* test(manager): replace file snapshots with explicit assertions
* test(manager): replace inline snapshots with explicit assertions
* test(manager): assert on relevant sections instead of full bodies
* test(manager): drop assertions implied by full equality
* test(manager): address review feedback
* test(manager): assert depType and versioning in the regex matcher
* refactor(lint): enable oxlint prefer-named-capture-group at error
Numbered capture groups (m[1], $1) break silently when a regex is
edited and group order shifts. Named groups (?<name>...) make intent
explicit and accesses (m.groups.name) resilient to reordering.
This enables the built-in eslint rule prefer-named-capture-group,
surfacing 321 pre-existing unnamed-group violations across ~121
files to be burned down incrementally in follow-up commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(versioning): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations in
lib/modules/versioning/. Unused capture groups (only reachable via
.test() or whole-match) become non-capturing (?:...); groups whose
value is read become named (?<name>...), with accesses rewritten to
match.groups!.<name> (or destructured from .groups!) instead of
positional match[n]/$n so a future edit that reorders groups cannot
silently break the reader.
Two cases needed extra care to preserve behavior:
- semver/common.ts and poetry/patterns.ts split() on a regex whose
capture group is relied upon by String.prototype.split to keep the
separator in the output array; the group is kept capturing and
named, not converted to non-capturing.
- hashicorp/convertor.ts's semverRegex is only ever embedded via
.source into a named `(?<version>...)` group elsewhere and never
matched directly, so its internal groups are safe to make
non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(datasource): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/datasource/. Same treatment as the versioning module:
unused groups become non-capturing, used groups get names, and
positional match[n] reads move to match.groups!.<name>.
docker/ecr.ts and pypi/common.ts keep their positional destructuring
(`const [, region] = ...`, `!!m &&`) working unchanged since a named
capture group is still addressable by its numeric index in
JavaScript — only pypi/common.ts's access was rewritten to
m.groups!.owner for clarity since it read a single group directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(platform): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/platform/. Uses the repo's established idiom of
`match.groups?.<name>` after an optional-chained exec()/match() (see
bitbucket/index.ts hostnameWithoutApiPrefix, gerrit/utils.ts
extractSourceBranch) and `$<name>` in String.replace replacement
strings. Unused groups (markdown/HTML massaging regexes matched only
to be stripped) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups in ansible-galaxy for prefer-named-capture-group
Burns down prefer-named-capture-group violations in
lib/modules/manager/ansible-galaxy/. newBlockRegEx and blockLineRegEx
dropped their unused outer wrapping group (only the inner key/value
groups were ever read) and named the key/value groups; nameMatchRegex's
remaining unused groups (protocol/user-info/port alternatives) become
non-capturing since only source/hostname/depName/version are read via
.groups. Accesses in collections.ts and roles.ts move from
lineMatch[2]/lineMatch[3] to lineMatch.groups!.key/value.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 1)
Burns down prefer-named-capture-group violations across the first
alphabetical slice of lib/modules/manager/ (ansible through mix).
Used groups get names with accesses rewritten to match.groups!.<name>
(or $<name> in replacement strings); groups whose value is never read
become non-capturing (?:...). Two String.split() call sites
(git-submodules/extract.ts, meteor/extract.ts) keep the established
"named group still readable positionally from the split() result
array" idiom instead of restructuring the destructuring.
bazel/rules/go.ts and buildpacks/extract.ts dockerRef verified
byte-for-byte equivalent before/after via a quick node script since
several nested groups collapsed to non-capturing at once.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 2)
Burns down prefer-named-capture-group violations across the remaining
alphabetical slice of lib/modules/manager/ (npm through terragrunt).
Same treatment as batch 1: used groups get names with accesses moved
to match.groups!.<name> or $<name> replacement strings; unused groups
(wrapping alternations, quantifier repetition groups only consumed via
.test(), or values never read from a match) become non-capturing.
terraform/extractors/others/modules.ts and terragrunt/modules.ts share
near-identical URL-parsing regexes (github/bitbucket/git/azure-devops
ref matchers) — the same set of always-unused `depth=`/`&depth=`
query-string groups is converted to non-capturing in both files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(config): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/config/.
