* feat(manager): share OCI Helm chart resolution across managers
Add getOciChartDep() to helmv3/oci.ts and use it in argocd, fleet, flux,
helmfile, helmsman, helmv3, kustomize, sveltos, terraform and vendir.
- set pinDigests: false for OCI charts in all of them
- apply registryAliases to OCI charts in argocd, helmfile and helmsman
- keep the registry port in terraform helm_release repositories
- skip fleet OCI charts without a version instead of using 'undefined'
* docs(manager/helmv3): correct the OCI chart pinDigests rationale
* refactor(manager/helmfile): drop redundant OCI repository url guard
The repository schema already requires url to be a string, so the falsy
branch could not be reached by parsed input and left the patch partially
covered.
* refactor(lint): enable oxlint prefer-named-capture-group at error
Numbered capture groups (m[1], $1) break silently when a regex is
edited and group order shifts. Named groups (?<name>...) make intent
explicit and accesses (m.groups.name) resilient to reordering.
This enables the built-in eslint rule prefer-named-capture-group,
surfacing 321 pre-existing unnamed-group violations across ~121
files to be burned down incrementally in follow-up commits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(versioning): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations in
lib/modules/versioning/. Unused capture groups (only reachable via
.test() or whole-match) become non-capturing (?:...); groups whose
value is read become named (?<name>...), with accesses rewritten to
match.groups!.<name> (or destructured from .groups!) instead of
positional match[n]/$n so a future edit that reorders groups cannot
silently break the reader.
Two cases needed extra care to preserve behavior:
- semver/common.ts and poetry/patterns.ts split() on a regex whose
capture group is relied upon by String.prototype.split to keep the
separator in the output array; the group is kept capturing and
named, not converted to non-capturing.
- hashicorp/convertor.ts's semverRegex is only ever embedded via
.source into a named `(?<version>...)` group elsewhere and never
matched directly, so its internal groups are safe to make
non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(datasource): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/datasource/. Same treatment as the versioning module:
unused groups become non-capturing, used groups get names, and
positional match[n] reads move to match.groups!.<name>.
docker/ecr.ts and pypi/common.ts keep their positional destructuring
(`const [, region] = ...`, `!!m &&`) working unchanged since a named
capture group is still addressable by its numeric index in
JavaScript — only pypi/common.ts's access was rewritten to
m.groups!.owner for clarity since it read a single group directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(platform): name capture groups for prefer-named-capture-group
Burns down all prefer-named-capture-group violations under
lib/modules/platform/. Uses the repo's established idiom of
`match.groups?.<name>` after an optional-chained exec()/match() (see
bitbucket/index.ts hostnameWithoutApiPrefix, gerrit/utils.ts
extractSourceBranch) and `$<name>` in String.replace replacement
strings. Unused groups (markdown/HTML massaging regexes matched only
to be stripped) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups in ansible-galaxy for prefer-named-capture-group
Burns down prefer-named-capture-group violations in
lib/modules/manager/ansible-galaxy/. newBlockRegEx and blockLineRegEx
dropped their unused outer wrapping group (only the inner key/value
groups were ever read) and named the key/value groups; nameMatchRegex's
remaining unused groups (protocol/user-info/port alternatives) become
non-capturing since only source/hostname/depName/version are read via
.groups. Accesses in collections.ts and roles.ts move from
lineMatch[2]/lineMatch[3] to lineMatch.groups!.key/value.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 1)
Burns down prefer-named-capture-group violations across the first
alphabetical slice of lib/modules/manager/ (ansible through mix).
Used groups get names with accesses rewritten to match.groups!.<name>
(or $<name> in replacement strings); groups whose value is never read
become non-capturing (?:...). Two String.split() call sites
(git-submodules/extract.ts, meteor/extract.ts) keep the established
"named group still readable positionally from the split() result
array" idiom instead of restructuring the destructuring.
bazel/rules/go.ts and buildpacks/extract.ts dockerRef verified
byte-for-byte equivalent before/after via a quick node script since
several nested groups collapsed to non-capturing at once.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(manager): name capture groups for prefer-named-capture-group (batch 2)
Burns down prefer-named-capture-group violations across the remaining
alphabetical slice of lib/modules/manager/ (npm through terragrunt).
