* refactor(lint): enable oxlint prefer-named-capture-group at error
Numbered capture groups (m[1], $1) break silently when a regex is
edited and group order shifts. Named groups (?<name>...) make intent
explicit and accesses (m.groups.name) resilient to reordering.
This enables the built-in eslint rule prefer-named-capture-group,
surfacing 321 pre-existing unnamed-group violations across ~121
files to be burned down incrementally in follow-up commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(versioning): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations in
lib/modules/versioning/. Unused capture groups (only reachable via
.test() or whole-match) become non-capturing (?:...); groups whose
value is read become named (?<name>...), with accesses rewritten to
match.groups!.<name> (or destructured from .groups!) instead of
positional match[n]/$n so a future edit that reorders groups cannot
silently break the reader.
Two cases needed extra care to preserve behavior:
- semver/common.ts and poetry/patterns.ts split() on a regex whose
capture group is relied upon by String.prototype.split to keep the
separator in the output array; the group is kept capturing and
named, not converted to non-capturing.
- hashicorp/convertor.ts's semverRegex is only ever embedded via
.source into a named `(?<version>...)` group elsewhere and never
matched directly, so its internal groups are safe to make
non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(datasource): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/datasource/. Same treatment as the versioning module:
unused groups become non-capturing, used groups get names, and
positional match[n] reads move to match.groups!.<name>.
docker/ecr.ts and pypi/common.ts keep their positional destructuring
(`const [, region] = ...`, `!!m &&`) working unchanged since a named
capture group is still addressable by its numeric index in
JavaScript — only pypi/common.ts's access was rewritten to
m.groups!.owner for clarity since it read a single group directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(platform): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/platform/. Uses the repo's established idiom of
`match.groups?.<name>` after an optional-chained exec()/match() (see
bitbucket/index.ts hostnameWithoutApiPrefix, gerrit/utils.ts
extractSourceBranch) and `$<name>` in String.replace replacement
strings. Unused groups (markdown/HTML massaging regexes matched only
to be stripped) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups in ansible-galaxy for prefer-named-capture-group
Burns down prefer-named-capture-group violations in
lib/modules/manager/ansible-galaxy/. newBlockRegEx and blockLineRegEx
dropped their unused outer wrapping group (only the inner key/value
groups were ever read) and named the key/value groups; nameMatchRegex's
remaining unused groups (protocol/user-info/port alternatives) become
non-capturing since only source/hostname/depName/version are read via
.groups. Accesses in collections.ts and roles.ts move from
lineMatch[2]/lineMatch[3] to lineMatch.groups!.key/value.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 1)
Burns down prefer-named-capture-group violations across the first
alphabetical slice of lib/modules/manager/ (ansible through mix).
Used groups get names with accesses rewritten to match.groups!.<name>
(or $<name> in replacement strings); groups whose value is never read
become non-capturing (?:...). Two String.split() call sites
(git-submodules/extract.ts, meteor/extract.ts) keep the established
"named group still readable positionally from the split() result
array" idiom instead of restructuring the destructuring.
bazel/rules/go.ts and buildpacks/extract.ts dockerRef verified
byte-for-byte equivalent before/after via a quick node script since
several nested groups collapsed to non-capturing at once.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 2)
Burns down prefer-named-capture-group violations across the remaining
alphabetical slice of lib/modules/manager/ (npm through terragrunt).
Same treatment as batch 1: used groups get names with accesses moved
to match.groups!.<name> or $<name> replacement strings; unused groups
(wrapping alternations, quantifier repetition groups only consumed via
.test(), or values never read from a match) become non-capturing.
terraform/extractors/others/modules.ts and terragrunt/modules.ts share
near-identical URL-parsing regexes (github/bitbucket/git/azure-devops
ref matchers) — the same set of always-unused `depth=`/`&depth=`
query-string groups is converted to non-capturing in both files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(config): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/config/.
Used groups get names with replacement strings switched from $1/$2 to
$<name>; the unused separator group in schedule-migration.ts's
afterBeforeRegex becomes non-capturing. presets/parse.ts keeps
assigning through the already-declared `repo` variable rather than
array-destructuring the exec() result, matching this file's existing
style for the other named-group regexes just above it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(util): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations across lib/util/ and
lib/logger/. Same treatment as previous batches: named groups for
values that are read (via $<name> replacement strings, .groups!.<name>,
or destructured from .groups), non-capturing groups where nothing reads
the captured value (e.g. semantic.ts's angular-commit .test()-only
regex). www-authenticate.ts's tokenizer entries each get their own
named group but keep accessing the match generically via match[1],
since a positionally-indexed named group is still readable by index.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(workers): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/workers/.
Used groups get names with $<name> replacement strings; unused
wrapper/alternation groups (e.g. semantic-commit-message.ts's optional
scope/issue wrappers, release-notes.ts's date-heading and
horizontal-rule matchers that are only probed with .search()/replaced
wholesale) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(test,tools): name capture groups for prefer-named-capture-group
Finishes the prefer-named-capture-group burndown: test/, tools/, and
vitest.config.mts. Groups whose value is read get names ($<name>
replacement strings or .groups.<name> access); groups only used via
.test()/.search() or that feed a .match(/…/g) call (whose return value
is the array of whole matches, not captured groups) become
non-capturing.