Used groups get names with replacement strings switched from $1/$2 to
$<name>; the unused separator group in schedule-migration.ts's
afterBeforeRegex becomes non-capturing. presets/parse.ts keeps
assigning through the already-declared `repo` variable rather than
array-destructuring the exec() result, matching this file's existing
style for the other named-group regexes just above it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(util): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations across lib/util/ and
lib/logger/. Same treatment as previous batches: named groups for
values that are read (via $<name> replacement strings, .groups!.<name>,
or destructured from .groups), non-capturing groups where nothing reads
the captured value (e.g. semantic.ts's angular-commit .test()-only
regex). www-authenticate.ts's tokenizer entries each get their own
named group but keep accessing the match generically via match[1],
since a positionally-indexed named group is still readable by index.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(workers): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/workers/.
Used groups get names with $<name> replacement strings; unused
wrapper/alternation groups (e.g. semantic-commit-message.ts's optional
scope/issue wrappers, release-notes.ts's date-heading and
horizontal-rule matchers that are only probed with .search()/replaced
wholesale) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(test,tools): name capture groups for prefer-named-capture-group
Finishes the prefer-named-capture-group burndown: test/, tools/, and
vitest.config.mts. Groups whose value is read get names ($<name>
replacement strings or .groups.<name> access); groups only used via
.test()/.search() or that feed a .match(/…/g) call (whose return value
is the array of whole matches, not captured groups) become
non-capturing.
This is the last remaining slice of pre-existing violations, so the
rule (already enabled at error repo-wide) now passes with zero
findings across the whole codebase.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* fix prettier failure
* refactor(lint): use a named capture group in `v8-ignore-no-count`
New rule from main trips the newly enabled `prefer-named-capture-group` oxlint rule.
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* feat(lint): add renovate/prefer-is-helpers and renovate/prefer-is-object rules
Flag ad-hoc type checks that have @sindresorhus/is equivalents:
- .filter(Boolean) -> .filter(isTruthy)
- typeof x === 'string' -> isString(x)
- x === null || x === undefined -> isNullOrUndefined(x) (and negation)
The typeof x === 'object' shape lives in a separate suggestion-only rule
(renovate/prefer-is-object, kept at warn) because isObject()/isPlainObject()
are not drop-in equivalents: null, arrays and functions behave differently.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: fix renovate/prefer-is-helpers violations
Replace ad-hoc type checks with @sindresorhus/is helpers across lib/:
- 13x .filter(Boolean) -> .filter(isTruthy)
- 36x typeof x ==/!== 'string' -> isString(x) / !isString(x)
- 6x x === null || x === undefined -> isNullOrUndefined(x) (and negation)
Promote renovate/prefer-is-helpers to error now that the codebase is clean.
renovate/prefer-is-object stays at warn: its 15 remaining sites guard
parsed YAML/JSON or unknown values where isObject()/isPlainObject() are
not provably equivalent (null/array/function semantics).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: enforce renovate/prefer-is-object at error level
Resolve the 15 remaining warnings and raise the rule from warn to error:
- Migrate 10 sites to isObject() where the guarded value provably cannot
be a function (parsed YAML/JSON, typed exec command arguments, or
test-controlled fixtures): helm-values, woodpecker, bun, pre-commit
managers, exec utils, file package cache, and the github http spec.
In the bun manager this also fixes a latent crash where a null
`workspaces` value would throw on the `in` operator.
- Keep 5 sites as reasoned oxlint-disable comments where excluding
functions is load-bearing: the byte-exact fingerprint canonicalizer
(2), the circularity walker, the zod result guard, and the generic
hasKey helper.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(lint): add renovate/inline-single-use-fixtures rule
In spec files, a module-scope const fixture that is referenced from
exactly one it()/test() block should be inlined into that test so the
test is self-contained. The rule is a warn-level nudge (naming for
clarity is a valid exception) with no autofix (moving code is risky).