Same treatment as batch 1: used groups get names with accesses moved
to match.groups!.<name> or $<name> replacement strings; unused groups
(wrapping alternations, quantifier repetition groups only consumed via
.test(), or values never read from a match) become non-capturing.
terraform/extractors/others/modules.ts and terragrunt/modules.ts share
near-identical URL-parsing regexes (github/bitbucket/git/azure-devops
ref matchers) — the same set of always-unused `depth=`/`&depth=`
query-string groups is converted to non-capturing in both files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(config): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/config/.
Used groups get names with replacement strings switched from $1/$2 to
$<name>; the unused separator group in schedule-migration.ts's
afterBeforeRegex becomes non-capturing. presets/parse.ts keeps
assigning through the already-declared `repo` variable rather than
array-destructuring the exec() result, matching this file's existing
style for the other named-group regexes just above it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(util): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations across lib/util/ and
lib/logger/. Same treatment as previous batches: named groups for
values that are read (via $<name> replacement strings, .groups!.<name>,
or destructured from .groups), non-capturing groups where nothing reads
the captured value (e.g. semantic.ts's angular-commit .test()-only
regex). www-authenticate.ts's tokenizer entries each get their own
named group but keep accessing the match generically via match[1],
since a positionally-indexed named group is still readable by index.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(workers): name capture groups for prefer-named-capture-group
Burns down prefer-named-capture-group violations in lib/workers/.
Used groups get names with $<name> replacement strings; unused
wrapper/alternation groups (e.g. semantic-commit-message.ts's optional
scope/issue wrappers, release-notes.ts's date-heading and
horizontal-rule matchers that are only probed with .search()/replaced
wholesale) become non-capturing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* refactor(test,tools): name capture groups for prefer-named-capture-group
Finishes the prefer-named-capture-group burndown: test/, tools/, and
vitest.config.mts. Groups whose value is read get names ($<name>
replacement strings or .groups.<name> access); groups only used via
.test()/.search() or that feed a .match(/…/g) call (whose return value
is the array of whole matches, not captured groups) become
non-capturing.
This is the last remaining slice of pre-existing violations, so the
rule (already enabled at error repo-wide) now passes with zero
findings across the whole codebase.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RxHFNsSworLcv23xXk9Hk
* fix prettier failure
* refactor(lint): use a named capture group in `v8-ignore-no-count`
New rule from main trips the newly enabled `prefer-named-capture-group` oxlint rule.
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* refactor(linters): add prefer-coerce-array rule
Refs #45217
`x ?? []` and `coerceArray(x)` say the same thing, but only the second
one is searchable and consistent. The rule flags a `??` whose default is
a bare `[]` literal; a non-empty default or an asserted `([] as Foo[])`
still passes.
Applying it across `lib/` surfaced three spots the helper cannot cover,
which keep `?? []` with a disable comment or a narrower fix:
- `package-files.ts` destructures a tuple, which `coerceArray()` widens
- `generate.spec.ts` defaults `matchAll()`, an iterator rather than an array
- `mise/upgradeable-tooling.ts` declares a `Record` return, so its
`?? []` fallback was wrong to begin with and becomes `coerceObject()`
* refactor(platform/github): hoist the GHE version header lookup
`Object.entries(...).find()` returns a tuple, and defaulting it with
`?? []` only to destructure the second element reads as an array
default when it is not one. Name the found entry instead, which drops
the `?? []` rather than routing a tuple through `coerceArray()`.
As noted in #43761, we had recently set `CI=true` for the Renovate and
Containerbase orgs on Mend-hosted apps due to a pnpm v11 requirement:
ERR_PNPM_ABORTED_REMOVE_MODULES_DIR_NO_TTY Aborted removal of
modules directory due to no TTY
If you are running pnpm in CI, set the CI environment variable to
"true", or set "confirmModulesPurge" to "false".
Similarly in #43606, it was noted that we should do this for `mise lock`
to mark the workspace as "trusted".
Although we went with a different situation, there will be cases where
this is useful for tools being executed, for instance when we invoke `yarn`.
We also make sure to keep our documentation up-to-date as we add to the
specific overrides.
