliberately
RE2-incompatible patterns (lookahead/lookbehind/named backreferences,
see TODO #12872/#12875 markers in e.g. lib/modules/versioning/rez/
pattern.ts and lib/modules/manager/dockerfile/extract.ts) that need
per-site judgment before they can be wrapped in regEx() or suppressed
with a justified disable comment. No violation fixes are included in
this commit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): enforce renovate/require-regex-util at error
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: use regEx() for regex literals and RegExp construction in lib
Burn down all renovate/require-regex-util violations (197):
- wrap RE2-compatible regex literals and RegExp constructions in regEx()
- rewrite lookaround patterns where behavior is provably preserved:
goproxy separator split, sbt-package link extraction, leiningen
comment stripping and keyword search, npm GitHub owner validation
(unit-count bound replaced by an explicit length check)
- keep native RegExp with disable comments where RE2 cannot be used:
moo / good-enough-parser lexer patterns (moo rejects RE2 instances),
MigrationsService propertyName (matched via isRegExp, which RE2
instances fail), rez named backreferences and lookaheads, GitHub
markdown link negative lookbehind, emoji astral-plane matching
- drop stale TODO #12875 comments for patterns current re2 handles
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: reduce require-regex-util disable comments
Rewrite the github massage-markdown-links URL regex to capture an
optional `api.` prefix in a named group (skipped in code) instead of
relying on a negative lookbehind, so both the base and global variants
can use regEx()/RE2 and their two disable comments are removed. Add
spec cases for api-prefixed URLs that match the URL shape.
Consolidate the four related line disables in rez/pattern.ts (bound and
range patterns emulating Python conditional patterns via named
backreferences and lookaheads, which RE2 cannot express) into a single
block disable/enable pair, matching the treatment of the lexer files.
Disable comment count drops from 13 to 8.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor(datasource/sbt-package): use named capture group in link regex
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor(manager/cake): restore original multiLineComment regex spelling
The [^] -> [\\s\\S] rewrite was only needed for an RE2 wrap that was
later reverted; keep the diff minimal.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(datasource/go): skip empty GOPROXY segments
The switch from a lookahead split to a capture-group split (needed because
RE2 has no lookahead support) changed how empty GOPROXY segments parse:
`a|,b` yielded `{ url: ',', fallback: '|' }` before and
`{ url: '', fallback: ',' }` after. The comma fallback only continues on
404/410, so a failing proxy ahead of an empty segment silently stopped the
lookup instead of falling through to the remaining proxies.
Empty segments carry no url to query, so drop them.
* refactor(datasource/go): use isTruthy for empty segment filter
* fix(datasource/go): filter empty segments before mapping
Filtering after the map broke the contextual typing from the
GoproxyItem[] annotation, widening fallback to string.
* refactor(platform/github): use regEx() for merge queue query stripping
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): add renovate/v8-ignore-reason rule
Flag coverage-ignore comments ("v8 ignore") that carry no justification.
Accepted forms: "-- reason" / "--- reason" (recommended) and the legacy
colon form "v8 ignore <kind>[ <count>]: reason", which is already
widespread in the codebase (29 sites). Bare "v8 ignore stop" markers are
exempt because the justification lives on the paired "start" marker. The
"v8 ignore next <N>" count form remains allowed; this rule only requires
a justification.
Registered as "warn" instead of "error": the repo currently has 119
reason-less v8 ignore comments, too many to fix mechanically in one PR,
so existing sites are left untouched and can be fixed incrementally.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): promote renovate/v8-ignore-reason to error
Record the empirical verdict on the contested "v8 ignore next <N>" count
semantics in the rule doc: verified against vitest 4 with
ast-v8-to-istanbul that the count is not honored - the ignore hint always
exempts exactly the next AST node regardless of N. Counts are therefore
inert and stay allowed; the rule keeps requiring only a justification.
Promoting to error so all remaining reason-less coverage-ignore comments
must be fixed; the burndown follows in subsequent commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 1)
Give every reason-less "v8 ignore" comment outside the large platform
index files a site-specific justification explaining why the exempted
branch is untestable or defensive, as now required by the
renovate/v8-ignore-reason rule.
Also guard against a nullish comment.loc in the rule itself; the
merged-in stricter tools typechecking flagged the unguarded access.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 2)
Cover the five large platform index files (github, bitbucket,
bitbucket-server, codecommit, gitlab) with site-specific reasons on
every "v8 ignore" comment, completing the renovate/v8-ignore-reason
burndown. Two meaningless ignore hints inside commented-out CodeCommit
mergePr code are dropped instead of annotated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* Apply suggestions from code review
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
* Update lib/util/regex.ts
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
* feat(git): validate length commit shas
* test: adapt test mocks
* chore: update import paths
* feat(git): make the validation more strict and support repositories using sha256
* test: add fakeSha function for deterministic git commit shas in tests
* fix(platform/gerrit): replace getJsonUnchecked with validated getJson
Migrate all getJsonUnchecked calls in lib/modules/platform/gerrit/client.ts
to use Zod-validated getJson. Co-locate schemas in schema.ts with lenient
optional fields to ensure backward compatibility with all existing API responses.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* strictly follow previous interfaces
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat: Gerrit supports gitUrl
This change adds support for the gitUrl parameter to the gerrit platform.
It queries the gerrit server to check what download options are available. If ssh is selected but not available, it will throw an error.
* feat: Gerrit supports gitUrl
This removes support for querying the supported download schemes and
instead hard-codes the default ssh port.
* fix: Review feedback
Addresses feedback left in review:
- constants for ports
- better SSH url creation
- more consistent util method usage
* fix: Review feedback
Addresses feedback left in review:
- Reverts SSH URL creation to ensure coverage target
* fix: Review feedback
Addresses feedback left in review:
- Convert switch statement to if/else
- Move endpointURL check into getGerritResponse
This makes the parse/clone calls unnecessary.
* fix: Review feedback
Addresses feedback left in review:
- Simplify ssh url creation
* fix(gerrit): use most efficient search operators based on Gerrit version
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
* Address review comments
* Use ignore if instead
* Rename client.version to client.gerritVersion
* Update lib/modules/platform/gerrit/client.spec.ts
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
---------
Signed-off-by: Felipe Santos <felipe.santos@ericsson.com>
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
Dharma Teja Thoutam