Uses oxlint jsPlugins scope analysis (getDeclaredVariables) for exact,
shadowing-safe reference counting and bails out conservatively: only
top-level non-exported single-declarator consts with multiline,
non-function initializers whose every reference sits inside the callback
function of one and the same test call are flagged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: inline single-use spec fixtures into their tests
Fix 26 renovate/inline-single-use-fixtures warnings in specs where the
move is mechanical and value-preserving: codeBlock fixtures were
re-indented uniformly (codeBlock strips the common indentation, so the
produced string is unchanged) and Fixtures.get() calls resolve relative
to the spec file, so relocating them inside the test body has no effect.
The remaining 59 warnings are left for per-site judgment, as the rule is
a warn-level nudge by design.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: inline remaining relocation-safe single-use spec fixtures
Move the 24 remaining single-use module-scope fixtures whose initializer
is a codeBlock tagged template or a Fixtures accessor call into the one
it() block that uses them. Both shapes are value-preserving to relocate:
codeBlock strips the common leading indentation, so the uniformly
re-indented templates produce identical strings, and Fixtures.get()
resolves relative to the spec file, not the call site's position in it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat(lint): enforce inline-single-use-fixtures as error
Narrow the rule to the initializer shapes where moving the declaration
into the test body is provably value-preserving and unambiguously an
improvement: codeBlock/stripIndent tagged templates (indentation-
normalizing, so re-indenting is safe) and Fixtures accessor calls
(resolve relative to the spec file). Plain object/array literals,
untagged template literals (whose leading-newline formatting would need
ugly re-indentation) and arbitrary call expressions remain per-site
judgment calls and are no longer flagged.
With the rule reduced to true defects and all remaining violations
inlined, bump it from warn to error in the spec override block.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: inline contents of fixtures relocated into single-use tests
The previous commits moved single-use module-scope Fixtures.get() consts
into their one it() block, which only relocated the file indirection.
Replace those relocated Fixtures.get() calls with the fixture file's
actual content — codeBlock tagged templates for text fixtures — so the
tests are self-contained, and delete the fixture files that no longer
have any references. Relocated fixtures too large to inline comfortably
(terraform-provider releases, sbt private-variable file, nuget v2 pkg
list, bundled package-lock) keep their Fixtures.get() calls.
Value preservation was verified by unchanged vitest results for every
touched spec; all consumers parse the content, so codeBlock's trailing
newline normalization is behavior-neutral.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: inline remaining large single-use fixtures
Inline the four Fixtures.get() sites that were previously exempted for
size, so every single-use fixture is now inlined regardless of size:
- nuget v2_withoutProjectUrl.xml -> codeBlock (served via http mock)
- terraform-provider releaseBackendIndexGoogleBeta.json -> plain object
literal passed to the nock reply
- npm locked-dependency bundled.package-lock.json -> codeBlock JSON
string (consumed as raw lockFileContent)
- sbt private-variable-dependency-file.scala -> codeBlock
All consumers parse the content, so codeBlock's trailing-newline
normalization is behavior-neutral; vitest results are unchanged for
every touched spec, including the two pre-existing nuget failures.
The nuget, terraform-provider and sbt fixture files have no remaining
references and are deleted. bundled.package-lock.json is kept because
package-lock/get-locked.spec.ts still reads it via Fixtures.getJson().
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: keep large bundled package-lock fixture in a file
The bundled package-lock.json inlined into the "fails remediation if
bundled" test is ~150 KB (~4,400 lines); inlining it as a codeBlock
hurts readability more than it helps. Read it via Fixtures.get inside
the test block instead — the inline-single-use-fixtures rule permits a
Fixtures.get() call in test scope, and the fixture file is still present.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* refactor(oxlint): enable func-style
Enable the built-in func-style rule as ["warn", "declaration"] so that
named functions are written as function declarations instead of arrow or
function expressions assigned to variables, matching the convention in
docs/development/best-practices.md (Functions section). Inline arrow
callbacks are unaffected; prefer-arrow-callback continues to cover the
callback direction.