With help from Claude Sonnet and Opus to:
- perform some of the mechanical updates as part of this change
- ensure that the Docker sidecar always has `hardcodedProcessEnv` passed
into it
- catch a needed change to `exposeAllEnv` handling
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
Adds a custom oxlint rule renovate/v8-ignore-no-count that flags the
count form '/* v8 ignore next <N> */'. The count is not honored by
vitest's ast-v8-to-istanbul hint parser, which captures only the
keyword (if/else/next/file); 'next' always exempts exactly the next
AST node. Trailing counts therefore suggest a line range that is never
applied and mislead readers.
The rule is autofixable (drops the count, preserving actual behavior)
and has been applied to all existing occurrences.
When executing commands for `binarySource=docker`, we have two areas
that a command could have shell expansion/injection:
- on the host (when constructing the `bash -l -c`)
- in the container (when running a manager-specific command)
When constructing the host's command, we previously would escape the
`"`, which allows Bash syntax for `${VAR}` and `$(...)` syntax inside
it.
While managers use `quote()` to make the inputs safer, the use of `"`
around that would not provide any protection, and lead to cases where
the `quote()` could be expanded on the host, before `docker run`
executes.
After recent changes to each manager - and removal of `shell: true` -
this doesn't seem to be exploitable, but this hardens it further.
Additionally, we never escaped `\`, so a value containing `\"` produces
a command that `shlex.split` rejects, and the update fails rather than
running.
Instead, we can quote the whole `-c` argument with `quote()`, which
round-trips through both `shlex.split` - the default, no-shell path - and
a real shell.
This removes the `lgtm [js/incomplete-sanitization]` suppression as
we're now correctly sanitising this.
Note this doesn't remove the need for the managers to quote their own
values, as the second area above is still a real shell.
Co-authored-by: Claude Opus 5 <jamie.tanna+claude-code@mend.io>
* refactor(types): document `localDir` isn't a `globalOnly` option
To make sure that it's clear when reviewing `GlobalConfig`, as well as
working with our types, we can move the `localDir` definition into a
separate type.
* fixup! refactor(types): document `localDir` isn't a `globalOnly` option
* fixup! refactor(types): document `localDir` isn't a `globalOnly` option
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
* fixup! refactor(types): document `localDir` isn't a `globalOnly` option
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
* fixup! refactor(types): document `localDir` isn't a `globalOnly` option
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
---------
Co-authored-by: Claude Sonnet 5 <jamie.tanna+claude-code@mend.io>
* test: ensure we set `binarySource=global`
As part of future changes, we'll correctly return the default value from
`GlobalConfig.get`, instead of `undefined` if no default is provided in
the `get` call.
As `binarySource=install` is the default, this then leads to these tests
failing, as they're intended to run with `binarySource=global`.
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
* fixup! test: ensure we set `binarySource=global`
* fixup! fixup! test: ensure we set `binarySource=global`
---------
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
* docs: explicitly document `depTypes` each manager supports
A long-standing question we receive is "what `depTypes` can I match
against in my project".
Although the best recommendation we usually have is "check the
`packageFiles with updates" log line (as a very key log line for users),
we can go one step further and try and create a stronger contract.
To do this, I've used Claude Sonnet 4.6 to work through the codebase,
determine areas that a `depType` is set in a manager (statically or
dynamically) and generate a structured, typed, means to document how
they're used.
Through a few iterations of the process, and attempts at human-written
documentation, we've settled on:
- prioritising autogenerated documentation (for humans to read) to note
what `depTypes` are known, and what they are
- `knownDepTypes`, to describe any known, static, `depType`s and their
human-readable meaning
- with the `prettyDepType`, if used
- `supportsDynamicDepTypesNote`, to add a Markdown note to the generated
documentation
While here, we also:
- make sure to note this in the "adding a new package manager"
documentation
- remove any hand-written references to `depTypes` in each manager's
documentation page
- correct the Gleam `depTypes`
- make sure to use the `knownDepTypes`'s `prettyDepType` definition if
we know it, for a given `depType`
The descriptions have been generated by Claude Sonnet, with some
human-written tweaks where appropriate.
[0]: https://github.com/renovatebot/renovate/discussions/15176
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
* fixup! docs: explicitly document `depTypes` each manager supports
* docs(manager): display `depTypes` documentation if none present
For consistency, and to make it more explicit.
---------
Co-authored-by: Claude Sonnet 4.6 <jamie.tanna+claude-code@mend.io>
Sebastian Poxhofer