This is the last remaining slice of pre-existing violations, so the
rule (already enabled at error repo-wide) now passes with zero
findings across the whole codebase.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* fix prettier failure
* refactor(lint): use a named capture group in `v8-ignore-no-count`
New rule from main trips the newly enabled `prefer-named-capture-group` oxlint rule.
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): add renovate/v8-ignore-reason rule
Flag coverage-ignore comments ("v8 ignore") that carry no justification.
Accepted forms: "-- reason" / "--- reason" (recommended) and the legacy
colon form "v8 ignore <kind>[ <count>]: reason", which is already
widespread in the codebase (29 sites). Bare "v8 ignore stop" markers are
exempt because the justification lives on the paired "start" marker. The
"v8 ignore next <N>" count form remains allowed; this rule only requires
a justification.
Registered as "warn" instead of "error": the repo currently has 119
reason-less v8 ignore comments, too many to fix mechanically in one PR,
so existing sites are left untouched and can be fixed incrementally.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): promote renovate/v8-ignore-reason to error
Record the empirical verdict on the contested "v8 ignore next <N>" count
semantics in the rule doc: verified against vitest 4 with
ast-v8-to-istanbul that the count is not honored - the ignore hint always
exempts exactly the next AST node regardless of N. Counts are therefore
inert and stay allowed; the rule keeps requiring only a justification.
Promoting to error so all remaining reason-less coverage-ignore comments
must be fixed; the burndown follows in subsequent commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 1)
Give every reason-less "v8 ignore" comment outside the large platform
index files a site-specific justification explaining why the exempted
branch is untestable or defensive, as now required by the
renovate/v8-ignore-reason rule.
Also guard against a nullish comment.loc in the rule itself; the
merged-in stricter tools typechecking flagged the unguarded access.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor: add justifications to coverage-ignore comments (batch 2)
Cover the five large platform index files (github, bitbucket,
bitbucket-server, codecommit, gitlab) with site-specific reasons on
every "v8 ignore" comment, completing the renovate/v8-ignore-reason
burndown. Two meaningless ignore hints inside commented-out CodeCommit
mergePr code are dropped instead of annotated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* Apply suggestions from code review
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
* Update lib/util/regex.ts
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
When a PR created on Azure is inside a project or repository that has
additional policy evaluations that need to be fulfilled for a given PR,
we should not attempt to perform a manual `mergePr` unless the policies
allow us to.
Previously, we would attempt to `mergePr` and would result in
DEBUG: Failed to set the PR as completed.
Platform-native auto-merge functionality would still work as expected,
as once the evaluations had succeeded (for instance, a PR is approved by
a human) Azure will auto-merge it.
However, the failure in attempting to merge it is noisy, and should be
avoided by evaluating the policies before attempting to merge.
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
Enable no-else-return (with allowElseIf: false) and unicorn/no-lonely-if
as errors in .oxlintrc.json and fix all 131 pre-existing violations
(91 no-else-return, 40 unicorn/no-lonely-if) across 98 files.
The no-else-return violations were fixed with the oxlint autofix
(iterated to a fixpoint, plus two else-if chains that required
--fix-dangerously) followed by Prettier formatting. One comment dropped
by the autofix in lib/modules/manager/pub/artifacts.ts was restored
manually. The unicorn/no-lonely-if violations were merged by hand,
preserving comments and coverage-ignore hints.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The `#(\d+)` -> `!$1` replacement added in #42758 over-matched any `#`
followed by digits, corrupting HTML entities such as `​` (becomes
`&!8203;`) and changelog URL anchors such as `CHANGELOG.md#4780` (becomes
`!4780`) in Azure DevOps PR bodies.
Only convert a standalone reference preceded by start-of-string, whitespace
or `(`, matching the boundary already used in util/markdown.ts.
* Add support for Azure DevOps in dependency dashboards feature
related #9592
* Add missing test for got wrapper
* Apply all current CR suggestions
* fix: resolve eslint and tsx issues in Azure platform code
* test: add coverage for issue.number undefined cases
Add test cases to ensure proper handling when:
- Trying to reopen an issue without a number
- Trying to update an issue without a number
This improves code coverage for the null checks added in previous commit.
* test: fix and add tests of azure/issue.ts to up coverage
there was mismatch in mock resulting in testing of different code branch
* refactor: address review feedback
* fix: type-check
* refactor: address review feedback round 2
* apply suggestions
* Apply suggestions from code review
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
* refactor: use partial helper and remove host-rules mock in issue.spec.ts
* more changes from suggestions
* Update lib/modules/platform/azure/issue.spec.ts
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
---------
Co-authored-by: Viktorie Novotná <viktorie.novotna@drmax.eu>
Co-authored-by: Sebastian Poxhofer <secustor@users.noreply.github.com>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
As a means to improve debuggability of Azure's `platformAutomerge` and
`autoApprove`, we can provide a log line to provide more context of what
we're changing.
Sebastian Poxhofer