Severity is "warn" instead of "error" as a fallback: a repo-wide run
found 196 pre-existing violations (70 in spec files, 126 in production
code), exceeding the 80-violation fix threshold for this change, so no
violations were fixed here. Follow-up work can convert the offenders
(largest clusters: lib/modules/versioning/ruby, lib/util/cache/package,
lib/modules/versioning/maven, lib/modules/versioning/gradle) and then
raise the rule to "error". Note oxlint 1.72 also supports an
allowTypeAnnotation option if typed consts should remain arrows.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci(linter): enforce func-style at error
* refactor(func-style): convert const-arrow functions to declarations in with-cache spec and ruby versioning
* refactor(func-style): convert const-arrow functions to declarations in maven/gradle modules
* refactor(func-style): convert const-arrow functions to declarations in remaining versioning modules
* refactor(func-style): convert const-arrow functions to declarations in platform modules
Discriminated-union closures (ensureCommentRemoval byTopic/byContent
helpers in github, gitlab, bitbucket, bitbucket-server) needed the
narrowed field passed explicitly as a parameter, since function
declarations are hoisted and lose the outer if-narrowing that inline
arrow-function closures previously relied on.
* refactor(func-style): convert const-arrow functions to declarations across util/manager/datasource modules
One case (logger/renovate-logger.ts logOnceFn) is kept as an arrow
function with a documented oxlint-disable: it is stored on
this.logger.once[level] and relies on lexically-bound this, which a
hoisted function declaration would not preserve.
* refactor(func-style): convert remaining const-arrow test helpers to declarations
get-updated.spec.ts: hoisted expectPipCompilePackageAndLockFile to
module scope (it only closes over the module-level pipCompile mock)
and added a documented oxlint-disable for vitest/expect-expect on its
caller test, since oxlint's expect-expect check does not trace
assertions through an externally-defined helper function.
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Enable no-else-return (with allowElseIf: false) and unicorn/no-lonely-if
as errors in .oxlintrc.json and fix all 131 pre-existing violations
(91 no-else-return, 40 unicorn/no-lonely-if) across 98 files.
The no-else-return violations were fixed with the oxlint autofix
(iterated to a fixpoint, plus two else-if chains that required
--fix-dangerously) followed by Prettier formatting. One comment dropped
by the autofix in lib/modules/manager/pub/artifacts.ts was restored
manually. The unicorn/no-lonely-if violations were merged by hand,
preserving comments and coverage-ignore hints.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* docs: explicitly document `depTypes` each manager supports
A long-standing question we receive is "what `depTypes` can I match
against in my project".
Although the best recommendation we usually have is "check the
`packageFiles with updates" log line (as a very key log line for users),
we can go one step further and try and create a stronger contract.
To do this, I've used Claude Sonnet 4.6 to work through the codebase,
determine areas that a `depType` is set in a manager (statically or
dynamically) and generate a structured, typed, means to document how
they're used.
Through a few iterations of the process, and attempts at human-written
documentation, we've settled on:
- prioritising autogenerated documentation (for humans to read) to note
what `depTypes` are known, and what they are
- `knownDepTypes`, to describe any known, static, `depType`s and their
human-readable meaning
- with the `prettyDepType`, if used
- `supportsDynamicDepTypesNote`, to add a Markdown note to the generated
documentation
While here, we also:
- make sure to note this in the "adding a new package manager"
documentation
- remove any hand-written references to `depTypes` in each manager's
documentation page
- correct the Gleam `depTypes`
- make sure to use the `knownDepTypes`'s `prettyDepType` definition if
we know it, for a given `depType`
The descriptions have been generated by Claude Sonnet, with some
human-written tweaks where appropriate.
[0]: https://github.com/renovatebot/renovate/discussions/15176
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
* fixup! docs: explicitly document `depTypes` each manager supports
* docs(manager): display `depTypes` documentation if none present
For consistency, and to make it more explicit.
---------
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
* fix(sbt/manager): allow addCompilerPlugin
* add test case
* fix: toMatchObject
* yarn run jest:14 -u
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
Renames `lookupName` to be `packageName`.
BREAKING CHANGE: Use `packageName` instead of `lookupName` if interacting with Renovate datasources directly.
Sebastian Poxhofer